[French national standard for the treatment of squamous cell carcinoma of upper aero-digestive tract - General principles of treatment]

OBJECTIVES

The management of upper aerodigestive tract cancers is a complex specialty. It is essential to provide an update to establish optimal care. At the initiative of the INCa and under the auspices of the SFORL, the scientific committee, led by Professor Béatrix Barry, Dr. Gilles Dolivet, and Dr. Dominique De Raucourt, decided to develop a reference framework aimed at defining, in a scientific and consensus-based manner, the general principles of treatment for upper aerodigestive tract cancers applicable to all sub-locations.

METHODOLOGY

To develop this framework, a multidisciplinary team of practitioners was formed. A systematic analysis of the literature was conducted to produce recommendations classified by grades, in accordance with the standards of the French National Authority for Health (HAS).

RESULTS

The grading of recommendations according to HAS standards has allowed the establishment of a reference for patient care based on several criteria. In this framework, patients benefit from differentiated care based on prognostic factors they present (age, comorbidities, TNM status, HPV status, etc.), conditions of implementation, and quality criteria for indicated surgery (operability, resectability, margin quality, mutilation, salvage surgery), as well as quality criteria for radiotherapy (target volume, implementation time, etc.). The role of medical and postoperative treatments was also evaluated based on specific criteria. Finally, supportive care must be organized from the beginning and throughout the patients' care journey.

CONCLUSION

All collected data have led to the development of a comprehensive framework aimed at harmonizing practices nationally, facilitating decision-making in multidisciplinary consultation meetings, promoting equality in practices, and providing a state-of-the-art and reference practices for assessing the quality of care. This new framework is intended to be updated every 5 years to best reflect the latest advances in the field.

Engineering Precise Interconnected Porosity in β-Tricalcium Phosphate (β-TCP) Matrices by Means of Top-Down Digital Light Processing

This study evaluated the biocompatibility and accuracy of 3D-printed β-tricalcium phosphate (β-TCP) pure ceramic scaffolds. A specific shaping process associating a digital light processing (DLP) 3D printer and a heat treatment was developed to produce pure β-TCP scaffolds leaving no polymer binder residue. The β-TCP was characterised using X-ray diffraction, infrared spectroscopy and the detection of pollutants. The open porosity of produced matrices and their resorption were studied by hydrostatic weighing and calcium release measures. The biocompatibility of the printed matrices was evaluated by mean of osteoblast cultures. Finally, macroporous cubic matrices were produced. They were scanned using a micro-Computed Tomography scanner (micro-CT scan) and compared to their numeric models. The results demonstrated that DLP 3D printing with heat treatment produces pure β-TCP matrices with enhanced biocompatibility. They also demonstrated the printing accuracy of our technique, associating top-down DLP with the sintering of green parts. Thus, this production process is promising and will enable us to explore complex phosphocalcic matrices with a special focus on the development of a functional vascular network.

Robotic calvarial bone sampling

The aim of this study was to assess the feasibility of complex unicortical calvarial harvesting by using the Cold Ablation Robot-Guided Laser Osteotome (CARLO® primo+). A cadaveric study was performed with a progressive complexity of the bone harvesting. This preliminary study on the cadaveric cranial vault area examined the tracking precision, the strategies, settings and durations of harvesting, the accuracy of the unicortical bone cutting, and the risk of dura exposition. All sampling was realised with no more difficulty than that experienced during the standard procedure. No bicortical cutting occurred during CARLO® primo + robot-guided laser cutting. During the second sampling, dura was partially exposed due to improper angulation of the curved osteotome during harvesting. Complex unicortical calvarial harvesting using robot-guided laser appears to be feasible and safe. In the future, robotic approaches will probably replace current surgical techniques using cutting guides and help reduce intraoperative inaccuracies due to the human factor.

Surgical treatment outcomes of solitary fibrous tumors in the head and neck: A retrospective study

The aim of this study was to better characterize head and neck solitary fibrous tumors (SFTs) and to evaluate surgical treatment. This retrospective study included patients who presented with head and neck SFTs. Clinical, radiological, and histological information and data regarding the treatments performed were collected. The risk of locoregional and distant metastases was calculated, and for orbital SFTs a specific classification was used. Overall, 34 patients were included. The majority of the SFTs were found in the oral cavity (n = 10), followed by the neck region (n = 8). The mean time to recurrence was 67.4 months. All patients underwent primary surgical resection. Recurrence was observed in five patients with a low risk of locoregional recurrence and distant metastasis. The treatment of choice is complete resection. Recurrence seems to be highly correlated with positive surgical margins. The safety margin should be increased when removing the lesion, and long-term follow-up should be performed.

In-house 3D printing: Why, when, and how? Overview of the national French good practice guidelines for in-house 3D-printing in maxillo-facial surgery, stomatology, and oral surgery

3D-printing is part of the daily practice of maxillo-facial surgeons, stomatologists and oral surgeons. To date, no French health center is producing in-house medical devices according to the new European standards. Based on all the evidence-based data available, a group of experts from the French Society of Stomatology, Maxillo-Facial Surgery and Oral Surgery (Société Française de Chirurgie Maxillofaciale, Stomatologie et Chirurgie Orale, SFSCMFCO), provide good practice guidelines for in-house 3D-printing in maxillo-facial surgery, stomatology, and oral surgery. Briefly, technical considerations related to printers and CAD software, which were the main challenges in the last ten years, are now nearly trivial questions. The central current issues when planning the implementation of an in-house 3D-printing platform are economic and regulatory. Successful in-house 3D platforms rely on close collaborations between health professionals and engineers, backed by regulatory and logistic specialists. Several large-scale academic projects across France will soon provide definitive answers to governance and economical questions related to the use of in-house 3D printing.

Access to paediatric palliative care in children and adolescents with complex chronic conditions: a retrospective hospital-based study in Brussels, Belgium

BACKGROUND

Paediatric complex chronic conditions (CCCs) are life-limiting conditions requiring paediatric palliative care, which, in Belgium, is provided through paediatric liaison teams (PLTs). Like the number of children and adolescents with these conditions in Belgium, their referral to PLTs is unknown.

OBJECTIVES

The aim of the study was to identify, over a 5-year period (2010-2014), the number of children and adolescents (0-19 years) living with a CCC, and also their referral to PLTs.

METHODS

International Classification of Disease codes (ICD-9) corresponding to a CCC, as described by Feudtner et al, and national registration numbers were extracted from the databases of all hospitals (n=8) and PLTs (n=2) based in the Brussels region. Aggregated data and pseudonymised national registration number were transmitted to the research team by a Trusted Third Party (eHealth). Ages and diagnostic categories were calculated using descriptive statistics.

RESULTS

Over 5 years (2010-2014) in the Brussels region, a total of 22 721 children/adolescents aged 0-19 years were diagnosed with a CCC. Of this number, 22 533 were identified through hospital registries and 572 through PLT registries. By comparing the registries, we found that of the 22 533 children/adolescents admitted to hospital, only 384 (1.7%) were also referred to a PLT.

CONCLUSION

In Belgium, there may be too few referrals of children and adolescents with CCC to PLTs that ensure continuity of care.

Functional and morphologic outcomes of CAD/CAM-assisted versus conventional microvascular fibular free flap reconstruction of the mandible: A retrospective study of 25 cases

INTRODUCTION

Mandibular reconstruction using fibula free flap has been improved in the last decade with computer-aided design and computer-aided manufacturing (CAD/CAM) but any functional and aesthetic evaluation of their reattempts has been realized. Aim of this retrospective study is to compare functional and morphologic outcomes after mandibular reconstruction with fibula free flap using CAD/CAM or conventional peroperative shaping for mandible reconstruction. Moreover, we compared quality of life, patient and surgery characteristics in the two groups.

PATIENTS AND METHODS

We realized a monocentric retrospective analyzed of 25 cases of unilateral mandibular reconstruction divided in two groups, using CAD/CAM (12 patient) or conventional approach (13 patients) between April 2012 and March. Functional and aesthetic measurements were performed postoperatively.

RESULTS

Mouth opening, laterotrusion and protrusion of the mandible seemed to be improved in CAD/CAM group compared with conventional group but did not differ significantly. Quality of life, bite force, masticatory ability, eating and chewing satisfaction, appearance and social activity satisfaction did not differ significantly in the two groups.

CONCLUSION

Even if no superiority has been established for CAD/CAM group regarding functional and aesthetic outcomes, a prospective design of future studies and transdisciplinary approach should improve our data and their interpretations. Thus, the integration of virtual planning and guided surgery is definitely of significant value and must be considered in complex maxillofacial reconstructions.

Influence of preoperative imaging on fibula free flap harvesting

INTRODUCTION

The fibula free flap (FFF) is the gold standard for the reconstruction of large maxillofacial defects. Magnetic resonance angiography (MRA) seems to supersede digital subtraction angiography (DSA) as the reference in preoperative evaluation, being non-invasive and having equivalent diagnostic results. The aim of this study was to assess the impact of preoperative MRA versus DSA on the viability of FFF and its success rate.

MATERIAL AND METHODS

A total of 216 patients, who underwent mandibular or maxillary FFF reconstruction from January 1995 to January 2011, were retrospectively included in the study. Of them, 101 patients underwent preoperative DSA and 115 underwent MRA. Recorded criteria were as follows: age, sex, tobacco consumption, defect etiology, preoperative vascular assessment, donor-site choice and flap failure. The DSA group was compared to the MRA group.

RESULTS

The harvested side was switched in 15.7% of cases with preoperative MRA versus 4% with DSA. Our success rate was higher (96.1%) with MRA than with DSA (88.1%) (P<0.05). More atherosclerotic patients (P=0.004) were diagnosed through MRA. MRA and DSA showed similar results in anatomical variation detection.

CONCLUSION

MRA is less invasive and more effective in atherosclerosis detection than DSA. Therefore, donor-site switching was more frequent in the MRA group, which led to a better success rate. MRA should replace DSA as the reference in preoperative assessment.

Mandibular reconstruction after cancer: an in-house approach to manufacturing cutting guides

The restoration of mandibular bone defects after cancer can be facilitated by computer-assisted preoperative planning. The aim of this study was to assess an in-house manufacturing approach to customized cutting guides for use in the reconstruction of the mandible with osteocutaneous free flaps. A retrospective cohort study was performed, involving 18 patients who underwent mandibular reconstruction with a fibula free flap at three institutions during the period July 2012 to March 2015. A single surgeon designed and manufactured fibula and mandible cutting guides using a computer-aided design process and three-dimensional (3D) printing technology. The oncological outcomes, production parameters, and quality of the reconstructions performed for each patient were recorded. Computed tomography scans were acquired after surgery, and these were compared with the preoperative 3D models. Eighteen consecutive patients with squamous cell carcinoma underwent surgery and then reconstruction using this customized in-house surgical approach. The lengths of the fibula bone segments and the angle measurements in the simulations were similar to those of the postoperative volume rendering (P=0.61). The ease of access to 3D printing technology has enabled the computer-aided design and manufacturing of customized cutting guides for oral cancer treatment without the need for input from external laboratories.

Nuclear accumulation of anthracyclines in the endothelium studied by bimodal imaging: fluorescence and Raman microscopy

Anthracycline antibiotics display genotoxic activity towards cancer cells but their clinical utility is limited by their cardiac and vascular toxicity. The aim of this study was to develop a Raman-based methodology to study the nuclear accumulation of anthracyclines in the endothelium. For this purpose bimodal confocal Raman and fluorescence imaging was used to monitor cellular composition changes as a result of anthracycline exposure on endothelial cells (EA.hy926), and nuclear drug accumulation, respectively. Simultaneously effects of anthracyclines on endothelium viability were investigated by caspases-3 and -7 and MTT assays. We demonstrated that nuclear accumulation of DOX and EDOX was similar; however, EDNR accumulated in endothelial nuclei at concentrations 10 times higher than DNR. In turn, epimers of DOX or DNR were both consistently less toxic on the endothelium as compared to their congeners as evidenced by MTT and caspase assays. In summary, bimodal Raman and fluorescence-based nucleus profiling proves to be a valuable tool to study structure-activity relationship of nuclear accumulation and toxicity of anthracyclines in endothelium.

Symphyseal distraction in the context of orthodontic treatment: a series of 35 cases

INTRODUCTION

Use of symphyseal distraction osteogenesis to treat a mandibular bone deficit with tooth-jaw discrepancy due to lack of space makes it possible to avoid the risks associated with the techniques usually envisaged (stripping, labioversion of incisors, extractions).

PATIENTS AND METHOD

This retrospective study presents the symphyseal distraction technique used in the maxillofacial surgery department of Lille University Hospital between January 1998 and March 2013. Treatment efficacy, complications and the stability of results were all evaluated.

RESULTS

Thirty-five patients were included in the study. The gain of inter-mental-foramen space was on average 7 mm (3-12, standard deviation 1.8 mm). A good occlusal result with dental Class I and no labioversion of the lower incisors was obtained in 27 of the 35 patients (77%).

CONCLUSION

Mandibular distraction by symphyseal osteotomy seems to be a quick, safe treatment for an anterior transversal mandibular deficit giving results that are stable over time. Its success depends on good collaboration between the orthodontist and the surgeon, and on strict patient selection.

[Comparative effectiveness of maxillomandibular advancement surgery versus mandibular advancement device for patients with moderate or severe obstructive sleep area]

INTRODUCTION

Currently, positive airway pressure is the gold standard treatment of obstructive sleep apnea (OSA). Unfortunely, adherence rates are poor. Alternative therapies are mandibular advancement device (MAD) and maxillomandibular advancement (MMA).

PATIENTS

This retrospective study compared both treatment effectiveness on patients with moderate and severe OSA from January 2005 to September 2012, and carried out predictive factor of effectiveness. We defined therapeutic success as an apnea hypopnea index (AHI) less than 15 per hour and at least a 50% reduction of the initial index. The difference in effectiveness has been studied using regression logistic adjusted on MAD versus MMA propensity score.

RESULTS

This study included 198 patients. 37 were treated by MMA, and 161 with MAD. MMA treatment was significantly more efficient than MAD treatment with an odds ratio of 3.22; CI95% 1.31Γ7.82 (p = 0.011). Younger age and lower initial AHI were predictive of increased success. There was no significant interaction between the treatment and morphologic patient factors.

CONCLUSION

In our sample of patients, MMA surgery was significantly more efficient than MAD treatment for the patients with moderate or severe OSA. No morphologic characteristic was identified to determine which patients would benefit most from MAD versus MMA surgery.

[Condylar hyperplasia: qualitative and quantitative study of temporomandibular joints remodeling before and after condylectomy]

PURPOSE

This retrospective study aimed to evaluate bone remodeling of temporo-mandibular joints (TMJ) using computed tomography (CT) before and after condylectomy for condylar hyperplasia.

MATERIAL AND METHOD

TMJ bone remodeling was studied by comparing the pre and postoperative CT scan of ten patients. Qualitative evaluation was performed by two-dimensional analysis. Three-dimensional analysis superimpositions were done after digital condylar units isolation. Condylar volume modifications were measured and compared on both sides. Lastly, before and after surgery, we studied the radio-clinic correlations.

RESULTS

After surgery, all the operated condyles developed a new cortical bone. We noticed also a thickening of the glenoid fossa. Surgical condylectomy leaded to a 43.5% volume reduction on the operated side and 2.14% on the controlateral side. On the controlateral side, most of abnormalities seen preoperatively disappeared after surgery. For two patients, the condylar resection took away over 80% of the initial volume. For these patients, we observed major radiologic modifications on the controlateral TMJ associated with symptoms of dysfunction. These problems did not worsen their quality of life.

CONCLUSION

Both TMJ presented with bone remodelling after condylectomy. In condylar hyperplasia, condylectomy provides orthopaedic results on dysmorphia and removal of the pathological prechondroblastic zone. In the future, an earlier detection of this pathology may help the surgeon to treat in childhood. This would limit surgical excision and would avoid important dysmorphia.

[Extended resection and radiotherapy for primary intraosseous maxillary carcinoma]

INTRODUCTION

Primary intraosseous maxillary carcinoma is a rare squamous cell carcinoma developing from remnants of the odontogenic epithelium. Risk factors are unknown and it may occur at any age. Little epidemiological data is available and few series include a sufficient number of patients. We assessed the prognosis of these tumors after wide exeresis (margin of 2 cm) followed by adjuvant radiotherapy.

METHODS

We reviewed the treatment and outcome data in nine cases of primary intraosseous maxillary carcinoma from 1995 to 2010. The WHO diagnostic criteria were used. We analyzed the demographic, clinical, and radiological data, as well as the type of treatment and the outcome of patients.

RESULTS

The gender ratio was 3.5/1, and the mean age 40.2 years. The most frequent presentation was a unilocular osteolytic lesion with an irregular contour, between 24 and 60 mm, in the mandibular angle. Extended tumor resection was performed in all patients. Reconstruction was performed with a fibula flap in seven patients. Five patients underwent adjuvant radiotherapy. The survival rate at 2 years was 100%. The mean follow-up was 6.9 years (2-14 years) at the end of the study. Two patients were treated for a relapse and one died after 3 years of follow-up.

DISCUSSION

The combined treatment was efficient on primary intraosseous maxillary carcinoma. The diagnosis is made with strict clinical, radiological, and histological criteria. The intraosseous location of these tumors requires an early diagnosis and aggressive treatment combining broad exeresis followed by adjuvant radiotherapy to avoid recurrence and have an optimal survival rate.

Deep subthreshold Xi;{-} production in Ar + KCl reactions at 1.76A GeV

We report first results on a deep subthreshold production of the doubly strange hyperon Xi;{-} in a heavy-ion reaction. At a beam energy of 1.76A GeV the reaction Ar + KCl was studied with the High Acceptance Di-Electron Spectrometer at SIS18/GSI. A high-statistics and high-purity Lambda sample was collected, allowing for the investigation of the decay channel Xi;{-} --> Lambdapi;{-}. The deduced Xi;{-}/(Lambda + Sigma;{0}) production ratio of (5.6 +/- 1.2_{-1.7};{+1.8}) x 10;{-3} is significantly larger than available model predictions.