Evaluation of a ureteral catheter coating by means of a BioEncrustation in vitro model

Biomaterials for applications in the urinary tract are challenged with both biofilm formation and encrustation, two highly interconnected processes. While great effort has been achieved developing promising materials there is only a limited choice of sophisticated in vitro models that are available to analyse the performance of biomaterials prior to performing delicate and expensive in vivo studies. In this study we present a complex BioEncrustation model that imitates both the processes of multi-species biofilm formation and encrustation in vitro. The resulting crystalline biofilms are compared to the deposits found on explanted ureteral stent surfaces (in vivo situation) and to deposits formed in an experimental set up that does not contain bacteria (Encrustator®). Further focus of this study is dedicated to employing the developed BioEncrustation model to evaluate the effect multifunctional coatings impose on the processes of biofilm formation and encrustation under in vitro conditions. The investigated TANP coating combines unspecific and broad band specific antibacterial properties with a degrading polymer matrix that is intended to inhibit crystal formation. The coating was prepared on both polyurethane and silicone tubes and the subsequent results of the in vitro BioEncrustation analyses reveal a promising potential for employing the coating to render ureteral stent surfaces more biocompatible.

Preparation, characterization and in silico modeling of biodegradable nanoparticles containing cyclosporine A and coenzyme Q10

Combination therapy will soon become a reality, particularly for those patients requiring poly-therapy to treat co-existing disease states. This becomes all the more important with the increasing cost, time and complexity of the drug discovery process prompting one to look at new delivery systems to increase the efficacy, safety and patient compliance of existing drugs. Along this line, we attempted to design nano-scale systems for simultaneous encapsulation of cyclosporine A (CsA) and coenzyme Q10 (CoQ10) and model their encapsulation and release kinetics. The in vitro characterization of the co-encapsulated nanoparticles revealed that the surfactant nature, concentration, external phase volume, droplet size reduction method and drug loading concentration can all influence the overall performance of the nanoparticles. The semi-quantitative solubility study indicates the strong influence of CoQ10 on CsA entrapment which was thought to be due to an increase in the lipophilicity of the overall system. The in vitro dissolution profile indicates the influence of CoQ10 on CsA release (64%) to that of individual particles of CsA, where the release is faster and higher (86%) on 18th day. The attempts to model the encapsulation and release kinetics were successful, offering a possibility to use such models leading to high throughput screening of drugs and their nature, alone or in combination for a particular polymer, if chi-parameters are understood.

Design of Estradiol Loaded PLGA Nanoparticulate Formulations: A Potential Oral Delivery System for Hormone Therapy

Estradiol (E2), a highly lipophilic molecule with good oral absorption but poor oral bioavailability, was incorporated into poly(lactide-co-glycolide) (PLGA) nanoparticles to improve its oral bioavailability. Nanoparticles were prepared by using polyvinyl alcohol (PVA) or didodecyldimethylammonium bromide (DMAB) as stabilizer, leading to negatively (size 410.9+/-39.4 nm) and positively (size 148.3+/-10.7 nm) charged particles, respectively. Both preparations showed near zero order release in vitro with about 95% drug being released within 45 and 31 days for PVA and DMAB, respectively. In situ intestinal uptake studies in male Sprague-Dawley (SD) rats showed higher uptake of DMAB stabilized nanoparticles. Following oral administration to male SD rats, E2 could be detected in blood for 7 and 2 days from DMAB and PVA stabilized nanoparticles, respectively. Histopathological examination and blood counts indicated the absence of inflammatory response. These data suggest that DMAB stabilized PLGA nanoparticles have great potential as carriers for oral delivery of estradiol.

Cationic poly(lactide-co-glycolide) nanoparticles as efficient in vivo gene transfection agents

Poly(lactide-co-glycolide) (PLGA), a biocompatible and biodegradable polyester co-polymer of PLA and PGA, has been recognized for its ability to deliver genes. However, gene delivery by PLGA nanoparticles is limited by their negative charge and their poor transport through mucosal barriers. In this study, PLGA nanoparticles were surface modified with cationic chitosan in an effort to improve their gene delivery capability. PLGA nanoparticles were synthesized by emulsion-diffusion-evaporation technique using PVA-chitosan (PLGA1) or PVA-chitosan-PEG (PLGA2) blend as stabilizers. This method is reproducible and produces nanoparticles with hydrodynamic diameter <200 nm. The nanoparticles were characterized by zetasizer, photon correlation spectroscopy and atomic force microscopy. A549 epithelial cells were transfected in vitro with PLGA particles complexed with a reporter plasmid encoding green fluorescent protein. PLGA particles transferred EGFP gene, but were less efficient than the lipofectamine control. The nanoparticles were also tested for their ability to transport across the nasal mucosa in vivo in mice. The results show that both PLGA1 and PLGA2 facilitate gene delivery and expression in vivo with increased efficiency and without causing inflammation, as measured by IL-6. Together, these results indicate that chitosan-modified PLGA nanoparticles have greater potential as gene carriers.

Cationic silica nanoparticles as gene carriers: synthesis, characterization and transfection efficiency in vitro and in vivo

The potential of cationic SiO2 nanoparticles was investigated for in vivo gene transfer in this study. Cationic SiO2 nanoparticles with surface modification were generated using amino-hexyl-amino-propyltri-methoxysilane (AHAPS). The zeta potential of the nanoparticles at pH = 7.4 varied from -31.4 mV (unmodified particles; 10 nm) to +9.6 mV (modified by AHAPS). Complete immobilization of DNA at the nanoparticle surface was achieved at a particle ratio of 80 (w/w nanoparticle/DNA ratio). The surface modified nanoparticle had a size of 42 nm with a distribution from 10-100 nm. The ability of these particles to transfect pCMVbeta reporter gene was tested in Cos-1 cells, and optimum results were obtained in the presence of FCS and chloroquine at a particle ratio of 80. These nanoparticles were tested for their ability to transfer genes in vivo in the mouse lung, and a two-times increase in the expression levels was found with silica particles in comparison to EGFP alone. Very low or no cell toxicity was observed, suggesting silica nanoparticles as potential alternatives for gene transfection.

Self-Assembling Nanocomplexes from Insulin and Water-Soluble Branched Polyesters, Poly[(vinyl-3-(diethylamino)- propylcarbamate-co-(vinyl acetate)-co-(vinyl alcohol)]-graft- poly(l-lactic acid): A Novel Carrier for Transmucosal Delivery of Peptides

The design of carriers for protein delivery that provide protection against enzymatic degradation and facilitate protein transport across epithelial surfaces, thus avoiding parenteral administration, remains a challenge. Self-assembling nanoscale protein/polymer complexes might present a promising approach. We synthesized water-soluble, amphiphilic polyesters, poly[(vinyl-3-(diethylamino)-propylcarbamate-co-(vinyl acetate)-co-(vinyl alcohol)]-graft-poly(L-lactic acid), containing a positively charged backbone, and studied the spontaneous formation of nanocomplexes (NC) with insulin. NC were characterized using dynamic light scattering, zeta-potential measurements, and atomic force microscopy (AFM). Insulin loading was determined with HPLC, and the binding constants were obtained by isothermal titration calorimetry (ITC). The NC formation was followed using nephelometric and light scattering techniques. Water-soluble, positively charged, branched polyesters with amphiphilic properties were obtained in a three-step polymer-analogous reaction. The degree of amine substitution, DS, in the PVAL backbone was varied between 0.04 and 0.5, and grafting this backbone with L-lactide increased the molecular weight from 18 kDa to 81 kDa. The polymer composition was optimized to facilitate NC formation with insulin resulting in a DS of 0.09 and a poly(L-lactide) side chain substitution of 0.5 with an average chain length of two lactic acids. Depending on polymer composition, stable NC of 200-500 nm diameter were formed with insulin, and the binding constants ranged from 4.7 x 10(5) to 9.5 x 10(6) M(-1). Positively charged surface charges ranging from +5 to +35mV and an insulin loading up to 98% of 33 IU/mL were obtained. The NC visualized by AFM revealed spheroidal particles with an entangled internal structure. It was demonstrated that this class of multifunctional polymers is capable of self-assembly with a peptidic substrate. The resulting nanosized complexes offer the potential for mucosal insulin/protein delivery and merit further investigations under in vivo conditions.

Preparation and characterization of cationic PLGA nanospheres as DNA carriers

Nanoparticles formulated from biodegradable polymers such as poly(lactic acid) (PLA) and poly(lactide-co-glycolide) (PLGA) are being extensively investigated as non-viral gene delivery systems due to their controlled release characteristics and biocompatibility. PLGA nanoparticles for DNA delivery are mainly formulated by an emulsion-solvent evaporation technique using PVA as a stabilizer generating negatively charged particles and heterogeneous size distribution. The objective of the present study was to formulate cationically modified PLGA nanoparticles with defined size and shape that can efficiently bind DNA. An Emulsion-diffusion-evaporation technique to make cationic nanospheres composed of biodegradable and biocompatible co-polyester PLGA has been developed. PVA-chitosan blend was used to stabilize the PLGA nanospheres. The nanospheres were characterized by atomic force microscopy (AFM), photon-correlation spectroscopy (PCS), and Fourier transform infrared spectroscopy (FTIR). Zeta potential and gel electrophoresis studies were also performed to understand the surface properties of nanospheres and their ability to condense negatively charged DNA. The designed nanospheres have a zeta potential of 10mV at pH 7.4 and size under 200nm. From the gel electrophoresis studies we found that the charge on the nanospheres is sufficient to efficiently bind the negatively charged DNA electrostatically. These cationic PLGA nanospheres could serve as potential alternatives of the existing negatively charged nanoparticles.

Stabilisation by freeze-drying of cationically modified silica nanoparticles for gene delivery

Core shell silica particles with a hydrodynamic diameter of 28nm, an IEP of 7.1 and a zeta potential of +35mV at pH 4.0 were synthesised. The role of freeze-drying for the conservation of zwitterionic nanoparticles and the usefulness of different lyoprotective agents (LPA) for the minimisation of particle aggregation were studied. The activity of the nanoparticles was measured as DNA-binding capacity and transfection efficiency in Cos-1 cells before and after lyophilisation. It was found that massive aggregation occurred in the absence of LPA. Of the various LPAs screened in the present investigations, trehalose and glycerol were found to be well suited for conservation of cationically modified silica nanoparticles with simultaneous preservation of their DNA-binding and transfection activity in Cos-1 cells.

Cationic solid-lipid nanoparticles can efficiently bind and transfect plasmid DNA

The suitability of cationically modified solid-lipid nanoparticles (SLN) as a novel transfection agent was investigated. SLN were produced by hot homogenisation using either Compritol ATO 888 or paraffin as matrix lipid, a mixture of Tween 80 and Span 85 as tenside and either EQ1 (N,N-di-(beta-steaorylethyl)-N,N-dimethylammonium chloride) or cetylpyridinium chloride as charge carrier. The resulting particles were approximately 100 nm in size and showed zeta potentials around +40 mV at pH 7.4. DNA binding was tested by agarose gel electrophoresis. The resulting SLN-DNA complexes were further characterised by AFM and zeta potential measurements. Only the SLN batch SII-13, composed of 4% Compritol, 4% Tween/Span and 1% EQ1, was able to form stable complexes with DNA. Typical complexes were 300 to 800 nm in size. Cytotoxicity and transfection efficiency was tested in vitro on Cos-1 cells. Cationic SLN produced by modification with EQ1 were well tolerated, with LD50 values >3 mg/ml in the LDH release assay and >0.6 mg/ml in the WST-1 assay. Further, SLN-DNA complexes containing between 10 and 200 weight equivalents of SII-13 (matrix lipid) efficiently transfected the galactosidase expression plasmid pCMVbeta in the absence and presence of the endosomolytic agent chloroquine.

A nonviral DNA delivery system based on surface modified silica-nanoparticles can efficiently transfect cells in vitro

Diverse polycationic polymers have been used as nonviral transfection agents. Here we report the ability of colloidal silica particles with covalently attached cationic surface modifications to transfect plasmid DNA in vitro and make an attempt to describe the structure of the resulting transfection complexes. In analogy to the terms lipoplex and polyplex, we propose to describe the nanoparticle-DNA complexes by the term "nanoplex". Three batches, Si10E, Si100E, and Si26H, sized between 10 and 100 nm and with zeta potentials ranging from +7 to +31 mV at pH 7.4 were evaluated. The galactosidase expression plasmid DNA pCMVbeta was immobilized on the particle surface and efficiently transfected Cos-1 cells. The transfection activity was accompanied by very low cytotoxicity, with LD(50) values in the milligrams per milliliter range. The most active batch, Si26H, was produced by modification of commercially available silica particles with N-(6-aminohexyl)-3-aminopropyltrimethoxysilane, yielding spherical nanoparticles with a mean diameter of 26 nm and a zeta potential of +31 mV at pH 7.4. Complexes of Si26H and pCMVbeta plasmid DNA formed at w/w ratios of 10 were most effective in promoting transfection of Cos-1 cells in the absence of serum. At this ratio, >90% of the DNA was associated with the particles, yielding nanoplexes with a net negative surface charge. When the transfection medium was supplemented with 10% serum, maximum gene expression was observed at a w/w ratio of 30, at which the resulting particle-DNA complexes possessed a positive surface charge. Transfection was strongly increased in the presence of 100 microM chloroquine in the incubation medium and reached approximately 30% of the efficiency of a 60 kDa polyethylenimine. In contrast to polyethylenimine, no toxicity was observed at the concentrations required. Atomic force microscopy of Si26H-DNA complexes revealed a spaghetti-meatball-like structure. The surface of complexes prepared at a w/w ratio of 30 was dominated by particles half-spheres. Complex sizes correlated well with those determined previously by dynamic light scattering.

Lipoplex formation under equilibrium conditions reveals a three-step mechanism

Cellular transfection can be accomplished by the use of synthetic amphiphiles as gene carrier system. To understand the mechanism and hence to improve the efficiency of transfection, insight into the assembly and properties of the amphiphile/gene complex is crucial. Here, we have studied the interaction between a plasmid and cationic amphiphiles, using a monolayer technique, and have examined complex assembly by atomic force microscopy. The data reveal a three-step mechanism for complex formation. In a first step, the plasmids, interacting with the monolayer, display a strong tendency of orientational ordering. Subsequently, individual plasmids enwrap themselves with amphiphile molecules in a multilamellar fashion. The size of the complex formed is determined by the supercoiled size of the plasmid, and calculations reveal that the plasmid can be surrounded by 3 to 5 bilayers of the amphiphile. The eventual size of the transfecting complex is finally governed by fusion events between individually wrapped amphiphile/DNA complexes. In bulk phase, where complex assembly is triggered by mixing amphiphilic vesicles and plasmids, a similar wrapping process is observed. However, in this case, imperfections in this process may give rise to a partial exposure of plasmids, i.e., part of the plasmid is not covered with a layer of amphiphile. We suggest that these exposed sites may act as nucleation sites for massive lipoplex clustering, which in turn may affect transfection efficiency.

Monomolecular organization of the main tetraether lipid from Thermoplasma acidophilum at the water-air interface

The monomolecular organization of the main tetraether phospholipid from the archaeon Thermoplasma acidophilum was studied by means of a Langmuir film balance integrated into a fluorescence microscope. After transfer to solid surfaces at different pressures the films were further investigated by ellipsometry, small angle X-ray scattering and atomic force microscopy. In order to complete former results about the main tetraether phospholipid of T. acidophilum [Strobl, C., Six, L., Heckmann, K., Henkel, B., Ring, K., 1985. Z. Naturforsch. 40c, 219-222], the thickness and the two-dimensional organization of the monomolecular films were investigated. Two mean heights values were determined, one of 1.5-1.8 nm and another one of 4-5 nm, indicative for two different molecular arrangements. The former one is interpreted as a 'horseshoe' organization with two polar endings in the aqueous subphase, whereas the latter appears to represent the upright population of molecules with one polar end in the subphase and the other one in the air. In freshly spread and compressed films small domains of the upright lipid population are initially observed, which enlarge with increasing pressure. These domains are no longer existent after 12 h of spreading without compression.

Investigation of the orientation of purple membrane sheets in Langmuir-Blodgett films by a quartz crystal microbalance

By means of the quartz crystal microbalance (QCM), a convenient method was developed to determine the degree of orientation of purple membrane (PM) sheets on the air/water interface. Langmuir-Blodgett films from both wild-type and SH-mutant PM (bR D36C) were vertically deposited on the surface of gold-sputtered AT-cut quartz crystals. The shift of resonance frequency of the QCM during a special washing protocol allowed us to differentiate between physically adsorbed PM fragments and any PM attached to the gold surface via chemical bonds. By washing with organic solvents, complete desorption of the wild-type PM was achieved, whereas for the SH-mutant, approximately 60% of the PM fragments could not be detached from the surface. These PM sheets should be oriented with the cytoplasmic side facing the water subphase to that their SH-groups can chemically bind to the gold surface of the quartz plate.

Targetability of novel immunoliposomes prepared by a new antibody conjugation technique

In order to develop long-circulating immunoliposomes (IL), which combine sterical stabilization with a superior targetability, we have introduced a new methodology for attaching monoclonal antibodies directly onto the distal ends of liposome-grafted polyethylene glycol (PEG) chains. Therefore, we have synthesized a new PEG-PE derivative, which had been endgroup-functionalized with cyanuric chloride. Antibodies can simply be coupled to this membrane anchor in mild basic conditions (pH 8.8) without the need for previous antibody derivatizations. The coupling results have been determined with consideration to various liposome parameters and have been compared to several established antibody coupling procedures, where antibodies had been linked directly to the liposome surface in the presence of PEG (conventional IL). To investigate the targetability of the resulting new IL, anti E-selectin mAb have been coupled and the degree of binding selectin-containing cells has been analyzed. The terminal coupled antibodies show a 1.8-fold higher degree of in vitro cell binding compared to conventional IL, which has been attributed to the antibody position being more easy accessible at the PEG termini. Furthermore, we have illustrated the liposome surface topology and the coupled antibodies by atomic force microscopy, which for such fluid IL has been used first. These images have finely corresponded to the cell binding results, and have been discussed in terms of antibody position and flexibility at the liposome surface.

The role of glycolipids in mediating cell adhesion: a flow chamber study

Selectins constitute a family of proteins that mediate leukocyte tethering and rolling along the vascular endothelium by recognizing various carbohydrate ligands in response to inflammation. To test the hypothesis that multivalent binding of selectins to their ligands is the molecular basis for achieving sufficient binding forces, we have performed this flow chamber study. Selectin-containing Chinese hamster ovarial cells (CHO-E) bind and roll along a support-fixed phospholipid membrane containing a defined concentration of a synthetic Sialyl Lewisx (sLex) glycolipid ligand. Ligands are either homogeneously distributed, or arranged in defined lateral clusters, as illustrated here for the first time. The lateral glycolipid clusters which appear as recognition motifs are essential for mediating cell rolling. Furthermore, the transition from firm cell adhesion to cell rolling depends on the site density of ligands. Rolling velocity shows little dependence on shear forces within a broad range. As we found out that cells do not roll along the model membranes with homogeneous ligand distribution, our results therefore support the hypothesis of multivalent binding events. Since these investigations suggest that lipid-anchored sLex, functionally embedded in a lipid matrix, can mediate cell rolling, this study demonstrates the relationship between dynamic glycolipid binding to selectins with the hypothesis of multivalency of binding for the first time.