[Occupational hazards and risk assessment of benzene-related enterprises in yangzhou city from 2014 to 2018]

Objective: To investigate the benzene concentration in the workplace of benzene-related enterprises in Yangzhou City from 2014 to 2018, and the abnormal blood routine of workers exposed to benzene, and to assess their occupational hazards. Methods: The environmental monitoring data of benzene-related enterprises and the health examination data of benzene exposed workers were collected in March 2019. The inhalation risk assessment model of the National Environmental Protection Agency (EPA) was used to assess the carcinogenic and non-carcinogenic risks of benzene workers. Results: The qualified rate of benzene detection in the workplace was 100% from 2014 to 2018, the highest concentration was 1.42 mg/m(3) in five years. The abnormal rates of blood routine detection in benzene exposed workers in five years was 7.10% (213/2 998) 、5.17% (218/4 214) 、5.61% (196/3 493) 、7.65% (288/3 767) 、7.83% (280/3 574) and 7.83%. respectively. The results of risk assessment showed that the minimum carcinogenic risk value was 7.56×10(-6) and the maximum carcinogenic risk value was 31.33×10(-6) in 2014-2018. The hazard quotient values were than 1. Conclusion: Benzene monitoring concentration in benzene-related enterprises in Yangzhou City from 2014 to 2018 was low, which meets the occupational exposure limit in China. However, the abnormal rate of blood routine in five years is still high, and there are both carcinogenic and non-carcinogenic risks. We should pay more attention to the health risk of workers exposed to low concentrat in benzene.

Identification and functional characterization of microRNAs reveal a potential role in gastric cancer progression

PURPOSE

To investigate the potential candidate microRNA (miRNA) biomarkers for the clinical diagnosis, classification, and prognosis of gastric cancer (GC).

METHODS

We use bioinformatics overlapping subclasses analysis to find the tumor grade and lymphatic metastasis-related GC specific miRNAs from the Cancer Genome Atlas (TCGA) database. Then, we further investigated these GC specific miRNAs distributions in different GC clinical features and their correlations overall survival on the basis of GC patients' information and their related RNA sequencing profile from TCGA. Finally, we randomly selected some of key miRNAs use qRT-PCR to confirm the reliability and validity.

RESULTS

22 GC specific key miRNAs were identified (Fold-change >2, P < 0.05), 11 of them were discriminatively expressed with tumor size, grade, TNM stage and lymphatic metastasis (P < 0.05). In addition, nine miRNAs (miR-196b-5p, miR-135b-5p, miR-183-5p, miR-182-5p, miR-133a-3p, miR-486-5p, miR-144-5p, miR-129-5p and miR-145-5p) were found to be significantly associated with overall survival (log-rank P < 0.05). Finally, four key miRNAs (miR-183-5p, miR-486-5p, miR-30c-2-3p and miR-133a-3p) were randomly selected to validation and their expression levels in 53 newly diagnosed GC patients by qRT-PCR. Results showed that the fold-changes between TCGA and qRT-PCR were 100 % in agreement. We also found miR-183-5p and miR-486-5p were significantly correlated with tumor TNM stage (P < 0.05), and miR-30c-2-3p and miR-133a-3p were associated with tumor differentiation degree and lymph-node metastasis (P < 0.05). These verified miRNAs clinically relevant, and the bioinformatics analysis results were almost the same.

CONCLUSION

These key miRNAs may functions as potential candidate biomarkers for the clinical diagnosis, classification and prognosis for GC.

Colorimetric detection of DNA damage by using hemin-graphene nanocomposites

A colorimetric method for detection of DNA damage was developed by using hemin-graphene nanosheets (H-GNs). H-GNs were skillfully synthesized by adsorping of hemin on graphene through π-π interactions. The as-prepared H-GNs possessed both the ability of graphene to differentiate the damage DNA from intact DNA and the catalytic action of hemin. The damaged DNA made H-GNs coagulated to different degrees from the intact DNA because there were different amount of negative charge exposed on their surface, which made a great impact on the solubility of H-GNs. As a result, the corresponding centrifugal supernatant of H-GNs solution showed different color in the presence of 3,3',5,5'-tetramethylbenzidine (TMB) and H2O2, which could be discriminated by naked eyes or by ultraviolet (UV)-visible spectrometer. Based on this, the damaged effects of styrene oxide (SO), NaAsO2 and UV radiation on DNA were studied. Results showed that SO exerted most serious damage effect on DNA although all of them damaged DNA seriously. The new method for detection of DNA damage showed good prospect in the evaluation of genotoxicity of new compounds, the maximum limit of pesticide residue, food additives, and so on, which is important in the fields of food science, pharmaceutical science and pesticide science.

Microsatellite analysis revealed genetic diversity and population structure among Chinese cashmere goats

Most cashmere goats are found in northern China and Mongolia. They are regarded as precious resources for their production of high quality natural fibre for the textile industry. It was the first time that the genetic diversity and population structure of nine Chinese cashmere populations has been assessed using 14 ISAG/FAO microsatellite markers. In addition, two Iranian populations and one West African goat population were genotyped for comparison. Results indicated that the genetic diversity of Chinese cashmere goats was rich, but less than those of the Iranian goat populations. All pairwise F(ST) values between the Chinese cashmere goat populations reached a highly significant level (P < 0.001), suggesting that they should all be considered as separate breeds. Finally, clustering analysis divided Chinese cashmere goats into at least two clusters, with the Tibetan Hegu goats alone in one cluster. An extensive admixture was detected among the Chinese goat breeds (except the Hegu), which have important implications for breeding management.

XPS and biocompatibility studies of titania film on anodized NiTi shape memory alloy

A dense titania film is fabricated in situ on NiTi shape memory alloy (SMA) by anodic oxidation in a Na(2)SO(4) electrolyte. The microstructure of the titania film and its influence on the biocompatibility of NiTi SMA are investigated by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), inductively coupled plasma mass spectrometry (ICPMS), hemolysis analysis, and platelet adhesion test. The results indicate that the titania film has a Ni-free zone near the surface and can effectively block the release of harmful Ni ions from the NiTi substrate in simulated body fluids. Moreover, the wettability, hemolysis resistance, and thromboresistance of the NiTi sample are improved by this anodic oxidation method.

Surface structure and properties of biomedical NiTi shape memory alloy after Fenton's oxidation

Fenton's oxidation is traditionally used to remove inorganic and organic pollutants from water in waster water treatment. It is an advanced oxidation process in which H2O2 is catalytically decomposed by ferrous irons into hydroxyl radicals (*OH) which have a higher oxidation potential (2.8V) than H2O2. In the work reported here, we for the first time use Fenton's oxidation to modify the surface of biomedical NiTi shape memory alloy (SMA). The influences of Fenton's oxidation on the surface microstructure, blood compatibility, leaching of harmful Ni ions and corrosion resistance in simulated body fluids is assessed using scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, inductively coupled plasma mass spectrometry, electrochemical tests, hemolysis analysis and the blood platelet adhesion test. The mechanical stability of the surface titania film produced by Fenton's oxidation as well as their effects on the shape memory behavior of the SMA are studied by bending tests. Our results show that Fenton's oxidation produces a novel nanostructured titania gel film with a graded structure on the NiTi substrate without an intermediate Ni-rich layer that is typical of high-temperature oxidation. Moreover, there is a clear Ni-free zone near the top surface of the titania film. The surface structural changes introduced by Fenton's oxidation improve the electrochemical corrosion resistance and mitigate Ni release. The latter effects are comparable to those observed after oxygen plasma immersion ion implantation reported previously and better than those of high-temperature oxidation. Aging in boiling water improves the crystallinity of the titania film and further reduces Ni leaching. Blood platelet adhesion is remarkably reduced after Fenton's oxidation, suggesting that the treated SMA has improved thrombo resistance. Enhancement of blood compatibility is believed to stem from the improved hemolysis resistance, the surface wettability and the intrinsic electrical characteristics of the titania film. The titania film produced by Fenton's oxidation has good mechanical stability and does not adversely impact the shape memory behavior of NiTi. Our work suggests that Fenton's oxidation is a promising low-temperature, low-cost surface modification method for improving the surface properties of biomedical NiTi SMA.

Fabrication and characteristics of bioactive sodium titanate/titania graded film on NiTi shape memory alloy

A bioactive sodium titanate/titania graded film was formed in situ on NiTi shape memory alloy (SMA) by oxidizing in H(2)O(2) solution and subsequent NaOH treatment and characterized by scanning electron microscopy, Raman spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy (XPS). The bioactivity of the film was investigated using a simulated body fluid (SBF) soaking test. A titania (TiO(2)) layer was first found on NiTi substrate after oxidized in H(2)O(2) solution, and then a porous sodium titanate (Na(2)TiO(3))/titania film with many Ti--OH groups and a trace of Ni(2)O(3) was formed by the reaction of partial TiO(2) phase with NaOH solution. After immersion in SBF for 12 h, apatite was observed to nucleate and grow on the film. With longer soaking time, more apatite appeared on its surface but our control experiments didn't reveal any apatite formation on the chemically polished NiTi SMA, which indicates the bioactivity of NiTi implants could be improved by the formation of the bioactive film. Moreover, XPS depth profiles of O, Ni, Ti, and Na show the bioactive film possesses a smooth graded interface structure to NiTi substrate, which is in favor of sufficient mechanical stability of apatite layer by subsequent deposition in SBF.

[Investigation on the stimulation effect of polypyrrole film on rat hepatic cells]

Poypyrrole(PPy) films were prepared at 1 x 10(-3) mA/cm2 electropolymerization current density on indium-tin oxide(ITO)substrate. The PPy films were well-distributed, translucent, stable and insoluble. Moreover, they can be sterilized by steam disinfection. Rat hepatic cells were cultured on these films. The results show that PPy films have good biocompatibility and they can accelerate cell growth under electrical stimulation. The cells on PPy films reach the largest cell density earlier than the cells on tissue culture polystyrene(TCPS). Furthermore, rat hepatic cells can generate on PPy films. The cells on PPy films grow faster and enter logarithmic growth phase earlier than those on TCPS.