Advances in plastid transformation for metabolic engineering in higher plants

The plastid (chloroplast) genome of higher plants is an appealing target for metabolic engineering via genetic transformation. Although the bacterial-type plastid genome is small compared with the nuclear genome, it can accommodate large quantities of foreign genes that precisely integrate through homologous recombination. Engineering complex metabolic pathways in plants often requires simultaneous and concerted expression of multiple transgenes, the possibility of stacking several transgenes in synthetic operons makes the transplastomic approach amazing. The potential for extraordinarily high-level transgene expression, absence of epigenetic gene silencing and transgene containment due to the exclusion of plastids from pollen transmission in most angiosperm species further add to the attractiveness of plastid transformation technology. This minireview describes recent advances in expanding the toolboxes for plastid genome engineering, and highlights selected high-value metabolites produced using transplastomic plants, including artemisinin, astaxanthin and paclitaxel.

Modification of Chloroplast Antioxidant Capacity by Plastid Transformation

As immobile organisms, green plants must be frequently challenged by a broad range of environmental stresses. During these constantly adverse conditions, reactive oxygen species (ROS) levels can rise extremely in plants, leading to cellular dysfunction and cell death presumably due to irreversible protein overoxidation. Once considered merely as deleterious molecules, cells seek to remove them as efficiently as possible. To enhance ROS scavenging capacity, genes encoding antioxidative enzymes can be directly expressed from the genome of plastid (chloroplast), a major compartment for ROS production in photosynthetic organisms. Thus, overexpression of antioxidant enzymes by plastid engineering may provide an alternative to enhance plant's tolerance to stressful conditions specifically related with chloroplast-derived ROS. Here, we describe basic procedures for expressing glutathione reductase, a vital component of ascorbate-glutathione pathway, in tobacco via plastid transformation technology.

Evaluation of biotransformation capacity of transplastomic plants and hairy roots of Nicotiana tabacum expressing human cytochrome P450 2D6

Cytochrome P450 monooxygenases (CYPs) are important tools for regio- and stereoselective oxidation of target molecules or engineering of metabolic pathways. Functional heterologous expression of eukaryotic CYPs is often problematic due to their dependency on the specific redox partner and the necessity of correct association with the membranes for displaying enzymatic activity. Plant hosts offer advantages of accessibility of reducing partners and a choice of membranes to insert heterologous CYPs. For the evaluation of plant systems for efficient CYP expression, we established transplastomic plants and hairy root cultures of Nicotiana tabacum carrying the gene encoding human CYP2D6 with broad substrate specificity. The levels of CYP2D6 transcript accumulation and enzymatic activity were estimated and compared with the data of CYP2D6 transient expression in N. benthamiana. The relative level of CYP2D6 transcripts in transplastomic plants was 2-3 orders of magnitude higher of that observed after constitutive or transient expression from the nucleus. CYP2D6 expressed in chloroplasts converted exogenous synthetic substrate loratadine without the need for co-expression of the cognate CYP reductase. The loratadine conversion rate in transplastomic plants was comparable to that in N. benthamiana plants transiently expressing a chloroplast targeted CYP2D6 from the nucleus, but was lower than the value reported for transiently expressed CYP2D6 with the native endoplasmic reticulum signal-anchor sequence. Hairy roots showed the lowest substrate conversion rate, but demonstrated the ability to release the product into the culture medium. The obtained results illustrate the potential of plant-based expression systems for exploiting the enzymatic activities of eukaryotic CYPs with broad substrate specificities.

Transplastomic approaches for metabolic engineering

The plastid (chloroplast) genome of seed plants represents an attractive target of metabolic pathway engineering by genetic transformation. Although the plastid genome is relatively small, it can accommodate large amounts of foreign DNA that precisely integrates via homologous recombination, and is largely excluded from pollen transmission due to the maternal mode of plastid inheritance. Since the engineering of metabolic pathways often requires the expression of multiple transgenes, the possibility to conveniently stack transgenes in synthetic operons makes the transplastomic technology particularly appealing in the area of metabolic engineering. Absence of epigenetic gene silencing mechanisms from plastids and the possibility to achieve high transgene expression levels further add to the attractiveness of plastid genome transformation. This review focuses on engineering principles and available tools for the transplastomic expression of enzymes and pathways, and highlights selected recent applications in metabolic engineering.

Transplastomic Tomato Plants Expressing Insect-Specific Double-Stranded RNAs: A Protocol Based on Biolistic Transformation

Expressing insecticidal double-stranded RNA (dsRNA) molecules in plant plastids is a novel approach for in planta production of dsRNA that has enormous potential for developing improved plant-mediated RNA interference (RNAi) strategies for insect pest control. In this chapter, we describe the design of a transformation vector containing an expression cassette which can be used to stably transform plastids of tomato plants for production and accumulation of dsRNA . Such dsRNA can trigger the mechanisms of RNAi in pest insects and selectively suppress the expression of target genes, resulting in lethality. We also describe a protocol for detection of full-length dsRNA molecules in plastids using an RT-PCR-based method.

Plastid Transformation in Potato: An Important Source of Nutrition and Industrial Materials

For a long time, plastid transformation has been a routine technology only in tobacco due to lack of effective selection and regeneration protocols, and, for some species, due to inefficient recombination using heterologous flanking regions in transformation vectors. Nevertheless, the availability of this technology to economically important crops offers new possibilities in plant breeding to manage pathogen resistance or improve nutritional value. Herein we describe an efficient plastid transformation protocol for potato (Solanum tuberosum subsp. tuberosum), achieved by the optimization of the tissue culture procedures and using transformation vectors carrying homologous potato flanking sequences. This protocol allowed to obtain up to one shoot per shot, an efficiency comparable to that usually accomplished in tobacco. Further, the method described in this chapter has been successfully used to regenerate potato transplastomic plants expressing recombinant GFP protein in chloroplasts and amyloplasts or long double-stranded RNAs for insect pest control.

Stable Plastid Transformation of Petunia for Studies in Basic Research

Petunia hybrida is a commercial ornamental plant and is also an important model species for genetic analysis and transgenic research. Here we describe the steps required to isolate stable plastid transformants in P. hybrida using the commercial Pink Wave cultivar. Wave cultivars are popular spreading Petunias sold as ground cover and potted plants. Transgenes introduced into P. hybrida plastids exhibit stable expression over many generations. The development of plastid transformation in P. hybrida provides an enabling technology to bring the benefits of plastid engineering, including maternal inheritance and stable expression of performance-enhancing trait genes, to the important floriculture and horticulture industries.

Plastid Transformation in Tomato: A Vegetable Crop and Model Species

Tomato (Solanum lycopersicum L.), a member of the nightshade family (Solanaceae), is one of the most important vegetable crops and has long been an important model species in plant biology. Plastid biology in tomato is especially interesting due to the chloroplast-to-chromoplast conversion occurring during fruit ripening. Moreover, as tomato represents a major food crop with a fleshy fruit that can be eaten raw, the development of a plastid transformation protocol for tomato was of particular interest to plant biotechnologists. Recent methodological improvements have made tomato plastid transformation more efficient, and facilitated applications in metabolic engineering and molecular farming. This chapter describes the basic methods involved in the generation and analysis of tomato plants with transgenic chloroplast genomes and summarizes recent applications of tomato plastid transformation in plant biotechnology.

Nicotiana tabacum: An Update on PEG-Mediated Plastid Transformation

Stable plastid transformation in Nicotiana tabacum has been achieved by using two different methods, the biolistic method, using a particle gun, and the polyethylene glycol (PEG)-mediated transformation. PEG-mediated plastid transformation involves the treatment of isolated protoplasts (plant cells without cell wall) with PEG in the presence of DNA. We have previously shown that in Nicotiana tabacum both methods are equally efficient. The PEG-mediated transformation efficiencies range between 20 and 50 plastid transformants per experiment (106 viable treated protoplasts). One advantage of the PEG method is that no expensive equipment such as a particle gun is required. The only crucial points are the handling and the cultivation of protoplasts. Furthermore, markers for the selection of transformed plastids are required. One of the most often used selection markers is the aadA gene which encodes for spectinomycin and streptomycin resistance. Here we describe a simplified and inexpensive protocol for the transformation of plastids in Nicotiana tabacum using an optimized protoplast culture protocol. PEG-mediated plastid transformation has the potential to be developed into a high-throughput, automated pipeline.

Plastid Transformation in Poplar: A Model for Perennial Trees

Poplar (Populus) is an important forest tree and considered model for perennial trees. Here we describe a method for poplar plastid transformation, which involves preparation of explants, vector construction, biolistic bombardment, regeneration and selection of transplastomic poplar plants. The young leaves of 4-week-old poplar plants are used for biolistic bombardment and aadA gene as selectable marker. Homoplasmic transplastomic lines are obtained after regeneration and several rounds of selection with spectinomycin over 10 months. Homoplasmy is further confirmed by Southern blot. The establishment of a plastid transformation system for Populus is likely to make a significant contribution to tree genetic improvement.

Engineering Chloroplasts for High-Level Constitutive or Inducible Transgene Expression

Expression of transgenes from the plastid genome offers a number of attractions to biotechnologists, with the potential to attain very high protein accumulation levels arguably being the most attractive one. High-level transgene expression is of particular importance in resistance engineering (e.g., for expression of insecticidal proteins) and molecular farming (e.g., for expression of pharmaceutical proteins and industrial enzymes). Over the past decades, the production of many commercially valuable proteins in chloroplast-transgenic (transplastomic) plants has been attempted, including pharmaceutical proteins (e.g., subunit vaccines and protein antibiotics) and industrial enzymes. Although in some cases, spectacularly high foreign protein accumulation levels have been obtained, expression levels were disappointingly poor in other cases. In this review, I summarize our current knowledge about the factors influencing the efficiency of plastid transgene expression, and highlight possible optimization strategies to alleviate problems with poor expression levels. I also discuss available techniques for inducible expression of chloroplast transgenes.

Plastid Marker Gene Excision in the Tobacco Shoot Apex by Agrobacterium-Delivered Cre Recombinase

Here we describe a protocol for the excision of plastid marker genes directly in tobacco (Nicotiana tabacum) plants by the Cre recombinase. The example of the marker gene is the barau gene flanked by loxP sites in the plastid genome. For marker excision Agrobacterium encoding the recombinase on its T-DNA is injected at an axillary bud site of a decapitated plant, forcing shoot regeneration at the injection site. The excised plastid marker, the barau gene, confers a visual aurea leaf phenotype, thus marker excision via the flanking recombinase target sites is recognized by the restoration of normal green color of the leaves. The success of in planta plastid marker excision proves that manipulation of the plastid genomes is feasible within an intact plant. Extension of the protocol to in planta plastid transformation depends on the development of new protocols for the delivery of transforming DNA and the availability of visual marker genes.

An AMA1/MSP119 Adjuvanted Malaria Transplastomic Plant-Based Vaccine Induces Immune Responses in Test Animals

Malaria is a tropical human disease, caused by protozoan parasites, wherein a significant number of the world's population is at risk. Annually, more than 219 million new cases are reported. Although there are prevention treatments, there are no highly and widely effective licensed anti-malarial vaccines available for use. Opportunities for utilization of plant-based vaccines as novel platforms for developing safe, reliable, and affordable treatments offer promise for developing such a vaccine against malaria. In this study, a Malchloroplast candidate vaccine was designed, composed of segments of AMA1 and MSP1 proteins, two epitopes of Plasmodium falciparum, along with a GK1 peptide from Taenia solium as adjuvant, and this was expressed in tobacco chloroplasts. Transplastomic tobacco lines were generated using biolistic transformation, and these were confirmed to carry the synthetic gene construct. Expression of the synthetic GK1 peptide was confirmed using RT-PCR and Western blots. Furthermore, the GK1 peptide was detected by HPLC at levels of up to 6 µg g-1 dry weight of tobacco leaf tissue. The plant-derived Malchloroplast candidate vaccine was subsequently tested in BALB/c female mice following subcutaneous administration, and was found to elicit specific humoral responses. Furthermore, components of this candidate vaccine were recognized by antibodies in Plasmodium falciparum malaria patients and were immunogenic in test mice. Thus, this study provided a 'proof of concept' for a promising plant-based candidate subunit vaccine against malaria.

Accumulation of glycine betaine in transplastomic potato plants expressing choline oxidase confers improved drought tolerance

Plastid genome engineering is an effective method to generate drought-resistant potato plants accumulating glycine betaine in plastids. Glycine betaine (GB) plays an important role under abiotic stress, and its accumulation in chloroplasts is more effective on stress tolerance than that in cytosol of transgenic plants. Here, we report that the codA gene from Arthrobacter globiformis, which encoded choline oxidase to catalyze the conversion of choline to GB, was successfully introduced into potato (Solanum tuberosum) plastid genome by plastid genetic engineering. Two independent plastid-transformed lines were isolated and confirmed as homoplasmic via Southern-blot analysis, in which the mRNA level of codA was much higher in leaves than in tubers. GB accumulated in similar levels in both leaves and tubers of codA-transplastomic potato plants (referred to as PC plants). The GB content was moderately increased in PC plants, and compartmentation of GB in plastids conferred considerably higher tolerance to drought stress compared to wild-type (WT) plants. Higher levels of relative water content and chlorophyll content under drought stress were detected in the leaves of PC plants compared to WT plants. Moreover, PC plants presented a significantly higher photosynthetic performance as well as antioxidant enzyme activities during drought stress. These results suggested that biosynthesis of GB by chloroplast engineering was an effective method to increase drought tolerance.

High-level production of single chain monellin mutants with enhanced sweetness and stability in tobacco chloroplasts

MAIN CONCLUSION

Plastid-based MNEI protein mutants retain the structure, stability and sweetness of their bacterial counterparts, confirming the attractiveness of the plastid transformation technology for high-yield production of recombinant proteins. The prevalence of obesity and diabetes has dramatically increased the industrial demand for the development and use of alternatives to sugar and traditional sweeteners. Sweet proteins, such as MNEI, a single chain derivative of monellin, are the most promising candidates for industrial applications. In this work, we describe the use of tobacco chloroplasts as a stable plant expression platform to produce three MNEI protein mutants with improved taste profile and stability. All plant-based proteins were correctly expressed in tobacco chloroplasts, purified and subjected to in-depth chemical and sensory analyses. Recombinant MNEI mutants showed a protein yield ranging from 5% to more than 50% of total soluble proteins, which, to date, represents the highest accumulation level of MNEI mutants in plants. Comparative analyses demonstrated the high similarity, in terms of structure, stability and function, of the proteins produced in plant chloroplasts and bacteria. The high yield and the extreme sweetness perceived for the plant-derived proteins prove that plastid transformation technology is a safe, stable and cost-effective production platform for low-calorie sweeteners, with an estimated production of up to 25-30 mg of pure protein/plant.

High-level expression of the HIV entry inhibitor griffithsin from the plastid genome and retention of biological activity in dried tobacco leaves

KEY MESSAGE

The potent anti-HIV microbicide griffithsin was expressed to high levels in tobacco chloroplasts, enabling efficient purification from both fresh and dried biomass, thus providing storable material for inexpensive production and scale-up on demand. The global HIV epidemic continues to grow, with 1.8 million new infections occurring per year. In the absence of a cure and an AIDS vaccine, there is a pressing need to prevent new infections in order to curb the disease. Topical microbicides that block viral entry into human cells can potentially prevent HIV infection. The antiviral lectin griffithsin has been identified as a highly potent inhibitor of HIV entry into human cells. Here we have explored the possibility to use transplastomic plants as an inexpensive production platform for griffithsin. We show that griffithsin accumulates in stably transformed tobacco chloroplasts to up to 5% of the total soluble protein of the plant. Griffithsin can be easily purified from leaf material and shows similarly high virus neutralization activity as griffithsin protein recombinantly expressed in bacteria. We also show that dried tobacco provides a storable source material for griffithsin purification, thus enabling quick scale-up of production on demand.

Rescue of Deletion Mutants to Isolate Plastid Transformants in Higher Plants

Plastid transformation is an attractive alternative to nuclear transformation enabling manipulation of native plastid genes and the insertion of foreign genes into plastids for applications in agriculture and industrial biotechnology. Transformation is achieved using dominant positive selection markers that confer resistance to antibiotics. The very high copy number of plastid DNA means that a prolonged selection step is required to obtain a uniform population of transgenic plastid genomes. Repair of mutant plastid genes with the corresponding functional allele allows selection based on restoration of the wild type phenotype. The use of deletion rather than point mutants avoids spontaneous reversion back to wild type. Combining antibiotic resistance markers with native plastid genes speeds up the attainment of homoplasmy and allows early transfer of transplastomic lines to soil where antibiotic selection is replaced by selection for photoautotrophic growth. Here we describe our method using the wild type rbcL gene as a plastid transformation marker to restore pigmentation and photosynthesis to a pale green heterotrophic rbcL mutant.

Phytodetoxification of TNT by transplastomic tobacco (Nicotiana tabacum) expressing a bacterial nitroreductase

KEY MESSAGE

Expression of the bacterial nitroreductase gene, nfsI, in tobacco plastids conferred the ability to detoxify TNT. The toxic pollutant 2,4,6-trinitrotoluene (TNT) is recalcitrant to degradation in the environment. Phytoremediation is a potentially low cost remediation technique that could be applied to soil contaminated with TNT; however, progress is hindered by the phytotoxicity of this compound. Previous studies have demonstrated that plants transformed with the bacterial nitroreductase gene, nfsI have increased ability to tolerate and detoxify TNT. It has been proposed that plants engineered to express nfsI could be used to remediate TNT on military ranges, but this could require steps to mitigate transgene flow to wild populations. To address this, we have developed nfsI transplastomic tobacco (Nicotiana tabacum L.) to reduce pollen-borne transgene flow. Here we have shown that when grown on solid or liquid media, the transplastomic tobacco expressing nfsI were significantly more tolerant to TNT, produced increased biomass and removed more TNT from the media than untransformed plants. Additionally, transplastomic plants expressing nfsI regenerated with high efficiency when grown on medium containing TNT, suggesting that nfsI and TNT could together be used to provide a selectable screen for plastid transformation.

Construction of Plastid Expression Vector and Development of Genetic Transformation System for the Seaweed Pyropia yezoensis

Pyropia yezoensis, belonging to the Rhodophyta, is an economically important seaweed. In this study, we developed a high-efficiency plastid transformation platform for P. yezoensis. In the plastid transformation vector, psbA UTR of P. yezoensis, including the promoter and 3' UTR, was used to express foreign genes. The integration site was a transcriptionally active intergenic region between the rrsB and trnI genes, located in the inverted repeat regions of the plastid genome. The CAT and eGFP genes were integrated into the plastid genome at this site. The expression of CAT in the transformants confers resistance to chloramphenicol through the action of chloramphenicol acetyltransferase, which inactivates the drug, thereby allowing the plant to grow well under selective pressure. The eGFP fluorescence signal was also observed in transformed cells and the transformants. The average survival rate of treated cells was estimated to be approximately 4.2‰ (4 transplastomic colonies per 1000 gametophyte cells). Multiple-PCR analyses confirmed that the CAT and eGFP genes were successfully integrated in the site between rrsB and trnI. Western blot also showed eGFP expression in the cells of transformants. Thus, this study presents the first convenient plastid gene expression system for P. yezoensis and provides an important platform for studying gene function in P. yezoensis.

A bifunctional aminoglycoside acetyltransferase/phosphotransferase conferring tobramycin resistance provides an efficient selectable marker for plastid transformation

KEY MESSAGE

A new selectable marker gene for stable transformation of the plastid genome was developed that is similarly efficient as the aadA, and produces no background of spontaneous resistance mutants. More than 25 years after its development for Chlamydomonas and tobacco, the transformation of the chloroplast genome still represents a challenging technology that is available only in a handful of species. The vast majority of chloroplast transformation experiments conducted thus far have relied on a single selectable marker gene, the spectinomycin resistance gene aadA. Although a few alternative markers have been reported, the aadA has remained unrivalled in efficiency and is, therefore, nearly exclusively used. The development of new marker genes for plastid transformation is of crucial importance to all efforts towards extending the species range of the technology as well as to those applications in basic research, biotechnology and synthetic biology that involve the multistep engineering of plastid genomes. Here, we have tested a bifunctional resistance gene for its suitability as a selectable marker for chloroplast transformation. The bacterial enzyme aminoglycoside acetyltransferase(6')-Ie/aminoglycoside phosphotransferase(2″)-Ia possesses an N-terminal acetyltransferase domain and a C-terminal phosphotransferase domain that can act synergistically and detoxify aminoglycoside antibiotics highly efficiently. We report that, in combination with selection for resistance to the aminoglycoside tobramycin, the aac(6')-Ie/aph(2″)-Ia gene represents an efficient marker for plastid transformation in that it produces similar numbers of transplastomic lines as the spectinomycin resistance gene aadA. Importantly, no spontaneous antibiotic resistance mutants appear under tobramycin selection.

Stable plastid transformation in Scoparia dulcis L

In the present investigation we report stable plastid transformation in Scoparia dulcis L., a versatile medicinal herb via particle gun method. The vector KNTc, harbouring aadA as a selectable marker and egfp as a reporter gene which were under the control of synthetic promoter pNG1014a, targets inverted repeats, trnR/trnN of the plastid genome. By use of this heterologous vector, recovery of transplastomic lines with suitable selection protocol have been successfully established with overall efficiency of two transgenic lines for 25 bombarded leaf explants. PCR and Southern blot analysis demonstrated stable integration of foreign gene into the target sequences. The results represent a significant advancement of the plastid transformation technology in medicinal plants, which relevantly implements a change over in enhancing and regulating of certain metabolic pathways.

Chloroplast-Based Expression of Recombinant Proteins by Gateway® Cloning Technology

Plastid transformation for the expression of recombinant proteins and entire enzymatic pathways has become a promising tool for plant biotechnology in the past decade. Several improvements of the technology have turned plant plastids into robust and dependable expression platforms for multiple high value compounds. In this chapter, we describe our current methodology based on Gateway(®) recombinant cloning, which we have adapted for plastid transformation. We describe the steps required for cloning, biolistic transformation, identification, and regeneration of transplastomic plant lines and Western blot analysis.

High-level expression of thermostable cellulolytic enzymes in tobacco transplastomic plants and their use in hydrolysis of an industrially pretreated Arundo donax L. biomass

BACKGROUND

Biofuels production from plant biomasses is a complex multi-step process with important economic burdens. Several biotechnological approaches have been pursued to reduce biofuels production costs. The aim of the present study was to explore the production in tobacco plastome of three genes encoding (hemi)cellulolytic enzymes from thermophilic and hyperthermophilic bacterium and Archaea, respectively, and test their application in the bioconversion of an important industrially pretreated biomass feedstock (A. donax) for production of second-generation biofuels.

RESULTS

The selected enzymes, endoglucanase, endo-β-1,4-xylanase and β-glucosidase, were expressed in tobacco plastome with a protein yield range from 2 % to more than 75 % of total soluble proteins (TSP). The accumulation of endoglucanase (up to 2 % TSP) gave altered plant phenotypes whose severity was directly linked to the enzyme yield. The most severe seedling-lethal phenotype was due to the impairment of plastid development associated to the binding of endoglucanase protein to thylakoids. Endo-β-1,4-xylanase and β-glucosidase, produced at very high level without detrimental effects on plant development, were enriched (fourfold) by heat treatment (105.4 and 255.4 U/mg, respectively). Both plastid-derived biocatalysts retained the main features of the native or recombinantly expressed enzymes with interesting differences. Plastid-derived xylanase and β-glucosidase resulted more thermophilic than the E. coli recombinant and native counterpart, respectively. Bioconversion experiments, carried out at 50 and 60 °C, demonstrated that plastid-derived enzymes were able to hydrolyse an industrially pretreated giant reed biomass. In particular, the replacement of commercial enzyme with plastid-derived xylanase, at 60 °C, produced an increase of both xylose recovery and hydrolysis rate; whereas the replacement of both xylanase and β-glucosidase produced glucose levels similar to those observed with the commercial cocktails, and xylose yields always higher in the whole 24-72 h range.

CONCLUSIONS

The very high production level of thermophilic and hyperthermophilic enzymes, their stability and bioconversion efficiencies described in this study demonstrate that plastid transformation represents a real cost-effective production platform for cellulolytic enzymes.