What potential do mosses have as biomonitors of POPs? A comparative study of hexachlorocyclohexane sorption

Persistent organic pollutants (POPs) pose a significant global threat to human health and the environment, and require continuous monitoring due to their ability to migrate long distances. Active biomonitoring using cloned mosses is an inexpensive but underexplored method to assess POPs, mainly due to the poor understanding of the loading mechanisms of these pollutants in mosses. In this work, Fontinalis antipyretica (aquatic moss) and Sphagnum palustre (terrestrial moss) were evaluated as potential biomonitors of hexachlorocyclohexanes (HCHs: α-, β-, γ-, δ-HCH), crucial POPs. Moss clones, grown in photobioreactors and subsequently oven-dried, were used. Their lipid composition and distribution were characterized through molecular and histochemical studies. Adsorption experiments were carried out in the aqueous phase using the repeated additions method and in the gas phase using an active air sampling technique based on solid-phase extraction, a pioneering approach in moss research. F. antipyretica exhibited greater lipid content in the walls of most cells and higher adsorption capacity for all HCH isomers in both gaseous and liquid environments. These findings highlight the need for further investigation of POP loading mechanisms in mosses and open the door to explore other species based on their lipid content.

Perspectives on the use of biochar in the valorization of mining wastes from sulfide minerals flotation: Recovery of metals and effects on toxicity

This study aims to evaluate the use of two biochars obtained by pyrolysis of sugarcane-bagasse and compare it with commercial activated carbons as catalysts for the recovery of metals from one mining waste from sulfide minerals flotation (MW). It is also intended to determine the influence of carbon materials on the toxicity of the final residues. Leaching tests were performed in 250 mL erlenmeyer flasks using plates with magnetic stirrers during 24 h, at 90 °C and a stirring speed of 350 rpm. For each test, 5 g of MW were mixed with carbon material in two ratios of MW/carbon material (1/0.1 and 1/0.2 wt/wt) and 100 mL of leaching agent (H2SO4 solution at pH = 0.8-0.9 and 5 gL-1 of Fe3+). The experimental results showed that the addition of biochar and activated carbon enhances the recovery of Cu and Zn. The use of commercial activated carbons in ratios of 1/0.1 and 1/0.2 MW/carbon material leads to the extraction of more than 91 % of Cu and 97 % of Zn, after 24 h of leaching. For biochars, the highest recovery values of Cu (82.9 %) and Zn (98.1 %) were achieved with biochar prepared at 750 °C and used in the ratio of 1/0.2. However, the addition of carbon materials does not improve the recovery of Co. The presence of carbon materials decreased the electrical conductivity and pH of the final residue. The leaching of samples MW + W35 (1/0.1) and MW + BC550 (1/0.1) leads to a germination index higher than 90 %. For two biochars, all samples showed non-phytotoxicity.

A novel time-saving multiplex PCR assay for detecting and discriminating the most common canine Babesia species in Europe

In Europe, most cases of canine babesiosis are caused by Babesia canis, Babesia vogeli (large piroplasms) and Babesia vulpes (small piroplasm). Molecular diagnosis is recommended due to its high sensitivity. Species identification after sequencing allows applying a rapid and efficient treatment, leading to a better prognosis; however, it is expensive and time-consuming. Thus, the objective of the present study was to develop a time-saving multiplex polymerase chain reaction (PCR) for simultaneously detecting and discriminating between large and small forms without sequence analysis. A new multiplex PCR was designed and tested using blood samples from 79 dogs showing clinical signs compatible with babesiosis which were previously analysed using blood smears and molecular methods. Multiplex PCR successfully discriminated between both Babesia groups showing bands of 700 and 890 bp for B. canis/B. vogeli and B. vulpes, respectively. No significant differences in the results of both PCR were detected and a substantial agreement between protocols (κ = 0.64) was found. Our multiplex PCR represents a reliable tool for detecting infections by the major Babesia spp. in dogs from Europe. Since no sequence analysis is required for identifying the species involved, this PCR allows the rapid administration of an appropriate treatment, thus improving the survival rate of the infected animals. In addition, it will represent a helpful tool for unravelling the real prevalence and distribution of B. vulpes and its implication in clinical cases.

Exploring quantitative cellular bioimaging and assessment of CdSe/ZnS quantum dots cellular uptake in single cells, using ns-LA-ICP-SFMS

Quantitative bioimaging of Quantum Dots (QDs) uptake in single cells by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) is a challenging task due to the high sensitivity and high spatial resolution required, and to the lack of matrix-matched reference materials. In this work, high spatially resolved quantitative bioimaging of CdSe/ZnS QDs uptake in single HT22 mouse hippocampal neuronal cells and in single HeLa human cervical carcinoma cells is novelty investigated combining: (a) the use of a ns-LA-ICP-Sector Field (SF)MS unit with mono-elemental fast and sensitive single pulse response for ¹¹⁴Cd⁺; and (b) the spatially resolved analysis of dried pL-droplets from a solution with a known concentration of these QDs to obtain a response factor that allows quantification of elemental bioimages. Single cells and dried pL-droplets are morphologically characterized by Atomic Force Microscopy (AFM) to determine their volume and thickness distribution. Moreover, operating conditions (e.g. spot size, energy per laser pulse, etc.) are optimized to completely ablate the cells and pL droplets at high spatial resolution. Constant operating conditions for the analysis of the single cells and calibrating samples is employed to reduce potential fractionation effects related to mass load effects in the ICP. A number concentration of CdSe/ZnS QDs between 3.5 10⁴ and 48 10⁴ is estimated to be uptaken by several selected single HT22 and HeLa cells, after being incubated in the presence of a QDs suspension added to a standard cell culture medium. Mono-elemental bioimaging at subcellular resolution seems to show a higher number concentration of the CdSe/ZnS QDs in the cytosol around the cell nucleus.

Genetic counseling in prostate cancer: How to implement it in daily clinical practice?

Prostate cancer plays an undeniably prominent role in public health in our days and health systems. Its epidemiological impact is quantitatively very close to that of other tumors such as colon cancer and breast cancer, in which genetic counseling is part of their routine clinical practice, both in the initial evaluation and in the selection of therapeutic strategies. Hereditary cancer syndromes, breast/ovarian and Lynch syndrome are part of genetic counseling in these tumors. Currently, we also know that they can be associated to prostate cancer. The time has come to implement genetic counseling in prostate cancer from the earliest stages of its approach, from initial suspicion to the most advanced tumors. We present an updated review carried out by our interdisciplinary working group on scientific literature, clinical practice guidelines and consensus documents, aimed at the creation and drafting of a'Protocol for genetic counseling in prostate cancer' for the study of germline, with easy application in different healthcare settings. This protocol is currently being implemented in our routine practice and provides answers to 3 specific questions: Who should receive genetic counseling for prostate cancer? Which gene panel should be analyzed? How should counseling be done according to the results obtained? Other aspects about who should perform genetic counseling, ethical considerations and regulations are also collected.

Remediation of mining soils by combining Brassica napus growth and amendment with chars from manure waste

Mining activities lead to important physical, chemical and biological effects on soil properties, generating severe impacts in the establishment and maintenance of vegetation. Assisted phytoremediation can be considered an environmentally friendly approach for soil remediation. In this study, two mining soils (PORT and GAM) were treated with 10%, by mass, of the following amendments: manure biochars prepared at 450 °C (BMW450) and 600 °C (BMW600), hydrochars prepared by hydrothermal carbonization (HTC) of manure at 190 °C (HWM190) and 240 °C (HMW240) and manure waste (MW). Brassica napus was used as a phytoextraction species. After 45 days of plant growth, soil samples were widely characterized, including microbial biomass carbon, enzymatic activity and metal content. In addition, plant biomass production, bioconcentration factor, translocation factor and metal uptake were determined. Experimental results showed that addition of biochars improved the As uptake by Brassica napus in both soils but just in the roots increasing bioconcentration factor between 22.1 and 39.5% for GAM soil and between 28.6 and 53.4% for PORT soil. Brassica napus cannot be considered as Zn accumulator in GAM soil samples and in the case of PORT samples, only the addition of BMW600 and HMW240 enhanced the phytoextraction process of Zn on the roots. Soil enzyme activity improved in hydrochar amended soils.

The effect of post-pyrolysis treatment on waste biomass derived hydrochar

Hydrochars are materials with a promising future, as their high carbon content and porosity renders them suitable for uses including peat substitutes, soil remediation and carbon adsorbent precursors. Combining hydrothermal carbonization and pyrolysis offers the prospect to provide advanced materials with a higher porosity and carbon content. This approach would mitigate drawbacks associated to hydrochars, including phytotoxicity. This research studied the influence of pyrolysis temperature and heating time on the resulting properties of chars made from hydrothermal carbonization of biomass wastes at 200 °C for 4 h and compared them to biochars that had not received any prior hydrothermal carbonization. Interestingly, hydrochar followed by pyrolysis was able to result in phytostimulation, while, when only pyrolysis was carried out, phytotoxicity was eliminated, but no phytostimulant effect was observed. In addition, the results indicated that the higher and longer the pyrolysis temperature (from 350 to 550 °C) and duration time (from 1 to 5 h), respectively, the more microporosity was generated, while phytotoxicity was reduced. In addition, aromaticity and thermal stability significantly increased with pyrolysis treatment. Consequently, hydrochars improve their properties and offer more potential for environmental applications after a pyrolysis post-treatment.

Influence of pyrolysis parameters on phosphorus fractions of biosolids derived biochar

Transforming biosolids into biochar, through pyrolysis, could result in more sustainable waste management. Influence of pyrolysis conditions (temperature, heating rate and residence time) on physico-chemical properties of biosolids (collected at Mount Martha Water Recycling Plant, Melbourne), phosphorus fractions and phosphorus forms was investigated. Twelve different biochar samples were produced at 400, 500 and 600 °C, at two heating rates (5 and 20 °C/min) and at two residence times (30 and 120 min). Biochar yield, pH, electrical conductivity (EC), elements (C, H and N) and BET surface area were analysed. Sequential extraction of P in biosolids and resultant biochars was done using Hedley method. Characterization was completed with SEM images and results from ³¹P liquid state NMR. Increased temperatures would not only increase the alkalinity, decrease EC and increase the adsorption capacity by increasing the surface area but also convert the readily available P to a less available pool. Therefore, this nutrient might be released to soil slowly over a longer period of time. The results showed that temperature, along with residence time and heating rate, had a significant effect on the characteristics observed. Therefore, all these factors need to be carefully considered when preparing biochar for use as a soil amendment.

Combining phytoextraction by Brassica napus and biochar amendment for the remediation of a mining soil in Riotinto (Spain)

Soil contamination in mining areas is an important environmental concern. In these areas, phytoremediation is often impeded because of the low fertility and pH. Assisted phytoremediation is increasingly being used in polluted areas. Biochar could assist plant growth via enhanced soil fertility. An experiment was performed in a mining soil (RIII) from the mining area of Riotinto (Spain) contaminated with Cu, Pb, Zn and As in order to study: (i) The effects of biochar on soil fertility; (ii) Biochar temperature of preparation effect and (iii) Effect of biochar on phytoremediation potential. A mesocosm experiment was designed using Brassica napus as test specie. Soil (RIII) was treated with rabbit manure biochars prepared at 450 °C (BM450) and 600 °C (BM600) at a rate of 10% in mass and incubated for 60 days with or without Brassica napus. Results showed that the combination of BM450 or BM600 with Brassica napus growth decreased the amount of As, Cu, Co, Cr, Se and Pb in the soil. Values of bioaccumulation factor (BAF) for Cd were particularly elevated (>10) in the unamended soil and reached values higher than 1 for other elements, indicating the potential of Brassica napus to accumulate several heavy metals. Translocation Factor (TF) was reduced for Co, Cr, Cd, Cu, Ni, Zn, Pb and As after biochar addition indicating root accumulation of these metals. In all cases, biochar addition increased biomass production. Finally, the addition of BM450 increased GMea index indicating also an improvement on soil quality.

Hydrochars from industrial macroalgae "Gelidium Sesquipedale" biomass wastes

Macroalgae wastes from the Agar-Agar industry were used as a feedstock to obtain hydrochars by means of hydrothermal carbonization. The effect of temperature (200 °C and 230 °C) and time (2 h and 6 h) on the yield, higher heating value (HHV) and chemical-morphological-textural properties of the hydrochars was studied. The carbon content and the higher heating value were observed to increase with the hydrothermal carbonization. The hydrochars yields (up to 60%) were much higher than yields obtained using conventional char (27.5-33.5%). The hydrochar obtained at 230 °C and after 6 h showed a HHV of 23.25 MJ/kg, which is similar to that of lignite HHV. The H/C and O/C atomic ratios decreased as a consequence of the dehydration and decarboxilation reactions. Hydrothermal carbonization barely changed the vegetal structure of the macroalgae waste. The hydrochars were found to be essentially meso-macroporous with average pore sizes of up to 110.5 nm.

Synergy between pyroelectric and photovoltaic effects for optoelectronic nanoparticle manipulation

The combined action of the pyroelectric (PY) and photovoltaic (PV) effects, exhibited by z-cut LiNbO₃:Fe substrates, has been investigated for particle trapping and patterning applications. The novel hybrid procedure provides new possibilities and versatility to optoelectronic manipulation on LiNbO₃ substrates. It has allowed obtaining periodic and arbitrary 2D patterns whose particle density distribution is correlated with the light intensity profile but can be tuned through ΔT according to the relative strength of the PV and PY effects. A relevant result is that the PY and PV contributions compete for a ΔT range of 1-20 °C, very accessible for experiments. Moreover, the synergy of the PY and PV has provided two additional remarkable applications: i) A method to measure the PV field, key magnitude for photovoltaic optoelectronic tweezers. Using this method, the minimum field needed to obtain a particle pattern has been determined, resulting relatively high, E~60 kV/cm, and so, requiring highly doped crystals when only using the PV effect. ii) An strategy combining the PY and PV to get particle patterning in samples inactive for PV trapping when the PV field value is under that threshold.

La deformación del borde dorsal del cuello en burros en Andalucía y Extremadura, España

Se plantea como objetivo estudio de la incidencia de la deformación del borde dorsal del cuello en burros en Andalucía y Extremadura, España. Se practicó un examen clínico a cada uno de los burros mediante la inspección detallada y la palpación. Se realizó un estudio morfológico siguiendo el protocolo de adiposidad para la evaluación del borde dorsal del cuello descrito. Se analizo el grado de deformación del cuello, diámetro del cuello, largo del cuello, peso, actividad atlética, localización geográfica y tipo de alimentación, tipo de manejo, instalaciones. Se estudiaron a un total de 853 burros, la deformación del borde dorsal del cuello presento una mayor incidencia en burros de raza Andaluza de 70%, en raza Miniatura 14%, en Zamorano-Leonesa 9% y por último en la raza Catalana 7%. En relación al sexo el 65% fue macho y hembras 35%. El nivel de correlación entre el grado de deformidad y el sistema de manejo fue positivo de 0.18, también para la deformación del cuello y la altura del comedero 0.0835. La deformación del borde dorsal del cuello (Cuello de gato, cresta o cresty neck), presento una incidencia de 40%, con mayor número de observaciones en burros de raza Andaluza de 70%, en raza Miniatura 14%, en Zamorano-Leonesa 9% y por último en la raza Catalana 7%.

Biochars and hydrochars prepared by pyrolysis and hydrothermal carbonisation of pig manure

Pyrolysis of organic wastes for biochar preparation has been proved as a useful way of waste management. However, the elevated water content of some organic wastes precludes its use without a drying step before pyrolysis treatment. For this reason, hydrothermal carbonization (HTC) of wet biomass could be an inexpensive alternative management method. The main objective of the present work is to compare the properties of biochars and hydrochars obtained from thermal treatment of pig manure. Biochars were prepared at 300 °C (BPM300), 450 °C (BPM450) and 600 °C (BPM600) and hydrochars were obtained using a pig manure solution (ratio 30:70) that was heated at 200 °C (HPM200), 220 °C (HPM220) and 240 °C (HPM240) during 2 h. Characterization of biochar and hydrochar samples showed that pyrolysis led to chars with more aromatic structures and high thermal stability while HTC process originated chars with more aliphatic structures. HPM220 and HPM240 showed the highest values of field capacity water content and available water probably due to their higher O/C ratios and the macroporosity development in the range from 200 to 30,000 nm. These results suggested that HTC could be an interesting method to obtain soil growing media or green roof materials with adequate hydrophysical properties.

Choice of pyrolysis parameters for urban wastes affects soil enzymes and plant germination in a Mediterranean soil

The production of organic waste has steadily increased in recent years, with subsequent impact on the environment. The European Union committed to diminish the volume of biodegradable municipal waste disposed of in landfills by 2016-2020. The synthesis of biochar from urban waste and its application to improve soil quality can constitute a novel route for valorization. The aim of this paper was to study the effect of three biochars originated from pyrolysis of the organic fraction of urban waste at two different temperatures (300°C and 500°C) and two residence times (1h and 5h) on the biochemical properties of an agricultural soil. Soil was amended with biochars at a rate of 8% and incubated for 74days. A phytotoxicity assay, using garden cress as the test species, was conducted. CO₂ emissions, microbial biomass C and the enzymes dehydrogenase, phosphomonoesterase and β-glucosidase were measured in tested soils. Biochars prepared at 300°C resulted in lower germination index values, which could partly be ascribed to a higher bioavailability of heavy metals and higher soluble organic matter, while the biochar prepared as 500°C exhibited a phytostimulant effect. Biochars produced at 300°C (B300-1h, B300-5h) augmented soil CO₂ emissions while there was no effect on microbial respiration in the soil amended with the biochar prepared at 500°C. Pyrolysis temperature and, for some enzymes, residence time, controlled soil enzymatic activity.

Use of magnetic biochars for the immobilization of heavy metals in a multi-contaminated soil

Modified biochars, including magnetic biochars, have been tested in water for the removal of inorganic pollutants. However, at present it is unknown if they possess benefits over conventional biochar materials in relation to land remediation. A paddy soil was collected near Liantang village in Lechang Pb-Zn mine area in Guangdong Province (China). The soil was polluted with Cd, Cu, Zn and Pb, with total contents of 1.4mg/kg, 80mg/kg, 1638mg/kg and 2463mg/kg, respectively. We prepared magnetic and conventional biochar from two feedstocks (poultry litter and Eucalyptus) at a temperature of 300 and 500°C. A sequential extraction procedure for the speciation of heavy metals and a phytotoxicity test using rice were performed. Acid-soluble Cd in soils amended with PLB was 8 to 10% lower than in the control polluted soil. This figure was 27 to 29% for acid-soluble Zn and 59 to 63% for acid-soluble Cu. In some cases, differences were found between the heavy metal fractionation in samples amended with magnetic and conventional biochars. Plant biomass was unaffected by most treatments, but increased by 32% in the treatments containing magnetic poultry litter biochar. Our study shows that a careful choice of feedstock is of utmost importance for successful containment of heavy metals in a multi-contaminated mining area soil. An appropriate choice of feedstock (in the case of this study poultry litter vs. eucalyptus) was more determinant with respect to the mobility of pollutants than altering pyrolysis temperature or modifying surface properties through magnetization. However, surface modification through magnetization can have a significant impact on plant yield and offer comparative advantages in the management of some degraded landscapes.

High heterogeneity in soil composition and quality in different mangrove forests of Venezuela

Mangrove forests play an important role in biogeochemical cycles of metals, nutrients, and C in coastal ecosystems. However, these functions could be strongly affected by the mangrove soil degradation. In this study, we performed an intensive sampling characterizing mangrove soils under different types of environment (lagoon/gulf) and vegetation (Rhizophora/Avicennia/dead mangrove) in the Venezuelan coast. To better understand the spatial heterogeneity of the composition and characteristics of the soils, a wide range of the soil attributes were analyzed. In general, the soils were anoxic (Eh < 200 mV), with a neutral pH and low concentration in toxic metals; nevertheless, they varied widely in the soil and its quality-defining parameters (e.g., clay contents, total organic carbon, Fe, Al, toxic trace metals). It is noteworthy that the mangroves presented a low Fe_Pyrite content due to a limitation in the Fe oxyhydroxide contents, especially in soils with higher organic C content (TOC > 15%). Finally, the dead mangrove showed significantly lower amounts of TOC and fibers (in comparison to the well-preserved mangrove forest), which indicates that the C pools in mangrove soils are highly sensitive also to natural impact, such as ENSO.

High fragility of the soil organic C pools in mangrove forests

Mangrove forests play an important role in biogeochemical cycle of C, storing large amounts of organic carbon. However, these functions can be controlled by the high spatial heterogeneity of these intertidal environments. In this study were performed an intensive sampling characterizing mangrove soils under different type of vegetation (Rhizophora/Avicennia/dead mangrove) in the Venezuelan coast. The soils were anoxic, with a pH~7; however other soil parameters varied widely (e.g., clay, organic carbon). Dead mangrove area showed a significant lower amounts of total organic carbon (TOC) (6.8±2.2%), in comparison to the well-preserved mangrove of Avicennia or Rhizophora (TOC=17-20%). Our results indicate that 56% of the TOC was lost within a period of 10years and we estimate that 11,219kgm^-2 of CO₂ was emitted as a result of the mangrove death. These results represent an average emission rate of 11.2±19.17tCO₂ha^-1y^-1.

Fasciola hepatica induces eosinophil apoptosis in the migratory and biliary stages of infection in sheep

The aim of the present work was to evaluate the number of apoptotic eosinophils in the livers of sheep experimentally infected with Fasciola hepatica during the migratory and biliary stages of infection. Four groups (n=5) of sheep were used; groups 1-3 were orally infected with 200 metacercariae (mc) and sacrificed at 8 and 28 days post-infection (dpi), and 17 weeks post-infection (wpi), respectively. Group 4 was used as an uninfected control. Apoptosis was detected using immunohistochemistry with a polyclonal antibody against anti-active caspase-3, and transmission electron microscopy (TEM). Eosinophils were identified using the Hansel stain in serial sections for caspase-3, and by ultrastructural features using TEM. At 8 and 28 dpi, numerous caspase-3(+) eosinophils were mainly found at the periphery of acute hepatic necrotic foci. The percentage of caspase -3(+) apoptotic eosinophils in the periphery of necrotic foci was high (46.1-53.9) at 8 and 28 dpi, respectively, and decreased in granulomas found at 28 dpi (6%). Transmission electron microscopy confirmed the presence of apoptotic eosinophils in hepatic lesions at 8 and 28 dpi. At 17 wpi, apoptotic eosinophils were detected in the infiltrate surrounding some enlarged bile ducts containing adult flukes. This is the first report of apoptosis induced by F. hepatica in sheep and the first study reporting apoptosis in eosinophils in hepatic inflammatory infiltrates in vivo. The high number of apoptotic eosinophils in acute necrotic tracts during the migratory and biliary stages of infection suggests that eosinophil apoptosis may play a role in F. hepatica survival during different stages of infection.

Influence of pyrolysis temperature on composted sewage sludge biochar priming effect in a loamy soil

Biochar is a carbon-rich solid product obtained by the pyrolysis of organic materials. The carbon stability of biochar allows that it can be applied to soil for long-term carbon storage. This carbon stability is greatly influenced by the pyrolysis temperature and the raw material used for biochar production. The aim of the present work is to study the soil carbon sequestration after the application of biochar from sewage sludge (SL) pyrolysis at two different temperatures (400 and 600 °C). For this purpose, soil CO2 emissions were measured for 80 d in an incubation experiment after soil amendment with the SL and each biochar at a dosage of 8 wt%. Biochar reduced the CO2 emissions during incubation between 11% and 32% relative to the SL treatment. The CO2 data were fit to a dual exponential model, and the CO2 emissions were simulated at different times (1, 5 and 10 yr). Additionally, the kinetics of the CO2 evolution from SL, two biochar samples, soil and amended soil were well fit to a dual first-order kinetic model with correlation coefficients greater than 0.93. The simulation of CO2 emissions from the soil by applying the proposed double first-order kinetic model (kg CO2-C ha(-1)) showed a reduction of CO2 emissions between 301 and 932 kg CO2-C ha(-1)with respect to the direct application of raw sewage sludge after 10 yr.

Automation in haemostasis

Automatia, an ancient Greece goddess of luck who makes things happen by themselves and on her own will without human engagement, is present in our daily life in the medical laboratory. Automation has been introduced and perfected by clinical chemistry and since then expanded into other fields such as haematology, immunology, molecular biology and also coagulation testing. The initial small and relatively simple standalone instruments have been replaced by more complex systems that allow for multitasking. Integration of automated coagulation testing into total laboratory automation has become possible in the most recent years. Automation has many strengths and opportunities if weaknesses and threats are respected. On the positive side, standardization, reduction of errors, reduction of cost and increase of throughput are clearly beneficial. Dependence on manufacturers, high initiation cost and somewhat expensive maintenance are less favourable factors. The modern lab and especially the todays lab technicians and academic personnel in the laboratory do not add value for the doctor and his patients by spending lots of time behind the machines. In the future the lab needs to contribute at the bedside suggesting laboratory testing and providing support and interpretation of the obtained results. The human factor will continue to play an important role in testing in haemostasis yet under different circumstances.

Effects of sewage sludge biochar on plant metal availability after application to a Mediterranean soil

Pyrolytic conversion of sewage sludge into biochar could be a sustainable management option for Mediterranean agricultural soils. The aim of this work is to evaluate the effects of biochar from sewage sludge pyrolysis on soil properties; heavy metals solubility and bioavailability in a Mediterranean agricultural soil and compared with those of raw sewage sludge. Biochar (B) was prepared by pyrolysis of selected sewage sludge (SL) at 500°C. The pyrolysis process decreased the plant-available of Cu, Ni, Zn and Pb, the mobile forms of Cu, Ni, Zn, Cd and Pb and also the risk of leaching of Cu, Ni, Zn and Cd. A selected Mediterranean soil was amended with SL and B at two different rates in mass: 4% and 8%. The incubation experiment (200 d) was conducted in order to study carbon mineralization and trace metal solubility and bioavailability of these treatments. Both types of amendments increased soil respiration with respect to the control soil. The increase was lower in the case of B than when SL was directly added. Metals mobility was studied in soil after the incubation and it can be established that the risk of leaching of Cu, Ni and Zn were lower in the soil treated with biochar that in sewage sludge treatment. Biochar amended samples also reduced plant availability of Ni, Zn, Cd and Pb when compared to sewage sludge amended samples.

Learning curve for Doppler measurement of fetal modified myocardial performance index

OBJECTIVE

To assess the learning curve for measurement of the fetal modified myocardial performance index (MPI).

METHODS

Three trainees with the theoretical knowledge of but without prior experience in performing MPI measurement were selected. Each trainee and one experienced examiner measured MPI in a cohort of 90 consecutive fetuses. The average difference between the three trainees and the expert in the MPI measurements was calculated; a difference below 10% was considered to indicate an accurate measurement. Individual and averaged learning curves were delineated using cumulative sum analysis (CUSUM).

RESULTS

The gestational age at evaluation ranged from 20 + 4 to 41 + 4 (mean, 33 + 3) weeks. The CUSUM plots demonstrated that, on average, competence in performing fetal MPI measurement was achieved by 65 cases. The average number of attempts to achieve competence were 42, 77 and 83 for the ejection time, isovolumetric contraction time and isovolumetric relaxation time, respectively.

CONCLUSIONS

Evaluation of fetal MPI by an inexperienced trainee requires on average 65 measurements to achieve competence.

Adsorbent materials from paper industry waste materials and their use in Cu(II) removal from water

This paper deals with the removal of Cu(2+) from water using adsorbent materials prepared from paper industry waste materials (one de-inking paper sludge and other sludge from virgin pulp mill). Experimental results showed that de-inking paper sludge leads to mesoporous materials (V(mic)/V(T)=0.13 and 0.14), whereas the sludge from virgin pulp mill produces high microporous adsorbents (V(mic)/V(T)=0.39 and 0.41). Adsorbent materials were then used for Cu(2+) removal from water at acid pH. During water treatment, heavy metals lixiviation from adsorbent materials was not produced. However, important Ca and Mg leaching was observed. Final pH significantly increases after treatment of water with adsorbent materials probably due to their elevated CaCO(3) content. In general, highest Cu(2+) removal was obtained using adsorbent materials from de-inking paper sludge. This result could be due to their higher content in oxygenated surface groups, high average pore diameter, elevated superficial charge density, high CaCO(3) amount and high Ca and Mg exchange content.

[Tracheal intubation guided by fibrobronchoscopy in patients with difficult airway. Predictive factors of the outcome]

INTRODUCTION AND OBJECTIVE

Tracheal intubation (TI) guided by fibrobronchoscopy (FB) is one of the essential techniques in the approach to the difficult airway (DAW). Few works have been published on the possible causes of TI failure with this procedure. This study aims to discover which factors could predict TI failure with FB.

MATERIAL AND METHODS

An observational and retrospective study in which the last 122 consecutive TIs guided by FB (between January 2000 and April 2008) performed by our group were included. A multivariate analysis of the factors that could influence in the outcome was conducted: cause of the DAW, TI pathway, type of endotracheal tube, elective or urgent indication of the procedure, sedation level and experience of the bronchoscopist.

RESULTS

Tracheal intubation in individuals who are going to undergo surgical interventions accounts for 92.6% of the total. The most frequent indications of TI by FB were: limitation of neck movement (60 cases), airway stenosis (24), increase of soft tissues (13), narrow oral aperture (9), airway compression (6), and vocal cord paralysis (6). In 10 (8.2%) cases, TI by FB was not possible. The variables that best predicted IT failure in the multivariate analysis were profound sedation/ general anesthesia (OR = 12.2; 95% CI, 1.8-84; p = 0.01) and limited experience of the bronchoscopist (OR = 25.3; 95% CI, 3.5-181.8; p = 0.001).

CONCLUSIONS

TI guided by FB performed by bronchoscopist is successful in more than 90% of the cases with DAW. The skill and experience of the bronchoscopist is one of the primary determining factors of success of the procedure. Profound sedation may condition TI guided by FB failure.

Objective characterization of oesophageal voice supporting medical diagnosis, rehabilitation and monitoring

Otolaryngologists use computational tools in the objective diagnosis of vocal folds pathologies by means of a set of acoustic parameters among others. This can be achieved in the cases of slight pathologies, but it does not exist any commercial software suitable for severe degradations of speech, as they are the oesophageal voice of laryngectomees. The present article shows a high-accuracy algorithm for the detection of the periodicity cycles of both oesophageal and laryngeal voices with low quality which allows the accurate and automatic estimation of pitch, jitter and shimmer. As the proposed algorithm works also with slighter pathologies, it is a useful contribution which allows doctors to perform an objective control during rehabilitation and monitoring stages. Thus, a patient can be controlled during oesophageal voice learning stage and it can also be saved a medical record with the results of the acoustic parameters' measurements in order to detect possible relapses.

Effects of optical brighteners used in biopesticide formulations on crops: reflectance, stomatal conductance, photosynthesis, and growth

Optical brighteners have attracted interest as adjuvant's in baculovirus-based biological insecticides due to their ability enhance the insecticidal properties of these viruses and protect virus particles from the degrading effects of ultraviolet (UV) radiation. The effects of two types of optical brighteners, Tinopal CBS (a distyryl-biphenyl derivative) and Tinopal C1101 (an ethenediyl benzenesulfonic derivative) at 1 or 3% (wt./vol.), on growth of different crOPs [maize, Zea mays L. (var. HY-311), sorghum, Sorghum vulgare Pers. (var. Silo), tomato, Lycopersicum esculentum L. (var. Floradade IT), or pepper, Capsicum annum L. (var. Cal Won 300)] were examined after once a week application during four weeks. Both compounds significantly affected the growth of maize plants, whereas sorghum plants were affected only at the highest concentration of Tinopal C1101. Neither brightener had negative effects on tomato or peppers plants. Both compounds increased the percentage of reflectance of maize and tomato leaves when analyzed using laboratory and field spectrophotometers. A greenhouse experiment involving single application of 1 and 3% Tinopal C1101 indicated that the stomatal conductance and photosynthetic rate of maize and tomato plants were not significantly affected. We conclude that the effects of optical brighteners on plant growth are more likely to be influenced by differences between plant species than differences between brightener compounds.

Nonlinear optical waveguides generated in lithium niobate by swift-ion irradiation at ultralow fluences

A novel method to produce optical waveguides is demonstrated for lithium niobate (LiNbO(3)). It is based on electronic excitation damage by swift ions, i.e., with energies at approximately 1 MeV/amu or above. The new technique uses high-energy medium-mass ions, such as Cl, with electronic stopping powers above the threshold value for amorphization (5-6 keV/nm), reaching the maximum value a few micrometers inside the crystal. At the ultralow fluence regime (10(12)-10(13) cm(-2)) an effective nanostructured medium is obtained that behaves as an optical waveguide where light propagates transversally to the amorphous nanotracks created by every single impact. The method implies a reduction of 4 orders of magnitude with respect to He implantation. The optical waveguides present reasonable losses (~10 dB/cm) and significant second-harmonic generation (SHG) and electro-optic (EO) responses (>50% bulk) for the lowest fluences.

An oligoarray for the detection of human papillomavirus type 16 variants

On the basis of human papillomavirus (HPV) E6 gene mutations, there are more than five variants of HPV 16. We applied a sensitive and specific stacking hybridization assay using an oligoarray for the detection of Asian–American (AA) and European (E) (E350G) HPV 16 variants. A simple glass slide was coated with capture probes consisting of short oligonucleotide DNA sequences (7–9 mers) specific for AA and E variants. Two different regions of the E6 HPV 16 gene were amplified with a set of two primers, which were used as target DNA. These targets were preannealed with auxiliary labeled oligonucleotides and hybridized to the oligoarray in the presence of specific and complementary capture probes. Our designed array based on shorter capture probes successfully discriminated between HPV 16 AA and E variants. The present DNA oligoarray system could be useful as a reliable technique for HPV 16 detection and does not require specialized equipment; nevertheless, further intra- and interlaboratory studies are needed.

Variaciones anatómicas de la muñeca y mano en imágenes

Dada la complejidad de la cirugía en la mano y la frecuente aparición de variaciones anatómicas en este territorio, que se apartan de las descripciones de los clásicos atlas o libros de texto, pretendemos mostrar en imágenes y describir distintas variaciones anatómicas de la muñeca y mano en disecciones realizadas y fotografiadas durante los últimos 10 años en la sala de disección del Departamento de Anatomía y Embriología Humana (Facultad de Medicina, Universidad de Barcelona) en 100 especímenes. Las variaciones se han clasificado según su componente anatómico: arterias, nervios, tendones y músculos. Se ha realizado una descripción breve de la variación. La intención es llamar la atención sobre la posibilidad de la existencia de variaciones anatómicas a nivel de los diferentes componentes de la mano, para así evitar posibles lesiones durante los abordajes de la muñeca y de la mano.

Study of KIR genes in tuberculosis patients

A total of 97 patients with tuberculosis (TB) and 51 controls from Xalapa, Veracruz, Mexico, were studied for the presence and absence of killer cell immunoglobulin-like receptor (KIR) genes. The number of patients with either KIR2DL1 or KIR2DL3 differed significantly compared with the controls. However, only the difference in KIR2DL3 remained significant after correction for the number of factors analysed. We also found KIR2DS2 with its presumed C1 group ligand less prevalent in TB patients than in the control group, but this result lost significance after correction.

African swine fever and classical swine fever: a review of the pathogenesis

This paper describes major pathogenetic mechanisms of African and Classical Swine Fever virus infections. The interactions between both viruses and the monocyte-macrophage-system result in the release of mediator molecules, which are important for the further progression of the diseases. The causes of the thrombocytopenia and the mechanisms of the haemorrhages, which are characteristic in both infections, are described. Apoptotic cell death is regarded as the predominant cause of lymphopenia in both virus infections.

The effect of the reinforcing carbon on the microstructure of pitch-based granular composites

Carbon composites were prepared with four pitches (a commercial impregnating coal-tar pitch, two thermally treated pitches and an air-blown pitch) and four granular carbons (anthracite, graphite, green petroleum coke and foundry coke). Granular carbon/pitch proportions were optimized for each composite and differed in the characteristics of the single components. Interactions of the pitch with the granular carbons during pyrolysis and their subsequent effects on the microstructure of the final composite were monitored by light microscopy. The results show that the light texture of the matrix and the porosity of the composite depend not only on the chemical composition of the pitch but also on the specific granular carbon used as reinforcing material. The same pitch may generate different light textures depending on the characteristics of the carbon. Composites from thermally treated pitches and graphite show highly ordered matrices orientated in the direction of graphite planes. Graphite particles seem to exert a huge influence on mesophase development during the pyrolysis of the treated pitches, affecting not only the orientation of the mesophase, but also reducing the rate of mesophase formation. On the other hand, when green petroleum coke is used with the thermally treated pitches, matrices show a small size light texture, due to the high reactivity of the pitch in the presence of this granular carbon. The porosity of the composites is controlled by both the pitch and the granular carbon.

Colostomy closure using local anesthesia

The feasibility of performing colostomy closures using local anesthesia was evaluated. The subjects comprised 14 patients: 2 with colostomies involving a mucous fistula and 12 with loop colostomies. Patients who had colostomies with mucous fistulas separated by 10cm or more were excluded from this study. All patients were graded as ASA 1 (according to the American Society of Anesthesiologists). The bowel was evaluated by colonoscopy in 6 patients and by barium enema in 8 patients. Bowel preparation was performed with Colayte and all patients were given prophylactic antibiotics. Closure of the colostomy was extraperitoneal and the time taken to perform the operation ranged from 40 to 120min. Tolerance was regarded as excellent in 9 patients, good in 3, and average in 2. There were 3 anastomotic leaks that resolved without further surgical treatment, 2 wound infections, and 1 bowel obstruction that was successfully treated with medication. Patients were discharged 2-22 days postoperatively, after a mean period of 9 days. Local anesthesia offers a safe and effective alternative to general or regional anesthesia for surgical closure of colostomies.