Health risk assessment of metal(loid)s in soil and particulate matter from industrialized regions: A multidisciplinary approach

In this study, samples of soil and particulate matter obtained from the highly industrialized region of Ostrava, Czech Republic, are used for the toxicity evaluation of the selected metal(loid)s (Cd, Cr, Cu, Ni, Pb, Zn, As). We investigated the samples from sites supposedly affected the most by the local pollution sources using mineralogical techniques (XRD, SEM/EDS) to understand the solid speciation of the contaminants as the crucial factor affecting their release. Although the bulk composition was defined by common silicates and oxides that are rather resistant to leaching, the presence of tiny Ni, Pb, and/or Zn sulfate-like droplets indicated a potential increase of the solubility of these metals. In vitro tests simulating gastric and lung fluids were used to assess the exposure risk for humans, as well as metal(loid) bioaccessibility. Based on the results, the potential risk for the observed age group (3-year-old children) could be recognized, particularly in the cases of As, Pb and Cd for both oral and inhalation exposure. Arsenic exhibits high bioaccessibility (7.13-79.7%, with the median values of 10.6 and 15.6 for SGL and SLF, respectively), high daily intake (1.4- to 8.5-fold higher than the tolerable daily intake) and high concentrations in atmospheric PM₁₀ (2.5 times the tolerable concentration in air). In contrast, Ni exceeded tolerable concentrations in the atmosphere up to 20-fold, but its bioaccessibility remained relatively low (0.1-22%), and Ni did not pose a major threat to human health. Cadmium, Pb and As originating from industrial activities and domestic heating have been suggested to be the most important pollutants (tolerable daily intake was exceeded by up to 74-, 34- and 8-fold for Cd, Pb and As, respectively).

Joint action goals reduce visuomotor interference effects from a partner's incongruent actions

Joint actions often require agents to track others’ actions while planning and executing physically incongruent actions of their own. Previous research has indicated that this can lead to visuomotor interference effects when it occurs outside of joint action. How is this avoided or overcome in joint actions? We hypothesized that when joint action partners represent their actions as interrelated components of a plan to bring about a joint action goal, each partner’s movements need not be represented in relation to distinct, incongruent proximal goals. Instead they can be represented in relation to a single proximal goal – especially if the movements are, or appear to be, mechanically linked to a more distal joint action goal. To test this, we implemented a paradigm in which participants produced finger movements that were either congruent or incongruent with those of a virtual partner, and either with or without a joint action goal (the joint flipping of a switch, which turned on two light bulbs). Our findings provide partial support for the hypothesis that visuomotor interference effects can be reduced when two physically incongruent actions are represented as mechanically interdependent contributions to a joint action goal.

Unleaded gasoline as a significant source of Pb emissions in the Subarctic

After the phasing out of leaded gasoline, Pb emissions to the atmosphere dramatically decreased, and other sources became more significant. The contribution of unleaded gasoline has not been sufficiently recognized; therefore, we evaluated the impact of Pb from unleaded gasoline in a relatively pristine area in Subarctic NE Norway. The influence of different endmembers (Ni slag and concentrate from the Nikel smelter in Russia, PM₁₀ filters, and traffic) on the overall Pb emissions was determined using various environmental samples (snow, lichens, and topsoils) and Pb isotope tracing. We found a strong relationship between Pb in snow and the Ni smelter. However, lichen samples and most of the topsoils were contaminated by Pb originating from the current use of unleaded gasoline originating from Russia. Historical leaded and recent unleaded gasoline are fully distinguishable using Pb isotopes, as unleaded gasoline is characterized by a low radiogenic composition (²⁰⁶Pb/²⁰⁷Pb = 1.098 and ²⁰⁸Pb/²⁰⁶Pb = 2.060) and remains an unneglectable source of Pb in the region.

The Sense of Commitment in Individuals With Borderline Personality Traits in a Non-clinical Population

This is the first study to test the hypothesis that individuals' sense of commitment in joint activities and relationships may be influenced by personality traits characteristic of borderline personality disorder (BPD). This study consisted of 3 online experiments implemented via Amazon Mechanical Turk. Participants were presented with videos (Experiment 1) or vignettes (Experiments 2, 3) describing situations in which everyday commitments were violated. Participants then reported their perceptions, interpretations, and affective and behavioral responses to those situations. Participants' BPD traits (BPDt) were assessed using the short form of the Five-Factor Borderline Inventory on the basis of which they were divided into two groups: High and Low BPDt. The results revealed that participants with High BPD traits were less optimistic about others acting in accordance with an implicit sense of commitment (Experiment 1), although there was no difference between groups when the commitment was explicitly stated (Experiment 3). Participants in the High BPDt group also reported heightened emotional responses (Experiments 1-3) and less adaptive behavioral responses (Experiments 1, 3) to perceived or anticipated violations of commitment. Our findings suggest that high levels of BPD traits may give rise to a difficulty in adapting one's social expectations and behavior in light of interpersonal commitments and in a manner that is calibrated to the social norms in the community. Future research should investigate to what extent a disturbed sense of commitment may contribute to the difficulties in interpersonal functioning experienced by many individuals with a clinical diagnosis of BPD.

Stable isotope tracing of Ni and Cu pollution in North-East Norway: Potentials and drawbacks

The use of Ni and Cu isotopes for tracing contamination sources in the environment remains a challenging task due to the limited information about the influence of various biogeochemical processes influencing stable isotope fractionation. This work focuses on a relatively simple system in north-east Norway with two possible endmembers (smelter-bedrock) and various environmental samples (snow, soil, lichens, PM₁₀). In general, the whole area is enriched in heavy Ni and Cu isotopes highlighting the impact of the smelting activity. However, the environmental samples exhibit a large range of δ⁶⁰Ni (-0.01 ± 0.03‰ to 1.71 ± 0.02‰) and δ⁶⁵Cu (-0.06 ± 0.06‰ to -3.94 ± 0.3‰) values which exceeds the range of δ⁶⁰Ni and δ⁶⁵Cu values determined in the smelter, i.e. in feeding material and slag (δ⁶⁰Ni from 0.56 ± 0.06‰ to 1.00 ± 0.06‰ and δ⁶⁵Cu from -1.67 ± 0.04‰ to -1.68 ± 0.15‰). The shift toward heavier Ni and Cu δ values was the most significant in organic rich topsoil samples in the case of Ni (δ⁶⁰Ni up to 1.71 ± 0.02‰) and in lichens and snow in the case of Cu (δ⁶⁵Cu up to -0.06 ± 0.06‰ and -0.24 ± 0.04‰, respectively). These data suggest an important biological and biochemical fractionation (microorganisms and/or metal uptake by higher plants, organo-complexation etc.) of Ni and Cu isotopes, which should be quantified separately for each process and taken into account when using the stable isotopes for tracing contamination in the environment.

Suitability of selected bioindicators of atmospheric pollution in the industrialised region of Ostrava, Upper Silesia, Czech Republic

This study is a continuation of our preceding research identifying suitable environmental samples for the tracing of atmospheric pollution in industrial areas. Three additional types of environmental samples were used to characterise contamination sources in the industrial area of Ostrava city, Czech Republic. The region is known for its extensive metallurgical and mining activities. Fingerprinting of stable Pb isotopes was applied to distinguish individual sources of anthropogenic Pb. A wide range of ²⁰⁶Pb/²⁰⁷Pb ratios was observed in the investigated samples: ²⁰⁶Pb/²⁰⁷Pb = 1.168-1.198 in mosses; ²⁰⁶Pb/²⁰⁷Pb = 1.167-1.215 in soils and ²⁰⁶Pb/²⁰⁷Pb = 1.158-1.184 in tree cores. Black and brown coal combustion, as well as metallurgical activities, is the two main sources of pollution in the area. Fossil fuel burning in industry and households seems to be a stronger source of Pb emissions than from the metallurgical industry. Concentration analyses of tree rings showed that a significant increase in As concentrations occurred between 1999 and 2016 (from 0.38 mg kg^-1 to 13.8 mg kg^-1). This shift corresponds to the use of brown coal from Bílina, Czech Republic, with an increased As concentration. The burning of low-quality fuels in households remains a problem in the area, as small ground sources have a greater influence on the air quality than do industrial sources.

Evaluating the suitability of different environmental samples for tracing atmospheric pollution in industrial areas

Samples of lichens, snow and particulate matter (PM₁₀, 24 h) are used for the source identification of air pollution in the heavily industrialized region of Ostrava, Upper Silesia, Czech Republic. An integrated approach that uses different environmental samples for metal concentration and Pb isotope analyses was applied. The broad range of isotope ratios in the samples indicates a combination of different pollution sources, the strongest among them being the metallurgical industry, bituminous coal combustion and traffic. Snow samples are proven as the most relevant indicator for tracing metal(loid)s and recent local contamination in the atmosphere. Lichens can be successfully used as tracers of the long-term activity of local and remote sources of contamination. The combination of PM₁₀ with snow can provide very useful information for evaluation of current pollution sources.