An optical biosensor for monitoring recombinant proteins in process media

This paper describes the construction of a sensor for the direct monitoring of a recombinant protein, the human insulin analogue (MI3). The surface plasmon resonance (SPR) sensor incorporates an immobilised, sterilisable affinity-ligand that has been designed to bind to MI3. In practice, gold SPR devices were fabricated with; a 2D assembly of ethanethiol-modified ligand, a 2D mixed-assembly of ethanethiol-modified ligand and mercaptoethanol, a 3D coating of ligand-modified terminal-thiolated poly(vinyl)alcohol (PVA) or a 3D hydrogel of dextran coupled to a self-assembled monolayer (SAM) of mercaptohexaneundecanl-ol. Routine measurement of the concentration MI3 in the concentration range 1-100 mg/l in pilot-scale samples of crude fermentation broth have been achieved with high sensitivity levels and a high signal-to-noise ratio. Analysis can be achieved within < 10 min with the active surface being regenerable for at least 60 cycles over a 6 month period. The coupling of a robust, sterilisable and highly-selective sensor-coating with suitable transducer technologies promises to deliver sensors that are capable of direct in situ monitoring of biopharmaceuticals in industrial bioprocesses.

Covalent coupling of immunoglobulin G to self-assembled monolayers as a method for immobilizing the interfacial-recognition layer of a surface plasmon resonance immunosensor

Protocols have been developed for the random and site-directed covalent coupling of immunoglobulin G [anti-hIgG] [IgG] to silver surfaces modified with a self-assembled monolayer [SAM] of thioctic acid, mercaptopropionic acid [MPA], L-cysteine or 4-aminothiophenol [PATP]. A surface plasmon resonance [SPR] immunosensor fabricated with a more ordered and hydrophilic IgG-SAM-silver interfacial layer, demonstrates an increased ability for performing sensitive and selective assay of human immunoglobulin G [hIgG] compared with a device fabricated with a physically-adsorbed IgG-silver interfacial-layer due to reduced levels of non-specific binding. Detection limits [DL] for hIgG from serum down to 6 micrograms/ml (40 nM) and assay sensitivities up to 0.24 ng hIgG/mm2/nM are reported.

Covalent coupling of immunoglobulin G to a poly(vinyl)alcohol-poly(acrylic acid) graft polymer as a method for fabricating the interfacial-recognition layer of a surface plasmon resonance immunosensor

The synthesis of a terminally thiolated poly(vinyl)alcohol (PVA) grafted with Poly (acrylic acid) (PAA) side chains is described. The PVA-PAA graft polymer (PVAg) was end-tethered to silver surfaces via the terminal thiol functionality and the resultant mobile, hydrophilic polymer matrix exploited for the covalent immobilization of large quantities of polyclonal goat (anti-hIgG) antibody (IgG) with low levels of non-specific adsorption. An SPR immunosensor, fabricated with an IgG-PVA-silver interfacial layer proved capable of performing a sensitive label-free assay of human IgG antigen (hIgG) with minimal non-specific binding interference. A detection limit (DL) for hIgG from serum of 0.8 microgram/ml (5 nM) and an assay sensitivity of 0.66 ng hIgG/mm2/nM are reported.

Physical adsorption of immunoglobulin G on gold studied by scanning tunnelling microscopy

This paper describes a preliminary scanning tunnelling microscope (STM) study of the physical adsorption of a mouse monoclonal anti-hCG (human chorionic gonadotrophin) immunoglobulin G (IgG) on vacuum-evaporated gold surfaces in air. Ellipsoid-like protrusions of various geometric sizes assembled in different surface patterns were observed on scanning adsorbed IgG molecules. It is believed that both the adsorption process per se and the tip-molecule interactions are key factors which determine the topographical features of adsorbed IgG molecules.