Predicting the Long-term Creep Behavior of Plastics Using the Short-term Creep Test

The creep performance of plastics is one of the main criteria for a variety of applications which requires a strict dimensional stability, including electrical/electronic parts and various automotive applications. However, obtaining or generating accurate creep data is very difficult for both resin suppliers and product designers because the creep property is time dependent, which means it takes over several weeks or even a year of time span. Hence a faster and more reliable method predicting creep behavior of plastics is needed when designing plastic products that will encounter long-term loading. This work presents an easy method for predicting the long-term creep behavior of plastics using the short-term creep experimental data. The flexural creep experiments of three plastics, ABS (Acrylonitrile butadiene styrene), PC/ABS (PC and ABS alloy) and LFT (Long fiber reinforced thermoplastics), are performed. For a quick and reliable prediction of long-term creep behavior of plastics, time regional power-law model and time-stress modulus are introduced. To analyze the reliability and validity of the proposed method, the creep analyses based on the proposed method are performed. The comparison between the FEA results and the creep tests has shown that the new method can track both primary and secondary creep behavior over a long time. The creep analyses have been carried out by commercial FE Code.

CT scan assessment of the pathway of the true lateral approach for transforaminal endoscopic lumbar discectomy

We performed a prospective study to examine the influence of the patient’s position on the location of the abdominal organs, to investigate the possibility of a true lateral approach for transforaminal endoscopic lumbar discectomy. Pre-operative abdominal CT scans were taken in 20 patients who underwent endoscopic lumbar discectomy. Axial images in parallel planes of each intervertebral disc from L1 to L5 were achieved in both supine and prone positions. The most horizontal approach angles possible to avoid injury to the abdominal organs were measured. The results demonstrated that the safe approach angles were significantly less (i.e., more horizontal) in the prone than in the supine position. Obstacles to a more lateral approach were mainly the liver, the spleen and the kidneys at L1/2 (39 of 40, 97.5%) and L2/3 (28 of 40, 70.0%), and the intestines at L3/4 (33 of 40, 82.5%) and L4/5 (30 of 30, 100%). A true lateral approach from each side was possible for 30 of the 40 discs at L3/4 (75%) and 23 of the 30 discs at L4/5 (76.7%). We concluded that a more horizontal approach for transforaminal endoscopic lumbar discectomy is possible in the prone position but not in the supine. Prone abdominal CT is more helpful in determining the trajectory of the endoscope. While a true lateral approach is feasible in many patients, our study shows it is not universally applicable.

Study on in vitro release patterns of fentanyl-loaded PLGA microspheres

In order to study the development of the delivery device of long-acting local anaesthetics for post-operative analgesia and control of chronic pain of cancer patient, fentanyl loaded poly(l-lactide-co-glycolide) (PLGA, molecular weight; 5000, 8000, 20,000, and 33,000 g/mole) microspheres (FMS) were studied. FMS were prepared by an emulsion solvent-evaporation method. The influence of several preparation parameters such as initial drug loading, PLGA concentrations, emulsifier concentrations, oil phase volume and mole ratio and molecular weight has been investigated on the fentanyl release patterns. Generally, the drug showed the biphasic release patterns, with an initial diffusion followed by a lag period before the onset of the degradation phase, but there were no lag times in the device. Fentanyl was slowly released from FMS over 10 days in vitro, with a quasi-zero order property. The release rate increased with increasing drug loading as well as increasing polymer concentration with a relatively small initial burst effect. From the results, FMS may be a good formulation to deliver the anaesthesia for the treatment of chronic pain.

Quantitative analysis of fentanyl in rat plasma by gas chromatography with nitrogen-phosphorus detection

A sensitive assay method was developed to determine fentanyl, an opiate agonist, in rat plasma by gas chromatography with nitrogen-phosphorus detection. For the pretreatment of plasma samples, sodium hydroxide was added to denature protein and n-butyl chloride was used to extract fentanyl. The calibration curve was linear within the concentration range 0.5 to 50 ng/ml (r=0.9997). The limit of detection was 0.1 ng/ml, and 0.5 ng/ml could be quantified with acceptable precision. Furthermore, fentanyl could be determined in only 200 microl of rat plasma. The method has been successfully applied to an intramuscular pharmacokinetic study at a dose of 10 microg/kg. Therefore, the current method is a valuable analytical tool for investigating the pharmacokinetics of fentanyl at low clinical doses.

Optimal Oct-2 affinity for an extended DNA site and the effect of GST fusion on site preference

The regulator of immunoglobulin expression Oct-2 and the related widely expressed transcription factor Oct-1 have been shown to interact with DNA sequences containing an "octamer" motif, ATGC(A/T)AAT. To better understand Oct-2 function we have used random oligonucleotide selection and competition assays to define the optimal recognition site for this protein. The selected site contains an extended sequence that is remarkably similar to octamer-heptamer sequences found in immunoglobulin heavy-chain regulatory sequences, and the affinity of Oct-2 for this site is at least 50-fold greater than for sites containing the octamer motif alone. Fusion to glutathione S-transferase, a widely used model for protein-DNA and protein-protein interaction, does not alter the optimal Oct-2 recognition site, but inhibits Oct-2 POU-domain dimerization, slows the dissociation rate of the GST-Oct-2/DNA complex, and increases the relative importance of the heptamer domain for Oct-2 binding. These data advance our ability to identify in vivo targets of POU-factor regulation and also suggest that GST-fusion proteins should be used with caution in DNA-binding studies.

Defects in sensory axon growth precede neuronal death in Brn3a-deficient mice

Brn3a/Brn-3.0 is a POU-domain transcription factor expressed in primary sensory neurons of the cranial and dorsal root ganglia and in specific neurons in the caudal CNS. Mice lacking Brn3a undergo extensive sensory neural death late in gestation and die at birth. To further examine Brn3a expression and the abnormalities that accompany its absence, we constructed a transgene containing 11 kb of Brn3a upstream regulatory sequence linked to a LacZ reporter. Here we show that these regulatory sequences direct transgene expression specifically to Brn3a peripheral sensory neurons of the cranial and dorsal root ganglia. Furthermore, expression of the 11 kb/LacZ reporter in the sensory neurons of the mesencephalic trigeminal, but not other Brn3a midbrain neurons, demonstrates that cell-specific transgene expression is targeted to a functional class of neurons rather than to an anatomical region. We then interbred the 11 kb/LacZ reporter strain with mice carrying a null mutant allele of Brn3a to generate 11 kb/LacZ, Brn3a knock-out mice. beta-Galactosidase expression in these mice reveals significant axonal growth defects, including excessive and premature branching of the major divisions of the trigeminal nerve and a failure to correctly innervate whisker follicles, all of which precede sensory neural death in these mice. These defects in Brn3a(-/-) mice resemble strongly those seen in mice lacking the mediators of sensory pathfinding semaphorin 3A and neuropilin-1. Here we show, however, that sensory neurons are able to express neuropilin-1 in the absence of Brn3a.

Preparation and characterization of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) microspheres for the sustained release of 5-fluorouracil

Biodegradable microspheres were prepared with poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV, 85:15 by mole ratio of hydroxybutyrate to hydroxyvalerate) by an water-in-oil-in-water (W/O/W), oil-in-water (O/W) and oil-in-oil (O/O) solvent evaporation method for the sustained release of anti-cancer drug, 5-fluorouracil (5-FU) with controlling the fabrication conditions. The shape of microspheres prepared was relatively rough due to highly crystalline property of PHBV and spherical. The efficiency of 5-FU loading into the PHBV microsphere with O/O method was over 80% compared to that 7% for microspheres by O/W method and below 1% for microspheres by a conventional W/O/W method. However, the most desirable release pattern can be achieved from the O/W method due to the cosolvent effect. The effects of preparation conditions such as the type and amount of surfactant, initial amount of loaded drug, the temperature of solvent evaporation, and etc. on the morphology for W/O/W method were investigated. Possible mechanisms of the desirable sustained release pattern for O/W system have been proposed.

Cellular contribution of bone graft to fusion

Although a number of studies have examined the fate of graft-derived cells during the process of fusion, there remains no consensus regarding their exact contribution to bone formation within the fusion mass. We developed two chimeric mouse isograft fusion models that allowed us to track the fate of graft cells within the host fusion bed. Cortical/cancellous bone graft (1:1 ratio of pelvic to vertebral body bone) from male mice was placed between (a) the tibia and fibula or (b) the coccygeal spine transverse processes of syngeneic female hosts. Both models were characterized histologically and histochemically. Graft-derived cells were then identified by fluorescent in situ hybridization for Y-chromosome sequences present in only the graft (male) cells. When the fusion mass was healing but not yet fused (at 1 and 2 weeks), numerous graft-derived cells were observed throughout the fusion site. The predominant graft-derived cell types included chondrocytes, osteoblasts, and fibroblasts. Chondrocytes arose from precursor cells in the graft de novo. as cartilage was not transplanted during the surgical procedure. By the time a mature fusion mass had formed (at 6 weeks), graft-derived cells persisted as osteocytes within the cortical rim surrounding the fusion mass. These osteocytes likely differentiated from graft-derived precursors that had directly formed bone, because transplanted osteocytes within cortical bone graft fragments were noted to rarely survive even at 1 and 2 weeks. Collectively, our results demonstrate for the first time that bone graft contributes cells that, in conjunction with host cells, directly form bone within the fusion mass during all phases of fusion rather than just the early phases.

Nifedipine controlled delivery by sandwiched osmotic tablet system

The sandwiched osmotic tablet system (SOTS), which is composed of a sandwiched osmotic tablet core surrounded by a cellulose acetate membrane with two orifices on both side surfaces, has been successfully prepared with the purpose of delivering nifedipine. The sandwiched osmotic tablet core consists of a middle push layer and two attached drug layers. Influences of tablet formulation variables, orifice size and membrane variables on nifedipine release of SOTS have been studied. It was found that potassium chloride amount of push layer and polyethylene oxide amount of drug layer had markedly positive effects on nifedipine release. A push layer/drug layer co-controlled osmotic delivery mechanism and the optimal core formulation have been proposed. The appropriate orifice size was observed in the range of 0.50-1.41 mm. It was also found that the drug release rate of SOTS could be increased by incorporating hydrophilic plasticizer in the membrane, whereas it decreased with hydrophobic plasticizer. It has been observed that the SOTS gives fairly comparable in vitro release features as that of commercialized push-pull osmotic tablet system, such as an approximately constant rate up to 24 h and independence of release media and agitation rate. Exempting side identification before drilling, it is easier to prepare the SOTS than the push-pull osmotic tablet system.

Monolithic osmotic tablet system for nifedipine delivery

The monolithic osmotic tablet system, which is composed of a monolithic tablet coated with cellulose acetate (CA) membrane drilled with two orifices on both side surfaces, has been described. The influences of tablet formulation variables including molecular weight (MW) and amount of polyethylene oxide (PEO), amount of potassium chloride (KCl), and amount of rice starch as well as nifedipine loading have been investigated. The optimal tablet formulation and the osmotic-suspending co-controlled delivery mechanisms have been proposed. Orifice size and membrane variables including nature and amount of plasticizers as well as thickness on drug release have also been studied. The in vitro release profiles of the optimal system have been evaluated in various release media and different agitation rates, and compared with commercialized conventional capsule and push-pull osmotic tablet. It was found that PEO with MW of 300000 g/mol was suitable to be thickening agent, both amount of KCl and amount of PEO had comparable and profoundly positive effects, while nifedipine loading had a strikingly negative influence on drug release. It could be found that the optimal orifice size was in the range of 0.25-1.41 mm. It has also been observed that hydrophilic plasticizer polyethylene glycol (PEG) improved drug release, whereas hydrophobic plasticizer triacetin depressed drug release when they were incorporated in CA membrane. The monolithic osmotic tablet system was found to be able to deliver nifedipine at the rate of approximate zero-order up to 24 h, independent of both environmental media and agitation rate, and substantially comparable with the push-pull osmotic tablet. The monolithic osmotic tablet system was simple to be prepared as exempting from push layer and simplifying in the orifice drilling compared with the push-pull osmotic tablet. The monolithic osmotic tablet system may be used in drug controlled delivery field, especially suitable for water-insoluble drugs.

Sandwiched osmotic tablet core for nifedipine controlled delivery

The sandwiched osmotic tablet core, which is composed of a middle push layer and two attached drug layers, has been prepared and systematically studied with the purpose of delivering water-insoluble nifedipine. The advantage of the sandwiched osmotic tablet system over the commercialized push-pull osmotic tablet system is its simplicity of preparation, as the surface identification was avoided. It was observed that polyethylene oxides (PEO) with molecular weight (MW) of 300,000 and 8,000,000 g/mole were suitable for the thickening agent of drug layer and the expandable hydrogel of push layer, respectively. The weight ratio of 190/190 for drug layer/push layer was also found to be suitable. It has been observed that PEO amount of the push layer and the KCl amount of the drug layer had profoundly positive influence on nifedipine release. A push layer/drug layer co-controlled osmotic delivery mechanism has been proposed and the optimal tablet formulation has been obtained. It was also found that PEO and nifedipine were miscible, which may support the application of PEO in nifedipine dosage forms. Meanwhile, the PEO/nifedipine binary phase diagram has been constructed. The sandwiched osmotic tablet system can deliver nifedipine in an approximate zero-order rate up to 24 hours. It may be potentially used for the delivery of water-insoluble drugs.

Preparation and characterization of Japanese encephalitis virus vaccine loaded poly(L-lactide-co-glycolide) microspheres for oral immunization

Japanese encephalitis virus (JEV) vaccine loaded biodegradable poly(L-lactide-co-glycolide) (PLGA) microspheres (MSs) were prepared by W/O/W solvent evaporation method to study the possibility for oral vaccination. The influence of several preparation parameters as stirring rate, types and concentration of emulsifier, PLGA concentration, etc. has been observed on size, size distribution and biodegradation. The mean MSs size decreased when the agitation speed and the concentration of emulsifier were increased, and when the PLGA concentration was decreased. The surface morphology of porous and nonporous JEV vaccine loaded PLGA MSs was prepared from polyvinylalcohol and sodium dodecyl sulfate as used emulsifiers, respectively. From the assay of lactic acid and scanning electron microscope observation, it can be suggested that the rate of biodegradation of nonporous MSs was slower than that of porous surface morphology due to lower the surface area. Mechanisms of the formation of porous and nonporous surface by different types of emulsifier, and the biodegradation of MSs have been proposed. Also, the size and size distribution of JEV vaccine loaded PLGA MSs were discussed to apply oral vaccination through the Peyer's patches across the gastrointestinal tract.

Autoregulatory sequences are revealed by complex stability screening of the mouse brn-3.0 locus

The POU-IV or Brn-3 class of transcription factors exhibit conserved structure, DNA-binding properties, and expression in specific subclasses of neurons across widely diverged species. In the mouse CNS, Brn-3.0 expression characterizes specific neurons from neurogenesis through the life of the cell. This irreversible activation of expression suggests positive autoregulation. To search for cis-acting elements that could mediate autoregulation we used a novel method, complex stability screening, which we applied to rapidly identify functional Brn-3.0 recognition sites within a large genomic region encompassing the mouse brn-3.0 locus. This method is based on the observation that the kinetic stability of Brn-3.0 complexes with specific DNA sequences, as measured by their dissociation half-lives, is highly correlated with the ability of those sequences to mediate transcriptional activation by Brn-3.0. The principal Brn-3.0 autoregulatory region lies approximately 5 kb upstream from the Brn-3.0 transcription start site and contains multiple Brn-3.0-binding sites that strongly resemble the optimal binding site for this protein class. This region also mediates transactivation by the closely related protein Brn-3.2, suggesting a regulatory cascade of POU proteins in specific neurons in which Brn-3.2 expression precedes Brn-3.0.

Highly cooperative homodimerization is a conserved property of neural POU proteins

POU-domain proteins have been shown to play important roles in the development of the nervous, endocrine, and immune systems. However, the distinctive DNA recognition properties of the six major POU subclasses have not been well defined. Here, we have used random oligonucleotide selection and competitive binding assays to determine the optimal DNA recognition elements for the POU-III and POU-VI protein classes, represented by Brn-2 and Brn-5, respectively. The optimal Brn-5 consensus binding sequence GCATAA(T/A)TTAT strongly resembles that previously determined for the POU-IV (Brn-3) class, whereas Brn-2 exhibits highest affinity for non-octamer sites of the form ATG(A/C)AT(A/T)0-2ATTNAT and for octamer sites that contain a full associated heptamer sequence. Brn-2, Brn-3.0, and their invertebrate homologues all exhibit highly cooperative homodimerization on the Brn-2 consensus sequence, demonstrating that cooperative dimerization is a general property of these neural POU proteins. However, modified sites to which Brn-2 binds only as a monomer mediate the transcriptional effects of Brn-2 better than the consensus sequence, demonstrating that dimerization on these sites diminishes the transactivation ability of the protein. Together with the findings of our prior studies these data greatly facilitate the identification of functional POU recognition elements in the regulatory regions of neural genes.

Placodal origin of Brn-3-expressing cranial sensory neurons

The Brn-3 class of POU-domain transcription factors includes three genes in mammals which have key roles in the development of specific groups of sensory neurons. Here, we have identified three avian genes which correspond to the murine genes Brn-3.0, Brn-3.1, and Brn-3.2. Using an in situ hybridization probe generic for this gene class, the earliest detectable expression of Brn-3 in the chick is at stage 15, in placodal and migrating precursors of the trigeminal ganglion. By stage 19, Brn-3.0 protein is detectable in the trigeminal and vestibulocochlear ganglia with Brn-3.0-specific antisera, and Brn-3 message expression has extended to the dorsal root ganglia. At later stages, when condensation of the trigeminal ganglion is complete, Brn-3.0-immunoreactive neurons are concentrated in the portion of the ganglion distal to the brain stem. To examine the developmental origin of the Brn-3 expressing cells, we combined lipophilic dye (DiI) labeling with in situ hybridization. DiI labeling of the placodal surface ectoderm and of premigratory neural crest cells in the neural tube reveals that all, or nearly all, of the Brn3-expressing neurons in the trigeminal ganglia are derived from the sensory placodes and not from the neural crest, and thus, that Brn-3 is an early marker of the placode-derived sensory neural lineage.

Behavior of CHO cells on phosphated cellulose membranes

Phosphate groups (negatively charged chemical groups) were grafted onto the surface of cellulose membranes by a reaction between hydroxyl groups of cellulose and phosphorus pentoxide to observe the effect of phosphate groups on cellular behavior. X-ray photoelectron spectroscopy (XPS) was used to determine phosphorylation. Captive bubble contact angle measurement was used to determine surface wettability. XPS was also used to analyze serum protein adsorption. Chinese hamster ovary (CHO) cells were maintained in Ham's F-12 nutrient mixture with and without fetal calf serum. Total cell area and shape factor were analyzed using image-analyzing software. Serum proteins showed higher adsorption on phosphated cellulose. Cell spreading on phosphated membranes was greater than on the cellulose membrane that served as control. The cell growth rate was faster compared to the control. Large cell aggregates were not found on the phosphated membranes, in contrast to the control membrane. The cells on the control were aggregated regardless of the existence of divalent cations in the medium.

The POU-domain factor Brn-3.0 recognizes characteristic sites in the herpes simplex virus genome

The restriction of herpes virus latency to mammalian sensory ganglia has led to a search for tissue-specific regulatory molecules in these neurons which alter viral gene expression. We have recently shown that the POU-domain transcriptional regulator Brn-3.0 is abundantly expressed in the adult trigeminal ganglion. To begin to examine the hypothesis that Brn-3.0 might participate in the regulation of the HSV life-cycle, we used Brn-3.0 POU-domain protein as an affinity matrix, and biochemically screened the entire HSV genome for sites of Brn-3.0 binding. This screen identified several sites of the form TA/TA A T N A N TA/T, which significantly do not include the previously identified HSV octamer sequences. All of the selected sites occur in the <25% of the HSV genome which has not been assigned to open reading frames, suggesting that these sites may be transcriptional regulatory elements recognized by Brn-3.0 or another homeobox factor with similar DNA binding properties. However, these sites do not interact with Brn-3.0 with sufficiently high affinity to directly mediate transcriptional activation by Brn-3.0 alone in transfection assays. The experiments described also provide an effective general method for exhaustive screening of large viral genomes or sub-genomic fragments of eukaryotic DNA for sites of interaction with specific transcription factors.

POU domain factors of the Brn-3 class recognize functional DNA elements which are distinctive, symmetrical, and highly conserved in evolution

To better understand the diversity of function within the POU domain class of transcriptional regulators, we have determined the optimal DNA recognition site of several proteins of the POU-IV (Brn-3) subclass by random oligonucleotide selection. The consensus recognition element derived in this study, ATAATTAAT, is clearly distinct from octamer sites described for the POU factor Oct-1. The optimal POU-IV site determined here also binds Brn-3.0 with significantly higher affinity than consensus recognition sites previously proposed for this POU subclass. The binding affinity of Brn-3.0 on its optimal site, several variants of this site, and several naturally occurring POU recognition elements is highly correlated with the activation of reporter gene expression by Brn-3.0 in transfection assays. The preferred DNA recognition site of Brn-3.0 resembles strongly the optimal sites of another mammalian POU-IV class protein, Brn-3.2, and of the Caenorhabditis elegans Brn-3.0 homolog Unc-86, demonstrating that the site-specific DNA recognition properties of these factors are highly conserved between widely divergent species.

MEK1 is required for PDGF-induced ERK activation and DNA synthesis in tracheal myocytes

We tested whether activation of mitogen-activated protein kinase/ extracellular signal-regulated kinase kinase-1 (MEK1) is required and sufficient for extracellular signal-regulated kinase (ERK) activation in airway smooth muscle cells. First, we transiently cotransfected bovine tracheal myocytes with an epitope-tagged ERK2 and a dominant-negative or a constitutively active form of the gene encoding MEK1 and assessed ERK2 activation by in vitro phosphorylation assay. Expression of the dominant-negative MEK1 inhibited platelet-derived growth factor (PDGF)-induced ERK2 activation, whereas expression of the constitutively active MEK1 induced ERK2 activation, suggesting that MEK1 is required and sufficient for ERK activation in these cells. Next, we assessed the effect of PD-98059, a synthetic MEK inhibitor, on PDGF-induced MEK1 and ERK activation. PD-98059 (10 microM) inhibited MEK1 and ERK activation, confirming that MEK1 is required for ERK activation in bovine tracheal myocytes. PD-98059 had no effect on Src or Raf-1 activity, evidence that PD-98059 is a specific inhibitor of MEK in this system. Finally, PD-98059 reduced PDGF-induced [(3)H]thymidine incorporation in a concentration-dependent manner, suggesting that catalytic activation of MEK1 and ERKs is required for DNA synthesis. We conclude that MEK1 is required for PDGF-induced ERK activation in bovine tracheal myocytes and that MEK1 and ERKs are required for PDGF-induced DNA synthesis in these cells.

Determination of absolute amounts of GDP and GTP bound to Ras in mammalian cells: comparison of parental and Ras-overproducing NIH 3T3 fibroblasts

We devised enzyme-based methods to measure fmol amounts of GDP and GTP and applied these methods to measure absolute amounts of Ras-bound GDP and GTP in NIH 3T3 fibroblasts. We found that parental NIH 3T3 cells contained 509 and 1.3 fmol of Ras-bound GDP and GTP, respectively, per mg of cellular protein and that stable transfectants of NIH 3T3 cells overexpressing wild-type Ha-Ras contained 7008 and 21.3 fmol of Ras-bound GDP and GTP, respectively, per mg of cellular protein; thus, in both cell types < 0.3% of Ras was in the active GTP-bound state. In contrast, NIH 3T3 cells overexpressing an activated form of Ha-Ras contained 5013 and 2049 fmol of Ras-bound GDP and GTP, respectively, per mg of protein, yielding 29% of Ras in the GTP-bound state. Since intracellular Ras is probably all in a guanine-nucleotide bound state, this method allows one to calculate the number of Ras molecules in each cell: parental NIH 3T3 cells and the Ha-Ras overproducing cells contain approximately 20,000 and approximately 275,000 Ras molecules per cell, respectively. We also incubated parental NIH 3T3 cells with 32PO4 and determined the radioactivity in Ras-bound GDP and GTP and the specific activity of cytosolic GDP and GTP; these experiments indicated that Ras-bound GTP may not be in equilibrium with the total cytosolic GTP pool.