Modulation of Decellularized Lacrimal Gland Hydrogel Biodegradation by Genipin Crosslinking

Purpose

Hydrogels derived from decellularized tissues are promising biomaterials in tissue engineering, but their rapid biodegradation can hinder in vitro cultivation. This study aimed to retard biodegradation of a hydrogel derived from porcine decellularized lacrimal glands (dLG-HG) by crosslinking with genipin to increase the mechanical stability without affecting the function and viability of lacrimal gland (LG)-associated cells.

Methods

The effect of different genipin concentrations on dLG-HG stiffness was measured rheologically. Cell-dependent biodegradation was quantified over 10 days, and the impact on matrix metalloproteinase (MMP) activity was quantified by gelatin and collagen zymography. The viability of LG epithelial cells (EpCs), mesenchymal stem cells (MSCs), and endothelial cells (ECs) cultured on genipin-crosslinked dLG-HG was assessed after 10 days, and EpC secretory activity was analyzed by β-hexosaminidase assay.

Results

The 0.5-mM genipin increased the stiffness of dLG-HG by about 46%, and concentrations > 0.25 mM caused delayed cell-dependent biodegradation and reduced MMP activity. The viability of EpCs, MSCs, and ECs was not affected by genipin concentrations of up to 0.5 mM after 10 days. Moreover, up to 0.5-mM genipin did not negatively affect EpC secretory activity compared to control groups.

Conclusions

A concentration of 0.5-mM genipin increased dLG-HG stiffness, and 0.25-mM genipin was sufficient to prevent MMP-dependent degradation. Importantly, concentrations of up to 0.5-mM genipin did not compromise the viability of LG-associated cells or the secretory activity of EpCs. Thus, crosslinking with genipin improves the properties of dLG-HG for use as a substrate in LG tissue engineering.

Enhancement of lacrimal gland cell function by decellularized lacrimal gland derived hydrogel

Sustainable treatment of aqueous deficient dry eye (ADDE) represents an unmet medical need and therefore requires new curative and regenerative approaches based on appropriatein vitromodels. Tissue specific hydrogels retain the individual biochemical composition of the extracellular matrix and thus promote the inherent cell´s physiological function. Hence, we created a decellularized lacrimal gland (LG) hydrogel (dLG-HG) meeting the requirements for a bioink as the basis of a LG model with potential forin vitroADDE studies. Varying hydrolysis durations were compared to obtain dLG-HG with best possible physical and ultrastructural properties while preserving the original biochemical composition. A particular focus was placed on dLG-HG´s impact on viability and functionality of LG associated cell types with relevance for a futurein vitromodel in comparison to the unspecific single component hydrogel collagen type-I (Col) and the common cell culture substrate Matrigel. Proliferation of LG epithelial cells (EpC), LG mesenchymal stem cells, and endothelial cells cultured on dLG-HG was enhanced compared to culture on Matrigel. Most importantly with respect to a functionalin vitromodel, the secretion capacity of EpC cultured on dLG-HG was higher than that of EpC cultured on Col or Matrigel. In addition to these promising cell related properties, a rapid matrix metalloproteinase-dependent biodegradation was observed, which on the one hand suggests a lively cell-matrix interaction, but on the other hand limits the cultivation period. Concluding, dLG-HG possesses decisive properties for the tissue engineering of a LGin vitromodel such as cytocompatibility and promotion of secretion, making it superior to unspecific cell culture substrates. However, deceleration of biodegradation should be addressed in future experiments.

Online Coupling of Size Exclusion Chromatography to Capillary Enhanced Raman Spectroscopy for the Analysis of Proteins and Biopharmaceutical Drug Products

The online coupling of size exclusion chromatography (SEC) to capillary enhanced Raman spectroscopy (CERS) based on a liquid core waveguide (LCW) flow cell was applied for the first time to assess the higher-order structure of different proteins. This setup allows recording of Raman spectra of the monomeric protein within complex mixtures, since SEC enables the separation of the monomeric protein from matrix components such as excipients of a biopharmaceutical product and higher molecular weight species (e.g., aggregates). The acquired Raman spectra were used for structural elucidation of well characterized proteins such as bovine serum albumin, hen egg white lysozyme, and β-lactoglobulin and of the monoclonal antibody rituximab in a medicinal product. Additionally, the CERS detection of the disaccharide sucrose, which is used as a stabilizing excipient, was quantified to achieve a limit of detection (LOD) of 120 μg and a limit of quantification (LOQ) of 363 μg injected on the column.

Rapid, label-free classification of glioblastoma differentiation status combining confocal Raman spectroscopy and machine learning

Label-free identification of tumor cells using spectroscopic assays has emerged as a technological innovation with a proven ability for rapid implementation in clinical care. Machine learning facilitates the optimization of processing and interpretation of extensive data, such as various spectroscopy data obtained from surgical samples. The here-described preclinical work investigates the potential of machine learning algorithms combining confocal Raman spectroscopy to distinguish non-differentiated glioblastoma cells and their respective isogenic differentiated phenotype by means of confocal ultra-rapid measurements. For this purpose, we measured and correlated modalities of 1146 intracellular single-point measurements and sustainingly clustered cell components to predict tumor stem cell existence. By further narrowing a few selected peaks, we found indicative evidence that using our computational imaging technology is a powerful approach to detect tumor stem cells in vitro with an accuracy of 91.7% in distinct cell compartments, mainly because of greater lipid content and putative different protein structures. We also demonstrate that the presented technology can overcome intra- and intertumoral cellular heterogeneity of our disease models, verifying the elevated physiological relevance of our applied disease modeling technology despite intracellular noise limitations for future translational evaluation.

Radiofluorination of an Anionic, Azide-Functionalized Teroligomer by Copper-Catalyzed Azide-Alkyne Cycloaddition

This study describes the synthesis, radiofluorination and purification of an anionic amphiphilic teroligomer developed as a stabilizer for siRNA-loaded calcium phosphate nanoparticles (CaP-NPs). As the stabilizing amphiphile accumulates on nanoparticle surfaces, the fluorine-18-labeled polymer should enable to track the distribution of the CaP-NPs in brain tumors by positron emission tomography after application by convection-enhanced delivery. At first, an unmodified teroligomer was synthesized with a number average molecular weight of 4550 ± 20 Da by free radical polymerization of a defined composition of methoxy-PEG-monomethacrylate, tetradecyl acrylate and maleic anhydride. Subsequent derivatization of anhydrides with azido-TEG-amine provided an azido-functionalized polymer precursor (o14PEGMA-N₃) for radiofluorination. The ¹⁸F-labeling was accomplished through the copper-catalyzed cycloaddition of o14PEGMA-N₃ with diethylene glycol-alkyne-substituted heteroaromatic prosthetic group [¹⁸F]2, which was synthesized with a radiochemical yield (RCY) of about 38% within 60 min using a radiosynthesis module. The ¹⁸F-labeled polymer [¹⁸F]fluoro-o14PEGMA was obtained after a short reaction time of 2-3 min by using CuSO₄/sodium ascorbate at 90 °C. Purification was performed by solid-phase extraction on an anion-exchange cartridge followed by size-exclusion chromatography to obtain [¹⁸F]fluoro-o14PEGMA with a high radiochemical purity and an RCY of about 15%.

Synergistic siRNA Loading of Extracellular Vesicles Enables Functional Delivery into Cells

RNA interference opened new approaches for disease treatment but safe and efficient cell delivery remains a bottleneck. Extracellular vesicles (EVs) are known to naturally shuttle RNA. Due to their potent cell internalization and low-cost scalability, milk-derived EVs in particular are considered promising RNA delivery systems. However, low drug loading currently impedes their use. Here, innovative exogenous loading strategies for small interfering RNA (siRNA) are explored and systematically compared regarding encapsulation efficiency, loading capacity, and loading concentration. Firstly, siRNA is pre-accumulated in liposomes or stabilized calcium phosphate nanoparticles (CaP-NP). The selected systems, which exhibited neutral or negative zeta potentials, are then applied for EV loading. Secondly, EVs are concentrated and applied to protocols known for liposome loading: dehydration-rehydration of vesicles, based on freeze-drying, and mixing by dual asymmetric centrifugation (DAC) after ultracentrifugation. Additionally, DAC after EV ultracentrifugation is combined with CaP-NP leading to a synergistic loading performance. The balance between energy input for siRNA loading and EV integrity is evaluated by monitoring the EV size, marker proteins, and morphology. For the EV-based siRNA formulation via DAC plus CaP-NP, EV properties are sufficiently maintained to protect the siRNA from degradation and deliver cell-death siRNA dose-dependently in Caco-2 cells.

Microtissues from mesenchymal stem cells and siRNA-loaded cross-linked gelatin microparticles for bone regeneration

The aim of this study was the evaluation of cross-linked gelatin microparticles (cGM) as substrates for osteogenic cell culture to assemble 3D microtissues and their use as delivery system for siRNA to cells in these assemblies.

In a 2D transwell cultivation system, we found that cGM are capable to accumulate calcium ions from the surrounding medium. Such a separation of cGM and SaOS-2 ​cells consequently led to a suppressed matrix mineral formation in the SaOS-2 culture on the well bottom of the transwell system. Thus, we decided to use cGM as component in 3D microtissues and get a close contact between calcium ion accumulating microparticles and cells to improve matrix mineralization.

Gelatin microparticles were cross-linked with a N,N-diethylethylenediamine-derivatized (DEED) maleic anhydride (MA) containing oligo (pentaerythritol diacrylate monostearate-co-N-isopropylacrylamide-co-MA) (oPNMA) and aggregated with SaOS-2 or human mesenchymal stem cells (hMSC) to microtissue spheroids. We systematically varied the content of cGM in microtissues and observed cell differentiation and tissue formation. Microtissues were characterized by gene expression, ALP activity and matrix mineralization. Mineralization was detectable in microtissues with SaOS-2 ​cells after 7 days and with hMSC after 24–28 days in osteogenic culture. When we transfected hMSC via cGM loaded with Lipofectamine complexed chordin siRNA, we found increased ALP activity and accelerated mineral formation in microtissues in presence of BMP-2. As a model for positive paracrine effects that indicate promising in vivo effects of these microtissues, we incubated pre-differentiated microtissues with freshly seeded hMSC monolayers and found improved mineral formation all over the well in the co-culture model. These findings may support the concept of microtissues from hMSC and siRNA-loaded cGM for bone regeneration.

Artificial Extracellular Matrices Containing Bioactive Glass Nanoparticles Promote Osteogenic Differentiation in Human Mesenchymal Stem Cells

The present study analyzes the capacity of collagen (coll)/sulfated glycosaminoglycan (sGAG)-based surface coatings containing bioactive glass nanoparticles (BGN) in promoting the osteogenic differentiation of human mesenchymal stroma cells (hMSC). Physicochemical characteristics of these coatings and their effects on proliferation and osteogenic differentiation of hMSC were investigated. BGN were stably incorporated into the artificial extracellular matrices (aECM). Oscillatory rheology showed predominantly elastic, gel-like properties of the coatings. The complex viscosity increased depending on the GAG component and was further elevated by adding BGN. BGN-containing aECM showed a release of silicon ions as well as an uptake of calcium ions. hMSC were able to proliferate on coll and coll/sGAG coatings, while cellular growth was delayed on aECM containing BGN. However, a stimulating effect of BGN on ALP activity and calcium deposition was shown. Furthermore, a synergistic effect of sGAG and BGN was found for some donors. Our findings demonstrated the promising potential of aECM and BGN combinations in promoting bone regeneration. Still, future work is required to further optimize the BGN/aECM combination for increasing its combined osteogenic effect.

Biodegradable macromers for implant bulk and surface engineering

Macromers, polymeric molecules with at least two functional groups for cross-polymerization, are interesting materials to tailor mechanical, biochemical and degradative bulk and surface properties of implants for tissue regeneration. In this review we focus on macromers with at least one biodegradable building block. Manifold design options, such as choice of polymeric block(s), optional core molecule and reactive groups, as well as cross-co-polymerization with suitable anchor or linker molecules, allow the adaptation of macromer-based biomaterials towards specific application requirements in both hard and soft tissue regeneration. Implants can be manufactured from macromers using additive manufacturing as well as molding and templating approaches. This review summarizes and discusses the overall concept of biodegradable macromers and recent approaches for macromer processing into implants as well as techniques for surface modification directed towards bone regeneration. These aspects are reviewed including a focus on the authors' contributions to the field through research within the collaborative research project Transregio 67.

Injectable oligomer-cross-linked gelatine hydrogels via anhydride-amine-conjugation

Injectable gelatine-based hydrogels are valuable tools for drug and cell delivery due to their extracellular matrix-like properties that can be adjusted by the degree of cross-linking. We have established anhydride-containing oligomers for the cross-linking of gelatine via anhydride-amine-conjugation. So far, this conversion required conditions not compatible with cell encapsulation or in vivo injection. In order to overcome this limitation, we developed an array of quarter-oligomers varying in comonomer composition and contents of reactive anhydride units reactive towards amine groups under physiological conditions. The oligomers were of low molecular weight (Mn < 5 kDa) with a high degree of chemically intact anhydrides. Chemical comonomer composition was determined by 1H-NMR. Dissolutions experiments confirmed improved hydrophilicity of the synthesized oligomers over our established compositions. Injectable formulations are described utilizing cytocompatible concentrations of constituent materials and proton-scavenging base. Degree of cross-linking and stiffness of injectable hydrogels were controlled by composition. The gels hold promise as injectable drug or cell carrier and as bioink.

A focus on critical aspects of uptake and transport of milk-derived extracellular vesicles across the Caco-2 intestinal barrier model

Bovine milk-derived extracellular vesicles (EVs) hold promises as oral drug delivery systems. Since EV bioavailability studies are difficult to compare, key factors regarding EV uptake and intestinal permeability remain little understood. This work aims to critically study uptake and transport properties of milk-derived EVs across the intestinal barrier in vitro by standardization approaches. Therefore, uptake properties were directly compared to liposomes in intestinal Caco-2 cells. Reliable staining results were obtained by the choice of three distinct EV labeling sites, while non-specific dye transfer and excess dye removal were carefully controlled. A novel fluorescence correction factor was implemented to account for different labeling efficiencies. Both EV and liposome uptake occurred mainly energy dependent with the neonatal Fc receptor (FcRn) providing an exclusive active pathway for EVs. Confocal microscopy revealed higher internalization of EVs whereas liposomes rather remained attached to the cell surface. Internalization could be improved when changing the liposomal formulation to resemble the EV lipid composition. In a Caco-2/HT29-MTX co-culture liposomes and EVs showed partial mucus penetration. For transport studies across Caco-2 monolayers we further established a standardized protocol considering the distinct requirements for EVs. Especially insert pore sizes were systematically compared with 3 µm inserts found obligatory. Obtained apparent permeability coefficients (P_app) reflecting the transport rate will allow for better comparison of future bioavailability testing.

Extrusion-Printing of Multi-Channeled Two-Component Hydrogel Constructs from Gelatinous Peptides and Anhydride-Containing Oligomers

The performance of artificial nerve guidance conduits (NGC) in peripheral nerve regeneration can be improved by providing structures with multiple small channels instead of a single wide lumen. 3D-printing is a strategy to access such multi-channeled structures in a defined and reproducible way. This study explores extrusion-based 3D-printing of two-component hydrogels from a single cartridge printhead into multi-channeled structures under aseptic conditions. The gels are based on a platform of synthetic, anhydride-containing oligomers for cross-linking of gelatinous peptides. Stable constructs with continuous small channels and a variety of footprints and sizes were successfully generated from formulations containing either an organic or inorganic gelation base. The adjustability of the system was investigated by varying the cross-linking oligomer and substituting the gelation bases controlling the cross-linking kinetics. Formulations with organic N-methyl-piperidin-3-ol and inorganic K₂HPO₄ yielded hydrogels with comparable properties after manual processing and extrusion-based 3D-printing. The slower reaction kinetics of formulations with K₂HPO₄ can be beneficial for extending the time frame for printing. The two-component hydrogels displayed both slow hydrolytic and activity-dependent enzymatic degradability. Together with satisfying in vitro cell proliferation data, these results indicate the suitability of our cross-linked hydrogels as multi-channeled NGC for enhanced peripheral nerve regeneration.

Sustained Calcium(II)-Release to Impart Bioactivity in Hybrid Glass Scaffolds for Bone Tissue Engineering

In this study, we integrated different calcium sources into sol-gel hybrid glass scaffolds with the aim of producing implants with long-lasting calcium release while maintaining mechanical strength of the implant. Calcium(II)-release was used to introduce bioactivity to the material and eventually support implant integration into a bone tissue defect. Tetraethyl orthosilicate (TEOS) derived silica sols were cross-linked with an ethoxysilylated 4-armed macromer, pentaerythritol ethoxylate and processed into macroporous scaffolds with defined pore structure by indirect rapid prototyping. Triethyl phosphate (TEP) was shown to function as silica sol solvent. In a first approach, we investigated the integration of 1 to 10% CaCl2 in order to test the hypothesis that small CaCl2 amounts can be physically entrapped and slowly released from hybrid glass scaffolds. With 5 and 10% CaCl2 we observed an extensive burst release, whereas slightly improved release profiles were found for lower Calcium(II) contents. In contrast, introduction of melt-derived bioactive 45S5 glass microparticles (BG-MP) into the hybrid glass scaffolds as another Calcium(II) source led to an approximately linear release of Calcium(II) in Tris(hydroxymethyl)aminomethane (TRIS) buffer over 12 weeks. pH increase caused by BG-MP could be controlled by their amount integrated into the scaffolds. Compression strength remained unchanged compared to scaffolds without BG-MP. In cell culture medium as well as in simulated body fluid, we observed a rapid formation of a carbonated hydroxyapatite layer on BG-MP containing scaffolds. However, this mineral layer consumed the released Calcium(II) ions and prevented an additional increase in Calcium(II) concentration in the cell culture medium. Cell culture studies on the different scaffolds with osteoblast-like SaOS-2 cells as well as bone marrow derived mesenchymal stem cells (hMSC) did not show any advantages concerning osteogenic differentiation due to the integration of BG-MP into the scaffolds. Nonetheless, via the formation of a hydroxyapatite layer and the ability to control the pH increase, we speculate that implant integration in vivo and bone regeneration may benefit from this concept.

A Versatile Macromer-Based Glycosaminoglycan (sHA3) Decorated Biomaterial for Pro-Osteogenic Scavenging of Wnt Antagonists

High serum levels of Wnt antagonists are known to be involved in delayed bone defect healing. Pharmaceutically active implant materials that can modulate the micromilieu of bone defects with regard to Wnt antagonists are therefore considered promising to support defect regeneration. In this study, we show the versatility of a macromer based biomaterial platform to systematically optimize covalent surface decoration with high-sulfated glycosaminoglycans (sHA3) for efficient scavenging of Wnt antagonist sclerostin. Film surfaces representing scaffold implants were cross-copolymerized from three-armed biodegradable macromers and glycidylmethacrylate and covalently decorated with various polyetheramine linkers. The impact of linker properties (size, branching) and density on sHA3 functionalization efficiency and scavenging capacities for sclerostin was tested. The copolymerized 2D system allowed for finding an optimal, cytocompatible formulation for sHA3 functionalization. On these optimized sHA3 decorated films, we showed efficient scavenging of Wnt antagonists DKK1 and sclerostin, whereas Wnt agonist Wnt3a remained in the medium of differentiating SaOS-2 and hMSC. Consequently, qualitative and quantitative analysis of hydroxyapatite staining as a measure for osteogenic differentiation revealed superior mineralization on sHA3 materials. In conclusion, we showed how our versatile material platform enables us to efficiently scavenge and inactivate Wnt antagonists from the osteogenic micromilieu. We consider this a promising approach to reduce the negative effects of Wnt antagonists in regeneration of bone defects via sHA3 decorated macromer based macroporous implants.

Scavenging of Dickkopf-1 by macromer-based biomaterials covalently decorated with sulfated hyaluronan displays pro-osteogenic effects

Dickkopf-1 (DKK1), a Wnt inhibitor secreted by bone marrow stromal cells (MSC), is known to play an important role in long-term non-union bone fracture defects and glucocorticoid induced osteoporosis. Mitigating its effects in early bone defects could improve osteogenesis and bone defect healing. Here, we applied a biomaterial strategy to deplete a defect environment from DKK1 by scavenging the protein via a macromer-based biomaterial covalently decorated with sulfated hyaluronan (sHA3). The material consisted of cross-copolymerized three-armed macromers with a small anchor molecule. Using the glycidyl anchor, polyetheramine (ED900) could be grafted to the material to which sHA3 was efficiently coupled in a separate step. For thorough investigation of material modification, flat material surfaces were generated by fabricating them on glass discs. The binding capability of sHA3 for DKK1 was demonstrated in this study by surface plasmon resonance measurements. Furthermore, the surfaces demonstrated the ability to scavenge and inactivate pathologic amounts of DKK1 from complex media. In a combinatory approach with Wnt3a, we were able to demonstrate that DKK1 is the preferred binding partner of our sHA3-functionalized surfaces. We validated our findings in a complex in vitro setting of differentiating SaOS-2 cells and primary hMSC. Here, endogenous DKK-1 was scavenged resulting in increased osteogenic differentiation indicating that this is a consistent biological effect irrespective of the model system used. Our study provides insights in the mechanisms and efficiency of sHA3 surface functionalization for DKK1 scavenging, which may be used in a clinical context in the future.

Increased pore size of scaffolds improves coating efficiency with sulfated hyaluronan and mineralization capacity of osteoblasts

Background

Delayed bone regeneration of fractures in osteoporosis patients or of critical-size bone defects after tumor resection are a major medical and socio-economic challenge. Therefore, the development of more effective and osteoinductive biomaterials is crucial.

Methods

We examined the osteogenic potential of macroporous scaffolds with varying pore sizes after biofunctionalization with a collagen/high-sulfated hyaluronan (sHA3) coating in vitro. The three-dimensional scaffolds were made up from a biodegradable three-armed lactic acid-based macromer (TriLA) by cross-polymerization. Templating with solid lipid particles that melt during fabrication generates a continuous pore network. Human mesenchymal stem cells (hMSC) cultivated on the functionalized scaffolds in vitro were investigated for cell viability, production of alkaline phosphatase (ALP) and bone matrix formation. Statistical analysis was performed using student’s t-test or two-way ANOVA.

Results

We succeeded in generating scaffolds that feature a significantly higher average pore size and a broader distribution of individual pore sizes (HiPo) by modifying composition and relative amount of lipid particles, macromer concentration and temperature for cross-polymerization during scaffold fabrication. Overall porosity was retained, while the scaffolds showed a 25% decrease in compressive modulus compared to the initial TriLA scaffolds with a lower pore size (LoPo). These HiPo scaffolds were more readily coated as shown by higher amounts of immobilized collagen (+ 44%) and sHA3 (+ 25%) compared to LoPo scaffolds. In vitro, culture of hMSCs on collagen and/or sHA3-coated HiPo scaffolds demonstrated unaltered cell viability. Furthermore, the production of ALP, an early marker of osteogenesis (+ 3-fold), and formation of new bone matrix (+ 2.5-fold) was enhanced by the functionalization with sHA3 of both scaffold types. Nevertheless, effects were more pronounced on HiPo scaffolds about 112%.

Conclusion

In summary, we showed that the improvement of scaffold pore sizes enhanced the coating efficiency with collagen and sHA3, which had a significant positive effect on bone formation markers, underlining the promise of using this material approach for in vivo studies.

Stabilization and Sterilization of Pericardial Scaffolds by Ultraviolet and Low-Energy Electron Irradiation

IMPACT STATEMENT

Pericardium-based tissue transplantation is a lifesaving treatment. Commercial glutaraldehyde-treated pericardial tissue exhibits cytotoxicity, which is associated with the accelerated graft failure. Replacement of glutaraldehyde has been suggested to overcome those drawbacks. In this study, we report a toxin-free method that combines tissue stabilization with a terminal sterilization. Our data indicate that the SULEEI procedure, which is part of an issued patent, may be a promising first step toward glutaraldehyde-free pericardium-based tissue transplants. Thus, our results may contribute to improving cardiovascular treatment strategies.

Dual-component collagenous peptide/reactive oligomer hydrogels as potential nerve guidance materials - from characterization to functionalization

Toward a new generation of improved nerve guidance conduits (NGCs), novel biomaterials are required to address pressing clinical shortcomings in peripheral nerve regeneration (PNR) and to promote biological performance. A dual-component hydrogel system formed by cross-linking reaction between maleic anhydride groups in an oligomeric building block for cross-linking of free amine functionalities in partially hydrolyzed collagen is formulated for continuous processing and NGC fabrication. The influence of the gelation base is optimized for processing from a double syringe delivery system with a static mixer. A hydrophilic low-concentrated base was introduced to control network formation and to utilize highly reactive macromers for gelation. Cross-linking extent and building block conversion were improved and homogenous monoliths were fabricated. Chemically derivatized hydrogels were obtained by conversion of a fraction of anhydride groups in the oligomeric precursor with monovalent primary amine-containing grafting molecules prior to gelation. Network stability in functionalized hydrogels was maintained and cationic moieties were implement to the gel that promoted in vitro cell attachment and spreading irrespective of mechanical stiffness. A molding strategy was introduced that allowed for fabrication of flexible tubular conduits in tunable dimensions and with chemically patterned structures. These hydrogel-based conduits hold promise for the next generation NGCs with integrated chemical cues for PNR.

Biodegradable and adjustable sol-gel glass based hybrid scaffolds from multi-armed oligomeric building blocks

Biodegradability is a crucial characteristic to improve the clinical potential of sol-gel-derived glass materials. To this end, a set of degradable organic/inorganic class II hybrids from a tetraethoxysilane(TEOS)-derived silica sol and oligovalent cross-linker oligomers containing oligo(d,l-lactide) domains was developed and characterized. A series of 18 oligomers (Mn: 1100-3200Da) with different degrees of ethoxylation and varying length of oligoester units was established and chemical composition was determined. Applicability of an established indirect rapid prototyping method enabled fabrication of a total of 85 different hybrid scaffold formulations from 3-isocyanatopropyltriethoxysilane-functionalized macromers. In vitro degradation was analyzed over 12months and a continuous linear weight loss (0.2-0.5wt%/d) combined with only moderate material swelling was detected which was controlled by oligo(lactide) content and matrix hydrophilicity. Compressive strength (2-30MPa) and compressive modulus (44-716MPa) were determined and total content, oligo(ethylene oxide) content, oligo(lactide) content and molecular weight of the oligomeric cross-linkers as well as material porosity were identified as the main factors determining hybrid mechanics. Cytocompatibility was assessed by cell culture experiments with human adipose tissue-derived stem cells (hASC). Cell migration into the entire scaffold pore network was indicated and continuous proliferation over 14days was found. ALP activity linearly increased over 2weeks indicating osteogenic differentiation. The presented glass-based hybrid concept with precisely adjustable material properties holds promise for regenerative purposes.

STATEMENT OF SIGNIFICANCE

Adaption of degradation kinetics toward physiological relevance is still an unmet challenge of (bio-)glass engineering. We therefore present a glass-derived hybrid material with adjustable degradation. A flexible design concept based on degradable multi-armed oligomers was combined with an established indirect rapid prototyping method to produce a systematic set of porous sol-gel-derived class II hybrid scaffolds. Mechanical properties in the range of cancellous bone were narrowly controlled by hybrid composition. The oligoester introduction resulted in significantly increased compressive moduli. Cytocompatible hybrids degraded in physiologically relevant time frames and a promising linear and controllable weight loss profile was found. To our knowledge, our degradation study represents the most extensive long-term investigation of sol-gel-derived class II hybrids. Due to the broad adjustability of material properties, our concept offers potential for engineering of biodegradable hybrid materials for versatile applications.

Dual-Component Gelatinous Peptide/Reactive Oligomer Formulations as Conduit Material and Luminal Filler for Peripheral Nerve Regeneration

Toward the next generation of nerve guidance conduits (NGCs), novel biomaterials and functionalization concepts are required to address clinical demands in peripheral nerve regeneration (PNR). As a biological polymer with bioactive motifs, gelatinous peptides are promising building blocks. In combination with an anhydride-containing oligomer, a dual-component hydrogel system (cGEL) was established. First, hollow cGEL tubes were fabricated by a continuous dosing and templating process. Conduits were characterized concerning their mechanical strength, in vitro and in vivo degradation and biocompatibility. Second, cGEL was reformulated as injectable shear thinning filler for established NGCs, here tyrosine-derived polycarbonate-based braided conduits. Thereby, the formulation contained the small molecule LM11A-31. The biofunctionalized cGEL filler was assessed regarding building block integration, mechanical properties, in vitro cytotoxicity, and growth permissive effects on human adipose tissue-derived stem cells. A positive in vitro evaluation motivated further application of the filler material in a sciatic nerve defect. Compared to the empty conduit and pristine cGEL, the functionalization performed superior, though the autologous nerve graft remains the gold standard. In conclusion, LM11A-31 functionalized cGEL filler with extracellular matrix (ECM)-like characteristics and specific biochemical cues holds great potential to support PNR.

Surface modification of copolymerized films from three-armed biodegradable macromers - An analytical platform for modified tissue engineering scaffolds

The concept of macromers allows for a broad adjustment of biomaterial properties by macromer chemistry or copolymerization. Copolymerization strategies can also be used to introduce reactive sites for subsequent surface modification. Control over surface features enables adjustment of cellular reactions with regard to site and object of implantation. We designed macromer-derived polymer films which function as non-implantable analytical substrates for the investigation of surface properties of equally composed scaffolds for bone tissue engineering. To this end, a toolbox of nine different biodegradable, three-armed macromers was thermally cross-copolymerized with poly(ethylene glycol)-methacrylate (PEG-MA) to films. Subsequent activation of PEG-hydroxyl groups with succinic anhydride and N-hydroxysuccinimid allowed for covalent surface modification. We quantified the capacity to immobilize analytes of low (amino-functionalized fluorescent dye, Fcad, and RGD-peptides) and high (alkaline phosphatase, ALP) molecular weight. Fcad grafting level was controlled by macromer chemistry, content and molecular weight of PEG-MA, but also the solvent used for film synthesis. Fcad molar amount per surface area was twentyfive times higher on high-swelling compared to low-swelling films, but differences became smaller when large ALP (appr. 2:1) were employed. Similarly, small differences were observed on RGD peptide functionalized films that were investigated by cell adhesion studies. Presentation of PEG-derivatives on surfaces was visualized by atomic force microscopy (AFM) which unraveled composition-dependent domain formation influencing fluorescent dye immobilization. Surface wetting characteristics were investigated via static water contact angle. We conclude that macromer ethoxylation and lactic acid content determined film swelling, PEG domain formation and eventually efficiency of surface decoration.

STATEMENT OF SIGNIFICANCE

Surfaces of implantable biomaterials are the site of interaction with a host tissue. Accordingly, modifications in the composition of the surface will determine cellular response towards the material which is crucial for the success of innovations and control of tissue regeneration. We employed a macromer approach which is most flexible for the design of biomaterials with a broad spectrum of physicochemical characteristics. For ideal analytical accessibility of the material platform, we cross-copolymerized films on solid supports. Films allowed for the covalent immobilization of fluorescent labels, peptides and enzymes and thorough analytical characterization revealed that macromer hydrophilicity is the most relevant design parameter for surface analyte presentation in these materials. All analytical results were combined in a model describing PEG linker domain formation and ligand presentation.

Dual-Functional Hydrazide-Reactive and Anhydride-Containing Oligomeric Hydrogel Building Blocks

Biomimetic hydrogels are advanced biomaterials that have been developed following different synthetic routes. Covalent postfabrication functionalization is a promising strategy to achieve efficient matrix modification decoupled of general material properties. To this end, dual-functional macromers were synthesized by free radical polymerization of maleic anhydride with diacetone acrylamide (N-(1,1-dimethyl-3-oxobutyl)acrylamide) and pentaerythritol diacrylate monostearate. Amphiphilic oligomers (M_n < 7.5 kDa) with anhydride contents of 7-20% offered cross-linking reactivity to yield rigid hydrogels with gelatinous peptides (E = 4-13 kPa) and good cell adhesion properties. Mildly reactive methyl ketones as second functionality remained intact during hydrogel formation and potential of covalent matrix modification was shown using hydrazide and hydrazine model compounds. Successful secondary dihydrazide cross-linking was demonstrated by an increase of hydrogel stiffness (>40%). Efficient hydrazide/hydrazine immobilization depending on solution pH, hydrogel ketone content as well as ligand concentration for bioconjugation was shown and reversibility of hydrazone formation was indicated by physiologically relevant hydrazide release over 7 days. Proof-of-concept experiments with hydrazido-functionalized hyaluronan demonstrated potential for covalent aECM immobilization. The presented dual-functional macromers have perspective as reactive hydrogel building blocks for various biomedical applications.

Melanocytes from the outer root sheath of human hair and epidermal melanocytes display improved melanotic features in the niche provided by cGEL, oligomer-cross-linked gelatin-based hydrogel

Non-invasively based cell treatments of depigmented skin disorders are largely limited by means of cell sampling as much as by their routes of application. Human melanocytes cultivated from the outer root sheath of hair follicle (HUMORS) are among the cell types that fit the non-invasive concept by being cultivated out of a minimal sample: hair root. Eventual implementation of HUMORS as a graft essentially depends on a choice of suitable biocompatible, biodegradable carrier that would mechanically and biologically support the cells as transient niche and facilitate their engraftment. Hence, the melanotic features of follicle-derived HUMORS and normal human epidermal melanocytes (NHEM) in engineered scaffolds based on collagen, the usual leading candidate for graft material for a variety of skin transplantation procedures were tested. Hydrogel named cGEL, an enzymatically degraded bovine gelatin chemically cross-linked with an oligomeric copolymer synthesized from pentaerythritol diacrylate monostearate (PEDAS), maleic anhydride (MA), and N-isopropylacrylamide (NiPAAm) or diacetone acrylamide (DAAm), was used. The cGEL provided a friendly three-dimensional (3D) cultivation environment for human melanocytes with increased melanin content of the 3D cultures in comparison to Collagen Cell Carrier^® (CCC), a commercially available bovine decellularized collagen membrane, and electrospun polycaprolactone (PCL) matrices. One of the cGEL variants fostered not only a dramatic increase in melanin production but also a significant enhancement of melanotic gene PAX3, PMEL, TYR, and MITF expression in comparison to that of both CCC full-length collagen and PCL scaffolds, providing a clearly superior melanocyte niche that may be a suitable candidate for grafting carriers. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 3115-3126, 2016.

Rat Osteosarcoma Cells as a Therapeutic Target Model for Osteoregeneration via Sclerostin Knockdown

There are various conceptually different strategies to improve bone regeneration and to treat osteoporosis, each with distinct inherent advantages and disadvantages. The use of RNA interference strategies to suppress the biological action of catabolic factors or antagonists of osteogenic proteins is promising, and such strategies can be applied locally. They are comparably inexpensive and do not suffer from stability problems as protein-based approaches. In this study, we focus on sclerostin, encoded by the SOST gene, a key regulator of bone formation and remodeling. Sclerostin is expressed by mature osteocytes but also by late osteogenically differentiated cells. Thus, it is difficult and requires long-term cultures to investigate the effects of SOST silencing on the expression of osteogenic markers using primary cells. We, therefore, selected a rat osteosarcoma cell line, UMR-106, that has been shown to express SOST and secrete sclerostin in a comparable fashion as late osteoblasts and osteocytes. We investigated the effects of differentiating supplements on SOST expression and sclerostin secretion in UMR-106 cells and found that addition of 100 ng/ml of bone morphogenetic protein (BMP)-2 strongly induced sclerostin secretion, whereas dexamethasone inhibited secretion. Effects of silencing SOST in UMR-106 cells cultured in various differentiation media including BMP-2 and/or dexamethasone were determined next with the aim to find promising test conditions for a readout system for the evaluation of future small interfering RNA release formulations for local induction of bone formation. We found a direct correlation between attenuated SOST expression and an increase in the osteogenic potential of UMR-106 cells. The combination of SOST silencing and BMP-2 could synergistically improve osteogenic factors. A lowered proliferation rate in silenced groups may indicate a faster switch to differentiation.

Indirect rapid prototyping of sol-gel hybrid glass scaffolds for bone regeneration - Effects of organic crosslinker valence, content and molecular weight on mechanical properties

We present a series of organic/inorganic hybrid sol-gel derived glasses, made from a tetraethoxysilane-derived silica sol (100% SiO2) and oligovalent organic crosslinkers functionalized with 3-isocyanatopropyltriethoxysilane. The material was susceptible to heat sterilization. The hybrids were processed into pore-interconnected scaffolds by an indirect rapid prototyping method, described here for the first time for sol-gel glass materials. A large panel of polyethylene oxide-derived 2- to 4-armed crosslinkers of molecular weights ranging between 170 and 8000Da were incorporated and their effect on scaffold mechanical properties was investigated. By multiple linear regression, 'organic content' and the 'content of ethylene oxide units in the hybrid' were identified as the main factors that determined compressive strength and modulus, respectively. In general, 3- and 4-armed crosslinkers performed better than linear molecules. Compression tests and cell culture experiments with osteoblast-like SaOS-2 cells showed that macroporous scaffolds can be produced with compressive strengths of up to 33±2MPa and with a pore structure that allows cells to grow deep into the scaffolds and form mineral deposits. Compressive moduli between 27±7MPa and 568±98MPa were obtained depending on the hybrid composition and problems associated with the inherent brittleness of sol-gel glass materials could be overcome. SaOS-2 cells showed cytocompatibility on hybrid glass scaffolds and mineral accumulation started as early as day 7. On day 14, we also found mineral accumulation on control hybrid glass scaffolds without cells, indicating a positive effect of the hybrid glass on mineral accumulation.

STATEMENT OF SIGNIFICANCE

We produced a hybrid sol-gel glass material with significantly improved mechanical properties towards an application in bone regeneration and processed the material into macroporous scaffolds of controlled architecture by indirect rapid prototyping. We were able to produce macroporous materials of relevant porosity and pore size with compressive moduli, covering the range reported for cancellous bone while an even higher compressive strength was maintained. By multiple linear regression, we identified crosslinker parameters, namely organic content and the content of ethylene oxide units in the hybrids that predominantly determined the mechanics of the hybrid materials. The scaffolds proved to be cytocompatible and induced mineralization in SaOS-2 cells. This provides new insight on the critical parameters for the design of the organic components of covalent hybrid sol-gel glasses.

Multi-Functional Macromers for Hydrogel Design in Biomedical Engineering and Regenerative Medicine

Contemporary biomaterials are expected to provide tailored mechanical, biological and structural cues to encapsulated or invading cells in regenerative applications. In addition, the degradative properties of the material also have to be adjustable to the desired application. Oligo- or polymeric building blocks that can be further cross-linked into hydrogel networks, here addressed as macromers, appear as the prime option to assemble gels with the necessary degrees of freedom in the adjustment of the mentioned key parameters. Recent developments in the design of multi-functional macromers with two or more chemically different types of functionalities are summarized and discussed in this review illustrating recent trends in the development of advanced hydrogel building blocks for regenerative applications.

Highly adjustable biomaterial networks from three-armed biodegradable macromers

Biocompatible material platforms with adjustable properties and option for chemical modification are warranted for site-specific biomedical applications. To this end, three-armed biodegradable macromers of well-defined chemical characteristics were prepared from trivalent alcohols with different degrees of ethoxylation and different lengths of oligoester domains. A platform of 15 different macromers was established. The macromers were designed to exhibit different hydrophilicities and molecular weights and contained various types of oligoesters such as d,l-lactide, l-lactide and ε-caprolactone. Macromers chemical composition was determined and molecular weights ranged from 900 to 3000 Da. Thermally induced cross-linking of methacrylated macromers was monitored by oscillation rheology. A novel variant of the solid lipid templating technique was established to fabricate macroporous tissue engineering scaffolds from these macromers. Scaffold properties were thoroughly investigated regarding mechanical properties, compositional analysis including methacrylic double bond conversion, microstructure and porosity. Material properties could be controlled by macromer chemistry. By variation of the fabrication procedure and processing parameters scaffold porosity was increased up to 88%. Basic cytocompatibility was assessed including indirect and direct contact methods. The established macromers hold promise for various biomedical purposes.

STATEMENT OF SIGNIFICANCE

Specific biomedical applications require tailored biomaterials with defined properties. We established a macromer platform for preparation of tissue engineering scaffolds with adjustable chemical and mechanical characteristics. Macromers were composed of trivalent core alcohols with different degrees of ethoxylation to which biodegradable domains - lactide or ε-caprolactone - were oligomerized before final methacrylation. The solid lipid templating technique was adapted to fabricate macroporous scaffolds with controlled pore structure and porosity from the developed macromers, which can also be processed by solid freeform fabrication techniques. The material platform relies on clinically established chemistries of the biodegradable domains and the macromer concept enables the fabrication of networks in which cross-polymerization kinetics, mechanical properties and surface hydrophobicity is predefined by macromer chemistry. Cytocompatibility was confirmed by indirect and direct cell contact experiments.

Co(II)-mediated effects of plain and plasma immersion ion implanted cobalt-chromium alloys on the osteogenic differentiation of human mesenchymal stem cells

Medical CoCr is one of the main alloys used for metal-on-metal prosthesis in patients with total hip arthroplasty. CoCr surfaces modified by nitrogen plasma immersion ion implantation (PIII) are characterized by improved wear resistance but also showed increased Co(II) ion release under in vitro conditions. For the first time, CoCr modified by nitrogen PIII was evaluated with regard to its effect on the osteogenic differentiation of MSC. The activity of alkaline phosphatase, the expression of the osteogenic genes Runt-related transcription factor 2, osteopontin as well as integrin-binding bone sialoprotein and the production of osteocalcin and hydroxyapatite were determined. The results of our study demonstrate that Co(II) ions released from the alloy affected the osteogenic differentiation of MSC. Distinct differences in differentiation markers were found between pristine and modified alloys for osteocalcin but not for integrin-binding sialoprotein and hydroxyapatite. Interestingly, osteopontin was upregulated in naive and differentiated MSC by Co(II) ions and modified CoCr, likely through the induction of a cellular hypoxic response. The findings of this study contribute to a better understanding of possible risk factors with regard to a clinical applicability of surface modified CoCr implant materials.

Gelatin-based biomaterial engineering with anhydride-containing oligomeric cross-linkers

Chemically cross-linked gelatin hydrogels are versatile cell-adhesive hydrogel materials that have been established for a variety of biomedical applications. The most prominent cross-linker is glutaraldehyde, which, however, has been described to cause compatibility problems and loss of microscopic but relevant structural features. A recently developed oligomeric cross-linker that contains anhydride functionalities was evaluated as cross-linker for the fabrication of gelatin-based hydrogels and microparticles. In a fast curing reaction, hydrogels composed of gelatin and oligomeric cross-linker were fabricated with good conversion over a wide concentration range of constituents and with cross-linkers of different anhydride contents. Hydrogel properties, such as dry weight and mechanics, could be controlled by hydrogel composition and rheological properties correlated to elastic moduli from 1 to 10 kPa. The gels were shown to be cytocompatible and promoted cell adhesion. In soft formulations, cells migrated into the hydrogel bulk. Gelatin microparticles prepared by a standard water-in-oil emulsion technique were also treated with the novel oligomers, and cross-linking degrees matching those obtained with glutaraldehyde were obtained. At the same time, fewer interparticular cross-links were observed. Fluorescein-derivatized cross-linkers yielded labeled microparticles in a concentration-dependent manner. The oligomeric cross-linkers are presented as an efficient and possibly more functional and compatible alternative to glutaraldehyde. The engineered hydrogel materials hold potential for various biomedical applications.

Matrix metalloproteinase 9 (MMP-9) mediated release of MMP-9 resistant stromal cell-derived factor 1α (SDF-1α) from surface modified polymer films

Preparation of smart materials by coatings of established surfaces with biomolecules will lead to the next generation of functionalized biomaterials. Rejection of implants is still a major problem in medical applications but masking the implant material with protein coatings is a promising approach. These layers not only disguise the material but also equip it with a certain biological function. The anti-inflammatory chemokine stromal cell-derived factor 1α (SDF-1α) is well suited to take over this function, because it efficiently attracts stem cells and promotes their differentiation and proliferation. At least the initial stem cell homing requires the formation of a concentration gradient. Thus, a reliable and robust release mechanism of SDF-1α from the material is essential. Several proteases, most notably matrix metalloproteinases, are upregulated during inflammation, which, in principle, can be exploited for a tightly controlled release of SDF-1α. Herein, we present the covalent immobilization of M-[S4V]-SDF-1α on novel biodegradable polymer films, which consist of heterobifunctional poly(ethylene glycol) and oligolactide-based functionalized macromers. A peptidic linker with a trimeric matrix metalloproteinase 9 (MMP-9) cleavage site (MCS) was used as connection and the linkage between the three components was achieved by combination of expressed protein ligation and Cu(I) catalyzed azide/alkyne cycloaddition. The MCS was used for MMP-9 mediated release of M-[S4V]-SDF-1α from the biomaterial and the released SDF-1α derivative was biologically active and induced strong cell migration, which demonstrates the great potential of this system.

In-line monitoring of particle size in a fluid bed granulator: investigations concerning positioning and configuration of the sensor

According to the ICH Q8 guideline, analytic technologies (PAT) are important tools for characterization and optimization of pharmaceutical manufacturing processes. Particle size as a critical quality attribute for granules is therefore an important parameter that should be monitored during the fluid bed granulation process. This work focusses on optimizing position and configuration of an SFT-sensor for the in-line measurement of particle size distribution in a Glatt GPCG 3 fluid bed granulator. As model-substances, different grades of microcrystalline cellulose were used. The in-line measured particle size and particle rate in the sensor were evaluated. A sensor position in the deceleration zone of the granulator was found to be promising for in-line particle size measurement. Most reliable data were generated in this position when the probe was placed in a distance of 11cm from the chamber wall to avoid bias by the inlet air stream. No major influence of rotation angle of the probe was found in this position. Furthermore, an entire fluid bed granulation process was successfully monitored with the sensor installed in the optimized setting.

Gene silencing of chordin improves BMP-2 effects on osteogenic differentiation of human adipose tissue-derived stromal cells

Although bone morphogenic protein (BMP)-2 is known to potently induce osteogenic differentiation of human mesenchymal stem cells, strong individual differences have been reported. In part, this is due to internal antagonists of BMP-2 for example, noggin and chordin, secreted by differentiating cells. This enabling study was performed to prove the hypothesis that osteogenic effects of BMP-2 can be improved by transient nonviral gene silencing of chordin. We investigated the effect of siRNA against chordin on osteogenic differentiation in human adipose tissue-derived stromal cells (hASC). Cells of two different donors were isolated after liposuction and proliferated for passage 4 or 5. On seeding, hASCs were transfected with siRNA using a commercial liposomal transfection reagent. Subsequently, cells were differentiated in the presence or absence of BMP-2 (100 ng/mL). Noncoding siRNA as well as siRNA against noggin served as a control. Osteogenic differentiation of hASC was determined by alkaline phosphase (ALP) activity and matrix mineralization. ALP activity of hASC treated with siRNA against chordin was increased for cells of both donors. In contrast, silencing of noggin had no effect in any of the donors. In combination with BMP-2, silencing of either chordin or noggin showed strongly improved ALP activity compared with the control group that was also supplemented with BMP-2. Mineralization was observed to start earlier in groups that received siRNA against chordin or noggin and showed increased amounts of incorporated calcium on day 15 compared with the control groups. Silencing chordin in hASCs was successful to increase BMP-2 effects on osteogenic differentiation in both donors, while effects of noggin silencing were reliably observed only in one of the two investigated donors. In contrast to noggin silencing, chordin silencing also increased osteogenic differentiation without supplemented BMP-2.

The pore size of PLGA bone implants determines the de novo formation of bone tissue in tibial head defects in rats

PURPOSE

The influence of the pore size of biodegradable poly(lactic-co-glycolic acid) scaffolds on bone regeneration was investigated.

METHODS

Cylindrical poly(lactic-co-glycolic acid) scaffolds were implanted into a defect in the tibial head of rats. Pore sizes of 100-300, 300-500, and 500-710 μm were tested and compared to untreated defects as control. Two and four weeks after implantation, the specimens were explanted and defect regeneration and de novo extracellular matrix generation were investigated by MRI, quantitative solid-state NMR, and mass spectrometry.

RESULTS

The pore size of the scaffolds had a pronounced influence on the quantity of the extracellular matrix synthesized in the graft; most collagen was synthesized within the first 2 weeks of implantation, while the amount of hydroxyapatite increased in the second 2 weeks. After 4 weeks, the scaffolds contained large quantities of newly formed lamellar bone while the control defects were filled by inhomogenous woven bone. Best results were obtained for scaffolds of a pore size of 300-500 μm.

CONCLUSION

Our analysis showed that the structure and dynamics of the regenerated extracellular matrix was very similar to that of the native bone, suggesting that biomineralization was significantly enhanced by the choice of the most appropriate implant material.

Open porous microscaffolds for cellular and tissue engineering by lipid templating

Porous microspheres fabricated from biodegradable polymers have great potential as microscaffolds in tissue engineering applications, especially for novel strategies such as microtissue fabrication in vitro and microtissue assembly in vivo. Fabrication techniques for microparticulate scaffolds with surface and bulk pore sizes relevant for effective cell intrusion, however, are scarce. This study presents two techniques for the fabrication of open porous microscaffolds from poly(lactide-co-glycolide) in which lipid templating is used for pore formation and combined with either dispersion spraying or a double emulsion technique to determine the size and shape of the particulate structures generated. Both techniques yield microscaffolds with an average size of between 500 and 800 μm, high bulk porosities and open surface pores larger than 50 μm in diameter. Microscaffold morphology was investigated microscopically, particle size distribution was determined and porosity was quantified by intrusion measurements. Particle size and morphology was controlled by the processing parameters and the content and type of lipid porogen. Efficient extraction of the lipid template was shown by thermal analysis. Microscaffold cytocompatibility and in vitro cell culture performance was evaluated with L929 fibroblasts and rat adipose-derived stromal cells (ADSC), respectively. Extracts of different formulations were cytocompatible. Rat ADSC proliferated on the microscaffolds and were differentiated along the adipogenic lineage.

Synthesis and characterization of dual stimuli responsive macromers based on poly(N-isopropylacrylamide) and poly(vinylphosphonic acid)

Stimulus responsive materials hold great promise in biological applications as they can react to changes in physiological stimuli to produce a desired effect. Stimulus responsive macromers designed to respond to temperature changes at or around 37 degrees C and the presence of divalent cations were synthesized from N-isopropylacrylamide, pentaerythritol diacrylate monostearate, 2-hydroxyethyl acrylate, and vinylphosphonic acid by free radical polymerization. Monomers were incorporated into the macromers in ratios approximating the molar feed ratios, and macromers underwent thermogelation around normal body temperature (36.2-40.5 degrees C) as determined by rheology and differential scanning calorimetry. Macromers containing vinylphosphonic acid interacted with calcium ions in solution, displaying decreased sol-gel transition temperatures (27.6-34.4 degrees C in 100 mM CaCl(2)), with decreases of greater magnitude observed for macromers with higher relative vinylphosphonic acid content. Critical micellar concentrations also decreased in a dose-dependent manner with increased vinylphosphonic acid incorporation in solutions with CaCl(2) but not in solutions with NaCl. These dually responsive macromers allow examination of the effect of increasing vinylphosphonic acid content in a macromer, which holds promise in biological applications such as drug and cell delivery or tissue engineering due to the macromer responsiveness at physiological temperatures and concentrations of calcium.

Altering amine basicities in biodegradable branched polycationic polymers for nonviral gene delivery

In this work, biodegradable branched polycationic polymers were synthesized by Michael addition polymerization from different amine monomers and the triacrylate monomer trimethylolpropane triacrylate. The polymers varied in the number of amines that dissociate in different pH ranges, which are considered to be beneficial to different parts of the gene delivery process. P-DED, a polymer synthesized from trimethylolpropane triacrylate and dimethylethylenediamine, had the highest number of protonated amines that are available for plasmid DNA (pDNA) complexation at pH 7.4 of all polymers synthesized. P-DED formed a positive polyplex (13.9 +/- 0.5 mV) at a polymer/pDNA weight ratio of 10:1 in contrast with the other polymers synthesized, which formed positive polyplexes only at higher weight ratios. Polyplexes formed with the synthesized polymers at the highest polymer/pDNA weight ratio tested (300:1) resulted in higher transfection with enhanced green fluorescent protein reporter gene (5.3 +/- 1.0 to 30.6 +/- 6.6%) compared with naked pDNA (0.8 +/- 0.4%), as quantified by flow cytometry. Polyplexes formed with P-DED (weight ratio of 300:1) also showed higher transfection (30.6 +/- 6.6%) as compared with polyplexes formed with branched polyethylenimine (weight ratio of 2:1, 25.5 +/- 2.7%). The results from this study demonstrated that polymers with amines that dissociate above pH 7.4, which are available as positively charged groups for pDNA complexation at pH 7.4, can be synthesized to produce stable polyplexes with increased zeta potential and decreased hydrodynamic size that efficiently transfect cells. This work indicated that polymers containing varying amine functionalities with different buffering capabilities can be synthesized by using different amine monomers and used as effective gene delivery vectors.

Biodegradable branched polycationic polymers with varying hydrophilic spacers for nonviral gene delivery

Biodegradable branched polycationic polymers with varying hydrophilic spacer lengths were synthesized from different triacrylate monomers and the amine monomer 1-(2-aminoethyl)piperazine by Michael addition polymerization. The hydrophilic spacers were varied by the number of ethyleneoxy groups in the triacrylate monomer (E/M) that ranged from 0 to 14. The polymer degradation depended on the spacer length and pH; the amount of ester degraded as determined by (1)H NMR after 14 days was 43.4 +/- 2.1% (pH 5.0) and 89.7 +/- 1.3% (pH 7.4) for the polymer with 0 E/M compared to 55.7 +/- 2.6% (pH 5.0) and 98.5 +/- 1.6% (pH 7.4) for the polymer with 14 E/M. Cell viability of rat fibroblasts after exposure to polymer solutions of concentrations up to 1000 microg/mL remained high (above 66.9 +/- 12.1% compared to below 7.6 +/- 1.1% for polyethylenimine at a concentration of 50 microg/mL or higher) and increased with the spacer length. The polyplexes made with all the synthesized polymers showed higher transfection efficiency (4.5 +/- 1.7% to 9.4 +/- 2.0%, dependent on the polymer/pDNA weight ratio) with an enhanced green fluorescent protein reporter gene compared to naked pDNA (0.8 +/- 0.4%) as quantified by flow cytometry. This study demonstrates that hydrophilic spacers can be incorporated into polycationic polymers to reduce their cytotoxicity and enhance their degradability for nonviral gene delivery.

Cytocompatibility evaluation of amphiphilic, thermally responsive and chemically crosslinkable macromers for in situ forming hydrogels

The cytocompatibility of amphiphilic, thermoresponsive and chemically crosslinkable macromers was examined in vitro. Macromers synthesized from pentaerythritol diacrylate monostearate, N-isopropylacrylamide, acrylamide and hydroxyethyl acrylate in different molar ratios and with varying molecular weights and lower critical solution temperatures were evaluated for cytocompatibility with rat fibroblasts. Cell viabilities of over 60% for all and over 80% for most formulations were observed after 24-h incubation with macromers with molecular weights in the range of approximately 1500-3000 Da. The chemical modification of the macromers with a (meth)acrylate group was shown to have a time- and dose-dependent effect on cell viability. Uncrosslinked macromers with lower degrees of (meth)acrylation allowed for cell viability of over 60% for up to 6 h. (Meth)acrylated macromers with lower critical solution temperature (LCST) closer to physiological temperature allowed for higher cell viabilities as opposed to those with lower LCST. The data suggest that when the (meth)acrylated macromers are assembled into a physical gel, their cytotoxicity is diminished. After gel phase separation, cytotoxicity increased. This study gives information on the parameters that enable viable cell encapsulation for in situ forming hydrogel systems.

Synthesis and characterization of injectable, thermally and chemically gelable, amphiphilic poly(N-isopropylacrylamide)-based macromers

In this study, we synthesized and characterized a series of macromers based on poly( N-isopropylacrylamide) that undergo thermally induced physical gelation and, following chemical modification, can be chemically cross-linked. Macromers with number average molecular weights typically ranging from 2000-3500 Da were synthesized via free radical polymerization from, in addition to N-isopropylacrylamide, pentaerythritol diacrylate monostearate, a bifunctional monomer containing a long hydrophobic chain, acrylamide, a hydrophilic monomer, and hydroxyethyl acrylate, a hydrophilic monomer used to provide hydroxyl groups for further chemical modification. Results indicated that the hydrophobic-hydrophilic balance achieved by varying the relative concentrations of comonomers used during synthesis was an important parameter in controlling the transition temperature of the macromers in solution and stability of the resultant gels. Storage moduli of the macromers increased over 4 orders of magnitude once gelation occurred above the transition temperature. Furthermore, chemical cross-linking of these macromers resulted in gels with increased stability compared to uncross-linked controls. These results demonstrate the feasibility of synthesizing poly( N-isopropylacrylamide)-based macromers that undergo tandem gelation and establish key criteria relating to the transition temperature and stability of these materials. The data suggest that these materials may be attractive substrates for tissue engineering and cellular delivery applications as the combination of mechanistically independent gelation techniques used in tandem may offer superior materials with regard to gelation kinetics and stability.

Effect of macromer molecular weight on in vitro ophthalmic drug release from photo-crosslinked matrices

The objective of this study was to investigate the effect of poly(propylene fumarate) (PPF) molecular weight on the release kinetics of two ophthalmic model drugs, acetazolamide (AZ) and timolol maleate (TM), from matrices prepared by photo-induced copolymerization of PPF with N-vinyl pyrrolidone (NVP). PPF macromers of different number average molecular weight (M(n)) and polydispersity index (PI) were used in the experiments. Photo-crosslinked matrices were loaded with 5wt.% AZ or TM. The amounts of released drug and NVP were determined using high-performance liquid chromatography (HPLC). The release kinetics of both drugs was influenced by the molecular weight of the constituent PPF macromer. An increased M(n) led to an increased burst release and an accelerated drug release. Dependent on the PPF M(n), the initial AZ loading was released within periods ranging from 35 days (M(n) = 3670, PI = 1.9) to 220 days (M(n) = 2050, PI=1.5). TM-loaded matrices revealed similar release kinetics dependent on the PPF M(n). The amount of released NVP from photo-crosslinked matrices during the course of a release experiment was independent of the PPF M(n) for both drugs. Matrix swelling and erosion were determined gravimetrically. The network structures of non-loaded matrices were further characterized by determining their crosslinking densities and the relative double bond conversions of fumaric acid (FAA) and NVP. Independent of PPF M(n), PPF and NVP similarly participated in the formation of the PPF/polyNVP copolymer network. The observed differences in drug release might therefore be explained by differences in the microstructural organization of the copolymer networks. Overall, the results demonstrate that drug release kinetics from photo-crosslinked PPF/polyNVP matrices is strongly dependent on the M(n) of the PPF macromer.

Injectable,in situ forming poly(propylene fumarate)-based ocular drug delivery systems

This study sought to develop an injectable formulation for long-term ocular delivery of fluocinolone acetonide (FA) by dissolving the anti-inflammatory drug and the biodegradable polymer poly(propylene fumarate) (PPF) in the biocompatible, water-miscible, organic solvent N-methyl-2-pyrrolidone (NMP). Upon injection of the solution into an aqueous environment, a FA-loaded PPF matrix is precipitated in situ through the diffusion/extraction of NMP into surrounding aqueous fluids. Fabrication of the matrices and in vitro release studies were performed in phosphate buffered saline at 37 degrees C. Drug loadings up to 5% were achieved. High performance liquid chromatography was employed to determine the released amount of FA. The effects of drug loading, PPF content of the injectable formulation, and additional photo-crosslinking of the matrix surface were investigated. Overall, FA release was sustained in vitro over up to 400 days. After an initial burst release of 22 to 68% of initial FA loading, controlled drug release driven by diffusion and bulk erosion was observed. Drug release rates in a therapeutic range were demonstrated. Release kinetics were found to be dependent on drug loading, formulation PPF content, and extent of surface crosslinking. The results suggest that injectable, in situ formed PPF matrices are promising candidates for the formulation of long-term, controlled delivery devices for intraocular drug delivery.