Chronic excessive alcohol consumption diagnosis: comparison between traditional biomarkers and ethyl glucuronide in hair, a study on a real population

BACKGROUND

The study aimed to evaluate the diagnostic sensitivity (SE) and specificity (SP) of chronic alcohol misuse diagnosis by comparing traditional biomarkers with ethyl glucuronide (EtG), an ethanol direct metabolite, detected in the keratinic matrix.

METHODS

Seventy-six subjects tested for chronic alcohol abuse for different purposes were recruited. EtG was detected in hair, whereas the analyses of carbohydrate-deficient transferrin (CDT), alanine transaminase, aspartate transaminase, gamma-glutamyl transferase, mean corpuscular volume, and mean corpuscular hemoglobin were performed in serum samples.

RESULTS

Of the 76 patients examined, 26 were judged by the medical doctors as subjects with alcohol abuse problems and, therefore, not eligible for driving license renewal or liver transplant. EtG in hair (SE = 0.68, SP = 1.00) showed the best diagnostic SE and SP compared with the other biomarkers investigated. Among the traditional biomarkers, only CDT proved to be suitable for forensic purposes because of the high diagnostic specificity (SP = 1.00) although it showed poor diagnostic SE (0.27). The percentage of positive samples decreased for all the biomarkers by excluding the subjects with hepatic diseases, except for EtG and CDT, suggesting that these 2 biomarkers could be less affected by false positive results, because of hepatic diseases.

CONCLUSIONS

This study showed that when EtG in hair and CDT results are combined, diagnostic SE in chronic alcohol abuse diagnosis clearly improved, suggesting that complementary analysis of both these biomarkers provides the best diagnostic tool in suspected cases of chronic excessive alcohol consumption.

Determination of perfluorooctanoic acid and perfluorooctanesulfonate in human tissues by liquid chromatography/single quadrupole mass spectrometry

A method is described that permits the measurement of the levels of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) in human liver, kidney, adipose tissue, brain, basal ganglia, hypophysis, thyroid, gonads, pancreas, lung, skeletal muscle and blood, even in subjects not occupationally exposed to these compounds. The purification of samples involved the use of trifunctional (tC18) and strong anion-exchange (SAX) solid-phase extraction cartridges, and the analysis utilized a high-performance liquid chromatograph coupled to a single quadrupole mass spectrometer (LC/MS). The analyses were conducted on a mixed-bed reversed-phase column by gradient runs using 3 mM ammonium acetate/methanol mixtures at different proportions as the mobile phase. The detector was used in electrospray negative ion mode by recording simultaneously the ions m/z 413.0 (PFOA) and 499.0 (PFOS). Perfluorononanoic acid (PFNA), added to the samples before the purification, was used as the internal standard (ion monitored = m/z 463.6). The recovery rates of the extraction procedure ranged from 79.6 to 95.6% (CV% 1.7-7.4%) for PFOA, from 79.7 to 100.8% (CV% = 1.2-7.1) for PFOS, and from 89.1 to 102.3% (CV% = 0.9-5.2 %) for PFNA. The calibration curves were linear up to at least 400 ng of analytes per gram of tissue. The detection limits (signal-to-noise ratio = 3) were 0.1 ng/g for both PFOA and PFOS measured in all tissues except adipose tissue, where the limits were about 0.2 ng/g. The content of analytes in tissues varied from 0.3 to 3.8 ng/g (respectively: basal ganglia and lung) for PFOA, and from 1.0 to 13.6 ng/g (respectively: skeletal muscle and liver) for the linear isomer of PFOS. The method is suitable to evaluate the content of PFOA and PFOS in different tissues taken from the general population exposed to very low concentrations of these pollutants.

Comparison between two orthodontic skeletal anchorage devices: osseointegrated implants and miniscrews - Medical-Legal Considerations

The object of this article is to describe potential medical-legal problems concerning the use of miniscrews as orthodontic skeletal anchorage. The miniscrews, which are already used in rigid fixation, do not need either a healing period before loading, or complete osseo-integration as do implants. Their particular shape allows high primary stability and they can be placed in the sub-periosteal region. The dimensions of these miniscrews are minute, with dimensions of only 4-5 mm in length. They penetrate only slightly deeper than the cortical layer and therefore notably reduce the risk of lesions to roots, nerves, or maxillary sinus, when compared to other skeletal anchorage systems such as implants. The use of the miniscrew in oral surgery or periodontology does not need specific insurance coverage in contrast to the insertion of implants. Accordingly, orthodontic therapy completed by the dentist with orthopaedic microscrews as anchorage could also be included in a general civil insurance policy for orthodontics.

Radiographic evaluation of teeth subjected to high temperatures: experimental study to aid identification processes

The radiographic evaluation of dental remains represents a significant aspect in the forensic identification process, particularly after an exposure to fire. The aim of this "in vitro" study was to evaluate the radiographic features of unrestored, endodontically treated and restored teeth after exposure to an experimental range of high temperatures. Ninety human teeth were divided into two groups: (1) unrestored teeth, as a control group and (2) teeth endodontically treated (condensation technique) and restored with amalgam or composite fillings. Before testing the high temperatures, periapical radiographs of all teeth were performed. The tests of exposure to heat were carried out in an oven for six different temperatures (200, 400, 600, 800, 1000 and 1100 degrees C (392, 752, 1112, 1472, 1832, 2012 degrees F)). After each exposure, periapical radiographs of all the teeth were taken. The radiographic appearance of all the teeth before and after the thermal stresses were evaluated and the differences were recorded. The results of the radiographic examination showed that a number of significant radiographic details were conserved: the composite fillings were in place maintaining the shape till 600 degrees C (1112 degrees F), the amalgam fillings were in place maintaining the shape till 1000 degrees C (1832 degrees F) and the endodontic treatments were recognisable till 1100 degrees C (2012 degrees F).

Observations on dental structures when placed in contact with acids: experimental studies to aid identification processes

In a "mafia" crime case, a magistrate asked us whether it is possible to destroy a cadaver by immersing it in acids, and would it be possible to identify any residues. The aim of this study was to observe the behavior of teeth exposed to four kinds of acid solutions. The teeth were placed in plastic containers with 25 mL of acid and observed. The experiences showed that teeth are completely dissolved after 14 h of immersion in 37% solution of hydrochloric acid, while at 90h in 96% sulfuric acid, the destruction of the samples is still incomplete. In nitric acid the teeth undergo a complete dissolution in 12 h, and in 17 h in aqua regia (chloroazotic acid-hydrochloric/nitric acid 1:3). It was possible to recognize the characteristic morphological features of dental tissues and structures up until the advanced stages of degradation.

Further study of restored and un-restored teeth subjected to high temperatures

Forensic dentistry has been shown to be of fundamental importance in medico-legal investigations aimed at identifying human remains involving high temperature incidents because dental remains and prosthetic devices are resistant to quite high thermal change. In this project we studied teeth containing class I and V amalgam and composite fillings and compared them to un-restored teeth when exposed to high temperatures. Twenty five un-restored teeth, 25 teeth with class I amalgam restorations, 25 teeth with class V amalgam restorations and 25 teeth with class I composite fillings were placed in a furnace and heated at a rate of 30 degrees C/min. The effects at the predetermined temperatures 200, 400, 600, 800, 1000 and 1100 degrees C were examined macroscopically and then observed microscopically by means of a stereomicroscope. Our observations showed that the class I amalgam restorations at the different temperature levels remained in place, maintaining their shape despite disintegration of the crowns, whilst the class I composite restorations remained in place but in an altered shape. Comparing restored with un-restored teeth we observed different responses in crown disintegration at the different temperature levels.

[De Quervain's tenosynovitis and work with hand tools: a case study]

Work-related musculoskeletal disorders of the upper limbs are a frequent complaint and their pathogenetic mechanism is often related to mechanical overload of the body region involved without traumatic events. The occupational origin of such disorders is much debated, since the clinical pictures are often not specific and may be found in subjects who do not perform hazardous work tasks. A better understanding of the relationship between clinical symptoms, diagnosis, and functional capacity would provide a deeper knowledge in decision making for return to work and rehabilitation strategies. In this paper we present a case study of a worker using scissors who developed De Quervain's syndrome in the dominant hand. A methodology for the biomechanical investigation of the work task and the possible occupational aetiology of the clinical picture are discussed according to the findings of the specific literature.

Observations on dental prostheses and restorations subjected to high temperatures: experimental studies to aid identification processes

In large scale disasters associated with fire the damage caused by heat can make medico-legal identification of human remains difficult. Teeth, restorations and prostheses, all of which are resistant to even quite high temperatures can be used as aids in the identification process. In this project the behaviour and morphology of teeth and dental prostheses exposed to a range of high temperatures was studied. Healthy teeth, dental restorations and prostheses were placed in a furnace and heated at a rate of 30 degrees C/min and the effects of the predetermined temperatures 200, 400, 600, 800, 1000 and 1100 degrees C were examined by stereomicroscopy and scanning electron microscopy (SEM). Our observations show that some prostheses and restorative materials resist higher temperatures than theoretically predictable and that even when a restoration is lost because of detachment or change of state its ante-mortem presence can be confirmed and detected by both stereomicroscopic examination and SEM of the residual cavity. We further conclude that a reasonably reliable estimation of the temperature of exposure can be made from an analysis of the teeth and restorative materials.

Fluorescent technique for macroscopic detection of electrical metallization

A fluorescence method for the detection of trace metals was investigated to visualize in situ latent current marks or electrical metallic traces on cloth. The main electrodes metallization (iron, copper, zinc, aluminum, nickel, chromium, and brass) can be identified by spraying a 0.2% solution of 8-hydroxyquinoline in ethanol followed by observation under shortwave UV light. Advantages and disadvantages of this technique are compared with previously described methods.

The macroscopic detection of metallization in the latent current mark

Immediate revelation of latent current mark (LCM) was investigated by means of macroscopic detection of metallization (M). LCM were produced on corpses using electrodes of metals most frequently involved in electrocution (iron, copper, zinc, aluminium, chrome, nickel, and brass). Also, current marks of accidental electrocutions (10 cases) were examined. Single metals can be identified by spraying specific reagents on the suspected skin. The following multiple systems can be used to simultaneously produce the above mentioned metals: A. Sequence: 10% ammonium sulphid--H2O--0.2% solochrome cyanine in 1% HCl. B. Sequence: 0.5% 2.nitroso.1.naphtol in acetone--H2O--0.2% solochrome cyanine in 1% HCl. Instead of appearing on the skin, metallization can sometimes be found on clothes or shoes. Macroscopic search for LCM metallization is a very simple method and it is recommended in both certain and suspected electrocution, as well as in cases of sudden, unexpected death, particularly during work.