Linearly Interlinked Fe-Nx-Fe Single Atoms Catalyze High-Rate Sodium-Sulfur Batteries

Linearly interlinked single atoms offer unprecedented physiochemical properties, but their synthesis for practical applications still poses significant challenges. Herein, linearly interlinked iron single-atom catalysts that are loaded onto interconnected carbon channels as cathodic sulfur hosts for room-temperature sodium-sulfur batteries are presented. The interlinked iron single-atom exhibits unique metallic iron bonds that facilitate the transfer of electrons to the sulfur cathode, thereby accelerating the reaction kinetics. Additionally, the columnated and interlinked carbon channels ensure rapid Na+ diffusion kinetics to support high-rate battery reactions. By combining the iron atomic chains and the topological carbon channels, the resulting sulfur cathodes demonstrate effective high-rate conversion performance while maintaining excellent stability. Remarkably, even after 5000 cycles at a current density of 10 A g-1, the Na-S battery retains a capacity of 325 mAh g-1. This work can open a new avenue in the design of catalysts and carbon ionic channels, paving the way to achieve sustainable and high-performance energy devices.

Understanding the charge transfer effects of single atoms for boosting the performance of Na-S batteries

The effective flow of electrons through bulk electrodes is crucial for achieving high-performance batteries, although the poor conductivity of homocyclic sulfur molecules results in high barriers against the passage of electrons through electrode structures. This phenomenon causes incomplete reactions and the formation of metastable products. To enhance the performance of the electrode, it is important to place substitutable electrification units to accelerate the cleavage of sulfur molecules and increase the selectivity of stable products during charging and discharging. Herein, we develop a single-atom-charging strategy to address the electron transport issues in bulk sulfur electrodes. The establishment of the synergistic interaction between the adsorption model and electronic transfer helps us achieve a high level of selectivity towards the desirable short-chain sodium polysulfides during the practical battery test. These finding indicates that the atomic manganese sites have an enhanced ability to capture and donate electrons. Additionally, the charge transfer process facilitates the rearrangement of sodium ions, thereby accelerating the kinetics of the sodium ions through the electrostatic force. These combined effects improve pathway selectivity and conversion to stable products during the redox process, leading to superior electrochemical performance for room temperature sodium-sulfur batteries.

Polymetal-Chelated Fabrication of Bimetallic Nanophosphides as Electrocatalysts for Zinc-Air Batteries

Bimetallic phosphides are considered as promising electrocatalysts for zinc-air batteries toward oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). To address the semi-conductor inherent low electronic conductivity and catalytic activity, a polymetal-chelated strategy is employed to in situ fabricate bimetallic nanophosphides within carbon matrix anchoring by chemical bonding. The employment of biomolecule polydopamine (PDA) efficiently anchors various transition metal ions due to its strong chelating capability via inherent functional groups. Furthermore, the chelation of multi-metal ion is proved to promote the formation of graphitic nitrogen. The bimetallic FexCoyP phosphides nanoparticles are intimately encapsulated in carbon matrix through in situ carbonization and phosphatization processes. When utilized in Zinc-air batteries, Fe0.20Co0.80P anchored within N, P co-doped sub-microsphere (Fe0.20Co0.80P /PNC) exhibit a maximum power density of 167 mW cm-2 and cycle life up to 270 cycles, with a round-trip voltage of 0.955 V. The mechanisms for catalytic activity passivation are ascribed to the etching of nitrogen and oxidation of phosphorus in carbon matrix, as well as the oxidation of the surface phosphide on the sub-microspheres. This study presents a promising candidate for advancing the further development of energy conversation catalysis.

Low-Overpotential Rechargeable Na-CO2 Batteries Enabled by an Oxygen-Vacancy-Rich Cobalt Oxide Catalyst

Rechargeable sodium-carbon dioxide (Na-CO2) batteries have been proposed as a promising CO2 utilization technique, which could realize CO2 reduction and generate electricity at the same time. They suffer, however, from several daunting problems, including sluggish CO2 reduction and evolution kinetics, large polarization, and poor cycling stability. In this study, a rambutan-like Co3O4 hollow sphere catalyst with abundant oxygen vacancies was synthesized and employed as an air cathode for Na-CO2 batteries. Density functional theory calculations reveal that the abundant oxygen vacancies on Co3O4 possess superior CO2 binding capability, accelerating CO2 electroreduction, and thereby improving the discharge capacity. In addition, the oxygen vacancies also contribute to decrease the CO2 decomposition free energy barrier, which is beneficial for reducing the overpotential further and improving round-trip efficiency. Benefiting from the excellent catalytic ability of rambutan-like Co3O4 hollow spheres with abundant oxygen vacancies, the fabricated Na-CO2 batteries exhibit extraordinary electrochemical performance with a large discharge capacity of 8371.3 mA h g-1, a small overpotential of 1.53 V at a current density of 50 mA g-1, and good cycling stability over 85 cycles. These results provide new insights into the rational design of air cathode catalysts to accelerate practical applications of rechargeable Na-CO2 batteries and potentially Na-air batteries.

Tunable Gas Admission via a "Molecular Trapdoor" Mechanism in a Flexible Cationic Metal-Organic Framework Featuring 1D Channels

Achieving high gas selectivity is challenging when dealing with gas pairs of similar size and physiochemical properties. The "molecular trapdoor" mechanism discovered in zeolites holds promise for highly selective gas adsorption separation but faces limitations like constrained pore volume and slow adsorption kinetics. To address these challenges, for the first time, a flexible metal-organic framework (MOF) featuring 1D channels and functioning as a "molecular trapdoor" material is intoduced. Extra-framework anions act as "gate-keeping" groups at the narrowest points of channels, permitting gas admissions via gate opening induced by thermal/pressure stimuli and guest interactions. Different guest molecules induce varied energy barriers for anion movement, enabling gas separation based on distinct threshold temperatures for gas admission. The flexible framework of Pytpy MOFs, featuring swelling structure with rotatable pyridine rings, facilitates faster gas adsorption than zeolite. Analyzing anion properties of Pytpy MOFs reveals a guiding principle for selecting anions to tailor threshold gas admission. This study not only overcomes the kinetic limitations related to gas admission in the "molecular trapdoor" zeolites but also underscores the potential of developing MOFs as molecular trapdoor adsorbents, providing valuable insights for designing ionic MOFs tailored to diverse gas separation applications.

Synergistic Effect of Co-Mo Pinning in Lay-Structured Oxide Cathode for Enhancing Stability toward Potassium-Ion Batteries

Owing to the high economic efficiency and energy density potential, manganese-based layer-structured oxides have attracted great interests as cathode materials for potassium ion batteries. In order to alleviate the continuous phase transition and K+ re-embedding from Jahn-Teller distortion, the [Mn-Co-Mo]O6 octahedra are introduced into P3-K0.45 MnO2 herein to optimize the local electron structure. Based on the experimental and computational results, the octahedral center metal molybdenum in [MoO6 ] octahedra proposes a smaller ionic radius and higher oxidation state to induce second-order JTE (pseudo-JTE) distortion in the adjacent [MnO6 ] octahedra. This distortion compresses the [MnO6 ] octahedra along the c-axis, leading to an increased interlayer spacing in the K+ layer. Meanwhile, the Mn3+ /Mn4+ is balanced by [CoO6 ] octahedra and the K+ diffusion pathway is optimized as well. The proposed P3-K0.45 Mn0.9 Co0.05 Mo0.05 O2 cathode material shows an enhanced cycling stability and rate performance. It demonstrates a high capacity of 80.2 mAh g-1 at 100 mAh g-1 and 77.3 mAh g-1 at 500 mAh g-1 . Furthermore, it showcases a 2000 cycles stability with a 59.6% capacity retention. This work presents a promising solution to the challenges faced by manganese-based layered oxide cathodes and offers a deep mechanism understanding and improved electrochemical performance.

In Situ Molecular Engineering Strategy to Construct Hierarchical MoS2 Double-Layer Nanotubes for Ultralong Lifespan "Rocking-Chair" Aqueous Zinc-Ion Batteries

Rechargeable aqueous zinc ion batteries (AZIBs) have gained considerable attention owing to their low cost and high safety, but dendrite growth, low plating/stripping efficiency, surface passivation, and self-erosion of the Zn metal anode are hindering their application. Herein, a one-step in situ molecular engineering strategy for the simultaneous construction of hierarchical MoS2 double-layer nanotubes (MoS2-DLTs) with expanded layer-spacing, oxygen doping, structural defects, and an abundant 1T-phase is proposed, which are designed as an intercalation-type anode for "rocking-chair" AZIBs, avoiding the Zn anode issues and therefore displaying a long cycling life. Benefiting from the structural optimization and molecular engineering, the Zn2+ diffusion efficiency and interface reaction kinetics of MoS2-DLTs are enhanced. When coupled with a homemade ZnMn2O4 cathode, the assembled MoS2-DLTs//ZnMn2O4 full battery exhibited impressive cycling stability with a capacity retention of 86.6% over 10 000 cycles under 1 A g-1anode, outperforming most of the reported "rocking-chair" AZIBs. The Zn2+/H+ cointercalation mechanism of MoS2-DLTs is investigated by synchrotron in situ powder X-ray diffraction and multiple ex situ characterizations. This research demonstrates the feasibility of MoS2 for Zn-storage anodes that can be used to construct reliable aqueous full batteries.

Developing high-power Li||S batteries via transition metal/carbon nanocomposite electrocatalyst engineering

The activity of electrocatalysts for the sulfur reduction reaction (SRR) can be represented using volcano plots, which describe specific thermodynamic trends. However, a kinetic trend that describes the SRR at high current rates is not yet available, limiting our understanding of kinetics variations and hindering the development of high-power Li||S batteries. Here, using Le Chatelier's principle as a guideline, we establish an SRR kinetic trend that correlates polysulfide concentrations with kinetic currents. Synchrotron X-ray adsorption spectroscopy measurements and molecular orbital computations reveal the role of orbital occupancy in transition metal-based catalysts in determining polysulfide concentrations and thus SRR kinetic predictions. Using the kinetic trend, we design a nanocomposite electrocatalyst that comprises a carbon material and CoZn clusters. When the electrocatalyst is used in a sulfur-based positive electrode (5 mg cm-2 of S loading), the corresponding Li||S coin cell (with an electrolyte:S mass ratio of 4.8) can be cycled for 1,000 cycles at 8 C (that is, 13.4 A gS-1, based on the mass of sulfur) and 25 °C. This cell demonstrates a discharge capacity retention of about 75% (final discharge capacity of 500 mAh gS-1) corresponding to an initial specific power of 26,120 W kgS-1 and specific energy of 1,306 Wh kgS-1.

Enhanced oxidase-mimic constructed by luminescent carbon dots loaded on MIL-53(Fe)-NO2 for dual-mode detection of gallic acid and biothiols in food and humans

Monitoring of gallic acid (GA) in food and biothiols in humans is crucial for body health. Nanozyme-mediated colorimetric strategy for evaluating them has been widely applied nowadays, however, the inferior efficient and susceptible single-signal recognition limit its further application. Herein, a sensitive biosensor was first constructed for bimodal detection of GA and biothiols based on CDs@MIL-53(Fe)-NO2, prepared through a facile and time-saving microwave treatment. Benefiting from the excellent fluorescent and electron transfer properties of CDs, CDs@MIL-53(Fe)-NO2 exhibited significant enhanced blue fluorescence and oxidase-like activity, which could oxide colorless 3,3',5,5'-tetramethylbenzidine without H2O2, and the blue product could quench the fluorescence of composite. The dual-mode assay based on such bifunctional nanozyme showed an extremely sensitivity towards GA/l-cysteine/homocysteine with the detection limit of 62/65/124 nM and 17/16/27 nM in colorimetric/fluorescent modes, respectively. The practicability in real samples and portability based on a smartphone of the analysis has been investigated with reliable results.

[Clinical study of the Cobb+1 to Cobb fusion strategy for Lenke 5C adolescent idiopathic scoliosis patients with the lower lumbar apex]

Objective: To investigate the indications and surgical outcome of Cobb+1 to Cobb fusion strategy in Lenke 5C adolescent idiopathic scoliosis (AIS) patients with the lower lumbar apex. Methods: The clinical data of Lenke 5C AIS patients treated in Nanjing Drum Tower Hospital from August 2015 to December 2018 were retrospectively analyzed. The patients were followed-up for at least 2 years after surgery and treated with selective Cobb+1 to Cobb fusion strategy. The patients were divided into the normal lumbar apex group (apex location of the main curve was between T12 and L1) and the lower lumbar apex group (apex location of the main curve was below the disc of L1/L2). The occurrence of proximal decompensation in the two groups was compared. In addition, according to whether the patients had proximal decompensation at the last follow-up, the patients in the lower lumbar apex group were further divided into proximal decompensation group and non-decompensation group. The radiographic parameters and Scoliosis Research Society-22 (SRS-22) scores of the two groups were compared. Results: A total of 52 patients (19 cases in the normal lumbar apex group and 33 cases in the lower lumbar apex group), aged (15.3±1.6) years, were followed up for 2-5 (3.2±1.2) years. Six patients (6/19) in the normal lumbar apex group and 5 cases (15.2%) in the lower lumbar apex group showed proximal decompensation during follow-up, and the incidence was significantly higher in the normal lumbar apex group (P=0.034). Within the lower lumbar apex group, the patients with proximal decompensation (n=5) showed similar Risser grade, baseline thoracic Cobb angle, and main Cobb angle as those without proximal decompensation(n=28), and the differences were all not statistically significant (all P>0.05). However, the baseline thoracic/lumbar apical vertebra translation (AVT) ratio was significantly larger in patients with proximal decompensation (0.6±0.2 vs 0.4±0.2, P=0.042), but the postoperative upper instrumented vertebra (UIV) tilt angle was similar (4.5°±2.3° vs 6.2°±3.4°, P=0.312). Conclusion: Cobb+1 to Cobb fusion strategy, selecting UIV at 1 level above upper end vertebra (UEV), could be performed in Lenke 5C patients with the lower lumbar apex location. In addition, UIV could be selected at UEV+1 in patients with small baseline thoracic curve.

[The clinical application value of brain 18F-FDG PET/CT in the diagnostics of Parkinsonian syndromes]

Objective: To analyze the PET/CT imaging features of fluoride 18F-fluorodeoxyglucose (18F-FDG) in patients with various types of Parkinson's syndrome (PS), and to establish a "diagnostic tree" model of 18F-FDG PET/CT for PS. Methods: Data of patients with Parkinson's disease (PD), patients with multiple system atrophy cerebellar type (MSA-C), and patients with multiple system atrophy Parkinson's type (MSA-P)admitted to the Neurology Department of Huashan Hospital affiliated to Fudan University from January 2019 to December 2021. 18F-FDG PET/CT examination was conducted in all patients. Clinical and follow-up data was collected to determine clinical diagnosis. The specific patterns of brain glucose metabolism in patients with various types of Parkinsonism were observed and their utility in the differential diagnosis of the disease was analyzed. 18F-FDG PET/CT imaging"diagnostic tree"model was established and its value in the differential diagnosis of Parkinsonism was verified. Results: A total of 320 patients, 187 males and 133 females, aged (62±9) years, were enrolled in our study, including 80 PD, 90 PSP, 114 MSA-C and 36 MSA-P patients. The differential diagnostic features of cerebral glucose metabolism of Parkinsonism were as follows: the metabolism of putamen increased in PD patients, the metabolism of caudate nucleus, thalamus, midbrain, and frontal lobe decreased in PSP patients, the metabolism of cerebellum decreased in MSA-C patients, and the metabolism of putamen and cerebellum decreased in MSA-P patients. The sensitivity and specificity of the"diagnostic tree"model are 88.75% and 91.25% for PD diagnosis, 54.44% and 96.96% for PSP diagnosis, 87.72% and 86.41% for MSA-C diagnosis, and 55.56% and 91.55% for MSA-P diagnosis, respectively. It could correctly classify 75%(240/320) of patients. Conclusions: Characteristic metabolism patterns of brain in 18F-FDG PET/CT imaging is significant for the differential diagnosis of PD, PSP, MSA-C and MSA-P. The"diagnostic tree"model is valuable for clinical diagnosis.

Effect of PD-L1 Expression for the PD-1/L1 Inhibitors on Non-small Cell Lung Cancer: A Meta-analysis Based on Randomised Controlled Trials

AIMS

As PD-L1 expression has been proposed as one of the cancer biomarkers for non-small cell lung cancer (NSCLC), the predictive value of tumour proportional score (TPS) in the effect of immunotherapy [programmed death protein-1/ligand 1 (PD-1/L1) inhibitors] for NSCLC is worth exploring further. Here, we aimed to summarise the outcomes of current NSCLC randomised controlled trials (RCTs) and explore the predictive value of TPS in clinical immunotherapy, including immune checkpoint inhibitors (ICIs) with or without chemotherapy.

MATERIALS AND METHODS

RCTs published by PubMed, Medline, Embase and Scopus before February 2023 comparing immunotherapy (PD-1/L1 with or without other therapy) versus a control group in advanced or metastatic NSCLC were included to assess the prognosis according to the patients' TPS with 1% and 50% as the thresholds. The primary endpoints were overall survival and progression-free survival.

RESULTS

In total, 28 RCTs containing 17 266 participants with advanced or metastatic NSCLC were included in this meta-analysis. Statistical results showed that compared with TPS <1%, ≥1% or within 1-49%, patients with TPS ≥50% benefited more significantly from the immunotherapy. A subgroup analysis showed that when TPS was <1%, ≥1% or within 1-49%, ICIs + chemotherapy had better efficacy than ICIs alone; PD-1 (such as pembrolizumab) inhibitors had better efficacy than PD-L1 inhibitors (such as atezolizumab).

CONCLUSION

The efficacy of immunotherapy (PD-1/L1 inhibitors) for advanced or metastatic NSCLC is influenced by TPS.

Soft-Rigid Heterostructures with Functional Cation Vacancies for Fast-Charging and High-Capacity Sodium Storage

Optimizing charge transfer and alleviating volume expansion in electrode materials are critical to maximize electrochemical performance for energy-storage systems. Herein, an atomically thin soft-rigid Co9 S8 @MoS2 core-shell heterostructure with dual cation vacancies at the atomic interface is constructed as a promising anode for high-performance sodium-ion batteries. The dual cation vacancies involving VCo and VMo in the heterostructure and the soft MoS2 shell afford ionic pathways for rapid charge transfer, as well as the rigid Co9 S8 core acting as the dominant active component and resisting structural deformation during charge-discharge. Electrochemical testing and theoretical calculations demonstrate both excellent Na+ -transfer kinetics and pseudocapacitive behavior. Consequently, the soft-rigid heterostructure delivers extraordinary sodium-storage performance (389.7 mA h g-1 after 500 cycles at 5.0 A g-1 ), superior to those of the single-phase counterparts: the assembled Na3 V2 (PO4 )3 ||d-Co9 S8 @MoS2 /S-Gr full cell achieves an energy density of 235.5 Wh kg-1 at 0.5 C. This finding opens up a unique strategy of soft-rigid heterostructure and broadens the horizons of material design in energy storage and conversion.

Regulating adsorption performance of zeolites by pre-activation in electric fields

While multiple external stimuli (e.g., temperature, light, pressure) have been reported to regulate gas adsorption, limited studies have been conducted on controlling molecular admission in nanopores through the application of electric fields (E-field). Here we show gas adsorption capacity and selectivity in zeolite molecular sieves can be regulated by an external E-field. Through E-field pre-activation during degassing, several zeolites exhibited enhanced CO2 adsorption and decreased CH4 and N2 adsorptions, improving the CO2/CH4 and CO2/N2 separation selectivity by at least 25%. The enhanced separation performance of the zeolites pre-activated by E-field was maintained in multiple adsorption/desorption cycles. Powder X-ray diffraction analysis and ab initio computational studies revealed that the cation relocation and framework expansion induced by the E-field accounted for the changes in gas adsorption capacities. These findings demonstrate a regulation approach to sharpen the molecular sieving capability by E-fields and open new avenues for carbon capture and molecular separations.

Ultrastable Cu-Based Dual-Channel Heterowire for the Switchable Electro-/Photocatalytic Reduction of CO2

Catalytic conversion of CO2 into high value-added chemicals using renewable energy is an attractive strategy for the management of CO2 . However, achieving both efficiency and product selectivity remains a great challenge. Herein, a brand-new family of 1D dual-channel heterowires, Cu NWs@MOFs are constructed by coating metal-organic frameworks (MOFs) on Cu nanowires (Cu NWs) for electro-/photocatalytic CO2 reductions, where Cu NWs act as an electron channel to directionally transmit electrons, and the MOF cover acts as a molecule/photon channel to control the products and/or undertake photoelectric conversion. Through changing the type of MOF cover, the 1D heterowire is switched between electrocatalyst and photocatalyst for the reduction of CO2 with excellent selectivity, adjustable products, and the highest stability among the Cu-based CO2 RR catalysts, which leads to heterometallic MOF covered 1D composite, and especially the first 1D/1D-type Mott-Schottky heterojunction. Considering the diversity of MOF materials, the ultrastable heterowires offer a highly promising and feasible solution for CO2 reduction.

Nanoconfinement enabled non-covalently decorated MXene membranes for ion-sieving

Covalent modification is commonly used to tune the channel size and functionality of 2D membranes. However, common synthesis strategies used to produce such modifications are known to disrupt the structure of the membranes. Herein, we report less intrusive yet equally effective non-covalent modifications on Ti₃C₂T_x MXene membranes by a solvent treatment, where the channels are robustly decorated by protic solvents via hydrogen bond network. The densely functionalized (-O, -F, -OH) Ti₃C₂T_x channel allows multiple hydrogen bond establishment and its sub-1-nm size induces a nanoconfinement effect to greatly strengthen these interactions by maintaining solvent-MXene distance and solvent orientation. In sub-1-nm ion sieving and separation, as-decorated membranes exhibit stable ion rejection, and proton-cation (H⁺/Mⁿ⁺) selectivity that is up to 50 times and 30 times, respectively, higher than that of pristine membranes. It demonstrates the feasibility of non-covalent methods as a broad modification alternative for nanochannels integrated in energy-, resource- and environment-related applications.

Surface Restructuring of Zeolite-Encapsulated Halide Perovskite to Activate Lattice Oxygen Oxidation for Water Electrolysis

Metal-halide perovskites possess great potential for electrochemical water splitting that has not been realized due to their intolerance to water. Here, methylammonium lead halide perovskites (MAPbX₃ ) are used to electrocatalyze water oxidation in aqueous electrolytes by creating MAPbX₃ @AlPO-5 host-guest composites. Due to the protective feature of the zeolite matrix, halide perovskite nanocrystals (NCs) confined in aluminophosphate AlPO-5 zeolites achieve an excellent stability in water. The resultant electrocatalyst undergoes dynamic surface restructuring during oxygen evolution reaction (OER) with the formation of an edge-sharing α-PbO₂ active layer. The existence of charge-transfer interactions at the MAPbX₃ /α-PbO₂ interface significantly modulates the surface electron density of the α-PbO₂ and optimizes the adsorption free energy of oxygen-containing intermediate species. Furthermore, the soft-lattice nature of halide perovskites enables more facile triggering of lattice-oxygen oxidation of nanostructured α-PbO₂ , exhibiting pH-dependent OER activity and non-concerted proton-electron transfer for MAPbX₃ @AlPO-5 composite. As a result, the developed MAPbBr₃ @AlPO-5 composite manifests an ultralow overpotential of 233 mV at 10 mA·cm^-2 in 1 M KOH. Our findings offer facile access to halide perovskite applied to water electrolysis with enhanced intrinsic activity, providing a new paradigm for designing high-efficiency OER electrocatalysts. This article is protected by copyright. All rights reserved.

Reducing Overpotential of Solid-State Sulfide Conversion in Potassium-Sulfur Batteries

Improving kinetics of solid-state sulfide conversion in sulfur cathodes can enhance sulfur utilization and promote Coulombic efficiency of secondary metal-sulfur batteries. However, fundamental mechanisitic understanding of the solid-state conversion in metal-sulfur batteries remains to be achieved. Here, taking potassium-sulfur batteries as a model system, we for the first time report the reducing overpotential of solid-state K2S3 to K2S conversion via the meta-stable S2-3 intermediates on a range of transition metal single-atom catalytic sulfur hosts. The resultant catalytic sulfur host containing Cu single atoms demonstrate high discharge capacities of 1,595 and 1226 mAh g-1 at specific current densitieis of 335 and 1675 mA g-1, respectively, with stable Coulombic efficiency of ~100% during cycling. Combined spectroscopic characterizations and density functional theory computations reveal that the Cu single atom catalyst exhibits a relatively weak Cu-S bonding during sulfur redox conversion, resulting in low overpotential of solid-state K2S3-K2S conversion and high sulfur utilization. The elucidation of reaction mechanism of solid-state sulfide conversion can direct the exploration of highly efficient metal-sulfur batteries.

Total scattering measurements at the Australian Synchrotron Powder Diffraction beamline: capabilities and limitations

This study describes the capabilities and limitations of carrying out total scattering experiments on the Powder Diffraction (PD) beamline at the Australian Synchrotron, ANSTO. A maximum instrument momentum transfer of 19 Å^-1 can be achieved if the data are collected at 21 keV. The results detail how the pair distribution function (PDF) is affected by Q_max, absorption and counting time duration at the PD beamline, and refined structural parameters exemplify how the PDF is affected by these parameters. There are considerations when performing total scattering experiments at the PD beamline, including (1) samples need to be stable during data collection, (2) highly absorbing samples with a μR > 1 always require dilution and (3) only correlation length differences >0.35 Å may be resolved. A case study comparing the PDF atom-atom correlation lengths with EXAFS-derived radial distances of Ni and Pt nanocrystals is also presented, which shows good agreement between the two techniques. The results here can be used as a guide for researchers considering total scattering experiments at the PD beamline or similarly setup beamlines.

A Disordered Rubik's Cube-Inspired Framework for Sodium-Ion Batteries with Ultralong Cycle Lifespan

Sodium-ion batteries (SIBs) with fast-charge capability and long lifespan could be applied in various sustainable energy storage systems, from personal devices to grid storage. Inspired by the disordered Rubik's cube, here, we report that the high-entropy (HE) concept can lead to a very substantial improvement in the sodium storage properties of hexacyanoferrate (HCF). An example of HE-HCF has been synthesized as a proof of concept, which has achieved impressive cycling stability over 50 000 cycles and an outstanding fast-charging capability up to 75 C. Remarkable air stability and all-climate performance are observed. Its quasi-zero-strain reaction mechanism and high sodium diffusion coefficient have been measured and analyzed by multiple in situ techniques and density functional theory calculations. This strategy provides new insights into the development of advanced electrodes and provides the opportunity to tune electrochemical performance by tailoring the atomic composition.

Phase Stability of Dross Particles in Hot-Dip Zn-55wt%Al-1.6wt%Si Galvanizing Bath

Dross in a Zn-55wt%Al-1.6wt%Si metal coating bath is a mixture of bath metal and the quaternary intermetallic phase τ5c-Al₂₀Fe₅Si₂(+Zn). Understanding the properties and formation of dross in a hot-dip Al-Zn galvanizing bath at the processing temperature (~600 °C) is critical for improving the production quality of steel sheet coating. However, dross analysis is usually conducted at room temperature with dross samples taken from the hot-dip bath and it is not known how representative these samples are of the phase(s) existing at high temperature. Using in-situ synchrotron X-ray diffraction (XRD), the crystal lattice and the coefficient of thermal expansion (CTE) of the intermetallic phase have been determined in the temperature range of 30 °C to 660 °C. Phase formation and phase stability of the intermetallic phase in the dross powder have been determined, providing fundamental knowledge for optimizing the production and quality of steel sheet coating.

An artificial sodium-selective subnanochannel

Single-ion selectivity with high precision has long been pursued for fundamental bioinspired engineering and applications such as in ion separation and energy conversion. However, it remains a challenge to develop artificial ion channels to achieve single-ion selectivity comparable to their biological analogs, especially for high Na⁺/K⁺ selectivity. Here, we report an artificial sodium channel by subnanoconfinement of 4'-aminobenzo-15-crown-5 ethers (15C5s) into ~6-Å-sized metal-organic framework subnanochannel (MOFSNC). The resulting 15C5-MOFSNC shows an unprecedented Na⁺/K⁺ selectivity of tens to 10² and Na⁺/Li⁺ selectivity of 10³ under multicomponent permeation conditions, comparable to biological sodium channels. A co-ion-responsive single-file transport mechanism in 15C-MOFSNC is proposed for the preferential transport of Na⁺ over K⁺ due to the synergetic effects of size exclusion, charge selectivity, local hydrophobicity, and preferential binding with functional groups. This study provides an alternative strategy for developing potential single-ion selective channels and membranes for many applications.

Hydrophobicity Graded Gas Diffusion Layer for Stable Electrochemical Reduction of CO2

To mitigate flooding associated with the gas diffusion layer (GDL) during electroreduction of CO₂ , we report a hydrophobicity-graded hydrophobic GDL (HGGDL). Coating uniformly dispersed polytetrafluoroethylene (PTFE) binders on the carbon fiber skeleton of a hydrophilic GDL uniformizes the hydrophobicity of the GDL and also alleviates the gas blockage of pore channels. Further adherence of the PTFE macroporous layer (PMPL) to one side of the hydrophobic carbon fiber skeleton was aided by sintering. The introduced PMPL shows an appropriate pore size and enhanced hydrophobicity. As a result, the HGGDL offers spatial control of the hydrophobicity and hence water and gas transport over the GDL. Using a nickel-single-atom catalyst, the resulting HGGDL electrode provided a CO faradaic efficiency of over 83 % at a constant current density of 75 mA cm^-2 for 103 h operation in a membrane electrode assembly, which is more than 16 times that achieved with a commercial GDL.

Regulating the spin state of single-atom doped covalent triazine frameworks for efficient nitrogen fixation

Covalent triazine frameworks (CTFs), served as a versatile platform, can form expedient metal-N single-atom coordination sites as promising catalytic centers. To seek out excellent candidate catalysts of M/CTFs (M = Transition metal) for nitrogen reduction reaction (NRR), a "five-step" strategy involving spin states has been established for hierarchical high-throughput screening and reveals strong coordination ability of the CTFs, outstanding conductivity of the M/CTFs, effective adsorption and activation of N₂* attributed to the electron transfer and orbital hybridization between the M/CTFs and N₂*. Among the potential candidates, the Cr/CTF is screened out to be an excellent one for nitrogen fixation, which can not only inhibit hydrogen evolution reaction (HER) greatly but also has good thermodynamic stability (E_b =  -4.40 eV), narrow band gap (E_g = 0.03 eV), moderate adsorption energy (E_a =  -0.84 eV), large activation energy (ΔG_N2* = -0.71 eV) and a theoretical Faradaic efficiency of 100%. The spin state has been confirmed to be an important descriptor of catalytic activity and the two-state reactivity (TSR) is validated to exist in the NRR. Reaction mechanism with different spin states of Cr/CTF has been demonstrated to give a great impact on the nitrogen fixation, providing solid theoretical support for the design of more efficient NRR catalysts.

[Health hazards and hearing loss risk assessment of workers exposed to noise in an automobile manufacturing enterprise]

Objective: To investigate the current situation of occupational exposure to noise among noise workers in an automobile manufacturing enterprise in Tianjin, understand the impact of noise on workers＇ nervous system and hearing, and assess the risk of hearing loss among noise workers. Methods: In May 2021, 3516 workers in an automobile manufacturing enterprise were investigated by using a self-made questionnaire＂Noise Workers Questionnaire＂ and cluster sampling method. The occupational noise hygiene survey and occupational hazards detection were carried out in their workplaces. They were divided into noise exposure group and non-noise exposure group according to whether they were exposed to noise or not. The general characteristics, hearing and nervous system symptoms of the two groups of workers were compared, and the risk of hearing loss was assessed. Results: There were 758 workers in the noise exposure group, aged (26±5) years old, with a working age of 3.0 (2.0, 6.0) years exposed to noise. 2758 workers in the non-noise exposure group, aged (25±6) years old, with a working age of 2.0 (1.0, 4.0) years. There were statistically significant differences in the distribution of workers＇education level, working age and memory loss between the two groups (χ(2)=37.98, 38.70, 5.20, P<0.05). The workers in the noise exposure group showed a decreasing trend of insomnia, dreaminess, sweating and fatigue with the increase of working age (χ(2trend)=6.16, 7.99, P<0.05). The risk classification of binaural high-frequency hearing loss for workers in all noise positions until the age of 50 and 60 was negligible, the risk of occupational noise deafness was low for workers in stamping and welding noise positions until the age of 60. Conclusion: The occupational noise exposed to automobile manufacturing workers may cause certain harm to their nervous and auditory systems. Noise protection measures should be taken to reduce the risk of hearing loss and occupational noise deafness.

Unraveling templated-regulated distribution of isolated SiO4 tetrahedra in silicoaluminophosphate zeolites with high-throughput computations

Silicoaluminophosphate (SAPO) zeolites are well-known catalytic materials because of the mild acidity originating from the isolated SiO₄ tetrahedra in their frameworks. Regulating the distribution of isolated SiO₄ tetrahedra in SAPO zeolites is formidably challenging because SiO₄ tetrahedra tend to agglomerate to form Si islands and the isolated SiO₄ tetrahedra are difficult to determine using conventional characterization techniques. Here we synthesized Si-island-free SAPO-35 zeolites by using N-methylpiperidine as a new template, which exhibited excellent thermal stability compared to conventional SAPO-35 zeolites and a substantially improved methanol-to-olefins catalytic lifetime even comparable to that of commercial SAPO-34 zeolites. More strikingly, with the aid of high-throughput computations on 44 697 structure models combined with various state-of-the-art characterization techniques, for the first time, we reveal that the host–guest interactions between template molecules and SAPO frameworks determine the specific distributions of isolated SiO₄ tetrahedra, which are responsible for the improvement in the chemical properties of zeolites. Our work provides an insight into the template-based regulation of isolated SiO₄ tetrahedra in SAPO zeolites, which opens a new avenue in the discovery of promising zeolite catalysts with optimal SiO₄ distribution.

Electrical Regulation of CO2 Adsorption in the Metal-Organic Framework MIL-53

Active regulation of pore accessibility in microporous materials by external stimuli has aroused great attention in recent years. Here, we show the first experimental proof that guest adsorption in a dielectric microporous material can be regulated by a moderate external E-field below the gas breakdown voltage. CO₂ adsorption capacity in MIL-53 (Al) was significantly reduced, whereas that of NH₂-MIL-53 (Al) changed insignificantly under a direct current E-field gradient of 286 V/mm. Ab initio DFT calculations revealed that the E-field decreased the charge transfer between the CO₂ molecule and the adsorption site in the MIL-53 framework, which resulted in reduced binding energy and consequently lowered CO₂ adsorption capacity. This effect was only observed in the narrow pore state MIL-53 (Al) but not in its large pore configuration. Our results demonstrate the feasibility of regulating the adsorption of gas molecules in microporous materials using moderate E-fields.

Epitaxial growth of an atom-thin layer on a LiNi0.5Mn1.5O4 cathode for stable Li-ion battery cycling

Transition metal dissolution in cathode active material for Li-based batteries is a critical aspect that limits the cycle life of these devices. Although several approaches have been proposed to tackle this issue, this detrimental process is not yet overcome. Here, benefitting from the knowledge developed in the semiconductor research field, we apply an epitaxial method to construct an atomic wetting layer of LaTMO₃ (TM = Ni, Mn) on a LiNi_0.5Mn_1.5O₄ cathode material. Experimental measurements and theoretical analyses confirm a Stranski-Krastanov growth, where the strained wetting layer forms under thermodynamic equilibrium, and it is self-limited to monoatomic thickness due to the competition between the surface energy and the elastic energy. Being atomically thin and crystallographically connected to the spinel host lattices, the LaTMO₃ wetting layer offers long-term suppression of the transition metal dissolution from the cathode without impacting its dynamics. As a result, the epitaxially-engineered cathode material enables improved cycling stability (a capacity retention of about 77% after 1000 cycles at 290 mA g^-1) when tested in combination with a graphitic carbon anode and a LiPF₆-based non-aqueous electrolyte solution.

Electrochemical Hydrogenation of Furfural in Aqueous Acetic Acid Media with Enhanced 2-Methylfuran Selectivity Using CuPd Bimetallic Catalysts

Herein, we report a series of CuPd catalysts for electrochemical hydrogenation (ECH) of furfural to 2-methylfuran (MF or FurCH₃ where Fur=furyl) in aqueous 0.1 M acetic acid (pH 2.9). The highest faradaic efficiency (FE) for MF reached 75 % at -0.58 V vs. reversible hydrogen electrode with an average partial current density of 4.5 mA cm^-2 . In situ surface-enhanced Raman spectroscopic and kinetic isotopic experiments suggested that electrogenerated adsorbed hydrogen (H_ads ) was involved in the reaction and incorporation of Pd enhanced the surface coverage of H_ads and optimized the adsorption pattern of furfural, leading to a higher FE for MF. Density functional theory calculations revealed that Pd incorporation reduced the energy barrier for the hydrogenation of FurCH₂ * to FurCH₃ *. Our study demonstrates that catalyst surface structure/composition plays a crucial role in determining the selectivity in ECH and provides a new strategy for designing advanced catalysts for ECH of bio-derived oxygenates.

Ice-Assisted Synthesis of Highly Crystallized Prussian Blue Analogues for All-Climate and Long-Calendar-Life Sodium Ion Batteries

For practical sodium-ion batteries, both high electrochemical performance and cost efficiency of the electrode materials are considered as two key parameters. Prussian blue analogues (PBAs) are broadly recognized as promising cathode materials due to their low cost, high theoretical capacity, and cycling stability, although they suffer from low-crystallinity-induced performance deterioration. Herein, a facile "ice-assisted" strategy is presented to prepare highly crystallized PBAs without any additives. By suppressing structure defects, the cathode exhibits a high capacity of 123 mAh g^-1 with initial Coulombic efficiency of 87.2%, a long cycling lifespan of 3000 cycles, and significantly enhanced high/low temperature performance and calendar life. Remarkably, the low structure distortion and high sodium diffusion coefficient have been identified via in situ synchrotron powder diffraction and first-principles calculations, while its thermal stability has been analyzed by in situ heated X-ray powder diffraction. We believe the results could pave the way to the low-cost and large-scale application of PBAs in all-climate sodium-ion batteries.

Continuous Carbon Channels Enable Full Na-Ion Accessibility for Superior Room-Temperature Na-S Batteries

Porous carbon has been widely used as an efficient host to encapsulate highly active molecular sulfur (S) in Li-S and Na-S batteries. However, for these sub-nanosized pores, it is a challenge to provide fully accessible sodium ions with unobstructed channels during cycling, particularly for high sulfur content. It is well recognized that solid interphase with full coverage over the designed architectures plays critical roles in promoting rapid charge transfer and stable conversion reactions in batteries, whereas constructing a high-ionic-conductivity solid interphase in the pores is very difficult. Herein, unique continuous carbonaceous pores are tailored, which can serve as multifunctional channels to encapsulate highly active S and provide fully accessible pathways for sodium ions. Solid sodium sulfide interphase layers are also realized in the channels, showing high Na-ion conductivity toward stabilizing the redox kinetics of the S cathode during charge/discharge processes. This systematically designed carbon-hosted sulfur cathode delivers superior cycling performance (420 mAh g^-1 at 2 A g^-1 after 2000 cycles), high capacity retention of ≈90% over 500 cycles at current density of 0.5 A g^-1 , and outstanding rate capability (470 mAh g^-1 at 5 A g^-1 ) for room-temperature sodium-sulfur batteries.

PLAG1 Promotes High Glucose-Induced Angiogenesis and Migration of Retinal Endothelial Cells by Regulating the Wnt/β-Catenin Signalling Pathway

Proliferation and migration of retinal endothelial cells (RECs) contribute to the development of diabetic retinopathy. PLAG1 (pleomorphic adenoma gene 1) functions as a zinc-finger transcription factor to participate in the development of lipoblastomas or pleomorphic adenomas of the salivary glands through regulation of cell proliferation and migration. The role of PLAG1 in diabetic retinopathy was investigated in this study. Firstly, RECs were induced under high glucose conditions, which caused reduction in viability and induction of apoptosis in the RECs. Indeed, PLAG1 was elevated in high glucosetreated RECs. Functional assays showed that silence of PLAG1 increased viability and suppressed apoptosis in high glucose-induced RECs, accompanied with up-regulation of Bcl-2 and down-regulation of Bax and cleaved caspase-3. Moreover, migration of RECs was promoted by high glucose conditions, while repressed by knockdown of PLAG1. High glucose also triggered angiogenesis of RECs through up-regulation of vascular endothelial growth factor (VEGF). However, interference of PLAG1 reduced VEGF expression to retard the angiogenesis. Silence of PLAG1 also attenuated high glucose-induced up-regulation of Wnt3a, β-catenin and c-Myc in RECs. Moreover, silence of PLAG1 ameliorated histopathological changes in the retina of STZ-induced diabetic rats through down-regulation of β-catenin. In conclusion, knockdown of PLAG1 suppressed high glucose-induced angiogenesis and migration of RECs, and attenuated diabetic retinopathy by inactivation of Wnt/ β-catenin signalling.

[Epidemiological characteristics of imported COVID-19 cases in Tianjin]

Objective: To understand the epidemiological characteristics of imported COVID-19 cases in Tianjin, and provide references for risk assessment and control of imported COVID-19 cases. Methods: The information of imported COVID-19 cases were obtained from National Notifiable Disease Report System of China CDC. The data of imported COVID-19 cases reported from Tianjin airport and epidemiological surveys by CDCs at all levels from March 15, 2020 to August 31, 2021 were collected and analyzed by using software Excel 2010, SPSS 25.0 and R. Results: From March 15, 2020 to August 31, 2021, a total of 606 imported cases of COVID-19 were reported in Tianjin, in which 552 cases were finally included in the analysis. The male to female ratio of the cases was 1.8∶1, the age of the cases ranged from 3 to 77 years, and the cases were mainly reported in age group 20-39 years (59.8%). The areas where the imported case sojourned within 14 days included Europe (242 cases, 43.8%), Africa (139 cases, 25.2%), Americas (85 cases, 15.4%) and Asia (86 cases, 15.6%). The proportion of confirmed cases in autumn and winter was relatively high. During the study period, the proportion of infected persons found in custom entry quarantine decreased, and the proportion of persons with personal health declaration and under medical isolation observation increased. The interval between entry and diagnosis of infected persons tended to increase. Conclusion: The proportion of imported COVID-19 cases detected on the first day of entry at Tianjin airport decreased, and the interval to detect the infected persons trended to increase, to which close attention must be paid.

A Mo5N6 electrocatalyst for efficient Na2S electrodeposition in room-temperature sodium-sulfur batteries

Metal sulfides electrodeposition in sulfur cathodes mitigates the shuttle effect of polysulfides to achieve high Coulombic efficiency in secondary metal-sulfur batteries. However, fundamental understanding of metal sulfides electrodeposition and kinetics mechanism remains limited. Here using room-temperature sodium-sulfur cells as a model system, we report a Mo5N6 cathode material that enables efficient Na2S electrodeposition to achieve an initial discharge capacity of 512 mAh g-1 at a specific current of 1 675 mA g-1, and a final discharge capacity of 186 mAh g-1 after 10,000 cycles. Combined analyses from synchrotron-based spectroscopic characterizations, electrochemical kinetics measurements and density functional theory computations confirm that the high d-band position results in a low Na2S2 dissociation free energy for Mo5N6. This promotes Na2S electrodeposition, and thereby favours long-term cell cycling performance.

Catalytic Oxidation of K2S via Atomic Co and Pyridinic N Synergy in Potassium-Sulfur Batteries

Potassium-sulfur batteries hold practical promise for next-generation batteries because of their high theoretical gravimetric energy density and low cost. However, significant impediments are the sluggish K₂S oxidation kinetics and a lack of atomic-level understanding of K₂S oxidation. Here, for the first time, we report the catalytic oxidation of K₂S on a sulfur host with Co single atoms immobilized on nitrogen-doped carbon. On the basis of combined spectroscopic characterizations, electrochemical evaluation, and theoretical computations, we show a synergistic effect of dynamic Co-S and N-K interactions to catalyze K₂S oxidation. The resultant potassium-sulfur battery exhibited high capacities of 773 and 535 mAh g^-1 under high current densities of 1 and 2 C, respectively. These findings provide atomic-scale insights for the rational design of highly efficient sulfur hosts.

Nitrogen Rejection from Methane via a "Trapdoor" K-ZSM-25 Zeolite

Nitrogen (N₂) rejection from methane (CH₄) is the most challenging step in natural gas processing because of the close similarity of their physical-chemical properties. For decades, efforts to find a functioning material that can selectively discriminate N₂ had little outcome. Here, we report a molecular trapdoor zeolite K-ZSM-25 that has the largest unit cell among all zeolites, with the ability to capture N₂ in favor of CH₄ with a selectivity as high as 34. This zeolite was found to show a temperature-regulated gas adsorption wherein gas molecules' accessibility to the internal pores of the crystal is determined by the effect of the gas-cation interaction on the thermal oscillation of the "door-keeping" cation. N₂ and CH₄ molecules were differentiated by different admission-trigger temperatures. A mild working temperature range of 240-300 K was determined wherein N₂ gas molecules were able to access the internal pores of K-ZSM-25 while CH₄ was rejected. As confirmed by experimental, molecular dynamic, and ab initio density functional theory studies, the outstanding N₂/CH₄ selectivity is achieved within a specific temperature range where the thermal oscillation of door-blocking K⁺ provides enough space only for the relatively smaller molecule (N₂) to diffuse into and through the zeolite supercages. Such temperature-regulated adsorption of the K-ZSM-25 trapdoor zeolite opens up a new approach for rejecting N₂ from CH₄ in the gas industry without deploying energy-intensive cryogenic distillation around 100 K.

[Clinical study of selection of the upper instrumented vertebra at one level caudal to upper end vertebra in patients with Lenke 5C adolescent idiopathic scoliosis]

Objective: To investigate whether the upper instrumented vertebra (UIV) can be selected at one level caudal to upper end vertebra (UEV) in Lenke type 5C adolescent idiopathic scoliosis (AIS) patients. Methods: Total of 28 Lenke 5C AIS patients who underwent selective posterior fusion in Drum Tower Hospital of Nanjing University Medical School from September 2013 to September 2015 were included. There were 4 males and 24 females, with an age of (15.0±2.0) years, the Risser sign was graded 2-5. The following imaging parameters were measured on standing full spine X-ray before, immediately after the surgery and at the last follow-up: thoracolumbar/lumbar (TL/L) Cobb angle, coronal balance, UIV translation, lower instrumented vertebra (LIV) translation, UIV tilt, LIV tilt, and thoracic apical vertebral translation (T-AVT), lumbar apical vertebral translation (L-AVT). The patients were divided into two groups: decompensation group (n=6) and non-decompensation group (n=22). Radiographic parameters and Scoliosis Research Society (SRS)-22 scores were compared between the two groups. Results: Six cases (21.4%) had proximal decompensation at the last follow-up. There were no significant differences in Risser grade(3.8±1.0 vs 3.6±1.6), baseline thoracic Cobb angle(25.8°±2.2° vs 26.3°±6.4°) and TL/L Cobb angle(43.7°±3.4° vs 45.2°±6.5°) between the two groups (all P>0.05). However, the baseline lumbar/thoracic apical vertebra translation (L-T AVT ratio) was significantly higher in patients with proximal decompensation (6.3±1.3 vs 4.0±2.0, P=0.048). Conclusion: Selecting UIV at one level caudal to UEV, would not increase the incidence of proximal decompensation in Lenke 5C AIS patients with Risser higher than grade 2, the smaller baseline L-T AVT ratio, and with thoracic compensatory curve over 15°, and can obtain satisfactory clinical results.

A pre-registered short-term forecasting study of COVID-19 in Germany and Poland during the second wave

Disease modelling has had considerable policy impact during the ongoing COVID-19 pandemic, and it is increasingly acknowledged that combining multiple models can improve the reliability of outputs. Here we report insights from ten weeks of collaborative short-term forecasting of COVID-19 in Germany and Poland (12 October-19 December 2020). The study period covers the onset of the second wave in both countries, with tightening non-pharmaceutical interventions (NPIs) and subsequently a decay (Poland) or plateau and renewed increase (Germany) in reported cases. Thirteen independent teams provided probabilistic real-time forecasts of COVID-19 cases and deaths. These were reported for lead times of one to four weeks, with evaluation focused on one- and two-week horizons, which are less affected by changing NPIs. Heterogeneity between forecasts was considerable both in terms of point predictions and forecast spread. Ensemble forecasts showed good relative performance, in particular in terms of coverage, but did not clearly dominate single-model predictions. The study was preregistered and will be followed up in future phases of the pandemic.