Goodbye Hartmann trial: a prospective, international, multicenter, observational study on the current use of a surgical procedure developed a century ago

BACKGROUND

Literature suggests colonic resection and primary anastomosis (RPA) instead of Hartmann's procedure (HP) for the treatment of left-sided colonic emergencies. We aim to evaluate the surgical options globally used to treat patients with acute left-sided colonic emergencies and the factors that leading to the choice of treatment, comparing HP and RPA.

METHODS

This is a prospective, international, multicenter, observational study registered on ClinicalTrials.gov. A total 1215 patients with left-sided colonic emergencies who required surgery were included from 204 centers during the period of March 1, 2020, to May 31, 2020. with a 1-year follow-up.

RESULTS

564 patients (43.1%) were females. The mean age was 65.9 ± 15.6 years. HP was performed in 697 (57.3%) patients and RPA in 384 (31.6%) cases. Complicated acute diverticulitis was the most common cause of left-sided colonic emergencies (40.2%), followed by colorectal malignancy (36.6%). Severe complications (Clavien-Dindo ≥ 3b) were higher in the HP group (P < 0.001). 30-day mortality was higher in HP patients (13.7%), especially in case of bowel perforation and diffused peritonitis. 1-year follow-up showed no differences on ostomy reversal rate between HP and RPA. (P = 0.127). A backward likelihood logistic regression model showed that RPA was preferred in younger patients, having low ASA score (≤ 3), in case of large bowel obstruction, absence of colonic ischemia, longer time from admission to surgery, operating early at the day working hours, by a surgeon who performed more than 50 colorectal resections.

CONCLUSIONS

After 100 years since the first Hartmann's procedure, HP remains the most common treatment for left-sided colorectal emergencies. Treatment's choice depends on patient characteristics, the time of surgery and the experience of the surgeon. RPA should be considered as the gold standard for surgery, with HP being an exception.

Laser texturing of additively manufactured implants: A tool to programme biological response

The advent of additive manufacturing (AM) is rapidly shaping healthcare technologies pushing forward personalisation and enhanced implant functionalisation to improve clinical outcomes. AM techniques such as powder bed fusion (PBF) have been adopted despite the need to modify the as-built surface post manufacture. Medical device manufacturers have focused their efforts on refining various physical and chemical surface finishing approaches, however there is little consensus and some methods risk geometry alteration or contamination. This has led to a growing interest in laser texturing technologies to engineer the device surface. Herein, several bioinspired micro and nano textures were applied to laser PBF Ti-6Al-V4 substrates to alter physicochemical properties and in-turn we sought to understand what influences these alterations had on a human osteosarcoma cell line (MG63). Significant variations in roughness and time dependent contact angles were revealed between different patterns provide a tool to elicit desired biological responses. All surface treatments effectively enhanced early cell behaviour and in particular coverage was increased for the micro-textures. Influence of the patterns on cell differentiation was less consistent with alkaline phosphatase content increased only for the channel, grid and dual textures. While long term (21 days) mineralisation was found to be significantly enhanced in grids, dual, triangles and shark skin textures. Further regression analysis of all physicochemical and biological variables indicated that several properties should be used to strongly correlate cell behaviour, resulting in 82 % of the 21 day mineralisation dataset explained through a combination of roughness kurtosis and glycerol contact angle. Overall, this manuscript demonstrates the ability of laser texturing to offer tailored cell-surface interactions, which can be tuned to offer a tool to drive functional customisation of anatomically customised medical devices.

Novel Approach in Rectovaginal Fistula Treatment: Combination of Modified Martius Flap and Autologous Micro-Fragmented Adipose Tissue

In this paper, we introduce an innovative therapeutic approach for managing rectovaginal fistulas (RVF), by combining the modified Martius flap and micro-fragmented adipose tissue (MFAT) enriched with mesenchymal stem cells (MSC). This novel approach aims to deal with the difficulties associated with RVF, a medically complex condition with a lack of effective treatment options. We present the case of a 45-year-old female patient with a 15-year history of Crohn's disease (CD). During the preceding eight years, she had encountered substantial difficulties resulting from a rectovaginal fistula (RVF) that was active and considerable in size (measuring 3.5 cm in length and 1 cm in width). Her condition was accompanied by tissue alterations at both the vaginal and rectal openings. Following her admission to our hospital, the patient's case was discussed during both surgical and multidisciplinary hospital team (IRB) meetings. The team decided to combine a modified Martius flap with autologous MFAT containing MSCs. The results were remarkable, leading to comprehensive anatomical and clinical resolution of the RVF. Equally significant was the improvement in the patient's overall quality of life and sexual satisfaction during the one-year follow-up period. The integration of the modified Martius flap with MFAT emerges as a highly promising approach for addressing CD-related RVFs that had historically been, and still are, difficult to treat, given their often refractory nature and low healing success rates.

2-Alkyl-Substituted-4-Amino-Thieno[2,3-d]Pyrimidines: Anti-Proliferative Properties to In Vitro Breast Cancer Models

Thienopyrimidines are structural analogs of quinazolines, and the creation of new 2-alkyl derivatives of ethyl 4-aminothienopyrimidine-6-carboxylates for the study of their anti-proliferative properties is of great pharmacological interest. Some 2-alkyl-4-amino-thieno[2,3-d]pyrimidines 2-5 were synthesized, and their cyto- and phototoxicity against BALB 3T3 cells were established by an in vitro 3T3 NRU test. The obtained results indicate that the tested compounds are not cytotoxic or phototoxic, and that they are appropriate to be studied for their anti-proliferative and anti-tumor properties. The anti-proliferative potential of the compounds was investigated on MCF-7 and MDA-MB-231 cancer cells, as well as a MCF-10A cell line (normal human mammary epithelial cells). The most toxic to MCF-7 was thienopyrimidine 3 with IC50 13.42 μg/mL (IC50 0.045 μM), followed by compound 4 (IC50 28.89 μg/mL or IC50 0.11 μM). The thienopyrimidine 4 revealed higher selectivity to MCF-7 and lower activity (IC50 367 μg/mL i.e., 1.4 μM) than compound 3 with MCF-10A cells. With respect to MDA-MB-231 cells, ester 2 manifested the highest effect with IC50 52.56 μg/mL (IC50 0.16 μM), and 2-ethyl derivative 4 revealed IC50 62.86 μg/mL (IC50 0.24 μM). It was estimated that the effect of the substances on the cell cycle progression was due to cell cycle arrest in the G2 stage for MDA-MB-231, while arrest in G1 was detected for the estrogen (ER)-positive MCF-7 cell line. The tested compound's effects on the change of the zeta potential in the tumorigenic cells utilized in this study were determined. The calculation which we performed of the physicochemical properties and pharmacokinetic parameters influencing the biological activity suggested high intestinal absorption, as well as drug-likeness.

Laser-Enabled Surface Treatment of Disposable Endoscope Lens with Superior Antifouling and Optical Properties

Endoscopes are ubiquitous in minimally invasive or keyhole surgeries globally. However, frequent removal of endoscopes from the patient's body due to the lens contaminations results in undesirable consequences. Therefore, a cost-effective process chain to fabricate thermoplastic-based endoscope lenses with superior antifouling and optical properties is proposed in this research. Such multifunctional surface response was achieved by lubricant impregnation of nanostructures. Two types of topographies were produced by femtosecond laser processing of metallic molds, especially to produce single-tier laser-induced periodic surface structures (LIPSS) and two-tier multiscale structures (MS). Then, these two LIPSS and MS masters were used to replicate them onto two thermoplastic substrates, namely polycarbonate and cyclic olefin copolymer, by using hot embossing. Finally, the LIPSS and MS surfaces of the replicas were infiltrated by silicone oils to prepare lubricant-impregnated surfaces (LIS). Droplet sliding tests revealed that the durability of the as-prepared LIS improved with the increase of the lubricant viscosity. Moreover, the single-tier LIPSS replicas exhibited longer-lasting lubricant conservation properties than the MS ones. Also, LIPSS-LIS replicas demonstrated an excellent optical transparency, better than the MS-LIS ones, and almost match the performance of the reference polished ones. Furthermore, the LIPSS-LIS treatment led to superior antifouling characteristics, i.e., regarding fogging, blood adhesion, protein adsorption, and microalgae attachment, and thus demonstrated its high suitability for treating endoscopic lenses. Finally, a proof-of-concept LIPSS-LIS treatment of endoscope lenses was conducted that confirmed their superior multifunctional response.

Lab-on-a-Contact Lens Platforms Fabricated by Multi-Axis Femtosecond Laser Ablation

Contact lens sensing platforms have drawn interest in the last decade for the possibility of providing a sterile, fully integrated ocular screening technology. However, designing scalable and rapid contact lens processing methods while keeping a high resolution is still an unsolved challenge. In this article, femtosecond laser writing is employed as a rapid and precise procedure to engrave microfluidic networks into commercial contact lenses. Functional microfluidic components such as flow valves, resistors, multi-inlet geometries, and splitters are produced using a bespoke seven-axis femtosecond laser system, yielding a resolution of 80 µm. The ablation process and the tear flow within microfluidic structures is evaluated both experimentally and computationally using finite element modeling. Flow velocity drops of the 8.3%, 20.8%, and 29% were observed in valves with enlargements of the 100%, 200%, and 300%, respectively. Resistors yielded flow rate drops of 20.8%, 33%, and 50% in the small, medium, and large configurations, respectively. Two applications were introduced, namely a tear volume sensor and a tear uric acid sensor (sensitivity 16 mg L^-1 ), which are both painless alternatives to current methods and provide reduced contamination risks of tear samples.

New C2- and N3-Modified Thieno[2,3-d]Pyrimidine Conjugates with Cytotoxicity in the Nanomolar Range

AIMS

The aim of the current study was to develop and explore a series of new cytotoxic agents based on the conjugation between the thieno[2,3-d]pyrimidine moiety and a second pharmacophore at the C2 or N3 position.

BACKGROUND

As the thieno[2,3-d]pyrimidine core is a bioisostere of the 4-anilinoquinazoline, various new thienopyrimidine derivatives were synthesized by modifying the structure of the clinically used anticancer quinazoline EGFR inhibitors of the first generation - gefitinib, and second generation - dacomitinib and canertinib. It was reported that some thieno[2,3-d]pyrimidine derivatives showed improved EGFR inhibitory activity. On the other hand, the benzimidazole heterocycle is present as a pharmacophore unit in the structure of many clinically used chemotherapeutic agents. Some 2-aminobenzimidazole derivatives, possessing anticancer activity, demonstrated EGFR inhibition and the benzimidazole derivative EGF816 is currently in the second phase of clinical trials.

OBJECTIVE

The objectives of the study were design of a novel series thieno[2,3-d]pyrimidines, synthesis of the compounds and investigation of their effects towards human cancer HT-29, MDA-MB-231, HeLa, HepG2 and to normal human Lep3 cell lines. (American Type Culture Collection, ATCC, Rockville, MD, USA) Methods: The synthetic protocol implemented cyclocondensation of 2-amino-thiophenes and nitriles in inert medium, aza-Michael addition to benzimidazole derivatives and nucleophylic substitution at the N3 place. MTS test was used in order to establish the cytotoxicity of the tested compounds. SAR analysis and in silico assessment of the inhibitory potential towards human oncogenic V^599EB-Raf were performed using Molinspiration tool and Molecular Operating environment software.

RESULTS

The MTS test data showed that almost all studied thieno[2,3-d]pyirimidines (9-13, 21-22 and 25) manifest high inhibiting effect on the cell proliferation at nanomolar concentrations, whereat compounds 9 (IC₅₀ = 130 nM) and 10 (IC₅₀ = 261 nM) containing amino acid moiety, and 21 (IC₅₀ = 108 nM) possesing two thienopyrimidine moieties attached to a 1,3-disubstituted benzimidazole linker, revealed many times lower toxicity against Lep3 cells compared to the cancer cells. Thienopyrimidines 11-13 possessed high selectivity against HeLa cells. Compound 13 showed high inhibitory activity against MDA-MB-231 and HepG2, with IC50 1.44 nM and 1.11 nM respectively. To outline the possible biological target of the studied coumpounds, their potential to interact with human oncogenic V^599EB-Raf was explored by a docking study. As a result, it was suggested that the benzimidazolyl and glycyl fragments could enhance the binding ability of the new compounds by increasing the number of hydrogen bond acceptors and by stabilizing the inactive form of the enzyme.

CONCLUSION

The thienopyrimidines tested in vitro towards human cancer HT-29, MDA-MB-231, HeLa, HepG2 and normal human Lep3 cell lines demonstrated cytotoxicity in nanomolar range. It was established that compounds 9, 10 and 21 showed many times lower toxicity against normal Lep3 cells that can provide a high selectivity towards all four cancer cell lines at small concentrations. Based on the analysis of the structure-activity relationship, the observed trends in the cytotoxicity could be related to the lipophilicity and the topological polar surface area of the tested compounds. The docking study on the potential of the new thieno[2,3-d]pyrimidine-4-ones to interact with mutant V^599EB-Raf showed that the compounds might be able to stabilize the enzyme in its inactive form.

Thieno[2,3-d]pyrimidin-4(3H)-one Derivatives of Benzimidazole as Potential Anti- Breast Cancer (MDA-MB-231, MCF-7) Agents

AIMS

The purpose of this study was the synthesis of some new thienopyrimidine derivatives of 1,3-disubstituted benzimidazoles and the evaluation of their cytotoxicity against MDA-MB-231, MCF-7, and 3T3 cells lines.

BACKGROUND

An overexpression or mutational activation of TK receptors EGFR and HER2/neu is characteristic of tumors. It has been found that some thieno[2,3-d]pyrimidines exhibited better inhibitory activity against Epidermal Growth Factor Receptor (EGFR/ErbB-2) tyrosine kinase in comparison to aminoquinazolines. Breast cancer activity towards MDA-MB-231 and MCF-7 cell lines by inhibiting EGFR was revealed by a novel 2-arylbenzimidazole. This motivated the synthesis of new thienopyrimidines possessing benzimidazole fragments in order to evaluate their cytotoxicity to the above-mentioned cell lines.

OBJECTIVE

The objectives of the study were to design and synthesize a novel series of thieno[2,3-d]pyrimidines bearing biologically active moieties, such as 1,3-disubstituted-benzimidazole heterocycle, structurally similar to diaryl ureas in order to evaluate their cytotoxicity against MDA-MB-231, and MCF-7 breast cancer cell lines.

METHODS

N,N-disubstituted benzimidazole-2-one carbonitriles were synthesized by Aza-Michael addition and used as precursors to generate some of the new thieno[2,3-d]pyrimidines in acidic medium The interaction of chloroethyl-2-thienopyrimidines, 2-amino-benzimidazole and benzimidazol-2-one nitriles under solid-liquid transfer catalysis conditions led to new thienopyrimidines. MTT assay for cell survival was performed in order to evaluate the cytotoxicity of the tested compounds. A fluorescence study was conducted to elucidate some aspects of the mechanism of action.

RESULTS

The effects of nine synthesized compounds were investigated towards MDA-MB-231, MCF-7 and 3T3 cell lines. Thieno[2,3-d]pyirimidine-4-one 16 (IC₅₀ - 0.058μM) and 21 (IC₅₀ - 0.029μM) possess high cytotoxicity against MDA-MB-231 cells after 24h. The most cytotoxic compounds against breast cancer MCF-7 cells was compound 21 (IC₅₀ - 0.074μM), revealing lower cytotoxicity against mouse fibroblast 3T3 cells with IC₅₀ - 0.20μM. SAR analysis was performed. Fluorescence study of the treatment of MDA-MB cells with compound 21 was carried out in order to clarify some aspects of the mechanism of action.

CONCLUSION

The relationship between cytotoxicity of compounds 14 and 20 against MCF-7 and 3T3 cells can suggest a similar mechanism of action. The antitumor potential of the tested compounds proves the necessity for further investigation to estimate the exact inhibition pathway in the cellular processes. The fluorescence study of the treatment of MDA-MB cells with compound 21 showed a rapid process of apoptosis.

How do employment conditions and psychosocial workplace exposures impact the mental health of young workers? A systematic review

PURPOSE

To assess the quality of the research about how employment conditions and psychosocial workplace exposures impact the mental health of young workers, and to summarize the available evidence.

METHODS

We undertook a systematic search of three databases using a tiered search strategy. Studies were included if they: (a) assessed employment conditions such as working hours, precarious employment, contract type, insecurity, and flexible work, or psychosocial workplace exposures such as violence, harassment and bullying, social support, job demand and control, effort-reward imbalance, and organizational justice; (b) included a validated mental health measure; and (c) presented results specific to young people aged ≤ 30 years or were stratified by age group to provide an estimate for young people aged ≤ 30 years. The quality of included studies was assessed using the Risk of Bias in Non-randomized Studies of Exposures (ROBINS-E) tool.

RESULTS

Nine studies were included in the review. Four were related to employment conditions, capturing contract type and working hours. Five studies captured concepts relevant to psychosocial workplace exposures including workplace sexual harassment, psychosocial job quality, work stressors, and job control. The quality of the included studies was generally low, with six of the nine at serious risk of bias. Three studies at moderate risk of bias were included in the qualitative synthesis, and results of these showed contemporaneous exposure to sexual harassment and poor psychosocial job quality was associated with poorer mental health outcomes among young workers. Longitudinal evidence showed that exposure to low job control was associated with incident depression diagnosis among young workers.

CONCLUSIONS

The findings of this review illustrate that even better studies are at moderate risk of bias. Addressing issues related to confounding, selection of participants, measurement of exposures and outcomes, and missing data will improve the quality of future research in this area and lead to a clearer understanding of how employment conditions and psychosocial workplace exposures impact the mental health of young people. Generating high-quality evidence is particularly critical given the disproportionate impact of COVID-19 on young people's employment. In preparing for a post-pandemic world where poor-quality employment conditions and exposure to psychosocial workplace exposures may become more prevalent, rigorous research must exist to inform policy to protect the mental health of young workers.

Functionalization of Plastic Parts by Replication of Variable Pitch Laser-Induced Periodic Surface Structures

Surface functionalization of plastic parts has been studied and developed for several applications. However, demand for the development of reliable and profitable manufacturing strategies is still high. Here we develop and characterize a new process chain for the versatile and cost-effective production of sub-micron textured plastic parts using laser ablation. The study includes the generation of different sub-micron structures on the surface of a mold using femtosecond laser ablation and vario-thermal micro-injection molding. The manufactured parts and their surfaces are characterized in consideration of polymer replication and wetting behavior. The results of the static contact angle measurements show that replicated Laser-Induced Periodic Surface Structures (LIPSSs) always increase the hydrophobicity of plastic parts. A maximum contact angle increase of 20% was found by optimizing the manufacturing thermal boundary conditions. The wetting behavior is linked to the transition from a Wenzel to Cassie–Baxter state, and is crucial in optimizing the injection molding cycle time.

Benzo[4,5]thieno[2,3-d]pyrimidine phthalimide derivative, one of the rare noncompetitive inhibitors of dipeptidyl peptidase-4

A small library of benzo[4,5]thieno[2,3-d]pyrimidine phthalimide and amine derivatives was evaluated for inhibitory activity against dipeptidyl peptidase-4 (DPP-4). The phthalimide derivatives exhibited better activity than the amine precursors, with 2-(2-(3-chlorobenzyl)-5,6,7,8-tetrahydrobenzo[4,5]thieno[2,3-d]pyrimidin-4-yl)isoindoline-1,3-dione (compound 14) as the most effective inhibitor (IC₅₀  = 34.17 ± 5.11 μM). The five most potent selected inhibitors did not show cytotoxicity to a greater extent on Caco-2 cells, even at a concentration of 250 μM. Compound 14 is considered as a novel representative of the rare noncompetitive DPP-4 inhibitors. Molecular docking and dynamics simulation indicated the importance of the Tyr547, Lys554, and Trp629 residues of DPP-4 in the formation of the enzyme-inhibitor complex. These observations could be potentially utilized for the rational design and optimization of novel (structurally similar, with phthalimide moiety, or different) noncompetitive DPP-4 inhibitors, which are anyway rare, but favorable in terms of the saturation of substrate competition.

Correction: Femtosecond laser ablation of transparent microphotonic devices and computer-generated holograms

Correction for 'Femtosecond laser ablation of transparent microphotonic devices and computer-generated holograms' by Tawfiq Alqurashi, et al., Nanoscale, 2017, 9, 13808-13819.

Femtosecond laser ablation of transparent microphotonic devices and computer-generated holograms

Femtosecond laser ablation allows direct patterning of engineering materials in industrial settings without requiring multistage processes such as photolithography or electron beam lithography. However, femtosecond lasers have not been widely used to construct volumetric microphotonic devices and holograms with high reliability and cost efficiency. Here, a direct femtosecond laser writing process is developed to rapidly produce transmission 1D/2D gratings, Fresnel Zone Plate lenses, and computer-generated holograms. The optical properties including light transmission, angle-dependent resolution, and light polarization effects for the microphotonic devices have been characterized. Varying the depth of the microgratings from 400 nm to 1.5 μm allowed the control over their transmission intensity profile. The optical properties of the 1D/2D gratings were validated through a geometrical theory of diffraction model involving 2D phase modulation. The produced Fresnel lenses had transmission efficiency of ∼60% at normal incidence and they preserved the polarization of incident light. The computer-generated holograms had an average transmission efficiency of 35% over the visible spectrum. These microphotonic devices had wettability resistance of contact angle ranging from 44° to 125°. These devices can be used in a variety of applications including wavelength-selective filters, dynamic displays, fiber optics, and biomedical devices.

Femtosecond laser directed fabrication of optical diffusers

Optical diffusers are widely used in filament lamps, imaging systems, display technologies, lasers, and Light Emitting Diodes (LEDs). Here, a method for the fabrication of optical diffusers through femtosecond laser machining is demonstrated. Float glass surfaces were ablated with femtosecond laser light to form nanoscale ripples with dimensions comparable to the wavelength of visible light. These structures produce highly efficient and wide field of view diffusers. The machined patterns altered the average surface roughness, with the majority of particles in the range of a few hundred nanometers. The optical diffusion characteristic and a maximum diffusion angle of near 172° was achieved with optimum machining parameters. The transmission performance of the diffusers was measured to be ∼30% across the visible spectrum. The demonstrated technique has potential for producing low-cost large area optical devices. The process benefits from the flexibility of the laser writing method and enables the production of custom optical diffusers.

Laser directed writing of flat lenses on buckypaper

Laser directed patterning of carbon nanotubes-based buckypaper for producing a diffractive optical device is presented here. Using a laser ablation method the buckypaper was patterned into a binary Fresnel zone plate lens. Computational modelling was performed which revealed excellent focusing performance of the lens for both visible and THz radiations. SEM and Raman measurements of the lens were studied to analyse the laser-material interaction. The focusing properties of the lens were characterized and a good agreement with the simulations was achieved. Hence, we exploited a new way to fabricate thin flat lens. The one-step fabrication process is economical, convenient and has great potential for industrial scale up.

Encapsulation of Au Nanoparticles on a Silicon Wafer During Thermal Oxidation

We report the behavior of Au nanoparticles anchored onto a Si(111) substrate and the evolution of the combined structure with annealing and oxidation. Au nanoparticles, formed by annealing a Au film, appear to "float" upon a growing layer of SiO₂ during oxidation at high temperature, yet they also tend to become partially encapsulated by the growing silica layers. It is proposed that this occurs largely because of the differential growth rates of the silica layer on the silicon substrate between the particles and below the particles due to limited access of oxygen to the latter. This in turn is due to a combination of blockage of oxygen adsorption by the Au and limited oxygen diffusion under the gold. We think that such behavior is likely to be seen for other metal-semiconductor systems.

Influence of thermal treatment on nanostructured gold model catalysts

We fabricated films of Au onto single crystal alumina (Al(2)O(3)(0001)) and nanostructured the surface using a high resolution focused ion beam (FIB) to remove specific regions of the film. The nanostructures consist of lines and orthogonal lines cut into the film, resulting in one- and two-dimensional islands of gold. When these films are heated above 300 °C, small nanoparticles of gold form due to the dewetting of the Au film from the alumina surface. The dimensions of these islands are dictated by the nature of the nanopatterning. The isolated islands generally have the smallest nanoparticles after heating, while the unpatterned film has much larger particles. Sintering is reduced within the nanostructured metal domains due to isolation of Au islands from each other. The evaporation rate is higher within these islands, due to the smaller size of nanoparticles and hence the higher effective vapor pressure over the surface (the Kelvin effect).

Effects of the nanostructuring of gold films upon their thermal stability

We report results relating to the thermal stability of nanoparticles and show a remarkable effect of nanostructuring of the metal. Au films are nanostructured by focused ion beam sputtering (FIB) to produce isolated areas of metal, which are imaged by atomic force microscopy (AFM). Images of the surface show that, if the islands are made small enough, the metal in the islands is lost by evaporation, whereas the nonfabricated areas outside are relatively stable and the nanoparticles remain present there.

A newly discovered bacteriocin produced by Enterococcus faecalis 3915

Different Enterococci, isolated from starters for the production of the traditional Bulgarian yellow cheese 'Kashkaval' were screened for bacteriocin production, and one of them, Enterococcus faecalis 3915 demonstrated bacteriocin activity. In this study, we investigated the growth parameters of the producer strain as well as the production kinetics and preliminary characterisation of the produced bacteriocin named enterocin 3915. For the growth modelling, the logistic model was used, while bacteriocin production was monitored. Experiments on inducibility were conducted, and strain was checked for the presence of plasmids. The peptide was crudely purified by ammonium sulphate precipitation followed by preparative PAGE. The approximate molecular mass was determined electrophoretically, and the activity was visualised by electrophoresis and agar overlay technique. It was found that E. faecalis 3915 produces a bacteriocin with constitutive synthesis and chromosomal localisation of its genetic determinants. The peptide revealed to be relatively heat-stable with a molecular mass of about 6.5 kDa. As E. faecalis 3915 originates from cheese starter it can be classified as generally recognised as safe (GRAS). The inhibitory activity of enterocin 3915 comprises commensals or pathogens, so properties generally accepted as probiotic could be attributed to the producer, and potential application in the dairy industry is not to be excluded.

Anodically bonded submicron microfluidic chambers

We demonstrate the use of anodic bonding to fabricate cells with characteristic size as large as 7 x 10 mm(2), with height of approximately 640 nm, and without any internal support structure. The cells were fabricated from Hoya SD-2 glass and silicon wafers, each with 3 mm thickness to maintain dimensional stability under internal pressure. Bonding was carried out at 350 degrees C and 450 V with an electrode structure that excluded the electric field from the open region. We detail fabrication and characterization steps and also discuss the design of the fill line for access to the cavity.

Drosophila melanogaster ferritin: cDNA encoding a light chain homologue, temporal and tissue specific expression of both subunit types

Drosophila melanogaster secreted ferritin like the cytosolic ferritins of other organisms is composed of two subunits, a heavy chain homologue (HCH) and a light chain homologue (LCH). We report the cloning of a cDNA encoding the ferritin LCH of this insect. As predicted from the gene sequence, it contains no iron responsive element (IRE). Northern blot analysis reveals two mRNAs that differ in length due to the choice of polyadenylation signals. Message levels vary through the life cycle of the fly and are markedly increased by high levels of dietary iron. The gut is the main site of increased message synthesis and iron preferentially increases the amount of shorter messages. Western blotting reveals that LCH is the predominant ferritin subunit in all life stages. The amount of LCH protein corresponds well with the message levels in control animals, while in iron-fed animals LCH does not increase proportionally with the message levels. In contrast, the amount of HCH is less than that would be predicted from message levels in control animals, but corresponds well in iron-fed animals. Ferritin is abundant in gut and hemolymph of larvae and adults and in ovaries of adult flies. At pupariation, ferritin becomes more abundant in hemolymph than in other tissues.

Synthesis and antitumour activity of several new 4-aroyl-1-nitrosohydrazinecarboxamides

Six new analogues of nitrosoureas containing aroylhydrazine residue have been synthesized: (I) 4-(2-fluorobenzoyl)-1-(2-chloroethyl)-1-nitrosohydrazinecarboxamide++ +; (II) 4-(4-bromobenzoyl)-1-(2-chloroethyl)-1-nitrosohydrazinecarboxam ide; (III) 4-(4-hydroxybenzoyl)-1-(2-chloroethyl)-1-nitrosohydrazinecarboxamide+ ++; (IV) 4-(3-methoxybenzoyl)-1-(2-chloroethyl)-1-nitrosohydrazinecarbox amide; (V) 4-(4-methoxybenzoyl)-1-(2-chloroethyl)-1-nitrosohydrazinecarbox amide; (VI) 4-(4-fluorophenylacetyl)-1-(2-chloroethyl)-1-nitrosohydrazineca rboxamide. All six compounds showed a dose-dependent in vivo activity against leukaemias L1210 and P388. Compounds I and III were soluble in water. The antitumour effects were highly expressed in compound III, yielding a T/C% value of 402% in leukaemia P388, and in compound VI, 356% in leukaemia L1210.

Kainic acid microinjected into the cat raphe dorsal nucleus modulates the somatosensory evoked potentials and their cycles of excitability

Studies were made on the effect of the neuroexcitatory agent kainic acid, microinjected into raphe dorsal nucleus by glass micropipette and an air pressure system in doses ranging from 0.2 to 24.0 nmol (in volumes from 0.05 microliter to 0.47 microliter), on the somatosensory evoked potentials and their cycles of recovery (excitability) obtained from cortex (primary somatosensory and parietal associative), thalamus (ventral posterolateral nucleus and centre median nucleus), mesencephalic reticular formation and raphe dorsal nucleus. Kainic acid in doses higher than 3 nmol exerted an activating effect on the evoked potentials and their recovery cycles especially in thalamus and mesencephalic reticular formation. The analysis of these electrophysiological parameters revealed that the non-specific structures were involved to a larger extent in the activating effect of kainic acid than the specific ones. The morphological changes were not severe and were limited to a part of the raphe dorsal nucleus neurons. Our data indicate that kainic acid injected into raphe dorsal nucleus modulates (in direction of facilitation) the somatosensory evoked potentials and their cycles of excitability obtained in some brain structures. The results suggest that this nucleus is involved in the somatosensory information processing in a non-specific manner.

Interaction between glucose diet and ethanol on rat liver microsomal induction and liver plasma membrane damage in chronic hexachlorobenzene intoxication

Male Wistar rats fed for 60 days a glucose diet containing 17.5 mmol hexachlorobenzene/kg show a less pronounced increase in serum parameters and microsomal cytochrome P-450 concentration and a lower decrease in liver plasma membrane 5'-nucleotidase, K+, Na+- and Mg++-adenosine triphosphatase activities than the controls fed standard diet + hexachlorobenzene. Addition of 10% ethanol to the drinking water eliminates the "glucose effect". The glucose diet and ethanol exert contrasting effects on microsomal enzyme induction and liver plasma membrane damage in hexachlorobenzene intoxication.

Changes in the EEG-reactions to repetitive peripheral and central electrical stimulation by intraraphedorsal kainic acid in the cat

The effect of kainic acid (KA) microinjected into the dorsal raphe nucleus (NRD) of the cat through glass micropipette by means of an air pressure system in doses ranging from 2.3 to 23.5 nmol on the electroencephalographic (EEG)-reactions elicited by repetitive (6-10 Hz) peripheral (somatic and visual) or central electrical stimulation was investigated. A significant facilitation of the driving reaction evoked by rhythmic subcutaneous electrical stimulation of the forepaw was found after KA, while the driving reaction elicited by repetitive photostimulation did not change. The cortical rhythmic reactions to repetitive electrical stimulation of the specific and nonspecific nuclei of the thalamus and of the caudate nucleus (where inhibitory mechanisms are known to be involved) diminished or disappeared when generalized paroxysmal spontaneous activity occurred after kainic acid. The EEG-reaction to stimulation of the mesencephalic reticular formation was significantly facilitated after KA. The repetitive electrical stimulation of the ventral posterolateral nucleus, the centre median and the mesencephalic reticular formation also provoked the appearance of paroxysmal EEG activity or afterdischarge which in some cases developed into epileptic seizures. The data show that kainic acid injected into the dorsal raphe nucleus increases (probably by disinhibition) the excitability level of some forebrain structures connected with the nucleus.

Rat liver plasma membrane damage in hexachlorobenzene intoxication and its potentiation by ethanol

Chronic feeding of male Wistar rats with food containing hexachlorobenzene (HCB) at 17.5 mmol/kg induced elevation of serum amino-transferases and bilirubin content, increase of microsomal cytochrome P-450 concentration, and decrease of 5'-nucleotidase, K+,Na+- and Mg2+-adenosine triphosphatase activities in liver plasma membrane preparations. These changes were potentiated by ethanol consumption suggesting a possible role of liver plasma membrane damage in the pathogenesis of HCB intoxication.

Intraraphedorsal kainic acid induces paroxysmal electroencephalographic changes in some brain structures of cats

In acute experiments on cats the effect of kainic acid microinjected into the raphe dorsal nucleus on the EEG activity recorded from various brain structures was investigated. Kainic acid in doses of 0.2 to 32.0 nmol was injected by glass micropipets and an air-pressure system. The analysis of the EEG and the EEG power analysis in the usual frequency bands (delta, theta, alpha, and beta) revealed an activating to hyperexcitatory effect of kainic acid. This hyperexcitatory effect was manifested by the appearance of paroxysmal EEG patterns of different types which developed in some cases into seizure episodes or an epileptic state. Abnormal EEG changes occurred first in the thalamus and mesencephalic reticular formation. A dose-response relationship existed: the duration of the EEG with pathological patterns increased whereas the latency of their appearance decreased with increase of the dose of kainic acid. Five to seven hours after the injection there were no severe histopathologic changes in the region of the raphe dorsal nucleus. The hyperexcitatory effect of kainic acid on brain excitability might be a result of the excitatory action of kainic acid and of triggering of circuits of neuronal hyperactivity in structures connected with the raphe dorsal nucleus.

The effect of thioacetamide on rat liver plasma membrane enzymes and its potentiation by fasting

Thioacetamide, given intraperitoneally (1.4 mmol/kg body mass) to male Wistar rats 24 h before sacrifice promoted a marked elevation of serum aminotransferases, loss of microsomal cytochrome P-450 content and a significant reduction (about 50%) of the liver plasma membrane enzymatic activities (5'-nucleotidase; K+, Na+- and Mg2+-adenosine triphosphatases; and gamma-glutamyl transferase). Previous starvation for 48 h, immediately prior to thioacetamide administration, strongly potentiated the effects of thioacetamide on the serum, microsomal and liver plasma membrane parameters, while fasting itself did not affect them. The liver plasma membrane damage may be one of the reasons for the cell death in thioacetamide-intoxicated rat livers.

Epileptogenic effect of intracortically applied kainic acid in cats

The effect of two doses (5 micrograms/microliters) of kainic acid (KA) injected intracortically into the posterior lateral gyrus of cats was investigated. KA in a dose of 5 micrograms/microliters provoked cortical epileptogenic focus 8-12 min after its application, developing later into a focal seizure. Administration of 10 micrograms/microliters KA resulted after 15-20 sec in paroxysmal discharges of spikes and sharp-slow waves at the site of the application, which propagated ipsilaterally. Thereafter the paroxysmal activity spread contralaterally, became generalized and developed into an epileptic state. The effect of KA was considered to be a dose-dependent one. N-Aminomethylpiperazine-3, 3-diethyl-2, 4-pyridinedione (DKMP) in a dose of 100 mg/kg injected i.v. on the background of developed epileptic state exerted a rapid inhibitory effect of 60-100 min duration on the paroxysmal activity. employed as a model of secondary generalized focal epilepsy.

Effect of piracetam on the electrocorticogram after traumatic brain oedema in cats

The effect of piracetam on the electrocorticogram changes caused by experimentally-induced traumatic brain oedema in cats has been studied. The trauma was evoked by sticking a needle through the parietal associative cortical area. The electrocorticogram amplitude and frequency depression of the injured cortical area was eliminated and the bioelectrical activity restored to a normal pattern 22.4 +/- 10.3 min after a single dose of piracetam (100 mg/kg i.v.). The results indicate that piracetam recovered the cortical bioelectrical activity disturbed by experimentally-induced traumatic oedema. The beneficial effect of piracetam is probably due to an optimization of the functional state of the brain since piracetam acts as a nonspecific activator of brain excitability.

Generalized epilepsy induced by kainic acid and anticonvulsant effect of N-aminomethylpiperazine-3,3-diethyl-2,4-pyridinedione

Systemic administration of kainic acid in rats (30 mg/kg s.c.) and cats (5 mg/kg i.p.) produced after a definite period (30 to 60 min) secondary generalized seizures occurring first in the limbic structures (amygdala and hippocampus). The effect of N-aminomethylpiperazine-3,3-diethyl-2,4-pyridinedione (DKMP) at a dose of 100 mg/kg i.v. was evaluated on the background of developed kainic epilepsy. In rats, DKMP inhibited kainic clonic and tonic seizures and 100% of the animals survived. The drug was ineffective against limbic seizures. In cats, DKMP strongly suppressed the cortical EEG paroxysmal activity and slightly influenced the limbic one. The present data contribute to the knowledge of the anticonvulsive activity of DKMP, showing it to be a promising antiepileptic drug with mainly cortical action.

Electroencephalographic, behavioral, and histopathologic features of seizures induced by intra-amygdala application of folic acid in cats

The effects of intracerebral injection of folic acid are still controversial. We studied the electroencephalographic, behavioral, and histopathologic consequences of the seizures induced by intra-amygdala administration of various doses of FA in freely moving cats. The severity of the seizures was dose-dependant. For doses of 25 and 50 nmol, single low-amplitude spikes appeared in the amygdala 15 to 20 min after injection and a typical amygdala symptomatology was observed. From doses of 100 nmol recurrent limbic seizures occurred 40 to 80 min after injection. Finally, from doses of 150 nmol secondarily generalized seizures were induced, which could be followed by death 4 to 6 h after injection. The severity of the cerebral lesions was related to both the dose and the paroxysmal manifestations. In cases with short survival time (6 h) and few seizures the pathology was restricted to a lymphocytic and glial reaction with some ischemic cells at the injected site. In cases with status epilepticus, edema and neuronal degeneration was observed in the hippocampus, amygdala, thalamic nuclei of the midline, entorhinal cortex, and cerebellum. No neuronal alteration at the injected site was observed. For longer survival times (8 days) edema was less severe, but hyperchromatic cells were still numerous. These results, compared with those of intra-amygdala administration of kainic acid, suggest that pathologic lesions induced in cats by folic acid more closely resemble those described in man after some status epilepticus.

Piracetam and brain excitability. An electrophysiological study in cats

The effect of piracetam on the excitability of the brain has been examined in cats by electrophysiological approaches: spontaneous electrocorticogram (ECoG), visual evoked potentials (VEPs) and their recovery cycles in some brain structures (visual and associative cortex, lateral geniculate body, centrum medianum thalami and mesencephalic reticular formation). Piracetam (100 mg/kg i.v.) increased the spectral power of ECoG and particularly in the associative cortex for the frequency bands of 10-12 and 19-22 Hz. Piracetam decreased the early components and facilitated the late components of VEPs predominantly in the associative cortex. Changes were found in the recovery cycles too, namely, facilitation and shortening of recovery in all structures studied except in lateral geniculate body. The data suggest that piracetam acts as a non-specific activator on the excitability thus optimizing the functional state of the brain.

Behavioral effects of piracetam in rats with isolation syndrome

Piracetam in doses of 300 and 600 mg/kg i.p. administered for 5 days in Wistar rats with isolation syndrome produced a transient inhibition of mouse-killing behavior. Its anti-aggressive effect was most pronounced on days 2 and 3 of drug administration. On day 5 all aggressive rats again exhibited mouse-killing behavior. Piracetam in both doses was less effective in avoidance learning of aggressive rats. These results suggest that piracetam has a slight effect on the aggressive behavior of rats with isolation syndrome. No relationship exists between the antiaggressive and the learning-facilitating effects of piracetam.