Mechanical Control of Polaritonic States in Lead Halide Perovskite Phonons Strongly Coupled in THz Microcavity

We demonstrate the generation and control of polaritonic states in perovskite phonon polaritons, which are strongly coupled in the middle of a flexible Fabry-Perot cavity. We fabricated flexible perovskite films on a microporous substrate coated with graphene oxide, which led to a virtually free-standing film incorporated into the microcavity. Rabi splitting was observed when the cavity resonance was in tune with that of the phonons. The Rabi splitting energy increased as the film thickness increased, reaching 1.9 meV, which is 2.4-fold higher than the criterion for the strong coupling regime. We obtained dispersion curves for various perovskite film thicknesses exhibiting two polariton branches; clear beats between the two polaritonic branches were observed in the time domain. Flexible cavity devices with perovskite phonons enable macroscopic control over the polaritonic energy states through bending processes, which add an additional degree of freedom in the manipulation of polaritonic devices.

Terahertz thermal curve analysis for label-free identification of pathogens

In this study, we perform a thermal curve analysis with terahertz (THz) metamaterials to develop a label-free identification tool for pathogens such as bacteria and yeasts. The resonant frequency of the metasensor coated with a bacterial layer changes as a function of temperature; this provides a unique fingerprint specific to the individual microbial species without the use of fluorescent dyes and antibodies. Differential thermal curves obtained from the temperature-dependent resonance exhibit the peaks consistent with bacterial phases, such as growth, thermal inactivation, DNA denaturation, and cell wall destruction. In addition, we can distinguish gram-negative bacteria from gram-positive bacteria which show strong peaks in the temperature range of cell wall destruction. Finally, we perform THz melting curve analysis on the mixture of bacterial species in which the pathogenic bacteria are successfully distinguished from each other, which is essential for practical clinical and environmental applications such as in blood culture.

A label-free sensing method has been developed for identifying hazardous pathogens based on their intrinsic properties. This was possible by interrogating the temperature-dependent dielectric constant of the microbes in the far-infrared range.

Light intensity dependence of organic solar cell operation and dominance switching between Shockley-Read-Hall and bimolecular recombination losses

We investigated the variation of current density-voltage (J-V) characteristics of an organic solar cell (OSC) in the dark and at 9 different light intensities ranging from 0.01 to 1 sun of the AM1.5G spectrum. All three conventional parameters, short-circuit currents (Jsc), open-circuit voltage (Voc), and Fill factor (FF), representing OSC performance evolved systematically in response to light intensity increase. Unlike Jsc that showed quasi-linear monotonic increase, Voc and FF showed distinctive non-monotonic variations. To elucidate the origin of such variations, we performed extensive simulation studies including Shockley-Read-Hall (SRH) recombination losses. Simulation results were sensitive to defect densities, and simultaneous agreement to 10 measured J-V curves was possible only with the defect density of [Formula: see text]. Based on analyses of simulation results, we were able to separate current losses into SRH- and bimolecular-recombination components and, moreover, identify that the competition between SRH- and bimolecular-loss currents were responsible for the aforementioned variations in Jsc, Voc, and FF. In particular, we verified that apparent demarcation in Voc, and FF variations, which seemed to appear at different light intensities, originated from the same mechanism of dominance switching between recombination losses.

Identifying different types of microorganisms with terahertz spectroscopy

Most microbial detection techniques require pretreatment, such as fluorescent labeling and cultivation processes. Here, we propose novel tools for classifying and identifying microorganisms such as molds, yeasts, and bacteria based on their intrinsic dielectric constants in the THz frequency range. We first measured the dielectric constant of films that consisted of a wide range of microbial species, and extracted the values for the individual microbes using the effective medium theory. The dielectric constant of the molds was 1.24-1.85, which was lower than that of bacteria ranging from 2.75-4.11. The yeasts exhibited particularly high dielectric constants reaching 5.63-5.97, which were even higher than that of water. These values were consistent with the results of low-density measurements in an aqueous environment using microfluidic metamaterials. In particular, a blue shift in the metamaterial resonance occurred for molds and bacteria, whereas the molds have higher contrast relative to bacteria in the aqueous environment. By contrast, the deposition of the yeasts induced a red shift because their dielectric constant was higher than that of water. Finally, we measured the dielectric constants of peptidoglycan and polysaccharides such as chitin, α-glucan, and β-glucans (with short and long branches), and confirmed that cell wall composition was the main cause of the observed differences in dielectric constants for different types of microorganisms.

Light Intensity-dependent Variation in Defect Contributions to Charge Transport and Recombination in a Planar MAPbI3 Perovskite Solar Cell

We investigated operation of a planar MAPbI₃ solar cell with respect to intensity variation ranging from 0.01 to 1 sun. Measured J-V curves consisted of space-charge-limited currents (SCLC) in a drift-dominant range and diode-like currents in a diffusion-dominant range. The variation of power-law exponent of SCLC showed that charge trapping by defects diminished as intensity increased, and that drift currents became eventually almost ohmic. Diode-like currents were analysed using a modified Shockley-equation model, the validity of which was confirmed by comparing measured and estimated open-circuit voltages. Intensity dependence of ideality factor led us to the conclusion that there were two other types of defects that contributed mostly as recombination centers. At low intensities, monomolecular recombination occurred due to one of these defects in addition to bimolecular recombination to result in the ideality factor of ~1.7. However, at high intensities, another type of defect not only took over monomolecular recombination, but also dominated bimolecular recombination to result in the ideality factor of ~2.0. These ideality-factor values were consistent with those representing the intensity dependence of loss-current ratio estimated by using a constant internal-quantum-efficiency approximation. The presence of multiple types of defects was corroborated by findings from equivalent-circuit analysis of impedance spectra.

Increasing the sensitivity of terahertz split ring resonator metamaterials for dielectric sensing by localized substrate etching

We demonstrate a significant enhancement in the sensitivity of split ring resonator terahertz metamaterial dielectric sensors by the introduction of etched trenches into their inductive-capacitive gap area, both through finite element simulations and in experiments performed using terahertz time-domain spectroscopy. The enhanced sensitivity is demonstrated by observation of an increased frequency shift in response to overlaid dielectric material of thicknesses up to 18 µm deposited on to the sensor surface. We show that sensitivity to the dielectric is enhanced by a factor of up to ∼2.7 times by the incorporation of locally etched trenches with a depth of ∼3.4 µm, for example, and discuss the effect of the etching on the electrical properties of the sensors. Our experimental findings are in good agreement with simulations of the sensors obtained using finite element methods.

Strain Engineering of the Berry Curvature Dipole and Valley Magnetization in Monolayer MoS_{2}

The Berry curvature dipole is a physical quantity that is expected to allow various quantum geometrical phenomena in a range of solid-state systems. Monolayer transition metal dichalcogenides provide an exceptional platform to modulate and investigate the Berry curvature dipole through strain. Here, we theoretically demonstrate and experimentally verify for monolayer MoS_{2} the generation of valley orbital magnetization as a response to an in-plane electric field due to the Berry curvature dipole. The measured valley orbital magnetization shows excellent agreement with the calculated Berry curvature dipole, which can be controlled by the magnitude and direction of strain. Our results show that the Berry curvature dipole acts as an effective magnetic field in current-carrying systems, providing a novel route to generate magnetization.

Humidity sensing using THz metamaterial with silk protein fibroin

In this study, we developed hybrid humidity sensing methods by incorporating silk fibroin protein onto metamaterials, operating in the terahertz (THz) frequencies; the resonant frequency shifted but saturated at a specific thickness due to the limited sensing volume of the metamaterial. From the saturated value, we extracted the dielectric constant for the silk films. We also observed additional resonance shifts when we applied humid air to silk-coated metamaterials, due to the increased water molecule numbers on the film. Frequency shifts depend linearly on relative humidity. Also, in situ THz spectroscopy measurements reveal that the time response is instantaneous within our detection limit, especially upon exposure to humid air, whereas the small slowly decaying component appeared when we applied dry air. The time taken by the slow component in the drying process was 10-50 s, depending on film thickness. This could optimize humidity sensors as a fast and efficient detection tool to measure air humidity.

Enhanced sensitivity in THz plasmonic sensors with silver nanowires

We developed hybrid slot antenna structures for microbial sensing in the THz frequency range, where silver nanowires (AgNWs) were employed to increase the sensitivity. In order to fabricate the hybrid devices, we partially etched the AgNW in the slot antenna region, where we can expect the field enhancement effect at the AgNW tip. We measured the resonant-frequency shift observed upon the deposition of a polymer layer, and observed that the sensitivity increased upon the introduction of AgNWs, with an enhancement factor of more than four times (approximately six times in terms of figure-of-merit). The sensitivity increased with the AgNW density until saturation. In addition, we tested devices with PRD1 viruses, and obtained an enhancement factor of 3.4 for a slot antenna width of 3 μm. Furthermore, we performed finite-difference time-domain simulations, which confirmed the experimental results. The sensitivity enhancement factor decreased with the decrease of the slot width, consistent with the experimental findings. Two-dimensional mapping of the electric field confirmed the strong field localization and enhancement at the AgNW tips.

Brain Transplantation of Neural Stem Cells Cotransduced with Tyrosine Hydroxylase and GTP Cyclohydrolase 1 in Parkinsonian Rats

Neural stem cells (NSCs) of the central nervous system (CNS) recently have attracted a great deal of interest not only because of their importance in basic research on neural development, but also in terms of their therapeutic potential in neurological diseases, such as Parkinson's disease (PD). To examine if genetically modified NSCs are a suitable source for the cell and gene therapy of PD, an immortalized mouse NSC line, C17.2, was transduced with tyrosine hydroxylase (TH) gene and with GTP cyclohydrolase 1 (GTPCH1) gene, which are important enzymes in dopamine biosynthesis. The expression of TH in transduced C17.2-THGC cells was confirmed by RT-PCR, Western blot analysis, and immunocytochemistry, and expression of GTPCH1 by RT-PCR. The level of L-DOPA released by C17.2-THGC cells, as determined by HPLC assay, was 3793 pmol/106 cells, which is 760-fold higher than that produced by C17.2-TH cells, indicating that GTPCH1 expression is important for L-DOPA production by transduced C17.2 cells. Following the implantation of C17.2-THGcC NSCs into the striata of parkinsonian rats, a marked improvement in amphetamine-induced turning behavior was observed in parkinsonian rats grafted with C17.2-THGC cells but not in the control rats grafted with C17.2 cells. These results indicate that genetically modified NSCs grafted into the brain of the parkinsonian rats are capable of survival, migration, and neuronal differentiation. Collectively, these results suggest that NSCs have great potential as a source of cells for cell therapy and an effective vehicle for therapeutic gene transfer in Parkinson's disease.

Crystallization Kinetics of Lead Halide Perovskite Film Monitored by In Situ Terahertz Spectroscopy

Vibrational modes in the terahertz (THz) frequency range are good indicators of lead halide perovskite's crystallization phase. We performed real-time THz spectroscopy to monitor the crystallization kinetics in the perovskite films. First, THz absorptance was measured while the perovskite film was annealed at different temperatures. By analyzing the Avrami exponent, we observed an abrupt dimensionality switch (from 1D to 2D) with increasing temperature starting at approximately 90 °C. We also monitored the laser-induced crystallinity enhancement of the preannealed perovskite film. The THz absorptance increased initially, then subsequently decayed over a couple of hours, although the enhancement factor varies depending on the film crystallinity. In particular, the Avrami analysis implied that the light-induced crystallization was assisted by the 1D diffusion processes. The activation photon energy was measured at 2.3 eV, which indicated that enhanced crystallization originated from the photoinduced structural change of residual lead iodide at the grain boundary.

Suspended single-walled carbon nanotube fluidic sensors

In this paper, we demonstrate the fabrication of liquid flow sensors employing partially suspended single-walled carbon nanotubes (SWNTs). We have found that the sign of the conductance change in SWNT flow sensors is not influenced by the direction of water flow for both supported and suspended devices. Therefore, the streaming potential is not the principal mechanism of the SWNT sensor response. Instead, the conductance change is more likely due to a reduction in the cation density in the electrical double layer, whose equilibrium conditions are determined by the liquid flow rate. More importantly, we have found that the sensitivity of suspended SWNT devices is more than 10 times greater than that of supported SWNT devices. A reduced screening effect and an increase in effective sensing volume are responsible for the enhanced sensitivity, which is consistent with the ion depletion model. We also have measured conductance as a function of gate bias at different flow rates and have determined the flow-rate dependent effective charge density, which influences the electrostatic configuration around SWNT devices.

Effects of low-fat diet and aging on metabolic profiles of Creb3l4 knockout mice

BACKGROUND/OBJECTIVES

Increased adipose tissue mass closely associates with the development of insulin resistance and type 2 diabetes mellitus. Previously, we reported that CREB3L4 expressed in adipose tissue negatively regulates adipogenesis, and Creb3l4 knockout mice fed a high-fat diet for 16 weeks showed fat cell hyperplasia, with improved glucose tolerance and insulin sensitivity. These mice did not show significant weight gain and fat mass. Because fat diet or aging is known to be associated with the development of obesity, we examined the effects of Creb3l4 gene subjected to low-fat diet (LFD) or aging process on body composition and obesity risk.

SUBJECTS/METHODS

We fed Creb3l4 knockout mice a low-fat diet for 16 weeks (LFD group) or chow diet for over 1 year (aged group) and observed various metabolic parameters in the LFD-fed and aged Creb3l4 knockout mice.

RESULTS

LFD-fed and aged Creb3l4 knockout mice showed significant weight gain and adiposity, impaired glucose tolerance and decreased insulin sensitivity, compared with wild-type mice.

CONCLUSIONS

Creb3l4 has a critical role in metabolic phenotypes and a better understanding of its function may provide improved insight into the etiology of diabetes and other metabolic disorders.

Non-Contact Local Conductance Mapping of Individual Graphene Oxide Sheets during the Reduction Process

We used electrostatic force microscopy (EFM) to investigate local conducting states of atomically thin individual graphene oxide (GO) sheets and monitor the spatial evolution of their conducting properties during the reduction process. Because of the thinness of the GO sheets and finite carrier density, the electric field is partially screened in the reduced GO, which is manifested in the EFM phase signals. We found inhomogeneous oxidation states in as-prepared GO sheets and followed the evolution of reduction process in the individual GO sheets during both thermal and chemical reduction. We also compared the EFM measurement results with simultaneous IV characteristics to assess correlations between two measurements.

The siRNA cocktail targeting interleukin 10 receptor and transforming growth factor-β receptor on dendritic cells potentiates tumour antigen-specific CD8(+) T cell immunity

Dendritic cells (DCs) are promising therapeutic agents in the field of cancer immunotherapy due to their intrinsic immune-priming capacity. The potency of DCs, however, is readily attenuated immediately after their administration in patients as tumours and various immune cells, including DCs, produce various immunosuppressive factors such as interleukin (IL)-10 and transforming growth factor (TGF)-β that hamper the function of DCs. In this study, we used small interfering RNA (siRNA) to silence the expression of endogenous molecules in DCs, which can sense immunosuppressive factors. Among the siRNAs targeting various immunosuppressive molecules, we observed that DCs transfected with siRNA targeting IL-10 receptor alpha (siIL-10RA) initiated the strongest antigen-specific CD8(+) T cell immune responses. The potency of siIL-10RA was enhanced further by combining it with siRNA targeting TGF-β receptor (siTGF-βR), which was the next best option during the screening of this study, or the previously selected immunoadjuvant siRNA targeting phosphatase and tensin homologue deleted on chromosome 10 (PTEN) or Bcl-2-like protein 11 (BIM). In the midst of sorting out the siRNA cocktails, the cocktail of siIL-10RA and siTGF-βR generated the strongest antigen-specific CD8(+) T cell immunity. Concordantly, the knock-down of both IL-10RA and TGF-βR in DCs induced the strongest anti-tumour effects in the TC-1 P0 tumour model, a cervical cancer model expressing the human papillomavirus (HPV)-16 E7 antigen, and even in the immune-resistant TC-1 (P3) tumour model that secretes more IL-10 and TGF-β than the parental tumour cells (TC-1 P0). These results provide the groundwork for future clinical development of the siRNA cocktail-mediated strategy by co-targeting immunosuppressive molecules to enhance the potency of DC-based vaccines.

Sensitive detection of yeast using terahertz slot antennas

We demonstrated sensitive detection of individual yeast cells and yeast films by using slot antenna arrays operating in the terahertz frequency range. Microorganisms located at the slot area cause a shift in the resonant frequency of the THz transmission. The shift was investigated as a function of the surface number density for a set of devices fabricated on different substrates. In particular, sensors fabricated on a substrate with relatively low permittivity demonstrate higher sensitivity. The frequency shift decreases with increasing slot antenna width for a fixed coverage of yeast film, indicating a field enhancement effect. Furthermore, the vertical range of the effective sensing volume has been studied by varying the thickness of the yeast film. The resonant frequency shift saturates at 3.5 μm for a slot width of 2 μm. In addition, the results of finite-difference time-domain simulations are in good agreement with our experimental data.

Identification of Creb3l4 as an essential negative regulator of adipogenesis

Understanding the molecular networks that regulate adipogenesis is crucial for combating obesity. However, the identity and molecular actions of negative regulators that regulate the early development of adipocytes remain poorly understood. In this study, we investigated the role of CREB3L4, a member of the CREB3-like family, in the regulation of adiposity. Constitutive overexpression of CREB3L4 resulted in the inhibition of adipocyte differentiation, whereas knockdown of Creb3l4 expression caused differentiation of preadipocytes into mature adipocytes, bypassing the mitotic clonal expansion step. In 3T3-L1 preadipocytes, Creb3l4 knockdown resulted in increased expression of peroxisome proliferator-activated receptor γ (PPARγ2) and CCAAT/enhancer binding protein (C/EBPα), either by increasing the protein stability of C/EBPβ or by decreasing the expression of GATA3, a negative regulator of PPARγ2 expression. Consequently, increased PPARγ2 and C/EBPα levels induced adipocyte differentiation, even in the presence of minimal hormonal inducer. Thus, it can be speculated that CREB3L4 has a role as gatekeeper, inhibiting adipogenesis in 3T3-L1 preadipocytes. Moreover, adipocytes of Creb3l4-knockout mice showed hyperplasia caused by increased adipogenesis, and exhibited improved glucose tolerance and insulin sensitivity, as compared with littermate wild-type mice. These results raise the possibility that Creb3l4 could be a useful therapeutic target in the fight against obesity and metabolic syndrome.

Charge transport in light emitting devices based on colloidal quantum dots and a solution-processed nickel oxide layer

We fabricated hybrid light emitting devices based on colloidal CdSe/ZnS core/shell quantum dots and a solution-processed NiO layer. The use of a sol-gel NiO layer as a hole injection layer (HIL) resulted in overall improvement in device operation compared to a control device with a more conventional poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) HIL. In particular, luminous efficiency increased substantially because of the suppression of excessive currents and became as large as 2.45 cd/A. To manifest the origin of current reduction, temperature- and electric field-dependent variations of currents with respect to bias voltages were investigated. In a low bias voltage range below the threshold for luminance turn-on, the Poole-Frenkel (PF) emission mechanism was responsible for the current-density variation. However, the space-charge-limited current modified with PF-type mobility ruled the current-density variation in high bias voltage range above the threshold.

Detection of microorganisms using terahertz metamaterials

Microorganisms such as fungi and bacteria cause many human diseases and therefore rapid and accurate identification of these substances is essential for effective treatment and prevention of further infections. In particular, contemporary microbial detection technique is limited by the low detection speed which usually extends over a couple of days. Here we demonstrate that metamaterials operating in the terahertz frequency range shows promising potential for use in fabricating the highly sensitive and selective microbial sensors that are capable of high-speed on-site detection of microorganisms in both ambient and aqueous environments. We were able to detect extremely small amounts of the microorganisms, because their sizes are on the same scale as the micro-gaps of the terahertz metamaterials. The resonant frequency shift of the metamaterials was investigated in terms of the number density and the dielectric constants of the microorganisms, which was successfully interpreted by the change in the effective dielectric constant of a gap area.

Factors affecting unmet healthcare needs of older people in Korea

BACKGROUND

Despite the fact that the National Health Insurance programmes have ensured universal coverage for Koreans, disparities in access to health care and unmet healthcare needs still exist in Korea.

AIM

The purpose of this study was to analyse factors affecting unmet healthcare needs of older people in Korea.

METHODS

This study had a cross-sectional, descriptive design using secondary data taken from the Korean National Health and Nutrition Survey conducted in 2007-2009. A complex sampling design was used, and the participants included a nationally representative sample of 3943 people older than 64 years. Socio-demographic variables, subjective health, existence of chronic diseases, quality of life and unmet healthcare needs were included in the study instruments. Logistic regression analyses were performed in order to examine the relationship between unmet healthcare needs and independent variables.

RESULTS

According to the results, 29.4% of older women and 14.0% of older men had not visited clinics or hospitals when they needed to obtain healthcare services (unmet healthcare needs) during the past 12 months. Older women [odds ratio (OR) = 1.831, 95% confidence interval (CI) = 1.428-2.347] and those with poor subjective health (OR = 1.708, 95% CI = 1.371-2.126) and arthritis (OR = 1.278, 95% CI = 1.029-1.586) were more likely to have unmet healthcare needs than their counterparts.

CONCLUSIONS

Efforts to decrease unmet healthcare needs, targeting high-risk groups (especially for older women), are needed in order to prevent disability, decrease mortality and promote the quality of life of older people.

Terahertz conductivity of reduced graphene oxide films

We performed time-domain terahertz (THz) spectroscopy on reduced graphene oxide (rGO) network films coated on quartz substrates from dispersion solutions by spraying method. The rGO network films demonstrate high conductivity of about 900 S/cm in the THz frequency range after a high temperature reduction process. The frequency-dependent conductivities and the refractive indexes of the rGO films have been obtained and analyzed with respect to the Drude free-electron model, which is characterized by large scattering rate. Finally, we demonstrate that the THz conductivities can be manipulated by controlling the reduction process, which correlates well with the DC conductivity above the percolation limit.

Adenovirus-mediated overexpression of Tcfe3 ameliorates hyperglycaemia in a mouse model of diabetes by upregulating glucokinase in the liver

AIMS/HYPOTHESIS

Transcription factor E3 (TFE3) has been shown to increase insulin sensitivity by activating insulin-signalling pathways. However, the role of TFE3 in glucose homeostasis is not fully understood. Here, we explored the possible therapeutic potential of TFE3 for the control of hyperglycaemia using a streptozotocin-induced mouse model of diabetes.

METHODS

We achieved overabundance of TFE3 in streptozotocin mice by administering an adenovirus (Ad) or adeno-associated virus serotype 2 (AAV2). We also performed an oral glucose tolerance test (OGTT) and insulin tolerance test (ITT). To explore molecular mechanisms of blood glucose control by TFE3, transcriptional studies on the regulation of genes involved in hepatic glucose metabolism were performed using quantitative real-time PCR and chromatin immunoprecipitation assay. The binding site of TFE3 in the liver Gck gene promoter was identified using deletion and site-specific mutation studies.

RESULTS

Overabundance of TFE3 resulted in reduced hyperglycaemia as shown by the OGTT and ITT in streptozotocin-treated mice. We observed that TFE3 can upregulate Gck in a state of insulin deficiency. However, glucose-6-phosphatase and cytosolic phosphoenolpyruvate carboxykinase mRNA levels were decreased by Ad-mediated overexpression of Tcfe3. Biochemical studies revealed that the anti-hyperglycaemic effect of TFE3 is due to the upregulation of Gck. In primary cultured hepatocytes, TFE3 increased expression of Gck mRNA. Conversely, small interfering RNA-mediated knockdown of TFE3 resulted in a decrease in Gck mRNA.

CONCLUSIONS/INTERPRETATION

This study demonstrates that TFE3 counteracts hyperglycaemia in streptozotocin-treated mice. This effect could be due to the upregulation of Gck by binding of TFE3 to its cognitive promoter region.

Diffusion Length in Nanoporous Photoelectrodes of Dye-Sensitized Solar Cells under Operating Conditions Measured by Photocurrent Microscopy

We determined the carrier diffusion lengths in nanoporous layers of dye-sensitized solar cells by using scanning photocurrent microscopy. The diffusion lengths were found to be 60-100 μm for the conventional cells. In addition, we found a correlation between the carrier diffusion lengths and the cell efficiency, which proved that improvement in the diffusion length is one of the crucial factors for optimizing device performance. The diffusion length was measured for various operating conditions by varying parameters such as solar light intensity and applied electrical voltage. In particular, we observed electric-field-driven, carrier transport phenomena (i.e., drift current) in modified cells. Fitting with the drift-diffusion model enabled us to extract the electric field strengths present in the TiO2 nanoporous layer.

Transfer-printing of as-fabricated carbon nanotube devices onto various substrates

Exact replicas of carbon nanotube devices as fabricated on SiO(2) /Si substrates are prepared on various non-conventional substrates such as nonplanar or soft substrates by a simple, yet versatile, transfer-printing "cut-and-paste" method. In this way, harsh growth and fabrication processes can be minimized on the target substrates. The electrical characteristics of transfer-printed devices are compared to those of original devices.

Blocking the immunosuppressive axis with small interfering RNA targeting interleukin (IL)-10 receptor enhances dendritic cell-based vaccine potency

Improving dendritic cell (DC) functions is highly promising for therapeutic intervention of diverse diseases, including cancer. Immunosuppressive cytokines such as interleukin (IL)-10 produced by DCs themselves (autocrine) and other regulatory immune cells (paracrine) down-regulate functional profiles of DCs through specific cell surface receptors such as IL-10R. Here, we tried to improve DC functions using small interfering RNA (siRNA) technology to block an IL-10R-mediated immunosuppressive axis. DCs modified with siRNA targeting against IL-10R or IL-10 (DC/siIL-10R or DC/siIL-10) led to up-regulation of major histocompatibility complex (MHC) class II, CD40 co-stimulatory molecule, and IL-12 proinflammatory cytokine after lipopolysacharide (LPS) stimulation compared to DC/siGFP. Notably, the LPS-induced functional profiles of DC/siIL-10R were strongly resistant to the addition of recombinant IL-10, which mimicked paracrine IL-10. In contrast, those of DC/siIL-10 were reversed by adding exogenous IL-10. Consistently, DC/siIL-10R generated more human papilloma virus (HPV) E7-specific CD8(+) T cells and stronger anti-tumour effects against E7-expressing TC-1 tumour cells in vaccinated mice than DC/siGFP, as well as DC/siIL-10. Taken together, these results provide the groundwork for future clinical translation of siRNA-mediated strategy targeting IL-10R to enhance DC-based vaccine potency.

Anomalous band formation in arrays of terahertz nanoresonators

We investigate band formation in one-dimensional periodic arrays of rectangular holes which have a nanoscale width but a length of 100 μm. These holes are tailored to work as resonators in the terahertz frequency regime. We study the evolution of the electromagnetic response with the period of the array, showing that this dependence is not monotonic due to both the oscillating behavior of the coupling between holes and its long-range character.

Vertical growth and resonator properties of hexagonally shaped zinc oxide nanonails

We synthesized vertically aligned nail-shaped ZnO nanocrystal arrays on silicon substrates via a combination of a carbothermal reduction method and textured ZnO seeding layers that were precoated on silicon substrates by thermally decomposing zinc acetate, and studied their optical properties using cathodoluminescence (CL) and photoluminescence techniques. The ZnO nanonails show a sharp band-gap edge UV emission and a defect-related broad green emission. Monochromatic CL images of an individual ZnO nanonail show variations in spatial distributions of respective CL bands that had different origins. We attribute the spatial variation of CL images to an uneven distribution of luminescent defects and/or a structure-related light out-coupling from hexagonal ZnO nanostructures. The most distinct CL feature from the hexagonal head of an individual ZnO nanonail was the occurrence of a series of distinct resonant peaks within the visible wavelength range. It appeared that the head of a nanonail played the role of a hexagonal cavity so that polarization-dependent whispering gallery modes were stimulated by electron beam excitation.

Electron beam induced current measurements on single-walled carbon nanotube devices

We report on electron beam induced current (EBIC) from individual carbon nanotubes (CNTs) which are in contact with metal electrodes. The EBIC signals originate from the diffusion of excess carriers induced by the electron beam bombardment. The EBIC image enables us to locate the individual CNTs efficiently. From the polarity of the EBIC signals we can identify the electrical contacts to the metal electrodes. More importantly, we demonstrate that the EBIC can be used to characterize the local electrical properties of CNT-based devices, such as asymmetry in metal contacts and the presence of defects. EBIC is also observed regardless of the presence of insulating surfaces, indicating that the EBIC is a result of the direct interaction between the CNTs and the electron beams.

Hybrid light-emitting diodes based on flexible sheets of mass-produced ZnO nanowires

We report the production of free-standing thin sheets made up of mass-produced ZnO nanowires and the application of these nanowire sheets for the fabrication of ZnO/organic hybrid light-emitting diodes in the manner of assembly. Different p-type organic semiconductors are used to form heterojunctions with the ZnO nanowire film. Electroluminescence measurements of the devices show UV and visible emissions. Identical strong red emission is observed independent of the organic semiconductor materials used in this work. The visible emissions corresponding to the electron transition between defect levels within the energy bandgap of ZnO are discussed.

Uncovering operational mechanisms of a single-walled carbon nanotube network device using local probe electrical characterizations

The apparent field-effect-transistor (FET)-like operations of a device based on a network of single-walled carbon nanotubes (SWCNTs) are elucidated with the help of local probe electrical characterization methods using an atomic force microscope. The apparent switching behavior of the device with an on-off ratio>10(4) is found to be due to just two localized areas in the network of SWCNTs based on the measurements by electrostatic force microscopy and scanning gate microscopy. The result demonstrates that the conductance of a network of SWCNTs can be dominated by localized perturbations.

Terahertz near-field enhancement in narrow rectangular apertures on metal film

We report huge field accumulations in rectangular aperture arrays on thin metal film by using shape resonance in THz frequency region. A huge far-field transmission enhancement is observed in samples of various widths ranging from 10 mum to 1.8 mum which correspond to only an order of lambda/100. Theoretical calculations based on vector diffraction theory indicates 230 times near-field enhancement in case of the 1.8 mum wide rectangular aperture. Transmission measurement through the single rectangular aperture shows that the shape resonance, not the periodicity, is mainly responsible for the transmission enhancement and the corresponding field enhancement.

Imaging of photocurrent generation and collection in single-layer graphene

Unlike in linear nanostructures, photocurrent generated in single-layer graphene (SLG) is expected to display two-dimensional characteristics. This allows the investigation of carrier dynamics, in relation to several spatially varying factors (such as the location of photocurrent generation and collection) and the overall electron band configuration of the SLG. In this letter, we use scanning photocurrent microscopy to investigate the spatial mapping of photocurrent generation and collection in SLG in a multielectrode geometry. A strong electric field near metal-graphene contacts leads to efficient photocurrent generation, resulting in >30% efficiency for electron-hole separation. The polarity and magnitude of contact photocurrent are used to study the band alignment and graphene electrical potential near contacts, from which it is shown that there exist large-scale spatial variations in graphene electric potential. Our measurements with a multielectrode device configuration reveal that photocurrent is distributed with a clear directional dependence among different collector electrodes. In the same measurement scheme, we also determine the majority carrier in graphene under different gate conditions by imaging the thermocurrent generated by laser-induced heating of electrodes.

Enhancement of recombinant erythropoietin production in CHO cells in an incubator without CO(2) addition

The effect of low levels of carbon dioxide (CO(2)) in the gas phase on the production of recombinant human erythropoietin (EPO)in CHO cells was explored. A T-flask culture in an incubator without CO(2) addition showed a slow cell growth initially followed by the cessation of growth, while other cultures incubated under 0.5-5% CO(2) concentrations grew normally at the same rate during the entire period of cultivation. Interestingly, the production of EPO in the culture incubated under no CO(2) supply was highest among the tested cultures. The cell specific secretion rate of EPO (q(EPO)) of the culture under no CO(2) supply was about 3 times higher than that of the culture under 5% CO(2) supply. Western blot analysis and in vivo bioassay of EPO showed no apparent changes in EPO quality between the two cases of different CO(2) environments (air vs. 5% CO(2)), suggesting robust glycosylation of EPO by CHO cells even under very reduced CO(2) environment. Various combinations of the two extreme cases, with 5% CO(2) supply (suitable for cell growth) and no CO(2) addition (better for EPO production), were made in order to maximize the volumetric productivity of EPO secretion (P(V)) in CHO cells. The P(V) of the cultures programmed with initial incubation under 5% CO(2) followed by no CO(2) supply was about 2 times superior to that of the culture incubated only under no CO(2) supply. The P(V) of the culture under no CO(2) supply was slightly lower than that of culture grown under 5% CO(2). However, the q(EPO) of the no CO(2) supply case was more than 5 times higher than that of the culture under 5% CO(2) supply. In conclusion, we have demonstrated that a simple programming of CO(2) supply to an incubator can enhance the production of EPO in CHO cells remarkably, without any apparent change of the EPO quality.

Bending and bundling of metal-free vertically aligned ZnO nanowires due to electrostatic interaction

Bending and bundling was observed from vertically aligned arrays of ZnO nanowires with flat (0001) top surfaces, which were synthesized using a vapor-phase method without metal catalysts. Sufficient evidence was found to exclude electron-beam bombardment during scanning electron microscopy as a cause for bending and bundling. We attribute the bending and bundling to electrostatic interactions due to charged (0001) polar surfaces, and also discussed the threshold surface charge densities for the bending and bundling based on a simple cantilever-bending model. Some growth features were indicative of the operation of electrostatic interactions during the growth.

Advanced H2O2 oxidation for diethyl phthalate degradation in treated effluents: effect of nitrate on oxidation and a pilot-scale AOP operation

One of the objectives of this study was to delineate the effect of nitrate on diethyl phthalate (DEP) oxidation by conducting a bench-scale ultraviolet (UV)/H2O2 and O3/H2O2 operations as suggested in a previous study. We also aim to investigate DEP oxidation at various UV doses and H2O2 concentrations by performing a pilot-scale advanced oxidation processes (AOP) system, into which a portion of the effluent from a pilot-scale membrane bioreactor (MBR) plant was pumped. In the bench-scale AOP operation, the O3 oxidation alone as well as the UV irradiation without H2O2 addition could be among the desirable alternatives for the efficient removal of DEP dissolved in aqueous solutions at a low DEP concentration range of 85+/-15 microg/L. The adverse effect in the UV/H2O2 process was significantly greater than that in the UV oxidation alone, and its oxidation was almost halved by the nitrate. However, the nitrate clearly enhanced the DEP oxidation in the O3 oxidation and O3/H2O2 process. Especially, the addition of nitrate almost doubled the DEP oxidation efficiency in the O3/H2O2 process. The series of pilot-scale AOP operations confirmed that about 30-50% of DEP dissolved in the treated MBR effluent streams was, at least, oxidized by the O3 oxidation alone as well as the UV irradiation without H2O2 addition. The UV photolysis of H2O2 was most effective for DEP degradation with an H2O2 concentration of 40 mg/L at a UV dose of 500 mJ/cm2.

Photocurrent imaging of p-n junctions in ambipolar carbon nanotube transistors

We use scanning photocurrent microscopy (SPCM) to investigate the properties of internal p-n junctions in ambipolar carbon nanotube (CNT) transistors. Our SPCM images show strong signals near metal contacts whose polarity and positions change depending on the gate bias. SPCM images analyzed in conjunction with the overall conductance also indicate the existence and gate-dependent evolution of internal p-n junctions near contacts in the n-type operation regime. To determine the p-n junction position and the depletion width with a nanometer scale resolution, a Gaussian fit was used. We also measure the electric potential profile of partially suspended CNT devices at different gate biases, which shows that induced local fields can be imaged using the SPCM technique. Our experiment clearly demonstrates that SPCM is a valuable tool for imaging and optimizing electrical and optoelectronic properties of CNT based devices.

Autologous mesenchymal stem cell therapy delays the progression of neurological deficits in patients with multiple system atrophy

We evaluated the feasibility and safety of therapy with mesenchymal stem cells (MSCs) through consecutively intra-arterial and three repeated intravenous injections and compared the long-term prognosis between MSC-treated (n=11) and control multiple system atrophy (MSA) patients (n=18). The MSC-treated patients showed significantly greater improvement on the unified MSA rating scale (UMSARS) than the control patients at all visits throughout the 12-month study period. Orthostasis in UMSARS I items and cerebellar dysfunction-related items of UMSARS II items were significantly different in favor of MSC treatment compared to controls. Serial positron emission tomography scan in the MSC-treated group showed that increased fluorodeoxyglucose uptake from baseline was noted in cerebellum and frontal white matters. No serious adverse effects related to MSC therapy occurred. This study demonstrated that MSC therapy in patients with MSA was safe and delayed the progression of neurological deficits with achievement of functional improvement in the follow-up period.

Waste lime as a potential cation source in the phosphate crystallization process

In this study, the feasibility of waste lime as a potential cation source in phosphate crystallization process was investigated using laboratory scale up flow reactors, adopting sequencing batch type configuration. This research focused on its successful application in a novel sludge treatment process, which is comprised of a high performance fermenter (operating conditions: 55 degree C and pH 9) followed by a crystallization reactor. In the struvite precipitation test using synthetic wastewater, considerable nutrient removal (about 60%) in the form of ammonia and phosphate was observed within 0.5-1 hr of retention time, and only small amounts (< 5%) of ammonia stripping occurred naturally due to the alkaline (pH 9) characteristic of the feed substrate. By replacing the synthetic wastewater with the fermentation effluent, the optimal dosage of magnesium salt for struvite precipitation was 0.86 g Mg g(-1) P, similar to the mass ratio of the struvite. The optimal dosage of waste lime was 0.3 g 1(-1), resulting in 80 % of NH4-N and 41% of PO3-P removal, at about 3 hrs of retention time. Microscopic analysis showed that amorphous crystals were mainly observed in the settled solids with waste lime addition whereas prism-like crystals were found in the system with magnesium salt added. Mass balance analysis in full-scale model plants (Q=158,880 m(3)d(-1)) based on the present experimental results revealed that nutrient recycle loading from side stream to main liquid stream would be significantly reduced. The results of the experiment reveal that reuse of industrial waste lime in a nutrient recovery system has the various advantages such as higher economical benefits and sustainable treatment of the industrial waste.

A novel process for organic acids and nutrient recovery from municipal wastewater sludge

In this paper, a novel process for organic acids and nutrient recovery from municipal sludge was introduced and evaluated based on laboratory-scale studies. An economical estimation for its practical application was also performed by mass balance in a full-scale plant (Q=158,000 m3 d(-1)). This novel process comprises an upflow sludge blanket-type high performance elutriated acid fermenter (5d of SRT) for organic acids recovery followed by an upflow-type crystallisation (3 h of HRT) reactor using waste lime for nutrient recovery. In the system, the fermenter is characterised by thermophilic (55 degrees C) and alkaline conditions (pH 9), contributing to higher hydrolysis/acidogenesis (0.18 g VFA(COD) g(-1) VSS(COD), 63.3% of VFA(COD)/COD produced, based on sludge characteristics of the rainy season) and pathogen-free stabilised sludge production. It also provides the optimal condition for the following crystallisation reactor. In the process, the waste lime, which is an industrial waste, can be used for pH control and cation (Ca and Mg) sources for crystallisation reaction. A cost estimation for full-scale application demonstrates that this process has economic benefits (about 67 dollars per m3 of wastewater except for the energy expense) even in the rainy season.

Invisible plasmonic meta-materials through impedance matching to vacuum

We report on perfect transmission in two-dimensional plasmonic matamaterials in the terahertz frequency range, in which zeroth order transmittance becomes essentially unity near specific resonance frequencies. Perfect transmission may occur when the plasmonic metamaterials are perfectly impedance matched to vacuum, which is equivalent to designing an effective dielectric constant around epsilonr = -2. When the effective dielectric constant of the metamaterial is tuned towards epsilonr and the hole coverage is larger than 0.2, strong evanescent field builds up in the near field, making perfect transmission possible.

Antibacterial and antifungal activity of pinosylvin, a constituent of pine

The antibacterial and antifungal activities of pinosylvin (3,5-dihydroxy-trans-stilbene), a constituent of pine, were studied and compared with those of resveratrol (3,5,4'-trihydroxy-trans-stilbene). Pinosylvin exhibited more potent growth inhibitory activity against Candida albicans and Saccharomyces cerevisiae.

ANAMMOX and partial denitritation in anaerobic nitrogen removal from piggery waste

The anaerobic ammonium removal from a piggery waste with high strength (56 g COD/L and 5 g T-N/L) was investigated using a lab-scale upflow anaerobic sludge bed reactor at a mesophilic condition. Based on the nitrogen and carbon balance in the process, the contribution of autotrophic and heterotrophic organisms was also evaluated in terms of the influent NO2-N/NH4-N ratio (1:0.8 and 1:1.2 for Phase 1 and Phase 2, respectively). The result of this research demonstrates that the anaerobic ammonium removal from the piggery waste, using the UASB reactor, can be performed successfully. Furthermore, it appears that by using granular sludge as the seed biomass, the ANAMMOX reaction can start more quickly. Average nitrogen conversion was 0.59 kg T-N/m3 reactor-day (0.06 kg T-N/kg VSS/day) and 0.66 kg T-N/m3 reactor-day (0.08 kg T-N/kg VSS/day) for Phase 1 and Phase 2. The NO2-N/NH4-N removal ratio by the ANAMMOX was 1.48 and 1.79 for Phase 1 and Phase 2. The higher nitrite contents (about 50%) in the substrate resulted in higher nitrite nitrogen removal by the partial denitritation, as well as the ANAMMOX reaction, implying higher potential of partial denitritation. However, the result reveals that the ANAMMOX reaction was influenced less by the degree of partial denitritation, and the ANAMMOX bacteria did not compete with denitritation bacteria. The colour of the biomass at the bottom of the reactor changed from dark gray to dark red, which was accompanied by an increase in cytochrome content. At the end of the experiment, red-coloured granular sludge with diameter of 1-2 mm at the lower part of the reactor was also observed.

Municipal sludge management and disposal in South Korea: status and a new sustainable approach

Based on figures from 2002, 5216 ton/d of the municipal sludge is produced from 184 large municipal wastewater treatment plants in 111 cities with total treatment capacity of 19,229,745 m3/d. Even though the large amount of sludge disposal has depended greatly on ocean disposal and landfills until recently, the fraction of sludge reuse has gradually increased from 2.7% to 7%, since 1991. Due to a need of resources recovery from the sludge, high cost requirement of incineration and legislative regulation, recent new research is mainly focused on resources recovery and its reuse from the municipal sludge, such as high performance acid fermenter with pathogen reduction, crystallization (struvite and hydroxyapatite) using waste lime, cofermentation of municipal sludge with food waste, aerobic composting with P crystallization, vermistabilization, lime treatment, etc. Current research and practical activities with some efforts for the new technical development as well as environmental law and regulation are reviewed.

Nutrient removal and microbial granulation in an anaerobic process treating inorganic and organic nitrogenous wastewater

The sustainable anaerobic nitrogen removal and microbial granulation were investigated by using a laboratory anaerobic granular sludge bed reactor, treating synthetic (inorganic and organic) wastewater and piggery waste. From inorganic synthetic wastewater, lithoautotrophic ammonium oxidation to nitrite/nitrate was observed by an addition of hydroxylamine. Also, the results revealed that the Anammox intermediates (particularly, hydrazine) contents in the substrate would be one of the important parameters for success of the anaerobic nitrogen removal process. The results from organic synthetic wastewater show that if the Anammox organism were not great enough in the startup of the process, denitritation and anaerobic ammonification would be a process prior to the Anammox reaction. The anaerobic ammonium removal from the piggery waste was performed successfully, probably due to the Anammox intermediates contained in the substrate. This reactor shows a complex performance including the Anammox reaction and HAP crystallization, as well as having partial denitritation occurring simultaneously. From the activity test, the maximum specific N conversion rate was 0.1 g NH4-N/g VSS/day (0.77 g T-N/g VSS/day), indicating that potential denitritation is quite high. The NO2-N/NH4-N ratio to Anammox is 1.17. The colour of the biomass treating the piggery waste changed from black to dark red. It was also observed that the red-colored granular sludge had a diameter of 1-2 mm. The settleability assessment of the granular sludge revealed that the granular sludge had a good settleability even though it was worse than that of seed granular sludge.

Anaerobic digestion elutriated phased treatment of piggery waste

The performance of a novel high-rate anaerobic process, the anaerobic digestion elutriated phased treatment (ADEPT) process, for treating a slurry-type piggery waste (55 g COD/L and 37 g TS/L) was investigated. The ADEPT process consists of an acid elutriation slurry reactor for hydrolysis and acidification, followed by an upflow anaerobic sludge bed reactor for methanification. This process provides stable and high system performance with short HRT (7.4 d) and better effluent quality (2 g SCOD/L and 0.68 g VSS/L) due to the alkaline pH condition for hydrolysis/acidification phase, high refractory solids removal and ammonia toxicity reduction. The optimum pH and HRT for hydrolysis/acidogenesis of the piggery waste were 9 and 5 days at both 35 degrees C and 55 degrees C conditions. The hydrolysis and acidification rate in the mesophilic reactor were 0.05 d(-1) and 0.11 d(-1), meaning that hydrolysis was a limiting step. SCOD production by the hydrolysis was about 0.26 g SCOD/g VS(fed) (3.6 g SCOD/g VS reduction). Methane production and content in the system were 0.3 L CH4/g VS(fed) (0.67 L CH4/g VS destroyed) and 80%, respectively, corresponding to 0.23 L CH4/g COD removal (@STP).

Microscopic origin of surface-plasmon radiation in plasmonic band-gap nanostructures

We report spatial domain measurements of the damping of surface-plasmon excitations in metal films with periodic nanohole arrays. The measurements reveal a short coherent propagation length of a few microm inside nanohole arrays, consistent with delays of about 10 fs in ultrafast transmission experiments. This implies that the transmission spectra of the entire plasmonic band-gap structure are homogeneously broadened by radiative damping of surface-plasmon excitations. We show that a Rayleigh-like scattering of surface plasmons by the periodic hole array is the microscopic origin of this damping, allowing the reradiation rate to be controlled.

Quantum interference of virtual and real amplitudes in a semiconductor exciton system

By two-color pulse shaping, we simultaneously create virtual and real amplitudes for excitons in GaAs quantum wells, and monitor population and amplitude by pump-probe and four-wave mixing spectroscopies. Excited-state probability amplitude can be induced by the off-resonant, virtual excitations as well as by the resonant, real excitations. Population modulation in time-domain results from the interference between the virtual and real amplitudes, and the modulation depth reveals the relative contributions of these two amplitudes. The fact that virtual and real amplitudes have a phase difference of 90 degrees is demonstrated directly in time-domain.

Pre-acidification in anaerobic sludge bed process treating brewery wastewater

The effect of pre-acidification on anaerobic granule bed processes treating brewery wastewater was the focus of a comparison study employing two configurations, (a) a single stage upflow anaerobic sludge bed (UASB) and (b) an upflow acidification reactor in series with a methanogenic UASB. The pre-acidification reactor achieved 20 +/- 4% SCOD removal and 0.08 +/- 0.003 L of methane produced per gram of SCOD removal at a hydraulic retention time (HRT) of 0.75-4 h. Butyric acid was not detected and short chain fatty acids (SCFAs) were mainly acetic and propionic acids. The acidification ratio was about 0.42 +/- 0.02g SCFAs as COD,g of influent COD. Both systems' critical loading rate to achieve 80% COD removal was established at 34-39kgCOD/nm3 of total sludge bed volume per day. SCOD removal efficiency of 90 +/- 3% was achieved by both systems at an organic loading rate of 25 +/- 1 kg COD/m3 of total sludge bed volume per day, indicating that the installation of an acidification reactor had no effect in terms of the maximum granular activity, biomass granulation and the settleability of granules. At an organic loading rate of 67 kg COD/m3 of total sludge bed volume per day at an HRT of 1 h, the series system outperformed the single UASB by a removal of 62 compared to 57%.