1
|
Weak-Interaction Environment in a Composite Electrolyte Enabling Ultralong-Cycling High-Voltage Solid-State Lithium Batteries. J Am Chem Soc 2024. [PMID: 38560787 DOI: 10.1021/jacs.4c00976] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/04/2024]
Abstract
Poly(vinylidene fluoride) (PVDF)-based solid electrolytes with a Li salt-polymer-little residual solvent configuration are promising candidates for solid-state batteries. Herein, we clarify the microstructure of PVDF-based composite electrolyte at the atomic level and demonstrate that the Li+-interaction environment determines both interfacial stability and ion-transport capability. The polymer works as a "solid diluent" and the filler realizes a uniform solvent distribution. We propose a universal strategy of constructing a weak-interaction environment by replacing the conventional N,N-dimethylformamide (DMF) solvent with the designed 2,2,2-trifluoroacetamide (TFA). The lower Li+ binding energy of TFA forms abundant aggregates to generate inorganic-rich interphases for interfacial compatibility. The weaker interactions of TFA with PVDF and filler achieve high ionic conductivity (7.0 × 10-4 S cm-1) of the electrolyte. The solid-state Li||LiNi0.8Co0.1Mn0.1O2 cells stably cycle 4900 and 3000 times with cutoff voltages of 4.3 and 4.5 V, respectively, as well as deliver superior stability at -20 to 45 °C and a high energy density of 300 Wh kg-1 in pouch cells.
Collapse
|
2
|
Fluorinating All Interfaces Enables Super-Stable Solid-State Lithium Batteries by In Situ Conversion of Detrimental Surface Li 2 CO 3. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023:e2308493. [PMID: 38134134 DOI: 10.1002/adma.202308493] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/21/2023] [Revised: 11/25/2023] [Indexed: 12/24/2023]
Abstract
Li-stuffed battery materials intrinsically have surface impurities, typically Li2 CO3 , which introduce severe kinetic barriers and electrochemical decay for a cycling battery. For energy-dense solid-state lithium batteries (SSLBs), mitigating detrimental Li2 CO3 from both cathode and electrolyte materials is required, while the direct removal approaches hardly avoid Li2 CO3 regeneration. Here, a decarbonization-fluorination strategy to construct ultrastable LiF-rich interphases throughout the SSLBs by in situ reacting Li2 CO3 with LiPF6 at 60 °C is reported. The fluorination of all interfaces effectively suppresses parasitic reactions while substantially reducing the interface resistance, producing a dendrite-free Li anode with an impressive cycling stability of up to 7000 h. Particularly, transition metal dissolution associated with gas evolution in the cathodes is remarkably reduced, leading to notable improvements in battery rate capability and cyclability at a high voltage of 4.5 V. This all-in-one approach propels the development of SSLBs by overcoming the limitations associated with surface impurities and interfacial challenges.
Collapse
|
3
|
Dielectric Filler-Induced Hybrid Interphase Enabling Robust Solid-State Li Metal Batteries at High Areal Capacity. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023:e2311195. [PMID: 38104264 DOI: 10.1002/adma.202311195] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/25/2023] [Revised: 12/07/2023] [Indexed: 12/19/2023]
Abstract
The fillers in composite solid-state electrolyte are mainly responsible for the enhancement of the conduction of Li ions but barely regulate the formation of solid electrolyte interphase (SEI). Herein, a unique filler of dielectric NaNbO3 for the poly(vinylidene fluoride) (PVDF)-based polymer electrolyte, which is subjected to the exchange of Li+ and Na+ during cycling, is reported and the substituted Na+ is engaged in the construction of a fluorinated Li/Na hybrid SEI with high Young's modulus, facilitating the fast transport of Li+ at the interface at a high areal capacity and suppressing the Li dendrite growth. The dielectric NaNbO3 also induces the generation of high-dielectric β phase of PVDF to promote the dissociation of Li salt. The Li/Li symmetrical cell exhibits a long-term dendrite-free cycling over 600 h at a high areal capacity of 3 mA h cm-2 . The LiNi0.8 Mn0.1 Co0.1 O2 /Li solid-state cells with NaNbO3 stably cycle 2200 times at 2 C and that paired with high-loading cathode (10 mg cm-2 ) can stably cycle for 150 times and exhibit excellent performances at -20 °C. This work provides a novel design principle of fillers undertaking interfacial engineering in composite solid-state electrolytes for developing the safe and stable solid-state lithium metal battery.
Collapse
|
4
|
Defect Strategy in Solid-State Lithium Batteries. SMALL METHODS 2023:e2301162. [PMID: 37821415 DOI: 10.1002/smtd.202301162] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/30/2023] [Revised: 09/26/2023] [Indexed: 10/13/2023]
Abstract
Solid-state lithium batteries (SSLBs) have great development prospects in high-security new energy fields, but face major challenges such as poor charge transfer kinetics, high interface impedance, and unsatisfactory cycle stability. Defect engineering is an effective method to regulate the composition and structure of electrodes and electrolytes, which plays a crucial role in dominating physical and electrochemical performance. It is necessary to summarize the recent advances regarding defect engineering in SSLBs and analyze the mechanism, thus inspiring future work. This review systematically summarizes the role of defects in providing storage sites/active sites, promoting ion diffusion and charge transport of electrodes, and improving structural stability and ionic conductivity of solid-state electrolytes. The defects greatly affect the electronic structure, chemical bond strength and charge transport process of the electrodes and solid-state electrolytes to determine their electrochemical performance and stability. Then, this review presents common defect fabrication methods and the specific role mechanism of defects in electrodes and solid-state electrolytes. At last, challenges and perspectives of defect strategies in high-performance SSLBs are proposed to guide future research.
Collapse
|
5
|
A dielectric electrolyte composite with high lithium-ion conductivity for high-voltage solid-state lithium metal batteries. NATURE NANOTECHNOLOGY 2023; 18:602-610. [PMID: 36894781 DOI: 10.1038/s41565-023-01341-2] [Citation(s) in RCA: 21] [Impact Index Per Article: 21.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/17/2022] [Accepted: 02/07/2023] [Indexed: 06/18/2023]
Abstract
The ionic conductivity of composite solid-state electrolytes does not meet the application requirements of solid-state lithium (Li) metal batteries owing to the harsh space charge layer of different phases and low concentration of movable Li+. Herein, we propose a robust strategy for creating high-throughput Li+ transport pathways by coupling the ceramic dielectric and electrolyte to overcome the low ionic conductivity challenge of composite solid-state electrolytes. A highly conductive and dielectric composite solid-state electrolyte is constructed by compositing the poly(vinylidene difluoride) matrix and the BaTiO3-Li0.33La0.56TiO3-x nanowires with a side-by-side heterojunction structure (PVBL). The polarized dielectric BaTiO3 greatly promotes the dissociation of Li salt to produce more movable Li+, which locally and spontaneously transfers across the interface to coupled Li0.33La0.56TiO3-x for highly efficient transport. The BaTiO3-Li0.33La0.56TiO3-x effectively restrains the formation of the space charge layer with poly(vinylidene difluoride). These coupling effects contribute to a quite high ionic conductivity (8.2 × 10-4 S cm-1) and lithium transference number (0.57) of the PVBL at 25 °C. The PVBL also homogenizes the interfacial electric field with electrodes. The LiNi0.8Co0.1Mn0.1O2/PVBL/Li solid-state batteries stably cycle 1,500 times at a current density of 180 mA g-1, and pouch batteries also exhibit an excellent electrochemical and safety performance.
Collapse
|
6
|
Ultrathin and Robust Composite Electrolyte for Stable Solid-State Lithium Metal Batteries. ACS APPLIED MATERIALS & INTERFACES 2023; 15:17978-17985. [PMID: 36975718 DOI: 10.1021/acsami.3c02084] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
Solid-state polymer electrolytes (SPEs) are considered as one of the most promising candidates for the next-generation lithium metal batteries (LMBs). However, the large thickness and severe interfacial side reactions with electrodes seriously restrict the application of SPEs. Herein, we developed an ultrathin and robust poly(vinylidene fluoride) (PVDF)-based composite polymer electrolyte (PPSE) by introducing polyethylene (PE) separators and SiO2 nanoparticles with rich silicon hydroxyl (Si-OH) groups (nano-SiO2). The thickness of the PPSE is only 20 μm but possesses a quite high mechanical strength of 64 MPa. The introduction of nano-SiO2 fillers can tightly anchor the essential N,N-dimethylformamide (DMF) to reinforce the ion-transport ability of PVDF and suppress the side reactions of DMF with Li metal, which can significantly enhance the electrochemical stability of the PPSE. Meanwhile, the Si-OH groups on the surface of nano-SiO2 as a Lewis acid promote the dissociation of the lithium bis(fluorosulfonyl)imide (LiFSI) and immobilize the FSI- anions, achieving a high lithium transference number (0.59) and an ideal ionic conductivity (4.81 × 10-4 S cm-1) for the PPSE. The assembled Li/PPSE/Li battery can stably cycle for a record of 11,000 h, and the LiNi0.8Co0.1Mn0.1O2/PPSE/Li battery presents an initial specific capacity of 173.3 mA h g-1 at 0.5 C, which can stably cycle 300 times. This work provides a new strategy for designing composite solid-state electrolytes with high mechanical strength and ionic conductivity by modulating their framework.
Collapse
|
7
|
Determining the Role of Ion Transport Throughput in Solid‐State Lithium Batteries. Angew Chem Int Ed Engl 2023. [DOI: 10.1002/ange.202302586] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/12/2023]
|
8
|
Determining the Role of Ion Transport Throughput in Solid-State Lithium Batteries. Angew Chem Int Ed Engl 2023:e202302586. [PMID: 36896745 DOI: 10.1002/anie.202302586] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/20/2023] [Revised: 03/08/2023] [Accepted: 03/10/2023] [Indexed: 03/11/2023]
Abstract
Solid-state lithium metal batteries (SSLMBs) are promising candidates for high-energy-density energy storage devices. However, there still lacks an evaluation criterion to estimate real research status and compare overall performance of the developed SSLMBs. Herein, we propose a comprehensive descriptor, Li+ transport throughput (ΦLi+), to estimate actual conditions and output performances of the SSLMBs. The ΦLi+ is defined as molar number of Li+ passing through unit area of electrode/electrolyte interface in an hour (mol m-2 h-1), which is a quantizable value after taking complex aspects including cycle rate, electrode areal capacity and polarization into account. On this basis, we evaluate the ΦLi+ of liquid, quasi-solid-state and solid-state batteries, and highlight three key aspects to achieve high value of ΦLi+ via building highly efficient cross-phase, cross-gap and cross-interface ion transport in the solid-state battery systems. We believe the new concept of ΦLi+ provides milestone guidelines towards large-scale commercialization of SSLMBs.
Collapse
|
9
|
Inhibiting Formation and Reduction of Li 2 CO 3 to LiC x at Grain Boundaries in Garnet Electrolytes to Prevent Li Penetration. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2208951. [PMID: 36639140 DOI: 10.1002/adma.202208951] [Citation(s) in RCA: 9] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/28/2022] [Revised: 01/10/2023] [Indexed: 06/17/2023]
Abstract
Poor ion and high electron transport at the grain boundaries (GBs) of ceramic electrolytes are the primary reasons for lithium filament infiltration and short-circuiting of all-solid-state lithium metal batteries (ASLMBs). Herein, it is discovered that Li2 CO3 at the GBs of Li7 La3 Zr2 O12 (LLZO) sheets is reduced to highly electron-conductive LiCx during cycling, resulting in lithium penetration of LLZO. The ionic and electronic conductivity of the GBs within LLZO can be simultaneously tuned using sintered Li3 AlF6 . The generated LiAlO2 (LAO) infusion and F-doping at the GBs of LLZO (LAO-LLZOF) significantly reduce the Li2 CO3 content and broaden the energy bandgap of LLZO, which decreases the electronic conductivity of LAO-LLZOF. LAO forms a 3D continuous ion transport network at the GB that significantly improves the total ionic conductivity. Lithium penetration within LLZO is suppressed and an all-solid-state LiFePO4 /LAO-LLZOF/Li battery stably cycled for 5500 cycles at 3 C. This work reveals the chemistry of Li2 CO3 at the LLZO GBs during cycling, presents a novel lithium penetration mechanism within garnet electrolytes, and provides an innovative method to simultaneously regulate the ion and electron transport at the GBs in garnet electrodes for advanced ASLMBs.
Collapse
|
10
|
Self-Healable Lithium-Ion Batteries: A Review. NANOMATERIALS (BASEL, SWITZERLAND) 2022; 12:3656. [PMID: 36296849 PMCID: PMC9610850 DOI: 10.3390/nano12203656] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 07/15/2022] [Revised: 09/12/2022] [Accepted: 10/04/2022] [Indexed: 06/16/2023]
Abstract
The inner constituents of lithium-ion batteries (LIBs) are easy to deform during charging and discharging processes, and the accumulation of these deformations would result in physical fractures, poor safety performances, and short lifespan of LIBs. Recent studies indicate that the introduction of self-healing (SH) materials into electrodes or electrolytes can bring about great enhancements in their mechanical strength, thus optimizing the cycle stability of the batteries. Due to the self-healing property of these special functional materials, the fractures/cracks generated during repeated cycles could be spontaneously cured. This review systematically summarizes the mechanisms of self-healing strategies and introduces the applications of SH materials in LIBs, especially from the aspects of electrodes and electrolytes. Finally, the challenges and the opportunities of the future research as well as the potential of applications are presented to promote the research of this field.
Collapse
|
11
|
Multicomponent Copper‐Zinc Alloy Layer Enabling Ultra‐Stable Zinc Metal Anode of Aqueous Zn‐ion Battery. Angew Chem Int Ed Engl 2022. [DOI: 10.1002/ange.202212587] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
|
12
|
Multicomponent Copper‐Zinc Alloy Layer Enabling Ultra‐Stable Zinc Metal Anode of Aqueous Zn‐ion Battery. Angew Chem Int Ed Engl 2022; 61:e202212587. [DOI: 10.1002/anie.202212587] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/25/2022] [Indexed: 11/08/2022]
|
13
|
Bidirectional Lithiophilic Gradients Modification of Ultralight 3D Carbon Nanofiber Host for Stable Lithium Metal Anode. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2022; 18:e2203273. [PMID: 35871502 DOI: 10.1002/smll.202203273] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/26/2022] [Revised: 06/25/2022] [Indexed: 06/15/2023]
Abstract
Using 3D host is an effective way to solve the dendrite growth problem and accommodate volume changes of lithium (Li) metal anode. However, the preferred Li deposition on the top surface leads to the Li metal agglomeration at the surface. In addition, the large weight of the 3D host also greatly decreases the capacity based on the whole anode. Herein, a bidirectional lithiophilic gradient modification, including a top-down ZnO gradient and a bottom-up Sn gradient, is applied to an ultralight 3D carbon nanofiber host (density: 0.1 g cm-3 ) and ensures the evenly filling lithium deposition in the 3D host. ZnO transforms into highly ionic conductive Li-Zn alloy and Li2 O during cycling, enhancing the Li-ion transportation from top to bottom. The metallic Sn also lowers the Li nucleation potential, guiding the preferential Li deposition from the bottom. With such a host, a stable CE of 97.5% over 100 cycles at 1 mA cm-2 and 3 mAh cm-2 is achieved, and the full battery also delivers good cycling stability over 300 cycles with a high CE of 99.8% coupled with high loading LiFePO4 cathode (10 mg cm-2 ) and low N/P ratio (≈3).
Collapse
|
14
|
RuO 2 electronic structure and lattice strain dual engineering for enhanced acidic oxygen evolution reaction performance. Nat Commun 2022; 13:3784. [PMID: 35778401 PMCID: PMC9249734 DOI: 10.1038/s41467-022-31468-0] [Citation(s) in RCA: 59] [Impact Index Per Article: 29.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/20/2021] [Accepted: 06/17/2022] [Indexed: 11/09/2022] Open
Abstract
Developing highly active and durable electrocatalysts for acidic oxygen evolution reaction remains a great challenge due to the sluggish kinetics of the four-electron transfer reaction and severe catalyst dissolution. Here we report an electrochemical lithium intercalation method to improve both the activity and stability of RuO2 for acidic oxygen evolution reaction. The lithium intercalates into the lattice interstices of RuO2, donates electrons and distorts the local structure. Therefore, the Ru valence state is lowered with formation of stable Li-O-Ru local structure, and the Ru–O covalency is weakened, which suppresses the dissolution of Ru, resulting in greatly enhanced durability. Meanwhile, the inherent lattice strain results in the surface structural distortion of LixRuO2 and activates the dangling O atom near the Ru active site as a proton acceptor, which stabilizes the OOH* and dramatically enhances the activity. This work provides an effective strategy to develop highly efficient catalyst towards water splitting. While water splitting in acid offers higher operational performances than in alkaline conditions, there are few high-activity, acid-stable oxygen evolution electrocatalysts. Here, authors examine electrochemical Li intercalation to improve the activity and stability of RuO2 for acidic water oxidation.
Collapse
|
15
|
Revisiting the Roles of Natural Graphite in Ongoing Lithium-Ion Batteries. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2106704. [PMID: 35032965 DOI: 10.1002/adma.202106704] [Citation(s) in RCA: 33] [Impact Index Per Article: 16.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/25/2021] [Revised: 12/27/2021] [Indexed: 06/14/2023]
Abstract
Graphite, commonly including artificial graphite and natural graphite (NG), possesses a relatively high theoretical capacity of 372 mA h g-1 and appropriate lithiation/de-lithiation potential, and has been extensively used as the anode of lithium-ion batteries (LIBs). With the requirements of reducing CO2 emission to achieve carbon neutral, the market share of NG anode will continue to grow due to its excellent processability and low production energy consumption. NG, which is abundant in China, can be divided into flake graphite (FG) and microcrystalline graphite (MG). In the past 30 years, many researchers have focused on developing modified NG and its derivatives with superior electrochemical performance, promoting their wide applications in LIBs. Here, a comprehensive overview of the origin, roles, and research progress of NG-based materials in ongoing LIBs is provided, including their structure, properties, electrochemical performance, modification methods, derivatives, composites, and applications, especially the strategies to improve their high-rate and low-temperature charging performance. Prospects regarding the development orientation as well as future applications of NG-based materials are also considered, which will provide significant guidance for the current and future research of high-energy-density LIBs.
Collapse
|
16
|
Ultrathin and High-Modulus LiBO 2 Layer Highly Elevates the Interfacial Dynamics and Stability of Lithium Anode under Wide Temperature Range. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2022; 18:e2106427. [PMID: 34889053 DOI: 10.1002/smll.202106427] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/21/2021] [Revised: 11/15/2021] [Indexed: 06/13/2023]
Abstract
Lithium (Li) metal batteries (LMBs) face huge challenges to achieve long cycling life at wide temperature range owing to the severe dendrite growth at subambient temperature and the intense side reactions with electrolyte at high temperature. Herein, an ultrathin LiBO2 layer with an extremely high Young's modulus of 8.0 GPa is constructed on Li anode via an in situ reaction between Li metal and 4,4,5,5-tetramethyl-1,3,2-dioxa-borolane (TDB) to form LiBO2 @Li anode, which presents two times higher exchange current density than pristine Li anode. The LiBO2 layer presents a strong absorption to Li ions and greatly improves the interfacial dynamics of Li-ion migration, which induces homogenous lithium nucleation and deposition to form a dense lithium layer. Consequently, the Li dendrite growth during cycling at subambient temperature and the side reactions with electrolyte at high temperature are simultaneously suppressed. The LiBO2 @Li/LiNi0.8 Co0.1 Mn0.1 O2 (NCM811) full batteries with limited Li capacity and high cathode mass loading of 9.9 mg cm-2 can steadily cycle for 300 cycles with a capacity retention of 86.6%. The LiBO2 @Li/NCM811 full batteries and LiBO2 @Li/LiBO2 @Li symmetric batteries also present excellent cycling performance at both -20 and 60 °C. This work develops a strategy to achieve outstanding performance of LMBs at wide working temperature-range.
Collapse
|
17
|
A Highly Efficient Ion and Electron Conductive Interlayer To Achieve Low Self-Discharge of Lithium-Sulfur Batteries. ACS APPLIED MATERIALS & INTERFACES 2022; 14:1783-1790. [PMID: 34962756 DOI: 10.1021/acsami.1c21398] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/26/2023]
Abstract
The practical use of lithium-sulfur (Li-S) batteries is limited by serious self-discharge, fast capacity loss, and severe lithium anode erosion due to the shuttling of lithium polysulfides (LiPSs). Herein, we developed a highly efficient ion and electron conductive interlayer composed of Ti2(SO4)3/carbon composite layer-coated Li1.3Al0.3Ti1.7(PO4)3 (CLATP) and graphene to effectively block the diffusion of polysulfide anions but allow rapid Li ion transfer, therefore significantly inhibiting the self-discharge and boosting the cyclic stability of Li-S batteries. The Ti2(SO4)3/carbon thin protective layer endows an optimized adsorption ability toward LiPSs and avoids the side reactions between LATP and LiPSs. The high electronic conductivity of graphene and high ionic conductivity of CLATP ensures the hybrid interlayer rapid electron and fast Li ion transport. As a result, the Li-S battery with the hybrid interlayer shows a high discharge capacity of 671 mAh g-1 after 500 cycles with an extremely low capacity fading of 0.022% per cycle at 1 C. Moreover, the battery shows no self-discharge even after rest for 12 days. This work opens up a new way for the design of functional separators to significantly improve the electrochemical performance of Li-S batteries.
Collapse
|
18
|
Bottom-up synthesized crystalline boron quantum dots with nonvolatile memory effects through one-step hydrothermal polymerization of ammonium pentaborane and boric acid. CrystEngComm 2022. [DOI: 10.1039/d2ce00298a] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Crystalline BQDs are synthesized through a bottom-up strategy and used to fabricate a BQD–PVP memory device with nonvolatile rewritable memory effects.
Collapse
|
19
|
Lithium-ion spontaneous exchange and synergistic transport in ceramic-liquid hybrid electrolytes for highly efficient lithium-ion transfer. Sci Bull (Beijing) 2022; 67:946-954. [DOI: 10.1016/j.scib.2022.01.026] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/09/2021] [Revised: 11/23/2021] [Accepted: 01/20/2022] [Indexed: 11/30/2022]
|
20
|
Electron and Ion Co-Conductive Catalyst Achieving Instant Transformation of Lithium Polysulfide towards Li 2 S. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2105362. [PMID: 34658075 DOI: 10.1002/adma.202105362] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/12/2021] [Revised: 09/08/2021] [Indexed: 06/13/2023]
Abstract
Most of the catalysts in lithium sulfur (Li-S) batteries present low electronic conductivity and the lithium polysulfides (LiPSs) must diffuse onto the surface of the carbon materials to achieve their conversion reaction. It is a significant challenge to achieve the instantaneous transformation of LiPSs to Li2 S in Li-S batteries to suppress the shuttle effect of LiPSs. Herein, a unique electron and ion co-conductive catalyst of carbon-coated Li1.4 Al0.4 Ti1.6 (PO4 )3 (C@LATP) is developed, which not only possesses strong adsorption to LiPSs, but, more importantly, also promotes the instantaneous conversion reaction of LiPSs to Li2 S. The C@LATP nanoparticles as catalytic active sites can synchronously and efficiently provide both Li ions and electrons to facilitate the conversion reaction of LiPSs. The conversion reaction path of LiPSs using C@LATP changes from traditional "adsorption-diffusion-conversion" to novel "adsorption-conversion," which effectively lowers the decomposition barrier of Li2 S6 and promotes faster conversion of LiPSs. The shuttle effect of LiPSs is considerably suppressed and utilization of sulfur is greatly improved. The Li-S batteries using C@LATP present excellent rate, cycling, and self-discharge properties. This work highlights the significance of electron and ion co-conductive solid-state electrolytes for the instantaneous transformation of LiPSs in advanced Li-S batteries.
Collapse
|
21
|
Stable Interface Chemistry and Multiple Ion Transport of Composite Electrolyte Contribute to Ultra-long Cycling Solid-State LiNi 0.8 Co 0.1 Mn 0.1 O 2 /Lithium Metal Batteries. Angew Chem Int Ed Engl 2021; 60:24668-24675. [PMID: 34498788 DOI: 10.1002/anie.202110917] [Citation(s) in RCA: 28] [Impact Index Per Article: 9.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/13/2021] [Indexed: 11/08/2022]
Abstract
Severe interfacial side reactions of polymer electrolyte with LiNi0.8 Co0.1 Mn0.1 O2 (NCM811) cathode and Li metal anode restrict the cycling performance of solid-state NCM811/Li batteries. Herein, we propose a chemically stable ceramic-polymer-anchored solvent composite electrolyte with high ionic conductivity of 6.0×10-4 S cm-1 , which enables the solid-state NCM811/Li batteries to cycle 1500 times. The Li1.4 Al0.4 Ti1.6 (PO4 )3 nanowires (LNs) can tightly anchor the essential N, N-dimethylformamide (DMF) in poly(vinylidene fluoride) (PVDF), greatly enhancing its electrochemical stability and suppressing the side reactions. We identify the ceramic-polymer-liquid multiple ion transport mechanism of the LNs-PVDF-DMF composite electrolyte by tracking the 6 Li and 7 Li substitution behavior via solid-state NMR. The stable interface chemistry and efficient ion transport of LNs-PVDF-DMF contribute to superior performances of the solid-state batteries at wide temperature range of -20-60 °C.
Collapse
|
22
|
Cation Vacancy-Boosted Lewis Acid-Base Interactions in a Polymer Electrolyte for High-Performance Lithium Metal Batteries. ACS APPLIED MATERIALS & INTERFACES 2021; 13:51107-51116. [PMID: 34672542 DOI: 10.1021/acsami.1c17002] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Polymer electrolytes have gained extensive attention owing to their high flexibility, easy processibility, intrinsic safety, and compatibility with current fabrication technologies. However, their low ionic conductivity and lithium transference number have largely impaired their real application. Herein, novel two-dimensional clay nanosheets with abundant cation vacancies are created and incorporated in a poly(ethylene oxide) (PEO)/poly(vinylidene fluoride-co-hexafluoropropylene)-blended polymer-based electrolyte. The characterization and simulation results reveal that the cation vacancies not only provide lithium ions with additional Lewis acid-base interaction sites but also protect the PEO chains from being oxidized by excess lithium ions, which enhances the dissociation of lithium salts and the hopping mechanism of lithium ions. Benefiting from this, the polymer electrolyte shows a high ionic conductivity of 2.6 × 10-3 S cm-1 at 27 °C, a large Li+ transference number up to 0.77, and a wide electrochemical stability window of 4.9 V. Furthermore, the LiFePO4∥Li coin cell with such a polymer electrolyte delivers a high specific capacity of 145 mA h g-1 with an initial Coulombic efficiency of 99.9% and a capacity retention of 97.3% after 100 cycles at ambient temperature, as well as a superior rate performance. When pairing with high-voltage cathodes LiCoO2 and LiNi0.5Mn1.5O4, the corresponding cells also exhibit favorable electrochemical stability and a high capacity retention. In addition, the LiFePO4∥Li pouch cells display high safety even under rigorous conditions including corner-cut, bending, and nail-penetration.
Collapse
|
23
|
Constructing a Reinforced and Gradient Solid Electrolyte Interphase on Si Nanoparticles by In-Situ Thiol-Ene Click Reaction for Long Cycling Lithium-Ion Batteries. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2021; 17:e2102316. [PMID: 34494366 DOI: 10.1002/smll.202102316] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/20/2021] [Revised: 07/02/2021] [Indexed: 06/13/2023]
Abstract
Constructing a stable solid electrolyte interphase (SEI) on high-specific-capacity silicon (Si) anode is one of the most effective methods to reduce the crack of SEI and improve the cycling performance of Si anode. Herein, the authors construct a reinforced and gradient SEI on Si nanoparticles by an in-situ thiol-ene click reaction. Mercaptopropyl trimethoxysilane (MPTMS) with thiol functional groups (SH) is first grafted on the Si nanoparticles through condensation reaction, which then in-situ covalently bonds with vinylene carbonate (VC) to form a reinforced and uniform SEI on Si nanoparticles. The modified SEI with sufficient elastic Lix SiOy can homogenize the stress and strain during the lithiation of Si nanoparticles to reduce their expansion and prevent the SEI from cracking. The Si nanoparticles-graphite blending anode with the reinforced SEI exhibits excellent performance with an initial coulombic efficiency of ≈90%, a capacity of 1053.3 mA h g-1 after 500 cycles and a high capacity of 852.8 mA h g-1 even at a high current density of 3 A g-1 . Moreover, the obtained anode shows superior cycling stability under both high loadings and lean electrolyte. The in-situ thiol-ene click reaction is a practical method to construct reinforced SEI on Si nanoparticles for next-generation high-energy-density lithium-ion batteries.
Collapse
|
24
|
Coordinated Adsorption and Catalytic Conversion of Polysulfides Enabled by Perovskite Bimetallic Hydroxide Nanocages for Lithium-Sulfur Batteries. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2021; 17:e2101538. [PMID: 34160905 DOI: 10.1002/smll.202101538] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/15/2021] [Revised: 04/08/2021] [Indexed: 06/13/2023]
Abstract
Catalysis is an effective remedy for the fast capacity decay of lithium-sulfur batteries induced by the shuttling of lithium polysulfides (LiPSs), but too strong adsorption ability of many catalysts toward LiPSs increases the risk of catalyst passivation and restricts the diffusion of LiPSs for conversion. Herein, perovskite bimetallic hydroxide (CoSn(OH)6 ) nanocages are prepared, which are further wrapped by reduced graphene oxide (rGO) as the catalytic host for sulfur. Because of the coordinated valence state of Co and Sn and the intrinsic defect of the perovskite structure, such bimetallic hydroxide delivers moderate adsorption ability and enhanced catalytic activity toward LiPS conversion. Coupled with the hollow structure and the wrapped rGO as double physical barriers, the redox reaction kinetics, and sulfur utilization are effectively improved with such a host. The assembled battery delivers a good rate performance with a high capacity of 644 mAh g-1 at 2 C and long stability with a capacity decay of 0.068% per cycle over 600 cycles at 1 C. Even with a higher sulfur loading of 3.2 mg cm-2 and a low electrolyte/sulfur ratio of 5 µL mg-1 , the battery still shows high sulfur utilization and good cycling stability.
Collapse
|
25
|
Lithium Metal Electrode with Increased Air Stability and Robust Solid Electrolyte Interphase Realized by Silane Coupling Agent Modification. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2008133. [PMID: 33656208 DOI: 10.1002/adma.202008133] [Citation(s) in RCA: 18] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/02/2020] [Revised: 01/16/2021] [Indexed: 06/12/2023]
Abstract
The quality of the solid electrolyte interphase (SEI) layer is the decisive factor for the electrochemical performance of Li-metal-based batteries. Due to the absence of effective bonding, a natural SEI layer may exfoliate from the Li anode during interfacial fluctuations. Here, a silane coupling agent is introduced to serve as an adhesion promoter to bridge these two dissimilar materials via both chemical bonding and physical intertwining effects. Its inorganic reactive groups can combine with the Li substrate by forming LiOSi bonds, while organic functional groups can take part in the formation of the SEI layer and thereby bond with SEI components. Li metal electrodes with silane coupling agent modification exhibit excellent electrochemical performance, even under extreme testing conditions. This modification layer with dense structure could also protect the Li metal from corrosion by air, evidenced by the comparable electrochemical activity of the modified Li metal electrodes even after being exposed in air for 2 h. This design provides a promising pathway for the development of Li metal electrodes that will be stable both in electrolyte and in air.
Collapse
|
26
|
Integrated Structure of Cathode and Double-Layer Electrolyte for Highly Stable and Dendrite-Free All-Solid-State Li-Metal Batteries. ACS APPLIED MATERIALS & INTERFACES 2020; 12:56995-57002. [PMID: 33306338 DOI: 10.1021/acsami.0c16390] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
All-solid-state batteries have become the most potential next-generation energy-storage devices. However, it is quite difficult to simultaneously achieve a single solid-state electrolytes (SSEs) layer with both dendrite-free Li metal plating and low interfacial resistance between the cathode and SSEs. Herein, an integrated structure of cathode and double-layer solid electrolyte membrane (IS-CDL) is designed, which greatly improves the interfacial contact and suppresses the Li dendrite growth. The first "polymer in ceramic" solid electrolyte layer (SL1) consists of 80 wt % Li1.4Al0.4Ti1.6(PO4)3 (LATP) nanoparticles and 20 wt % polyethylene oxide (PEO), and the second polymer electrolyte layer is PEO-based solid electrolyte layer (SL2). The SL1 with high mechanical properties can hinder the growth of Li dendrites and reduce the interfacial resistance with the cathode. The SL2 can inhibit the side reaction between the Li metal and LATP. The Li symmetric cells with sandwich-type hierarchical electrolyte (SL2/SL1/SL2) can stably cycle over 3200 h at 0.1 mA cm-2 at 45 °C. The obtained all-solid-state LiFePO4-IS-CDL/Li batteries present a capacity of 142.6 mA h g-1 at 45 °C with the capacity retention of 91.7% after 100 cycles, and all-solid-state NCM811-IS-CDL/Li batteries deliver a specific capacity of 175.5 mA h g-1 at 60 °C. This work proposes an effective strategy to fabricate all-solid-state lithium batteries with high electrochemical performance.
Collapse
|
27
|
Progress on Lithium Dendrite Suppression Strategies from the Interior to Exterior by Hierarchical Structure Designs. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2020; 16:e2000699. [PMID: 32459890 DOI: 10.1002/smll.202000699] [Citation(s) in RCA: 22] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/04/2020] [Revised: 03/10/2020] [Indexed: 06/11/2023]
Abstract
Lithium (Li) metal is promising for high energy density batteries due to its low electrochemical potential (-3.04 V) and high specific capacity (3860 mAh g-1 ). However, the safety issues impede the commercialization of Li anode batteries. In this work, research of hierarchical structure designs for Li anodes to suppress Li dendrite growth and alleviate volume expansion from the interior (by the 3D current collector and host matrix) to the exterior (by the artificial solid electrolyte interphase (SEI), protective layer, separator, and solid state electrolyte) is concluded. The basic principles for achieving Li dendrite and volume expansion free Li anode are summarized. Following these principles, 3D porous current collector and host matrix are designed to suppress the Li dendrite growth from the interior. Second, artificial SEI, the protective layer, and separator as well as solid-state electrolyte are constructed to regulate the distribution of current and control the Li nucleation and deposition homogeneously for suppressing the Li dendrite growth from exterior of Li anode. Ultimately, this work puts forward that it is significant to combine the Li dendrite suppression strategies from the interior to exterior by 3D hierarchical structure designs and Li metal modification to achieve excellent cycling and safety performance of Li metal batteries.
Collapse
|
28
|
|
29
|
Synthesis of PdM (M = Zn, Cd, ZnCd) Nanosheets with an Unconventional Face-Centered Tetragonal Phase as Highly Efficient Electrocatalysts for Ethanol Oxidation. ACS NANO 2019; 13:14329-14336. [PMID: 31774269 DOI: 10.1021/acsnano.9b07775] [Citation(s) in RCA: 81] [Impact Index Per Article: 16.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Recently, crystal-phase engineering has been emerging as a promising strategy to tune the physicochemical properties of noble metal catalysts and further improve their catalytic performance. However, the synthesis of noble metal catalysts with an unconventional crystal phase as well as desired composition and morphology still remains a great challenge. Herein, a series of PdM (M = Zn, Cd, ZnCd) nanosheets (NSs) with thickness less than 5 nm have been synthesized via a facile one-pot wet-chemical method. In particular, different from the conventional face-centered cubic (fcc) phase, PdM NSs possess an unconventional face-centered tetragonal (fct) phase. As a proof-of-concept application, the fct PdZn NSs exhibit significantly enhanced mass activity and stability in ethanol oxidation reaction, compared to the pure Pd NSs and commercial Pd black catalyst.
Collapse
|
30
|
Capacity Loss Mechanism of the Li 4Ti 5O 12 Microsphere Anode of Lithium-Ion Batteries at High Temperature and Rate Cycling Conditions. ACS APPLIED MATERIALS & INTERFACES 2019; 11:37357-37364. [PMID: 31532614 DOI: 10.1021/acsami.9b14119] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Li4Ti5O12 (LTO) as the anode of lithium (Li) ion batteries has high interfacial side reactivity with the electrolyte, which leads to severe gassing behavior and poor cycling stability. Herein, the capacity loss mechanism of the high-tap density LTO microsphere anode under different temperatures (25, 45, and 60 °C) and charge/discharge rates (1 and 5 C) is systematically investigated. The capacity retentions of the LTO/Li cell after 500 cycles at 1 C are 95.6, 90.0, and 87.1% under three temperatures, which drop to 91.9, 58.3, and 20.9% when cycling at 5 C, respectively. Results show that the high temperature and rate almost do not damage the structure of LTO, but greatly affect the thickness and components of the solid electrolyte interface (SEI), and consequently reduce the performance of the LTO/Li cells. An SEI mainly consisting of inorganic species forms on LTO after 500 cycles at 1 C, while organic compounds are observed after 500 cycles at 5 C. The capacity of cycled LTO cannot recover again because of the thick SEI although using new Li metal anodes, separators, and electrolytes. This work demonstrates that it is of great significance for LTO to construct a stable SEI for achieving excellent cycling performance at a high rate and temperature.
Collapse
|
31
|
Interconnected Ultrasmall V 2O 3 and Li 4Ti 5O 12 Particles Construct Robust Interfaces for Long-Cycling Anodes of Lithium-Ion Batteries. ACS APPLIED MATERIALS & INTERFACES 2019; 11:29993-30000. [PMID: 31353902 DOI: 10.1021/acsami.9b10327] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Designing composite structures of active materials is critical for high-performance lithium-ion batteries, as it determines the reversibility of lithium-ion insertion and extraction of the electrodes. The V2O3 anode has a high specific capacity but presents poor cycling stability due to a large volume change. Herein, a novel C@V2O3-Li4Ti5O12 composite with ultrastable cycling stability is constructed. In this composite structure, the interconnected ultrasmall V2O3 and Li4Ti5O12 nanoparticles (5-10 nm) construct robust interfaces in the carbon matrix. The Li4Ti5O12 nanoparticles with excellent cycling stability and a minor volume change act as fixtures that effectively restrict the volume change of V2O3 nanoparticles and improve the cycling stability of the C@V2O3-Li4Ti5O12 composite. The C@V2O3-Li4Ti5O12 composite maintains no degradation during 500 cycles under a current density of 100 mA g-1. The results demonstrate that constructing a highly stable interface between the active nanoparticles with smaller and larger volume changes is of great significance to suppress their pulverization and achieve high reversibility. This work contributes to a new strategy to design the structure of long-cycling anode materials for highly stable lithium-ion batteries.
Collapse
|
32
|
Hierarchical N-doped graphene coated 1D cobalt oxide microrods for robust and fast lithium storage at elevated temperature. Electrochim Acta 2019. [DOI: 10.1016/j.electacta.2019.04.115] [Citation(s) in RCA: 44] [Impact Index Per Article: 8.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/10/2023]
|
33
|
Study of expression levels and clinical significance of miR-503 and miR-375 in patients with esophageal squamous cell carcinoma. EUROPEAN REVIEW FOR MEDICAL AND PHARMACOLOGICAL SCIENCES 2019; 23:3799-3805. [PMID: 31115006 DOI: 10.26355/eurrev_201905_17806] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
Abstract
OBJECTIVE This study aims to investigate the expression levels and clinical significance of miR-503 and miR-375 in patients with esophageal squamous cell carcinoma. PATIENTS AND METHODS 40 cases of cancer tissues and adjacent tissues in patients with esophageal squamous cell carcinoma were collected from March 2017 to September 2017 in the Department of Gastroenterology in the First Affiliated Hospital of Henan Polytechnic University. qRT-PCR was used to analyze the expressions of miR-503 and miR-375 in cancer tissues and adjacent normal tissues. The association between their expressions and the gender, age, degree of tumor differentiation, TNM staging, presence or absence of lymph node metastasis, and other clinicopathological characteristics of patients with esophageal squamous cell carcinoma was analyzed. RESULTS The results showed that the expression level of miR-503 in esophageal squamous cell carcinoma tissues (6.83±2.14) was significantly higher than that in adjacent tissues (2.45±1.13). The expression level of miR-375 in esophageal squamous cell carcinoma tissues (3.75±1.06) was significantly lower than that in adjacent tissues (7.45±1.13). The expression levels of miR-503 and miR-375 in esophageal squamous cell carcinoma were related to the existence of lymph node metastasis, degree of differentiation of esophageal squamous cell carcinoma and TNM staging (p<0.001). There was no correlation between the expressions of miR-503 and miR-375 and the age, gender and tumor size of patients (p>0.05). CONCLUSIONS miR-503 was highly expressed in esophageal squamous cell carcinoma and miR-375 was lowly expressed in esophageal squamous cell carcinoma. miR-503 and miR-375 were closely related to the lymphatic metastasis, degree of differentiation and TNM staging of the tumor.
Collapse
|
34
|
Author Correction: Evolution of the electrochemical interface in sodium ion batteries with ether electrolytes. Nat Commun 2019; 10:1248. [PMID: 30867413 PMCID: PMC6416291 DOI: 10.1038/s41467-019-09129-6] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Download PDF] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022] Open
|
35
|
Constructing Effective Interfaces for Li 1.5Al 0.5Ge 1.5(PO 4) 3 Pellets To Achieve Room-Temperature Hybrid Solid-State Lithium Metal Batteries. ACS APPLIED MATERIALS & INTERFACES 2019; 11:9911-9918. [PMID: 30730128 DOI: 10.1021/acsami.8b20413] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/09/2023]
Abstract
Solid electrolytes are considered as strong alternatives for conventional liquid electrolytes to overcome the safety issues of next-generation high-energy-density lithium metal batteries (LMBs). Although Li1.5Al0.5Ge1.5(PO4)3 (LAGP) has satisfied ionic conductivity at room temperature (∼10-4 S cm-1), high stability in air, and can be easily sintered, it still suffers from instability of the lithium metal. Moreover, the large interfacial resistance between solid electrolytes and solid electrodes and the stress generated by the volumetric change of lithium metal anodes during cycling would deteriorate the performance of LMBs. Here, we report an effective solution to overcome the abovementioned problems by introducing a three-dimensional gel polymer electrolyte at the interface between LAGP pellets and lithium metal anodes, achieving stable cycling of LiFePO4//Li cells at room temperature for 300 cycles. Besides, the degeneration mechanisms of the interfaces of LAGP pellets under different conditions are compared, and peculiar properties different from their counterparts were found.
Collapse
|
36
|
Evolution of the electrochemical interface in sodium ion batteries with ether electrolytes. Nat Commun 2019; 10:725. [PMID: 30760713 PMCID: PMC6374418 DOI: 10.1038/s41467-019-08506-5] [Citation(s) in RCA: 109] [Impact Index Per Article: 21.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/09/2018] [Accepted: 01/11/2019] [Indexed: 12/24/2022] Open
Abstract
Ether based electrolytes have surfaced as alternatives to conventional carbonates allowing for enhanced electrochemical performance of sodium-ion batteries; however, the primary source of the improvement remains poorly understood. Here we show that coupling titanium dioxide and other anode materials with diglyme does enable higher efficiency and reversible capacity than those for the combination involving ester electrolytes. Importantly, the electrolyte dependent performance is revealed to be the result of the different structural evolution induced by a varied sodiation depth. A suit of characterizations show that the energy barrier to charge transfer at the interface between electrolyte and electrode is the factor that dominates the interfacial electrochemical characteristics and therefore the energy storage properties. Our study proposes a reliable parameter to assess the intricate sodiation dynamics in sodium-ion batteries and could guide the design of aprotic electrolytes for next generation rechargeable batteries. Sodium ion batteries are known to benefit from the use of ether electrolytes. Here the authors reveal the origin showing that the energy barrier of charge transfer at the electrolyte/electrode interface dominates the interfacial electrochemical characteristics and is favorably small.
Collapse
|
37
|
sp–sp2 hybrid-conjugated microporous polymer-derived Pd-encapsulated porous carbon materials for lithium–sulfur batteries. Chem Commun (Camb) 2019; 55:10084-10087. [DOI: 10.1039/c9cc03678d] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Pd-encapsulated porous carbon materials for high performance Li–S battery were prepared by coupling polymerization of an aryl halide and aryl alkyne under mild conditions.
Collapse
|
38
|
|
39
|
Foliar application of Zn can reduce Cd concentrations in rice (Oryza sativa L.) under field conditions. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2018; 25:29287-29294. [PMID: 30121759 DOI: 10.1007/s11356-018-2938-6] [Citation(s) in RCA: 21] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/22/2018] [Accepted: 08/07/2018] [Indexed: 06/08/2023]
Abstract
Cadmium (Cd) pollution in rice and its transfer to food chain are cause of global concern. Application of zinc (Zn) can reduce Cd uptake by plants, as both these metals are generally antagonistic in soil-plant systems. In a field experiment on Cd-contaminated acid soil, we investigated the effectiveness of foliar application of Zn in minimizing Cd accumulation and its effect on the content of mineral nutrient elements in rice. The treatment was done at an early grain filling stag using 0.3 and 0.5% w/v ZnSO4·7H2O solution. The spray did not affect the grain yield of rice but decreased the Cd concentration in the root, straw, husk, and brown rice to some extent and increased the Zn concentration. Foliar application of 0.5% ZnSO4 resulted in maximum Zn concentration and minimum Cd concentration in brown rice. However, the concentrations of P, K, Ca, Mg, Cu, and Mn in brown rice were not affected. The correlation between Cd and Zn concentrations in brown rice, husk, and root was significantly negative, and that between Cd and Mn concentrations in brown rice was significantly positive. The inhibition of Cd uptake resulted in a decrease in its concentration in brown rice after the treatments. Thus, the foliar application of a suitable concentration of Zn at the early grain filling stage could effectively minimize the Cd concentration while enhancing the Zn concentration in brown rice on Cd-contaminated acid soil.
Collapse
|
40
|
P4633Novel risk model for predicting acute adverse drug reactions following cardiac catheterization from TRUST study (the safety and tolerability of ultravist in patients undergoing cardiac catheterization. Eur Heart J 2018. [DOI: 10.1093/eurheartj/ehy563.p4633] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 11/14/2022] Open
|
41
|
Hollow SnO 2 nanospheres with oxygen vacancies entrapped by a N-doped graphene network as robust anode materials for lithium-ion batteries. NANOSCALE 2018; 10:11460-11466. [PMID: 29888359 DOI: 10.1039/c8nr02290a] [Citation(s) in RCA: 41] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
The practical application of tin dioxide (SnO2) in lithium-ion batteries has been greatly hindered by its large volumetric expansion and low conductivity. Thus, a rational design of the size, geometry and the pore structure of SnO2-based nanomaterials is still a dire demand. To this end, herein we report an effective approach for engineering hollow-structured SnO2 nanospheres with adequate surface oxygen vacancies simultaneously wrapped by a nitrogen-doped graphene network (SnO2-x/N-rGO) through an electrostatic adsorption-induced self-assembly together with a thermal reduction process. The close electrostatic attraction achieved a tight and uniform combination of positively charged SnO2 nanospheres with negatively charged graphene oxide (GO), which can alleviate the aggregation and volume expansion of the entrapped SnO2 nanospheres. Subsequent thermal treatment not only ensures a significant reduction of the GO sheets accompanying nitrogen-doping, but also induces the generation of oxygen vacancies on the surface of the SnO2 hollow nanospheres, together building up a long-range and bicontinuous transfer channel for rapid electron and ion transport. Because of these structural merits, the as-built SnO2-x/N-rGO composite used as the anode material exhibits excellent robust cycling stability (∼912 mA h g-1 after 500 cycles at 0.5 A g-1 and 652 mA h g-1 after 200 cycles at 1 A g-1) and superior rate capability (309 mA h g-1 at 10 A g-1). This facile fabrication strategy may pave the way for the construction of high performance SnO2-based anode materials for potential application in advanced lithium-ion batteries.
Collapse
|
42
|
Spherical Li Deposited inside 3D Cu Skeleton as Anode with Ultrastable Performance. ACS APPLIED MATERIALS & INTERFACES 2018; 10:20244-20249. [PMID: 29862819 DOI: 10.1021/acsami.8b04881] [Citation(s) in RCA: 32] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Porous current collectors are conducive to enhance the property of Li metal anode. Unfortunately, congestion in diffusion path during plating process damages the effects of current collectors. Herein, we developed a 3D Cu skeleton with open micrometer-sized pores by NaCl-assisted powder-sintering method. The unobstructed pores of 3D Cu skeleton help to reduce congestion during plating, thus most of Li deposited inside the current collector. Besides, the large smooth surface promotes the deposition of Li with smooth spherical shape, which mitigating Li dendrite growth. As a result, better safety and rechargeability of Li metal anode were achieved in this design.
Collapse
|
43
|
High-Level Heteroatom Doped Two-Dimensional Carbon Architectures for Highly Efficient Lithium-Ion Storage. Front Chem 2018; 6:97. [PMID: 29686985 PMCID: PMC5900749 DOI: 10.3389/fchem.2018.00097] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/16/2018] [Accepted: 03/20/2018] [Indexed: 11/13/2022] Open
Abstract
In this work, high-level heteroatom doped two-dimensional hierarchical carbon architectures (H-2D-HCA) are developed for highly efficient Li-ion storage applications. The achieved H-2D-HCA possesses a hierarchical 2D morphology consisting of tiny carbon nanosheets vertically grown on carbon nanoplates and containing a hierarchical porosity with multiscale pore size. More importantly, the H-2D-HCA shows abundant heteroatom functionality, with sulfur (S) doping of 0.9% and nitrogen (N) doping of as high as 15.5%, in which the electrochemically active N accounts for 84% of total N heteroatoms. In addition, the H-2D-HCA also has an expanded interlayer distance of 0.368 nm. When used as lithium-ion battery anodes, it shows excellent Li-ion storage performance. Even at a high current density of 5 A g-1, it still delivers a high discharge capacity of 329 mA h g-1 after 1,000 cycles. First principle calculations verifies that such unique microstructure characteristics and high-level heteroatom doping nature can enhance Li adsorption stability, electronic conductivity and Li diffusion mobility of carbon nanomaterials. Therefore, the H-2D-HCA could be promising candidates for next-generation LIB anodes.
Collapse
|
44
|
Positive film-forming effect of fluoroethylene carbonate (FEC) on high-voltage cycling with three-electrode LiCoO2/Graphite pouch cell. Electrochim Acta 2018. [DOI: 10.1016/j.electacta.2018.02.151] [Citation(s) in RCA: 39] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
45
|
Synthesis of Hierarchical Sisal-Like V 2O 5 with Exposed Stable {001} Facets as Long Life Cathode Materials for Advanced Lithium-Ion Batteries. ACS APPLIED MATERIALS & INTERFACES 2017; 9:43681-43687. [PMID: 29148697 DOI: 10.1021/acsami.7b13944] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
Vanadium pentoxide (V2O5) is considered a promising cathode material for advanced lithium-ion batteries owing to its high specific capacity and low cost. However, the application of V2O5-based electrodes has been hindered because of their inferior conductivity, cycling stability, and power performance. Herein, hierarchical sisal-like V2O5 microstructures consisting of primary one-dimensional (1D) nanobelts with [001] facets orientation growth and rich oxygen vacancies are synthesized through a facile hydrothermal process using polyoxyethylene-20-cetyl-ether as the surface control agent, followed by calcination. The primary 1D nanobelt shortens the transfer path of electrons and ions, and the stable {001} facets could reduce the side reaction at the interface of electrode/electrolyte, simultaneously. Moreover, the formation of low valence state vanadium would generate the oxygen vacancies to facilitate lithium-ion diffusion. As a result, the sisal-like V2O5 manifests excellent electrochemical performances, including high specific capacity (297 mA h g-1 at a current of 0.1 C) and robust cycling performance (capacity fading 0.06% per cycle). This work develops a controllable method to craft the hierarchical sisal-like V2O5 microstructures with excellent high rate and long-term cyclic stability.
Collapse
|
46
|
A Stable Cross-Linked Binder Network for SnO2
Anode with Enhanced Sodium-Ion Storage Performance. ChemistrySelect 2017. [DOI: 10.1002/slct.201702273] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
|
47
|
In-situ polymerized lithium polyacrylate (PAALi) as dual-functional lithium source for high-performance layered oxide cathodes. Electrochim Acta 2017. [DOI: 10.1016/j.electacta.2017.07.170] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
|
48
|
Dendrite-Free, High-Rate, Long-Life Lithium Metal Batteries with a 3D Cross-Linked Network Polymer Electrolyte. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2017; 29. [PMID: 28145599 DOI: 10.1002/adma.201604460] [Citation(s) in RCA: 246] [Impact Index Per Article: 35.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/21/2016] [Revised: 11/03/2016] [Indexed: 05/08/2023]
Abstract
A 3D network gel polymer electrolyte (3D-GPE) is designed for lithium metal batteries and prepared by an initiator-free one-pot ring-opening polymerization technique. This 3D-GPE exhibits an unprecedented combination of mechanical strength, ionic conductivity, and more importantly, effective suppression of Li dendrite growth. The produced lithium-based battery presents long life, high rate, and excellent safety.
Collapse
|
49
|
Suppressing Self-Discharge and Shuttle Effect of Lithium-Sulfur Batteries with V 2 O 5 -Decorated Carbon Nanofiber Interlayer. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2017; 13:1602539. [PMID: 28084672 DOI: 10.1002/smll.201602539] [Citation(s) in RCA: 39] [Impact Index Per Article: 5.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/31/2016] [Revised: 11/18/2016] [Indexed: 05/23/2023]
Abstract
V2 O5 decorated carbon nanofibers (CNFs) are prepared and used as a multifunctional interlayer for a lithium-sulfur (Li-S) battery. V2 O5 anchored on CNFs can not only suppress the shuttle effect of polysulfide by the strong adsorption and redox reaction, but also work as a high-potential dam to restrain the self-discharge behavior in the battery. As a result, Li-S batteries with a high capacity and long cycling life can be stored and rested for a long time without obvious capacity fading.
Collapse
|
50
|
Abstract
An in-depth understanding of (de)lithiation induced phase transition in electrode materials is crucial to grasp their structure-property relationships and provide guidance to the design of more desirable electrodes. By operando synchrotron XRD (SXRD) measurement and Density Functional Theory (DFT) based calculations, we discover a reversible first-order phase transition for the first time during (de)lithiation of CeO2 nanoparticles. The LixCeO2 compound phase is identified to possess the same fluorite crystal structure with FM3M space group as that of the pristine CeO2 nanoparticles. The SXRD determined lattice constant of the LixCeO2 compound phase is 0.551 nm, larger than that of 0.541 nm of the pristine CeO2 phase. The DFT calculations further reveal that the Li induced redistribution of electrons causes the increase in the Ce-O covalent bonding, the shuffling of Ce and O atoms, and the jump expansion of lattice constant, thereby resulting in the first-order phase transition. Discovering the new phase transition throws light upon the reaction between lithium and CeO2, and provides opportunities to the further investigation of properties and potential applications of LixCeO2.
Collapse
|