Navigating the development of silver nanoparticles based food analysis through the power of artificial intelligence

In the ongoing pursuit of enhancing food safety and quality through advanced technologies, silver nanoparticles (AgNPs) stand out for their antimicrobial properties. Despite being overshadowed by other nanoparticles in food sensing applications, AgNPs possess inherent qualities that make them effective tools for rapid and selective contaminant detection in food matrices. This review aims to reinvigorate the interest in AgNPs in the food industry, emphasizing their sensing mechanism and the transformative potential of integrating them with artificial intelligence (AI) for enhanced food safety monitoring. It discusses key AI tools and principles in the food industry, demonstrating their positive impact on food analytical chemistry. The interplay between AI and biosensors offers many advantages and adaptability to dynamic analytical challenges, significantly improving food safety monitoring and potentially redefining the landscape of food safety and quality assurance.

Formation mechanism of a novel core-shell with tetradecyl dimethyl benzyl ammonium-modified montmorillonite interlayer nanofibrous membrane and its antimicrobial properties

A novel core-shell with a tetradecyl dimethyl benzyl ammonium chloride-modified montmorillonite (TDMBA/MMT) interlayer silk fibroin (SF)/poly(lactic acid) (PLLA) nanofibrous membrane was fabricated using a simple conventional electrospinning method. Scanning electron microscopy and pore size analyses revealed that this core-shell with TDMBA/MMT interlayer maintained its nanofibrous morphology and larger pore structure more successfully than SF/PLLA nanofibrous membranes after treatment with 75% ethanol vapor. Transmission electron microscopy and energy-dispersive X-ray spectroscopy analyses testified that the SF/PLLA-TDMBA/MMT nanofibers exhibited a core-shell with an interlayer structure, with SF/PLLA in the core-shell layer and TDMBA/MMT in the interlayer. The formation of a core-shell with interlayer nanofibers was primarily attributed to the uniform dispersion of TDMBA/MMT nanosheets in a solution owing to its exfoliation using hexafluoroisopropanol and then preparing a stable spinning solution similar to an emulsion. Compared to SF/PLLA nanofibrous membranes, the core-shell structure with TDMBA/MMT interlayers of SF/PLLA nanofibrous membranes exhibited enhanced hydrophilicity, thermal stability, mechanical properties as well as improved and long-lasting antimicrobial performance against Escherichia coli and Staphylococcus aureus without cytotoxicity.

Silver-loaded poly(vinyl alcohol)/polycaprolactone polymer scaffold as a biocompatible antibacterial system

A chronic nonhealing wound poses a significant risk for infection and subsequent health complications, potentially endangering the patient's well-being. Therefore, effective wound dressings must meet several crucial criteria, including: (1) eliminating bacterial pathogen growth within the wound, (2) forming a barrier against airborne microbes, (3) promoting cell proliferation, (4) facilitating tissue repair. In this study, we synthesized 8 ± 3 nm Ag NP with maleic acid and incorporated them into an electrospun polycaprolactone (PCL) matrix with 1.6 and 3.4 µm fiber sizes. The Ag NPs were anchored to the matrix via electrospraying water-soluble poly(vinyl) alcohol (PVA), reducing the average sphere size from 750 to 610 nm in the presence of Ag NPs. Increasing the electrospraying time of Ag NP-treated PVA spheres demonstrated a more pronounced antibacterial effect. The resultant silver-based material exhibited 100% inhibition of gram-negative Escherichia coli and gram-positive Staphylococcus aureus growth within 6 h while showing non-cytotoxic effects on the Vero cell line. We mainly discuss the preparation method aspects of the membrane, its antibacterial properties, and cytotoxicity, suggesting that combining these processes holds promise for various medical applications.

Graphene as a promising material in orthodontics: A review

Graphene is an extraordinary material with unique mechanical, chemical, and thermal properties. Additionally, it boasts high surface area and antimicrobial properties, making it an attractive option for researchers exploring innovative materials for biomedical applications. Although there have been various studies on graphene applications in different biomedical fields, limited reviews have been conducted on its use in dentistry, and no reviews have focused on its application in the orthodontic field. This review aims to present a comprehensive overview of graphene-based materials, with an emphasis on their antibacterial mechanisms and the factors that influence these properties. Additionally, the review summarizes the dental applications of graphene, spotlighting the studies of its orthodontic application as they can be used to enhance the antibacterial and mechanical properties of orthodontic materials such as adhesives, archwires, and splints. Also, they can be utilized to enhance bone remodeling during orthodontic tooth movement. An electronic search was carried out in Scopus, PubMed, Science Direct, and Wiley Online Library digital database platforms using graphene and orthodontics as keywords. The search was restricted to English language publications without a time limit. This review highlights the need for further laboratory and clinical research using graphene-based materials to improve the properties of orthodontic materials to make them available for clinical use.

Preparation of Ag@3D-TiO2 Scaffolds and Determination of its Antimicrobial Properties and Osteogenesis-promoting Ability

OBJECTIVES

The micro-nano structure of 3D-printed porous titanium (Ti) alloy with excellent performance in avoiding stress shielding and promoting bone tissue differentiation provides a new opportunity for the development of bone implants, but it necessitates higher requirements for bone tissue differentiation and the antibacterial properties of bone implants in clinical practice.

METHODS

This study investigated the preparation, antimicrobial properties, and osteogenesis-promoting ability of the 3D printed porous Ti alloy anodic oxidized Ag-carrying (Ag@3D-TiO2) scaffolds. The 3D printed porous Ti alloy (3D-Ti), anodized 3D printed porous Ti alloy (3D-TiO2), and Ag@3D-TiO2 scaffolds were synthesized using electron beam melting. The antimicrobial properties of the scaffolds were examined using antibacterial tests and their cytocompatibility was assessed using a cell proliferation assay and acridine orange/ethidium bromide (AO/EB) staining. In vitro cellular assays were used to investigate the effects of the scaffold microstructural features on cell activity, proliferation, and osteogenesis-related genes and proteins. In vivo animal experiments were used to evaluate the anti-inflammatory and osteogenesis-promoting abilities of the scaffolds.

RESULTS

The Ag@3D-TiO2 scaffolds exhibited sustained anti-microbial activity over time, enhanced cell proliferation, facilitated osteogenic differentiation, and increased extracellular matrix mineralization. In addition, alkaline phosphatase (ALP), collagen type I (COL-I), and osteocalcin (OCN)-related genes and proteins were upregulated. In vivo animal implantation experiments, the anti-inflammatory effect of the Ag@3D-TiO2 scaffolds were observed using histology, and a large amount of fibrous connective tissue was present around it; the Ag@3D-TiO2 scaffolds were more bio-compatible with the surrounding tissues compared with 3D-Ti and 3D-TiO2; a large amount of uniformly distributed neoplastic bone tissue existed in their pores, and the chronic systemic toxicity test showed that the 3D-Ti, 3D-TiO2, and Ag@3D-TiO2 scaffolds are biologically safe.

CONCLUSION

The goal of this study was to create a scaffold that exhibits antimicrobial properties and can aid bone growth, making it highly suitable for use in bone tissue engineering.

Valorization of edible films based on chitosan/hydroxyethyl cellulose/olive leaf extract and TiO2-NPs for preserving sour cream

Biodegradable edible films for sour cream packaging were developed based on chitosan (CS), hydroxyethyl cellulose (HEC), Olive leaf extract (OE), and titanium dioxide nanoparticles (TiO2-NPs). The prepared CS/HEC/TiO2-OE bionanocomposite films were evaluated for their antimicrobial and antioxidant activities as well as using FT-IR, mechanical, permeability, and contact angle. The effect of developed films on the lipid oxidation, microbiological load, and chemical properties of sour cream was investigated. The fabricated films had an antimicrobial impact against all tested strains. The film containing 8 % OE showed effective protection against fat oxidation, with a peroxide value of 3.21 meq O2/kg, a para-anisidine value 5.40, and free fatty acids of 0.82 mg KOH/kg. The films with OE 4 % and 8 % have a good effect on the microbiological load of sour cream for 90 days. These films did not influence the chemical composition of sour cream and therefore can be used in this sort of dairy product.

Bio-nanocomposite active packaging films based on carboxymethyl cellulose, myrrh gum, TiO2 nanoparticles and dill essential oil for preserving fresh-fish (Cyprinus carpio) meat quality

This study developed a composite film for packaging refrigerated common carp fillets using carboxymethyl cellulose (CMC) (1.5 % w/v)/Myrrh gum (MG) (0.25 % w/v) base with the addition of titanium dioxide nanoparticles (TiO2 NPs) (0.25 %, 0.5 %, and 1 %) and Dill essential oil (DEO) (1.5 %, 2.25 %, and 3 %). The film was produced using a casting method and optimized for mechanical and barrier properties. The incorporation of DEO and TiO2 NPs into CMC/MG composite films significantly reduced moisture content (MC) and water vapor permeability (WVP), improved their tensile strength (TS), and increased their antimicrobial and antioxidant properties. Moreover, MG can improve the physicomechanical properties of the CMC/MG composite films. The film components had good compatibility without significant aggregation or cracks. In conclusion, the optimized CMC/MG (1.5 %/0.25 %) film containing TiO2 NPs (0.5 %), and DEO (2.25 %) has the best overall performance and can be a good source for making edible film. Functionally, this bioactive nanocomposite film significantly increased the shelf life of refrigerated fish fillet samples for 12 days by inhibiting microbial growth and reducing the oxidation rate compared to the control sample. The knowledge obtained from this study can guide the development of bio-nanocomposite and biodegradable food packaging films based on CMC/MG to increase the shelf life of food products and environmental protection.

Development of CO2-sensitive antimicrobial bilayer films based on gellan gum and sodium alginate/sodium carboxymethyl cellulose and its application in strawberries

To effectively extend the shelf life of fruits meanwhile facilitating consumers to judge their freshness, in this work, a double-layer multifunctional film combining CO2 sensitivity and antibacterial properties was successfully prepared by adding methyl red (MR), bromothymol blue (BTB) into gellan gum (GG) as the sensing inner layer, and doping tannic acid (TA) into sodium alginate with sodium carboxymethyl cellulose (CMC) as the antimicrobial outer layer, which was applied to the freshness indication of strawberries. Microscopic morphology and spectral analysis demonstrated that the bi-layer films were fabricated successfully. The mechanical characteristics, thermal stability, water vapor resistance, and antibacterial capabilities of the bilayer films improved as TA concentration rose. They exhibited noticeable color changes at pH = 2-10 and different concentrations of CO2. Application of the prepared films to strawberries revealed that the GG-MB@SC-6%TA film performed most favorably under 4 °C storage conditions, not only monitoring strawberry freshness but also retaining high soluble solids and titratable acidity, resulting in a slight decrease in hardness and weight loss. Therefore, taking into account all of the physical-functional characteristics, the GG-MB@6%TA film has a broad application prospect for intelligent food packaging.

Comparative study between three carbonaceous nanoblades and nanodarts for antimicrobial applications

The design of nanostructured materials occupies a privileged position in the development and management of affordable and effective technology in the antibacterial sector. Here, we discuss the antimicrobial properties of three carbonaceous nanoblades and nanodarts materials of graphene oxide (GO), reduced graphene oxide (RGO), and single-wall carbon nanotubes (SWCNTs) that have a mechano-bactericidal effect, and the ability to piercing or slicing bacterial membranes. To demonstrate the significance of size, morphology and composition on the antibacterial activity mechanism, the designed nanomaterials have been characterized. The minimum inhibitory concentration (MIC), standard agar well diffusion, and transmission electron microscopy were utilized to evaluate the antibacterial activity of GO, RGO, and SWCNTs. Based on the evidence obtained, the three carbonaceous materials exhibit activity against all microbial strains tested by completely encapsulating bacterial cells and causing morphological disruption by degrading the microbial cell membrane in the order of RGO > GO > SWCNTs. Because of the external cell wall structure and outer membrane proteins, the synthesized carbonaceous nanomaterials exhibited higher antibacterial activity against Gram-positive bacterial strains than Gram-negative and fungal microorganisms. RGO had the lowest MIC values (0.062, 0.125, and 0.25 mg/mL against B. subtilis, S. aureus, and E. coli, respectively), as well as minimum fungal concentrations (0.5 mg/mL for both A. fumigatus and C. albicans). At 12 hr, the cell viability values against tested microbial strains were completely suppressed. Cell lysis and death occurred as a result of severe membrane damage caused by microorganisms perched on RGO nanoblades. Our work gives an insight into the design of effective graphene-based antimicrobial materials for water treatment and remediation.

Nanoparticles in Preventing Biofilm Formation on Orthodontic Brackets: Clinical Study

This study investigates the effectiveness of nanoparticles in preventing the formation of biofilms on orthodontic brackets. Biofilm formation is a common concern during orthodontic treatment, as it can lead to oral health issues.

Materials and Methods

The study utilized a randomized controlled trial design. The participants were divided into two groups: the experimental group and the control group. The experimental group received orthodontic brackets coated with nanoparticles, while the control group received regular brackets. The patients' oral hygiene was monitored, and plaque index scores were recorded at specific intervals.

Results

The results of this study demonstrated a significant difference in biofilm formation between the two groups. The experimental group, which had orthodontic brackets with nanoparticle coatings, exhibited a lower plaque index compared to the control group. The mean plaque index score difference was statistically significant (P < 0.05), indicating that the nanoparticles effectively reduced biofilm formation on orthodontic brackets.

Conclusion

In conclusion, the findings of this clinical study suggest that the utilization of nanoparticles as coatings for orthodontic brackets can be an effective approach to prevent biofilm formation.

One-step silver coating of polypropylene surgical mask with antibacterial and antiviral properties

Face masks can filter droplets containing viruses and bacteria minimizing the transmission and spread of respiratory pathogens but are also an indirect source of microbes transmission. A novel antibacterial and antiviral Ag-coated polypropylene surgical mask obtained through the in situ and one-step deposition of metallic silver nanoparticles, synthesized by silver mirror reaction combined with sonication or agitation methods, is proposed in this study. SEM analysis shows Ag nanoparticles fused together in a continuous and dense layer for the coating obtained by sonication, whereas individual Ag nanoparticles around 150 nm were obtained combining the silver mirror reaction with agitation. EDX, XRD and XPS confirm the presence of metallic Ag in both coatings and also oxidized Ag in samples by agitation. A higher amount of Ag nanoparticles is deposited on samples by sonication, as calculated by TGA. Further, both coatings are biocompatible and show antibacterial properties: coating by sonication caused 24 % and 40 % of bacterial reduction while coating by agitation 48 % and 96 % against S. aureus and E. coli, respectively. At 1 min of contact with SARS-CoV-2, the coating by agitation has an antiviral capacity of 75 % against 24 % of the one by sonication. At 1 h, both coatings achieve 100 % of viral inhibition. Nonetheless, larger samples could be produced only through the silver mirror reaction combined with agitation, preserving the integrity of the mask. In conclusion, the silver-coated mask produced by silver mirror reaction combined with agitation is scalable, has excellent physico-chemical characteristics as well as significant biological properties, with higher antimicrobial activities, providing additional protection and preventing the indirect transmission of pathogens.

Physical stability, microstructure and antimicrobial properties of konjac glucomannan coatings enriched with Litsea cubeba essential oil nanoemulsion and its effect on citruses preservation

This study purposed to develop konjac glucomannan (KGM) based antimicrobial coatings containing Litsea cubeba essential oil nanoemulsion (LNE) for citruses preservation. Physical stability, rheological, structural and antimicrobial properties of the coating solutions were investigated, along with the release characteristics of Litsea cubeba essential oil (LCO). Results showed that the coating solutions displayed shear thinning behavior. The oil droplets were distributed homogeneously in KGM phase with good stability. The coating structure became loose with increasing LNE content due to LNE interfering with molecular interactions and entanglement of KGM. The coating solutions showed stronger antibacterial activity against Escherichia coli than against Staphylococcus aureus and were effective in inhibiting the growth of Penicillium italicum on citrus surfaces. KGM-LNE 10 negatively affected citruses due to phytotoxicity caused by high levels of LCO. LCO was released slowly and continuously from the coatings, and its release was faster in deionized water than in an ethanol-water solution. KGM-LNE 2.5 coated citruses had the least weight loss, the greatest hardness, and kept the minimum changes in total soluble solids, total acid and vitamin C content, implying that KGM-LNE 2.5 best maintained the quality of citruses. The findings suggest that KGM-based coatings containing LNE have high potential for citruses preservation.

Furoic acid-mediated konjac glucomannan/flaxseed gum based green biodegradable antibacterial film for Shine-Muscat grape preservation

Considering the growing threats to the environment and human health, such as plastic pollution and food spoilage, the development of naturally antibacterial food packaging materials with biodegradable capabilities has recently attracted considerable attention. This work applies the concept of green environmental protection to packaging technology, and a new type of green edible antibacterial packaging film was developed. The basic idea is to incorporate furoic acid (FA), which possesses excellent antibacterial activity, into the flaxseed gum and konjac glucomannan matrix (FK) as a filler to obtain a series of FK-FA bioactive films. This incorporation simultaneously improves the hydrophobicity and UV-barrier ability by 12.28 % and 42.87 %, respectively. Meanwhile, the diameters of the antibacterial zone of the FK-FA0.4% films (composite FK films containing 0.4 % FA) against E. coli and S. aureus increased to 38.98 mm and 36.29 mm from 24.00 mm of pure FK film, respectively. As a consequence, the grape sample sealed with FK-FA0.4% film remained edible on the 18th day of storage, while those packaged with commercial PE film and pure FK were seriously rotted and lost edible value on the 12th day, further confirming the enhanced preservation capacity. Finally, the as-prepared films were established to be biodegradable and were almost completely degraded within 25 days under simulated environmental conditions. Overall, these promising results show the potential of FK-FA films for replacing plastic packaging materials as eco-friendly edible films with prolonged shelf life for active packaging.

The effect of essential oil of Zataria multiflora incorporated chitosan (free form and Pickering emulsion) on microbial, chemical and sensory characteristics in salmon (Salmo trutta)

The objective of current research was to prepare a new biodegradable coating containing chitosan (Ch) and zataria multiflora essential oil (ZMEO) (free and Pickering emulsion (PEO) forms), in order to enhance the Salmo trutta shelf life. Our results showed, the mean of films thickness, mechanical properties (elastic modulus (EM) and tensile strength (TS) analysis) and WVP in different treatments were ranged from 0.103 ± 0.003 (for Ch) to 0.109 ± 0.003 (for Ch-PEO (2.5 %)) µm for thickness, from 3.2 ± 1.6 (for Ch) to 8.15 ± 2.3 (for Ch-EO) MPa for EM, from 1.3 ± 0.5 (for Ch-EO) to 1.6 ± 0.06 (for Ch) Mpa for TS and from 0.1 ± 0.02 (for Ch) to 0.8 ± 0.05 (for Ch-EO) (×10 - 11(g m/m2 s Pa) for WVP. In current research, the lowest and highest total viable counts (TVC) was related to Ch-PEO (1.7 log CFU/g) and control treatments (4.65 log CFU/g). The lowest and highest of pH was related to the Ch-PEO (6.45) and the control (7.1), the lowest and highest of PV (peroxide value) was related to Ch-PEO (0.34 meq/kg) and control treatment (1.37 meq/kg), the lowest and highest of TBARS (thiobarbituric acid reactive substances) was related to Ch-PEO (0.37 mg/kg) and control treatment (2.23 mg/kg) and also the lowest and highest of TVB-N (total volatile base nitrogen) was related to Ch-PEO (17.7 mg) and control (59 mg). Also, Ch-PEO showed the best sensory properties after sixteen days. Among all the treatments in all the tests, the best maintenance property was related to the Ch-PEO, therefore, chitosan coatings containing ZM Pickering emulsion should be considered as a potential active coating in the fish industry.

Antibacterial mechanism of lignin and lignin-based antimicrobial materials in different fields

The control of microbial infection transmission often relies on the utilization of synthetic and metal-based antimicrobial agents. However, their non-biodegradability and inadequate disposal practices lead to significant environmental contamination. To address this concern, the quest for natural alternatives has gained paramount importance. Lignin, a widely available renewable aromatic compound, emerges as a promising candidate owing to its inherent phenolic moiety, which lends itself well to acting as a natural antimicrobial agent either independently or in combination with other agents. This article provides a comprehensive account of the structure and primary classes of lignin. Additionally, it elucidates the antimicrobial mechanism of lignin, the factors influencing its efficacy, and the methods employed for its detection. Moreover, it describes the progress made in developing the antimicrobial capacity of lignin in different areas. In conclusion, this paper not only outlines the current state of research on the antimicrobial function of lignin, but also identifies challenges and future possibilities for enhancing its antimicrobial properties. This work holds great significance in the ongoing endeavor to contribute to high-impact research on natural alternatives for controlling infections and fostering environmentally conscious practices.

An influence of molecular weight, deacetylation degree of chitosan xerogels on their antimicrobial activity and cytotoxicity. Comparison of chitosan materials obtained using lactic acid and CO2 saturation

This paper presents a comparison of the antimicrobial activity and cytotoxicity against L929 cells of chitosan xerogels prepared by dissolving the polymer in a solution of lactic acid (LA) or carbonic acid (CO2) and then freeze-drying. There was no simple relationship between the antimicrobial activity and cytotoxicity of the samples obtained using both techniques (LA and CO2). Chitosan materials obtained by the LA method in a 1:1 dilution were characterized by the highest cytotoxicity against L929 cells (∼20%). For the same diluted samples prepared using the CO2 saturation method, the viability of L929 cells was approximately 2.5 times greater. Some of the tested chitosan materials obtained by the innovative method were characterized by significantly lower antimicrobial activity, for example, reduction of E. coli bacteria for MMW-LA and MMW-CO2 samples by 6.00 and 0.75 logarithmic order, respectively. This clearly indicates that in many applications, the presence of the acid necessary to dissolve chitosan is responsible for the antimicrobial activity of the polymer solution and its products.

New coating containing chitosan and Hyssopus officinalis essential oil (emulsion and nanoemulsion) to protect shrimp (Litopenaeus vannamei) against chemical, microbial and sensory changes

In this study, the effect of chitosan coating containing emulsion and nanoemulsion of Hyssopus officinalis essential oil (EO) on the chemical, microbiological and sensory characteristics of shrimp (Litopenaeus vannamei) was investigated. The minimum value of TVB-N (Total volatile basic nitrogen), TBARS (Thiobarbituric acid reactive substances), PV (peroxide value), TMA-N (Trimethylamine-nitrogen) and FFA (Free fatty acids) after 12 days were shown in NE + HEO 1% (coating containing chitosan with nanoemulsion of EO) with 20.53 mg N/100 g, 0.5 µg/kg, 0.88 MAQ peroxide/kg, 1.3 mg/100 g and 12.16 mg 100% of oleic acid, respectively. Also, minimum value of pH after 12 days was related to the CE + HEO 1% (coating containing chitosan with emulsion of EO) with 7.60. The minimum value of psychrophilic and mesophilic microbial count after 12 days were shown in NE + HEO 1%, 4.40 ± 0.36 and 4.03 ± 0.06 cfu/g, respectively. The best score of sensory evaluation was observed in the NE-HEO 1% treatment. As a result, the edible coating containing chitosan-based nanoemulsion could be effective to the preservation of shrimp's microbiological, chemical, and sensory characteristics.

Multifunctional xyloglucan-containing electrospun nanofibrous dressings for accelerating infected wound healing

Preventing wound infection is a major challenge in biomedicine. Conventional wound dressings often have poor moisturizing and antimicrobial properties unfavorable for wound healing. In this study, we prepared a multifunctional electrospun nanofiber dressing (PCQX-M) containing xyloglucan, quaternized chitosan, Polyvinyl alcohol, and collagen. By applying the concept of wet healing, xyloglucan and quaternized chitosan polysaccharides with excellent water solubility were employed to improve the absorption and moisturizing properties and maintain a moist microenvironment for the wound healing process. PCQX-M demonstrated high mechanical, thermodynamic, and biocompatible properties, providing suitable healing conditions for wounds. In addition, PCQX-M showed exceptional antibacterial properties and a potential inhibitory effect on the growth of microorganisms in infected wounds. More intriguingly, the restorative healing effect was investigated on a mouse model of whole skin injury infected with Staphylococcus aureus. Wound healing, collagen deposition, and immunofluorescence results showed that PCQX-M significantly promoted cell proliferation and angiogenesis at the injury site and facilitated the healing of the infected wound. Our study suggests that PCQX-M has excellent potential for clinical application in infected wound healing.

Electricity production performance enhancement of microbial fuel cells with double-layer sodium alginate hydrogel bioanodes driven by high-salinity waste leachate

The poor bacterial loading capacity and biocompatibility of the anode lead to weak electricity production performance of microbial fuel cells (MFCs). Inspired by kelp, we developed a double-layer hydrogel bioanode based on sodium alginate (SA). The inner hydrogel layer of encapsulated Fe3O4 and electroactive microorganisms (EAMs) was used as the bioelectrochemical catalytic layer. The outer hydrogel layer formed by cross-linking SA with polyvinyl alcohol (PVA) was used as the protective layer. The 3D porous structure of the inner hydrogel formed based on Fe3O4 facilitated the electroactive bacteria colonization and electron transfer, while the high structural toughness, salt-resistance and antibacterial properties of the outer highly cross-linked hydrogel served to protect the catalytic layer for stable electricity production. When high-salt waste leachate was used as the nutrient, the amazing open-circuit voltage (OCV) of 1.17 V and the operating voltage of 781 mV were brought by the double-layer hydrogel bioanode PVA@SA&Fe3O4/EAMs@SA.

Green synthesis of zinc oxide nanoparticles using lychee peel and its application in anti-bacterial properties and CR dye removal from wastewater

In nanoscience and nanobiotechnology, using plant extracts in synthesizing metal nanoparticles (NPs) has recently come to light as an exciting opportunity with several benefits over traditional physicochemical methods. In the present work, zinc oxide (ZnO) based nanoparticles (NPs) were synthesized by green chemistry route using lychee peel extract to capture hazardous congo red dye from wastewater and illustrate their antimicrobial behavior. The X-Ray Diffraction (XRD) spectra confirm the wurtzite crystal structure, and Fourier Transform Infrared (FTIR) spectra confirm the functional group in ZnO, which is suitable for dye adsorption. It was found that the NPs were spherical and had a size of <10 nm. The synthesized ZnO NPs could effectively remove >98% of CR dye from wastewater within 120 min of contact time at a wide pH range from 2 to 10. The primary mechanism involved in removing dye was the electrostatic interaction between ZnO adsorbent and CR dye. The antimicrobial performance of synthesized ZnO NPs was found to show 34% inhibition against Bacillus subtilis (ATCC 6538), 52% against Escherichia coli (ATCC 11103), 58% against Pseudomonas aeruginosa (ATCC 25668) and 32% against Staphylococcus aureus (ATCC 25923) using well diffusion assay. ZnO demonstrates a suitable anti-bacterial property over both gram-positive and gram-negative pathogenic bacteria. Overall, the green synthesized method for developing ZnO NPs shows promising and significant anti-bacterial performance and is a highly potential adsorbent for removing CR dye from wastewater.

Evaluation of physicochemical, antioxidant, antibacterial activity, and sensory properties of watermelon rind candy

Watermelon (Citrullus lanatus) is consumed all over the world that contains a large number of seeds and rind, which is discarded. These by-products contain phytochemical compounds with great nutritional potential. This study aims to evaluate physicochemical properties and sensory values of watermelon rind candy. In this study in order to make the waste of watermelon a more sustainable and value-added food product, the watermelon rind was dried using an osmotic dehydration technique which comprises gradual impregnation of syrup (50 and 70% w/w - 1 to 5 h) before drying at 40 and 60 °C in 8 and 10 h. Various variables such as moisture content, chemical composition, water loss, solid gain, rehydration water, acidity, pH, antioxidant activity, antibacterial activity, residual toxins, phenolic and flavonoid contents during osmotic dehydration of watermelon were investigated. Results showed by rising temperatures, dehydration becomes more severe. Increasing the temperature in both osmotic samples in a concentrated solution (70%) and in osmotic samples with a dilute solution (50%) can enhance the mass transfer, water loss, solid absorption, as well as dehydration intensity. However, antioxidant activity, phenolic and flavonoid content significantly decreased after osmotic dehydration. TPC decreased from 35.83 mg/100 g to 27.45 mg/100 g and TFC of the watermelon rind (8.71 ± 0.01 mg/100 g) decreased to 2.63 ± 0.02 mg/100 g and also antioxidant activity after the osmotic process decreased from 61% to 40%. Also, osmotic dehydration had no significant impact on acidity and pH. The watermelon rind dehydrated sample (osmosis temperature: 40 °C, osmotic solution concentration: 70%, immersion duration: 5 h) was the best choice of panelists due to the highest score in the sensory evaluation including taste, texture, and overall acceptability. By determining the hardness of the watermelon rind candy and comparing it with the results of texture analysis of other dried products, it can be concluded that this product can be used as a healthy snack with longer shelf life properties.

Coaxial microfluidic spinning design produced high strength alginate membranes for antibacterial activity and drug release

Directional drug delivery and sufficient strength are two conditions that need to be met for wound dressing. In this paper, an oriented fibrous alginate membrane with sufficient strength was constructed via coaxial microfluidic spinning, and zeolitic imidazolate framework-8/ascorbic acid was used to realize drug delivery and antibacterial activity. The effects of the process parameters of the coaxial microfluidic spinning on the mechanical properties of the alginate membrane were discussed. In addition, it was found that the antimicrobial activity mechanism of zeolitic imidazolate framework-8 was attributed to the disruptive effect of reactive oxygen species (ROS) on bacteria, and the quantitative amount of generated ROS were evaluated by detecting •OH and H₂O₂. Furthermore, a mathematical drug diffusion model was established and showed high consistency with the experimental data (R² = 0.99). This study provides a new idea for the preparation of dressing materials with high strength and directional drug delivery and also provides some guidance for the development of coaxial microfluidic spin technology to be used in functional materials for drug release.

Antimicrobial releasing hydrogel forming microneedles

Hydrogel-forming microneedle arrays as a technique for transdermal drug delivery show promise as an alternative to traditional drug delivery methods. In this work, hydrogel-forming microneedles have been created with effective, controlled delivery of amoxicillin and vancomycin within comparable therapeutic ranges to that of oral delivered antibiotics. Fabrication using reusable 3D printed master templates enabled quick and low-cost hydrogel microneedle manufacturing through micro-molding. By 3D printing at a tilt angle of 45° the resolution of the microneedle tip was improved by double (from ca. 64 μm down to 23 μm). Amoxicillin and vancomycin were encapsulated within the hydrogel's polymeric network through a unique room temperature swell/deswell drug loading method within minutes, eliminating the need for an external drug reservoir. The hydrogel-forming microneedle mechanical strength was maintained, and successful penetration of porcine skin grafts observed with negligible damage to the needles or surrounding skin morphology. Hydrogel swell rate was tailored by altering the crosslinking density, resulting in controlled antimicrobial release for an applicable delivered dosage. The potent antimicrobial properties of the antibiotic-loaded hydrogel-forming microneedles against both Escherichia coli and Staphylococcus aureus, highlights the beneficial use of hydrogel-forming microneedles towards the minimally invasive transdermal drug delivery of antibiotics.

Hybrid materials based on chitosan functionalized with green synthesized copper nanoparticles: Physico-chemical and antimicrobial analysis

Recently, the development of materials with antimicrobial properties has become a challenge under scrutiny. The incorporation of copper nanoparticles (NpCu) into a chitosan matrix appears to represent a viable strategy to contain the particles and prevent their oxidation. Regarding the physical properties, the nanocomposite films (CHCu) showed a decrease in the elongation at break (5 %) and an increase in the tensile strength of 10 % concerning chitosan films (control). They also showed solubility values lower than 5 % while the swelling diminished by 50 %, on average. The dynamical mechanical analysis (DMA) of nanocomposites revealed two thermal events located at 113° and 178 °C, which matched the glass transitions of the CH-enriched phase and nanoparticles-enriched phase, respectively. In addition, the thermogravimetric analysis (TGA) detected a greater stability of the nanocomposites. Chitosan films and the NpCu-loaded nanocomposites demonstrated excellent antibacterial capacity against Gram-negative and Gram-positive bacteria, proved through diffusion disc, zeta potential, and ATR-FTIR techniques. Additionally, the penetration of individual NpCu particles into bacterial cells and the leakage of cell content were verified by TEM. The mechanism of the antibacterial activity of the nanocomposites involved the interaction of chitosan with the bacterial outer membrane or cell wall and the diffusion of the NpCu through the cells. These materials could be applied in diverse fields of biology, medicine, or food packaging.

Antimicrobial activity and chemical profile of wood vinegar from eucalyptus (Eucalyptus urophylla x Eucalyptus grandis - clone I144) and bamboo (Bambusa vulgaris)

Microbial resistance to drugs is a public health problem; therefore, there is a search for alternatives to replace conventional products with natural agents. One of the potential antimicrobial agents is wood vinegar derived from the carbonization of lignocellulosic raw materials. The objectives of the present work were to evaluate the antibacterial and antifungal action of two kinds of wood vinegar (WV), one of Eucalyptus urograndis wood and another of Bambusa vulgaris biomass, and determine their chemical profile. The antimicrobial effect was assessed against Staphylococcus aureus, Pseudomonas aeruginosa, Salmonella enteritidis, Escherichia coli, Streptococcus agalactiae, and Candida albicans. The minimum inhibitory concentration and the minimum bactericidal and fungicidal concentrations were determined. Micrographs of the microorganisms before and after exposure to both kinds of wood vinegar were obtained by scanning electron microscopy. The chemical profile of the eucalyptus and bamboo vinegar was carried out by gas chromatography and mass spectrometry (GC/MS). Both types of WV presented significant antimicrobial activity, with the bamboo one having a higher efficiency. Both studied pyroligneous extracts seem promising for developing natural antimicrobials due to their efficiency against pathogens. GC/MS analyses demonstrated that the chemical profiles of both kinds of WV were similar but with some significant differences. The major component of the eucalyptus vinegar was furfural (17.2%), while the bamboo WV was phenol (15.3%). Several compounds in both WVs have proven antimicrobial activity, such as acetic acid, furfural, phenol, cresols, guaiacol, and xylenols. Together, they are the major in the chemical composition of the organic fraction of both WVs. Bamboo vinegar had a more expressive content of organic acids. Micrographs of microorganisms taken after exposure to both kinds of wood vinegar displayed several cell modifications. The potential of both types of wood vinegar as a basis for natural antimicrobial products seems feasible due to their proven effect on inhibiting the microorganisms' growth assessed in this experiment.

Eco-friendly synthesized silver nanoparticles from endophytic fungus Phyllosticta owaniana: KUMBMDBT-32 and evaluation of biomedical properties

The primary objective of the current investigation was the biosynthesis of Phy-AgNPs by the endophytic fungus Phyllosticta owaniana (extracted from Abrus precatorius) and the evaluation of the secondary metabolites from the ethyl acetate extract of P. owaniana cultivated by submerged fermentation. Utilizing bioanalytical strategies, Phy-AgNPs were characterized. The UV-visible spectrophotometer analysis revealed an absorption spectrum with a peak at 420 nm, thus validating the Phy-AgNPs synthesis. The FTIR analysis revealed peaks correlating to various potential functional groups, suggesting that Phy-AgNPs have been reduced and capped. SEM-EDAX and HR-TEM analyses demonstrated the spherical shape of Phy-AgNPs, and the 3 keV EDAX analysis confirmed the existence of silver atoms. XRD analyses showed the Phy-AgNPs crystalline structure. The size and the stability of synthesized Phy-AgNPs (65.81 nm) were measured by DLS and Zeta potential studies. While the ethyl acetate extract was analyzed with GC-MS and FTIR for secondary metabolites. The synthesized Phy-AgNPs showed effective antibacterial activity against Pseudomonas aeruginosa (15.1 ± 0.17 mm, 10 mg/mL), while the antifungal activity of Phy-AgNPs inhibited the growth of Candida albicans extremely efficiently (12.16 ± 0.28 mm, 10 mg/mL). Phy-AgNPs were evaluated for a variety of biomedical properties in which they showed significant activity. In a cell viability assay using the MTT assay, Phy-AgNPs exhibited a cytotoxic impact of up to 30.67% and 34.53% when 200 µg/mL were detected. In both in vitro and in vivo anti-inflammatory examinations, nanoparticles (NPs) exhibited a significant anti-inflammatory effect. These findings support the pharmaceutical and biomedical properties of the synthesized Phy-AgNPs.

A review on antimicrobial mechanism and applications of graphene-based materials

In recent years, graphene and its derivatives, owing to their phenomenal surface, and mechanical, electrical, and chemical properties, have emerged as advantageous materials, especially in terms of their potential for antimicrobial applications. Particularly important among graphene's derivatives is graphene oxide (GO) due to the ease with which its surface can be modified, as well as the oxidative and membrane stress that it exerts on microbes. This review encapsulates all aspects regarding the functionalization of graphene-based materials (GBMs) into composites that are highly potent against bacterial, viral, and fungal activities. Governing factors, such as lateral size (LS), number of graphene layers, solvent and GBMs' concentration, microbial shape and size, aggregation ability of GBMs, and especially the mechanisms of interaction between composites and microbes are discussed in detail. The current and potential applications of these antimicrobial materials, especially in dentistry, osseointegration, and food packaging, have been described. This knowledge can further drive research that aims to look for the most suitable components for antimicrobial composites. The need for antimicrobial materials has seldom been more felt than during the COVID-19 pandemic, which has also been highlighted here. Possible future research areas include the exploration of GBMs' ability against algae.

Underestimated microbial infection of resorbable membranes on guided regeneration

Barrier membranes are critical in creating tissuecompartmentalization for guided tissue (GTR) and bone regeneration (GBR) therapies. More recently, resorbable membranes have been widely used for tissue and bone regeneration due to their improved properties and the dispensable re-entry surgery for membrane removal. However, in cases with membrane exposure, this may lead to microbial contamination that will compromise the integrity of the membrane, surrounding tissue, and bone regeneration, resulting in treatment failure. Although the microbial infection can negatively influence the clinical outcomes of regenerative therapy, such as GBR and GTR, there is a lack of clinical investigations in this field, especially concerning the microbial colonization of different types of membranes. Importantly, a deeper understanding of the mechanisms of biofilm growth and composition and pathogenesis on exposed membranes is still missing, explaining the mechanisms by which bone regeneration is reduced during membrane exposure. This scoping review comprehensively screened and discussed the current in vivo evidence and possible new perspectives on the microbial contamination of resorbable membranes. Results from eligible in vivo studies suggested that different bacterial species colonized exposed membranes according to their composition (collagen, expanded polytetrafluoroethylene (non-resorbable), and polylactic acid), but in all cases, it negatively affected the attachment level and amount of bone gain. However, limited models and techniques have evaluated the newly developed materials, and evidence is scarce. Finally, new approaches to enhance the antimicrobial effect should consider changing the membrane surface or incorporating long-term released antimicrobials in an effort to achieve better clinical success.

Assessment of the phytochemical composition and antimicrobial properties of Tapinanthus bangwensis leaves hosted by the branches of Persea americana

BACKGROUND

Medicinal plants represent a valuable source for new effective and safe antimicrobial drugs making them an alternative therapy. Existing antimicrobial agents are costly and mostly associated with possible side effects. The aim of the present study therefore, was to assess the antimicrobial property and phytochemical composition of hydroethanolic extract of Tapinanthus bangwensis leaves and its fractions.

METHOD

T. bangwensis leaves (harvested from its host plant, Persea americana) was extracted by cold maceration with 70% ethanol and further fractionated with different organic solvents using the solvent partitioning method to obtain the crude extract, petroleum ether, chloroform, ethyl acetate and the resulting aqueous fractions. The phytochemical constituents of the extracts were screened and quantified. Also, the TLC of the extracts were analyzed to serve as a fingerprint. Using the agar diffusion and broth dilution methods, the antimicrobial properties of the extracts were assessed.

RESULTS

The study showed that the hydroethanolic (70%) crude extract of T. bangwensis leaves and its fractions contain phenolic compounds, flavonoids, saponins, phytosterols and reducing sugars. The phytoconstituents were well extracted into the ethyl acetate fraction than the other fractions evidenced in the high levels (p < 0.0001) of saponins (66.47 ± 1.72% w/w), phenolic compounds (77.75 ± 1.06 mg/100 mg GAE) and flavonoids (44.34 ± 0.06 mg/100 mg QE) contents. From the antimicrobial studies, all the microorganisms tested exhibited varying degrees of susceptibility to the extracts with MIC values between 0.78 to 12.5 mg/mL. The crude extract of T. bangwensis leaves, its ethyl acetate and chloroform fractions also exhibited lethal antimicrobial activity with MLC between 6.25 to 50 mg/mL.

CONCLUSION

The crude extract of T. bangwensis leaves and its fractions demonstrated antimicrobial properties against Escherichia coli, Staphylococcus aureus, Staphylococcus saprophyticus and Candida albicans, thereby representing a potential source of natural antimicrobial agent. Further study is required to identify and isolate antimicrobial compounds from the plant for the development of the natural bioactive antimicrobial agents.

Substituted naphthoxy-phthalonitrile derivatives: Synthesis, substituent effects, DFT, TD-DFT Calculations, antimicrobial properties and DNA interaction studies

Herein, substituted-naphthol derivatives 4a-e were synthesized in two steps, namely the Diels Alder cycloaddition and Cu-catalyzed aromatization reactions, respectively. Then, pththalonitrile derivatives 7-12 have been prepared by a nucleophilic displacement reaction of 3-nitrophthalonitrile with the naphthol derivatives 4a-e, 5 and, obtained in excellent yields. Structural characterization of the compounds was identified by different spectroscopic techniques. Antimicrobial properties of the synthesized compounds were determined by the microdilution procedure against Gram-positive, Gram-negative bacteria, and yeast. Furthermore, the DNA interaction of the compounds were determined by gel electrophoresis. One of the most prominent findings is that compounds 9 and 10 have more inhibitory effects on Gram-positive bacteria than Gram-negative bacteria. These compounds especially exhibited the highest antibacterial potency against S. aureus (625 µg/mL) among Gram-positive bacteria. According to the plasmid DNA interaction results, the synthesized compounds caused changes in the structure and mobility of the plasmid DNA. Then, geometry optimizations and frequency calculations were conducted at B3LYP/6-311 G(d,p) level of DFT, and optimized structures were used for further analyses. The NBO results revealed that the π→π * and n→π * interactions were greatly contributed to lowering the stabilization energy of all compounds (7-12). FMO energy analyses showed that compound 9 has the biggest electrodonating power.

Biosynthesis of Zinc Oxide Nanoparticles by Lactobacillus spp. and Investigation of their Antimicrobial Effect

BACKGROUND

Nanoparticle biology is preferable to other common methods due to its economic efficiency and compatibility with the environment. On the other hand, the prevalence of drug-resistant bacterial strains is expanding and it is necessary to use alternative antibiotic compounds to deal with them. The aim of the present study was the biosynthesis of zinc oxide nanoparticles(ZnO NPs) by Lactobacillus spp. and their antimicrobial effect.

METHODS

In this study, after the biosynthesis of ZnO NPs by Lactobacillus spp, Characterization of Nanoparticulation Was performed by UV-Vis, XRD, and Scanning Electron Microscopy (SEM). Additionally, Lactobacillus spp. - ZnO NPs were assessed for their antimicrobial properties.

RESULTS

UV-visible spectroscopy confirmed the Lactobacillus spp. - ZnO NPs absorbed UV in the region of 300-400 nm. XRD analysis showed the presence of zinc metal in nanoparticles. SEM revealed that Lactobacillus plantarum - ZnO NPs were smaller than the others. Staphylococcus aureus showed the largest non-growth halo diameter against ZnO NPs synthesized by L. plantarum ATCC 8014 (3.7 mm). E. coli had the largest growth halo diameter against ZnO NPs synthesized by L. casei (3 mm) and L. plantarum (2.9 mm). The MIC values of ZnO NPs synthesized by L. plantarum ATCC 8014, L.casei ATCC 39392, L. fermenyum ATCC 9338, L. acidophilus ATCC 4356 were 2,8,8 and 4 μg/mL for Staphylococcus aureus. The MIC values of ZnO NPs synthesized by L. plantarum ATCC 8014, L. casei ATCC 39392, L. fermenyum ATCC 9338, L. acidophilus ATCC 4356 were 2, 4, 4, and 4 μg/ml for E. coli. The lowest MICs were 2 μg/ml for E. coli and S. aureus related to ZnO NPs synthesized by L. plantarum ATCC 8014. MIC and MBC values were equivalent to each other.

CONCLUSION

The results of this research show that ZnO NPs synthesized by L. plantarum ATCC 8014 have more antimicrobial effects than other ZnO NPs used. Therefore, the ZnO NPs made with Lactobacillus plantarum ATCC 8014 have the potential to kill bacteria and can be considered a candidate for antibiotic replacement.

Green synthesis of silver nanoparticles from peel extract of Chrysophyllum albidum fruit and their antimicrobial synergistic potentials and biofilm inhibition properties

Current methods for green synthesis of metal nanoparticles often require continuous harvesting of fresh bio-materials for every synthesis cycle. Practices and procedures that economize bio-materials need to be employed if green synthesis could become a sustainable and eco-friendly method for synthesizing metal nanoparticles. This study explores Chrysophyllum albidum peels (mostly regarded as waste) to prepare silver nanoparticles (Alb-AgNPs). The technique employed in the synthesis allows repeated use of the peels, thus, reducing the heavy dependence on bio-materials. The optical and structural properties of the Alb-AgNPs were studied with Scanning electron microscope, Fourier transform infrared spectrometer, UV-Vis spectrophotometer and powder X-ray diffractometer. The antimicrobial properties of the Alb-AgNPs were studied with selected microorganisms namely; S. aureus, E. coli, K. pneumoniae, B. subtilis, S. mutans, P. aeruginosa, S. typhi, and Candida albicans. High inhibitory activity against the microorganisms were exhibited with MICs ranging from 15.62 to 1000 µg/mL. Again, the Alb-AgNPs showed the ability to enhance the efficacy of standard antimicrobial agents. The results of the combined interaction with standard antibacterial and antifungal agents ranged from synergistic to antagonistic effects against the tested microorganisms. In addition, the Alb-AgNPs could serve as a biofilm inhibitor with the highest percent inhibition of about 92% against methicillin-resistant Staphylococcus aureus. The results from this study thus provide access to the simple, sustainable, economic and eco-friendly synthesis of silver nanoparticles with efficient antimicrobial properties as drug candidates as a means of overcoming the prevailing antibiotic resistance menaces.

Smart nano-in-microparticles to tackle bacterial infections in skin tissue engineering

Chronic wounds (resulting from underlying disease, metabolic disorders, infections, trauma, and even tumours) pose significant health problems. In this work, microparticles, based on polysaccharides (maltodextrin or dextran) and amino acids, and doped with antibacterial nanoparticles (CuO or ZnO NPs) are designed. Smart nano-in-microparticles with a hierarchical 3D structure are developed. The ultimate goal aims at an innovative platform to achieve skin repair and to manage skin colonization by avoiding infection that could delay and even impair the healing process. The microparticles are prepared by spray-drying and cross-linked by heating, to obtain insoluble scaffolds able to facilitate cell proliferation in the wound bed. The nano-in-microparticles are characterized using a multidisciplinary approach: chemico-physical properties (SEM, SEM-EDX, size distribution, swelling and degradation properties, structural characterization - FTIR, XRPD, SAXS - mechanical properties, surface zeta potential) and preclinical properties (in vitro biocompatibility and whole-blood clotting properties, release studies and antimicrobial properties, and in vivo safety and efficacy on murine burn/excisional wound model) were assessed. The hierarchical 3D nano-in microparticles demonstrate to promote skin tissue repair in a preclinical study, indicating that this platform deserves particular attention and further investigation will promote the prototypes translation to clinics.

Are chemical compounds in medical mushrooms potent against colorectal cancer carcinogenesis and antimicrobial growth?

After cardiovascular diseases, cancer is the second main cause of death globally. Mushrooms have been demonstrated to contain amalgamation with properties capable of inhibiting carcinogenesis and microbial growth, principally secondary metabolites such as quinolones, steroids, terpenes, anthraquinones, and benzoic acid derivatives among others. This study aimed to substantiate their potency concerning colon cancer carcinogenesis and antimicrobial growth. A systematic search of important literature was performed considering all the articles published until April 2022. Screening was performed by searching the BMC Springer, Elsevier, Embase, Web of Science, Ovid, and MEDLINE databases. In addition, Google Scholar was used to supplement information. Titles and abstracts that matched the established criteria were selected for full-text article scrutiny and subsequently used in the updated present review. Bioactive compounds present in medicinal mushrooms such as ascorbic acid, organic acids, flavonoids, polysaccharides, glycosides, phenols, linoleic acid, grifolin, and tocopherols among other compounds play a key role in suppressing the proliferation of cancerous cells and selectively act as antibacterial and antifungal agents. These metabolites actively scavenge oxygen free radicals, hydroxyl radicals, and nitrite radicals that would otherwise increase the risks of the growth and development of cancerous cells. Mushrooms' bioactive compounds and metabolites actively inhibit nuclear factor-kappa activation, protein kinase B processes, and ultimately the expression of Cyclooxygenases 2 in cancerous cells. Medicinal mushrooms should be considered as alternative natural chemo-preventive agents in the global fight against colon cancer and the evolution of drug-resistant pathogenic microorganisms, as they exhibit robust potency. They have not been reported to exhibit adverse harmful effects compared to synthetic chemotherapies, yet they have been reported to demonstrate significant beneficial effects.

Starch-based composite foam for chicken meat packaging

The development of compostable packages that maintain fresh meat quality, is an important achievement for the poultry industry. The objective of this study was to evaluate the feasibility of using a starch-based composite foam (SCF) in the packaging of fresh chicken meat during refrigerated storage. SCF was prepared using extrusion process. Nisin (2%) was added as antimicrobial agent (SCFN). Commercial expanded polystyrene (EPS) was used as control. Physical characterization, antimicrobial analysis and storage of fresh chicken meat were carried out. No differences were observed in SEM images between SFC and SCFN samples. Water uptake of SCF were higher than SCFN (p < 0.05). SCFN exhibited higher Young´s modulus and flexural strength (p < 0.05), and antimicrobial effect against foodborne pathogens. During the storage of chicken meat, the starch-based composite foam showed a higher capacity to retain liquid than EPS. The color of chicken meat had slight variations at day 4 compared with the raw meat. Nisin did not retard lipid oxidation of chicken meat, however, the aerobic plate count was lower. Therefore, the starch-based composite foam is suitable for fresh meat storage, being improved with the incorporation of nisin as antimicrobial agent.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-022-05538-6.

Amino-functionalized cross-linked cellulosic fabric with antibacterial, UV protection, and coloring effects using folic acid

The amino-functionalized cellulose with folic acid, via an esterification reaction between carboxylic acid of folic acid and hydroxyl groups of cellulose, can develop multifunctional products with new chemical and physical properties. Folic acid contains two carboxylic groups as well as an amine group that can be used as a coupling agent and provide suitable conditions for coupling hydroxyl-based compounds to cellulose. Also; the multi-functionalized cellulose with folic acid has no effects on the physical and mechanical properties and also has benefits such as antibacterial, UV protection, and wrinkle resistance. The FTIR-ATR and Raman analysis confirmed the amino functionalized-cellulosic fabric via an esterification reaction between cellulose and folic acid. The cell viability of L929 fibroblast (NCBI C161) and MCF-7 (NCBI C135) cancer cells indicated more effectiveness on MCF-7 cancer cells. Therefore; folic acid can be used as a biocompatible natural cross-linker to modify cellulose fabrics for apparel and medical applications.

ε-Poly-l-lysine-modified natural silk fiber membrane wound dressings with improved antimicrobial properties

Many complex diseases, such as bacterial infections, frequently accompany cutaneous wound healing, adding to the difficulty of clinical wound management. Consequently, in addition to displaying strong biocompatibility and actively promoting wound healing, an optimal wound dressing should also possess antimicrobial qualities to address issues with bacterial infection. This paper developed natural silk fiber (SF) membranes (also known as a flat silk cocoon (FSC)) with antimicrobial properties as a dressing for skin wounds. By changing the spinning tools and environment of silkworm larvae, a novel natural SF membrane with a cocoon structure and controllable size was prepared. The functional SF membranes were obtained via a hot press process and grafted with ε-Poly-l-lysine (EPL). The results showed that the SF membrane dressing was adjustable in size with a similar structure to the extracellular matrix (ECM), displaying inherent mechanical properties, excellent antimicrobial qualities, and biocompatibility. In vivo experiments using a full-thickness skin defect model indicated that EPL-modified SF membranes significantly promoted the rate of wound healing, exhibiting thicker granulation tissue and higher collagen disposition than commercial dressings (Tegaderm™ film). Therefore, the excellent mechanical qualities and cytocompatibility of the antimicrobial EPL-modified SF membranes substantially promote their potential application as a chronic wound dressing.

Protein coronas coating polymer-stabilized silver nanocolloids attenuate cytotoxicity with minor effects on antimicrobial performance

Silver nanoparticles are versatile platforms with a variety of applications in the biomedical field. In this framework, their presence in biological media inevitably leads to the interaction with proteins thus conducting to the formation of biomolecular coronas. This feature alters the identity of the nanomaterial and may affect many biological events. These considerations motivated the investigation of protein adsorption onto the surface of polymer-stabilized AgNPs. The metallic colloids were coated by polyethyleneimine (PEI), polyvinylpyrrolidone (PVP), and poly(2-vinyl pyridine)-b-poly(ethylene oxide) (PEO-b-P2VP), and nanoparticle-protein interaction was probed by using a library of analytical techniques. The experimental data revealed a higher extent of protein adsorption at the surface of AgNPs@PVP whereas PEO-b-P2VP coating conducted to the least amount. The main component of the protein coronas was evidenced to be bovine serum albumin (BSA), which is indeed the protein at the highest abundancy in the model biological media. We have further demonstrated reduced cytotoxicity of the silver colloids coated by biomolecular coronas as compared to the pristine counterparts. Nevertheless, the protein coatings did not notably reduce the antimicrobial performance of the polymer-stabilized AgNPs. Accordingly, although the protein-repelling property is frequently targeted towards longer in vivo circulation of nanoparticles, we herein underline that protein coatings, which are commonly treated as artifacts to be avoided, may indeed enhance the biological performance of nanomaterials. These findings are expected to be highly relevant in the design of polymer-stabilized metallic colloids intended to be used in healthcare.

Electrospun alginate mats embedding silver nanoparticles with bioactive properties

Polysaccharide-based composites embedding silver nanoparticles (AgNPs) represent a promising alternative to common antimicrobial materials because of the effective, broad-spectrum biocidal properties of AgNPs combined with the biocompatibility and environmental safety of the naturally occurring polymeric component. In this work, AgNPs stabilized with alginate chains (Alg@AgNPs) were successfully synthesized in situ within the polysaccharide solution through a wet chemical approach carried out at different concentrations of the silver salt precursor. Once obtained, the aqueous suspensions were electrospun to prepare non-woven membranes, showing a homogeneous nanostructured texture (with fiber diameter between 100 and 150 nm), which was found to be influenced by the size (between 20 and 35 nm) of the embedded metal nanoparticles. The biocidal potential of the nanocomposite mats was preliminarily tested against Gram-negative E. coli. The results showed that the antimicrobial response of the investigated samples occurred within a day of incubation and can be observed for AgNPs content in the polysaccharide fibers far below the nanomolar regime.

Multiple health benefits of curcumin and its therapeutic potential

Turmeric, or Curcuma longa as it is formally named, is a multifunctional plant with numerous names. It was dubbed "the golden spice" and "Indian saffron" not only for its magnificent yellow color, but also for its culinary use. Turmeric has been utilized in traditional medicine since the dawn of mankind. Curcumin, demethoxycurcumin, and bisdemethoxycurcumin, which are all curcuminoids, make up turmeric. Although there have been significant advancements in cancer treatment, cancer death and incidence rates remain high. As a result, there is an increasing interest in discovering more effective and less hazardous cancer treatments. Curcumin is being researched for its anti-inflammatory, anti-cancer, anti-metabolic syndrome, neuroprotective, and antibacterial properties. Turmeric has long been used as a home remedy for coughs, sore throats, and other respiratory problems. As a result, turmeric and its compounds have the potential to be used in modern medicine to cure a variety of diseases. In this current review, we highlighted therapeutic potential of curcumin and its multiple health benefits on various diseases.

Influence of acidic pH on antimicrobial activity of different calcium silicate based-endodontic sealers

OBJECTIVE

To investigate the antibacterial activity of calcium silicate-based sealers (CSBSs) against Enterococcus faecalis biofilm in a neutral or acidic condition.

MATERIALS AND METHODS

Dentin cylinders (4 mm length) were prepared and infected with 3-week-old E. faecalis. The samples were filled with BioRoot RCS (BR), EndoSequence BC (ES), and NeoMTA Plus (NMTA) and incubated in either neutral or acidic conditions for 7 days (n=10/group). Sterile or infected samples alone were used as the positive and negative control. The root canal sealers were removed after 7 days, and the remaining bacteria on dentinal walls were determined by colony-forming units (CFUs/ml), and three samples from each group were visualized under a confocal laser scanning microscope (CLSM). The pH was also measured (n=3/group) after 4 h and 7 days of incubation at 37°C in both conditions.

RESULTS

In the neutral condition, all sealers significantly decreased the log-CFU values (p<0.05), while in the acidic condition, the log-CFU reduction was less for ES and NMTA, but a higher reduction was observed in BR (p<0.05). The antibacterial activity of CSBSs was similar in neutral conditions (p>0.05), and BR showed a greater antibacterial effect than ES and NMTA in the acidic condition (p<0.05). The pH of BR, ES, and NMTA ranged from 8.2 to 8.8 in the neutral condition in the presence of dentin after 7 days. However, acidic conditions reduced the pH values to 7.8 for BR, 6.0 for ES, and 5.8 for NMTA.

CONCLUSIONS

All CSBSs showed similar antibacterial activity in neutral conditions, while acidic pH had a reducing antibacterial effect on CSBSs.

CLINICAL RELEVANCE

Inflammatory pH decreased the antibacterial properties of CSBSs depending on the sealer type.

A self-crosslinking, double-functional group modified bacterial cellulose gel used for antibacterial and healing of infected wound

Cellulose/chitosan composite, as a mature commercial antibacterial dressing, is an important type of wound repair material. However, how to achieve the perfect compound of two components and improve antibacterial activity is a major, lingering issue. In this study, a bifunctional group modified bacterial cellulose (DCBC) was prepared by carboxymethylation and selective oxidation. Further, the chitosan (CS) was compounded in the network of DCBC by self-crosslinking to form dialdehyde carboxymethyl bacterial cellulose/chitosan composites (S-DCBC/CS). The aldehyde group can react with amino of CS by Schiff base reaction. The carboxyl group of DCBC and the amorphous distribution of CS molecular chains increase the antimicrobial properties of composites. The bacteriostatic rate of composites could be higher than 95%. Bacteria can be attracted onto the surface of composites, what we call it “directional adhesion antibacterial effects”. In particular, a kind of large animal wound model, deep Ⅱ degree infected scald of Bama miniature pig, was used to research the antimicrobial and healing properties of materials. The S-DCBC/CS can effectively inhibit bacterial proliferation of wound and kill the bacteria. The wound healing rate of S-DCBC/CS was up to 80% after three weeks. The composites show better antibacterial and promoting concrescence effects than traditional chitosan dressings.

•

A network composites from dialdehyde carboxylmethyl BC with chitosan that has good antibacterial properties.

•

Deep Ⅱ degree infected scald of Bama pig was used to research the antimicrobial and healing properties of S-DCBC/CS.

•

The S-DCBC/CS composites could promote epidermal growth and collagen production.

Size Attenuated Copper Doped Zirconia Nanoparticles Enhances In Vitro Antimicrobial Properties

Biofilm formation hinders the activity of antimicrobial drugs at the site of infections and any agent that can act on both Gram-positive and Gram-negative bacteria by inhibiting the bacterial growth and rupturing the biofilm is needed to manage infection. In the present study, we have synthesized zirconia nanoparticles (ZrO₂ NPs) and copper doped zirconia nanoparticles (Cu-ZrO₂ NPs) and characterized them using dynamic light scattering, X-ray diffractometry, and scanning electron microscopy (SEM). The size of the Cu-ZrO₂ NPs drastically reduced compared to ZrO₂ NPs, and the antimicrobial activity was studied against Gram-positive bacteria (Lactobacillus sp.) and Gram-negative bacteria (Pseudomonas aeruginosa), respectively. The synthesized Cu-ZrO₂ NPs showed superior inhibitory action against Lactobacillus sp. compared to ZrO₂ NPs, due to the negatively charged cell wall of Lactobacillus sp., which could attract readily the positively charged Cu-ZrO₂ NPs, thereby inhibiting its activity. The biocompatibility was tested using XTT assay in FL cells, and the results demonstrated that Cu-ZrO₂ NPs were nontoxic to mammalian cells. Hence, it could be proposed that the synthesized Cu-ZrO₂ NPs possess possible biomedical applications and can be used as antibacterial agents without causing toxicity in mammalian cells.

Photo-Induced Antifungal Activity of Chitosan Composite Film Solution with Nano-Titanium Dioxide and Nano-Silver

ABSTRACT

This study was conducted to investigate the UV light-induced effect of chitosan-titanium dioxide-silver (CTS-TiO2-Ag) nanocomposite film solution against Penicillium steckii and the underlying physiological mechanism of this effect. With longer UV exposure time, pathogen inhibition increased. UV-photoinduced treatment for 120 min produced the smallest P. steckii colony diameter, at 4.85 mm. However, when this treatment was followed by 8 h of storage, the conductivity of the P. steckii culture medium reached its highest level, at 713 microsiemens per cm. After a 120-h growth period on mangoes under the same conditions, the lesion diameters and proportion of infected mangoes reached 12.61 mm and 41.67%, respectively. Because the P. steckii cell membrane was severely disrupted, its permeability increased, causing serious extravasation of intracellular protein and nucleic acid material. Malondialdehyde, catalase, and superoxide dismutase in the P. steckii cells reached maximum concentrations (2.1106 μmol/mL, 44.06 U/mL, and 24.67 U/mL, respectively) after 8 h of incubation. These results indicate significant P. steckii inhibition by the UV light induction of the CTS-TiO2-Ag nanocomposite film solution.

HIGHLIGHTS

The synthesis of soluble and volatile bioactive compounds by selected brewer's yeasts: Antagonistic effect against enteropathogenic bacteria and food spoiler - toxigenic Aspergillus sp

•

Brewing fermentation residue possesses bacteriostatic and fungicidal activity.

•

Crude brewing fermentation residue is an antimicrobial agent.

•

Brewer’s yeasts secrete soluble and volatile bioactive compounds.

•

Ethanol and 2,3-butanediol possess bacteriostatic and antifungal properties.

Contamination by Aspergillus sp. and the accumulation of its mycotoxins in food and beverages have a high impact on human health and food safety. This investigation inquires the ability of brewer’s yeasts discarded after fermentation (brewing fermentation residue, BFR) to synthesize bioactive compounds and to biocontrol Aspergillus sp. BFRs of Saccharomyces cerevisiae MBELGA62 and Pichia kudriavzevii MBELGA61 proved to have bacteriostatic properties and to be efficient in fungal growth reduction, decreasing the growth rate of Aspergillus flavus and Aspergillus parasiticus up to 37.8% and 42.5%, respectively. Fungal mycelium degradation along with absentia of conidia was detected near the yeast inoculum. Moreover, the yeasts synthesize volatile bioactive compounds that extend Aspergillus sp. lag phase above 100% and decrease fungal growth rates from 20% towards 44%, along with the complete inhibition of conidia synthesis. These results indicate the potential of this residue to be used in biocontrol applications in the food industry.

Highly antimicrobial and strong cellulose-based biocomposite film prepared with bacterial cellulose powders, Uncaria gambir, and ultrasonication treatment

This work characterized bacterial cellulose (BC)/Uncaria gambir (G) biocomposite film prepared with ultrasonication treatment. Films were prepared from BC powder suspensions in distilled water without and with various loadings (0.05 g, 0.1 g, 0.2 g, 2 g) of G powder then treated using an ultrasonic probe at 1000 W for one hour. The results revealed that the ultrasonication treatment of the suspension greatly increased tensile strength (TS), elongation at break (EB), and toughness (TN) of a BC film by 3097%, 644%, and 32,600%, respectively, compared to non-sonicated BC film. After adding 0.05 g G into the sonicated BC powder suspension, TS, EB, and TN of the biocomposite film were improved to 105.6 MPa, 14.3%, and 8.7 MJ/m³, respectively. The addition of the G increased in antimicrobial activity of the film. This study indicates that biocomposite film is potentially useful for nanopaper production with good antimicrobial and high tensile properties.

A novel method of creating thermoplastic chitosan blends to produce cell scaffolds by FDM additive manufacturing

Due to its remarkable and promising biological and structural properties, chitosan has been widely studied in several potential applications in the biomedical sector. Attempts are being made to use this polymer and its properties in thermoplastics dedicated to 3D printing in FDM technology. However, chitosan can be processed only from acid solution, which limits its applications. The paper presents a new path for the production of filaments based on unstable chitosan hydrogel obtained by carbon dioxide saturation, as well as synthetic polymers such as polyvinyl alcohol and polycaprolactone. The results confirm that the absence of acid allows formation of thermally stable and printable filaments containing from 5% to 15% of chitosan, capable of reducing S. aureus and E. coli bacteria by 0.41-1.43 in logarithmic scale (56-94%) and 0.28-0.94 in logarithmic scale (36-89%), respectively.

Antimicrobial and antifungal properties of NiCu-PANI/PVA quaternary nanocomposite synthesized by chemical oxidative polymerization of polyaniline

Increasing antimicrobial resistance has led to use of novel technologies such as nanomaterials and nanocomposites that have shown effective antimicrobial and/or antifungal activities against several gram-positive and gram-negative bacteria. There have been limited studies on antimicrobial properties of the combined polymer nanocomposites with transitional bimetallic nanoparticles such as nickel (Ni) and copper (Cu). Thus, the main objective of this study was to synthesis, characterize and investigate the antibacterial and antifungal properties of NiCu-PANI/PVA nanocomposite. The nanocomposite films with different amount of Ni and Cu salts were synthesized by chemical oxidative polymerization of polyaniline using HCl as oxidant and PVA as a stabilizer. Optical, chemical composition, and morphological characteristics as well as thermal stability were evaluated using UV-Visible, FTIR, SEM-EDX, and TGA analyses. Antimicrobial properties were then determined using the disc diffusion assay against gram-negative bacteria (i.e., Escherichia coli ATCC 25922, Klebsiella pneumonia ATCC 700603, Proteus sp.,) and gram-positive bacteria (i.e., Staphylococcus aureus ATCC 2593). Fungal plant pathogens including Aspergillus niger and Fusarium oxysporum f. sp. pisi were also evaluated for determination of antifungal activity of NiCu-PANI/PVA films. Among the synthesized films, Ni₆₅Cu₃₅-PANI/PVA showed excellent antibacterial activity against all the bacteria strains examined in this study. The diameters of inhibition zones for Escherichia coli ATCC 25922, Klebsiella pneumoniae ATCC 700603, Proteus sp., and Staphylococcus aureus ATCC 2593 were 23, 23, 17, and 18 mm, respectively indicating good antibacterial activities. Additionally, NiCu-PANI/PVA, particularly the films with higher Cu intake, showed better antifungal activity against Fusarium oxysporum f. sp. pisi. However, NiCu-PANI/PVA was ineffective against Aspergillus niger.

Hyaluronic acid and chitosan-based electrospun wound dressings: Problems and solutions

To date, available review papers related to the electrospinning of biopolymers including polysaccharides for wound healing were focused on summarizing the process conditions for two candidates, namely chitosan and hyaluronic acid. However, most reviews lack the discussion of problems of hyaluronan and chitosan electrospun nanofibers for wound dressing applications. For this reason, it is required to update information by providing a comprehensive overview of all factors which may play a role in the electrospinning of hyaluronic acid and chitosan for applications of wound dressings. This review summarizes the fabricated chitosan and hyaluronic acid electrospun nanofibers as wound dressings in the last years, including methods of preparations of nanofibers and challenges for the electrospinning of both pure chitosan and hyaluronic acid and strategies how to overcome the existing difficulties. Moreover, in this review the biological roles and mechanisms of chitosan and hyaluronic acid in the wound healing process are explained including the advantages of nanofibers for ideal wound management using the common solvents, copolymers enhancing spinning process, and the most biologically active incorporated substances thereby providing drug delivery in wound healing.

Characterization and biological activities of melanin pigment from root endophytic fungus, Phoma sp. RDSE17

Melanins are high molecular weight hydrophobic pigments which have gained popularity for their role in virulence against different pathogens. In the present study, we isolated and characterized the melanin pigment produced by a dark septate endophyte fungus Phoma sp. RDSE17, which was associated with the roots of an indigenous Oryza sativa cv. 'Chakhao amubi' in Manipur, Northeast India. The biological properties of purified melanin from the fungus were evaluated for their antioxidant, antimicrobial and anticancerous activities. The pigment was extracted from Phoma sp. by alkaline-acid hydrolysis method and confirmed as melanin through physico-chemical tests and spectral (UV, FTIR, and EPR) analysis. The analyses of the elemental composition indicated that the pigment possessed a low percentage of nitrogen (N) contents, and therefore, would not fall under DOPA class of melanin. Exposure of the fungus to melanin pathway inhibitors revealed a positive melanin inhibition by tricyclazole, but not by kojic acid. Thus, the melanin from Phoma sp. may be a member of the DHN family. Moreover, the purified melanin showed high DPPH (1, 1-Diphenyl-2-picrylhydrazyl) free radical-scavenging activity with an EC₅₀ of 69 µg/mL and inhibited human lung cancer cell (A549 cells) proliferation at 80 µg/mL. The present study demonstrates that melanin from Phoma sp. RDSE17 could be employed as a potential biological (antioxidant) and antimicrobial agent for inhibiting the growth of humans and phytopathogens.