1
|
Synthesis and characterization of nanocomposite based polymeric membrane (PES/PVP/GO-TiO 2) and performance evaluation for the removal of various antibiotics (amoxicillin, azithromycin & ciprofloxacin) from aqueous solution. CHEMOSPHERE 2024; 353:141542. [PMID: 38428535 DOI: 10.1016/j.chemosphere.2024.141542] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/25/2023] [Revised: 02/06/2024] [Accepted: 02/23/2024] [Indexed: 03/03/2024]
Abstract
The escalating global concern regarding antibiotic pollution necessitates the development of advanced water treatment strategies. This study presents an innovative approach through the fabrication and evaluation of a Polyethersulfone (PES) membrane adorned with GO-TiO2 nanocomposites. The objective is to enhance the removal efficiency of various antibiotics, addressing the challenge of emerging organic compounds (EOCs) in water systems. The nanocomposite membranes, synthesized via the phase inversion method, incorporate hydrophilic agents, specifically GO-TiO2 nanocomposites and Polyvinylpyrrolidone (PVP). The resultant membranes underwent comprehensive characterization employing AFM, EDS, tensile strength testing, water contact angle measurements, and FESEM to elucidate their properties. Analysis revealed a substantial improvement in the hydrophilicity of the modified membranes attributed to the presence of hydroxyl groups within the GO-TiO2 structure. AFM images demonstrated an augmentation in surface roughness with increasing nanocomposite content. FESEM images unveiled structural modifications, leading to enhanced porosity and augmented water flux. The pure water flux elevated from 0.980 L/m2.h-1 for unmodified membranes to approximately 6.85 L/m2.h-1 for membranes modified with 2 wt% nanocomposites. Membrane performance analysis indicated a direct correlation between nanocomposite content and antibiotic removal efficiency, ranging from 66.52% to 89.81% with 4 wt% nanocomposite content. Furthermore, the nanocomposite-modified membrane exhibited heightened resistance to fouling. The efficacy of the membrane extended to displaying potent antibacterial properties against microbial strains, including S. aureus, E. coli, and Candida. This study underscores the immense potential of GO-TiO2 decorated PES membranes as a sustainable and efficient solution for mitigating antibiotic contamination in water systems. The utilization of nanocomposite membranes emerges as a promising technique to combat the presence of EOC pollutants, particularly antibiotics, in water bodies, thus addressing a critical environmental concern.
Collapse
|
2
|
Green synthetic sodium alginate-glycerol-MXene nanocomposite membrane with excellent flexibility and mineralization ability for guided bone regeneration. J Mech Behav Biomed Mater 2024; 150:106336. [PMID: 38169210 DOI: 10.1016/j.jmbbm.2023.106336] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/19/2023] [Revised: 12/14/2023] [Accepted: 12/16/2023] [Indexed: 01/05/2024]
Abstract
Developing a novel bioactive material as a barrier membrane for guided bone regeneration (GBR) surgery remains challenging. As a new member of two-dimensional (2D) material family, MXene is a promising candidate component for barrier membranes due to its high specific surface area and osteogenic differentiation ability. In this work, a green and simple SA/glycerol/MXene (SgM) composite membrane was prepared via solvent casting method by using sodium alginate (SA) and MXene (M) as raw materials while employing glycerol (g) as a plasticizer. The addition of glycerol significantly increased the elongation at the break of SA from 10%-20% to 240%-360%, while the introduction of MXene promoted the deposition of calcium and phosphorus to form hydroxyapatite. At the same time, the roughness of the SgM composite membrane is apparently improved, which is conducive to cell adhesion and proliferation. This work provides a basis for further research on SgM composite membrane as GBR membrane for the treatment of bone defects.
Collapse
|
3
|
Flexible, durable, and anti-fouling maghemite copper oxide nanocomposite-based membrane with ultra-high flux and efficiency for oil-in-water emulsions separation. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2024; 31:2297-2313. [PMID: 38062214 DOI: 10.1007/s11356-023-31240-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/15/2023] [Accepted: 11/21/2023] [Indexed: 01/18/2024]
Abstract
In this study, we developed a novel nanocomposite-based membrane using maghemite copper oxide (MC) to enhance the separation efficiency of poly(vinyl chloride) (PVC) membranes for oil-in-water emulsions. The MC nanocomposite was synthesized using a co-precipitation method and incorporated into a PVC matrix by casting. The resulting nanocomposite-based membrane demonstrated a high degree of crystallinity and well-dispersed nanostructure, as confirmed by TEM, SEM, XRD, and FT-IR analyses. The performance of the membrane was evaluated in terms of water flux, solute rejection, and anti-fouling properties. The pinnacle of performance was unequivocally reached with a solution dosage of 50 mL, a solution concentration of 100 mg L-1, and a pump pressure of 2 bar, ensuring that every facet of the membrane's potential was fully harnessed. The new fabricated membrane exhibited superior efficiency for oil-water separation, with a rejection rate of 98% and an ultra-high flux of 0.102 L/m2 h compared to pure PVC membranes with about 90% rejection rate and an ultra-high flux of 0.085 L/m2 h. Furthermore, meticulous contact angle measurements revealed that the PMC nanocomposite membrane exhibited markedly lower contact angles (65° with water, 50° with ethanol, and 25° with hexane) compared to PVC membranes. This substantial reduction, transitioning from 85 to 65° with water, 65 to 50° with ethanol, and 45 to 25° with hexane for pure PVC membranes, underscores the profound enhancement in hydrophilicity attributed to the heightened nanoparticle content. Importantly, the rejection efficiency remained stable over five cycles, indicating excellent anti-fouling and cycling stability. The results highlight the potential of the maghemite copper oxide nanocomposite-based PVC membrane as a promising material for effective oil-in-water emulsion separation. This development opens up new possibilities for more flexible, durable, and anti-fouling membranes, making them ideal candidates for potential applications in separation technology. The presented findings provide valuable information for the advancement of membrane technology and its utilization in various industries, addressing the pressing challenge of oil-induced water pollution and promoting environmental sustainability.
Collapse
|
4
|
Effectiveness of different CuO morphologies nanomaterials on the permeability, antifouling, and mechanical properties of PVDF/PVP/CuO ultrafiltration membrane for water treatment. CHEMOSPHERE 2023; 337:139333. [PMID: 37379983 DOI: 10.1016/j.chemosphere.2023.139333] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/10/2023] [Revised: 06/19/2023] [Accepted: 06/23/2023] [Indexed: 06/30/2023]
Abstract
The hydrophobic nature of Poly (vinylidene fluoride) (PVDF) is a significant barrier to use in ultrafiltration, resulting in fouling, flux decline, and reduced lifespan in water treatment. This study examines the effectiveness of different morphologies of CuO nanomaterials (NMs) (spherical, rod, plate, and flower), synthesized by the facile hydrothermal method, to modify PVDF membrane with PVP additive for improving the performance of water permeability and antifouling. Such membrane configurations with different morphologies of CuO NMs improved hydrophilicity with a maximum water flux of 222-263 L m-2h-1 compared to 195 L m-2h-1 for the bare membrane and exhibited excellent thermal and mechanical strengths. The characterization results exhibited that plate-like CuO NMs were dispersed uniformly in the membrane matrix, and their incorporation as a composite improved the membrane properties. From the antifouling test with the bovine serum albumin (BSA) solution, the membrane with plate-like CuO NMs had the highest flux recovery ratio (FRR) (∼91%) and the lowest irreversible fouling ratio (∼10%). The antifouling enhancement was due to less interaction between modified membranes and foulant. Further, the nanocomposite membrane showed excellent stability and negligible Cu2+ ion leaching. Overall, our findings provide a new strategy for developing inorganic nanocomposite PVDF membranes for water treatment.
Collapse
|
5
|
Sulphonated poly(ethersulfone)/carbon nano-onions-based nanocomposite membranes with high ion-conducting channels for salt removal via electrodialysis. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:87343-87352. [PMID: 37421532 DOI: 10.1007/s11356-023-28570-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/28/2023] [Accepted: 06/29/2023] [Indexed: 07/10/2023]
Abstract
Herein, we are reporting the carbon nano onions (CNO)-based sulphonated poly(ethersulfone) (SPES) composite membranes by varying CNO content in SPES matrix for water desalination applications. CNOs were cost-effectively synthesized using flaxseed oil as a carbon source in an energy efficient flame pyrolysis process. The physico- and electrochemical properties of nanocomposite membranes were evaluated and compared to pristine SPES. Moreover, the chemical characterisation of composite membranes and CNOs were illustrated using techniques such as nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscope (FE-SEM), thermogravimetric analysis (TGA) and universal tensile machine (UTM). In the series of nanocomposite membranes, SPES-0.25 composite membrane displayed the highest water uptake (WU), ion exchange membrane (IEC) and ionic conductivity (IC) values that were enhanced by 9.25%, ~ 44.78% and ~ 6.10%, respectively, compared to pristine SPES membrane. The electrodialytic performance can be achieved maximum when membranes possess low power consumption (PC) and high energy efficiency (Ee). Therefore, the value of Ee and Pc for SPES-0.25 membrane has been determined to be 99.01 ± 0.97% and 0.92 ± 0.01 kWh kg-1, which are 1.12 and 1.11 times higher than the pristine SPES membrane. Hence, integrating CNO nanoparticles into the SPES matrix enhanced the ion-conducting channels.
Collapse
|
6
|
A review on optimistic development of polymeric nanocomposite membrane on environmental remediation. CHEMOSPHERE 2023; 315:137706. [PMID: 36592836 DOI: 10.1016/j.chemosphere.2022.137706] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/26/2022] [Revised: 12/13/2022] [Accepted: 12/29/2022] [Indexed: 06/17/2023]
Abstract
Current health and environmental concerns about the abundance and drawbacks of municipal wastewater as well as industrial effluent have prompted the development of novel and innovative treatment processes. A global shortage of clean water poses significant challenges to the survival of all life forms. For the removal of both biodegradable and non-biodegradable harmful wastes/pollutants from water, sophisticated wastewater treatment technologies are required. Polymer membrane technology is critical to overcoming this major challenge. Polymer matrix-based nanocomposite membranes are among the most popular in polymer membrane technology in terms of convenience. These membranes and their major components are environmentally friendly, energy efficient, cost effective, operationally versatile, and feasible. This review provides an overview of the drawbacks as well as promising developments in polymer membrane and nanocomposite membranes for environmental remediation, with a focus on wastewater treatment. Additionally, the advantages of nanocomposite membranes such as stability, antimicrobial properties, and adsorption processes have been discussed. The goal of this review was to summarize the remediation of harmful pollutants from water and wastewater/effluent using polymer matrix-based nanocomposite membrane technology, and to highlight its shortcomings and future prospects.
Collapse
|
7
|
Characterisation and modelling the mechanics of cellulose nanofibril added polyethersulfone ultrafiltration membranes. Heliyon 2023; 9:e13086. [PMID: 36785816 PMCID: PMC9918776 DOI: 10.1016/j.heliyon.2023.e13086] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/14/2022] [Revised: 01/12/2023] [Accepted: 01/16/2023] [Indexed: 01/22/2023] Open
Abstract
The performance of the membranes can be improved by adding the appropriate amount of nanomaterials to the polymeric membranes that can be used for water/wastewater treatment. In this study, the effects of polyvinylpyrrolidone (PVP), the impact of different amounts (0.5% and 1% wt.) of cellulose nanofibril (CNF), and the combined effects of PVP-CNF on the properties/performance of the polyethersulfone-based (PES-based) membrane are investigated. All PES-based ultrafiltration (UF) membranes are manufactured employing the phase inversion method and characterised via Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and the relevant techniques to determine the properties, including porosity, mean pore size, contact angle, water content, and pure water flux tests. Furthermore, the thermal properties of the prepared membranes are investigated using thermal gravimetric analysis (TGA) and differential thermal analysis (DTA) techniques. Experimental and numerical methods are applied for the mechanical characterisation of prepared membranes. For the experimental process, tensile tests under dry and wet conditions are conducted. The finite element (FE) method and Mori-Tanaka mean-field homogenisation are used as numerical methods to provide more detailed knowledge of membrane mechanics.
Collapse
|
8
|
Cellulose nanofiber-poly(ethylene terephthalate) nanocomposite membrane from waste materials for treatment of petroleum industry wastewater. JOURNAL OF HAZARDOUS MATERIALS 2023; 442:129955. [PMID: 36179628 DOI: 10.1016/j.jhazmat.2022.129955] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/21/2022] [Revised: 08/28/2022] [Accepted: 09/06/2022] [Indexed: 06/16/2023]
Abstract
Petroleum industry wastewater contains high level of crude oil and other types of organic substances that can cause immense harm to the agriculture, aquatic as well as terrestrial organisms. Organic solvent resistance of membranes is very important to treat such wastewater that contains high level of organic pollutants. This work reports the designing of a superhydrophilic and organic solvent resistant nanocomposite membrane using waste bottles made of poly(ethylene terephthalate) (PET) and cellulosic papers. Using in-situ synthesized cellulose nanofibers we could successfully fabricate porous membranes which is not possible for bare PET matrix using water as nonsolvent. Thus, we could successfully replace methanol which was used as a suitable non-solvent in earlier reports by distilled water. We successfully used the membrane for separation of synthetic crude oil-water emulsion. The membrane showed permeability up to 98 Lm-2h-1 applying pressure of 1.5 bar. The membrane also achieved removal of more than 97 % of organic substances from a crude oil-water emulsion system. The optimum membrane also showed good thermal stability with initial degradation temperature ∼350 °C and tensile strength of 0.86 MPa. The antimicrobial property of the nanocomposite membranes could be achieved by coating its surface with carbon dots rooted graphene oxide.
Collapse
|
9
|
Treatment of textile industry wastewater by using high-performance forward osmosis membrane tailored with alpha-manganese dioxide nanoparticles for fertigation. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2022; 29:80032-80043. [PMID: 35426022 DOI: 10.1007/s11356-022-20047-x] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/25/2021] [Accepted: 03/29/2022] [Indexed: 06/14/2023]
Abstract
Forward osmosis (FO) technology has been acknowledged as an energy-efficient cutting-edge water treatment innovation; however, the inefficient performance of polymer-based membranes remains a tailback in the practical utilization of FO. A significant issue in FO is membrane fouling, which negatively influences the flux efficiency, working expenses and membrane life expectancy. Membranes having high water flux and minimum reverse solute flux at low operating pressures are the ideal membranes for this process. This study reports a thin-film nanocomposite (TFNC) membrane for the treatment of textile industry wastewater utilizing fertilizer as draw solution fabricated via the phase inversion process. The chemical structure and morphology of the synthesized manganese oxide (MnO2) incorporated membrane were studied by various characterization techniques like X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy-energy-dispersive X-ray spectroscopy, contact angle and gravimetry. The outcomes demonstrated that the nanoparticles were bonded to cellulose acetate polymer via covalent bonds and showed very hydrophilic membrane surface, along with an increased osmotic water flux of 52.5 L.m2.h-1 and reverse salt flux of 10.9 g.m2.h-1, when deionized wastewater and potassium chloride were used as the feed solution and the draw solution, respectively. In this manner, incorporating manganese oxide into the FO membrane may introduce its extraordinary possible application for the production of diluted fertilizer solution with balanced nutrients.
Collapse
|
10
|
Influence of alumina nanoparticles on the performance of polyacrylonitrile membranes in MBR. JOURNAL OF ENVIRONMENTAL HEALTH SCIENCE & ENGINEERING 2022; 20:375-384. [PMID: 35669801 PMCID: PMC9163238 DOI: 10.1007/s40201-021-00784-w] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/01/2021] [Accepted: 12/28/2021] [Indexed: 06/15/2023]
Abstract
This study aims to investigate the effect of using Al2O3 nanoparticles (NPs) in membrane structure on the operation condition of the membrane bioreactor. To this end, alumina NPs as the high hydrophilic agents with an approximate size of 40 nm and a concentration of 0-3 wt.% were placed within the PAN polymeric membrane matrix structure with high hydrophilicity and high mechanical resistance over the others via the phase inversion method. Characterization of synthesized nanocomposite membranes was carried out by SEM analysis. In the presence of the alumina NPs, the porosity of the membranes improved. The water contact angle measurement confirmed the superior hydrophilicity of mixed PAN membranes compared to the pure polymeric membranes. The best nanocomposite membrane with better antifouling properties was selected to evaluate the MBR's performance in wastewater treatment and assessed in terms of the resistance, flux recovery, and COD removal rates. The result of a comparison with pure membrane showed that by increasing the Al2O3 amount up to 2wt.%, irreversible fouling resistance mitigated as much as 50%. Moreover, the flux recovery ratio was increased by 15%, and the COD removal rate was also raised as large as 16%. Our investigation illustrated that the presence of alumina NPs has improved the MBR performance and decreased the irreversible fouling resistance of the membrane.
Collapse
|
11
|
Impact of a new functionalization of multiwalled carbon nanotubes on antifouling and permeability of PVDF nanocomposite membranes for dye wastewater treatment. CHEMOSPHERE 2022; 294:133699. [PMID: 35090853 DOI: 10.1016/j.chemosphere.2022.133699] [Citation(s) in RCA: 16] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/05/2021] [Revised: 12/29/2021] [Accepted: 01/17/2022] [Indexed: 06/14/2023]
Abstract
Here, novel hydroxyl and carboxyl functionalized multiwalled carbon nanotubes (AHF-MWCNT and ACF-MWCNT) were successfully synthesized and introduced for modification and antifouling improvement of the PVDF membrane. The blending effect of AHF-MWCNT and ACF-MWCNT on the morphology and surface properties of the PVDF membrane was explored by SEM, AFM, water contact angle, and zeta potential analysis. The results indicated that the membrane surface has become more hydrophilic, smoother as well more negative. In addition, the overall porosity and mean pore radius are increased by MWCNTs embedding. The filtration performance, antifouling and dye separation of the nanocomposite membranes were improved by adding any amounts of AHF-MWCNT and ACF-MWCNT in the PVDF membrane matrix. The carboxylic modification presented better performance than the hydroxyl functionalization. The 0.1 wt% ACF-MWCNT blended membrane presented an optimum performance with 46 L m-2 h-1 bar-1 permeability, 93% FRR, and 97.3% dye rejection. Consequently, embedding functionalized MWCNT in the PVDF membrane matrix was led to improvement of membrane characteristics and enhancement of pure water flux, antifouling feature, and dye separation. So, the functionalized MWCNT could be a promising additive for the PVDF membrane modification.
Collapse
|
12
|
Sulphonated polyhedral oligomeric silsesquioxane/sulphonated poly ether ether ketone nanocomposite membranes for microbial fuel cell: Insights to the miniatures involved. CHEMOSPHERE 2020; 260:127593. [PMID: 32679377 DOI: 10.1016/j.chemosphere.2020.127593] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/20/2020] [Revised: 06/28/2020] [Accepted: 06/29/2020] [Indexed: 06/11/2023]
Abstract
In this study we demonstrate Sulphonated Polyhedral oligomeric silsesquioxane (S-POSS) incorporated Sulphonated Poly Ether Ether Ketone (SPEEK) as an effective cation exchange membrane (CEM) for improving performance and sustainability in a fabricated tubular Microbial Fuel Cell (MFC). The organic-inorganic caged frame of S-POSS enables several ion conducting channels thereby resulting in better proton conductivity and water uptake in addition to hydroxide ions native in POSS. Among the membranes, SPEEK+ 5 wt% S-POSS exhibits a highest maximum performance of 162 ± 1.4 mW m-2 with the highest IEC of 1.8 ± 0.05 meq g-1. Microbial community analysis reveals the predominance of several bacterial strains contributing to wide range of mechanisms. Three phyla including Betaproteobacteria, Gammaproteobacteria and Firmicutes showed maximum predominance. In addition to a novel nanocomposite membrane, the present research introduces perceptions of two metabolic mechanisms of the microbial community available which opens pathway for future insights on how other miniatures involve in electron transfer mechanisms.
Collapse
|
13
|
2D titanium carbide(MXene) nanosheets and 1D hydroxyapatite nanowires into free standing nanocomposite membrane: in vitro and in vivo evaluations for bone regeneration. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2020; 118:111367. [PMID: 33254986 DOI: 10.1016/j.msec.2020.111367] [Citation(s) in RCA: 27] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/10/2019] [Revised: 07/19/2020] [Accepted: 07/30/2020] [Indexed: 02/05/2023]
Abstract
Bone loss or insufficiency remains a great challenge for implant integrated and subsequently functional loading, where developing biomaterials to augment bone quantity and regenerate alveolar bone defects at implant site is vitally necessary. Recently, MXene, as a large new family of 2D materials, exhibits a great prospect in biomedical applications owing to its ultrathin structure and morphology with a range of extraordinary properties such as chemical, electronic, optical and biological properties etc. Besides, hydroxyapatite is a favorable biomaterial with outstanding bioactivity and osteogenic capacity. In this study, we prepared free standing UHAPNWs/MXene nanocomposite membranes via introducing ultralong hydroxyapatite nanowires (UHAPNWs) with different weight ratios into MXene to explore their potential in bone regeneration. SEM, XPS, FTIR, XRD, tensile strength, Young's modulus and water contact angles were used to characterize the morphology, chemical composition, surface properties, mechanical properties and hydrophilicity of the materials. Subsequently, in vitro studies like cell adhesion, proliferation and osteogenic differentiation of MC3T3-E1 were evaluated. The incorporation of UHAPNWs improved mechanical properties and hydrophilicity with an enhancement in cell adhesion, proliferation, and osteogenic differentiation. More importantly, 10 wt% UHAPNWs/MXene exhibited the optimal mechanical properties while biological improvement was more pronounced along with the addition of UHAPNWs when the weight fraction of UHAPNWs was from 0 to 30 wt%. Furthermore, in vivo experiments the UHAPNWs/MXene nanocomposite membranes effectively enhanced bone tissue formation quantitatively and qualitatively in a rat calvarial bone defect. Therefore, an appropriate amount of UHAPNWs into MXene plays a positive and evident role in enhancing mechanical properties, biocompatibility and osteoinductivity, leading a novel inorganic composite material for regeneration of bone tissue.
Collapse
|
14
|
Antimicrobial and antifouling properties of versatile PPSU/carboxylated GO nanocomposite membrane against Gram-positive and Gram-negative bacteria and protein. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2018; 25:34103-34113. [PMID: 30284164 DOI: 10.1007/s11356-018-3212-7] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/19/2018] [Accepted: 09/12/2018] [Indexed: 06/08/2023]
Abstract
Biofouling is a serious issue in membrane-based water and wastewater treatment as it critically compromises the efficacy of the water treatment processes. This investigation demonstrates the antimicrobial and antifouling properties of a nanocomposite membrane system composed of carboxyl-functionalized graphene oxide (COOH-GO) and polyphenylsulfone (PPSU). The PPSU/COOH-GO nanocomposite membrane exhibited excellent antimicrobial properties, achieving maximum bacteriostasis rates of 74.2% and 81.1% against the representative Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa, respectively) and 41.9% against the representative Gram-positive bacterium (Staphylococcus aureus). The PPSU/COOH-GO nanocomposite membrane inhibited the attachment, colonization, and the biofilm formation of three species. Antifouling was assessed through filtration experiments using a model foulant bovine serum albumin (BSA). The fouling mechanisms were investigated by Hermia's models (complete blocking, intermediate blocking, standard blocking, and cake formation), and the analysis involved fitting the volumetric flux decline experimental data to models. The fouling study revealed a less irreversible fouling and increased flux recovery ratio for the PPSU/COOH-GO nanocomposite membrane. Complete blocking of pores and cake formation were the major fouling mechanisms for the membrane.
Collapse
|
15
|
Photoluminescence modulation of silicon nanoparticles via highly ordered arrangement with phospholipid membranes. Colloids Surf B Biointerfaces 2018; 170:656-662. [PMID: 29986261 DOI: 10.1016/j.colsurfb.2018.06.066] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/19/2018] [Revised: 06/12/2018] [Accepted: 06/30/2018] [Indexed: 11/18/2022]
Abstract
Highly ordered self-assembly of nanoparticles (NPs) in a large scale promises attractive potential in optical modulation of the NPs for illuminating, imaging and sensing applications. In this work, a type of multi-lamellar nanocomposite membranes composed of phospholipid multilayers and Si NPs sandwiched between each adjacent lipid layers was fabricated via a facile co-assembly method. X-ray reflectivity (XRR), grazing incident X-ray diffraction (GIXRD) and TEM measurements verified the highly ordered arrangement of NPs within the multilayers with a controlled in-plane inter-particle separation from ∼7 nm to ∼14 nm. Due to such an arrangement, the photoluminescence (PL) properties of the Si NPs were effectively modulated. Compared to the NPs in suspension or its pure film, the PL of the NPs in the membranes blue-shifted and remarkably narrowed, with the full-width-at-half-maximum (FWHM) value reduced from >110 nm of the pure Si NP film to below 43 nm. The radiative lifetime of the NPs was also significantly reduced from ∼16.7 ns to ∼3.3 ns depending on the inter-particle distance in the membrane. Meanwhile, the Si NPs within membranes maintained robust photostability under UV irradiation.
Collapse
|
16
|
Preparation and characterization of PSF/PEI/CaCO 3 nanocomposite membranes for oil/water separation. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2018; 25:25315-25326. [PMID: 29946841 DOI: 10.1007/s11356-018-2615-9] [Citation(s) in RCA: 17] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/01/2018] [Accepted: 06/18/2018] [Indexed: 06/08/2023]
Abstract
Ultrafiltration (UF) is one of the significant advanced processes for oily wastewater treatment due to its clear advantages, for instance, ease in operation and efficient separation. The main drawback of these processes is the fouling problem and many researchers' effort on fabrication of high-performance membranes with higher hydrophilicity and antifouling properties. In this study, flat-sheet polysulfone (PSF)/polyethylenimine (PEI)/CaCO3 nanocomposite membranes were prepared by phase inversion method for oil/water emulsion separation. Structural properties of membranes were characterized by SEM, FT-IR, contact angle, tensile strength, and atomic force microscopy analysis. Increasing the CaCO3 nanoparticle loading exhibited the increased the water flux and BSA rejection. PSF/PEI/10 wt% CaCO3 nanocomposite membranes have 145 L/m2 h water flux at 2 bar with a contact angle of 84° and with 92% BSA rejection. All prepared CaCO3 nanocomposite membranes reached similar oil rejections at above 90%. Besides the higher water flux and oil removal efficiencies, 10 wt% of CaCO3 nanoparticle-blended PSF membranes has notable antifouling capacity with the highest flux recovery ratio (FRR) and lowest flux decay ratio (DR) values. The results showed that there is a great potential to use PSF/PEI/CaCO3 nanocomposite membranes for the treatment of oil water emulsions with higher permeability and antifouling capacity.
Collapse
|
17
|
Preparation and in vitro evaluation of polycaprolactone/PEG/bioactive glass nanopowders nanocomposite membranes for GTR/GBR applications. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2018; 90:236-247. [PMID: 29853087 DOI: 10.1016/j.msec.2018.04.065] [Citation(s) in RCA: 32] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/18/2017] [Revised: 12/24/2017] [Accepted: 04/20/2018] [Indexed: 12/20/2022]
Abstract
In the present study, nanocomposite membranes are investigated using poly-ε-caprolactone (PCL), polyethylene glycol (PEG) and bioactive glass nanopowders (BGs) synthesized via solvent casting method with different reinforcement rates of BGs consisting of 3, 5 and 7 wt% for regenerating the periodontal tissue in vitro. These prepared membranes were evaluated by a vast range of essential tests; including Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), Transmition-electron microscopy (TEM), tensile testing before and after soaking in PBS solution, degradation and contact angle assessments as well as cell culture assays. In spite of the fact that the percentage of Cu incorporated into BGs was trivial, this negligible amount exerted major cytotoxic impact upon cells during in vitro cell tests. According to the results, the blended-membrane contained 7 wt% copper-free BGs indicated optimum characteristics including satisfactory mechanical and biodegradation features, more wettable surface, higher proliferation rates of adipose-derived stem cells (ADSCs), superior ALP activity and brilliant bone mineralization capacity which was confirmed by Alizarin red assay. As a consequence, it can be used as a desirable candidate for guided tissue/bone regeneration (GTR/GBR) to accelerate bone tissue healing.
Collapse
|
18
|
Engineered Iron/Iron Oxide Functionalized Membranes for Selenium and Other Toxic Metal Removal from Power Plant Scrubber Water. J Memb Sci 2015; 488:79-91. [PMID: 26327740 PMCID: PMC4552196 DOI: 10.1016/j.memsci.2015.03.089] [Citation(s) in RCA: 62] [Impact Index Per Article: 6.9] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
The remediation of toxic metals from water with high concentrations of salt has been an emerging area for membrane separation. Cost-effective nanomaterials such as iron and iron oxide nanoparticles have been widely used in reductive and oxidative degradation of toxic organics. Similar procedures can be used for redox transformations of metal species (e.g. metal oxyanions to elemental metal), and/or adsorption of species on iron oxide surface. In this study, iron-functionalized membranes were developed for reduction and adsorption of selenium from coal-fired power plant scrubber water. Iron-functionalized membranes have advantages over iron suspension as the membrane prevents particle aggregation and dissolution. Both lab-scale and full-scale membranes were prepared first by coating polyvinylidene fluoride (PVDF) membranes with polyacrylic acid (PAA), followed by ion exchange of ferrous ions and subsequent reduction to zero-valent iron nanoparticles. Water permeability of membrane decreased as the percent PAA functionalization increased, and the highest ion exchange capacity (IEC) was obtained at 20% PAA with highly pH responsive pores. Although high concentrations of sulfate and chloride in scrubber water decreased the reaction rate of selenium reduction, this was shown to be overcome by integration of nanofiltration (NF) and iron-functionalized membranes, and selenium concentration below 10 μg/L was achieved.
Collapse
|