1
|
Du P, Cui Z, Xiang T, Li Y, Zhang L, Cai Z, Zhao M, Xie G. Optimizing the cell compatibility and mechanical properties in TiZrNbTa medium-entropy alloy/β-Ti composites through phase transformation. Acta Biomater 2024:S1742-7061(24)00232-0. [PMID: 38723926 DOI: 10.1016/j.actbio.2024.05.004] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/24/2023] [Revised: 04/26/2024] [Accepted: 05/01/2024] [Indexed: 05/16/2024]
Abstract
Medium-entropy alloys (MEAs) typically exhibit outstanding mechanical properties, but their high Young's modulus results in restricted clinical applications. Mismatched Young's modulus between implant materials and human bones can lead to "stress shielding" effects, leading to implant failure. In contrast, β-Ti alloys demonstrate a lower Young's modulus compared to MEAs, albeit with lower strength. In the present study, based on the bimodal grain size distribution (BGSD) strategy, a series of high-performance TiZrNbTa/Ti composites are obtained by combining TiZrNbTa MEA powders with nano-scale grain sizes and commercially pure Ti (CP-Ti) powders with micro-scale grain sizes. Concurrently, Zr, Nb, and Ta that are β-Ti stabilizer elements diffuse into Ti, inducing an isomorphous transformation in Ti from the high Young's modulus α-Ti phase to the low Young's modulus β-Ti phase at room temperature, optimizing the mechanical biocompatibility. The TiZrNbTa/β-Ti composite demonstrates a yield strength of 1490 ± 83 MPa, ductility of 20.7 % ± 2.9 %, and Young's modulus of 87.6 ± 1.6 GPa. Notably, the yield strength of the TiZrNbTa/β-Ti composite surpasses that of sintered CP-Ti by 2.6-fold, and its ductility outperforms TiZrNbTa MEA by 2.3-fold. The Young's modulus of the TiZrNbTa/β-Ti composite is reduced by 28 % and 36 % compared to sintered CP-Ti and TiZrNbTa MEA, respectively. Additionally, it demonstrates superior biocompatibility compared to CP-Ti plate, sintered CP-Ti, and TiZrNbTa MEA. With a good combination of mechanical properties and biocompatibility, the TiZrNbTa/β-Ti composite exhibits significant potential for clinical applications as metallic biomaterials. STATEMENT OF SIGNIFICANCE: This work combines TiZrNbTa MEA with nano-grains and commercially pure Ti with micro-grains to fabricate a TiZrNbTa/β-Ti composite with bimodal grain-size, which achieves a yield strength of 1490 ± 83 MPa and a ductility of 20.7 % ± 2.9 %. Adhering to the ISO 10993-5 standard, the TiZrNbTa/β-Ti composite qualifies as a non-cytotoxic material, achieving a Class 0 cytotoxicity rating and demonstrating outstanding biocompatibility akin to commercially pure Ti. Drawing on element diffusion, Zr, Nb, and Ta serve not only as solvent atoms to achieve solid-solution strengthening but also as stabilizers for the transformation of the β-Ti crystal structure. This work offers a novel avenue for designing advanced biomedical Ti alloys with elevated strength and plasticity alongside a reduced Young's modulus.
Collapse
Affiliation(s)
- Peng Du
- School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China; Institute of Intelligent Manufacturing Technology, Shenzhen Polytechnic University, ShenZhen, 518055, China
| | - Zhi Cui
- Department of Orthopedic, The First Affiliated Hospital, Hengyang Medical School, University of South China, Hengyang, 421000, China; Zhejiang Cancer Hospital, Hangzhou Institute of Medicine (HIM), Chinese Academy of Sciences, Hangzhou, 310000, China
| | - Tao Xiang
- School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - Yunping Li
- State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, China
| | - Liang Zhang
- Institute of Intelligent Manufacturing Technology, Shenzhen Polytechnic University, ShenZhen, 518055, China
| | - Zeyun Cai
- School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - Ming Zhao
- Zhejiang Cancer Hospital, Hangzhou Institute of Medicine (HIM), Chinese Academy of Sciences, Hangzhou, 310000, China.
| | - Guoqiang Xie
- School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China; State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, China; State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China.
| |
Collapse
|
2
|
Lapuk SE, Mukhametzyanov TA, Schick C, Gerasimov AV. Stability of Rapidly Crystallizing Sulfonamides Glasses by Fast Scanning Calorimetry: Crystallization Kinetics and Glass-Forming Ability. J Pharm Sci 2024; 113:1257-1264. [PMID: 38070775 DOI: 10.1016/j.xphs.2023.12.001] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/04/2023] [Revised: 12/01/2023] [Accepted: 12/01/2023] [Indexed: 04/19/2024]
Abstract
Production and evaluation of the kinetic stability of the amorphous forms of active pharmaceutical ingredients are among the current challenges of modern pharmaceutical science. In the present work, amorphous forms of several sulfonamides were produced for the first time using Fast Scanning calorimetry. The parameters, characterizing the glass-forming ability of the compounds, i.e. the critical cooling rate of the melt and the kinetic fragility, were determined. The cold crystallization kinetics was studied using both isothermal and non-isothermal approaches. The results of the present study will contribute to the development of approaches for producing amorphous forms of rapidly crystallizing active pharmaceutical ingredients.
Collapse
Affiliation(s)
- S E Lapuk
- Department of Physical Chemistry, A.M. Butlerov Institute of Chemistry, Kazan Federal University, 420008, Kremlevskaya, 18, Kazan, Russia
| | - T A Mukhametzyanov
- Department of Physical Chemistry, A.M. Butlerov Institute of Chemistry, Kazan Federal University, 420008, Kremlevskaya, 18, Kazan, Russia
| | - C Schick
- Universitat Rostock, Institute of Physics, Albert-Einstein_str. 23-24, Rostock, DE 18051, Germany
| | - A V Gerasimov
- Department of Physical Chemistry, A.M. Butlerov Institute of Chemistry, Kazan Federal University, 420008, Kremlevskaya, 18, Kazan, Russia.
| |
Collapse
|
3
|
Lei Q, Zhou K, Zhang X, Salih KAM, Peng C, He D, Chen W. Clean and efficient synthesis of LiFePO 4 cathode material using titanium white waste and calcium dihydrogen phosphate. Waste Manag 2024; 174:362-370. [PMID: 38101232 DOI: 10.1016/j.wasman.2023.12.019] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/09/2023] [Revised: 11/21/2023] [Accepted: 12/10/2023] [Indexed: 12/17/2023]
Abstract
Large amounts of titanium white waste are generated in the production of titanium dioxide using sulphate method, which in turn can be used to prepare LiFePO4 cathode material, thereby reducing environmental risks and achieving resource recovery. However, a key challenge lies in the elimination of impurities. In this work, a cost-efficient and straightforward approach based on phase transformation during hydrothermal treatment was proposed to utilize titanium white waste with calcium dihydrogen phosphate for the preparation of LiFePO4 cathode material. The content of Fe in the leachate was enriched to 81.5 g/L after purification, while 99.9 % of Ti and 98.36 % of Al and were successfully removed. In the subsequent process for Fe/P mother liquor preparation, the losses of Fe and P were only 5.82 % and 2.81 %, respectively. The Fe and P contents of the synthesized FePO4 product were 29.47 % and 17.08 %, respectively, and the Fe/P molar ratio was 0.986. Crystal phase of the product matched well with standard iron phosphate, and the lamellar microstructure of FePO4 was uniform with the particle size ranging from 3 to 5 μm. Moreover, the contents of impurities in the product were far below the standard. The initial discharge of LiFePO4 synthesized by the iron phosphate was 160.6 mAh.g-1 at 0.1C and maintained good reversible capacity after 100 cycles. This work may provide new strategy for preparing LiFePO4 cathode material from industrial solid waste.
Collapse
Affiliation(s)
- Qingyuan Lei
- School of Metallurgy and Environment, Central South University, Changsha 410083, China
| | - Kanggen Zhou
- School of Metallurgy and Environment, Central South University, Changsha 410083, China
| | - Xuekai Zhang
- School of Metallurgy and Environment, Central South University, Changsha 410083, China
| | - Khalid A M Salih
- School of Metallurgy and Environment, Central South University, Changsha 410083, China
| | - Changhong Peng
- School of Metallurgy and Environment, Central South University, Changsha 410083, China
| | - Dewen He
- School of Metallurgy and Environment, Central South University, Changsha 410083, China
| | - Wei Chen
- School of Metallurgy and Environment, Central South University, Changsha 410083, China.
| |
Collapse
|
4
|
Alao AR. Optimization of surface roughness, phase transformation and shear bond strength in sandblasting process of YTZP using statistical machine learning. J Mech Behav Biomed Mater 2024; 150:106245. [PMID: 37992583 DOI: 10.1016/j.jmbbm.2023.106245] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/20/2023] [Revised: 11/10/2023] [Accepted: 11/13/2023] [Indexed: 11/24/2023]
Abstract
Sandblasting process is often applied to roughen the intaglio of yttria tetragonal zirconia polycrystals (YTZP) surfaces for easy and quality adhesion and micro-shear retention with dentine/resin cements. Sandblasting process parameters have shown to influence, at different scales, surface roughness, phase transformation and shear bond strength, all of which are referred, herein, as performance characteristics. This study aimed to find the parametric settings of sandblasting parameters that could simultaneously optimize these performance characteristics, hypothetically testing the probability. YTZP surfaces were sandblasted at different levels of incidence angle (IA), abrasive particle size (AP), pressure(P) and sandblasting time (ST) following the Taguchi method based on the two-level parametric process settings (L8(27)). Surface morphologies, roughness (SR), monoclinic content (MC), and shear bond strength (SS) were characterized by the SEM, average surface roughness, XRD, and shear bond strength tests, respectively. Rough surfaces containing scratches, plastic deformation streaks, micro cracks and pitting were observed. According to the Taguchi method, the same optimum sandblasting parametric setting maximized SR and MC but failed to maximize SS. Subsequently, the principal component analysis embedded in statistical machine learning was applied to find the optimum sandblasting parametric setting that maximized all the performance characteristics. The optimum sandblasting setting of IA = 45°, AP = 110 μm, ST = 20 s and P = 400 kPa predicted the maximum values of SR = 0.773 μm, MC = 36% and SS = 16.6 MPa. Analysis of variance confirmed AP and P as the most influencing parameters affecting all performance characteristics. Finally, these results provide a systematic and comprehensive route for optimizing sandblasting roughening of YTZP surfaces which can be adopted in adhesive dental and orthodontic industry.
Collapse
Affiliation(s)
- Abdur-Rasheed Alao
- Mechanical Engineering Programme Area, Faculty of Engineering, Universiti Teknologi Brunei, Gadong, BE1410, Brunei Darussalam; Wellness Research Thrust, Universiti Teknologi Brunei, Gadong, BE1410, Brunei Darussalam.
| |
Collapse
|
5
|
Long Y, Song Y, Huang H, Yang Y, Shen D, Geng H, Ruan J, Gu F. Transformation behavior of heavy metal during Co-thermal treatment of hazardous waste incineration fly ash and slag/electroplating sludge. J Environ Manage 2024; 351:119730. [PMID: 38086123 DOI: 10.1016/j.jenvman.2023.119730] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/02/2023] [Revised: 11/11/2023] [Accepted: 11/25/2023] [Indexed: 01/14/2024]
Abstract
In this study, the behavior of heavy metal transformation during the co-thermal treatment of hazardous waste incineration fly ash (HWIFA) and Fe-containing hazardous waste (including hazardous waste incineration bottom slag (HWIBS) and electroplating sludge (ES)) was investigated. The findings demonstrated that such a treatment effectively reduced the static leaching toxicity of Cr and Pb. Moreover, when the treatment temperature exceeded 1000 °C, the co-thermal treated sample exhibited low concentrations of dynamically leached Cr, Pb, and Zn, indicating that these heavy metals were successful detoxified. Thermodynamic analyses and phase transformation results suggested that the formation of spinel and the gradual disappearance of chromium dioxide in the presence of Fe-containing hazardous wastes contributed to the solidification of chromium. Additionally, the efficient detoxification of Pb and Zn was attributed to their volatilization and entry into the liquid phase during the co-thermal treatment process. Therefore, this study sets an excellent example of the co-thermal treatment of hazardous wastes and the control of heavy metal pollution during the treatment process.
Collapse
Affiliation(s)
- Yuyang Long
- School of Environmental Science and Engineering, Zhejiang Provincial Key Laboratory of Solid Waste Treatment and Recycling, Zhejiang Engineering Research Center of Non-ferrous Metal Waste Recycling, Zhejiang Gongshang University, Hangzhou, Zhejiang, 310012, China
| | - Yuhe Song
- School of Environmental Science and Engineering, Zhejiang Provincial Key Laboratory of Solid Waste Treatment and Recycling, Zhejiang Engineering Research Center of Non-ferrous Metal Waste Recycling, Zhejiang Gongshang University, Hangzhou, Zhejiang, 310012, China
| | - HuanLin Huang
- Hangzhou Guiyuan Environmental Technology Co. Ltd, Hangzhou, Zhejiang, 310012, China
| | - Yuqiang Yang
- Hangzhou Guiyuan Environmental Technology Co. Ltd, Hangzhou, Zhejiang, 310012, China
| | - Dongsheng Shen
- School of Environmental Science and Engineering, Zhejiang Provincial Key Laboratory of Solid Waste Treatment and Recycling, Zhejiang Engineering Research Center of Non-ferrous Metal Waste Recycling, Zhejiang Gongshang University, Hangzhou, Zhejiang, 310012, China
| | - Hairong Geng
- Zhejiang Huiheyuan Environmental Technology Co. Ltd., Jiaxing, Zhejiang, 314200, China
| | - Jinmu Ruan
- Shaoxing Shangyu Zhonglian Environmental Protection Co. Ltd., Shaoxing, Zhejiang, 312300, China
| | - Foquan Gu
- School of Environmental Science and Engineering, Zhejiang Provincial Key Laboratory of Solid Waste Treatment and Recycling, Zhejiang Engineering Research Center of Non-ferrous Metal Waste Recycling, Zhejiang Gongshang University, Hangzhou, Zhejiang, 310012, China.
| |
Collapse
|
6
|
Huang X, Chen M, Li G, Wang P. Constructing α-MnO 2/Mn 2O 3 heterojunction for formaldehyde oxidation. Chemosphere 2024; 349:140959. [PMID: 38104731 DOI: 10.1016/j.chemosphere.2023.140959] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/16/2023] [Revised: 11/28/2023] [Accepted: 12/12/2023] [Indexed: 12/19/2023]
Abstract
Constructing heterojunctions with oxygen defect-rich structures and abundant phase interfaces poses an appealing yet challenging task in the development of non-precious metal oxide catalysts for formaldehyde (HCHO) oxidation. Herein, we present a simple and efficient method for fabricating highly active manganese oxide heterojunction catalysts for HCHO oxidation. This method involves the hydrothermal synthesis of a nanostructured α-MnO2/γ-MnOOH composite, followed by mechanical milling-induce phase transformation of γ-MnOOH to Mn2O3. Importantly, mechanical milling not only creates the heterojunction but also imparts oxygen defect-rich structures and an abundant phase interface to the catalyst. The resulting α-MnO2/Mn2O3 heterojunction exhibits outstanding performance in HCHO oxidation, comparable to the best non-precious metal oxide catalysts reported thus far. It achieves a 100% conversion of 100 ppm HCHO under a gas hourly space velocity of 120 L gcat-1 h-1 at 80 °C, corresponding to a mass-specific reaction rate of 8.92 μmol g-1 min-1 and an area-specific reaction rate of 0.18 μmol m-2 min-1. Based on the control experiments using in situ diffuse reflectance infrared Fourier transform spectroscopy combined with online gas chromatography, we gained insights into the mechanism of HCHO oxidation over the α-MnO2/Mn2O3 catalyst and the functional roles played by its component phases.
Collapse
Affiliation(s)
- Xuelin Huang
- School of Materials Science and Engineering, South China University of Technology, Guangzhou, 510641, PR China
| | - Muhua Chen
- School of Materials Science and Engineering, South China University of Technology, Guangzhou, 510641, PR China.
| | - Guangyao Li
- School of Materials Science and Engineering, South China University of Technology, Guangzhou, 510641, PR China
| | - Ping Wang
- School of Materials Science and Engineering, South China University of Technology, Guangzhou, 510641, PR China.
| |
Collapse
|
7
|
You GE, Lim MJ, Min KS, Yu MK, Lee KW. Surface property changes observed in zirconia during etching with high-concentration hydrofluoric acid over various immersion times. Dent Mater J 2024; 43:52-57. [PMID: 38044145 DOI: 10.4012/dmj.2023-091] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/05/2023]
Abstract
This study investigated the degree of phase transformation, surface roughness, and bond strength of zirconia immersed for various times in a 40% hydrofluoric acid (HF) solution. Non-etched sintered zirconia specimens were used as the control, while experimental groups were etched with a 40% HF solution for 5, 10, 20, 40, 80, 160 and 320 min. In each of the control and experimental groups, five specimens for X-ray diffraction analysis, four for surface morphology and surface roughness analysis, and ten for bonding strength measurement were used. As a result, the surface roughness of zirconia increased as the application time increased during the 40% HF etching, but the bond strength between zirconia and resin cement did not increase proportionally. The phase transformation from tetragonal to monoclinic also gradually increased with application time.
Collapse
Affiliation(s)
- Ga-Eul You
- Department of Conservative Dentistry, Jeonbuk National University School of Dentistry
| | - Myung-Jin Lim
- Department of Conservative Dentistry, Jeonbuk National University School of Dentistry
| | - Kyung-San Min
- Department of Conservative Dentistry, Jeonbuk National University School of Dentistry
- Research Institute of Clinical Medicine Jeonbuk National University-Biomedical Research Institute of Jeonbuk National University Hospital
| | - Mi-Kyung Yu
- Department of Conservative Dentistry, Jeonbuk National University School of Dentistry
- Research Institute of Clinical Medicine Jeonbuk National University-Biomedical Research Institute of Jeonbuk National University Hospital
| | - Kwang-Won Lee
- Department of Conservative Dentistry, Jeonbuk National University School of Dentistry
- Research Institute of Clinical Medicine Jeonbuk National University-Biomedical Research Institute of Jeonbuk National University Hospital
| |
Collapse
|
8
|
Sunarso, Rahmawati D, Irawan B, Pangesty AI. A novel method to fabricate monetite granules for bone graft applications. Dent Mater J 2024; 43:67-73. [PMID: 38072412 DOI: 10.4012/dmj.2023-133] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/02/2024]
Abstract
Monetite granules were reported to be able to balance osteoclastic resorption and new bone formation. However, to date, the dehydration of preset brushite has been the well-known method for preparing monetite granules. In the present study, for the first time, monetite granules could be prepared from the phase transformation of calcium sulfate dihydrate (CSD) granules through immersion in NaH2PO4 solution under hydrothermal conditions. CSD granules could be fully transformed into monetite granules at a reaction temperature of 125°C for 24 h. The obtained monetite granules were eight times more soluble in acetate buffer than in Tris-HCl buffer. Furthermore, monetite granules were two times more soluble in acetate buffer but comparable in Tris-HCl buffer compared to xenograft HA. The initial cytotoxicity test indicated that the novel monetite granules were nontoxic. In short, novel monetite granules were successfully prepared, exhibited better solubility in osteoclastic simulation than xenograft HA and were nontoxic.
Collapse
Affiliation(s)
- Sunarso
- Department of Dental Materials Science, Faculty of Dentistry, Universitas Indonesia
| | - Dyah Rahmawati
- Postgraduate Program, Department of Dental Materials Science, Faculty of Dentistry, Universitas Indonesia
| | - Bambang Irawan
- Department of Dental Materials Science, Faculty of Dentistry, Universitas Indonesia
| | - Azizah Intan Pangesty
- Department of Metallurgical and Material Engineering, Faculty of Engineering, Universitas Indonesia
| |
Collapse
|
9
|
Xu F, Dong R, Cui J, Zhang Y, Ren W, Song K, Meng S, Zhang R, Li K, Bai J, Qin Z. Transformation of crystal structure induced by the temperatures in carbon dots (CDs)-based composites with multicolor fluorescence for white Light-Emitting-Diode (WLED). Spectrochim Acta A Mol Biomol Spectrosc 2024; 310:123958. [PMID: 38281462 DOI: 10.1016/j.saa.2024.123958] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/06/2023] [Revised: 12/29/2023] [Accepted: 01/22/2024] [Indexed: 01/30/2024]
Abstract
Regulation of the fluorescence through crystalizing from the matrix in the Carbon dots (CDs)-based solid-state materials has been verified to be one of the effective methods, yet there are not only challenges in preparing such materials efficiently, but also insufficient insight into their regulation mechanisms. Here, a one-pot solvothermal route to synthesize a series of CDs-based composites with crystalline matrix is reported. These crystals exhibited multicolor fluorescence with the feature of multi-peaks emissions with increasing temperatures from 140 ℃ to 220 ℃, in which the orange emitting O-CDs@PA and the yellow emitting Y-CDs@PA crystals obtained the FLQYs of 22% and 68% respectively due to relatively stable crystalline structures. After comparative analysis to both crystals in detail, the core and the groups associated with them on the interface between CDs and matrix were adjusted in size and species during structural transformation of the crystal matrix, which changes radically the energy band structures to influence fluorescent emitting of both crystals ultimately. In addition, the reasons resulting in higher FLQY for Y-CDs@PA were provided leveraging the schematic illustration presumed based on the PL properties of both crystals. Because of the optimal optical performances, these fluorescent materials promised to fabricate WLED devices and obtained a number of photometric parameters endowed these WLED devices with the feature of warm-white light.
Collapse
Affiliation(s)
- Fengli Xu
- Shanxi Center of Technology Innovation for Light Manipulations and Applications, School of Applied Science, Taiyuan University of Science and Technology, Taiyuan 030024, the People's Republic of China
| | - Ruoyu Dong
- Shanxi Center of Technology Innovation for Light Manipulations and Applications, School of Applied Science, Taiyuan University of Science and Technology, Taiyuan 030024, the People's Republic of China
| | - Junchao Cui
- Shanxi Center of Technology Innovation for Light Manipulations and Applications, School of Applied Science, Taiyuan University of Science and Technology, Taiyuan 030024, the People's Republic of China
| | - Yufei Zhang
- Shanxi Center of Technology Innovation for Light Manipulations and Applications, School of Applied Science, Taiyuan University of Science and Technology, Taiyuan 030024, the People's Republic of China
| | - Weijie Ren
- Shanxi Center of Technology Innovation for Light Manipulations and Applications, School of Applied Science, Taiyuan University of Science and Technology, Taiyuan 030024, the People's Republic of China.
| | - Kai Song
- Shanxi Center of Technology Innovation for Light Manipulations and Applications, School of Applied Science, Taiyuan University of Science and Technology, Taiyuan 030024, the People's Republic of China
| | - Shuai Meng
- Shanxi Center of Technology Innovation for Light Manipulations and Applications, School of Applied Science, Taiyuan University of Science and Technology, Taiyuan 030024, the People's Republic of China
| | - Rui Zhang
- Shanxi Center of Technology Innovation for Light Manipulations and Applications, School of Applied Science, Taiyuan University of Science and Technology, Taiyuan 030024, the People's Republic of China
| | - Kun Li
- Shanxi Center of Technology Innovation for Light Manipulations and Applications, School of Applied Science, Taiyuan University of Science and Technology, Taiyuan 030024, the People's Republic of China
| | - Jingjing Bai
- Department of Materials Engineering, Taiyuan Institute of Technology, Taiyuan 030008, the People's Republic of China
| | - Zhenxing Qin
- Shanxi Center of Technology Innovation for Light Manipulations and Applications, School of Applied Science, Taiyuan University of Science and Technology, Taiyuan 030024, the People's Republic of China.
| |
Collapse
|
10
|
Han B, Liu J, Zhu R, Chen Q. Clay minerals inhibit the release of Cd(II) during the phase transformation of Cd(II)-ferrihydrite coprecipitates. J Hazard Mater 2024; 462:132723. [PMID: 37827108 DOI: 10.1016/j.jhazmat.2023.132723] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/10/2023] [Revised: 09/15/2023] [Accepted: 10/03/2023] [Indexed: 10/14/2023]
Abstract
Clay minerals and iron (hydr)oxides are important geosorbents in controlling the migration of heavy metal cations in the environment. Despite the widespread occurrence of clay minerals/iron (hydr)oxides composites, their complex mutual effects on the fate of heavy metal cations are not well recognized. In this work, we investigated the effect of clay minerals on the redistribution of Cd(II) during the phase transformation of ferrihydrite containing coprecipitated Cd(II) (Cd-Fh). Three systems were considered: i.e., Cd-Fh, Cd-Fh/kaolinite composite, and Cd-Fh/montmorillonite composite. Our results showed that the transformation of Fh into goethite and hematite caused the release of Cd(II), while the presence of kaolinite and montmorillonite inhibited the phase transformation of Fh and the release of Cd(II), with montmorillonite being more effective in these process. Multiple factors contributed to the reduced release of Cd(II), including the retarded transformation of Fh, the buffering of solution pH, and the re-adsorption of the released Cd(II). Our findings show that clay minerals have multiple effects in reducing the release of heavy metal cations from Fh during its transformation process, which sheds new light on understanding the critical roles of nanominerals in modulating the migration and bioavailability of heavy metal cations in the environment.
Collapse
Affiliation(s)
- Bin Han
- CAS Key Laboratory of Mineralogy and Metallogeny/Guangdong Provincial Key Laboratory of Mineral Physics and Materials, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences (CAS), Guangzhou 510640, China; CAS Center for Excellence in Deep Earth Science, Guangzhou 510640, China; University of Chinese Academy of Science, Beijing 100049, China
| | - Jing Liu
- State Key Laboratory of Lunar and Planetary Sciences, Macau University of Science and Technology, Taipa 999078, Macau.
| | - Runliang Zhu
- CAS Key Laboratory of Mineralogy and Metallogeny/Guangdong Provincial Key Laboratory of Mineral Physics and Materials, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences (CAS), Guangzhou 510640, China; CAS Center for Excellence in Deep Earth Science, Guangzhou 510640, China; University of Chinese Academy of Science, Beijing 100049, China
| | - Qingze Chen
- CAS Key Laboratory of Mineralogy and Metallogeny/Guangdong Provincial Key Laboratory of Mineral Physics and Materials, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences (CAS), Guangzhou 510640, China; CAS Center for Excellence in Deep Earth Science, Guangzhou 510640, China; University of Chinese Academy of Science, Beijing 100049, China.
| |
Collapse
|
11
|
Li Q, Zhang X, Zheng J, Qin J, Ou C, Liao Q, Si M, Yang Z, Yang W. Phase transformation of Cr(VI) host-mineral driven by citric acid-aided mechanochemical approach for advanced remediation of chromium ore processing residue-contaminated soil. J Hazard Mater 2024; 461:132530. [PMID: 37716262 DOI: 10.1016/j.jhazmat.2023.132530] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/27/2023] [Revised: 08/18/2023] [Accepted: 09/09/2023] [Indexed: 09/18/2023]
Abstract
The slow release of Cr(VI) from chromium ore processing residue-contaminated soil (COPR-soil) poses a significant environmental and health risk, yet advanced remediation techniques are still insufficient. Here, the slow-release behavior of Cr(VI) in COPR-soil is observed and attributed to the embedded Cr(VI) in the lattice of vaterite due to the isomeric substitution of CrO42- for CO32-. A citric acid-aided mechanochemical approach with FeS2/ZVI as reductive material was developed and found to be highly effective in remediating COPR-soil. Almost all Cr(VI) in COPR-soil, including Cr(VI) embedded in the minerals, are reduced with a reduction efficiency of 99.94%. Cr(VI) reduction kinetics indicate that the Cr(VI) reduction rate constant in the presence of citric acid was 4.8 times higher compared to its absence. According to the Raman spectroscopy, X-ray diffraction (XRD), and Electron Probe X-ray Micro-Analyzer (EPMA) analysis, the reduction of Cr(VI) embedded in vaterite was mainly attributed to the citric acid-induced protonation effect. That is, under the protonation effect, the embedded Cr(VI) could be released from vaterite through its phase transformation to calcite, whose affinity to Cr(VI) is low. While the reduction of released Cr(VI) could be promoted due to the complexation of citric acid with disulfide groups on FeS2/ZVI. The results of long-term stability tests demonstrated that the remediated COPR-soil exhibited excellent long-term stability, which may also be associated with improved utilization of available carbon and electron donors by the Cr(VI) reducing bacteria (Proteobacteria)-dominated microbial community in the presence of citric acid, thereby promoting to establish a stable reducing microenvironment. Collectively, these findings will further our understanding of the reduction remediation of COPR-soil, especially in the case of Cr(VI) embedded in minerals.
Collapse
Affiliation(s)
- Qi Li
- School of Metallurgy and Environment, Central South University, Changsha 410083, PR China
| | - Xiaoming Zhang
- School of Metallurgy and Environment, Central South University, Changsha 410083, PR China
| | - Junhao Zheng
- School of Metallurgy and Environment, Central South University, Changsha 410083, PR China
| | - Jingxi Qin
- School of Metallurgy and Environment, Central South University, Changsha 410083, PR China
| | - Chunyu Ou
- School of Metallurgy and Environment, Central South University, Changsha 410083, PR China
| | - Qi Liao
- School of Metallurgy and Environment, Central South University, Changsha 410083, PR China; Chinese National Engineering Research Centre for Control & Treatment of Heavy Metal Pollution, Changsha 410083, PR China
| | - Mengying Si
- School of Metallurgy and Environment, Central South University, Changsha 410083, PR China; Chinese National Engineering Research Centre for Control & Treatment of Heavy Metal Pollution, Changsha 410083, PR China
| | - Zhihui Yang
- School of Metallurgy and Environment, Central South University, Changsha 410083, PR China; Chinese National Engineering Research Centre for Control & Treatment of Heavy Metal Pollution, Changsha 410083, PR China
| | - Weichun Yang
- School of Metallurgy and Environment, Central South University, Changsha 410083, PR China; Chinese National Engineering Research Centre for Control & Treatment of Heavy Metal Pollution, Changsha 410083, PR China.
| |
Collapse
|
12
|
Wang G, Chen C, Li J, Yang F, Wang L, Lin X, Wu H, Zhang J. A clean method for gallium recovery and the coproduction of silica-potassium compound fertilizer and zeolite F from brown corundum fly ash. J Hazard Mater 2024; 461:132625. [PMID: 37776778 DOI: 10.1016/j.jhazmat.2023.132625] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/24/2023] [Revised: 09/14/2023] [Accepted: 09/23/2023] [Indexed: 10/02/2023]
Abstract
Brown corundum fly ash (BCFA) is a solid waste from the brown corundum smelting process that contains abundant Ga, K, Si, and Al, but effectively extracting Ga can be challenging since most of it is located inside the particles. This study proposes a comprehensive utilization method of BCFA that combines hydrothermal leaching and alkali regeneration to extract Ga efficiently while producing silica-potassium compound fertilizer (SPCF) and zeolite F. By utilizing the transformation of phase and structure in the hydrothermal leaching process, Ga extraction is efficiently achieved. The results showed that under the conditions of 210 g/L KOH concentration, a liquidsolid ratio of 25 mL/g, and 160 °C hydrothermal leaching for 60 min, the extraction efficiencies of Ga, K, and Si were 95.91 %, 51.78 %, and 69.57 %, respectively. The solid product's effective SiO2 and K2O contents increased to 24.72 wt% and 17.74 wt%, respectively, which can be further used as SPCF for agricultural production. The hydrothermal leaching solution was regenerated by adjusting the Al/Si molar ratio and crystalizing at 160 °C for 24 h. The Si was recovered in the form of high value-added zeolite F, with only a 3.60 % loss of Ga.
Collapse
Affiliation(s)
- Gangan Wang
- School of Materials and Metallurgy, Guizhou University, Guiyang 550025, China
| | - Chaoyi Chen
- School of Materials and Metallurgy, Guizhou University, Guiyang 550025, China.
| | - Junqi Li
- School of Materials and Metallurgy, Guizhou University, Guiyang 550025, China; Guizhou Province Dual Carbon and New Energy Technology Innovation and Development Research Institute, Guiyang 550025, China
| | - Fan Yang
- School of Materials and Metallurgy, Guizhou University, Guiyang 550025, China
| | - Linzhu Wang
- School of Materials and Metallurgy, Guizhou University, Guiyang 550025, China
| | - Xin Lin
- School of Materials and Metallurgy, Guizhou University, Guiyang 550025, China
| | - Hao Wu
- School of Materials and Metallurgy, Guizhou University, Guiyang 550025, China
| | - Jun Zhang
- School of Materials and Metallurgy, Guizhou University, Guiyang 550025, China
| |
Collapse
|
13
|
Ge X, Fan Y, Zhai H, Chi J, Putnis CV, Wang L, Zhang W. Direct observations of nanoscale brushite dissolution by the concentration-dependent adsorption of phosphate or phytate. Water Res 2024; 248:120851. [PMID: 37976955 DOI: 10.1016/j.watres.2023.120851] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/13/2023] [Revised: 11/05/2023] [Accepted: 11/08/2023] [Indexed: 11/19/2023]
Abstract
With the development of agricultural intensification, phosphorus (P) accumulation in croplands and sediments has resulted in the increasingly widespread interaction between inorganic and organic P species, which has been, previously, underestimated or even ignored. We quantified the nanoscale dissolution kinetics of sparingly soluble brushite (CaHPO4·2H2O, DCPD) over a broad range of phosphate and/or phytate concentrations by using in situ atomic force microscopy (AFM). Compared to water, we found that low concentrations of phosphate (1-1000 µM) or phytate (1-100 µM) inhibited brushite dissolution by slowing single step retraction. However, with increasing phosphate or phytate concentrations to 10 mM, there was a reverse effect of dissolution promotion at brushite-water interfaces. In situ observations of the coupled dissolution-reprecipitation showed that phosphate precipitated more readily than phytate on brushite surfaces, with the formation of amorphous calcium phosphate (ACP). For a fundamental understanding, zeta potential and in situ Raman spectroscopy (RS) revealed that the concentration-dependent dissolution is attributed to the reverse of outer-sphere to inner-sphere adsorption with increasing phosphate or phytate concentrations. In addition, the mineralization of phytate with outer-sphere adsorption by phytase was higher than that with inner-spere adsorption, and the presence of phytate delayed ACP phase transformation to hydroxylapatite (HAP). These in situ observations and analyses may fill the knowledge gaps of interaction between inorganic and organic P species in P-rich terrestrial and aquatic environments, thereby implicating their biogeochemical cycling and the associated availability.
Collapse
Affiliation(s)
- Xinfei Ge
- College of Resources and Environment, Huazhong Agricultural University, Wuhan 430070, China; Department of Environmental Science, Zhejiang University, Hangzhou 310058, China; Zhejiang Provincial Key Laboratory of Organic Pollution Process and Control, Hangzhou 310058, China
| | - Yuke Fan
- College of Resources and Environment, Huazhong Agricultural University, Wuhan 430070, China
| | - Hang Zhai
- Department of Civil and Environmental Engineering, University of Wisconsin-Madison, Madison, WI 53706, United States
| | - Jialin Chi
- College of Resources and Environment, Huazhong Agricultural University, Wuhan 430070, China
| | - Christine V Putnis
- Institut für Mineralogie, University of Münster, Münster 48149, Germany; School of Molecular and Life Sciences, Curtin University, Perth 6845, Australia
| | - Lijun Wang
- College of Resources and Environment, Huazhong Agricultural University, Wuhan 430070, China
| | - Wenjun Zhang
- College of Resources and Environment, Huazhong Agricultural University, Wuhan 430070, China.
| |
Collapse
|
14
|
Zohrabi Y, Ghazi ME, Izadifard M, Valipour A. Synthesis, structural, magnetic property, and Cd(II) adsorption behavior of Ca-substituted MgFe 2O 4 nanomaterials in aqueous solutions. Environ Sci Pollut Res Int 2024; 31:4080-4099. [PMID: 38102424 DOI: 10.1007/s11356-023-31326-6] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/26/2023] [Accepted: 11/28/2023] [Indexed: 12/17/2023]
Abstract
In the present study, magnetic nanomaterials (Mg1-xCaxFe2O4, 0.0 ≤ x ≤ 0.8) were prepared via a simple sol-gel method. The samples were characterized using XRD, TEM, SEM, EDX, FTIR, BET, and VSM. The structural and magnetic properties of prepared nanomaterials (NMs) were investigated, and the adsorption capacity of Cd2+ from aqueous solution was evaluated via flame atomic absorption spectroscopy (AAS). The impact of several factors on Cd2+ adsorption such as contact time (1-60 min), pH (3-8), dose (0.003-0.03 g), and initial concentration of Cd2+ (5-60 mg L-1) has been assessed. The adsorption capacity of Cd2+ for the prepared NMs followed the pseudo-second order. Several isotherm models were analyzed, and the Langmuir model was found to be the best fit for NMs. Among as-prepared NMs, Mg0.8Ca0.2Fe2O4 (MCF2, cubic 97%, orthorhombic 3%, qe 100 mg g-1) and Mg0.2Ca0.8Fe2O4 (MCF8, cubic 18%, orthorhombic 83%, qe 90 mg g-1) samples exhibited the highest adsorption performance at conditions, viz., contact time 20 min, pH 7, NM dosage 3 mg, and ions at a concentration 60 mg l-1. Cd removal percentages were achieved 93 and 75 for MCF2 and MCF8, respectively. Overall, the prepared MCF2 and MCF8 NMs could be used as effective adsorbents to eliminate toxic Cd2+ from polluted aqueous solution.
Collapse
Affiliation(s)
- Younes Zohrabi
- Department of Physics, Shahrood University of Technology, Shahrood, Iran
| | | | - Morteza Izadifard
- Department of Physics, Shahrood University of Technology, Shahrood, Iran
| | - Alireza Valipour
- Water and Wastewater Research Center (WWRC), Water Research Institute (WRI), Shahid Abbaspour Blvd., Tehran, 16765 313, Iran
| |
Collapse
|
15
|
Hiremath V, Heo J, Park HH, Seo JG. Crystallinity swayed phase transformation and oxygen vacancy formation in TiO 2 aerogel photocatalysts. Environ Res 2023; 239:117409. [PMID: 37838191 DOI: 10.1016/j.envres.2023.117409] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/18/2023] [Revised: 10/10/2023] [Accepted: 10/11/2023] [Indexed: 10/16/2023]
Abstract
The lack of crystallinity of the aerogel materials has limited their significance which otherwise have found huge potential in wide variety of applications. In current work, we have developed TiO2 aerogels by solid-state gelation method using commercially available P25 and ST-01 (commercial Ishihara TiO2 Powder). The lack of crystallinity in the aerogel framework was resolved via utilizing crystalline TiO2 nanoparticles and the phase transformation was assessed as a function of phase composition. Via controlled solid-state gelation, surface area retention of 88.7% was achieved whereas the rutile-to-anatase weight fraction (WR) was considerably enhanced to 0.50. Interestingly, the phase transformation occurred only in P25, which suggests the mixed phase (anatase + rutile) composition as prerequisite for successful phase transformation. Favorably, TiO2 aerogels imbibe high degree of oxygen vacancies (Vo) responsible for photocatalytic applications. Interestingly, Vo induction is higher for the TiO2 with anatase phase composition (ST-01) followed by the sample with mixed phase composition (P25). The developed TiO2 aerogel photocatalysts were employed to dye degradation of Rhodamine B (RhB) and Methylene Blue (MB). The samples attained 94.8% and 96.8% degradation efficiency within 15 min for RhB and MB with nearly 2-fold improvement in the photocatalytic efficiency compared to parent P25 TiO2 respectively.
Collapse
Affiliation(s)
- Vishwanath Hiremath
- Department of Chemical Engineering, Hanyang University, Seoul, 04763, Republic of Korea; Center for Creative Convergence Education, Hanyang University, Seoul, 04763, Republic of Korea; Clean-Energy Research Institute, Hanyang University, Seoul, 04763, Republic of Korea
| | - Jayun Heo
- Department of Chemical Engineering, Hanyang University, Seoul, 04763, Republic of Korea
| | - Hyung-Ho Park
- Department of Materials Science and Engineering, Yonsei University, Seoul, 03722, Republic of Korea
| | - Jeong Gil Seo
- Department of Chemical Engineering, Hanyang University, Seoul, 04763, Republic of Korea; Clean-Energy Research Institute, Hanyang University, Seoul, 04763, Republic of Korea.
| |
Collapse
|
16
|
Zheng J, Zheng Z, Li L, Li X, Liu W, Lin Z. Acid-leaching mechanism of electroplating sludge: based on a comprehensive analysis of heavy-metal occurrence and the dynamic evolution of coexisting mineral phases. Environ Sci Pollut Res Int 2023; 30:113600-113608. [PMID: 37851258 DOI: 10.1007/s11356-023-30403-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/23/2023] [Accepted: 10/07/2023] [Indexed: 10/19/2023]
Abstract
Electroplating sludge is a typical heavy metal-containing hazardous waste with tens of millions of tons produced annually in China. Acid leaching is the most common method to extract valuable heavy metals for resource recycling and environmental protection. However, the coexisting elements, which are released from electroplating sludge to the leaching solution, will hinder the recycling of valuable heavy metals. In this work, dynamic acid-leaching experiments, X-ray diffraction analysis, and simulation calculations were conducted. It was found that coexisting elements (mainly Ca, Fe, and Al) account for a large proportion, and calcium salts as coexisting mineral phase (especially CaCO3) are ubiquitous in electroplating sludge. Moreover, the evolution of coexisting mineral phase plays an essential role in the acid-leaching process: (1) the dissolution of CaCO3 contributed a strong acid-neutralization capability and released Ca2+; (2) H2SO4 is the optimal extracting reagent, since it triggered the transformation of calcium salts to CaSO4·2H2O, reducing the Ca2+ concentration; (3) the coexisting elements Fe and Al would form ferrous and aluminum salt minerals with the acid-leaching process, which reduces the leaching of low-value elements. This work provides a new perspective on the acid-leaching mechanism of electroplating sludge, where the evolution of the mineral phase effect the release of valuable heavy metals and coexisting elements. This work also provides as comprehensive information as possible on electroplating sludge and inspires the improvement of the acid-leaching method.
Collapse
Affiliation(s)
- Jiayi Zheng
- Guangzhou Environmental Protection Investment Group Co., Ltd., Guangzhou, 510016, People's Republic of China
- Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, School of Environment and Energy, South China University of Technology, Guangzhou, 510006, Guangdong, People's Republic of China
| | - Zhengqiang Zheng
- Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, School of Environment and Energy, South China University of Technology, Guangzhou, 510006, Guangdong, People's Republic of China
- The Key Laboratory of Pollution Control and Ecosystem Restoration in Industry Clusters (Ministry of Education), Guangzhou, 510006, Guangdong, People's Republic of China
| | - Li Li
- Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, School of Environment and Energy, South China University of Technology, Guangzhou, 510006, Guangdong, People's Republic of China
- The Key Laboratory of Pollution Control and Ecosystem Restoration in Industry Clusters (Ministry of Education), Guangzhou, 510006, Guangdong, People's Republic of China
| | - Xiaoqin Li
- Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, School of Environment and Energy, South China University of Technology, Guangzhou, 510006, Guangdong, People's Republic of China
- The Key Laboratory of Pollution Control and Ecosystem Restoration in Industry Clusters (Ministry of Education), Guangzhou, 510006, Guangdong, People's Republic of China
| | - Weizhen Liu
- Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, School of Environment and Energy, South China University of Technology, Guangzhou, 510006, Guangdong, People's Republic of China.
- The Key Laboratory of Pollution Control and Ecosystem Restoration in Industry Clusters (Ministry of Education), Guangzhou, 510006, Guangdong, People's Republic of China.
| | - Zhang Lin
- Chinese National Engineering Research Center for Control and Treatment of Heavy Metal Pollution, School of Metallurgy and Environment, Central South University, Changsha, 410083, Hunan, People's Republic of China
| |
Collapse
|
17
|
Numpilai T, Seubsai A, Chareonpanich M, Witoon T. Unraveling the roles of microporous and micro-mesoporous structures of carbon supports on iron oxide properties and As (V) removal performance in contaminated water. Environ Res 2023; 236:116742. [PMID: 37507043 DOI: 10.1016/j.envres.2023.116742] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/02/2023] [Revised: 07/12/2023] [Accepted: 07/24/2023] [Indexed: 07/30/2023]
Abstract
This study investigates the impact of microporous (SP-C) and micro-mesoporous carbon (DP-C) supports on the dispersion and phase transformation of iron oxides and their arsenic (V) removal efficiency. The research demonstrates that carbon-supported iron oxide sorbents exhibit superior As(V) uptake capacity compared to unsupported Fe2O3, attributed to reduced iron oxide crystallite sizes and As(V) adsorption on carbon supports. Maximum As(V) uptake capacities of 23.8 mg/g and 18.9 mg/g were achieved for Fe/SP-C and Fe/DP-C at 30 wt% and 50 wt% iron loading, respectively. The study reveals a nonlinear relationship between As(V) sorption capacity and iron oxide crystallite size after excluding As(V) adsorption capacity on carbon supports, suggesting the iron oxide phase (Fe3O4) plays a role in determining adsorption capacity. Iron oxide-loaded DP-C sorbents exhibit faster adsorption rates at low As(V) concentrations (5 mg/L) than SP-C sorbents due to their bimodal pore structure. Adsorption behavior varies at higher As(V) concentrations (45 mg/L), with Fe/DP-C reaching maximum capacity more slowly due to limited available adsorptive sites. All adsorbents maintained near-complete As(V) removal efficiency over five cycles. The findings provide insights for designing more efficient adsorbents for As(V) removal from contaminated water sources.
Collapse
Affiliation(s)
- Thanapha Numpilai
- Department of Environmental Science, Faculty of Science and Technology, Thammasat University, Pathum Thani, 12120, Thailand
| | - Anusorn Seubsai
- Center of Excellence on Petrochemical and Materials Technology, Department of Chemical Engineering, Faculty of Engineering, Kasetsart University, Bangkok, 10900, Thailand; Center for Advanced Studies in Nanotechnology for Chemical, Food and Agricultural Industries, KU Institute for Advanced Studies, Kasetsart University, Bangkok, 10900, Thailand
| | - Metta Chareonpanich
- Center of Excellence on Petrochemical and Materials Technology, Department of Chemical Engineering, Faculty of Engineering, Kasetsart University, Bangkok, 10900, Thailand; Center for Advanced Studies in Nanotechnology for Chemical, Food and Agricultural Industries, KU Institute for Advanced Studies, Kasetsart University, Bangkok, 10900, Thailand
| | - Thongthai Witoon
- Center of Excellence on Petrochemical and Materials Technology, Department of Chemical Engineering, Faculty of Engineering, Kasetsart University, Bangkok, 10900, Thailand; Center for Advanced Studies in Nanotechnology for Chemical, Food and Agricultural Industries, KU Institute for Advanced Studies, Kasetsart University, Bangkok, 10900, Thailand.
| |
Collapse
|
18
|
Saelee T, Apichoksiri P, Rittiruam M, Wangphon C, Khajondetchairit P, Praserthdam S, Praserthdam P. A density functional theory study on how γ-Al 2O 3 - Boehmite transformation affects carbon evolution during aqueous-phase reaction. Chemosphere 2023; 340:139842. [PMID: 37597627 DOI: 10.1016/j.chemosphere.2023.139842] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/15/2023] [Revised: 07/31/2023] [Accepted: 08/14/2023] [Indexed: 08/21/2023]
Abstract
Gamma-alumina (γ-Al2O3), one of the most common materials, is commercially used in many catalytic applications, including the active catalyst and support. However, the problem of fast deactivation makes the utilization of the γ-Al2O3 challenging. This work elucidates the mechanism of coke formation consisting of coke deposition and evolution on γ-Al2O3(110) surfaces in differential conditions, including; clean and hydroxylation γ-Al2O3(110) in terms of partial and fully hydroxylation of OH/γ-Al2O3(110) and AlOOH(010), respectively. We demonstrated that the γ-Al2O3(110) surface is proper for atomic coke deposition and dimerization in the initial state, where the presence of OH species promotes the coke evolution to higher coke, Cn (where n ≥ 3). Also, the higher coke formation thermodynamically preferred the cyclic form to the aliphatic one. The electron transfer from substrates to adsorbed coke illustrates the role of the electron donor of catalyst surfaces corresponding to the electron acceptor of adsorbed cokes.
Collapse
Affiliation(s)
- Tinnakorn Saelee
- High-Performance Computing Unit (CECC-HCU), Center of Excellence on Catalysis and Catalytic Reaction Engineering (CECC), Chulalongkorn University, Bangkok, 10330, Thailand; Center of Excellence on Catalysis and Catalytic Reaction Engineering (CECC), Chulalongkorn University, Bangkok, 10330, Thailand; Saelee Group, Chulalongkorn University, Bangkok, 10330, Thailand
| | - Phakaorn Apichoksiri
- High-Performance Computing Unit (CECC-HCU), Center of Excellence on Catalysis and Catalytic Reaction Engineering (CECC), Chulalongkorn University, Bangkok, 10330, Thailand; Center of Excellence on Catalysis and Catalytic Reaction Engineering (CECC), Chulalongkorn University, Bangkok, 10330, Thailand; Saelee Group, Chulalongkorn University, Bangkok, 10330, Thailand
| | - Meena Rittiruam
- High-Performance Computing Unit (CECC-HCU), Center of Excellence on Catalysis and Catalytic Reaction Engineering (CECC), Chulalongkorn University, Bangkok, 10330, Thailand; Center of Excellence on Catalysis and Catalytic Reaction Engineering (CECC), Chulalongkorn University, Bangkok, 10330, Thailand; Rittiruam Group, Chulalongkorn University, Bangkok, 10330, Thailand
| | - Chanthip Wangphon
- High-Performance Computing Unit (CECC-HCU), Center of Excellence on Catalysis and Catalytic Reaction Engineering (CECC), Chulalongkorn University, Bangkok, 10330, Thailand; Center of Excellence on Catalysis and Catalytic Reaction Engineering (CECC), Chulalongkorn University, Bangkok, 10330, Thailand; Saelee Group, Chulalongkorn University, Bangkok, 10330, Thailand
| | - Patcharaporn Khajondetchairit
- High-Performance Computing Unit (CECC-HCU), Center of Excellence on Catalysis and Catalytic Reaction Engineering (CECC), Chulalongkorn University, Bangkok, 10330, Thailand; Center of Excellence on Catalysis and Catalytic Reaction Engineering (CECC), Chulalongkorn University, Bangkok, 10330, Thailand; Khajondetchairit Group, Chulalongkorn University, Bangkok, 10330, Thailand
| | - Supareak Praserthdam
- High-Performance Computing Unit (CECC-HCU), Center of Excellence on Catalysis and Catalytic Reaction Engineering (CECC), Chulalongkorn University, Bangkok, 10330, Thailand; Center of Excellence on Catalysis and Catalytic Reaction Engineering (CECC), Chulalongkorn University, Bangkok, 10330, Thailand.
| | - Piyasan Praserthdam
- Center of Excellence on Catalysis and Catalytic Reaction Engineering (CECC), Chulalongkorn University, Bangkok, 10330, Thailand
| |
Collapse
|
19
|
Kasuga Y, Kimura S, Maki K, Unno H, Omori S, Hirano K, Ebihara A, Okiji T. Phase transformation and mechanical properties of heat-treated nickel-titanium rotary endodontic instruments at room and body temperatures. BMC Oral Health 2023; 23:825. [PMID: 37904159 PMCID: PMC10614384 DOI: 10.1186/s12903-023-03550-6] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/04/2023] [Accepted: 10/18/2023] [Indexed: 11/01/2023] Open
Abstract
BACKGROUND The aim of this study was to evaluate the phase composition, phase transformation temperatures, bending property, and cyclic fatigue resistance of different heat-treated nickel-titanium (NiTi) rotary instruments with the same tip diameter and taper at room (RT; 25 ± 1 °C) and body (BT; 37 ± 1 °C) temperatures. METHODS Five heat-treated NiTi rotary instruments, HyFlex EDM (EDM), HyFlex CM (CM), Vortex Blue (VB), RE file CT (RE) and JIZAI, and a non-heat-treated NiTi rotary instrument (Mtwo) with a size 40, 0.04 taper were investigated. Temperature-dependent phase transformation was examined with differential scanning calorimetry (DSC). The bending loads of the instruments at RT and BT were evaluated using a cantilever-bending test. Cyclic fatigue resistance at RT and BT was measured using a dynamic test, during which the instruments were rotated in combination with a 2-mm back-and-forth motion in an artificial curved canal, and the number of cycles to failure (NCF) was determined. The results were analyzed using two-way repeated measures analysis of variance, a simple main effect test, and the Bonferroni test (α = 0.05). RESULTS DSC results indicated that EDM and Mtwo were primarily composed of martensite/R-phase and austenite, respectively, while the other heat-treated instruments were composed of a mix of martensite/R-phase and austenite at the tested temperatures. Regardless of the temperature setting, the bending loads of heat-treated instruments were significantly lower than those of Mtwo (p < 0.05). EDM showed the lowest bending loads and highest NCF at both temperatures (p < 0.05). CM, VB, and JIZAI showed significantly higher bending loads at BT than at RT (p < 0.05). The NCF of all the heat-treated instruments, except VB, was lower at BT than at RT (p < 0.05). At BT, the NCF of CM, VB, RE, and JIZAI were not significantly higher than that of Mtwo (p > 0.05). CONCLUSIONS Heat-treated NiTi instruments exhibited lower bending loads and higher NCF values than Mtwo. However, this tendency was less pronounced at BT than at RT, especially in the NCF values of instruments with a mixture of martensite/R-phase and austenite phases at the tested temperatures.
Collapse
Affiliation(s)
- Yuka Kasuga
- Department of Pulp Biology and Endodontics, Division of Oral Health Sciences, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU), 1-5-45 Yushima, Bunkyo-ku, Tokyo, 113-8549, Japan
| | - Shunsuke Kimura
- Department of Pulp Biology and Endodontics, Division of Oral Health Sciences, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU), 1-5-45 Yushima, Bunkyo-ku, Tokyo, 113-8549, Japan.
| | - Keiichiro Maki
- Department of Pulp Biology and Endodontics, Division of Oral Health Sciences, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU), 1-5-45 Yushima, Bunkyo-ku, Tokyo, 113-8549, Japan
| | - Hayate Unno
- Department of Pulp Biology and Endodontics, Division of Oral Health Sciences, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU), 1-5-45 Yushima, Bunkyo-ku, Tokyo, 113-8549, Japan
| | - Satoshi Omori
- Department of Pulp Biology and Endodontics, Division of Oral Health Sciences, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU), 1-5-45 Yushima, Bunkyo-ku, Tokyo, 113-8549, Japan
| | - Keiko Hirano
- Department of Pulp Biology and Endodontics, Division of Oral Health Sciences, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU), 1-5-45 Yushima, Bunkyo-ku, Tokyo, 113-8549, Japan
| | - Arata Ebihara
- Department of Pulp Biology and Endodontics, Division of Oral Health Sciences, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU), 1-5-45 Yushima, Bunkyo-ku, Tokyo, 113-8549, Japan
| | - Takashi Okiji
- Department of Pulp Biology and Endodontics, Division of Oral Health Sciences, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU), 1-5-45 Yushima, Bunkyo-ku, Tokyo, 113-8549, Japan
| |
Collapse
|
20
|
Liao C, Li X, Li J, Zheng J, Weng C, Liu W, Lin Z. Chromium removal from chromium gypsum through microwave hydrothermal crystal phase regulation. Environ Sci Pollut Res Int 2023; 30:104544-104553. [PMID: 37704811 DOI: 10.1007/s11356-023-29472-y] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/25/2023] [Accepted: 08/19/2023] [Indexed: 09/15/2023]
Abstract
Chromium gypsum (CG) is a common hazardous waste formed in chromium salt or electroplating industries. The trapped or lattice-doped CrO42- in gypsum crystals are difficult to be reduced or removed by traditional methods, which will be re-oxidized or slowly released during long-term hypaethral storage. In this study, microwave hydrothermal treatment was applied to remove chromium in CG. Under optimal conditions (solid-liquid ratio of 1:5, 0.1 M sulfuric acid as liquid media, and 110 °C), over 99% of the chromium in CG can be removed within 10 min. XRD spectra indicated that 59.8% gypsum was transformed to from dihydrate gypsum to hemihydrate gypsum. The toxicity leaching test shows that chromium in CG is 377.0 mg/L before detoxification and 0.55 mg/L after detoxification, which proves that chromium in CG lattice can be efficiently removed. This work enables to significantly advance the dehydration phase transformation process of gypsum and release the heavy metal impurities within it more quickly and provides new possibilities to treat similar solid waste containing gypsum or minerals with hydration water.
Collapse
Affiliation(s)
- Chengzhe Liao
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, Guangdong, 510006, People's Republic of China
- The Key Laboratory of Pollution Control and Ecosystem Restoration in Industry Clusters (Ministry of Education), South China University of Technology, Guangzhou, 510006, People's Republic of China
| | - Xiaoqin Li
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, Guangdong, 510006, People's Republic of China.
- The Key Laboratory of Pollution Control and Ecosystem Restoration in Industry Clusters (Ministry of Education), South China University of Technology, Guangzhou, 510006, People's Republic of China.
| | - Jun Li
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, Guangdong, 510006, People's Republic of China
- The Key Laboratory of Pollution Control and Ecosystem Restoration in Industry Clusters (Ministry of Education), South China University of Technology, Guangzhou, 510006, People's Republic of China
| | - Jiayi Zheng
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, Guangdong, 510006, People's Republic of China
- The Key Laboratory of Pollution Control and Ecosystem Restoration in Industry Clusters (Ministry of Education), South China University of Technology, Guangzhou, 510006, People's Republic of China
- Guangzhou Environmental Protection Investment Group Co., Ltd., Guangzhou, 510016, People's Republic of China
| | - Changzhou Weng
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, Guangdong, 510006, People's Republic of China
- The Key Laboratory of Pollution Control and Ecosystem Restoration in Industry Clusters (Ministry of Education), South China University of Technology, Guangzhou, 510006, People's Republic of China
| | - Weizhen Liu
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, Guangdong, 510006, People's Republic of China
- The Key Laboratory of Pollution Control and Ecosystem Restoration in Industry Clusters (Ministry of Education), South China University of Technology, Guangzhou, 510006, People's Republic of China
| | - Zhang Lin
- Chinese National Engineering Research Center for Control & Treatment of Heavy Metal Pollution, School of Metallurgy and Environment, Central South University, Changsha, Hunan, 410083, People's Republic of China
| |
Collapse
|
21
|
Ngo TTB, Nguyen VT, Fang TH. Nanoscale friction behavior and deformation during copper chemical mechanical polishing process. J Mol Model 2023; 29:293. [PMID: 37620735 DOI: 10.1007/s00894-023-05699-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/16/2023] [Accepted: 08/17/2023] [Indexed: 08/26/2023]
Abstract
CONTEXT The mechanical characteristics and deformation behavior of Cu material under the nanoscratching through a diamond tooltip on the workpiece are studied using molecular dynamics (MD) simulation. Effects of scratching velocity, scratching depth, workpiece temperature, and grain size on the total force, shear strain, pile-up, shear stress, workpiece temperature, and phase transformation are investigated. The results reveal that increasing the scratching velocity leads to higher oscillation in total force, greater shear strain and shear stress, higher pile-up on the workpiece surface, and higher workpiece temperatures. The effect of the scratching velocity on phase transformation shows that most of the dislocation is a transformation structure from the FCC structure to the HCP, BCC, and other structures in all workpieces during the nanoscratching process. In addition, with increasing the scratching depth, material pile-up becomes more prominent, consequently elevating the contact area between the diamond tooltip and the workpiece, which simultaneously leads to an increase in total force, shear strain, pile-up, shear stress, and workpiece temperature. The MD simulation results revealed that the subsurface region of nanoscratched Cu single-crystal experiences the formation of stacking faults, vacancy defects, and cluster vacancies. In studying the effect of workpiece temperature, the results show that higher temperatures lead to the decline of scratching force, high plastic deformation, increased shear strain and stress, lower pile-up height, and high transition from the FCC structure to both other and BCC structures. For polycrystalline structures, the force curves occur in the oscillation state in all cases of different grain sizes because of the dislocation deformation during the cutting process. The maximum force decreases with diminishing grain size, attributed to the inverse Hall-Petch relation. As the grain size increases, leading to a decrease in the shear strain, stress, and an uneven pile up; also, the HCP structure rises with decreasing grain boundary and the partial dislocation and stacking fault mobilize inside grains. METHODS By using molecular dynamics (MD) simulation based on the Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS) software, all molecular interactions were described by the Lennard-Jones (LJ) and embedded atom method (EAM) potentials. In order to mitigate the effects of temperature fluctuations, the system employs an isothermal and isobaric (NPT) ensemble for precise temperature control. The temperature was set as 300 K and the time step was 1 fs (femtosecond).
Collapse
Affiliation(s)
- Thi-Thuy Binh Ngo
- Department of Mechanical Engineering, National Kaohsiung University of Science and Technology, Kaohsiung, 807, Taiwan
| | - Van-Thuc Nguyen
- Faculty of Mechanical Engineering, Ho Chi Minh City University of Technology and Education, Ho Chi Minh City, Vietnam
| | - Te-Hua Fang
- Department of Mechanical Engineering, National Kaohsiung University of Science and Technology, Kaohsiung, 807, Taiwan.
| |
Collapse
|
22
|
Akamo DO, Kumar N, Li Y, Pekol C, Li K, Goswami M, Hirschey J, LaClair TJ, Keffer DJ, Rios O, Gluesenkamp KR. Stabilization of low-cost phase change materials for thermal energy storage applications. iScience 2023; 26:107175. [PMID: 37426345 PMCID: PMC10329044 DOI: 10.1016/j.isci.2023.107175] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/13/2023] [Revised: 06/05/2023] [Accepted: 06/14/2023] [Indexed: 07/11/2023] Open
Abstract
Sodium sulfate decahydrate (Na2SO4.10H2O, SSD), a low-cost phase change material (PCM), can store thermal energy. However, phase separation and unstable energy storage capacity (ESC) limit its use. To address these concerns, eight polymer additives-sodium polyacrylate (SPA), carboxymethyl cellulose (CMC), Fumed silica (SiO2), potassium polyacrylate (PPA), cellulose nanofiber (CNF), hydroxyethyl cellulose (HEC), dextran sulfate sodium (DSS), and poly(sodium 4-styrenesulfonate) (PSS)-were used to explore several stabilization mechanisms. The ESC of PCMs deteriorated when thickeners, SPA, PPA, and CNF, were added. DSS-modified PCMs exhibited greater stability up to 150 cycles. Rheology measurements indicated that DSS did not impact SSD viscosity significantly during stabilization. Dynamic light scattering showed that DSS reduces SSD particle size and electrostatically suspends salt particles in a stable homogeneous solution, avoiding phase separation. This study proposes a promising method to improve the thermal stability of salt hydrate PCMs by utilizing polyelectrolyte-salt hydrate mixture for thermal energy storage applications.
Collapse
Affiliation(s)
- Damilola O. Akamo
- The Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville, TN 37996, USA
- Buildings and Transportation Sciences Division, Oak Ridge National Laboratory, Oak Ridge, TN 37830, USA
| | - Navin Kumar
- Building Energy Efficiency Group, Gas Technology Institute, Des Plaines, IL 60018, USA
| | - Yuzhan Li
- School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100081, China
| | - Collin Pekol
- Materials Science and Engineering Department, University of Tennessee, Knoxville, TN 37996, USA
| | - Kai Li
- Buildings and Transportation Sciences Division, Oak Ridge National Laboratory, Oak Ridge, TN 37830, USA
| | - Monojoy Goswami
- Chemical Sciences Division, Oak Ridge National Laboratory, Oak Ridge, TN 37830, USA
| | - Jason Hirschey
- George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA, USA
| | - Tim J. LaClair
- Building Energy Science Group, National Renewable Energy Laboratory, Golden, CO 80401, USA
| | - David J. Keffer
- Materials Science and Engineering Department, University of Tennessee, Knoxville, TN 37996, USA
| | - Orlando Rios
- The Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville, TN 37996, USA
- Materials Science and Engineering Department, University of Tennessee, Knoxville, TN 37996, USA
| | - Kyle R. Gluesenkamp
- Buildings and Transportation Sciences Division, Oak Ridge National Laboratory, Oak Ridge, TN 37830, USA
| |
Collapse
|
23
|
Wen L, Lin L, Fan YA, Luo Y, Ma SS, Zhou Y, Yang C, Shih K, Li XY. Valorization of thermally hydrolyzed sludge with clay for sintering of ceramic tiles. Sci Total Environ 2023; 877:162871. [PMID: 36933740 DOI: 10.1016/j.scitotenv.2023.162871] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/07/2023] [Revised: 03/07/2023] [Accepted: 03/10/2023] [Indexed: 05/06/2023]
Abstract
The disposal of wastewater sludge is one of the most challenging environmental problems for large cities. Wastewater sludge may be utilized as a feasible substitute for clay to sinter ceramics, given their similar mineralogical composition. However, the organics in sludge will be wasted, while their release during sintering will leave cracks in the ceramic products. In this research, after the thermal treatment for effective organic recovery, the thermally hydrolyzed sludge (THS) is incorporated with clay for the sintering of construction ceramics. The experimental results showed that a THS dosing ratio up to 40 % can be achieved for mixing with montmorillonite clay to make ceramic tiles. The sintered tiles (THS-40) had an intact shape and structure, and the tile performance was close to that made from single montmorillonite (THS-0), with water absorption of 0.4 % vs. 0.2 %, compressive strength of 136.8 vs. 140.7 MPa, and undetected heavy metal leaching. Further addition of THS would lead to a considerable deterioration of the quality of the tiles to a compressive strength of as low as 5.0 MPa for the THS only product (THS-100). Comparing with the tiles incorporated with raw sludge (RS-40), the THS-40 tiles had a more intact and denser structure with a 10 % improved compressive strength. Cristobalite, aluminum phosphate, mullite, and hematite dominated in the THS-born ceramics, which are typical components of ceramics, and the amount of hematite increased with the THS dosing ratio. Sintering at a high temperature of 1200 °C enabled efficient phase transformation from quartz to cristobalite and from muscovite to mullite, which ensured the toughness and compactness of the THS-born ceramic tiles.
Collapse
Affiliation(s)
- Lei Wen
- Department of Civil Engineering, The University of Hong Kong, Pokfulam, Hong Kong
| | - Lin Lin
- Institute of Environment and Ecology, Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, China.
| | - Yi-Ang Fan
- Department of Civil Engineering, The University of Hong Kong, Pokfulam, Hong Kong
| | - Yang Luo
- Department of Materials, ETH Zürich, Vladimir-Prelog-Weg 5, Zurich 8093, Switzerland
| | - Sheng-Shou Ma
- Department of Civil Engineering, The University of Hong Kong, Pokfulam, Hong Kong
| | - Ying Zhou
- Department of Civil Engineering, The University of Hong Kong, Pokfulam, Hong Kong
| | - Chao Yang
- Department of Civil Engineering, The University of Hong Kong, Pokfulam, Hong Kong
| | - Kaimin Shih
- Department of Civil Engineering, The University of Hong Kong, Pokfulam, Hong Kong
| | - Xiao-Yan Li
- Department of Civil Engineering, The University of Hong Kong, Pokfulam, Hong Kong; Institute of Environment and Ecology, Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, China.
| |
Collapse
|
24
|
Jiang Z, Nie K, Arinzechi C, Li J, Liao Q, Si M, Yang Z, Li Q, Yang W. Cooperative effect of slow-release ferrous and phosphate for simultaneous stabilization of As, Cd and Pb in soil. J Hazard Mater 2023; 452:131232. [PMID: 36940528 DOI: 10.1016/j.jhazmat.2023.131232] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/27/2022] [Revised: 02/15/2023] [Accepted: 03/15/2023] [Indexed: 06/18/2023]
Abstract
The different chemical behavior of anionic As and cationic Cd and Pb makes the simultaneous stabilization of soils contaminated with arsenic (As), cadmium (Cd), and lead (Pb) challenging. The use of soluble, insoluble phosphate materials and iron compounds cannot simultaneously stabilize As, Cd, and Pb in soil effectively due to the easy re-activation of heavy metals and poor migration. Herein, we propose a new strategy of "cooperatively stabilizing Cd, Pb, and As with slow-release ferrous and phosphate". To very this theory, we developed ferrous and phosphate slow-release materials to simultaneously stabilize As, Cd, and Pb in soil. The stabilization efficiency of water-soluble As, Cd and Pb reached 99% within 7d, and the stabilization efficiencies of NaHCO3-extractable As, DTPA-extractable Cd and Pb reached 92.60%, 57.79% and 62.81%, respectively. The chemical speciation analysis revealed that soil As, Cd and Pb were transformed into more stable states with the reaction time. The proportion of residual fraction of As, Cd, and Pb increased from 58.01% to 93.82%, 25.69 to 47.86%, 5.58 to 48.54% after 56 d, respectively. Using ferrihydrite as a representative soil component, the beneficial interactions of phosphate and slow-release ferrous material in stabilizing Pb, Cd, and As were demonstrated. The slow-release ferrous and phosphate material reacted with As and Cd/Pb to form stable ferrous arsenic and Cd/Pb phosphate. Furthermore, the slow-release phosphate converted the adsorbed As into dissolved As, then the dissolved As reacted with released ferrous to form a more stable form. Concurrently, As, Cd and Pb were structurally incorporated into the crystalline iron oxides during the ferrous ions-catalyzed transformation of amorphous iron (hydrogen) oxides. The results demonstrates that the use of slow-release ferrous and phosphate materials can aid in the simultaneous stabilization of As, Cd, and Pb in soil.
Collapse
Affiliation(s)
- Zhi Jiang
- School of Metallurgy and Environment, Central South University, Changsha 410083, PR China
| | - Kai Nie
- School of Metallurgy and Environment, Central South University, Changsha 410083, PR China
| | - Chukwuma Arinzechi
- School of Metallurgy and Environment, Central South University, Changsha 410083, PR China
| | - Jiaxin Li
- School of Metallurgy and Environment, Central South University, Changsha 410083, PR China
| | - Qi Liao
- School of Metallurgy and Environment, Central South University, Changsha 410083, PR China; Chinese National Engineering Research Centre for Control & Treatment of Heavy Metal Pollution, Changsha 410083, PR China
| | - Mengying Si
- School of Metallurgy and Environment, Central South University, Changsha 410083, PR China; Chinese National Engineering Research Centre for Control & Treatment of Heavy Metal Pollution, Changsha 410083, PR China
| | - Zhihui Yang
- School of Metallurgy and Environment, Central South University, Changsha 410083, PR China; Chinese National Engineering Research Centre for Control & Treatment of Heavy Metal Pollution, Changsha 410083, PR China
| | - Qingzhu Li
- School of Metallurgy and Environment, Central South University, Changsha 410083, PR China; Chinese National Engineering Research Centre for Control & Treatment of Heavy Metal Pollution, Changsha 410083, PR China
| | - Weichun Yang
- School of Metallurgy and Environment, Central South University, Changsha 410083, PR China; Chinese National Engineering Research Centre for Control & Treatment of Heavy Metal Pollution, Changsha 410083, PR China.
| |
Collapse
|
25
|
Gong J, Bai P, Zhang Y, Wang Q, Sun J, Liu Y, Jiang H, Feng Z, Hu T, Meng C. Vanadate ion promoting the transformation of α-phase molybdenum trioxide (α-MoO 3) to h-phase MoO 3 (h-MoO 3) for boosted Zn-ion storage. J Colloid Interface Sci 2023; 647:115-123. [PMID: 37245270 DOI: 10.1016/j.jcis.2023.05.146] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/01/2023] [Revised: 05/17/2023] [Accepted: 05/22/2023] [Indexed: 05/30/2023]
Abstract
Molybdenum trioxide (MoO3) has been widely studied in the energy storage field due to its various phase states and unique structural advantages. Among them, lamellar α-phase MoO3 (α-MoO3) and tunnel-like h-phase MoO3 (h-MoO3) have attracted much attention. In this study, we demonstrate that vanadate ion (VO3-) can transform α-MoO3 (a thermodynamically stable phase) to h-MoO3 (a metastable phase) by altering the connection of [MoO6] octahedra configurations. h-MoO3 with VO3- inserted (referred to as h-MoO3-V) as the cathode material for aqueous zinc ion batteries (AZIBs) exhibits excellent Zn2+ storage performances. The improvement in electrochemical properties is attributed to the open tunneling structure of the h-MoO3-V, which offers more active sites for Zn2+ (de)intercalation and diffusion. As expected, the Zn//h-MoO3-V battery delivers specific capacity of 250 mAh·g-1 at 0.1 A·g-1 and rate capability (73% retention from 0.1 to 1 A·g-1, 80 cycles), well exceeding those of Zn//h-MoO3 and Zn//α-MoO3 batteries. This study demonstrates that the tunneling structure of h-MoO3 can be modulated by VO3- to enhance the electrochemical properties for AZIBs. Furthermore, it provides valuable insights for the synthesis, development and future applications of h-MoO3.
Collapse
Affiliation(s)
- Jia'ni Gong
- State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, China
| | - Pengfei Bai
- School of Chemistry and Materials Sciences, CAS Key Laboratory of Materials for Energy Conversion, and CAS Center for Excellence in Nanoscience, University of Science and Technology of China, Hefei, Anhui 230026, China
| | - Yifu Zhang
- State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, China.
| | - Qiushi Wang
- School of Physics and Materials Engineering, Dalian Minzu University, Dalian 116600, China
| | - Jingjing Sun
- State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, China
| | - Yanyan Liu
- State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, China
| | - Hanmei Jiang
- State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, China
| | - Ziyi Feng
- State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, China
| | - Tao Hu
- State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, China.
| | - Changgong Meng
- State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, China; College of Environmental and Chemical Engineering, Dalian University, Dalian 116622, China.
| |
Collapse
|
26
|
Wang B, Wu J, Sun X, Jiang J, Yang Q, Li Q, Ye Z, Guo J, Wang X. Modulating red mud for the fabrication of cementitious material by analyzing the thermal evolution of hydrogarnets. Environ Sci Pollut Res Int 2023; 30:62993-63004. [PMID: 36952160 DOI: 10.1007/s11356-023-26534-z] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/26/2022] [Accepted: 03/14/2023] [Indexed: 04/15/2023]
Abstract
This work aims to develop a modulation strategy for converting red mud (RM) into cementitious material based on elucidating the phase transformation of hydrogarnet. The results show that cementitious minerals 2CaO·SiO2 (C2S), 12CaO·7Al2O3 (C12A7), and 4CaO·Al2O3·Fe2O3 (C4AF), as well as the free iron minerals Fe and FeO, are formed by integrating calcification dealkalization and reduction roasting treatment of RM. During the reduction roasting process, CaO is preferentially combined with SiO2 and Al2O3 to form cementitious minerals, and the Fe(III) compounds in hydrogarnet and hematite can be directly reduced to free iron minerals without intermediate ferrites. By optimizing the reduction roasting parameters and eliminating the useless minerals 2CaO·Al2O3·SiO2 (C2AS), and FeO, the reduction roasting product is mainly composed of C2S, C12A7, C4AF, and Fe. Therefore, cementitious material is obtained after the magnetic separation of Fe, which possesses both early and late hydration properties. In addition, 75% Fe in RM can be recovered, and the reduced iron powder (RIP) is also useful in the cement clinker production or steel smelting process. The findings in this work lay the foundations for understanding the phase transformation of RM-derived hydrogarnet in the reduction roasting process and also provide a new reference for the modulation and utilization of RM in the cement and concrete field.
Collapse
Affiliation(s)
- Beibei Wang
- School of Materials Science & Engineering, University of Jinan, Jinan, 250022, Shandong, China
| | - Jiaming Wu
- School of Materials Science & Engineering, University of Jinan, Jinan, 250022, Shandong, China.
- University of Jinan, No 336, West road of Nan Xinzhuang Street, Jinan, 250022, China.
| | - Xiaojie Sun
- School of Materials Science & Engineering, University of Jinan, Jinan, 250022, Shandong, China
| | - Jun Jiang
- School of Materials Science & Engineering, University of Jinan, Jinan, 250022, Shandong, China
| | - Qingchun Yang
- School of Materials Science & Engineering, University of Jinan, Jinan, 250022, Shandong, China
| | - Quanliang Li
- School of Materials Science & Engineering, University of Jinan, Jinan, 250022, Shandong, China
| | - Zhengmao Ye
- School of Materials Science & Engineering, University of Jinan, Jinan, 250022, Shandong, China
| | - Jiayu Guo
- School of Materials Science & Engineering, University of Jinan, Jinan, 250022, Shandong, China
| | - Xiaohao Wang
- School of Materials Science & Engineering, University of Jinan, Jinan, 250022, Shandong, China
| |
Collapse
|
27
|
Su Z, Hou W, Wang J, Zhang Y, Jiang T. One-step separation of tin from e-waste by a chemical vapor transport process (CVT): Preparation of nano-SnO 2. Waste Manag 2023; 157:330-338. [PMID: 36603447 DOI: 10.1016/j.wasman.2022.12.037] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/01/2022] [Revised: 12/19/2022] [Accepted: 12/29/2022] [Indexed: 06/17/2023]
Abstract
E-waste is a valuable resource for the recovery of secondary metals. However, traditional methods only focused on the extraction of Cu and noble metals (Au, Ag, etc.), and significant tin (Sn) loss occurred during the smelting or the leached. In this paper, a novel chemical vapor transport (CVT) process was proposed to separate and recycle Sn from e-waste to prepare nano-SnO2. The effect of roasting parameters on Sn volatilization and characterization of nano-SnO2 were investigated using thermodynamic analysis, XRD, SEM, TEM, etc. The results indicated that Sn volatilization of 92.8 % was obtained under optimal roasting parameters under CO-CO2-N2 atmosphere. In addition, nano-SnO2 with a crystallinity of 99.9 %, an average grain size of 24.8 nm and a specific surface area of 97.9 m2/g was synthesized successfully.
Collapse
Affiliation(s)
- Zijian Su
- School of Minerals Processing and Bioengineering, Central South University, Changsha, China
| | - Wei Hou
- School of Minerals Processing and Bioengineering, Central South University, Changsha, China
| | - Jia Wang
- School of Minerals Processing and Bioengineering, Central South University, Changsha, China
| | - Yuanbo Zhang
- School of Minerals Processing and Bioengineering, Central South University, Changsha, China.
| | - Tao Jiang
- School of Minerals Processing and Bioengineering, Central South University, Changsha, China
| |
Collapse
|
28
|
Qiu G, Ning X, Shen J, Wang Y, Zhang D, Deng J. Recovery of iron from iron tailings by suspension magnetization roasting with biomass-derived pyrolytic gas. Waste Manag 2023; 156:255-263. [PMID: 36508909 DOI: 10.1016/j.wasman.2022.11.034] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/25/2022] [Revised: 11/11/2022] [Accepted: 11/25/2022] [Indexed: 06/17/2023]
Abstract
A major industrial solid waste, iron tailings occupy a large area and pose long-term pollution risks. The pyrolysis gas of biomass was used as reducing agent to suspension magnetize and roast iron tailings to recover iron in this study. The process conditions, phase transformation and microstructure evolution of the iron tailings, pyrolysis gas production, and reaction regulations were investigated to explain the mechanism of iron recovery by suspension magnetization roasting (SMR) under the action of biomass pyrolysis gas. These studies were conducted using X-ray diffraction, scanning electron microscopy, vibrating sample magnetometer, thermo-gravimetric and differential scanning calorimetry, brunauer-emmett-teller specific surface area, and gas chromatography. The results showed that, after the grinding-magnetic separation process, the iron recovery rate was 93.32 %; the iron grade of the iron concentrate was 61.50 %. The optimal process conditions were determined as follows: fast pyrolysis temperature of 600 °C, SMR temperature of 700 °C, biomass dosage of 10 %, and SMR time of 4-5 min. The formation of Fe3O4 from the surface to the interior of the particles during the reduction process, and formation of pores and cracks led to an increase in the specific surface area. The SMR temperature not only improved the heat and mass transfer effect in the reduction process but also generated more CO and H2 through the reverse reaction of methanation, which work together to increase the saturation magnetisation of the unit sample. This method can be used to efficiently recover high quality iron from refractory iron ores.
Collapse
Affiliation(s)
- Guoqiang Qiu
- Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, School of Environmental Science and Engineering, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, PR China
| | - Xunan Ning
- Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, School of Environmental Science and Engineering, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, PR China.
| | - Junhua Shen
- Shaoguan Pengrui Environmental Protection Technology Co., Ltd., Shaoguan 512625, PR China
| | - Yi Wang
- Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, School of Environmental Science and Engineering, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, PR China
| | - Dingyuan Zhang
- Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, School of Environmental Science and Engineering, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, PR China
| | - Jinhuan Deng
- Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, School of Environmental Science and Engineering, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, PR China
| |
Collapse
|
29
|
Li D, Zhang S, Jia H, Song M, Zhang Y, Li H, Zhou M. High pressure Raman study of LiClO 4. Spectrochim Acta A Mol Biomol Spectrosc 2023; 285:121914. [PMID: 36183538 DOI: 10.1016/j.saa.2022.121914] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/26/2022] [Revised: 09/17/2022] [Accepted: 09/18/2022] [Indexed: 06/16/2023]
Abstract
Lithium perchlorate (LiClO4), as one of the new high-energy oxidizers, is chosen for high pressure Raman research to gain a better understanding of the structure and stability, which is very important for the performance of an explosive. Raman spectra of LiClO4 crystal have been measured from ambient to 25.07 GPa with diamond anvil cells (DACs) at room temperature to investigate the structural stability of this system. Raman vibrational modes of LiClO4 crystal at ambient pressure were resolved comprehensively on the basis of our experimental and calculated results. Upon increase of pressure on LiClO4 crystal sample to 1.96 GPa, it was found that the LiClO4 crystal exhibited a pressure-induced first-order phase transformation behavior. The occurrence of a second phase transformation of LiClO4 crystal induced by pressure was observed at about 5.09 GPa. Both phase transformations were demonstrated based on the detailed spectroscopic analysis of the variations in the number of lattice modes, splitting of Raman bands and frequency jumps of the Raman vibrational modes of LiClO4 crystal.
Collapse
Affiliation(s)
- DongFei Li
- Key Laboratory of Functional Materials Physics and Chemistry of the Ministry of Education, Jilin Normal University, Changchun 130103, Jilin Province, PR China; State Key Laboratory of Superhard Materials, Jilin University, Changchun 130012, Jilin Province, PR China
| | - Shuo Zhang
- Key Laboratory of Functional Materials Physics and Chemistry of the Ministry of Education, Jilin Normal University, Changchun 130103, Jilin Province, PR China
| | - Hongsheng Jia
- Key Laboratory of Functional Materials Physics and Chemistry of the Ministry of Education, Jilin Normal University, Changchun 130103, Jilin Province, PR China; School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, PR China
| | - Mingxing Song
- College of Information and Technology, Jilin Normal University, Siping 136000, Jilin Province, PR China.
| | - Ying Zhang
- College of Physics, Changchun University of Science and Technology, Changchun 130013, China
| | - Haibo Li
- Key Laboratory of Functional Materials Physics and Chemistry of the Ministry of Education, Jilin Normal University, Changchun 130103, Jilin Province, PR China
| | - Mi Zhou
- State Key Laboratory of Superhard Materials, Jilin University, Changchun 130012, Jilin Province, PR China.
| |
Collapse
|
30
|
Yoo SK, Jo YH, Yeo ISL, Yoon HI, Lee JH, Ahn JS, Han JS. Analysis of surface characteristics of (Y, Nb)-TZP after finishing and polishing. J Adv Prosthodont 2022; 14:335-345. [PMID: 36685792 PMCID: PMC9832147 DOI: 10.4047/jap.2022.14.6.335] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/09/2022] [Revised: 10/25/2022] [Accepted: 10/27/2022] [Indexed: 12/28/2022] Open
Abstract
PURPOSE This in vitro study aimed to evaluate the surface characteristics of a full veneer crown fabricated chairside (CS) from a (Y, Nb)-TZP zirconia block in response to conventional zirconia grinding and polishing. MATERIALS AND METHODS Zirconia crowns (n = 40) were first prepared and divided into two groups of materials: Labside (LS) and CS, after which each specimen went through a five-step grinding and polishing procedure. Following each surface treatment, surface characteristics were analyzed using confocal laser microscopy (CLSM), average surface roughness (Ra) values were processed from the profile data through Gaussian filtering, and X-ray diffraction pattern analysis was performed to evaluate the monoclinic (M) phase content. Then, a representative specimen was selected for field-emission scanning electron microscopy (FE-SEM), followed by a final analysis of the roughness and X-ray diffraction of the specimens using the independent t-test and repeated measures analysis of variance (RM-ANOVA). RESULTS In every group, polishing significantly reduced the Ra values (P < .001). There was no significant difference in Ra between the polished state CS and LS. Furthermore, CLSM and FE-SEM investigations revealed that even though grain exposure was visible in CS specimens throughout the as-delivered and ground states, the exposure was reduced after polishing. Moreover, while no phase transformation was visible in the LS, phase transformation was visible in CS after every surface treatment, with the M phase content of the CS group showing a significant reduction after polishing (P < .001). CONCLUSION Within the limits of this study, clinically acceptable level of surface finishing of (Y, Nb)-TZP can be achieved after conventional zirconia polishing sequence.
Collapse
Affiliation(s)
- Seong-keun Yoo
- Department of Prosthodontics, School of Dentistry and Dental Research Institute, Seoul National University, Seoul, Republic of Korea
| | - Ye-Hyeon Jo
- Dental Research Institute, Seoul National University School of Dentistry, Seoul, Republic of Korea
| | - In-Sung Luke Yeo
- Department of Prosthodontics, School of Dentistry and Dental Research Institute, Seoul National University, Seoul, Republic of Korea
| | - Hyung-In Yoon
- Department of Prosthodontics, School of Dentistry and Dental Research Institute, Seoul National University, Seoul, Republic of Korea
| | - Jae-Hyun Lee
- Department of Prosthodontics, School of Dentistry and Dental Research Institute, Seoul National University, Seoul, Republic of Korea
| | - Jin-Soo Ahn
- Department of Dental Biomaterials Science and Dental Research Institute, School of Dentistry, Seoul National University, Seoul, Republic of Korea
| | - Jung-Suk Han
- Department of Prosthodontics, School of Dentistry and Dental Research Institute, Seoul National University, Seoul, Republic of Korea
| |
Collapse
|
31
|
Long Y, Qiu J, Shen D, Gu F. Transformation and leaching behavior of Pb in hazardous waste incineration fly ash after thermal treatment with addition of Fe 2O 3. Waste Manag 2022; 153:304-311. [PMID: 36179549 DOI: 10.1016/j.wasman.2022.09.014] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/21/2022] [Revised: 09/09/2022] [Accepted: 09/14/2022] [Indexed: 06/16/2023]
Abstract
This study investigated the leaching behavior of Pb in hazardous waste incineration fly ash (HWIFA) after adding Fe2O3 thermal treatment and revealed the leaching mechanism of Pb from the perspective of phase transformation. The static leaching results showed that at 600 °C-1300 °C, with the addition of Fe2O3 increased, the Pb leaching toxicity continued to decrease. The dynamic results indicated that as the thermal treatment temperature was higher than 1100 °C, the addition of Fe2O3 can effectively inhibit the dynamic leaching of Pb in HWIFA. Meanwhile, the inhibition effect was not very closely related to the amount of Fe2O3. The addition of Fe2O3 can react with PbO to form PbFe12O19, which has a better stability. The appearance of PbFe12O19 was the main reason for adding Fe2O3 to enhanced the immobilization of Pb. However, the amount of Fe2O3 should be carefully controlled to avoid an excessive reducible fraction of Pb in the thermal treated HWIFA, which will affect the long-term stability of Pb.
Collapse
Affiliation(s)
- Yuyang Long
- Zhejiang Provincial Key Laboratory of Solid Waste Treatment and Recycling, School of Environmental Science and Engineering, Instrumental Analysis Center of Zhejiang Gongshang University, Zhejiang Gongshang University, Hangzhou, Zhejiang 310018, China
| | - Junjian Qiu
- Zhejiang Provincial Key Laboratory of Solid Waste Treatment and Recycling, School of Environmental Science and Engineering, Instrumental Analysis Center of Zhejiang Gongshang University, Zhejiang Gongshang University, Hangzhou, Zhejiang 310018, China
| | - Dongsheng Shen
- Zhejiang Provincial Key Laboratory of Solid Waste Treatment and Recycling, School of Environmental Science and Engineering, Instrumental Analysis Center of Zhejiang Gongshang University, Zhejiang Gongshang University, Hangzhou, Zhejiang 310018, China
| | - Foquan Gu
- Zhejiang Provincial Key Laboratory of Solid Waste Treatment and Recycling, School of Environmental Science and Engineering, Instrumental Analysis Center of Zhejiang Gongshang University, Zhejiang Gongshang University, Hangzhou, Zhejiang 310018, China.
| |
Collapse
|
32
|
Xu X, Mu W, Xiao T, Li L, Xin H, Lei X, Luo S. A clean and efficient process for simultaneous extraction of Li, Co, Ni and Mn from spent Lithium-ion batteries by low-temperature NH 4Cl roasting and water leaching. Waste Manag 2022; 153:61-71. [PMID: 36055176 DOI: 10.1016/j.wasman.2022.08.022] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/05/2022] [Revised: 08/16/2022] [Accepted: 08/23/2022] [Indexed: 06/15/2023]
Abstract
The recycling of valuable metals from spent lithium-ion batteries (LIBs) has great significance for environmental protection and resource conservation. In this paper, a low-temperature clean chlorination roasting-water leaching process was proposed to simultaneously extract Li, Ni, Co and Mn from cathode material (NCM) of spent LIBs. The temperature range of chlorination roasting was determined by thermodynamic analysis to be 250-600 °C. The effect of some factors on the conversion of valuable metals in the process of chlorination roasting and water leaching was systematically studied. The results showed that more than 98 % of Li, Co, Ni and Mn could be extracted under optimized chlorination roasting and water leaching conditions. The chlorination roasting mechanism and phase transformation evolution was determined by means of thermodynamic analysis, TG-DTA, XRD, SEM and EDS. The extraction of valuable metals was realized by the reaction of the metal oxides produced by the decomposition of NCM with NH4Cl or its evolved HCl to form water-soluble metal chlorides or chlorinated metal-ammonium complexes. The chlorination technique using NH4Cl provided an effective and clean approach for the simultaneous extraction of Li, Co, Ni and Mn from spent LIBs.
Collapse
Affiliation(s)
- Xueqing Xu
- School of Materials Science and Engineering, Northeastern University, Shenyang 110819, Liaoning, China; School of Resources and Materials, Northeastern University at Qinhuangdao, Qinhuangdao 066004, Hebei, China; Key Laboratory of Resources Cleaner Conversion and Efficient Utilization Qinhuangdao City, Qinhuangdao 066004, Hebei, China
| | - Wenning Mu
- School of Materials Science and Engineering, Northeastern University, Shenyang 110819, Liaoning, China; School of Resources and Materials, Northeastern University at Qinhuangdao, Qinhuangdao 066004, Hebei, China; Key Laboratory of Dielectric and Electrolyte Functional Material Hebei Province, Qinhuangdao 066004, Hebei, China; Key Laboratory of Resources Cleaner Conversion and Efficient Utilization Qinhuangdao City, Qinhuangdao 066004, Hebei, China.
| | - Tengfei Xiao
- School of Materials Science and Engineering, Northeastern University, Shenyang 110819, Liaoning, China; School of Resources and Materials, Northeastern University at Qinhuangdao, Qinhuangdao 066004, Hebei, China; Key Laboratory of Resources Cleaner Conversion and Efficient Utilization Qinhuangdao City, Qinhuangdao 066004, Hebei, China
| | - Liying Li
- School of Materials Science and Engineering, Northeastern University, Shenyang 110819, Liaoning, China; School of Resources and Materials, Northeastern University at Qinhuangdao, Qinhuangdao 066004, Hebei, China; Key Laboratory of Resources Cleaner Conversion and Efficient Utilization Qinhuangdao City, Qinhuangdao 066004, Hebei, China
| | - Haixia Xin
- School of Resources and Materials, Northeastern University at Qinhuangdao, Qinhuangdao 066004, Hebei, China; Key Laboratory of Resources Cleaner Conversion and Efficient Utilization Qinhuangdao City, Qinhuangdao 066004, Hebei, China
| | - Xuefei Lei
- School of Materials Science and Engineering, Northeastern University, Shenyang 110819, Liaoning, China; School of Resources and Materials, Northeastern University at Qinhuangdao, Qinhuangdao 066004, Hebei, China; Key Laboratory of Dielectric and Electrolyte Functional Material Hebei Province, Qinhuangdao 066004, Hebei, China; Key Laboratory of Resources Cleaner Conversion and Efficient Utilization Qinhuangdao City, Qinhuangdao 066004, Hebei, China
| | - Shaohua Luo
- School of Materials Science and Engineering, Northeastern University, Shenyang 110819, Liaoning, China; School of Resources and Materials, Northeastern University at Qinhuangdao, Qinhuangdao 066004, Hebei, China; Key Laboratory of Dielectric and Electrolyte Functional Material Hebei Province, Qinhuangdao 066004, Hebei, China; Key Laboratory of Resources Cleaner Conversion and Efficient Utilization Qinhuangdao City, Qinhuangdao 066004, Hebei, China
| |
Collapse
|
33
|
Zhang J, Xie W, Chu S, Liu Z, Wu Z, Lan Y, Galvita VV, Zhang L, Su X. Sufficient extraction of Cr from chromium ore processing residue (COPR) by selective Mg removal. J Hazard Mater 2022; 440:129754. [PMID: 35985215 DOI: 10.1016/j.jhazmat.2022.129754] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/17/2022] [Revised: 07/26/2022] [Accepted: 08/08/2022] [Indexed: 06/15/2023]
Abstract
Chromium ore processing residue (COPR) is a hazardous waste generated during the production of chromate. Currently, approximately 10% of Cr2O3 cannot be extracted after chromite sodium roasting and remains in COPR, wasting valuable Cr resources. In this study, Mg was selectively removed by using (NH4)2SO4 roasting in combination with H2SO4 leaching. The results showed that the selective removal of 79.55% Mg from COPR could be achieved under the optimum (NH4)2SO4 roasting conditions (80 mmol (NH4)2SO4, 800 °C, 2 h). During the subsequent sodium roasting and acid leaching stages, the Cr extraction rate was 84.63% for the COPR direct roasting and 95.39% for the Mg removal residue roasting. The increased Cr extraction efficiency is attributed to the transformation of Mg-rich spinel and diopside (the Mg & Cr coexisting phases) in COPR converted into easily extractable (Fe,Cr)2O3 and Cr2O3 after the Mg treatment. This study investigated that the phase transformation of the Cr host phases is crucial for the sufficient extraction of Cr and provides inspiration for the development of efficient and practical Cr extraction techniques. Moreover, the method can be extended to the effective extraction of Cr from other Cr-containing wastes.
Collapse
Affiliation(s)
- Jing Zhang
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, Guangdong 510006, PR China
| | - Wenyu Xie
- Guangdong Provincial Key Laboratory of Petrochemical Pollution Process and Control, Guangdong University of Petrochemical Technology, Maoming 525000, PR China
| | - Shasha Chu
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, Guangdong 510006, PR China
| | - Zhangbin Liu
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, Guangdong 510006, PR China
| | - Zhen Wu
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, Guangdong 510006, PR China
| | - Yingying Lan
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, Guangdong 510006, PR China
| | - Vladimir V Galvita
- Laboratory for Chemical Technology, Ghent University, Technologiepark 125, 9052 Ghent, Belgium
| | - Lijuan Zhang
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, Guangdong 510006, PR China
| | - Xintai Su
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, Guangdong 510006, PR China.
| |
Collapse
|
34
|
Nguyen AHT, Nguyen MC, Nguyen AD, Yim JY, Kim JH, Park NH, Jeon SJ, Kwon D, Choi R. Impact of Pt grain size on ferroelectric properties of zirconium hafnium oxide by chemical solution deposition. Nano Converg 2022; 9:45. [PMID: 36197530 PMCID: PMC9535072 DOI: 10.1186/s40580-022-00334-6] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 05/09/2022] [Accepted: 09/15/2022] [Indexed: 06/16/2023]
Abstract
The effects of the grain size of Pt bottom electrodes on the ferroelectricity of hafnium zirconium oxide (HZO) were studied in terms of the orthorhombic phase transformation. HZO thin films were deposited by chemical solution deposition on the Pt bottom electrodes with various grain sizes which had been deposited by direct current sputtering. All the samples were crystallized by rapid thermal annealing at 700 °C to allow a phase transformation. The crystallographic phases were determined by grazing incidence X-ray diffraction, which showed that the bottom electrode with smaller Pt grains resulted in a larger orthorhombic phase composition in the HZO film. As a result, capacitors with smaller Pt grains for the bottom electrode showed greater ferroelectric polarization. The smaller grains produced larger in-plane stress which led to more orthorhombic phase transformation and higher ferroelectric polarization.
Collapse
Affiliation(s)
- An Hoang-Thuy Nguyen
- Department of Materials Science and Engineering, Inha University, Incheon, 22212, South Korea
| | - Manh-Cuong Nguyen
- Department of Electrical Engineering at, Inha University, Incheon, 22212, South Korea
| | - Anh-Duy Nguyen
- Department of Materials Science and Engineering, Inha University, Incheon, 22212, South Korea
| | - Ji-Yong Yim
- Department of Electrical Engineering at, Inha University, Incheon, 22212, South Korea
| | - Jeong-Han Kim
- Department of Electrical Engineering at, Inha University, Incheon, 22212, South Korea
| | - No-Hwal Park
- 3D Convergence Center at Inha University, Incheon, 22212, South Korea
| | - Seung-Joon Jeon
- 3D Convergence Center at Inha University, Incheon, 22212, South Korea
| | - Daewoong Kwon
- Department of Electrical Engineering at, Inha University, Incheon, 22212, South Korea.
| | - Rino Choi
- Department of Materials Science and Engineering, Inha University, Incheon, 22212, South Korea.
| |
Collapse
|
35
|
Yao S, Zhang Z, Guo S, Yu Z, Zhang X, Zuo P, Wang J, Yin G, Huo H. Hierarchical NiMn/NiMn-LDH/ppy-C induced by a novel phase-transformation activation process for long-life supercapacitor. J Colloid Interface Sci 2022; 622:1020-1028. [PMID: 35567950 DOI: 10.1016/j.jcis.2022.04.175] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/19/2022] [Revised: 04/27/2022] [Accepted: 04/30/2022] [Indexed: 10/18/2022]
Abstract
For micron-sized nickel-based hydroxides sheets, the reaction and migration of anions/water molecules in the inner region tends to lag behind those along the edge, which can cause structure mismatch and capacity degradation during cycles. Nanosizing and structure design is a feasible solution to shorten the ion/electron path and improve the reaction homogeneity. Herein, this study reports a novel three-stage strategy (self-assembly of NiMn-LDH/ppy-C - reduction to NiMn/ppy-C - in situ phase transformation into NiMn/NiMn-LDH/ppy-C) to reduce the sheet size of NiMn-LDH to nanometer. Triggered by electrochemical activation, NiMn-LDH nanosheets can hereby easily and orderly grow on the exposed active (111) crystal plane of Ni to establish NiMn-LDH/NiMn heterostructure around ppy-C. Importantly, nanosizing and hierarchical structure play a synergistic role to maintain structural integrity and to promote the electron/mass transfer kinetics. The NiMn/NiMn-LDH/ppy-C composite delivers superior cycling stability with almost no decay of capacity retention after 40,000 cycles at 5 A g-1. Our hierarchical morphology modulation provides an ingenious, efficient way to boost the performance of Ni-based layered hydroxide materials.
Collapse
Affiliation(s)
- Saisai Yao
- Key Laboratory of Materials for New Energy Conversion and Storage (Ministry of Industry Technology, Harbin 150001, China
| | - Zhiguo Zhang
- Key Laboratory of Materials for New Energy Conversion and Storage (Ministry of Industry Technology, Harbin 150001, China; Cell Engineering Department, Beijing Automotive Technology Center, Beijing 101300, China.
| | - Shu Guo
- Center of Analysis Measurement and Computing, Harbin Institute of Technology, Harbin150001, China
| | - Zhenjiang Yu
- Key Laboratory of Materials for New Energy Conversion and Storage (Ministry of Industry Technology, Harbin 150001, China
| | - Xueyan Zhang
- Key Laboratory of Materials for New Energy Conversion and Storage (Ministry of Industry Technology, Harbin 150001, China
| | - Pengjian Zuo
- Key Laboratory of Materials for New Energy Conversion and Storage (Ministry of Industry Technology, Harbin 150001, China
| | - Jiajun Wang
- Key Laboratory of Materials for New Energy Conversion and Storage (Ministry of Industry Technology, Harbin 150001, China
| | - Geping Yin
- Key Laboratory of Materials for New Energy Conversion and Storage (Ministry of Industry Technology, Harbin 150001, China
| | - Hua Huo
- Key Laboratory of Materials for New Energy Conversion and Storage (Ministry of Industry Technology, Harbin 150001, China.
| |
Collapse
|
36
|
Deng J, Ning XA, Shen J, Ou W, Chen J, Qiu G, Wang Y, He Y. Biomass waste as a clean reductant for iron recovery of iron tailings by magnetization roasting. J Environ Manage 2022; 317:115435. [PMID: 35751253 DOI: 10.1016/j.jenvman.2022.115435] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/30/2021] [Revised: 05/10/2022] [Accepted: 05/27/2022] [Indexed: 06/15/2023]
Abstract
The magnetization roasting with coal as primary reductants adds cost and causes environmental pollution. Therefore, it is of great importance to investigate the biomass application as a reductant for magnetization roasting to recover iron from low-utilization iron tailings for emission mitigation and green utilization. This study systematically investigated the impact of biomass (pyrolysis gas from agricultural and forestry waste) as a reductant on the conversion of iron tailings to magnetite in magnetization roasting. Additionally, the thermal decomposition of biomass, phase transformation and microstructure evolution of iron tailings were analyzed by TG, XRD, BET, and other methods to elucidate the conversion mechanism for facilitating magnetized hematite in iron tailings with biomass-derived gas. The results showed that woody biomass was a more appropriate reductant for magnetization roasting; 650 °C was the optimal temperature for the complete transformation of hematite to magnetite by reduction roasting with biomass waste. Through magnetic separation, the concentrate with an iron grade of 62.04% and iron recovery of 95.29% was obtained, and the saturation magnetization was enhanced from 0.60 emu/g to 58.03 emu/g of iron tailings. During the magnetization roasting, CO and H2 generated from biomass reduced the hematite in tailings particles from interior to exterior, forming a loose structure with rich microfissures, facilitating the subsequent separation operations. This study offers a novel reference for applying biomass to exploit hematite minerals and shows the potential of biomass for energy savings and emission reduction in the utilization of iron tailing resources.
Collapse
Affiliation(s)
- Jinhuan Deng
- Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou, 510006, China
| | - Xun-An Ning
- Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou, 510006, China.
| | - Junhua Shen
- Shaoguan Pengrui Environmental Protection Technology Co., Ltd., Shaoguan, 512625, China
| | - Weixuan Ou
- Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou, 510006, China
| | - Jiayi Chen
- Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou, 510006, China
| | - Guoqiang Qiu
- Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou, 510006, China
| | - Yi Wang
- Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou, 510006, China
| | - Yao He
- Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou, 510006, China
| |
Collapse
|
37
|
Shen X, Zhu H, Wang P, Zheng L, Hu S, Liu C. Mechanistic and modeling insights into the immobilization of Cd and organic carbon during abiotic transformation of ferrihydrite induced by Fe(II). J Hazard Mater 2022; 436:129216. [PMID: 35739738 DOI: 10.1016/j.jhazmat.2022.129216] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/24/2022] [Revised: 05/07/2022] [Accepted: 05/20/2022] [Indexed: 06/15/2023]
Abstract
Iron (Fe) oxides and fulvic acid (FA) are the key components affecting the fate of cadmium (Cd) in soil. The presence of FA influences Fe mineral transformation, and FA may complicate phase transformation and dynamic behavior of Cd. How varying Fe minerals and FA affect Cd immobilization during the ferrihydrite transformation induced by various Fe(II) concentrations, however, is still lack of quantitative understanding. In this study, we built a model for Cd species quantification during phase transformation based on mechanistic insights obtained from batch experiments. Spectroscopic analysis showed that Fe(II) concentrations affected secondary Fe minerals formation under the condition of co-existence of Cd and FA, and ultimately changed the distribution of Cd and FA. Microscopic analysis revealed that besides surface adsorption, part of Cd was sequestrated by magnetite, whereas FA was able to diffuse into lepidocrocite defects. The model revealed that adsorbed Cd was mainly controlled by FA and ferrihydrite, and direct complexation of Cd by FA had a strong impact on the continuous change in Cd at lower Fe(II) concentration. The results contribute to an in-depth understanding of the mobility of Cd in the environment and provide a method for quantifying the dynamic behavior of heavy metals in multi-reactant systems.
Collapse
Affiliation(s)
- Xinyue Shen
- State Environmental Protection Key Laboratory of Integrated Surface Water-Groundwater Pollution Control, School of the Environmental Science and Engineering, Southern University of Science and Technology, Shenzhen 518055, People's Republic of China
| | - Huiyan Zhu
- State Environmental Protection Key Laboratory of Integrated Surface Water-Groundwater Pollution Control, School of the Environmental Science and Engineering, Southern University of Science and Technology, Shenzhen 518055, People's Republic of China
| | - Pei Wang
- National-Regional Joint Engineering Research Center for Soil Pollution Control and Remediation in South China, Guangdong Key Laboratory of Integrated Agro-environmental Pollution Control and Management, Institute of Eco-environmental and Soil Sciences, Guangdong Academy of Sciences, Guangzhou 510650, People's Republic of China
| | - Lirong Zheng
- Beijing Synchrotron Radiation Facility (BSRF), Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, People's Republic of China
| | - Shiwen Hu
- State Environmental Protection Key Laboratory of Integrated Surface Water-Groundwater Pollution Control, School of the Environmental Science and Engineering, Southern University of Science and Technology, Shenzhen 518055, People's Republic of China.
| | - Chongxuan Liu
- State Environmental Protection Key Laboratory of Integrated Surface Water-Groundwater Pollution Control, School of the Environmental Science and Engineering, Southern University of Science and Technology, Shenzhen 518055, People's Republic of China
| |
Collapse
|
38
|
Abstract
Two-dimensional (2D) PtSe2 has potential applications in near-infrared optoelectronics because its band gap can be tuned by varying the layer thickness. There are several different platinum-selenide phases with different stoichiometries that result from high-temperature processing. In this report, we use in situ scanning/transmission electron microscopy (STEM) to investigate high-temperature phase transitions in 2D PtSe2 and observe interfacial reactions as well as the Kirkendall effect. The 2D nature of PtSe2 plays a key role in the unique one-dimensional interfaces that result during the formation of Se-poor phases (PtSe and PtSe1-x) at the edges of the PtSe2 crystals. The activation energy extracted for this formation suggests that the process is mediated by Se vacancies, as evidenced by the large strain variations in the material made via 4D STEM measurements. The observation of the Kirkendall effect in a 2D material suggests routes to engineer 1D edge chemistry for contact engineering in device applications.
Collapse
Affiliation(s)
- Pawan Kumar
- Department of Electrical and Systems Engineering, University of Pennsylvania, Philadelphia, Pennsylvania 19104, United States
- Department of Materials Science and Engineering, University of Pennsylvania, Philadelphia, Pennsylvania 19104, United States
| | - Andrew C Meng
- Department of Materials Science and Engineering, University of Pennsylvania, Philadelphia, Pennsylvania 19104, United States
| | - Kiyoung Jo
- Department of Electrical and Systems Engineering, University of Pennsylvania, Philadelphia, Pennsylvania 19104, United States
| | - Eric A Stach
- Department of Materials Science and Engineering, University of Pennsylvania, Philadelphia, Pennsylvania 19104, United States
| | - Deep Jariwala
- Department of Electrical and Systems Engineering, University of Pennsylvania, Philadelphia, Pennsylvania 19104, United States
| |
Collapse
|
39
|
Qiu Y, Liu Z, Zhang X, Sun A, Liu J. Synergistic effect of oxidation etching and phase transformation triggered by controllable ion-bath microenvironments toward constructing ultra-thin porous nanosheets for accelerated industrial water splitting at high current density. J Colloid Interface Sci 2022; 625:50-58. [PMID: 35714408 DOI: 10.1016/j.jcis.2022.05.162] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/09/2022] [Revised: 05/24/2022] [Accepted: 05/28/2022] [Indexed: 11/30/2022]
Abstract
Precisely tailoring the structure of inorganic materials at the micron and nanometer scales, especially in collaboration with component customization to design efficient, stable and low-cost transition-metal-based catalysts for industrial electrocatalytic water splitting (EWS) is a key renewable energy technology, but still facing a daunting challenge. Here, the controllable escape of Ni atom is adopted to disturb the hydrothermal ion-bath environment, thereby resulting in the coexistence of high valence Ni and Fe ions. Combined with a one-step hydrothermal coordination strategy, the timeline-adjusted ion-bath microenvironment can effectively trigger the phase transformation of carbonate hydroxide hydrate nanosheets (NFCH) to nickel ferrite intercalated NFCH ultra-thin porous nanosheets (NF-CH-O). Thanks to the high-energy phase boundary synergistic effect and the rapid mass transfer advantages of ultra-thin porous nanostructures, the as-prepared NF-CH-O nanosheets exhibit remarkable oxygen and hydrogen evolution reaction (OER/HER) catalytic activity and stability, with low overpotentials of 207/191 mV at 50 mA cm-2, respectively, as well as the activity retention for 100 h. The alkaline water electrolyzer set up with NF-CH-O as both anodic and cathodic electrodes only requires a cell potential of 1.688 V to reach 50 mA cm-2 in a continuous operation of 100 h. More impressively, NF-CH-O only requires overpotentials of 266, 292 mV and 1.877 V to drive high current densities up to 500 mA cm-2 for OER, HER and EWS, respectively, and exhibits excellent stability with a reduction in the activity of less than 10% over cycles of more than 65 h. This work highlights the room-temperature controllable ion-bath oxidative etching strategy to design efficient bifunctional catalysts with ultra-thin porous structure and high-current-density activity. Meanwhile, combined with the advantages of direct growth on the substrate for mass production, such meticulous consideration of nanostructured design will be more competitive in the H2-production industry.
Collapse
Affiliation(s)
- Yanling Qiu
- College of Materials Science and Engineering, Institute for Graphene Applied Technology Innovation, Qingdao University, Qingdao 266071, China
| | - Zhiqiang Liu
- College of Materials Science and Engineering, Institute for Graphene Applied Technology Innovation, Qingdao University, Qingdao 266071, China
| | - Xinyue Zhang
- College of Materials Science and Engineering, Institute for Graphene Applied Technology Innovation, Qingdao University, Qingdao 266071, China
| | - Aowei Sun
- College of Materials Science and Engineering, Institute for Graphene Applied Technology Innovation, Qingdao University, Qingdao 266071, China
| | - Jingquan Liu
- College of Materials Science and Engineering, Institute for Graphene Applied Technology Innovation, Qingdao University, Qingdao 266071, China; College of Materials Science and Engineering, Linyi University, Linyi, Shandong, 276000, China.
| |
Collapse
|
40
|
Li Q, Zhang Y, Yu L, Cao K, Si M, Liao Q, Zhao F, Yang W, Yang Z. Performance and mechanisms of microwave-assisted zerovalent iron/pyrite for advance remediation of strongly alkaline high Cr(VI) contaminated soil. Environ Pollut 2022; 298:118855. [PMID: 35051549 DOI: 10.1016/j.envpol.2022.118855] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/05/2021] [Revised: 12/25/2021] [Accepted: 01/12/2022] [Indexed: 06/14/2023]
Abstract
Strongly alkaline high Cr(VI) contaminated (SAHCR) soil poses a high risk to the environment and public health, yet lacks rapid and efficient remediation technology. In this study, a novel approach combining microwave irradiation with zerovalent iron/pyrite (FeS2/ZVI) was developed for the remediation of SAHCR soil. The results indicated that fast and efficient remediation of the SAHCR soil was achieved by microwave irradiation-assisted FeS2/ZVI, with 99.9% of removal rate of Cr(VI) within 10 min, and Cr(VI) concentration from 3900.8 plummeted to 2.38 mg kg-1. The data of Cr(VI) reduction kinetics at different temperatures indicated that the activation energies (Ea) for microwave-FeS2/ZVI system was 27.4 kJ mol-1, 28.5% lower than that without microwave irradiation, suggesting that in addition to the heating effect of microwave, the accelerated Cr(VI) reduction also comes from the catalytic effect of "hot spots" on FeS2/ZVI under microwave irradiation. Furthermore, it was demonstrated that microwave irradiation promoted the transformation of reduced Cr(III) into the stable FeCr2O4 mineral and the excellent long-term stability of the remediated SAHCR soil. These findings can provide a perspective for advanced remediation of the difficult-to-treat SAHCR soil by the synergism of microwave irradiation with the iron-sulfur based reducing materials.
Collapse
Affiliation(s)
- Qi Li
- School of Metallurgy and Environment, Central South University, Changsha, 410083, PR China
| | - Yujia Zhang
- School of Metallurgy and Environment, Central South University, Changsha, 410083, PR China
| | - Lin Yu
- School of Metallurgy and Environment, Central South University, Changsha, 410083, PR China
| | - Kaiting Cao
- School of Metallurgy and Environment, Central South University, Changsha, 410083, PR China
| | - Mengying Si
- School of Metallurgy and Environment, Central South University, Changsha, 410083, PR China; Chinese National Engineering Research Centre for Control & Treatment of Heavy Metal Pollution, Changsha, 410083, PR China
| | - Qi Liao
- School of Metallurgy and Environment, Central South University, Changsha, 410083, PR China; Chinese National Engineering Research Centre for Control & Treatment of Heavy Metal Pollution, Changsha, 410083, PR China
| | - Feiping Zhao
- School of Metallurgy and Environment, Central South University, Changsha, 410083, PR China; Chinese National Engineering Research Centre for Control & Treatment of Heavy Metal Pollution, Changsha, 410083, PR China
| | - Weichun Yang
- School of Metallurgy and Environment, Central South University, Changsha, 410083, PR China; Chinese National Engineering Research Centre for Control & Treatment of Heavy Metal Pollution, Changsha, 410083, PR China.
| | - Zhihui Yang
- School of Metallurgy and Environment, Central South University, Changsha, 410083, PR China; Chinese National Engineering Research Centre for Control & Treatment of Heavy Metal Pollution, Changsha, 410083, PR China
| |
Collapse
|
41
|
Ozturk I, Caglar I, Duymus ZY. The effect of adjustment and finishing procedure on roughness, strength, and phase transformation of monolithic zirconia. Clin Oral Investig 2022; 26:4761-4768. [PMID: 35292846 DOI: 10.1007/s00784-022-04440-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/31/2021] [Accepted: 03/03/2022] [Indexed: 11/28/2022]
Abstract
OBJECTIVE To evaluate the effect of adjustment and finishing procedures and thermal aging of monolithic zirconia on the surface roughness, phase transformation, and flexural strength. MATERIAL AND METHODS One hundred disk-shaped monolithic zirconia specimens were randomly divided into 5 groups: control, received only glazing; group Gr, was grinded; group GrP, was grinded and polished; group GrG, was grinded and re-glazed; group GrPG, was re-glazed after grinding and polishing. Half of the each group were stored in distilled water for 24 h and the remaining were thermocycled for 5000 cycles. Topographic evaluations were done with profilometer and scanning electron microscope. Phase changes were assessed through X-ray diffractometer. The biaxial flexural strength test was calculated by universal test machine. Statistical analysis was performed by using two-way ANOVA and Tukey multiple comparison test (p < 0.05). RESULTS Group Gr showed statistically higher surface roughness and flexural strength values than the other groups (p < 0.001). However, no significant differences were observed between finishing groups (p >0.05). Phase transformation was occurred in all groups but the differences were not statically significant (p >0.05). Artificial aging had no effect on surface roughness, flexural strength, and phase transformation (p >0.05). CONCLUSION Surface roughness significantly increased after grinding, but finishing procedure approximated it to the control group. Glazing after grinding decreased the flexural strength, but polishing did not. Zirconia polishing system may be an alternative to re-glazing for monolithic zirconia. CLINICAL RELEVANCE Polishing is one of the most effective finishing procedures that can improve the physical properties of the material without damaging its mechanical properties.
Collapse
Affiliation(s)
| | - Ipek Caglar
- Department of Prosthodontics, Faculty of Dentistry, Recep Tayyip Erdogan University, Islampasa, Kurtuluş St. No: 28, 53020, Rize, Turkey.
| | - Zeynep Yesil Duymus
- Department of Prosthodontics, Faculty of Dentistry, Recep Tayyip Erdogan University, Islampasa, Kurtuluş St. No: 28, 53020, Rize, Turkey.,Department of Prosthodontics, Faculty of Dentistry, Ataturk University, Atatürk St, 25240, Erzurum, Turkey
| |
Collapse
|
42
|
Ding Z, Sun G, Fu F, Ye C. Phase transformation of Cr(VI)-adsorbed ferrihydrite in the presence of Mn(II): Fate of Mn(II) and Cr(VI). J Environ Sci (China) 2022; 113:251-259. [PMID: 34963533 DOI: 10.1016/j.jes.2021.06.012] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/04/2021] [Revised: 06/10/2021] [Accepted: 06/10/2021] [Indexed: 06/14/2023]
Abstract
Ferrihydrite is an important sink for the toxic heavy metal ions, such as Cr(VI). As ferrihydrite is thermodynamically unstable and gradually transforms into hematite and goethite, the stability of Cr(VI)-adsorbed ferrihydrite is environmentally significant. This study investigated the phase transformation of Cr(VI)-adsorbed ferrihydrite at different pH in the presence of aqueous Mn(II), as well as the fate of Mn(II) and Cr(VI) in the transformation process of ferrihydrite. Among the ferrihydrite transformation products, hematite was dominant, and goethite was minor. The pre-adsorbed Cr(VI) inhibited the conversion of ferrihydrite to goethite at initial pH 3.0, whereas little amount of adsorbed Mn(II) favored the formation of goethite at initial pH 7.0. After the aging process, Cr species in solid phase existed primarily as Cr(III) in the presence of Mn(II) at initial pH 7.0 and 11.0. The aqueous Mn concentration was predominantly unchanged at initial pH 3.0, whereas the aqueous Mn(II) was adsorbed onto ferrihydrite or form Mn(OH)2 precipitates at initial pH 7.0 and 11.0, promoting the immobilization of Cr(VI). Moreover, the oxidation of Mn(II) occurred at initial pH 7.0 and 11.0, forming Mn(III/IV) (hydr)oxides.
Collapse
Affiliation(s)
- Zecong Ding
- School of Environmental Science and Engineering, Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Guangdong University of Technology, Guangzhou 510006, China
| | - Guangzhao Sun
- School of Environmental Science and Engineering, Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Guangdong University of Technology, Guangzhou 510006, China
| | - Fenglian Fu
- School of Environmental Science and Engineering, Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Guangdong University of Technology, Guangzhou 510006, China.
| | - Chujia Ye
- School of Environmental Science and Engineering, Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Guangdong University of Technology, Guangzhou 510006, China
| |
Collapse
|
43
|
Appiah-Ntiamoah R, Kim H. Electrochemically engineered zinc(iron)oxyhydroxide/zinc ferrite heterostructure with interfacial microstructure and hydrophilicity ideal for supercapacitors. J Colloid Interface Sci 2022; 606:607-617. [PMID: 34416453 DOI: 10.1016/j.jcis.2021.08.053] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/17/2021] [Revised: 07/29/2021] [Accepted: 08/07/2021] [Indexed: 11/16/2022]
Abstract
Zinc ferrite@nickel foam (ZF@Nf) is a potential commercial supercapacitor electrode due to its large theoretical capacity, abundant elemental composition, excellent conductivity, and stability. However, deficient active sites limit its specific capacitance (SC). Herein, we demonstrate that engineering ZF's interfacial microstructure and hydrophilicity mitigate this limitation. ZF@Nf is used as the working electrode in a 3-electrode cell and subjected to multiple oxygen evolution reaction cycles in potassium hydroxide. Systematic changes in ZF's porosity, crystallinity, hydrophilicity, and composition after each cycle were characterised using spectroscopy, sorption isotherm, microscopy and photography techniques. During cycling, the edges of ZF partially phase-transform into a dense polycrystalline zinc(iron)oxyhydroxide film via semi-reversible oxidation resulting in zinc(iron)oxyhydroxide/ZF interface formation. The maximum ion-accessible zinc(iron)oxyhydroxide film density is obtained after 1000 cycles. Strong ionic interaction at the interface induces high hydrophilicity, this together with the 3-dimensional diffusion channels of the zinc(iron)oxyhydroxide significantly increase electroactive surface area and decrease ion diffusion resistance. Consequently, the SC, energy density, and rate-capability of the interface compare favourably with state-of-the-art electrodes. The strong interfacial interaction and polycrystallinity also ensure long-term electrochemical stability. This study proves the direct correlation between interfacial microstructure and hydrophilicity, and SC which provides a blueprint for future energy-storage electrode design.
Collapse
Affiliation(s)
- Richard Appiah-Ntiamoah
- Department of Energy Science and Technology, Environmental Waste Recycle Institute, Myongji University, Yongin, Gyeonggi-do 17058, Republic of Korea.
| | - Hern Kim
- Department of Energy Science and Technology, Environmental Waste Recycle Institute, Myongji University, Yongin, Gyeonggi-do 17058, Republic of Korea.
| |
Collapse
|
44
|
Sarngan PP, Lakshmanan A, Sarkar D. Influence of Anatase-Rutile Ratio on Band Edge Position and Defect States of TiO 2 Homojunction Catalyst. Chemosphere 2022; 286:131692. [PMID: 34340114 DOI: 10.1016/j.chemosphere.2021.131692] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/29/2021] [Revised: 07/19/2021] [Accepted: 07/25/2021] [Indexed: 06/13/2023]
Abstract
Removal of toxic air and water dissociation in the environment has become a major challenging issue throughout the world. Mixed phase rutile-anatase titanium dioxide catalysts are very effective in photocatalysis and have been studied extensively. However, the mechanism causing this effect and band alignment of the two phases are not fully understood. Pointing to the issue, we have designed one-dimensional mixed-phase TiO2 and introduced defects near the valence band. Experimental results showed that band alignment between two phases, up-shift of the band edge, and optimum anatase percentage play a key role in the enhancement of the photocatalytic activity. We predicted shifts in band edge originating from surface electric dipole layer induced by defects.
Collapse
Affiliation(s)
- Pooja P Sarngan
- Applied NanoPhysics Laboratory, Department of Physics and Nanotechnology, SRM Institute of Science and Technology, Kattankulathur, 603203, India
| | - Agasthiyaraj Lakshmanan
- Applied NanoPhysics Laboratory, Department of Physics and Nanotechnology, SRM Institute of Science and Technology, Kattankulathur, 603203, India
| | - Debabrata Sarkar
- Applied NanoPhysics Laboratory, Department of Physics and Nanotechnology, SRM Institute of Science and Technology, Kattankulathur, 603203, India.
| |
Collapse
|
45
|
Yu MK, Oh EJ, Lim MJ, Lee KW. Change of phase transformation and bond strength of Y-TZP with various hydrofluoric acid etching. Restor Dent Endod 2021; 46:e54. [PMID: 34909418 PMCID: PMC8636086 DOI: 10.5395/rde.2021.46.e54] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/28/2021] [Revised: 08/18/2021] [Accepted: 09/01/2021] [Indexed: 11/24/2022] Open
Abstract
Objectives The purpose of this study was to quantify phase transformation after hydrofluoric acid (HF) etching at various concentrations on the surface of yttria-stabilized tetragonal zirconia polycrystal (Y-TZP), and to evaluate changes in bonding strength before and after thermal cycling. Materials and Methods A group whose Y-TZP surface was treated with tribochemical silica abrasion (TS) was used as the control. Y-TZP specimens from each experimental group were etched with 5%, 10%, 20%, and 40% HF solutions at room temperature for 10 minutes. First, to quantify the phase transformation, Y-TZP specimens (n = 5) treated with TS, 5%, 10%, 20% and 40% HF solutions were subjected to X-ray diffraction. Second, to evaluate the change in bond strength before and after thermal cycling, zirconia primer and MDP-containing resin cement were sequentially applied to the Y-TZP specimen. After 5,000 thermal cycles for half of the Y-TZP specimens, shear bond strength was measured for all experimental groups (n = 10). Results The monoclinic phase content in the 40% HF-treated group was higher than that of the 5%, 10%, and 20% HF-treated groups, but lower than that of TS-treated group (p < 0.05). The 40% HF-treated group showed significantly higher bonding strength than the TS, 5%, and 10% HF-treated groups, even after thermal cycling (p < 0.05). Conclusions Through this experiment, the group treated with SiO2 containing air-borne abrasion on the Y-TZP surface showed higher phase transformation and higher reduction in bonding strength after thermal cycling compared to the group treated with high concentration HF.
Collapse
Affiliation(s)
- Mi-Kyung Yu
- Department of Conservative Dentistry, Jeonbuk National University School of Dentistry, Jeonju, Korea.,Research Institute of Clinical Medicine Jeonbuk National University-Biomedical Research Institute of Jeonbuk National University Hospital, Jeonju, Korea
| | - Eun-Jin Oh
- Department of Conservative Dentistry, Jeonbuk National University School of Dentistry, Jeonju, Korea
| | - Myung-Jin Lim
- Department of Conservative Dentistry, Jeonbuk National University School of Dentistry, Jeonju, Korea
| | - Kwang-Won Lee
- Department of Conservative Dentistry, Jeonbuk National University School of Dentistry, Jeonju, Korea.,Research Institute of Clinical Medicine Jeonbuk National University-Biomedical Research Institute of Jeonbuk National University Hospital, Jeonju, Korea
| |
Collapse
|
46
|
Ding H, Yu H, Han Q. Transformation of phase and heterojunction type by using HAc-adsorbed Bi(NO 3) 3 as a Bi source. J Colloid Interface Sci 2021; 604:429-440. [PMID: 34271494 DOI: 10.1016/j.jcis.2021.07.021] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/19/2021] [Revised: 07/02/2021] [Accepted: 07/04/2021] [Indexed: 10/20/2022]
Abstract
Generally, preparing high-efficiency heterojunction photocatalysts via a facile room-temperature route is attractive from the perspective of energy and labor saving. Herein, by using dried and glacial acetic acid (HAc)-adsorbed bismuth nitrate, instead of Bi(NO3)3·5H2O, as a Bi source, a β-Bi2O3/Bi5O7I heterojunction with well dispersed flowery hierarchical architecture was synthesized, which endows it with high surface area, open channels and good light harvest. More importantly, the change of the precursor achieved a successful transformation for both of phase and heterojunction type, i.e. from type-Ⅰ BiOI/[Bi6O5(OH)3](NO3)5·3H2O (labeled as BiOI/BBN) to Z-scheme β-Bi2O3/Bi5O7I heterojunction. Since both β-Bi2O3 and Bi5O7I are visible light responsive, β-Bi2O3/Bi5O7I exhibited improved visible-light photocatalytic activity for the degradation of tetracycline (TC) and malachite green (MG) with apparent reactant rate (kapp) values about 10 and 11 times higher than those of BiOI/BBN. Besides, the presence of more oxygen vacancies also contributed to the enhancement in photocatalytic performance.
Collapse
Affiliation(s)
- Huiwei Ding
- Key Laboratory for Soft Chemistry and Functional Materials, Ministry of Education, Nanjing University of Science and Technology, Nanjing 210094, China
| | - Huimei Yu
- Key Laboratory for Soft Chemistry and Functional Materials, Ministry of Education, Nanjing University of Science and Technology, Nanjing 210094, China
| | - Qiaofeng Han
- Key Laboratory for Soft Chemistry and Functional Materials, Ministry of Education, Nanjing University of Science and Technology, Nanjing 210094, China.
| |
Collapse
|
47
|
Zhao B, Zhang Q, Fu X, Qiao D, Zhang L, Chen X, Gu L, Lu Y, Yu Q. Brittle-to-ductile transition in Ti-Pt intermetallic compounds. Sci Bull (Beijing) 2021; 66:2281-2287. [PMID: 36654456 DOI: 10.1016/j.scib.2021.06.021] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/08/2021] [Revised: 05/11/2021] [Accepted: 06/11/2021] [Indexed: 01/20/2023]
Abstract
Phase transformation changes numerous properties of materials. Ti-Pt alloys have received much interest because of high martensitic transformation temperature. However, the intrinsic brittleness of these intermetallic compounds with low crystal symmetry and complicated phase structure limit their applications, especially when composition deviates from stoichiometry ratio. By performing in situ heating high-resolution scanning transmission electron microscopy experiment and micro-mechanical testing on Ti-35 at% Pt that contained majorly Ti3Pt and αTiPt phases, it was found that precipitating herringbone twinned αTiPt islands within Ti3Pt could occur upon heating, significantly refining mixed-phase structure. The refinement of multi-intermetallic mixed-phase structure endowed brittle material with remarkable capacity for plastic deformation and strain hardening. The plastic deformation mechanisms include phase transformation upon yielding and dislocation slips during hardening, which rarely occurs in intermetallic compounds with low symmetry. The strong interaction between different deformation modes even caused nano-crystallization along slip bands. The results demonstrate that brittle-to-ductile transition in intermetallic compounds can be achieved by tuning mixed-phase structure through phase transformations.
Collapse
Affiliation(s)
- Beikai Zhao
- Center of Electron Microscopy and State Key Laboratory of Silicon Materials, School of Materials Science and Engineering, Zhejiang University, Hangzhou 310027, China
| | - Qinghua Zhang
- Beijing National Laboratory for Condensed Matter Physics, Collaborative Innovation Center of Quantum Matter, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China
| | - Xiaoqian Fu
- Center of Electron Microscopy and State Key Laboratory of Silicon Materials, School of Materials Science and Engineering, Zhejiang University, Hangzhou 310027, China
| | - Dongxu Qiao
- Key Laboratory of Solidification Control and Digital Preparation Technology (Liaoning Province), School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, China
| | - Ling Zhang
- College of Materials Science and Engineering, Chongqing University, Chongqing 400045, China
| | - Xiao Chen
- Beijing Key Laboratory of Green Chemical Reaction Engineering and Technology, Department of Chemical Engineering, Tsinghua University, Beijing 100084, China
| | - Lin Gu
- Beijing National Laboratory for Condensed Matter Physics, Collaborative Innovation Center of Quantum Matter, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China
| | - Yiping Lu
- Key Laboratory of Solidification Control and Digital Preparation Technology (Liaoning Province), School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, China.
| | - Qian Yu
- Center of Electron Microscopy and State Key Laboratory of Silicon Materials, School of Materials Science and Engineering, Zhejiang University, Hangzhou 310027, China.
| |
Collapse
|
48
|
Alfrisany NM, De Souza GM. Surface and bulk properties of zirconia as a function of composition and aging. J Mech Behav Biomed Mater 2021; 126:104994. [PMID: 34864575 DOI: 10.1016/j.jmbbm.2021.104994] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/30/2021] [Revised: 11/18/2021] [Accepted: 11/21/2021] [Indexed: 01/08/2023]
Abstract
Yttria-stabilized zirconia (Y-SZ) materials with different levels of translucency have been used for indirect dental restorations. Y-SZ composition and microstructure are modified to improve translucency, and it is not clear how these materials respond to aging. This study evaluated the effect of hydrothermal aging (HA) performed in an autoclave on the properties of four dental Y-SZ materials with different compositions. Sintered bar-shaped specimens (14 x 4 x 2 mm) were prepared from four different zirconia-based materials (n = 40): low translucency 3 mol % Y-SZ (3Y-LT; Ceramill ZI, Amann Girrbach); high translucency 4 mol % Y-SZ (4Y-HT; Ceramill Zolid); and two high translucency 5 mol % Y-SZ (5Y-HT - Lava Esthetic, 3M; 5Y-SHT - Ceramill Zolid FX). Fully sintered specimens were exposed to HA for different times (control - 0 h, 5 h, 10 h, or 15 h at 134 °C, 2 bar pressure) and characterized for surface roughness, flexural strength (three-point bending), hardness and elastic modulus (nanoindentation), surface wettability (sessile drop technique) and crystalline content (x-ray diffraction, XRD). Data was analyzed by two-way ANOVA and Tukey HSD (p < 0.05). Zirconia composition significantly affected roughness (p = 0.016). Zirconia*aging interaction affected flexural strength (p = 0.012), surface wettability (p < 0.001), and hardness (p = 0.002). Zirconia composition (p = 0.011) and aging (p = 0.001) affected elastic modulus, while the interaction effect was not significant (p = 0.94). HA affects zirconia-based materials in different degrees. For 3Y-LT and 4Y-HT, surface and bulk properties were affected by aging to a similar extent. However, surface and bulk properties may change during clinical use as a result of prolonged degradation of Y-SZ.
Collapse
|
49
|
Kaur N, Haugstad G, Suryanarayanan R. Use of Atomic Force Microscopy (AFM) to monitor surface crystallization in caffeine-oxalic acid (CAFOXA) cocrystal compacts. Int J Pharm 2021; 609:121196. [PMID: 34662647 DOI: 10.1016/j.ijpharm.2021.121196] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/02/2021] [Revised: 10/05/2021] [Accepted: 10/10/2021] [Indexed: 11/28/2022]
Abstract
Our objective was to monitor the surface crystallization in disordered caffeine-oxalic acid (CAFOXA) cocrystals following exposure to elevated water vapor pressure. This was accomplished using atomic force microscopy (AFM). Disorder was induced in the cocrystal particles by the common pharmaceutical unit operations of milling and compaction. The 'activated' solid, upon exposure to elevated water vapor pressure, had a high propensity to sorb water. This led to a rise in molecular mobility and the surface underwent rapid crystallization to form needle shaped crystals of CAFOXA. Using AFM height and phase imaging, we were able to directly visualize phase transformations on the compact surface. The milled compacts exhibited higher processing induced disorder than the unmilled compacts, thereby accelerating the surface recrystallization.
Collapse
Affiliation(s)
- Navpreet Kaur
- Department of Pharmaceutics, College of Pharmacy, University of Minnesota, Minneapolis, MN 55455, USA
| | - Greg Haugstad
- CSE Characterization Facility, University of Minnesota, Minneapolis, MN 55455, USA
| | - Raj Suryanarayanan
- Department of Pharmaceutics, College of Pharmacy, University of Minnesota, Minneapolis, MN 55455, USA.
| |
Collapse
|
50
|
Peng X, Zheng J, Liu Q, Hu Q, Sun X, Li J, Liu W, Lin Z. Efficient removal of iron from red gypsum via synergistic regulation of gypsum phase transformation and iron speciation. Sci Total Environ 2021; 791:148319. [PMID: 34412386 DOI: 10.1016/j.scitotenv.2021.148319] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/05/2021] [Revised: 05/29/2021] [Accepted: 06/04/2021] [Indexed: 06/13/2023]
Abstract
Red gypsum is a type of iron-rich gypsum residue originated from industrial titanium dioxide process using Ilmenite. Currently, it has a low rate of comprehensive utilization about 20%, and deep removal of iron impurity is the crucial factor that directly limits its multipurpose utilization. In this study, the iron was efficiently removed from red gypsum residue by synergistic controlling the phase transformation of gypsum and the iron speciation under hydrothermal conditions. The iron removal efficiency was more than 99% under the optimized treatment condition (i.e. liquid-solid ratio of 10, with 1.5 M HCl as mineralizer, heating at 140 °C for 6 h). The X-ray powder diffraction (XRD) and scanning electron microscopy (SEM) analyses showed that the phase transformation and crystal growth of gypsum accelerated by H+ was the essential reasons to fully remove iron. Moreover, H+ also provided acidic conditions (pH < 1) to change the iron speciation from amorphous oxide or hydroxide fine particles into soluble Fe3+ which release into the solution and easy to be removed by solid-liquid separation. In this work, based on the synergistic regulation of gypsum phase transformation and iron speciation, a feasible method for deep removal of iron from red gypsum was proposed, which is conducive to broadening the comprehensive utilization range of red gypsum. This work would inspire the treatment and resource utilization of industrial gypsum residues containing other contaminants or impurities, including heavy metals and organic matters.
Collapse
Affiliation(s)
- Xiaoqian Peng
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, Guangdong 510006, PR China; The Key Laboratory of Pollution Control and Ecosystem Restoration in Industry Clusters (Ministry of Education), Guangzhou, Guangdong 510006, PR China
| | - Jiayi Zheng
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, Guangdong 510006, PR China; The Key Laboratory of Pollution Control and Ecosystem Restoration in Industry Clusters (Ministry of Education), Guangzhou, Guangdong 510006, PR China
| | - Qian Liu
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, Guangdong 510006, PR China
| | - Qimei Hu
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, Guangdong 510006, PR China; The Key Laboratory of Pollution Control and Ecosystem Restoration in Industry Clusters (Ministry of Education), Guangzhou, Guangdong 510006, PR China
| | - Xing Sun
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, Guangdong 510006, PR China; The Key Laboratory of Pollution Control and Ecosystem Restoration in Industry Clusters (Ministry of Education), Guangzhou, Guangdong 510006, PR China
| | - Jie Li
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, Guangdong 510006, PR China
| | - Weizhen Liu
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, Guangdong 510006, PR China; The Key Laboratory of Pollution Control and Ecosystem Restoration in Industry Clusters (Ministry of Education), Guangzhou, Guangdong 510006, PR China.
| | - Zhang Lin
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, Guangdong 510006, PR China; Chinese National Engineering Research Center for Control & Treatment of Heavy Metal Pollution, School of Metallurgy and Environment, Central South University, Changsha, Hunan 410083, PR China
| |
Collapse
|