Decoding Excimer Formation in Covalent-Organic Frameworks Induced by Morphology and Ring Torsion

A thorough and quantitative understanding of the fate of excitons in covalent-organic frameworks (COFs) after photoexcitation is essential for their augmented optoelectronic and photocatalytic applications via precise structure tuning. The synthesis of a library of COFs having identical chemical backbone with impeded conjugation, but varied morphology and surface topography to study the effect of these physical properties on the photophysics of the materials is herein reported. The variation of crystallite size and surface topography substantified different aggregation pattern in the COFs, which leads to disparities in their photoexcitation and relaxation properties. Depending on aggregation, an inverse correlation between bulk luminescence decay time and exciton binding energy of the materials is perceived. Further transient absorption spectroscopic analysis confirms the presence of highly localized, immobile, Frenkel excitons (of diameter 0.3-0.5 nm) via an absence of annihilation at high density, most likely induced by structural torsion of the COF skeletons, which in turn preferentially relaxes via long-lived (nanosecond to microsecond) excimer formation (in femtosecond scale) over direct emission. These insights underpin the importance of structural and topological design of COFs for their targeted use in photocatalysis.

Energy Transfer and Radical-Pair Dynamics in Photosystem I with Different Red Chlorophyll a Pigments

We establish a general kinetic scheme for the energy transfer and radical-pair dynamics in photosystem I (PSI) of Chlamydomonas reinhardtii, Synechocystis PCC6803, Thermosynechococcus elongatus and Spirulina platensis grown under white-light conditions. With the help of simultaneous target analysis of transient-absorption data sets measured with two selective excitations, we resolved the spectral and kinetic properties of the different species present in PSI. WL-PSI can be described as a Bulk Chl a in equilibrium with a higher-energy Chl a, one or two Red Chl a and a reaction-center compartment (WL-RC). Three radical pairs (RPs) have been resolved with very similar properties in the four model organisms. The charge separation is virtually irreversible with a rate of ≈900 ns-1. The second rate, of RP1 → RP2, ranges from 70-90 ns-1 and the third rate, of RP2 → RP3, is ≈30 ns-1. Since RP1 and the Red Chl a are simultaneously present, resolving the RP1 properties is challenging. In Chlamydomonas reinhardtii, the excited WL-RC and Bulk Chl a compartments equilibrate with a lifetime of ≈0.28 ps, whereas the Red and the Bulk Chl a compartments equilibrate with a lifetime of ≈2.65 ps. We present a description of the thermodynamic properties of the model organisms at room temperature.

Enhancing Carrier Transport in 2D/3D Perovskite Heterostructures through Organic Cation Fluorination

The interfacial 2D/3D perovskite heterostructures have attracted extensive attention due to their unique ability to combine the high stability of 2D perovskites with the remarkable efficiency of 3D perovskites. However, the carrier transport mechanism within the 2D/3D perovskite heterostructures remains unclear. In this study, the carrier transport dynamics in 2D/3D perovskite heterostructures through a variety of time-resolved spectroscopic measurements is systematically investigated. Time-resolved photoluminescence results reveal nanosecond hole transfer from the 3D to 2D perovskites, with enhanced efficiency through the introduction of fluorine atoms on the phenethylammonium (PEA) cation. Transient absorption measurements unveil the ultrafast picosecond electron and energy transfer from 2D to 3D perovskites. Furthermore, it is demonstrated that the positioning of fluorination on the PEA cations effectively regulates the efficiency of charge and energy transfer within the heterostructures. These insightful findings shed light on the underlying carrier transport mechanism and underscore the critical role of cation fluorination in optimizing carrier transport within 2D/3D perovskite heterostructure-based devices.

Ultrafast Dynamics, Optical Nonlinearities, and Chemical Sensing Application of Free-Standing Porous Silicon-Based Optical Microcavities

The present work demonstrates the ultrafast carrier dynamics and third-order nonlinear optical properties of electrochemically fabricated free-standing porous silicon (FS-PSi)-based optical microcavities via femtosecond transient absorption spectroscopy (TAS) and single-beam Z-scan techniques, respectively. The TAS (pump: 400 nm, probe: 430-780 nm, ∼70 fs, 1 kHz) decay dynamics are dominated by the photoinduced absorption (PIA, lifetime range: 4.7-156 ps) as well as photoinduced bleaching (PIB, 4.3-324 ps) for the cavity mode (λc) and the band edges. A fascinating switching behavior from the PIB (-ve) to the PIA (+ve) has been observed in the cavity mode, which shows the potential in ultrafast switching applications. The third-order optical nonlinearities revealed an enhanced two-photon absorption coefficient (β) in the order of 10-10 mW-1 along with the nonlinear refractive index (n2) in the range of 10-17 m2 W-1. Furthermore, a real-time sensing application of such FS-PSi microcavities has been demonstrated for detecting organic solvents by simultaneously monitoring the kinetics in reflection and transmission mode.

Enhancing the Potential of Fused Heterocycle-Based Triarylhydrazone Photoswitches

Triarylhydrazones represent an attractive class of photochromic compounds offering many interesting features including high molar absorptivity, good addressability, and extraordinary thermal stability. In addition, unlike most other hydrazone-based photoswitches, they effectively absorb light above 365 nm. However, previously prepared triaryhydrazones suffer from low quantum yields of the Z→E photoisomerization. Here, we have designed a new subclass of naphthoyl-benzothiazole hydrazones that balance the most beneficial features of previously reported naphthoyl-quinoline and benzoyl-pyridine triarylhydrazones. These preserve the attractive absorption characteristics, exhibit higher thermal stability of the metastable form than the former and enhance the rate of the Z→E photoisomerization compared to the later, as a result of the weakening of the intramolecular hydrogen bonding between the hydrazone hydrogen and the benzothiazole moiety. Introducing the benzothiazole motif extends the tunability of the photochromic behaviour of hydrazone-based switches.

Photophysical Study on the Effect of the External Potential on NiO-Based Photocathodes

In the present study, we investigate the effects of the applied external potential on a dye-sensitized NiO photocathode by time-resolved photoluminescence and femtosecond transient absorption spectroscopy under operating conditions. Instead of the anticipated acceleration of photoinduced hole injection from dye into NiO at a more negative applied potential, we observe that both hole injection and charge recombination are slowed down. We cautiously assign this effect to a variation in OH- ion concentration in the inner Helmholtz plane of the electrochemical double layer with applied potential, warranting further investigation for the realization of efficient solar fuel devices.

Cyclic Azobenzene-BODIPY Hybrids

Cyclic azobenzene-BODIPY hybrids were synthesized via cyclization by 1) acid-catalysed condensation of azobenzene-bridged dipyrroles with 3,5-di-tert-butylbenzaldehyde, 2) oxidation with DDQ, and 3) metalation with BF3  ⋅ Et2 O. The structures of many cyclic hybrids have been confirmed by single crystal X-ray analysis. The absorption spectra of the hybrids reveal the effective cyclic conjugation. The ultrafast measurements reveal that the photoexcited decays of these cyclic hybrids depend upon the ring size and connectivity.

Direct Imaging of Carrier Funneling in a Dielectric Engineered 2D Semiconductor

In atomically thin transition-metal dichalcogenides (TMDCs), the environmental sensitivity of the strong Coulomb interaction offers promising approaches to create spatially varying potential landscapes in the same continuous material by tuning its dielectric environment. Thus, allowing for control of transport. However, a scalable and CMOS-compatible method for achieving this is required to harness these effects in practical applications. In addition, because of their ultrashort lifetime, observing the spatiotemporal dynamics of carriers in monolayer TMDCs, on the relevant time scale, is challenging. Here, we pattern and deposit a thin film of hafnium oxide (HfO2) via atomic layer deposition (ALD) on top of a monolayer of WSe2. This allows for the engineering of the dielectric environment of the monolayer and design of heterostructures with nanoscale spatial resolution via a highly scalable postsynthesis methodology. We then directly image the transport of photoexcitations in the monolayer with 50 fs time resolution and few-nanometer spatial precision, using a pump probe microscopy technique. We observe the unidirectional funneling of charge carriers, from the unpatterned to the patterned areas, over more than 50 nm in the first 20 ps with velocities of over 2 × 103 m/s at room temperature. These results demonstrate the possibilities offered by dielectric engineering via ALD patterning, allowing for arbitrary spatial patterns that define the potential landscape and allow for control of the transport of excitations in atomically thin materials. This work also shows the power of the transient absorption methodology to image the motion of photoexcited states in complex potential landscapes on ultrafast time scales.

Impact of Surface Trap States on Electron and Energy Transfer in CdSe Quantum Dots Studied by Femtosecond Transient Absorption Spectroscopy

The presence of surface trap states (STSs) is one of the key factors to affect the electronic and optical properties of quantum dots (QDs), however, the exact mechanism of how STSs influence QDs remains unclear. Herein, we demonstrated the impact of STSs on electron transfer in CdSe QDs and triplet-triplet energy transfer (TTET) from CdSe to surface acceptor using femtosecond transient absorption spectroscopy. Three types of colloidal CdSe QDs, each containing various degrees of STSs as evidenced by photoluminescence and X-ray photoelectron spectroscopy, were employed. Time-resolved emission and transient absorption spectra revealed that STSs can suppress band-edge emission effectively, resulting in a remarkable decrease in the lifetime of photoelectrons in QDs from 17.1 ns to 4.9 ns. Moreover, the investigation of TTET process revealed that STSs can suppress the generation of triplet exciton and effectively inhibit band-edge emission, leading to a significant decrease in TTET from CdSe QDs to the surface acceptor. This work presented evidence for STSs influence in shaping the optoelectronic properties of QDs, making it a valuable point of reference for understanding and manipulating STSs in diverse QDs-based optoelectronic applications involving electron and energy transfer.

Oxidation-state sensitive light-induced dynamics of Ruthenium-4H-Imidazole complexes

Oxidized molecular states are key intermediates in photo-induced redox reactions, e. g., intermolecular charge transfer between photosensitizer and catalyst in photoredox catalysis. The stability and longevity of the oxidized photosensitizer is an important factor in optimizing the respective light-driven reaction pathways. In this work the oxidized states of ruthenium(II)-4H-imidazole dyes are studied. The ruthenium complexes constitute benchmark photosensitizers in solar energy interconversion processes with exceptional chemical stability, strong visible light absorption, and favourable redox properties. To rationalize the light-induced reaction in the oxidized ruthenium(III) systems, we combine UV-vis absorption, resonance Raman, and transient absorption spectroelectrochemistry (SEC) with time-dependent density functional theory (TDDFT) calculations. Three complexes are compared, which vary with respect to their coordination environment, i. e., combining an 4H-imidazole with either 2,2'-bipyridine (bpy) or 2,2';6'2"-terpyridine (tpy) coligands, and chloride or isothiocyanate ligands. While all oxidized complexes have similar steady state absorption properties, their excited state kinetics differ significantly; the study thus opens the doorway to study the light-driven reactivity of oxidized molecular intermediates in intermolecular charge transfer cascades.

Elucidating the Excited State Behavior of Pyridyl Pyridinium Systems via Computational and Transient Absorption Studies of Tetrahedral Multichromophoric Arrays and their Model Compounds

The tetrahedral shape-persistent molecule 14+ , containing four identical pyridyl pyridinium units connected via a sp3 hybridized carbon atom, has been investigated in detail by means of steady-state and time resolved spectroscopy. Remarkable photophysical properties are observed, particularly in comparison with protonated and methylated analogues (1H4 8+ , 1Me4 8+ ), which exhibit substantially shorter excited state lifetimes and lower emission quantum yields. Theoretical studies have rationalized the behavior of the tetrameric molecules relative to the monomers, with DFT and TD-DFT calculations corroborating steady-state (absorption and emission) and transient absorption spectra. The behavior of the monomeric compounds (each consisting in one of the four identical subunits of the tetramers, i. e., 2+ , 2H2+ and 2Me2+ ) considerably differs from that of the tetramers, indicating a strong electronic interaction between the subunits in the tetrameric species, likely promoted by the homoconjugation through the connecting sp3  C atom. 2+ is characterized by a peculiar S1 -S2 excited state inversion, whereas the short-lived emitting S1 state of 2H2+ and 2Me2+ exhibits a partial charge-transfer character, as substantiated by spectro-electrochemical studies. Among the six investigated systems, only 14+ is a sizeable luminophore (Φem =0.15), which is related to the peculiar features of its singlet state.

Time-Resolved Spectroelectrochemical Dynamics of Carotenoid 8'-apo-β-Carotenal

This work examines the influence of applied external voltage in bulk electrolysis on the excited-state properties of 8'-apo-β-carotenal in acetonitrile by steady-state and ultrafast time-resolved absorption spectroscopy. The data collected under bulk electrolysis were compared with those taken without applied voltage. The steady-state measurements showed that although intensity of the S0 -S2 absorption band varies with the applied voltage, the spectral position remain nearly constant. Comparison of transient absorption spectra shows that the magnitude of the ICT-like band decreases during the experiment under applied voltage condition, and is associated with a prolongation of the S1 /ICT-like lifetime from 8 ps to 13 ps. Furthermore, switching off the applied voltage resulted in returning to no-voltage data within about 30 min. Our results show that the amplitude of the signal associated with the ICT state can be tuned by applying an external voltage.

The Role of Polaronic States on the Spin Dynamics in Solution-Processed Two-Dimensional Layered Perovskite with Different Layer Thickness

2D lead halide perovskites (LHPs) show strong excitonic and spin-orbit coupling effects, generating a facile spin injection. Besides, they possess a polaron character due to the soft crystal lattice, which can prolong the spin lifetime, making them favorable materials for spintronic applications. Here, the spin dynamics of 2D PEA2 PbI4 (MAPbI3 )n -l thin films with different layers by temperature- and pump fluence-dependent circularly polarization-resolved transient absorption (TA) measurements is studied. These results indicate that the spin depolarization mechanism is gradually converted from the Maialle-Silva-Sham (MSS) mechanism to the polaronic states protection mechanism with the layer number increasing from = 1 to 3, which is determined by the interplay between the strength of Coulomb exchange interaction and the strength of polaronic effect. While for ≥ 4, the Elliot-Yafet (EY) impurities mechanism is proposed, in which the formed polaronic states with free charge carriers no longer play the protective role.

Excited-State Dynamics Leading Either to Triplet Formation or Coordinative Expansion following Photolysis of Cu(II)-Porphyrins: A DFT, TD-DFT, Luminescence and Femtosecond Time-Resolved Absorbance Study

The photophysical properties of Cu(II) complexes with 5,10,15,20-meso-tetrakis(phenyl)porphyrin and 5,10,15,20-meso-tetrakis(N-methylpyridium-4-yl)porphyrin are examined via the luminescence and femtosecond time-resolved absorbance methods, respectively. These studies are supported by DFT and TD-DFT calculations, which highlight the important role played by ligand-to-metal charge-transfer states in directing the system toward either intersystem crossing to the triplet hypersurface or coordinative expansion to a five-coordinate quasi-stable intermediate. The latter processes occur when the porphyrin is photolyzed in the presence of suitably located Lewis bases. Femtosecond time-resolved absorbance measurements of Cu(II)-5,10,15,20-meso-tetrakis(N-methylpyridium-4-yl)porphyrin confirm that the coordinative expansion in water occurs in approximately 700 fs, while crossing to the triplet hypersurface takes approximately 140 fs in the same solvent. These processes are mutually exclusive, although both can occur simultaneously depending on the environment of the porphyrin. The ratio of the two processes depends on the relative orientation of the Lewis base with respect to the copper atom at the time of excitation. As a consequence, copper porphyrins such as these are excellent probes in the environment of the porphyrin and can be used to identify the location of the porphyrin when interacting with DNA fragments.

Unveiling Charge-Transfer Dynamics at Singlet Fission Layer/Hybrid Perovskite Interface

Singlet fission (SF) materials have been applied in various types of solar cells to pursue higher power conversion efficiency (PCE) beyond the Shockley-Queisser (SQ) limit. SF implementation in perovskite solar cells has not been successfully realized yet due to the insufficient understanding of the SF/perovskite heterojunctions. In this work, we attempt to elucidate the charge dynamics of an SF/perovskite system by incorporating a well-known SF molecule, TIPS-pentacene, and a triple-cation perovskite Cs0.05(FA0.85MA0.15)0.95PbI2.55Br0.45, owing to their well-matched energy structures. The transient absorption spectra and kinetic fitting plots suggest an electron-transfer process from the triplet state of TIPS-pentacene to perovskite in the picosecond regime, which increases the carrier density by 20% in the perovskite layer. This work confirms the existence of an electron-transfer process between the SF material and perovskite, providing a pathway to SF-enhanced perovskite solar cells.

Ultrafast Transient Absorption Spectra and Kinetics of Rod and Cone Visual Pigments

Rods and cones are the photoreceptor cells containing the visual pigment proteins that initiate visual phototransduction following the absorption of a photon. Photon absorption induces the photochemical transformation of a visual pigment, which results in the sequential formation of distinct photo-intermediate species on the femtosecond to millisecond timescales, whereupon a visual electrical signal is generated and transmitted to the brain. Time-resolved spectroscopic studies of the rod and cone photo-intermediaries enable the detailed understanding of initial events in vision, namely the key differences that underlie the functionally distinct scotopic (rod) and photopic (cone) visual systems. In this paper, we review our recent ultrafast (picoseconds to milliseconds) transient absorption studies of rod and cone visual pigments with a detailed comparison of the transient molecular spectra and kinetics of their respective photo-intermediaries. Key results include the characterization of the porphyropsin (carp fish rhodopsin) and human green-cone opsin photobleaching sequences, which show significant spectral and kinetic differences when compared against that of bovine rhodopsin. These results altogether reveal a rather strong interplay between the visual pigment structure and its corresponding photobleaching sequence, and relevant outstanding questions that will be further investigated through a forthcoming study of the human blue-cone visual pigment are discussed.

Excited-State Dynamics in All-Polymer Blends with Polymerized Small-Molecule Acceptors

Polymerizing small-molecular acceptors (SMAs) is a promising route to construct high performance polymer acceptors of all-polymer solar cells (all-PSCs). After SMA polymerization, the microstructure of molecular packing is largely modified, which is essential in regulating the excited-state dynamics during the photon-to-current conversion. Nevertheless, the relationship between the molecular packing and excited-state dynamics in polymerized SMAs (PSMAs) remains poorly understood. Herein, the excited-state dynamics and molecular packing are investigated in the corresponding PSMA and SMA utilizing a combination of experimental and theoretical methods. This study finds that the charge separation from intra-moiety delocalized states (i-DEs) is much faster in blends with PSMAs, but the loosed π-π molecular packing suppresses the excitation conversion from the local excitation (LE) to the i-DE, leading to additional radiative losses from LEs. Moreover, the increased aggregations of PSMA in the blends decrease donor: acceptor interfaces, which reduces triplet losses from the bimolecular charge recombination. These findings suggest that excited-state dynamics may be manipulated by the molecular packing in blends with PSMAs to further optimize the performance of all-PSCs.

Photocycle alteration and increased enzymatic activity in genetically modified photoactivated adenylate cyclase OaPAC

Photoactivated adenylate cyclases (PACs) are light activated enzymes that combine blue light sensing capacity with the ability to convert ATP to cAMP and pyrophosphate (PPi) in a light-dependent manner. In most of the known PACs blue light regulation is provided by a blue light sensing domain using flavin which undergoes a structural reorganization after blue-light absorption. This minor structural change then is translated toward the C-terminal of the protein, inducing a larger conformational change that results in the ATP conversion to cAMP. As cAMP is a key second messenger in numerous signal transduction pathways regulating various cellular functions, PACs are of great interest in optogenetic studies. The optimal optogenetic device must be "silent" in the dark and highly responsive upon light illumination. PAC from Oscillatoria acuminata is a very good candidate as its basal activity is very small in the dark and the conversion rates increase 20-fold upon light illumination. We studied the effect of replacing D67 to N, in the blue light using flavin domain. This mutation was found to accelerate the primary electron transfer process in the photosensing domain of the protein, as has been predicted. Furthermore, it resulted in a longer lived signaling state, which was formed with a lower quantum yield. Our studies show that the overall effects of the D67N mutation lead to a slightly higher conversion of ATP to cAMP, which points in the direction that by fine tuning the kinetic properties more responsive PACs and optogenetic devices can be generated.

Influence of Al2O3 Overlayers on Intermolecular Interactions between Metal Oxide Bound Molecules

Intermolecular interactions on inorganic substrates can have a critical impact on the electrochemical and photophysical properties of the materials and subsequent performance in hybrid electronics. Critical to the intentional formation or inhibition of these processes is controlling interactions between molecules on a surface. In this report, we investigated the impact of surface loading and atomic-layer-deposited Al₂O₃ overlayers on the intermolecular interactions of a ZrO₂-bound anthracene derivative as probed by the photophysical properties of the interface. While surface loading density had no impact on the absorption spectra of the films, there was an increase in excimer features with surface loading as observed by both emission and transient absorption. The addition of ALD overlayers of Al₂O₃ resulted in a decrease in excimer formation, but the emission and transient absorption spectra were still dominated by excimer features. These results suggest that ALD may provide a post-surface loading means of influencing such intermolecular interactions.

Trion Formation Resolves Observed Peak Shifts in the Optical Spectra of Transition-Metal Dichalcogenides

Monolayer transition-metal dichalcogenides (ML-TMDs) have the potential to unlock novel photonic and chemical technologies if their optoelectronic properties can be understood and controlled. Yet, recent work has offered contradictory explanations for how TMD absorption spectra change with carrier concentration, fluence, and time. Here, we test our hypothesis that the large broadening and shifting of the strong band-edge features observed in optical spectra arise from the formation of negative trions. We do this by fitting an ab initio based, many-body model to our experimental electrochemical data. Our approach provides an excellent, global description of the potential-dependent linear absorption data. We further leverage our model to demonstrate that trion formation explains the nonmonotonic potential dependence of the transient absorption spectra, including through photoinduced derivative line shapes for the trion peak. Our results motivate the continued development of theoretical methods to describe cutting-edge experiments in a physically transparent way.

Investigation of Excited-State Intramolecular Proton Transfer and Structural Dynamics in Bis-Benzimidazole Derivative (BBM)

The bis-benzimidazole derivative (BBM) molecule, consisting of two 2-(2'-hydroxyphenyl) benzimidazole (HBI) halves, has been synthesized and successfully utilized as a ratiometric fluorescence sensor for the sensitive detection of Cu²⁺ based on enol-keto excited-state intramolecular proton transfer (ESIPT). In this study, we strategically implement femtosecond stimulated Raman spectroscopy and several time-resolved electronic spectroscopies, aided by quantum chemical calculations to investigate the detailed primary photodynamics of the BBM molecule. The results demonstrate that the ESIPT from BBM-enol* to BBM-keto* was observed in only one of the HBI halves with a time constant of 300 fs; after that, the rotation of the dihedral angle between the two HBI halves generated a planarized BBM-keto* isomer in 3 ps, leading to a dynamic redshift of BBM-keto* emission.

Broadband Tunable Optical Gain from Ecofriendly Semiconductor Quantum Dots with Near-Half-Exciton Threshold

Optical gain in solution-processable quantum dots (QDs) has attracted intense interest toward next-generation optoelectronics; however, the development of optical gain in heavy-metal-free QDs remains challenging. Herein, we reveal that the ZnSe_1-xTe_x-based QDs show excellent optical gain covering the violet to near-red regime. A new gain mechanism is established in the alloy QDs, which promotes a theoretically threshold-less optical gain thanks to the ultrafast carrier localization and suppression of ground-state absorption by the Te-derived isoelectronic state. Further, we disclose that the hot-carrier trapping represents the main culprit to exacerbate the gain performance. With the increase of Te-to-Se ratio, a sub-band-gap photoinduced absorption (PA) appears and extinguishes the optical gain. To overcome this issue, we modulate the inner ZnSe shell thickness, and the gain is recovered by reducing the overlap between the gain and PA regions in the Te-rich QDs. Our finding represents a significant step toward sustainable QD-based optoelectronics.

Femtosecond Spectroscopy on a Dibenzophenazine-Cored Macrocycle Exhibiting Thermally Activated Delayed Fluorescence

The photophysics of a thermally activated delayed fluorescence (TADF) emitting macrocycle consisting of two dibenzo[a,j]phenazine acceptor moieties bridged by two N,N,N',N'-tetraphenylene-1,4-diamine donor units was scrutinized in solution by steady-state and time-resolved spectroscopy. The fluorescence lifetime of the compound proved to be strongly solvent-dependent. It ranges from 6.3 ns in cyclohexane to 34 ps in dimethyl sulfoxide. In polar solvents the fluorescence decay is predominantly due to internal conversion. In non-polar ones radiative decay and intersystem crossing contribute. Contrary to the behaviour in polymer matrices (S. Izumi et al., J. Am. Chem. Soc. 2020, 142, 1482) the excited state decay is not predominantly due to prompt and delayed fluorescence. The solvent-dependent behaviour is analyzed with the aid of quantum chemical computations.

Ultrafast Electron Transfer Dynamics of Organic Polymer Nanoparticles with Graphene Oxide

We prepared organic polymer poly-3-hexylthiophene (p3ht) nanoparticles (NPs) and graphene oxide (GO)/reduced graphene oxide (RGO) composites p3ht NPs-GO/RGO by using the reprecipitation method. We demonstrated that GO/RGO could improve the ordering and planarity of p3ht chains as well as the formation of p3ht NPs, and confirmed the effects of GO/RGO on the fluorescence and carrier transport dynamics of p3ht NPs by using femtosecond fluorescence upconversion and transient absorption (TA) techniques. Ultrafast electron transfer (∼1 ps) between GO/RGO and p3ht NPs quenched the fluorescence of p3ht NPs, indicating excellent properties of p3ht NPs-GO/RGO as the charge transfer complexes. Efficient electron transfer may promote the applications of p3ht NPs-GO/RGO composites in organic polymer solar cells and photocatalysis. Moreover, RGO had stronger interfacial interactions and more matched conduction band energy levels with p3ht NPs than GO did, which implied that p3ht NPs-RGO might have greater application values than p3ht NPs-GO.

Large Exciton Polaron Formation in 2D Hybrid Perovskites via Time-Resolved Photoluminescence

We find evidence for the formation and relaxation of large exciton polarons in 2D organic-inorganic hybrid perovskites. Using ps-scale time-resolved photoluminescence within the phenethylammonium lead iodide family of compounds, we identify a red shifting of emission that we associate with exciton polaron formation time scales of 3-10 ps. Atomic substitutions of the phenethylammonium cation allow local control over the structure of the inorganic lattice, and we show that the structural differences among materials strongly influence the exciton polaron relaxation process, revealing a polaron binding energy that grows larger (up to 15 meV) in more strongly distorted compounds.

The Other Dimension-Tuning Hole Extraction via Nanorod Width

Solar-to-hydrogen generation is a promising approach to generate clean and renewable fuel. Nanohybrid structures such as CdSe@CdS-Pt nanorods were found favorable for this task (attaining 100% photon-to-hydrogen production efficiency); yet the rods cannot support overall water splitting. The key limitation seems to be the rate of hole extraction from the semiconductor, jeopardizing both activity and stability. It is suggested that hole extraction might be improved via tuning the rod's dimensions, specifically the width of the CdS shell around the CdSe seed in which the holes reside. In this contribution, we successfully attain atomic-scale control over the width of CdSe@CdS nanorods, which enables us to verify this hypothesis and explore the intricate influence of shell diameter over hole quenching and photocatalytic activity towards H₂ production. A non-monotonic effect of the rod's diameter is revealed, and the underlying mechanism for this observation is discussed, alongside implications towards the future design of nanoscale photocatalysts.

Two-photon IR pumped UV-Vis transient absorption spectroscopy of Dirac fermions in the topological insulator Bi2Se3

It is often taken for granted that in pump-probe experiments on the topological insulator (TI) Bi₂Se₃using IR pumping with a commercial Ti:sapphire laser [∼800 nm (1.55 eV photon energy)], the electrons are excited in the one-photon absorption regime, even when pumped with absorbed fluences in the mJ cm^-2range. Here, using UV-Vis transient absorption (TA) spectroscopy, we show that even at low-power Infrared (IR) pumping with absorbed fluences in theμJ cm^-2range, the TA spectra of the TI Bi₂Se₃extend across a part of the UV and the entire visible region. This observation suggests unambiguously that the two-photon pumping regime accompanies the usual one-photon pumping regime even at low laser powers applied. We attribute the high efficiency of two-photon pumping to the giant nonlinearity of Dirac fermions in the Dirac surface states (SS). On the contrary, one-photon pumping is associated with the excitation of bound valence electrons in the bulk into the conduction band. Two mechanisms of absorption bleaching were also revealed since they manifest themselves in different spectral regions of probing and cause the appearance of three different relaxation dynamics. These two mechanisms were attributed to the filling of the phase-space in the Dirac SS and bulk states, followed by the corresponding Pauli blocking.

Excimer Formation in the Non-Van-Der-Waals 2D Semiconductor Bi2 O2 Se

The layered semiconductor Bi₂ O₂ Se is a promising new-type 2D material that holds layered structure via electrostatic forces instead of van der Waals (vdW) attractions. Aside from the huge success in device performance, the non-vdW nature in Bi₂ O₂ Se with a built-in interlayer electric field has also provided an appealing platform for investigating unique photoexcited carrier dynamics. Here, experimental evidence for the observation of excimers in multilayer Bi₂ O₂ Se nanosheets via transient absorption spectroscopy is presented. It is found that the excimer formation is the primary decay pathway of photoexcited excitons and three-stage excimer dynamics with corresponding time scales are established. Excitation-fluence-dependent excimer dynamics further suggest that the excimer is diffusive and its formation can be simply described as excitons relaxed to an excimer geometry. This work indicates the outstanding promise of unique excitonic processes in Bi₂ O₂ Se, which may motivate novel device designs.

Perylene Diimide-Fused Dithiophenepyrroles with Different End Groups as Acceptors for Organic Photovoltaics

In this study, we synthesized four new A-DA'D-A acceptors (where A and D represent acceptor and donor chemical units) incorporating perylene diimide units (A') as their core structures and presenting various modes of halogenation and substitution of the functional groups at their end groups (A). In these acceptors, by fusing dithiophenepyrrole (DTP) moieties (D) to the helical perylene diimide dimer (hPDI) to form fused-hPDI (FhPDI) cores, we could increase the D/A' oscillator strength in the cores and, thus, the intensity of intramolecular charge transfer (ICT), thereby enhancing the intensity of the absorption bands. With four different end group units─IC2F, IC2Cl, IO2F, and IO2Cl─tested, each of these acceptor molecules exhibited different optical characteristics. Among all of these systems, the organic photovoltaic device incorporating the polymer PCE10 blended with the acceptor FhPDI-IC2F (1:1.1 wt %) had the highest power conversion efficiency (PCE) of 9.0%; the optimal PCEs of PCE10:FhPDI-IO2F, PCE10:FhPDI-IO2Cl, and PCE10:FhPDI-IC2Cl (1:1.1 wt %) devices were 5.2, 4.7, and 7.7%, respectively. The relatively high PCE of the PCE10:FhPDI-IC2F device resulted primarily from the higher absorption coefficients of the FhPDI-IC2F acceptor, lower energy loss, and more efficient charge transfer; the FhPDI-IC2F system experienced a lower degree of geminate recombination─as a result of improved delocalization of π-electrons along the acceptor unit─relative to that of the other three acceptors systems. Thus, altering the end groups of multichromophoric PDI units can increase the PCEs of devices incorporating PDI-derived materials and might also be a new pathway for the creation of other valuable fused-ring derivatives.

Low-Frequency Oscillations in Optical Measurements of Metal-Nanoparticle Vibrations

Time-resolved optical measurements of vibrating metal nanoparticles have been used extensively to probe the ultrafast mechanical properties of the nanoparticles and of the surrounding liquid, but nearly all investigations so far have been limited to the linear regime. Here, we report the observation of a low-frequency oscillating signal in transient-absorption measurements of nanoparticles with octahedral gold cores and cubic silver shells; the signal appears at the difference of two mechanical vibrational frequencies in the particles, suggesting a nonlinear mixing process. We tentatively attribute this proposed mixing to a nonlinear coupling between a vibrational mode of the nanoparticle and its optical-frequency plasmon resonance. The optimization of this nonlinear transduction may enable high-efficiency opto-mechanical frequency mixing in the GHz-THz frequency regime.

Automatized protocol and interface to simulate QM/MM time-resolved transient absorption at TD-DFT level with COBRAMM

We present a series of new implementations that we recently introduced in COBRAMM, the open-source academic software developed in our group. The goal of these implementations is to offer an automatized workflow and interface to simulate time-resolved transient absorption (TA) spectra of medium-to-big chromophore embedded in a complex environment. Therefore, the excited states absorption and the stimulated emission are simulated along nonadiabatic dynamics performed with trajectory surface hopping. The possibility of treating systems from medium to big size is given by the use of time-dependent density functional theory (TD-DFT) and the presence of the environment is taken into account employing a hybrid quantum mechanics/molecular mechanics (QM/MM) scheme. The full implementation includes a series of auxiliary scripts to properly setup the QM/MM system, the calculation of the wavefunction overlap along the dynamics for the propagation, the evaluation of the transition dipole moment at linear response TD-DFT level, and scripts to setup, run and analyze the TA from an ensemble of trajectories. Altogether, we believe that our implementation will open the door to the easily simulate the time-resolved TA of systems so far computationally inaccessible.

Synthesis and Characterizations of 5,5'-Bibenzo[rst]pentaphene with Axial Chirality and Symmetry-Breaking Charge Transfer

Exploration of novel biaryls consisting of two polycyclic aromatic hydrocarbon (PAH) units can be an important strategy toward further developments of organic materials with unique properties. In this study, 5,5'-bibenzo[rst]pentaphene (BBPP) with two benzo[rst]pentaphene (BPP) units is synthesized in an efficient and versatile approach, and its structure is unambiguously elucidated by X-ray crystallography. BBPP exhibits axial chirality, and the (M)- and (P)-enantiomers are resolved by chiral high-performance liquid chromatography and studied by circular dichroism spectroscopy. These enantiomers have a relatively high isomerization barrier of 43.6 kcal mol^-1 calculated by density functional theory. The monomer BPP and dimer BBPP are characterized by UV-vis absorption and fluorescence spectroscopy, cyclic voltammetry, and femtosecond transient absorption spectroscopy. The results indicate that both BPP and BBPP fluoresce from a formally dark S₁ electronic state that is enabled by Herzberg-Teller intensity borrowing from a neighboring bright S₂ state. While BPP exhibits a relatively low photoluminescence quantum yield (PLQY), BBPP exhibits a significantly enhanced PLQY due to a greater S₂ intensity borrowing. Moreover, symmetry-breaking charge transfer in BBPP is demonstrated by spectroscopic investigations in solvents of different polarity. This suggests high potential for singlet fission in such π-extended biaryls through appropriate molecular design.

Engineering Relaxation-Paths of C-Exciton for Constructing Band Nesting Bypass in WS2 Monolayer

Transition-metal dichalcogenides exhibit strong photon absorption characteristics in the band nesting region (denoted as C-exciton) due to intrinsic van Hove singularities despite being atomically thin. However, because of unique parallel band structure and ineluctably unfavorable recombination process, only a small fraction of the hot carriers from C-excitons are converted into optically active band-edge excitons via inherent relaxation-paths. The resultant photoluminescence quantum yield (PLQY) is severely suppressed for the resonant excitation of C-exciton. To overcome this limitation, we have designed double type-I band alignments to construct a band nesting bypass in a monolayer WS₂/CdS quantum dot heterostructure for cooling the C-excitons. Transient optical measurements confirmed that the hot carriers from the C-excitons were effectively transferred from WS₂ to CdS with an efficiency of 50% and subsequently back to the WS₂ band-edge to form A-excitons over an ultrafast subpicosecond time scale, accompanied by a record high PLQY of ∼11.1% for near-resonance C-exciton excitation.

Janus Monolayers for Ultrafast and Directional Charge Transfer in Transition Metal Dichalcogenide Heterostructures

Charge transfer properties of van der Waals heterostructures formed by Janus and regular transition metal dichalcogenide monolayers are studied by time-resolved pump-probe measurements and photoluminescence spectroscopy. Measurements of electron and hole transfer in three heterostructures with atomic layer sequences of S-W-Se/S-W-S, Se-W-S/S-W-S, and S-W-Se/Se-W-Se reveal that charge transfer from regular to Janus monolayers is ultrafast regardless of the direction of the built-in electric field of the Janus monolayer (Janus field). However, the charge transfer from Janus to regular layers is directional and controlled by the Janus field. When the current direction is along the field, the charge transfer is ultrafast and efficient, while the field blocks the charge transfer with an opposite charge current direction. The transferred carriers form interlayer excitons with extended lifetimes compared to the intralayer excitons. The demonstrated ultrafast and directional charge transfer between Janus and regular TMD layers shows that the Janus structures can be used to make 2D heterostructures with efficient and directional charge transfer properties.

Picoseconds-Limited Exciton Recombination in Metal-Organic Chalcogenides Hybrid Quantum Wells

Metal-organic species can be designed to self-assemble in large-scale, atomically defined, supramolecular architectures. A particular example is hybrid quantum wells, where inorganic two-dimensional (2D) planes are separated by organic ligands. The ligands effectively form an intralayer confinement for charge carriers resulting in a 2D electronic structure, even in multilayered assemblies. Air-stable layered transition metal organic chalcogenides have recently been found to host tightly bound 2D excitons with strong optical anisotropy in a bulk matrix. Here, we investigate the excited carrier dynamics in the prototypical metal-organic chalcogenide [AgSePh]_∞, disentangling three excitonic resonances by low temperature transient absorption spectroscopy. Our analysis suggests a complex relaxation cascade comprising ultrafast screening and renormalization, interexciton relaxation, and self-trapping of excitons within a few picoseconds (ps). The ps-decay provided by the self-trapping mechanism may be leveraged to unlock the material's potential for ultrafast optoelectronic applications.

Optical Properties of Few-Layer Ti3CN MXene: From Experimental Observations to Theoretical Calculations

Despite the emerging interest in research and development of Ti₃CN MXene nanosheet (NS)-based optoelectronic devices, there is still a lack of in-depth studies of the underlying photophysical processes, like carrier relaxation dynamics and nonlinear photon absorption, operating in such devices, hindering their further and precise design. In this paper, we attempt to remedy the situation by fabricating few-layer Ti₃CN NSs via combining selective etching and molecular intercalation and by investigating the carrier relaxation possesses and broadband nonlinear optical responses via transient absorption and Z-scan techniques. These results are complemented by first-principle theoretical analyses of the optical properties. Both saturable absorption and reverse saturable absorption phenomena are observed due to multiphoton absorption effects. The analysis of these results adds to the understanding of the basic photophysical processes, which is anticipated to be beneficial for the further design of MXene-based devices.

Detection of Aqueous Solvated Electrons Produced by Photoemission from Solids Using Transient Absorption Measurements

Solvated electrons in water have long been of interest to chemists. While readily produced using intense multiphoton excitation of water and/or irradiation with high-energy particles, the possible role of solvated electrons in electrochemical and photoelectrochemical reactions at electrodes has been controversial. Recent studies showed that excitation of electrons to the conduction band of diamond leads to barrier-free emission of electrons into water. While these electrons can be inferred from the reactions they induce, direct detection by transient absorption measurements provides more direct evidence. Here, we present studies demonstrating direct detection of solvated electrons produced at diamond electrode surfaces and the influence of electrochemical potential and solution-phase electron scavengers. We further present a more detailed analysis of experimental conditions needed to detect solvated electrons emitted from diamond and other solid materials through transient optical absorption measurements.

A polarization scheme that resolves cross-peaks with transient absorption and eliminates diagonal peaks in 2D spectroscopy

Two-dimensional (2D) optical spectroscopy contains cross-peaks that are helpful features for determining molecular structure and monitoring energy transfer, but they can be difficult to resolve from the much more intense diagonal peaks. Transient absorption (TA) spectra contain transitions similar to cross-peaks in 2D spectroscopy, but in most cases they are obscured by the bleach and stimulated emission peaks. We report a polarization scheme, <0°,0°,+θ₂(t₂),-θ₂(t₂)>, that can be easily implemented in the pump-probe beam geometry, used most frequently in 2D and TA spectroscopy. This scheme removes the diagonal peaks in 2D spectroscopies and the intense bleach/stimulated emission peaks in TA spectroscopies, thereby resolving the cross-peak features. At zero pump-probe delay, θ₂ = 60° destructively interferes two Feynman paths, eliminating all signals generated by field interactions with four parallel transition dipoles, and the intense diagonal and bleach/stimulated emission peaks. At later delay times, θ₂(t₂) is adjusted to compensate for anisotropy caused by rotational diffusion. When implemented with TA spectroscopy or microscopy, the pump-probe spectrum is dominated by the cross-peak features. The local oscillator is also attenuated, which enhances the signal two times. This overlooked polarization scheme reduces spectral congestion by eliminating diagonal peaks in 2D spectra and enables TA spectroscopy to measure similar information given by cross-peaks in 2D spectroscopy.

Excellent Multiphoton Excitation Fluorescence with Large Multiphoton Absorption Cross Sections of Arginine-Modified Gold Nanoclusters for Bioimaging

Fluorescent gold nanoclusters (Au NCs) with excellent one-photon and multiphoton properties have been demonstrated as promising candidates in many application fields. However, small multiphoton absorption (MPA) cross sections and weak multiphoton excitation (MPE) fluorescence impede their practical applications under near-infrared (NIR) excitation for biological imaging. Here, we report the regulated one-photon and multiphoton properties and mechanisms of arginine-stabilized 6-aza-2-thiothymine Au NCs (Arg/ATT-Au NCs) and the applications for MPE fluorescence imaging. The introduction of arginine into the capping layer of ATT-Au NCs significantly modifies the electronic structure, the absorption cross sections, and the relaxation dynamics of the lowest excited state, drastically reducing the nonradiative relaxation, suppressing the blinking, and greatly enhancing the fluorescence. Besides the improved one-photon properties, Arg/ATT-Au NCs demonstrate remarkable MPE fluorescence with a large MPA cross section. The two-photon (λ_ex = 850 nm), three-photon (λ_ex = 1400 nm), and four-photon (λ_ex = 1700 nm) absorption cross sections have been determined to be 6.1 × 10^-47 cm⁴ s¹ photon^-1, 1.5 × 10^-78 cm⁶ s² photon^-2, and 5.5 × 10^-108 cm⁸ s³ photon^-3, respectively, much higher than those of conventional organic compounds and previously reported Au NCs. Moreover, Arg/ATT-Au NCs have been successfully applied in two-photon and three-photon excitation fluorescence imaging of living cells with NIR excitation. The manifold advantages of small size, high quantum yield, suppressed blinking, good photostability and cytocompatibility, large MPA cross sections, and excellent MPE fluorescence imaging performances make fluorescent Arg/ATT-Au NCs a great candidate of imaging probes with vis-NIR excitation.

Experimental and Theoretical Study of the Ultrafast Dynamics of a Ni2 Dy2 -Compound in DMF After UV/Vis Photoexcitation

We present a combined experimental and theoretical study of the ultrafast transient absorption spectroscopy results of a {Ni₂Dy₂}‐compound in DMF, which can be considered as a prototypic molecule for single molecule magnets. We apply state‐of‐the‐art ab initio quantum chemistry to quantitatively describe the optical properties of an inorganic complex system comprising ten atoms to form the chromophoric unit, which is further stabilized by surrounding ligands. Two different basis sets are used for the calculations to specifically identify two dominant peaks in the ground state. Furthermore, we theoretically propagate the compound's correlated many‐body wavefunction under the influence of a laser pulse as well as relaxation processes and compare against the time‐resolved absorption spectra. The experimental data can be described with a time constant of several hundreds of femtoseconds attributed to vibrational relaxation and trapping into states localized within the band gap. A second time constant is ascribed to the excited state while trap states show lifetimes on a longer timescale. The theoretical propagation is performed with the density‐matrix formalism and the Lindblad superoperator, which couples the system to a thermal bath, allowing us to extract relaxation times from first principles.

Origin of Low Temperature Trion Emission in CdSe Nanoplatelets

Colloidal semiconductor nanoplatelets (NPLs) are a scalable materials platform for optoelectronic applications requiring fast and narrow emission, including spin-to-photon transduction within quantum information networks. In particular, three-particle negative trions of NPLs are appealing emitters since, unlike excitons, they do not have an optically "dark" sublevel. In CdSe NPLs, trion emission dominates the photoluminescence (PL) spectrum at low temperature but using them as single photon-emitting states requires more knowledge about their preparation, since trions in these materials are not directly optically accessible from the ground state. This work demonstrates, using power-dependent time-resolved transient absorptions (TA) of CdSe NPLs, that trions form via biexciton decay in 1.6 ps. The scaling of the trion population and formation lifetime with excitation power indicates that they do not form through collisional mechanisms typical for 2D materials, but rather by a unimolecular hole transfer. This work is a step toward deterministic single photon emission from trions.

Ultrafast Interlayer Charge Transfer between Bilayer PtSe2 and Monolayer WS2

Interlayer charge transfer (CT) between PtSe₂ and WS₂ is studied experimentally. Layer-selective pump-probe and photoluminescence quenching measurements reveal ultrafast interlayer CT in the heterostructure formed by bilayer PtSe₂ and monolayer WS₂, confirming its type-II band alignment. The CT facilitates the formation of the interlayer excitons with a lifetime of several hundred ps to 1 ns, a diffusion coefficient of 0.9 cm² s^-1, and a diffusion length reaching 200 nm. These results demonstrate the integration of PtSe₂ with other materials in van der Waals heterostructures with novel charge-transfer properties and help develop fundamental understanding on the performance of various optoelectronic devices based on heterostructures involving PtSe₂.

Engineering a Non-Natural Photoenzyme for Improved Photon Efficiency*

Photoenzymes are biological catalysts that use light to convert starting materials into products. These catalysts require photon absorption for each turnover, making quantum efficiency an important optimization parameter. Flavin-dependent "ene"-reductases (EREDs) display latent photoenzymatic activity for synthetically valuable hydroalkylations; however, protein engineering has not been used to optimize this non-natural function. We describe a protein engineering platform for the high throughput optimization of photoenzymes. A single round of engineering results in improved catalytic function toward the synthesis of γ, δ, ϵ-lactams, and acyclic amides. Mechanistic studies show that key mutations can alter the enzyme's excited state dynamics, enhance its photon efficiency, and ultimately increase catalyst performance. Transient absorption spectroscopy reveals that engineered variants display dramatically decreased radical lifetimes, indicating an evolution toward a concerted mechanism.

Highly Efficient Phosphorescent Blue-Emitting [3+2+1] Coordinated Iridium (III) Complex for OLED Application

Cyclometalated iridium (III) complexes are indispensable in the field of phosphorescent organic light-emitting diodes (PhOLEDs), while the improvement of blue iridium (III) complexes is as yet limited and challenging. More diversified blue emitters are needed to break through the bottleneck of the industry. Hence, a novel [3+2+1] coordinated iridium (III) complex (noted as Ir-dfpMepy-CN) bearing tridentate bis-N-heterocyclic carbene (NHC) chelate (2,6-bisimidazolylidene benzene), bidentate chelates 2-(2,4-difluorophenyl)-4-methylpyridine (dfpMepy), and monodentate ligand (-CN) has been designed and synthesized. The tridentate bis-NHC ligand enhances molecular stability by forming strong bonds with the center iridium atom. The electron-withdrawing groups in the bidentate ligand (dfpMepy) and monodentate ligand (-CN) ameliorate the stability of the HOMO levels. Ir-dfpMepy-CN shows photoluminescence peaks of 440 and 466 nm with a high quantum efficiency of 84 ± 5%. Additionally, the HATCN (10 nm)/TAPC (40 nm)/TcTa (10 nm)/10 wt% Ir-dfpMepy-CN in DPEPO (10 nm)/TmPyPB (40 nm)/Liq (2.5 nm)/Al (100 nm) OLED device employing the complex shows a CIE coordinate of (0.16, 0.17), reaching a deeper blue emission. The high quantum efficiency is attributed to rapid singlet to triplet charge transfer transition of 0.9–1.2 ps. The successful synthesis of Ir-dfpMepy-CN has opened a new window to develop advanced blue emitters and dopant alternatives for future efficient blue PhOLEDs.

The Critical Number of Gold Atoms for a Metallic State Nanocluster: Resolving a Decades-Long Question

Probing the transition from a metallic state to a molecular state in gold nanoparticles is fundamentally important for understanding the origin of surface plasmon resonance and the nature of the metallic bond. Atomically precise gold nanoclusters are desired for probing such a transition based upon a series of precise sizes with X-ray structures. While the definition of the metallic state in nanoclusters is simple, that is, when the HOMO-LUMO gap (E_g) becomes negligibly small (E_g < k_BT, where k_B is the Boltzmann constant and T the temperature), the experimental determination of ultrasmall E_g (e.g., of k_BT level) is difficult, and the thermal excitation of valence electrons apparently comes into play in ultrasmall E_g nanoclusters. Although a sharp transition from nonmetallic Au₂₄₆(SR)₈₀ to metallic Au₂₇₉(SR)₈₄ (SR: thiolate) has been observed, there is still uncertainty about the transition region. Here, we summarize several criteria on determining the metallic state versus the molecular (or nonmetallic) state in gold nanoclusters, including (1) E_g determined by optical and electrochemical methods, (2) steady-state absorption spectra, (3) cryogenic optical spectra, (4) transient absorption spectra, (5) excited-state lifetime and power dependence, and (6) coherent oscillations in ultrafast electron dynamics. We emphasize that multiple analyses should be performed and cross-checked in practice because no single criterion is definitive. We also review the photophysics of several gold nanoclusters with nascent surface plasmon resonance. These criteria are expected to deepen the understanding of the metallic to molecular state transition of gold and other metal nanoclusters and also promote the design of functional nanomaterials and their applications.

Nanoantennas Involved Optical Plasmonic Cavity for Improved Luminescence of Quantum Dots Light-Emitting Diodes

The optical plasmonic cavity (OPC) including the metallic optical nanoantennas and a metal film exhibits extreme field enhancement for the increased spontaneous emission rate of emitters. The resonance wavelength of the OPC can be easily controlled by the volume of the OPC and the localized surface plasmonic resonances (LSPRs) of the nanoantennas, facilitating the effective coupling of OPC and the emitters. However, involving the OPC into the light emission-enhanced solution-processed devices is still a difficult challenge. The trade-off between the metallic structure of OPC and the solution procedures limits the performance enhancement of the electrical-driven devices. In this work, we construct a device-compatible OPC that allows the characterization of the carrier dynamics of quantum dot (QD) films in the real devices in-suit. The radiative recombination rate and relaxation rate of carriers in QDs are increased by the LSPR effect of the silver nanocubes for luminescence enhancement. The OPC further increases the spontaneous emission rate of QD films, achieving a Purcell factor of 166 and improving the electroluminescence of the OPC-based QD light-emitting diodes (QLEDs). The design of the OPC-involved QLEDs offers a solution for addressing the limitation of fabrication of OPC-combined solution-processed optoelectronic light sources.

Photocarrier Dynamics in MoTe2 Nanofilms with 2H and Distorted 1T Lattice Structures

Molybdenum telluride (MoTe₂), an emerging layered two-dimensional (2D) material, possesses excellent phase-changing properties. Previous studies revealed its reversible transition between 2H and 1T' phases with a transition energy as small as 35 meV. Since 1T'-MoTe₂ is metallic, it can serve as an electrical contact for semiconducting 2H-MoTe₂-based optoelectronic devices. Here, the photocarrier dynamics in MoTe₂ nanofilms synthesized by a one-step method and with coexisting multiple phases are investigated by transient absorption measurements. Both the energy relaxation time and the recombination lifetime of the excitons are shorter in the 1T'-MoTe₂ compared to its 2H phase. These results provide information on the different photocarrier dynamical properties of these two phases, which is important for future 2D optoelectronic and phase-change electronic devices based on MoTe₂.

The Photophysics and Photochemistry of Melanin- Like Nanomaterials Depend on Morphology and Structure

Melanin‐like nanomaterials have found application in a large variety of high economic and social impact fields as medicine, energy conversion and storage, photothermal catalysis and environmental remediation. These materials have been used mostly for their optical and electronic properties, but also for their high biocompatibility and simplicity and versatility of preparation. Beside this, their chemistry is complex and it yields structures with different molecular weight and composition ranging from oligomers, to polymers as well as nanoparticles (NP). The comprehension of the correlation of the different compositions and morphologies to the optical properties of melanin is still incomplete and challenging, even if it is fundamental also from a technological point of view. In this minireview we focus on scientific papers, mostly recent ones, that indeed examine the link between composition and structural feature and photophysical and photochemical properties proposing this approach as a general one for future research.

Fluorescence-Detected Pump-Probe Spectroscopy

We introduce a new approach to transient spectroscopy, fluorescence-detected pump-probe (F-PP) spectroscopy, that overcomes several limitations of traditional PP. F-PP suppresses excited-state absorption, provides background-free detection, removes artifacts resulting from pump-pulse scattering, from non-resonant solvent response, or from coherent pulse overlap, and allows unique extraction of excited-state dynamics under certain conditions. Despite incoherent detection, time resolution of F-PP is given by the duration of the laser pulses, independent of the fluorescence lifetime. We describe the working principle of F-PP and provide its theoretical description. Then we illustrate specific features of F-PP by direct comparison with PP, theoretically and experimentally. For this purpose, we investigate, with both techniques, a molecular squaraine heterodimer, core-shell CdSe/ZnS quantum dots, and fluorescent protein mCherry. F-PP is broadly applicable to chemical systems in various environments and in different spectral regimes.

Single Trap States in Single CdSe Nanoplatelets

Trap states can strongly affect semiconductor nanocrystals, by quenching, delaying, and spectrally shifting the photoluminescence (PL). Trap states have proven elusive and difficult to study in detail at the ensemble level, let alone in the single-trap regime. CdSe nanoplatelets (NPLs) exhibit significant fractions of long-lived "delayed emission" and near-infrared "trap emission". We use these two spectroscopic handles to study trap states at the ensemble and the single-particle level. We find that reversible hole trapping leads to both delayed and trap PL, involving the same trap states. At the single-particle level, reversible trapping induces exponential delayed PL and trap PL, with lifetimes ranging from 40 to 1300 ns. In contrast with exciton PL, single-trap PL is broad and shows spectral diffusion and strictly single-photon emission. Our results highlight the large inhomogeneity of trap states, even at the single-particle level.