The potential impact of the new 'Right to Repair' rules on electrical and electronic equipment waste: A case study of the UK

Every year an estimated two million tonnes of waste electrical and electronic equipment (WEEE) are discarded by householders and companies in the United Kingdom (UK). While the UK has left the European Union (EU), its waste-related policies still mirror those of the EU, including the WEEE-related policies. Motivated by the recent introduction the so-called 'Right to Repair' policy for electrical and electronic equipment (EEE) across the EU and UK, this paper aims to demonstrate that, depending on the commitment and behavioural changes by the consumers and the government, the future of the WEEE management of the UK will vary. To this end, focusing on landfilled WEEE reduction we develop a generic system dynamics model and apply it to eleven WEEE categories. They depict the flow of EEE and WEEE representing the interaction among the stakeholders (e.g., consumers and producers of EEE) and relevant government regulations of the UK. Our four scenario analyses find that longer use of EEE and better WEEE collection seem to be effective in reducing landfilled WEEE, while more reuse and more recycling and recovery have negligible impacts, despite excluding the additional generation of landfilled WEEE as a result of recycling and recovery. Comparing with the business-as-usual scenario, one year longer EEE use and 10% more of WEEE collection could at maximum reduce landfilled WEEE by 14.05% of monitoring and control instruments and 93.93% of display equipment respectively. Backcasting scenario analyses reveal that significant efforts are required to reduce the targeted amounts.

Risks and implications for health and the environment associated with products and waste containing nanomaterials: regulatory and management issues in the European framework

Nanomaterials can revolutionize everyday products, but there are still many unanswered questions about the risks they may pose to human health and the environment. Inconsistent definitions and metrological issues are still of concern for manufacturers, importers and distributors who are demanded to comply with strict regulations. It is also likely that the increasing number of nanomaterial-containing products available on the market will vary the chemical and physical properties of the waste produced, which is currently treated in traditional plants without any particular differentiation. Treatment efficiency for nanomaterials-containing waste should then be addressed and the risks of uncontrolled emissions considered. Finally, the risks associated with the use of nanomaterials-containing products may not be sufficiently characterized as current exposure estimation models are not designed for estimating exposure to nanomaterials and they are likely to be affected by large uncertainties. Hence, it would be important for national and international institutions to provide, as soon as possible, harmonized regulations covering all aspects of the life cycle of products and waste containing nanomaterials. This paper is proposed as a starting point for reflection on the main regulatory and management issues associated with products and waste containing nanomaterials, focusing mainly on the European framework.

New Policy and Implementation of Municipal Solid Waste Classification in Shanghai, China

To promote sustainable development, the Chinese government launched a new municipal solid waste (MSW) classification strategy in 2017. Shanghai was selected as one of the first pilot cities for MSW classification. The Shanghai municipal government first established the new MSW classification policy in 2017. The Shanghai Municipal Solid Waste Management Regulation was published in 2019 and came into effect on 1 July 2019. This short communication reports on Shanghai's new MSW classification policy and its implementation. The main content and measures adopted by Shanghai's government to ensure the effective implementation of the new MSW classification policy are introduced. Besides, a SWOT (i.e., strengths, weaknesses, opportunities, and threats) analysis on the present policy and measures is conducted, and based on the results, some discussions and suggestions regarding the implementation of MSW classification in Shanghai and the whole of China are presented.

Electronic Waste Governance under "One Country, Two Systems": Hong Kong and Mainland China

China is one of the largest e-waste dumping sites in the world, and Hong Kong, a semi-autonomous territory in China, is also affected by illegal e-waste disposal and transfer. While the Chinese government implemented a waste import ban in January 2018, Hong Kong has not enforced Chinese policies under the “One Country, Two Systems” framework. Drawing on a policy network approach, this paper provides an explanatory framework for e-waste governance in Hong Kong and China, and identifies the major obstacles to shaping effective transboundary e-waste control and prevention. The paper argues that institutional arrangements play a dominant role in governing e-waste policy networks at the local level of governance in Hong Kong and China; however, a lack of accountability and capacity at the transboundary level can explain the different waste electrical and electronic equipment (WEEE) management strategies in these two places.

Predictors of illegal dumping at charitable collection points

Cleaning and disposal of illegal dumping at charitable collection points costs charities and diverts funds from their charitable programs. However, there is no published literature that attempts to better understand this problem. The current study assesses site-specific characteristics, community level indicators and sociodemographic factors as predictors of both charity stores and collection bin dumping in the metropolitan area of Perth, Australia. Multiple regression analyses revealed that higher levels of dumping at stores were predicted by being open on Sundays, the presence of gates/fencing, bringing bins in at night, greater 5-year mobility and lower levels of education and occupation in the area. The analysis also suggests that preventative measures have not necessarily been effective at reducing the amount of illegal dumping at stores. For charity bins, significant predictors of higher levels of dumping included private land ownership, if the site is shared with bins from another charity, the number of bins at the site, the number of days serviced per week, if the bin/s are located at a park/reserve and greater 5-year mobility. These results indicate that there is a combination of site-specific characteristics and community level indicators that play a role in illegal dumping at charitable collection points and indicate the type of interventions which may be successful in reducing illegal dumping. These may include improved maintenance, better placement of bins and signage and collaborations with real estate agents.

Food contamination by PCBs and waste disposal crisis: Evidence from goat milk in Campania (Italy)

AIM

The study aims at investigating whether, and if so, to what extent the strong presence of urban and industrial waste in a territory may cause PCB contamination in goat milk produced therein.

METHODS

We compared PCB concentrations in goat milk from three different locations in the Campania region (Italy). One of the three locations, together with its surrounding area, has long suffered from illegal waste disposal and burning mainly by the so-called Ecomafia. The other locations, not involved in these illegal activities, allowed us to create a control group of goats with characteristics very similar to those of main interest.

RESULTS

In milk from the waste contaminated area we identified high PCB concentrations (six indicator PCBs amounted to 170 ng g^-1 on lipid weight, on average), whereas there was an almost total absence of such pollutants in milk from the control group. Concentrations of the six indicator PCBs were above the current European maximum residue limit fixed by the EU. At the same time, we found a lower average value of lipid content and a negative relationship between lipid content and PCB concentrations.

CONCLUSION

Evidence indicates the potential health risk for consumers living in areas involved in illegal dumping of waste.

Wastewater and sludge management and research in Oman: An overview

It is well recognized that management of wastewater and sludge is a critical environmental issue in many countries. Wastewater treatment and sludge production take place under different technical, economic, and social contexts, thus requiring different approaches and involving different solutions. In most cases, a regular and environmentally safe wastewater treatment and associated sludge management requires the development of realistic and enforceable regulations, as well as treatment systems appropriate to local circumstances. The main objective of this paper is to provide useful information about the current wastewater and sludge treatment, management, regulations, and research in Oman. Based on the review and discussion, the wastewater treatment and sludge management in Oman has been evolving over the years. Further, the land application of sewage sludge should encourage revision of existing standards, regulations, and policies for the management and beneficial use of sewage sludge in Oman.

IMPLICATIONS

Wastewater treatment and sludge management in Oman have been evolving over the years. Sludge utilization has been a challenge due to its association with human waste. Therefore, composting of sewage sludge is the best option in agriculture activities. Sludge and wastewater utilization can add up positively in the economic aspects of the country in terms of creating jobs and improving annual income rate. The number of research projects done on wastewater reuse and other ongoing ones related to the land application of sewage sludge should encourage revision of existing standards, regulations, and policies for the management and beneficial use of sewage sludge in Oman.

Prevention policies addressing packaging and packaging waste: Some emerging trends

Packaging waste is a major issue in several countries. Representing in industrialized countries around 30-35% of municipal solid waste yearly generated, this waste stream has steadily grown over the years even if, especially in Europe, specific recycling and recovery targets have been fixed. Therefore, an increasing attention starts to be devoted to prevention measures and interventions. Filling a gap in the current literature, this explorative paper is a first attempt to map the increasingly important phenomenon of prevention policies in the packaging sector. Through a theoretical sampling, 11 countries/states (7 in and 4 outside Europe) have been selected and analyzed by gathering and studying primary and secondary data. Results show evidence of three specific trends in packaging waste prevention policies: fostering the adoption of measures directed at improving packaging design and production through an extensive use of the life cycle assessment; raising the awareness of final consumers by increasing the accountability of firms; promoting collaborative efforts along the packaging supply chains.

Assessment of collection schemes for packaging and other recyclable waste in European Union-28 Member States and capital cities

The Waste Framework Directive obliged European Union Member States to set up separate collection systems to promote high quality recycling for at least paper, metal, plastic and glass by 2015. As implementation of the requirement varies across European Union Member States, the European Commission contracted BiPRO GmbH/Copenhagen Resource Institute to assess the separate collection schemes in the 28 European Union Member States, focusing on capital cities and on metal, plastic, glass (with packaging as the main source), paper/cardboard and bio-waste. The study includes an assessment of the legal framework for, and the practical implementation of, collection systems in the European Union-28 Member States and an in depth-analysis of systems applied in all capital cities. It covers collection systems that collect one or more of the five waste streams separately from residual waste/mixed municipal waste at source (including strict separation, co-mingled systems, door-to-door, bring-point collection and civic amenity sites). A scoreboard including 13 indicators is elaborated in order to measure the performance of the systems with the capture rates as key indicators to identify best performers. Best performance are by the cities of Ljubljana, Helsinki and Tallinn, leading to the key conclusion that door-to-door collection, at least for paper and bio-waste, and the implementation of pay-as-you-throw schemes results in high capture and thus high recycling rates of packaging and other municipal waste.

Classification and management of asbestos-containing waste: European legislation and the Italian experience

OBJECTIVE

Production of a new classification of Asbestos Containing Products (ACPs), materials (ACM) and Asbestos Containing Waste (ACW), in addition to a correct identification of landfills where ACW should be disposed of in Europe.

METHODS

Analysis of the European and Italian legislation, study of waste classification and management in the main European countries, data analysis of mapping of Italian landfills and quantification of ACW disposed there.

FINDINGS

Classification according to unique criteria (physical state, substances with which asbestos minerals have been blended, function of the asbestos, etc.). Highlights of cases of incorrect management of ACW in Europe, specifying the Italian ones. Considering the significant inconsistencies between the European and national regulations and the actual implementation of those regulations, this paper provide some precise indications for the proper assignment to ACW of the European Waste Catalogue (EWC) codes. Lastly, suitable types of landfills at which ACW should be disposed of have been identified, in order to assisting the persons involved in ACW management to avoid undue exposition and their improper disposal.

CONCLUSION

This study reports a useful manual for classifying worldwide ACPs based on their physical state and considering the substances with which the asbestos minerals have been blended. Moreover several clear tables allow the asbestos remediation and waste management operators to suitably classify and dispose of ACW.

Determination of the knowledge of e-waste disposal impacts on the environment among different gender and age groups in China, Laos, and Thailand

E-waste is the fastest growing waste in the solid waste stream in the urban environment. It has become a widely recognised social and environmental problem; therefore, proper management is vital to protecting the fragile environment from its improper disposal. Questionnaire surveys were conducted to determine the knowledge of environmental impacts of e-waste disposal as it relates to mobile phones among different gender and age groups in China, Laos, and Thailand. The results revealed that gender was positively correlated with their knowledge of the status of environmental conditions (P104) (r = 0.077, n = 1994, p < 0.01) and negatively correlated with their knowledge of how to improve environmental conditions (P105) (r = -0.067, n = 2037, p < 0.01). In addition, an increase in age was positively correlated with respondents' concern over the environmental conditions (P103) (r = 0.052, n = 2077, p < 0.05) and P105 (r = 0.061, n = 2061, p < 0.01) mentioned above. The results indicated that female respondents were less knowledgeable about how to improve environmental conditions than male respondents in the three countries. Knowledge gaps were detected in the respondents, at age ⩽17, in the three countries, and from age 18-22 to 36-45 or older from Thailand and China, on their knowledge of the existing e-waste-related laws. Thus, an effort to bridge the gaps through initiating proper educational programmes in these two countries is necessary.

The global economic and regulatory determinants of household food waste generation: A cross-country analysis

Food is generally wasted all along the supply chain, with an estimated loss of 35percent generated at the consumer level. Consequently, household food waste constitutes a sizable proportion of the total waste generated throughout the food supply chain. Yet such wastes vary drastically between developed and developing countries. Using data collected from 44 countries with various income levels, this paper investigates the impact of legislation and economic incentives on household food waste generation. The obtained results indicate that well-defined regulations, policies and strategies are more effective than fiscal measures in mitigating household food waste generation.

Management of waste electrical and electronic equipment in Romania: A mini-review

Around the world there are growing concerns for waste electrical and electronic equipment. This is motivated by the harmful effects of waste electrical and electronic equipment on the environment, but also by the perspectives of materials recovery. Differences between countries regarding waste electrical and electronic equipment management are notable in the European Union. Romania is among the countries that have made significant efforts to comply with European Union regulations, but failed reaching the collection target. The article presents a mini review of the waste electrical and electronic equipment management system in Romania, based on legislation and policy documents, statistical data, research studies and reports published by national and international organisations. The article debates subjects like legislative framework, the electrical and electronic equipment Romanian market, the waste electrical and electronic equipment collection system, waste electrical and electronic equipment processing and waste electrical and electronic equipment behaviour. The recast of the European directive brings new challenges to national authorities and to other stakeholders involved in the waste electrical and electronic equipment management. Considering the fact that Romania has managed a collection rate of roughly 1 kg capita(-1) in the last years, the new higher collection targets established by the waste electrical and electronic equipment Directive offer a serious challenge for the management system. Therefore, another aim of the article is to highlight the positive and negative aspects in the Romanian waste electrical and electronic equipment field, in order to identify the flows that should be corrected and the opportunities that could help improve this system to the point of meeting the European standards imposed by the European Directive.

Standardized characterization procedures: a necessary support to regulations

Sustainable procedures for sludge/biosolids management require the development of strategies to reduce the amount of sludge to be handled and to produce higher quality biosolids. Therefore, realistic and enforceable regulations adapted to local situations must be developed, defined outlet procedures established and good quality products guaranteed. To this end, the definition of standardized characterization procedures and guidelines for good practices becomes a necessary support to regulations. To contribute to the development of the EU directives dealing with sludge, the European Committee for Standardization (CEN) has established Technical Committee 308 (TC 308) whose scope is the standardization of methods for sludge characterization and the production of guidelines of good practice. In this paper, the most recent developments of the CEN/TC 308 work for the chemical, biological and physical characterization of sludge/biosolids are discussed in relation to the main different treatment and outlet options.

Recovery of essential nutrients from municipal solid waste--Impact of waste management infrastructure and governance aspects

Every year 120-140 million tonnes of bio-waste are generated in Europe, most of which is landfilled, incinerated or stabilized and used as covering material in landfill operation. None of these practices enables the recovery of essential nutrients such as phosphorus (P) and nitrogen (N), which are in great demand for agricultural production. Recovery of these nutrients is a matter of international concern considering the non-renewable nature of P sources and the energy intensive production process required for the synthesis of N fertilizers. The objective of this research is to understand the relation between the municipal solid waste management (MSWM) system, both its the physical components and governance aspects, and the recovery of nutrients in Vitoria-Gasteiz (Basque Country) as a benchmark for European medium-size cities. The analysis shows that the existing physical infrastructure and facilities for bio-waste have high potential for nutrient recovery, 49% for N and 83% for P contained in bio-waste. However, governance aspects of the MSWM system such as legislation and user inclusivity play an important role and decrease the actual nutrient recovery to 3.4% and 7.4% for N and P respectively.

Hazardous waste status of discarded electronic cigarettes

The potential for disposable electronic cigarettes (e-cigarettes) to be classified as hazardous waste was investigated. The Toxicity Characteristic Leaching Procedure (TCLP) was performed on 23 disposable e-cigarettes in a preliminary survey of metal leaching. Based on these results, four e-cigarette products were selected for replicate analysis by TCLP and the California Waste Extraction Test (WET). Lead was measured in leachate as high as 50mg/L by WET and 40mg/L by TCLP. Regulatory thresholds were exceeded by two of 15 products tested in total. Therefore, some e-cigarettes would be toxicity characteristic (TC) hazardous waste but a majority would not. When disposed in the unused form, e-cigarettes containing nicotine juice would be commercial chemical products (CCP) and would, in the United States (US), be considered a listed hazardous waste (P075). While household waste is exempt from hazardous waste regulation, there are many instances in which such waste would be subject to regulation. Manufactures and retailers with unused or expired e-cigarettes or nicotine juice solution would be required to manage these as hazardous waste upon disposal. Current regulations and policies regarding the availability of nicotine-containing e-cigarettes worldwide were reviewed. Despite their small size, disposable e-cigarettes are consumed and discarded much more quickly than typical electronics, which may become a growing concern for waste managers.

Environmental pollution from illegal waste disposal and health effects: a review on the "triangle of death"

The term “triangle of death” was used for the first time by Senior and Mazza in the journal The Lancet Oncology referring to the eastern area of the Campania Region (Southern Italy) which has one of the worst records of illegal waste dumping practices. In the past decades, many studies have focused on the potential of illegal waste disposal to cause adverse effects on human health in this area. The great heterogeneity in the findings, and the bias in media communication has generated great healthcare doubts, anxieties and alarm. This paper addresses a review of the up-to-date literature on the “triangle of death”, bringing together the available information on the occurrence and severity of health effects related to illegal waste disposal. The Scopus database was searched using the search terms “waste”, “Campania”, “Naples”, “triangle of death” and “human biomonitoring”. Despite the methodological and sampling heterogeneity between the studies, this review examines the evidence from published data concerning cancer incidence, childhood mortality and birth defects, so that the current situation, knowledge gaps and research priorities can be established. The review aims to provide a contribution to the scientific community, and to respond to the concerns of the general population.

[Approaches of European and Russian legislation in the field of management of medical waste]

A comparative analysis of Russian and European legislation concerning to the waste management has been performed. There were revealed principal differences in Russian and European legislation in methodology of the waste classification. In Europe, there is no methodology for breaking up waste into hazard classes, and for the denomination of the danger there are used hazard lists which fail to give information about the extent of their danger. Medical waste in the European legislation are not selected into the separate category as being included in terms of articles and lists in the annexes to the directives or other legal acts. There are considered requirements of the Russian and European legislation in the area of the landfill waste burial. In the frameworks of the proposals for the implementation of international experience in the waste management there was drafted the project of Sanitary rules on hygiene requirements to the arrangement and the contents of landfills for residential solid waste, which includes requirements concerning not only residential solid waste, but also medical waste.

Landfill reduction experience in The Netherlands

Modern waste legislation aims at resource efficiency and landfill reduction. This paper analyses more than 20 years of landfill reduction in the Netherlands. The combination of landfill regulations, landfill tax and landfill bans resulted in the desired landfill reduction, but also had negative effects. A fierce competition developed over the remaining waste to be landfilled. In 2013 the Dutch landfill industry generated €40 million of annual revenue, had €58 million annual costs and therefore incurred an annual loss of €18 million. It is not an attractive option to prematurely end business. There is a risk that Dutch landfill operators will not be able to fulfil the financial obligations for closure and aftercare. Contrary to the polluter pays principle the burden may end up with society. EU regulations prohibiting export of waste for disposal are in place. Strong differentials in landfill tax rate between nations have nevertheless resulted in transboundary shipment of waste and in non-compliance with the self-sufficiency and proximity principles. During the transformation from a disposal society to a recycling society, it is important to carefully plan required capacity and to guide the reorganisation of the landfill sector. At some point, it is no longer profitable to provide landfill services. It may be necessary for public organisations or the state to take responsibility for the continued operation of a 'safety net' in waste management. Regulations have created a financial incentive to pass on the burden of monitoring and controlling the impact of waste to future generations. To prevent this, it is necessary to revise regulations on aftercare and create incentives to actively stabilise landfills.

Assessment of mobility and bioavailability of contaminants in MSW incineration ash with aquatic and terrestrial bioassays

Incineration of municipal solid waste (MSW) is a waste treatment method which can be sustainable in terms of waste volume reduction as well as a source of renewable energy. In the process fly and bottom ash is generated as a waste material. The ash residue may vary greatly in composition depending on the type of waste incinerated and it can contain elevated levels of harmful contaminants such as heavy metals. In this study, the ecotoxicity of a weathered, untreated incineration bottom ash was characterized as defined by the H14 criterion of the EU Waste Framework Directive by means of an elemental analysis, leaching tests followed by a chemical analysis and a combination of aquatic and solid-phase bioassays. The experiments were conducted to assess the mobility and bioavailability of ash contaminants. A combination of aquatic and terrestrial bioassays was used to determine potentially adverse acute effects of exposure to the solid ash and aqueous ash leachates. The results from the study showed that the bottom ash from a municipal waste incineration plant in mid-Sweden contained levels of metals such as Cu, Pb and Zn, which exceeded the Swedish EPA limit values for inert wastes. The chemical analysis of the ash leachates showed high concentrations of particularly Cr. The leachate concentration of Cr exceeded the limit value for L/S 10 leaching for inert wastes. Filtration of leachates prior to analysis may have underestimated the leachability of complex-forming metals such as Cu and Pb. The germination test of solid ash and ash leachates using T. repens showed a higher inhibition of seedling emergence of seeds exposed to the solid ash than the seeds exposed to ash leachates. This indicated a relatively low mobility of toxicants from the solid ash into the leachates, although some metals exceeded the L/S 10 leaching limit values for inert wastes. The Microtox® toxicity test showed only a very low toxic response to the ash leachate exposure, while the D. magna immobility test showed a moderately high toxic effect of the ash leachates. Overall, the results from this study showed an ecotoxic effect of the solid MSW bottom ash and the corresponding ash leachates. The material may therefore pose an environmental risk if used in construction applications. However, as the testing of the solid ash was rather limited and the ash leachate showed an unusually high leaching of Cr, further assessments are required in order to conclusively characterize the bottom ash studied herein as hazardous according to the H14 criterion.

Disposal of controlled substances. Final rule

This rule governs the secure disposal of controlled substances by registrants and ultimate users. These regulations will implement the Secure and Responsible Drug Disposal Act of 2010 by expanding the options available to collect controlled substances from ultimate users for the purpose of disposal, including: Take-back events, mail-back programs, and collection receptacle locations. These regulations contain specific language allowing law enforcement to voluntarily continue to conduct take-back events, administer mail-back programs, and maintain collection receptacles. These regulations will allow authorized manufacturers, distributors, reverse distributors, narcotic treatment programs (NTPs), hospitals/clinics with an on-site pharmacy, and retail pharmacies to voluntarily administer mail-back programs and maintain collection receptacles. In addition, this rule expands the authority of authorized hospitals/clinics and retail pharmacies to voluntarily maintain collection receptacles at long-term care facilities. This rule also reorganizes and consolidates previously existing regulations on disposal, including the role of reverse distributors.

The challenges for solid waste management in accordance with Agenda 21: a Brazilian case review

This paper aims to evaluate the suitability of the Brazilian solid waste policy (BSWP) with global Agenda 21 and the challenges of implementing the BSWP in municipalities. For this, a review of the principles that guided the creation of this policy was performed to demonstrate that international pressures were important in determining its effectiveness. The contradictory relationship between the satisfactory legal framework that established the Brazilian waste management policy and its weakened implementation in the municipalities is also examined . To illustrate the difficulties faced at the local level, a case study involving municipalities that compose the state of Espírito Santowe was undertaken. In this state, the municipalities signed terms of environmental commitment with supervisory agencies who undertook, within a pre-established schedule, to implement a set of actions to shape the proper management of solid waste, adapted to the requirements of national policy and the guidelines of Agenda 21. Finally, the various difficulties in meeting the requirements are discussed. It is necessary and urgent that Brazil finds a way to coordinate the mechanisms of an innovative and well formulated legal instrument to ensure the successful implementation of solid waste management at the local level to achieve the environmental, economic and social objectives.

An urgent need for an EPA standard for disposal of coal ash

EPA, the White House, and electric utilities are stalled in a struggle over a proposed new rule on coal ash disposal. Although this rule is long overdue, EPA now stands on the cusp of bringing forward a landmark decision that could benefit aquatic resources in the USA for decades to come and also set an important regulatory leadership example for the international community to follow. However, multi-million dollar wildlife losses are continuing to pile up as things stall in Washington. In this commentary I use a newly reported example, Wildlife Damage Case 23, to further illustrate serious flaws in the National Pollutant Discharge Elimination System that EPA's new rule can address. Case 23 provides additional impetus for EPA and the White House to move swiftly and decisively to end surface impoundment disposal of coal ash and the associated toxic impacts to wildlife.

Evaluating the effect of vehicle impoundment policy on illegal construction and demolition waste dumping: Israel as a case study

Construction and demolition (C&D) waste dumped alongside roads and in open areas is a major source of soil and underground water pollution. Since 2006, Israeli ministry for environmental protection enacted a policy of vehicle impoundment (VI) according to which track drivers caught while dumping C&D waste illegally have their vehicles impounded. The present study attempted to determine whether the VI policy was effective in increasing the waste hauling to authorized landfill sites, thus limiting the number of illegal unloads of C&D waste at unauthorized landfill sites and in open areas. During the study, changes in the ratio between the monthly amount of C&D waste brought to authorized landfills sites and the estimated total amount of C&D waste generated in different administrative districts of Israel were examined, before and after the enactment of the 2006 VI policy. Short questionnaires were also distributed among local track drivers in order to determine the degree of awareness about the policy in question and estimate its deterrence effects. According to the study's results, in the district of Haifa, in which the VI policy was stringently enacted, the ratio between C&D waste, dumped in authorized landfill sites, and the total amount of generated C&D waste, increased, on the average, from 20% in January 2004 to 35% in October 2009, with the effect attributed to the number of vehicle impoundments being highly statistically significant (t=2.324; p<0.05). By contrast, in the Jerusalem and Southern districts, in which the VI policy was less stringently enforced, the effect of VI on the above ratio was found to be insignificant (p>0.1). The analysis of the questionnaires, distributed among the local truck drivers further indicated that the changes observed in the district of Haifa are not coincident and appeared to be linked to the VI policy's enactment. In particular, 62% of the truck drivers, participated in the survey, were aware of the policy and 47% of them personally knew a driver whose vehicle was impounded. Furthermore, the drivers estimated the relative risk of being caught for unloading C&D waste in unauthorized sites, on the average, as high as 67%, which is likely to become a deterrent on its own. Our conclusion is that the VI policy appears to have a deterring effect on truck drivers, by encouraging them to haul C&D waste to authorized landfill sites. As we suggest, the research methodology implemented in the study and its results may help policy makers in other regions and countries, which experience similar environment enforcement problem, to analyze policy responses.

Persistent toxic substances released from uncontrolled e-waste recycling and actions for the future

The Basel Convention on the Control of Transboundary Movement of Hazardous Wastes and their Disposal was adopted on March 22, 1989 and enforced on May 5, 1992. Since then, the USA, one of the world's largest e-waste producers, has not ratified this Convention or the Basel Ban Amendment. Communities are still debating the legal loophole, which permits the export of whole products to other countries provided it is not for recycling. In January 2011, China's WEEE Directive was implemented, providing stricter control over e-waste imports to China, including Hong Kong, while emphasizing that e-waste recycling is the producers' responsibility. China is expected to supersede the USA as the principal e-waste producer, by 2020, according to the UNEP. Uncontrolled e-waste recycling activities generate and release heavy metals and POPs into the environment, which may be re-distributed, bioaccumulated and biomagnified, with potentially adverse human health effects. Greater efforts and scientific approaches are needed for future e-product designs of minimal toxic metal and compound use, reaping greater benefits than debating the definition and handling responsibilities of e-waste recycling.

Handling e-waste in developed and developing countries: initiatives, practices, and consequences

Discarded electronic goods contain a range of toxic materials requiring special handling. Developed countries have conventions, directives, and laws to regulate their disposal, most based on extended producer responsibility. Manufacturers take back items collected by retailers and local governments for safe destruction or recovery of materials. Compliance, however, is difficult to assure, and frequently runs against economic incentives. The expense of proper disposal leads to the shipment of large amounts of e-waste to China, India, Pakistan, Nigeria, and other developing countries. Shipment is often through middlemen, and under tariff classifications that make quantities difficult to assess. There, despite the intents of national regulations and hazardous waste laws, most e-waste is treated as general refuse, or crudely processed, often by burning or acid baths, with recovery of only a few materials of value. As dioxins, furans, and heavy metals are released, harm to the environment, workers, and area residents is inevitable. The faster growth of e-waste generated in the developing than in the developed world presages continued expansion of a pervasive and inexpensive informal processing sector, efficient in its own way, but inherently hazard-ridden.

[Influence of ammonia on leaching behaviors of incineration fly ash and its geochemical modeling]

Incineration fly ash could be contaminated with NH3 that was slipped from the ammonia-based selective non-catalytic reduction(SNCR) process and from evaporation of municipal solid wastes' leachate involved in the wastes. This research was conducted to investigate the impacts of ammonia on leaching of dissolved organic carbon (DOC) and metals from incineration fly ash in the pH range of 3.66-12.44 with an active ammonia spike. A geochemical modeling software Visual MINTEQ was adopted to calculate the chemical speciation of metals under the leaching conditions to reveal the mechanism behind the impacts. It was proved that at pH > 9, the leaching of DOC increased significantly in the presence of high concentrations of ammonia (> or = 1 357 mg x L(-1)), but there was little effect when the ammonia level in eluates was not higher than 537 mg x L(-1). At pH < 6, metals in fly ash were released mainly in the form of free metal ions and chloride complexes, which were little influenced by ammonia; while at pH 8-12, higher concentrations of ammonia (> or = 3 253 mg x L(-1)) mobilized Cd, Cu, Ni and Zn significantly due to the formation of soluble metal-ammonia complexes, and the leaching rates reached their peaks at pH around 9; however, ammonia had little impacts on Al and Pb leaching within this pH range. At pH > 12, for Cd, Cu, Ni and Zn, their leaching species were predominantly in the form of hydroxide complexes. Under the ammonia concentration of 3253 mg x L(-1), the Visual MINTEQ modeling results were compared with the experimental data, and it was proved that the leaching of Al, Pb and Zn was mainly controlled by precipitation/dissolution modeling, while Cd, Cu and Ni were controlled by precipitation/dissolution and surface complexation/precipitation processes; Visual MINTEQ modeling could well describe the leaching behaviors of Al, Cu, Pb and Zn from incineration fly ash.

[Pretreatment technology for fly ash from MSWI and the corresponding study of chloride behavior]

The introduced pretreatment technology, WCCB (Washing + Calcination), was effective to reduce chlorides in fly ash by consuming relatively low energy for recycling fly ash as the raw material for cement industry. The washing conditions are: twice-washing, liquid/solid = 3, mixing speed = 150 r x min(-1), 1st mixing time = 5 min, and 2nd mixing time = 10 min. The original incinerator was used for the calcination process, 1 000 degrees C, 10% O2 and dwelling time of 1 hour were adopted. By adopting X-ray absorption near edge structure and X-ray diffraction, the behavior of chlorides was explained and NaCl, KCl and CaCl2 are the main form of chlorides existing in fly ash. The reagent used in the air pollution control system to neutralize the acid component in the discharged gas surely acted a very important role in the formation of chlorides. The insoluble chlorides in fly ash had a very similar structure as that of Friedel's salt, which was related with CaCl2.

Anatomy of a decision: potential regulatory outcomes from changes to chemistry protocols in the Canadian Disposal at Sea Program

Environment Canada currently assesses dredged material proposed for disposal at sea using a two-tiered assessment framework. Tier 1 determines sediment geophysical properties and concentrations of four regulated chemical constituents (Cd, Hg, PAH and PCB), and "other chemicals of interest" based on lower action levels; this is followed by biological assessment. EC is pursuing a "data mining" approach to evaluate potential refinements by compiling sediment chemistry and toxicity datasets, and subjecting them to a series of decision protocols. This paper reports on database development and initial use, and recommends potential changes to Tier 1 chemical protocols and further work to address other aspects of the framework. Major findings include the poor performance of Hg and Cd as sentinels for other metals, the significance of the list of analytes (vs. the specific SQGs used) in decisions, and the potential for chemical upper action levels to save the expense of unnecessary toxicity testing.

Geochemical survey of an illegal waste disposal site under a waste emergency scenario (Northwest Naples, Italy)

Since the mid 1980s, Naples and the Campania region have suffered from the dumping of wastes into overfilled landfills. The aim was to characterise a former cave located in Roccarainola (Naples, Italy) for its eventual destination to a controlled landfill site. A detailed hydro-geochemical survey of the area was carried out through drilling of 14 boreholes and four monitoring wells. Samples of water, sediment and soil were analysed for heavy metals and organic contaminants from a dew pond placed in the middle of the cave. The underneath aquifer was also surveyed. The nature of gases emitted from the site was investigated. Results of the geognostic survey revealed the presence of huge volumes of composite wastes, approximately half a million of cubic metre, which accumulated up to a thickness of 25.6 m. In some points, wastes lie below the free surface level of the aquifer. The sampled material from the boreholes revealed levels of As, Cd, Cr, Cu, Hg, Pb, Sn, Tl and Zn exceeding the intervention legal limits. Outstanding loads of Cd, Pb and Zn were found, with levels exceeding of about 50, 100 and 1,870 times the limit. In several points, polycyclic aromatic hydrocarbon load was extremely high, 35 vs 1 mg kg(-1) of the threshold. The aquifer was also very heavily polluted by Cd, Cr-tot, Cu, Fe, Mn, Ni, Pb and Zn, with impressive high load of Cr and Mn, up to 250-370 times the limits. Hot gases up to 62 °C with presence of xylene and ethylbenzene were found. Results indicated that the site needs an urgent intervention of recovery to avoid compromising the surrounding areas and aquifers of the Campania plain.

An analysis of preferences for hazardous substances free products: manufacturing, use and end of life of mobile phones

Electronic communication devices such as mobile phones pose significant environmental risks when disposed of after the end of their useful life. Mobile communication devices are one of the fastest growing contributors to the electronic waste (e-waste) stream. Recent legislative pressure and increasing awareness about the environmental risk associated with the hazardous components of the electronic products warrants the manufacturers to reduce or replace the hazardous materials with alternatives. The present study analyses the economic consequences of reducing or replacing these hazardous materials and the possible response of the consumers. A strategic game theory model has been applied in this paper for manufacturer and consumers considering the cost difference between hazardous substances free (HSF) and hazardous substance (HS) mobile. Results suggest that the HSF mobiles can be a preferred choice of the manufacturers as well as consumers if the cost of disposal of HS mobiles can be internalized and a marginal incentive (e.g. 0.9% for a cost difference to 5%, and 5.3% for a cost difference to 10%) is given. The study further highlights the need for realizing the fact that passing on the incentives to the consumers in order to promote schemes for return back to manufacturer at its end of life for effective reuse and recycling gives higher returns.

E-waste management challenges in Iran: presenting some strategies for improvement of current conditions

E-waste is one of the fastest-growing waste streams in Iran, owing to an increase in consumption of electrical and electronic equipment. Nevertheless, as is the case in some other countries, E-waste management has not received sufficient attention. For the successful implementation of any waste management plan (including an E-waste management plan), the availability of sufficient and accurate information on the quantities and composition of the waste generated and on current management conditions is a fundamental prerequisite. At present, in Iran, there is no available and accurate information that describes the characteristics and generation rate of E-waste or the actual practice of management and handling of the waste. For this initial study, eight electronic products were selected for the determination of their E-waste generation rate in the country, and two cities, Tehran and Tabriz, were selected for assessment of the current condition of E-waste management. The study found that the amount of E-waste generation in the country for the eight selected electronic items alone was 115,286, 112,914 and 115,151 metric tons in 2008, 2009 and 2010, respectively. Of the types of electronic items included in the study, televisions, with an average of 42.42%, and PCs, with an average of 32.66% accounted for the greatest proportions of the total mass of E-waste generated during 2008-2010. Currently, despite the fact that primary legislation for E-waste management (as part of general waste legislation) exists in Iran, this primary legislation has not yet been implemented. In practical terms, there is no definite policy or plan for the allocation of funds to prepare suitable equipment and facilities for the management and recycling of E-waste at the end of the products' useful life. Proposed improvements in current conditions are identified, first by considering other countries' experiences and then suggesting specific practical policies, rules, and regulations that should be established and applied to all levels of E-waste management. One of the most attractive E-waste management policies is an extended producer responsibility (EPR) programme in combination with a training programme at different levels of society. An approach consisting of a mandated product take back is proposed for implementing EPR in Iran. Meanwhile, the Health Ministry and the Environmental Protection Agency should strictly supervise E-waste collection, storage, and recycling and/or disposal, and the Trade and Industry Ministries must have more control over the import and production of electronic goods.

How the University of Texas system responded to the need for interim storage of low-level radioactive waste materials

Faced with the prospect of being unable to permanently dispose of low-level radioactive wastes (LLRW) generated from teaching, research, and patient care activities, component institutions of the University of Texas System worked collaboratively to create a dedicated interim storage facility to be used until a permanent disposal facility became available. Located in a remote section of West Texas, the University of Texas System Interim Storage Facility (UTSISF) was licensed and put into operation in 1993, and since then has provided safe and secure interim storage for up to 350 drums of dry solid LLRW at any given time. Interim storage capability provided needed relief to component institutions, whose on-site waste facilities could have possibly become overburdened. Experiences gained from the licensing and operation of the site are described, and as a new permanent LLRW disposal facility emerges in Texas, a potential new role for the storage facility as a surge capacity storage site in times of natural disasters and emergencies is also discussed.

E-waste: a problem or an opportunity? Review of issues, challenges and solutions in Asian countries

Safe management of electronic and electrical waste (e-waste/WEEE) is becoming a major problem for many countries around the world. In particular, developing countries face a number of issues with the generation, transboundary movement and management of e-waste. It is estimated that the world generates around 20-50 million tonnes of e-waste annually, most of it from Asian countries. Improper handling of e-waste can cause harm to the environment and human health because of its toxic components. Several countries around the world are now struggling to deal with this emerging threat. Although the current emphasis is on end-of-life management of e-waste activities, such as reuse, servicing, remanufacturing, recycling and disposal, upstream reduction of e-waste generation through green design and cleaner production is gaining much attention. Environmentally sound management (ESM) of e-waste in developing countries is absent or very limited. Transboundary movement of e-waste is a major issue throughout the region. Dealing with the informal recycling sector is a complex social and environmental issue. There are significant numbers of such challenges faced by these countries in achieving ESM of e-waste. This article aims to present a review of challenges and issues faced by Asian countries in managing their e-waste in a sustainable way.

Determinants of sustainability in solid waste management--the Gianyar Waste Recovery Project in Indonesia

According to most experts, integrated and sustainable solid waste management should not only be given top priority, but must go beyond technical aspects to include various key elements of sustainability to ensure success of any solid waste project. Aside from project sustainable impacts, the overall enabling environment is the key feature determining performance and success of an integrated and affordable solid waste system. This paper describes a project-specific approach to assess typical success or failure factors. A questionnaire-based assessment method covers issues of: (i) social mobilisation and acceptance (social element), (ii) stakeholder, legal and institutional arrangements comprising roles, responsibilities and management functions (institutional element); (iii) financial and operational requirements, as well as cost recovery mechanisms (economic element). The Gianyar Waste Recovery Project in Bali, Indonesia was analysed using this integrated assessment method. The results clearly identified chief characteristics, key factors to consider when planning country wide replication but also major barriers and obstacles which must be overcome to ensure project sustainability. The Gianyar project consists of a composting unit processing 60 tons of municipal waste per day from 500,000 inhabitants, including manual waste segregation and subsequent composting of the biodegradable organic fraction.

The Best-of-2-Worlds philosophy: developing local dismantling and global infrastructure network for sustainable e-waste treatment in emerging economies

E-waste is a complex waste category containing both hazardous and valuable substances. It demands for a cost-efficient treatment system which simultaneously liberates and refines target fractions in an environmentally sound way. In most developing countries there is a lack of systems covering all steps from disposal until final processing due to limited infrastructure and access to technologies and investment. This paper introduces the 'Best-of-2-Worlds' philosophy (Bo2W), which provides a network and pragmatic solution for e-waste treatment in emerging economies. It seeks technical and logistic integration of 'best' pre-processing in developing countries to manually dismantle e-waste and 'best' end-processing to treat hazardous and complex fractions in international state-of-the-art end-processing facilities. A series of dismantling trials was conducted on waste desktop computers, IT equipment, large and small household appliances, in order to compare the environmental and economic performances of the Bo2W philosophy with other conventional recycling scenarios. The assessment showed that the performance of the Bo2W scenario is more eco-efficient than mechanical separation scenarios and other local treatment solutions. For equipment containing substantial hazardous substances, it demands the assistance from domestic legislation for mandatory removal and safe handling of such fractions together with proper financing to cover the costs. Experience from Bo2W pilot projects in China and India highlighted key societal factors influencing successful implementation. These include market size, informal competitors, availability of national e-waste legislation, formal take-back systems, financing and trust between industrial players. The Bo2W philosophy can serve as a pragmatic and environmentally responsible transition before establishment of end-processing facilities in developing countries is made feasible. The executive models of Bo2W should be flexibly differentiated for various countries by adjusting to local conditions related to operational scale, level of centralized operations, dismantling depth, combination with mechanical processing and optimized logistics to international end-processors.

Urban governance and spatial inequality in service delivery: a case study of solid waste management in Abuja, Nigeria

Spatial inequality in service delivery is a common feature in African cities. Several factors account for the phenomenon but there is growing attention towards urban governance and the role of the state. Urban governance policies such as privatization serve as key strategies through which the state regulates and (re)produces spatial inequality in service delivery. This study examined how governance practices related to privatization and the regulatory role of the state reinforce spatial inequalities in the delivery of solid waste services in Abuja, Nigeria. It focused primarily on the issue of cost recovery. Privatization became a major focus in Abuja in 2003 when the government launched a pilot scheme. Although it has brought improvements in service delivery, privatization has also increased the gap in the quality of services delivered in different parts of the city. Drawing on empirical data, the study revealed that little sensitivity to income and affordability, and to income differentials between neighbourhoods in the fixing of user charges and in the choice of the billing method is contributing to spatial inequalities in service delivery. Furthermore, the study suggests that these practices are linked to a broader issue, a failure of the government to see the people as partners. It therefore calls for more inclusive governance especially in decision-making processes. The study also emphasizes the need for a policy document on solid waste management, as this would encourage a critical assessment of vital issues including how privatization is to be funded, especially in low-income areas.

Extended producer responsibility for consumer waste: the gap between economic theory and implementation

Although economic theory supports the use of extended producer responsibility (EPR) to stimulate prevention and recycling of waste, EPR systems implemented in Europe are often criticized as a result of weak incentives for prevention and green product design. Using a stylized economic model, this article evaluates the efficiency of European EPR systems. The model reveals that the introduction of static collection targets creates a gap between theory and implementation. Static targets lead to inefficient market outcomes and weak incentives for prevention and green product design. The minimum collection targets should be complemented with a tax on producers for the non-collected waste fraction. Because such a tax internalizes the cost of waste disposal, more efficient price signals will lead to better incentives for waste management in a complex and dynamic market.

Effect of recycling activities on the heating value of solid waste: case study of the Greater Vancouver Regional District (Metro Vancouver)

Two main goals of the integrated solid waste management system (ISWMS) of Metro Vancouver (MV) include further recycling of waste and energy recovery via incineration of waste. These two very common goals, however, are not always compatible enough to fit in an ISWMS depending on waste characteristics and details of recycling programs. This study showed that recent recycling activities in MV have negatively affected the net heating value (NHV) of municipal solid waste (MSW) in this regional district. Results show that meeting MV's goal for additional recycling of MSW by 2015 will further reduce the NHV of waste, if additional recycling activities are solely focused on more extensive recycling of packaging materials (e.g. paper and plastic). It is concluded that 50% additional recycling of paper and plastic in MV will increase the overall recycling rate to 70% (as targeted by the MV for 2015) and result in more than 8% reduction in NHV of MSW. This reduction translates to up to 2.3 million Canadian dollar (CAD$) less revenue at a potential waste-to-energy (WTE) plant with 500 000 tonnes year(-1) capacity. Properly designed recycling programmes, however, can make this functional element of ISWMS compatible with green goals of energy recovery from waste. Herein an explanation of how communities can increase their recycling activities without affecting the feasibility of potential WTE projects is presented.

Solid waste management in Croatia in response to the European Landfill Directive

The European Landfill Directive 99/31/EC represents the most influential piece of waste legislation on the management of municipal solid waste. In addition to technical standards regarding the design and location of landfills, it calls for a decrease in the amount of biodegradable waste landfilled. In order to meet the reduction targets set in the Landfill Directive, national solid waste strategies need to be changed. This article outlines the impact of the Landfill Directive on the Croatian waste management strategy and discusses the key challenges of its implementation. In addition, three scenarios of future waste management (mechanical biological pre-treatment, waste-to-energy and landfilling) have been investigated and evaluated regarding environmental impacts and affordability. The results of the analysis show that Croatia has transposed the said Directive into its own legislation in an exemplary way. The developed national waste management strategy foresees the set up of a separate collection of recyclables, waste pre-treatment of MSW, as well as the upgrading of existing disposal sites to sanitary landfills. However, the practical progress of carrying out provisions implemented on paper is lagging behind. Concerning the investigated scenarios the results of the evaluation indicate that mechanical biological pre-treatment in conjunction with separate collection of recyclables appears to be the most feasible option (in terms of economic and ecologic parameters). This result is in line with the proposed national waste management strategy.