Human Ocular Angiogenesis-Inspired Vascular Models on an Injection-Molded Microfluidic Chip

Angiogenic sprouting, which is the growth of new blood vessels from pre-existing vessels, is orchestrated by cues from the cellular microenvironment, such as spatially controlled gradients of angiogenic factors. However, current in vitro models are less scalable for in-depth studies of angiogenesis. In this study, a plastic-based microfluidic chip is developed to reconstruct in vitro 3D vascular networks. The main disadvantages of the preexisting system are identified, namely, the low productivity and difficulty of experiments, and a breakthrough is suggested while minimizing disadvantages. The selection of plastic materials contributes to the productivity and usability of in vitro devices. By adopting this material, this chip offers simple fluid patterning, facilitating the construction of a cell-culture microenvironment. Compared with previous systems, the chip, which can form both inward and outwardly radial vascular sprouting, demonstrates the growth of functional, morphologically integral microvessels. The developed angiogenic model yields dose-dependent results for antiangiogenic drug screening. This model may contribute significantly not only to vascular studies under normal and pathological conditions, but also to fundamental research on the ocular neovascularization. Furthermore, it can be applied as a tool for more practical, extended preclinical research, providing an alternative to animal experiments.

Microfluidics-based skin irritation test using in vitro 3D angiogenesis platform

A global ban on animal experiments has been proposed. Hence, it is imperative to develop alternative models. Artificial skin models should reflect the responses of subcutaneous blood vessels and the immune system to elucidate disease and identify cosmetics' base materials. Notably, in vivo skin-irritation cascades involve disruption of the epidermal barrier and the release of proinflammatory mediators in response to chemical stimuli. Such proinflammatory factors promote angiogenesis and blood vessel permeability, as observed in irritant contact dermatitis. As an alternative to animal models, we propose a novel skin-irritation model based on a three-dimensional in vitro angiogenesis platform, in which irritated keratinocytes biochemically stimulate vascular endothelial growth factors. Our microfluidic platform hosts interactions between keratinocytes and dermal fibroblasts, which promote angiogenic sprouting. We use sodium lauryl sulfate (SLS) and steartrimonium chloride (SC) as chemical irritants. The irritative effects of SLS and SC are of particular interest due to the ubiquity of both SLS and SC in cosmetics. SLS was observed to significantly affect angiogenic performance, with increasing sprout length. Further promotion of vessel sprouting and lumen formation was observed with 10, 20, and 60 μM of SC, despite its classification as nonirritating and use in supposedly safe formulations. This platform provides an alternative to animal testing as a basis for testing cosmetics and pharmaceutical substances, in addition to serving as a disease model for irritant contact dermatitis.

3D Microfluidic Bone Tumor Microenvironment Comprised of Hydroxyapatite/Fibrin Composite

Bone is one of the most common sites of cancer metastasis, as its fertile microenvironment attracts tumor cells. The unique mechanical properties of bone extracellular matrix (ECM), mainly composed of hydroxyapatite (HA) affect a number of cellular responses in the tumor microenvironment (TME) such as proliferation, migration, viability, and morphology, as well as angiogenic activity, which is related to bone metastasis. In this study, we engineered a bone-mimetic microenvironment to investigate the interactions between the TME and HA using a microfluidic platform designed for culturing tumor cells in 3D bone-mimetic composite of HA and fibrin. We developed a bone metastasis TME model from colorectal cancer (SW620) and gastric cancer (MKN74) cells, which has very poor prognosis but rarely been investigated. The microfluidic platform enabled straightforward formation of 3D TME composed the hydrogel and multiple cell types. This facilitated monitoring of the effect of HA concentration and culture time on the TME. In 3D bone mimicking culture, we found that HA rich microenvironment affects cell viability, proliferation and cancer cell cytoplasmic volume in a manner dependent on the different metastatic cancer cell types and culture duration indicating the spatial heterogeneity (different origin of metastatic cancer) and temporal heterogeneity (growth time of cancer) of TME. We also found that both SW620 and MKN72 cells exhibited significantly reduced migration at higher HA concentration in our platform indicating inhibitory effect of HA in both cancer cells migration. Next, we quantitatively analyzed angiogenic sprouts induced by paracrine factors that secreted by TME and showed paracrine signals from tumor and stromal cell with a high HA concentration resulted in the formation of fewer sprouts. Finally we reconstituted vascularized TME allowing direct interaction between angiogenic sprouts and tumor-stroma microspheroids in a bone-mimicking microenvironment composing a tunable HA/fibrin composite. Our multifarious approach could be applied to drug screening and mechanistic studies of the metastasis, growth, and progression of bone tumors.

Engineering tumor vasculature on an injection-molded plastic array 3D culture (IMPACT) platform

Recent advances in microfluidic organ-on-a-chip technology have enabled the growth of 3D microphysiological systems for diverse biological studies. Fabrication and usage limitations inherent to conventional soft lithographic polydimethylsiloxane (PDMS) based microfluidic platforms drive demands for more accessible, standardized, and mass producible platforms for wider applications. Here, we introduce a novel injection-molded plastic array 3D culture (IMPACT) platform, a microfluidic system designed for easy and diverse patterning of 3D cellular hydrogel. The flexibility of the IMPACT platform enabled simultaneous high-content morphological profiling of the effect of nine different types of tumor cells on vascular formation. Moreover, screening of three different known anti-tumor drugs (5-FU, axitinib and cetuximab) was done at various delivered dosages. We observed distinct and expected molecular mechanism dependent response on both tumor and vasculature in response to treatment, confirming the applicability of the IMPACT as high-content drug testing tool. Therefore, we propose IMPACT as the next generation of 3D microfluidic co-culture platform compatible with any biological, clinical, and pharmaceutical investigations requiring robust high-throughput and high-content assays.

High-Throughput Microfluidic 3D Cytotoxicity Assay for Cancer Immunotherapy (CACI-IMPACT Platform)

Adoptive cell transfer against solid tumors faces challenges to overcome tumor microenvironment (TME), which plays as a physical barrier and provides immuno-suppressive conditions. Classical cytotoxicity assays are widely used to measure killing ability of the engineered cytotoxic lymphocytes as therapeutics, but the results cannot represent the performance in clinical application due to the absence of the TME. This paper describes a 3D cytotoxicity assay using an injection molded plastic array culture (CACI-IMPACT) device for 3D cytotoxicity assay to assess killing abilities of cytotoxic lymphocytes in 3D microenvironment through a spatiotemporal analysis of the lymphocytes and cancer cells embedded in 3D extra cellular matrix (ECM). Rail-based microfluidic design was integrated within a single 96-well and the wells were rectangularly arrayed in 2 × 6 to enhance the experimental throughput. The rail-based microstructures facilitate hydrogel patterning with simple pipetting so that hydrogel pre-solution aspirated with 10 μl pipette can be patterned in 10 wells within 30 s. To demonstrate 3D cytotoxicity assay, we patterned HeLa cells encapsulated by collagen gel and observed infiltration, migration and cytotoxic activity of NK-92 cells against HeLa cells in the collagen matrix. We found that 3D ECM significantly reduced migration of cytotoxic lymphocytes and access to cancer cells, resulting in lower cytotoxicity compared with 2D assays. In dense ECM, the physical barrier function of the 3D matrix was enhanced, but the cytotoxic lymphocytes effectively killed cancer cells once they contacted with cancer cells. The results implied ECM significantly influences migration and cytotoxicity of cytotoxic lymphocytes. Hence, the CACI-IMPACT platform, enabling high-throughput 3D co-culture of cytotoxic lymphocyte with cancer cells, has the potential to be used for pre-clinical evaluation of cytotoxic lymphocytes engineered for immunotherapy against solid tumors.

Piezo1 incorporates mechanical force signals into the genetic program that governs lymphatic valve development and maintenance

The lymphatic system plays crucial roles in tissue homeostasis, lipid absorption, and immune cell trafficking. Although lymphatic valves ensure unidirectional lymph flows, the flow itself controls lymphatic valve formation. Here, we demonstrate that a mechanically activated ion channel Piezo1 senses oscillating shear stress (OSS) and incorporates the signal into the genetic program controlling lymphatic valve development and maintenance. Time-controlled deletion of Piezo1 using a pan-endothelial Cre driver (Cdh5[PAC]-CreERT2) or lymphatic-specific Cre driver (Prox1-CreERT2) equally inhibited lymphatic valve formation in newborn mice. Furthermore, Piezo1 deletion in adult lymphatics caused substantial lymphatic valve degeneration. Piezo1 knockdown in cultured lymphatic endothelial cells (LECs) largely abrogated the OSS-induced upregulation of the lymphatic valve signature genes. Conversely, ectopic Piezo1 overexpression upregulated the lymphatic valve genes in the absence of OSS. Remarkably, activation of Piezo1 using chemical agonist Yoda1 not only accelerated lymphatic valve formation in animals, but also triggered upregulation of some lymphatic valve genes in cultured LECs without exposure to OSS. In summary, our studies together demonstrate that Piezo1 is the force sensor in the mechanotransduction pathway controlling lymphatic valve development and maintenance, and Piezo1 activation is a potentially novel therapeutic strategy for congenital and surgery-associated lymphedema.

Optogenetic stimulation promotes Schwann cell proliferation, differentiation, and myelination in vitro

Schwann cells (SCs) constitute a crucial element of the peripheral nervous system, by structurally supporting the formation of myelin and conveying vital trophic factors to the nervous system. However, the functions of SCs in developmental and regenerative stages remain unclear. Here, we investigated how optogenetic stimulation (OS) of SCs regulates their development. In SC monoculture, OS substantially enhanced SC proliferation and the number of BrdU⁺-S100ß⁺-SCs over time. In addition, OS also markedly promoted the expression of both Krox20 and myelin basic protein (MBP) in SC culture medium containing dBcAMP/NRG1, which induced differentiation. We found that the effects of OS are dependent on the intracellular Ca²⁺ level. OS induces elevated intracellular Ca²⁺ levels through the T-type voltage-gated calcium channel (VGCC) and mobilization of Ca²⁺ from both inositol 1,4,5-trisphosphate (IP₃)-sensitive stores and caffeine/ryanodine-sensitive stores. Furthermore, we confirmed that OS significantly increased expression levels of both Krox20 and MBP in SC-motor neuron (MN) coculture, which was notably prevented by pharmacological intervention with Ca²⁺. Taken together, our results demonstrate that OS of SCs increases the intracellular Ca²⁺ level and can regulate proliferation, differentiation, and myelination, suggesting that OS of SCs may offer a new approach to the treatment of neurodegenerative disorders.

Magnetic Nanoparticle-Embedded Hydrogel Sheet with a Groove Pattern for Wound Healing Application

Endothelial progenitor cells (EPCs) can induce a pro-angiogenic response during tissue repair. Recently, EPC transplantations have been widely investigated in wound healing applications. To maximize the healing efficacy by EPCs, a unique scaffold design that allows cell retention and function would be desirable for in situ delivery. Herein, we fabricated an alginate/poly-l-ornithine/gelatin (alginate-PLO-gelatin) hydrogel sheet with a groove pattern for use as a cell delivery platform. In addition, we demonstrate the topographical modification of the hydrogel sheet surface with a groove pattern to modulate cell proliferation, alignment, and elongation. We report that the patterned substrate prompted morphological changes of endothelial cells, increased cell-cell interaction, and resulted in the active secretion of growth factors such as PDGF-BB. Additionally, we incorporated magnetic nanoparticles (MNPs) into the patterned hydrogel sheet for the magnetic field-induced transfer of cell-seeded hydrogel sheets. As a result, enhanced wound healing was observed via efficient transplantation of the EPCs with an MNP-embedded patterned hydrogel sheet (MPS). Finally, enhanced vascularization and dermal wound repair were observed with EPC seeded MPS.

Optimal diameter reduction ratio of acinar airways in human lungs

In the airway network of a human lung, the airway diameter gradually decreases through multiple branching. The diameter reduction ratio of the conducting airways that transport gases without gas exchange is 0.79, but this reduction ratio changes to 0.94 in acinar airways beyond transitional bronchioles. While the reduction in the conducting airways was previously rationalized on the basis of Murray’s law, our understanding of the design principle behind the acinar airways has been far from clear. Here we elucidate that the change in gas transfer mode is responsible for the transition in the diameter reduction ratio. The oxygen transfer rate per unit surface area is maximized at the observed geometry of acinar airways, which suggests the minimum cost for the construction and maintenance of the acinar airways. The results revitalize and extend the framework of Murray’s law over an entire human lung.

3D Microfluidic Bone Tumor Microenvironment Comprised of Hydroxyapatite/Fibrin Composite

Bone is one of the most common sites of cancer metastasis, as its fertile microenvironment attracts tumor cells. The unique mechanical properties of bone extracellular matrix (ECM), mainly composed of hydroxyapatite (HA) affect a number of cellular responses in the tumor microenvironment (TME) such as proliferation, migration, viability, and morphology, as well as angiogenic activity, which is related to bone metastasis. In this study, we engineered a bone-mimetic microenvironment to investigate the interactions between the TME and HA using a microfluidic platform designed for culturing tumor cells in 3D bone-mimetic composite of HA and fibrin. We developed a bone metastasis TME model from colorectal cancer (SW620) and gastric cancer (MKN74) cells, which has very poor prognosis but rarely been investigated. The microfluidic platform enabled straightforward formation of 3D TME composed the hydrogel and multiple cell types. This facilitated monitoring of the effect of HA concentration and culture time on the TME. In 3D bone mimicking culture, we found that HA rich microenvironment affects cell viability, proliferation and cancer cell cytoplasmic volume in a manner dependent on the different metastatic cancer cell types and culture duration indicating the spatial heterogeneity (different origin of metastatic cancer) and temporal heterogeneity (growth time of cancer) of TME. We also found that both SW620 and MKN72 cells exhibited significantly reduced migration at higher HA concentration in our platform indicating inhibitory effect of HA in both cancer cells migration. Next, we quantitatively analyzed angiogenic sprouts induced by paracrine factors that secreted by TME and showed paracrine signals from tumor and stromal cell with a high HA concentration resulted in the formation of fewer sprouts. Finally we reconstituted vascularized TME allowing direct interaction between angiogenic sprouts and tumor-stroma microspheroids in a bone-mimicking microenvironment composing a tunable HA/fibrin composite. Our multifarious approach could be applied to drug screening and mechanistic studies of the metastasis, growth, and progression of bone tumors.

High-Throughput Microfluidic 3D Cytotoxicity Assay for Cancer Immunotherapy (CACI-IMPACT Platform)

Adoptive cell transfer against solid tumors faces challenges to overcome tumor microenvironment (TME), which plays as a physical barrier and provides immuno-suppressive conditions. Classical cytotoxicity assays are widely used to measure killing ability of the engineered cytotoxic lymphocytes as therapeutics, but the results cannot represent the performance in clinical application due to the absence of the TME. This paper describes a 3D cytotoxicity assay using an injection molded plastic array culture (CACI-IMPACT) device for 3D cytotoxicity assay to assess killing abilities of cytotoxic lymphocytes in 3D microenvironment through a spatiotemporal analysis of the lymphocytes and cancer cells embedded in 3D extra cellular matrix (ECM). Rail-based microfluidic design was integrated within a single 96-well and the wells were rectangularly arrayed in 2 × 6 to enhance the experimental throughput. The rail-based microstructures facilitate hydrogel patterning with simple pipetting so that hydrogel pre-solution aspirated with 10 μl pipette can be patterned in 10 wells within 30 s. To demonstrate 3D cytotoxicity assay, we patterned HeLa cells encapsulated by collagen gel and observed infiltration, migration and cytotoxic activity of NK-92 cells against HeLa cells in the collagen matrix. We found that 3D ECM significantly reduced migration of cytotoxic lymphocytes and access to cancer cells, resulting in lower cytotoxicity compared with 2D assays. In dense ECM, the physical barrier function of the 3D matrix was enhanced, but the cytotoxic lymphocytes effectively killed cancer cells once they contacted with cancer cells. The results implied ECM significantly influences migration and cytotoxicity of cytotoxic lymphocytes. Hence, the CACI-IMPACT platform, enabling high-throughput 3D co-culture of cytotoxic lymphocyte with cancer cells, has the potential to be used for pre-clinical evaluation of cytotoxic lymphocytes engineered for immunotherapy against solid tumors.

Overproduction of recombinant E. coli malate synthase enhances Chlamydomonas reinhardtii biomass by upregulating heterotrophic metabolism

High uptake of malate and efficient distribution of intracellular malate to organelles contributed to biomass increase, reducing maintenance energy. In this study, transgenic Chlamydomonas reinhardtii was developed that stably expresses malate synthase in the chloroplast. The strains under glyoxylate treatment showed 19% more increase in microalgal biomass than wild-type. By RNA analysis, transcript levels of malate dehydrogenase (MDH4) and acetyl-CoA synthetase (ACS3), isocitrate lyase (ICL1) and malate synthase (MAS1), were significantly more expressed (17%, 42%, 24%, and 18% respectively), which was consistent with reported heterotrophic metabolism flux analysis with the objective function maximizing biomass. Photosynthetic F_v/F_m was slightly reduced. A more meticulous analysis is necessary, but, in the transgenic microalgae with malate synthase overexpression, the metabolism is likely to more rely on heterotrophic energy production via TCA cycle and glyoxylate shunt than on photosynthesis, resulting in the increase in microalgal biomass.

PDMS Sylgard 527-Based Freely Suspended Ultrathin Membranes Exhibiting Mechanistic Characteristics of Vascular Basement Membranes

In the past, significant effort has been made to develop ultrathin membranes exhibiting physiologically relevant mechanical properties, such as thickness and elasticity of native basement membranes. However, most of these fabricated membranes have a relatively high elastic modulus, ∼MPa-GPa, relevant only to retinal and epithelial basement membranes. Vascular basement membranes exhibiting relatively low elastic modulus, ∼kPa, on the contrary, have seldom been mimicked. Membranes demonstrating high compliance, with moduli ranging in ∼kPa along with sub-microscale thicknesses have rarely been reported, and would be ideal to mimic vascular basement membranes in vitro. To address this, we fabricate ultrathin membranes demonstrating the mechanistic features exhibited by their vascular biological counterparts. Salient features of the fabricated ultrathin membranes include free suspension, physiologically relevant thickness ∼sub-micrometers, relatively low modulus ∼kPa, and sufficiently large culture area ∼20 mm². To fabricate such ultrathin membranes, undiluted PDMS Sylgard 527 was utilized as opposed to the conventional diluted polymer-solvent mixture approach. In addition, the necessity to have a sacrificial layer for releasing membranes from the underlying substrates was also eliminated in our approach. The novelty of our work lies in achieving the distinct combination of membranes having thickness in sub-micrometers and the associated elasticity in kilopascal using undiluted polymer, which past approaches with dilution have not been able to accomplish. The ultrathin membranes with average thickness of 972 nm (thick) and 570 nm (thin) were estimated to have an elastic modulus of 45 and 214 kPa, respectively. Contact angle measurements revealed the ultrathin membranes exhibited hybrophobic characteristics in unpeeled state and transformed to hydrophilic behavior when freely suspended. Human umbilical vein endothelial cells were cultured on the polymeric ultrathin membranes, and the temporal cell response to change in local compliance of the membranes was studied by evaluating the cell spread area, density, percentage area coverage, and spread rate. After 24 h, single cells, pairs, and group of three to four cells were noticed on highly compliant thick membranes, having average thickness of 972 nm and modulus of 45 kPa. On the contrary, the cell monolayer was noted on the glass slide acting as a control. For the thin membranes featuring average thickness of 570 nm and modulus of 214 kPa, the cells tend to exhibit response similar to that on control with initiation of monolayer formation. Our results indicate, the local compliance, in turn, the membrane thickness governs the cell behavior and this can have vital implications during disease initiation and progression, wound healing, and cancer cell metastasis.

Development of a functional airway-on-a-chip by 3D cell printing

We used 3D cell printing to emulate an airway coupled with a naturally-derived blood vessel network in vitro. Decellularized extracellular matrix bioink derived from porcine tracheal mucosa (tmdECM) was used to encapsulate and print endothelial cells and fibroblasts within a designated polycarprolactone (PCL) frame. Providing a niche that emulates conditions in vivo, tmdECM gradually drives endothelial re-orientation, which leads to the formation of a lumen and blood vessel network. A fully-differentiated in vitro airway model was assembled with the printed vascular platform, and collectively reproduced a functional interface between the airway epithelium and the vascular network. The model presented respiratory symptoms including asthmatic airway inflammation and allergen-induced asthma exacerbation in physiological context. Because of the adaptable and automated nature of direct 3D cell printing, we expect that this will have relevance in vivo and high reproducibility for production of high-content platforms for preclinical trials in biomedical research.

Multiple roles of lymphatic vessels in peripheral lymph node development

This work shows how blood and lymphatic vessels contribute to lymph node organogenesis. Both vessel types transport lymphoid tissue inducer cells, while lymphatics also generate interstitial flow, important for mechanical stromal activation and further lymph node expansion.

The mammalian lymphatic system consists of strategically located lymph nodes (LNs) embedded into a lymphatic vascular network. Mechanisms underlying development of this highly organized system are not fully understood. Using high-resolution imaging, we show that lymphoid tissue inducer (LTi) cells initially transmigrate from veins at LN development sites using gaps in venous mural coverage. This process is independent of lymphatic vasculature, but lymphatic vessels are indispensable for the transport of LTi cells that egress from blood capillaries elsewhere and serve as an essential LN expansion reservoir. At later stages, lymphatic collecting vessels ensure efficient LTi cell transport and formation of the LN capsule and subcapsular sinus. Perinodal lymphatics also promote local interstitial flow, which cooperates with lymphotoxin-β signaling to amplify stromal CXCL13 production and thereby promote LTi cell retention. Our data unify previous models of LN development by showing that lymphatics intervene at multiple points to assist LN expansion and identify a new role for mechanical forces in LN development.

Design rules for a tunable merged-tip microneedle

This publication proposes the use of an elasto-capillarity-driven self-assembly for fabricating a microscale merged-tip structure out of a variety of biocompatible UV-curable polymers for use as a microneedle platform. In addition, the novel merged-tip microstructure constitutes a new class of microneedles, which incorporates the convergence of biocompatible polymer micropillars, leading to the formation of a sharp tip and an open cavity capable of both liquid trapping and volume control. When combined with biocompatible photopolymer micropillar arrays fabricated with photolithography, elasto-capillarity-driven self-assembly provides a means for producing a complex microneedle-like structure without the use of micromolding or micromachining. This publication also explores and defines the design rules by which several fabrication aspects, such as micropillar dimensions, shapes, pattern array configurations, and materials, can be manipulated to produce a customizable microneedle array with controllable cavity volumes, fracture points, and merge profiles. In addition, the incorporation of a modular through-hole micropore membrane base was also investigated as a method for constitutive payload delivery and fluid-sampling functionalities. The flexibility and fabrication simplicity of the merged-tip microneedle platform holds promise in transdermal drug delivery applications.

Microfluidic-based vascularized microphysiological systems

Microphysiological systems have emerged in the last decade to provide an alternative to in vivo models in basic science and pharmaceutical research. In the field of vascular biology, in particular, there has been a lack of a suitable in vitro model exhibiting a three-dimensional structure and the physiological function of vasculature integrated with organ-on-a-chip models. The rapid development of organ-on-a-chip technology is well positioned to fulfill unmet needs. Recently, functional integration of vasculature with diverse microphysiological systems has been increasing. This recent trend corresponds to emerging research interest in how the vascular system contributes to various physiological and pathological conditions. This innovative platform has undergone significant development, but adoption of this technology by end-users and researchers in biology is still a work in progress. Therefore, it is critical to focus on simplification and standardization to promote the distribution and acceptance of this technology by the end-users. In this review, we will introduce the latest developments in vascularized microphysiological systems and summarize their outlook in basic research and drug screening applications.

Microfluidics within a well: an injection-molded plastic array 3D culture platform

Polydimethylsiloxane (PDMS) has been widely used in fabricating microfluidic devices for prototyping and proof-of-concept experiments. Due to several material limitations, PDMS has not been widely adopted for commercial applications that require large-scale production. This paper describes a novel injection-molded plastic array 3D culture (IMPACT) platform that incorporates a microfluidic design to integrate patterned 3D cell cultures within a single 96-well (diameter = 9 mm) plate. Cell containing gels can be sequentially patterned by capillary-guided flow along the corner and narrow gaps designed within the 96-well form factor. Compared to PDMS-based hydrophobic burst valve designs, this work utilizes hydrophilic liquid guides to obtain rapid and reproducible patterned gels for co-cultures. When a liquid droplet (i.e. cell containing fibrin or collagen gel) is placed on a corner, spontaneous patterning is achieved within 1 second. Optimal dimensionless parameters required for successful capillary loading have been determined. To demonstrate the utility of the platform for 3D co-culture, angiogenesis experiments were performed by patterning HUVEC (human umbilical endothelial cells) and LF (lung fibroblasts) embedded in 3D fibrin gels. The angiogenic sprouts (with open lumen tip cells expressing junctional proteins) are comparable to those observed in PDMS based devices. The IMPACT device has the potential to provide a robust high-throughput experimental platform for vascularized microphysiological systems.

Investigation on vascular cytotoxicity and extravascular transport of cationic polymer nanoparticles using perfusable 3D microvessel model

Vascular networks are the first sites exposed to cationic polymer nanoparticles (NPs) administered intravenously, and thus function as a barrier for NPs reaching the target organ. While cationic polymer NPs have been intensively studied as non-viral delivery systems, their biological effects in human microvessels have been poorly investigated due to a lack of appropriate in vitro systems. Here, we employed a three-dimensional microvessel on a chip, which accurately models in vivo conditions. An open and perfused microvessel surrounded by pericytes was shown to reproduce the important features of living vasculature, including barrier function and biomarkers. Using this microvessel chip, we observed contraction of the microvascular lumen induced by perfused polyethylenimine (PEI)/DNA NPs. We demonstrated that the oxidative stress present when microvessels were exposed to PEI NPs led to rearrangement of microtubules resulting in microvessel contraction. Furthermore, the transcytotic behavior of PEI NPs was analyzed in the microvessel by monitoring the escape of PEI NPs from the microvascular lumen into the perivascular region, which was not possible in two-dimensional culture systems. With our new understanding of the different behaviors of cationic polymer NPs depending on their transcytotic route, we suggest that caveolae-mediated transcytosis is a powerful route for efficient extravascular transport.

STATEMENT OF SIGNIFICANCE

Microvascular networks are not only biological system constituting largest surface area in the body and but also first site exposed to nanoparticle in vivo. While cationic polymer NPs have been intensively studied as non-viral delivery systems, its biological effects in human microvessel have been poorly investigated due to lack of appropriate in vitro systems. Here, we microengineered an open and perfused 3D pericyte incorporated microvessel model which possesses same morphological characteristic of in vivo. Using the microengineered model, this study represents the first report of transcytotic behavior of NPs in 3D microvessel, and its effect on extravasation efficiency. Our study lays the groundwork for the integration of innovative technologies to examine blood vessel-nanoparticle interaction, which a critical but ill-defined phenomenon.

Integrated Platform for Monitoring Single-cell MAPK Kinetics in Computer-controlled Temporal Stimulations

Extracellular response kinase (ERK) is one of the key regulator of cell fate, such as proliferation, differentiation and cell migration. Here, we propose a novel experimental pipeline to learn ERK kinetics by temporal growth factor (GF) stimulation. High signal-to-noise ratio of genetically encoded Fluorescence resonance energy transfer (FRET) biosensor enables to get a large number of single-cell ERK activity at each time point, while computer-controlled microfluidics fine-tune the temporal stimulation. Using this platform, we observed that static Epidermal growth factor (EGF) stimulation led to transient ERK activation with a significant cell-to-cell variation, while dynamic stimulation of 3′ EGF pulse led to faster adaptation kinetics with no discrepancy. Multiple EGF pulses retriggered ERK activity with respect to frequency of stimulation. We also observed oscillation of ERK activity of each cell at basal state. Introducing of Mitogen-activated protein kinase kinase (MEK) inhibitor, U0126, was not only dropping the average of basal activity for 7.5%, but also diminishing oscillatory behavior. Activity level raised up when inhibitor was removed, followed by transient peak of ERK kinetics. We expect this platform to probe Mitogen-associated protein kinase (MAPK) signaling network for systems biology research at single cellular level.

Microstructure guided multi-scale liquid patterning on an open surface

Liquid patterning is a quintessential aspect in cell-based screening. While there are a variety of methods to handle microliquids utilizing surface treatments, complex microfluidic systems, and automated dispensing, most of the stated methods are both expensive and difficult to implement. Here, we present a fast multi-scale microliquid-patterning method on an open surface using embossed microstructures without surface modification. Arrays of micropillars can trap microliquids when a bulk drop is swept by an elastic sweeper on polystyrene (PS) substrates. The patterning mechanism on a basic form of a 2 × 2 rectangular array of circular pillars is analyzed theoretically and verified with experiments. Nanoliter-to-microliter volumes of liquids are patterned into various shapes by arranging the pillars based on the analysis. Furthermore, an array of geometrically modified pillars can capture approximately 8000 droplets on a large substrate (55 mm × 55 mm) in one step. Given the simplistic method of wipe patterning, the proposed platform can be utilized in both manual benchtop and automated settings. We will provide proof of concept experiments of single colony isolation using nanoliter-scale liquid patterning and of human angiogenic vessel formation using sequential patterning of microliter-scale liquids.

The Schwann Cell as an Active Synaptic Partner

The schwann cells of the peripheral nervous system are indispensable for the formation, maintenance, and modulation of synapses over the life cycle. They not only recognize neuron-glia signaling molecules, but also secrete gliotransmitters. Through these processes, they regulate neuronal excitability and thus the release of neurotransmitters from the nerve terminal at the neuromuscular junction. Gliotransmitters strongly affect nerve communication, and their secretion is mainly triggered by synchronized Ca²⁺ signaling, implicating Ca²⁺ waves in synapse function. Reciprocally, neurotransmitters released during synaptic activity can evoke increases in intracellular Ca²⁺ levels. A reconsideration of the interplay between the two main types of cells in the nervous system is due, as the concept of nervous system activity comprising only neuron-neuron and neuron-muscle action has become untenable. A more precise understanding of the roles of schwann cells in nerve-muscle signaling is required.

Vibration-induced stress priming during seed culture increases microalgal biomass in high shear field-cultivation

Vibrational wave treatment has been used to increase proliferation of microalgae. When directly applied at large scale, however, turbulence can offset positive effects of vibration on microalgae proliferation. Moreover, severe hydrodynamic shear fields in the bioreactor decrease cell viability that detrimentally influence maximum yieldable biomass. In this study, vibration pretreatment (between 10-30 Hz and 0.15-0.45 G) was used to prime the cells for enhanced biomass. When exposed to 10 Hz at 0.15 G for 72 h and inoculated in baffled flasks of large shear fields (0.292 Pa for the average wall shear force (aveWSF) and 184 s^-1 for the average shear strain rate (aveSSR)), microalgae showed 27% increase in biomass as well as 39% increase in corresponding amount of heterologous protein (i.e. GFP-3HA). Our results show that stress primed microalgae with vibrations can lead to improved proliferation that results in increased biomass production at industrial scale bioprocesses.

Microfluidics in nanoparticle drug delivery; From synthesis to pre-clinical screening

Microfluidic technologies employ nano and microscale fabrication techniques to develop highly controllable and reproducible fluidic microenvironments. Utilizing microfluidics, lead compounds can be produced with the controlled physicochemical properties, characterized in a high-throughput fashion, and evaluated in in vitro biomimetic models of human organs; organ-on-a-chip. As a step forward from conventional in vitro culture methods, microfluidics shows promise in effective preclinical testing of nanoparticle-based drug delivery. This review presents a curated selection of state-of-the-art microfluidic platforms focusing on the fabrication, characterization, and assessment of nanoparticles for drug delivery applications. We also discuss the current challenges and future prospects of nanoparticle drug delivery development using microfluidics.

Relationship between Pericytes and Endothelial Cells in Retinal Neovascularization: A Histological and Immunofluorescent Study of Retinal Angiogenesis

Purpose

To evaluate the relationship between pericytes and endothelial cells in retinal neovascularization through histological and immunofluorescent studies.

Methods

C57BL/6J mice were exposed to hyperoxia from postnatal day (P) 7 to P12 and were returned to room air at P12 to induce a model of oxygen-induced retinopathy (OIR). The cross sections of enucleated eyes were processed with hematoxylin and eosin. Immunofluorescent staining of pericytes, endothelial cells, and N-cadherin was performed. Microfluidic devices were fabricated out of polydimethylsiloxane using soft lithography and replica molding. Human retinal microvascular endothelial cells, human brain microvascular endothelial cells, human umbilical vein endothelial cells and human placenta pericyte were mixed and co-cultured.

Results

Unlike the three-layered vascular plexus found in retinal angiogenesis of a normal mouse, angiogenesis in the OIR model is identified by the neovascular tuft extending into the vitreous. Neovascular tufts and the three-layered vascular plexus were both covered with pericytes in the OIR model. In this pathologic vascularization, N-cadherin, known to be crucial intercellular adhesion molecule, was also present. Further evaluation using the microfluidic in vitro model, successfully developed a microvascular network of endothelial cells covered with pericytes, mimicking normal retinal angiogenesis within 6 days.

Conclusions

Pericytes covering endothelial cells were observed not only in vasculature of normal retina but also pathologic neovascularization of OIR mouse at P17. Factors involved in the endothelial cell-pericyte interaction can be evaluated as an attractive novel treatment target. These future studies can be performed using microfluidic systems, which can shorten the study time and provide three-dimensional structural evaluation.

Synthesis of Fluorescent Au Nanocrystals-Silica Hybrid Nanocomposite (FLASH) with Enhanced Optical Features for Bioimaging and Photodynamic Activity

Fluorescent Au nanocrystals (AuNCs)-silica hybrid nanocomposite (FLASH) was synthesized by co-condensation of surface-modified AuNCs. Present FLASH nanocomposite exhibited four times the enhanced photoluminescence and photocatalytic activity compared to single nanocrystals. On the basis of these enhanced optical features, we successfully demonstrated in vitro fluorescence bioimaging of introduced FLASH to human cervical cancer cell line (HeLa). Beyond the confirmation of photocatalytic activity from the photodegradation of methylene blue as a model compound, the regional selective photodynamic therapy of HeLa cells under UV irradiation was also presented. Taken together the enhanced optical features and further potential in theranostic applications, we expect that the present FLASH can be a promising tool for nanobiotechnology field.

Liposomal co-delivery-based quantitative evaluation of chemosensitivity enhancement in breast cancer stem cells by knockdown of GRP78/CLU

Resistance to chemotherapy is a key factor in the inefficacy of various forms of treatments for cancer. In the present study, chemo-resistant proteins, including glucose-regulated protein 78 (GRP78)/clusterin (CLU) targeted 1,2-dioleoyloxy-3-trimethylammoniumpropane (DOTAP) liposomes, were developed as a delivery system for co-delivery of camptothecin (CPT) and GRP78 siRNA/CLU siRNA. Their drug/gene co-deliveries were quantitatively assessed in cancer stem cells (CSC) and MCF-7 cells. DOTAP-CPT/siRNA were prepared via electrostatic interaction on GRP78 siRNA or CLU siRNA. The size and ζ-potential of liposomes and lipoplexes were measured by dynamic light scattering techniques and electrophoretic light scattering spectrophotometry. The lipoplexes formation was tested by using gel electrophoresis. Immunofluorescence analysis showed that the expression level of CLU and GRP78 were significantly elevated in CSC compared to MCF-7 cells. Transfection and drug-delivery efficiency of DOTAP-CPT/siRNA were quantitatively compared with Lipofectamine 2000. Compared to free CPT, DOTAP-CPT-siCLU delivery in CSC and MCF-7 cells increased transfection efficiency and chemo-sensitivity by 4.1- and 5.9-fold, respectively. On the other hand, DOTAP-CPT-siGRP78 delivery increased transfection efficiency and chemo sensitivity by 4.4- and 6.2-fold in CSC and MCF-7 cells, respectively, compared to free CPT. It is significant that 3 ± 1.2-fold increase in transfection efficiency was achieved by lipofectamine. Consequently, an increase in anti-cancer/gene silencing efficacy was quantitatively observed as an effect of DOTAP-CPT/siRNA treatment, which was relatively higher than lipofectamine treatment. Conclusively, our experimental data quantitatively demonstrate that using DOTAP-CPT-siRNA specifically targeting (CSCs) chemo-resistant protein in vitro offers substantial potential for synergistic anti-cancer therapy.

Wet-AMD on a Chip: Modeling Outer Blood-Retinal Barrier In Vitro

Choroidal neovascularization (CNV) in the retinal pigment epithelium (RPE)-choroid complex constituting outer blood retinal barrier (oBRB) is a critical pathological step in various ophthalmic diseases, which results in blindness, such as wet type age-related macula degeneration. Current in vitro experimental models using petri dishes or transwell are unable to study CNV morphogenesis. Here, a unique organotypic eye-on-a-chip model is described that mimics the RPE-choroid complex in vitro. This model consists of an RPE monolayer and adjacent perfusable blood vessel network, which is supporting barrier function of oBRB. The intact barrier function of the RPE-choroid complex is reconstituted while maintaining important structural features. Further, this model can successfully mimic the pathogenesis of CNV especially in terms of morphogenesis, which is penetrating angiogenic sprouts from pre-existing choroidal vessels that result in breakdown of RPE monolayer. The alleviation of the pathological angiogenesis can be modeled with bevacizumab, a clinical drug for CNV treatment. It is believed that this model can be used to aid in the development of advanced in vitro eye drug evaluation in conjunction with animal models.

Human eye-inspired soft optoelectronic device using high-density MoS2-graphene curved image sensor array

Soft bioelectronic devices provide new opportunities for next-generation implantable devices owing to their soft mechanical nature that leads to minimal tissue damages and immune responses. However, a soft form of the implantable optoelectronic device for optical sensing and retinal stimulation has not been developed yet because of the bulkiness and rigidity of conventional imaging modules and their composing materials. Here, we describe a high-density and hemispherically curved image sensor array that leverages the atomically thin MoS₂-graphene heterostructure and strain-releasing device designs. The hemispherically curved image sensor array exhibits infrared blindness and successfully acquires pixelated optical signals. We corroborate the validity of the proposed soft materials and ultrathin device designs through theoretical modeling and finite element analysis. Then, we propose the ultrathin hemispherically curved image sensor array as a promising imaging element in the soft retinal implant. The CurvIS array is applied as a human eye-inspired soft implantable optoelectronic device that can detect optical signals and apply programmed electrical stimulation to optic nerves with minimum mechanical side effects to the retina.

Soft and flexible optoelectronic devices may provide effective routes toward retinal implants for enhanced visual functions. Here, the authors fabricate a curved array of flexible MoS₂-graphene photodetectors and demonstrate its potential application as ophthalmic imaging element in mouse models.

Highly Efficient and Rapid Neural Differentiation of Mouse Embryonic Stem Cells Based on Retinoic Acid Encapsulated Porous Nanoparticle

An improved cell conversion strategy for neural differentiation of mouse embryonic stem (mES) cells is developed by incorporating functionalized mesoporous silica nanoparticle (MSN) as an efficient delivery carrier of retinoic acid (RA), which is a pleiotropic factor required for initiation of neural differentiation. Traditional RA-mediated neural differentiation methods required either preactivation of the cells to the differentiating state by embryoid body (EB) formation or repetitive treatment of the differentiation factor. Our modified cell conversion system involves only singular treatment of the RA/MSN complex, which simplified the whole process and accelerated neural induction to be finished within 6 days with high quality. With our new method, neural cells were successfully derived from mES cells with stable expression of neurite marker gene.

"Open-top" microfluidic device for in vitro three-dimensional capillary beds

We introduce a novel microfluidic device to co-culture a blood vessel network and cell tissues in an in vivo-like niche. Our "open-top" microfluidic device is composed of microchannels with micropores in the ceiling, which provides direct fluid access from reservoir to microchannel. Fluid connections through micropores afford novel advantages, including: i) the long-term culture of large-scale microvessel network, ii) access of different fluids to inner and exterior sides of the microvessel, and iii) co-culturing of the microvessel network and small cell tissue. In this study, we have successfully assembled microvessels with 5 mm channel widths. We were also able to mimic capillary bed conditions by co-culturing microvessels with cancer spheroids. Intimate contact between the cancer spheroid and microvessel caused vessel recruitment and an increase in vessel formation, and affected vessel morphology. We expect this device to be used as a novel platform for vascularized tissue models.

A Low Permeability Microfluidic Blood-Brain Barrier Platform with Direct Contact between Perfusable Vascular Network and Astrocytes

A novel three dimensional blood brain barrier (BBB) platform was developed by independently supplying different types of media to separate cell types within a single device. One channel (vascular channel, VC) is connected to the inner lumen of the vascular network while the other supplies media to the neural cells (neural channel, NC). Compared to co-cultures supplied with only one type of medium (or 1:1 mixture), best barrier properties and viability were obtained with culturing HUVECs with endothelial growth medium (EGM) and neural cells with neurobasal medium supplemented with fetal bovine serum (NBMFBS) independently. The measured vascular network permeability were comparable to reported in vivo values (20 kDa FITC-dextran, 0.45 ± 0.11 × 10⁻⁶ cm/s; 70 kDa FITC-dextran, 0.36 ± 0.05 × 10⁻⁶ cm/s) and a higher degree of neurovascular interfacing (astrocytic contact with the vascular network, GFAP-CD31 stain overlap) and presence of synapses (stained with synaptophysin). The BBB platform can dependably imitate the perivascular network morphology and synaptic structures characteristic of the NVU. This microfluidic BBB model can find applications in screening pharmaceuticals that target the brain for in neurodegenerative diseases.

Topography-Guided Control of Local Migratory Behaviors and Protein Expression of Cancer Cells

In vivo cancer cell migration and invasion are directed by biophysical guidance mechanisms such as pre-existing microtracks and basement membrane extracellular matrices. Here, this paper reports the correlation of the local migratory behavior of cancer cells and the biochemical signal expression using the topography that can guide or inhibit cell behaviors. To this end, the local apparent migration and the protein expression level are investigated with respect to the topographical feature size (flat, nanoline, and microline) and orientation (microline, microconcentric, and microradial) with the collectively migrating (A431) and individually migrating (MDA-MB-231 and U-87-MG) cancer cells. The results show that the migration and the protein expression of focal adhesion kinase, rho-associated protein kinase, and extracellular signal-regulated kinase are localized in the periphery of cell colony. Furthermore, the inhibition of migratory behavior at the periphery recues the protein expression, while the guidance of migration enhances the aforementioned protein expression. The results may imply the employ of biophysical inhibitory factors can help to control invasiveness of cancer cells during the progression state.

Biomimetic Model of Tumor Microenvironment on Microfluidic Platform

The "Tumor microenvironment" (TME) is a complex, interacting system of the tumor and its surrounding environment. The TME has drawn more attention recently in attempts to overcome current drug resistance and the recurrence of cancer by understanding the cancer and its microenvironment systematically, beyond past reductionist approaches. However, a lack of experimental tools to dissect the intricate interactions has hampered in-depth research into the TME. Here, a biomimetic TME model using a microfluidic platform is presented, which enables the interaction between TME constituents to be studied in a comprehensive manner. Paracrine interactions of cocultured tumor cell lines (SK-OV-3, MKN-74, and SW620) with primary fibroblasts show marked morphological changes in the tumor cells, depending on the type of tumor cells, and, importantly, the composition of the extracellular matrix. Furthermore, this model allows direct observation of angiogenesis induced by the tumor-stroma interaction. Finally, reconstituting simultaneous angiogenesis and lymphangiogenesis induced by the tumor-stromal interaction with TME mimicking extrinsic factors is enabled. It is believed that the in vitro biomimetic model and the experimental concepts described will help to shed light on the complex biology of the TME.

Quantum-dot nanoprobes and AOTF based cross talk eliminated six color imaging of biomolecules in cellular system

Primary cell cultures mimic the physiology and genetic makeup of in-vivo tissue of origin, nonetheless, a complication in the derivation and propagation of primary cell culture limits its use in biological research. However, in-vitro models using primary cells might be a complement model to mimic in vivo response. But, conventional techniques such as western blot and PCR employed to study the expression and activation of proteins requires a large number of cells, hence repeated establishment and maintenance of primary culture are unavoidable. Quantum dot (Q-dot) and acousto-optic tunable filters (AOTF) based multiplex imaging system is a viable alternative choice to evaluate multiple signaling molecules by using a small number of cells. Q-dots have broad excitation and narrow emission spectra, which allows to simultaneously excite multiple Q-dots by using single excitation wavelength. The use of AOTF in the fluorescence detection system enables to scan the fluorescence emission intensity of a Q-dot at their central wavelength, this phenomenon effectively avoids spectral overlap among the neighboring Q-dots. When Q-dots are conjugated with antibodies it acts as effective sensing probes. To validate this, the expression pattern of p-JNK-1, p-GSK3β, p-IRS1ser, p-IRS1tyr, p-FOXO1, and PPAR-γ, involved in the insulin resistance were concurrently monitored in adipocyte and HepG2 co-cell culture model. The observed results clearly indicate that PPAR-γ is the critical component in the development of insulin resistance. Moreover, the results proved that developed Q-dot based AOTF imaging methodology is a sensible choice to concurrently monitor multiple signaling molecules with limited cell population.

Hybrid polymer microfluidic platform to mimic varying vascular compliance and topology

Several cardiovascular pathologies and aging have been associated with alterations in the mechanical and structural properties of the vascular wall, leading to a reduction in arterial compliance and the development of constriction. In the past, rare efforts have been directed to understand the endothelial cell response to combined mechanical stimuli from fluid flow and substrate rigidity. Recent approaches using microfluidic platforms have limitations in precisely mimicking healthy and diseased vasculature conditions from altered topological and substrate compliance perspectives. To address this, we demonstrated an effective fabrication process to realize a hybrid polymer platform to test these mechanistic features of blood vessels. The salient features of the platform include circular microchannels of varying diameters, variation in substrate rigidity along the channel length, and the coexistence of microchannels with different cross sections on a single platform. The platform demonstrates the combined effects of flow-induced shear forces and substrate rigidity on the endothelial cell layer inside the circular microchannels. The experimental results indicate a pronounced cell response to flow induced shear stress via its interplay with the underlying substrate mechanics.

Microfluidic perfusion bioreactor for optimization of microalgal lipid productivity

Nutrient deprivation in a batch process induces microbes to produce secondary metabolites while drastically constraining cellular growth. A microfluidic continuous perfusion system was designed and tested to culture microalgae, Chlamydomonas reinhardtii, under constant nutrient concentration slightly lower than normal condition. When cultured in 7.5%/7.5% of NH₄⁺/PO₄^2-, C. reinhardtii showed a 2.4-fold increase in TAG production with a 3.5-fold increase in biomass compared to level obtained under an only NH₄⁺ depleted condition. The microfluidic continuous perfusion bioreactor with steady continuous nutrient flow can be used to optimize conditions for enhancing secondary metabolite production and increasing microbial biomass.

Rapid large area fabrication of multiscale through-hole membranes

There are many proposed mechanisms by which single cells can be trapped; among them is the through-hole membrane for the characterization of individual microorganisms. Due to the small scale of the fabricated pores, the construction of through-hole membranes on a large scale and with relatively large areas faces many difficulties. This paper describes novel fabrication methods for a large-area, freestanding micro/nano through-hole membrane constructed from versatile membrane materials using through-hole membranes on a microfluidic chip (THMMC). This process can rapidly (<20 min) fabricate membranes with high fidelity multiscale hole size without residual layers. The through-hole site was easily customizable from the micro to the nanoscale, with a low or high aspect ratio giving rise to reliable membranes. Also, the rigidity and biocompatibility of the through-hole membrane are easily tunable by simple injection of versatile membrane materials to obtain a large area (up to 3600 mm²). Membranes produced in this manner were then applied as a proof of concept for the isolation, cultivation, and quantification of individual micro-algal cells for selection with respect to the growth rate, while controlling the quorum sensing mediated metabolic and proliferative changes.

3D tissue formation by stacking detachable cell sheets formed on nanofiber mesh

We present a novel approach for assembling 3D tissue by layer-by-layer stacking of cell sheets formed on aligned nanofiber mesh. A rigid frame was used to repeatedly collect aligned electrospun PCL (polycaprolactone) nanofiber to form a mesh structure with average distance between fibers 6.4 µm. When human umbilical vein endothelial cells (HUVECs), human foreskin dermal fibroblasts, and skeletal muscle cells (C2C12) were cultured on the nanofiber mesh, they formed confluent monolayers and could be handled as continuous cell sheets with areas 3 × 3 cm² or larger. Thicker 3D tissues have been formed by stacking multiple cell sheets collected on frames that can be nested (i.e. Matryoshka dolls) without any special tools. When cultured on the nanofiber mesh, skeletal muscle, C2C12 cells oriented along the direction of the nanofibers and differentiated into uniaxially aligned multinucleated myotube. Myotube cell sheets were stacked (upto 3 layers) in alternating or aligned directions to form thicker tissue with ∼50 µm thickness. Sandwiching HUVEC cell sheets with two dermal fibroblast cell sheets resulted in vascularized 3D tissue. HUVECs formed extensive networks and expressed CD31, a marker of endothelial cells. Cell sheets formed on nanofiber mesh have a number of advantages, including manipulation and stacking of multiple cell sheets for constructing 3D tissue and may find applications in a variety of tissue engineering applications.

High-Density Single-Layer Coating of Gold Nanoparticles onto Multiple Substrates by Using an Intrinsically Disordered Protein of α-Synuclein for Nanoapplications

Functional graffiti of nanoparticles onto target surface is an important issue in the development of nanodevices. A general strategy has been introduced here to decorate chemically diverse substrates with gold nanoparticles (AuNPs) in the form of a close-packed single layer by using an omni-adhesive protein of α-synuclein (αS) as conjugated with the particles. Since the adsorption was highly sensitive to pH, the amino acid sequence of αS exposed from the conjugates and its conformationally disordered state capable of exhibiting structural plasticity are considered to be responsible for the single-layer coating over diverse surfaces. Merited by the simple solution-based adsorption procedure, the particles have been imprinted to various geometric shapes in 2-D and physically inaccessible surfaces of 3-D objects. The αS-encapsulated AuNPs to form a high-density single-layer coat has been employed in the development of nonvolatile memory, fule-cell, solar-cell, and cell-culture platform, where the outlying αS has played versatile roles such as a dielectric layer for charge retention, a sacrificial layer to expose AuNPs for chemical catalysis, a reaction center for silicification, and biointerface for cell attachment, respectively. Multiple utilizations of the αS-based hybrid NPs, therefore, could offer great versatility to fabricate a variety of NP-integrated advanced materials which would serve as an indispensable component for widespread applications of high-performance nanodevices.

Identification of the First Selective Activin Receptor-Like Kinase 1 Inhibitor, a Reversible Version of L-783277

We synthesized 1 (San78-130), a reversible version of L-783277, as a selective and potent ALK1 inhibitor. Our study showed that 1 possesses great kinase selectivity against a panel of 342 kinases and more potent activity against ALK1 than L-783277. Among the six ALK isotypes (ALK1-6), ALK1 is most significantly inhibited by compound 1. Compound 1 suppresses the BMP9-induced Smad1/5 pathway by mainly inhibiting ALK1 in C2C12 cells. Our molecular dynamics simulations suggest that H-bonding interaction between the C-4' hydroxyl group of 1 and Arg334 of ALK1 substantially contributes to the ALK1 inhibition. To the best of our knowledge, 1 is the first selective ALK1 inhibitor. Furthermore, compound 1 promoted angiogenesis in both endothelial tube formation and microfluidic chip based 3D angiogenesis assays, suggesting that 1 could be a lead compound for therapeutic angiogenesis agents. Our study may provide an insight into designing selective and potent inhibitors against ALK1.

Artificial Slanted Nanocilia Array as a Mechanotransducer for Controlling Cell Polarity

We present a method to induce cell directional behavior using slanted nanocilia arrays. NIH-3T3 fibroblasts demonstrated bidirectional polarization in a rectangular arrangement on vertical nanocilia arrays and exhibited a transition from a bidirectional to a unidirectional polarization pattern when the angle of the nanocilia was decreased from 90° to 30°. The slanted nanocilia guided and facilitated spreading by allowing the cells to contact the sidewalls of the nanocilia, and the directional migration of the cells opposed the direction of the slant due to the anisotropic bending stiffness of the slanted nanocilia. Although the cells recognized the underlying anisotropic geometry when the nanocilia were coated with fibronectin, collagen type I, and Matrigel, the cells lost their directionality when the nanocilia were coated with poly-d-lysine and poly-l-lysine. Furthermore, although the cells recognized geometrical anisotropy on fibronectin coatings, pharmacological perturbation of PI3K-Rac signaling hindered the directional elongation of the cells on both the slanted and vertical nanocilia. Furthermore, myosin light chain II was required for the cells to obtain polarized morphologies. These results indicated that the slanted nanocilia array provided anisotropic contact guidance cues to the interacting cells. The polarization of cells was controlled through two steps: the recognition of underlying geometrical anisotropy and the subsequent directional spreading according to the guidance cues.

Multiplex microfluidic system integrating sequential operations of microalgal lipid production

The unit cost for the production of algal biofuel needs to be reduced in order to be a substitute for fossil fuel. To achieve this goal, the development of a novel system is needed for a rapid screening of numerous microalgal species to isolate superior strains with the highest lipid productivity. Here, we developed a PDMS-based multiplex microfluidic system with eight chambers and micropillar arrays to expedite multiple steps for lipid sample preparation from different microalgal strains. We could rapidly and efficiently perform sequential operations from cell culture to lipid extraction of eight different microalgal strains simultaneously on a single device without harvesting and purification steps, which are labor- and energy-intensive, by the simple injection of medium and solvent into the central inlet due to the integrated micropillar arrays connecting the chambers and central inlet. The lipid extraction efficiency using this system was comparable (94.5-102.6%) to the conventional Bligh-Dyer method. We investigated the cell growth and lipid productivity of different strains using the microfluidic device. We observed that each strain has a different lipid accumulation pattern according to stress conditions. These results demonstrate that our multiplex microfluidic approach can provide an efficient analytical tool for the rapid analysis of strain performances (e.g. cell growth and lipid productivities) and the determination of the optimal lipid induction condition for each strain.

Fabrication of functional 3D multi-level microstructures on transparent substrates by one step back-side UV photolithography

This paper describes simple photolithography-based methods to fabricate multi-level three-dimensional (3D) microstructures without repeated processes using flexible and transparent film substrates such as polyethylene terephthalate (PET).

Microvessels-on-a-Chip to Assess Targeted Ultrasound-Assisted Drug Delivery

Microbubbles have been used in ultrasound-assisted drug delivery to help target solid tumors via blood vessels in vivo; however, studies to understand the phenomena at the cellular level and to optimize parameters for ultrasound or microbubbles in vivo are challenging and expensive to perform. Here, we utilize microfluidic microvessels-on-a-chip that enable visualization of microbubble/ultrasound-dependent drug delivery to microvasculature. When exposed to pulsed ultrasound, microbubbles perfused through microvessels-on-a-chip were observed to stably oscillate. Minimal cellular damage was observed for both microbubbles and untargeted doxorubicin-encapsulating liposomes (DOX-liposomes) perfused through chip microvessels. In contrast, passive and ultrasound-assisted perfusion of integrin-targeted DOX-liposomes induced cytotoxicity, which was only significantly enhanced for ultrasound-assisted perfusion when microbubbles were coperfused. These results suggest that stably oscillating microbubbles enhance targeted DOX-liposome internalization/cytotoxicity largely by stimulating integrin receptor endocytosis. Furthermore, our study demonstrates the utility of our microvessels-on-a-chip as a screening platform for optimizing drug dosage, targeting ligands and drugs.

Interstitial flow regulates the angiogenic response and phenotype of endothelial cells in a 3D culture model

A crucial yet ill-defined phenomenon involved in the remodeling of vascular networks, including angiogenic sprouting, is flow-mediated endothelial dynamics and phenotype changes. Despite interstitial flow (IF) being ubiquitously present in living tissues surrounding blood capillaries, it is rarely investigated and poorly understood how endothelial cells respond to this flow during morphogenesis. Here we develop a microfluidic 3D in vitro model to investigate the role of IF during vasculogenic formation and angiogenic remodeling of microvascular networks. In the presented model, human blood endothelial cells co-cultured with stromal fibroblasts spontaneously organize into an interconnected microvascular network and then further expand to adjacent avascular regions in a manner of neovessel sprouting. We found that in the presence of IF, vasculogenic organization of the microvascular network was significantly facilitated regardless of the flow direction, whereas angiogenic sprouting was promoted only when the directions of flow and sprouting were opposite while angiogenic activity was suppressed into the direction of flow. We also observed that the vasculatures switch between active angiogenic remodeling and quiescent/non-sprouting state in the contexts provided by IF. This regulatory effect can be utilized to examine the role of anti-angiogenic compounds, clearly distinguishing the differential influences of the compounds depending on their mechanisms of action. Collectively, these results suggest that IF may serve as a critical regulator in tissue vascularization and pathological angiogenesis.