In-Situ Deposition of Graphene Oxide Catalyst for Efficient Photoelectrochemical Hydrogen Evolution Reaction Using Atmospheric Plasma

The vacuum deposition method requires high energy and temperature. Hydrophobic reduced graphene oxide (rGO) can be obtained by plasma-enhanced chemical vapor deposition under atmospheric pressure, which shows the hydrophobic surface property. Further, to compare the effect of hydrophobic and the hydrophilic nature of catalysts in the photoelectrochemical cell (PEC), the prepared rGO was additionally treated with plasma that attaches oxygen functional groups effectively to obtain hydrophilic graphene oxide (GO). The hydrogen evolution reaction (HER) electrocatalytic activity of the hydrophobic rGO and hydrophilic GO deposited on the p-type Si wafer was analyzed. Herein, we have proposed a facile way to directly deposit the surface property engineered GO.

Probing Charge Carrier Transport and Recombination Pathways in Monolayer MoS2/WS2 Heterojunction Photoelectrodes

Monolayer heterojunctions such as MoS₂/WS₂ are attractive for solar energy conversion applications because the interfacial electric field spatially separates charge carriers in less than 100 fs. Photoelectrochemical cells represent an intriguing platform to collect the spatially separated carriers. However, the recombination, transport, and interfacial charge transfer processes that take place following the ultrafast charge separation step have not been investigated. Here we demonstrate novel charge recombination and transport pathways in monolayer MoS₂/WS₂ photoelectrochemical cells by spatially resolving the net collection of carriers (i.e., the photocurrent) at the single nanosheet level. We discovered an excitation-wavelength-dependent recombination pathway that depends on the heterojunction stacking configuration and the carrier generation profile in the heterostructure. Photocurrent mapping measurements revealed that charge transport occurs parallel to the layers over micrometer-scale distances even though the indium tin oxide electrode and liquid electrolyte provide efficient charge extraction pathways via intimate electron- and hole-selective contacts. Our results reveal how composition heterogeneity influences the performance of bulk heterojunction electrodes made from randomly oriented nanosheets and provide critical insight into the design of efficient heterojunction photoelectrodes for solar energy conversion applications.

Freestanding Hierarchical Carbon Nitride/Carbon-Paper Electrode as a Photoelectrocatalyst for Water Splitting and Dye Degradation

Freestanding electrodes composed of 2D materials are highly attractive for many applications such as batteries, membranes, actuators, optical devices, and other energy-related devices owing to their low price, unique structure, high specific surface area, and excellent mechanical and electrical properties. Here, we report the facile large-scale fabrication of freestanding hierarchical carbon nitride/carbon electrodes (CN/C) by the in situ crystallization of CN precursors on conductive carbon paper, followed by thermal annealing. The resulting CN exhibits a vertically aligned morphology with a homogeneous layer distribution, improved crystallinity, and excellent contact with the carbon paper. The freestanding electrodes exhibit high electrical conductivity and good photoelectrochemical activity as anodes in water splitting photoelectrochemical cells. Furthermore, we show here as a proof-of-concept that the freestanding CN/C electrodes can be used as photoelectrocatalysts for the oxidative degradation of organic compounds in water, with enhanced activity compared to photocatalytic and electrocatalytic degradation, while the extracted electrons can be used for the simultaneous production of hydrogen at the cathode.

Excitation energy-dependent photocurrent switching in a single-molecule photodiode

The direction of electron flow in molecular optoelectronic devices is dictated by charge transfer between a molecular excited state and an underlying conductor or semiconductor. For those devices, controlling the direction and reversibility of electron flow is a major challenge. We describe here a single-molecule photodiode. It is based on an internally conjugated, bichromophoric dyad with chemically linked (porphyrinato)zinc(II) and bis(terpyridyl)ruthenium(II) groups. On nanocrystalline, degenerately doped indium tin oxide electrodes, the dyad exhibits distinct frequency-dependent, charge-transfer characters. Variations in the light source between red-light (∼1.9 eV) and blue-light (∼2.7 eV) excitation for the integrated photodiode result in switching of photocurrents between cathodic and anodic. The origin of the excitation frequency-dependent photocurrents lies in the electronic structure of the chromophore excited states, as shown by the results of theoretical calculations, laser flash photolysis, and steady-state spectrophotometric measurements.

Ultrathin Silicon Oxide Film-Induced Enhancement of Charge Separation and Transport of Nanostructured Titanium(IV) Oxide Photoelectrode

The development of nanostructured semiconductor electrodes represented by a mesoporous TiO₂ nanocrystalline (mp-TiO₂ ) film is currently bringing great progresses in photoelectrochemical (PEC) devices for solar-to-electricity and solar-to-chemical conversion. Two serious losses can occur in PEC devices: 1) recombination between the conduction band (CB) electrons and valence band (VB) holes in the bulk and at the surface and 2) back reaction or electron trapping by oxidant in the electrolyte solution during transport to the electron-collecting electrode. Thus, the major challenge in common with the nanostructured semiconductor photoanodes is to achieve efficient charge separation and electron transport. In this study, an ultrathin SiO_x layer was formed on both the external and the internal surface of mp-TiO₂ using an original chemisorption-calcination technique employing 1,3,5,7-tetramethyltetrasiloxane as a starting material. The SiO_x surface modification of the mp-TiO₂ photoanode drastically prolongs the mean lifetime of CB-electrons in TiO₂ because of enhanced charge separation and electron transport by the negative charge applied in aqueous electrolyte solution. We have demonstrated that the performance of a one-compartment H₂ O₂ -photofuel cell using mp-TiO₂ as the photoanode is greatly boosted by the surface modification with the SiO_x layer. We anticipate that this methodology is widely applicable to nanostructured metal oxide semiconductor electrodes, contributing to the improvement in the performance of PEC devices.

Laser Annealing Improves the Photoelectrochemical Activity of Ultrathin MoSe2 Photoelectrodes

Understanding light-matter interactions in transition-metal dichalcogenides (TMDs) is critical for optoelectronic device applications. Several studies have shown that high intensity light irradiation can tune the optical and physical properties of pristine TMDs. The enhancement in optoelectronic properties has been attributed to a so-called laser annealing effect that heals chalcogen vacancies. However, it is unknown whether laser annealing improves functional properties such as photocatalytic activity. Here, we show that high intensity supra band gap illumination improves the photoelectrochemical activity of MoSe₂ nanosheets for iodide oxidation in indium doped tin oxide/MoSe₂/I^-, I₃^-/Pt liquid junction solar cells. Ensemble-level photoelectrochemical measurements show that, on average, illuminating MoSe₂ thin films with 1 W/cm² 532 nm excitation increases the photoelectrochemical current by 142% and shifts the photocurrent response to more favorable (negative) potentials. Scanning photoelectrochemical microscopy measurements reveal that pristine bilayer (2L)-MoSe₂, trilayer (3L)-MoSe₂, and multilayer-thick nanosheets are initially inactive for iodide oxidation. The light treatment activates 2L-MoSe₂ and 3L-MoSe₂ materials, and the activation process initiates at the edge sites. The photocurrent enhancement is more significant for 2L-MoSe₂ than for 1L-MoSe₂. Multilayer-thick MoSe₂ remains inactive for iodide oxidation even after the laser treatment. Our microscopy measurements reveal that the laser-induced enhancement effect depends critically on MoSe₂ layer thickness. X-ray photoelectron spectroscopy measurements further show that the laser treatment oxidizes Mo(IV) species that are initially associated with Se vacancies. Ambient oxygen fills the Se vacancies and removes trap states, thereby increasing the overall photogenerated carrier collection efficiency. To the best of our knowledge, this work represents the first report on using laser to enhance the photoelectrocatalytic properties of few-layer-thick TMDs. The simple and rapid laser annealing procedure is a promising strategy to tune the reactivity of TMD-based photoelectrochemical cells for electricity and chemical fuel production.

Mixed-Ligand-Architected 2D Co(II)-MOF Expressing a Novel Topology for an Efficient Photoanode for Water Oxidation Using Visible Light

The structural diversity of Co(II) metal centers is known to influence their physicochemical properties. A novel two-dimensional (2D) Co(II)-MOF {[Co₅(HL)₄(dpp)₂(H₂O)₂(μ-OH)₂]·21H₂O} n has been designed and synthesized by adopting a mixed-ligand strategy, using 1,3-di(4-pyridyl)propane (dpp) colinker with a flexible spacer H₃L (H₃L: 5-(2 carboxybenzyloxy)isophthalic acid). Co(II)-MOF features a 2D network, which is further interpenetrated among the equivalent sets and therefore results in a 3D supramolecular network. Topologically, the entire network can be viewed as a (3,4,8)-connected three-nodal net with the extended point symbol of {4.5.7}4{4¹².5².7¹⁰.9⁴}{5².8.9².10}2, duly assigned to the novel topological type smm2. The functional utility of Co(II)-MOF is demonstrated by employing it toward oxygen evolution reaction (OER) in a photoelectrochemical cell, exhibiting appreciable photocurrents of up to 5.89 mA/cm² when used as an anode in a photoelectrochemical cell, while also displaying encouraging electrocatalytic currents of 9.32 mA/cm² (at 2.01 V vs RHE) for the OER. Moreover, detailed electrochemical impedance spectroscopy studies confirm enhanced charge-transfer kinetics and improved conductivity under illumination with minimal effect of interfacial phenomena. This work provides a reference for the expanding field of research into applications of MOF materials and establishes MOF materials as favorable candidates for sustainable and efficient design of electrodes for water splitting.

Simultaneous Photoelectrocatalytic Water Oxidation and Oxygen Reduction for Solar Electricity Production in Alkaline Solution

The photoelectrochemical (PEC) method offers an alternative approach to photovoltaic devices for solar electricity generation. The water oxidation reaction (WOR) on the anode and oxygen reduction reaction (ORR) on the cathode is an ideal design for energy transfer owing to their superiority in terms of cleanliness, eco-friendliness, and natural abundance. However, solar electricity production based on O₂ circulation by a fuel-free PEC cell is very challenging because it is extremely hard to extract electrons from water molecules owing to the uphill and sluggish WOR together with enormous overpotential for the cathodic ORR. Herein, a PEC cell based on the OH^- /O₂ redox pair is reported for efficient and sustainable solar electricity production by using two photoelectrodes of TiO₂ and polyterthiophene in alkaline electrolyte. This fuel-free PEC cell delivers an open-circuit voltage up to 0.90 V and a maximum power density of 222 μW cm^-2 with O₂ -saturated NaOH electrolyte under AM 1.5 G solar irradiation. A record solar-to-electricity conversion efficiency of 0.22 % is achieved in the case of tandem illumination of the two photoelectrodes. In addition, the dual photoelectrode remains robust in accelerated and day-night cycling operation under natural atmosphere for more than a week. This PEC cell is free of fuel, separating membranes, and cocatalyst, which may guide future designs for clean and simple devices for solar energy conversion.

New Insights into the Electron-Collection Efficiency Improvement of CdS-Sensitized TiO2 Nanorod Photoelectrodes by Interfacial Seed-Layer Mediation

Titanium dioxide (TiO₂) nanorods (NRs) are widely used as photoanodes in photoelectrochemical (PEC) solar fuel production because of their remarkable photoactivity and stability. In addition, TiO₂ NR electrode materials can be decorated with active CdS quantum dots (QDs) to expand the sunlight photon capture. The overall photoelectric conversion efficiency for TiO₂ NR or QD-sensitized TiO₂ NR electrode materials in PEC is typically dominated by their interfacial electron transfer (ET) properties. To understand the key factors affecting the ET, the anatase TiO₂ seed layer was added into the interface between the rutile TiO₂ NRs and fluorine-doped tin oxide (FTO) substrate. This seed layer enhanced the photocatalytic performance of both the TiO₂ NR and CdS QD-sensitized TiO₂ NR photoanodes in PEC. Time-resolved photoluminescence spectroscopy and PEC analyses, including Mott-Schottky, electrochemical impedance spectroscopy, and photovoltage ( V_ph) measurements, were used to study the charge-carrier dynamics at the interfaces between the FTO, TiO₂, and CdS QD. Analysis of the results showed that band alignment at the anatase/rutile junction between the TiO₂ and FTO promoted electron-collection efficiency ( e_EC) at the FTO/TiO₂ interface and ET rate constant ( k_ET) at the TiO₂/CdS QD interface. Furthermore, 34% enhancement of the efficiency in hydrogen (H₂) generation demonstrated the potential of the TiO₂ seed-layer-mediated TiO₂/CdS QD NR photoanode in the application of PEC solar fuel production. The current work represents new insights into the mechanism of ET in TiO₂ and TiO₂/CdS QD NR, which is very useful for the development of photoelectrode materials in solar energy conversions.

Photoelectrochemical CO2 Reduction Using a Ru(II)-Re(I) Supramolecular Photocatalyst Connected to a Vinyl Polymer on a NiO Electrode

A Ru(II)-Re(I) supramolecular photocatalyst and a Ru(II) redox photosensitizer were both deposited successfully on a NiO electrode by using methyl phosphonic acid anchoring groups and the electrochemical polymerization of the ligand vinyl groups of the complexes. This new molecular photocathode, poly-RuRe/NiO, adsorbed a larger amount of the metal complexes compared to one using only methyl phosphonic acid anchor groups, and the stability of the complexes on the NiO electrode were much improved. The poly-RuRe/NiO acted as a photocathode for the photocatalytic reduction of CO₂ at E = -0.7 V vs Ag/AgCl under visible-light irradiation in an aqueous solution. The poly-RuRe/NiO produced approximately 2.5 times more CO, and its total Faradaic efficiency of the reduction products improved from 57 to 85%.

Inorganic Ions Assisted the Anisotropic Growth of CsPbCl3 Nanowires with Surface Passivation Effect

All-inorganic halide perovskite nanowires (NWs) exhibit improved thermal and hydrolysis stability and could thus play a vital role in nanoscale optoelectronics. Among them, blue-light-based devices are extremely limited because of the lack of a facile method to obtain high-purity CsPbCl₃ NWs. Herein, we report a direct and facile method for the synthesis of CsPbCl₃ NWs assisted by inorganic ions that served both as a morphology controlling agent for the anisotropic growth of nanomaterials and a surface passivation species modulating the surface of nanomaterials. This new approach allows us to obtain high-purity and size-uniform NWs as long as 500 nm in length and 20 nm in diameter with high reproducibility. X-ray photoelectron spectroscopy and ultrafast spectroscopic measurements confirmed that a reduced band gap caused by the surface species of NWs relative to nanocubes (NCs) was achieved at the photon energy of 160 eV because of the hybrid surface passivation contributed by adsorbed inorganic ions. The resulting NWs demonstrate significantly enhanced photoelectrochemical performances, 3.5-fold increase in the photocurrent generation, and notably improved stability compared to their NC counterparts. Our results suggest that the newly designed NWs could be a promising material for the development of nanoscale optoelectronic devices.

Toward Tandem Solar Cells for Water Splitting Using Polymer Electrolytes

Tandem photoelectrochemical cells, formed by two photoelectrodes with complementary light absorption, have been proposed to be a viable approach for obtaining clean hydrogen. This requires the development of new designs that allow for upscaling, which would be favored by the use of transparent polymer electrolyte membranes (PEMs) instead of conventional liquid electrolytes. This article focuses on the photoelectrochemical performance of a water-splitting tandem cell based on a phosphorus-modified α-Fe₂O₃ photoanode and on an iron-modified CuO photocathode, with the employment of an alkaline PEM. Such a photoelectrochemical cell works even in the absence of bias, although significant effort should be directed to the optimization of the photoelectrode/PEM interface. In addition, the results reveal that the employment of polymer electrolytes increases the stability of the device, especially in the case of the photocathode.

Screen Printed Pb₃O₄ Films and Their Application to Photoresponsive and Photoelectrochemical Devices

A new and simple procedure for the deposition of lead (II, IV) oxide films by screen printing was developed. In contrast to conventional electrochemical methods, films can be also deposited on non-conductive substrates without any specific dimensional restriction, being the only requirement the thermal stability of the substrate in air up to 500 °C to allow for the calcination of the screen printing paste and sintering of the film. In this study, films were exploited for the preparation of both photoresponsive devices and photoelectrochemical cell photoanodes. In both cases, screen printing was performed on FTO (Fluorine-Tin Oxide glass) substrates. The photoresponsive devices were tested with I-V curves in dark and under simulated solar light with different irradiation levels. Responses were evaluated at different voltage biases and under light pulses of different durations. Photoelectrochemical cells were tested by current density–voltage (J-V) curves under air mass (AM) 1.5 G illumination, incident photon-to-current efficiency (IPCE) measurements, and electrochemical impedance spectroscopy.

Layer-by-Layer Assembly of Polyoxometalates for Photoelectrochemical (PEC) Water Splitting: Toward Modular PEC Devices

Artificial photosynthesis is considered one of the most promising solutions to modern energy and environmental crises. Considering that it is enabled by multiple components through a series of photoelectrochemical processes, the key to successful development of a photosynthetic device depends not only on the development of novel individual components but also on the rational design of an integrated photosynthetic device assembled from them. However, most studies have been dedicated to the development of individual components due to the lack of a general and simple method for the construction of the integrated device. In the present study, we report a versatile and simple method to prepare an efficient and stable photoelectrochemical device via controlled assembly and integration of functional components on the nanoscale using the layer-by-layer (LbL) assembly technique. As a proof of concept, we could successfully build a photoanode for solar water oxidation by depositing a thin film of diverse cationic polyelectrolytes and anionic polyoxometalate (molecular metal oxide) water oxidation catalysts on the surface of various photoelectrode materials (e.g., Fe₂O₃, BiVO₄, and TiO₂). It was found that the performance of photoanodes was significantly improved after the deposition in terms of stability as well as photocatalytic properties, regardless of types of photoelectrodes and polyelectrolytes employed. Considering the simplicity and versatile nature of LbL assembly techniques, our approach can contribute to the realization of artificial photosynthesis by enabling the design of novel photosynthetic devices.

Harvesting Hydrogen Gas from Air Pollutants with an Unbiased Gas Phase Photoelectrochemical Cell

The concept of an all-gas-phase photoelectrochemical (PEC) cell producing hydrogen gas from volatile organic contaminated gas and light is presented. Without applying any external bias, organic contaminants are degraded and hydrogen gas is produced in separate electrode compartments. The system works most efficiently with organic pollutants in inert carrier gas. In the presence of oxygen, the cell performs less efficiently but still significant photocurrents are generated, showing the cell can be run on organic contaminated air. The purpose of this study is to demonstrate new application opportunities of PEC technology and to encourage further advancement toward PEC remediation of air pollution with the attractive feature of simultaneous energy recovery and pollution abatement.

Nano-Photoelectrochemical Cell Arrays with Spatially Isolated Oxidation and Reduction Channels

Photoelectrochemical conversion of solar energy is explored for many diverse applications but suffers from poor efficiencies due to limited solar absorption, inadequate charge carrier separation, redox half-reactions occurring in close proximity, and/or long ion diffusion lengths. We have taken a drastically different approach to the design of photoelectrochemical cells (PECs) to spatially isolate reaction sites at the nanoscale to different materials and flow channels, suppressing carrier recombination and back-reaction of intermediates while shortening ion diffusion paths and, importantly, avoiding mixed product generation. We developed massively parallel nano-PECs composed of an array of open-ended carbon nanotubes (CNTs) with photoanodic reactions occurring on the outer walls, uniformly coated with titanium dioxide (TiO₂), and photocathodic reactions occurring on the inner walls, decorated with platinum (Pt). We verified the redox reaction isolation by demonstrating selective photodeposition of manganese oxide on the outside and silver on the inside of the TiO₂/CNT/Pt nanotubes. Further, the nano-PECs exhibit improved solar absorption and efficient charge transfer of photogenerated carriers to their respective redox sites, leading to a 1.8% photon-to-current conversion efficiency (a current density of 4.2 mA/cm²) under white-light irradiation. The design principles demonstrated can be readily adapted to myriads of photocatalysts for cost-effective solar utilization.

Double-Layer Graphene Outperforming Monolayer as Catalyst on Silicon Photocathode for Hydrogen Production

Photoelectrochemical cells are used to split hydrogen and oxygen from water molecules to generate chemical fuels to satisfy our ever-increasing energy demands. However, it is a major challenge to design efficient catalysts to use in the photoelectochemical process. Recently, research has focused on carbon-based catalysts, as they are nonprecious and environmentally benign. Interesting advances have also been made in controlling nanostructure interfaces and in introducing new materials as catalysts in the photoelectrochemical cell. However, these catalysts have as yet unresolved issues involving kinetics and light-transmittance. In this work, we introduce high-transmittance graphene onto a planar p-Si photocathode to produce a hydrogen evolution reaction to dramatically enhance photon-to-current efficiency. Interestingly, double-layer graphene/Si exhibits noticeably improved photon-to-current efficiency and modifies the band structure of the graphene/Si photocathode. On the basis of in-depth electrochemical and electrical analyses, the band structure of graphene/Si was shown to result in a much lower work function than Si, accelerating the electron-to-hydrogen production potential. Specifically, plasma-treated double-layer graphene exhibited the best performance and the lowest work function. We electrochemically analyzed the mechanism at work in the graphene-assisted photoelectrode. Atomistic calculations based on the density functional theory were also carried out to more fully understand our experimental observations. We believe that investigation of the underlying mechanism in this high-performance electrode is an important contribution to efforts to develop high-efficiency metal-free carbon-based catalysts for photoelectrochemical cell hydrogen production.

Simple but Effective Way To Enhance Photoelectrochemical Solar-Water-Splitting Performance of ZnO Nanorod Arrays: Charge-Trapping Zn(OH)2 Annihilation and Oxygen Vacancy Generation by Vacuum Annealing

This study presents an effective and the simplest method to substantially improve the photoelectrochemical water-splitting ability of hydrothermally grown ZnO nanorod arrays (NRAs). In the hydrothermal growth of ZnO NRAs, unwanted Zn(OH)₂ species are formed, which act as trapping sites of photoexcited charges. We found that those inherent charge-trapping sites could be annihilated by the desorption of the hydroxyl groups upon vacuum annealing above 200 °C, which resulted in an enhancement of the charge-separation efficiency and photocurrent density. Another drastic increase in the photocurrent density occurred when ZnO NRAs were treated with annealing at higher temperature (700 °C), which can be attributed to the introduced oxygen vacancies acting as shallow donors in the ZnO crystal lattice. The removal of the charge-trapping Zn(OH)₂ and the generation of oxygen vacancies were confirmed by photoluminescence (PL) and XPS analyses. The ZnO NRAs treated by this simple method yield a photocurrent density of 600 μA/cm² at 1.23 V_RHE under 1 sun illumination, which is 20 times higher than that obtained from as-grown ZnO NRAs. This study presents a highly efficient way of increasing the bulk electric conductivity and photoelectrochemical activity of metal oxide nanorods without requiring the introduction of any extrinsic dopants.

Persistent Hydrogen Production by the Photo-Assisted Microbial Electrolysis Cell Using a p-Type Polyaniline Nanofiber Cathode

A microbial electrolysis cell, though considered as a promising, environmentally friendly technology for hydrogen production, suffers from concomitant production of methane. The high hydrogen/methane ratio at the initial operation stage decreases with time. Here we report for the first time the photoassisted microbial electrolysis cell (MEC) for persistent hydrogen production using polyaniline nanofibers as a cathode. Under 0.8 V external bias and laboratory fluorescent light illumination in a single-chamber MEC, continuous hydrogen production from acetate at a rate of 1.78 mH2 ³  m^-3  d^-1 with 79.2 % overall hydrogen recovery was achieved with negligible methane formation for six months. Energy efficiencies based on input electricity as well as input electricity plus substrate were 182 and 66.2 %, respectively. This was attributed to the p-type-semiconductor characteristics of polyaniline nanofibers in which photoexcited electrons are used to reduce protons at the surface and holes are reduced with electrons originating from acetate oxidation at the anode. This method can be extended to microbial wastewater treatment for hydrogen production.

Human Urine-Fueled Light-Driven NADH Regeneration for Redox Biocatalysis

Human urine is considered as an alternative source of hydrogen and electricity owing to its abundance and high energy density. Here we show the utility of human urine as a chemical fuel for driving redox biocatalysis in a photoelectrochemical cell. Ni(OH)2 -modified α-Fe2 O3 is selected as a photoanode for the oxidation of urea in human urine and black silicon (bSi) is used as a photocathode material for nicotinamide cofactor (NADH: hydrogenated nicotinamide adenine dinucleotide) regeneration. The electrons extracted from human urine are used for the regeneration of NADH, an essential hydride mediator that is required for numerous redox biocatalytic reactions. The catalytic reactions at both the photoanode and the photocathode were significantly enhanced by light energy that lowered the overpotential and generated high currents in the full cell system.

CoSe₂ and NiSe₂ Nanocrystals as Superior Bifunctional Catalysts for Electrochemical and Photoelectrochemical Water Splitting

Catalysts for oxygen evolution reactions (OER) and hydrogen evolution reactions (HER) are central to key renewable energy technologies, including fuel cells and water splitting. Despite tremendous effort, the development of low-cost electrode catalysts with high activity remains a great challenge. In this study, we report the synthesis of CoSe2 and NiSe2 nanocrystals (NCs) as excellent bifunctional catalysts for simultaneous generation of H2 and O2 in water-splitting reactions. NiSe2 NCs exhibit superior electrocatalytic efficiency in OER, with a Tafel slope (b) of 38 mV dec(-1) (in 1 M KOH), and HER, with b = 44 mV dec(-1) (in 0.5 M H2SO4). In comparison, CoSe2 NCs are less efficient for OER (b = 50 mV dec(-1)), but more efficient for HER (b = 40 mV dec(-1)). It was found that CoSe2 NCs contained more metallic metal ions than NiSe2, which could be responsible for their improved performance in HER. Robust evidence for surface oxidation suggests that the surface oxide layers are the actual active sites for OER, and that CoSe2 (or NiSe2) under the surface act as good conductive layers. The higher catalytic activity of NiSe2 is attributed to their oxide layers being more active than those of CoSe2. Furthermore, we fabricated a Si-based photoanode by depositing NiSe2 NCs onto an n-type Si nanowire array, which showed efficient photoelectrochemical water oxidation with a low onset potential (0.7 V versus reversible hydrogen electrode) and high durability. The remarkable catalytic activity, low cost, and scalability of NiSe2 make it a promising candidate for practical water-splitting solar cells.

CuO-Functionalized Silicon Photoanodes for Photoelectrochemical Water Splitting Devices

One main difficulty for the technological development of photoelectrochemical (PEC) water splitting (WS) devices is the fabrication of active, stable and cost-effective photoelectrodes that ensure high performance. Here, we report the development of a CuO/Silicon based photoanode, which shows an onset potential for the water oxidation of 0.53 V vs SCE at pH 9, that is, an overpotential of 75 mV, and high stability above 10 h. These values account for a photovoltage of 420 mV due to the absorbed photons by silicon, as proven by comparing with analogous CuO/FTO electrodes that are not photoactive. The photoanodes have been fabricated by sputtering a thin film of Cu(0) on commercially available n-type Si wafers, followed by a photoelectrochemical treatment in basic pH conditions. The resulting CuO/Cu layer acts as (1) protective layer to avoid the corrosion of nSi, (2) p-type hole conducting layer for efficient charge separation and transportation, and (3) electrocatalyst to reduce the overpotential of the water oxidation reaction. The low cost, low toxicity, and good performance of CuO-based coatings can be an attractive solution to functionalize unstable materials for solar energy conversion.

Overall Photoelectrochemical Water Splitting using Tandem Cell under Simulated Sunlight

A stand-alone photoelectrochemical (PEC) water-splitting system driven only by sunlight was demonstrated with a tandem-scheme of Pt/CdS/CuGa3 Se5 /(Ag,Cu)GaSe2 photocathode and NiOOH/FeOOH/Mo:BiVO4 photoanode in a neutral phosphate buffer solution as an electrolyte. The as-prepared semi-transparent Mo:BiVO4 layer allows sunlight to pass through the top photoanode and reach the bottom photocathode. Consequently, the tandem cell showed stoichiometric hydrogen and oxygen evolution with a solar-to-hydrogen (STH) conversion efficiency of 0.67 % over 2 h without degradation. The stability and STH efficiency are the highest among similar configuration of PEC tandem cells.

Molecular Catalyst Immobilized Photocathodes for Water/Proton and Carbon Dioxide Reduction

As one of the components in a tandem photoelectrochemical cell for solar-fuel production, the photocathode carries out the reduction reaction to convert solar light and the corresponding substrate (e.g., proton and CO2) into target fuels. Immobilizing molecular catalysts onto the photocathode is a promising strategy to enhance the interfacial electron/hole-transfer process and to improve the stability of the catalysts. Furthermore, the molecular catalysts are beneficial in improving the selectivity of the reduction reaction, particularly for CO2 reduction. On the photocathode, the binding mode of the catalysts and the arrangement between the photosensitizer and the catalyst also play crucial roles in the performance and stability of the final device. How to firmly and effectively immobilize the catalyst on the photoelectrode is now becoming a scientific question. Recent publications on molecular catalyst immobilized photocathodes are therefore surveyed.

Nonepitaxial Thin-Film InP for Scalable and Efficient Photocathodes

To date, some of the highest performance photocathodes of a photoelectrochemical (PEC) cell have been shown with single-crystalline p-type InP wafers, exhibiting half-cell solar-to-hydrogen conversion efficiencies of over 14%. However, the high cost of single-crystalline InP wafers may present a challenge for future large-scale industrial deployment. Analogous to solar cells, a thin-film approach could address the cost challenges by utilizing the benefits of the InP material while decreasing the use of expensive materials and processes. Here, we demonstrate this approach, using the newly developed thin-film vapor-liquid-solid (TF-VLS) nonepitaxial growth method combined with an atomic-layer deposition protection process to create thin-film InP photocathodes with large grain size and high performance, in the first reported solar device configuration generated by materials grown with this technique. Current-voltage measurements show a photocurrent (29.4 mA/cm(2)) and onset potential (630 mV) approaching single-crystalline wafers and an overall power conversion efficiency of 11.6%, making TF-VLS InP a promising photocathode for scalable and efficient solar hydrogen generation.