Evaluation of bioadhesive glipizide spheres and compacts from spheres prepared by extruder/marumerizer technique

The objective of this study was to attempt to deliver glipizide from spheres and compacts containing the natural polymer Carrageenan (Gelcarin, GP 812) and prepared by extruder/marumerizer technique. A second objective was to evaluate the mucoadhesive strength of the bioadhesive spheres onto the mucus membrane of rabbit. The effects of polymer, drug level, and type of spheronizing material were evaluated. All sphere formulations were compacted into tablets using a rotary Manesty B-3B machine equipped with 12/32 flat face tooling. Results show drug release from spheres and compacts decreased as the level of Carrageenan was increased. However as the level of drug was increased drug release also increased. Spheres containing Avicel PH-101 gave higher drug release than spheres of the same composition but prepared with Avicel RC-581. In general, the drug release from tablets was higher than its corresponding spheres and drug release from spheres and tablets containing Carrageenan was higher than control spheres and tablets of the same composition but without Carrageenan. Tablet formulations compacted from spheres containing Avicel RC-581 gave higher release rate constants than tablet formulations of the same composition but prepared with Avicel PH-101. The bioadhesion study showed that mucoadhesion strength between spheres and mucus membrane of the rabbit depends on the levels of polymer, drug, and type of spheronizing material. Developed bioadhesive spheres and tablets increase the solubility of glipizide which may increase its bioavailability and also increased the adherence of the bioadhesive systems to the mucous membrane so that once daily dose can be administered.

Cell-wall architecture and lignin composition of wheat developed in a microgravity environment

The microgravity environment encountered during space-flight has long been considered to affect plant growth and developmental processes, including cell wall biopolymer composition and content. As a prelude to studying how microgravity is perceived - and acted upon - by plants, it was first instructive to investigate what gross effects on plant growth and development occurred in microgravity. Thus, wheat seedlings were exposed to microgravity on board the space shuttle Discovery (STS-51) for a 10 day duration, and these specimens were compared with their counterparts grown on Earth under the same conditions (e.g. controls). First, the primary roots of the wheat that developed under both microgravity and 1 g on Earth were examined to assess the role of gravity on cellulose microfibril (CMF) organization and secondary wall thickening patterns. Using a quick freeze/deep etch technique, this revealed that the cell wall CMFs of the space-grown wheat maintained the same organization as their 1 g-grown counterparts. That is, in all instances, CMFs were randomly interwoven with each other in the outermost layers (farthest removed from the plasma membrane), and parallel to each other within the individual strata immediately adjacent to the plasma membranes. The CMF angle in the innermost stratum relative to the immediately adjacent stratum was ca 80 degrees in both the space and Earth-grown plants. Second, all plants grown in microgravity had roots that grew downwards into the agar; they did not display "wandering" and upward growth as previously reported by others. Third, the space-grown wheat also developed normal protoxylem and metaxylem vessel elements with secondary thickening patterns ranging from spiral to regular pit to reticulate thickenings. Fourthly, both the space- and Earth-grown plants were essentially of the same size and height, and their lignin analyses revealed no substantial differences in their amounts and composition regardless of the gravitational field experienced, i.e. for the purposes of this study, all plants were essentially identical. These results suggest that the microgravity environment itself at best only slightly affected either cell wall biopolymer synthesis or the deposition of CMFs, in contrast to previous assertions.

Cellulose crystallites

This article discusses advances in understanding the structural and physicochemical characteristics of suspensions of cellulose crystallites prepared by acid hydrolysis of natural cellulose fibres. Consideration of recent developments in visualization of crystallite ultrastructure may provide clues to suspension behavior. In addition, novel applications in a diverse range of fields are presented, from iridescent pigments to biomolecular NMR studies.

A dynamical model for plant cell wall architecture formation

We discuss a dynamical mathematical model to explain cell wall architecture in plant cells. The highly regular textures observed in cell walls reflect the spatial organisation of the cellulose microfibrils (CMFs), the most important structural component of cell walls. Based on a geometrical theory proposed earlier [A. M. C. Emons, Plant, Cell and Environment 17, 3-14 (1994)], the present model describes the space-time evolution of the density of the so-called rosettes, the CMF synthesizing complexes. The motion of these rosettes in the plasma membrane is assumed to be governed by an optimal packing constraint on the CMFs plus adherent matrix material, that couples the direction of motion, and hence the orientation of the CMF being deposited, to the local density of rosettes. The rosettes are created inside the cell in the endoplasmatic reticulum and reach the cell-membrane via vesicles derived from Golgi-bodies. After being inserted into the plasma membrane they are assumed to be operative for a fixed, finite lifetime. The plasma membrane domains within which rosettes are activated are themselves also supposed to be mobile. We propose a feedback mechanism that precludes the density of rosettes to rise beyond a maximum dictated by the geometry of the cell. The above ingredients lead to a quasi-linear first order PDE for the rosette-density. Using the method of characteristics this equation can be cast into a set of first order ODEs, one of which is retarded. We discuss the analytic solutions of the model that give rise to helicoidal, crossed polylamellate, helical, axial and random textures, since all cell walls are composed of (or combinations of) these textures.

Optimized mixtures of recombinant Humicola insolens cellulases for the biodegradation of crystalline cellulose

The digestion of bacterial cellulose ribbons by ternary mixtures of enzymes consisting of recombinant cellulases (two cellobiohydrolases, Cel6A and Cel7A, and the endoglucanase Cel45A) from Humicola insolens was investigated over a wide range of mixture composition. The extent of digestion was followed by soluble sugar release (saccharification) analysis together with transmission electron microscopy (TEM) observations. It was found that the addition of minute quantities of Cel45A induced a spectacular increase in saccharification of the substrate with either Cel7A or the mixture of Cel6A and Cel7A. Conversely, only a moderate saccharification resulted from the mixing of Cel45A and Cel6A. This difference is believed to originate from (1) the occasional endo character of Cel6A and (2) the competition of Cel6A and Cel45A for the substrate sites that are sensitive to endo activity. Interestingly, the mixture of enzymes giving rise to the highest saccharification rate did not always correspond to mixtures of enzymes generating the highest synergy. TEM images revealed that the bacterial cellulose ribbons became at the same time cut and narrowed down under the action of an optimized mixture of the three enzymes.

Celery (Apium graveolens L.) parenchyma cell walls examined by atomic force microscopy: effect of dehydration on cellulose microfibrils

Atomic force microscopy (AFM) was used to image celery (Apium graveolens L.) parenchyma cell walls in situ. Cellulose microfibrils could clearly be distinguished in topographic images of the cell wall. The microfibrils of the hydrated walls appeared smaller, more uniformly distributed, and less enmeshed than those of dried peels. In material that was kept hydrated at all times and imaged under water, the microfibril diameter was mainly in the range 6-25 nm. The cellulose microfibril diameters were highly dependent on the water content of the specimen. As the water content was decreased, by mixing ethanol with the bathing solution, the microfibril diameters increased. Upon complete dehydration of the specimen we observed a significant increase in microfibril diameter. The procedure used to dehydrate the parenchyma cells also influenced the size of cellulose microfibrils with freeze-dried material having larger diameters than air-dried material.

New insight into cellulose structure by atomic force microscopy shows the i(alpha) crystal phase at near-atomic resolution

The organization of the surface of cellulose is important in cell structure, as well as in industrial processing and modification. Using atomic force microscopy, we show that the I(alpha) phase of native cellulose first proposed in 1984 and subsequently characterized by a triclinic unit cell exists over large areas of the surface of microcrystals from Valonia, one of the most highly crystalline celluloses. There is startling agreement between the observed structure and crystal models, and it is possible to identify the specific crystal face being imaged. The near-atomic resolution images also offer an insight into structural reconstructions at the surface compared to the interior. We are able to assign features in the images to particular side groups attached to the glucose ring and find indications of subtle modifications of the position of surface hydroxyls due to changes in hydrogen bonding.

Structure analysis of regenerated cellulose hydrogels by small-angle and ultra-small-angle x-ray scattering

Absolute intensities Deltai(q) of small-angle x-ray scattering (SAXS) and ultra-small-angle x-ray scattering (USAXS) were measured in a wide range of scattering vector q from 2x10(-4) to 0.5 A(-1) for transparent (VI-P) and translucent (VI-L) cellulose hydrogels prepared by coagulation and regeneration of viscose in acid solutions with and without acetone, respectively. We obtained the scattering intensities at very small q conveniently by desmearing the combined data measured by SAXS and USAXS. The plot of Deltai(q)q(2) versus log(10) q showed a peak at -2.5<log(10) q<-1.0. By assuming a two-phase model with the high-density phase (phase 1) composed of only cellulose and with the low-density phase (phase 2) composed of cellulose dispersed in water, volume fractions of phase 1 in VI-P and VI-L were determined to be 0.18 and 0.09, respectively, from the mean-square fluctuation of electron density determined as integral of (Deltai(q)q(2)dq). By fitting the observed scattering profile with the theoretical particle scattering functions of spheres, the average diameter of the high-density region including crystallite was determined to be 120 A for VI-P and 80 A for VI-L. Similar analyses were applied also to freeze-dried VI-P. These results were consistent with those obtained by the wide-angle x-ray-diffraction measurement and also with the observation by scanning probe microscopy.

Cortical microtubules form a dynamic mechanism that helps regulate the direction of plant growth

Plants form an axis by controlling the direction of cell expansion; this depends on the way in which cellulose microfibrils in the wall resist stretching in particular directions. In turn, the alignment of cellulose microfibrils correlates strongly with the alignment of plasma membrane-associated microtubules, which therefore seem to act as templates for laying down the wall fibrils. Microtubules are now known to be quite dynamic, and to reorient themselves between transverse and longitudinal alignments. Plants "steer" the direction of growth by reorienting the cellulose/microtubule machinery. For example, the model predicts that a transverse reorientation on one flank of an organ and a longitudinal orientation on the other should lead to bending. This response has recently been observed in living, gravistimulated maize coleoptiles microinjected with fluorescent microtubule protein. This paper reviews the idea of the dynamic microtubule template and discusses possible mechanisms of reorientation. Recent biochemical work has shown that microtubules are decorated with different classes of associated proteins, whose potential roles are outlined.

Imaging the enzymatic digestion of bacterial cellulose ribbons reveals the endo character of the cellobiohydrolase Cel6A from Humicola insolens and its mode of synergy with cellobiohydrolase Cel7A

Dispersed cellulose ribbons from bacterial cellulose were subjected to digestion with cloned Cel7A (cellobiohydrolase [CBH] I) and Cel6A (CBH II) from Humicola insolens either alone or in a mixture and in the presence of an excess of beta-glucosidase. Both Cel7A and Cel6A were effective in partially converting the ribbons into soluble sugars, Cel7A being more active than Cel6A. In combination, these enzymes showed substantial synergy culminating with a molar ratio of approximately two-thirds Cel6A and one-third Cel7A. Ultrastructural transmission electron microscopy (TEM) observations indicated that Cel7A induced a thinning of the cellulose ribbons, whereas Cel6A cut the ribbons into shorter elements, indicating an endo type of action. These observations, together with the examination of the digestion kinetics, indicate that Cel6A can be classified as an endo-processive enzyme, whereas Cel7A is essentially a processive enzyme. Thus, the synergy resulting from the mixing of Cel6A and Cel7A can be explained by the partial endo character of Cel6A. A preparation of bacterial cellulose ribbons appears to be an appropriate substrate, superior to Valonia or bacterial cellulose microcrystals, to visualize directly by TEM the endo-processivity of an enzyme such as Cel6A.

Characterization of cross-links between cellulose microfibrils, and their occurrence during elongation growth in pea epicotyl

The occurrence and chemical nature of the cross-links between cellulose microfibrils in outer epidermal cell walls in Pisum sativum cv. Alaska was investigated by rapid-freezing and deep-etching techniques coupled with chemical and enzymatic treatments. The cell wall in the elongating region of epidermal cells was characterized by the absence of the cross-links, while in the elongated region, the cell wall was characterized by the presence of cross-links. The cross-links remained in the cell wall of the elongated region after treatment with SDS electrophoresis sample buffer and treatment with 4% potassium hydroxide. After treatment with endo-1,4-beta-glucanase, which fragments xyloglucan, the cross-links were remarkably reduced from the cell wall of the elongated region. The endoglucanase treatment also reduced immunogold labeling of xyloglucan in the cell wall. The endoglucanase hydrolysate from the cell wall fraction of the elongated region gave spots of oligosaccharides in thin layer chromatography, which were identical to the spots of xyloglucan oligosaccharides produced by xyloglucanase from both the cell wall fraction and tamarind xyloglucan. These results indicate that the cross-links are made of xyloglucan. We discussed the possibility of cross-links involved in the control of mechanical properties of the cell wall.

Variation of cellulose microfibril angles in softwoods and hardwoods-a possible strategy of mechanical optimization

Position-resolved small-angle X-ray scattering was used to investigate the nanostructure of the wood cell wall in two softwood species (Norwegian spruce and Scots pine) and two hardwood species (pedunculate oak and copper beech). The tilt angle of the cellulose fibrils in the wood cell wall versus the longitudinal cell axis (microfibril angle) was systematically studied over a wide range of annual rings in each tree. The measured angles were correlated with the distance from the pith and the results were compared. The microfibril angle was found to decrease from pith to bark in all four trees, but was generally higher in the softwood than in the hardwood. In Norwegian spruce, the microfibril angles were higher in late wood than in early wood; in Scots pine the opposite was observed. In pedunculate oak and copper beech, low angles were found in the major part of the stem, except for the very first annual rings in pedunculate oak. The results are interpreted in terms of mechanical optimization. An attempt was made to give a quantitative estimation for the mechanical constraints imposed on a tree of given dimensions and to establish a model that could explain the general decrease of microfibril angles from pith to bark.

High resolution neutron fibre diffraction data on hydrogenated and deuterated cellulose

High-resolution fibre neutron diffraction data were recorded from cellulose samples on a D19 diffractometer at the Institut Laue-Langevin (Grenoble). Highly crystalline cellulose I samples from Cladophora (cellulose I alpha + I beta) or Halocynthia (cellulose I beta) origin were prepared in the form of oriented films. Samples were studied in a hydrogenated form and in a hydrogen-deuterium exchanged deuterated form corresponding to all OH moieties being replaced by ODs. These samples, which diffracted to a resolution of around 0.9 A, gave diffraction diagrams consisting of several hundred independent diffraction spots. Crystalline cellulose II fibres resulting from the mercerization of flax were also studied in a hydrogenated form using NaOH/H2O as mercerizing medium and in a deuterated form using NaOD/D2O. Both of these samples diffracted to around 1.2 A, giving fibre diffraction diagrams slightly less resolved than those of cellulose I, but still consisting of more than one hundred independent diffraction spots. For cellulose I as well as for cellulose II, significant differences between the hydrogenated and deuterated patterns were observed and recorded. These new data should lead to improved structures for cellulose and direct identification of the position of hydrogen atoms involved in hydrogen bonding.

Digestion of crystalline cellulose substrates by the clostridium thermocellum cellulosome: structural and morphological aspects

The action of cellulosomes from Clostridium thermocellum on model cellulose microfibrils from Acetobacter xylinum and cellulose microcrystals from Valonia ventricosa was investigated. The biodegradation of these substrates was followed by transmission electron microscopy, Fourier-transform IR spectroscopy and X-ray diffraction analysis, as a function of the extent of degradation. The cellulosomes were very effective in catalysing the complete digestion of bacterial cellulose, but the total degradation of Valonia microcrystals was achieved more slowly. Ultrastructural observations during the digestion process suggested that the rapid degradation of bacterial cellulose was the result of a very efficient synergistic action of the various enzymic components that are attached to the scaffolding protein of the cellulosomes. The degraded Valonia sample assumed various shapes, ranging from thinned-down microcrystals to crystals where one end was pointed and the other intact. This complexity may be correlated with the multi-enzyme content of the cellulosomes and possibly to a diversity of the cellulosome composition within a given batch. Another aspect of the digestion of model celluloses by cellulosomes is the relative invariability of their crystallinity, together with their Ialpha/Ibeta composition throughout the degradation process. Comparison of the action of cellulosomes with that of fungal enzymes indicated that the degradation of cellulose crystals by cellulosomes occurred with only limited levels of processivity, in contrast with the observations reported for fungal enzymes. The findings were consistent with a mechanism whereby initial attack by a cellulosome of an individual cellulose crystal results in its 'commitment' towards complete degradation.

Silicatein filaments and subunits from a marine sponge direct the polymerization of silica and silicones in vitro

Nanoscale control of the polymerization of silicon and oxygen determines the structures and properties of a wide range of siloxane-based materials, including glasses, ceramics, mesoporous molecular sieves and catalysts, elastomers, resins, insulators, optical coatings, and photoluminescent polymers. In contrast to anthropogenic and geological syntheses of these materials that require extremes of temperature, pressure, or pH, living systems produce a remarkable diversity of nanostructured silicates at ambient temperatures and pressures and at near-neutral pH. We show here that the protein filaments and their constituent subunits comprising the axial cores of silica spicules in a marine sponge chemically and spatially direct the polymerization of silica and silicone polymer networks from the corresponding alkoxide substrates in vitro, under conditions in which such syntheses otherwise require either an acid or base catalyst. Homology of the principal protein to the well known enzyme cathepsin L points to a possible reaction mechanism that is supported by recent site-directed mutagenesis experiments. The catalytic activity of the "silicatein" (silica protein) molecule suggests new routes to the synthesis of silicon-based materials.

Unidirectional processive action of cellobiohydrolase Cel7A on Valonia cellulose microcrystals

On the basis of the 'parallel-up' structure of the cellulose crystal, a crystallographic approach to study the mode of action of cellobiohydrolase Cel7A on Valonia cellulose microcrystal has been carried out. After incubation with Cel7A, most of the initially smooth and well defined Valonia microcrystals displayed fibrillation. However, as the hydrolysis reaction was rather heterogeneous, some microcrystals remained superficially intact. Close investigation on such crystals revealed polar morphology: one end was narrowed extremely or pointed. Electron microdiffraction analysis of these crystals evidenced that the narrowing of the microcrystals occurs at their reducing end side. This was also confirmed by the visualization of selective reducing end labeling at the pointed ends of microcrystals. These lines of investigation are the first demonstration that the processivity of Cel7A action against insoluble highly crystalline celluloses is unambiguously toward non-reducing ends from reducing ends.

Properties of biomolecules measured from atomic force microscope images: a review

AFM images can be used to obtain quantitative or qualitative information about the properties of biomaterials. Examples presented here are: (1) Persistence length measurements of moving and stationary DNA molecules. (2) Force mapping to measure properties such as the elasticity of cells and vesicles. (3) Phase mode imaging to detect variations in materials and properties of the sample surface. (4) Imaging of surfaces at different constant forces.

Chemical synthesis of cellulose and cello-oligomers using a hydrolysis enzyme as a catalyst

Regio- and stereo-selective synthesis of polysaccharides and oligosaccharides has been achieved by using glycosyl fluorides as substrates for cellulases. This methodology has successfully been applied to the first synthesis of cellulose via a non-biosynthetic pathway as well as to a selective preparation of cello-oligosaccharides and unnatural oligosaccharides. Using the enzymatic polymerization, it is possible to control the relative direction (parallel or anti-parallel) of each glucan chain in the synthetic cellulose in vitro. Based on these results, a new concept of 'allos-selectivity' in polymer synthesis has been proposed.

Steam explosion of woody hemp chènevotte

This paper concerns the morphology of hemp woody core cells, investigated by optical and scanning electron microscopy, and the chemical analysis of the hemp cells. Steam explosion was investigated as a pre-treatment step for woody hemp 'chènevotte', with the aim of optimizing the separation and delignification of woody fibres. In this study, we report the results of five experiments performed on 'chènevotte' samples impregnated in acid solution (0.1% w/w H2SO4) and steamed at 200, 210, 220, 230 and 240 degrees C for 180 s. The effect of process temperatures on the woody hemp core after acidic impregnation was followed by optical and scanning electron microscopy, by assessment of the chemical composition, and by evolution of the average degree of polymerization (DPv) values of the purified wood fibres. We found that treatment at 200 and 210 degrees C led to samples that were difficult to delignigy because the destructuring and disintegration of lignocellulosic materials were insufficient. A temperature of the order of 220-230 degrees C is required to obtain well-separated fibres. However, at a temperature of 240 degrees C, degradation and fibre damage were noted.

Cytokinesis in tobacco BY-2 and root tip cells: a new model of cell plate formation in higher plants

Cell plate formation in tobacco root tips and synchronized dividing suspension cultured tobacco BY-2 cells was examined using cryofixation and immunocytochemical methods. Due to the much improved preservation of the cells, many new structural intermediates have been resolved, which has led to a new model of cell plate formation in higher plants. Our electron micrographs demonstrate that cell plate formation consists of the following stages: (1) the arrival of Golgi-derived vesicles in the equatorial plane, (2) the formation of thin (20 +/- 6 nm) tubes that grow out of individual vesicles and fuse with others giving rise to a continuous, interwoven, tubulo-vesicular network, (3) the consolidation of the tubulo-vesicular network into an interwoven smooth tubular network rich in callose and then into a fenestrated plate-like structure, (4) the formation of hundreds of finger-like projections at the margins of the cell plate that fuse with the parent cell membrane, and (5) cell plate maturation that includes closing of the plate fenestrae and cellulose synthesis. Although this is a temporal chain of events, a developing cell plate may be simultaneously involved in all of these stages because cell plate formation starts in the cell center and then progresses centrifugally towards the cell periphery. The "leading edge" of the expanding cell plate is associated with the phragmoplast microtubule domain that becomes concentrically displaced during this process. Thus, cell plate formation can be summarized into two phases: first the formation of a membrane network in association with the phragmoplast microtubule domain; second, cell wall assembly within this network after displacement of the microtubules. The phragmoplast microtubules end in a filamentous matrix that encompasses the delicate tubulo-vesicular networks but not the tubular networks and fenestrated plates. Clathrin-coated buds/vesicles and multivesicular bodies are also typical features of the network stages of cell plate formation, suggesting that excess membrane material may be recycled in a selective manner. Immunolabeling data indicate that callose is the predominant lumenal component of forming cell plates and that it forms a coat-like structure on the membrane surface. We postulate that callose both helps to mechanically stabilize the early delicate membrane networks of forming cell plates, and to create a spreading force that widens the tubules and converts them into plate-like structures. Cellulose is first detected in the late smooth tubular network stage and its appearance seems to coincide with the flattening and stiffening of the cell plate.

Investigation of the lignin-degrading activity of Serratia marcescens: biochemical screening and ultrastructural evidence

Forty-one morphologically distinct bacterial isolates were developed from six lignin-containing environments. Each isolate was initially screened for potential lignin-degrading activity using relative growth on a lignocellulosic substrate and relative decolorization of a polymeric dye. Screened isolates were then tested for the ability to oxidize various lignin-related monomers, and the dimers anisoin and veratrylglycerol-beta-guaiacyl ether. Although most of the isolates oxidized the monomers, only two successfully oxidized the dimers. The dimer-degrading isolates were tested for extracellular activity against the beta-O-4 dimer veratryl-glycerol-beta-guaiacyl ether. No activity was detected for the isolates. Phanerochaete chrysosporium Burds used as a positive control demonstrated a high degree of activity in each assay. Extensive ultrastructural studies of lignocellulose alteration by the dimer-degrading isolates were conducted via light and transmission electron microscopy. These studies indicate that one of the isolates, identified as Serratia marcescens, is capable of degrading highly lignified secondary cell wall components. This activity is localized, apparently requiring direct contact between cells and substrate, which could be facilitated by an associated glycocalix. The results of the dimer degradation assays concur with the characterization of the responsible enzyme system as being membrane associated.

Single instillation of hydroxypropylcellulose-doxorubicin as treatment for superficial bladder carcinoma

A single instillation of hydroxypropylcellulose (HPC)-doxorubicin (20 mg/20 ml) was performed in 20 patients with superficial bladder carcinoma. The therapeutic effect was assessed by cystoscopy at 14-30 days after the instillation, and the residual tumor tissue was resected by transurethral resection (TUR) when possible. The results obtained for the therapeutic effect were as follows: a complete response (CR), in 7 cases (35%); a reduction in size of more than 50% (partial response, PR), in 6 cases (30%); and a reduction of less than 25% in size (no change, NC), in 7 cases (35%). Combined intravesical instillation of HPC-doxorubicin and local hyperthermia using a Thermotron RF-8 was performed in 11 patients with recurrent superficial bladder carcinoma. The total number of treatment courses ranged from three to five per patient. The results obtained for the effect of this combined treatment were as follows: a CR, in 6 cases (54.5%); a PR, in 3 cases (27.3%); and NC, in 2 cases (18.2%). Therefore, the combination of intravesical instillation of HPC-doxorubicin and local hyperthermia was more effective against superficial bladder carcinoma than the single instillation of the chemotherapeutic agent alone.

Gravity effects on cellulose assembly

The effect of microgravity on cellulose synthesis using the model system of Acetobacter xylinum was the subject of recent investigations using The National Aeronautics and Space Administration's Reduced Gravity Laboratory, a modified KC-135 aircraft designed to produce 20 sec of microgravity during the top of a parabolic dive. Approximately 40 parabolas were executed per mission, and a period of 2 x g was integral to the pullout phase of each parabola. Cellulose biosynthesis was initiated on agar surfaces, liquid growth medium, and buffered glucose during parabolic flight and terminated with 2.0% sodium azide or 50.0% ethanol. While careful ground and in-flight controls indicated normal, compact ribbons of microbial cellulose, data from five different flights consistently showed that during progression into the parabola regime, the cellulose ribbons became splayed. This observation suggests that some element of the parabola (the 20 sec microgravity phase, the 20 sec 2 x g phase, or a combination of both) was responsible for this effect. Presumably the cellulose I alpha crystalline polymorph normally is produced under strain, and the microgravity/hypergravity combination may relieve this stress to produce splayed ribbons. An in-flight video microscopy analysis of bacterial motions during a parabolic series demonstrated that the bacteria continue to synthesize cellulose during all phases of the parabolic series. Thus, the splaying may be a reflection of a more subtle alteration such as reduction of intermicrofibrillar hydrogen bonding. Long-term microgravity exposures during spaceflight will be necessary to fully understand the cellulose alterations from the short-term microgravity experiments.