Enhancing membrane separation performance in the conditions of different water electrical conductivity and fouling types via surface grafting modification of a nanofiltration membrane, NF90

A commercialized and widely applied nanofiltration membrane, NF90, was in-situ modified through a surface grafting modification method by using 3-sulfopropyl methacrylate potassium salt and initiators. The effects of water electrical conductivity (EC) and fouling types on membrane separation efficiency were examined before and after membrane modification. Results reveal that both the pristine membrane (PTM) and surface grafting modification membrane (SGMM) had a declining permeate flux and salt (NaCl) removal efficiency but an increasing trend of pharmaceuticals and personal care products (PPCPs) removal with increasing water EC from 250 to 10,000 μs cm-1. However, SGMM exhibited a slightly declining permeate flux but 13%-17% and 1%-42% higher rejection of salt and PPCPs, respectively, compared with PTM, due to electrostatic repulsion and size exclusion provided by the grafted polymer. After sodium alginate (SA) and humic acid (HA) fouling, SGMM had 17%-26% and 16%-32% higher salt rejection and 1%-12% and 1%-51% greater PPCP removal, respectively, compared with PTM due to the additional steric barrier layer contributed by the foulants. The successful grafting and increasing hydrophilicity of the SGMM were confirmed by contact angle analysis, which was beneficial for mitigating membrane fouling. Overall, the proposed in-situ surface grafting modification of NF90 can considerably mitigate organic and biological fouling while raising the rejection of salt and PPCPs at different background water EC, which is beneficial for practical applications in producing clean and high quality water for consumers.

Pyridyl-Isonicotinoyl Hydrazone-Bridged Zn(II) Coordination Framework with Thiophenedicarboxylato Link: Structure, Biological Activity, and Electrical Conductivity

Multidimensional applicability of functional materials is one of the focal attractions in today's scientific research. Highly stable and crystalline coordination polymers served as one of the active members in the club of multifunctional materials. Toward this concept, a 3-dimensional (3D) coordination framework, {[Zn2(tdc)2(pcih)2]n} (1) (tdc2-, 2,5-thiophene dicarboxylate; pcih, pyridine-4-carboxaldehyde isonicotinoyl hydrazine), is designed and has been structurally well characterized by single crystal X-ray crystallography. One of the carboxylate groups of tdc2- chelates to Zn(II), while the other carboxylato group (-COO) acts as bridging-O to neighboring Zn(II); the pcih serves as pyridyl-N bridging motif to two Zn(II) centers. The optical band gap, 3.83 eV (Tauc's plot), implies probable semiconducting ability of the material. Interestingly, the device fabricated using compound 1 measures the electrical conductivity, 2.21 × 10-5 S cm-1, and series resistance (Rs), 807 Ω, at the dark phase, which are improved significantly to 6.36 × 10-5 S cm-1 and 460 Ω, respectively, under illumination conditions. Isoniazid, used to synthesize pcih and hence the Zn(II) compound 1, is a medicine; so, the medicinal efficiency of 1 is checked by measuring the anticancer activity against MDA-MB-231, HeLa, HCT-116, and HepG2 cells. It is observed that drug efficacy is highest on MDA-MB-231 cells (IC50: 19.43 ± 1.36 μM) than other cancer cells [IC50: 24.43 ± 2.02 μM (HeLa), 26.06 ± 3.48 μM (HCT-116), and 44.28 ± 3.04 μM (HepG2)]. Therefore, the material has significant contribution in the area of energy and health toward the sustainable development goals.

Determination of dielectric properties of plaster blocks for sealing masonry using non-destructive frequency scanning methods

With the increasing use of traditional and new models of wireless communication systems, the study and determination of the electrical characteristics of materials used in civil construction is an important topic to establish an understanding of how the radio frequency signal behaves inside built environments. This study presents an extensive process of characterization of electrical parameters of plaster blocks used in the construction of walls. Different from the literature where a prior estimation of the data occurs to enable sampling parameters to be obtained, this work proposes an innovative way of obtaining them entirely based on the analysis of the material through frequency measurements, which results in a greater level of precision of the data results. Analyses are made in the frequency range from 0.7 to 5.2 GHz, which has been used for several wireless communication standards. To carry out the electrical characterization of dielectric materials, a non-invasive methodology is proposed based on an innovative combination of the Nicolson-Ross-Weir Method (NRW) and the Ray Tracing Method. Through the proposed methodology and an extensive campaign of measurements using frequency scanning equipment, calculated and experimental data of Shielding Effectiveness (SE), complex relative electrical permittivity, loss tangent, attenuation coefficient and conductivity were obtained for a wide range of frequency, considering different samples of plaster blocks. The obtained results are compared to those available in the related literature, confirming the accuracy of the proposed analysis.

Compact contactless conductometric, ultraviolet photometric and dual-detection cells for capillary electrophoresis via additive manufacturing

The growing demand for tailored detectors in capillary electrophoresis (CE), addressing tasks like field deployment or dual-detection analysis, emphasizes the necessity for compact detection cells. In this work, we propose cost-effective and user-friendly additive manufacturing (3D-printing) approaches to produce such miniaturized detection cells suitable for a range of CE applications. Firstly, capacitively-coupled contactless conductivity detection (C4D) cells of different sizes are fabricated by casting low-melting-point alloy into 3D-printed molds. Various designs of Faraday shields are integrated within the cells and compared. A mini-C4D cell (9.5×7.0×7.5 mm3) is produced, with limits of detection for alkaline cations ranging from 8-12 μM in a short-capillary based CE application. Secondly, ultraviolet photometric (UV-PD) detection cells are fabricated using 3D printing. These cells feature two narrow slits with a width of 60 μm, which are positioned along the path of incident and transmission light to facilitate collimation. A deep UV-LED (235 nm or 255 nm) is employed as the light source, and black resin is determined to be the optimal material for 3D printing the UV-PD cell, owing to its superior UV light absorption capabilities. The UV-PD cell is connected to the LED and photodetector through two optical fibers, making it easy to switch the light source and detector. The effective pathlength and stray light percentage for detecting on a 75 μm id capillary are 74 μm and 0.5 %, respectively. Thirdly, a dual-detection cell that combined C4D and UV-PD at a single detection point is proposed. The performance of direct detection by C4D and indirect detection by UV-PD is compared for detecting organic acids. The strategies for developing cost-effective compact detection cells facilitate the versatile integration of multiple detection methods in CE analysis.

High strength, self-healing sensitive ionogel sensor based on MXene/ionic liquid synergistic conductive network for human-motion detection

Ionogels with both high strength and high conductivity for wearable strain and pressure dual-mode sensors are needed for human motion and health monitoring. Here, multiple hydrogen bonds are introduced through imidazolidinyl urea (IU) as a chain extender to provide high mechanical and self-healing properties for the water-borne polyurethane (WPU). The MXene/ionic liquids synergistic conductive network provides excellent conductivity and also reduces the relative content of ionic liquids to maintain the mechanical properties of the ionogels. The mechanical strength of this ionogel reached 1.81-2.24 MPa and elongation at break reached 570-624%. It also has excellent conductivity (22.7-37.5 mS m-1), gauge factor (GF) (as a strain sensor, GF = 1.8), sensitivity (S) (as a press sensor, S1 = 29.8 kPa-1, S2 = 1.3 kPa-1), and fast response time (as a strain sensor = 185 ms; as a press sensor = 204 ms). The ionogel also exhibits rapid photothermal self-healing capabilities due to the inherent photothermal behavior of MXene. It can maintain good elasticity and conductivity at low temperatures. In addition, this ionogel is able to stretch for 1200 cycles without significant change in the relative change of resistance. The ionogel can be assembled as a strain sensor for monitoring human motion and as a pressure sensor array for obtaining pressure magnitude and position information.

ViTab Transformer Framework for Predicting Induced Electric Field and Focality in Transcranial Magnetic Stimulation

Transcranial magnetic stimulation is an electromagnetic induction-based non-invasive therapeutic technique for neurological diseases. For finding new clinical applications and enhancing the efficacy of TMS in existing neurological disorders, the current study focuses on a deep learning-based prediction model as an alternative to time-consuming electromagnetic (EM) simulation software. The main bottleneck of the existing prediction models is to consider very few input parameters of a standard coil such as coil type and coil position for predicting an output of electric field value. To overcome this limitation, a transformer-based prediction model titled as ViTab transformer is developed in this work to predict electric field (E-max), focality or area of stmulation (S-half), and volume of stimulation (V-half) by considering several input parameters such as sources of MRI images, types of coils, coil position, rate of change of current, brain tissues conductivity, and coil distance from the scalp. The proposed framework consists of a vision and a tab transformer to handle both image and tabular-type data. The prediction performance of the offered model is evaluated in terms of coefficient determination, R2 score, for E-max, V-half, and S-half in the testing phase. The obtained result in terms of R2 score for E-max, V-half, and S-half are found 0.97, 0.87, and 0.90 respectively. The results indicate that the suggested ViTab transformer model can predict electric field as well as focality more accurately than the current state-of-the-art methods. The reduced computational time, as well as efficient prediction accuracy, resembles that ViTab transformer can assist the neuroscientist and neurosurgeon prior to providing superior TMS treatment in near future.

Using dielectrophoretic spectra to identify and separate viable yeast cells

Immotile yeast cells were transiently moved in nonuniform sinusoidal electric fields using multiple pairs of micro-parallel cylindrical electrodes equipped with a sequential signal generator (SSG) to analyze cell viability at a clinical scale for the brewery/fermentation industry. Living yeast cells of Saccharomyces cerevisiae during the exponential-stationary phase, with a cell density of 1.15 × 105 cells mL-1 were suspended in sucrose medium. The conductivity (σs) was adjusted to 0.01 S m-1 with added KCl. Cells exposed in electric field strengths ranging from 32.89 to 40.98 kV m-1, exhibited positive dielectrophoresis (pDEP) with the lower critical frequencies (LCF) at 85.72 ± 3.59 kHz. The optimized value of LCF was shifted upwards to 780.00 ± 83.67 kHz when σswas increased to 0.10 S m-1. Dielectrophoretic and LCF spectra (translational speed of cells vs. electric field frequencies) of yeast suspensions during positive dielectrophoresis were analyzed in terms of the dielectric properties of the cell membrane and cytoplasm which reflect yeast cell viability and metabolic health status. The dielectrophoretic collection yield of cells using positive dielectrophoresis was reported on the monitor of sequential signal generator software to evaluate the number of living and dead cells through a real-time image processing analyzer. The spectra of both positive dielectrophoresis of the living and dead cells had distinguishable dielectric properties. The conductivity of the yeast cytoplasm (σc) of the dead cells was significantly less (≈ ≤ 0.05 S m-1) than that of the living yeast cells which typically had a cytoplasmic conductivity of ≈ 0.2 S m-1. This difference between viable and non-viable cells is sufficient for cell separation procedures. KEY POINTS: • Dielectrophoresis can be used to separate viable and non-viable yeast cells, • Cellular dielectric properties can be derived from the analysis of their dielectric spectra, • Cytoplasmic conductivity of viable cells is ≈ 0.2 S m-1 while that of non-viable cells ≈ ≤ 0.05 S m-1.

Pressure-Poisson equation in numerical simulation of cerebral arterial circulation and its effect on the electrical conductivity of the brain

BACKGROUND AND OBJECTIVE

This study considers dynamic modeling of the cerebral arterial circulation and reconstructing an atlas for the electrical conductivity of the brain. Electrical conductivity is a governing parameter in several electrophysiological modalities applied in neuroscience, such as electroencephalography (EEG), transcranial electrical stimulation (tES), and electrical impedance tomography (EIT). While high-resolution 7-Tesla (T) Magnetic Resonance Imaging (MRI) data allow for reconstructing the cerebral arteries with a cross-sectional diameter larger than the voxel size, electrical conductivity cannot be directly inferred from MRI data. Brain models of electrophysiology typically associate each brain tissue compartment with a constant electrical conductivity, omitting any dynamic effects of cerebral blood circulation. Incorporating those effects poses the challenge of solving a system of incompressible Navier-Stokes equations (NSEs) in a realistic multi-compartment head model. However, using a simplified circulation model is well-motivated since, on the one hand, the complete system does not always have a numerically stable solution and, on the other hand, the full set of arteries cannot be perfectly reconstructed from the MRI data, meaning that any solution will be approximative.

METHODS

We postulate that circulation in the distinguishable arteries can be estimated via the pressure-Poisson equation (PPE), which is coupled with Fick's law of diffusion for microcirculation. To establish a fluid exchange model between arteries and microarteries, a boundary condition derived from the Hagen-Poisseuille model is applied. The relationship between the estimated volumetric blood concentration and the electrical conductivity of the brain tissue is approximated through Archie's law for fluid flow in porous media.

RESULTS

Through the formulation of the PPE and a set of boundary conditions (BCs) based on the Hagen-Poisseuille model, we obtained an equivalent formulation of the incompressible Stokes equation (SE). Thus, allowing effective blood pressure estimation in cerebral arteries segmented from open 7T MRI data.

CONCLUSIONS

As a result of this research, we developed and built a useful modeling framework that accounts for the effects of dynamic blood flow on a novel MRI-based electrical conductivity atlas. The electrical conductivity perturbation obtained in numerical experiments has an appropriate overall match with previous studies on this subject. Further research to validate these results will be necessary.

A multifunctional sensor for real-time monitoring and pro-healing of frostbite wounds

Flexible epidermal sensors based on conductive hydrogels hold great promise for various applications, such as wearable electronics and personal healthcare monitoring. However, the integration of conductive hydrogel epidermal sensors into multiple applications remains challenging. In this study, a multifunctional PAAm/PEG/hydrolyzed keratin (Hereinafter referred to as HK)/MXene conductive hydrogel (PPHM hydrogel) was designed as a high-performance therapeutic all-in-one epidermal sensor. This sensor not only accelerates wound healing but also provides wearable human-computer interaction. The developed sensor possesses highly sensitive sensing properties (Gauge Factor = 4.82 at high strain), strong mechanical tensile properties (capable of achieving a maximum elongation at break of 600 %), rapid self-healing capability, stable self-adhesive capability, biocompatibility, freeze resistance at -20 °C, and adjustable photo-thermal conversion capability. This therapeutic all-in-one sensor can sensitively monitor human movements, enabling the detection of small electrophysiological signals for diagnosing relevant activities and diseases. Furthermore, using a rat frostbite model, we demonstrated that the composite hydrogel sensor can serve as an effective wound dressing to accelerate the healing process. This study serves as a valuable reference for the development of multifunctional flexible epidermal sensors for personal smart health monitoring. STATEMENT OF SIGNIFICANCE: Accelerated wound healing reduces the risk of wound infection, and conductive hydrogel-based sensors can monitor physiological signals. The multifunctional application of conductive hydrogel sensors combined with wound diagnostic and therapeutic capabilities can meet personalized medical requirements for wound healing and sensor monitoring. The aim of this study is to develop a multifunctional hydrogel patch. The multifunctional hydrogel can be assembled into a flexible wearable high-performance diagnostic and therapeutic integrated sensor that can effectively accelerate the healing of frostbite wounds and satisfy the real-time monitoring of multi-application scenarios. We expect that this study will inform efforts to integrate wound therapy and sensor monitoring.

Full dynamic control of dairy wastewater treatment by aerobic granular sludge using electric conductivity and oxygen uptake rate

The objective of the current study was to determine the applicability of a sensor-based dynamic control strategy for the treatment of real variable dairy wastewater by aerobic granular sludge (AGS) performing enhanced biological phosphorus removal (EBPR). Two parallel sequencing batch reactors (SBRs) were set up that used only an anaerobic feast/aerobic famine microbial selection strategy to successfully obtain sludge granulation. SBR-STA used a fixed cycle length, while the duration of the reaction steps in SBR-DYN was variable. The control strategy was based solely on (derived) signals from low-cost and common sensors. The profile of the electric conductivity during the anaerobic reaction step was related to the microbial release of phosphate (PO4-P) and the associated uptake of dissolved organic carbon (DOC) by polyphosphate-accumulating organisms (PAOs). Control of the aerobic reaction step was based on the oxygen uptake rate (OUR). This resulted in a dynamic reactor operation with significant efficiency gains, such as 32% shorter cycle times and 42% higher sludge loading rates without impairing the effluent quality. These results extend the existing potential of indirect control strategies to full biological nutrient removal processes, which may be of great assistance to the operators and designers of industrial installations.

Braided scaffolds with polypyrrole/polydopamine/hydroxyapatite coatings with electrical conductivity and osteogenic properties for bone tissue engineering

When impaired bones are grafted with bone scaffolds, the behaviors of osteoblast are dependent on the implant materials and surface morphology. To this end, we modulated the surface morphology of scaffolds that promote cell growth. In this study, ice-template and spraying method methods are employed to coat different proportions of PDA and PPy over the PLA/PVA weaving scaffolds, after which HA is Coated over via the electrochemical deposition, forming weaving scaffolds with electrically conductive PDA/PPy/HA coating. The test results indicate that with a PPy/PDA concentration ratio is 30, the PPy particles are more uniformly distributed on the fiber surface. The scaffolds are wrapped in a HA coating layer with a high purity, and calcium and phosphorus elements are evenly dispersed with a Ca/P ratio being 1.69. Owing to the synergistic effect between PDA and PPy coating, the scaffolds demonstrate excellent electrochemical stability and electrochemical activity. The biological activity of the scaffold increased to 274.66% under electrical stimulation. The new thinking proposed by this study extends the worth of applying textile structure to the medical field, the application of which highly increases the prospect of bone tissue engineering.

Adsorption of Tunable aryl alkyl ionic liquids (TILs) on the graphene and Defective graphene nanosheets: A DFT Study

Optical and electronic characteristics of the graphene nanosheets (GNS) could be altered by some structural defects such as double-vacancy and Stone-Wales ones. The physisorption manner of [MPI][BF4], [MPT1][BF4], [MPT2][BF4], and [MPTT][BF4] ionic liquids on intact and defective GNS surfaces were investigated using M06-2X/cc-pVDZ computational method. Capability for adsorption on the DV and SW graphene surfaces by TILs is increased by about 1.0-4.3 and 0.4-2.0 kcal/mol respectively. The electrostatic potential of the GNS-DV surface is more negative than the GNS-SW one which enables it to interact with cation parts of the adsorbed TILs so extensively. The highest adsorption energy belongs to the [MPI][BF4]/GNS-DV system. Adsorption of the TILs on the GNS surfaces leads to a decrease in the energy of the LUMO molecular orbital as well as their energy gap of them. Results revealed that the electrical conductivity, as well as absorption spectra of the GNS surfaces, are affected by TILs adsorption and defect nature.

Improved Configurations for 3D Acoustoelectric Tomography With a Minimal Number of Electrodes

OBJECTIVE

Acoustoelectric tomography (AET) is a hybrid imaging technique combining ultrasound and electrical impedance tomography (EIT). It exploits the acoustoelectric effect (AAE): an US wave propagating through the medium induces a local change in conductivity, depending on the acoustoelectric properties of the medium. Typically, AET image reconstruction is limited to 2D and most cases employ a large number of surface electrodes.

METHODS

This article investigates the detectability of contrasts in AET. We characterize the AEE signal as a function of the medium conductivity and electrode placement, using a novel 3D analytical model of the AET forward problem. The proposed model is compared to a finite element method simulation.

RESULTS

In a cylindrical geometry with an inclusion contrast of 5 times the background and two pairs of electrodes, the maximum, minimum, and mean suppression of the AEE signal are 68.5%, 3.12%, and 49.0%, respectively, over a random scan of electrode positions. The proposed model is compared to a finite element method simulation and the minimum mesh sizes required successfully model the signal is estimated.

CONCLUSION

We show that the coupling of AAE and EIT leads to a suppressed signal and the magnitude of the reduction is a function of geometry of the medium, contrast and electrode locations.

SIGNIFICANCE

This model can aid in the reconstruction of AET images involving a minimum number of electrodes to determine the optimal electrode placement.

High performance of membrane capacitive deionization with ZnS/g-C3N4 composite electrodes

Capacitive deionization (CDI) is considered a promising technology for desalination of sea or brackish water. In this study, a ZnS/g-C3N4 composite was synthesized through a one-step high-temperature method and used as the main material to fabricate CDI electrodes. The results of SEM and TEM showed that spherical-like nanoparticles of ZnS were uniformly distributed on the g-C3N4 sheet. The g-C3N4 phase facilitates the ZnS particles precipitate and restrain their agglomeration, which contributes to a high specific surface area of ZnS. Furthermore, the electrochemical test results indicated that ZnS/g-C3N4 composite had a good capacitance characteristic, low resistance, and high electrochemical stability. Finally, the desalinization performance of the ZnS/g-C3N4 composite electrodes was tested in traditional mode and membrane capacitive deionization (MCDI) mode. The results showed that ZnS/g-C3N4//ZnS/g-C3N4 (MCDI) exhibited an optimal desalination capacity. The adsorption amount was 27.65, 50.26, and 65.34 mg/g for NaCl initial concentration of 200, 400, and 600 mg/L, respectively, with the voltage of 1.2 V and flow rate of 5 mL/min. Increasing initial concentration enhanced the conductivity and ion migration rate so as to increase the NaCl adsorption amount. ZnS/g-C3N4 composite can be used as potential electrode material for high performance of MCDI.

Aldehyde modified cellulose-based dual stimuli responsive multiple cross-linked network ionic hydrogel toward ionic skin and aquatic environment communication sensors

Recently, materials with complicated environmentally-sensitive abilities, high stretchability and excellent conductive sensitivity are interesting actuators in future applications. Herein, we fabricated a versatile and facile polyvinyl alcohol/polyacrylic acid/dialdehyde cellulose nanofibrils-Fe3+ hydrogel integrated with programmable dual-shape memory properties, high mechanical strength, good recoverability, and heat-induced self-healing capability. Benefiting from the synergistic effect of hydrogen bonds and dual metal coordination bonds of cellulose-based dialdehyde and carboxyl with Fe3+and then heating-freeze-thawing cycle treatment, the obtained hydrogel exhibited dual shape memory abilities, high tensile strain (up to 600 %), good self-recovery, and anti-fatigue properties. Moreover, the resultant hydrogel sensors showed revealed high strain sensitivity (gauge factor = 2.95) and satisfactory electrochemical performance; and such hydrogel-based sensor could be used as ionic skin to detect various human motions in real-time and barrier-free communication in the aquatic environment. The composite hydrogel with superior and versatile performances reported in this study could offer a great promise to be applied under extreme conditions as multifunctional sensors.

Depth profiling via nanoindentation for characterisation of the elastic modulus and hydraulic properties of thin hydrogel layers

The accurate determination of the mechanical properties of hydrogels is of fundamental importance for a range of applications, including in assessing the effect of stiffness on cell behaviour. This is a particular issue when using thin hydrogel layers adherent to stiff substrate supports, as the apparent stiffness can be significantly influenced by the constraint of the underlying impermeable substrate, leading to inaccurate measurements of the elastic modulus and permeability of thin hydrogel layers. This study used depth profiling nanoindentation and a poroelastic model for spherical indentation to identify the elastic moduli and hydraulic conductivity of thin polyacrylamide (PAAm) hydrogel layers (∼27 μm-782 μm thick) on impermeable substrates. The apparent stiffness of thin PAAm layers increased with indentation depth and was significantly greater than those of thicker hydrogels, which showed no influence of indentation depth. The hydraulic conductivity decreased as the geometrical confinement of hydrogels increased, indicating that the fluid became more constrained within the confinement areas. The impact of geometrical confinement on the apparent modulus and hydraulic conductivity of thin PAAm hydrogel layers was then established, and their elastic moduli and intrinsic permeability were determined in relation to this effect. This study offers valuable insights into the mechanical characterisation of thin PAAm hydrogel layers used for the fundamental study of cell mechanobiology.

Musa acuminata as electroporation model

Electrochemotherapy (ECT) and Irreversible electroporation (IRE) are cancer treatments based on electric field distribution in tissues. Solanum tuberosum (potato tissue) phantom is known to mimic changes in the electrical conductivity that occur in animal tissues during electroporation (EP). Electric field distribution is assessed through enzymatic staining. However, the 24-h wait for this assessment could slow agile response scenarios. We developed and validated the Musa acuminata (cavendish banana) conductivity model, which quickly evaluates EP by tissue staining. We investigated the frequency response of the tissue using impedance spectroscopy analysis, conductivity changes, and enzymatic staining. We optimized three usual EP models: adapted Gompertz, smoothed Heaviside, and the sigmoid or logistic function. We found dielectric parameters in banana tissue similar to those in potato (electrical conductivity of 0.035 S/m and relative permittivity of 4.1×104). The coefficients of determination R2 were 99.94% (Gompertz), 99.85% (Heaviside), and 99.58% (sigmoid). The sigmoid and Heaviside functions described the calibration and validation electric currents with 95% confidence. We observed the electroporated areas in bananas 3h30m after EP. Staining was significant after 450 V/cm. The conductivity model of Musa acuminata suits treatment planning, hardware development, and training scenarios. Banana phantom supports the 3Rs practice and is a reliable alternative for potato in EP studies.

Effect of Mn, N co-doped LiFePO4 on electrochemical and mechanical properties: A DFT study

In this study, the thermodynamic stability, embedding voltage, volume change rate, electronic structure properties, mechanical properties and lithium-ion diffusion characteristics of the Mn, N co-doped LiFePO4 material are investigated using a first-principles approach based on density generalization theory. The results show that the doped system has a low formation energy and the material meets the thermodynamic stability criteria. During the de-lithium process, the volume change rate of the doped material decreases and the cycling performance is improved, but the battery energy density decreases slightly. It is also found that the doping of N led to the transformation of the material from a p-type semiconductor to an N-type semiconductor, while the doping of Mn and N lead to the creation of impurity bands, narrowing of the band gap and an increase in conductivity. At the same time, Mn, N co-doping greatly improve the ductility of the material, suppress the generation of microcracks, and reduce the possibility of shear deformation. In addition, it is noteworthy that the lithium-ion diffusion energy barrier of the doped system is reduced, which predicts an increase in the diffusion rate of lithium ions in the doped system.

Flexible and Scalable Dry Conductive Elastomeric Nanocomposites for Surface Stimulation Applications

OBJECTIVE

The study describes the development and testing of a dry surface stimulation flexible electrode (herein referred to as Flexatrode), a low-cost, flexible, and scalable elastomeric nanocomposite using carbon black (CB) and polydimethylsiloxane (PDMS).

METHODS

Flexatrodes composed of CB and PDMS were developed and tested for mechanical and functional stability up to 7 days. Uniform CB distribution was achieved by optimizing the dispersion process using toluene and methyl-terminated PDMS. Electromechanical testing in the through thickness directions over a long-term duration demonstrated stability of Flexatrode. Thermal stability of Flexatrode for up to a week was tested and validated, thus mitigating concerns of heat generation and deleterious skin reactions such as vasodilation or erythema.

RESULTS

25 wt.% CB was determined to be the optimal concentration. Electrical and thermal stability were demonstrated in the through thickness direction.

CONCLUSION

Flexatrode provides stable electrical properties combined with high flexibility and elasticity. Electrotherapy treated chronic wounds were 81.9% smaller than baseline at day 10. Wounds that received an inactive device (device without any electrical stimulation) were 58.1% smaller than baseline and wounds that received standard of care treatment were 62.2% smaller than baseline.

SIGNIFICANCE

The increasing need for wearable bioelectronics requiring long-term monitoring/treatment has highlighted the limitations of sustained use of gel-based electrodes. These can include skin irritation, bacterial overgrowth at the electrode site, gel dehydration over time, and signal degradation due to eccrine sweat formation. Flexatrode provides stable performance in a nanocomposite with scalable fabrication, thus providing a promising platform technology for wearable bioelectronics.

Study on the dielectrophoretic characteristics of malaria-infected red blood cells

Malaria is a tropical disease caused by parasites in the genus Plasmodium, which still presents 241 million cases and nearly 627,000 deaths recently. In this work, we used the dielectrophoresis (DEP) to characterize red blood cells in a microchannel. The purpose of this work is to determine the difference between the normal and the malaria-infected cells based on the DEP characteristics. The samples were infected cells and normal red blood cells, which were either prepared in culture or obtained from volunteers. Diamond-shaped and curved micropillars were used to create different degrees of DEP in the gap between them. The DEP crossover frequencies were observed with the diamond-shaped micropillars. The cell velocity under negative dielectrophoresis (nDEP) at a low frequency was examined with the curved micropillars. The measured lower crossover frequencies were remarkably different between the malaria-infected cells and the normal cells, whereas the higher crossover frequencies were similar among the samples. The velocity under nDEP was lower for the infected cells than the normal cells. The results imply that the malaria infection significantly decreases the capacitance but increases the conductance of the cell membrane, whereas a change in cytoplasmic conductivity may occur in a later stage of infection.

Dual detection of human motion and glucose in sweat with polydopamine and glucose oxidase doped self-healing nanocomposite hydrogels

The detection of human motion and sweat composition are important for human health or sports training, so it is necessary to develop flexible sensors for monitoring exercise processes and sweat detection. Mussel secretion of adhesion proteins enables self-healing of byssus and adhesion to surfaces. We prepared Au nanoparticles@polydopamine (AuNPs@PDA) nanomaterials based on mussel-inspired chemistry and compounded them with polyvinyl alcohol (PVA) hydrogels to obtain PVA/AuNPs@PDA self-healing nanocomposite hydrogels. Dopamine (DA) was coated on the surface of AuNPs to obtain AuNPs based composite (AuNPs@PDA) and the AuNPs@PDA was implanted into the PVA hydrogels to obtain nanocomposite hydrogel through facile freeze-thaw cycle. Glucose oxidase (GOD) was added to the hydrogel matrix to achieve specific detection of glucose in sweat. The obtained hydrogels exhibit high deformability (573.7 %), excellent mechanical strength (550.3 KPa) and self-healing properties (85.1 %). The PVA/AuNPs@PDA hydrogel sensors exhibit quick response time (185.0 ms), wide strain sensing range (0-500 %), superior stability and anti-fatigue properties in motion detection. The detection of glucose had wide concentration detection range (1.0 μmol/L-200.0 μmol/L), low detection limits (0.9 μmol/L) and high sensitivity (24.4 μA/mM). This work proposes a reference method in dual detection of human exercise and sweat composition analysis.

Biomimetic Antibacterial Gelatin Hydrogels with Multifunctional Properties for Biomedical Applications

A facile novel approach of introducing dopamine and [2-(methacryloyloxy) ethyl] dimethyl-(3-sulfopropyl) ammonium hydroxide via dopamine-triggered in situ synthesis into gelatin hydrogels in the presence of ZnSO4 is presented in this study. Remarkably, the resulting hydrogels showed 99.99 and 100% antibacterial efficiency against Gram-positive and Gram-negative bacteria, respectively, making them the highest performing surfaces in their class. Furthermore, the hydrogels showed adhesive properties, self-healing ability, antifreeze properties, electrical conductivity, fatigue resistance, and mechanical stability from -100 to 80 °C. The added multifunctional performance overcomes several disadvantages of gelatin-based hydrogels such as poor mechanical properties and limited thermostability. Overall, the newly developed hydrogels show significant potential for numerous biomedical applications, such as wearable monitoring sensors and antibacterial coatings.

A facile strategy to fabricate a skin-like hydrogel with adhesive and highly stretchable attributes through small molecule triggering toward flexible electronics

Polyacrylamide hydrogel is a promising matrix in biomedical applications due to its biocompatibility, transparency and flexibility. However, its implementation in skin-attachable applications is impeded by its inherent deficiency in surface-adaptive adhesion and inadequate mechanical conformity to skin tissues. Herein, tris, a biocompatible small molecule with a triple hydrogen bonding cluster in its molecule structure, is introduced for the first time into a polyacrylamide hydrogel. This incorporation is achieved via a facile one-pot strategy, resulting in a highly stretchable hydrogel with an impressive strain capacity (2574.75 ± 28.19%), a human dermis tissue-compatible Young's modulus (27.89 ± 2.05 kPa) and an intrinsically universal adhesion capacity (16.66 ± 0.32 N). These superior properties are attributed to the elevated hydrogen bonding density and the plasticizing effect induced by tris, without compromising the hydrogel's excellent transparency (>90% transmittance). Moreover, by incorporating calcium ions into the resulting soft adhesive hydrogel, we demonstrate its utility in skin-like sensors, leading to a substantial enhancement in strain sensitivity and electrical conductivity, in conjunction with the plasticizing influence exerted by tris. This work offers a facile and environmentally friendly solution to fabricate ultra-stretchable adhesive polyacrylamide hydrogel matrixes for dynamic surfaces, even under large deformation, which can broaden their potential applications in integrated bioelectronics.

Method for obtaining reliable R-waves in fish electrocardiograms by utilizing conductivity of seawater

A simple method for measuring bioelectric signals of fish in seawater is expected for managing the health of farmed fish and clarifying the ecophysiology of natural fish. We previously proposed a simple and unique method for measuring bioelectric signals of fish by inserting only one special internal electrode (which can be isolated from seawater) into the fish's body and by sinking an external electrode in seawater (for utilizing the conductivity of seawater). However, the proposed method could not obtain fish electrocardiograms (ECGs) with reliable R-waves in the same manner as the conventional method. In this study, we thus experimentally investigated whether the R-waves of ECGs could be observed by optimizing the insertion position of the internal electrode into the fish's body. The results of the experiment show that for four species of fish (each slightly longer than 10 cm) with different body shapes, reliable R-waves could be observed by inserting the internal electrode near the heart. We also investigated the possibility of simultaneously measuring ECGs of multiple fish by the proposed method. The results of the investigation show that the fish ECGs with R-waves of three fish could be observed simultaneously even when one single common external electrode replaced multiple external electrodes. This result indicates the advantage of the proposed method in reducing the total number of bioelectrodes compared to the conventional method for ECG measurements of multiple fish.

Continuous-flow electrorotation (cROT): improved throughput characterization for dielectric properties of cancer cells

This paper presents the concept of a newly developed high-throughput measurement device for determining the dielectric properties of cancer cells. The proposed continuous-flow electrorotation (cROT) device can induce electrorotation (ROT) with vertical rotation using two sets of interdigitated electrodes on the top and bottom substrates to torque the cells. In the developed device, multiple rotating cells flowing in a microchannel are aligned between electrodes using dielectrophoresis. This allows for the measurement of the rotational behavior of the cells with continuous flow, resulting in a significant improvement in throughput compared to the conventional ROT devices reported previously. The dielectric properties, permittivity of the cell membrane and conductivity of the cell cytoplasm, of HeLa cells obtained by simultaneous measurements using the developed cROT device were 9.13 ± 1.02 and 0.93 ± 0.10 S m-1, respectively. Moreover, the measurement throughput was successfully increased to 2700 cells per h using the cROT technique.

Variable sensitivity multimaterial robotic e-skin combining electronic and ionic conductivity using electrical impedance tomography

Electronic skins (e-skins) aim to replicate the capabilities of human skin by integrating electronic components and advanced materials into a flexible, thin, and stretchable substrate. Electrical impedance tomography (EIT) has recently been adopted in the area of e-skin thanks to its robustness and simplicity of fabrication compared to previous methods. However, the most common EIT configurations have limitations in terms of low sensitivities in areas far from the electrodes. Here we combine two piezoresistive materials with different conductivities and charge carriers, creating anisotropy in the sensitive part of the e-skin. The bottom layer consists of an ionically conducting hydrogel, while the top layer is a self-healing composite that conducts electrons through a percolating carbon black network. By changing the pattern of the top layer, the resulting distribution of currents in the e-skin can be tuned to locally adapt the sensitivity. This approach can be used to biomimetically adjust the sensitivities of different regions of the skin. It was demonstrated how the sensitivity increased by 500% and the localization error reduced by 40% compared to the homogeneous case, eliminating the lower sensitivity regions. This principle enables integrating the various sensing capabilities of our skins into complex 3D geometries. In addition, both layers of the developed e-skin have self-healing capabilities, showing no statistically significant difference in localization performance before the damage and after healing. The self-healing bilayer e-skin could recover full sensing capabilities after healing of severe damage.

Electrical stimulation via repeated biphasic conducting materials for peripheral nerve regeneration

Improved materials for peripheral nerve repair are needed for the advancement of new surgical techniques in fields spanning from oncology to trauma. In this study, we developed bioresorbable materials capable of producing repeated electric field gradients spaced 600 μm apart to assess the impact on neuronal cell growth, and migration. Electrically conductive, biphasic composites comprised of poly (glycerol) sebacate acrylate (PGSA) alone, and doped with poly (pyrrole) (PPy), were prepared to create alternating segments with high and low electrically conductivity. Conductivity measurements demonstrated that 0.05% PPy added to PSA achieved an optimal value of 1.25 × 10-4 S/cm, for subsequent electrical stimulation. Tensile testing and degradation of PPy doped and undoped PGSA determined that 35-40% acrylation of PGSA matched nerve mechanical properties. Both fibroblast and neuronal cells thrived when cultured upon the composite. Biphasic PGSA/PPy sheets seeded with neuronal cells stimulated for with 3 V, 20 Hz demonstrated a 5x cell increase with 1 day of stimulation and up to a 10x cell increase with 3 days stimulation compared to non-stimulated composites. Tubular conduits composed of repeated high and low conductivity materials suitable for implantation in the rat sciatic nerve model for nerve repair were evaluated in vivo and were superior to silicone conduits. These results suggest that biphasic conducting conduits capable of maintaining mechanical properties without inducing compression injuries while generating repeated electric fields are a promising tool for acceleration of peripheral nerve repair to previously untreatable patients.

Flexible Silica/MXene/Natural rubber film strain sensors with island chain structure for Healthcare monitoring

The demand for flexible strain sensors with high sensitivity and durability has increased significantly. However, traditional sensors are limited in terms of their detection ranges and fabrications. In this work, a space stacking method was proposed to fabricate natural rubber (NR)/ Ti3C2Tx (MXene)/silica (SiO2) films that possessed exceptional electrical conductivity, sensitivity and reliability. The introduction of SiO2 into the NR/MXene composite enabled the construction of an "island-chain structure", which promoted the formation of conductive pathways and significantly improved the conductivity of the composite. Specifically, the electrical conductivity of the NR/MXene/10 wt%SiO2 composite was enhanced by about 200 times compared to that of the NR/MXene composite alone (from 0.07 to 13.4 S/m). Additionally, the "island-chain structure" further enhanced the sensing properties of the NR/MXene/10 wt%SiO2 composite, as evidenced by its excellent sensitivity (GF = 189.2), rapid response time (102 ms), and good repeatability over 10,000 cycles. The fabricated device demonstrates an outstanding mechanical sensing performance and can accurately detect human physiological signals. Specifically, the device serves as a strain detector, recognizing different strain signals by monitoring the movement of fingers, arms, and thighs. This study provides critical insights into composite manufacturing with exceptional conductivity, flexibility and stability, which are essential properties for creating high-performance flexible sensors.

Starch/polyvinyl alcohol with ionic liquid/graphene oxide enabled highly tough, conductive and freezing-resistance hydrogels for multimodal wearable sensors

With ever-growing demand for eco-friendly materials for wearable electronics, biopolymer-based hydrogels have drawn significant attention. As one of the most abundant and biodegradable biopolymers, starch-based hydrogels have a great potential for wearable electronics. However, mechanical fragility, low conductivity and subzero freeze restrict their applications. Here, a multifunctional hydrogel was facilely fabricated by integrating ionic liquid and graphene oxide into potato starch/polyvinyl alcohol skeleton via a green physical-crosslinking method. The abundant hydrogen-bond and electrostatic interactions endowed the hydrogel with excellent stretchability (657.5 %), strength (0.64 MPa), high conductivity (1.98 S·m-1) and good anti-freezing property (< -20 °C). Multiple characterizations and theoretical simulation (DFT) were combined to understand and confirm the interactions among different components. Taking advantage of these properties, multimodal wearable sensors were constructed for sensing tension (gauge factor: 6.04), compression (gauge factor: 3.27) and temperature (sensitivity: 0.71 %/°C), which are applied for monitoring human motion, daily-life pressure and body temperature. The sensor had a good anti-fatigue property with stable signals during 2000 cycles. Moreover, the sensor can effectively recognize handwriting and perform human-computer interaction. This work provides a promising route to develop sustainable and multifunctional biopolymer hydrogels for wearable sensors with versatile applications in human health, exercise monitors and soft robots.

Highly Sensitive Flexible Sensors for Human Activity Monitoring and Personal Healthcare

Flexible sensors are capable of converting multiple human physiological signals into electrical signals for various applications in clinical diagnostics, athletics, and human-machine interaction. High-performance flexible strain sensors are particularly desirable for sensitive, reliable, and long-term monitoring, but current applications are still constrained due to high response threshold, low recoverability properties, and complex preparation methods. In this study, we present a stable and flexible strain sensor by a cost-effective self-assemble approach that demonstrates remarkable sensitivity (2169), ultrafast response and recovery time (112 ms), and wide dynamic response range (0-50%), as confirmed in human pulse and human-computer interaction. These excellent performances can be attributed to the design of a Polydimethylsiloxane (PDMS) substrate integrated with multiwalled carbon nanotubes (MWCNT) and graphene nanosheets (GNFs), which results in high electrical conductivity. The MWCNT serves as a bridge, connecting the GNFs to create an efficient conductive path even under a strain of 50%. We also demonstrate the strain sensor's capability in weak physiological signal pulse measurement and excellent resistance to mechanical fatigue. Moreover, the sensor shows diverse sensitivities in various tensile states with different signal patterns, making it highly suitable for full-range human monitoring and flexible wearable systems.

Multifunctional, Self-Adhesive MXene-Based Hydrogel Flexible Strain Sensors for Hand-Written Digit Recognition with Assistance of Deep Learning

The conductive hydrogel as a flexible sensor not only has certain mechanical flexibility but also can be used in the field of human health detection and human-computer interaction. Herein, by introduction of tannic acid (TA) with MXene into the polyacrylamide (PAM)/carboxymethyl chitosan (CMC) double-network hydrogel, a hydrogel with high stretchability, self-adhesion, and high sensitivity was prepared. CMC and PAM form a semi-interpenetrating double-network of high toughness and durability through electrostatic interactions and multiple hydrogen bonding networks. The abundant hydrophilic functional groups on TA and MXene form multiple hydrogen bonds simultaneously with the polymer network, ensuring high stretchability and sensitivity of the hydrogel. The hydrogel can display an accurate response to a variety of stimulus signals and can monitor both human joint movements and small physiological signal changes. It can also be combined with deep learning algorithms to classify handwritten digits with an accuracy rate of 98%. This work can promote the application of hydrogel sensors with durability and high sensitivity. The combination of algorithms and flexible sensors provides important ideas for the further development of flexible devices.

Evaluation of aquifer parameters through integrated approach of geophysical investigations, pumping test analysis and Dar-Zarrouk parameters in the central part of Bari Doab, Punjab, Pakistan

In the central part of Bari Doab in Punjab Province of Pakistan, the factors such as sporadic rainfall pattern, decrement of water in rivers, subsurface salinity and excessive mining of groundwater have badly affected the hydrogeology and recharge system of aquifer. The present research work is an endeavour to evaluate the characteristics and potential of aquifer for its future sustainable availability within the study area of central part of Bari Doab. The geophysical studies, pumping tests data, borehole logs and Dar-Zarrouk parameters were used integrally to evaluate the aquifer hydraulic and hydrologic parameters in the study area. VES technique of geophysical investigations using Schlumberger electrodes configuration was carried out at sparsely distributed 435 locations. Litho-logs and VES results altogether decipher that the subsurface alluvial succession is primarily composed of intermixed layers of sand, gravel, clay, silt and some kankar inclusions. The VES data allied with pumping test analysis of test wells in the study area were used to evaluate the aquifer hydraulic properties. Comparatively low values of discharge rate, hydraulic conductivity and transmissivity were evaluated in two wells whilst relatively higher values of these parameters were evaluated in rest of six wells. The results of hydrologic parameters also confirm the results of hydraulic parameters in the wells. Finally, the Dar-Zarrouk parameters were used for the estimation of hydraulic parameters for whole study area and the aquifer zones of relatively high and low potential were delineated.

Extraction performance of electromembrane extraction and liquid-phase microextraction in prototype equipment

In this comparative study, the performance of liquid-phase microextraction and electromembrane extraction in prototype equipment was evaluated for extraction of ninety basic substances from plasma. Using a commercial EME device based on conductive vials enabled a standardized and comprehensive comparison between the two methods. Extractions were performed from a pH-adjusted donor solution, across an organic liquid membrane immobilized in a porous polypropylene membrane, and into an acidic acceptor solution. In LPME, dodecyl acetate was used as the extraction solvent, while 2-nitrophenyl octyl ether was used for EME with an electric field applied across the system. To assess the extraction performance, extraction recovery plots and extraction time curves were constructed and analyzed. These plots provided insights into the efficiency and effectiveness of LPME and EME, allowing users to make better decisions about the most suitable method for a specific bioanalytical application. Both LPME and EME were effective for substances with 2.0 < log P < 4.0, with EME showing faster extraction kinetics. Small (200 µL) and large vials (600 µL) were compared, showing that smaller vials improved kinetics markedly in both techniques. Carrier-mediated extraction showed improved performance for analytes with log P < 2 in EME, however, with some limitations due to system instability. This is, to our knowledge, the first time LPME was performed in the commercial vial-based equipment. An evaluation of vial-based LPME investigating linearity, precision, accuracy, and matrix effects showed promising results. These findings contribute to a general understanding of the performance differences in vial-based LPME and EME.

The cavity perturbation method for evaluating hematocrit via dielectric properties

The physical parameters of human blood (complex permittivity and conductivity) at microwave frequencies have been investigated to assess the hematocrit (HCT). The cavity perturbation method based on a rectangular cavity operated in TE101mode at frequency 4.212 GHz has been utilized to measure the permittivity of blood with different hematocrit % at a range of temperatures. According to the results, the dielectric constant, loss factor, and conductivity appeared to be influenced by HCT level. Though the dielectric constant is the only parameter that shows clear linear regression decreasing behavior with a correlation value around (R2= 0.93). For thirty healthy donors the dielectric constant decreases from (65.61 ± 1.4 to 44.64 ± 4.0) and from (65.3 ± 1.2 to 48.3 ± 1.88) for men and women, respectively, with increasing hematocrit percentage from 20% HCT up to 95% HCT. The temperature dependence of the dielectric constant is also examined in the temperature range 27 °C-50 °C and the results display a slight decrease in dielectric constant with elevation temperature. The temperature-dependence dielectric constant of water and blood samples were fitted to an empirical polynomial with temperature. A comparison of estimated HCT using the cavity technique based on dielectric properties shows a very good agreement with commercially standard HCT measurement methods. Finally, the cavity technique can be applied to measure the hematocrit up to high values based on the dielectric constant with high precision, simplicity, and low cost compared with traditional techniques.

Exploring the electrochemical properties of CuSe-decorated NiSe2 nanocubes for battery-supercapacitor hybrid devices

Chalcogenides, a promising class of electrode materials, attracted massive popularity owing to their exciting features of high conductive nature, high capacity, rich redox activities, and structural functionalities, making them the first choice for the electrochemical energy domain. This paper reported a new NiSe2-CuSe nanocomposite prepared via a wet-chemical synthesis followed by a low-cost and simple hydrothermal reaction. The physical characterization showed cubes and nanoparticles type morphological features of NiSe2 and CuSe products, while their composite reveals a combined morphological characteristic. The electrochemical properties were tested in an aqueous solution, demonstrating that the NiSe2-CuSe nanocomposite exhibits a high capacity of 376 C g-1, low resistance, good reversibility and rate capability in a three-electrode mode than bulk counterparts. For practical aspects, a battery-hybrid supercapacitor (BHSC) is developed with NiSe2-CuSe nanocomposite, and activated carbon (AC) serves as cathode and anode in two-cell mode operation. The built NiSe2-CuSe||AC/KOH BHSC expanded the voltage to 1.8 V and delivered the highest capacitance of 148 F g-1 and 55 F g-1 from 1 to 10 A g-1, suppressing most of the previously existing literature reports. Also, our built NiSe2-CuSe||AC/KOH BHSC displayed a high-power delivery of 8928 W kg-1 at a maximum energy density of 66.6 W h kg-1 and retained 91.7% capacitance after a long way of 10,000 cycles. These outstanding results demonstrate that metal selenides can be effectively utilized as alternative electrodes with high energy, rate performance, and long-term durability for advanced energy conversion and storage devices.

Injectable tissue prosthesis for instantaneous closed-loop rehabilitation

To construct tissue-like prosthetic materials, soft electroactive hydrogels are the best candidate owing to their physiological mechanical modulus, low electrical resistance and bidirectional stimulating and recording capability of electrophysiological signals from biological tissues1,2. Nevertheless, until now, bioelectronic devices for such prostheses have been patch type, which cannot be applied onto rough, narrow or deep tissue surfaces3-5. Here we present an injectable tissue prosthesis with instantaneous bidirectional electrical conduction in the neuromuscular system. The soft and injectable prosthesis is composed of a biocompatible hydrogel with unique phenylborate-mediated multiple crosslinking, such as irreversible yet freely rearrangeable biphenyl bonds and reversible coordinate bonds with conductive gold nanoparticles formed in situ by cross-coupling. Closed-loop robot-assisted rehabilitation by injecting this prosthetic material is successfully demonstrated in the early stage of severe muscle injury in rats, and accelerated tissue repair is achieved in the later stage.

Cryogel-based neurostimulation electrodes to activate endogenous neural precursor cells

The delivery of electrical pulses to the brain via penetrating electrodes, known as brain stimulation, has been recognized as an effective clinical approach for treating neurological disorders. Resident brain neural precursor cells (NPCs) are electrosensitive cells that respond to electrical stimulation by expanding in number, migrating and differentiating which are important characteristics that support neural repair. Here, we report the design of a conductive cryogel brain stimulation electrode specifically developed for NPC activation. The cryogel electrode has a modulus switching mechanism permitting facile penetration and reducing the mechanical mismatch between brain tissue and the penetrating electrode. The cryogel demonstrated good in vivo biocompatibility and reduced the interfacial impedance to deliver the stimulating electric field with lower voltage under charge-balanced current controlled stimulation. An ex vivo assay reveals that electrical stimulation using the cryogel electrodes results in significant expansion in the size of NPC pool. Hence, the cryogel electrodes have the potential to be used for NPC activation to support endogenous neural repair. STATEMENT OF SIGNIFICANCE: The objective of this study is to develop a cryogel-based stimulation electrode as an alternative to traditional electrode materials to be used in regenerative medicine applications for enhancing neural regeneration in brain. The electrode offers benefits such as adaptive modulus for implantation, high charge storage and injection capacities, and modulus matching with brain tissue, allowing for stable delivery of electric field for long-term neuromodulation. The electrochemical properties of cryogel electrodes were characterized in living tissue with an ex vivo set-up, providing a deeper understanding of stimulation capacity in brain environments. The cryogel electrode is biocompatible and enables low voltage, current-controlled stimulation for effective activation of endogenous neural precursor cells, revealing their potential utility in neural stem cell-mediated brain repair.

Conductive electrospun polymer improves stem cell-derived cardiomyocyte function and maturation

Despite numerous efforts to generate mature human pluripotent stem cell-derived cardiomyocytes (hPSC-CMs), cells often remain immature, electrically isolated, and may not reflect adult biology. Conductive polymers are attractive candidates to facilitate electrical communication between hPSC-CMs, especially at sub-confluent cell densities or diseased cells lacking cell-cell junctions. Here we electrospun conductive polymers to create a conductive fiber mesh and assess if electrical signal propagation is improved in hPSC-CMs seeded on the mesh network. Matrix characterization indicated fiber structure remained stable over weeks in buffer, scaffold stiffness remained near in vivo cardiac stiffness, and electrical conductivity scaled with conductive polymer concentration. Cells remained adherent and viable on the scaffolds for at least 5 days. Transcriptomic profiling of hPSC-CMs cultured on conductive substrates for 3 days showed upregulation of cardiac and muscle-related genes versus non-conductive fibers. Structural proteins were more organized and calcium handling was improved on conductive substrates, even at sub-confluent cell densities; prolonged culture on conductive scaffolds improved membrane depolarization compared to non-conductive substrates. Taken together, these data suggest that blended, conductive scaffolds are stable, supportive of electrical coupling in hPSC-CMs, and promote maturation, which may improve our ability to model cardiac diseases and develop targeted therapies.

Interface design for all-solid-state lithium batteries

The operation of high-energy all-solid-state lithium-metal batteries at low stack pressure is challenging owing to the Li dendrite growth at the Li anodes and the high interfacial resistance at the cathodes1-4. Here we design a Mg16Bi84 interlayer at the Li/Li6PS5Cl interface to suppress the Li dendrite growth, and a F-rich interlayer on LiNi0.8Mn0.1Co0.1O2 (NMC811) cathodes to reduce the interfacial resistance. During Li plating-stripping cycles, Mg migrates from the Mg16Bi84 interlayer to the Li anode converting Mg16Bi84 into a multifunctional LiMgSx-Li3Bi-LiMg structure with the layers functioning as a solid electrolyte interphase, a porous Li3Bi sublayer and a solid binder (welding porous Li3Bi onto the Li anode), respectively. The Li3Bi sublayer with its high ionic/electronic conductivity ratio allows Li to deposit only on the Li anode surface and grow into the porous Li3Bi sublayer, which ameliorates pressure (stress) changes. The NMC811 with the F-rich interlayer converts into F-doped NMC811 cathodes owing to the electrochemical migration of the F anion into the NMC811 at a high potential of 4.3 V stabilizing the cathodes. The anode and cathode interlayer designs enable the NMC811/Li6PS5Cl/Li cell to achieve a capacity of 7.2 mAh cm-2 at 2.55 mA cm-2, and the LiNiO2/Li6PS5Cl/Li cell to achieve a capacity of 11.1 mAh cm-2 with a cell-level energy density of 310 Wh kg-1 at a low stack pressure of 2.5 MPa. The Mg16Bi84 anode interlayer and F-rich cathode interlayer provide a general solution for all-solid-state lithium-metal batteries to achieve high energy and fast charging capability at low stack pressure.

Advancements in tailoring PEDOT: PSS properties for bioelectronic applications: A comprehensive review

In the field of bioelectronics, the demand for biocompatible, stable, and electroactive materials for functional biological interfaces, sensors, and stimulators, is drastically increasing. Conductive polymers (CPs) are synthetic materials, which are gaining increasing interest mainly due to their outstanding electrical, chemical, mechanical, and optical properties. Since its discovery in the late 1980s, the CP Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonic acid) (PEDOT:PSS) has become extremely attractive, being considered as one of the most capable organic electrode materials for several bioelectronic applications in the field of tissue engineering and regenerative medicine. Main examples refer to thin, flexible films, electrodes, hydrogels, scaffolds, and biosensors. Within this context, the authors contend that PEDOT:PSS properties should be customized to encompass: i) biocompatibility, ii) conductivity, iii) stability in wet environment, iv) adhesion to the substrate, and, when necessary, v) (bio-)degradability. However, consolidating all these properties into a single functional solution is not always straightforward. Therefore, the objective of this review paper is to present various methods for acquiring and improving PEDOT:PSS properties, with the primary focus on ensuring its biocompatibility, and simultaneously addressing the other functional features. The last section highlights a collection of designated studies, with a particular emphasis on PEDOT:PSS/carbon filler composites due to their exceptional characteristics.

Environment-Interactive Programmable Deformation of Electronically Innervated Synergistic Fluorescence-Color/Shape Changeable Hydrogel Actuators

Utilization of life-like hydrogels to replicate synergistic shape/color changeable behaviors of living organisms has been long envisaged to produce robust functional integrated soft actuators/robots. However, it remains challenging to construct such hydrogel systems with integrated functionality of remote, localized and environment-interactive control over synergistic discoloration/actuation. Herein, inspired by the evolution-optimized bioelectricity stimulus and multilayer structure of natural reptile skins, electronically innervated fluorescence-color switchable hydrogel actuating systems with bio-inspired multilayer structure comprising of responsive fluorescent hydrogel sheet and conductive Graphene/PDMS film with electrothermal effect is presented. Such rational structure enables remote control over synergistic fluorescence-color and shape changes of the systems via the cascading "electrical trigger-Joule heat generation-hydrogel shrinkage" mechanism. Consequently, local/sequential control of discoloration/actuation are achieved due to the highly controllable electrical stimulus in terms of amplitude and circuit design. Furthermore, by joint use with acoustic sensors, soft chameleon robots with unprecedented environment-interactive adaptation are demonstrated, which can intelligently sense environment signals to adjust their color/shape-changeable behaviors. This work opens previously unidentified avenues for functional integrated soft actuators/robots and will inspire life-like intelligent systems for versatile uses.

Synergetic Monitoring of both Physiological Pressure and Epidermal Biopotential Based on a Simplified on-Skin-Printed Sensor Modality

Flexible electronic sensors show great potential for health monitoring but are usually limited to single sensing functionality. To enrich their functions, complicated device configurations, sophisticated material systems, and preparation processes are typically involved, obstructing their large-scale deployment and widespread application. Herein, to achieve a good balance between simplicity and multifunctionality, a new paradigm of sensor modality for both mechanical sensing and bioelectrical sensing is presented based on a single material system and a simple solution processing approach. The whole multifunctional sensors are constructed with a pair of highly conductive ultrathin electrodes (WPU/MXene-1) and an elastic micro-structured mechanical sensing layer (WPU/MXene-2), with the human skin serving as the substrate for the whole sensors. The resultant sensors show high pressure sensitivity and low skin-electrode interfacial impedance, enabling to synergetically monitor both physiological pressure (e.g., arterial pulse signals) and epidermal bioelectrical signals (including electrocardiograph and electromyography). The universality and extensibility of this methodology to construct multifunctional sensors with different material systems are also verified. This simplified sensor modality with enhanced multifunctionality provides a novel design concept to construct future smart wearables for health monitoring and medical diagnosis.

A New Strong-Acid Free Route to Produce Xanthan Gum-PANI Composite Scaffold Supporting Bioelectricity

Conductive hybrid xanthan gum (XG)-polyaniline (PANI) biocomposites forming 3D structures able to mimic electrical biological functions are synthesized by a strong-acid free medium. In situ aniline oxidative chemical polymerizations are performed in XG water dispersions to produce stable XG-PANI pseudoplastic fluids. XG-PANI composites with 3D architectures are obtained by subsequent freeze-drying processes. The morphological investigation highlights the formation of porous structures; UV-vis and Raman spectroscopy characterizations assess the chemical structure of the produced composites. I-V measurements evidence electrical conductivity of the samples, while electrochemical analyses point out their capability to respond to electric stimuli with electron and ion exchanges in physiological-like environment. Trial tests on prostate cancer cells evaluate biocompatibility of the XG-PANI composite. Obtained results demonstrate that a strong acid-free route produces an electrically conductive and electrochemically active XG-PANI polymer composite. The investigation of charge transport and transfer, as well as of biocompatibility properties of composite materials produced in aqueous environments, brings new perspective for exploitation of such materials in biomedical applications. In particular, the developed strategy can be used to realize biomaterials working as scaffolds that require electrical stimulations for inducing cell growth and communication or for biosignals monitoring and analysis.

Heterogeneous electro-Fenton treatment of chemotherapeutic drug busulfan using magnetic nanocomposites as catalyst

The rapid and efficient mineralization of the chemotherapeutic drug busulfan (BSF) as the target pollutant has been investigated for the first time by three different heterogeneous EF systems that were constructed to ensure the continuous electro-generation of H2O2 and •OH consisting of: i) a multifunctional carbon felt (CF) based cathode composed of reduced graphene oxide (rGO), iron oxide nanoparticles and carbon black (CB) (rGO-Fe3O4/CB@CF), ii) rGO modified cathode (rGO/CB@CF) and rGO supported Fe3O4 (rGO-Fe3O4) catalyst and iii) rGO modified cathode (rGO/CB@CF) and multi walled carbon nanotube supported Fe3O4 (MWCNT-Fe3O4) catalyst. The effects of main variables, including the catalyst amount, applied current and initial pH were investigated. Based on the results, H2O2 was produced by oxygen reduction reaction (ORR) on the liquid-solid interface of both fabricated cathodes. •OH was generated by the reaction of H2O2 with the active site of ≡FeII on the surface of the multifunctional cathode and heterogeneous EF catalysts. Utilizing carbon materials with high conductivity, the redox cycling between ≡FeII and ≡FeIII was effectively facilitated and therefore promoted the performance of the process. The results demonstrated almost complete mineralization of BSF through the heterogeneous systems over a wide applicable pH range. According to the reusability and stability tests, multifunctional cathode exhibited outstanding performance after five consecutive cycles which is promising for the efficient mineralization of refractory organic pollutants. Moreover, intermediates products of BSF oxidation were identified and a plausible oxidation pathway was proposed. Therefore, this study demonstrates efficient and stable cathodes and catalysts for the efficient treatment of an anticancer active substance.

Flexible Strain-Sensitive Sensors Assembled from Mussel-inspired Hydrogel with Tunable Mechanical Properties and Wide Temperature Tolerance in Multiple Application Scenarios

Conductive hydrogels, exhibiting wide applications in electronic skins and soft wearable sensors, often require maturely regulating of the hydrogel mechanical properties to meet specific demands and work for a long-term or under extreme environment. However, in situ regulation of the mechanical properties of hydrogels is still a challenge, and regular conductive hydrogels will inevitably freeze at subzero temperature and easily dehydrate, which leads to a short service life. Herein, a novel adhesive hydrogel (PAA-Dopa-Zr4+) capable of strain sensing is proposed with antifreezing, nondrying, strong surface adhesion, and tunable mechanical properties. 3,4-Dihydroxyphenyl-l-alanine (l-Dopa)-grafted poly(acrylic acid) (PAA) and Zr4+ ion are introduced into the hydrogel, which broadly alters the mechanical properties via tuning the in situ aggregation state of polymer chains by ions based on the complexation effect. The catechol groups of l-Dopa and viscous glucose endow the hydrogel with high adhesiveness for skin and device interface (including humid and dry environments) and exhibit an outstanding temperature tolerance under extreme wide temperature spectrum (-35 to 65 °C) or long-lasting moisture retention (60 days). Furthermore, this PAA-Dopa-Zr4+ can be assembled as a flexible strain-sensitive sensor to detect human motions based on specific mechanical properties requirements. This work, enabling superior adhesive and temperature tolerance performance and broad mechanical tenability, presents a new paradigm for numerous applications to wearable sensing and personalized healthcare monitoring.

Impedance-Based Multimodal Electrical-Mechanical Intrinsic Flow Cytometry

Reflecting various physiological states and phenotypes of single cells, intrinsic biophysical characteristics (e.g., mechanical and electrical properties) are reliable and important, label-free biomarkers for characterizing single cells. However, single-modal mechanical or electrical properties alone are not specific enough to characterize single cells accurately, and it has been long and challenging to couple the conventionally image-based mechanical characterization and impedance-based electrical characterization. In this work, the spatial-temporal characteristics of impedance sensing signal are leveraged, and an impedance-based multimodal electrical-mechanical flow cytometry framework for on-the-fly high-dimensional intrinsic measurement is proposed, that is, Young's modulus E, fluidity β, radius r, cytoplasm conductivity σi , and specific membrane capacitance Csm , of single cells. With multimodal high-dimensional characterization, the electrical-mechanical flow cytometry can better reveal the difference in cell types, demonstrated by the experimental results with three types of cancer cells (HepG2, MCF-7, and MDA-MB-468) with 93.4% classification accuracy and pharmacological perturbations of the cytoskeleton (fixed and Cytochalasin B treated cells) with 95.1% classification accuracy. It is envisioned that multimodal electrical-mechanical flow cytometry provides a new perspective for accurate label-free single-cell intrinsic characterization.

Injection-on-Skin Granular Adhesive for Interactive Human-Machine Interface

Realization of interactive human-machine interfaces (iHMI) is improved with development of soft tissue-like strain sensors beyond hard robotic exosuits, potentially allowing cognitive behavior therapy and physical rehabilitation for patients with brain disorders. Here, this study reports on a strain-sensitive granular adhesive inspired by the core-shell architectures of natural basil seeds for iHMI as well as human-metaverse interfacing. The granular adhesive sensor consists of easily fragmented hydropellets as a core and tissue-adhesive catecholamine layers as a shell, satisfying great on-skin injectability, ionic-electrical conductivity, and sensitive resistance changes through reversible yet robust cohesion among the hydropellets. Particularly, it is found that the ionic-electrical self-doping of the catecholamine shell on hydrosurfaces leads to a compact ion density of the materials. Based on these physical and electrical properties of the sensor, it is demonstrated that successful iHMI integration with a robot arm in both real and virtual environments enables robotic control by finger gesture and haptic feedback. This study expresses benefits of using granular hydrogel-based strain sensors for implementing on-skin writable bioelectronics and their bridging into the metaverse world.

Skin-Inspired Patterned Hydrogel with Strain-Stiffening Capability for Strain Sensors

Flexible materials with ionic conductivity and stretchability are indispensable in emerging fields of flexible electronic devices as sensing and protecting layers. However, designing robust sensing materials with skin-like compliance remains challenging because of the contradiction between softness and strength. Herein, inspired by the modulus-contrast hierarchical structure of biological skin, we fabricated a biomimetic hydrogel with strain-stiffening capability by embedding the stiff array of poly(acrylic acid) (PAAc) in the soft polyacrylamide (PAAm) hydrogel. The stress distribution in both stiff and soft domains can be regulated by changing the arrangement of patterns, thus improving the mechanical properties of the patterned hydrogel. As expected, the resulting patterned hydrogel showed its nonlinear mechanical properties, which afforded a high strength of 1.20 MPa while maintaining a low initial Young's modulus of 31.0 kPa. Moreover, the array of PAAc enables the patterned hydrogel to possess protonic conductivity in the absence of additional ionic salts, thus endowing the patterned hydrogel with the ability to serve as a strain sensor for monitoring human motion.

Facile Preparation of a Self-Adhesive Conductive Hydrogel with Long-Term Usability

Although conductive hydrogels (CHs) have been investigated as the wearable sensor in recent years, how to prepare the multifunctional CHs with long-term usability is still a big challenge. In this paper, we successfully prepared a kind of conductive and self-adhesive hydrogel with a simple method, and its excellent ductility makes it possible as a flexible strain sensor for intelligent monitoring. The CHs are constructed by poly(vinyl alcohol) (PVA), polydopamine (PDA), and phytic acid (PA) through the freeze-thaw cycle method. The introduction of PA enhanced the intermolecular force with PVA and provided much H+ for augmented conductivity, while the catechol group on PDA endows the hydrogel with self-adhesion ability. The PVA/PA/PDA hydrogel can directly contact with the skin and adhere to it stably, which makes the hydrogel potentially a wearable strain sensor. The PVA/PA/PDA hydrogel can monitor human motion signals (including fingers, elbows, knees, etc.) in real-time and can accurately monitor tiny electrical signals for smile and handwriting recognition. Notably, the composite CHs can be used in a normal environment even after 4 months. Because of its excellent ductility, self-adhesiveness, and conductivity, the PVA/PA/PDA hydrogel provides a new idea for wearable bioelectronic sensors.

Multifunctional acetylated distarch phosphate based conducting hydrogel with high stretchability, ultralow hysteresis and fast response for wearable strain sensors

The rapid development of flexible sensors has greatly increased the demand for high-performance hydrogels. However, it remains a challenge to fabricate flexible hydrogel sensors with high stretching, low hysteresis, excellent adhesion, good conductivity, sensing characteristics and bacteriostatic function in a simple way. Herein, a highly conducting double network hydrogel is presented by incorporating lithium chloride (LiCl) into the hydrogel consisting of poly (2-acrylamide-2-methylpropanesulfonic acid/acrylamide/acrylic acid) (3A) network and acetylated distarch phosphate (ADSP). The addition of ADSP not only formed hydrogen bonds with 3A to improve the toughness of the hydrogel but also plays the role of "physical cross-linking" in 3A by "anchoring" the polymer molecular chains together. Tuning the composition of the hydrogel allows the attainment of the best functions, such as high stretchability (∼770 %), ultralow hysteresis (2.2 %, ε = 100 %), excellent electrical conductivity (2.9 S/m), strain sensitivity (GF = 3.0 at 200-500 % strain) and fast response (96 ms). Based on the above performance, the 3A/ADSP/LiCl hydrogel strain sensor can repeatedly and stably detect and monitor large-scale human movements and subtle sensing signals. In addition, the 3A/ADSP/LiCl hydrogel shows a good biocompatibility and bacteriostatic ability. This work provides an effective strategy for constructing the conductive hydrogels for wearable devices and flexible sensors.