Physical and antimicrobial properties of chitosan–tea tree essential oil composite films

Comparative Study of Crucial Properties of Packaging Based on Polylactide and Selected Essential Oils

In order to establish the differences in packaging containing various essential oils, polylactide (PLA)-based polymeric films incorporating poly(ethylene glycol) (PEG), clove (C), grapefruit (G), rosemary (R), and tea tree (T) essential oils were obtained and subsequently analyzed. In addition to examining structure and morphology, the polymer films underwent analyses that are particularly important with regard to contact with food. Mechanical and antioxidant properties, water vapor transmission rate (WVTR), and analysis of barrier properties against ultraviolet (UV) radiation, as well as the migration of ingredients into food simulants such as 10% v/v solutions of ethanol, 3% w/v acetic acid solution, and isooctane, were among the critical studies conducted. A comparison of the properties of the obtained materials allowed us to establish that the incorporation of essential oils significantly increases elongation at break and enhances UV barrier properties. In the case of materials containing clove oil and tea tree oil, a reduction in WVTR of about 1 g/m2/h was observed. The migration of the ingredients present in the films filled with clove oil, grapefruit oil, and tea tree oil into the acetic acid solution did not exceed 10 mg/kg, which is an acceptable value according to the European Union restrictions. Taking into account all of the studied properties, it should be stressed that the most promising packaging material is the film filled with clove oil.

Enhanced physicochemical properties of chitosan films with in situ generation of kafirin particles: optimization via response surface methodology

Biodegradable food packaging has gained significant attention owing to environmental concerns. Chitosan (CS), a natural polysaccharide, is popular in packaging films, however, its high hydrophilicity, brittleness, and low mechanical strength limit its use. To improve CS film performance, kafirin (Kaf), glycerol (GE), and tannic acid (TA) were added to create biocomposite films. The response surface method (RSM) was used to develop predictive models, with Kaf, GE, and TA as independent variables. Optimal film properties were achieved with a CS to Kaf ratio of 9 : 1, 20% GE as a plasticizer, and 5% TA. The addition of Kaf and TA increased the tensile strength and improved hygroscopicity, solubility loss, swelling, and water contact angle. GE enhanced the film flexibility. Overall, the composite films showed improved mechanical strength, water resistance, and UV resistance, indicating strong potential for food packaging applications.

Investigating the physicochemical, antimicrobial and antioxidant properties of chitosan film containing zero-valent iron nanoparticles and oregano essence

The problems caused by the pollution of the environment by petroleum polymers in recent years have caused researchers to think of replacing petroleum polymers with biodegradable and natural polymers. The aim of this research was to produce composite film of chitosan (Chit)/zero-valent iron (Fe) nanoparticles/oregano essence (Ess) (Chit/Fe/Ess). Central composite design was used to study physical, morphological, antioxidant and antimicrobial properties of films. The results showed that with the increase of iron nanoparticles and oregano essence, the thickness of the film increased. The moisture, solubility and water vapor permeability of the film decreased with the increase of iron nanoparticles and oregano essence. The results of the mechanical test showed that with the increase of iron nanoparticles and oregano essence, the tensile strength and elongation at break point decreased. Iron nanoparticles and oregano essence increased significantly the antioxidant activity of the film. The results of the antimicrobial activity of the prepared films show that the addition of iron nanoparticles and oregano essence enhanced the antimicrobial activity of the film against Escherichia coli and Staphylococcus aureus. X-ray diffraction analysis showed that iron nanoparticles were physically combined with chitosan polymer. Fourier transform infrared (FTIR) results confirmed the physical presence of iron nanoparticles and oregano essence in the polymer matrix. The results of scanning electron microscopy (SEM) showed that the surface of nanocomposite films is more heterogeneous than chitosan. Iron nanoparticles and oregano essence could delay the thermal decomposition of chitosan and increase the thermal stability of chitosan film.

Physicochemical characterization of antioxidant film based on ternary blend of chitosan and Tulsi-Ajwain essential oil for preserving walnut

This study focuses on changes in the physiochemical properties of chitosan film when incorporated with a blend of essential oils of Tulsi and Ajwain. The essential oil blend-loaded films showed a decrement in transparency. Tulsi essential oil decreased the moisture content, swelling capacity, and water solubility. However, adding Ajwain along with Tulsi essential oil led to a significant increase in these properties. Meanwhile, the water vapor transmission rate didn't change significantly due to non-polar constituents in Tulsi essential oil, except when only Ajwain essential oil was present. The mechanical properties showed that the tensile strength of films increased with the addition of Tulsi essential oil (14.95 MPa to 31.27 MPa) but decreased further with increasing Ajwain oil concentration in films (32.13 MPa to 15.89 MPa). On the other hand, an increment in percent elongation at break (8.26 % to 24.02 %) was observed due to the excellent plasticization effect of Ajwain essential oil. Antioxidant activity was observed for the Tulsi essential oil-containing films and increased significantly with adding Ajwain essential oil. Finally, walnuts were packed in the active film. The active film showed better antioxidant activity against the oxidation of oil in walnuts, which the FTIR of the packed product confirmed.

A review of advancements in chitosan-essential oil composite films: Better and sustainable food preservation with biodegradable packaging

In response to the environmental pollution caused by non-degradable and non-recyclable plastic packaging films (PPFs) and the resulting health concerns due to the migration of microplastics into food, the development of biodegradable food packaging films has gained great attention. Chitosan has been extensively utilized in the food industry owing to its abundant availability, exceptional biocompatibility, degradability, and antimicrobial properties. Chitosan-essential oil composite films (CEOs) represent a promising avenue to replace conventional PPFs. This review provides an overview of the advancements in CEOs over the past decade, focusing on the effects of essential oils (EOs) on CEOs in terms of antimicrobial activity, antioxidant effect, gas barrier, light barrier, and mechanical properties. It also offers insights into the controlled release of EOs in CEOs and summarizes the application of CEOs in fresh food preservation.

Biofilm containing the Thymus serpyllum essential oil for rice and cherry tomato conservation

Introduction

Fungal pathogens cause major yield losses in agriculture and reduce food quality and production worldwide.

Purpose

To evaluate new safer alternatives to chemicals for disease management and preserve the shelf life of food, this research was conducted to: determine the chemical composition of the essential oils (EOs) of Thymus serpyllum and Thymus piperella chemotypes 1 and 2; investigate the antifungal potential of EOs in vitro against: Alternaria alternata, Bipolaris spicifera, Curvularia hawaiiensis, Fusarium oxysporum f. sp. lycopersici, Penicillium italicum, Botryotinia fuckeliana; evaluate a natural T. serpyllum extract biofilm to conserve rice grain and cherry tomatoes.

Method

EOs were analyzed by GC-MS+GC-FID. EOs' antifungal activity was evaluated by dissolving Thymus extracts in PDA. Petri dishes were inoculated with disks of each fungus and incubated at 25°C for 7 days.

Results

The T. serpyllum EO displayed the best Mycelial Growth Inhibition. The antifungal effect of the T. serpyllum EO biofilm was evaluated on rice caryopsis. Disinfected grains were dipped in a conidial suspension of each fungus and sprayed with EO (300 and 600 μg/mL) prepared in Tween 20. Grains were stored. The percentage of infected grains was recorded for 30 days. The T. serpyllum EO effect on cherry tomato conservation was evaluated in vivo. Wounded fruit were immersed in the T. serpyllum EO (300 and 400 μg/mL) and inoculated with Fusarium oxysporum f. sp. lycopersici. Fruit were evaluated for 7 and 14 days. Chemical profiles thymol/carvacrol for T. serpyllum, carvacrol for T. piperella Tp1 and thymol for T. piperella Tp2 were defined. The three evaluated EOs reduced all the studied phytopathogens' fungal growth. The T. serpyllum biofilm was effective with rice storage and against Fusarium oxysporum f. sp. lycopersici for extending the shelf life of tomatoes in warehouses and storing postharvest cherry tomatoes.

Conclusion

We suggest applying these EOs as biofilms for safe food conservation to replace synthetic products.

Thermoplastic Starch Biocomposite Films Reinforced with Nanocellulose from Agave tequilana Weber var. Azul Bagasse

In this work, cellulose nanocrystals (CNCs), bleached cellulose nanofibers (bCNFs), and unbleached cellulose nanofibers (ubCNFs) isolated by acid hydrolysis from Agave tequilana Weber var. Azul bagasse, an agro-waste from the tequila industry, were used as reinforcements in a thermoplastic starch matrix to obtain environmentally friendly materials that can substitute contaminant polymers. A robust characterization of starting materials and biocomposites was carried out. Biocomposite mechanical, thermal, and antibacterial properties were evaluated, as well as color, crystallinity, morphology, rugosity, lateral texture, electrical conductivity, chemical identity, solubility, and water vapor permeability. Pulp fibers and nanocelluloses were analyzed via SEM, TEM, and AFM. The water vapor permeability (WVP) decreased by up to 20.69% with the presence of CNCs. The solubility decreases with the presence of CNFs and CNCs. The addition of CNCs and CNFs increased the tensile strength and Young's modulus and decreased the elongation at break. Biocomposites prepared with ubCNF showed the best tensile mechanical properties due to a better adhesion with the matrix. Images of bCNF-based biocomposites demonstrated that bCNFs are good reinforcing agents as the fibers were dispersed within the starch film and embedded within the matrix. Roughness increased with CNF content and decreased with CNC content. Films with CNCs did not show bacterial growth for Staphylococcus aureus and Escherichia coli. This study offers a new theoretical basis since it demonstrates that different proportions of bleached or unbleached nanofibers and nanocrystals can improve the properties of starch films.

κ-Carrageenan-essential oil loaded composite biomaterial film facilitates mechanosensing and tissue regenerative wound healing

Polysaccharides κ-carrageenan (κ-Car) have become a predominant source in developing bioactive materials. We aimed to develop biopolymer composite materials of κ-Car with coriander essential oil (CEO) (κ-Car-CEO) films for fibroblast-associated wound healing. Initially, we loaded the CEO in to κ-Car and CEO through homogenization and ultrasonication to fabricate composite film bioactive materials. After performing morphological and chemical characterizations, we validated the developed material functionalities in both in vitro and in vivo models. The chemical and morphological analysis with physical structure, swelling ratio, encapsulation efficiency, CEO release, and water barrier properties of films examined and showed the structural interaction of κ-Car and CEO-loaded into the polymer network. Furthermore, the bioactive applications of CEO release showed initial burst release followed by controlled release from the κ-Car composite film with fibroblast (L929) cell adhesive capabilities and mechanosensing. Our results proved that the CEO-loaded into the κ-Car film impacts cell adhesion, F-actin organization, and collagen synthesis, followed by in vitro mechanosensing activation, further promoting wound healing in vivo. Our innovative perspectives of active polysaccharide (κ-Car)-based CEO functional film materials could potentially accomplish regenerative medicine.

Physico-chemical and antimicrobial characteristics of novel biodegradable films based on gellan and carboxymethyl cellulose containing rosemary essential oil

The purpose of the current investigation was to produce a novel functional composite biodegradable film by Gellan (Gla) and Carboxymethyl cellulose (CMC) biopolymers containing rosemary essential oils (REO) and evaluate their physicochemical and antimicrobial features. The film containing 5 % REO, due to its better mechanical properties (UTS = 13.44 ± 0.30 Mpa and SB = 21.14 ± 1.15 %) compared to other emulsified samples containing REO, was selected as the optimal film. Furthermore, it had less water vapor permeability (WVP = 6.60 ± 0.31 (g/mhPa) × 10^-8) in comparison to control sample (8.21 ± 0.10 (g/mhPa) × 10^-8) and the best color properties among the samples. The Scanning Electron Microscopy (SEM) images didn't show the phenomenon of agglomeration and point accumulation of REO. Also, 5 % of REO contributed to the increased compactness of the film in comparison to the film without the REO. Based on the results of Fourier-transform infrared spectroscopy (FTIR) spectra, no new chemical bonds were created by adding REO to the biopolymer substrate, and the REO was well dispersed and distributed among the Gla-CMC chains throughout the film substrate. Adding 5 % REO showed antioxidant effects. Considering the antimicrobial tests, all films containing REO had antimicrobial effects against the Staphylococcus aureus, Escherichia coli, Salmonella typhimurium, and Pseudomonas fluorescens bacterial strains.

Elaboration and general evaluation of chitosan-based films containing terpene alcohols-rich essential oils

Recently, the scientific community is interested in the synthesis of biodegradable and bioactive packaging to replace oil-based ones. Therefore, the present study aims to elaborate an active and biodegradable material using chitosan (CS-film) combined with pelargonium, tea tree, marjoram, and thyme essential oils (EOs), and then evaluate their different properties and biological activities. The obtained data showed an augmentation in CS-film thickness and opacity following the addition of EOs ranging from 17 ± 3 to 42 ± 2 μm and from 1.53 ± 0.04 to 2.67 ± 0.09, respectively. Furthermore, a significant decrease in the water vapor transmission rate and moisture content parameters was recorded as regards the treated CS-films. On the other hand, the treatment with EOs engenders random modifications in the physicochemical and mechanical characteristics of the material. Concerning the biological activities, the treated CS-films scavenged around 60% of DPPH radical while the control CS-film exhibited a negligible antioxidant activity. Finally, the CS-films containing pelargonium and thyme EOs exhibited the strongest antibiofilm-forming activity against Escherichia coli, Enterococcus hirae, Staphylococcus aureus, and Pseudomonas aeruginosa with values of inhibition greater than 70%. These encouraging results verify the effectiveness of CS-films containing EOs such as pelargonium and thyme EOs as biodegradable and bioactive packaging.

Enhancing the Antioxidant, Antibacterial, and Wound Healing Effects of Melaleuca alternifolia Oil by Microencapsulating It in Chitosan-Sodium Alginate Microspheres

In this study, antibacterial and antioxidant molecules-rich Melaleuca alternifolia oil (tea tree oil (TTO)) loaded chitosan (CS) based nanoemulsions (NEMs) were prepared and encapsulated by sodium alginate (SA) microsphere for antibacterial wound dressing. CS-TTO NEMs were prepared by oil-in-water emulsion technique, and the nanoparticle tracking analysis (NTA) confirmed that the CS-TTO NEMs had an average particle size of 89.5 nm. Further, the SA-CS-TTO microsphere was confirmed through SEM analysis with an average particle size of 0.76 ± 0.10 µm. The existence of TTO in CS NEMs and SA encapsulation was evidenced through FTIR analysis. The XRD spectrum proved the load of TTO and SA encapsulation with CS significantly decreased the crystalline properties of the CS-TTO and SA-CS-TTO microsphere. The stability of TTO was increased by the copolymer complex, as confirmed through thermal gravimetric analysis (TGA). Furthermore, TTO was released from the CS-SA complex in a sustained manner and significantly inhibited the bacterial pathogens observed under confocal laser scanning microscopy (CLSM). In addition, CS-TTO (100 µg/mL) showed antioxidant potential (>80%), thereby increasing the DPPH and ABTS free radicals scavenging ability of SA-CS-TTO microspheres. Moreover, CS and SA-CS-TTO microsphere exhibited negligible cytotoxicity and augmented the NIH3T3 cell proliferation confirmed in the in vitro scratch assay. This study concluded that the SA-CS-TTO microsphere could be an antibacterial and antioxidant wound dressing.

Recent Advances in Chitosan-Based Applications-A Review

Chitosan derived from chitin gas gathered much interest as a biopolymer due to its known and possible broad applications. Chitin is a nitrogen-enriched polymer abundantly present in the exoskeletons of arthropods, cell walls of fungi, green algae, and microorganisms, radulae and beaks of molluscs and cephalopods, etc. Chitosan is a promising candidate for a wide variety of applications due to its macromolecular structure and its unique biological and physiological properties, including solubility, biocompatibility, biodegradability, and reactivity. Chitosan and its derivatives have been known to be applicable in medicine, pharmaceuticals, food, cosmetics, agriculture, the textile and paper industries, the energy industry, and industrial sustainability. More specifically, their use in drug delivery, dentistry, ophthalmology, wound dressing, cell encapsulation, bioimaging, tissue engineering, food packaging, gelling and coating, food additives and preservatives, active biopolymeric nanofilms, nutraceuticals, skin and hair care, preventing abiotic stress in flora, increasing water availability in plants, controlled release fertilizers, dye-sensitised solar cells, wastewater and sludge treatment, and metal extraction. The merits and demerits associated with the use of chitosan derivatives in the above applications are elucidated, and finally, the key challenges and future perspectives are discussed in detail.

Polycaprolactone (PCL)-Polylactic Acid (PLA)-Glycerol (Gly) Composites Incorporated with Zinc Oxide Nanoparticles (ZnO-NPs) and Tea Tree Essential Oil (TTEO) for Tissue Engineering Applications

The search for new biocompatible materials that can replace invasive materials in biomedical applications has increased due to the great demand derived from accidents and diseases such as cancer in various tissues. In this sense, four formulations based on polycaprolactone (PCL) and polylactic acid (PLA) incorporated with zinc oxide nanoparticles (ZnO-NPs) and tea tree essential oil (TTEO) were prepared. The sol-gel method was used for zinc oxide nanoparticle synthesis with an average size of 11 ± 2 nm and spherical morphology. On the other hand, Fourier Transformed infrared spectroscopy (FTIR) showed characteristic functional groups for each composite component. The TTEO incorporation in the formulations was related to the increased intensity of the C-O-C band. The thermal properties of the materials show that the degradative properties of the ZnO-NPs decrease the thermal stability. The morphological study by scanning electron microscopy (SEM) showed that the presence of TTEO and ZnO-NPs act synergistically, obtaining smooth surfaces, whereas membranes with the presence of ZnO-NPs or TTEO only show porous morphologies. Histological implantation of the membranes showed biocompatibility and biodegradability after 60 days of implantation. This degradation occurs through the fragmentation of the larger particles with the presence of connective tissue constituted by type III collagen fibers, blood vessels, and inflammatory cells, where the process of resorption of the implanted material continues.

Biobased polymer resources and essential oils: a green combination for antibacterial applications

To fight nosocomial infections, the excessive use of antibiotics has led to the emergence of multidrug-resistant microorganisms, which are now considered a relevant public health threat by the World Health Organization. To date, most antibacterial systems are based on the use of petro-sourced polymers, but the global supplies of these resources are depleting. Besides, silver NPs are widely accepted as the most active biocide against a wide range of bacterial strains but their toxicity is an issue. The growing interest in natural products has gained increasing interest in the last decade. Therefore, the design of functional antibacterial materials derived from biomass remains a significant challenge for the scientific community. Consequently, attention has shifted to naturally occurring substances such as essential oils (EOs), which are classified as Generally Recognized as Safe (GRAS). EOs can offer an alternative to the common antimicrobial agents as an inner solution or biocide agent to inhibit the resistance mechanism. Herein, this review not only aims at providing developments in the antibacterial modes of action of EOs against various bacterial strains and the recent advances in genomic and proteomic techniques for the elucidation of these mechanisms but also presents examples of biobased polymer resource-based EO materials and their antibacterial activities. Especially, we describe the antibacterial properties of biobased polymers, e.g. cellulose, starch, chitosan, PLA PHAs and proteins, associated with EOs (cinnamon (CEO), clove (CLEO), bergamot (BEO), ginger (GEO), lemongrass (LEO), caraway (CAEO), rosemary (REO), Eucalyptus globulus (EGEO), tea tree (TTEO), orange peel (OPEO) and apricot (Prunus armeniaca) kernel (AKEO) essential oils). Finally, we discuss the influence of EOs on the mechanical strength of bio-based materials.

Development and characterization of sodium alginate/tea tree essential oil nanoemulsion active film containing TiO2 nanoparticles for banana packaging

To improve the postharvest quality and reduce the anthracnose of bananas, the sodium alginate (SA)/tea tree essential oil nanoemulsion (TEON) based bilayer films incorporated with different contents of TiO₂ nanoparticles were fabricated in this work. The developed TEON presented satisfactory DPPH scavenging activity (65.5 ± 1.8%) and antifungal capability (90.5 ± 5.8%). The microscopy images of the cross-section of the films indicated that the bilayer films with well-cross-linked were developed successfully. Notably, the addition of a certain content of TiO₂ to SA greatly improved the UV blocking and water vapor and oxygen barrier properties of the developed film. However, the barrier property of the film was decreased when the TiO₂ content further increased to 4.0 mg/100 mg of SA. The retention of TEO under visible and UV light in the bilayer film was respectively prolonged to 24 days and 32 h when the addition of TiO₂ content was 2.0 mg/100 mg of SA. Finally, the postharvest quality and anthracnose of banana fruits were significantly improved by SA-TiO₂ + SA-TEON film-forming solution treatments. Results from the present work might open up new insights into the approaches of postharvest quality improvement of bananas.

Edible coating as postharvest management strategy for shelf-life extension of fresh tomato (Solanum lycopersicum L.): An overview

Tomato is considered as one of the most grown horticultural crops having a short shelf-life due to its climacteric nature of ripening, susceptibility to postharvest microbial decay, and mechanical damage, resulting in huge postharvest losses. Recently, the use of edible coatings has been seen as a promising environment friendly and sustainable technology for preserving the quality attributes and prolonging the shelf-life of tomato during storage. Although a lot of literature is available on the aspects of edible coating for fresh produce, especially stone and tropical fruits, but there is no dedicated comprehensive review that specifically addresses the requirements of edible coatings for whole fresh tomato. This review aims to provide the information about the desirable coating property requirements specific to tomato and summarizes or analyzes the recent studies conducted on the application of edible coating on tomato. The article also deals with recent trends on utilization of bioactive compounds as well as nanotechnological approaches for improving the performance and functionality of coating materials used for tomato. However, the edible coating technology for tomato is still at infancy state, and adoption of technology on a commercial scale requires economic viability and large-scale consumer acceptability.

Preparation and Characterization of Bioactive Chitosan Film Loaded with Cashew (Anacardium occidentale) Leaf Extract

Chitosan is a biopolymer known for its rapid biodegradability and film-forming properties. This research aimed to synthesize and characterize chitosan films loaded with cashew leaf extract (CLE) obtained from immature and mature cashew leaves via aqueous and 70% ethanolic extraction methods. Freeze-dried CLE samples were dissolved in 50% dimethyl sulfoxide for in vitro analysis and chitosan film preparation. The total phenolic content of mature cashew leaves extracted in ethanol (MECLE) showed higher free radicle scavenging activity by a 2,2-diphenyl-1-picrylhydrazyl assay than the other extracts (p < 0.05). MECLE displayed a lower minimal inhibitory concentration, minimum fungal concentration, and higher zone of inhibition against Aspergillus niger compared to the other treatments (p < 0.05). Film-forming solutions were prepared using 2% chitosan, 2% chitosan with 5% mature cashew leaves extracted in deionized water (MACLE) (w/v), and 2% chitosan with 5% MECLE (w/v), respectively, to cast films. Of these, 2% chitosan (CH) with 5% MECLE (CH-MECLE-5) displayed the highest thickness and water vapor transmission rate, water vapor permeability, and oxygen transmission rate when compared to other film samples (p < 0.05). The CH-MECLE-5 film showed the highest inhibition zone of A. niger compared to the control and treated films (p < 0.05). The lightness (L*) of the CH-MECLE-5 film decreased with increment in b* values, which represented the yellow color of the film. In addition, two-photon microscopy revealed a uniform distribution via the auto-fluorescent 3D structure of MECLE in the CH-MECLE-5 film. Therefore, chitosan combined with 5% MECLE may be a potential bioactive and eco-friendly packaging film.

Biobased composites from agro-industrial wastes and by-products

The greater awareness of non-renewable natural resources preservation needs has led to the development of more ecological high-performance polymeric materials with new functionalities. In this regard, biobased composites are considered interesting options, especially those obtained from agro-industrial wastes and by-products. These are low-cost raw materials derived from renewable sources, which are mostly biodegradable and would otherwise typically be discarded. In this review, recent and innovative academic studies on composites obtained from biopolymers, natural fillers and active agents, as well as green-synthesized nanoparticles are presented. An in-depth discussion of biobased composites structures, properties, manufacture, and life-cycle assessment (LCA) is provided along with a wide up-to-date overview of the most recent works in the field with appropriate references. Potential uses of biobased composites from agri-food residues such as active and intelligent food packaging, agricultural inputs, tissue engineering, among others are described, considering that the specific characteristics of these materials should match the proposed application.

Polysaccharide-Based Active Coatings Incorporated with Bioactive Compounds for Reducing Postharvest Losses of Fresh Fruits

This review reports recently published research related to the application of polysaccharide-based biodegradable and edible coatings (BECs) fortified with bioactive compounds obtained from plant essential oils (EOs) and phenolic compounds of plant extracts. Combinations of polysaccharides such as starches, pectin, alginate, cellulose derivatives, and chitosan with active compounds obtained from clove, lemon, cinnamon, lavender, oregano, and peppermint have been documented as potential candidates for biologically active coating materials for retardation of quality changes in fresh fruits. Additionally, polysaccharide-based active coatings supplemented with plant extracts such as cashew leaves, pomegranate peel, red roselle, apple fiber, and green tea extracts rich in phenolic compounds and their derivatives have been reported to be excellent substituents to replace chemically formulated wax coatings. Moreover, EOs and plant polyphenolics including alcohols, aldehydes, ketones phenols, organic acids, terpenes, and esters contain hydroxyl functional groups that contribute bioactivity to BECs against oxidation and reduction of microbial load in fresh fruits. Therefore, BECs enriched with active compounds from EOs and plant extracts minimize physiological and microbial deterioration by reducing moisture loss, softening of flesh, ripening, and decay caused by pathogenic bacterial strains, mold, or yeast rots, respectively. As a result, shelf life of fresh fruits can be extended by employing active polysaccharide coatings supplemented with EOs and plant extracts prior to postharvest storage.

Preparation and physicochemical assessment of bioactive films based on chitosan and starchy powder of white turmeric rhizomes (Curcuma Zedoaria) for green packaging applications

In the current study, the bioactive films of chitosan/white turmeric (CH/WT) were prepared by employing solvent casting technique and analyzed their physicochemical and biological properties for active packaging applications. The successful inclusion of white turmeric into the chitosan matrix is confirmed by Fourier Transform Infrared Spectroscopy. Due to the presence of hydrogen bonding interaction, the active films exhibited good tensile properties, smooth surface morphology, miscibility, water resistance and UV barrier properties. The incorporation of white turmeric reduced the water vapour transmission rate and oxygen permeability (p < 0.05) in contrast with pristine film. The prepared blend films revealed soil degradation rate more than 60% within 15 days. Furthermore, the blend films exhibited lesser water solubility, moisture content and swelling index after addition of white turmeric to chitosan (p < 0.05). The prepared films revealed extensive antimicrobial activity against gram positive and gram negative bacteria. The antioxidant activity and total phenolic content were improved upon the incorporation of white turmeric. Moreover, the oil absorption rate of the blend films was decreased by 46% in comparison with pristine film. Overall, white turmeric incorporated chitosan films were employed as a green packaging material to extend the shelf life of the foodstuff.

Emerging chitosan-essential oil films and coatings for food preservation - A review of advances and applications

With the rising demand for fresh and ready-to-eat foods, antimicrobial packaging has been developed to control or prevent microbial growth as well as maintain food quality and safety. Chitosan is an advanced biomaterial for antimicrobial packaging to meet the growing needs of safe and biodegradable packaging. The application of natural essential oils as antimicrobial agents effectively controls the growth of spoilage and pathogenic microbes. Thus, chitosan edible coatings and films incorporated with essential oils have expanded the general applications of antimicrobial packaging in food products. This review summarized the effect of essential oils on modifying the physicochemical characteristics of chitosan-based films. Notably, the antimicrobial efficacy of the developed composite films or coatings was highlighted. The advances in the preparation methods and application of chitosan films were also discussed. Broadly, this review will promote the potential applications of chitosan-essential oils composite films or coatings in antimicrobial packaging for food preservation.

Chitosan/Polyvinyl Alcohol/Tea Tree Essential Oil Composite Films for Biomedical Applications

Tissue engineering is crucial, since its early adoption focused on designing biocompatible materials that stimulate cell adhesion and proliferation. In this sense, scaffolds made of biocompatible and resistant materials became the researchers’ focus on biomedical applications. Humans have used essential oils for a long time to take advantage of their antifungal, insecticide, antibacterial, and antioxidant properties. However, the literature demonstrating the use of essential oils for stimulating biocompatibility in new scaffold designs is scarce. For that reason, this work describes the synthesis of four different film composites of chitosan/polyvinyl alcohol/tea tree (Melaleuca alternifolia), essential oil (CS/PVA/TTEO), and the subdermal implantations after 90 days in Wistar rats. According to the Young modulus, DSC, TGA, mechanical studies, and thermal studies, there was a reinforcement effect with the addition of TTEO. Morphology and energy-dispersive (EDX) analysis after the immersion in simulated body fluid (SBF) exhibited a light layer of calcium chloride and sodium chloride generated on the material’s surface, which is generally related to a bioactive material. Finally, the biocompatibility of the films was comparable with porcine collagen, showing better signs of resorption as the amount of TTEO was increased. These results indicate the potential application of the films in long-term biomedical needs.

Development of Ginkgo (Ginkgo biloba) Nut Starch Films Containing Cinnamon (Cinnamomum zeylanicum) Leaf Essential Oil

There have been many studies on the development biodegradable films using starch isolated from various food sources as a substitute for synthetic plastic packaging films. In this study, starch was extracted from ginkgo (Ginkgo biloba) nuts, which were mainly discarded and considered an environment hazard. The prepared starch (GBS) was then used for the preparation of antioxidant films by incorporating various amounts of cinnamon (Cinnamomum zeylanicum) essential oil (CZEO), which provides antioxidant activity. The prepared GBS films with CZEO were characterized by measuring physical, optical, and thermal properties, along with antioxidant activity (ABTS, DPPH, and FRAP) measurements. With the increasing amount of CZEO, the flexibility and antioxidant activities of the GBS films increased proportionally, whereas the tensile strength of the films decreased. The added CZEO also increased the water vapor permeability of the GBS films, and the microstructure of the GBS films was homogeneous overall. Therefore, the obtained results indicate that the developed GBS films containing CZEO are applicable as antioxidant food packaging.

New Active Packaging Based on Biopolymeric Mixture Added with Bacteriocin as Active Compound

The objective of this work was to develop a chitosan/agar-agar bioplastic film incorporated with bacteriocin that presents active potential when used as food packaging. The formulation of the film solution was determined from an experimental design, through the optimization using the desirability function. After establishing the concentrations of the biopolymers and the plasticizer, the purified bacteriocin extract of Lactobacillus sakei was added, which acts as an antibacterial agent. The films were characterized through physical, chemical, mechanical, barrier, and microbiological analyses. The mechanical properties and water vapor permeability were not altered by the addition of the extract. The swelling property decreased with the addition of the extract and the solubility increased, however, the film remained intact when in contact with the food, thus allowing an efficient barrier. Visible light protection was improved by increased opacity and antibacterial capacity was effective. When used as Minas Frescal cream cheese packaging, it contributed to the increase of microbiological stability, showing a reduction of 2.62 log UFC/g, contributing a gradual release of the active compound into the food during the storage time. The film had an active capacity that could be used as a barrier to the food, allowing it to be safely packaged.

Evaluation of easy-removing antioxidant films of chitosan with Melaleuca alternifolia essential oil

Chitosan - tea tree essential oil (TTEO) films were obtained as a new biodegradable material. Malic acid or lactic acid solvents were evaluated to obtain easy-removing films. The microstructure by SEM and FT-IR, the thermal properties by TGA/DSC, the mechanical properties, the water vapor permeability, the antioxidant (DPPH^• and ABTS^•+) activity and the optical properties of the formulated films were evaluated. A complete dissolution of the film in water was obtained. The elongation to break was higher in the films with malic acid (145.88-317.33%), comparing with those with lactic acid (25.54-44.08%). Chitosan film obtained in malic acid with TTEO showed the highest antioxidant activity. The colour and transparency of the samples did not suffer significant variations by TTEO addition. Films showed good UV-barrier properties, with a slightly improvement by TTEO addition. The films obtained showed a great potential for food packaging applications.

Corn Starch-Chitosan Nanocomposite Film Containing Nettle Essential Oil Nanoemulsions and Starch Nanocrystals: Optimization and Characterization

In the current study, nanocomposite films were produced based on corn starch:chitosan (CS:CH) biopolymers and the films were reinforced with nettle essential oil nanoemulsions (NEONEs) and starch nanocrystals (SNCs) to improve their physicochemical and mechanical properties. CS: CH at 70:30, 50:50, and 30:70 (w/w) ratios; SNCs at 2, 4, and 6% (w/w), and NEONEs at 0.5, 1, and 1.5% (w/w) were selected as variables. Then the various physical and mechanical attributes of chitosan-starch blended film containing SNCs and NEONEs were optimized using response surface methodology. The desirability function technique for the second-order polynomial models revealed that the following results could be achieved as the optimized treatment: water solubility of 51.56%; water absorption capacity of 128.75%; surface color of L (89.60), a (0.96), and b (1.90); water vapor permeability of 0.335 g/s Pa m, oxygen permeability of 2.60 cm3 μm/m2 d kPa; thickness of 154.41 µm, elongation at break of 53.54%; and tensile strength of 0.20 MPa at CS:CH of 38:62, SNC of 6.0%, and NEONEs of 0.41%. The nanocomposite film obtained can be employed as a novel biofunctional film with boosted physical mechanical and physical characteristics for food packaging applications.

Characterization of tea tree essential oil and large-ring cyclodextrins (CD9 -CD22 ) inclusion complex and evaluation of its thermal stability and volatility

BACKGROUND

Although the structure and physicochemical properties of large ring cyclodextrins (LR-CDs) exhibit unique characteristics, and also possess very strong water solubility and high safety, little is known about the embedding performance of macrocyclodextrin. Encapsulation refers to a complex of tea tree oil (TTO) with the wall material, protecting the core material or changing its properties from adverse external factors, controlling its release rate against the evaporation and degradation of essential oils. In the present study, LR-CDs complexed with TTO were prepared by co-precipitation methods.

RESULTS

The mass ratio of LR-CDs-TTO was six and the maximum complexation efficiency was 86.23%. Fourier-transform infrared spectroscopy analysis presented the loss of characteristic peaks related to TTO in the complex and no other additional peaks were observed. X-ray diffraction examination demonstrated several sharp peaks and intensity peaks at the diffraction angle of the TTO-LR-CDs complex. ¹ H-NMR indicated a chemical shift as a result of the interaction between the molecules in the inclusion complex. Moreover, the thermal stability and aqueous solubility of TTO were enhanced after synergy with LR-CDs; particularly, the solubility of the complex was increased by 329-fold. The volatile characteristics of the encapsulated and original TTO were identical.

CONCLUSION

The results of the present study show that TTO was efficaciously complexed with LR-CDs and exhibited enhanced solubility and thermal stability. © 2020 Society of Chemical Industry.

Development and characterization of chitosan films carrying Artemisia campestris antioxidants for potential use as active food packaging materials

Active food packaging films based on chitosan and enriched with Artemisia campestris hydroalcoholic extract (ACHE), aqueous extract (ACAE) and essential oil (ACEO) were developed. The effects of incorporating A. campestris were investigated on the physical, mechanical, thermal and antioxidant characteristics of the films. The structural properties of the films were evaluated using Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that adding ACHE and ACEO improved the water resistance of chitosan films. The FTIR spectroscopy analysis revealed covalent interaction and hydrogen bonding between chitosan and ACHE. The XRD and SEM analyses indicated that interactions occurred between the film matrix and A. campestris active compounds, which could be reflected by the physical and mechanical properties of composite films. Incorporating ACHE and ACAE in the chitosan matrix decreased the tensile strength. The film extensibility was reduced when ACHE and ACEO were added. All films exhibited great thermal stability as the degradation occurred above 300 °C. The addition of A. campestris active compounds, particularly extracts, to chitosan films notably increased the antioxidant and UV-Vis barrier properties. Chitosan films enriched with the A. campestris antioxidant compounds could be applied as food packaging alternatives.

Prospects of Polymeric Nanofibers Loaded with Essential Oils for Biomedical and Food-Packaging Applications

Essential oils prevent superbug formation, which is mainly caused by the continuous use of synthetic drugs. This is a significant threat to health, the environment, and food safety. Plant extracts in the form of essential oils are good enough to destroy pests and fight bacterial infections in animals and humans. In this review article, different essential oils containing polymeric nanofibers fabricated by electrospinning are reviewed. These nanofibers containing essential oils have shown applications in biomedical applications and as food-packaging materials. This approach of delivering essential oils in nanoformulations has attracted considerable attention in the scientific community due to its low price, a considerable ratio of surface area to volume, versatility, and high yield. It is observed that the resulting nanofibers possess antimicrobial, anti-inflammatory, and antioxidant properties. Therefore, they can reduce the use of toxic synthetic drugs that are utilized in the cosmetics, medicine, and food industries. These nanofibers increase barrier properties against light, oxygen, and heat, thereby protecting and preserving the food from oxidative damage. Moreover, the nanofibers discussed are introduced with naturally derived chemical compounds in a controlled manner, which simultaneously prevents their degradation. The nanofibers loaded with different essential oils demonstrate an ability to increase the shelf-life of various food products while using them as active packaging materials.

Emulsified blend film based on konjac glucomannan/carrageenan/ camellia oil: Physical, structural, and water barrier properties

The objective of this study was to develop a new hydrophobic film based on konjac glucomannan and kappa-carrageenan (KGM-KC) incorporating camellia oil (CO) (2, 4, and 6 %). CO was directly emulsified as a dispersed phase into KGM-KC matrix. The physical, structural, and water barrier properties of the film were studied. The results of Fourier transform infrared and scanning electron microscopy suggested that CO was successfully distributed in KGM-KC matrix by emulsification. Contact angle of the film indicated that addition of CO increased the hydrophobicity and water-resistance properties of film, which corresponding to the moisture content, total soluble mass, water vapor permeability, water vapor adsorption kinetics and water vapor adsorption isotherms. Addition of CO by emulsification improved thermal stability of film, optical properties, and mechanical properties. In conclusion, the incorporation of CO by emulsification is an effective and promising pathway to improve the properties of polysaccharide-based film.

Antibacterial polysaccharide-based hydrogel dressing containing plant essential oil for burn wound healing

BACKGROUND

Polysaccharide-based hydrogels have been developed for many years to treat burn wounds. Essential oils extracted from aromatic plants generally exhibit superior biological activity, especially antibacterial properties. Studies have shown that antibacterial hydrogels mixed with essential oils have great potential for burn wound healing. This study aimed to develop an antibacterial polysaccharide-based hydrogel with essential oil for burn skin repair.

METHODS

Eucalyptus essential oil (EEO), ginger essential oil (GEO) and cumin essential oil (CEO) were employed for the preparation of effective antibacterial hydrogels physically crosslinked by carboxymethyl chitosan (CMC) and carbomer 940 (CBM). Composite hydrogels were prepared and characterized using antimicrobial activity studies, Fourier-transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, gas chromatography-mass spectrometery, rheological analysis, viscosity, swelling, water loss rate and water vapor transmission rate studies. In addition, the biocompatibility of hydrogels was evaluated in vivo by cytotoxicity and cell migration assays and the burn healing ability of hydrogels was tested in vivo using burn-induced wounds in mice.

RESULTS

The different essential oils exhibited different mixing abilities with the hydrogel matrix (CMC and CBM), which caused varying levels of reduction in essential oil hydrogel viscosity, swelling and water vapor transmission. Among the developed hydrogels, the CBM/CMC/EEO hydrogel exhibited optimal antibacterial activities of 46.26 ± 2.22% and 63.05 ± 0.99% against Staphylococcus aureus and Escherichia coli, respectively, along with cell viability (>92.37%) and migration activity. Furthermore, the CBM/CMC/EEO hydrogel accelerated wound healing in mouse burn models by promoting the recovery of dermis and epidermis as observed using a hematoxylin-eosin and Masson's trichrome staining assay. The findings from an enzyme-linked immunosorbent assay demonstrated that the CBM/CMC/EEO hydrogel could repair wounds through interleukin-6 and tumor necrosis factor-α downregulation and transforming growth factor-β, vascular endothelial growth factor (VEGF) and epidermal growth factor upregulation.

CONCLUSIONS

This study successfully prepared a porous CBM/CMC/EEO hydrogel with high antibacterial activity, favorable swelling, optimal rheological properties, superior water retention and water vapor transmission performance and a significant effect on skin repair in vitro and in vivo. The results indicate that the CBM/CMC/EEO hydrogel has the potential for use as a promising burn dressing material for skin burn repair.

Antimicrobial Activity and GC-MS Profile of Copaiba Oil for Incorporation into Xanthosoma mafaffa Schott Starch-Based Films

The present study evaluated the effect of the incorporation of copaiba oil, in direct and in microencapsulated form, into films based on Xanthosoma mafaffa Schott starch. Initially, the characterization of copaiba oil by gas chromatograph coupled with mass spectrometry (GC-MS) and its antimicrobial activity against gram-positive and gram-negative bacteria was performed. The films were produced by the casting technique and characterized in relation to physical, chemical, structural, and antimicrobial activity. Sesquiterpenes, mainly β-caryophyllene, were the predominant compounds in copaiba oil, showing antimicrobial activity against B. subtilis and S. aureus. The films showed forming capacity, however, was observed a decrease in solubility and revealed an increase in hydrophobic characteristics. However, the oil reduced the tensile strength and elongation, while the microcapsules did not influence the mechanical properties in comparison to the control film. From microstructure analysis, changes in the films roughness and surface were observed after the addition of oil both directly and in microencapsulated form. Films incorporated with microparticles were able to inhibit the gram-positive bacteria tested, forming inhibition zones, indicating that the encapsulation of copaiba oil was more efficient for protecting bioactive compounds from the oil, suggesting the possible application of mangarito starch-based films incorporated with copaiba oil as biodegradable packaging.

Supramolecular aggregates of cyclodextrins with co-solvent modulate drug dispersion and release behavior of poorly soluble corticosteroid from chitosan membranes

In this study, the ability of different beta-cyclodextrins to facilitate homogeneous dispersion of triamcinolone acetonide (TA) into chitosan membranes is assessed. Drug loading was assessed through atomic force microscopy (AFM), scanning electron microscopy (MEV-FEG), and X-ray diffraction analyses. Drug interactions with the co-polymer were investigated with Fourier transform infrared spectroscopy, thermal analyses. Swelling assay, and in vitro drug release experiment were used to assess TA release behavior. Undispersed particles of drug were observed to remain in the simple chitosan membranes. Hydroxypropyl-β-cyclodextrin enabled the dispersion of TA into chitosan membranes and subsequent sustained drug release. In addition, the membrane performance as a drug delivery device is improved by adding specified amounts of the co-solvent triethanolamine. The experimental data presented in this study confirm the utility of our novel and alternative approach for obtaining a promising device for slow and controlled release of glucocorticoids, such as triamcinolone acetonide, for topical ulcerations.

Influence of Tea Tree Essential Oil and Poly(ethylene glycol) on Antibacterial and Physicochemical Properties of Polylactide-Based Films

The aim of the study was to establish the influence of poly(ethylene glycol) (PEG) on the properties of potential biodegradable packaging materials with antibacterial properties, based on polylactide (PLA) and tea tree essential oil (TTO). The obtained polymeric films consisted of PLA, a natural biocide, and tea tree essential oil (5–20 wt. %) was prepared with or without an addition of 5 wt. % PEG. The PLA-based materials have been tested, taking into account their morphology, and their thermal, mechanical and antibacterial properties against Staphylococcus aureus and Escherichia coli. It was established that the introduction of a plasticizer into the PLA–TTO systems leads to an increase in tensile strength, resistance to deformation, as well an increased thermal stability, in comparison to films modified using only TTO. The incorporation of 5 wt. % PEG in the PLA solution containing 5 wt. % TTO allowed us to obtain a material exhibiting a satisfactory antibacterial effect on both groups of representative bacteria. The presented results indicated a beneficial effect of PEG on the antibacterial and functional properties of materials with the addition of TTO.

In vitro and in vivo evaluation of gellan gum hydrogel films: Assessing the co impact of therapeutic oils and ofloxacin on wound healing

Herein, we report co-encapsulation of ofloxacin with tea tree or lavender oil in gellan gum based hydrogel films by solvent casting ionotropic gelation method as wound dressing. Prepared films were transparent, flexible, and displayed antioxidant activity with superior antibacterial response against common inhabitants of wound i.e. gram positive and negative bacteria. Solid-state characterization of optimized formulation (OL3 and OT3) revealed successful incorporation of drug and oils in hydrogel structure without any noticeable interaction. In vitro release studies showed an initial burst release but remaining portion released in controlled manner over 48 h from the films and furthermore, presence of oils did not affected the ofloxacin release. Optimized formulation containing ofloxacin and 25% w/w lavender/tea tree oil showed 98% wound contraction in rats after ten days of treatment. Histological images displayed completely healed epidermis. Taken together, our prepared hydrogel films demonstrated favorable features with appreciable antibacterial, wound healing activity and could be useful for the treatment of full thickness wounds.

Effectiveness of Cymbopogon citratus Oil Encapsulated in Chitosan on Colletotrichum gloeosporioides Isolated from Capsicum annuum

One of the principal etiological agents associated with losses in horticultural crops is the fungus Colletotrichum sp. This study aimed to evaluate the in vitro effectiveness of the essential oil (EO) from Cymbopogon citratus in chitosan supports for the control of Colletotrichum gloeosporioides isolated from sweet pepper plants.

METHODS

The extraction and phytochemical analysis of the EO of C. citratus were performed along with its encapsulation in chitosan-agar in order to compare it with other techniques and determine its effect on C. gloeosporioides.

RESULTS

The EO from the citral chemotype (58%) encapsulated in the chitosan-agar, with an 83% encapsulation efficiency in mass percentage, resulted in the total inhibition of mycelial growth at a minimum inhibitory concentration of 1370 ppm. This concentration was effective in controlling the disease under greenhouse conditions. The effectivity of the capsules containing EO was superior to that of other controls using EO evaluated in vitro. The capsules demonstrated an effective period of 51 days, with an additional 30 days of effectiveness after a reinfection cycle, thus providing similar results to the control with Trichoderma sp.

CONCLUSIONS

Chitosan capsules present a promising strategy in the use of C. citratus EO on C. gloeosporioides, and they are highly effective and stable under in vitro and field conditions.