Characterization of the radical scavenging activity of lignins--natural antioxidants

Selective Enzymatic Esterification of Lignin-Derived Phenolics for the Synthesis of Lipophilic Antioxidants

Lignin is an abundant and renewable source of phenolic compounds that can be used as natural antioxidants to substitute synthetic, petroleum-based alternatives. The development of lignin depolymerization techniques has improved the accessibility of low-molecular-weight phenolic fractions with enhanced antioxidant activity compared to native lignin. The selective esterification of the aliphatic OH groups in these compounds is necessary in order to increase their compatibility with hydrophobic product matrixes, while preserving their antioxidant capacity. In the present work, lipase was chosen as a selective catalyst for the esterification of the monolignol dihydroconiferyl alcohol (DCA), in order to target the esterification of aliphatic OHs without modifying the aromatic groups. The reaction was studied under solvent-assisted and solvent-free conditions, using different fatty acids and substrate ratios. A product yield of 97% could be obtained after 24 h in a solvent-assisted reaction with 2 molar equivalents of fatty acid, or after 3 h in a solvent-free reaction with 10 molar equivalents of the fatty acid. The esterified monolignol showed relevant long-term radical scavenging activity, comparable to other commercial, petroleum-based antioxidants. Different lignin fractions were also used as substrates for enzymatic esterification with different fatty acids, resulting in esterification degrees of 20–58% (of the total aliphatic OH), depending on the specific combination of fatty acid–lignin fractions.

Evaluation of oxy-organosolv pretreatment on lignin extraction from wheat straw

To develop a characteristic "Lignin-first" strategy, the oxy-organosolv delignification processes under mild conditions were comprehensively investigated. Results showed that lignin yield could achieve about 50 % under the optimum process conditions of ethanol concentration 80 %, temperature 90 °C, liquid to wheat straw ratio 25:1 for powdery-scale substrates, which was 65.0 % higher than that for rod-scale substrates under the same conditions. The lignin structural and carbohydrate component results demonstrated the employment of oxygen induced great quantities of lignin dissolving out on the premise of little carbohydrate component (<1 %) and lignin structural (mainly β-O-4 units) changes. Moreover, based on the molecular weight and polydiversity comparison results, the aqueous oxygen could transfer homogeneously in mild organosolv system and result in lignin degradation uniformly. Besides, the employment of oxygen assisted in not only extending the massive lignin removal stage to 30 min and 50 min for P-OEEL and R-OEEL respectively, but also boost the delignification rate with comparison to P-EL and R-EL. Lastly, the excellent anti-oxidant properties of lignin from oxy-organosolv process were demonstrated by scavenging DPPH and ABTS radicals. The economic calculations showed that the cost for lignin production were about 1.58USD/g lignin from powdery-scale wheat straw, providing a competitive route for high-value utilize waste biomass.

Effects of thermal and physical modification on functional properties of organosolv lignin from sugarcane bagasse and its application in cosmeceutical products

Organosolv lignin is an emerging bio-additive for creating functional properties in various products with its advantages in high-purity, sulfur-free, biocompatibility, and solubility in green solvents. In this study, effects of thermal and physical modification on alterations of functional properties and particle size distribution of isolated organosolv lignin from sugarcane bagasse (OLB) were studied. Thermal treatment of OLB at increasing temperatures from 170 to 230°C in 70%w/w aqueous ethanol led to alteration of phenolic hydroxyl content, while ultrasonication resulted in homogeneous size distribution of the modified OLB according to laser diffraction and scanning electron micrograph. The highest ultraviolet light absorbance and antioxidant activities were obtained at 190°C treatment which were correlated to the highest phenolic group content. Application of the modified OLB at 3% w/w in a base cream formulation resulted in enhancement of the anti-UV activity to exceed SPF 50 with increasing antioxidant activity in the product. The work provides basis on modification of organosolv lignin for application as a potent functional additive in cosmeceutical products.

Modification of Sugar Profile and Ripening in Atemoya (Annona × atemoya Mabb.) Fruits through Copper Hydroxide Application

Atemoya (Annona × atemoya Mabb.), a climacteric fruit of the Annonaceae family, is becoming increasingly popular due to its organoleptic and nutritional properties. Anthracnose, a fungus of the Colletotrichum genus, is one of the most serious diseases in orchards, causing significant damage if not controlled, so producers use phytosanitary products. The current study sought to investigate the quality of atemoya fruits after harvest in an orchard with anthracnose controlled by Cu(OH)² application: T1-no Cu(OH)², T2-7.8 mL Cu(OH)² L1 divided into two applications, T3-15.6 mL Cu(OH)² L1 divided into four, T4-8.0 mL Cu(OH)² L1 divided into eight, and T5-13.0 mL Cu(OH)² L1 divided into thirteen applications. The sugar profile of fruits was examined, as well as MDA, H₂O₂, and quality parameters such as pH, mass, soluble solids, titratable acidity, and maturation index. MDA, such as H₂O₂, can function as a signal molecule. Eight applications of 1.0 mL L-1 Cu(OH)² resulted in increased concentrations of H₂O₂ and MDA, signal molecules involved in sugar modification profiles such as glucose, fructose, and trehalose. It also had a high titratable acidity, a lower maturation index, better fruit quality, and a longer shelf life.

Utilization of chestnut shell lignin in alginate films

BACKGROUND

Lignocellulosic structures obtained from agricultural wastes can re-design sustainable packaging materials. The present study investigated the utilization of lignocellulose (LS), alkali lignin (L) and hydroxymethylated (modified) lignin (ML), separated from chestnut shells in alginate (AL) films at 100 and 200 mg g^-1 (10% and 20%, w/w based on AL), as reinforcing agents. Lignin modification and concentration effects on the AL films were characterized by water vapor permeability (WVP), as well as morphological, mechanical, optical, thermal and active properties.

RESULTS

Fourier transform infrared spectroscopy results showed that extracted L and LS had different structures, and the modification of L resulted in a peak shift and a decrease in peak intensities between 1250 and 800 cm^-1 . The antioxidant and antimicrobial activity tests showed that films containing L had higher activity values (P < 0.05). WVP of the films containing ML was the lowest (P < 0.05) and the results revealed that 20% (w/w) concentration had an adverse effect on the WVP of films. The addition of L, LS and ML increased the tensile strength, elastic modulus and thermal properties (P < 0.05) compared to AL control films. With an increasing concentration, films containing L-based structures showed higher opacity and relatively lower L* values (P < 0.05).

CONCLUSION

These results show that the addition of lignin to biopolymers is a promising method for improving the properties of biopolymers and providing functional attributes. LS had no or little effect on the film properties; however, the modification of L had the advantage of enhancing WVP and thermal properties at the same time as showing a decrease in functional properties compared to L. © 2022 Society of Chemical Industry.

Pharmaceutical applications of lignin-derived chemicals and lignin-based materials: linking lignin source and processing with clinical indication

Lignocellulosic biomass is one of the most abundant bioresources on Earth. Over recent decades, various valorisation techniques have been developed to produce value-added products from the cellulosic and hemicellulosic fractions of this biomass. Lignin is the third major component accounting for 10-30% (w/w). However, it currently remains a largely unused fraction due to its recalcitrance and complex structure. The increase in the global demand for lignocellulosic biomass, for energy and chemical production, is increasing the amount of waste lignin available. Approaches to date for valorizing this renewable but heterogeneous chemical resource have mainly focused on production of materials and fine chemicals. Greater value could be gained by developing higher value pharmaceutical applications which would help to improve integrated biorefinery economics. In this review, different lignin extraction methods, such as organosolv and ionic liquid, and the properties and potential of the extracted chemical building blocks are first summarized with respect to pharmaceutical use. The review then discusses the many recent advances made regarding the medical or therapeutic potential of lignin-derived materials such as antimicrobial, antiviral, and antitumor compounds and in controlled drug delivery. The aim is to draw out the link between the source and the processing of the biomass and potential clinical applications. We then highlight four key areas for future research if therapeutic applications of lignin-derived products are to become commercially viable. These relate to the availability and processing of lignocellulosic biomass, technologies for the purification of specific compounds, enhancements in process yield, and progression to human clinical trials.

Solvent-free synthesis of high-performance polyurethane elastomer based on low-molecular-weight alkali lignin

Using cheap and green lignin as a partial substitute for petroleum-based polyols is highly attractive for sustainable development of polyurethane elastomers (LPUes). However, the traditional synthesis process of LPUes inevitably uses toxic solvents that are difficult to remove or carcinogenic. Here, we reported a solvent-free synthesis method to prepare lignin-containing polyurethane elastomers (SF-LPUes) with high strength, high toughness and high elasticity. Most of the hydroxyl groups of lignin reacted with isocyanates to form a strong chemical cross-linking network, while the unreacted ones formed a dynamic hydrogen bond network with polyurethane matrix, contributing to the in-situ formation of lignin nanoparticles to build a nano-micro phase separation structure. Consequently, a dual-crosslinking network structure was formed and endowed SF-LPUes with excellent mechanical properties. Especially, the SF-LPUes prepared from low molecular alkali lignin possessed a tensile strength as high as 38.2 MPa, a maximum elongation at break of 1108 %, and an elastic recovery ratio of up to 98.7 %. Moreover, SF-LPUes showed impressing reprocessing performance and aging resistance. This work provides an industrial application prospect for the synthesis of lignin-containing polyurethane elastomers via a solvent-free synthesis process.

Effective fractionation of lignocellulose components and lignin valorization by combination of deep eutectic solvent with ethanol

Introduction: A combination of deep eutectic solvent with ethanol was developed for pretreatment of Broussonetia papyrifera to effectively extract lignin and promote the subsequent enzymatic hydrolysis. Methods: In order to further explore the optimal conditions for enzymatic hydrolysis, a central composite design method was applied. Results and Discussion: The correlation between each factor and glucose yield was obtained, and the optimal conditions was 160°C, 60 min, the ratio of DES to E was 1/1 (mol/mol). The results showed that compared with control, the glucose yield increased by 130.67% under the optimal pretreatment conditions. Furthermore, the specific surface area of biomass was increased by 66.95%, and the content of xylan and lignin was decreased by 86.71% and 85.83%. The correlation between xylan/lignin removal and enzymatic hydrolysis showed that the removal of lignin facilitated the glucose yield more significantly than that of xylan. To further explore the lignin valorization, the structural and antioxidant analysis of recovered lignin revealed that high temperature was favorable for lignin with good antioxidant performance. This pretreatment is a promising method for separating lignin with high antioxidant activity and improving cellulose digestibility.

All Fiber is Not Fiber

PURPOSE OF REVIEW

Epidemiologic studies and clinical trials have demonstrated the benefits of dietary fiber. This occurs through a combination of the physiochemical properties of fiber and through microbial fermentation that occurs in the colon which result in the production of short-chain fatty acids (SCFA). The purpose of this review is to highlight the physiochemical properties of fiber that result in the range of physiologic effects and to review the literature on the health benefits of acetate, propionate, and butyrate.

RECENT FINDINGS

Of the variety of properties and functions exerted by dietary fibers, the fermentability and production of SCFA's are emphasized in this review. Studies done in both animal and humans reveal the anti-obesity, anti-inflammatory, and possible anti-neoplastic roles SCFAs exert at the mucosal level. Many clinical questions remain regarding the optimal dose, type, and method of delivery of fiber to exert the desired beneficial effects. It has the potential to be used in the management of clinical symptoms, prevention of disease, and improvement in human health. Further studies to address this novel use of fiber has the potential to make a large impact in clinical practice.

Lignin as a bioactive polymer and heavy metal absorber- an overview

As a pulping and bio-refinery by-product with phenolic chemical structure, lignin indicated high potential as natural antioxidant activity, UV blocker, antibacterial and toxic material absorbent properties. Presence of phenolic hydroxyl groups in lignin structure plays the main role of its antioxidant activity. However, lignin antioxidant power can change depending on its other structural features and functional groups like ortho-methoxy groups, -OCH₃ groups, the α-CH₂ groups, the aliphatic carbonyl groups, and the size of π-conjugated systems. Lignin in mixture with synthetic polymers, improved their thermal stability. Lignin has high UV light absorbing potential in broad-spectrum (UVA, UVB). Adding 1-5% of lignin into hand cream indicated excellent range of sun protection factor (SPF) with more than 95% UV light absorption. Lignin also indicated strong UV light protection when applied in different transparent film and protect paint, oil, and varnish from UV degradation. Lignosulfonate and other modified lignin including chemically modification, nano-particles and lignin hydrogel indicated high potential as heavy metal absorber.

Guaiacol oxidation: theoretical insight into thermochemistry of radical processes involving methoxy group demethylation

Guaiacol (2-methoxyphenol) is naturally occurring phenolic compound essential in various research areas. Oxidative transformation of guaiacol can lead to the formation of various products, including 1,3-benzodioxole or ortho-quinone. Therefore, this study is focused on the investigation of the reaction enthalpies of experimentally observed guaiacol oxidation pathways in gas-phase, as well as in non-polar environment and aqueous solution. Corresponding Density Functional Theory (DFT) calculations were carried out using two hybrid functionals (M06-2X and B3LYP-D3). All reaction enthalpies, as well as Gibbs free energies, were also calculated using composite ab initio G4 method. M06-2X and G4 results show mutual agreement and the best accordance with available experimentally determined reaction enthalpies. Obtained Gibbs free reaction energies indicate that formation of ortho-quinone is thermodynamically preferred to formation of 1,3-benzodioxole at 298 K in studied environments. Moreover, all computational methods confirm that the reaction enthalpy of methoxy group demethylation, i.e. O-C bond dissociation enthalpy (BDE), is substantially lower in comparison to the enthalpy of hydrogen atom transfer from phenolic OH group. In the case of phenoxide anion of guaiacol, which can be formed in ionization supporting solvents, O-C BDE shows further significant decrease, exceeding 50 kJ mol^-1, in comparison to parent molecule.HIGHLIGHTSReaction enthalpies and Gibbs free energies of individual steps of guaiacol transformation to 1,3-benzodioxole or ortho-quinone are studied in three environments.M06-2X functional and composite ab initio G4 methods provide reliable O-H and O-C bond dissociation enthalpies.Dissociation enthalpy of methoxy group O-C bond is lower by ca. 100 kJ mol^-1 in comparison to phenolic O-H bond.Phenoxide anion of guaiacol shows substantially lower O-C BDE than parent molecule.

Multifunctional lignin-poly (lactic acid) biocomposites for packaging applications

Lignin is the most abundant aromatic biopolymer with many promising features but also shortcomings as a filler in polymer blends. The main objective of this work was to improve the processability and compatibility of lignin with poly (lactic acid) (PLA) through etherification of lignin. Commercial kraft lignin (KL) and oxypropylated kraft lignin (OPKL) were blended with PLA at different weight percentages (1, 5, 10, 20, and 40%) followed by injection molding. Low lignin contents between 1 and 10% generally had a favorable impact on mechanical strength and moduli as well as functional properties of the PLA-based composites. Unmodified lignin with free phenolic hydroxyl groups rendered the composites with antioxidant activity, as measured by radical scavenging and lipid peroxidation tests. Incorporating 5–10% of KL or OPKL improved the thermal stability of the composites within the 300–350°C region. DSC analysis showed that the glass transition temperature values were systematically decreased upon addition of KL and OPKL into PLA polymer. However, low lignin contents of 1 and 5% decreased the cold crystallization temperature of PLA. The composites of KL and OPKL with PLA exhibited good stabilities in the migration test, with values of 17 mg kg⁻¹ and 23 mg kg⁻¹ even at higher lignin content 40%, i.e., well below the limit defined in a European standard (60 mg kg⁻¹). These results suggest oxypropylated lignin as a functional filler in PLA for safe and functional food packaging and antioxidant applications.

Surface chemistry and bioactivity of colloidal particles from industrial kraft lignins

The morphology control of lignin through particle size reduction to nanoscale seems to be a suitable conversion technology to overcome the intrinsic limitations of its native form to develop a wide range of biomaterials with high performance. Colloidal lignin particles (CLPs) in the range of 150-200 nm were synthesised from hardwood and softwood kraft lignins by the solvent shifting method. The initial molecular features of kraft lignins were evaluated in terms of purity, molecular weight distribution, and chemical functionalities. The impact of the lignin source and structure on the morphology, size distribution, and surface chemistry of CLPs was evaluated by particle size analyser, SEM, TEM and ¹H NMR. The results evidenced the influence of the botanical origin on the morphology and surface chemistry of particles. Furthermore, the antioxidant properties and cytotoxicity of lignins and corresponding CLPs, towards lung fibroblast cells were compared. CLPs from hardwood kraft lignins exhibited higher antioxidant power against DPPH free radical and a higher cytotoxic effect (IC₃₀ = 67-70 μg/mL) against lung fibroblast when compared to CLPs from softwood kraft lignin (IC₃₀ = ~91 μg/mL). However, the cytotoxicity of these biomaterials was dose-dependent, suggesting their potential application as active ingredients in cosmetic and pharmaceutic products at low concentrations.

Effect of Thermal Oxygen Aging Mode on Rheological Properties and Compatibility of Lignin-Modified Asphalt Binder by Dynamic Shear Rheometer

Lignin is abundant in nature. The use of lignin in the asphalt pavement industry can improve pavement performance while effectively optimizing pavement construction costs. The purpose of this paper is to study the effect of lignin on the anti-aging properties of asphalt. Commercial lignin was selected to prepare a lignin-modified asphalt binder. The properties of lignin-modified asphalt were studied by rheological experiments. The high-temperature rheological properties of two kinds of base asphalt and modified asphalt samples with different contents of lignin under three conditions of original, rolling thin film oven (RTFO) aging, and pressure aging vessel (PAV) were tested and analyzed with temperature sweep, frequency sweep, and multiple stress creep recovery (MSCR) tests. By comparing the variation laws of evaluation indicators, such as complex shear modulus G*, phase angle δ, anti-aging index, cumulative strain, and viscous component Gv, we found that lignin could effectively improve the high-temperature stability of base asphalt, but it had a negative impact on the compatibility issues of base asphalt. Meanwhile, lignin played a filling role in the base asphalt, and the increase in viscosity was the fundamental reason for improving the high-temperature stability of the base asphalt. The research results indicated that lignin could effectively improve the anti-aging performance of asphalt and play a positive role in prolonging the service life of pavement.

Dysregulation of Cell Envelope Homeostasis in Staphylococcus aureus Exposed to Solvated Lignin

Lignin is an aromatic plant cell wall polymer that facilitates water transport through the vasculature of plants and is generated in large quantities as an inexpensive by-product of pulp and paper manufacturing and biorefineries. Although lignin's ability to reduce bacterial growth has been reported previously, its hydrophobicity complicates the ability to examine its biological effects on living cells in aqueous growth media. We recently described the ability to solvate lignin in Good's buffers with neutral pH, a breakthrough that allowed examination of lignin's antimicrobial effects against the human pathogen Staphylococcus aureus. These analyses showed that lignin damages the S. aureus cell membrane, causes increased cell clustering, and inhibits growth synergistically with tunicamycin, a teichoic acid synthesis inhibitor. In the present study, we examined the physiological and transcriptomic responses of S. aureus to lignin. Intriguingly, lignin restored the susceptibility of genetically resistant S. aureus isolates to penicillin and oxacillin, decreased intracellular pH, impaired normal cell division, and rendered cells more resistant to detergent-induced lysis. Additionally, transcriptome sequencing (RNA-Seq) differential expression (DE) analysis of lignin-treated cultures revealed significant gene expression changes (P < 0.05 with 5% false discovery rate [FDR]) related to the cell envelope, cell wall physiology, fatty acid metabolism, and stress resistance. Moreover, a pattern of concurrent up- and downregulation of genes within biochemical pathways involved in transmembrane transport and cell wall physiology was observed, which likely reflects an attempt to tolerate or compensate for lignin-induced damage. Together, these results represent the first comprehensive analysis of lignin's antibacterial activity against S. aureus. IMPORTANCE S. aureus is a leading cause of skin and soft tissue infections. The ability of S. aureus to acquire genetic resistance to antibiotics further compounds its ability to cause life-threatening infections. While the historical response to antibiotic resistance has been to develop new antibiotics, bacterial pathogens are notorious for rapidly acquiring genetic resistance mechanisms. As such, the development of adjuvants represents a viable way of extending the life span of current antibiotics to which pathogens may already be resistant. Here, we describe the phenotypic and transcriptomic response of S. aureus to treatment with lignin. Our results demonstrate that lignin extracted from sugarcane and sorghum bagasse restores S. aureus susceptibility to β-lactams, providing a premise for repurposing these antibiotics in treatment of resistant S. aureus strains, possibly in the form of topical lignin/β-lactam formulations.

Effect of alkaline and deep eutectic solvents pretreatments on the recovery of lignin with antioxidant activity from grape stalks

Grape stalks are lignocellulosic residues that can be valorized through the extraction of lignin - an underutilized biopolymer with high potential. Two lignin extraction methods, alkaline and deep eutectic solvents (DES), were studied, and experimental designs were carried out to obtain the best extraction conditions. The defined parameters for alkaline extraction allowed the recovery of ~48 % of lignin with low purity that was further improved with an autohydrolysis pretreatment (~79 % purity; ~32 % yield). Optimum parameters of DES method rendered high purity lignin (~90 %) without the need of a pretreatment and with a better yield (50.2 % (±2.3)) than the alkaline method. Both lignin fractions presented high antioxidant activities, being close to the antioxidant capacity of BHT for DPPH scavenging. Structural analysis proved the presence of lignin in both alkaline and DES samples with similar morphology. Overall, DES method was more efficient in the extraction of lignin from grape stalks besides its greener and sustainable nature. This work is uses DES to extract lignin from this biomass while comparing it with a commonly classical method, proving that grape stalks can be used to extract lignin with a sustainable and efficient method rendering a final ingredient with value-added properties.

Preparation of uniform lignosulfonate-based colloidal spheres for UV-absorbing thermoplastics

Lignosulfonate-based colloidal spheres were prepared from sodium lignosulfonate and cetyltrimethylammonium bromide (NaLS/CTAB) complex through electrostatic and hydrophobic self-assembly. Due to the stronger hydrophobicity and UV-blocking performance, NaLS/CTAB colloids were easier to be blended with HDPE than lignosulfonate, and therefore applied to UV-absorbing thermoplastics. Results showed NaLS/CTAB colloidal spheres had a particle size of 160 nm with a polydispersity index of 0.081. NaLS/CTAB molecules started to form spheres at critical water content of 64 vol% when the initial concentration of NaLS/CTAB in EtOH was 0.5 mg/cm³ and the obtaining of colloids was completed at a water content of 90 vol%. The size and polydispersity of spheres were well controlled by adjusting initial concentrations of NaLS/CTAB in EtOH. Since NaLS/CTAB colloidal spheres retained phenylpropane units and phenolic hydroxyl groups of NaLS, NaLS/CTAB/HDPE composites displayed excellent UV-absorbing properties. Meanwhile, the mechanical property of NaLS/CTAB/HDPE composites was also superior to that of frequently-used CaCO₃/HDPE materials in industry, reaching the requirement of industrial uses. However, too high additions would result in the increased agglomeration of NaLS/CTAB spheres in HDPE, and thus the deteriorated mechanical property. Additionally, the added spheres played a role of "ball", which caused the decreased viscosity, improved flowability and processability of composites.

Uniformly Dispersed Poly(lactic acid)-Grafted Lignin Nanoparticles Enhance Antioxidant Activity and UV-Barrier Properties of Poly(lactic acid) Packaging Films

Poly(lactic acid) (PLA) represents one of the most widely used biodegradable polymers for food packaging applications. While this material provides many advantages, it is characterized by limited antioxidant and UV-barrier properties. Blending PLA with lignin is an attractive strategy to address these limitations. Lignin possesses antioxidant properties and absorbs UV-light and is a widely available low value byproduct of the paper and pulp industry. This study has explored the use of lignin nanoparticles to augment the properties of PLA-based films. A central challenge in the preparation of PLA-lignin nanoparticle blend films is to avoid nanoparticle aggregation, which could compromise optical properties as well as antioxidant activity, among others. To avoid nanoparticle aggregation in the PLA matrix, PLA-grafted lignin nanoparticles were prepared via organocatalyzed lactide ring-opening polymerization. In contrast to lignin and unmodified lignin nanoparticles, these PLA-grafted lignin nanoparticles could be uniformly dispersed in PLA for lignin contents up to 10 wt %. The addition of as little as the equivalent of 1 wt % of lignin of these nanoparticles effectively blocked transmission of 280 nm UV-light. At the same time, these blend films retained reasonable visible light transmittance. The optical properties of the PLA lignin blend films also benefited from the well-dispersed nature of the PLA-grafted nanoparticles, as evidenced by significantly higher visible light transmittance of blends of PLA and PLA-grafted nanoparticles, as compared to blends prepared from PLA with lignin or unmodified lignin nanoparticles. Finally, blending PLA with PLA-grafted lignin nanoparticles greatly augments the antioxidant activity of these films.

Sustainable lignin and lignin-derived compounds as potential therapeutic agents for degenerative orthopaedic diseases: A systemic review

Lignin, the most abundant natural and sustainable phenolic compound in biomass, has exhibited medicinal values due to its biological activities decided by physicochemical properties. Recently, the lignin and its derivatives (such as lignosulfonates and lignosulfonate) have been proven efficient in regulating cellular process and the extracellular microenvironment, which has been regarded as the key factor in disease progression. In orthopaedic diseases, especially the degenerative diseases represented by osteoarthritis and osteoporosis, excessive activated inflammation has been proven as a key stage in the pathological process. Due to the excellent biocompatibility, antibacterial and antioxidative activities of lignin and its derivatives, they have been applied to stimulate cells and restore the uncoupling bone remodeling in the degenerative orthopaedic diseases. However, there is a lack of a systemic review to state the current research actuality of lignin and lignin-derived compounds in treating degenerative orthopaedic diseases. Herein, we summarized the current application of lignin and lignin-derived compounds in orthopaedic diseases and proposed their possible therapeutic mechanism in treating degenerative orthopaedic diseases. It is hoped this work could guide the future preparation of lignin/lignin-derived drugs and implants as available therapeutic strategies for clinically degenerative orthopaedic diseases.

Development of Nanocoated Filaments for 3D Fused Deposition Modeling of Antibacterial and Antioxidant Materials

Three-dimensional (3D) printing is one of the most futuristic manufacturing technologies, allowing on-demand manufacturing of products with highly complex geometries and tunable material properties. Among the different 3D-printing technologies, fused deposition modeling (FDM) is the most popular one due to its affordability, adaptability, and pertinency in many areas, including the biomedical field. Yet, only limited amounts of materials are commercially available for FDM, which hampers their application potential. Polybutylene succinate (PBS) is one of the biocompatible and biodegradable thermoplastics that could be subjected to FDM printing for healthcare applications. However, microbial contamination and the formation of biofilms is a critical issue during direct usage of thermoplastics, including PBS. Herein, we developed a composite filament containing polybutylene succinate (PBS) and lignin for FDM printing. Compared to pure PBS, the PBS/lignin composite with 2.5~3.5% lignin showed better printability and antioxidant and antimicrobial properties. We further coated silver/zinc oxide on the printed graft to enhance their antimicrobial performance and obtain the strain-specific antimicrobial activity. We expect that the developed approach can be used in biomedical applications such as patient-specific orthoses.

Effect of Two-Step Formosolv Fractionation on the Structural Properties and Antioxidant Activity of Lignin

The formosolv fractionation process has been demonstrated to be an effective approach toward lignin recovery as an antioxidant from lignocellulosic biomass. In this study, four lignin fractions, FL-88%, FSL-70%, FIL-70% and FL-EtAc, were isolated from Phragmites australis biomass through two-step formosolv fractionation (88% formic acid delignification followed by 70% aqueous formic acid fractionation). To better understand the structural properties of the lignin obtained from this fractionation process, four isolated lignins were successfully characterized by gel permeation chromatography (GPC), Fourier transform infrared (FT-IR), two-dimensional heteronuclear single quantum coherence nuclear magnetic resonance (2D-HSQC NMR) spectroscopy, thermogravimetric analysis (TGA) and gas chromatograph-mass spectroscopy (GC/MS). It was found that lignin depolymerization via β-O-4 cleavage occurred via a formylation, elimination and hydrolysis mechanism, accompanied by a competitive condensation reaction. Noteworthily, two-step formosolv fractionation can produce specific lignin fractions with different ABTS and DPPH radical scavenging activities. The FL-EtAc fraction with low molecular weight (M_w = 2748 Da) and good homogeneity (PDI = 1.5) showed excellent antioxidant activity, compared with the other three isolated lignin fractions, even equal to that of commercial antioxidant BHT at the same concentration of 2.0 mg·mL⁻¹. These findings are of great help for specific lignin from biomass as a natural antioxidant in the future.

Valorization of lignins from energy crops and agro-industrial byproducts as antioxidant and antibacterial materials

BACKGROUND

Developing eco-friendly antioxidant and antimicrobial substances originating from biomass residues has recently attracted considerable interest. In this study, two lignosulfonates and various oxidized water-soluble lignins were investigated for their antioxidant properties, as assessed by ABTS, DPPH and Folin-Ciocalteu methods, and their antimicrobial activity against some bacterial strains responsible for human pathologies.

RESULTS

The lignosulfonates showed the largest antiradical/antimicrobial capacity, whereas the other substrates were less effective. The observed antioxidant/antibacterial properties were positively correlated with lignin aromatic/phenolic content. The positive correlation between antiradical and antimicrobial activities suggests that lignin scavenging capacity was also involved in its antibacterial activity. A greater antimicrobial performance was generally observed against Gram-positive bacterial strains, and it was attributed to the intrinsic larger susceptibility of Gram-positive bacteria to lignin phenols. A significant though lesser inhibitory activity was also found against Escherichia coli.

CONCLUSION

Our results confirmed the dependence of lignin antioxidant/antibacterial power on its extraction method and chemical structure, as well as on the type of bacterial strains. Identifying the relationship between lignin molecular composition and its antioxidant/antibacterial features represents an advance on the potential future use of renewable and eco-compatible lignin materials in nutraceutical, pharmaceutical and cosmetic sectors. © 2021 Society of Chemical Industry.

Kraft Lignin/Tannin as a Potential Accelerator of Antioxidant and Antibacterial Properties in an Active Thermoplastic Polyester-Based Multifunctional Material

This research focuses on key priorities in the field of sustainable plastic composites that will lead to a reduction in CO₂ pollution and support the EU’s goal of becoming carbon neutral by 2050. The main challenge is to develop high-performance polyphenol-reinforced thermoplastic composites, where the use of natural fillers replaces the usual chemical additives with non-toxic ones, not only to improve the final performance but also to increase the desired multifunctionalities (structural, antioxidant, and antibacterial). Therefore, poly (lactic acid) (PLA) composites based on Kraft lignin (KL) and tannin (TANN) were investigated. Two series of PLA composites, PLA-KL and PLA-TANN, which contained natural fillers (0.5%, 1.0%, and 2.5% (w/w)) were prepared by hot melt extrusion. The effects of KL and TANN on the PLA matrices were investigated, especially the surface physicochemical properties, mechanical properties, and antioxidant/antimicrobial activity. The surface physicochemical properties were evaluated by measuring the contact angle (CA), roughness, zeta potential, and nanoindentation. The results of the water contact angle showed that neither KL nor TANN caused a significant change in the wettability, but only a slight increase in the hydrophilicity of the PLA composites. The filler loading, the size of the particles with their available functional groups on the surfaces of the PLA composites, and the interaction between the filler and the PLA polymer depend on the roughness and zeta potential behavior of the PLA-KL and PLA-TANN composites and ultimately improve the surface mechanical properties. The antioxidant properties of the PLA-KL and PLA-TANN composites were determined using the DPPH (2,2′-diphenyl-1-picrylhydrazyl) test. The results show an efficient antioxidant behavior of all PLA-KL and PLA-TANN composites, which increases with the filler content. Finally, the KL- and PLA-based TANN have shown resistance to the Gram-negative bacteria, E. coli, but without a correlation trend between polyphenol filler content and structure.

Sea Buckthorn (Hippophae rhamnoides) Waste Biomass after Harvesting as a Source of Valuable Biologically Active Compounds with Nutraceutical and Antibacterial Potential

For sustainable sea buckthorn (Hippophae rhamnoides) berry production, the task at hand is to find an application for the large amount of biomass waste arising at harvesting. Sea buckthorn (SBT) vegetation is currently poorly studied. The purpose of this research was to assess the composition and potential of SBT twigs as a source of valuable biologically active substances. Water and 50% EtOH extracts of twigs of three Latvian SBT cultivars with a high berry yield and quality, popular for cultivation in many countries (H. rhamnoides 'Maria Bruvele', 'Tatiana', 'Botanicheskaya Lubitelskaya'), were investigated for the first time. The phytochemical composition (UHPLC-ESI-MS/MS analysis) and biological activity of the obtained hydrophilic extracts were determined. The highest yield of polyphenolic compounds and serotonin was observed for 'Maria Bruvele'. Hydrophilic extracts were investigated for radical scavenging activity (DPPH˙ test), antibacterial/antifungal activity against five pathogenic bacteria/yeast, cytotoxicity, and the enzymatic activity of alpha-amylase (via in vitro testing), which is extremely important for the treatment of people with underweight, wasting, and malabsorption. The results showed a high potential of sea buckthorn biomass as a source of valuable biologically active compounds for the creation of preparations for the food industry, nutraceuticals, and cosmetics.

How far is Lignin from being a biomedical material?

Lignin is a versatile biomass that possesses many different desirable properties such as antioxidant, antibacterial, anti-UV, and good biocompatibility. Natural lignin can be processed through several chemical processes. The processed lignin can be modified into functionalized lignin through chemical modifications to develop and enhance biomaterials. Thus, lignin is one of the prime candidate for various biomaterial applications such as drug and gene delivery, biosensors, bioimaging, 3D printing, tissue engineering, and dietary supplement additive. This review presents the potential of developing and utilizing lignin in the outlook of new and sustainable biomaterials. Thereafter, we also discuss on the challenges and outlook of utilizing lignin as a biomaterial.

Ethanol organosolv lignin from different agricultural residues: Toward basic structural units and antioxidant activity

The growing interest in the substitution of synthetic food antioxidants by natural ones has fostered research on vegetable sources and the screening of raw materials for identifying new antioxidants. Special attention is focused on their extraction from inexpensive or residual sources from agricultural industries. Herein, the antioxidant activities of lignin obtained from 4 residual sources were investigated. The obtained lignin samples were characterized by different analytical techniques evaluating their chemical structure, phenolic content, thermal behavior and molecular weight. The antioxidant activity of the analyzed lignins was evaluated by the DPPH assay, the radical ABTS assay, and trivalent iron reduction method. It was found t that lignin antioxidants could scavenge free radicals and reduce oxidants. The high correlation between antioxidant capacity and its total phenol content indicated that phenolic hydroxyl groups were the main contributors to these lignins' antioxidant activity.

Solid acid facilitated deep eutectic solvents extraction of high-purity and antioxidative lignin production from poplar wood

Pure deep eutectic solvents (DESs) system of choline chloride (ChCl)/Lactic acid (Lac) were demonstrated to be an effective strategy for extraction of lignin. In this study, two kinds of different promising solid acid (SA) with DESs were designed to promote the pretreatment of lignocellulose. The SA of phosphotungstic acid (H₃O₄₀PW₁₂) and iron bromide (FeBr₃) were introduced into DESs to extract poplar wood lignin and evaluate the antioxidant activity. It was found that 82.2% and 80.9% of lignin were obtained from poplar wood under H₃O₄₀PW₁₂-ChCl/Lac acid and FeBr₃-choline ChCl/Lac system with 4 h and 8 h, respectively. The lignin fractions with a high purity (>89%), low molecular weight (Mw 1800-2000 g/mol). Besides, the antioxidant activities of lignin fractions were better than butyl hydroxyanisole (BHA). Therefore, DES lignin has prominent antioxidant activity and could developed a potential natural cosmetics and food packaging.

Biological Activities and Emerging Roles of Lignin and Lignin-Based Products─A Review

Bioactive substances, displaying excellent biocompatibility, chemical stability, and processability, could be extensively applied in biomedicine and tissue engineering. In recent years, plant-based bioactive substances such as flavonoids, vitamins, terpenes, and lignin have received considerable attention due to their human health benefits and pharmaceutical/medical applications. Among them is lignin, an amorphous biomacromolecule mainly derived from the combinatorial radical coupling of three phenylpropane units (p-hydroxypenyl, guaiacyl, and syringyl) during lignification. Lignin possesses intrinsic bioactivities (antioxidative, antibacterial, anti-UV activities, etc.) against phytopathogens. Lignin also enhances the plant resistance (adaptability) against environmental stresses. The abundant structural features of lignin offer other significant bioactivities including antitumor and antivirus bioactivities, regulation of plant growth, and enzymatic hydrolysis of cellulose. This Review reports the latest research results on the bioactive potential of lignin and lignin-based substances in biomedicine, agriculture, and biomass conversion. Moreover, the interfacial reactions and bonding mechanisms of lignin with biotissue/cells and other constituents were also discussed, aiming at promoting the conversion or evolution of lignin from industrial wastes to value-added bioactive materials.

Antioxidant Activity of Different Extracts from Black Alder (Alnus glutinosa) Bark with Greener Extraction Alternative

Phenolic compounds isolated from plant biomass consist of bioactive components showing a wide range of benefits for humans, including antioxidant, antimicrobial or anti-inflammatory effects. This paper presents the potential value of black alder (Alnus glutinosa (L.) Gaertn. (Betulaceae)) bark for the production of biologically active substances, despite its current use as a low value fuel source. Most of the extraction methods employ neat organic solvents to obtain extracts with a high antioxidant potential from biomass. The aim of this work is to show the advantages and disadvantages of the extraction process by taking into account the principles of 'green chemistry' and replacing the organic solvents with 'green' solvent water. Using the advantages of accelerated solvent extraction (ASE), it has been shown that the use of deionized water has the prospect of replacing organic solvents. In the case of the one-step water extraction, the total polyphenol content (TPC) varies from 0.55 to 0.62 Gallic acid equivalent (GAE) g/g in the extracts, depending on the temperature, whereas with the result of the sequential extraction with the organic solvents, the TPC content of the 40% (v:v) ethanol extracts ranges from 0.39 to 0.61 GAE g/g, depending on the temperature. The influence of the total polyphenol content and the total proanthocyanidin content on the antioxidant activity is shown. The antioxidant activity (IC₅₀, mg/L) of the extracts obtained with the organic solvents in the (2,2-diphenyl-1-picrylhydrazyl) DPPH^• test varies from 4.05 to 9.58, depending on the temperature in the range of 70-150 °C, respectively, while the results obtained with the deionized water showed promising results in the range of 6.33-7.36 in the temperature range of 70-150 °C, respectively. The extraction with the deionized water showed that approximately 90% of the substances in the extracts obtained with the organic solvents by sequential extraction are possible to obtain as deionized water extracts.

Depolymerization and Demethylation of Kraft Lignin in Molten Salt Hydrate and Applications as an Antioxidant and Metal Ion Scavenger

To improve the reactivity and enrich the functionality of lignin for valorization, kraft lignin was depolymerized and demethylated via cleaving aryl and alkyl ether bonds in acidic lithium bromide trihydrate (∼60% LiBr aqueous solution). It was found that the cleavage of the ether bonds followed the order of β-O-4 ether > aryl alkyl ether in phenylcoumaran > dialkyl ether in resinol > methoxyl (MeO). The depolymerization via β-O-4 cleavage occurred under mild conditions (e.g., <0.5 M HCl at 110 °C), while sufficient demethylation of the lignin needed harsher conditions (>1.5 M HCl). Both depolymerization and demethylation generated new aromatic hydroxyl (ArOH). With 2.4 M HCl, MeO content dropped from 4.85 to 0.95 mmol/g lignin, and ArOH content increased from 2.78 to 5.09 mmol/g lignin. The depolymerized and demethylated kraft lignin showed excellent antioxidant activity and Cr(VI)-scavenging capacity, compared with original kraft lignin and tannins.

Understanding the relationship between the structural properties of lignin and their biological activities

Due to the antioxidant properties of lignin, it has been demonstrated as an active substance for treating oxidation-related and inflammatory diseases. However, how the structural properties of lignin affect its biological activities is still ambiguous. In this study, Kraft lignin from wheat straw (KL-A) was used as the raw material to fractionate into three fractions (e.g., KL-B, KL-C, and KL-D) with different molecular weight by ultrafiltration, which possessed different physicochemical properties. The biocompatibility, in vivo and in vitro scavenging abilities for reactive oxygen species (ROS), and anti-apoptotic abilities of the lignin fractions were evaluated using SW1353 chondrocyte cell lines and were quantitatively fitted to their physicochemical properties. The results showed that lignin fractions with lower molecular weights, lower G/S ratios, and higher non-condensed phenolic OH contents endowed lignin with stronger ROS scavenging ability in vivo and in vitro, but was accompanied by increased cytotoxicity to cells. The half maximal inhibitory concentration (IC50) of KL-A, KL-B, KL-C, and KL-D were separately determined as 44.02, 33.43, 32.41, and 18.40 μg/mL. Furthermore, KL-D, with the lowest molecular weight and highest number of functional groups, showed the best antioxidant ability, while it performed poorly in inhibiting cellular apoptosis of chondrocytes. Compared to KL-D, KL-C with inverse structural properties, performed better in anti-apoptosis of SW1353 cells, which is the optimum lignin as promising active substances to be applied in the treatment of osteoarthritis in biomedical engineering.

Recent Advances in Cellulose Nanofibers Preparation through Energy-Efficient Approaches: A Review

Cellulose nanofibers (CNFs) and their applications have recently gained significant attention due to the attractive and unique combination of their properties including excellent mechanical properties, surface chemistry, biocompatibility, and most importantly, their abundance from sustainable and renewable resources. Although there are some commercial production plants, mostly in developed countries, the optimum CNF production is still restricted due to the expensive initial investment, high mechanical energy demand, and high relevant production cost. This paper discusses the development of the current trend and most applied methods to introduce energy-efficient approaches for the preparation of CNFs. The production of cost-effective CNFs represents a critical step for introducing bio-based materials to industrial markets and provides a platform for the development of novel high value applications. The key factor remains within the process and feedstock optimization of the production conditions to achieve high yields and quality with consistent production aimed at cost effective CNFs from different feedstock.

Injectable Lignin-co-Gelatin Cryogels with Antioxidant and Antibacterial Properties for Biomedical Applications

For several biomedical applications, it is essential to develop novel bioactive materials. Such biomaterials could potentially improve wound healing, prevent infections, or be used in immunoengineering. For example, bioactive materials that reduce oxidative stress without relying on antibiotics and other drugs could be beneficial. Hydrogel-based biomaterials, especially those derived from natural polymers, have been regarded as one of the most promising scaffolds for biomedical research. These multifunctional scaffolds can exhibit high water adsorption capacity, biocompatibility, and biomechanical properties that can match native tissues. Cryogels are a special type of hydrogels in which polymers are cross-linked around ice crystals. As a result, cryogels exhibit unique physical features, including a macroporous and interconnected network, flexibility, shape-memory properties, and syringe injectability. Herein, we developed a multifunctional, i.e., antibacterial, antioxidant, and injectable cryogel by combining lignin with gelatin. The cryogel with 0.2% lignin showed a compressive modulus of 25 kPa and a compressive stress of 140 kPa at 80% strain, which is, respectively, 1.8 and 7 times higher than those of the pure gelatin cryogels. Meanwhile, such a cryogel formulation could completely recover its shape after compression up to 90% and was needle-injectable. Additionally, the lignin-co-gelatin cryogel with 0.1-0.2 lignin showed 8-10 mm of inhibition zone against the most common surgical site infection-associated pathogenic bacteria. Furthermore, lignin-co-gelatin cryogel was found to scavenge free radicals and have good cytocompatibility, and the cryogels with up to 0.2% lignin minimally activate naïve mouse bone marrow-derived dendritic cells. Overall, the current approach shows great promise for the design of bioresource-based multifunctional cryogels for a wide range of biomedical applications.

Lignin Resists High-Intensity Electron Beam Irradiation

The electron beam irradiation (EBI) of native lignin has received little attention. Thus, its potential use in lignin-based biorefineries is not fully understood. EBI was applied to selected lignin samples and the structural and chemical changes were analyzed, revealing the suitability, limitations, and potential purpose of EBI in wood biorefineries. Isolated milled wood, kraft, and sulfite lignin from beech and eucalyptus were subjected to up to 200 kGy of irradiation. The analysis included gel permeation chromatography for molar masses, heteronuclear single quantum coherence (HSQC)- and ³¹P NMR and headspace gas chromatography-mass spectrometry for functional groups, and thermogravimetric analysis for thermal stability. Most samples resisted irradiation. Subtle changes occurred in the molecular weight distribution and thermal stability of milled wood lignin. EBI was found to be a suitable pretreatment method for woody biomass if the avoidance of lignin condensation and chemical modification is a high priority.

Fractionation, characterization, and economic evaluation of alkali lignin from saw industry waste

The present work was focused on the investigation of lignin isolation from saw industry biomass (sawdust (SD)) using alkali solution, and to perform economic analysis for 2000 kg/batch hypothetical plant using techno-economic analysis. The isolated lignin was fractionated using organic solvent to obtain purified lignin. FTIR and ¹H NMR analysis were performed to examine the structural characteristics of lignin. Lignin nanoparticles (LN) showed higher total phenolic content (TPC) (244.1 ± 2 µg of GAE per mg) and antioxidant activity (63.2 ± 1.7%) compared with crude lignin (CL), ethanol fractionated lignin (EL), and acetone fractionated lignin (AL). SuperPro designer was exposed to design and simulated 2000 kg/batch of sawdust fractionation process. The techno-economic analysis estimated that the lignin production cost is about $ 487,000 per year, and the annual revenue could be $ 1,850,000 per year. The techno-economic analysis and sensitivity analysis could be useful for the industrial level sawdust fractionation process.

Lignin/Carbohydrate Complex Isolated from Posidonia oceanica Sea Balls (Egagropili): Characterization and Antioxidant Reinforcement of Protein-Based Films

A lignin fraction (LF) was extracted from the sea balls of Posidonia oceanica (egagropili) and extensively dialyzed and characterized by FT-IR and NMR analyses. LF resulted water soluble and exhibited a brownish-to-black color with the highest absorbance in the range of 250-400 nm, attributed to the chromophore functional groups present in the phenylpropane-based polymer. LF high-performance size exclusion chromatography analysis showed a highly represented (98.77%) species of 34.75 kDa molecular weight with a polydispersity index of 1.10 and an intrinsic viscosity of 0.15. Quantitative analysis of carbohydrates indicated that they represented 28.3% of the dry weight of the untreated egagropili fibers and 72.5% of that of LF. In particular, eight different monosaccharides were detected (fucose, arabinose, rhamnose, galactose, glucose, xylose, glucosamine and glucuronic acid), glucuronic acid (46.6%) and rhamnose (29.6%) being the most present monosaccharides in the LF. Almost all the phenol content of LF (113.85 ± 5.87 mg gallic acid eq/g of extract) was water soluble, whereas around 22% of it consisted of flavonoids and only 10% of the flavonoids consisted of anthocyanins. Therefore, LF isolated from egagropili lignocellulosic material could be defined as a water-soluble lignin/carbohydrate complex (LCC) formed by a phenol polymeric chain covalently bound to hemicellulose fragments. LCC exhibited a remarkable antioxidant activity that remained quite stable during 6 months and could be easily incorporated into a protein-based film and released from the latter overtime. These findings suggest egagropili LCC as a suitable candidate as an antioxidant additive for the reinforcement of packaging of foods with high susceptibility to be deteriorated in aerobic conditions.

Partial exchange of ozone by electron beam irradiation shows better viscosity control and less oxidation in cellulose upgrade scenarios

Electron beam irradiation (EBI) is an alternative treatment for intrinsic viscosity (IV) control in cellulose pulps, but has never been integrated in full bleaching sequences for comparison to conventional methods. Both eucalyptus kraft (EK) paper pulp and beech sulfite (BS) dissolving pulp were subjected to totally chlorine free (TCF) bleaching sequences comprising either EBI, ozone, or both for IV control. Additionally, effects of EBI on hexenuronic acid (HexA) and xylan were investigated. IV was adjusted to 450-500 mL g^-1 and properties including carbonyl content, kappa, brightness, alkali-resistance and sugar composition were compared. Pulps produced with EBI had a higher alkali-resistance, uniformity and less cellulose oxidation. However, the degree of bleaching (DoB) was low without the use of ozone. HexA content in a birch pulp was halved by EBI. Isolated xylans were more resistant to irradiation than cellulose with little decrease of molar masses and moderate oxidation.

Effect of organosolv extraction on the structure and antioxidant activity of eucalyptus kraft lignin

In this study, three lignin fractions F1, F2, and F3 were obtained from eucalyptus kraft lignin (EKL) by solvent extraction with ethyl acetate, acetone, and acetone/water. The antioxidant activity of these lignin fractions were measured and evaluated by using the DPPH radical scavenging activity, ABTS radical cation scavenging activity and ferric reducing antioxidant power analysis. These lignin fractions were also characterized by applying Gel permeation chromatography, Fourier transform infrared, ³¹P NMR and 2D HSQC NMR techniques. The three different lignin fractions had rather different average molecular sizes, as well as different phenolic and methoxy functional contents. The ethyl acetate fraction (F1) with the lowest average molecular weight (2342 g/mol) and the highest phenolic hydroxyl content (4.2457 mmol/g) and methoxy groups (6.2714 mmol/g) showed high homogeneity and the highest antioxidant activity. Its DPPH scavenging activity, ABTS⁺ scavenging activity, and ferric reducing the antioxidant power were 68.67%, 75.57%, and 91.89 μmol/g, respectively. Moreover, the antioxidant activity of F1 and F2 was found to be higher than that of butylated hydroxytoluene. Therefore, solvent extraction was shown to be an effective way to separate lignin fractions with high homogeneity, high antioxidant activity, which could lead to application of lignin with higher value.

Attenuating Fibrotic Markers of Patient-Derived Dermal Fibroblasts by Thiolated Lignin Composites

We report the use of phenolic functional groups of lignosulfonate to impart antioxidant properties and the cell binding domains of gelatin to enhance cell adhesion for poly(ethylene glycol) (PEG)-based scaffolds. Chemoselective thiol-ene chemistry was utilized to form composites with thiolated lignosulfonate (TLS) and methacrylated fish gelatin (fGelMA). Antioxidant properties of TLS were not altered after thiolation and the levels of antioxidation were comparable to those of L-ascorbic acid. PEG-fGelMA-TLS composites significantly reduced the difference in COL1A1, ACTA2, TGFB1, and HIF1A genes between high-scarring and low-scarring hdFBs, providing the potential utility of TLS to attenuate fibrotic responses.

Enhancement of the antioxidant abilities of lignin and lignin-carbohydrate complex from wheat straw by moderate depolymerization via LiCl/DMSO solvent catalysis

A facile and environmentally-friendly strategy for increasing antioxidant activity is a crucial issue for value-added lignin and lignin-carbohydrate complex (LCC) as alternative antioxidants. However, the antioxidant activities of lignin and LCC by the traditional solid-liquid extraction (SLE) methods were restricted by the relatively lower solubility induced from high molecular weight (Mw), and the less functional groups including, phenolic hydroxyl and carboxyl. To improve the antioxidantion of lignin and LCC, lithium chloride/dimethyl sulfoxide (LiCl/DMSO) solvent fractionation (LDSF) was conducted to increase the functional groups and reduce Mw, in which LiCl/DMSO acted triple roles as solvent, acid, and metal chloride catalyst for the depolymerization reaction synchronously. The β-O-4' linkages were cleaved to release the phenolic hydroxyl, resulting in decreasing Mw; the hydroxyl of the side-chain of lignin was oxidized into carboxyl. Thus, the lignin (LD-RL) and LCC (LD-LCC) samples from LDSF had a higher syringyl (S)/guaiacyl (G) ratio, phenolic hydroxyl, and carboxyl contents, but less Mw than control groups from SLE. Consequently, they presented more excellent scavenging rates toward DPPH and ABTS radicals, up to 90%. This work provided panoramic perspectives and basics of the green and convenient approach to isolate and modify lignin and LCC for great antioxidantion with LDSF.

Review of 10,11-Dehydrocurvularin: Synthesis, Structural Diversity, Bioactivities and Mechanisms

10,11-Dehydrocurvularin is a natural benzenediol lactone (BDL) with a 12-membered macrolide fused to resorcinol ring produced as secondary metabolite by many fungi. In this review, we summarized literatures regarding the biosynthesis, chemical synthesis, biological activities and assumed work mechanisms of 10,11-dehydrocurvularin, which presented potential for agricultural and pharmaceutical uses.