Progress on nanostructured electrochemical sensors and their recognition elements for detection of mycotoxins: A review

Use of molecular imprinted polymers as sensitive/selective luminescent sensing probes for pesticides/herbicides in water and food samples

As non-biological molecules, molecular imprinted polymers (MIPs) can be made as antibody mimics for the development of luminescence sensors for various targets. The combination of MIPs with nanomaterials is further recognized as a useful option to improve the sensitivity of luminescence sensors. In this work, the recent progresses made in the fabrication of fluorescence, phosphorescence, chemiluminescence, and electrochemiluminescence sensors based on such combination have been reviewed with emphasis on the detection of pesticides/herbicides. Accordingly, the materials that are most feasible for the detection of such targets are recommended based on the MIP technologies.

Gold-based nanostructured platforms for oxytetracycline detection from milk by a "signal-on" aptasensing approach

Several gold platforms of different morphologies were investigated in the elaboration of a new aptasensor for oxytetracycline. Au-nanostructures were electrochemically synthesized from solutions of different concentrations of HAuCl₄ in different media by chronoamperometry, multipulse amperometry, and chronopotentiometry, respectively at carbon-based screen-printed electrodes (C-SPE). The nano-/micro-scale morphologies of the patterned surfaces and elemental composition were examined by scanning electron microscopy, atomic force microscopy, and X-ray photoelectron spectroscopy, respectively. The electrochemical properties of the obtained gold nanostructured platforms (AuNSs|C-SPE) were investigated to achieve optimal aptamer coverage. The results showed that the aptasensor developed using the platform with thistle-like AuNSs exhibited the highest conductivity in terms of ferrocene signal and the largest effective area. Under optimal conditions, a linear range from 5.0 × 10^-8 M to 1.2 × 10^-6 M, with a limit of detection (LOD) of 8.7 × 10^-9 M OXT were obtained, which is about 20 times lower than the EU regulations for OXT residues in milk. The electrochemical aptasensor was able to discriminate other antibacterial agents, such as amoxicillin, ampicillin, gentamicin, tetracycline, and vancomycin and was successfully applied in milk samples. This "signal-on" aptasensing approach provides a simple and cost-effective disposable sensor that could be easily applied for the on-site determination of antibiotics.

Detection and electrocatalytic mechanism of zearalenone using nanohybrid sensor based on copper-based metal-organic framework/magnetic Fe3O4-graphene oxide modified electrode

A novel and simple strategy was proposed for the determination of ZEA in breakfast cereal, maize powder and rice flour using an electrochemical nanohybrid sensor based on copper-based metal-organic framework (Cu-MOF)/magnetic Fe₃O₄-graphene oxide (Fe₃O₄-GO) modified electrode fabricated by the layer-by-layer assembled technique. The synthesized Cu-MOF with high porosity favorably improved the effective surface area and the analytical performance of nanohybrid sensing electrode. The crafted sensor has large surface area, high electron transfer, and satisfactory efficiency. ZEA was electrochemically detected in a wide linear range from 159.2 to 2865.2 ng mL^-1 with LOD of 23.14 ng mL^-1 under the optimal conditions. Moreover, the electrocatalytic mechanism of ZEA oxidation was proposed by density functional theory (DFT). A favorable energetic interaction was presented when Cu-MOF adsorbed on Fe₃O₄-GO, and a small new band appeared on the Fermi level energy (E_f) that facilitated the electron transfer between bands.

Nanomaterial-based biosensor developing as a route toward in vitro diagnosis of early ovarian cancer

The grand challenges of ovarian cancer early diagnosis have led to an alarmingly high mortality rate from ovarian cancer (OC) in the past half century. In vitro diagnosis (IVD) has great potential in the early diagnosis of OC through non-invasive and dynamic analysis of biomarkers. However, common IVDs often fail to provide reliable test results due to lack of sensitivity, specificity, and convenience. In recent years, the discovery of new biomarkers and the progress of nanomaterials can solve the shortcomings of traditional IVD for early OC. These emerging biosensors based on nanomaterials offer great improvements in convenience, speed, selectivity, and sensitivity of IVD. In this review, we firstly systematically summarized the limits of commercial IVD biosensors of OC and the latest discovery of new biomarkers for OC. The representative optimization strategies for six potential ovarian cancer biomarkers are systematically discussed with emphasis on nanomaterial selection and the design of detection principles. Then, various strategies adopted by emerging biosensors based on nanomaterials are also introduced in detail, including optical, electrochemical, microfluidic, and surface plasmon sensors. Finally, current challenges of early OC IVD are proposed, and future research directions on this promising field are also discussed.

•

Failure to diagnose OC early will lead to high mortality.

•

The detection of OC-related biomarkers by IVD method will achieve early diagnosis of OC.

•

The development of nanomaterials-based biosensors is expected to enhance efficiency of detection.

•

Strategies and progress for nanomaterials-based biosensors are systematically reviewed.

Mycotoxins detection: view in the lens of molecularly imprinted polymer and nanoparticles

Molecularly imprinted polymers (MIPs) are tailor-made functional composites which selectively recognize and bind the target molecule of interest. MIP composites are products of the massively cross-linked polymer matrices, generated via polymerization, with bio-inspired recognition cavities that are morphologically similar in size, shape and spatial patterns to the target conformation. These features have enabled researchers to expand the field of molecular recognition, more specifically for target with peculiar requirements. Nevertheless, MIPs alone are characterized with weak sensitivity. Besides, nanoparticles (NPs) are remarkably sensitive but also suffer from poor selectivity. Intriguingly, the combination of the two results in a highly sensitive and selective MIP composite. For instance, the conjugation of different functional NPs with MIPs can generate new flexible target capture tools, either a dynamic sensor or a novel drug delivery system. In this regard, although the technology is considered an established and feasible approach, it is still perceived as a burgeoning technology for various fields, which makes it unceasingly worthy reviewing. Therefore, in this review, we attempt to give an update on various custom-made biosensors based on MIPs in combination with various NPs for the detection of mycotoxins, the toxic secondary metabolites of fungi. We first summarize the classification, prevalence, and toxicological characteristics of common mycotoxins. Next, we provide an overview of MIP composites and their characterization, and then segment the role of NPs with respect to common types of MIP-based sensors. At last, conclusions and outlook are discussed.

No-wash point-of-care biosensing assay for rapid and sensitive detection of aflatoxin B1

In many cases of in-situ or point-of-care testing (POCT), the single pursuit of good detection performance cannot meet the testing requirements, and thus no-wash testing has become one of the most effective methods to develop sustainable biosensing assay, providing more convenient operation procedures and shorting the detection time. Herein, a disposable POC biosensing assay was prepared based on the RGB color detector software on the smartphone and the peroxide-like activity of gold nanoparticles (Au NPs) for aflatoxin B1 (AFB1) sensitive detection. Using syringe filters for a simple physical separation procedure can easily realize washing free detection, which is superior to most biosensing assays with cumbersome detection procedures. The syringe filters with 200 nm pore diameter could only pass through small Au NPs (30 nm) while the large-sized SiO₂ nanoparticles (300 nm) was blocked on the membrane. In this work, Au NPs utilized their inherent peroxidase-like activity to catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) by H₂O₂ to ox-TMB under acidic conditions, which results in blue color in aqueous solution. The color change due to different antigen concentrations was quantitatively determined by measuring the color intensity with a smartphone and the RGB color detector. By measuring the color intensity, it was known that the linear concentration range of the biosensing assay was 100 fg mL^-1 to 50 ng mL^-1, and the detection limit of AFB1 was 33 fg mL^-1 (S/N = 3). Additionally, the designed biosensing assay exhibited excellent selectivity, storage stability and reproducibility. More importantly, the innovation of detecting and analyzing technology is the outstanding advantage of the biosensing assay, providing a more flexible and convenient strategy for some other small molecule analysis.

Development of Fe3O4@Au nanoparticles coupled to Au@Ag core-shell nanoparticles for the sensitive detection of zearalenone

Agricultural products are frequently contaminated by mycotoxins; thus, the accurate detection of mycotoxins is important to food safety. Zearalenone (ZEN), a mycotoxin produced by certain Fusarium and Gibberella species, is a group III carcinogen. We developed a universal surface-enhanced Raman scattering (SERS) aptasensor for the detection of ZEN. The SERS biosensor consists of two functional nanomaterials: sulfhydryl (SH)-ZEN aptamer complementary DNA-modified Fe₃O₄@Au was used as a capture probe and SH-ZEN aptamer-modified Au@Ag core-shell nanoparticles served as reporter probes. In the absence of ZEN, the highest Raman signal was obtained owing to the SERS effects of Fe₃O₄@Au and Au@Ag core-shell nanoparticles. Conversely, the addition of ZEN triggered the release of Au@Ag core-shell nanoparticles from Fe₃O₄@Au, leading to a decrease in SERS intensity after magnetic separation. Hybridization of the ZEN aptamer and its complementary strand generated a strong SERS signal from the reporter probe. Moreover, preferential binding of the ZEN aptamer to ZEN was observed. The signal intensity in SERS decreased linearly when the capture probes released the reporter. For ZEN detection, a linear range from 0.005 to 500 ng mL^-1, with an R² of 0.9981, was obtained. The detection limit was 0.001 ng mL^-1. The SERS aptasensor showed excellent performance for analytical applications with real-world samples (beer and wine). This study presents a new model for the detection of mycotoxins based on simple changes in aptamers.

An Electrochemical Ti3C2Tx Aptasensor for Sensitive and Label-Free Detection of Marine Biological Toxins

Saxitoxin (STX) belongs to the family of marine biological toxins, which are major contaminants in seafood. The reference methods for STX detection are mouse bioassay and chromatographic analysis, which are time-consuming, high costs, and requirement of sophisticated operation. Therefore, the development of alternative methods for STX analysis is urgent. Electrochemical analysis is a fast, low-cost, and sensitive method for biomolecules analysis. Thus, in this study, an electrolyte-insulator-semiconductor (EIS) sensor based on aptamer-modified two-dimensional layered Ti3C2Tx nanosheets was developed for STX detection. The high surface area and rich functional groups of MXene benefited the modification of aptamer, which had specific interactions with STX. Capacitance-voltage (C-V) and constant-capacitance (ConCap) measurement results indicated that the aptasensor was able to detect STX with high sensitivity and good specificity. The detection range was 1.0 nM to 200 nM and detection limit was as low as 0.03 nM. Moreover, the aptasensor was found to have a good selectivity and two-week stability. The mussel tissue extraction test suggested the potential application of this biosensor in detecting STX in real samples. This method provides a convenient approach for low-cost, rapid, and label-free detection of marine biological toxins.

Biosensors for Deoxynivalenol and Zearalenone Determination in Feed Quality Control

Mycotoxin contamination of cereals used for feed can cause intoxication, especially in farm animals; therefore, efficient analytical tools for the qualitative and quantitative analysis of toxic fungal metabolites in feed are required. Current trends in food/feed analysis are focusing on the application of biosensor technologies that offer fast and highly selective and sensitive detection with minimal sample treatment and reagents required. The article presents an overview of the recent progress of the development of biosensors for deoxynivalenol and zearalenone determination in cereals and feed. Novel biosensitive materials and highly sensitive detection methods applied for the sensors and the application of these sensors to food/feed products, the limit, and the time of detection are discussed.

Recent Advances in Conventional Methods and Electrochemical Aptasensors for Mycotoxin Detection

The presence of mycotoxins in foodstuffs and feedstuffs is a serious concern for human health. The detection of mycotoxins is therefore necessary as a preventive action to avoid the harmful contamination of foodstuffs and animal feed. In comparison with the considerable expense of treating contaminated foodstuffs, early detection is a cost-effective way to ensure food safety. The high affinity of bio-recognition molecules to mycotoxins has led to the development of affinity columns for sample pre-treatment and the development of biosensors for the quantitative analysis of mycotoxins. Aptamers are a very attractive class of biological receptors that are currently in great demand for the development of new biosensors. In this review, the improvement in the materials and methodology, and the working principles and performance of both conventional and recently developed methods are discussed. The key features and applications of the fundamental recognition elements, such as antibodies and aptamers are addressed. Recent advances in aptasensors that are based on different electrochemical (EC) transducers are reviewed in detail, especially from the perspective of the diagnostic mechanism; in addition, a brief introduction of some commercially available mycotoxin detection kits is provided.

The usage of composite nanomaterials in biomedical engineering applications

Nanotechnology is still developing over the decades and it is commonly used in biomedical applications with the design of nanomaterials due to the several purposes. With the investigation of materials on the molecular level has increased the develop composite nanomaterials with exceptional properties using in different applications and industries. The application of these composite nanomaterials is widely used in the fields of textile, chemical, energy, defense industry, electronics, and biomedical engineering which is growing and developing on human health. Development of biosensors for the diagnosis of diseases, drug targeting and controlled release applications, medical implants and imaging techniques are the research topics of nanobiotechnology. In this review, overview of the development of nanotechnology and applications which is use of composite nanomaterials in biomedical engineering is provided.

Emerging electrochemical sensing and biosensing approaches for detection of Fumonisins in food samples

Fumonisins (FBs) can be found extensively in feedstuffs, foodstuffs, and crops. The consumption of the fumonisin-contaminated corn can result in esophageal cancer. In addition, the secondary metabolites of fungi termed mycotoxins may have some adverse effects on animals and humans such as estrogenicity, immunotoxicity, teratogenicity, mutagenicity, and carcinogenicity. Hence, developing sensitivity techniques for mycotoxins determination is of great importance. This paper reports the latest developments of nanomaterial-based electrochemical biosensing, apta-sensing, sensing, and immunosensing analyses to detect fumonisins. A concise study of the occurrence, legislations, toxicity, and distribution of FBs in levels monitoring was done. The techniques, different detection matrices, and approaches to highly selective and sensitive sensing methods were reviewed. The review also summarizes the salient features and the necessity of biosensing assessments in FBs detection, and diverse immobilization techniques. Furthermore, this review defined the performance of various electrochemical sensors using different detection elements couples with nanomaterials fabricated applying different detection elements coupled with nanomaterials (metal oxide nanoparticles (NPs), metal NPs, CNT, and graphene), the factors limiting progress, and the upcoming tasks in successful aptasensor fabrication with the functionalized nanomaterials.

Temperature abetted synthesis of novel magnesium stannate nanoparticles assisted for nanomolar level detection of hazardous flavonoid in biological samples

Fabrication of temperature-influenced nanoparticles over the superficial region of glassy carbon electrode (GCE) stimulates the electrocatalytic activity owing to their morphology, defective sites, and higher active surface area, etc. In this regard, we have fabricated annealed magnesium stannate nanoparticles (Mg₂SnO₄ NPs) on GCE for nanomolar level detection of hazardous flavoring and pharmaceutical compound Rutin (RT). To analyze the impact of temperature, we have compared annealed Mg₂SnO₄ NPs with unannealed magnesium stannate hydrate (MgSnO₃·3H₂O) particles. The physicochemical properties of synthesized materials were characterized with different microscopic and spectroscopic techniques. From these studies, annealed Mg₂SnO₄ NPs formed purely without any flith and existence of water molecules as compared to unannealed MgSnO₃·3H₂O. Moreover as fabricated, Mg₂SnO₄ NPs/GCE outcomes with higher redox behavior compared to other electrodes in presence of RT at optimized working buffer (pH = 7.0). Interestingly, the electrode successfully established a dual wider linear response (0.062-34.8 & 34.8-346.8 µM) with a nanomolar detection limit (1 nM) and higher sensitivity. The practicability analysis of the proposed sensor also affords excellent selectivity, reproducibility, repeatability, reversibility, and storage stability. Furthermore, the real sample analysis was carried out in blood and orange samples fallout with better recovery results.

Electrochemical diagnostics of infectious viral diseases: Trends and challenges

Infectious diseases caused by viruses can elevate up to undesired pandemic conditions affecting the global population and normal life function. These in turn impact the established world economy, create jobless situations, physical, mental, emotional stress, and challenge the human survival. Therefore, timely detection, treatment, isolation and prevention of spreading the pandemic infectious diseases not beyond the originated town is critical to avoid global impairment of life (e.g., Corona virus disease - 2019, COVID-19). The objective of this review article is to emphasize the recent advancements in the electrochemical diagnostics of twelve life-threatening viruses namely - COVID-19, Middle east respiratory syndrome (MERS), Severe acute respiratory syndrome (SARS), Influenza, Hepatitis, Human immunodeficiency virus (HIV), Human papilloma virus (HPV), Zika virus, Herpes simplex virus, Chikungunya, Dengue, and Rotavirus. This review describes the design, principle, underlying rationale, receptor, and mechanistic aspects of sensor systems reported for such viruses. Electrochemical sensor systems which comprised either antibody or aptamers or direct/mediated electron transfer in the recognition matrix were explicitly segregated into separate sub-sections for critical comparison. This review emphasizes the current challenges involved in translating laboratory research to real-world device applications, future prospects and commercialization aspects of electrochemical diagnostic devices for virus detection. The background and overall progress provided in this review are expected to be insightful to the researchers in sensor field and facilitate the design and fabrication of electrochemical sensors for life-threatening viruses with broader applicability to any desired pathogens.

Development of Two-Dimensional Nanomaterials Based Electrochemical Biosensors on Enhancing the Analysis of Food Toxicants

In recent times, food safety has become a topic of debate as the foodborne diseases triggered by chemical and biological contaminants affect human health and the food industry's profits. Though conventional analytical instrumentation-based food sensors are available, the consumers did not appreciate them because of the drawbacks of complexity, greater number of analysis steps, expensive enzymes, and lack of portability. Hence, designing easy-to-use tests for the rapid analysis of food contaminants has become essential in the food industry. Under this context, electrochemical biosensors have received attention among researchers as they bear the advantages of operational simplicity, portability, stability, easy miniaturization, and low cost. Two-dimensional (2D) nanomaterials have a larger surface area to volume compared to other dimensional nanomaterials. Hence, researchers nowadays are inclined to develop 2D nanomaterials-based electrochemical biosensors to significantly improve the sensor's sensitivity, selectivity, and reproducibility while measuring the food toxicants. In the present review, we compile the contribution of 2D nanomaterials in electrochemical biosensors to test the food toxicants and discuss the future directions in the field. Further, we describe the types of food toxicity, methodologies quantifying food analytes, how the electrochemical food sensor works, and the general biomedical properties of 2D nanomaterials.

An enhanced enzyme-linked aptamer assay for the detection of zearalenone based on gold nanoparticles

A novel enhanced enzyme-linked aptamer assay (ELAA) for the detection of zearalenone (ZEN) was developed based on gold nanoparticles (AuNPs) modified with an aptamer and horseradish peroxidase (HRP). In this assay, the aptamer was used as a recognition probe to competitively bind with coated ZEN-BSA on a microplate and ZEN in samples. AuNPs with high surface areas were used as a carrier to immobilize more amounts of HRP labelled aptamer probe, which can amplify the colorimetric signal by enhancing catalysis of the HRP enzyme compared with the traditional enzyme-linked method. Under the optimal conditions, the enhanced ELAA presented a good linearity in the range of 0.1-160 ng mL-1 and the limit of detection was 0.08 ng mL-1 for ZEN detection. In addition, the enhanced ELAA had no cross reactivity with other mycotoxins and showed good recoveries in spiked corn oil samples. These results indicated that the AuNP enhanced ELAA provided a new approach with simplicity, and high sensitivity and specificity for the detection of ZEN in foodstuff.

Patulin and Trichothecene: characteristics, occurrence, toxic effects and detection capabilities via clinical, analytical and nanostructured electrochemical sensing/biosensing assays in foodstuffs

Patulin and Trichothecene as the main groups of mycotoxins in significant quantities can cause health risks from allergic reactions to death on both humans and animals. Accordingly, rapid and highly sensitive determination of these toxics agents is of great importance. This review starts with a comprehensive outlook regarding the characteristics, occurrence and toxic effects of Patulin and Trichothecene. In the following, numerous clinical and analytical approaches have been extensively discussed. The main emphasis of this review is placed on the utilization of novel nanomaterial based electrochemical sensing/biosensing tools for highly sensitive determination of Patulin and Trichothecene. Furthermore, a detailed and comprehensive comparison has been performed between clinical, analytical and sensing methods. Subsequently, the nanomaterial based electrochemical sensing platforms have been approved as reliable tools for on-site analysis of Patulin and Trichothecene in food processing and manufacturing industries. Different nanomaterials in improving the performance of detecting assays were investigated and have various benefits toward clinical and analytical methods. This paper would address the limitations in the current developments as well as the future challenges involved in the successful construction of sensing approaches with the functionalized nanomaterials and also allow exploring into core-research works regarding this area.

Novel impedimetric sensing strategy for detecting ochratoxin A based on NH2-MIL-101(Fe) metal-organic framework doped with cobalt phthalocyanine nanoparticles

Iron-based metal-organic framework, NH₂-MIL-101(Fe), was doped with different dosages of cobalt phthalocyanine nanoparticles (CoPc) to synthesize a series of NH₂-MIL-101(Fe)@CoPc nanocomposites. The NH₂-MIL-101(Fe)@CoPc nanocomposites were then employed to construct novel impedimetric aptasensors for the detection of ochratoxin A (OTA). Combining the intrinsic advantages of NH₂-MIL-101(Fe) (highly porous structure and excellently electrochemical activity) and CoPc (good physiochemical stability and strong bioaffinity), the NH₂-MIL-101(Fe)@CoPc nanocomposites show promising properties, which are beneficial for immobilizing OTA-targeted aptamer strands. Amongst, the developed impedimetric aptasensor based on NH₂-MIL-101(Fe)@CoPc_6:1, prepared using the mass ratio of NH₂-MIL-101(Fe):CoPc of 6:1, exhibits the best amplified electrochemical signal and highest sensitivity for detecting OTA. The detection limitation is 0.063 fg·mL^-1 within the OTA concentration of 0.0001-100 pg·mL^-1, accompanying with high selectivity, good reproducibility and stability, acceptable regenerability, and wide applicability in diverse real samples. Consequently, the proposed sensing strategy can be applied for detecting OTA to cope with food safety.

Exposure Assessment of Multiple Mycotoxins and Cumulative Health Risk Assessment: A Biomonitoring-Based Study in the Yangtze River Delta, China

The extensive exposure to multiple mycotoxins has been demonstrated in many countries; however, realistic assessments of the risks related to cumulative exposure are limited. This biomonitoring study was conducted to investigate exposure to 23 mycotoxins/metabolites and their determinants in 227 adults (aged 20-88 years) in the Yangtze River Delta, China. Eight mycotoxins were detected in 110 urine samples, and multiple mycotoxins co-occurred in 51/227 (22.47%) of urine samples, with deoxynivalenol (DON), fumonisin B1 (FB1), and zearalenone (ZEN) being the most frequently occurring. For single mycotoxin risk assessment, FB1, ZEN, aflatoxin B1 (AFB1), and ochratoxin A (OTA) all showed potential adverse effects. However, for the 12 samples containing DON and ZEN, in which none had a hazard risk, the combination of both mycotoxins in two samples was considered to pose potential endocrine disrupting risks to humans by hazard index (HI) method. The combined margin of exposure (MOET) for AFB1 and FB1 could constitute a potential health concern, and AFB1 was the main contributor. Our approach provides a blueprint for evaluating the cumulative risks related to different types of mycotoxins and opens a new horizon for the accurate interpretation of epidemiological health outcomes related to multi-mycotoxin exposure.

Recent progress in mycotoxins detection based on surface-enhanced Raman spectroscopy

Mycotoxins are toxic compounds naturally produced by certain types of fungi. The contamination of mycotoxins can occur on numerous foodstuffs, including cereals, nuts, fruits, and spices, and pose a major threat to humans and animals by causing acute and chronic toxic effects. In this regard, reliable techniques for accurate and sensitive detection of mycotoxins in agricultural products and food samples are urgently needed. As an advanced analytical tool, surface-enhanced Raman spectroscopy (SERS), presents several major advantages, such as ultrahigh sensitivity, rapid detection, fingerprint-type information, and miniaturized equipment. Benefiting from these merits, rapid growth has been observed under the topic of SERS-based mycotoxin detection. This review provides a comprehensive overview of the recent achievements in this area. The progress of SERS-based label-free detection, aptasensor, and immunosensor, as well as SERS combined with other techniques, has been summarized, and in-depth discussion of the remaining challenges has been provided, in order to inspire future development of translating the techniques invented in scientific laboratories into easy-to-operate analytic platforms for rapid detection of mycotoxins.

Advances in nanomaterial-based electrochemical biosensors for the detection of microbial toxins, pathogenic bacteria in food matrices

There is a growing demand to protect food products against the hazard of microbes and their toxins. To satisfy such goals, it is important to develop highly sensitive, reliable, sophisticated, rapid, and cost-effective sensing techniques such as electrochemical sensors/biosensors. Although diverse forms of nanomaterials (NMs)-based electrochemical sensing methods have been introduced in markets, the reliability of commercial products is yet insufficient to meet the practical goal. In this review, we focused on: 1) sources of pathogenic microbes and their toxins; 2) possible routes of their entrainment in food, and 3) current development of NM-based biosensors to realize real-time detection of the target analytes. At last, future prospects and challenges in this research field are discussed.

A review on graphene-based electrochemical sensor for mycotoxins detection

This work focuses on the study of nanomaterial-based sensors for mycotoxins detection. Due to their adverse effects on humans and animals, mycotoxins are heavily regulated, and the foodstuff and feed stocks with a high probability of being contaminated are often analyzed. In this context, the recent developments in graphene-based electrochemical sensors for mycotoxins detection were examined. The mycotoxins' toxicity implications on their detection and the development of diverse recognition elements are described considering the current challenges and limitations.

Voltamperometric Sensors and Biosensors Based on Carbon Nanomaterials Used for Detecting Caffeic Acid-A Review

Caffeic acid is one of the most important hydroxycinnamic acids found in various foods and plant products. It has multiple beneficial effects in the human body such as antioxidant, antibacterial, anti-inflammatory, and antineoplastic. Since overdoses of caffeic acid may have negative effects, the quality and quantity of this acid in foods, pharmaceuticals, food supplements, etc., needs to be accurately determined. The present paper analyzes the most representative scientific papers published mostly in the last 10 years which describe the development and characterization of voltamperometric sensors or biosensors based on carbon nanomaterials and/or enzyme commonly used for detecting caffeic acid and a series of methods which may improve the performance characteristics of such sensors.

SERS based sensor for mycotoxins detection: Challenges and improvements

Surface-enhanced Raman spectroscopy (SERS) has become a growing ultrasensitive analytical technique to quantify toxic molecules in foodstuffs. Monitoring the levels of chemical contaminants not only ensures food security but also offers a guideline on the production, processing, and risk analysis of consumer's health protection. The objective of this study was to point out the possible challenges associated with the detection of mycotoxins in foodstuffs. Herein, we have discussed briefly as to selectivity, accuracy, precision, robustness, ruggedness, non-specific adsorption (NSA), cross-reactivity (for both label-free and the target analyte capture approaches like the application of antibody, aptamer, molecularly imprinted polymer (MIP), linear polymer affinity agents and/or specific surface-modified nanomaterials) and their potential solution.

Mycotoxins aptasensing: From molecular docking to electrochemical detection of deoxynivalenol

This work proposes a voltammetric aptasensor to detect deoxynivalenol (DON) mycotoxin. The development steps of the aptasensor were partnered for the first time to a computational study to gain insights onto the molecular mechanisms involved into the interaction between a thiol-tethered DNA aptamer (80mer-SH) and DON. The exploited docking study allowed to find the binding region of the oligonucleotide sequence and to determine DON preferred orientation. A biotinylated oligonucleotide sequence (20mer-BIO) complementary to the aptamer was chosen to carry out a competitive format. Graphite screen-printed electrodes (GSPEs) were electrochemically modified with polyaniline and gold nanoparticles (AuNPs@PANI) by means of cyclic voltammetry (CV) and worked as a scaffold for the immobilization of the DNA aptamer. Solutions containing increasing concentrations of DON and a fixed amount of 20mer-BIO were dropped onto the aptasensor surface: the resulting hybrids were labeled with an alkaline phosphatase (ALP) conjugate to hydrolyze 1-naphthyl phosphate (1-NPP) substrate into 1-naphthol product, detected by differential pulse voltammetry (DPV). According to its competitive format, the aptasensor response was signal-off in the range 5.0-30.0 ng·mL^-1 DON. A detection limit of 3.2 ng·mL^-1 was achieved within a 1-hour detection time. Preliminary experiments on maize flour samples spiked with DON yielded good recovery values.

A competitive fluorescence assay based on free-complementary DNA for ochratoxin A detection

An ultrasensitive, rapid, and specific method for Ochratoxin A (OTA) detection was designed using complementary sequence to aptamer as a target of molecular beacon (MB). The designed loop structure of the MB has the same sequence as the aptamer with a complementary DNA (cDNA) which translates the level of the target into a measurable response. The presence of the target holds aptamer at the corresponding amount and the additional cDNAs are consumed by unbound aptamers which avails free cDNAs that resulting in fluorescence rising due to unfolding of MBs. Under the optimized conditions, the fluorescence intensity increased linearly with OTA concentration over the range of 10 pg mL^-1-1 µg mL^-1 with the detection limit of 0.247 pg mL^-1. The application of this assay in wheat sample in comparison with HPLC-MS/MS method, demonstrated that the new assay could be a potential sensing platform for OTA detection.

Dual near-infrared fluorescence-based lateral flow immunosensor for the detection of zearalenone and deoxynivalenol in maize

A novel dual near-infrared fluorescence-based lateral flow immunosensor was developed to determine zearalenone and deoxynivalenol in maize. Two near-infrared dyes with distinct fluorescence characteristics were utilized to separately label the anti-zearalenone and anti-deoxynivalenol antibodies as detection reagents. The capture antigens zearalenone-BSA and deoxynivalenol-BSA were mixed and immobilized on the same test line of nitrocellulose membrane. This assay format facilitates simultaneous detection of the two mycotoxins on a single test line. After optimizing experimental parameters, the limits of detection for zearalenone and deoxynivalenol were as low as 0.55 μg/kg and 3.8 μg/kg in maize, respectively. The spiking experiment yielded recovery ratios ranging from 81.7% to 107.3% with coefficients of variation less than 14% demonstrating high assay accuracy and precision. Moreover, the actual sample analysis produced consistent results between this method and instrumental method. Therefore, the developed immunosensor can serve as an accurate and efficient approach for monitoring mycotoxins in agricultural products.

Detection Strategies of Zearalenone for Food Safety: A Review

Zearalenone (ZEN) is a toxic compound produced by the metabolism of fungi (genus Fusarium) that threaten the food and agricultural industry belonging to the in foods and feeds. ZEN has toxic effects on human and animal health due to its mutagenicity, teratogenicity, carcinogenicity, nephrotoxicity, immunotoxicity, and genotoxicity. To ensure food safety, rapid, precise, and reliable analytical methods can be developed for the detection of toxins such as ZEN. Different selective molecular diagnostic elements are used in conjunction with different detection strategies to achieve this goal. In this review, the use of electrochemical, colorimetric, fluorometric, refractometric as well as other strategies were discussed for ZEN detection. The success of the sensors in analytical performance depends on the development of receptors with increased affinity to the target. This requirement has been met with different immunoassays, aptamer-assays, and molecular imprinting techniques. The immobilization techniques and analysis strategies developed with the combination of nanomaterials provided high precision, reliability, and convenience in ZEN detection, in which electrochemical strategies perform the best.

Gold nanoparticles mediated designing of versatile aptasensor for colorimetric/electrochemical dual-channel detection of aflatoxin B1

This work is aimed to develop of a new class of versatile aptasensor to specifically detect aflatoxin B1 (AFB1) using dual-channel detection method. To achieve this objective, gold nanoparticles (AuNPs) having peroxidase-like activity and capability of promoting silver deposition were used as the versatile label for both colorimetric and electrochemical techniques. First of all, aptamer (apt) modified Fe₃O₄@Au magnetic beads (MBs-apt) and cDNA modified AuNPs (cDNA-AuNPs) were prepared to use as capture probes and signal probes, respectively. Taking advantage of hybridization reaction between apt and cDNA, these two probes were coupled with each other to generate MBs-apt/cDNA-AuNPs bioconjugations. The high affinity between apt and AFB1 made cDNA-AuNPs detached from MBs-apt, and the released signal probes were separated and collected using an external magnetic field and used for both colorimetric and electrochemical detection channels. The dual-channel signals were directly proportional to logarithm of AFB1 concentration within the ranges of 5-200 ng mL^-1 and 0.05-100 ng mL^-1. The detection limit can reach as low as 35 pg mL^-1 and 0.43 pg mL^-1 for colorimetric and electrochemical channel, respectively. Moreover, the proposed aptasensor has been successfully applied to determine AFB1 in corn samples with satisfactory results. This dual-channel detection method can not only improve the detection precision and diversity significantly, but also can reduce the false-negative and-positive rates in food quality monitoring. We believe we have provided a general strategy with the convincing dual-readout mode which possess great promising in all of the aptamer related fields.

Recent advances in nanocomposite-based electrochemical aptasensors for the detection of toxins

Toxins are one of the major threatening factors to human and animal health, as well as economic growth. There is therefore an urgent demand from various communities to develop novel analytical methods for the sensitive detection of toxins in complex matrixes. Among the as-developed toxin detection strategies, nanocomposite-based aptamer sensors (termed as aptasensors) show tremendous potential for combating toxin pollution; in particular electrochemical (EC) aptasensors have received significant attention because of their unique advantages, including simplicity, rapidness, high sensitivity, low cost and suitability for field-testing. This paper reviewed the recently published approaches for the development of nanocomposite-/nanomaterial-based EC aptasensors for the detection of toxins with high assaying performance, and their potential applications in environmental monitoring, clinical diagnostics, and food safety control by summarizing the detection of different types of toxins, including fungal mycotoxins, algal toxins and bacterial enterotoxins. The effects of nanocomposite properties on the detection performance of EC aptasensors have been fully addressed for supplying readers with a comprehensive understanding of their improvement. The current technical challenges and future prospects of this subject have also been discussed.

Multiplex SERS-based lateral flow immunosensor for the detection of major mycotoxins in maize utilizing dual Raman labels and triple test lines

A multiplex surface-enhanced Raman scattering (SERS)-based lateral flow immunosensor was developed to determine six major mycotoxins in maize. Two characteristic Raman reporter molecules-5,5-dithiobis-2-nitrobenzoic acid (DTNB) and 4-mercaptobenzoic acid (MBA)-were used to label the synthesized Au@Ag core-shell nanoparticles for the preparation of SERS nanoprobes as detection reagents. Six corresponding hapten-protein conjugates were prepared and dispensed on three test lines of nitrocellulose membrane with two conjugates on each line as capture antigens. This design facilitates the simultaneous detection of the six mycotoxins in a single test. After optimizing the experimental parameters of immunosensor, the limits of detection were as low as 0.96 pg/mL for aflatoxin B₁, 6.2 pg/mL for zearalenone, 0.26 ng/mL for fumonisin B₁, 0.11 ng/mL for deoxynivalenol, 15.7 pg/mL for ochratoxin A, and 8.6 pg/mL for T-2 toxin, respectively. The spiking experiment showed high accuracy with recovery of 78.9-106.2 % and satisfactory assay precision with the coefficient of variations below 16 %. Moreover, this assay can be completed in less than 20 min, and its detection results were consistent with that of liquid chromatography-mass spectrometry. Therefore, the developed SERS-based lateral flow immunosensor is a promising approach for mycotoxin detection in the field.

Sensitive electrochemical detection of aflatoxin B1 using DNA tetrahedron-nanostructure as substrate of antibody ordered assembly and template of aniline polymerization

A novel strategy for AFB1 detection in grains was proposed based on DNA tetrahedron-structured probe (DTP) and horseradish peroxidase (HRP) triggered polyaniline (PANI) deposition. Briefly, the DNA tetrahedron nanostructures were assembled on the gold electrode, with carboxylic group designed on top vertex of them. The carboxylic group was conjugated with the AFB1 monoclonal antibody (mAb) to form DTP. The test sample and a known fixed concentration of HRP-labeled AFB1 were mixed and they compete for binding to DTP. The HRP assembled on the gold electrode catalyzed the polymerization of aniline on DTP. AFB1 in grains could be determined by using PANI as electrochemical signal molecules. Interestingly, DNA tetrahedron-structure, which has mechanical rigidity and structural stability, can improve antigen-antibody specific recognition and binding efficiency through the use of mAb ordered assembly. Meanwhile, nucleic acid backbone with a large amount of negative charge is good template for aniline polymerization under mild conditions.

Nanotechnology based strategies for HIV-1 and HTLV-1 retroviruses gene detection

Early detection of retroviruses including human T-cell lymphotropic virus and human immunodeficiency virus in the human body is indispensable to prevent retroviral infection propagation and improve clinical treatment. Until now, diverse techniques have been employed for the early detection of viruses. Traditional methods are time-consuming, resource-intensive, and laborious performing. Therefore, designing and constructing a selective and sensitive diagnosis system to detect serious diseases is highly demanded. Genetic detection with high sensitivity has striking significance for the early detection and remedy of disparate pathogenic diseases. The nucleic acid biosensors are based on the identification of specific DNA sequences in biological samples. Nanotechnology has an important impact on the development of sensitive biosensors. Different kinds of nanomaterials include nanoparticles, nanoclusters, quantum dots, carbon nanotubes, nanocomposites, etc., with different properties have been used to improve the performance of biosensors. Recently, DNA nanobiosensors are developed to provide simple, fast, selective, low-cost, and sensitive detection of infectious diseases. In this paper, the research progresses of nano genosensors for the detection of HIV-1 and HTLV-1 viruses, based on electrochemical, optical, and photoelectrochemical platforms are overviewed.

Recent Advances in Ochratoxin A Electrochemical Biosensors: Recognition Elements, Sensitization Technologies, and Their Applications

Ochratoxin A (OTA) is a class of mycotoxin that are mainly produced by Aspergillus and Penicillium and widely found in plant origin food. OTA-contaminated foods can cause serious harm to animals and humans, while high stability of OTA makes it difficult to remove in conventional food processing. Thus, sensitive and rapid detection of OTA undoubtedly plays an important role in OTA prevention and control. In this paper, the conventional and novel methods of OTA at home and abroad are summarized and compared. The latest research progress and related applications of novel OTA electrochemical biosensors are mainly described with a new perspective. We innovatively divided the recognition element into single and combined recognition elements. Specifically, signal amplification technologies applied to the OTA electrochemical aptasensor are proposed. Furthermore, summary of the current limitations and future challenges in OTA analysis is included, which provide reference for the further research and applications.

A novel, biocompatible and electrocatalytic stearic acid/nanosilver modified glassy carbon electrode for the sensing of paraoxon pesticide in food samples and commercial formulations

A simple, biocompatible and an enzyme-free sensing platform was developed for detection of paraoxon. The surface of a glassy carbon electrode was modified with an electrodeposition of stearic acid/nanosilver composite at -0.7 V for 40 s. The paraoxon undergoes electro-reduction at -550 mV on the modified electrode, and the limits of detection (LOD) was calculated as 0.1 nM (S/N = 3) using differential pulse voltammetry which is lower than that of the existing materials reported. The high stability observed with the modified electrode for prolonging period indicated that the sensitivity of the electrode remains active for several runs of the analysis. The developed analytical strategy was implemented for onion and paddy grain samples and good recovery rates were observed. Also, it was applied for analyzing the purity of the commercial paraoxon sample. The reliability of the developed strategy was confirmed by comparing the results of electrochemical approach with that of HPLC technique.