The simultaneous loading of catechin and quercetin on chitosan-based nanoparticles as effective antioxidant and antibacterial agent

Phytochemical Profile and Biological Effects of Spruce (Picea abies) Bark Subjected to Ultrasound Assisted and Microwave-Assisted Extractions

The bark of various tree species is a byproduct of the forestry industry that is not used at its full potential, considering the wide range of phytochemicals that are contained in these vegetal matrices and the health benefits that these compounds could provide for society. Our goal was to assess and compare the phytochemical composition of some hydroalcoholic spruce (Picea abies) bark extracts attained by ultrasound assisted extraction (UAE) and microwave-assisted extraction (MAE) and their antioxidant and antibacterial effects. The levels of total phenolics and tannins in the bark extracts were determined using methods based on the Folin-Ciocâlteu reagent, while specific phenolic and volatile compounds were identified and quantified using an UPLC-PDA method and a GC-FID method, respectively. After the chemical composition assessment, the antioxidant capacity (AC) was evaluated by measuring the scavenging ability against two free radicals (DPPH and ABTS). The minimum inhibitory concentration (MIC) was determined to assess the antibacterial activity of the extracts. The results indicated that the extracts produced by UAE had higher contents of polyphenols and tannins and also a higher content of the main phenolic compounds identified, catechin and epicatechin, compared to the MAE extracts. In contrast the highest content of volatile terpenoids (mainly α- and β-pinene) was found in the MAE extracts. All of the tested extracts exhibited relatively high antioxidant activities (especially the UAE extracts) and low MICs against Gram-positive bacteria but were mildly efficient against Gram-negative bacteria. These findings show that the spruce bark might be an important source of bioactive compounds that can be easily extracted from these industrial secondary products. Various uses of this vegetal material may emerge, due to its antioxidant and antibacterial effects.

Characterization of Epigallocatechin-Gallate-Grafted Chitosan Nanoparticles and Evaluation of Their Antibacterial and Antioxidant Potential

Nanoparticles based on chitosan modified with epigallocatechin gallate (EGCG) were synthetized by nanoprecipitation (EGCG-g-chitosan-P). Chitosan was modified by free-radical-induced grafting, which was verified by Fourier transform infrared (FTIR). Furthermore, the morphology, particle size, polydispersity index, and zeta potential of the nanoparticles were investigated. The grafting degree of EGCG, reactive oxygen species (ROS) production, antibacterial and antioxidant activities of EGCG-g-chitosan-P were evaluated and compared with those of pure EGCG and chitosan nanoparticles (Chitosan-P). FTIR results confirmed the modification of the chitosan with EGCG. The EGCG-g-chitosan-P showed spherical shapes and smoother surfaces than those of Chitosan-P. EGCG content of the grafted chitosan nanoparticles was 330 μg/g. Minimal inhibitory concentration (MIC) of EGCG-g-chitosan-P (15.6 μg/mL) was lower than Chitosan-P (31.2 μg/mL) and EGCG (500 μg/mL) against Pseudomonas fluorescens (p < 0.05). Additionally, EGCG-g-chitosan-P and Chitosan-P presented higher Staphylococcus aureus growth inhibition (100%) than EGCG at the lowest concentration tested. The nanoparticles produced an increase of ROS (p < 0.05) in both bacterial species assayed. Furthermore, EGCG-g-chitosan-P exhibited higher antioxidant activity than that of Chitosan-P (p < 0.05) in 2,2'-azino-bis (3-ethyl-benzothiazoline-6-sulfonic acid) (ABTS), 2,2-diphenyl-1-picrylhydrazyl radical (DPPH) and ferric-reducing antioxidant power assays. Based on the above results, EGCG-g-chitosan-P shows the potential for food packaging and biomedical applications.

Shelf-life extension of sweet basil leaves by edible coating with thyme volatile oil encapsulated chitosan nanoparticles

Edible coatings have potential to decrease the postharvest losses of several horticultural commodities however; there is no systematic investigation focusing on fresh herbaceous aromatic plants such as basil. Herein, the effects of chitosan (CS), chitosan nanoparticles (CSNPs) and thyme volatile oil (TVO) loaded CSNPs (TVO-CSNPs) as edible coatings on preserving the quality of sweet basil leaves were investigated. All CS coatings considerably extended the shelf life and decreased the weight loss of basil leaves relative to the control. Using TVO-CSNPs showed 2.4-fold higher shelf life than the control. The loss in photosynthetic pigments and volatile oil content were significantly retarded by CS applications more so with TVO-CSNPs treatment. Contrary, treated leaves produced lower malondialdehyde (MDA) and H₂O₂ and therefore retained the membrane functions compared to the control. All CS applications particularly with TVO-CSNPs considerably motivated the activities of catalase (CAT) and superoxide dismutase (SOD) enzymes and reduced the polyphenol oxidase (PPO) and lipoxyganase (LOX) activities relative to uncoated leaves. Overall, using TVO-CSNPs as an edible coating has a great potential in shelf life extension of basil leaves with satisfactory exterior and interior quality. Thus, it can be a promising approach to preserve the quality of fresh cut aromatic herbs.

Comparative Study Regarding the Chemical Composition and Biological Activity of Pine (Pinus nigra and P. sylvestris) Bark Extracts

The bark resulted after the industrial processing of wood represents a byproduct of the forestry industry, used in many suboptimal ways, being considered a natural waste. Currently, it has been highlighted that the bark of different woody plants may be an important source of several bioactive compounds, with various beneficial biological functions. The aim of this study is to evaluate and compare the chemical composition and biological activities of two different pine species (Pinus nigra and Pinus sylvestris) bark extracts. Ultrasound (UAE) and microwave (MAE) assisted extractions were performed in order to obtain the extracts. The total polyphenol (TPC) and total tannin (TTC) contents of the extracts were assessed via the Folin–Ciocâlteu method. The volatile and polyphenolic compounds were identified and quantified via a GC/MS analysis and an UPLC-PDA analysis, respectively. The antioxidant activity (AOA) was evaluated using the DPPH and ABTS assays, while the antibacterial activity was assessed using the minimum inhibitory concentration (MIC) protocol. The results showed that the Pinus sylvestris bark extracts obtained by UAE had a higher TPC, TTC and AOA, while the Pinus nigra bark extracts obtained by MAE had higher volatile compounds content (mainly α-pinene and β-pinene). Moreover, the inhibition of the bacterial growth was more efficient in the case of Pinus sylvestris extracts, Gram-positive bacteria being the most affected, while Gram-negative strains presented a relative resistance to the tested extract concentrations. These results may indicate the potential use of the pine bark extracts as antioxidant or antibacterial agents.

Thermally Stable and Antimicrobial Active Poly(Catechin) Obtained by Reaction with a Cross-Linking Agent

(+)-Catechin is a flavonoid with valuable antioxidant and antimicrobial properties, found in significant amounts in green tea leaves. Polymeric forms of catechin have been obtained by enzymatic reaction, photopolymerization, and polycondensation in designed processes. However, so far, poly(catechin) has not been received in the cross-linking reaction. Reactions with the cross-linking compound allowed for the preparation of antibacterial and antioxidant materials based on quercetin and rutin. The aim of the research was to obtain, for the first time, poly(catechin) by reaction with glycerol diglycide ether cross-linking compound. The polymeric form of (+)-catechin was confirmed using FTIR and UV-Vis spectroscopy. In addition, thermal analysis (TG and DSC) of the polymeric catechin was performed. The antioxidant and antibacterial activity of poly (flavonoid) was also analyzed. Poly(catechin) was characterized by greater resistance to oxidation, better thermal stability and the ability to reduce transition metal ions than (+)-catechin. In addition, the polymeric catechin had an antimicrobial activity against Staphylococcus aureus stronger than the monomer, and an antifungal activity against Aspergillus niger comparable to that of (+)-catechin. The material made on the basis of (+)-catechin can potentially be used as a pro-ecological stabilizer and functional additive, e.g., for polymeric materials as well as dressing materials in medicine.

Catechins within the Biopolymer Matrix-Design Concepts and Bioactivity Prospects

Epidemiological studies and clinical investigations proposed that catechins extracts alone may not provide a sufficient level of bioactivities and promising therapeutic effects to achieve health benefits due to a number of constraints related to poor oral absorption, limited bioavailability, sensitivity to oxidation, etc. Modern scientific studies have reported numerous techniques for the design of micro- and nano-bio-delivery systems as novel and promising strategies to overcome these obstacles and to enhance catechins' therapeutic activity. The objective assessment of their benefits, however, requires a critical comparative estimation of the advantages and disadvantages of the designed catechins-biocarrier systems, their biological activities and safety administration aspects. In this respect, the present review objectively outlines, compares and assesses the recent advances related to newly developed design concepts of catechins' encapsulation into various biopolymer carriers and their release behaviour, with a special emphasis on the specific physiological biofunctionalities of the innovative bioflavonoid/biopolymer delivery systems.

Repositioning Natural Antioxidants for Therapeutic Applications in Tissue Engineering

Although a large panel of natural antioxidants demonstrate a protective effect in preventing cellular oxidative stress, their low bioavailability limits therapeutic activity at the targeted injury site. The importance to deliver drug or cells into oxidative microenvironments can be realized with the development of biocompatible redox-modulating materials. The incorporation of antioxidant compounds within implanted biomaterials should be able to retain the antioxidant activity, while also allowing graft survival and tissue recovery. This review summarizes the recent literature reporting the combined role of natural antioxidants with biomaterials. Our review highlights how such functionalization is a promising strategy in tissue engineering to improve the engraftment and promote tissue healing or regeneration.

Eco-friendly synthesis of functionalized chitosan-based nanoantibiotic system for potential delivery of linezolid as antimicrobial agents

To obtain a healthy human being with beneficial microflora against different pathogenic infections, classical antibiotics with nanosized biomaterials were used to inhibit the growth of bacterium by their potent synergistic effect. Hence, this study planned to load an oxazolidinone antibiotic named linezolid (LD) onto functionalized chitosan (CN) with 3, 5- dinitrosalyslic acid (DA) via microwave synthesis without harsh condition. The exploring synergistic effect of linezolid (LD) with CN/DA controllable nanostructure was compact efflux-mediated methicillin-resistant Staphylococcus aureus (MRSA) burden and other selected bactericide Gram-positive ((S. aureus), Gram-negative (E. coli), Fungi (C. albicans), Yeast (A. niger), and E. faecalis. The obtained results showed that LD was incorporated into both the internal and external surface of the aggregated CN/DA nanosystem with an average diameter of 150 nm ± 4 hints of the drug loading. Owing to the nature of functionalized CN, the release efficiency attains 98.4% within 100 min. The designed LD@CN/DA exhibited inhibition zone 54 mm, 59 mm, 69 mm, 54 mm, 57 mm, and 24 mm against the tested microbes respectively rather than individual LD. The major target of the current research is achieved by using LD@CN/DA as a nanoantibiotic system that has exceptional consistently active against multi-resistant pathogens, in between MRSA which resist LD. Also, cell viability was performed even after three days of direct cell culture on the surface of the designed nanoantibiotic. The mechanism of microbial inhibition was correlated and rationalized to different charges and the presence of oxygen species against microbial infections. Our findings provide a deep explanation about nanostructured antibiotics design with enhanced potentially pathogen-specific activity.

Encapsulation of Oleuropein in Nanostructured Lipid Carriers: Biocompatibility and Antioxidant Efficacy in Lung Epithelial Cells

Oxidative damage has been linked to a number of diseases. Oleuropein (OLE), a natural occurring polyphenol from olive leaves (Olea europaea L.), is known to be a potent antioxidant compound with inherent instability and compromised bioavailability. Therefore, in this work, nanostructured lipid carriers (NLCs) were proposed for OLE encapsulation to protect and improve its antioxidant efficacy. The lipid matrix, composed of olive oil and Precirol, was optimized prior to OLE encapsulation. The characterization of the optimized oleuropein-loaded NLCs (NLC-OLE) showed a mean size of 150 nm, a zeta potential of −21 mV, an encapsulation efficiency of 99.12%, sustained release profile, and improved radical scavenging activity. The cellular in vitro assays demonstrated the biocompatibility of the NLCs, which were found to improve and maintain OLE antioxidant efficacy in the A549 and CuFi-1 lung epithelial cell lines, respectively. Overall, these findings suggest a promising potential of NLC-OLE to further design a pulmonary formulation for OLE delivery in lung epithelia.

Design of a Multifunctional Biomaterial Inspired by Ancient Chinese Medicine for Hair Regeneration in Burned Skin

In deep burn injuries, the dermis of the skin is often severely damaged, and hair follicles are also lost and lose the potential for regeneration. Therefore, the development of wound dressings that promote hair follicle regeneration has important clinical significance. In this study, inspired by an ancient Chinese medicine prescription, a novel fibrous membrane (P/Qu/Cup; P, PCL; Qu, quercetin; Cup, cuprorivaite, CaCuSi₄O₁₀) containing quercetin-copper (Qu-Cu) chelates was fabricated by using quercetin and a highly bioactive bioceramic (CaCuSi₄O₁₀) incorporated in PCL/gelatin electrospun fibers. The fibrous membrane can effectively release Qu and Cu ions to induce proliferation, migration, and differentiation of skin and hair follicle related cells, and the Qu, Cu ions, and Si ions released from the composite membrane revealed synergistic activity to stimulate hair follicle regeneration and wound healing. Our study demonstrated that the analysis of the common components in ancient Chinese prescription is an effective approach to design novel bioactive materials for regenerative medicine.

Effect of Different Processing Methods on Phytochemical Contents and Neuroprotective Activity of Camellia euphlebia Leaves Extract

Camellia euphlebia is a new food source and traditional folk medicine in China. Previous studies have demonstrated the antidepressant activity of Camellia euphlebia extract by both in vivo and in vitro experiments. The effects of different pretreatments on phytochemical contents and neuroprotective activity of Camellia euphlebia extract were further investigated in order to develop an optimal processing method that makes the extraction more efficient. Six different powders of Camellia euphlebia leaves were prepared by different pretreatments. The particle size and morphology were examined by using a Malvern particle size analyzer and scanning electron microscopy, respectively. The results showed that the percentage of powder particle size within a range of 0.2∼40 μm was up to 79.18% after press-shear assisted interaction technology pretreatment by 2% addition of shellfish shell powder, and the cells were broken completely. Additionally, the contents of flavonoids, polysaccharides, polyphenols, saponins, and catechin in the extract were 11.78 ± 0.62%, 34.60 ± 3.37%, 6.15 ± 0.29%, 9.43 ± 1.19%, and 1.99 ± 0.11%, respectively, which were higher than those of the other five extracts. Moreover, the extract had the strongest neuroprotective activity by comparing the neuroprotective effect of different extracts on corticosterone-induced neurotoxicity in differentiated PC12 cells. It is concluded that press-shear assisted interaction technology with 2% addition of shellfish shell powder pretreatment, to a great extent, improved the dissolution of bioactive ingredients in Camellia euphlebia.

Novel Catechin-Tiopronin Conjugates Derived from Grape Seed Proanthocyanidin Degradation: Process Optimization, High-Speed Counter-Current Chromatography Preparation, as Well as Antibacterial Activity

Tiopronin, as a novel thiol-containing nucleophile, was introduced for depolymerizing polymeric proanthocyanidins from grape seed into catechins and three new proanthocyanidin-tiopronin degradation products: (+)-catechin-4β-S-tiopronin methyl ester (CT), (-)-epicatechin-4β-S-tiopronin methyl ester (ECT), and (-)-epicatechin gallate-4β-S-tiopronin methyl ester (ECGT). A Box-Behnken design was employed to optimize degradation conditions based on single-factor experiments to obtain target products. Each of the new degradation compounds was isolated by the high-speed counter-current chromatography combined with semipreparative high performance liquid chromatography in large amounts, and then, their structures were identified by ¹H NMR, ¹³C NMR, 2D-NMR, as well as mass spectrometry analysis. The absolute configurations were further confirmed by comparison between the calculated electronic circular dichroism and experimental spectra. Further evaluation of antibacterial activities of these compounds showed that CT and ECT possessed more inhibiting capacity against Staphylococcus aureus and Escherichia coli than parent compound catechin and epicatechin. However, ECGT has no bacteriostatic capacity against these two bacteria.

Free Radical Scavenging and Some Pharmaceutical Utilities of Nanoparticles in the Recent Scenario

BACKGROUND

Nanopharmaceuticals have rapidly emerged as a means to cure several diseases. There are numerous reports describing the development and application of nanopharmaceuticals. Here, we discussed nanoparticle synthesis and the mechanisms to scavenge free radicals. We also discuss their major properties and list several commercially available nanomedicines.

RESULTS

Reactive oxygen and hydrogen species are formed during normal metabolism, and excessive reactive species can damage proteins, lipids, and DNA and cause disease. Plant- and microbe-based nanoparticles, which can protect tissues from free radical damage, have recently gained research momentum because they are inexpensive and safe.

CONCLUSION

Synthetic and biocompatible nanoparticles exhibit antioxidant, antidiabetic, anti-inflammatory, and anticancer properties, which can be used to treat several diseases. Further studies are needed to investigate their sizes, dose-dependent activities, and mechanisms of action.

Nutraceutical formulation, characterisation, and in-vitro evaluation of methylselenocysteine and selenocystine using food derived chitosan:zein nanoparticles

Selenoamino acids (SeAAs) have been shown to possess antioxidant and anticancer properties. However, their bioaccessibility is low and they may be toxic above the recommended nutritional intake level, thus improved targeted oral delivery methods are desirable. In this work, the SeAAs, Methylselenocysteine (MSC) and selenocystine (SeCys₂) were encapsulated into nanoparticles (NPs) using the mucoadhesive polymer chitosan (Cs), via ionotropic gelation with tripolyphosphate (TPP) and the NPs produced were then coated with zein (a maize derived prolamine rich protein). NPs with optimized physicochemical properties for oral delivery were obtained at a 6: 1 ratio of Cs:TPP, with a 1:0.75 mass ratio of Cs:zein coating (diameter ~260 nm, polydispersivity index ~0.2, zeta potential >30 mV). Scanning Electron Microscopy (SEM) analysis showed that spheroidal, well distributed particles were obtained. Encapsulation Efficiencies of 80.7% and 78.9% were achieved, respectively, for MSC and SeCys₂ loaded NPs. Cytotoxicity studies of MSC loaded NPs showed no decrease in cellular viability in either Caco-2 (intestine) or HepG2 (liver) cells after 4 and 72 h exposures. For SeCys₂ loaded NPs, although no cytotoxicity was observed in Caco-2 cells after 4 h, a significant reduction in cytotoxicity was observed, compared to pure SeCys₂, across all test concentrations in HepG2 after 72 h exposure. Accelerated thermal stability testing of both loaded NPs indicated good stability under normal storage conditions. Lastly, after 6 h exposure to simulated gastrointestinal tract environments, the sustained release profile of the formulation showed that 62 ± 8% and 69 ± 4% of MSC and SeCys₂, had been released from the NPs respectively.

Incorporation of 3,3'-Diindolylmethane into Nanocapsules Improves Its Photostability, Radical Scavenging Capacity, and Cytotoxicity Against Glioma Cells

3,3'-Diindolylmethane (DIM) is a phytochemical that presents health benefits (antitumor, antioxidant, and anti-inflammatory effects). However, it is water insoluble and thermo- and photolabile, restraining its pharmaceutical applications. As a strategy to overcome such limitations, this study aimed the development and characterization of DIM-loaded nanocapsules (NCs) prepared with different compositions as well as the in vitro assessment of scavenging activity and cytotoxicity. The formulations were obtained using the interfacial deposition of preformed polymer method and were composed by Eudragit® RS100 or ethylcellulose as polymeric wall and primula or apricot oil as the core. All the formulations had adequate physicochemical characteristics: nanometric size (around 190 nm), low polydispersity index (< 0.2), pH value at acid range, high values of zeta potential, drug content, and encapsulation efficiency (~ 100%). Besides, nanoencapsulation protected DIM against UVC-induced degradation and increased the scavenging activity assessed by the 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid) and 1-1-diphenyl-2-picrylhydrazyl methods. The developed DIM-loaded nanocapsules were further evaluated regarding the in vitro release profile and cytotoxicity against a human glioblastoma cell line (U87 cells). The results demonstrated that the nanoencapsulation promoted a sustained release of the bioactive compound (in the range of 58-78% after 84 h) in comparison to its free form (86% after 12 h), as well as provided a superior cytotoxic effect against the U87 cells in the highest concentrations. Therefore, our results suggest that nanoencapsulation could be a promising approach to overcome the DIM physicochemical limitations and potentialize its biological properties.