Chapter 7 Microbial peptidoglycan (murein) hydrolases

Non-specific immunity-enhancing effects of tryptic casein hydrolysate versus Fermosorb for treatment/prophylaxis of newborn calf colibacillosis

The effects of treatment/prophylaxis of newborn calf colibacillosis with tryptic casein hydrolysate (TCH), recently shown to be a novel type of antimicrobial acting through stimulation of the microbial autolytic system, versus an authorized veterinary drug, Fermosorb, were evaluated. Both products showed similar high therapeutic and prophylactic efficacies, but hematological indices and daily weight gain of cured/protected animals were better with TCH. The differences in hemoglobin and hematocrit levels, total protein, gamma-globulin and sulfhydryl group quantities, bactericidal and lysozyme activities as well as daily weight gain at the end of treatment/prophylaxis were statistically significant (P<0.05-0.000005). Statistically significant differences (P<0.05-0.0005) in favor of TCH were also observed when bactericidal activity, total protein quantity of serum as well as daily weight gain of the animals were compared on the 90th day after birth. We conclude that TCH acts not only as an antimicrobial, but also as an immunostimulant (and growth promoter). The immunostimulatory activity of TCH most probably derives from a synergistic action of bioactive peptides encrypted in the preparation itself and the cell wall fragments resulting from microbial autolysis induction.

Overproduction of inactive variants of the murein synthase PBP1B causes lysis in Escherichia coli

Penicillin-binding protein 1B (PBP1B) of Escherichia coli is a bifunctional murein synthase containing both a transpeptidase domain and a transglycosylase domain. The protein is present in three forms (alpha, beta, and gamma) which differ in the length of their N-terminal cytoplasmic region. Expression plasmids allowing the production of native PBP1B or of PBP1B variants with an inactive transpeptidase or transglycosylase domain or both were constructed. The inactive domains contained a single amino acid exchange in an essential active-site residue. Overproduction of the inactive PBP1B variants, but not of the active proteins, caused lysis of wild-type cells. The cells became tolerant to lysis by inactive PBP1B at a pH of 5.0, which is similar to the known tolerance for penicillin-induced lysis under acid pH conditions. Lysis was also reduced in mutant strains lacking several murein hydrolases. In particular, a strain devoid of activity of all known lytic transglycosylases was virtually tolerant, indicating that mainly the lytic transglycosylases are responsible for the observed lysis effect. A possible structural interaction between PBP1B and murein hydrolases in vivo by the formation of a multienzyme complex is discussed.

Characterization of RAT, an autolysis regulator in Staphylococcus aureus

In trying to identify genetic loci involved in the regulation of cap5 genes in Staphylococcus aureus, we isolated a transposon mutant that exhibited a growth defect, enhanced autolysis and increased sensitivity to Triton X-100 and penicillin, attributable in part to increased murein hydrolase activity. Analysis of the chromosomal sequence flanking the transposon insertion site revealed that the gene disrupted in the mutant encodes an open reading frame of 147 amino acids. We named this gene rat, which stands for regulator of autolytic activity. Sequence analysis indicated that Rat is homologous to the MarR and, to a lesser extent, the SarA protein families. Mutations in rat resulted in decreased expression of known autolytic regulators lytSR, lrgAB and arlRS. Gel shift studies indicated that Rat binds to the lytRS and arlRS promoters, thus confirming Rat as a DNA-binding protein to these known repressors of autolytic activity. As anticipated, rat appears to be a negative regulator of autolysin genes including lytM and lytN. These data suggest that the rat gene product is an important regulator of autolytic activity in S. aureus.

The Staphylococcus aureus cidAB operon: evaluation of its role in regulation of murein hydrolase activity and penicillin tolerance

Recent studies have shown that expression of the Staphylococcus aureus lrgAB operon inhibits murein hydrolase activity and decreases sensitivity to penicillin-induced killing. It was proposed that the lrgAB gene products function in a manner analogous to an antiholin, inhibiting a putative holin from transporting murein hydrolases out of the cell. In the present study the cidAB operon was identified and characterized based on the similarity of the cidA and cidB gene products to the products of the lrgAB operon. Zymographic and quantitative analyses of murein hydrolase activity revealed that mutation of the cidA gene results in decreased extracellular murein hydrolase activity compared to that of S. aureus RN6390, the parental strain. Complementation of cidA expression restored the wild-type phenotype, indicating that expression of the cidAB operon has a positive influence on extracellular murein hydrolase activity. The cidA mutant also displayed a significant decrease in sensitivity to the killing effects of penicillin. However, complementation of the cidA defect did not restore penicillin sensitivity to wild-type levels. Reverse transcriptase PCR also revealed that cidAB is maximally expressed during early exponential growth, opposite of what was previously observed for lrgAB expression. Based on these results, we propose that the cidAB operon encodes the holin-like counterpart of the lrgAB operon and acts in a manner opposite from that of lrgAB by increasing extracellular murein hydrolase activity and increasing sensitivity to penicillin-induced killing.

Characterization of AcmB, an N-acetylglucosaminidase autolysin from Lactococcus lactis

A gene encoding a putative peptidoglycan hydrolase, named acmB, which is a paralogue of the major autolysin acmA gene, was identified in the Lactococcus lactis genome sequence. The acmB gene is transcribed in L. lactis MG1363 and its expression is modulated during cellular growth. The encoded AcmB protein has a modular structure with three domains: an N-terminal domain, especially rich in Ser, Thr, Pro and Asn residues, resembling a cell-wall-associated domain; a central domain homologous to the Enterococcus hirae muramidase catalytic domain; and a C-terminal domain of unknown function. A recombinant AcmB derivative, devoid of its N-terminal domain, was expressed in Escherichia coli. It exhibited hydrolysing activity on the peptidoglycan of several Gram-positive bacteria, including L. lactis. Though showing sequence similarity with enterococcal muramidase, AcmB has N-acetylglucosaminidase specificity. The acmB gene was inactivated in order to evaluate the role of the enzyme. AcmB does not appear to be involved in cell separation but contributes to cellular autolysis.

Molecular characterization of an atl null mutant of Staphylococcus aureus

atl is a gene encoding a bifunctional peptidoglycan hydrolase of Staphylococcus aureus. The gene product of atl is a 138 kDa protein that has an amidase domain and a glucosaminidase domain, and undergoes processing to generate two major peptidoglycan hydrolases, a 51 kDa glucosaminidase and a 62 kDa amidase in culture supernatant. An atl null mutant was isolated by allelic replacement and characterized. The mutant grew in clusters and sedimented when grown in broth culture. Analysis of peptidoglycan prepared from the wild type and the mutant revealed that there were no differences in muropeptide composition or in glycan chain length distribution. On the other hand, the atl mutation resulted in pleiotropic effects on cell surface nature. The mutant cells showed complete inhibition of metabolic turnover of cell wall peptidoglycan and revealed a rough outer cell wall surface. The mutation also decreased the amount of protein non-covalently bound to the cell surface and altered the protein profile, but did not affect proteins covalently associated with the cell wall. Lysis of growing cells treated with otherwise lytic concentration of penicillin G was completely inhibited in the mutant, but that of non-growing cells was not affected by the mutation. The atl mutation did not significantly affect the ability of S. aureus to provoke an acute infection when inoculated intraperitoneally in a mouse sepsis model. These results further support the supposition that atl gene products are involved in cell separation, cell wall turnover and penicillin-induced lysis of the cells.

Identification of MpaA, an amidase in Escherichia coli that hydrolyzes the gamma-D-glutamyl-meso-diaminopimelate bond in murein peptides

MpaA amidase was identified in Escherichia coli by its amino acid sequence homology with the ENP1 endopeptidase from Bacillus sphaericus. The enzymatic activity of MpaA, i.e., hydrolysis of the gamma-D-glutamyl-diaminopimelic acid bond in the murein tripeptide L-alanyl-gamma-D-glutamyl-meso-diaminopimelic acid, was demonstrated in the cell extract of a strain expressing mpaA from a multicopy plasmid. An mpaA mpl (murein peptide ligase) double mutant accumulated large amounts of murein tripeptide in its cytoplasm, consistent with the premise that MpaA degrades the tripeptide if its recycling via the peptidoglycan biosynthetic pathway is blocked.

Lytic and nonlytic mechanism of inactivation of gram-positive bacteria by lysozyme under atmospheric and high hydrostatic pressure

A different behavior was observed in three gram-positive bacteria exposed to hen egg white lysozyme by plate counts and phase-contrast microscopy. The inactivation of Lactobacillus johnsonii was accompanied by spheroplast formation, which is an indication of peptidoglycan hydrolysis. Staphylococcus aureus was resistant to lysozyme and showed no signs of peptidoglycan hydrolysis, and Listeria innocua was inactivated and showed indications of cell leakage but not of peptidoglycan hydrolysis. Under high hydrostatic pressure, S. aureus also became sensitive to lysozyme but did not form spheroplasts and was not lysed. These results suggested the existence of a nonlytic mechanism of bactericidal action of lysozyme on the latter two bacteria, and this mechanism was further studied in L. innocua. Elimination of the enzymic activity of lysozyme by heat denaturation or reduction with beta-mercaptoethanol eliminated this bactericidal mechanism. By means of a LIVE/DEAD viability stain based on a membrane-impermeant fluorescent dye, the nonlytic mechanism was shown to involve membrane perturbation. In the absence of lysozyme, high-pressure treatment was shown to induce autolytic activity in S. aureus and L. innocua.

Substrate specificity of the AmpG permease required for recycling of cell wall anhydro-muropeptides

AmpG was originally identified as a gene required for induction of beta-lactamase. Subsequently, we found AmpG to be a permease required for recycling of murein tripeptide and uptake of anhydro-muropeptides. We have now studied the specificity of the AmpG permease. The principal requirement is for the presence of the disaccharide, N-acetylglucosaminyl-beta-1,4-anhydro-N-acetylmuramic acid (GlcNAc-anhMurNAc). These unique substrates for AmpG, which contain murein peptides linked to GlcNAc-anhMurNAc, are produced by turnover of the cell wall during logarithmic growth. AmpG permease is sensitive to carbonylcyanide m-chlorophenylhydrazone, demonstrating that AmpG permease is a single-component permease and that transport is dependent on the proton motive force.

The autolysin of Porphyromonas gingivalis is involved in outer membrane vesicle release

An autolysin mutant of Porphyromonas gingivalis was constructed and its outer membrane vesicle production was compared to that of wild-type strain 381. The autolysin mutant produced elevated levels of vesicles relative to the parental strain. It is suggested that vesicle formation of this organism may be regulated by cell wall turnover.

Effects of multiple deletions of murein hydrolases on viability, septum cleavage, and sensitivity to large toxic molecules in Escherichia coli

The multiplicity of murein hydrolases found in most bacteria presents an obstacle to demonstrating the necessity of these potentially autolytic enzymes. Therefore, Escherichia coli mutants with deletions in multiple murein hydrolases, including lytic transglycosylases, amidases, and DD-endopeptidases, were constructed. Even a mutant from which seven different hydrolases were deleted was viable and grew at a normal rate. However, penicillin-induced lysis was retarded. Most of the mutants were affected in septum cleavage, which resulted in the formation of chains of cells. All three enzymes were shown to be capable of splitting the septum. Failure to cleave the septum resulted in an increase in outer membrane permeability, and thus the murein hydrolase mutants did not grow on MacConkey agar plates. In addition, the hydrolase mutants not only could be lysed by lysozyme in the absence of EDTA but also were sensitive to high-molecular-weight antibiotics, such as vancomycin and bacitracin, which are normally ineffective against E. coli.

Helicobacter pylori expresses an autolytic enzyme: gene identification, cloning, and theoretical protein structure

Helicobacter pylori is an important pathogen of the gastric system. The clinical outcome of infection is thought to be correlated with some genetic features of the bacterium. However, due to the extreme genetic variability of this organism, it is hard to draw definitive conclusions concerning its virulence factors. Here we describe a novel H. pylori gene which expresses an autolytic enzyme that is also capable of degrading the cell walls of both gram-positive and gram-negative bacteria. We designated this gene lys. We found this gene and observed its expression in a number of unrelated clinical strains, a fact that suggests that it is well conserved in the species. A comparison of the nucleotide sequences of lys and the hypothetical gene HP0339 from H. pylori strain ATCC 26695 revealed almost total identity, except for the presence of an insertion consisting of 24 nucleotides in the lys sequence. The coding sequences of lys and HP0339 show a high degree of homology with the coding sequence of bacteriophage T4 lysozyme. Because of this similarity, it was possible to model the three-dimensional structures of both the lys and HP0339 products.

Positive role of peptidoglycan breaks in lactococcal biofilm formation

Bacterial attachment to solid matrices depends on adhesive molecules present on the cell surface. Here we establish a positive correlation between peptidoglycan (PG) breaks, rather than particular molecules, and biofilm-forming capacity in the Gram-positive bacterium Lactococcus lactis. The L. lactis acmA strain, which is defective in PG hydrolase, adhered less efficiently than the wild-type (wt) strain to different solid surfaces and was unable to form biofilms. These phenotypes were abolished by addition of lysozyme, a PG hydrolytic enzyme. Thus, the presence of PG breaks introduced by PG hydrolase, and not the AcmA protein itself, appears to be responsible for biofilm formation. Two different genetic screens confirmed the importance of PG breaks in L. lactis biofilm formation. Using the chain-forming ability of the acmA strain as a phenotypic indicator of PG integrity, we selected for insertional mutants generating short chains. Five independent mutants were all mapped to ponA, which encodes the PG synthesis enzyme PBP1A. Double acmA ponA mutants displayed increased adhesion and biofilm-forming capacity. Direct selection for strains with increased biofilm-forming capacity resulted in the isolation of another five mutations in ponA. Based on these results, we conclude that PG breaks are important for both adhesion and biofilm formation in L. lactis.

Molecular peculiarities of the lytA gene isolated from clinical pneumococcal strains that are bile insoluble

The autolytic LytA amidase from 12 bile (deoxycholate)-insoluble streptococcal isolates (formerly classified as atypical Streptococcus pneumoniae) showing different antibiotic resistance patterns was studied. These atypical strains, which autolyze at the end of the stationary phase of growth, contain highly divergent lytA alleles (pairwise evolutionary distances of about 20%) compared to the lytA alleles of typical pneumococci. The atypical LytA amidases exhibit a peculiar deletion of two amino acids responsible for cell wall anchoring in the carboxy-terminal domain and have a reduced specific activity. These enzymes were inhibited by 1% deoxycholate but were activated by 1% Triton X-100, a detergent that could be used as an alternative diagnostic test for this kind of strain. Preparation of functional chimeric enzymes, PCR mutagenesis, and gene replacements demonstrated that the characteristic bile insolubility of these atypical strains was due to their peculiar carboxy-terminal domain and that the 2-amino-acid deletion was responsible for the inhibitory effect of deoxycholate. However, the deletion alone did not affect the specific activity of LytA. A detailed characterization of the genes encoding the 16S rRNA and SodA together with multilocus sequence typing indicated that the strains studied here are not a single clone and, although they cannot be strictly classified as typical pneumococci, they represent a quite diverse pool of organisms closely related to S. pneumoniae. The clinical importance of these findings is underlined by the role of the lytA gene in shaping the course of pneumococcal diseases. This study can also contribute to solving diagnostic problems and to understanding the evolution and pathogenic potential of species of the Streptococcus mitis group.

C-terminal domains of Listeria monocytogenes bacteriophage murein hydrolases determine specific recognition and high-affinity binding to bacterial cell wall carbohydrates

Listeria monocytogenes phage endolysins Ply118 and Ply500 share a unique enzymatic activity and specifically hydrolyse Listeria cells at the completion of virus multiplication in order to release progeny phage. With the aim of determining the molecular basis for the lytic specificity of these enzymes, we have elucidated their domain structure and examined the function of their unrelated and unique C-terminal cell wall binding domains (CBDs). Analysis of deletion mutants showed that both domains are needed for lytic activity. Fusions of CBDs with green fluorescent protein (GFP) demonstrated that the C-terminal 140 amino acids of Ply500 and the C-terminal 182 residues of Ply118 are necessary and sufficient to direct the murein hydrolases to the bacterial cell wall. CBD500 was able to target GFP to the surface of Listeria cells belonging to serovar groups 4, 5 and 6, resulting in an even staining of the entire cell surface. In contrast, the CBD118 hybrid bound to a ligand predominantly present at septal regions and cell poles, but only on cells of serovars 1/2, 3 and 7. Non-covalent binding to surface carbohydrate ligands occurred in a rapid, saturation-dependent manner. We measured 4 x 104 and 8 x 104 binding sites for CBD118 and CBD500 respectively. Surface plasmon resonance analysis revealed unexpected high molecular affinity constants for the CBD-ligand interactions, corresponding to nanomolar affinities. In conclusion, we show that the CBDs are responsible for targeting the phage endolysins to their substrates and function to confer recognition specificity on the proteins. As the CBD sequences contain no repeats and lack all known sequence motifs for anchoring of proteins to the bacterial cell, we conclude that they use unique structural motifs for specific association with the surface of Gram-positive bacteria.

Depolarization of the membrane potential by beta-lactams as a signal to induce autolysis

The effect of beta-lactam antibiotics that are known to inhibit cell wall biosynthesis and induce cell wall autolysis on the electrophysiological state of the plasma membrane in Streptomyces griseus was studied. Addition of various beta-lactam antibiotics induced a dose- and growth-stage-dependent depolarization of the membrane potential of Streptomyces griseus. The hydrolyzed biologically inactive derivative penicilloic acid had no depolarizing effect on the membrane potential. The ionophore gramicidin D, while depolarizing the membrane potential, also induced a dose-dependent increase in cell wall lysis. These observations suggest that alteration of the transmembrane potential could be an important signal in triggering cell wall autolysis of S. griseus.

Fast lysis of Escherichia coli filament cells requires differentiation of potential division sites

Periodic activation of zonal peptidoglycan (murein) synthesis at division sites in Escherichia coli has been reported recently. Zonal synthesis is responsible for septum formation, whereas elongation of the cell sacculus is performed by diffuse insertion of precursors. Zonal synthesis can be triggered in ftsA, ftsQ and ftsI (pbpB) division mutants growing as filaments at the restrictive temperature, but not in ftsZ mutant strains. The lytic response to beta-lactams of cells able or unable to periodically trigger a zonal mode of murein synthesis could be substantially different. Therefore, we investigated the response to the bacteriolytic beta-lactam cefsulodin of ftsZ and ftsI mutants growing at the restrictive (42 degrees C) temperature. The ftsI cells lysed early and quickly after addition of the antibiotic. Sacculi of lysed cells were transversely cut in a very sharp way. In contrast the ftsZ strain lysed late and slowly after addition of the antibiotic and sacculi showed a generalized weakening of the murein network and extended breaks with a frayed appearance. No transversely cut sacculi comparable to those seen in the ftsI samples were found. Our results strongly support that beta-lactam-induced lysis occurs preferentially at division sites because of the activation of zonal murein synthesis at the initiation of septation.

Evidence that the cell wall of Bacillus subtilis is protonated during respiration

Several independent experiments suggest that cell walls of Bacillus subtilis are protonated during growth. When cells were grown in the presence of fluorescein-labeled dextran to saturate the cell walls, centrifuged, and suspended in PBS, fluorescence-activated cell sorter analyses revealed the bacteria were only poorly fluorescent. In contrast, when the bacteria were purged with N(2) to dissipate protonmotive force (pmf) fluorescence became intense. Upon reconstitution of the pmf with phenazine methosulfate, glucose, and oxygen, fluorescence declined. Another approach used pH-dependent chemical modification of cell walls. The walls of respiring B. subtilis cells were amenable to carboxylate modification by [(14)C]ethanolamine and 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide. The carbodiimide activation of carboxylate groups occurs only in acidic conditions. Upon dissipation of pmf the walls were refractory to chemical modification. Ammonium groups can be condensed with FITC in alkaline medium, but the condensation is very slow in acidic buffers. It was found that the derivatization of the walls with FITC could occur in the absence of pmf. The use of pH-dependent fluorophores and pH-dependent chemical modification reactions suggest that cell walls of respiring B. subtilis cells have a relatively low pH environment. This study shows a bacterium has a protonated compartment. Acidification of cell walls during growth may be one means of regulating autolytic enzymes.

Identification of a dedicated recycling pathway for anhydro-N-acetylmuramic acid and N-acetylglucosamine derived from Escherichia coli cell wall murein

Turnover and recycling of the cell wall murein represent a major metabolic pathway of Escherichia coli. It is known that E. coli efficiently reuses, i.e., recycles, its murein tripeptide, L-alanyl-gamma-D-glutamyl-meso-diaminopimelate, to form new murein. However, the question of whether the cells also recycle the amino sugar moieties of cell wall murein has remained unanswered. It is demonstrated here that E. coli recycles the N-acetylglucosamine present in cell wall murein degradation products for de novo murein and lipopolysaccharide synthesis. Furthermore, E. coli also recycles the anhydro-N-acetylmuramic acid moiety by first converting it into N-acetylglucosamine. Based on the results obtained by studying mutants unable to recycle amino sugars, the pathway for recycling is revealed.

Involvement of N-acetylmuramyl-L-alanine amidases in cell separation and antibiotic-induced autolysis of Escherichia coli

N-acetylmuramyl-L-alanine amidases are widely distributed among bacteria. However, in Escherichia coli, only one periplasmic amidase has been described until now, which is suggested to play a role in murein recycling. Here, we report that three amidases, named AmiA, B and C, exist in E. coli and that they are involved in splitting of the murein septum during cell division. Moreover, the amidases were shown to act as powerful autolytic enzymes in the presence of antibiotics. Deletion mutants in amiA, B and C were growing in long chains of unseparated cells and displayed a tolerant response to the normally lytic combination of aztreonam and bulgecin. Isolated murein sacculi of these chain-forming mutants showed rings of thickened murein at the site of blocked septation. In vitro, these murein ring structures were digested more slowly by muramidases than the surrounding murein. In contrast, when treated with the amidase AmiC or the endopeptidase MepA, the rings disappeared, and gaps developed at these sites in the murein sacculi. These results are taken as evidence that highly stressed murein cross-bridges are concentrated at the site of blocked cell division, which, when cleaved, result in cracking of the sacculus at this site. As amidase deletion mutants accumulate trimeric and tetrameric cross-links in their murein, it is suggested that these structures mark the division site before cleavage of the septum.

The autolysin Ami contributes to the adhesion of Listeria monocytogenes to eukaryotic cells via its cell wall anchor

Adherence of pathogenic microorganisms to the cell surface is a key event during infection. We have previously reported the characterization of Listeria monocytogenes transposon mutants defective in adhesion to eukaryotic cells. One of these mutants had lost the ability to produce Ami, a 102 kDa autolytic amidase with an N-terminal catalytic domain and a C-terminal cell wall-anchoring domain made up of repeated modules containing the dipeptide GW ('GW modules'). We generated ami null mutations by plasmid insertion into L. monocytogenes strains lacking the invasion proteins InlA (EGDDeltainlA), InlB (EGDDeltainlB) or both (EGDDeltainlAB). These mutants were 5-10 times less adherent than their parental strains in various cell types. The adhesion capacity of the mutants was restored by complementation with a DNA fragment encoding the Ami cell wall-anchoring domain fused to the Ami signal peptide. The cell-binding activity of the Ami cell wall-anchoring domain was further demonstrated using the purified polypeptide. Growth of the ami null mutants constructed in EGD and EGDDeltainlAB backgrounds was attenuated in the livers of mice inoculated intravenously, indicating a role for Ami in L. monocytogenes virulence. Adhesive properties have recently been reported in the non-catalytic domain of two other autolysins, Staphylococcus epidermidis AtlE and Staphylococcus saprophyticus Aas. Interestingly, we found that these domains were also composed of repeated GW modules. Thus, certain autolysins appear to promote bacterial attachment by means of their GW repeat domains. These molecules may contribute to the colonization of host tissues by Gram-positive bacteria.

Modification of autolysis by synthetic peptides derived from the presumptive binding domain of Staphylococcus aureus autolysin

The autolytic cell wall hydrolase of Staphylococcus aureus, Atl, contains three highly cationic repeats in the central region of the amino acid sequence, and the repeats are presumed to have the role of binding the enzyme to some components on the cell surface. To explain the possible function of the repeats, we synthesized a number of 10- to 30-mer oligopeptides based on the Atl amino acid sequence (Thr432-Lys610) containing repeat 1, and examined their effects on the autolysis of S. aureus cells. When the peptides were added to a cell suspension of S. aureus under low ionic strength conditions, five peptides, A10, A11, A14, A16 and B9, showed immediate increases in optical density (OD) of the cell suspension accompanied by decreases in viable cell counts. After the immediate increases, the ODs for A10 and A14 changed little in the first 2 hr. In contrast, the ODs for A11 and A16 decreased rapidly. When peptide A10 was added to suspensions of heat-killed whole cells, crude cell walls and a crude peptidoglycan preparation, their ODs were increased approximately 2-fold. In contrast, the OD was not increased when the peptide was added to a suspension of pure peptidoglycan from which anionic polymers had been removed. Light microscopic and transmission electron microscopic study showed that A10 and A14 inhibited autolysis and that A11 and A16 induced autolysis earlier than the control. These results suggest strongly that the peptides adsorb to and precipitate on the anionic cell surface polymers such as teichoic acid and lipoteichoic acid via ionic interaction. The effects of peptides on the autolysis may be the results of the modification of S. aureus autolysin activities. These peptides, especially the 10-mer peptide B9 (PGTKLYTVPW) that represents the C-terminal half of A10 and N-terminal half of A11, may be important segments for Atl to bind to the cell surface.

Identification of Mur, an atypical peptidoglycan hydrolase derived from Leuconostoc citreum

A gene encoding a protein homologous to known bacterial N-acetyl-muramidases has been cloned from Leuconostoc citreum by a PCR-based approach. The encoded protein, Mur, consists of 209 amino acid residues with a calculated molecular mass of 23,821 Da including a 31-amino-acid putative signal peptide. In contrast to most of the other known peptidoglycan hydrolases, L. citreum Mur protein does not contain amino acid repeats involved in cell wall binding. The purified L. citreum Mur protein was shown to exhibit peptidoglycan-hydrolyzing activity by renaturing sodium dodecyl sulfate-polyacrylamide gel electrophoresis. An active chimeric protein was constructed by fusion of L. citreum Mur to the C-terminal repeat-containing domain (cA) of AcmA, the major autolysin of Lactococcus lactis. Expression of the Mur-cA fusion protein was able to complement an acmA mutation in L. lactis; normal cell separation after cell division was restored by Mur-cA expression.

Negative and positive ion matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and positive ion nano-electrospray ionization quadrupole ion trap mass spectrometry of peptidoglycan fragments isolated from various Bacillus species

A general approach for the detailed characterization of sodium borohydride-reduced peptidoglycan fragments (syn. muropeptides), produced by muramidase digestion of the purified sacculus isolated from Bacillus subtilis (vegetative cell form of the wild type and a dacA mutant) and Bacillus megaterium (endospore form), is outlined based on UV matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) and nano-electrospray ionization (nESI) quadrupole ion trap (QIT) mass spectrometry (MS). After enzymatic digestion and reduction of the resulting muropeptides, the complex glycopeptide mixture was separated and fractionated by reversed-phase high-performance liquid chromatography. Prior to mass spectrometric analysis, the muropeptide samples were subjected to a desalting step and an aliquot was taken for amino acid analysis. Initial molecular mass determination of these peptidoglycan fragments (ranging from monomeric to tetrameric muropeptides) was performed by positive and negative ion MALDI-MS using the thin-layer technique with the matrix alpha-cyano-4-hydroxycinnamic acid. The results demonstrated that for the fast molecular mass determination of large sample numbers in the 0.8-10 pmol range and with a mass accuracy of +/-0.07%, negative ion MALDI-MS in the linear TOF mode is the method of choice. After this kind of muropeptide screening often a detailed primary structural analysis is required owing to ambiguous data. Structural data could be obtained from peptidoglycan monomers by post-source decay (PSD) fragment ion analysis, but not from dimers or higher oligomers and not with the necessary sensitivity. Multistage collision-induced dissociation (CID) experiments performed on an nESI-QIT instrument were found to be the superior method for structural characterization of not only monomeric but also of dimeric and trimeric muropeptides. Up to MS4 experiments were sometimes necessary to obtain unambiguous structural information. Three examples are presented: (a) CID MSn (n = 2-4) of a peptidoglycan monomer (disaccharide-tripeptide) isolated from B. subtilis (wild type, vegetative cell form), (b) CID MSn (n = 2-4) of a peptidoglycan dimer (bis-disaccharide-tetrapentapeptide) obtained from a B. subtilis mutant (vegetative cell form) and (c) CID MS2 of a peptidoglycan trimer (a linear hexasaccharide with two peptide side chains) isolated from the spore cortex of B. megaterium. All MS(n) experiments were performed on singly charged precursor ions and the MS2 spectra were dominated by fragments derived from interglycosidic bond cleavages. MS3 and MS4 spectra exhibited mainly peptide moiety fragment ions. In case of the bis-disaccharide-tetrapentapeptide, the peptide branching point could be determined based on MS3 and MS4 spectra. The results demonstrate the utility of nESI-QIT-MS towards the facile determination of the glycan sequence, the peptide linkage and the peptide sequence and branching of purified muropeptides (monomeric up to trimeric forms). The wealth of structural information generated by nESI-QIT-MSn is unsurpassed by any other individual technique.

Identification and molecular analysis of PcsB, a protein required for cell wall separation of group B streptococcus

Group B streptococcus (GBS) is the leading cause of bacterial sepsis and meningitis in neonates. N-terminal sequencing of major proteins in the culture supernatant of a clinical isolate of GBS identified a protein of about 50 kDa which could be detected in all of 27 clinical isolates tested. The corresponding gene, designated pcsB, was isolated from a GBS cosmid library and subsequently sequenced. The deduced PcsB polypeptide consists of 447 amino acid residues (M(r), 46,754), carries a potential N-terminal signal peptide sequence of 25 amino acids, and shows significant similarity to open reading frames of unknown function from different organisms and to the murein hydrolase P45 from Listeria monocytogenes. Northern blot analysis revealed a monocistronic transcriptional organization for pcsB in GBS. Insertional inactivation of pcsB in the genome of GBS resulted in mutant strain Sep1 exhibiting a drastically reduced growth rate compared to the parental GBS strain and showing an increased susceptibility to osmotic pressure and to various antibiotics. Electron microscopic analysis of GBS mutant Sep1 revealed growth in clumps, cell separation in several planes, and multiple division septa within single cells. These data suggest a pivotal role of PcsB for cell division and antibiotic tolerance of GBS.

Autolysis of dairy leuconostocs and detection of peptidoglycan hydrolases by renaturing SDS-PAGE

The autolysis of lactic acid bacteria plays a major role during cheese ripening. The aim of this study was to evaluate the autolytic properties and peptidoglycan hydrolase content of dairy leuconostocs. Autolysis of 59 strains of dairy Leuconostoc was examined under starvation conditions in potassium phosphate buffer. The ability of dairy leuconostocs to lyse is strain dependant and not related to the species. The peptidoglycan hydrolase profile of Leuc. mesenteroides subsp. mesenteroides 10L was analysed by renaturing gel electrophoresis. Two major activity bands migrating at 41 and 52 kDa were observed. According to the specificity analysis, strain 10L seems to contain a glycosidase and an N-acetyl-muramyl-L-alanine amidase, or an endopeptidase. The peptidoglycan hydrolase profiles of various Leuconostoc species were also compared. Several peptidoglycan hydrolase activities could be detected in the different Leuconostoc species. Further characterization of the peptidoglycan hydrolases will help to control autolysis of leuconostocs in cheese.

Molecular characterization of the beta-N-acetylglucosaminidase of Escherichia coli and its role in cell wall recycling

The beta-N-acetylglucosaminidase of Escherichia coli was found to have a novel specificity and to be encoded by a gene (nagZ) that maps at 25.1 min. It corresponds to an open reading frame, ycfO, whose predicted amino acid sequence is 57% identical to that of Vibrio furnissii ExoII. NagZ hydrolyzes the beta-1,4 glycosidic bond between N-acetylglucosamine and anhydro-N-acetylmuramic acid in cell wall degradation products following their importation into the cell during the process for recycling cell wall muropeptides. From amino acid sequence comparisons, the novel beta-N-acetylglucosaminidase appears to be conserved in all 12 gram-negative bacteria whose complete or partial genome sequence data are available.

Analysis of genetic elements controlling Staphylococcus aureus lrgAB expression: potential role of DNA topology in SarA regulation

Penicillin-induced killing and murein hydrolase activity in Staphylococcus aureus are dependent on a variety of regulatory elements, including the LytSR two-component regulatory system and the virulence factor regulators Agr and Sar. The LytSR effects on these processes can be explained, in part, by the recent finding that a LytSR-regulated operon, designated lrgAB, affects murein hydrolase activity and penicillin tolerance. To examine the regulation of lrgAB expression in greater detail, we performed Northern blot and promoter fusion analyses. Both methods revealed that Agr and Sar, like LytSR, positively regulate lrgAB expression. A mutation in the agr locus reduced lrgAB expression approximately sixfold, while the sar mutation reduced lrgAB expression to undetectable levels. cis-acting regulatory elements involved in lrgAB expression were identified by fusing various fragments of the lrgAB promoter region to the xylE reporter gene and integrating these constructs into the chromosome. Catechol 2,3-dioxygenase assays identified DNA sequences, including an inverted repeat and intrinsic bend sites, that contribute to maximal lrgAB expression. Confirmation of the importance of the inverted repeat was achieved by demonstrating that multiple copies of the inverted repeat reduced lrgAB promoter activity, presumably by titrating out a positive regulatory factor. The results of this study demonstrate that lrgAB expression responds to a variety of positive regulatory factors and suggest that specific DNA topology requirements are important for optimal expression.

Requirement of autolytic activity for bacteriocin-induced lysis

The bacteriocin produced by Lactococcus lactis IFPL105 is bactericidal against several Lactococcus and Lactobacillus strains. Addition of the bacteriocin to exponential-growth-phase cells resulted in all cases in bacteriolysis. The bacteriolytic response of the strains was not related to differences in sensitivity to the bacteriocin and was strongly reduced in the presence of autolysin inhibitors (Co(2+) and sodium dodecyl sulfate). When L. lactis MG1363 and its derivative deficient in the production of the major autolysin AcmA (MG1363acmADelta1) were incubated with the bacteriocin, the latter did not lyse and no intracellular proteins were released into the medium. Incubation of cell wall fragments of L. lactis MG1363, or of L. lactis MG1363acmADelta1 to which extracellular AcmA was added, in the presence or absence of the bacteriocin had no effect on the speed of cell wall degradation. This result indicates that the bacteriocin does not degrade cell walls, nor does it directly activate the autolysin AcmA. The autolysin was also responsible for the observed lysis of L. lactis MG1363 cells during incubation with nisin or the mixture of lactococcins A, B, and M. The results presented here show that lysis of L. lactis after addition of the bacteriocins is caused by the resulting cell damage, which promotes uncontrolled degradation of the cell walls by AcmA.

Accumulation of an artificial cell wall-binding lipase by Bacillus subtilis wprA and/or sigD mutants

A recombinant lipase, CWB-LipB, localized on the Bacillus subtilis cell surface and retaining lipase activity was unstable and not accumulated in a high yield. To improve the accumulation, we examined cell wall binding protease (wprA)- and/or sigma D (sigD)-deficient mutants, and also a NprE and AprA protease-deficient mutant as host strains. The nprE aprA mutation did not lead to a significant increase in the CWB-LipB accumulation. The wprA mutant accumulated a greater amount than the wild-type only in the stationary phase, but the sigD mutant accumulated a greater amount in both the exponential and stationary phases. The double mutant exhibited great accumulation of CWB-LipB, the amount being 36% of the total proteins extracted from the cell surface.

Mur1, a Streptococcus thermophilus peptidoglycan hydrolase devoid of a specific cell wall binding domain

The gene encoding Mur1, a Streptococcus thermophilus peptidoglycan hydrolase, was cloned by homology with acmA, the Lactococcus lactis major autolysin gene. Mur1 is a 24.7-kDa protein endowed with a putative signal peptide. Sequence analysis evidenced that Mur1 encompasses exactly the AcmA region containing the catalytic domain, but lacks the one containing amino acid repeats involved in cell wall binding. Mur1 appears to be expressed and cell-associated in S. thermophilus, as revealed by immunoblot analysis. These results suggest that the cell wall attachment mode of Mur1 differs from that of most peptidoglycan hydrolases described so far.

Investigation of the relationship between lysogeny and lysis of Lactococcus lactis in cheese using prophage-targeted PCR

The ability of lactococcal strains to lyse (and release intracellular enzymes) during cheese manufacture can be a very desirable trait and has been associated with improvement in flavor and acceleration of cheese ripening. Using a laboratory-scale cheese manufacturing assay, the autolytic behavior of 31 strains of Lactococcus lactis was assessed. In general, marked variation was observed between strains with a 20-fold difference between the best and worst lysing strains based on the release of the intracellular enzyme lactate dehydrogenase. In a parallel experiment, the genomes of these strains were examined for the presence of prophage integrase (int) sequences by using conserved primer sequences from known lysogenic phage. Results demonstrated that the lytic behavior of lactococcal starter strains significantly correlates with the presence of prophage sequences. These results highlight not only the contribution of prophage to starter cell lysis but also the potential of PCR as a useful initial screen to assess strains for this important industrial trait.

The Staphylococcus aureus lrgAB operon modulates murein hydrolase activity and penicillin tolerance

Previous studies in our laboratory have shown that the Staphylococcus aureus LytSR two-component regulatory system affects murein hydrolase activity and autolysis. A LytSR-regulated dicistronic operon has also been identified and shown to encode two potential membrane-associated proteins, designated LrgA and LrgB, hypothesized to be involved in the control of murein hydrolase activity. In the present study, a lrgAB mutant strain was generated and analyzed to test this hypothesis. Zymographic and quantitative analysis of murein hydrolase activity revealed that the lrgAB mutant produced increased extracellular murein hydrolase activity compared to that of the wild-type strain. Complementation of the lrgAB defect by providing the lrgAB genes in trans restored the wild-type phenotype, indicating that these genes confer negative control on extracellular murein hydrolase activity. In addition to these effects, the influence of the lrgAB mutation on penicillin-induced lysis and killing was examined. These studies demonstrated that the lrgAB mutation enhanced penicillin-induced killing of cells approaching the stationary phase of growth, the time at which the lrgAB operon was shown to be maximally expressed. This effect of the lrgAB mutation on penicillin-induced killing was shown to be independent of cell lysis. In contrast, the lrgAB mutation did not affect penicillin-induced killing of cells growing in early-exponential phase, a time in which lrgAB expression was shown to be minimal. However, expression of the lrgAB operon in early-exponential-phase cells inhibited penicillin-induced killing, again independent of cell lysis. The data generated by this study suggest that penicillin-induced killing of S. aureus involves a novel regulator of murein hydrolase activity.

Acceleration of hyaluronidase production in the course of batch cultivation of Clostridium perfringens can be achieved with bacteriolytic enzymes

As Clostridium perfringens hyaluronidase has cell-bound enzyme features, an enzymatic approach has been designed to facilitate the release of hyaluronidase into culture through increasing the clostridial cell wall permeability. As a result of the application of lytic peptidase from Actinomyces rutgersensis, beta-N-acetylglucosaminidase and beta-N-acetylmuramidase (both from Bacillus subtilis) commercially available preparations at the end of the producer's exponential growth phase, a 5.3-, 4.8- and 4.0-fold acceleration, respectively (but no enhancement), of hyaluronidase production in the course of batch cultivation of Cl. perfringens has been achieved. This also resulted in an approximately 10-fold reduction in undesirable side lecithinase activity irrespective of the bacteriolytic enzyme preparation used.

The Streptococcus thermophilus autolytic phenotype results from a leaky prophage

Streptococcus thermophilus autolytic strains are characterized by a typical bell-shaped growth curve when grown under appropriate conditions. The cellular mechanisms involved in the triggering of lysis and the bacteriolytic activities of these strains were investigated in this study. Lactose depletion and organic solvents (ethanol, methanol, and chloroform) were shown to trigger a premature and immediate lysis of M17 exponentially growing cells. These factors and compounds are suspected to act by altering the cell envelope properties, causing either the permeabilization (organic solvents) or the depolarization (lactose depletion) of the cytoplasmic membrane. The autolytic character was shown to be associated with lysogeny. Phage particles, most of which were defective, were observed in the culture supernatants after both mitomycin C-induced and spontaneous lysis. By renaturing sodium dodecyl sulfate-polyacrylamide gel electrophoresis, a bacteriolytic activity was detected at 31 kDa exclusively in the autolytic strains. This enzyme was detected during both growth and spontaneous lysis with the same intensity. We have shown that it was prophage encoded and homologous to the endolysin Lyt51 of the streptococcal temperate bacteriophage phi01205 (M. Sheehan, E. Stanley, G. F. Fitzgerald, and D. van Sinderen, Appl. Environ. Microbiol. 65:569-577, 1999). It appears from our results that the autolytic properties are conferred to the S. thermophilus strains by a leaky prophage but do not result from massive prophage induction. More specifically, we propose that phagic genes are constitutively expressed in almost all the cells at a low and nonlethal level and that lysis is controlled and achieved by the prophage-encoded lysis proteins.

Purification and partial characterization of a murein hydrolase, millericin B, produced by Streptococcus milleri NMSCC 061

Streptococcus milleri NMSCC 061 was screened for antimicrobial substances and shown to produce a bacteriolytic cell wall hydrolase, termed millericin B. The enzyme was purified to homogeneity by a four-step purification procedure that consisted of ammonium sulfate precipitation followed by gel filtration, ultrafiltration, and ion-exchange chromatography. The yield following ion-exchange chromatography was 6.4%, with a greater-than-2,000-fold increase in specific activity. The molecular weight of the enzyme was 28,924 as determined by electrospray mass spectrometry. The amino acid sequences of both the N terminus of the enzyme (NH(2) SENDFSLAMVSN) and an internal fragment which was generated by cyanogen bromide cleavage (NH(2) SIQTNAPWGL) were determined by automated Edman degradation. Millericin B displayed a broad spectrum of activity against gram-positive bacteria but was not active against Bacillus subtilis W23 or Escherichia coli ATCC 486 or against the producer strain itself. N-Dinitrophenyl derivatization and hydrazine hydrolysis of free amino and free carboxyl groups liberated from peptidoglycan digested with millericin B followed by thin-layer chromatography showed millericin B to be an endopeptidase with multiple activities. It cleaves the stem peptide at the N terminus of glutamic acid as well as the N terminus of the last residue in the interpeptide cross-link of susceptible strains.

Interference with murein turnover has no effect on growth but reduces beta-lactamase induction in Escherichia coli

Physiological studies of a mutant of Escherichia coli lacking the three lytic transglycosylases Slt70, MltA, and MltB revealed that interference with murein turnover can prevent AmpC beta-lactamase induction. The triple mutant, although growing normally, shows a dramatically reduced rate of murein turnover. Despite the reduction in the formation of low-molecular-weight murein turnover products, neither the rate of murein synthesis nor the amount of murein per cell was increased. This might be explained by assuming that during growth in the absence of the major lytic transglycosylases native murein strands are excised by the action of endopeptidases and directly reused without further breakdown to muropeptides. The reduced rate of murein turnover could be correlated with lowered cefoxitin-induced expression of beta-lactamase, present on a plasmid carrying the ampC and ampR genes from Enterobacter cloacae. Overproduction of MltB stimulated beta-lactamase induction, whereas specific inhibition of Slt70 by bulgecin repressed ampC expression. Thus, specific inhibitors of lytic transglycosylases can increase the potency of penicillins and cephalosporins against bacteria inducing AmpC-like beta-lactamases.

Characterization of a new sigma-K-dependent peptidoglycan hydrolase gene that plays a role in Bacillus subtilis mother cell lysis

Bacillus subtilis produces a 30-kDa peptidoglycan hydrolase, CwlH, during the late sporulation phase. Disruption of yqeE led to a complete loss of CwlH formation, indicating the identity of yqeE with cwlH. Northern blot analysis of cwlH revealed a 0.8-kb transcript after 6 to 7.5 h for the wild-type strain but not for the sigma(F), sigma(E), sigma(G), and sigma(K) mutants. Expression of the sigma(K)-dependent cwlH gene depended on gerE. Primer extension analysis also suggested that cwlH is transcribed by Esigma(K) RNA polymerase. CwlH produced in Escherichia coli harboring a cwlH plasmid is an N-acetylmuramoyl-L-alanine amidase (EC 3.5.1.28) and exhibited an optimum pH of 7.0 and high-level binding to the B. subtilis cell wall. A cwlC cwlH double mutation led to a lack of mother cell lysis even after 7 days of incubation in DSM medium, but the single mutations led to mother cell lysis after 24 h.

The molecular characterization of the first autolytic lysozyme of Streptococcus pneumoniae reveals evolutionary mobile domains

A biochemical approach to identify proteins with high affinity for choline-containing pneumococcal cell walls has allowed the localization, cloning and sequencing of a gene (lytC ) coding for a protein that degrades the cell walls of Streptococcus pneumoniae. The lytC gene is 1506 bp long and encodes a protein (LytC) of 501 amino acid residues with a predicted M r of 58 682. LytC has a cleavable signal peptide, as demonstrated when the mature protein (about 55 kDa) was purified from S. pneumoniae. Biochemical analyses of the pure, mature protein proved that LytC is a lysozyme. Combined cell fractionation and Western blot analysis showed that the unprocessed, primary product of the lytC gene is located in the pneumococcal cytoplasm whereas the processed, active form of LytC is tightly bound to the cell envelope. In vivo experiments demonstrated that this lysozyme behaves as a pneumococcal autolytic enzyme at 30 degrees C. The DNA region encoding the 253 C-terminal amino acid residues of LytC has been cloned and expressed in Escherichia coli. The truncated protein exhibits a low, but significant, choline-independent lysozyme activity, which suggests that this polypeptide adopts an active conformation. Self-alignment of the N-terminal part of the deduced amino acid sequence of LytC revealed the presence of 11 repeated motifs. These results strongly suggest that the lysozyme reported here has changed the general building plan characteristic of the choline-binding proteins of S. pneumoniae and its bacteriophages, i.e. the choline-binding domain and the catalytic domain are located, respectively, at the N-terminal and the C-terminal moieties of LytC. This work illustrates the natural versatility exhibited by the pneumococcal genes coding for choline-binding proteins to fuse separated catalytic and substrate-binding domains and create new and functional mature proteins.

Peptidoglycan hydrolase LytF plays a role in cell separation with CwlF during vegetative growth of Bacillus subtilis

Peptidoglycan hydrolase, LytF (CwlE), was determined to be identical to YhdD (deduced cell wall binding protein) by zymography after insertional inactivation of the yhdD gene. YhdD exhibits high sequence similarity with CwlF (PapQ, LytE) and p60 of Listeria monocytogenes. The N-terminal region of YhdD has a signal sequence followed by five tandem repeated regions containing polyserine residues. The C-terminal region corresponds to the catalytic domain, because a truncated protein without the N-terminal region retained cell wall hydrolase activity. The histidine-tagged LytF protein produced in Escherichia coli cells hydrolyzed the linkage of D-gamma-glutamyl-meso-diaminopimelic acid in murein peptides, indicating that it is a D,L-endopeptidase. Northern hybridization and primer extension analyses indicated that the lytF gene was transcribed by EsigmaD RNA polymerase. Disruption of lytF led to slightly filamentous cells, and a lytF cwlF double mutant exhibited extraordinary microfiber formation, which is similar to the cell morphology of the cwlF sigD mutant.

Peptidoglycan-hydrolyzing activity of the FlgJ protein, essential for flagellar rod formation in Salmonella typhimurium

Because the rod structure of the flagellar basal body crosses the inner membrane, the periplasmic space, and the outer membrane, its formation must involve hydrolysis of the peptidoglycan layer. So far, more than 10 genes have been shown to be required for rod formation in Salmonella typhimurium. Some of them encode the component proteins of the rod structure, and most of the remaining genes are believed to encode proteins involved in the export process of the component proteins. Although FlgJ has also been known to be involved in rod formation, its exact role has not been understood. Recently, it was suggested that the C-terminal half of the FlgJ protein has homology to the active center of some muramidase enzymes from gram-positive bacteria. In this study, we showed that the purified FlgJ protein from S. typhimurium has a peptidoglycan-hydrolyzing activity and that this activity is localized in its C-terminal half. Through oligonucleotide-directed mutagenesis, we constructed flgJ mutants with amino acid substitutions in the putative active center of the muramidase. The resulting mutants produced FlgJ proteins with reduced enzymatic activity and showed poor motility. These results indicate that the muramidase activity of FlgJ is essential for flagellar formation. Immunoblotting analysis with the fractionated cell extracts revealed that FlgJ is exported to the periplasmic space, where the peptidoglycan layer is localized. On the basis of these results, we conclude that FlgJ is the flagellum-specific muramidase which hydrolyzes the peptidoglycan layer to assemble the rod structure in the periplasmic space.

Surface proteins of gram-positive bacteria and mechanisms of their targeting to the cell wall envelope

The cell wall envelope of gram-positive bacteria is a macromolecular, exoskeletal organelle that is assembled and turned over at designated sites. The cell wall also functions as a surface organelle that allows gram-positive pathogens to interact with their environment, in particular the tissues of the infected host. All of these functions require that surface proteins and enzymes be properly targeted to the cell wall envelope. Two basic mechanisms, cell wall sorting and targeting, have been identified. Cell well sorting is the covalent attachment of surface proteins to the peptidoglycan via a C-terminal sorting signal that contains a consensus LPXTG sequence. More than 100 proteins that possess cell wall-sorting signals, including the M proteins of Streptococcus pyogenes, protein A of Staphylococcus aureus, and several internalins of Listeria monocytogenes, have been identified. Cell wall targeting involves the noncovalent attachment of proteins to the cell surface via specialized binding domains. Several of these wall-binding domains appear to interact with secondary wall polymers that are associated with the peptidoglycan, for example teichoic acids and polysaccharides. Proteins that are targeted to the cell surface include muralytic enzymes such as autolysins, lysostaphin, and phage lytic enzymes. Other examples for targeted proteins are the surface S-layer proteins of bacilli and clostridia, as well as virulence factors required for the pathogenesis of L. monocytogenes (internalin B) and Streptococcus pneumoniae (PspA) infections. In this review we describe the mechanisms for both sorting and targeting of proteins to the envelope of gram-positive bacteria and review the functions of known surface proteins.

GC-MS analysis of diaminopimelic acid stereoisomers and amino acid enantiomers in rumen bacteria

The amounts and the configuration of the stereoisomers of 2,6-diaminopimelic acid (Dap) and the enantiomeric content of other amino acids were determined in five individual species (Fibrobacter succinogenes, Streptococcus bovis, Selenomonas ruminantium, Prevotella ruminicola and Anaerovibrio lipolytica) of rumen bacteria, and in samples of mixed rumen bacteria isolated from sheep. The separation and quantification of the Dap stereoisomers was achieved by gas chromatography (GC) of trifluoroacetyl 2-propyl esters on a Chirasil-L-Val fused silica column, and detection was achieved by selected ion monitoring mass spectrometry (SIM-MS). No isomers of Dap were detected in S. bovis and P. ruminicola, two of the bacterial isolates. LL- and DD-Dap were not detected in any of the bacterial samples. As only the meso-isomer of Dap was detected in these microorganisms, it was quantified by adding LL-Dap as an internal standard before the bacteria were acid-hydrolyzed. Amounts of between 4.8 and 12.0 mg meso-Dap per gram of bacterial dry matter (DM) were determined. The presence in the rumen bacteria of free amino acid enantiomers, extractable with 70% aqueous ethanol, were determined by GC-SIM-MS; the D-amino acids were predominantly Ala, Asp and Glu, but there was considerable variation between the species.

Peptidoglycan fine structure of the radiotolerant bacterium Deinococcus radiodurans Sark

Peptidoglycan from Deinococcus radiodurans was analyzed by high-performance liquid chromatography and mass spectrometry. The monomeric subunit was: N-acetylglucosamine-N-acetylmuramic acid-L-Ala-D-Glu-(gamma)-L-Orn-[(delta)Gly-Gly]-D-Ala-D-Ala. Cross-linkage was mediated by (Gly)2 bridges, and glycan strands were terminated in (1-->6)anhydro-muramic acid residues. Structural relations with the phylogenetically close Thermus thermophilus are discussed.

Staphylococcal cell wall: morphogenesis and fatal variations in the presence of penicillin

The primary goal of this review is to provide a compilation of the complex architectural features of staphylococcal cell walls and of some of their unusual morphogenetic traits including the utilization of murosomes and two different mechanisms of cell separation. Knowledge of these electron microscopic findings may serve as a prerequisite for a better understanding of the sophisticated events which lead to penicillin-induced death. For more than 50 years there have been controversial disputes about the mechanisms by which penicillin kills bacteria. Many hypotheses have tried to explain this fatal event biochemically and mainly via bacteriolysis. However, indications that penicillin-induced death of staphylococci results from overall biochemical defects or from a fatal attack of bacterial cell walls by bacteriolytic murein hydrolases were not been found. Rather, penicillin, claimed to trigger the activity of murein hydrolases, impaired autolytic wall enzymes of staphylococci. Electron microscopic investigations have meanwhile shown that penicillin-mediated induction of seemingly minute cross wall mistakes is the very reason for this killing. Such "morphogenetic death" taking place at predictable cross wall sites and at a predictable time is based on the initiation of normal cell separations in those staphylococci in which the completion of cross walls had been prevented by local penicillin-mediated impairment of the distribution of newly synthesized peptidoglycan; this death occurs because the high internal pressure of the protoplast abruptly kills such cells via ejection of some cytoplasm during attempted cell separation. An analogous fatal onset of cell partition is considered to take place without involvement of a detectable quantity of autolytic wall enzymes ("mechanical cell separation"). The most prominent feature of penicillin, the disintegration of bacterial cells via bacteriolysis, is shown to represent only a postmortem process resulting from shrinkage of dead cells and perturbation of the cytoplasmic membrane. Several schematic drawings have been included in this review to facilitate an understanding of the complex morphogenetic events.

Expression analysis of the autolysin gene (atl) of Staphylococcus aureus

The bifunctional autolysin gene (atl) of Staphylococcus aureus was transcribed into a 4.1-kb transcript. The transcription initiation site was located at an adenine residue 33-nt upstream from the putative atl start codon. Analysis using a promoter-reporter plasmid showed that promoter activity increased during the exponential growth phase. The Tn551 insertion site of the autolysis-deficient mutant S. aureus RUSAL2 was located in the putative catalytic region of the glucosaminidase domain.