The human epidermis models EpiSkin, SkinEthic and EpiDerm: an evaluation of morphology and their suitability for testing phototoxicity, irritancy, corrosivity, and substance transport

A topical treatment containing heat-treated Lactobacillus johnsonii NCC 533 reduces Staphylococcus aureus adhesion and induces antimicrobial peptide expression in an in vitro reconstructed human epidermis model

Staphylococcus aureus colonization is thought to contribute to the pathophysiology of atopic dermatitis (AD). AD patients exhibit reduced levels of cutaneous antimicrobial peptides (AMPs), which may explain their increased susceptibility to infections. Using an in vitro reconstructed human epidermis (RHE) model, we sought to determine whether topical application of a non-replicating probiotic, heat-treated Lactobacillus johnsonii NCC 533 (HT La1), could inhibit S. aureus adhesion to skin and boost cutaneous innate immunity. We found that application of HT La1 suspension to RHE samples reduced the binding of radiolabelled S. aureus by up to 74%. To investigate a potential effect of HT La1 on innate immunity, we analysed the expression of nine AMP genes, including those encoding beta defensins and S100 proteins, following topical application of HT La1 in suspension or in a daily moisturizer lotion. Analysed genes were induced by up to fourfold in a dose-dependent manner by HT La1 in suspension and by up to 2.4-fold by HT La1 in the moisturizer lotion. Finally, using ELISA and immunohistochemical detection, we evaluated the expression and secretion of the AMPs hBD-2 and psoriasin and determined that both proteins were induced by topical HT La1, particularly in the stratum corneum of the RHE. These findings demonstrate that a topically applied, non-replicating probiotic can modulate endogenous AMP expression and inhibit binding of S. aureus to an RHE model in vitro. Moreover, they suggest that a topical formulation containing HT La1 could benefit atopic skin by enhancing cutaneous innate immunity and reducing S. aureus colonization.

Bioengineering the microanatomy of human skin

Recreating the structure of human tissues in the laboratory is valuable for fundamental research, testing interventions, and reducing the use of animals. Critical to the use of such technology is the ability to produce tissue models that accurately reproduce the microanatomy of the native tissue. Current artificial cell-based skin systems lack thorough characterisation, are not representative of human skin, and can show variation. In this study, we have developed a novel full thickness model of human skin comprised of epidermal and dermal compartments. Using an inert porous scaffold, we created a dermal construct using human fibroblasts that secrete their own extracellular matrix proteins, which avoids the use of animal-derived materials. The dermal construct acts as a foundation upon which epidermal keratinocytes were seeded and differentiated into a stratified keratinised epithelium. In-depth morphological analyses of the model demonstrated very close similarities with native human skin. Extensive immunostaining and electron microscopy analysis revealed ultrastructural details such as keratohyalin granules and lamellar bodies within the stratum granulosum, specialised junctional complexes, and the presence of a basal lamina. These features reflect the functional characteristics and barrier properties of the skin equivalent. Robustness and reproducibility of in vitro models are important attributes in experimental practice, and we demonstrate the consistency of the skin construct between different users. In summary, a new model of full thickness human skin has been developed that possesses microanatomical features reminiscent of native tissue. This skin model platform will be of significant interest to scientists researching the structure and function of human skin.

Synchrotron FTIR Micro-spectroscopy Studies Demonstrate the Release of Ceramide Molecules from a Ceramide-containing UV-curable Acrylic Adhesive Resin

A recent study has shown that the addition of ceramide to adhesive materials of medical sheets or tapes improves or maintains skin barrier functions despite the irritation and damage caused by the repeated removal of the sheet or tape. This fact may imply that ceramide molecules are released from the adhesive material and penetrate the skin. In this study, we investigated whether ceramide molecules are released from a UV-curable acrylic adhesive resin (acResin^®) sheet containing ceramide molecules attached to a cultured skin sample by estimating the local ceramide concentration from the data obtained by synchrotron Fourier transform infrared micro-spectroscopy analysis. Since section samples of uniform thickness could not be prepared, the intensity data of the amide I peak originating from ceramide were normalized by using the intensity data of the ester peak originating from the resin matrix. This analysis enabled the quantification of the change in local ceramide concentrations in the sheet samples. This result indicates that ceramide molecules were released from the acResin^® sheet attached to the cultured skin sheet.

Histological and functional comparisons of four anatomical regions of porcine skin with human abdominal skin

Because of the shortage of human skin for research purposes, porcine skin has been used as a model of human skin. The aim of this study was to identify the region of German Landrace pig skin that could be used as the best possible substitute for human abdominal skin. Porcine samples were collected from the ear, flank, back and caudal abdomen; human abdominal skin samples were excised during plastic surgery. Histological and ultrastructural assessments were carried out on the epidermis and dermis, with emphasis on the dermo-epidermal interface length, dermo-epidermal thickness ratio as well as densities of; hair follicles, arrector pili muscles, blood vessels and sweat glands. In the pig, the barrier function of the four anatomical regions was assessed. Results showed that both histologically and ultrastructurally, all four regions of porcine skin were similar to human skin. These include the shapes of keratinocytes, structure of cell contacts and presence of Weibel Palade bodies in endothelial cells. Other parameters such as the thickness of epidermis, the thickness of stratum basale, spinosum and granulosum and the number of cell layers in the stratum corneum were similar in human abdominal and in all four regions of porcine skin. However, there were also significant differences especially in the thickness of the stratum corneum, the dermo-epidermal interface length and the blood vessel density.

Sample Treatment for Tissue Proteomics in Cancer, Toxicology, and Forensics

Since the birth of proteomics science in the 1990, the number of applications and of sample preparation methods has grown exponentially, making a huge contribution to the knowledge in life science disciplines. Continuous improvements in the sample treatment strategies unlock and reveal the fine details of disease mechanisms, drug potency, and toxicity as well as enable new disciplines to be investigated such as forensic science.This chapter will cover the most recent developments in sample preparation strategies for tissue proteomics in three areas, namely, cancer, toxicology, and forensics, thus also demonstrating breath of application within the domain of health and well-being, pharmaceuticals, and secure societies.In particular, in the area of cancer (human tumor biomarkers), the most efficient and multi-informative proteomic strategies will be covered in relation to the subsequent application of matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI) and liquid extraction surface analysis (LESA), due to their ability to provide molecular localization of tumor biomarkers albeit with different spatial resolution.With respect to toxicology, methodologies applied in toxicoproteomics will be illustrated with examples from its use in two important areas: the study of drug-induced liver injury (DILI) and studies of effects of chemical and environmental insults on skin, i.e., the effects of irritants, sensitizers, and ionizing radiation. Within this chapter, mainly tissue proteomics sample preparation methods for LC-MS/MS analysis will be discussed as (i) the use of LC-MS/MS is majorly represented in the research efforts of the bioanalytical community in this area and (ii) LC-MS/MS still is the gold standard for quantification studies.Finally, the use of proteomics will also be discussed in forensic science with respect to the information that can be recovered from blood and fingerprint evidence which are commonly encountered at the scene of the crime. The application of proteomic strategies for the analysis of blood and fingerprints is novel and proteomic preparation methods will be reported in relation to the subsequent use of mass spectrometry without any hyphenation. While generally yielding more information, hyphenated methods are often more laborious and time-consuming; since forensic investigations need quick turnaround, without compromising validity of the information, the prospect to develop methods for the application of quick forensic mass spectrometry techniques such as MALDI-MS (in imaging or profiling mode) is of great interest.

The Collagen Suprafamily: From Biosynthesis to Advanced Biomaterial Development

Collagen is the oldest and most abundant extracellular matrix protein that has found many applications in food, cosmetic, pharmaceutical, and biomedical industries. First, an overview of the family of collagens and their respective structures, conformation, and biosynthesis is provided. The advances and shortfalls of various collagen preparations (e.g., mammalian/marine extracted collagen, cell-produced collagens, recombinant collagens, and collagen-like peptides) and crosslinking technologies (e.g., chemical, physical, and biological) are then critically discussed. Subsequently, an array of structural, thermal, mechanical, biochemical, and biological assays is examined, which are developed to analyze and characterize collagenous structures. Lastly, a comprehensive review is provided on how advances in engineering, chemistry, and biology have enabled the development of bioactive, 3D structures (e.g., tissue grafts, biomaterials, cell-assembled tissue equivalents) that closely imitate native supramolecular assemblies and have the capacity to deliver in a localized and sustained manner viable cell populations and/or bioactive/therapeutic molecules. Clearly, collagens have a long history in both evolution and biotechnology and continue to offer both challenges and exciting opportunities in regenerative medicine as nature's biomaterial of choice.

A comparison of the in vitro permeation of niacinamide in mammalian skin and in the Parallel Artificial Membrane Permeation Assay (PAMPA) model

The in vitro skin penetration of pharmaceutical or cosmetic ingredients is usually assessed in human or animal tissue. However, there are ethical and practical difficulties associated with sourcing these materials; variability between donors may also be problematic when interpreting experimental data. Hence, there has been much interest in identifying a robust and high throughput model to study skin permeation that would generate more reproducible results. Here we investigate the permeability of a model active, niacinamide (NIA), in (i) conventional vertical Franz diffusion cells with excised human skin or porcine skin and (ii) a recently developed Parallel Artificial Membrane Permeation Assay (PAMPA) model. Both finite and infinite dose conditions were evaluated in both models using a series of simple NIA solutions and one commercial preparation. The Franz diffusion cell studies were run over 24 h while PAMPA experiments were conducted for 2.5 h. A linear correlation between both models was observed for the cumulative amount of NIA permeated in tested models under finite dose conditions. The corresponding correlation coefficients (r²) were 0.88 for porcine skin and 0.71 for human skin. These results confirm the potential of the PAMPA model as a useful screening tool for topical formulations. Future studies will build on these findings and expand further the range of actives investigated.

Xenobiotica-metabolizing enzymes in the skin of rat, mouse, pig, guinea pig, man, and in human skin models

Studies on the metabolic fate of medical drugs, skin care products, cosmetics and other chemicals intentionally or accidently applied to the human skin have become increasingly important in order to ascertain pharmacological effectiveness and to avoid toxicities. The use of freshly excised human skin for experimental investigations meets with ethical and practical limitations. Hence information on xenobiotic-metabolizing enzymes (XME) in the experimental systems available for pertinent studies compared with native human skin has become crucial. This review collects available information of which—taken with great caution because of the still very limited data—the most salient points are: in the skin of all animal species and skin-derived in vitro systems considered in this review cytochrome P450 (CYP)-dependent monooxygenase activities (largely responsible for initiating xenobiotica metabolism in the organ which provides most of the xenobiotica metabolism of the mammalian organism, the liver) are very low to undetectable. Quite likely other oxidative enzymes [e.g. flavin monooxygenase, COX (cooxidation by prostaglandin synthase)] will turn out to be much more important for the oxidative xenobiotic metabolism in the skin. Moreover, conjugating enzyme activities such as glutathione transferases and glucuronosyltransferases are much higher than the oxidative CYP activities. Since these conjugating enzymes are predominantly detoxifying, the skin appears to be predominantly protected against CYP-generated reactive metabolites. The following recommendations for the use of experimental animal species or human skin in vitro models may tentatively be derived from the information available to date: for dermal absorption and for skin irritation esterase activity is of special importance which in pig skin, some human cell lines and reconstructed skin models appears reasonably close to native human skin. With respect to genotoxicity and sensitization reactive-metabolite-reducing XME in primary human keratinocytes and several reconstructed human skin models appear reasonably close to human skin. For a more detailed delineation and discussion of the severe limitations see the Conclusions section in the end of this review.

Bioengineering of a Full-Thickness Skin Equivalent in a 96-Well Insert Format for Substance Permeation Studies and Organ-On-A-Chip Applications

The human skin is involved in protecting the inner body from constant exposure to outer environmental stimuli. There is an evident need to screen for toxicity and the efficacy of drugs and cosmetics applied to the skin. To date, animal studies are still the standard method for substance testing, although they are currently controversially discussed Therefore, the multi-organ chip is an attractive alternative to replace animal testing. The two-organ chip is designed to hold 96-well cell culture inserts (CCIs). Small-sized skin equivalents are needed for this. In this study, full-thickness skin equivalents (ftSEs) were generated successfully inside 96-well CCIs. These skin equivalents developed with in vivo-like histological architecture, with normal differentiation marker expressions and proliferation rates. The 96-well CCI-based ftSEs were successfully integrated into the two-organ chip. The permeation of fluorescein sodium salt through the ftSEs was monitored during the culture. The results show a decreasing value for the permeation over time, which seems a promising method to track the development of the ftSEs. Additionally, the permeation was implemented in a computational fluid dynamics simulation, as a tool to predict results in long-term experiments. The advantage of these ftSEs is the reduced need for cells and substances, which makes them more suitable for high throughput assays.

Toward Immunocompetent 3D Skin Models

3D human skin models provide a platform for toxicity testing, biomaterials evaluation, and investigation of fundamental biological processes. However, the majority of current in vitro models lack an inflammatory system, vasculature, and other characteristics of native skin, indicating scope for more physiologically complex models. Looking at the immune system, there are a variety of cells that could be integrated to create novel skin models, but to do this effectively it is also necessary to understand the interface between skin biology and tissue engineering as well as the different roles the immune system plays in specific health and disease states. Here, a progress report on skin immunity and current immunocompetent skin models with a focus on construction methods is presented; scaffold and cell choice as well as the requirements of physiologically relevant models are elaborated. The wide range of technological and fundamental challenges that need to be addressed to successfully generate immunocompetent skin models and the steps currently being made globally by researchers as they develop new models are explored. Induced pluripotent stem cells, microfluidic platforms to control the model environment, and new real-time monitoring techniques capable of probing biochemical processes within the models are discussed.

Exploration of alternative test methods to evaluate phototoxicity of ophthalmic agents by using Statens Seruminstitut Rabbit Cornea cell lines and 3D human reconstituted cornea models

Many chemicals have been reported to induce phototoxicity. The absorbance of light energy within the sunlight range is a common characteristic of phototoxicity. The 3T3 NRU phototoxicity test (PT) in 3T3 mouse skin fibroblasts has been used to identify the phototoxic potential induced by excited chemicals after exposure to ultra violet (UV). However, as phototoxicity may occur in ocular cells, it is necessary to develop a more suitable test for cornea-derived cells. In this study, we attempted to establish a new in vitro PT method in rabbit corneal cell lines (SIRC). We evaluated five ophthalmic agents, ciprofloxacin, levofloxacin, lomefloxacin, norfloxacin, and tetracycline, for their cytotoxic potential and in vitro phototoxicity. The results obtained using 3D human corneal models revealed that the UV-induced eye tissue toxicity by the test substances showed good correlation with those obtained using the in vitro phototoxicity test. However, the results from the 3D PT for ciprofloxacin, norfloxacin, and tetracycline in the 3D human cornea model were only partially comparable. Therefore, we suggest the SIRC cell line as a new phototoxicity test model; however, a sequential testing strategy, such as 3D PT, was also proposed to obtain relevant information for topical eye agents.

Adhesion and relaxation of a soft elastomer on surfaces with skin like roughness

For designing new skin adhesives, the complex mechanical interaction of soft elastomers with surfaces of various roughnesses needs to be better understood. We systematically studied the effects of a wide set of roughness characteristics, film thickness, hold time and material relaxation on the adhesive behaviour of the silicone elastomer SSA 7-9800 (Dow Corning). As model surfaces, we used epoxy replicas obtained from substrates with roughness ranging from very smooth to skin-like. Our results demonstrate that films of thin and intermediate thickness (60 and 160 µm) adhered best to a sub-micron rough surface, with a pull-off stress of about 50 kPa. Significant variations in pull-off stress and detachment mechanism with roughness and hold time were found. In contrast, 320 µm thick films adhered with lower pull-off stress of about 17 kPa, but were less sensitive to roughness and hold time. It is demonstrated that the adhesion performance of the silicone films to rough surfaces can be tuned by tailoring the film thickness and contact time.

Confocal Raman spectroscopic imaging for in vitro monitoring of active ingredient penetration and distribution in reconstructed human epidermis model

Topically applied active cosmetic ingredients (ACI) or active pharmaceutical ingredients (API) efficacy is directly related to their efficiency of penetration in the skin. In vitro reconstructed human epidermis surrogate models offer in vivo like skin samples for transdermal studies. Using Delipidol®, an ACI currently used in the cosmetics industry, the capabilities to deliver accurate distribution maps and penetration profiles of this molecule by means of confocal Raman spectroscopic imaging have been demonstrated. Using a non-negative constrained least squares (NCLS) approach, contribution of specific molecules can be estimated at each point of spectral maps in order to deliver semi-quantitative heat maps representing the ACI levels in the different skin layers. The concentration profiles obtained are approximately single exponential for all 3 time points evaluated, with a consistent decay constant, which is independent of the sublayer structure. Notably, however, there is no significant penetration into the lower basal layers until a critical concentration is built up, after 3 hours. Combination of Raman confocal imaging with spectral unmixing methods such as NCLS is demonstrated to be a relevant approach for in vitro biological evaluation of cosmetic and pharmaceutical active ingredients and could easily be implemented as a screening tool for industrial use.

Human Organotypic Models for Anti-infective Research

The use of human organotypic models for biomedical research is experiencing a significant increase due to their biological relevance, the possibility to perform high-throughput analyses, and their cost efficiency. In the field of anti-infective research, comprising the search for novel antipathogenic treatments including vaccines, efforts have been made to reduce the use of animal models. That is due to two main reasons: unreliability of data obtained with animal models and the increasing willingness to reduce the use of animals in research for ethical reasons. Human three-dimensional (3-D) models may substitute and/or complement in vivo studies, to increase the translational value of preclinical data. Here, we provide an overview of recent studies utilizing human organotypic models, resembling features of the cervix, intestine, lungs, brain, and skin in the context of anti-infective research. Furthermore, we focus on the future applications of human skin models and present methodological protocols to culture human skin equivalents and human skin explants.

[Study on feasibility of HaCaT epidermal model as an alternative to skin irritation in vitro]

Objective

To construct the epidermal model with HaCaT cells and evaluate the feasibility of this model as an in vitro skin irritation test tool.

Methods

The HaCaT model was reconstructed with HaCaT cells by adoption gas-liquid surface culture technique, and the EpiKutis ^® model was reconstructed with human epidermal keratinocytes by the same techinique as control. Morphology changes of HaCaT and EpiKutis ^® models were observed by HE staining. Barrier function assessment was performed with penetration test. According to Organization for Economic Cooperation and Development (OECD) Test Guideline 439, the surface of the HaCaT and the EpiKutis ^® models were treated with 20 chemicals for 30 minutes, incubated for 42 hours, and determined tissue viability by MTT assay, to evaluate the irritation of chemicals. Then the results were compared with the irritation of chemicals with the United Nations Globally Harmonized System of Classification and Labelling of Chemicals (UN GHS) system and validated reference method (VRM) for the classification of chemical, and evaluated the feasibility of this model as an in vitro skin irritation test tool.

Results

The results of HE staining showed that there was no complete stratified structure in the HaCaT model. The results of barrier function showed that the ET ₅₀ was 0.99 hours. The results of skin irritation of chemicals showed that the sensitivity was 100% and 100%, the specificity was 50% and 70%, and the accuracy rate was 75% and 85% for HaCaT model and EpiKutis ^® model respectively.

Conclusion

The epidermal model of HaCaT cells does not possess the complete epidermal physiological structure, the barrier function as ET ₅₀ of the HaCaT model is lower than EpiKutis ^® model, the chemicals in vitro skin irritation test results do not meet the OECD criteria for the determination of stimulants, so the HaCaT model is not suitable as a replacement tool in vitro to determine the chemicals skin irritation.

Carcinogenic potential of sanguinarine, a phytochemical used in 'therapeutic' black salve and mouthwash

Black salves are escharotic skin cancer therapies in clinical use since the mid 19th century. Sanguinaria canadensis, a major ingredient of black salve formulations, contains a number of bioactive phytochemicals including the alkaloid sanguinarine. Despite its prolonged history of clinical use, conflicting experimental results have prevented the carcinogenic potential of sanguinarine from being definitively determined. Sanguinarine has a molecular structure similar to known polyaromatic hydrocarbon carcinogens and is a DNA intercalator. Sanguinarine also generates oxidative and endoplasmic reticulum stress resulting in the unfolded protein response and the formation of 8-hydroxyguanine genetic lesions. Sanguinarine has been the subject of contradictory in vitro and in vivo genotoxicity and murine carcinogenesis test results that have delayed its carcinogenic classification. Despite this, epidemiological studies have linked mouthwash that contains sanguinarine with the development of oral leukoplakia. Sanguinarine is also proposed as an aetiological agent in gallbladder carcinoma. This literature review investigates the carcinogenic potential of sanguinarine. Reasons for contradictory genotoxicity and carcinogenesis results are explored, knowledge gaps identified and a strategy for determining the carcinogenic potential of sanguinarine especialy relating to black salve are discussed. As patients continue to apply black salve, especially to skin regions suffering from field cancerization and skin malignancies, an understanding of the genotoxic and carcinogenic potential of sanguinarine is of urgent clinical relevance.

Automated transepithelial electrical resistance measurements of the EpiDerm reconstructed human epidermis model

Understanding the effect of exogenous substances on human skin is critical for toxicology assessment. To address this, numerous artificial models of the topmost layer of human skin, so-called reconstructed human epidermis (RhE), have been created in an attempt to produce a clear analogue for testing. Unfortunately, current testing modalities still rely on endpoint assays and are not capable of monitoring time-resolved changes in barrier function without using numerous redundant samples. In this work, a novel, time-resolved approach is realized by monitoring the transepithelial electrical resistance (TEER) of MatTek EpiDerm® reconstructed human epidermis model, utilizing an automated protocol with the Intelligent Mobile Lab for in vitro diagnostics (IMOLA-IVD).

Comparative assessment of local tolerance of alcohols commonly used in alcohol-based hand rubs for hand hygiene

Hand hygiene plays a key role in nosocomial infection prevention. To achieve users' adherence, products' dermal tolerance is essential. We aimed at making a comparative assessment of skin irritation and phototoxicity of the 3 alcohols commonly used in alcohol-based hand rubs (Ethanol, Propan-2-ol, Propan-1-ol) at 60, 70, 80 or 85% w/w in water or with co-formulates (hydrating, emollient and skin protective agents). In vitro validated OECD methods 439 and 432 were used. For irritation, EpiSkin™ Small Model was the chosen Reconstructed Human Epidermis (RhE). For phototoxicity, co-formulates alone or in mixture with and without alcohol were tested using BALB/c 3T3 cell cultures. Whilst Ethanol and Propan-2-ol could not be differentiated and displayed good skin tolerance profiles, Propan-1-ol based products lead to significant viability impairments of RhE at 60, 70 or 80% and at 60% in the presence of co-formulates. However, these results could not be reproduced in another RhE model. Taking also into account bibliographic data on Propan-1-ol, this suggests that our results are probably related to a lack of specificity of the used RhE. Therefore, it can be relevant in case of significant results to use two different RhE models before performing any classification and/or performing any complementary tests.

Skin regeneration in three dimensions, current status, challenges and opportunities

Skin regeneration is a life-saving need for many patients, whom list is stretched from burn victims to motor-car accidents. Spraying cells, either keratinocytes or stem cells, were associated with variable results and, in many cases, unfavorable outcomes. As the spatial configuration of the skin is distinctive, many trials investigated the bio-printing or the construction of three dimensional skin models where different layers of the skin were preserved. Although some of these models showed the histological configuration of the skin, their acceptance by the wound was questionable as a consequence of delayed vascularization. In this mini-review, different models for three dimensional regeneration of the skin will be discussed with their main points of strength and challenges as well as their possible opportunities.

Protective effects of Polypodium leucotomos extract against UVB-induced damage in a model of reconstructed human epidermis

BACKGROUND

Polypodium leucotomos (PL) exerts potent antioxidant, photo-protective, and immune-modulatory activities. A reconstructed human epidermis (RHE) (Episkin) is a suitable model for the evaluation of acute UV-induced cell damage. No data regarding the photo-protective action of PL in this model are available.

PURPOSE

We evaluated the effects of PL on the prevention of UVB-induced cell damage assessing sunburn cells, CPD formation, p53, Ki-67, p21 expression, and epidermal growth factor (EGF) production.

MATERIALS & METHODS

RHE was incubated in standard conditions. PL was topically applied at the concentration of 2 mg/cm² , immediately before UVB exposition. UVB exposition (300 mJ/cm² ) was performed using a dedicated UVB lamp. Irradiated samples without PL and non-irradiated samples were used as positive and negative controls. Expression of p53, p21, and Ki-67 was evaluated with immune-histochemical methods. CPD were measured using a monoclonal antibody.

RESULTS

PL significantly reduced sunburned cells (-80%) in comparison with positive control. PL significantly prevented the increase in EGF production at tested times. PL significantly reduced the p53 (-80%), p21 (-84%), and Ki-67 (-48%) positive cells. Finally, PL prevented the formation of CPD (0% vs. 20% positive cells).

CONCLUSION

In this model, PL has shown to prevent UVB cell damage, the upregulation of proliferating proteins, and fully blocking the formation of CPD.

Measurement of cytotoxicity and irritancy potential of sugar-based surfactants on skin-related 3D models

Sugar-based surfactants present surface-active properties and relatively low cytotoxicity. They are often considered as safe alternatives to currently used surfactants in cosmetic industries. In this study, four sugar-based surfactants, each with an eight carbon alkyl chain bound to a glucose or a maltose headgroup through an amide linkage, were synthesized and compared to two standard surfactants. The cytotoxic and irritant effects of surfactants were evaluated using two biologically relevant models: 3D dermal model (mouse fibroblasts embedded in collagen gel) and reconstituted human epidermis (RHE, multi-layered human keratinocytes). Results show that three synthesized surfactants possess lower cytotoxicity compared to standard surfactants as demonstrated in the 3D dermal model. Moreover, the IC50s of surfactants against the 3D dermal model are higher than IC50s obtained with the 2D dermal model (monolayer mouse fibroblasts). Both synthesized and standard surfactants show no irritant effects after 48h of topical application on RHE. Throughout the study, we demonstrate the difficulty to link the physico-chemical properties of surfactants and their cytotoxicity in complex models. More importantly, our data suggest that, prior to in vivo tests, a complete understanding of surfactant cytotoxicity or irritancy potential requires a combination of cellular and tissue models.

Efficacy, Safety and Targets in Topical and Transdermal Active and Excipient Delivery

A key requirement for topical and transdermal active delivery is the effective delivery of an active to a desired target site, to achieve both safe and efficacious outcomes. This chapter seeks to explore the importance of the pharmacological, toxicological and therapeutic properties of actives and excipients, as well as the site of action as complementary components in percutaneous absorption. This is crucial for optimized topical and transdermal product design.

Skin integrated with perfusable vascular channels on a chip

This paper describes a method for fabricating perfusable vascular channels coated with endothelial cells within a cultured skin-equivalent by fixing it to a culture device connected to an external pump and tubes. A histological analysis showed that vascular channels were constructed in the skin-equivalent, which showed a conventional dermal/epidermal morphology, and the endothelial cells formed tight junctions on the vascular channel wall. The barrier function of the skin-equivalent was also confirmed. Cell distribution analysis indicated that the vascular channels supplied nutrition to the skin-equivalent. Moreover, the feasibility of a skin-equivalent containing vascular channels as a model for studying vascular absorption was demonstrated by measuring test molecule permeation from the epidermal layer into the vascular channels. The results suggested that this skin-equivalent can be used for skin-on-a-chip applications including drug development, cosmetics testing, and studying skin biology.

Skin-on-a-chip model simulating inflammation, edema and drug-based treatment

Recent advances in microfluidic cell cultures enable the construction of in vitro human skin models that can be used for drug toxicity testing, disease study. However, current in vitro skin model have limitations to emulate real human skin due to the simplicity of model. In this paper, we describe the development of ‘skin-on-a-chip’ to mimic the structures and functional responses of the human skin. The proposed model consists of 3 layers, on which epidermal, dermal and endothelial components originated from human, were cultured. The microfluidic device was designed for co-culture of human skin cells and each layer was separated by using porous membranes to allow interlayer communication. Skin inflammation and edema were induced by applying tumor necrosis factor alpha on dermal layer to demonstrate the functionality of the system. The expression levels of proinflammatory cytokines were analyzed to illustrate the feasibility. In addition, we evaluated the efficacy of therapeutic drug testing model using our skin chip. The function of skin barrier was evaluated by staining tight junctions and measuring a permeability of endothelium. Our results suggest that the skin-on-a-chip model can potentially be used for constructing in vitro skin disease models or for testing the toxicity of cosmetics or drugs.

Skin Diseases Modeling using Combined Tissue Engineering and Microfluidic Technologies

In recent years, both tissue engineering and microfluidics have significantly contributed in engineering of in vitro skin substitutes to test the penetration of chemicals or to replace damaged skins. Organ-on-chip platforms have been recently inspired by the integration of microfluidics and biomaterials in order to develop physiologically relevant disease models. However, the application of organ-on-chip on the development of skin disease models is still limited and needs to be further developed. The impact of tissue engineering, biomaterials and microfluidic platforms on the development of skin grafts and biomimetic in vitro skin models is reviewed. The integration of tissue engineering and microfluidics for the development of biomimetic skin-on-chip platforms is further discussed, not only to improve the performance of present skin models, but also for the development of novel skin disease platforms for drug screening processes.

In vitro models for evaluating safety and efficacy of novel technologies for skin drug delivery

For preclinical testing of novel therapeutics, predictive in vitro models of the human skin are required to assess efficacy, absorption and safety. Simple as well as more sophisticated three-dimensional organotypic models of the human skin emerged as versatile and powerful tools simulating healthy as well as diseased skin states. Besides addressing the demands of research and industry, such models serve as valid alternative to animal testing. Recently, the acceptance of several models by regulatory authorities corroborates their role as important building block for preclinical development. However, valid assessment of readout parameters derived from these models requires suitable analytical techniques. Standard analytical methods are mostly destructive and limited regarding in-depth investigation on molecular level. The combination of adequate in vitro models with modern non-invasive analytical modalities bears a great potential to address important skin drug delivery related questions. Topics of interest are for instance the assessment of repeated dosing effects and xenobiotic biotransformation, which cannot be analyzed by destructive techniques. This review provides a comprehensive overview of current in vitro skin models differing in functional complexity and mimicking healthy as well as diseased skin states. Further, benefits and limitations regarding analytical evaluation of efficacy, absorption and safety of novel drug carrier systems applied to such models are discussed along with a prospective view of anticipated future directions. In addition, emerging non-invasive imaging modalities are introduced and their significance and potential to advance current knowledge in the field of skin drug delivery is explored.

Three-dimensional bioprinting speeds up smart regenerative medicine

Biological materials can actively participate in the formation of bioactive organs and can even control cell fate to form functional tissues that we name as the smart regenerative medicine (SRM). The SRM requires interdisciplinary efforts to finalize the pre-designed organs. Three-dimensional (3D) printing, as an additive manufacturing technology, has been widely used in various fields due to its high resolution and individuation. In SRM, with the assistance of 3D printing, cells and biomaterials could be precisely positioned to construct complicated tissues. This review summarizes the state of the SRM advances and focuses in particular on the 3D printing application in biofabrication. We further discuss the issues of SRM development and finally propose some approaches for future 3D printing, which involves SRM.

Polymeric membranes modulate human keratinocyte differentiation in specific epidermal layers

In vitro models of human bioengineered skin substitutes are an alternative to animal experimentation for testing the effects and toxicity of drugs, cosmetics and pollutants. For the first time specific and distinct human epidermal strata were engineered by using membranes and keratinocytes. To this purpose, biodegradable membranes of chitosan (CHT), polycaprolactone (PCL) and a polymeric blend of CHT-PCL were prepared by phase-inversion technique and characterized in order to evaluate their morphological, physico-chemical and mechanical properties. The capability of membranes to modulate keratinocyte differentiation inducing specific interactions in epidermal membrane systems was investigated. The overall results demonstrated that the membrane properties strongly influence the cell morpho-functional behaviour of human keratinocytes, modulating their terminal differentiation, with the creation of specific epidermal strata or a fully proliferative epidermal multilayer system. In particular, human keratinocytes adhered on CHT and CHT-PCL membranes, forming the structure of the epidermal top layers, such as the corneum and granulosum strata, characterized by withdrawal or reduction from the cell cycle and cell proliferation. On the PCL membrane, keratinocytes developed an epidermal basal lamina, with high proliferating cells that stratified and migrated over time to form a complete differentiating epidermal multilayer system.

In vitro models to estimate drug penetration through the compromised stratum corneum barrier

OBJECTIVES

The phospholipid vesicle-based permeation assay (PVPA) is a recently established in vitro stratum corneum model to estimate the permeability of intact and healthy skin. The aim here was to further evolve this model to mimic the stratum corneum in a compromised skin barrier by reducing the barrier functions in a controlled manner.

METHODS

To mimic compromised skin barriers, PVPA barriers were prepared with explicitly defined reduced barrier function and compared with literature data from both human and animal skin with compromised barrier properties. Caffeine, diclofenac sodium, chloramphenicol and the hydrophilic marker calcein were tested to compare the PVPA models with established models.

RESULTS AND DISCUSSIONS

The established PVPA models mimicking the stratum corneum in healthy skin showed good correlation with biological barriers by ranking drugs similar to those ranked by the pig ear skin model and were comparable to literature data on permeation through healthy human skin. The PVPA models provided reproducible and consistent results with a distinction between the barriers mimicking compromised and healthy skin. The trends in increasing drug permeation with an increasing degree of compromised barriers for the model drugs were similar to the literature data from other in vivo and in vitro models.

CONCLUSIONS

The PVPA models have the potential to provide permeation predictions when investigating drugs or cosmeceuticals intended for various compromised skin conditions and can thus possibly reduce the time and cost of testing as well as the use of animal testing in the early development of drug candidates, drugs and cosmeceuticals.

A review of the current state of the art of physiologically-based tests for measuring human dermal in vitro bioavailability of polycyclic aromatic hydrocarbons (PAH) in soil

Polycyclic Aromatic Hydrocarbons are classed as Persistent Organic Pollutants, a large group of compounds that share similar characteristics. They are lipophilic, resistant to degradation in the environment and harmful to human and environmental health. Soil has been identified as the primary reservoir for Polycyclic Aromatic Hydrocarbons in the United Kingdom. This study reviews the literature associated with, or is relevant to, the measurement and modelling of dermal absorption of Polycyclic Aromatic Hydrocarbons from soils. The literature illustrates the use of in vivo, in vitro and in silico methods from a wide variety of scientific disciplines including occupational and environmental exposure, medical, pharmaceutical and cosmetic research and associated mathematical modelling. The review identifies a number of practical shortcomings which must be addressed if dermal bioavailability tests are to be applied to laboratory analysis of contaminated soils for human health risk assessment.

In Vitro Skin Models and Their Predictability in Defining Normal and Disease Biology, Pharmacology, and Toxicity

In vitro skin model systems are increasingly being used both in the early evaluation of therapeutic drug candidates and in confirmatory mechanistic studies. The most commonly used of these in vitro model systems are reconstituted human epidermis (RHE) models. These RHE models consist solely of epidermal keratinocytes, which comes with some limitations but also with the advantage of focusing toxicologic and pharmacologic evaluation on keratinocytes alone. RHE models can generally be implemented more quickly, easily, and reproducibly than in vivo models and can thus be used for high throughput compound screening while potentially reducing the need for animal studies. Histologic evaluation of RHE sections can be done quite easily, and the sections are very amenable to quantification via image analysis, including automated analysis. RHE model systems can provide very valuable early indications of therapeutic candidate biology, pharmacology, and toxicity; and early results have demonstrated that RHE models have been quite predictive for in vivo pharmacologic and toxicologic effects on the skin, including clinical skin toxicity.

Beyond 3D culture models of cancer

The mechanisms underlying the spatiotemporal evolution of tumor ecosystems present a challenge in evaluating drug efficacy. In this Perspective, we address the use of three-dimensional in vitro culture models to delineate the dynamic interplay between the tumor and the host microenvironment in an effort to attain realistic platforms for assessing pharmaceutical efficacy in patients.

The influence of microemulsion structure on their skin irritation and phototoxicity potential

The purpose of this study was to examine skin irritation and phototoxicity potentials of several microemulsions (ME), all comprising approximately the same percentage of surfactant mixture, but varying oil/water content and consequently inner structure being either droplet-like (o/w ME, o/w ME carbomer, w/o ME and w/o ME white wax) or lamellar (gel-like ME). Two different in vitro methods were used: MTT assay (performed either on reconstructed human epidermis (RHE) or NCTC 2544 cells) and pig ear test. Neither assay revealed the difference among ME with droplet-like structure. Then again, pig ear test and MTT assay performed on RHE indicated that gel-like ME is more irritant compared to other tested ME, whereas no difference among formulations were observed by MTT assay on NCTC 2544 cells. The reasonable explanation is destruction and consequently uniform structure of ME upon dilution that is inevitable for testing on cell cultures. The results of phototoxicity test again indicated the increased potential of gel-like ME to cause adverse effects on skin. It can be concluded that for ME consisting of the same amount of identical surfactants but having different structure the latter represent a crucial factor that determines their dermal toxicity.

Immunohistochemical distribution of neuropeptide Y, peptide YY, pancreatic polypeptide-like immunoreactivity and their receptors in the epidermal skin of healthy women

Few studies have suggested that neuropeptide Y (NPY) could play an important role in skin functions. However, the expression of NPY, the related peptides, peptide YY (PYY) and pancreatic polypeptide (PP) and their receptors have not been investigated in human skin. Using specific antisera directed against NPY, PYY, PP and the Y1, Y2, Y4 and Y5 receptor subtypes, we investigated here the expression of these markers. NPY-like immunoreactivity (ir) in the epidermal skin could not be detected. For the first time we report the presence of positive PP-like ir immunofluorescent signals in epidermal cells, i.e. keratinocytes of skin from three areas (abdomen, breast and face) obtained as surgical left-overs. The immunofluorescent signal of PP-like ir varies from very low to high level in all three areas. In contrast, PYY-like ir is only expressed in some cells and with varied level of intensity. Furthermore and for the first time we observed specific Y1 and Y4 receptor-like ir in all epidermal layers, while the Y2 and Y5 subtypes were absent. Interestingly, as seen in human epidermis, in Episkin, a reconstituted human epidermal layer, we detected the presence of PP-like as well as Y1-like and Y4-like ir. These data have shown the presence and distribution of PYY, PP and Y1 and Y4 receptors in the human skin and Episkin, suggesting possible novel roles of NPY related peptides and their receptors in skin homeostasis.