Progress and Trends in AIE-Based Bioprobes: A Brief Overview

Fluorescent nanorods based on 9,10-distyrylanthracene (DSA) derivatives for efficient and long-term bioimaging

Fluorescent nanoparticles based on 9,10-distyrylanthracene (DSA) derivatives (4,4'-((1E,1'E)-anthracene-9,10-diylbis(ethene-2,1-diyl))bis(N,N-dimethylaniline) (NDSA) and 4,4'-((1E,1'E)-anthracene-9,10-diylbis(ethene-2,1-diyl))dibenzonitrile (CNDSA)) were prepared using an ultrasound aided nanoprecipitation method. The morphologies of the fluorescent nanoparticles could be controlled by adjusting the external ultrasonication time. NDSA or CNDSA could form spherical nanodots (NDSA NDs, CNDSA NDs) in a THF-H2O mixture with an 80% or 70% water fraction when the ultrasonication time was 30 s. When the ultrasonication time was prolonged to 10 min, NDSA and CNDSA could assemble into nanorods (NDSA NRs, CNDSA NRs). Meanwhile, the sizes of NDSA NRs and CNDSA NRs could be controlled by adjusting the water content in the mixture. As the water fraction was increased from 60% to 80%, the sizes of NDSA and CNDSA nanorods or nanodots reduced from 238.4 nm to 140.3 nm, and 482 nm to 198.4 nm, respectively. When the water fraction was up to 90%, irregular morphologies of NDSA and CNDSA could be observed. The nanoparticles exhibited intense fluorescence emission, good anti-photobleaching properties, as well as excellent stability and biocompatibility. In vitro cell imaging experiments indicated that the nanorods prepared by this simple method had the potential to be used for efficient and noninvasive long-term bioimaging.

Progress and trends of photodynamic therapy: From traditional photosensitizers to AIE-based photosensitizers

Photodynamic therapy (PDT) is an established clinical treatment technology which utilizes excitation light of a specific wavelength to activate photosensitizers (PSs) to generate reactive oxygen species (ROS), which leads to cancer cell death. Over the past decades of PDT research, progress have been made in the development of PSs. However, many inherent characteristics of traditional PSs have caused various problems in PDT, such as low treatment efficiency at aggregation state and shallow treatment depth. In solution to these problems, aggregation-induced emission (AIE)-based PSs have been reported in recent years. Here, this article reviews the design strategy and the biomedical applications of AIE PSs in detail, which begins with a summary of traditional PSs for a comparison between traditional PSs and AIE PSs. Subsequently, the different functional AIE PSs in photodynamic cancer cells ablation and image-guided therapy are discussed in detail taking controllable excitation wavelength, stimulus response and PDT/photothermal therapy synergistic effect as examples. These studies have demonstrated the great potential of AIE PSs as effective theranostic agents. And the review provides references for the development of new PSs and hopefully spur research interest in AIE PSs for future clinical application.

Ultrasound lighting up AIEgens for potential surgical navigation

Multifunctional contrast-enhanced agents suitable for application in surgical navigation by taking advantage of the merits of their diverse imaging modalities at different surgical stages are highly sought-after. Herein, an amphipathic polymer composed of aggregation-induced emission fluorogens (AIEgens) and Gd³⁺ chelates was successfully synthesized and assembled into ultrasound responsive microbubbles (AIE-Gd MBs) to realize potential tri-modal contrast-enhanced ultrasound (US) imaging, magnetic resonance imaging (MRI), and AIEgen-based fluorescence imaging (FI) during the perioperative period. Through ultrasound targeted microbubble destruction (UTMD) and cavitation effect, the as-prepared AIE-Gd MBs went through a MBs-to-nanoparticles (NPs) conversion, which not only resulted in targeted accumulation in tumor tissues but also led to stronger fluorescence being exhibited due to the more aggregated AIE-Gd molecules in the NPs. As a proof-of-concept, our work proposes a strategy of US-lit-up AIEgens in tumors which could offer a simple and powerful tool for surgical navigation in the future.

Lipase sensing by naphthalene diimide based fluorescent organic nanoparticles: a solvent induced manifestation of self-assembly

The precise control of supramolecular self-assembly is gaining utmost interest for the demanding applications of manifested nano-architecture across the scientific domain. This study delineates the morphological transformation of naphthalene diimide (NDI) derived amphiphiles with varying water content in dimethyl sulfoxide (DMSO) and the selective sensing of lipase using its aggregation-induced emission (AIE) properties. To this end, NDI-based, benzyl alcohol protected alkyl chain (C1, C5, and C10) linked amphiphilic molecules (NDI-1,2,3) were synthesized. Among the synthesized amphiphiles, benzyl ester linked C5 tailored naphthalene diimide (NDI-2) exhibited AIE with an emission maximum at 490 nm in a DMSO-water binary solvent system from fw = 30% and above water content. The fibrous morphology of NDI-2 at fw = 30% got gradually transformed to spherical aggregated particles along with steady increment in the emission intensity upon increasing the amount of water in DMSO. At fw = 99% water in DMSO, complete transformation to fluorescent organic nanoparticles (FONPs) was observed. Microscopic and spectroscopic techniques demonstrated the solvent driven morphological transformation and the AIE property of NDI-2. Moreover, this AIE of NDI-2 FONPs was employed in the selective turn-off sensing of lipase against many other enzymes including esterase, through hydrolysis of a benzyl ester linkage with a limit of detection 10.0 ± 0.8 μg L-1. The NDI-2 FONP also exhibited its lipase sensing efficiency in vitro using a human serum sample.

Aptamer Generated by Cell-SELEX for Specific Targeting of Human Glioma Cells

The most prevalent primary brain tumors are gliomas, which start in the glial cells. Although there have been significant technological advances in surgery and radio-chemotherapy, the prognosis and survival of patients with malignant gliomas remain poor. For routine diagnosis of glioma, computed tomography and magnetic resonance imaging primarily depend on anatomical changes and fail to detect the cellular changes that occur early in the development of malignant gliomas. Therefore, it is urgent to find effective molecular diagnostic tools to detect early stages of malignant gliomas. Currently, cell-based Systematic Evolution of Ligands by EXponential enrichment (cell-SELEX) technology is one effective tool to obtain DNA or RNA aptamers capable of differentiating the molecular signatures among different types of cell lines. Using cell-SELEX, we generated and characterized an aptamer, termed S6-1b, that can distinguish the molecular differences between glioma cell line SHG44 and human astrocytes. Under the conditions of 4 and 37 °C, respectively, the dissociation constants of aptamer-cell interaction were both measured in the low nanomolar range. The aptamer S6-1b also exhibited excellent selectivity, making it suitable for use in a complex biological environment. Furthermore, the aptamer can effectively target glioma cells for in vivo fluorescence imaging of tumors. The target type of aptamer S6-1b was identified as a cell membrane protein. Our work indicates that aptamer S6-1b has diagnostic and therapeutic potential to specifically deliver imaging or therapeutic agents to malignant gliomas.

Green-, Red-, and Infrared-Emitting Polymorphs of Sterically Hindered Push-Pull Substituted Stilbenes

The synthesis, XRD single-crystal structure, powder XRD, and solid-state fluorescence of two new DPA-DPS-EWG derivatives (DPA=diphenylamino, DPS=2,5-diphenyl-stilbene, EWG=electron-withdrawing group, that is, carbaldehyde or dicyanovinylene, DCV) are described. Absorption and fluorescence maxima in solvents of various polarity show bathochromic shifts with respect to the parent DPA-stilbene-EWGs. The electronic coupling in dimers and potential twist elasticity of monomers were studied by density functional theory. Both polymorphs of the CHO derivative emit green fluorescence (527 and 550 nm) of moderate intensity (10 % and 5 %) in polycrystalline powder form. Moderate (5 %) red (672 nm) monomer-like emission was also observed for the first polymorph of the DCV derivative, whereas more intense (32 %) infrared (733 nm) emission of the second polymorph was ascribed to the excimer fluorescence.

Solid-Supported Amplification of Aggregation Emission: A Tetraphenylethylene-Cucurbit[6]uril@Hydroxyapatite-Based Supramolecular Sensing Assembly for the Detection of Spermine and Spermidine in Human Urine and Blood

The development of sensitive and selective tools for the detection and quantification of biomarkers is important in the diagnosis and treatment of clinical diseases. Spermine (SP) and spermidine (SPD) act as biomarkers for early-stage diagnosis of cancer in humans as their increased levels in urine are indicative of abnormal biological processes associated with this fatal disease. In this study, we introduced a strategy for solid-supported amplification of the effective aggregation-induced-emission (AIE) effect of a water-soluble tetraphenylethylene (TPE)-based probe in developing a supramolecular sensing platform for the rapid, sensitive, and selective detection of SP and SPD in water. The nonemissive TPE derivative (TPEHP) forms a less emissive conjugate with hydroxyl cucurbit[6]uril (CB[6]OH) in water, which undergoes several-fold enhancement of effective emission upon electrostatic interaction with the solid surface of hydroxyapatite nanoparticles (HAp NPs), dispersed in the aqueous media. The corresponding three-component supramolecular assembly disrupts by the intrusion of SP and SPD in the CB[6] portal because of the stronger binding ability with CB[6], resulting in a turn-off fluorescence sensor for SP and SPD with enhanced sensitivity. The assembly-disassembly-based sensing mechanism was thoroughly demonstrated by carrying out isothermal titration calorimetry (ITC), spectroscopic, and microscopic experiments. The sensing system showed low limits of detection (LODs) of 1.4 × 10^-8 and 3.6 × 10^-8 M for SP and SPD, respectively, which are well below the required range for the early diagnosis of cancer. Besides, a good linear relationship was obtained for both SP and SPD. Nominal interference from various metal ions, anions, common chemicals, amino acids, and other biogenic amines makes this sensing platform suitable for the real-time, low-level measurement of spermine (and spermidine) in human urinary and blood samples.

Efficient Emission of Ultraviolet Light by Solid State Organic Fluorophores: Synthesis and Characterization of 1,4-Dialkeny-2,5-dioxybenzenes

The design and development of organic luminophores that exhibit efficient ultraviolet (UV) fluorescence in the solid state remains underexplored. Here, we report that 1,4-dialkenyl-2,5-dialkoxybenzenes and 1,4-dialkenyl-2,5-disiloxybenzenes act as such UV-emissive fluorophores. The dialkenyldioxybenzenes were readily prepared in three steps from 2,5-dimethoxy-1,4-diacetylbenzene or 2,5-dimethoxy-1,4-diformylbenzene via two to four steps from 1,4-bis(diethoxyphosphonylmethyl)-2,5-dimethoxybenzene. The dialkenyldioxybenzenes emit UV light in solution (λ_em =350-387 nm) and in the solid state (λ_em =328-388 nm). In addition, the quantum yields in the solid state were generally higher than those in solution. In particular, the adamantylidene-substituted benzenes fluoresced in the UV region with high quantum yields (Φ=0.37-0.55) in the solid state. Thin films of poly(methyl methacrylate) doped with the adamantylidene-substituted benzenes also exhibited UV emission with good efficiency (Φ=0.27-0.45). Density functional theory calculations revealed that the optical excitation of the dialkenyldimethoxybenzenes involves intramolecular charge-transfer from the ether oxygen atoms to the twisted alkenyl-benzene-alkenyl moiety, whereas the dialkenylbis(triphenylsiloxy)benzenes were optically excited through intramolecular charge-transfer from the oxygen atoms and twisted π-system to the phenyl-Si moieties of each triphenylsilyl group.

Dual-emission fluorescence biosensing of vancomycin based on AIEgen-peptide conjugates and aptamer-modified Au nanoclusters

Precise doses of antibiotics are necessary to prevent bacterial drug resistance. Although fluorescent sensors are promising for quantitative analyses of antibiotics, improvements in feasibility, selectivity, and sensitivity are needed. In this study, a dual-emission fluorescence biosensor platform was developed for simple, selective, and sensitive determination of vancomycin (Van) based on a peptide conjugated with blue-emitting aggregation-induced emission luminogens (AIEgen) and aptamer-modified red-emitting gold nanoclusters (AuNCs-apt). The peptide and aptamer together recognized Van with high affinity, thus changing the fluorescence intensity at 470 nm and 650 nm, respectively. This platform displayed excellent linear correlation between the fluorescence response and a Van concentration ranging 0.01-100 μg mL^-1, and the limit of detection (LOD) was 2.79 ng mL^-1. In addition to the ability to accurately distinguish Van from glycopeptide antibiotics, the newly developed biosensor allowed for naked-eye detection of 1 μg mL^-1 Van. These results and those of serum samples and microdialysate samples support the application of this newly developed method for Van monitoring and clinical diagnosis.

Recent advances in bioanalytical methods to measure proteome stability in cells

This review summarizes recent bioanalytical methods for measuring and profiling protein stability in cells on a proteome-wide scale, which can provide insights for proteostasis and associated diseases.

A “turn-on” fluorescent sensor for cytosine in aqueous media based on diamino-bridged biphenyl acrylonitrile

A “turn-on” fluorescent sensor for cytosine in aqueous media was prepared.

Determination of sulfite in food and beverages using a reliable ratiometric AIE probe

The feasibility of using an “AIE + ICT” probe for a highly accurate and reliable determination of the sulfite level in food and beverages is demonstrated.

Internet of Things-Enabled Aggregation-Induced Emission Probe for Cu2+ Ions: Comprehensive Investigations and Three-Dimensional Printed Portable Device Design

Herein, we have developed a novel aggregation-induced emission (AIE) probe and three-dimensional (3D) printed portable device for copper (Cu²⁺) sensing in an aqueous medium. A ubiquitous synthetic route has been employed to devise the anthracene-conjugated imidazo[1,5-a]pyridine (TL19) probe as a unique anchor for Cu²⁺ ions. The TL19 is meticulously characterized through pivotal spectroscopic techniques, and the satisfactory results were obtained. The solvatochromic analysis and density functional theory calculations cohesively reveal that the TL19 exhibits the intramolecular charge transfer transition upon photoexcitation. Intriguingly, the TL19 exhibits spherically shaped nanoaggregates and enhanced fluorescence in DMSO/water (10:90) mixtures. This fluorescent nanoaggregate instantaneously responded toward the detection of Cu²⁺ via a deaggregation mechanism. The detection limit is found to be 9 pM in an aqueous medium. Further, the detection of Cu²⁺ in the HeLa cells has also been achieved due to bright green fluorescence, photostability, and biocompatibility nature of TL19 aggregates. On the other hand, an internet of things (IoT)-embedded 3D printed portable device is constructed for the detection of Cu²⁺ ions in real water samples. The Cu²⁺ detection is achieved through an IoT device, and results were acknowledged through an android application in 3.32 s round-trip time. Thus, the IoT-enabled AIE probe could be a prospective device for Cu²⁺ detection in a constrained environment.

Aggregation-Induced Emission Luminogens for Mitochondria-Targeted Cancer Therapy

The importance of mitochondria in tumorigenesis makes these organelles an ideal target for cancer therapy. In recent years, luminogens with the aggregation-induced emission (AIE) effect have been developed for mitochondrial targeting and cancer treatment. The induction of mitochondrial dysfunction can be an effective pathway of chemotherapy, photodynamic therapy, and combination therapy against cancer. This review focuses on recent progress in the field of AIE luminogens (AIEgens) for cancer theranostics based on mitochondrial targeting and dysfunction. AIEgens for cancer treatment, including chemotherapy, photodynamic therapy, and combination therapy, are summarized herein. Molecular design efforts toward mitochondrial targeting and mitochondria-damaging mechanisms are also discussed. Finally, we discuss the challenges and future directions of development for AIEgens in mitochondria-targeted cancer treatment.

Dissolving microneedles integrated with pH-responsive micelles containing AIEgen with ultra-photostability for enhancing melanoma photothermal therapy

Photothermal therapy (PTT) based on aggregation-induced emission luminogen (AIEgen) is very promising for superficial tumor therapy due to the superior photostability and photothermal conversion efficiency of AIEgens. However, the systemic administration of AIEgen remains challenging, mainly because of solubility dissatisfaction and biodistribution. Here, a dissolving microneedle (MN) system loaded with AIEgen (NIR950) was developed for topical administration to treat malignant skin tumor melanoma. Firstly, NIR950-loaded polymeric micelles (NIR950@PMs) were prepared via a nanoprecipitation method to increase the drug solubility. Then, micelles were concentrated on needle tips of MN (NIR950@PMs@MN) by a two-step molding method. NIR950@PMs showed no distinct decline in emission intensity under continuous laser irradiation for an hour. Moreover, the pH-responsive micelles can be protonated in an acidic tumor microenvironment to facilitate the intracellular uptake. By virtue of dissolving MN, NIR950@PMs could rapidly accumulate at the tumor site and reach a suitable temperature for killing cancer cells under laser irradiation. With only single administration and one-time laser irradiation, the NIR950@PMs@MN could notably eliminate melanoma tumors with a low dose of NIR950. Overall, this dissolving MN system loaded with NIR950 showed remarkable photostability and also achieved a valid photothermal effect, which indicate great potential for clinical superficial tumor therapy.

Intracellular Ruthenium-Promoted (2+2+2) Cycloadditions

Metal-mediated intracellular reactions are becoming invaluable tools in chemical and cell biology, and hold promise for strongly impacting the field of biomedicine. Most of the reactions reported so far involve either uncaging or redox processes. Demonstrated here for the first time is the viability of performing multicomponent alkyne cycloaromatizations inside live mammalian cells using ruthenium catalysts. Both fully intramolecular and intermolecular cycloadditions of diynes with alkynes are feasible, the latter providing an intracellular synthesis of appealing anthraquinones. The power of the approach is further demonstrated by generating anthraquinone AIEgens (AIE=aggregation induced emission) that otherwise do not go inside cells, and by modifying the intracellular distribution of the products by simply varying the type of ruthenium complex.

pH-responsive copper-cluster-based dual-emission ratiometric fluorescent probe for imaging of bacterial metabolism

The profiling of bacterial metabolism is of great significance in practical applications. Therefore, the development of ultrasensitive and highly selective probe for bacterial metabolism detection and imaging is extremely desirable. Herein, a novel dual-emission pH-response bacterial metabolism detection and imaging probe is successfully developed. This probe consists of large-sized and easily separated SiO₂ microspheres, copper nanoclusters (Cu NCs) with red emission, and carbon dots (CDs) with blue emission through in-situ self-assembly. In this system, the fluorescence of Cu NCs is sensitive to pH change due to their obvious aggregation-induced emission enhancement (AIEE) property, while the blue fluorescence of CDs remained almost stable. Therefore, red fluorescence and blue fluorescence are compounded with different fluorescence intensity at different pH values, and their fluorescence ratio is also different. By observation of composite fluorescence color, the visual colorimetric pH detection can be realized with the change of pH value of 0.2 units. Utilizing this system, we are able to detect bacterial metabolism with high signal-to-noise ratio, and it can also be used for bacterial metabolic imaging. Therefore, the pH-responsive Cu NCs-based dual-emission ratiometric fluorescent probe we constructed can provide new ideas for bacterial detection, antimicrobial sterilization, and biological imaging.

An aggregation-induced emission fluorogen/DNA probe carrying an endosome escaping pass for tracking reduced thiol compounds in cells

The fluorescent nanoprobes for reduced thiol compounds (represented by glutathione, GSH) are constructed based on the aggregation-induced emission (AIE) luminescence mechanism and endosome escape technology. First, a DNA sequence was designed with the decoration of biotin at the 5'-end, disulfide bound in the internal portion, and amino at the 3'-end. The aptamer of the MCF-7 cell was also one of the most important structures in our DNA sequence for the selectivity of MCF-7 cells. We modified streptavidin-modified magnetic beads (MB) with biotin-modified influenza virus hemagglutinin peptide (HA) and biotin-DNA-amino to form MB/DNA/HA. Carboxyl-modified tetraphenylethylene (TPE), an iconic AIE fluorogen, was bonded with amino-modified DNA by covalent interactions (TPE/DNA). Then, the TPE molecule was attached on the outer layer of MB via biotin-modified TPE/DNA to form MB/DNA/HA/TPE. Compared with traditional AIE/biomolecule conjugates, the nanoprobe had an enhanced endosome escape function, due to the assembly of HA. This construction made the intracellular fluorescence response more accurate. In the presence of reduced thiol compounds (take GSH, for example), the disulfide bond on the DNA was reduced by thiol-disulfide exchange reactions and the TPE molecule was released into the solution. The shedding TPE molecule was more hydrophobic than TPE/DNA and the conversion of TPE/DNA to shedding TPE could lead to the aggregation of the TPE fluorogen. Thus, its fluorescence was enhanced. Under the optimized condition, the fluorescence intensity increased with the increase in concentration of GSH' ranging from 1.0 × 10^-9 M to 1.0 × 10^-5 M' and the detection limit was 1.0 × 10^-9 M. The relative standard deviation (RSD) was calculated to be 3.6%. The recovery in cell homogenate was from 94.5 to 102.7%. The nanoprobe provided a way for the detection of reduced thiol compounds in MCF-7 cells. We envision that, in the near future, our strategy of DNA-instructed AIE could be widely applied for biosensing and bioimaging in vitro and even in vivo with dramatically enhanced sensitivity. Graphical Abstract.

Simultaneous Ultrasensitive Detection and Elimination of Drug-Resistant Bacteria by Cyclometalated Iridium(III) Complexes

Antimicrobial resistance has become a major threat to public health due to the rampant and empirical use of antibiotics. Rapid diagnosis of bacteria with the desired sensitivity and selectivity still, however, remains an open challenge. We report a special class of water-soluble metal-based aggregation-induced emission luminogens (AIEgens), namely, cyclometalated iridium(III) polypyridine complexes of the type [Ir(PQ)₂(N^N)]Cl (1-3), where PQ = 2-phenylquinoline and N^N = 2,2'-bipyridine derivatives, that demonstrate dual capability for detection and elimination of drug-resistant bacteria in aqueous solutions. These AIEgens exhibit selective and rapid sensing of endotoxins, such as lipopolysaccharides (LPS) and lipoteichoic acid (LTA) released by the bacteria, with a detection limit in the lower nanomolar range. Targeting these naturally amplified biomarkers (approximately 1 million copies per cell) by iridium(III) complexes induces strong AIE in the presence of different Gram-negative and Gram-positive bacteria including carbapenem-resistant A. baumannii (CRAB) and methicillin-resistant S. aureus (MRSA) at concentrations as low as 1.2 CFU/mL within 5 min in spiked water samples. Detection of bacteria by the complexes is also visible to the naked eye at higher (10⁸ CFU/mL) cell concentrations. More notably, complexes 1 and 2 show potent antibacterial activity against drug-resistant bacteria with low minimum inhibitory concentrations (MICs) ≤ 5 μg/mL (1-4 μM) via ROS generation and cell membrane disintegrity. To the best of our knowledge, this work is the "first-in-class" example of a metal-based theranostic system that integrates selective, sensitive, rapid, naked-eye, wash-free, and real-time detection of bacteria using broad-spectrum antibiotics into a single platform. This dual capability of AIEgens makes them ideal scaffolds for monitoring bacterial contamination in aqueous samples and pharmaceutical applications.

In Situ Monitoring of Mitochondria Regulating Cell Viability by the RNA-Specific Fluorescent Photosensitizer

Cell viability is greatly affected by external stimulus eliciting correlated dynamical physiological processes for cells to choose survival or death. A few fluorescent probes have been designed to detect whether the cell is in survival state or apoptotic state, but monitoring the regulation process of the cell undergoing survival to death remains a long-standing challenge. Herein, we highlight the in situ monitor of mitochondria regulating the cell viability by the RNA-specific fluorescent photosensitizer L. At normal conditions, L anchored mitochondria and interacted with mito-RNA to light up the mitochondria with red fluorescence. With external light stimulus, L generated reactive oxide species (ROS) and cause damage to mitochondria, which activated mitochondrial autophagy to prevent death, during which the red fluorescence of L witnessed dynamical distribution in accordance with the evolution of vacuole structures containing damaged mitochondria into autophagosomes. However, with ROS continuously increasing, the mitochondrial apoptosis was eventually commenced and L with red fluorescent was gradually accumulated in the nucleoli, indicating the programmed cell death. This work demonstrated how the delicate balance between survival and death are regulated by mitochondria.

Hydrophobic Interaction: A Promising Driving Force for the Biomedical Applications of Nucleic Acids

The comprehensive understanding and proper use of supramolecular interactions have become critical for the development of functional materials, and so is the biomedical application of nucleic acids (NAs). Relatively rare attention has been paid to hydrophobic interaction compared with hydrogen bonding and electrostatic interaction of NAs. However, hydrophobic interaction shows some unique properties, such as high tunability for application interest, minimal effect on NA functionality, and sensitivity to external stimuli. Therefore, the widespread use of hydrophobic interaction has promoted the evolution of NA-based biomaterials in higher-order self-assembly, drug/gene-delivery systems, and stimuli-responsive systems. Herein, the recent progress of NA-based biomaterials whose fabrications or properties are highly determined by hydrophobic interactions is summarized. 1) The hydrophobic interaction of NA itself comes from the accumulation of base-stacking forces, by which the NAs with certain base compositions and chain lengths show properties similar to thermal-responsive polymers. 2) In conjugation with hydrophobic molecules, NA amphiphiles show interesting self-assembly structures with unique properties in many new biosensing and therapeutic strategies. 3) The working-mechanisms of some NA-based complex materials are also dependent on hydrophobic interactions. Moreover, in recent attempts, NA amphiphiles have been applied in organizing macroscopic self-assembly of DNA origami and controlling the cell-cell interactions.

Development of Facile and Selective Fluorescent Probe for Physiological Phosphates based on Aggregation-induced Emission

In this work, two new fluorescence chemosensors 2-(4-(1,2,2-triphenylvinyl)phenoxy) acetic acid (TPE-COOH) and 2,2'-(((1,2-diphenylethane-1,2-diyl)bis(4,1-phenylene))bis(oxy))diacetic acid (TPE-(COOH)₂) were synthesized and applied for the facile detection of physiological phosphates. Due to the aggregation-induced emission (AIE) character, the emission can be turned on after label free interaction with polyethyleneimine (PEI). When the physiological phosphates were introduced to the system, the AIEgens/PEI complex was dissociated due to stronger electrostatic interaction between PEI and phosphates, which resulted in the significant fluorescence quenching of AIEgens. As the four kinds of phosphates cytidine-5'-diphosphate disodium salt (CDP), adenosine-5 (ADP), sodium pyrophosphate (PPi) and guanosine-5'-diphosphate disodium salt (GDP) had different interaction with PEI, also the TPE-COOH and TPE-(COOH)₂ had different interaction with PEI, the fluorescence quenching effect was distinct for four phosphates. The unique pattern of fluorescence variations was differentiated by chemometric methods including principal component analysis and linear discriminant analysis. The robustness of the sensor array was proved by discrimination of four kinds of phosphates in serum samples with different concentrations, and the discrimination capacity was not influenced in complicated samples Graphical abstract.

Fluorescent nanoparticles with ultralow chromophore loading for long-term tumor-targeted imaging

Recently, organic dyes with aggregation-induced emission (AIE) have attracted much attention in bioimaging and diagnostics. Relatively, the application of traditional dyes has diminished because of aggregation-caused quenching (ACQ). In this work, we compare the imaging ability of nanoparticle formulations of these two kinds of dyes. Boron dipyrromethene (BODIPY) was chosen as a representative of the ACQ dyes, and an aggregation-induced emission (AIE) dye BPMT was used for comparison. BODIPY and BPMT were entrapped into PEG_5k-PLA_10k to form BODIPY-loaded NPs (BNPs) and BPMT-loaded NPs (ANPs), respectively. In vivo and ex vivo imaging demonstrated that BNP1 with ultralow BODIPY load (0.07%) can effectively accumulate in tumor tissues and enable long-term noninvasive imaging. In contrast, ANP4 with high BPMT load (1.6%) has poor bioimaging ability. In general, our work has certain reference significance for the application of ACQ dyes and AIEgens in bioimaging, diagnostics, and theranostics. STATEMENT OF SIGNIFICANCE: In this work, Boron dipyrromethene (BODIPY) was chosen as a representative of ACQ dyes. As a control, (Z)-2-(4'-(9H-carbazol-9-yl)-[1,1'-biphenyl]-4-yl)-3-(7-(4-(bis(4methoxyphenyl)amino) phenyl) benzo[c] [1,2,5] thiadiazol-4-yl) acrylonitrile (BPMT) was selected as an aggregation-induced emission (AIE) dye. BODIPY and BPMT was entrapped into PEG5k-PLA10k to form BODIPY-loaded NPs (BNPs) and BPMT-loaded NPs (ANPs), respectively. In vivo and ex vivo imaging demonstrated that BNP1 with ultralow BODIPY load (0.07%) can effectively accumulate in tumor tissues and realize long-term noninvasive imaging. The weaknesses of ACQ effect can be converted into advantages by skillful use of nanotechnology, which can not only save the cost but also realize high efficiency targeted cancer imaging.

Synthesis of new fluorescent molecules having an aggregation-induced emission property derived from 4-fluoroisoxazoles

Fluorescent molecules based on a fluorinated isoxazole scaffold were synthesized and investigated for their photochemical properties. The introduction of a fluorine substituent into 3,5-diarylisoxazoles led to an increase of fluorescence intensity and exhibited a redshift in the emission intensity. α-Fluorinated boron ketoiminates (F-BKIs) were also synthesized via a ring-opening reaction of 4-fluoroisoxazoles and exhibited highly fluorescent luminescence and aggregation-induced emission (AIE), showing promise as a new fluorophore.

AIEgens: An emerging fluorescent sensing tool to aid food safety and quality control

As a global public health problem, food safety has attracted increasing concern. To minimize the risk exposure of food to harmful ingredients, food quality and safety inspection that covers the whole process of "from farm to fork" is much desired. Fluorescent sensing is a promising and powerful screening tool for sensing hazardous substances in food and thus plays a crucial role in promoting food safety assurance. However, traditional fluorphores generally suffer the problem of aggregation-caused quenching (ACQ) effect, which limit their application in food quality and safety inspection. In this regard, luminogens with aggregation-induced emission property (AIEgens) showed large potential in food analysis since AIEgens effectively surmount the ACQ effect with much better detection sensitivity, accuracy, and robustness. In this contribution, we review the latest developments of food safety monitoring by AIEgens, which will focus on the molecular design of AIEgens and their sensing principles. Several examples of AIE-based sensing applications for screening food contaminations are highlighted, and future perspectives and challenges in this emerging field are tentatively elaborated. We hope this review can motivate new research ideas and interest to aid food safety and quality control, and facilitate more collaborative endeavors to advance the state-of-the-art sensing developments and reduce actual translational gap between laboratory research and industrial production.

Development of fluorinated benzils and bisbenzils as room-temperature phosphorescent molecules

Pure organic phosphorescent molecules are attractive alternatives to transition-metal-complex-based phosphores for biomedical and technological applications owing to their abundance and nontoxicity. This article discloses the design, synthesis, and photophysical properties of fluorinated benzil and bisbenzil derivatives as potential pure organic room-temperature phosphorescent molecules. These compounds were separately converted from the corresponding fluorinated bistolanes via PdCl₂-catalyzed oxidation by dimethyl sulfoxide, while nonfluorinated bistolane provided the corresponding bisbenzil derivatives exclusively in a similar manner. Intensive investigations of the photophysical properties of the benzil and bisbenzil derivatives in toluene at 25 °C showed both fluorescence with a photoluminescence (PL) band at a maximum wavelength (λ_PL) of around 400 nm and phosphorescence with a PL band at a λ_PL of around 560 nm. Interestingly, intersystem crossing effectively caused fluorinated benzils to emit phosphorescence, which may arise from immediate spin-orbit coupling involving the ¹(n, π)→³(π, π) transition, unlike the case of fluorinated or nonfluorinated bisbenzil analogues. These findings offer a useful guide for developing novel pure organic room-temperature phosphorescent materials.

Facile Synthesis of Efficient Luminogens with AIE Features for Three-Photon Fluorescence Imaging of the Brain through the Intact Skull

Visualization of the brain in its native environment is important for understanding common brain diseases. Herein, bright luminogens with remarkable aggregation-induced emission (AIE) characteristics and high quantum yields of up to 42.6% in the solid state are synthesized through facile reaction routes. The synthesized molecule, namely BTF, shows ultrabright far-red/near-infrared emission and can be fabricated into AIE dots by a simple nanoprecipitation procedure. Due to their high brightness, large Stokes shift, good biocompatibility, satisfactory photostability, and large three-photon absorption cross section, the AIE dots can be utilized as efficient fluorescent nanoprobes for in vivo brain vascular imaging through the intact skull by a three-photon fluorescence microscopy imaging technique. This is the first example of using AIE dots for the visualization of the cerebral stroke process through the intact skull of a mouse with high penetration depth and good image contrast. Such good results are anticipated to open up a new venue in the development of efficient emitters with strong nonlinear optical effects for noninvasive bioimaging of living brain.

Enhanced Emission of Zinc Nitride Colloidal Nanoparticles with Organic Dyes for Optical Sensors and Imaging Application

Herein, we have reported on the efficiency of inorganic Zn₃N₂ nanoparticles for labeling plant cells and animal cells toward imaging applications with negligible toxicity. We have synthesized zinc nitride (Zn₃N₂) colloidal nanoparticles with an average size of 25 nm at room temperature. The optical band gap of the prepared Zn₃N₂ nanoparticles is 2.8 eV and gives a visible range emission at 415 nm. With the addition of Zn₃N₂ colloids to organic dyes such as protoporphyrin, flavin adenine dinucleotide, fluorescein, and neutral red, the emission intensity of the organic dyes enhanced from 3 to 20 times. The molecular simulation and lifetime studies evidence the possibility of energy transfer from zinc nitride to organic dyes. The enhancement of dye intensity in the presence of Zn₃N₂ enhanced the vicinity of the cellular environment during confocal imaging of plant cells and animal cells. The detailed results suggested Zn₃N₂ for bioimaging and biosensor applications.

One stone, three birds: one AIEgen with three colors for fast differentiation of three pathogens

Visually identifying pathogens favors rapid diagnosis at the point-of-care testing level. Here, we developed a microenvironment-sensitive aggregation-induced emission luminogen (AIEgen), namely IQ-Cm, for achieving fast discrimination of Gram-negative bacteria, Gram-positive bacteria and fungi by the naked-eye. With a twisted donor-acceptor and multi-rotor structure, IQ-Cm shows twisted intramolecular charge transfer (TICT) and AIE properties with sensitive fluorescence color response to the microenvironment of pathogens. Driven by the intrinsic structural differences of pathogens, IQ-Cm with a cationic isoquinolinium moiety and a membrane-active coumarin unit as the targeting and interacting groups selectively locates in different sites of three pathogens and gives three naked-eye discernible emission colors. Gram-negative bacteria are weak pink, Gram-positive bacteria are orange-red and fungi are bright yellow. Therefore, based on their distinctive fluorescence response, IQ-Cm can directly discriminate the three pathogens at the cell level under a fluorescence microscope. Furthermore, we demonstrated the feasibility of IQ-Cm as a visual probe for fast diagnosis of urinary tract infections, timely monitoring of hospital-acquired infection processes and fast detection of molds in the food field. This simple visualization strategy based on one single AIEgen provides a promising platform for rapid pathogen detection and point-of-care diagnosis.

First fluorescent sensor for curcumin in aqueous media based on acylhydrazone-bridged bis-tetraphenylethylene

This work designed and synthesized the first organic fluorescent sensor for curcumin in aqueous media based on red-to-green fluorescence change of acylhydrazone-bridged bis-tetraphenylethylene (Bis-TPE). Bis-TPE was prepared by condensation of formyltetraphenylethylene with dihydrazide oxalate in 86% yield. It has the large conjugated electron effect with strong red AIE fluorescence in aqueous solution. It displayed high selective sensing ability for curcumin with red-to-green fluorescence change in THF-H₂O (5:95). The detection limit was as low as 1.15 × 10^-7 M. The sensing mechanism was confirmed as 1:1 stoichiometric ratio based on quadruple hydrogen bonds. Bis-TPE was successfully applied for analyzing curcumin of ginger and living cell imaging, supplying a new detecting strategy for curcumin in real sample and living environment.

A red fluorogen: AIEE characteristic, photoluminescence mechanism and its application as chemosensor for ClO. SPECTROCHIMICA ACTA. PART A, MOLECULAR AND BIOMOLECULAR SPECTROSCOPY 2020;228:117794. [PMID: 31757700 DOI: 10.1016/j.saa.2019.117794]

Red material is widely used in many fields because it has a lot of high performances such as strong penetrability, little trauma to cell and tissue, easy to prepare, and low background interference. However, a lot of organic materials were troubled with the aggregation caused emission quenching (ACQ) effect, which really limits their practical applications. In contrast, aggregation induced emission (AIE) and aggregation-induced enhanced emission (AIEE) effects provide an efficient method to break the obstacle of ACQ effect. Herein, a red light molecule was developed by integrating cyano and alkyl sulfide moieties. Its photoluminescence mechanism was further revealed by fluorescence spectrum, density functional theory (DFT) and X-ray single crystal diffraction, respectively. It is found that this compound has good planar construction and has no rotatory unit, it showed typical AIEE performance because of intramolecular D-π-A structure and the formation of J-aggregation. This molecular design principle may be able to offer an effective strategy to exploit red AIE/AIEE organic materials. Meanwhile, this fluorogen showed excellent response capability to ClO^- including high selectivity and sensitivity, and cell imaging performance.