A robust zirconium amino acid metal-organic framework for proton conduction

A Showcase of Green Chemistry: Sustainable Synthetic Approach of Zirconium-Based MOF Materials

Zirconium-based metal-organic framework materials (Zr-MOFs) have more practical usage over most conventional benchmark porous materials and even many other MOFs due to the excellent structural stability, rich coordination forms, and various active sites. However, their mass-production and application are restricted by the high-cost raw materials, complex synthesis procedures, harsh reaction conditions, and unexpected environmental impact. Based on the principles of "Green Chemistry", considerable efforts have been done for breaking through the limitations, and significant progress has been made in the sustainable synthesis of Zr-MOFs over the past decade. In this review, the advancements of green raw materials and green synthesis methods in the synthesis of Zr-MOFs are reviewed, along with the corresponding drawbacks. The challenges and prospects are discussed and outlooked, expecting to provide guidance for the acceleration of the industrialization and commercialization of Zr-MOFs.

Amino acid-templated zinc phosphites: low-dimensional structures, fluorescence, and nonlinear optical properties

Two new zinc phosphites were prepared using the amino acid alanine as a structure-directing agent. They have tubular and ladder-like structures, exhibiting blue fluorescence upon UV light irradiation. Notably, the tubular structure is unprecedented in metal phosphite systems. The compound is a nonlinear optically active solid with a second-harmonic generation efficiency of about 1.2 times that of KH2PO4 (KDP).

Biocompatible MIP-202 Zr-MOF tunable sorbent for cost-effective decontamination of anionic and cationic pollutants from waste solutions

This reported work aims to fabricate an eco-friendly Zr bio-based MOF and assessment its adsorption efficiency towards the cationic and anionic dye pollutants including methylene blue (MB) and direct red 81 (DR-81), respectively. Also, its adsorption tendency for the highly toxic heavy metal of hexavalent chromium (Cr(VI)) was compared with dyes. The adsorption performance of bio-MOF showed that the maximum monolayer adsorption capacities were recorded as 79.799 mg/g for MB, 36.071 mg/g for DR-81, and 19.012 mg/g for Cr(VI). Meanwhile, the optimum dosage of as-synthesized MIP-202 bio-MOF was 0.5, 1, and 2 g L^-1 for MB, DR-81, and Cr(VI), respectively. Thermodynamic analysis demonstrated the spontaneous, thermodynamically, and endothermic nature of the decontamination processes onto the fabricated Zr bio-based MOF. The adsorption data were fitted by Langmuir isotherm model compared with Freundlich and Temkin models for all studied water pollutants. Pseudo-second-order kinetic model was a fit model for description of the adsorption kinetics of the different cationic and anionic pollutants onto Zr bio-based MOF. These outcomes indicated that Zr bio-based MOF has potential application for adsorption of different types of industrial water pollutants including cationic and anionic dyes and heavy metals.

Proton Conduction of Nafion Hybrid Membranes Promoted by NH3-Modified Zn-MOF with Host-Guest Collaborative Hydrogen Bonds for H2/O2 Fuel Cell Applications

It is of great significance to develop creative proton exchange membrane materials for proton exchange membrane fuel cells (PEMFCs). The strategy of doping metal-organic frameworks (MOFs) with guest molecules into the Nafion matrix is adopted to improve the electrochemical performance of Nafion hybrid membranes. Various and abundant hydrogen bonds can make a tremendous contribution to the proton conduction of hybrid membranes. In this work, we used high proton-conducting Zn-MOFs with the characteristics of host-guest collaborative hydrogen bonds as the filler to prepare Zn-MOF/Nafion hybrid membranes. Alternating current (AC) impedance tests show that when the doping amount of Zn-MOF is 5%, the proton conductivity reaches 7.29 × 10^-3 S·cm^-1, being 1.87 times that of the pure Nafion membrane at 58% relative humidity (RH) and 80 °C. In an attempt to prove the promotion effect of guest NH₃ on proton conductivity of Nafion hybrid membranes, Zn-MOF-NH₃ was filled into the Nafion matrix. Under the same conditions, its proton conductivity reaches the maximum value of 2.13 × 10^-2 S·cm^-1, which is 5.47 times that of the pure Nafion membrane. Zn-MOF-NH₃/Nafion-5 was used to fabricate a proton exchange membrane for application in H₂/O₂ fuel cells. The maximum power density of 212 mW cm^-2 and a current density of 630 mA cm^-2 reveal a respectable single cell performance. This study provides a promising method for optimizing the structure of MOF proton conductors and inspires the preparation of high-performance Nafion hybrid membranes.

Photoswitchable Metal-Organic Framework Thin Films: From Spectroscopy to Remote-Controllable Membrane Separation and Switchable Conduction

The preparation of functional materials from photoswitchable molecules where the molecular changes multiply to macroscopic effects presents a great challenge in material science. An attractive approach is the incorporation of the photoswitches in nanoporous, crystalline metal-organic frameworks, MOFs, often showing remote-controllable chemical and physical properties. Because of the short light-penetration depth, thin MOF films are particularly interesting, allowing the entire illumination of the material. In the present progress report, we review and discuss the status of photoswitchable MOF films. These films may serve as model systems for quantifying the isomer switching yield by infrared and UV-vis spectroscopy as well as for uptake experiments exploring the switching effects on the host-guest interaction, especially on guest adsorption and diffusion. In addition, the straightforward device integration facilitates various experiments. In this way, unique features were demonstrated, such as photoswitchable membrane separation with continuously tunable selectivity, light-switchable proton conductivity of the guests in the pores, and remote-controllable electronic conduction.

A methylation-inspired mesoporous coordination polymer for identification and removal of organic pollutants in aqueous solutions

Tuning the interfacial chemistry of a metal–biomolecule coordination hybrid via bio-inspired methylation for structure enhancement and selective hazard adsorption/identification.

A tryptophan-based copper(ii) coordination polymer: catalytic activity towards Suzuki–Miyaura cross-coupling reactions

An unusual tryptophan coordination mode with copper(ii) wherein l-tryp is coordinated through the carboxylate and amine groups. A heterogeneous catalyst for the Suzuki cross-coupling reaction with ∼98% yield under normal reaction conditions.

A water-stable open-framework zirconium(iv) phosphate and its water-assisted high proton conductivity

A water stable open-framework zirconium(iv) phosphate (ZrP) has a low anhydrous proton conductivity of 7.73 × 10−7 S cm−1 at 220 °C, and a water assisted high proton conductivity of 4.41 × 10−2 S cm−1 at 60 °C and 98% RH.

Pillared-layered indium phosphites templated by amino acids: isoreticular structures, water stability, and fluorescence

Two crystalline open-framework indium phosphites (denoted SCU-31 and SCU-32) were prepared using amino acids as structure-directing agents. They have isoreticular pillared-layered structures built up from 6 × 1 and 4 = 1 clusters. Notably, the two compounds show excellent water stability and exhibit blue fluorescence under UV light irradiation at room temperature. The proton-conducting behaviour of SCU-31 was also investigated.

Metal-Organic Frameworks Based on Group 3 and 4 Metals

Metal-organic frameworks (MOFs) based on group 3 and 4 metals are considered as the most promising MOFs for varying practical applications including water adsorption, carbon conversion, and biomedical applications. The relatively strong coordination bonds and versatile coordination modes within these MOFs endow the framework with high chemical stability, diverse structures and topologies, and interesting properties and functions. Herein, the significant progress made on this series of MOFs since 2018 is summarized and an update on the current status and future trends on the structural design of robust MOFs with high connectivity is provided. Cluster chemistry involving Y, lanthanides (Ln, from La to Lu), actinides (An, from Ac to Lr), Ti, and Zr is initially introduced. This is followed by a review of recently developed MOFs based on group 3 and 4 metals with their structures discussed based on the types of inorganic or organic building blocks. The novel properties and arising applications of these MOFs in catalysis, adsorption and separation, delivery, and sensing are highlighted. Overall, this review is expected to provide a timely summary on MOFs based on group 3 and 4 metals, which shall guide the future discovery and development of stable and functional MOFs for practical applications.

Development of biological metal-organic frameworks designed for biomedical applications: from bio-sensing/bio-imaging to disease treatment

Metal-organic frameworks (MOFs) are built using various organic ligands and metal ions (or clusters). With properties of high porosity, tunable chemical composition, and potential for post-synthetic modification, they have been applied in biomedicine, especially in bio-sensing, bio-imaging, and drug delivery. Since organic ligands and metal centers (ions or clusters) in the structure of MOFs can directly influence the property, function, and performance of MOFs, strict screening of organic ligands and metal centers is necessary. Especially, to improve the application of MOFs in the field of biomedicine, biocompatible organic ligands with low toxicity are desirable. In recent years, biological metal-organic frameworks (bio-MOFs) with ideal biocompatibility and diverse functionality have attracted wide attention. Endogenous biomolecules, including nucleobases, amino acids, peptides, proteins, porphyrins and saccharides, are employed as frameworks for MOF construction. These biological ligands coordinate with diverse metal centers in different ways, leading to the structural diversity of bio-MOFs. In this review, we summarize the organic ligand selectivity in constructing different types of bio-MOFs and their influence in biomedical applications with attractive new functions.

Influence of Thermal and Mechanical Stimuli on the Behavior of Al-CAU-13 Metal-Organic Framework

The response of the metal-organic framework aluminum-1,4-cyclohexanedicarboxylate or Al-CAU-13 (CAU: Christian Albrecht University) to the application of thermal and mechanical stimuli was investigated using synchrotron powder X-ray diffraction (SPXRD). Variable temperature in situ SPXRD data, over the range 80-500 K, revealed a complex evolution of the structure of the water guest containing Al-CAU-13H2O, the dehydration process from ca. 310 to 370 K, and also the evolution of the guest free Al-CAU-13 structure between ca. 370 and 500 K. Rietveld refinement allowed this complexity to be rationalized in the different regions of heating. The Berman thermal Equation of State was determined for the two structures (Al-CAU-13H2O and Al-CAU-13). Diamond anvil cell studies at elevated pressure (from ambient to up to ca. 11 GPa) revealed similarities in the structural responses on application of pressure and temperature. The ability of the pressure medium to penetrate the framework was also found to be important: non-penetrating silicone oil caused pressure induced amorphization, whereas penetrating helium showed no plastic deformation of the structure. Third-order Vinet equations of state were calculated and show Al-CAU-13H2O is a hard compound for a metal-organic framework material. The mechanical response of Al-CAU-13, with tetramethylpyrazine guests replacing water, was also investigated. Although the connectivity of the structure is the same, all the linkers have a linear e,e-conformation and the structure adopts a more open, wine-rack-like arrangement, which demonstrates negative linear compressibility (NLC) similar to Al-MIL-53 and a significantly softer mechanical response. The origin of this variation in behavior is attributed to the different linker conformation, demonstrating the influence of the S-shaped a,a-conformation on the response of the framework to external stimuli.

Iontronics Using V2CTx MXene-Derived Metal-Organic Framework Solid Electrolytes

Electronic applications of porous metal-organic frameworks (MOFs) have recently emerged as an important research area. However, there is still no report on using MOF solid electrolytes in iontronics, which could take advantage of the porous feature of MOFs in the ionic transport. In this article, MXene-derived two-dimensional porphyrinic MOF (MX-MOF) films are demonstrated as an electronic-grade proton-conducting electrolyte. Meanwhile, the MX-MOF film shows high quality, chemical stability, and capability of standard device patterning processes (e.g., dry etching and optical and electron beam lithography). Using the commercialized nanofabrication processes, an electric double-layer (EDL) transistor is demonstrated using the MX-MOF film (derived from V₂CT_x MXene) as an ionic gate and MoS₂ film as a semiconducting channel layer. The EDL transistor, operated by applying an electric field to control the interaction between ions and electrons, is the core device platform in the emerging iontronics field. Therefore, The MX-MOF, confirmed as a solid electrolyte for EDL transistor devices, could have a significant impact on iontronics research and development.

Proton Conductive Zr-Phosphonate UPG-1-Aminoacid Insertion as Proton Carrier Stabilizer

Proton exchange membrane fuel cells (PEMFCs) are an attractive green technology for energy generation. The poor stability and performances under working conditions of the current electrolytes are their major drawbacks. Metal-Organic Frameworks (MOFs) have recently emerged as an alternative to overcome these issues. Here, we propose a robust Zr-phosphonate MOF (UPG-1) bearing labile protons able to act a priori as an efficient electrolyte in PEMFCs. Further, in an attempt to further enhance the stability and conductivity of UPG-1, a proton carrier (the amino acid Lysine, Lys) was successfully encapsulated within its porosity. The behaviors of both solids as an electrolyte were investigated by a complete experimental (impedance spectroscopy, water sorption) and computational approach (MonteCarlo, water sorption). Compared with the pristine UPG-1, the newly prepared Lys@UPG-1 composite showed similar proton conductivity but a higher stability, which allows a better cyclability. This improved cyclability is mainly related to the different hydrophobic-hydrophilic balance of the Lys@UPG-1 and UPG-1 and the steric protection of the reactive sites of the MOF by the Lys.

Field-induced slow relaxation of magnetisation in two one-dimensional homometallic dysprosium(iii) complexes based on alpha- and beta-amino acids

Two one-dimensional dysprosium(iii) complexes based on α-glycine (gly) and β-alanine (β-ala) amino acids, with the formula {[Dy₂(gly)₆(H₂O)₄](ClO₄)₆·5H₂O}_n (1) and {[Dy₂(β-ala)₆(H₂O)₄](ClO₄)₆·H₂O}_n (2), have been synthesised and characterised structurally and magnetically. Both compounds crystallise in the triclinic system with the space group P1[combining macron]. In 1, two Dy^III ions are eight-coordinate and bound to six oxygen atoms from six gly ligands and two oxygen atoms from two water molecules, showing different geometries (bicapped trigonal prism and square antiprism). In 2, two Dy^III ions are nine-coordinate and bound to seven oxygen atoms from six β-ala ligands and two oxygen atoms from two water molecules in the same geometry (capped square antiprism). In the crystal packing of both compounds, cationic {[Dy₂(L)₆(H₂O)₄]⁶⁺}_n [L = α-glycine (1) and β-alanine (2)] chains, ClO₄^- anions, and water molecules generate a network connected through H-bonding interactions. The study of the magnetic properties of 1 and 2 through dc magnetic susceptibility measurements reveals different magnetic behaviour 1 and 2. In addition, ac magnetic susceptibility measurements show a field-induced slow relaxation of magnetisation for both compounds, pointing out that the single-molecule magnet (SMM) phenomenon occurs in both 1 and 2.

Two amino acid-templated metal phosphates: surfactant-thermal synthesis, water stability, and proton conduction

Two new metal phosphates, namely, Zn(HPO₄)(C₆H₁₁NO₂) (1) and (C₅H₁₀NO₂)Ga₄(PO₄)₄F·3H₂O (2), were prepared under surfactant-thermal conditions. Single-crystal X-ray diffraction analyses reveal that compound 1 has a zigzag-chain structure decorated with homoproline and compound 2 has a three-dimensional zeolite-like structure templated by proline. Notably, compound 2 remains stable in both boiling water and aqueous solutions with a pH range of 2-12. It shows a proton conductivity of 8.89 × 10^-4 S cm^-1 at 85 °C and 95% relative humidity.

Metal-Organic Frameworks as a Versatile Platform for Proton Conductors

Metal-organic frameworks (MOFs) are an intriguing type of crystalline porous materials that can be readily built from metal ions or clusters and organic linkers. Recently, MOF materials, featuring high surface areas, rich structural tunability, and functional pore surfaces, which can accommodate a variety of guest molecules as proton carriers and to systemically regulate the proton concentration and mobility within the available space, have attracted tremendous attention for their roles as solid electrolytes in fuel cells. Recent advances in MOFs as a versatile platform for proton conduction in the field of humidity condition proton-conduction, anhydrous atmosphere proton-conduction, single-crystal proton-conduction, and including MOF-based membranes for fuel cells, are summarized and highlighted. Furthermore, the challenges, future trends, and prospects of MOF materials for solid electrolytes are also discussed.

Multiscale optimization of Li-ion diffusion in solid lithium metal batteries via ion conductive metal-organic frameworks

Optimization of solid electrolytes (SEs) is of great significance for lithium-based solid state batteries (SSBs). However, insufficient Li ion transport, deficient interfacial compatibility and formation of lithium dendrites lead to poor cycling performance. Based on Li+ conductive metal-organic frameworks (LCMOFs), herein a multiscale optimization strategy is put forward to facilitate Li+ transport within the MOFs (molecular scale), between the MOFs' boundaries (nanoscale) and across the SE/electrode interface (microscale) in SSBs. LCMOFs are obtained by binding Li+ onto ionogenic chemical groups (-CO2H, -SO3H and -OH) in nanoscale dispersed MOFs. Both experimental results and DFT simulations confirm the key role of ionogenic groups for Li+ transport. Furthermore, benefiting from the optimized interfaces between LCMOF crystals, SEs with excellent electrochemical properties are obtained, including a high ionic conductivity of 1.06 × 10-3 S cm-1 at 25 °C, a wide electrochemical window from 2.0 to 4.5 V, low interfacial resistances and stable Li plating/stripping. The fabricated Li|SE|LiFePO4 SSB exhibits high and stable charge/discharge capacities under wide operation temperatures ranging from -20 to 60 °C.

Syntheses of cucurbit[6]uril-based metal-organic rotaxane networks by the anion regulation strategy and their proton conduction properties

Two new cucurbit[6]uril (CB[6])-based metal-organic rotaxane networks (MORNs) were successfully obtained by tuning the coordination sphere of metal copper clusters. Compounds 1 and 2 exhibited relatively high proton conductivity at 85 °C and 97% relative humidity (RH), providing great promise for fuel cell electrolyte materials.

Enhanced properties of sulfonated polyether ether ketone proton exchange membrane by incorporating carboxylic-contained zeolitic imidazolate frameworks

Carboxylic-containing zeolitic imidazolate frameworks (ZIF-COOH) showed an obvious improvement in the performance of sulfonated polyether ether ketone (SPEEK)-based proton exchange membranes.

Proton conductive Zr-based MOFs

The preparation strategies, structures, proton conductivity, conducting mechanism, application prospects and future research trends of zirconium-based MOFs are reviewed and highlighted.

Structural features of proton-conducting metal organic and covalent organic frameworks

Proton conductivity in MOFs and COFs have been attracted due to their applicability as electrolytes in proton exchange membrane fuel cells. A short overview with recent updates on the structural features of MOFs and COFs for proton conduction are presented here.

A new honeycomb metal–carboxylate-tetrazolate framework with multiple functions for CO2 conversion and selective capture of C2H2, CO2 and benzene

A stable Cd-MOF was built by a carboxylate-tetrazolate ligand, which contains hexagonal channels and reveals multiple functions including separation of CO₂/CH₄, C₂H₂/CO₂, C₂H₂/CH₄ and benzene/cyclohexane, and catalytic conversion of CO₂ with epoxides.

The role of lattice vibration in the terahertz region for proton conduction in 2D metal-organic frameworks

We studied the relationship between proton conductivity and the terahertz-regime vibrations of two-dimensional MOFs. The results of spectroscopy studies clarified the essential role played by the collective motions in the terahertz region in 2D layers for efficient H⁺ conduction. Ab initio calculations suggested the collective motion to be predominantly determined by the valence electronic structure, depending on the identity of the metal ion.

Terahertz-regime vibrations of 2D MOFs dominate the intrinsic proton conductivity, and the motions depend on the valence electronic structures.

Water-Tolerant DUT-Series Metal-Organic Frameworks: A Theoretical-Experimental Study for the Chemical Fixation of CO2 and Catalytic Transfer Hydrogenation of Ethyl Levulinate to γ-Valerolactone

A series of highly thermally and hydrolytically stable porous solids with intriguing properties of zirconium- and hafnium-based metal-organic frameworks (MOFs) [Dresden University of Technology (DUT) series] was synthesized. The DUT MOFs were found to be effective catalysts for both epoxide-CO₂ cycloaddition reactions and the catalytic transfer hydrogenation (CTH) of ethyl levulinate (EL). In particular, 12-connected DUT-52(Zr) showed higher catalytic activity than eight- and six-connected catalysts in the synthesis of cyclic carbonates as well as in the production of γ-valerolactone (GVL). The secondary building unit connectivity, coexistence of a moderate number of acidic and basic sites, Brunauer-Emmett-Teller surface area, and combined effects of the pores of the MOFs seem to influence the catalytic activity. The reaction mechanism for the DUT-52(Zr)-mediated cycloaddition reaction of CO₂ and the CTH reactions were investigated in detail by using periodic density functional theory calculations. To the best of our knowledge, this is the first detailed computational study for the formation of GVL from EL by using MOF as the catalyst. In addition, grand canonical Monte Carlo simulations predicted the strong interaction of CO₂ molecules with the DUT-52(Zr) framework. Remarkably, the DUT-series catalysts possess extraordinary tolerance toward water. Further, DUT-52(Zr) is recyclable and is an efficient catalyst for cycloaddition and CTH reactions for at least five uses without obvious reductions in the activity or structural integrity.

Atomic- and Molecular-Level Design of Functional Metal-Organic Frameworks (MOFs) and Derivatives for Energy and Environmental Applications

Continuing population growth and accelerated fossil-fuel consumption with recent technological advancements have engendered energy and environmental concerns, urging researchers to develop advanced functional materials to overcome the associated problems. Metal-organic frameworks (MOFs) have emerged as frontier materials due to their unique porous organic-inorganic hybrid periodic assembly and exceptional diversity in structural properties and chemical functionalities. In particular, the modular nature and modularity-dependent activity of MOFs and MOF derivatives have accentuated the delicate atomic- and molecular design and synthesis of MOFs, and their meticulous conversion into carbons and transition-metal-based materials. Synthetic control over framework architecture, content, and reactivity has led to unprecedented merits relevant to various energy and environmental applications. Herein, an overview of the atomic- and molecular-design strategies of MOFs to realize application-targeted properties is provided. Recent progress on the development of MOFs and MOF derivatives based on these strategies, along with their performance, is summarized with a special emphasis on design-structure and functionality-activity relationships. Next, the respective energy- and environmental-related applications of catalysis and energy storage, as well as gas storage-separation and water harvesting with close association to the energy-water-environment nexus are highlighted. Last, perspectives on current challenges and recommendations for further development of MOF-based materials are also discussed.

Improving MOF stability: approaches and applications

This review summarizes recent advances in the design and synthesis of stable MOFs and highlights the relationships between the stability and functional applications.

Metal–organic frameworks (MOFs) have been recognized as one of the most important classes of porous materials due to their unique attributes and chemical versatility. Unfortunately, some MOFs suffer from the drawback of relatively poor stability, which would limit their practical applications. In the recent past, great efforts have been invested in developing strategies to improve the stability of MOFs. In general, stable MOFs possess potential toward a broader range of applications. In this review, we summarize recent advances in the design and synthesis of stable MOFs and MOF-based materials via de novo synthesis and/or post-synthetic structural processing. Also, the relationships between the stability and functional applications of MOFs are highlighted, and finally, the subsisting challenges and the directions that future research in this field may take have been indicated.

A Metal-Organic Framework Thin Film for Selective Mg2+ Transport

The incompatibility between the anode and the cathode chemistry limits the used of Mg as an anode. This issue may be addressed by separating the anolyte and the catholyte with a membrane that only allows for Mg²⁺ transport. Mg-MOF-74 thin films were used as the separator for this purpose. It was shown to meet the needs of low-resistance, selective Mg²⁺ transport. The uniform MOF thin films supported on Au substrate with thicknesses down to ca. 202 nm showed an intrinsic resistance as low as 6.4 Ω cm² , with the normalized room-temperature ionic conductivity of ca. 3.17×10^-6  S cm^-1 . When synthesized directly onto a porous anodized aluminum oxide (AAO) support, the resulting films were used as a standalone membrane to permit stable, low-overpotential Mg striping and plating for over 100 cycles at a current density of 0.05 mA cm^-2 . The film was effective in blocking solvent molecules and counterions from crossing over for extended period of time.

Ultrahigh Proton Conduction in Two Highly Stable Ferrocenyl Carboxylate Frameworks

Nowadays, although research of proton conductive materials has been extended from traditional sulfonated polymers to novel crystalline solid materials such as MOFs, COFs, and HOFs, research on crystalline ferrocene-based carboxylate materials is very limited. Herein, we selected two hydrogen-bonded and π-π interactions-supported ferrocenyl carboxylate frameworks (FCFs), [FcCO(CH₂)₂COOH] (FCF 1) and [FcCOOH] (FCF 2) (Fc = (η⁵-C₅H₅)Fe(η⁵-C₅H₄)) to fully investigate their water-mediated proton conduction. Their excellent thermal, water, and chemical stabilities were confirmed by the means of thermogravimetric analyses, PXRD, and SEM determinations. The two FCFs indicate temperature- and humidity-dependent proton conductive features. Intriguingly, their ultrahigh proton conductivities are 1.17 × 10^-1 and 1.01 × 10^-2 S/cm, respectively, under 100 °C and 98% RH, which not only are comparable to the commercial Nafion membranes but also rank among the highest performing MOFs, HOFs, and COFs ever described. On the basis of the structural analysis, calculated E_a value, H₂O vapor adsorption, PXRD, and SEM measurements, reasonable conduction mechanisms are highlighted. Our research provides a novel inspiration for finding new high proton conducting crystalline solid materials. Importantly, the outstanding conducting performance of 1 and 2 suggests their, hopefully, potential in fuel cells and related electrochemical fields.