Interference with the contractile machinery of the fibroblastic chondrocyte cytoskeleton induces re-expression of the cartilage phenotype through involvement of PI3K, PKC and MAPKs

Chondrocytes rapidly lose their phenotypic expression of collagen II and aggrecan when grown on 2D substrates. It has generally been observed that a fibroblastic morphology with strong actin-myosin contractility inhibits chondrogenesis, whereas chondrogenesis may be promoted by depolymerization of the stress fibers and/or disruption of the physical link between the actin stress fibers and the ECM, as is the case in 3D hydrogels. Here we studied the relationship between the actin-myosin cytoskeleton and expression of chondrogenic markers by culturing fibroblastic chondrocytes in the presence of cytochalasin D and staurosporine. Both drugs induced collagen II re-expression; however, renewed glycosaminoglycan synthesis could only be observed upon treatment with staurosporine. The chondrogenic effect of staurosporine was augmented when blebbistatin, an inhibitor of myosin/actin contractility, was added to the staurosporine-stimulated cultures. Furthermore, in 3D alginate cultures, the amount of staurosporine required to induce chondrogenesis was much lower compared to 2D cultures (0.625 nM vs. 2.5 nM). Using a selection of specific signaling pathway inhibitors, it was found that PI3K-, PKC- and p38-MAPK pathways positively regulated chondrogenesis while the ERK-pathway was found to be a negative regulator in staurosporine-induced re-differentiation, whereas down-regulation of ILK by siRNA indicated that ILK is not determining for chondrocyte re-differentiation. Furthermore, staurosporine analog midostaurin displayed only a limited chondrogenic effect, suggesting that activation/deactivation of a specific set of key signaling molecules can control the expression of the chondrogenic phenotype. This study demonstrates the critical importance of mechanobiological factors in chondrogenesis suggesting that the architecture of the actin cytoskeleton and its contractility control key signaling molecules that determine whether the chondrocyte phenotype will be directed along a fibroblastic or chondrogenic path.

Regulation of PTHrP expression by cyclic mechanical strain in postnatal growth plate chondrocytes

Mechanical loading has been widely considered to be a crucial regulatory factor for growth plate development, but the exact mechanisms of this regulation are still not completely understood. In the growth plate, parathyroid hormone-related protein (PTHrP) regulates chondrocyte differentiation and longitudinal growth. Cyclic mechanical strain has been demonstrated to influence growth plate chondrocyte differentiation and metabolism, whereas the relationship between cyclic mechanical strain and PTHrP expression is not clear. The objective of this study was to investigate whether short-term cyclic tensile strain regulates PTHrP expression in postnatal growth plate chondrocytes in vitro and to explore whether the organization of cytoskeletal F-actin microfilaments is involved in this process. To this end, we obtained growth plate chondrocytes from 2-week-old Sprague-Dawley rats and sorted prehypertrophic and hypertrophic chondrocytes using immunomagnetic beads coated with anti-CD200 antibody. The sorted chondrocytes were subjected to cyclic tensile strain of varying magnitude and duration at a frequency of 0.5 Hz. We found that cyclic strain regulates PTHrP expression in a magnitude- and time-dependent manner. Incubation of chondrocytes with cytochalasin D, an actin microfilament-disrupting reagent, blocked the induction of PTHrP expression in response to strain. The results suggest that short-term cyclic tensile strain induces PTHrP expression in postnatal growth plate prehypertrophic and hypertrophic chondrocytes and that PTHrP expression by these chondrocytes may subsequently affect growth plate development. The results also support the idea that the organization of cytoskeletal F-actin microfilaments plays an important role in mechanotransduction.

Analyses of a gravistimulation-specific Ca2+ signature in Arabidopsis using parabolic flights

Gravity is a critical environmental factor affecting the morphology and functions of organisms on the Earth. Plants sense changes in the gravity vector (gravistimulation) and regulate their growth direction accordingly. In Arabidopsis (Arabidopsis thaliana) seedlings, gravistimulation, achieved by rotating the specimens under the ambient 1g of the Earth, is known to induce a biphasic (transient and sustained) increase in cytoplasmic calcium concentration ([Ca(2+)]c). However, the [Ca(2+)]c increase genuinely caused by gravistimulation has not been identified because gravistimulation is generally accompanied by rotation of specimens on the ground (1g), adding an additional mechanical signal to the treatment. Here, we demonstrate a gravistimulation-specific Ca(2+) response in Arabidopsis seedlings by separating rotation from gravistimulation by using the microgravity (less than 10(-4)g) conditions provided by parabolic flights. Gravistimulation without rotating the specimen caused a sustained [Ca(2+)]c increase, which corresponds closely to the second sustained [Ca(2+)]c increase observed in ground experiments. The [Ca(2+)]c increases were analyzed under a variety of gravity intensities (e.g. 0.5g, 1.5g, or 2g) combined with rapid switching between hypergravity and microgravity, demonstrating that Arabidopsis seedlings possess a very rapid gravity-sensing mechanism linearly transducing a wide range of gravitational changes (0.5g-2g) into Ca(2+) signals on a subsecond time scale.

The optimal combination of substrate chemistry with physiological fluid shear stress

Osteoblasts on implanted biomaterials sense both substrate chemistry and mechanical stimulus. The effects of substrate chemistry alone and mechanical stimulus alone on osteoblasts have been widely studied. This study investigates the optimal combination of substrate chemistry and 12dyn/cm(2) physiological flow shear stress (FSS) by examining their influences on primary rat osteoblasts (ROBs), including the releases of ATP, nitric oxide (NO), and prostaglandin E2 (PGE2). Self-assembled monolayers (SAMs) on glass slides with -OH, -CH3, and -NH2 were employed to provide various substrate chemistries, whereas a parallel-plate fluid flow system produced the physiological FSS. Substrate chemistry alone exerted no observable effects on the releases of ATP, NO, and PGE2. Nevertheless, when ROBs were exposed to both substrate chemistry and FSS, the ATP releases of NH2 were upregulated about 12-fold compared to substrate chemistry alone, while the ATP releases of CH3 and OH was similarly increased 7-fold at the peak. Similar trends were observed for the releases of NO and PGE2. The expressions of ATP, NO, and PGE2 followed the pattern of NH2-FSS>Glass-FSS>CH3-FSS≈OH-FSS. ROBs on NH2 produced the optimal combination of substrate chemistry with the physiological FSS. The F-actin organization and focal adhesion (FA) formation of ROBs on various SAMs without FSS were examined. NH2 produced the best results whereas CH3 and OH produced the worst ones. Inhibition of FAs and/or disruption of F-actin significantly decreased the releases of FSS-induced PGE2, NO, and/or ATP. Consequently, a mechanism was proposed that the best F-actin organization and FA formation of ROBs on NH2 lead to the optimal combination of substrate chemistry with the 12dyn/cm(2) physiological FSS. This mechanism gives guidance for the design of implanted biomaterials and bioreactors for bone tissue engineering.

The ion channels to cytoskeleton connection as potential mechanism of mechanosensitivity

As biological force-sensing systems mechanosensitive (MS) ion channels present the best example of coupling molecular dynamics of membrane proteins to the mechanics of the surrounding cell membrane. In animal cells MS channels have over the past two decades been very much in focus of mechanotransduction research. In recent years this helped to raise awareness of basic and medical researchers about the role that abnormal MS channels may play in the pathophysiology of diseases, such as cardiac hypertrophy, atrial fibrillation, muscular dystrophy or polycystic kidney disease. To date a large number of MS channels from organisms of diverse phylogenetic origins have been identified at the molecular level; however, the structure of only few of them has been determined. Although their function has extensively been studied in a great variety of cells and tissues by different experimental approaches it is, with exception of bacterial MS channels, very little known about how these channels sense mechanical force and which cellular components may contribute to their function. By focusing on MS channels found in animal cells this article discusses the ways in which the connections between cytoskeleton and ion channels may contribute to mechanosensory transduction in these cells. This article is part of a Special Issue entitled: Reciprocal influences between cell cytoskeleton and membrane channels, receptors and transporters. This article is part of a Special Issue entitled: Reciprocal influences between cell cytoskeleton and membrane channels, receptors and transporters. Guest Editor: Jean Claude Hervé.

Mechanically induced deformation and strain dynamics in actin stress fibers

It is becoming evident that physical forces in the microenvironment play a key role in regulating many important aspects of cell biology. However, although mechanical cues are known to have clear effects over the long-term (days), the short-term (seconds to minutes) cellular responses to mechanical stimuli are less well characterized. In our recent study, we exposed committed fibroblast cells to well controlled nanoscale forces while simultaneously imaging force transduction through the actin cytoskeleton. One of the earliest responses of a cell to physical force is rapid deformation of the cytoskeleton, taking place over the course of seconds. We were able to directly visualize deformation, force-propagation and strain dynamics in actin stress fibers in response to a relatively simple mechanical stimulus. Moreover, these dynamics were also dependent on myosin-driven contractility and the presence of an intact microtubule cytoskeleton. Interestingly, although stem cells are sensitive to mechanical cues, they do not display the same degree of stress fiber organization as observed in committed cells indicating the possibility of alternative sensing and mechanotransduction mechanisms.

Involvement of the sieve element cytoskeleton in electrical responses to cold shocks

This study dealt with the visualization of the sieve element (SE) cytoskeleton and its involvement in electrical responses to local cold shocks, exemplifying the role of the cytoskeleton in Ca(2+)-triggered signal cascades in SEs. High-affinity fluorescent phalloidin as well as immunocytochemistry using anti-actin antibodies demonstrated a fully developed parietal actin meshwork in SEs. The involvement of the cytoskeleton in electrical responses and forisome conformation changes as indicators of Ca(2+) influx was investigated by the application of cold shocks in the presence of diverse actin disruptors (latrunculin A and cytochalasin D). Under control conditions, cold shocks elicited a graded initial voltage transient, ΔV1, reduced by external La(3+) in keeping with the involvement of Ca(2+) channels, and a second voltage transient, ΔV2. Cytochalasin D had no effect on ΔV1, while ΔV1 was significantly reduced with 500 nm latrunculin A. Forisome dispersion was triggered by cold shocks of 4°C or greater, which was indicative of an all-or-none behavior. Forisome dispersion was suppressed by incubation with latrunculin A. In conclusion, the cytoskeleton controls cold shock-induced Ca(2+) influx into SEs, leading to forisome dispersion and sieve plate occlusion in fava bean (Vicia faba).

Tendon mechanobiology: experimental models require mathematical underpinning

Mathematical and computational modeling is in demand to help address current challenges in mechanobiology of musculoskeletal tissues. In particular for tendon, the high clinical importance of the tissue, the huge mechanical demands placed on it and its ability to adapt to these demands, require coupled, multiscale models incorporating complex geometrical and microstructural information as well as time-based descriptions of cellular activity and response.This review introduces the information sources required to develop such multiscale models. It covers tissue structure and biomechanics, cell biomechanics, the current understanding of tendon's ability in health and disease to update its properties and structure and the few already existing multiscale mechanobiological models of the tissue. Finally, a sketch is provided of what such models could achieve ideally, pointing out where experimental data and knowledge are still missing.

The mechanical environment modulates intracellular calcium oscillation activities of myofibroblasts

Myofibroblast contraction is fundamental in the excessive tissue remodeling that is characteristic of fibrotic tissue contractures. Tissue remodeling during development of fibrosis leads to gradually increasing stiffness of the extracellular matrix. We propose that this increased stiffness positively feeds back on the contractile activities of myofibroblasts. We have previously shown that cycles of contraction directly correlate with periodic intracellular calcium oscillations in cultured myofibroblasts. We analyze cytosolic calcium dynamics using fluorescent calcium indicators to evaluate the possible impact of mechanical stress on myofibroblast contractile activity. To modulate extracellular mechanics, we seeded primary rat subcutaneous myofibroblasts on silicone substrates and into collagen gels of different elastic modulus. We modulated cell stress by cell growth on differently adhesive culture substrates, by restricting cell spreading area on micro-printed adhesive islands, and depolymerizing actin with Cytochalasin D. In general, calcium oscillation frequencies in myofibroblasts increased with increasing mechanical challenge. These results provide new insight on how changing mechanical conditions for myofibroblasts are encoded in calcium oscillations and possibly explain how reparative cells adapt their contractile behavior to the stresses occurring in normal and pathological tissue repair.

Transformation of keloids is determined by stress occurrence patterns on peri-keloid regions in response to body movement

Keloids gradually change their shapes as they grow. We hypothesize that the change of keloid morphology reflects the incremental change of the stress patterns occurring in peri-keloid regions due to movement of the keloid-carrying body part. To examine the validity of this hypothesis, we used three-dimensional finite element analysis to calculate the stresses occurring in the peri-keloid regions of keloids on the chest in response to respiratory movement. The stresses concentrate at the peri-keloid regions close to the bilateral ends of the keloids. By reviewing this result in reference to our hypothesis, we can explain why keloids on the chest are likely to present crab or butterfly shapes. Although we know that keloids grow in response to mechanical stresses, our hypothesis differs from existing ones in that it focuses on morphological transformation. Our hypothesis is helpful for physicians in performing treatment for keloids, because they can predict what part of a keloid is likely to grow and perform preventive treatment in reference to the hypothesis.

Microfluidics study of intracellular calcium response to mechanical stimulation on single suspension cells

A microfluidic microdevice was developed to exert mechanical stimulation on an individual suspension cell for mechanosensation research. In this microfluidic chip, an individual cell was isolated from a population of cells, and trapped in a microchannel with a compressive component made of a deflectable membrane. The mechanosensation of HL60 cells (leukemic cells) was studied using this chip, and the results showed that mechanical stimulations could trigger extracellular calcium to flow into HL60 cells through ion channels on cell membranes. The tension on individual HL60 cells exerted by the microdevice was showed large variations in the threshold of mechanosensation activation. In contrast to previous reports using patch clamp technique, there was little influence of cytoskeleton interruption on HL60 cell mechanosensation triggered by whole-cell compression. Additionally, two functional units were integrated in one chip for carrying out mechanosensation study in parallel, where HL60 cells (leukemic cells) and Jurkat cells (lymphocytes) were shown to respond to mechanical stimulation with different kinetics. The results demonstrated that the microfluidic device provides a novel approach to investigating the mechanosensation of single suspension cells in high-throughput.

The role of transcription-independent damage signals in the initiation of epithelial wound healing

Wound healing is an essential biological process that comprises sequential steps aimed at restoring the architecture and function of damaged cells and tissues. This process begins with conserved damage signals, such as Ca(2+), hydrogen peroxide (H2O2) and ATP, that diffuse through epithelial tissues and initiate immediate gene transcription-independent cellular effects, including cell shape changes, the formation of functional actomyosin structures and the recruitment of immune cells. These events integrate the ensuing transcription of specific wound response genes that further advance the wound healing response. The immediate importance of transcription-independent damage signals illustrates that healing a wound begins as soon as damage occurs.

Mechano-sensing by actin filaments and focal adhesion proteins

Mechanosensitive ion channels have long been the only established molecular class of cell mechanosensors with known molecular entities. However, recent advances in the state-of-the-art techniques, including single-molecule manipulation and imaging, have enabled an investigation of non-channel type cell mechanosensors and the underlying biophysical mechanisms of their activation. To date, two focal adhesion proteins, talin and p130Cas, have been postulated to act as putative mechanosensors, acting through mechano-induced unfolding of their particular soft domain(s) susceptible to phosphorylation. More recently, the actin filament has been demonstrated to act as a mechanosensor in the presence of the soluble actin-severing protein, cofilin. The cofilin severing activity negatively depends on the tension in the actin filament through tension-dependent binding/unbinding of cofilin to/from the actin filament. As a result, relaxed actin filaments are severed, while tensed ones are either not severed or severed after a long delay. Here we review the latest progress in the mechanosensing by non-channel type proteins and discuss the possible physiological roles of the mechanosensing performed by actin filaments in the course of cell migration.

Gravitropism and mechanical signaling in plants

Mechanical stress is a critical signal affecting morphogenesis and growth and is caused by a large variety of environmental stimuli such as touch, wind, and gravity in addition to endogenous forces generated by growth. On the basis of studies dating from the early 19th century, the plant mechanical sensors and response components related to gravity can be divided into two types in terms of their temporal character: sensors of the transient stress of reorientation (phasic signaling) and sensors capable of monitoring and responding to the extended, continuous gravitropic signal for the duration of the tropic growth response (tonic signaling). In the case of transient stress, changes in the concentrations of ions in the cytoplasm play a central role in mechanosensing and are likely a key component of initial gravisensing. Potential candidates for mechanosensitive channels have been identified in Arabidopsis thaliana and may provide clues to these rapid, ionic gravisensing mechanisms. Continuous mechanical stress, on the other hand, may be sensed by other mechanisms in addition to the rapidly adapting mechnaosensitive channels of the phasic system. Sustaining such long-term responses may be through a network of biochemical signaling cascades that would therefore need to be maintained for the many hours of the growth response once they are triggered. However, classical physiological analyses and recent simulation studies also suggest involvement of the cytoskeleton in sensing/responding to long-term mechanoresponse independently of the biochemical signaling cascades triggered by initial graviperception events.

Multifunctional ferromagnetic disks for modulating cell function

In this work, we focus on the methods for controlling cell function with ferromagnetic disk-shaped particles. We will first review the history of magnetically assisted modulation of cell behavior and applications of magnetic particles for studying physical properties of a cell. Then, we consider the biological applications of the microdisks such as the method for induction of cancer cell apoptosis, controlled drug release, hyperthermia and MRI imaging.

Physically based principles of cell adhesion mechanosensitivity in tissues

The minimal structural unit that defines living organisms is a single cell. By proliferating and mechanically interacting with each other, cells can build complex organization such as tissues that ultimately organize into even more complex multicellular living organisms, such as mammals, composed of billions of single cells interacting with each other. As opposed to passive materials, living cells actively respond to the mechanical perturbations occurring in their environment. Tissue cell adhesion to its surrounding extracellular matrix or to neighbors is an example of a biological process that adapts to physical cues. The adhesion of tissue cells to their surrounding medium induces the generation of intracellular contraction forces whose amplitude adapts to the mechanical properties of the environment. In turn, solicitation of adhering cells with physical forces, such as blood flow shearing the layer of endothelial cells in the lumen of arteries, reinforces cell adhesion and impacts cell contractility. In biological terms, the sensing of physical signals is transduced into biochemical signaling events that guide cellular responses such as cell differentiation, cell growth and cell death. Regarding the biological and developmental consequences of cell adaptation to mechanical perturbations, understanding mechanotransduction in tissue cell adhesion appears as an important step in numerous fields of biology, such as cancer, regenerative medicine or tissue bioengineering for instance. Physicists were first tempted to view cell adhesion as the wetting transition of a soft bag having a complex, adhesive interaction with the surface. But surprising responses of tissue cell adhesion to mechanical cues challenged this view. This, however, did not exclude that cell adhesion could be understood in physical terms. It meant that new models and descriptions had to be created specifically for these biological issues, and could not straightforwardly be adapted from dead matter. In this review, we present physical concepts of tissue cell adhesion and the unexpected cellular responses to mechanical cues such as external forces and stiffness sensing. We show how biophysical approaches, both experimentally and theoretically, have contributed to our understanding of the regulation of cellular functions through physical force sensing mechanisms. Finally, we discuss the different physical models that could explain how tissue cell adhesion and force sensing can be coupled to internal mechanosensitive processes within the cell body.

Force transduction and strain dynamics in actin stress fibres in response to nanonewton forces

It is becoming clear that mechanical stimuli are crucial factors in regulating the biology of the cell, but the short-term structural response of a cell to mechanical forces remains relatively poorly understood. We mechanically stimulated cells transiently expressing actin-EGFP with controlled forces (0-20 nN) in order to investigate the structural response of the cell. Two clear force-dependent responses were observed: a short-term (seconds) local deformation of actin stress fibres and a long-term (minutes) force-induced remodelling of stress fibres at cell edges, far from the point of contact. By photobleaching markers along stress fibres we were also able to quantify strain dynamics occurring along the fibres throughout the cell. The results reveal that the cell exhibits complex heterogeneous negative and positive strain fluctuations along stress fibres in resting cells that indicate localized contraction and stretch dynamics. The application of mechanical force results in the activation of myosin contractile activity reflected in an ~50% increase in strain fluctuations. This approach has allowed us to directly observe the activation of myosin in response to mechanical force and the effects of cytoskeletal crosslinking on local deformation and strain dynamics. The results demonstrate that force application does not result in simplistic isotropic deformation of the cytoarchitecture, but rather a complex and localized response that is highly dependent on an intact microtubule network. Direct visualization of force-propagation and stress fibre strain dynamics have revealed several crucial phenomena that take place and ultimately govern the downstream response of a cell to a mechanical stimulus.

Engineering microscale topographies to control the cell-substrate interface

Cells in their in vivo microenvironment constantly encounter and respond to a multitude of signals. While the role of biochemical signals has long been appreciated, the importance of biophysical signals has only recently been investigated. Biophysical cues are presented in different forms including topography and mechanical stiffness imparted by the extracellular matrix and adjoining cells. Microfabrication technologies have allowed for the generation of biomaterials with microscale topographies to study the effect of biophysical cues on cellular function at the cell-substrate interface. Topographies of different geometries and with varying microscale dimensions have been used to better understand cell adhesion, migration, and differentiation at the cellular and sub-cellular scales. Furthermore, quantification of cell-generated forces has been illustrated with micropillar topographies to shed light on the process of mechanotransduction. In this review, we highlight recent advances made in these areas and how they have been utilized for neural, cardiac, and musculoskeletal tissue engineering application.

Mechanosensitive Ca(2+) permeant cation channels in human prostate tumor cells

The acquisition of cell motility plays a critical role in the spread of prostate cancer (PC), therefore, identifying a sensitive step that regulates PC cell migration should provide a promising target to block PC metastasis. Here, we report that a mechanosensitive Ca(2+)-permeable cation channel (MscCa) is expressed in the highly migratory/invasive human PC cell line, PC-3 and that inhibition of MscCa by Gd(3+) or GsMTx-4 blocks PC-3 cell migration and associated elevations in [Ca(2+)](i). Genetic suppression or overexpression of specific members of the canonical transient receptor potential Ca(2+) channel family (TRPC1 and TRPC3) also inhibit PC-3 cell migration, but they do so by mechanisms other that altering MscCa activity. Although LNCaP cells are nonmigratory, they also express relatively large MscCa currents, indicating that MscCa expression alone cannot confer motility on PC cells. MscCa in both cell lines show similar conductance and ion selectivity and both are functionally coupled via Ca(2+) influx to a small Ca(2+)-activated K(+) channel. However, MscCa in PC-3 and LNCaP cell patches show markedly different gating dynamics--while PC-3 cells typically express a sustained, non-inactivating MscCa current, LNCaP cells express a mechanically-fragile, rapidly inactivating MscCa current. Moreover, mechanical forces applied to the patch, can induce an irreversible transition from the transient to the sustained MscCa gating mode. Given that cancer cells experience increasing compressive and shear forces within a growing tumor, a similar shift in channel gating in situ would have significant effects on Ca(2+) signaling that may play a role in tumor progression.

Mechanoregulation of cytoskeletal dynamics by TRP channels

The ability of cells to respond to mechanical stimulation is crucial to a variety of biological processes, including cell migration, axonal outgrowth, perception of pain, cardiovascular responses and kidney physiology. The translation of mechanical cues into cellular responses, a process known as mechanotransduction, typically takes place in specialized multiprotein structures such as cilia, cell-cell or cell-matrix adhesions. Within these structures, mechanical forces such as shear stress and membrane stretch activate mechanosensitive proteins, which set off a series of events that lead to altered cell behavior. Members of the transient receptor potential (TRP) family of cation channels are emerging as important players in mechanotransductory pathways. Localized within mechanosensory structures, they are activated by mechanical stimuli and trigger fast as well as sustained cytoskeletal responses. In this review, we will provide an overview of how TRP channels affect cytoskeletal dynamics in various mechano-regulated processes.

Dynamic force-induced direct dissociation of protein complexes in a nuclear body in living cells

Despite past progress in understanding mechanisms of cellular mechanotransduction, it is unclear whether a local surface force can directly alter nuclear functions without intermediate biochemical cascades. Here we show that a local dynamic force via integrins results in direct displacements of coilin and SMN proteins in Cajal bodies and direct dissociation of coilin-SMN associated complexes. Spontaneous movements of coilin increase more than those of SMN in the same Cajal body after dynamic force application. Fluorescence resonance energy transfer changes of coilin-SMN depend on force magnitude, an intact F-actin, cytoskeletal tension, Lamin A/C, or substrate rigidity. Other protein pairs in Cajal bodies exhibit different magnitudes of fluorescence resonance energy transfer. Dynamic cyclic force induces tiny phase lags between various protein pairs in Cajal bodies, suggesting viscoelastic interactions between them. These findings demonstrate that dynamic force-induced direct structural changes of protein complexes in Cajal bodies may represent a unique mechanism of mechanotransduction that impacts on nuclear functions involved in gene expression.

Actin stress fibers--assembly, dynamics and biological roles

Actin filaments assemble into diverse protrusive and contractile structures to provide force for a number of vital cellular processes. Stress fibers are contractile actomyosin bundles found in many cultured non-muscle cells, where they have a central role in cell adhesion and morphogenesis. Focal-adhesion-anchored stress fibers also have an important role in mechanotransduction. In animal tissues, stress fibers are especially abundant in endothelial cells, myofibroblasts and epithelial cells. Importantly, recent live-cell imaging studies have provided new information regarding the mechanisms of stress fiber assembly and how their contractility is regulated in cells. In addition, these studies might elucidate the general mechanisms by which contractile actomyosin arrays, including muscle cell myofibrils and cytokinetic contractile ring, can be generated in cells. In this Commentary, we discuss recent findings concerning the physiological roles of stress fibers and the mechanism by which these structures are generated in cells.

Evidence of a large-scale mechanosensing mechanism for cellular adaptation to substrate stiffness

Cell migration plays a major role in many fundamental biological processes, such as morphogenesis, tumor metastasis, and wound healing. As they anchor and pull on their surroundings, adhering cells actively probe the stiffness of their environment. Current understanding is that traction forces exerted by cells arise mainly at mechanotransduction sites, called focal adhesions, whose size seems to be correlated to the force exerted by cells on their underlying substrate, at least during their initial stages. In fact, our data show by direct measurements that the buildup of traction forces is faster for larger substrate stiffness, and that the stress measured at adhesion sites depends on substrate rigidity. Our results, backed by a phenomenological model based on active gel theory, suggest that rigidity-sensing is mediated by a large-scale mechanism originating in the cytoskeleton instead of a local one. We show that large-scale mechanosensing leads to an adaptative response of cell migration to stiffness gradients. In response to a step boundary in rigidity, we observe not only that cells migrate preferentially toward stiffer substrates, but also that this response is optimal in a narrow range of rigidities. Taken together, these findings lead to unique insights into the regulation of cell response to external mechanical cues and provide evidence for a cytoskeleton-based rigidity-sensing mechanism.

Transcription factor regulation by mechanical stress

New technologies and interest in cell mechanics are generating exciting new discoveries about how material properties and forces affect biological structure and function. Mechanical forces are transduced via a variety of mechanisms, recently beginning to be revealed, into signals capable of altering cell function and structure. Responses to physical stimuli occur at multiple levels, from changes in the structures of single proteins to global cascades capable of altering cell proliferation and differentiation. This review describes recent findings in which physical stimuli were shown to modulate transcription factor activity, including that of armadillo/β-catenin, serum response factor (SRF), yes-associated protein (YAP) and nuclear factor κB (NF-κB).

Forcing stem cells to behave: a biophysical perspective of the cellular microenvironment

Physical factors in the local cellular microenvironment, including cell shape and geometry, matrix mechanics, external mechanical forces, and nanotopographical features of the extracellular matrix, can all have strong influences on regulating stem cell fate. Stem cells sense and respond to these insoluble biophysical signals through integrin-mediated adhesions and the force balance between intracellular cytoskeletal contractility and the resistant forces originated from the extracellular matrix. Importantly, these mechanotransduction processes can couple with many other potent growth-factor-mediated signaling pathways to regulate stem cell fate. Different bioengineering tools and microscale/nanoscale devices have been successfully developed to engineer the physical aspects of the cellular microenvironment for stem cells, and these tools and devices have proven extremely powerful for identifying the extrinsic physical factors and their downstream intracellular signaling pathways that control stem cell functions.

Quantitative analysis of extension-torsion coupling of actin filaments

Actin filaments have a double-helix structure consisting of globular actin molecules. In many mechanical cellular activities, such as cell movement, division, and shape control, modulation of the extensional and torsional dynamics of the filament has been linked to regulatory actin-binding protein functions. Therefore, it is important to quantitatively evaluate extension-torsion coupling of filament to better understand the actin filament dynamics. In the present study, the extension-torsion coupling was investigated using molecular dynamics simulations. We constructed a model for the actin filament consisting of 14 actin subunits in an ionic solvent as a minimal functional unit, and analyzed longitudinal and twisting Brownian motions of the filament. We then derived the expected value of energy associated with extension and torsion at equilibrium, and evaluated the extension-torsion stiffness of the filament from the thermal fluctuations obtained from the MD simulations. The results demonstrated that as the analyzed sampling-window duration was increased, the extension-torsion coupling stiffness evaluated on a nanosecond scale tended to converge to a value of 7.6×10(-11) N. The results obtained from this study will contribute to the understanding of biomechanical events, under mechanical tension and torque, involving extension-torsion coupling of filaments.

Contractile equilibration of single cells to step changes in extracellular stiffness

Extracellular stiffness has been shown to alter long timescale cell behaviors such as growth and differentiation, but the cellular response to changes in stiffness on short timescales is poorly understood. By studying the contractile response of cells to dynamic stiffness conditions using an atomic force microscope, we observe a seconds-timescale response to a step change in extracellular stiffness. Specifically, we observe acceleration in contraction velocity (μm/min) and force rate (nN/min) upon a step decrease in stiffness and deceleration upon a step increase in stiffness. Interestingly, this seconds-timescale response to a change in extracellular stiffness is not altered by inhibiting focal adhesion signaling or stretch-activated ion channels and is independent of cell height and contraction force. Rather, the response timescale is altered only by disrupting cytoskeletal mechanics and is well described by a simple mechanical model of a constant velocity actuator pulling against an internal cellular viscoelastic network. Consistent with the predictions of this model, we find that an osmotically expanding hydrogel responds to step changes in extracellular stiffness in a similar manner to cells. We therefore propose that an initial event in stiffness sensing is establishment of a mechanical equilibrium that balances contraction of the viscoelastic cytoskeleton with deformation of the extracellular matrix.

The plasma membrane potential and the organization of the actin cytoskeleton of epithelial cells

The establishment and maintenance of the polarized epithelial phenotype require a characteristic organization of the cytoskeletal components. There are many cellular effectors involved in the regulation of the cytoskeleton of epithelial cells. Recently, modifications in the plasma membrane potential (PMP) have been suggested to participate in the modulation of the cytoskeletal organization of epithelia. Here, we review evidence showing that changes in the PMP of diverse epithelial cells promote characteristic modifications in the cytoskeletal organization, with a focus on the actin cytoskeleton. The molecular paths mediating these effects may include voltage-sensitive integral membrane proteins and/or peripheral proteins sensitive to surface potentials. The voltage dependence of the cytoskeletal organization seems to have implications in several physiological processes, including epithelial wound healing and apoptosis.

Force- and Ca2+-dependent internalization of integrins in cultured endothelial cells

The effects of mechanical force applied to the integrin clusters at focal contacts were examined in cultured human umbilical vein endothelial cells. When a fibronectin-coated glass bead was attached to the apical cell surface, focal contacts formed beneath the bead that became linked to focal contacts at the basal cell membrane by actin stress fibers in 5 minutes. Integrin dynamics at the basal focal contacts were monitored in live cells in response to a localized mechanical stimulus generated by displacing the glass bead. Traction force transmitted to the basal focal contacts through the stress fibers was monitored by measuring the deformation of the polyacrylamide gel substratum. The force declined in a few seconds, probably owing to decreases in the elastic modulus of the stress fibers. This transient mechanical stimulus caused the dephosphorylation of paxillin and disassembly of integrin clusters at the basal cell membrane in 20 minutes. The disassembly was mediated mainly by clathrin-dependent endocytosis of integrins. The integrin internalization was inhibited in Ca2+- and K+-free solution, and by phenylarsine oxide, a phosphatase inhibitor. These results suggest that a transient mechanical stimulus applied to focal contacts induces Ca2+-dependent dephosphorylation of some proteins, including paxillin, and facilitates clathrin-dependent endocytosis of integrins.

Calcium signaling in live cells on elastic gels under mechanical vibration at subcellular levels

A new device was designed to generate a localized mechanical vibration of flexible gels where human umbilical vein endothelial cells (HUVECs) were cultured to mechanically stimulate these cells at subcellular locations. A Fluorescence Resonance Energy Transfer (FRET)-based calcium biosensor (an improved Cameleon) was used to monitor the spatiotemporal distribution of intracellular calcium concentrations in the cells upon this mechanical stimulation. A clear increase in intracellular calcium concentrations over the whole cell body (global) can be observed in the majority of cells under mechanical stimulation. The chelation of extracellular calcium with EGTA or the blockage of stretch-activated calcium channels on the plasma membrane with streptomycin or gadolinium chloride significantly inhibited the calcium responses upon mechanical stimulation. Thapsigargin, an endoplasmic reticulum (ER) calcium pump inhibitor, or U73122, a phospholipase C (PLC) inhibitor, resulted in mainly local calcium responses occurring at regions close to the stimulation site. The disruption of actin filaments with cytochalasin D or inhibition of actomyosin contractility with ML-7 also inhibited the global calcium responses. Therefore, the global calcium response in HUVEC depends on the influx of calcium through membrane stretch-activated channels, followed by the release of inositol trisphosphate (IP3) via PLC activation to trigger the ER calcium release. Our newly developed mechanical stimulation device can also provide a powerful tool for the study of molecular mechanism by which cells perceive the mechanical cues at subcellular levels.

A novel method for measuring tension generated in stress fibers by applying external forces

The distribution of contractile forces generated in cytoskeletal stress fibers (SFs) contributes to cellular dynamic functions such as migration and mechanotransduction. Here we describe a novel (to our knowledge) method for measuring local tensions in SFs based on the following procedure: 1), known forces of different magnitudes are applied to an SF in the direction perpendicular to its longitudinal axis; 2), force balance equations are used to calculate the resulting tensions in the SF from changes in the SF angle; and 3), the relationship between tension and applied force thus established is extrapolated to an applied force of zero to determine the preexisting tension in the SF. In this study, we measured tensions in SFs by attaching magnetic particles to them and applying known forces with an electromagnetic needle. Fluorescence microscopy was used to capture images of SFs fluorescently labeled with myosin II antibodies, and analysis of these images allowed the tension in the SFs to be measured. The average tension measured in this study was comparable to previous reports, which indicates that this method may become a powerful tool for elucidating the mechanisms by which cytoskeletal tensions affect cellular functions.

Mechanical stimulation of epithelial cells using polypyrrole microactuators

The importance of mechanotransduction for physiological systems is becoming increasingly recognized. The effect of mechanical stimulation is well studied in organs and tissues, for instance by using flexible tissue culture substrates that can be stretched by external means. However, on the cellular and subcellular level, dedicated technology to apply appropriate mechanical stimuli is limited. Here we report an organic electronic microactuator chip for mechanical stimulation of single cells. These chips are manufactured on silicon wafers using traditional microfabrication and photolithography techniques. The active unit of the chip consists of the electroactive polymer polypyrrole that expands upon the application of a low potential. The fact that polypyrrole can be activated in physiological electrolytes makes it well suited as the active material in a microactuator chip for biomedical applications. Renal epithelial cells, which are responsive to mechanical stimuli and relevant from a physiological perspective, are cultured on top of the microactuator chip. The cells exhibit good adhesion and spread along the surface of the chip. After culturing, individual cells are mechanically stimulated by electrical addressing of the microactuator chip and the response to this stimulation is monitored as an increase in intracellular Ca(2+). This Ca(2+) response is caused by an autocrine ATP signalling pathway associated with mechanical stimulation of the cells. In conclusion, the present work demonstrates a microactuator chip based on an organic conjugated polymer, for mechanical stimulation of biological systems at the cellular and sub-cellular level.

Polycystins, focal adhesions and extracellular matrix interactions

Polycystic kidney disease is the most common heritable disease in humans. In addition to epithelial cysts in the kidney, liver and pancreas, patients with autosomal dominant polycystic kidney disease (ADPKD) also suffer from abdominal hernia, intracranial aneurysm, gastrointestinal cysts, and cardiac valvular defects, conditions often associated with altered extracellular matrix production or integrity. Despite more than a decade of work on the principal ADPKD genes, PKD1 and PKD2, questions remain about the basis of cystic disease and the role of extracellular matrix in ADPKD pathology. This review explores the links between polycystins, focal adhesions, and extracellular matrix gene expression. These relationships suggest roles for polycystins in cell-matrix mechanosensory signaling that control matrix production and morphogenesis. This article is part of a Special Issue entitled: Polycystic Kidney Disease.

Role of sarcolemmal BK(Ca) channels in stretch-induced extrasystoles in isolated chick hearts

BACKGROUND

It remains unclear whether sarcolemmal BK(Ca) channels in post-hatch chick ventricular myocytes contribute to stretch-induced extrasystoles (SIE), and whether they are stretch-activated BK(Ca) (SAK(Ca)) channels or a non-stretch-sensitive BK(Ca) variant.

METHODS AND RESULTS

To determine the role of sarcolemmal BK(Ca) channels in SIE and their stretch sensitivity, an isolated 2-week-old Langendorff-perfused chick heart and mathematical simulation were used. The ventricular wall was rapidly stretched by application of a volume change pulse. As the speed of the stretch increased, the probability of SIE also significantly increased, significantly shortening the delay between SIE and the initiation of the stretch. Application of 100 nmol/L of Grammostola spatulata mechanotoxin 4, a cation-selective stretch-activated channel (SAC) blocker, significantly decreased the probability of SIE. The application of Iberiotoxin, however, a BK(Ca) channel blocker, significantly increased the probability of SIE, suggesting that a K(+) efflux via a sarcolemmal BK(Ca) channel reduces SIE by balancing out stretch-induced cation influx via SACs. The simulation using a cardiomyocyte model combined with a new stretch sensitivity model that considers viscoelastic intracellular force transmission showed that stretch sensitivity in BK(Ca) channels is required to reproduce the present wet experimental results.

CONCLUSIONS

Sarcolemmal BK(Ca) channels in post-hatch chick ventricular myocytes are SAK(Ca) channels, and they have a suppressive effect on SIE.

Physiological validation of cell health upon probing with carbon nanotube endoscope and its benefit for single-cell interrogation

New-generation nanoscale devices for single-cell study are intensively being developed. As has been shown, nanodevices are minimally invasive because of their order-of-magnitude smaller size in comparison to conventional glass pipettes. However, in most studies the evaluation of the nanodevice impact on cell health has not extended to their effects on cell metabolic integrity. In this work we evaluated the degree to which the insertion of a carbon-based nanotube endoscope into a cell induces mechanical and biochemical stress, and affects cellular key metabolic systems. The effects of insertion of the nanotube endoscope on cell morphological and physiological modulations were monitored and compared to those of glass micropipettes. We report that nanotube endoscope insertion does not significantly modulate the plasma membrane and actin network. The cell metabolic mechanisms such as energy production and inositol 1,4,5-trisphosphate-dependent calcium signaling remain preserved for prolonged endoscope presence within a cell.

FROM THE CLINICAL EDITOR

In this basic science study, the effects of insertion of carbon nanotube endoscope on cell morphological and physiological modulations were monitored and compared to those of glass micropipettes. Nanotube endoscope insertion is truly minimally invasive: it does not significantly modulate the plasma membrane and actin network; the energy production and inositol 1,4,5-trisphosphate-dependent calcium signaling also remain preserved during prolonged endoscope presence within a cell.

(Questions)(n) on phloem biology. 1. Electropotential waves, Ca2+ fluxes and cellular cascades along the propagation pathway

This review explores the relationships between electrical long-distance signalling, Ca(2+) influx coincident with propagation of electropotential waves, and cellular responses to Ca(2+) influx including the consequences for sieve-tube conductivity and mass flow. Ca(2+) influx is inherent to electropotential waves and appears to constitute the key link between rapid physical signals and resultant chemical cascades in sieve tubes and adjacent cells. Members of several channel groups are likely involved the regulation of Ca(2+) levels in sieve elements. Among them are hyperpolarization-activated, depolarization-activated, and mechanosensitive Ca(2+) channels located in the plasma membrane and Ca(2+) dependent Ca(2+) channels that reside in ER-membranes of sieve elements. These channels collectively determine intracellular Ca(2+) levels in sieve elements and their neighbour cells. The latter cells react to Ca(2+) elevation by inducing diverse functional responses dependent on the cell type. If the Ca(2+) concentration in sieve elements surpasses a threshold level, dual sieve-plate occlusion by proteins and callose deposition is triggered. Occlusion is reversed when Ca(2+) levels subside. Electrical messages may regulate the degree of sieve plate hydraulic conductivity in intact plants by partial sieve-plate occlusion that has a major impact on volume flow through sieve tubes. Furthermore, complete but temporary occlusion of sieve tubes may modify mass flow patterns in intact plants.

Dynamic molecular processes mediate cellular mechanotransduction

Cellular responses to mechanical forces are crucial in embryonic development and adult physiology, and are involved in numerous diseases, including atherosclerosis, hypertension, osteoporosis, muscular dystrophy, myopathies and cancer. These responses are mediated by load-bearing subcellular structures, such as the plasma membrane, cell-adhesion complexes and the cytoskeleton. Recent work has demonstrated that these structures are dynamic, undergoing assembly, disassembly and movement, even when ostensibly stable. An emerging insight is that transduction of forces into biochemical signals occurs within the context of these processes. This framework helps to explain how forces of varying strengths or dynamic characteristics regulate distinct signalling pathways.

Aspect ratio determines the quantity of mesoporous silica nanoparticle uptake by a small GTPase-dependent macropinocytosis mechanism

Although the aspect ratio (AR) of engineered nanomaterials (ENMs) is one of the key physicochemical parameters that could determine biological outcome, not much is understood about how AR contributes to shaping biological outcome. By using a mesoporous silica nanoparticle (MSNP) library that has been constructed to cover a range of different lengths, we could demonstrate that the AR of rod-shaped particles determines the rate and abundance of MSNP uptake by a macropinocytosis process in HeLa and A549 cancer cell lines. MSNPs with an AR of 2.1-2.5 were taken up in larger quantities compared to shorter or longer length rods by a process that is sensitive to amiloride, cytochalasin D, azide, and 4 °C inhibition. The rods with intermediary AR also induced the maximal number of filopodia, actin polymerization, and activation of small GTP-binding proteins (e.g., Rac1, CDC42) that involve assembly of the actin cytoskeleton and filopodia formation. When assessing the role of AR in the delivery of paclitaxel or camptothecin, the rods with AR 2.1-2.5 were clearly more efficient for drug delivery and generation of cytotoxic killing in HeLa cells. All considered, our data suggest an active sensoring mechanism by which HeLa and A549 cells are capable of detecting AR differences in MSNP to the extent that accelerated macropinocytosis can be used to achieve more efficient drug delivery.

Direct detection of cellular adaptation to local cyclic stretching at the single cell level by atomic force microscopy

The cellular response to external mechanical forces has important effects on numerous biological phenomena. The sequences of molecular events that underlie the observed changes in cellular properties have yet to be elucidated in detail. Here we have detected the responses of a cultured cell against locally applied cyclic stretching and compressive forces, after creating an artificial focal adhesion under a glass bead attached to the cantilever of an atomic force microscope. The cell tension initially increased in response to the tensile stress and then decreased within ∼1 min as a result of viscoelastic properties of the cell. This relaxation was followed by a gradual increase in tension extending over several minutes. The slow recovery of tension ceased after several cycles of force application. This tension-recovering activity was inhibited when cells were treated with cytochalasin D, an inhibitor of actin polymerization, or with (-)-blebbistatin, an inhibitor of myosin II ATPase activity, suggesting that the activity was driven by actin-myosin interaction. To our knowledge, this is the first quantitative analysis of cellular mechanical properties during the process of adaptation to locally applied cyclic external force.