The structure of simian virus 40 refined at 3.1 A resolution

Association of simian virus 40 vp1 with 70-kilodalton heat shock proteins and viral tumor antigens

Proper folding of newly synthesized viral proteins in the cytoplasm is a prerequisite for the formation of infectious virions. The major capsid protein Vp1 of simian virus 40 forms a series of disulfide-linked intermediates during folding and capsid formation. In addition, we report here that Vp1 is associated with cellular chaperones (HSP70) and a cochaperone (Hsp40) which can be coimmunoprecipitated with Vp1. Studies in vitro demonstrated the ATP-dependent interaction of Vp1 and cellular chaperones. Interestingly, viral cochaperones LT and ST were essential for stable interaction of HSP70 with the core Vp1 pentamer Vp1 (22-303). LT and ST also coimmunoprecipitated with Vp1 in vivo. In addition to these identified (co)chaperones, stable, covalently modified forms of Vp1 were identified for a folding-defective double mutant, C49A-C87A, and may represent a "trapped" assembly intermediate. By a truncation of the carboxyl arm of Vp1 to prevent the Vp1 folding from proceeding beyond pentamers, we detected several apparently modified Vp1 species, some of which were absent in cells transfected with the folding-defective mutant DNA. These results suggest that transient covalent interactions with known or unknown cellular and viral proteins are important in the assembly process.

Identification of a neutralization epitope in the VP1 capsid protein of SV40

Three SV40 escape mutants were identified by selection in the presence of monoclonal antibodies with neutralizing activity. The VP1 amino acid alterations in these mutants were: (1) K73-->E (in loop BC); (2) D77-->E (in loop BC); (3) K171-->R (in loop EF); and (4) Q175-->H (in loop EF). These residues are clustered in close proximity to each other on the surface of the native capsid protein, strongly suggesting that they form a conformational epitope directly recognized by the neutralizing antibody. To our knowledge, the present study represents the first experimental mapping of a neutralization epitope of a polyomavirus family member. Structural information regarding the neutralization epitope should be useful for clarifying the extent of cross-reactivity exhibited by the humoral immune response towards related primate polyomaviruses (e.g., SV40, BKV, and JCV).

Possible role for cellular karyopherins in regulating polyomavirus and papillomavirus capsid assembly

Polyomavirus and papillomavirus (papovavirus) capsids are composed of 72 capsomeres of their major capsid proteins, VP1 and L1, respectively. After translation in the cytoplasm, L1 and VP1 pentamerize into capsomeres and are then imported into the nucleus using the cellular alpha and beta karyopherins. Virion assembly only occurs in the nucleus, and cellular mechanisms exist to prevent premature capsid assembly in the cytosol. We have identified the karyopherin family of nuclear import factors as possible "chaperones" in preventing the cytoplasmic assembly of papovavirus capsomeres. Recombinant murine polyomavirus (mPy) VP1 and human papillomavirus type 11 (HPV11) L1 capsomeres bound the karyopherin heterodimer alpha2beta1 in vitro in a nuclear localization signal (NLS)-dependent manner. Because the amino acid sequence comprising the NLS of VP1 and L1 overlaps the previously identified DNA binding domain, we examined the relationship between karyopherin and DNA binding of both mPy VP1 and HPV11 L1. Capsomeres of L1, but not VP1, bound by karyopherin alpha2beta1 or beta1 alone were unable to bind DNA. VP1 and L1 capsomeres could bind both karyopherin alpha2 and DNA simultaneously. Both VP1 and L1 capsomeres bound by karyopherin alpha2beta1 were unable to assemble into capsids, as shown by in vitro assembly reactions. These results support a role for karyopherins as chaperones in the in vivo regulation of viral capsid assembly.

Pancreatic acinar and islet cell infection by low-dose SV40 administration

OBJECTIVES

Viral vector uptake into the pancreas is rare. The few viral vectors reported to transduce in vivo pancreatic islets after systemic injection required additional physical measures, such as direct pancreatic injection or hepatic vessel clamping. Because pancreatic islet uptake of the human polyomavirus family member BK virus was previously reported in hamsters after systemic administration, we hypothesized that SV40, a polyomavirus member remarkably similar to BK virus, may also infect the pancreas.

METHODS

We injected intravenously a low dose of SV40, unaided by any other physical or chemical means, and evaluated viral uptake by pancreatic islets and pancreatic exocrine tissue via polymerase chain reaction, Western blot, electron microscopy, immunofluorescent microscopy, and protein A-gold immunocytochemistry.

RESULTS

Pancreatic uptake of SV40 was comparable to other major organs (ie, liver and spleen). SV40 viral particles were detected in both pancreatic islets and acini. In pancreatic islets, all islet cell types were infected by SV40, albeit the infection rate of glucagon-producing alpha cells surpassed beta- and delta-islet cells. Low-dose SV40 administration was not sufficient to induce heterologous gene expression in the pancreas.

CONCLUSIONS

Our study shows that pancreatic islet and acinar cell uptake of SV40 is feasible with a single, low-dose intravenous injection. However, this dose did not result in gene delivery into the murine pancreas.

Tilable nature of virus capsids and the role of topological constraints in natural capsid design

Virus capsids are highly specific assemblies that are formed from a large number of often chemically identical capsid subunits. In the present paper we ask to what extent these structures can be viewed as mathematically tilable objects using a single two-dimensional tile. We find that spherical viruses from a large number of families-eight out of the twelve studied-qualitatively possess properties that allow their representation as two-dimensional monohedral tilings of a bound surface, where each tile represents a subunit. This we did by characterizing the extent to which individual spherical capsids display subunit-subunit (1) holes, (2) overlaps, and (3) gross structural variability. All capsids with T numbers greater than 1 from the Protein Data Bank, with homogeneous protein composition, were used in the study. These monohedral tilings, called canonical capsids due to their platonic (mathematical) form, offer a mathematical segue into the structural and dynamical understanding of not one, but a large number of virus capsids. From our data, it appears as though one may only break the long-standing rules of quasiequivalence by the introduction of subunit-subunit structural variability, holes, and gross overlaps into the shell. To explore the utility of canonical capsids in understanding structural aspects of such assemblies, we used graph theory and discrete geometry to enumerate the types of shapes that the tiles (and hence the subunits) must possess. We show that topology restricts the shape of the face to a limited number of five-sided prototiles, one of which is the "bisected trapezoid" that is a platonic representation of the most ubiquitous capsid subunit shape seen in nature (the trapezoidal jelly-roll motif). This motif is found in a majority of seemingly unrelated virus families that share little to no host, size, or amino acid sequence similarity. This suggests that topological constraints may exhibit dominant roles in the natural design of biological assemblies, while having little effect on amino acid sequence similarity.

Structural basis of GM1 ganglioside recognition by simian virus 40

Simian virus 40 (SV40) has been a paradigm for understanding attachment and entry of nonenveloped viruses, viral DNA replication, and virus assembly, as well as for endocytosis pathways associated with caveolin and cholesterol. We find by glycan array screening that SV40 recognizes its ganglioside receptor GM1 with a quite narrow specificity, but isothermal titration calorimetry shows that individual binding sites have a relatively low affinity, with a millimolar dissociation constant. The high-resolution crystal structure of recombinantly produced SV40 capsid protein, VP1, in complex with the carbohydrate portion of GM1, reveals that the receptor is bound in a shallow solvent-exposed groove at the outer surface of the capsid. Through a complex network of interactions, VP1 recognizes a conformation of GM1 that is the dominant one in solution. Analysis of contacts provides a structural basis for the observed specificity and suggests binding mechanisms for additional physiologically relevant GM1 variants. Comparison with murine Polyomavirus (Polyoma) receptor complexes reveals that SV40 uses a different mechanism of sialic acid binding, which has implications for receptor binding of human polyomaviruses. The SV40-GM1 complex reveals a parallel to cholera toxin, which uses a similar cell entry pathway and binds GM1 in the same conformation.

Evidence that SV40 VP1-DNA interactions contribute to the assembly of 40-nm spherical viral particles

The simian virus 40 (SV40) particle is mainly composed of the major capsid protein termed VP1. VP1 self-assembles into virus-like particles (VLPs) of approximately 40 nm in diameter when over-expressed in bacteria or in insect cells, but purified VP1 does not form such a structure under physiological conditions, and thus, the mechanism of VP1 assembly is not well understood. Using a highly purified VP1 assembly/disassembly system in vitro, here we provide evidence that DNA is a factor that contributes to VP1 assembly into 40-nm spherical particles. At pH 5, for example, VP1 preferentially assembles into 40-nm particles in the presence of DNA, whereas VP1 assembles into tubular structures in the absence of DNA. Electron microscopic observations revealed that the concentration of DNA and its length are important for the formation of 40-nm particles. In addition, sucrose gradient sedimentation analysis and DNase I-sensitivity assays indicated that DNA of up to 2,000 bp is packaged into the 40-nm particles under the conditions examined. We propose that DNA may facilitate the formation of 40-nm spherical particles by acting as a scaffold that increases the local concentration of VP1 and/or by acting as an allosteric effector that alters the structure of VP1.

Simian Virus 40 depends on ER protein folding and quality control factors for entry into host cells

Cell entry of Simian Virus 40 (SV40) involves caveolar/lipid raft-mediated endocytosis, vesicular transport to the endoplasmic reticulum (ER), translocation into the cytosol, and import into the nucleus. We analyzed the effects of ER-associated processes and factors on infection and on isolated viruses and found that SV40 makes use of the thiol-disulfide oxidoreductases, ERp57 and PDI, as well as the retrotranslocation proteins Derlin-1 and Sel1L. ERp57 isomerizes specific interchain disulfides connecting the major capsid protein, VP1, to a crosslinked network of neighbors, thus uncoupling about 12 of 72 VP1 pentamers. Cryo-electron tomography indicated that loss of interchain disulfides coupled with calcium depletion induces selective dissociation of the 12 vertex pentamers, a step likely to mimic uncoating of the virus in the cytosol. Thus, the virus utilizes the protein folding machinery for initial uncoating before exploiting the ER-associated degradation machinery presumably to escape from the ER lumen into the cytosol.

Identification of a mutation in the SV40 capsid protein VP1 that influences plaque morphology, vacuolization, and receptor usage

A plaque variant of SV40 that was first isolated in the 1960s, designated SV40-LP(KT), was molecularly cloned and subjected to sequence analysis. The genome of SV40-LP(KT) was found to be nearly identical to the previously described isolate known as 777. However, SV40-LP(KT) contained a mutation in the VP1 coding region resulting in a change of histidine 136 to tyrosine. This VP1 mutation was identified as a genetic determinant influencing a number of phenotypes associated with SV40-LP(KT) such as plaque morphology, intracellular vacuole formation, and ganglioside receptor usage.

N-glycolyl GM1 ganglioside as a receptor for simian virus 40

Carbohydrate microarrays have emerged as powerful tools in analyses of microbe-host interactions. Using a microarray with 190 sequence-defined oligosaccharides in the form of natural glycolipids and neoglycolipids representative of diverse mammalian glycans, we examined interactions of simian virus 40 (SV40) with potential carbohydrate receptors. While the results confirmed the high specificity of SV40 for the ganglioside GM1, they also revealed that N-glycolyl GM1 ganglioside [GM1(Gc)], which is characteristic of simian species and many other nonhuman mammals, is a better ligand than the N-acetyl analog [GM1(Ac)] found in mammals, including humans. After supplementing glycolipid-deficient GM95 cells with GM1(Ac) and GM1(Gc) gangliosides and the corresponding neoglycolipids with phosphatidylethanolamine lipid groups, it was found that GM1(Gc) analogs conferred better virus binding and infectivity. Moreover, we visualized the interaction of NeuGc with VP1 protein of SV40 by molecular modeling and identified a conformation for GM1(Gc) ganglioside in complex with the virus VP1 pentamer that is compatible with its presentation as a membrane receptor. Our results open the way not only to detailed studies of SV40 infection in relation to receptor expression in host cells but also to the monitoring of changes that may occur with time in receptor usage by the virus.

High cooperativity of the SV40 major capsid protein VP1 in virus assembly

SV40 is a small, non enveloped DNA virus with an icosahedral capsid of 45 nm. The outer shell is composed of pentamers of the major capsid protein, VP1, linked via their flexible carboxy-terminal arms. Its morphogenesis occurs by assembly of capsomers around the viral minichromosome. However the steps leading to the formation of mature virus are poorly understood. Intermediates of the assembly reaction could not be isolated from cells infected with wt SV40. Here we have used recombinant VP1 produced in insect cells for in vitro assembly studies around supercoiled heterologous plasmid DNA carrying a reporter gene. This strategy yields infective nanoparticles, affording a simple quantitative transduction assay. We show that VP1 assembles under physiological conditions into uniform nanoparticles of the same shape, size and CsCl density as the wild type virus. The stoichiometry is one DNA molecule per capsid. VP1 deleted in the C-arm, which is unable to assemble but can bind DNA, was inactive indicating genuine assembly rather than non-specific DNA-binding. The reaction requires host enzymatic activities, consistent with the participation of chaperones, as recently shown. Our results demonstrate dramatic cooperativity of VP1, with a Hill coefficient of ∼6. These findings suggest that assembly may be a concerted reaction. We propose that concerted assembly is facilitated by simultaneous binding of multiple capsomers to a single DNA molecule, as we have recently reported, thus increasing their local concentration. Emerging principles of SV40 assembly may help understanding assembly of other complex systems. In addition, the SV40-based nanoparticles described here are potential gene therapy vectors that combine efficient gene delivery with safety and flexibility.

Identification of amino acid residues in BK virus VP1 that are critical for viability and growth

BK virus (BKV) is a ubiquitous pathogen that establishes a persistent infection in the urinary tract of 80% of the human population. Like other polyomaviruses, the major capsid protein of BKV, virion protein 1 (VP1), is critical for host cell receptor recognition and for proper virion assembly. BKV uses a carbohydrate complex containing alpha(2,3)-linked sialic acid attached to glycoprotein and glycolipid motifs as a cellular receptor. To determine the amino acids important for BKV binding to the sialic acid portion of the complex, we generated a series of 17 point mutations in VP1 and scored them for viral growth. The first set of mutants behaved identically to wild-type virus, suggesting that these amino acids were not critical for virus propagation. Another group of VP1 mutants rendered the virus nonviable. These mutations failed to protect viral DNA from DNase I digestion, indicating a role for these domains in capsid assembly and/or packaging of DNA. A third group of VP1 mutations packaged DNA similarly to the wild type but failed to propagate. The initial burst size of these mutations was similar to that of the wild type, indicating that there is no defect in the lytic release of the mutated virions. Binding experiments revealed that a subset of the BKV mutants were unable to attach to their host cells. These motifs are likely important for sialic acid recognition. We next mapped these mutations onto a model of BKV VP1 to provide atomic insight into the role of these sites in the binding of sialic acid to VP1.

Crystal structures of major envelope proteins VP26 and VP28 from white spot syndrome virus shed light on their evolutionary relationship

White spot syndrome virus (WSSV) is a virulent pathogen known to infect various crustaceans. It has bacilliform morphology with a tail-like appendage at one end. The envelope consists of four major proteins. Envelope structural proteins play a crucial role in viral infection and are believed to be the first molecules to interact with the host. Here, we report the localization and crystal structure of major envelope proteins VP26 and VP28 from WSSV at resolutions of 2.2 and 2.0 A, respectively. These two proteins alone account for approximately 60% of the envelope, and their structures represent the first two structural envelope proteins of WSSV. Structural comparisons among VP26, VP28, and other viral proteins reveal an evolutionary relationship between WSSV envelope proteins and structural proteins from other viruses. Both proteins adopt beta-barrel architecture with a protruding N-terminal region. We have investigated the localization of VP26 and VP28 using immunoelectron microscopy. This study suggests that VP26 and VP28 are located on the outer surface of the virus and are observed as a surface protrusion in the WSSV envelope, and this is the first convincing observation for VP26. Based on our studies combined with the literature, we speculate that the predicted N-terminal transmembrane region of VP26 and VP28 may anchor on the viral envelope membrane, making the core beta-barrel protrude outside the envelope, possibly to interact with the host receptor or to fuse with the host cell membrane for effective transfer of the viral infection. Furthermore, it is tempting to extend this host interaction mode to other structural viral proteins of similar structures. Our finding has the potential to extend further toward drug and vaccine development against WSSV.

Importance of calcium-binding site 2 in simian virus 40 infection

The exposure of molecular signals for simian virus 40 (SV40) cell entry and nuclear entry has been postulated to involve calcium coordination at two sites on the capsid made of Vp1. The role of calcium-binding site 2 in SV40 infection was examined by analyzing four single mutants of site 2, the Glu160Lys, Glu160Arg, Glu157Lys (E157K), and Glu157Arg mutants, and an E157K-E330K combination mutant. The last three mutants were nonviable. All mutants replicated viral DNA normally, and all except the last two produced particles containing all three capsid proteins and viral DNA. The defect of the site 1-site 2 E157K-E330K double mutant implies that at least one of the sites is required for particle assembly in vivo. The nonviable E157K particles, about 10% larger in diameter than the wild type, were able to enter cells but did not lead to T-antigen expression. Cell-internalized E157K DNA effectively coimmunoprecipitated with anti-Vp1 antibody, but little of the DNA did so with anti-Vp3 antibody, and none was detected in anti-importin immunoprecipitate. Yet, a substantial amount of Vp3 was present in anti-Vp1 immune complexes, suggesting that internalized E157K particles are ineffective at exposing Vp3. Our data show that E157K mutant infection is blocked at a stage prior to the interaction of the Vp3 nuclear localization signal with importins, consistent with a role for calcium-binding site 2 in postentry steps leading to the nuclear import of the infecting SV40.

A Dissection of the Protein–Protein Interfaces in Icosahedral Virus Capsids

We selected 49 icosahedral virus capsids whose crystal structures are reported in the Protein Data Bank. They belong to the T=1, T=3, pseudo T=3 and other lattice types. We identified in them 779 unique interfaces between pairs of subunits, all repeated by icosahedral symmetry. We analyzed the geometric and physical chemical properties of these interfaces and compared with interfaces in protein-protein complexes and homodimeric proteins, and with crystal packing contacts. The capsids contain one to 16 subunits implicated in three to 66 unique interfaces. Each subunit loses 40-60% of its accessible surface in contacts with an average of 8.5 neighbors. Many of the interfaces are very large with a buried surface area (BSA) that can exceed 10,000 A(2), yet 39% are small with a BSA<800 A(2) comparable to crystal packing contacts. Pairwise capsid interfaces overlap, so that one-third of the residues are part of more than one interface. Those with a BSA>800 A(2) resemble homodimer interfaces in their chemical composition. Relative to the protein surface, they are non-polar, enriched in aliphatic residues and depleted of charged residues, but not of neutral polar residues. They contain one H-bond per about 200 A(2) BSA. Small capsid interfaces (BSA<800 A(2)) are only slightly more polar. They have a similar amino acid composition, but they bury fewer atoms and contain fewer H-bonds for their size. Geometric parameters that estimate the quality of the atomic packing suggest that the small capsid interfaces are loosely packed like crystal packing contacts, whereas the larger interfaces are close-packed as in protein-protein complexes and homodimers. We discuss implications of these findings on the mechanism of capsid assembly, assuming that the larger interfaces form first to yield stable oligomeric species (capsomeres), and that medium-size interfaces allow the stepwise addition of capsomeres to build larger intermediates.

Minor capsid proteins of simian virus 40 are dispensable for nucleocapsid assembly and cell entry but are required for nuclear entry of the viral genome

We investigated the roles of simian virus 40 capsid proteins in the viral life cycle by analyzing point mutants in Vp1 and Vp2/3, as well as a deletion mutant lacking the Vp2/3 coding sequence. The Vp1 mutants (V243E and L245E) and the Vp2/3 mutants (F157E-I158E and P164R-G165E-G166R) were previously shown to be defective in Vp1-Vp2/3 interaction and to be noninfectious or poorly infectious, respectively. Here, we show that all these point mutants form stable particles following DNA transfection into cells. The Vp2/3-mutant particles contained very low levels of Vp2/3, whereas the Vp1 mutant particles contained no detectable Vp2/3. As expected, the deletion mutant also formed particles that were noninfectious. We further characterized the two Vp1 point mutants and the deletion mutant. All three mutant particles comprised Vp1 and histone-associated viral DNA, and all were able to enter cells. However, the mutant complexes failed to associate with host importins (owing to the loss of the Vp2/3 nuclear localization signal), and the mutant viral DNAs prematurely dissociated from the Vp1s, suggesting that the nucleocapsids did not enter the nucleus. Consistently, all three mutant particles failed to express large T antigen. Together, our results demonstrate unequivocally that Vp2/3 is dispensable for the formation of nucleocapsids. Further, the nucleocapsids' ability to enter cells implies that Vp1 contains the major determinants for cell attachment and entry. We propose that the major role of Vp2/3 in infectivity is to mediate the nuclear entry of viral DNA.

The role of sialic acid in human polyomavirus infections

JC virus (JCV) and BK virus (BKV) are human polyomaviruses that infect approximately 85% of the population worldwide [1,2]. JCV is the underlying cause of the fatal demyelinating disease, progressive multifocal leukoencephalopathy (PML), a condition resulting from JCV induced lytic destruction of myelin producing oligodendrocytes in the brain [3]. BKV infection of kidneys in renal transplant recipients results in a gradual loss of graft function known as polyomavirus associated nephropathy (PVN) [4]. Following the identification of these viruses as the etiological agents of disease, there has been greater interest in understanding the basic biology of these human pathogens [5,6]. Recent advances in the field have shown that viral entry of both JCV and BKV is dependent on the ability to interact with sialic acid. This review focuses on what is known about the human polyomaviruses and the role that sialic acid plays in determining viral tropism.

Assemblages of simian virus 40 capsid proteins and viral DNA visualized by electron microscopy

SV40 assembles in the nucleus by addition of capsid proteins to the minichromosome. The VP15VP2/3 capsomer is composed of a pentamer of the major protein VP1 complexed with a monomer of a minor protein, VP2 or VP3. In the capsid, the capsomers are bound together via their flexible carboxy-terminal arms. Our previous studies suggested that the capsomers are recruited to the packaging signal ses via avid interaction with Sp1. During assembly Sp1 is displaced, allowing chromatin compaction. Here we investigated the interactions in vitro of VP1(5)VP2/3 capsomers with the entire SV40 genome, using mutant VP1 deleted in the carboxy-arm that cannot assemble, but retains DNA-binding capacity. EM revealed that VP1(5)VP2/3 complexes bind non-specifically at random locations around the DNA. Sp1 was absent from mature virions. The findings suggest that multiple capsomers attach simultaneously to the viral genome, increasing their local concentration, facilitating rapid, concerted assembly reaction and removal of Sp1.

Identification of amino acid residues within simian virus 40 capsid proteins Vp1, Vp2, and Vp3 that are required for their interaction and for viral infection

Interaction of simian virus 40 (SV40) major capsid protein Vp1 with the minor capsid proteins Vp2 and Vp3 is an integral aspect of the SV40 architecture. Two Vp3 sequence elements mediate Vp1 pentamer binding in vitro, Vp3 residues 155 to 190, or D1, and Vp3 residues 222 to 234, or D2. Of the two, D1 but not D2 was necessary and sufficient to direct the interaction with Vp1 in vivo. Rational mutagenesis of Vp3 residues (Phe157, Ile158, Pro164, Gly165, Gly166, Leu177, and Leu181) or Vp1 residues (Val243 and Leu245), based on a structural model of the SV40 Vp1 pentamer complexed with Vp3 D1, was carried out to disrupt the interaction between Vp1 and Vp3 and to study the consequences of these mutations for viral viability. Altering these residues to bulky, charged residues blocked the interaction in vitro. When these alterations were introduced into the viral genome, they reduced viral viability. Mutants with alterations in Vp1 Val243, Leu245, or both to glutamate were nearly nonviable, whereas those with Vp3 alterations reduced, but did not eliminate, viability. Our results defined the residues of Vp1 and the minor capsid proteins that are essential for both the interaction of the capsid proteins and viral viability in permissive cells.

Disassembly and reassembly of yeast‐derived recombinant human papillomavirus virus‐like particles (HPV VLPs)

The human papillomavirus (HPV) virus-like particles (VLPs) produced by recombinant expression systems are promising candidate vaccine antigens for prevention of cervical cancers as well as genital warts. However, expression of HPV type 6, 11, and 16 L1 proteins in Saccharomyces cerevisiae yielded irregularly shaped, broadly distributed VLPs smaller in size (30-50 nm) than expected (60 nm). In this study, we demonstrate that these HPV VLPs can be disassembled into the constituent capsomers (L1 pentamers) by incubation at low ionic strength and elevated pH in the presence of relatively low concentration of reducing agents. Following the removal of reducing agents, lowering of pH and increasing of ionic strength, the capsomers spontaneously reassembled into homogenous, 60-nm VLPs characterized by significantly enhanced structural stability and improved immunogenicity. In order to achieve quantitative recovery of HPV VLPs, the disassembly/reassembly process was further optimized by use of high ionic strength (>0.5 M sodium chloride) to prevent aggregation of VLPs. The reassembled VLPs possess an architectural structure very similar to that of the natural HPV virus particles. This development illustrates how the natural, in vivo mechanisms facilitating cell entry and virus replication can be utilized to achieve an optimal, in vitro assembly state of yeast-expressed HPV VLPs.

A granule cell neuron-associated JC virus variant has a unique deletion in the VP1 gene

The human polyomavirus JC (JCV) typically infects glial cells and is the aetiological agent of progressive multifocal leukoencephalopathy (PML), which occurs in immunosuppressed individuals. The full-length sequence of a granule cell neuron-tropic JCV variant, JCVGCN1, associated with lytic infection of granule cell neurons and cerebellar atrophy in a human immunodeficiency virus-infected patient with PML was determined and compared with the sequence of the JCV isolate from the classic PML lesions present in the hemispheric white matter of the same individual (JCVHWM). A unique deletion was found in the C terminus of the VP1 gene of JCVGCN1, which encodes the major capsid protein, resulting in a frame shift and a total change of the C-terminal amino acid sequence of this protein. This deletion was not present in JCVHWM, suggesting that this mutation may be instrumental in facilitating entry or replication of JCV into granule cell neurons.

Self-assembled pattern formation of block copolymers on the surface of the sphere using self-consistent field theory

The spherical surface is spatially discretized with triangular lattices to numerically calculate the Laplace-Beltrami operator contained in the self-consistent field theory (SCFT) equations using a finite volume method. Based on this method we have developed a spherical alternating-direction implicit (ADI) scheme for the first time to help extend real-space implementation of SCFT in 2D flat space to the surface of the sphere. By using this method, we simulate the equilibrium microphase separation morphology of block copolymers including AB diblocks, ABC linear triblocks and ABC star triblock copolymers occurred on the spherical surface. In general, two classes of microphase separation morphologies such as striped patterns for compositionally symmetric block copolymers and spotted patterns for asymmetric compositions have been found. In contrast to microphase separation morphology in 2D flat space, the geometrical characteristics of a sphere has a large influence on the self-assembled morphology. For striped patterns, several of spiral-form and ring-form patterns are found by changing the ratio of the radius of a sphere to the averaging width of the stripes. The specific pattern such as the striped and spotted pattern with intrinsic dislocations or defects stems from formed periodic patterns due to microphase separation of block copolymers arranged on the curved surface.

A structural rationale for SV40 Vp1 temperature-sensitive mutants and their complementation

Two groups of temperature-sensitive (ts) mutants, termed ts B and ts C, have mutations in the major capsid protein of SV40, Vp1. These mutants have virion assembly defects at the nonpermissive temperature, but can complement one another when two mutants, one from each group, coinfect a cell. A third group of mutants, termed ts BC, have related phenotypes, but do not complement other mutants. We found that the mutations fall into two structural and functional classes. All ts C and one ts BC mutations map to the region close to the Ca2+ binding sites, and are predicted to disrupt the insertion of the distal part of the C-terminal invading arm (C-arm) into the receiving clamp. They share a severe defect in assembly at the nonpermissive temperature, with few capsid proteins attached to the viral minichromosome. By contrast, all ts B and most ts BC mutations map to a contiguous region including acceptor sites for the proximal part of the C-arm and intrapentamer contacts. These mutants form assembly intermediates that carry substantial capsid proteins on the minichromosome. Thus, accurate virion assembly is prevented by mutations that disrupt interactions between the receiving pentamer and both the proximal and distal parts of the C-arms, with the latter having a greater effect. The distinct spatial localization and assembly defects of the two classes of mutants provide a rationale for their intracistronic complementation and suggest models of capsid assembly.

Update on BK virus entry and intracellular trafficking

BK virus (BKV) is a small, non-enveloped, double-stranded DNA virus and a member of the Polyomaviridae family. As the recently recognized etiologic agent of polyomavirus-associated nephropathy, the events involved in BKV invasion of host cells are an important area of study. Using cell culture models, the mechanism by which BKV infects permissive hosts to gain access to the replication machinery within these cells is beginning to unfold. BKV uses an N-linked glycoprotein containing an alpha(2,3)-linked sialic acid as a receptor. After this initial attachment, BKV enters cells through caveolae-mediated endocytosis. Intracellular trafficking via cellular cytoskeletal components follows this relatively slow and cholesterol-dependent internalization. BKV must reach the nucleus for viral transcription and replication to occur. Elucidating the steps of the early viral lifecycle would provide clues to help explain the infectious spread and pathology of this human pathogen.

Protein-protein interaction through beta-strand addition

Protein-protein interactions have essential roles at almost every level of organization and communication in living cells. During complex formation, proteins can interact via covalent, surface-surface or peptide-surface contacts. Many protein complexes are now known to involve the binding of linear motifs in one of the binding partners. An emerging mechanism of such non-covalent peptide-surface interaction involves the donation or addition of a beta strand in the ligand to a beta sheet or a beta strand in the receptor. Such 'beta-strand addition' contacts can dictate or modulate binding specificity and affinity, or can be used in more promiscuous protein-protein contacts. Three main classes of beta-strand addition can be distinguished: beta-sheet augmentation; beta-strand insertion and fold complementation; and beta-strand zippering. A survey of protein-protein complexes in the protein data bank identifies beta-strand additions in many important metabolic pathways. Targeting these interactions might, thus, provide novel routes for rational drug design.

Extent of protein-protein interactions and quasi-equivalence in viral capsids

Viral capsids are composed of multiple copies of one or a few gene products that self-assemble on their own or in the presence of the viral genome and/or auxiliary proteins into closed shells (capsids). We have analyzed 75 high-resolution virus capsid structures by calculating the average fraction of the solvent-accessible surface area of the coat protein subunits buried in the viral capsids. This fraction ranges from 0 to 1 and represents a normalized protein-protein interaction (PPI) index and is a measure of the extent of protein-protein interactions. The PPI indices were used to compare the extent of association of subunits among different capsids. We further examined the variation of the PPI indices as a function of the molecular weight of the coat protein subunit and the capsid diameter. Our results suggest that the PPI indices in T=1 and pseudo-T=3 capsids vary linearly with the molecular weight of the subunit and capsid size. This is in contrast to quasi-equivalent capsids with T>or=3, where the extent of protein-protein interactions is relatively independent of the subunit and capsid sizes. The striking outcome of this analysis is the distinctive clustering of the "T=2" capsids, which are distinguished by higher subunit molecular weights and a much lower degree of protein-protein interactions. Furthermore, the calculated residual (R(sym)) of the fraction buried surface areas of the structurally unique subunits in capsids with T>1 was used to calculate the quasi-equivalence of different subunit environments.

[Development of intranuclear inclusions of human polyomavirus JC. Capsid proteins are assembled into virions at the PML nuclear bodies]

Human polyomavirus JC (JCV) is a causative agent for progressive multifocal leukoencephalopathy, a fatal demyelinating disorder. The viruses form intranuclear viral inclusions in infected oligodendrocytes. The outer capsid of JCV is thought to be composed of 360 molecules of major capsid protein VP1, and minor capsid proteins VP2 and VP3 in an appropriate ratio. However, the regulatory mechanisms of gene expression for the capsid proteins, their nuclear transport, and formation of viral inclusions are not well understood. We have recently clarified the following regarding the mechanism underlying JCV virion assembly; (i) major and minor capsid proteins are synthesized from messenger RNAs, the expression ratio of which is determined by alternative splicing, (ii) messenger RNAs for the major and minor capsid proteins are polycistronic, and their translation occurs downstream of the regulatory protein, agnoprotein, (iii) major and minor capsid proteins are translocated to the nucleus in a cooperative manner and accumulate at the dot-shaped intranuclear structures called promyelocytic leukemia nuclear bodies (PML-NBs), (iv) efficient viral replication can occur at the PML-NBs, where capsid assembly is likely to be associated with viral DNA replication. PML-NBs are the sites for expression of important nuclear functions for the host cells. The finding that the target of JCV infection is the PML-NB may contribute greatly to our understanding of the mechanism underlying cellular degeneration, which occurs after the formation of intranuclear viral inclusions.

The VP2/VP3 Minor Capsid Protein of Simian Virus 40 Promotes the in Vitro Assembly of the Major Capsid Protein VP1 into Particles

The SV40 capsid is composed primarily of 72 pentamers of the VP1 major capsid protein. Although the capsid also contains the minor capsid protein VP2 and its amino-terminally truncated form VP3, their roles in capsid assembly remain unknown. An in vitro assembly system was used to investigate the role of VP2 in the assembly of recombinant VP1 pentamers. Under physiological salt and pH conditions, VP1 alone remained dissociated, and at pH 5.0, it assembled into tubular structures. A stoichiometric amount of VP2 allowed the assembly of VP1 pentamers into spherical particles in a pH range of 7.0 to 4.0. Electron microscopy observation, sucrose gradient sedimentation analysis, and antibody accessibility tests showed that VP2 is incorporated into VP1 particles. The functional domains of VP2 important for VP1 binding and for enhancing VP1 assembly were further explored with a series of VP2 deletion mutants. VP3 also enhanced VP1 assembly, and a region common to VP2 and VP3 (amino acids 119-272) was required to promote VP1 pentamer assembly. These results are relevant for controlling recombinant capsid formation in vitro, which is potentially useful for the in vitro development of SV40 virus vectors.

Size and position of truncations in the carboxy-terminal region of major capsid protein VP1 of hamster polyomavirus expressed in yeast determine its assembly capacity

The hamster polyomavirus major capsid protein VP1 was modified in its carboxy-terminal region by consecutive truncations and single amino acid exchanges. The ability of yeast-expressed VP1 variants to form virus-like particles (VLPs) strongly depended on the size and position of the truncation. VP1 variants lacking 21, 69, and 79 amino acid (aa) residues in their carboxy-terminal region efficiently formed VLPs similar to those formed by the unmodified VP1 (diameter 40-45 nm). In contrast, VP1 derivatives with carboxy-terminal truncations of 35 to 56 aa residues failed to form VLPs. VP1 mutants with a single A336G aa exchange or internal deletions of aa 335 to aa 346 and aa 335 to aa 363 resulted in the formation of VLPs of a smaller size (diameter 20 nm). These data indicate that certain parts of the carboxy-terminal region of VP1 are not essential for pentamer-pentamer interactions in the capsid, at least in the yeast expression system used.

Virus entry: open sesame

Detailed information about the replication cycle of viruses and their interactions with host organisms is required to develop strategies to stop them. Cell biology studies, live-cell imaging, and systems biology have started to illuminate the multiple and subtly different pathways that animal viruses use to enter host cells. These insights are revolutionizing our understanding of endocytosis and the movement of vesicles within cells. In addition, such insights reveal new targets for attacking viruses before they can usurp the host-cell machinery for replication.

ERp29 triggers a conformational change in polyomavirus to stimulate membrane binding

Membrane penetration of nonenveloped viruses is a poorly understood process. We have investigated early stages of this process by studying the conformational change experienced by polyomavirus (Py) in the lumen of the endoplasmic reticulum (ER), a step that precedes its transport into the cytosol. We show that a PDI-like protein, ERp29, exposes the C-terminal arm of Py's VP1 protein, leading to formation of a hydrophobic particle that binds to a lipid bilayer; this reaction likely mimics initiation of Py penetration across the ER membrane. Expression of a dominant-negative ERp29 decreases Py infection, indicating ERp29 facilitates viral infection. Interestingly, cholera toxin, another toxic agent that crosses the ER membrane into the cytosol, is unfolded by PDI in the ER. Our data thus identify an ER factor that mediates membrane penetration of a nonenveloped virus and suggest that PDI family members are generally involved in ER remodeling reactions.

Visualization of discrete L1 oligomers in human papillomavirus 16 virus-like particles by gel electrophoresis with Coomassie staining

The recombinant major capsid protein (L1) of human papillomavirus (HPV) can self-assemble into virus-like particles (VLPs) with 360 L1 molecules per VLP. These tightly associated L1 oligomers in the assembled VLPs were disrupted in a pH-, denaturant-, time-, and temperature-dependent fashion. With non-reducing Laemmli-type SDS-PAGE, primarily the monomeric L1 protein ( approximately 55 kDa) is observed when analyzing VLP preparations. When the pH was lowered to pH 7.0 in NuPAGE system and the gel temperature during electrophoresis was maintained at a lower temperature ( approximately 7 degrees C), a ladder of protein bands in approximately 55 kDa increments were detected above the monomeric p55 band. These discrete bands visualized as a ladder are likely the disulfide-linked L1 oligomers. In addition to the gel running conditions, an increase in pH, temperature, or SDS concentration during sample treatment was also shown to significantly reduce the amount of detectable oligomers, further corroborating the labile nature of these oligomers. Altogether, the results also implicate the redox-responsive nature of the HPV capsid comprising of >95% L1 protein. Molecular basis of the facile disulfide bond inter-change is discussed. This electrophoretic technique for trapping the disulfide-linked oligomers may be employed to detect the oligomeric status of other protein aggregates or assembled particles.

Protein structures forming the shell of primitive bacterial organelles

Bacterial microcompartments are primitive organelles composed entirely of protein subunits. Genomic sequence databases reveal the widespread occurrence of microcompartments across diverse microbes. The prototypical bacterial microcompartment is the carboxysome, a protein shell for sequestering carbon fixation reactions. We report three-dimensional crystal structures of multiple carboxysome shell proteins, revealing a hexameric unit as the basic microcompartment building block and showing how these hexamers assemble to form flat facets of the polyhedral shell. The structures suggest how molecular transport across the shell may be controlled and how structural variations might govern the assembly and architecture of these subcellular compartments.

Structure and assembly of a T=1 virus-like particle in BK polyomavirus

In polyomaviruses the pentameric capsomers are interlinked by the long C-terminal arm of the structural protein VP1. The T=7 icosahedral structure of these viruses is possible due to an intriguing adaptability of this linker arm to the different local environments in the capsid. To explore the assembly process, we have compared the structure of two virus-like particles (VLPs) formed, as we found, in a calcium-dependent manner by the VP1 protein of human polyomavirus BK. The structures were determined using electron cryomicroscopy (cryo-EM), and the three-dimensional reconstructions were interpreted by atomic modeling. In the small VP1 particle, 26.4 nm in diameter, the pentameric capsomers form an icosahedral T=1 surface lattice with meeting densities at the threefold axes that interlinked three capsomers. In the larger particle, 50.6 nm in diameter, the capsomers form a T=7 icosahedral shell with three unique contacts. A folding model of the BKV VP1 protein was obtained by alignment with the VP1 protein of simian virus 40 (SV40). The model fitted well into the cryo-EM density of the T=7 particle. However, residues 297 to 362 of the C-terminal arm had to be remodeled to accommodate the higher curvature of the T=1 particle. The loops, before and after the C-terminal short helix, were shown to provide the hinges that allowed curvature variation in the particle shell. The meeting densities seen at the threefold axes in the T=1 particle were consistent with the triple-helix interlinking contact at the local threefold axes in the T=7 structure.

Characterization of simian virus 40 on its infectious entry pathway in cells using fluorescence correlation spectroscopy

SV40 (simian virus 40) is a double-stranded DNA virus and is strongly oncogenic in experimental animals. SV40 enters cells by atypical endocytosis mediated by caveolae, transporting the virus to its usual destination, namely the endoplasmic reticulum. The cellular mechanisms of capsid disassembly (uncoating) and deliverance of the viral genome into the cellular nucleus remain unknown. Here, we study (i) the formation of caveolae after viral infection and the diffusion of caveosome vesicles in the cytoplasm and (ii) the capsid disassembly and the mobility of the viral genome on its way to the nucleus, using fluorescence correlation spectroscopy. To follow the viral genome and capsids separately, the histone components of SV40 minichromosomes were labelled with enhanced yellow fluorescent protein and the capsid was labelled with a fluorescent red dye, Alexa568. We characterized the diffusion of caveosomes, the capsid disassembly process in the cytoplasm and the mobility of the viral genome in the nucleus, using two kinds of permissive cells.

Pairs of Vp1 cysteine residues essential for simian virus 40 infection

Transient disulfide bonding occurs during the intracellular folding and pentamerization of simian virus 40 (SV40) major capsid protein Vp1 (P. P. Li, A. Nakanishi, S. W. Clark, and H. Kasamatsu, Proc. Natl. Acad. Sci. USA 99:1353-1358, 2002). We investigated the requirement for Vp1 cysteine pairs during SV40 infection. Our analysis identified three Vp1 double-cysteine mutant combinations that abolished viability as assayed by plaque formation. Mutating the Cys49-Cys87 pair or the Cys87-Cys254 pair led to ineffective nuclear localization and diminished accumulation of the mutant Vp1s, and the defect extended in a dominant-negative manner to the wild-type minor capsid proteins Vp2/3 and an affinity-tagged recombinant Vp1 expressed in the same cells. Mutating the Cys87-Cys207 pair preserved the nuclear localization and normal accumulation of the capsid proteins but diminished the production of virus-like particles. Our results are consistent with a role for Cys49, Cys87, and Cys254 in the folding and cytoplasmic-nuclear trafficking of Vp1 and with a role for Cys87 and Cys207 in the assembly of infectious particles. These findings suggest that transient disulfide bond formation between certain Vp1 cysteine residues functions at two stages of SV40 infection: during Vp1 folding and oligomerization in the cytoplasm and during virion assembly in the nucleus.

Diversity and Identity of Mechanical Properties of Icosahedral Viral Capsids Studied with Elastic Network Normal Mode Analysis

We analyze the mechanical properties and putative dynamical fluctuations of a variety of viral capsids comprising different sizes and quasi-equivalent symmetries by performing normal mode analysis using the elastic network model. The expansion of the capsid to a swollen state is studied using normal modes and is compared with the experimentally observed conformational change for three of the viruses for which experimental data exist. We show that a combination of one or two normal modes captures remarkably well the overall translation that dominates the motion between the two conformational states, and reproduces the overall conformational change. We observe for all of the viral capsids that the nature of the modes is different. In particular for the T=7 virus, HK97, for which the shape of the capsid changes from spherical to faceted polyhedra, two modes are necessary to accomplish the conformational transition. In addition, we extend our study to viral capsids with other T numbers, and discuss the similarities and differences in the features of virus capsid conformational dynamics. We note that the pentamers generally have higher flexibility and propensity to move freely from the other capsomers, which facilitates the shape adaptation that may be important in the viral life cycle.

Cys254 and Cys49/Cys87of simian virus 40 Vp1 are essential in formation of infectious virions

The SV40 capsid is composed of pentameric capsomeres of Vp1. We have previously shown that disulfide linkages at Vp1 Cys9, Cys104, and Cys207 are essential in formation of infectious virions. Here, the role of the remaining four cysteines was explored. Single, double, and quadruple cys --> ser mutant genomes at Vp1 Cys49, Cys87, Cys254, and Cys267 codons were generated and transfected into CV-1 cells. The quadruple mutant Vp1 continued to localize to the nucleus and to bind DNA, but resulted in no plaques. SV40Vp1.Cys254 was the only single mutant with complete defect in plaque formation. The double mutant at Vp1.Cys49.Cys87 showed complete defect in plaque formation, while single mutants at the two residues resulted in plaques, suggesting a cumulative effect. All mutants defective in plaque formation continued to localize viral proteins in the nucleus. Taken together, our results suggest that Cys254 and the Cys49/Cys87 combination are essential in late stages of infectious virion formation.

Major and minor capsid proteins of human polyomavirus JC cooperatively accumulate to nuclear domain 10 for assembly into virions

The human polyomavirus JC (JCV) replicates in the nuclei of infected cells. Here we report that JCV virions are efficiently assembled at nuclear domain 10 (ND10), which is also known as promyelocytic leukemia (PML) nuclear bodies. The major capsid protein VP1, the minor capsid proteins VP2 and VP3, and a regulatory protein called agnoprotein were coexpressed from a polycistronic expression vector in COS-7 cells. We found that VP1 accumulated to distinct subnuclear domains in the presence of VP2/VP3 and agnoprotein, while VP1 expressed alone was distributed both in the cytoplasm and in the nucleus. Mutation analysis revealed that discrete intranuclear accumulation of VP1 requires the presence of either VP2 or VP3. However, VP2 or VP3 expressed in the absence of VP1 showed diffuse, not discrete, nuclear localization. The C-terminal sequence of VP2/VP3 contains two basic regions, GPNKKKRRK (cluster 1) and KRRSRSSRS (cluster 2). The deletion of cluster 2 abolished the accumulation of VP1 to distinct subnuclear domains. Deletion of the C-terminal 34 residues of VP2/VP3, including both cluster 1 and cluster 2, caused VP1 to localize both in the cytoplasm and in the nucleus. Using immunoelectron microscopy of cells that coexpressed VP1, VP2/VP3, and agnoprotein, we detected the assembly of virus-like particles in discrete locations along the inner nuclear periphery. Both in oligodendrocytes of the human brain and in transfected cells, discrete nuclear domains for VP1 accumulation were identified as ND10, which contains the PML protein. These results indicate that major and minor capsid proteins cooperatively accumulate in ND10, where they are efficiently assembled into virions.

Preformed structural elements feature in partner recognition by intrinsically unstructured proteins

Intrinsically unstructured proteins (IUPs) are devoid of extensive structural order but often display signs of local and limited residual structure. To explain their effective functioning, we reasoned that such residual structure can be crucial in their interactions with their structured partner(s) in a way that preformed structural elements presage their final conformational state. To check this assumption, a database of 24 IUPs with known 3D structures in the bound state has been assembled and the distribution of secondary structure elements and backbone torsion angles have been analysed. The high proportion of residues in coil conformation and with phi, psi angles in the disallowed regions of the Ramachandran map compared to the reference set of globular proteins shows that IUPs are not fully ordered even in their bound form. To probe the effect of partner proteins on IUP folding, inherent conformational preferences of IUP sequences have been assessed by secondary structure predictions using the GOR, ALB and PROF algorithms. The accuracy of predicting secondary structure elements of IUPs is similar to that of their partner proteins and is significantly higher than the corresponding values for random sequences. We propose that strong conformational preferences mark regions in IUPs (mostly helices), which correspond to their final structural state, while regions with weak conformational preferences represent flexible linkers between them. In our interpretation, preformed elements could serve as initial contact points, the binding of which facilitates the reeling of the flexible regions onto the template. This finding implies that IUPs draw a functional advantage from preformed structural elements, as they enable their facile, kinetically and energetically less demanding, interaction with their physiological partner.

Efficient Intracellular Delivery of a Protein and a Low Molecular Weight Substance via Recombinant Polyomavirus-like Particles

Efficient encapsulation of foreign molecules like proteins and low molecular weight drugs into polyoma virus-like particles (capsoids) was achieved by the development of an anchoring technique based upon the specific interaction of the inner core protein VP2 with VP1 pentamers. A stretch of 49 amino acids of VP2 served as an anchor molecule, either expressed as a fusion protein with green fluorescent protein (GFP) or covalently linked to methotrexate (MTX). The loaded capsoids showed regular morphology and stability for several months. GFP and MTX were internalized into cells in vitro, as was demonstrated by the detection of GFP and VP1 fluorescence in mouse fibroblasts and the cytostatic effect of intracellularly released MTX on leukemia T cells.