The structure of simian virus 40 refined at 3.1 A resolution

Further evidence that papillomavirus capsids exist in two distinct conformations

Cell surface heparan sulfate proteoglycans (HSPGs) serve as primary attachment receptors for human papillomaviruses (HPVs). To demonstrate that a biologically functional HPV-receptor interaction is restricted to a specific subset of HSPGs, we first explored the role of HSPG glucosaminoglycan side chain modifications. We demonstrate that HSPG O sulfation is essential for HPV binding and infection, whereas de-N-sulfated heparin interfered with VLP binding but not with HPV pseudoinfection. This points to differences in VLP-HSPG and pseudovirion-HSPG interactions. Interestingly, internalization kinetics of VLPs and pseudovirions, as measured by fluorescence-activated cell sorting analysis, also differ significantly with approximate half times of 3.5 and 7.5 h, respectively. These data suggest that differences in HSPG binding significantly influence postbinding events. We also present evidence that pseudovirions undergo a conformational change after cell attachment. A monoclonal antibody (H33.J3), which displays negligible effectiveness in preattachment neutralization assays, efficiently neutralizes cell-bound virions. However, no difference in H33.J3 binding to pseudovirions and VLPs was observed in enzyme-linked immunosorbent assay and virus capture assays. In contrast to antibody H33.B6, which displays equal efficiencies in pre- and postattachment neutralization assays, H33.J3 does not block VLP binding to heparin, demonstrating that it interferes with steps subsequent to virus binding. Our data strongly suggest that H33.J3 recognizes a conformation-dependent epitope in capsid protein L1, which undergoes a structural change after cell attachment.

The simian virus 40 minor structural protein Vp3, but not Vp2, is essential for infectious virion formation

The SV40 capsid is composed of pentameric capsomeres of the major structural protein Vp1. The two minor structural proteins, Vp2 and Vp3, interact with the capsid. Here, the roles of Vp2 and Vp3 were explored during the course of SV40 infection. Start codons of Vp2, Vp3, or both Vp2 and Vp3, were destroyed by site-directed mutagenesis, and mutant genomes were transfected into CV-1 cells. SV40DeltaVp2 produced plaques and infectious virion particles with titres indistinguishable from wild-type. SV40DeltaVp3 and SV40 DeltaVp2/Vp3 were defective in plaque formation and rendered no infectious particles. All three mutants showed normal nuclear localization of T-Ag and Vp1; they also showed packaging of SV40 DNA by nuclease digestion assays. Thus, Vp3 is essential for formation of infectious SV40 particles, whereas Vp2 is not. One critical role of full-length Vp3 appears to be in virus-cell interactions at post-packaging steps of a permissive infection.

Simian virus 40 VP1 capsid protein forms polymorphic assemblies in vitro

The simian virus 40 (SV40) capsid is composed of 72 pentamers of VP1, the major protein of SV40. These pentamers are arranged in a T=7d icosahedral surface lattice, which is maintained by three types of appropriately arranged, non-equivalent interactions between the pentamers. However, it remains unclear how these interactions are achieved. In this study, the in vitro assembly of recombinant VP1 was analysed. Electron microscopy observations revealed that these recombinant VP1 proteins assembled into structurally polymorphic particles depending on environmental conditions. VP1 pentamers assembled efficiently into virus-like particles (VLPs) when high concentrations of ammonium sulfate were present. However, in the presence of 1 M NaCl and 2 mM CaCl(2) at neutral pH, VP1 pentamers formed not only VLPs but also produced tiny T=1 icosahedral particles and tubular structures. The exclusion of CaCl(2) resulted in the exclusive formation of tiny particles. In contrast, in the presence of 150 mM NaCl at pH 5, the VP1 pentamers produced only extraordinarily long tubular structures. VP1 is thus quite unique in that it can assemble into such diverse structures. These observations provide clues that will help elucidate the mechanisms underlying SV40 capsid formation.

Importance of Vp1 calcium-binding residues in assembly, cell entry, and nuclear entry of simian virus 40

For polyomaviruses, calcium ions are known to be essential for virion integrity and for the assembly of capsid structures. To define the role of calcium ions in the life cycle of the virus, we analyzed simian virus 40 (SV40) mutants in which structurally deduced calcium-binding amino acids of Vp1 were mutated singly and in combination. Our study provides evidence that calcium ions mediate not only virion assembly but also the initial infection processes of cell entry and nuclear entry. Mutations at Glu48, Glu157, Glu160, Glu216, and/or Glu330 are correlated with different extents of packaging defects. The low packaging ability of mutant E216R suggests the need to position the Glu216 side chain for proper virion formation. All other mutants selected for further analysis produced virus-like particles (VLPs) but were poorly infectious. The VLPs of mutant E330K could not attach to or enter the cell, and mutant E157A-E160A and E216K VLPs entered the cell but failed to enter the nucleus, apparently as a result of premature VLP dissociation. Our results show that five of the seven acidic side chains at the two calcium-binding sites-Glu48 and Glu330 (site 1), Glu157 and Glu160 (site 2), and Glu216 (both sites)-are important for SV40 infection. We propose that calcium coordination imparts not only stability but also structural flexibility to the virion, allowing the acquisition or loss of the ion at the two sites to control virion formation in the nucleus, as well as virion structural alterations at the cell surface and in the cytoplasm early during infection.

Characterization of self-assembled virus-like particles of human polyomavirus BK generated by recombinant baculoviruses

The major structural protein of the human polyomavirus BK (BKV), VP1, was expressed by using recombinant baculoviruses. A large amount of protein with a molecular mass of about 42 kDa was synthesized and identified by Western blotting. The protein was detected exclusively in the nuclei by immunofluorescent analysis and it was released into culture medium. The expressed BKV VP1 protein was self-assembled into virus-like particles (BK-VLPs) with two different sizes (50 and 26 nm in diameter), which migrated into four different bands in CsCl gradient with buoyant densities of 1.29, 1.30, 1.33, and 1.35 g/cm(3). The immunological studies on the BK-VLPs suggested that they have similar antigenicity with those of authentic BKV particles. Cryoelectron microscopy and 3D image analysis further revealed that the larger BK-VLPs were composed of 72 capsomers which all were pentamers arranged in a T = 7 surface lattice. This system provides useful information for detailed studies of viral morphogenesis and the structural basis for the antigenicity of BKV.

The abundant nuclear enzyme PARP participates in the life cycle of simian virus 40 and is stimulated by minor capsid protein VP3

The abundant nuclear enzyme poly(ADP-ribose) polymerase (PARP) functions in DNA damage surveillance and repair and at the decision between apoptosis and necrosis. Here we show that PARP binds to simian virus 40 (SV40) capsid proteins VP1 and VP3. Furthermore, its enzymatic activity is stimulated by VP3 but not by VP1. Experiments with purified mutant proteins demonstrated that the PARP binding domain in VP3 is localized to the 35 carboxy-terminal amino acids, while a larger peptide of 49 amino acids was required for full stimulation of its activity. The addition of 3-aminobenzamide (3-AB), a known competitive inhibitor of PARP, demonstrated that PARP participates in the SV40 life cycle. The titer of SV40 propagated on CV-1 cells was reduced by 3-AB in a dose-dependent manner. Additional experiments showed that 3-AB did not affect viral DNA replication or capsid protein production. PARP did not modify the viral capsid proteins in in vitro poly(ADP-ribosylation) assays, implying that it does not affect SV40 infectivity. On the other hand, it greatly reduced the magnitude of the host cytopathic effects, a hallmark of SV40 infection. Additional experiments suggested that the stimulation of PARP activity by VP3 leads the infected cell to a necrotic pathway, characterized by the loss of membrane integrity, thus facilitating the release of mature SV40 virions from the cells. Our studies identified a novel function of the minor capsid protein VP3 in the recruitment of PARP for the SV40 lytic process.

Structure of the herpesvirus major capsid protein

Herpes simplex virus-1 (HSV-1) virions are large, complex enveloped particles containing a proteinaceous tegument layer connected to an icosahedral capsid. The major capsid protein, VP5 (149 kDa), makes up both types of capsomere, pentons and hexons. Limited trypsin digestion of VP5 identified a single stable 65 kDa fragment which represents a proposed protein folding nucleus. We report the 2.9 A crystal structure of this fragment and its modeling into an 8.5 A resolution electron cryomicroscopy map of the HSV-1 capsid. The structure, the first for any capsid protein from Herpesviridae, revealed a novel fold, placing herpesviruses outside any of the structurally linked viral groupings. Alterations in the geometrical arrangements of the VP5 subunits in the capsomeres exposes different residues, resulting in the differential association of the tegument and VP26 with the pentons and hexons, respectively. The rearrangements of VP5 subunits required to form both pentavalent and hexavalent capsomeres result in structures that exhibit very different electrostatic properties. These differences may mediate the binding and release of other structural proteins during capsid maturation.

Chimeric bacteriophage fr virus-like particles harboring the immunodominant C-terminal region of hamster polyomavirus VP1 induce a strong VP1-specific antibody response in rabbits and mice

The late region of the hamster polyomavirus (HaPyV, former HaPV) genome encodes three structural proteins VP1, VP2, and VP3, where VP1 represents the major capsid protein of 384 amino acids. Screening of sera from HaPyV-infected papilloma-bearing and papilloma-free hamsters demonstrated the immunodominant features of all three capsid proteins. For both groups of hamsters in the C-terminal region of VP1 immunodominant B-cell epitopes were identified in the regions between amino acids 305 and 351 and amino acids 351 and 384. The high flexibility of the C-terminal region of VP1 was confirmed by the formation of chimeric virus-like particles based on the coat protein of the RNA bacteriophage fr which was previously found to tolerate only very short-sized foreign insertions. Phage fr coat protein-derived virus-like particles tolerated the N-terminal fusion of amino acids 333-384, 351-384, 351-374, and 364-384, respectively, of VP1. The induction of VP1-specific antibodies in rabbits and mice by immunization with chimeric virus-like particles harboring amino acids 333-384, 351-384, and 364-384, respectively, of VP1 suggested the immunodominant nature of the C-terminal region of VP1.

High cloning capacity of in vitro packaged SV40 vectors with no SV40 virus sequences

In vitro packaging of plasmid DNA using recombinant SV40 capsid proteins is a potentially useful procedure that overcomes some restrictions of the other SV40 systems such as the requirement for SV40 sequences and the limitation in size of DNA that can be packaged. The in vitro packaging system uses the four SV40 proteins (VP1, VP2, VP3, and agno) or VP1 only. The ability to confer drug resistance by three ABC transporter genes (MDR 1, MRP 1, or MXR) was determined using the surrogate fluorescent substrates rhodamine-123 or calcein AM and their specific inhibitors, or by using specific antibodies to the transporters to detect cell surface expression by fluorescence-activated cell sorter analysis (FACS). A green fluorescent protein plasmid (EGFP-C1) was also used to monitor gene transfer. The packaged plasmids ranged in size from 4.2 to 17.6 kb, and only slightly affected particle size as determined by electron microscopy. When 9.5 kb and larger plasmids were packaged using all SV40 proteins, MDR1 expression was decreased compared to VP1 alone. The size of the 15.2 kb DNA after packaging was the same as the original DNA. Packaging with SV40 capsid proteins in vitro does not require any SV40 sequences. Using either the MDR1 or the GFP gene we could demonstrate enhanced expression when cells were pretreated with phorbol 12-myristate 13-acetate (PMA) at low concentrations. Interferon-gamma did not alter expression. We conclude that in vitro packaging is more flexible then previously realized, permitting packaging of at least 17 kb plasmid DNA without the requirement for any viral sequences. This system combines efficient gene delivery of the SV40 viral vector with the presumed safety of nonviral vectors.

A general method to quantify quasi-equivalence in icosahedral viruses

A quantitative, atom-based, method is described for comparing protein subunit interfaces in icosahedral virus capsids with quasi-equivalent surface lattices. An integrated, normalized value (between 0 and 1) based on equivalent residue contacts (Q-score) is computed for every pair of subunit interactions and scores that are significantly above zero readily identify interfaces that are quasi-equivalent to each other. The method was applied to all quasi-equivalent capsid structures (T=3, 4, 7 and 13) in the Protein Data Bank and the Q-scores were interpreted in terms of their structural underpinnings. The analysis allowed classification of T=3 structures into three groups with architectures that resemble different polyhedra with icosahedral symmetry. The preference of subunits to form dimers in the T=4 human Hepatitis B virus capsid (HBV) was clearly reflected in high Q-scores of quasi-equivalent dimers. Interesting differences between the classical T=7 capsid and polyoma-like capsids were also identified. Application of the method to the outer-shell of the T=13 Blue tongue virus core (BTVC) highlighted the modest distortion between the interfaces of the general trimers and the strict trimers of VP7 subunits. Furthermore, the method identified the quasi 2-fold symmetry in the inner capsids of the BTV and reovirus cores. The results show that the Q-scores of various quasi-symmetries represent a "fingerprint" for a particular virus capsid architecture allowing particle classification into groups based on their underlying structural and geometric features.

Atomic model of the papillomavirus capsid

Papillomaviruses propagate in differentiating skin cells, and certain types are responsible for the onset of cervical cancer. We have combined image reconstructions from electron cryomicroscopy (cryoEM) of bovine papillomavirus at 9 A resolution with coordinates from the crystal structure of small virus-like particles of the human papillomavirus type 16 L1 protein to generate an atomic model of the virion. The overall fit of the L1 model into the cryoEM map is excellent, but residues 402-446 in the 'C-terminal arm' must be rebuilt. We propose a detailed model for the structure of this arm, based on two constraints: the presence of an intermolecular disulfide bond linking residues 175 and 428, and the clear identification of a feature in the image reconstruction corresponding to an alpha-helix near the C-terminus of L1. We have confirmed the presence of the disulfide bond by mass spectrometry. Our 'invading arm' model shows that papilloma- and polyomaviruses have a conserved capsid architecture. Most of the rebuilt C-terminal arm is exposed on the viral surface; it is likely to have a role in infection and in immunogenicity.

Cellular transcription factor Sp1 recruits simian virus 40 capsid proteins to the viral packaging signal, ses

Simian virus 40 (SV40) capsid assembly occurs in the nucleus. All three capsid proteins bind DNA nonspecifically, raising the dilemma of how they attain specificity to the SV40 minichromosome in the presence of a large excess of genomic DNA. The SV40 packaging signal, ses, which is required for assembly, is composed of multiple DNA elements that bind transcription factor Sp1. Our previous studies showed that Sp1 participates in SV40 assembly and that it cooperates in DNA binding with VP2/3. We hypothesized that Sp1 recruits the capsid proteins to the viral minichromosome, conferring upon them specific DNA recognition. Here, we have tested the hypothesis. Computer analysis showed that the combination of six tandem GC boxes at ses is not found at cellular promoters and therefore is unique to SV40. Cooperativity in DNA binding between Sp1 and VP2/3 was not abolished at even a 1,000-fold excess of cellular DNA, providing strong support for the recruitment hypothesis. Sp1 also binds VP1 and cooperates with VP1 in DNA binding. VP1 pentamers (VP1(5)) avidly interact with VP2/3, utilizing the same VP2/3 domain as described for polyomavirus. We conclude that VP1(5)-VP2/3 building blocks are recruited by Sp1 to ses, where they form the nucleation center for capsid assembly. By this mechanism the virus ensures that capsid formation is initiated at a single site around its minichromosome. Sp1 enhances the formation of SV40 pseudovirions in vitro, providing additional support for the model. Analyses of Sp1 and VP3 deletion mutants showed that Sp1 and VP2/3 bind one another and cooperate in DNA binding through their DNA-binding domains, with additional contacts outside these domains. VP1 contacts Sp1 at residues outside the Sp1 DNA-binding domain. These and additional data allowed us to propose a molecular model for the VP1(5)-VP2/3-DNA-Sp1 complex.

3D domain swapping: as domains continue to swap

Three-dimensional (3D) domain swapping creates a bond between two or more protein molecules as they exchange their identical domains. Since the term '3D domain swapping' was first used to describe the dimeric structure of diphtheria toxin, the database of domain-swapped proteins has greatly expanded. Analyses of the now about 40 structurally characterized cases of domain-swapped proteins reveal that most swapped domains are at either the N or C terminus and that the swapped domains are diverse in their primary and secondary structures. In addition to tabulating domain-swapped proteins, we describe in detail several examples of 3D domain swapping which show the swapping of more than one domain in a protein, the structural evidence for 3D domain swapping in amyloid proteins, and the flexibility of hinge loops. We also discuss the physiological relevance of 3D domain swapping and a possible mechanism for 3D domain swapping. The present state of knowledge leads us to suggest that 3D domain swapping can occur under appropriate conditions in any protein with an unconstrained terminus. As domains continue to swap, this review attempts not only a summary of the known domain-swapped proteins, but also a framework for understanding future findings of 3D domain swapping.

Endocytosis via caveolae

Caveolae are flask-shaped invaginations present in the plasma membrane of many cell types. They have long been implicated in endocytosis, transcytosis, and cell signaling. Recent work has confirmed that caveolae are directly involved in the internalization of membrane components (glycosphingolipids and glycosylphosphatidylinositol-anchored proteins), extracellular ligands (folic acid, albumin, autocrine motility factor), bacterial toxins (cholera toxin, tetanus toxin), and several nonenveloped viruses (Simian virus 40, Polyoma virus). Unlike clathrin-mediated endocytosis, internalization through caveolae is a triggered event that involves complex signaling. The mechanism of internalization and the subsequent intracellular pathways that the internalized substances take are starting to emerge.

BK virus regulatory region rearrangements in brain and cerebrospinal fluid from a leukemia patient with tubulointerstitial nephritis and meningoencephalitis

BK virus (BKV) was recovered by polymerase chain reaction (PCR) from brain, kidney, lung, urine, and cerebrospinal fluid (CSF) of a fatal case of BKV tubulointerstitial nephritis with dissemination to lung and brain. Viral regulatory regions in PCR-amplified urine and the lung samples were identical to the archetypal structure, WWT. In the brain and CSF, a rearranged sequence predominated, however. A 94-bp deletion preceded a 71-bp tandem duplication because the same 94-bp segment was deleted from both copies. PCR-amplified regulatory region products were cloned and sequenced to define further the extent of the rearranged structures. Two kidney clones were archetypal, whereas two others were rearranged differently from the brain and from each other. In contrast to the brain clones, the kidney rearrangements seemed to involve deletion after duplication. Three of four brain clones sequenced were identical to the rearrangement found to dominate in the PCR product. A fourth clone showed two short deletions without any duplication. The four CSF clones all showed rearrangements identical to that which was amplified by PCR from CSF and brain. This represents the first molecular analysis of a BKV strain obtained from a central nervous system infection, and it reveals regulatory region rearrangements reminiscent of those described in JC virus from brains with progressive multifocal leukoencephalopathy. We suggest that the presence in the CSF of BKV with a dominant rearranged regulatory region may be useful in the diagnosis of BKV meningoencephalitis secondary to BKV nephritis.

Formation of transitory intrachain and interchain disulfide bonds accompanies the folding and oligomerization of simian virus 40 Vp1 in the cytoplasm

Pentamer formation by Vp1, the major capsid protein of simian virus 40, requires an interdigitation of structural elements from the Vp1 monomers [Liddington, R. C., Yan, Y., Moulai, J., Sahli, R., Benjamin, T. L. & Harrison, S. C. (1991) Nature (London) 354, 278-284]. Our analyses reveal that disulfide-linked Vp1 homooligomers are present in the simian virus 40-infected cytoplasm and that they are derived from a 41-kDa monomeric intermediate containing an intrachain disulfide bond(s). The 41-kDa species, emerging within 5 min of pulse labeling with [(35)S]methionine, is converted into a 45-kDa, disulfide-free Vp1 monomer and disulfide-bonded dimers through pentamers. The covalent oligomer formation is blocked in the presence of a sulfhydryl-modifying reagent. We propose that there are two stages in this Vp1 disulfide bonding. First, the newly synthesized Vp1 monomers acquire intrachain bonds as they fold and begin to interact. Next, these bonds are replaced with intermolecular bonds as the monomers assemble into pentamers. This sequential appearance of transitory disulfide bonds is consistent with a role for sulfhydryl-disulfide redox reactions in the coordinate folding of Vp1 chains into pentamers. The cytoplasmic Vp1 does not colocalize with marker proteins of the endoplasmic reticulum. This paper demonstrates in vivo disulfide formations and exchanges coupled to the folding and oligomerization of a mammalian protein in the cytoplasm, outside the secretory pathway. Such disulfide dynamics may be a general phenomenon for other cysteine-bearing mammalian proteins that fold in the cytoplasm.

Caveolae are involved in the trafficking of mouse polyomavirus virions and artificial VP1 pseudocapsids toward cell nuclei

Electron and confocal microscopy were used to observe the entry and the movement of polyomavirus virions and artificial virus-like particles (VP1 pseudocapsids) in mouse fibroblasts and epithelial cells. No visible differences in adsorption and internalization of virions and VP1 pseudocapsids ("empty" or containing DNA) were observed. Viral particles entered cells internalized in smooth monopinocytic vesicles, often in the proximity of larger, caveola-like invaginations. Both "empty" vesicles derived from caveolae and vesicles containing viral particles were stained with the anti-caveolin-1 antibody, and the two types of vesicles often fused in the cytoplasm. Colocalization of VP1 with caveolin-1 was observed during viral particle movement from the plasma membrane throughout the cytoplasm to the perinuclear area. Empty vesicles and vesicles with viral particles moved predominantly along microfilaments. Particle movement was accompanied by transient disorganization of actin stress fibers. Microfilaments decorated by the VP1 immunofluorescent signal could be seen as concentric curves, apparently along membrane structures that probably represent endoplasmic reticulum. Colocalization of VP1 with tubulin was mostly observed in areas close to the cell nuclei and on mitotic tubulin structures. By 3 h postinfection, a strong signal of the VP1 (but no viral particles) had accumulated in the proximity of nuclei, around the outer nuclear membrane. However, the vast majority of VP1 pseudocapsids did not enter the nuclei.

Combined EM/X-ray imaging yields a quasi-atomic model of the adenovirus-related bacteriophage PRD1 and shows key capsid and membrane interactions

BACKGROUND

The dsDNA bacteriophage PRD1 has a membrane inside its icosahedral capsid. While its large size (66 MDa) hinders the study of the complete virion at atomic resolution, a 1.65-A crystallographic structure of its major coat protein, P3, is available. Cryo-electron microscopy (cryo-EM) and three-dimensional reconstruction have shown the capsid at 20-28 A resolution. Striking architectural similarities between PRD1 and the mammalian adenovirus indicate a common ancestor.

RESULTS

The P3 atomic structure has been fitted into improved cryo-EM reconstructions for three types of PRD1 particles: the wild-type virion, a packaging mutant without DNA, and a P3-shell lacking the membrane and the vertices. Establishing the absolute EM scale was crucial for an accurate match. The resulting "quasi-atomic" models of the capsid define the residues involved in the major P3 interactions, within the quasi-equivalent interfaces and with the membrane, and show how these are altered upon DNA packaging.

CONCLUSIONS

The new cryo-EM reconstructions reveal the structure of the PRD1 vertex and the concentric packing of DNA. The capsid is essentially unchanged upon DNA packaging, with alterations limited to those P3 residues involved in membrane contacts. These are restricted to a few of the N termini along the icosahedral edges in the empty particle; DNA packaging leads to a 4-fold increase in the number of contacts, including almost all copies of the N terminus and the loop between the two beta barrels. Analysis of the P3 residues in each quasi-equivalent interface suggests two sites for minor proteins in the capsid edges, analogous to those in adenovirus.

Simian virus 40 Vp1 DNA-binding domain is functionally separable from the overlapping nuclear localization signal and is required for effective virion formation and full viability

A DNA-binding domain (DBD) was identified on simian virus 40 (SV40) major capsid protein Vp1, and the domain's function in the SV40 life cycle was examined. The DBD was mapped by assaying various recombinant Vp1 proteins for DNA binding in vitro. The carboxy-terminal 58-residue truncated Vp1DeltaC58 pentamer bound DNA with a K(d) of 1.8 x 10(-9) M in terms of the protein pentamer, while full-length Vp1 and carboxy-terminal-17-truncated Vp1DeltaC17 had comparable apparent K(d)s of 5.3 x 10(-9) to 7.3 x 10(-9) M in terms of the protein monomers. Previously identified on Vp1 was a nuclear localization signal (NLS) consisting of two N-terminal basic clusters, NLS1 (4-KRK-6) and NLS2 (15-KKPK-18). Vp1DeltaC58 pentamers harboring multiple-point mutations in NLS1 (NLSm1), NLS2 (NLSm2), or both basic clusters (NLSm1. 2) had progressively decreased DNA-binding activity, down to 0.7% of the Vp1DeltaC58 level for NLSm1. 2 Vp1. These data, along with those of N-terminally truncated proteins, placed the DBD in overlap with the bipartite NLS. The role of the Vp1 DBD during infection was investigated by taking advantage of NLS phenotypic complementation (N. Ishii, A. Nakanishi, M. Yamada, M. H. Macalalad, and H. Kasamatsu, J. Virol. 68:8209-8216, 1994), in which an NLS-defective Vp1 could localize to the nucleus in the presence of wild-type minor capsid proteins Vp2 and Vp3. This approach made it possible to dissect the role of the bifunctional Vp1 NLS-DBD in virion assembly in the nucleus. Mutants of the viable nonoverlapping SV40 (NO-SV40) DNA NLSm1, NLSm2, and NLSm1. 2 replicated normally following transfection into host cells and produced capsid proteins at normal levels. All mutant Vp1s were able to interact with Vp3 in vitro. The mutants NLSm1 and NLSm1. 2 were nonviable, and the mutant Vp1s unexpectedly failed to localize to the nucleus though Vp2 and Vp3 did, suggesting that the mutated NLS1 acted as a dominant signal for the cytoplasmic localization of Vp1. Mutant NLSm2, for which the mutant Vp1's nuclear localization defect was complemented by Vp2 and Vp3, displayed a 5,000-fold reduced viability. Analysis of NLSm2 DNA-transfected cell lysate revealed a 10-fold reduction in the level of DNase I-protected viral DNA, and yet virion-like particles were found among the DNase I-resistant material. Collective results support a role for Vp1 NLS2-DBD2 in the assembly of virion particles. The results also suggest that this determinant can function in the infection of new cells.

Analysis of minimal sequences on JC virus VP1 required for capsid assembly

Human JC virus (JCV) belongs to the family of Polyomaviridae. The viral capsid is composed of 72 capsomeres. Five VP1 molecules make up a capsomere structure. To investigate the minimal sequences on JCV VP1 polypeptide required for capsid assembly, the first 12 (Delta N12) and 19 (Delta N19) amino acids at the N-terminus and the last 16 (Delta C16), 17 (Delta C17), and 31 (Delta C31) amino acids at the C-terminus of VP1 were truncated and expressed in E. coli. The VP1 proteins of Delta N12 and Delta C16 were able to self-assemble into a virus-like particle similar to that of wild-type (WT) VP1. However, the mutant proteins of Delta N19, Delta C17, and Delta C31 formed a pentameric capsomere structure as demonstrated by a 10-50% sucrose gradient centrifugation and electron microscopy. These results suggest that the 12 amino-terminal and 16 carboxy-terminal amino acids of VP1 are dispensable for the formation of virus-like particles, and further truncation at either end of VP1 leads to the loss of this property.

Cys(9), Cys(104) and Cys(207) of simian virus 40 Vp1 are essential for infectious virion formation in CV-1 cells

Structural studies have implicated Cys(9), Cys(104) and Cys(207) of simian virus 40 (SV40) Vp1 in disulfide bond formation. Recently, we have shown the three cysteines to be essential for disulfide linkage of Vp1 complexes in vitro. Here, the role of the three cysteines was explored during the course of SV40 infection. Single-, double- and triple-mutant Vp1 at Cys(9), Cys(104) and Cys(207) continued to localize to the nuclei of transfected CV-1 cells and to bind DNA, but showed a range of abilities to form plaques. Only mutants containing the Cys(9)-->Ser change showed defects in plaque formation. Single mutants at Cys(9) formed small plaques; mutants at Cys(9). Cys(104), Cys(9). Cys(207) and Cys(9). Cys(104). Cys(207) formed no plaques. All three isolated revertants contained back-mutations at the Vp1 Cys(9) codon. These results further confirm the involvement of the three Vp1 cysteines in protein-protein interactions during virus assembly. Cys(9) is critical for production of wild-type infectious virions, whereas Cys(104) and Cys(207) play secondary roles.

Disulfide bonds stabilize JC virus capsid-like structure by protecting calcium ions from chelation

To investigate the role of disulfide bonds in the capsid structure, a recombinant JC virus-like particle (VLP) was used. The major capsid protein, VP1, of the JC virus was expressed in yeast cells. The yeast-expressed VP1 was self-assembled into a VLP. Disulfide bonds were found in the VLP which caused dimeric and trimeric VP1 linkages as demonstrated by non-reducing SDS-PAGE. The VLP remained intact when disulfide bonds were reduced by dithiothreitol. The VLP without disulfide bonds could be disassembled into capsomeres by EGTA alone, but those with disulfide bonds could not be disassembled by EGTA. Capsomeres were reassembled into VLPs in the presence of calcium ions. Capsomeres formed irregular aggregations instead of VLPs when treated with diamide to reconstitute the disulfide bonds. These results indicate that disulfide bonds play an important role in maintaining the integrity of the JC VLP by protecting calcium ions from chelation.

The familiar and the unexpected in structures of icosahedral viruses

Viruses were the first large macromolecular assemblages to be visualized at high resolution. New virus structures continue to challenge our understanding of specificity in protein-protein "recognition". The evolution of virus structures has been even more opportunistic than previously imagined.

Alphavirus nucleocapsid protein contains a putative coiled coil alpha-helix important for core assembly

The alphavirus nucleocapsid core is formed through the energetic contributions of multiple noncovalent interactions mediated by the capsid protein. This protein consists of a poorly conserved N-terminal region of unknown function and a C-terminal conserved autoprotease domain with a major role in virion formation. In this study, an 18-amino-acid conserved region, predicted to fold into an alpha-helix (helix I) and embedded in a low-complexity sequence enriched with basic and Pro residues, has been identified in the N-terminal region of the alphavirus capsid proteins. In Sindbis virus, helix I spans residues 38 to 55 and contains three conserved leucine residues, L38, L45, and L52, conforming to the heptad amino acid organization evident in leucine zipper proteins. Helix I consists of an N-terminally truncated heptad and two complete heptad repeats with beta-branched residues and conserved leucine residues occupying the a and d positions of the helix, respectively. Complete or partial deletion of helix I, or single-site substitutions at the conserved leucine residues (L45 and L52), caused a significant decrease in virus replication. The mutant viruses were more sensitive to elevated temperature than wild-type virus. These mutant viruses also failed to accumulate cores in the cytoplasm of infected cells, although they did not have defects in protein translation or processing. Analysis of these mutants using an in vitro assembly system indicated that the majority were defective in core particle assembly. Furthermore, mutant proteins showed a trans-dominant negative phenotype in in vitro assembly reactions involving mutant and wild-type proteins. We propose that helix I plays a central role in the assembly of nucleocapsid cores through coiled coil interactions. These interactions may stabilize subviral intermediates formed through the interactions of the C-terminal domain of the capsid protein and the genomic RNA and contribute to the stability of the virion.

Roles of partly unfolded conformations in macromolecular self-assembly

From genes to cells there are many steps of hierarchical increments in building up complex frameworks that provide intricate networks of macromolecular interactions, through which cellular activities such as gene expression, signal processing, energy transduction and material conversion are dynamically organized and regulated. The self-assembly of macromolecules into large complexes is one such important step, but this process is by no means a simple aggregation of macromolecules with predefined, rigid complementary structures. In many cases the component molecules undergo either domain rearrangements or folding of disordered portions, which occurs only following binding to their correct partners. The partial disorder is used in some cases to prevent spontaneous assembly at inappropriate times or locations. It is also often used for finely tuning the equilibrium and activation energy of reversible binding. In other cases, such as protein translocation across membranes, an unfolded terminus appears to be the prerequisite for the process as an initiation signal, as well as the physical necessity to be taken into narrow channels. Self-assembly processes of viruses and bacterial flagella are typical examples where the induced folding of disordered chains plays a key role in regulating the addition of new components to a growing assembly. Various aspects of mechanistic roles of natively unfolded conformations of proteins are overviewed and discussed in this short review.

Roles of disulfide linkage and calcium ion-mediated interactions in assembly and disassembly of virus-like particles composed of simian virus 40 VP1 capsid protein

The simian virus 40 capsid is composed of 72 pentamers of VP1 protein. Although the capsid is known to dissociate to pentamers in vitro following simultaneous treatment with reducing and chelating agents, the functional roles of disulfide linkage and calcium ion-mediated interactions are not clear. To elucidate the roles of these interactions, we introduced amino acid substitutions in VP1 at cysteine residues and at residues involved in calcium binding. We expressed the mutant proteins in a baculovirus system and analyzed both their assembly into virus-like particles (VLPs) in insect cells and the disassembly of those VLPs in vitro. We found that disulfide linkages at both Cys-9 and Cys-104 conferred resistance to proteinase K digestion on VLPs, although neither linkage was essential for the formation of VLPs in insect cells. In particular, reduction of the disulfide linkage at Cys-9 was found to be critical for VLP dissociation to VP1 pentamers in the absence of calcium ions, indicating that disulfide linkage at Cys-9 prevents VLP dissociation, probably by increasing the stability of calcium ion binding. We found that amino acid substitutions at carboxy-terminal calcium ion binding sites (Glu-329, Glu-330, and Asp-345) resulted in the frequent formation of unusual tubular particles as well as VLPs in insect cells, indicating that these residues affect the accuracy of capsid assembly. In addition, unexpectedly, amino acid substitutions at any of the calcium ion binding sites tested, especially at Glu-157, resulted in increased stability of VLPs in the absence of calcium ions in vitro. These results suggest that appropriate affinities of calcium ion binding are responsible for both assembly and disassembly of the capsid.

Role of simian virus 40 Vp1 cysteines in virion infectivity

We have developed a new nonoverlapping infectious viral genome (NO-SV40) in order to facilitate structure-based analysis of the simian virus 40 (SV40) life cycle. We first tested the role of cysteine residues in the formation of infectious virions by individually mutating the seven cysteines in the major capsid protein, Vp1. All seven cysteine mutants-C9A, C49A, C87A, C104A, C207S, C254A, and C267L-retained viability. In the crystal structure of SV40, disulfide bridges are formed between certain Cys104 residues on neighboring pentamers. However, our results show that none of these disulfide bonds are required for virion infectivity in culture. We also introduced five different mutations into Cys254, the most strictly conserved cysteine across the polyomavirus family. We found that C254L, C254S, C254G, C254Q, and C254R mutants all showed greatly reduced (around 100,000-fold) plaque-forming ability. These mutants had no apparent defect in viral DNA replication. Mutant Vp1's, as well as wild-type Vp2/3, were mostly localized in the nucleus. Further analysis of the C254L mutant revealed that the mutant Vp1 was able to form pentamers in vitro. DNase I-resistant virion-like particles were present in NO-SV40-C254L-transfected cell lysate, but at about 1/18 the amount in wild-type-transfected lysate. An examination of the three-dimensional structure reveals that Cys254 is buried near the surface of Vp1, so that it cannot form disulfide bonds, and is not involved in intrapentamer interactions, consistent with the normal pentamer formation by the C254L mutant. It is, however, located at a critical junction between three pentamers, on a conserved loop (G2H) that packs against the dual interpentamer Ca(2+)-binding sites and the invading C-terminal helix of an adjacent pentamer. The substitution by the larger side chains is predicted to cause a localized shift in the G2H loop, which may disrupt Ca(2+) ion coordination and the packing of the invading helix, consistent with the defect in virion assembly. Our experimental system thus allows dissection of structure-function relationships during the distinct steps of the SV40 life cycle.

Rapid small-scale isolation of SV40 virions and SV40 DNA

A rapid method for the small-scale isolation of SV40 virions and SV40 DNA is presented. CV-1 monkey epithelial cells are transfected with linear SV40 DNA. After the onset of transfection, cells are lysed by several freeze/thaw cycles and virions are isolated using polyethylene glycol (PEG) precipitation of DNase I treated lysates. Viral DNA is released by proteinase K and dithiothreitol treatment of the isolated virions followed by phenol/chloroform extraction and ethanol precipitation. This method yields on average 7.5x10(4) plaque forming units (PFUs) and DNA of adequate purity and concentration to be used for restriction analysis on ethidium bromide agarose gels from a single 35-mm tissue culture dish.

Role of Ca2+in the replication and pathogenesis of rotavirus and other viral infections

Ca2+ plays a key role in many pathological processes, including viral infections. Rotavirus, the major etiological agent of viral gastroenteritis in children and young animals, provides a useful model to study a number of Ca2+ dependent virus-cell interactions. Rotavirus entry, activation of transcription, morphogenesis, cell lysis, particle release, and the distant action of viral proteins are Ca2+ dependent processes. In the extracellular medium, Ca2+ stabilizes the structure of the viral capsid. During entry into the cell the low cytoplasmic Ca2+ concentration induced the solubilization of the outer protein layer of the capsid and transcriptase activation. Viral protein synthesis modifies Ca2+ homeostasis which, in turn, favours viral morphogenesis and induces cell death. The generation of diarrhea is a multifactorial process involving Ca2+ dependent secretory processes of mediators and water and electrolytes, as well as the induction of cell death in the different cell types that compose the intestinal epithelium. The discovery of the non-structural viral protein NSP4 as a viral enterotoxin and the possible participation of the enteric nervous system in the pathogenesis of diarrhea represent significant advances in its understanding. Ca2+ also plays a role in the replication cycles and pathogenesis of other viral diseases such as poliovirus, Coxsackie virus, cytomegalovirus, vaccinia and measles virus and HIV.

Freedom and restraint: themes in virus capsid assembly

Viruses assemble protective capsids from several copies of one or a few structural proteins. This is accomplished through a combination of conformational flexibility and control mechanisms that restrict this flexibility. This review will discuss some of these mechanisms in light of the many recent results in this area.

Mechanism of assembly of recombinant murine polyomavirus-like particles

VP1 is the major viral coat protein of murine polyomavirus and can be used for the generation of virus-like particles in vitro. Here, we demonstrate that capsid assembly is an equilibrium reaction followed by oxidation of intracapsomere disulfide bonds, which are not essential for the formation of virus-like particles but enable complete particle assembly and prevent capsid disassembly.

Analysis of capsid formation of human polyomavirus JC (Tokyo-1 strain) by a eukaryotic expression system: splicing of late RNAs, translation and nuclear transport of major capsid protein VP1, and capsid assembly

Human polyomavirus JC (JCV) can encode the three capsid proteins VP1, VP2, and VP3, downstream of the agnoprotein in the late region. JCV virions are identified in the nucleus of infected cells. In this study, we have elucidated unique features of JCV capsid formation by using a eukaryotic expression system. Structures of JCV polycistronic late RNAs (M1 to M4 and possibly M5 and M6) generated by alternative splicing were determined. VP1 would be synthesized from M2 RNA, and VP2 and VP3 would be synthesized from M1 RNA. The presence of the open reading frame of the agnoprotein or the leader sequence (nucleotides 275 to 409) can decrease the expression level of VP1. VP1 was efficiently transported to the nucleus in the presence of VP2 and VP3 but distributed both in the cytoplasm and in the nucleus in their absence. Mutation analysis indicated that inefficiency in nuclear transport of VP1 is due to the unique structure in the N-terminal sequence, KRKGERK. Within the nucleus, VP1 was localized discretely and identified as speckles in the presence of VP2 and VP3 but distributed diffusely in their absence. These results suggest that VP1 was efficiently transported to the nucleus and localized in the discrete subnuclear regions, possibly with VP2 and VP3. By electron microscopy, recombinant virus particles were identified in the nucleus, and their intranuclear distribution was consistent with distribution of speckles. This system provides a useful model with which to understand JCV capsid formation and the structures and functions of the JCV capsid proteins.

Geometry of phage head construction

The process of phage capsid assembly is reviewed, with particular attention to the probable role of curvature in helping to determine head size and shape. Both measures of curvature (mean curvature and Gaussian curvature, explained in Appendix I), should act best when the assembling shell is spherical, which could account for procapsids having this shape. Procapsids are also relatively thick, which should help head size determination by the mean curvature. The accessory role of inner and outer scaffolds in size determination and head nucleation is also reviewed. Nucleation failure generates various malformations, including non-closure, but the most common is the tube or polyhead, where the subunits' inherent curvature is expressed as a constant mean curvature. This induces lattice distortions that only partly understood. An extra tubular section in normal heads leads to the prolate shape, with a more complex and variable geometry. Newly assembled procapsids are both enlarged and toughened by the head transformation. In the procapsid the Gaussian curvature is uniformly distributed. But toughening tends to equalize bond lengths, so all the Gaussian curvature gets concentrated in the vertices, being zero elsewhere. This explains head angularization. Because of this change in Gaussian curvature, the regular subunit packing in the polyhedral head cannot be mapped onto the procapsid. This explains part of the hexon distortions found in this region. The implications of translocase-induced DNA twist, end rotation and the coiling of packaged DNA, are discussed. The symmetry mismatches between the head, connector and tail are discussed in relation to the possible alpha-helical structures of their DNA channels.

Turing patterns on a sphere

We address the problem of pattern formation on the surface of a sphere using Turing equations. By considering a generic reaction-diffusion model, we numerically investigate the patterns formed under different conditions on the parameter values. Our results show that a closed surface with curvature, as a sphere, imposes geometrical restrictions on the shape of the pattern. This is important in some biological systems where curvature plays an important role in guiding chemical, biochemical, and embryological processes.

Cys9, Cys104 and Cys207 of simian virus 40 Vp1 are essential for inter-pentamer disulfide-linkage and stabilization in cell-free lysates

Previous studies have implicated disulfide bonds between Vp1 molecules in the stabilization of the simian virus 40 (SV40) capsid. To identify the cysteine residues involved in intermolecular disulfide interactions, systematic oligo-directed mutagenesis of cysteine codons to serine codons was initiated. Wild-type and mutant Vp1 proteins were produced in rabbit reticulocyte lysates and were allowed to interact post-translationally. Disulfide-linked Vp1 complexes were assessed via non-reducing SDS-PAGE and via sucrose-gradient sedimentation. Wild-type Vp1 forms 7S pentamers followed by 12S disulfide-linked multi-pentameric complexes in cell-free lysates. Mutagenesis of all seven cysteine codons abolished Vp1 12S complexes, but did not affect pentamer formation. A quadruple Vp1 mutant at Cys49, Cys87, Cys254 and Cys267 continued to form 12S complexes, whereas the major products of the Cys9, Cys104 and Cys207 triple mutant Vp1 were 7S pentamers. Single and double mutant Vp1 proteins at the three cysteines affected continued to form 12S complexes, but to a lesser extent. Thus, inter-pentamer disulfide bonds at Cys9, Cys104 and Cys207 are essential and sufficient for stabilization of Vp1 complexes in cell-free lysates. These results are in agreement with previous structural studies of SV40 that implicated the same three residues in disulfide linkage in the capsid. Possible parameters for the involvement of the three cysteines are discussed.

Exploitation of major histocompatibility complex class I molecules and caveolae by simian virus 40

Simian virus 40 (SV40), a non-enveloped DNA virus, is transported from the cell surface to the nucleus where virus replication occurs. This pathway of virus uptake involves binding to surface MHC class I molecules, entry via non-coated pits, and subsequent transport to the endoplasmic reticulum (ER). At some stage in this pathway the virus must cross a membrane to reach the cytosol. In the present review, the cellular machinery which the virus has utilized to enter the cell will be examined. In particular, we will consider recent evidence for the involvement of caveolae in the infectious entry step and propose a model involving recruitment of caveolar proteins around the membrane-bound virus. We also speculate that a similar mechanism may have been exploited by bacterial pathogens. The subsequent steps by which SV40 reaches the ER remain unclear but recent evidence suggests that this pathway may be shared with several other proteins that are transported from surface caveolae to the ER.

Low-resolution density maps from atomic models: how stepping "back" can be a step "forward"

Atomic-resolution structures have had a tremendous impact on modern biological science. Much useful information also has been gleaned by merging and correlating atomic-resolution structural details with lower-resolution (15-40 A), three-dimensional (3D) reconstructions computed from images recorded with cryo-transmission electron microscopy (cryoTEM) procedures. One way to merge these structures involves reducing the resolution of an atomic model to a level comparable to a cryoTEM reconstruction. A low-resolution density map can be derived from an atomic-resolution structure by retrieving a set of atomic coordinates editing the coordinate file, computing structure factors from the model coordinates, and computing the inverse Fourier transform of the structure factors. This method is a useful tool for structural studies primarily in combination with 3D cryoTEM reconstructions. It has been used to assess the quality of 3D reconstructions, to determine corrections for the phase-contrast transfer function of the transmission electron microscope, to calibrate the dimensions and handedness of 3D reconstructions, to produce difference maps, to model features in macromolecules or macromolecular complexes, and to generate models to initiate model-based determination of particle orientation and origin parameters for 3D reconstruction.

Site-specific fluorescence labelling of recombinant polyomavirus-like particles

For the development of gene therapy protocols based on polyomavirus-like particles, we describe a method for fluorescence labelling of virions in order to study virus-cell interactions preceding gene delivery. Site-specific fluorescence labelling of polyomavirus-like particles is achieved via a single cysteine residue and maleimide conjugates of fluorescence dyes (fluorescein, Texas Red). Polyomavirus-like particles can be assembled in vitro from recombinant capsomers produced in E. coli. Since the assembly process is independent of disulfide bond formation, all cysteine residues of the wild-type protein were replaced by serines, and a new unique cysteine residue was introduced for the attachment of the fluorescence marker.

Papillomavirus assembly requires trimerization of the major capsid protein by disulfides between two highly conserved cysteines

We have used viruslike particles (VLPs) of human papillomaviruses to study the structure and assembly of the viral capsid. We demonstrate that mutation of either of two highly conserved cysteines of the major capsid protein L1 to serine completely prevents the assembly of VLPs but not of capsomers, whereas mutation of all other cysteines leaves VLP assembly unaffected. These two cysteines form intercapsomeric disulfides yielding an L1 trimer. Trimerization comprises about half of the L1 molecules in VLPs but all L1 molecules in complete virions. We suggest that trimerization of L1 is indispensable for the stabilization of intercapsomeric contacts in papillomavirus capsids.

Spherical viruses

In the past two years, structural studies on spherical viruses have experienced a significant advance with the dramatic increase in the resolution attainable by cryo-electron microscopy and image reconstruction. X-ray crystallography, both alone and, increasingly, in combination with electron microscopy, continues to play a crucial role in elucidating how viruses function.

Intercapsomeric disulfide bonds in papillomavirus assembly and disassembly

In order to analyze bonding contacts that stabilize the virion or promote capsid assembly, bovine papillomavirus (BPV) virions were subjected to buffer conditions known to disrupt polyomavirus virions. At physiologic ionic strength, incubation with dithiothreitol (DTT), EGTA, or DTT plus EGTA did not disrupt BPV virions as determined by electron microscopy. However, incubation of virions with DTT rendered the BPV L1 protein susceptible to trypsin cleavage at its carboxy terminus and rendered the genome susceptible to digestion with DNase I. When DTT-treated BPV virions were analyzed by analytical ultracentrifugation, they sedimented at 230S compared with 273S for untreated virions, suggesting a capsid shell expansion. Incubation with EGTA had no effect on trypsin or DNase I sensitivity and only a small effect upon the virion S value. A single cysteine residue conserved among BPV and human papillomavirus (HPV) L1 proteins resides within the trypsin-sensitive carboxy terminus of L1, which is required for capsid assembly. A recombinant HPV type 11 L1 protein, which was purified after expression in Escherichia coli and which has a Cys-to-Gly change at this position (Cys424), formed pentamers; however, unlike the wild-type protein, these mutant pentamers could no longer assemble in vitro into capsid-like structures. These results indicate an important role for interpentamer disulfide bonds in papillomavirus capsid assembly and disassembly and suggest a mechanism of virus uncoating in the reducing environment of the cytoplasm.

Quantitative disassembly and reassembly of human papillomavirus type 11 viruslike particles in vitro

The human papillomavirus (HPV) capsid is primarily composed of a structural protein denoted L1, which forms both pentameric capsomeres and capsids composed of 72 capsomeres. The L1 protein alone is capable of self-assembly in vivo into capsidlike structures referred to as viruslike particles (VLPs). We have determined conditions for the quantitative disassembly of purified HPV-11 L1 VLPs to the level of capsomeres, demonstrating that disulfide bonds alone are essential to maintaining long-term HPV-11 L1 VLP structure at physiological ionic strength. The ionic strength of the disassembly reaction was also important, as increased NaCl concentrations inhibited disassembly. Conversely, chelation of cations had no effect on disassembly. Quantitative reassembly to a homogeneous population of 55-nm, 150S VLPs was reliably achieved by the re-formation of disulfide linkages following removal of reducing agent at near-neutral pH and moderate NaCl concentration. HPV-11 L1 VLPs could also be dissociated by treatment with carbonate buffer at pH 9.6, but VLPs could not be regenerated following carbonate treatment. When probed with conformationally sensitive and/or neutralizing monoclonal antibodies, both capsomeres generated by disulfide reduction of purified VLPs and reassembled VLPs formed from capsomeres upon removal of reducing agents exhibited epitopes found on the surface of authentic HPV-11 virions. Antisera raised against either purified VLP starting material or reassembled VLPs similarly neutralized infectious HPV-11 virions. The ability to disassemble and reassemble VLPs in vitro and in bulk allows basic features of capsid assembly to be studied and also opens the possibility of packaging selected exogenous compounds within the reassembled VLPs.

Crystal structure of truncated human apolipoprotein A-I suggests a lipid-bound conformation

The structure of truncated human apolipoprotein A-I (apo A-I), the major protein component of high density lipoprotein, has been determined at 4-A resolution. The crystals comprise residues 44-243 (exon 4) of apo A-I, a fragment that binds to lipid similarly to intact apo A-I and that retains the lipid-bound conformation even in the absence of lipid. The molecule consists almost entirely of a pseudo-continuous, amphipathic alpha-helix that is punctuated by kinks at regularly spaced proline residues; it adopts a shape similar to a horseshoe of dimensions 125 x 80 x 40 A. Four molecules in the asymmetric unit associate via their hydrophobic faces to form an antiparallel four-helix bundle with an elliptical ring shape. Based on this structure, we propose a model for the structure of apo A-I bound to high density lipoprotein.

Crystals of Rous sarcoma virus capsid protein show a helical arrangement of protein subunits

Crystals of Rous sarcoma virus (RSV) capsid protein diffract X rays to 3.5 A resolution and belong to the monoclinic space group C2 with unit cell parameters a = 374.4 A, b = 128.1 A, c = 200.2 A, and beta = 121.8 degrees. One asymmetric unit of the crystal may contain between 28 and 35 molecules, based on reasonable crystal density assumptions. A self-rotation function and Patterson synthesis suggest that RSV capsid protein crystallizes as a helical array. The determinants of the viral particle morphology are not encoded in the capsid alone. The assembly of a helical array in the crystal reflects the absence of any conformational switching. However, it is expected that the subunit interactions seen in the crystal will be preferred and will relate to those found in the immature or mature virion.

Synchrotron radiation applications to macromolecular crystallography

Progress has been rapid in the development and application of four different types of macromolecular crystallographic experiment at synchrotron hard X-ray sources: multiwavelength anomalous diffraction; studies of crystals with very large unit cell dimensions; structure determination at atomic or near-atomic resolution; and time-resolved studies. The results illustrate the interplay between the advanced technical capabilities available at new beamlines and more challenging scientific issues.

High-resolution structure of a polyomavirus VP1-oligosaccharide complex: implications for assembly and receptor binding

The crystal structure of a recombinant polyomavirus VP1 pentamer (residues 32-320) in complex with a branched disialylated hexasaccharide receptor fragment has been determined at 1.9 A resolution. The result extends our understanding of oligosaccharide receptor recognition. It also suggests a mechanism for enhancing the fidelity of virus assembly. We have previously described the structure of the complete polyomavirus particle complexed with this receptor fragment at 3.65 A. The model presented here offers a much more refined view of the interactions that determine carbohydrate recognition and allows us to assign additional specific contacts, in particular those involving the (alpha2,6)-linked, branching sialic acid. The structure of the unliganded VP1 pentamer, determined independently, shows that the oligosaccharide fits into a preformed groove and induces no measurable structural rearrangements. A comparison with assembled VP1 in the virus capsid reveals a rearrangement of residues 32-45 at the base of the pentamer. This segment may help prevent the formation of incorrectly assembled particles by reducing the likelihood that the C-terminal arm will fold back into its pentamer of origin.