Bacterial cell division and the Z ring

Characterization of the Mycoplasma hominis ftsZ gene and its sequence variability in mycoplasma clinical isolates

We cloned and sequenced Mycoplasma hominis chromosomal fragment containing ftsZ gene. The wild-type expression of the gene was shown at RNA level by reverse transcription followed by PCR amplification. We revealed that M. hominis FtsZ had a comparatively low similarity to proteins of Mycoplasma genitalium and Mycoplasma pneumoniae. After full ftsZ gene sequencing for 14 clinical isolates of M. hominis, single-nucleotide substitutions were found in 21 positions, 6 of them being common for almost all isolates. This ftsZ gene polymorphism may be used for subtyping of M. hominis in clinical samples. Expression of the M. hominis ftsZ gene in different Escherichia coli strains was also demonstrated, and M. hominis FtsZ protein was purified from E. coli cells transformed with recombinant expression plasmid. Complementation between the M. hominis FtsZ and E. coli FtsZ could be shown. The comparison of FtsZ protein structures may also be used for investigation of bacterial phylogenetic relationships.

Asymmetric cell division in B. subtilis involves a spiral-like intermediate of the cytokinetic protein FtsZ

A fundamental feature of development in the spore-forming bacterium Bacillus subtilis is the switch from medial to asymmetric division. The switch is brought about by a change in the location of the cytokinetic Z ring, which is composed of the tubulin-like protein FtsZ, from the cell middle to the poles during sporulation. We report that the medial Z ring is replaced by a spiral-like filament of FtsZ that grows along the long axis of the cell. We propose that the filament mediates the switch by redeploying FtsZ to the poles. Spiral formation and the switch to polar Z rings are largely caused by a sporulation-specific increase in transcription of the gene for FtsZ and activation of the gene for the FtsZ-associated protein SpoIIE.

Physiological consequences associated with overproduction of Mycobacterium tuberculosis FtsZ in mycobacterial hosts

The ftsZ gene of Mycobacterium tuberculosis H37Rv has been characterized as the first step in determining the molecular events involved in the cell division process in mycobacteria. Western analysis revealed that intracellular levels of FtsZ are growth phase dependent in both M. tuberculosis and Mycobacterium smegmatis. Unregulated expression of M. tuberculosis ftsZ from constitutive hsp60 and dnaA promoters in M. tuberculosis hosts resulted in lethality whereas expression from only the hsp60 promoter was toxic in M. smegmatis hosts. Expression of ftsZ from the dnaA promoter in M. smegmatis resulted in approximately sixfold overproduction and the merodiploids exhibited slow growth, an increased tendency to clump and filament, and in some cases produced buds and branches. Many of the cells also contained abnormal and multiple septa. Expression of ftsZ from the chemically inducible acetamidase promoter in M. smegmatis hosts resulted in approximately 22-fold overproduction of FtsZ and produced filamentous cells, many of which lacked any visible septa. Visualization of the M. tuberculosis FtsZ tagged with green fluorescent protein in M. smegmatis by fluorescence microscopy revealed multiple fluorescent FtsZ foci, suggesting that steps subsequent to the formation of organized FtsZ structures but prior to septum formation are blocked in FtsZ-overproducing cells. Together these results suggest that the intracellular concentration of FtsZ protein is critical for productive septum formation in mycobacteria.

Membrane topology of the Streptococcus pneumoniae FtsW division protein

The topology of FtsW from Streptococcus pneumoniae, an essential membrane protein involved in bacterial cell division, was predicted by computational methods and probed by the alkaline phosphatase fusion and cysteine accessibility techniques. Consistent results were obtained for the seven N-terminal membrane-spanning segments. However, the results from alkaline phosphatase fusions did not confirm the hydropathy analysis of the C-terminal part of FtsW, whereas the accessibility of introduced cysteine residues was in agreement with the theoretical prediction. Based on the combined results, we propose the first topological model of FtsW, featuring 10 membrane-spanning segments, a large extracytoplasmic loop, and both N and C termini located in the cytoplasm.

Rapid assembly dynamics of the Escherichia coli FtsZ-ring demonstrated by fluorescence recovery after photobleaching

FtsZ, the major cytoskeletal component of the bacterial cell-division machine, assembles into a ring (the Z-ring) that contracts at septation. FtsZ is a bacterial homolog of tubulin, with similar tertiary structure, GTP hydrolysis, and in vitro assembly. We used green fluorescent protein-labeled FtsZ and fluorescence recovery after photobleaching to show that the E. coli Z-ring is extremely dynamic, continually remodeling itself with a half-time of 30 s. ZipA, a membrane protein involved in cell division that colocalizes with FtsZ, was equally dynamic. The Z-ring of the mutant ftsZ84, which has 1/10 the guanosine triphosphatase activity of wild-type FtsZ in vitro, showed a 9-fold slower turnover in vivo. This finding implies that assembly dynamics are determined primarily by GTP hydrolysis. Despite the greatly reduced assembly dynamics, the ftsZ84 cells divide with a normal cell-cycle time.

Unique and overlapping roles for ZipA and FtsA in septal ring assembly in Escherichia coli

ZipA and FtsA are essential division proteins in Escherichia coli that are recruited to the division site by interaction with FtsZ. Utilizing a newly isolated temperature-sensitive mutation in zipA we have more fully characterized the role of ZipA. We confirmed that ZipA is not required for Z ring formation; however, we found that ZipA, like FtsA, is required for recruitment of FtsK and therefore all downstream division proteins. In the absence of FtsA or ZipA Z rings formed; however, in the absence of both, new Z rings were unable to form and preformed Z rings were destabilized. Consistent with this, we found that an FtsZ mutant unable to interact with both ZipA and FtsA was unable to assemble into Z rings. These results demonstrate that ZipA and FtsA are both required for recruitment of additional division proteins to the Z ring, but either one is capable of supporting formation and stabilization of Z rings.

Evidence that a eukaryotic-type serine/threonine protein kinase from Mycobacterium tuberculosis regulates morphological changes associated with cell division

A eukaryotic-type protein serine/threonine kinase, PknA, was cloned from Mycobacterium tuberculosis strain H37Ra. Sequencing of the clone indicated 100% identity with the published pknA sequence of M. tuberculosis strain H37Rv. PknA fused to maltose-binding protein was expressed in Escherichia coli; it exhibited a molecular mass of approximately 97 kDa. The fusion protein was purified from the soluble fraction by affinity chromatography using amylose resin. In vitro kinase assays showed that the autophosphorylating ability of PknA is strictly magnesium/manganese-dependent, and sodium orthovanadate can inhibit this activity. Phosphoamino-acid analysis indicated that PknA phosphorylates at serine and threonine residues. PknA was also able to phosphorylate exogenous substrates, such as myelin basic protein and histone. A comparison of the nucleotide-derived amino-acid sequence of PknA with that of functionally characterized prokaryotic serine/threonine kinases indicated its possible involvement in cell division/differentiation. Protein--protein interaction studies revealed that PknA is capable of phosphorylating at least a approximately 56-kDa soluble protein from E. coli. Scanning electron microscopy showed that constitutive expression of this kinase resulted in elongation of E. coli cells, supporting its regulatory role in cell division.

The Escherichia coli cell division protein FtsW is required to recruit its cognate transpeptidase, FtsI (PBP3), to the division site

The bacterial cell division protein FtsW has been suggested to perform two functions: stabilize the FtsZ cytokinetic ring, and facilitate septal peptidoglycan synthesis by the transpeptidase FtsI (penicillin-binding protein 3). We show here that depleting Escherichia coli cells of FtsW had little effect on the abundance of FtsZ rings but abrogated recruitment of FtsI to potential division sites. Analysis of FtsW localization confirmed and extended these results; septal localization of FtsW required FtsZ, FtsA, FtsQ, and FtsL but not FtsI. Thus, FtsW is a late recruit to the division site and is essential for subsequent recruitment of its cognate transpeptidase FtsI but not for stabilization of FtsZ rings. We suggest that a primary function of FtsW homologues--which are found in almost all bacteria and appear to work in conjunction with dedicated transpeptidases involved in division, elongation, or sporulation--is to recruit their cognate transpeptidases to the correct subcellular location.

Molecular evolution: actin's long lost relative found

The bacterial protein MreB has been identified as a prokaryotic homolog of the eukaryotic cytoskeletal protein actin. While we still know little about MreB's function, the structural similarities and differences between MreB and actin provide more insight into the remarkable properties of actin.

Pattern formation in Escherichia coli: a model for the pole-to-pole oscillations of Min proteins and the localization of the division site

Proper cell division requires an accurate definition of the division plane. In bacteria, this plane is determined by a polymeric ring of the FtsZ protein. The site of Z ring assembly in turn is controlled by the Min system, which suppresses FtsZ polymerization at noncentral membrane sites. The Min proteins in Escherichia coli undergo a highly dynamic localization cycle, during which they oscillate between the membrane of both cell halves. By using computer simulations we show that Min protein dynamics can be described accurately by using the following assumptions: (i) the MinD ATPase self-assembles on the membrane and recruits both MinC, an inhibitor of Z ring formation, and MinE, a protein required for MinC/MinD oscillation, (ii) a local accumulation of MinE is generated by a pattern formation reaction that is based on local self-enhancement and a long range antagonistic effect, and (iii) it displaces MinD from the membrane causing its own local destabilization and shift toward higher MinD concentrations. This local destabilization results in a wave of high MinE concentration traveling from the cell center to a pole, where it disappears. MinD reassembles on the membrane of the other cell half and attracts a new accumulation of MinE, causing a wave-like disassembly of MinD again. The result is a pole-to-pole oscillation of MinC/D. On time average, MinC concentration is highest at the poles, forcing FtsZ assembly to the center. The mechanism is self-organizing and does not require any other hypothetical topological determinant.

Assembly of an FtsZ mutant deficient in GTPase activity has implications for FtsZ assembly and the role of the Z ring in cell division

FtsZ, the ancestral homologue of eukaryotic tubulins, assembles into the Z ring, which is required for cytokinesis in prokaryotic cells. Both FtsZ and tubulin have a GTPase activity associated with polymerization. Interestingly, the ftsZ2 mutant is viable, although the FtsZ2 mutant protein has dramatically reduced GTPase activity due to a glycine-for-aspartic acid substitution within the synergy loop. In this study, we have examined the properties of FtsZ2 and found that the reduced GTPase activity is not enhanced by DEAE-dextran-induced assembly, indicating it has a defective catalytic site. In the absence of DEAE-dextran, FtsZ2 fails to assemble unless supplemented with wild-type FtsZ. FtsZ has to be at or above the critical concentration for copolymerization to occur, indicating that FtsZ is nucleating the copolymers. The copolymers formed are relatively stable and appear to be stabilized by a GTP-cap. These results indicate that FtsZ2 cannot nucleate assembly in vitro, although it must in vivo. Furthermore, the stability of FtsZ-FtsZ2 copolymers argues that FtsZ2 polymers would be stable, suggesting that stable FtsZ polymers are able to support cell division.

Isolation and characterization of topological specificity mutants of minD in Bacillus subtilis

In rod-shaped bacteria such as Bacillus subtilis, division site selection is mediated by MinC and MinD, which together function as a division inhibitor. Topological specificity is imposed by DivIVA, which ensures that MinCD specifically inhibits division close to the cell poles, while allowing division at mid-cell. MinD plays a central role in this process, as it positions and activates MinC and is dependent on DivIVA for its own positioning at the poles. To investigate MinD activities further, we have constructed and analysed a collection of minD mutants. Mutations in the conserved ATPase motifs lead to an inactive protein, possibly unable to oligomerize, but which nevertheless retains some affinity for the cell membrane. Several mutations affecting the mid- to C-terminal parts of MinD led to a protein probably unable to interact with DivIVA, but that could still stimulate division inhibition by MinC. These findings suggest that the ATPase activity of MinD is necessary for all its functions (possibly in part by controlling the oligomerization state of the protein). The other mutations may identify a surface of MinD involved in its interactions with DivIVA and a possible mechanism for control of MinD by DivIVA.

Escherichia coli division inhibitor MinCD blocks septation by preventing Z-ring formation

The min system spatially regulates division through the topological regulation of MinCD, an inhibitor of cell division. MinCD was previously shown to inhibit division by preventing assembly of the Z ring (E. Bi and J. Lutkenhaus, J. Bacteriol. 175:1118-1125, 1993); however, this was questioned in a recent report (S. S. Justice, J. Garcia-Lara, and L. I. Rothfield, Mol. Microbiol. 37:410-423, 2000) which indicated that MinCD acted after Z-ring formation and prevented the recruitment of FtsA to the Z ring. This discrepancy was due in part to alternative fixation conditions. We have therefore reinvestigated the action of MinCD and avoided fixation by using green fluorescent protein (GFP) fusions to division proteins. MinCD prevented the localization of both FtsZ-GFP and ZipA-GFP, consistent with it preventing Z-ring assembly. Consistent with a direct interaction between FtsZ and the MinCD inhibitor, we find that increased FtsZ, but not FtsA, suppresses MinCD-induced lethality. Furthermore, strains carrying various alleles of ftsZ, selected on the basis of resistance to the inhibitor SulA, displayed variable resistance to MinCD. These results are consistent with FtsZ as the target of MinCD and confirm that this inhibitor prevents Z-ring assembly.

The bacterial ParA-ParB partitioning proteins

A pair of genes designated parA and parB are encoded by many low copy number plasmids and bacterial chromosomes. They work with one or more cis-acting sites termed centromere-like sequences to ensure better than random predivisional partitioning of the DNA molecule that encodes them. The centromere-like sequences nucleate binding of ParB and titrate sufficient protein to create foci, which are easily visible by immuno-fluorescence microscopy. These foci normally follow the plasmid or the chromosomal replication oriC complexes. ParA is a membrane-associated ATPase that is essential for this symmetric movement of the ParB foci. In Bacillus subtilis ParA oscillates from end to end of the cell as does MinD of E. coli, a relative of the ParA family. ParA may facilitate ParB movement along the inner surface of the cytoplasmic membrane to encounter and become tethered to the next replication zone. The ATP-bound form of ParA appears to adopt the conformation needed to drive partition. Hydrolysis to create ParA-ADP or free ParA appears to favour a form that is not located at the pole and binds to DNA rather than the partition complex. Definition of the protein domains needed for interaction with membranes and the conformational changes that occur on interaction with ATP/ADP will provide insights into the partitioning mechanism and possible targets for inhibitors of partitioning.

Polymer stability plays an important role in the positional regulation of FtsZ

We conducted a series of experiments examining the effect of polymer stability on FtsZ localization dynamics in Bacillus subtilis. A loss-of-function mutation in ezrA, a putative polymer-destabilizing factor, suppresses the defects in FtsZ polymer stability associated with minCD overexpression. In addition, a mutation that is predicted to stabilize the FtsZ polymer leads to the formation of polar FtsZ rings. These data support the hypothesis that carefully balanced polymer stability is important for the assembly and localization of FtsZ during the bacterial cell cycle.

HscA is involved in the dynamics of FtsZ-ring formation in Escherichia coli K12

BACKGROUND

FtsZ, a homologue of eukaryotic tubulin, localizes throughout the cytoplasm in non-dividing Escherichia coli. However, it assembles in cytokinetic rings at the early stages of septation. Factors controlling the dynamics of FtsZ ring formation are unknown, and the molecular mechanism governing these dynamics is yet to be determined.

RESULTS

At 42 degrees C, JE10715 mutant bacteria formed multinucleated filaments with a highly reduced number of FtsZ-rings at potential division sites. The JE10715 phenotype resulted from a mis-sense mutation in the hscA gene which encodes a heat shock Hsp70 family protein, with a single alanine-to-valine substitution at position 192 within the ATPase domain. Both JE10715 and the hscA knockout strain of JE10715 were completely complemented by a plasmid-born, wild-type hscA gene, but not by a mutant-type hscA715 gene. An hscA conditional knockout of the wild-type strain under non-permissive conditions exhibited longer rod cells with an abnormal localization of FtsZ. The over-expression of dnaK partially complemented the JE10715 mutation. In vitro, the ATPase activity of the mutant protein HscA715 was reduced to 63% of wild-type HscA activity. HscA co-sedimented with FtsZ-polymers in the presence of GTP.

CONCLUSION

HscA is involved in FtsZ-ring formation, through a chaperon-like interaction with FtsZ. Defects in hscA, however, can partially be compensated for by redundant genes, including the wild-type dnaK.

Crystal structure of the bacterial cell division inhibitor MinC

Bacterial cell division requires accurate selection of the middle of the cell, where the bacterial tubulin homologue FtsZ polymerizes into a ring structure. In Escherichia coli, site selection is dependent on MinC, MinD and MINE: MinC acts, with MinD, to inhibit division at sites other than the midcell by directly interacting with FTSZ: Here we report the crystal structure to 2.2 A of MinC from Thermotoga maritima. MinC consists of two domains separated by a short linker. The C-terminal domain is a right-handed beta-helix and is involved in dimer formation. The crystals contain two different MinC dimers, demonstrating flexibility in the linker region. The two-domain architecture and dimerization of MinC can be rationalized with a model of cell division inhibition. MinC does not act like SulA, which affects the GTPase activity of FtsZ, and the model can explain how MinC would select for the FtsZ polymer rather than the monomer.

Escherichia coli FtsZ polymers contain mostly GTP and have a high nucleotide turnover

The cell division protein FtsZ is a GTPase structurally related to tubulin and, like tubulin, it assembles in vitro into filaments, sheets and other structures. To study the roles that GTP binding and hydrolysis play in the dynamics of FtsZ polymerization, the nucleotide contents of FtsZ were measured under different polymerizing conditions using a nitrocellulose filter-binding assay, whereas polymerization of the protein was followed in parallel by light scattering. Unpolymerized FtsZ bound 1 mol of GTP mol(-1) protein monomer. At pH 7.5 and in the presence of Mg(2+) and K(+), there was a strong GTPase activity; most of the bound nucleotide was GTP during the first few minutes but, later, the amount of GTP decreased in parallel with depolymerization, whereas the total nucleotide contents remained invariant. These results show that the long FtsZ polymers formed in solution contain mostly GTP. Incorporation of nucleotides into the protein was very fast either when the label was introduced at the onset of the reaction or subsequently during polymerization. Molecular modelling of an FtsZ dimer showed the presence of a cleft between the two subunits maintaining the nucleotide binding site open to the medium. These results show that the FtsZ polymers are highly dynamic structures that quickly exchange the bound nucleotide, and this exchange can occur in all the subunits.

Regulation of late flagellar gene transcription and cell division by flagellum assembly in Caulobacter crescentus

Biogenesis of the single polar flagellum of Caulobacter crescentus is regulated by a complex interplay of cell cycle events and the progression of flagellum assembly. The expression of class III/IV flagellar genes requires the assembly of an early flagellar basal body structure, encoded by class II genes, and is activated by the transcription factor FlbD. Previous experiments indicated that the class II flagellar gene, flbE, encoded a trans-acting factor that was required for FlbD activity. Here, using mutant alleles of flbE we have determined that FlbE is either a structural component of the flagellum or is required for flagellar assembly and does not, as originally proposed, function as a trans-acting factor. We also demonstrate that two deleted derivatives of flbE have a dominant negative effect on the transcriptional activation of class III/IV flagellar genes that can be relieved by a gain-of-function mutation in flbD called bfa. This same mutation in flbD has been shown to restore class III/IV transcription in the absence of early class II flagellar assembly. These deleted mutants of flbE also exhibited a filamentous cell phenotype that was indistinguishable from that previously observed in class II flagellar mutants. Introduction of a flbD-bfa mutation into these cells expressing the deleted alleles of flbE, as well as several class II mutant strains, restored normal cell division and FtsZ localization. These results suggest that class III/IV transcription and a step in cell division are coupled to flagellar assembly by the same genetic pathway.

THE PLASTID DIVISION MACHINE

Plastid division is essential for the maintenance of plastid populations in cells undergoing division and for the accumulation of large chloroplast numbers in photosynthetic tissues. Although the mechanisms mediating plastid division are poorly understood, ultrastructural studies imply this process is accomplished by a dynamic macromolecular machine organized into ring structures at the plastid midpoint. A key component of the engine that powers this machine is the motor-like protein FtsZ, a cytoskeletal GTPase of endosymbiotic origin that forms a ring at the plastid division site, similar to the function of its prokaryotic relatives in bacterial cytokinesis. This review considers the phylogenetic distribution and structural properties of two recently identified plant FtsZ protein families in the context of their distinct roles in plastid division and describes current evidence regarding factors that govern their placement at the division site. Because of their evolutionary and mechanistic relationship, the process of bacterial cell division provides a valuable, though incomplete, paradigm for understanding plastid division in plants.

Topological regulation of cell division in E. coli. spatiotemporal oscillation of MinD requires stimulation of its ATPase by MinE and phospholipid

Topological regulation of cell division in E. coli requires positioning a cell division inhibitor, MinC, at the poles of the cell, thus restricting the potential for division to midcell. This positioning is achieved through a rapid oscillation of MinC from pole to pole, a process requiring MinD and MinE. However, the mechanistic basis for this oscillation is not known. Here we report that MinE stimulates MinD ATPase activity, but only in the presence of phospholipid vesicles. Analysis of MinE mutants demonstrates that this stimulation is required for MinD oscillation and suggests that the level of stimulation determines the period of the oscillation. A model is presented in which the requirements for the MinD ATPase contribute spatial and temporal inputs that provide the mechanistic basis for the oscillation.

Unusual intracellular trafficking of Salmonella typhimurium in human melanoma cells

Salmonella spp. are enterobacteria capable of invading and replicating in both professional and non-professional phagocytes. Here, we investigate the fate of S. typhimurium in human melanoma MelJuSo cells. The bacterium entered MelJuSo cells by a trigger mechanism and resided within a unique organelle, the Salmonella-containing vacuole (SCV). The SCV acquired early endosomal markers transiently and then underwent a series of membrane modifications. In HeLa cells, vacuole maturation is characterized by the simultaneous acquisition of the lysosomal membrane glycoproteins (Lgps) Lamp1, CD63 and vacuolar (v)-ATPase; in MelJuSo cells, however, acquisition of CD63 and v-ATPase preceded that of Lamp1. A very striking event in MelJuSo cells was the arrest of bacterial septation starting from 8 h after infection. Bacteria nevertheless continued to elongate, remained morphologically intact and viable and were eventually exocytosed. This original feature was observed in several skin-related cells including melanocytes, suggesting that it may provide the basis for an efficient host defence mechanism against Salmonella infection.

Site-specific mutations of FtsZ--effects on GTPase and in vitro assembly

BACKGROUND

FtsZ, the major cytoskeletal protein in bacterial cytokinesis, assembles in vitro into protofilaments, which can further associate into sheets, bundles or tubes. We have constructed 16 site-directed mutants of E. coli ftsZ, and tested them for GTP hydrolysis and assembly in vitro, and for their ability to complement the temperature sensitive ftsZ84 mutation in E. coli.

RESULTS

The mutants were grouped into three classes. Benign mutants, which mapped mostly to the front and back surface of the protofilament, were able to complement ftsZ84 in vivo and showed normal assembly in vitro. GTP contact mutations had less than 10% of wild type GTPase activity. They could all assemble in vitro, and several of these mutants could complement ftsZ84. A third, and newly discovered, class of mutations mapped to the sides of the protofilaments. These lateral mutants had mostly normal GTPase and assembly in vitro, but none of them complemented ftsZ84. The non-complementing mutants showed greatly reduced expression from the pBS58 vector, suggesting possible dominant negative effects.

CONCLUSIONS

Several mutants with greatly reduced GTPase could still complement ftsZ84, suggesting that the high level of GTPase observed in vitro is not essential for in vivo function. All of the lateral mutants failed to complement ftsZ84, which suggests that these surfaces of the protofilaments are important for function in cell division. These lateral surfaces may mediate association of FtsZ protofilaments into pairs or small sheets, although their structure is apparently different from the sheets assembled in DEAE dextran or calcium.

Genetic analysis of the Escherichia coli FtsZ.ZipA interaction in the yeast two-hybrid system. Characterization of FtsZ residues essential for the interactions with ZipA and with FtsA

The recruitment of ZipA to the septum by FtsZ is an early, essential step in cell division in Escherichia coli. We have used polymerase chain reaction-mediated random mutagenesis in the yeast two-hybrid system to analyze this interaction and have identified residues within a highly conserved sequence at the C terminus of FtsZ as the ZipA binding site. A search for suppressors of a mutation that causes a loss of interaction (ftsZ(D373G)) identified eight different changes at two residues within this sequence. In vitro, wild type FtsZ interacted with ZipA with a high affinity in an enzyme-linked immunosorbent assay, whereas FtsZ(D373G) failed to interact. Two mutant proteins examined restored this interaction significantly. In vivo, the alleles tested are significantly more toxic than the wild type ftsZ and cannot complement a deletion. We have shown that a fusion, which encodes the last 70 residues of FtsZ in the two-hybrid system, is sufficient for the interaction with FtsA and ZipA. However, when the wild type sequence is compared with one that encodes FtsZ(D373G), no interaction was seen with either protein. Mutations surrounding Asp-373 differentially affected the interactions of FtsZ with ZipA and FtsA, indicating that these proteins bind the C terminus of FtsZ differently.

FtsZ ring formation at the chloroplast division site in plants

Among the events that accompanied the evolution of chloroplasts from their endosymbiotic ancestors was the host cell recruitment of the prokaryotic cell division protein FtsZ to function in chloroplast division. FtsZ, a structural homologue of tubulin, mediates cell division in bacteria by assembling into a ring at the midcell division site. In higher plants, two nuclear-encoded forms of FtsZ, FtsZ1 and FtsZ2, play essential and functionally distinct roles in chloroplast division, but whether this involves ring formation at the division site has not been determined previously. Using immunofluorescence microscopy and expression of green fluorescent protein fusion proteins in Arabidopsis thaliana, we demonstrate here that FtsZ1 and FtsZ2 localize to coaligned rings at the chloroplast midpoint. Antibodies specific for recognition of FtsZ1 or FtsZ2 proteins in Arabidopsis also recognize related polypeptides and detect midplastid rings in pea and tobacco, suggesting that midplastid ring formation by FtsZ1 and FtsZ2 is universal among flowering plants. Perturbation in the level of either protein in transgenic plants is accompanied by plastid division defects and assembly of FtsZ1 and FtsZ2 into filaments and filament networks not observed in wild-type, suggesting that previously described FtsZ-containing cytoskeletal-like networks in chloroplasts may be artifacts of FtsZ overexpression.

Dynamic localization cycle of the cell division regulator MinE in Escherichia coli

The MinC protein directs placement of the division septum to the middle of Escherichia coli cells by blocking assembly of the division apparatus at other sites. MinD and MinE regulate MinC activity by modulating its cellular location in a unique fashion. MinD recruits MinC to the membrane, and MinE induces MinC/MinD to oscillate rapidly between the membrane of opposite cell halves. Using fixed cells, we previously found that a MinE-green fluorescent protein fusion accumulated in an annular structure at or near the midcell, as well as along the membrane on only one side of the ring. Here we show that in living cells, MinE undergoes a rapid localization cycle that appears coupled to MinD oscillation. The results show that MinE is not a fixed marker for septal ring assembly. Rather, they support a model in which MinE stimulates the removal of MinD from the membrane in a wave-like fashion. These waves run from a midcell position towards the poles in an alternating sequence such that the time-averaged concentration of division inhibitor is lowest at midcell.

The many shapes of mitochondrial membranes

The roles of mitochondria in cell death and in aging have generated much excitement in recent years. At the same time, however, a quiet revolution in our thinking about mitochondrial ultrastructure has begun. This revolution started with the use of vital dyes and of green fluorescent protein fusion proteins, showing that mitochondria are very dynamic structures that constantly move, divide and fuse throughout the life of a cell. More recently, some of the first proteins contributing to these various processes have been discovered. Our view of the internal structures of mitochondria has also changed. Three-dimensional reconstructions obtained with high voltage electron microscopy show that cristae are often connected to the mitochondrial inner membrane by thin tubules. These new insights are brought to bear on the wealth of data collected by conventional electron microscopic analysis.

Solution structure of microcin J25, the single macrocyclic antimicrobial peptide from Escherichia coli

The three-dimensional solution structure of microcin J25, the single cyclic representative of the microcin antimicrobial peptide class produced by enteric bacteria, was determined using two-dimensional 1H NMR spectroscopy and molecular modeling. This hydrophobic 21-residue peptide exhibits potent activity directed to Gram-negative bacteria. Its primary structure, cyclo(-V1GIGTPISFY10GGGAGHVPEY20F-), has been determined previously [Blond, A., Péduzzi, J., Goulard, C., Chiuchiolo, M. J., Barthélémy, M., Prigent, Y., Salomón, R.A., Farías, R.N., Moreno, F. & Rebuffat, S. (1999) Eur. J. Biochem., 259, 747-755]. Conformational parameters (3JNHCalphaH coupling constants, quantitative nuclear Overhauser enhancement data, chemical shift deviations, temperature coefficients of amide protons, NH-ND exchange rates) were obtained in methanol solution. Structural restraints consisting of 190 interproton distances inferred from NOE data, 11 phi backbone dihedral angle and 9 chi1 angle restraints derived from the coupling constants and three hydrogen bonds in agreement with the amide exchange rates were used as input for simulated annealing calculations and energy minimization in the program XPLOR. Microcin J25 adopts a well-defined compact structure consisting of a distorted antiparallel beta sheet, which is twisted and folded back on itself, thus resulting in three loops. Residues 7-10 and 17-20 form the more regular part of the beta sheet. The region encompassing residues Gly11-His16 consists of a distorted beta hairpin, which divides into two small loops and is stabilized by an inverse gamma turn and a type I' beta turn. The reversal of the chain leading to the Phe21-Pro6 loop results from a mixed beta/gamma turn. A cavity, in which the hydrophilic Ser8 side-chain is confined, is delimited by two crab pincer-like regions that comprise residues 6-8 and 18-1.

A ComGA-dependent checkpoint limits growth during the escape from competence

In Bacillus subtilis, competence for transformation develops in 5-10% of the cells in a stationary phase culture. These cells exhibit a prolonged lag in the resumption of growth and cell division during the escape from competence. To better understand the basis of this lag, we have characterized competent cultures microscopically. To distinguish the minority of competent cells, a translational fusion between ComK, the competence transcription factor, and the green fluorescent protein (GFP) was used as a marker. Only 5-10% of the cells in a competent culture were fluorescent, indicating that ComK synthesis is an all or nothing event. To validate the identification of competent cells, we demonstrated the coincident expression of comEA, a late competence gene, and comK-gfp. Competent cells resemble stationary phase cells; the majority are single (not in chains), contain single nucleoids, and rarely contain FtsZ rings. Upon dilution into fresh medium, competent cells maintain this appearance for about 2 h. In contrast, the majority of non-competent cells rapidly resume growth, exhibiting chaining, nuclear division and FtsZ-ring formation. The late competence protein ComGA is required for the competence-related block in chromosome replication and cell division. In the competent cells of a comGA mutant culture, chromosomal replication and FtsZ-ring formation were no longer blocked, although competent comGA mutant cells were abnormal in appearance. It is likely that one role for ComGA is to prevent growth, chromosome replication and cell division until ComK can be eliminated by degradation. A mutation in the ATP-binding site of comGA inactivated the protein for transformation but did not prevent it from inhibiting DNA replication and cell division. The buoyant density difference between competent and non-competent cells depends on the competence-specific growth arrest.

A set of ftsZ mutants blocked at different stages of cell division in Caulobacter

FtsZ is required throughout the cell division process in eubacteria and in archaea. We report the isolation of novel mutants of the FtsZ gene in Caulobacter crescentus. Clusters of charged amino acids were changed to alanine to minimize mutations that affect protein folding. Molecular modelling indicated that all the clustered-charged-to-alanine mutations had altered amino acids at the surface of the protein. Of 13 such mutants, four were recessive-lethal, three were dominant-lethal, and six had no discernible phenotype. An FtsZ depletion strain of Caulobacter was constructed to analyse the phenotype of the recessive-lethal mutations and used to show that they blocked cell division at distinct stages. One mutation blocked the initiation of cell division, two mutations blocked cell division randomly, and one mutation blocked both early and late stages of cell division. The effect of the recessive mutations on the subcellular localization of FtsZ was determined. Models to explain the various mutant phenotypes are discussed. This is the first set of recessive alleles of ftsZ blocked at different stages of cell division.

Cytological and biochemical characterization of the FtsA cell division protein of Bacillus subtilis

The actin-like protein FtsA is present in many eubacteria, and genetic experiments have shown that it plays an important, sometimes essential, role in cell division. Here, we show that Bacillus subtilis FtsA is targeted to division sites in both vegetative and sporulating cells. As in other organisms FtsA is probably recruited immediately after FtsZ. In sporulating cells of B. subtilis FtsZ is recruited to potential division sites at both poles of the cell, but asymmetric division occurs at only one pole. We have now found that FtsA is recruited to only one cell pole, suggesting that it may play an important role in the generation of asymmetry in this system. FtsA is present in much higher quantities in B. subtilis than in Escherichia coli, with approximately one molecule of FtsA for five of FtsZ. This means that there is sufficient FtsA to form a complete circumferential ring at the division site. Therefore, FtsA may have a direct structural role in cell division. We have purified FtsA and shown that it behaves as a dimer and that it has both ATP-binding and ATP-hydrolysis activities. This suggests that ATP hydrolysis by FtsA is required, together with GTP hydrolysis by FtsZ, for cell division in B. subtilis (and possibly in most eubacteria).

Control of cell shape in bacteria: helical, actin-like filaments in Bacillus subtilis

In the absence of an overt cytoskeleton, the external cell wall of bacteria has traditionally been assumed to be the primary determinant of cell shape. In the Gram-positive bacterium Bacillus subtilis, two related genes, mreB and mbl, were shown to be required for different aspects of cell morphogenesis. Subcellular localization of the MreB and Mbl proteins revealed that each forms a distinct kind of filamentous helical structure lying close to the cell surface. The distribution of the proteins in different species of bacteria, and the similarity of their sequence to eukaryotic actins, suggest that the MreB-like proteins have a cytoskeletal, actin-like role in bacterial cell morphogenesis.

Direct observation of the enhancement of noncooperative protein self-assembly by macromolecular crowding: indefinite linear self-association of bacterial cell division protein FtsZ

Recent measurements of sedimentation equilibrium and sedimentation velocity have shown that the bacterial cell division protein FtsZ self-associates to form indefinitely long rod-like linear aggregates in the presence of GDP and Mg(2+). In the present study, the newly developed technique of non-ideal tracer sedimentation equilibrium was used to measure the effect of high concentrations-up to 150 g/liter-of each of two inert "crowder" proteins, cyanmethemoglobin or BSA, on the thermodynamic activity and state of association of dilute FtsZ under conditions inhibiting (-Mg(2+)) and promoting (+Mg(2+)) FtsZ self-association. Analysis of equilibrium gradients of both FtsZ and crowder proteins indicates that, under the conditions of the present experiment, FtsZ interacts with each of the two crowder proteins essentially entirely via steric repulsion, which may be accounted for quantitatively by a simple model in which hemoglobin, albumin, and monomeric FtsZ are modeled as effective spherical hard particles, and each oligomeric species of FtsZ is modeled as an effective hard spherocylinder. The functional dependence of the sedimentation of FtsZ on the concentrations of FtsZ and either crowder indicates that, in the presence of high concentrations of crowder, both the weight-average degree of FtsZ self-association and the range of FtsZ oligomer sizes present in significant abundance are increased substantially.

Crystal structure of the bacterial cell division regulator MinD

In bacterial cell division MinD plays a pivotal role, selecting the mid-cell over other sites. With MinC, MinD forms a non-specific inhibitor of division, that interacts with FtsZ. Specificity is provided by MinD's interaction with MinE at the mid-cell. We have solved the crystal structure of MinD-1 from Archaeoglobus fulgidus to 2.6 A by multiple anomalous dispersion. MinD is a classic nucleotide binding protein, related to nitrogenase iron proteins, which have a fold of a seven-stranded parallel beta-sheet, surrounded by alpha-helices. Although MinD, unlike the proteins it interacts with and those it is structurally related to, is a monomer, not a dimer.

Cell cycle and positional constraints on FtsZ localization and the initiation of cell division in Caulobacter crescentus

Swarmer cells of Caulobacter crescentus are devoid of the cell division initiation protein FtsZ and do not replicate DNA. FtsZ is synthesized during the differentiation of swarmer cells into replicating stalked cells. We show that FtsZ first localizes at the incipient stalked pole in differentiating swarmer cells. FtsZ subsequently localizes at the mid-cell early in the cell cycle. In an effort to understand whether Z-ring formation and cell constriction are driven solely by the cell cycle-regulated increase in FtsZ concentration, FtsZ was artificially expressed in swarmer cells at a level equivalent to that found in predivisional cells. Immunofluorescence microscopy showed that, in these swarmer cells, simply increasing FtsZ concentration was not sufficient for Z-ring formation; Z-ring formation took place only in stalked cells. Expression of FtsZ in swarmer cells did not alter the timing of cell constriction initiation during the cell cycle but, instead, caused additional constrictions and a delay in cell separation. These additional constrictions were confined to sites close to the original mid-cell constriction. These results suggest that the timing and placement of Z-rings is tightly coupled to an early cell cycle event and that cell constriction is not solely dependent on a threshold level of FtsZ.

The FtsZ protofilament and attachment of ZipA--structural constraints on the FtsZ power stroke

Bacterial cell division protein FtsZ forms protofilaments in vitro that can shift from a straight to a curved conformation. The inside of the curved protofilaments, which corresponds to the carboxyl terminus, should face the center of the cell as curvature increases during constriction of the Z-ring. ZipA, a membrane-tethered division protein, binds to a highly conserved short peptide on the carboxyl terminus of FtsZ. A model is proposed here for how membrane-bound ZipA can reach around the FtsZ protofilament to bind the carboxy-terminal peptide, which faces away from the membrane.

Influence of the nucleoid on placement of FtsZ and MinE rings in Escherichia coli

We previously presented evidence that replicating but unsegregated nucleoids, along with the Min system, act as topological inhibitors to restrict assembly of the FtsZ ring (Z ring) to discrete sites in the cell. To test if nonreplicating nucleoids have similar exclusion effects, we examined Z rings in dnaA (temperature sensitive) mutants. Z rings were excluded from centrally localized nucleoids and were often observed at nucleoid edges. Cells with nonreplicating nucleoids formed filaments, some of which contained large nucleoid-free areas in which Z rings were positioned at regular intervals. Because MinE may protect FtsZ from the action of the MinC inhibitor in these nucleoid-free zones, we examined the localization of a MinE-green fluorescent protein (GFP) fusion with respect to Z rings and nucleoids. Like Z rings, MinE-GFP appeared to localize independently of nucleoid position, forming rings at regular intervals in nucleoid-free regions. Unlike FtsZ, however, MinE-GFP often localized on top of nucleoids, replicating or not, suggesting that MinE is relatively insensitive to the nucleoid inhibition effect. These data suggest that both replicating and nonreplicating nucleoids are capable of topologically excluding Z rings but not MinE.

The MinE ring required for proper placement of the division site is a mobile structure that changes its cellular location during the Escherichia coli division cycle

Placement of the division site at midcell in Escherichia coli requires the MinE protein. MinE acts by imparting topological specificity to the MinCD division inhibitor, preventing the inhibitor from acting at the midcell site while permitting it to block division at other unwanted sites along the length of the cell. It was previously shown that MinE assembled into a ring structure that appeared to be localized near midcell, apparently explaining the ability of MinE to specifically counteract MinCD at midcell. We report here that the MinE ring is not fixed in position near midcell but is a dynamic structure that undergoes a repetitive cycle of movement first to one cell pole and then to the opposite pole. Taken together with studies of the dynamic behavior of the MinD protein, the results suggest that the topological specificity of division site placement may not involve a localized action of MinE to counteract the MinCD division inhibitor at midcell but rather the ability of MinE to move the division inhibitor away from midcell and to the cell poles.

The MinE ring required for proper placement of the division site is a mobile structure that changes its cellular location during the Escherichia coli division cycle

Placement of the division site at midcell in Escherichia coli requires the MinE protein. MinE acts by imparting topological specificity to the MinCD division inhibitor, preventing the inhibitor from acting at the midcell site while permitting it to block division at other unwanted sites along the length of the cell. It was previously shown that MinE assembled into a ring structure that appeared to be localized near midcell, apparently explaining the ability of MinE to specifically counteract MinCD at midcell. We report here that the MinE ring is not fixed in position near midcell but is a dynamic structure that undergoes a repetitive cycle of movement first to one cell pole and then to the opposite pole. Taken together with studies of the dynamic behavior of the MinD protein, the results suggest that the topological specificity of division site placement may not involve a localized action of MinE to counteract the MinCD division inhibitor at midcell but rather the ability of MinE to move the division inhibitor away from midcell and to the cell poles.

Deletion of the cell-division inhibitor MinC results in lysis of Neisseria gonorrhoeae

The minCDE genes involved in division site selection in Neisseria gonorrhoeae were identified using raw data from the N. gonorrhoeae genome project and are part of a cluster of 27 genes. When gonococcal min genes were heterologously expressed as a cluster in Escherichia coli, minicells and filaments were produced, indicating that gonococcal min genes disrupted cell division in other genera. The insertional inactivation of the minC gene of N. gonorrhoeae CH811 resulted in a strain (CSRC1) with decreased viability and grossly abnormal cell division as observed by phase-contrast and electron microscopy analysis. Western blot analysis of N. gonorrhoeae CSRC1 confirmed that MinC(Ng) was not produced. Complementation of CSRC1 by integrating a minC-6xHis tag fusion at the proAB locus by homologous recombination restored viability and 1.9 times wild-type levels of MinC(Ng) expression. This slight increase of expression caused a small percentage of the complemented cells to divide aberrantly. This suggested that the 6xHis tag has partially affected the stability of MinC, or that the chromosomal position of minC is critical to its regulation. Comparison of MinC proteins from different bacteria showed a homologous region corresponding to residues 135-230 with five conserved amino acids. Overexpression of MinC(Ng) in wild-type E. coli cells induced filamentation and an E. coli minC mutant was successfully complemented with minC(Ng). Therefore, the evidence indicates that MinC from N. gonorrhoeae acts as a cell-division inhibitor and that its role is essential in maintaining proper division in cocci.

FtsZ rings in mukB mutants with or without the Min system

The site of cell division in Escherichia coli is defined by formation of the Z ring between the two segregated daughter nucleoids. Positioning of the Z ring, composed of the highly conserved and tubulin-like FtsZ protein, appears to be negatively regulated by both the nucleoid and the oscillating MinCD inhibitor proteins. MukB protein is probably involved in nucleoid condensation, and in the absence of MukB, the negative effect of the nucleoid on Z rings appears to be partially suppressed. In this study, we examined the localization of Z rings in cells lacking both the Min system and MukB. In the Deltamin DeltamukB double null mutant, essentially all nucleoid-free zones, either at the cell poles or at non-polar sites between nucleoids, contained Z rings. However, a significant proportion of Z rings also formed on top of nucleoids. Interestingly, Z ring clusters often formed at gaps between nucleoids, and some of the rings within the clusters were clearly positioned on top of nucleoids. These results provide further evidence that the negative topological effect of nucleoids in cells lacking MukB is partially but not totally suppressed, and that the absence of the Min system allows more promiscuous Z ring formation.

The plastid of Toxoplasma gondii is divided by association with the centrosomes

Apicomplexan parasites harbor a single nonphotosynthetic plastid, the apicoplast, which is essential for parasite survival. Exploiting Toxoplasma gondii as an accessible system for cell biological analysis and molecular genetic manipulation, we have studied how these parasites ensure that the plastid and its 35-kb circular genome are faithfully segregated during cell division. Parasite organelles were labeled by recombinant expression of fluorescent proteins targeted to the plastid and the nucleus, and time-lapse video microscopy was used to image labeled organelles throughout the cell cycle. Apicoplast division is tightly associated with nuclear and cell division and is characterized by an elongated, dumbbell-shaped intermediate. The plastid genome is divided early in this process, associating with the ends of the elongated organelle. A centrin-specific antibody demonstrates that the ends of dividing apicoplast are closely linked to the centrosomes. Treatment with dinitroaniline herbicides (which disrupt microtubule organization) leads to the formation of multiple spindles and large reticulate plastids studded with centrosomes. The mitotic spindle and the pellicle of the forming daughter cells appear to generate the force required for apicoplast division in Toxoplasma gondii. These observations are discussed in the context of autonomous and FtsZ-dependent division of plastids in plants and algae.

Structural and topological differences between a glycopeptide-intermediate clinical strain and glycopeptide-susceptible strains of Staphylococcus aureus revealed by atomic force microscopy

Novel cell surface topography was revealed on cocci from a glycopeptide-intermediate Staphylococcus aureus (GISA) clinical strain by using atomic force microscopy. The GISA isolate and its revertant had two parallel circumferential surface rings. One equatorial surface ring was observed in control strains. In vancomycin-susceptible strains, additional rings were formed in the presence of vancomycin. Ring depth measurements also revealed striking differences between the GISA strain and susceptible strains grown with or without vancomycin.

Chloroplast division and morphology are differentially affected by overexpression of FtsZ1 and FtsZ2 genes in Arabidopsis

In higher plants, two nuclear gene families, FtsZ1 and FtsZ2, encode homologs of the bacterial protein FtsZ, a key component of the prokaryotic cell division machinery. We previously demonstrated that members of both gene families are essential for plastid division, but are functionally distinct. To further explore differences between FtsZ1 and FtsZ2 proteins we investigated the phenotypes of transgenic plants overexpressing AtFtsZ1-1 or AtFtsZ2-1, Arabidopsis members of the FtsZ1 and FtsZ2 families, respectively. Increasing the level of AtFtsZ1-1 protein as little as 3-fold inhibited chloroplast division. Plants with the most severe plastid division defects had 13- to 26-fold increases in AtFtsZ1-1 levels over wild type, and some of these also exhibited a novel chloroplast morphology. Quantitative immunoblotting revealed a correlation between the degree of plastid division inhibition and the extent to which the AtFtsZ1-1 protein level was elevated. In contrast, expression of an AtFtsZ2-1 sense transgene had no obvious effect on plastid division or morphology, though AtFtsZ2-1 protein levels were elevated only slightly over wild-type levels. This may indicate that AtFtsZ2-1 accumulation is more tightly regulated than that of AtFtsZ1-1. Plants expressing the AtFtsZ2-1 transgene did accumulate a form of the protein smaller than those detected in wild-type plants. AtFtsZ2-1 levels were unaffected by increased or decreased accumulation of AtFtsZ1-1 and vice versa, suggesting that the levels of these two plastid division proteins are regulated independently. Taken together, our results provide additional evidence for the functional divergence of the FtsZ1 and FtsZ2 plant gene families.

Visualization of a cytoskeleton-like FtsZ network in chloroplasts

It has been a long-standing dogma in life sciences that only eukaryotic organisms possess a cytoskeleton. Recently, this belief was questioned by the finding that the bacterial cell division protein FtsZ resembles tubulin in sequence and structure and, thus, may be the progenitor of this major eukaryotic cytoskeletal element. Here, we report two nuclear-encoded plant ftsZ genes which are highly conserved in coding sequence and intron structure. Both their encoded proteins are imported into plastids and there, like in bacteria, they act on the division process in a dose-dependent manner. Whereas in bacteria FtsZ only transiently polymerizes to a ring-like structure, in chloroplasts we identified persistent, highly organized filamentous scaffolds that are most likely involved in the maintenance of plastid integrity and in plastid division. As these networks resemble the eukaryotic cytoskeleton in form and function, we suggest the term "plastoskeleton" for this newly described subcellular structure.

Generation of a non-sporulating strain of Streptomyces coelicolor A3(2) by the manipulation of a developmentally controlled ftsZ promoter

The differentiation of Streptomyces aerial hyphae into chains of unigenomic spores occurs through the synchronous formation of multiple FtsZ rings, leading to sporulation septa. We show here that developmental control of ftsZ transcription is required for sporulation in Streptomyces coelicolor A3(2). Three putative ftsZ promoters were detected in the ftsQ-ftsZ intergenic region. In addition, some readthrough from upstream promoter(s) contributed to ftsZ transcription. S1 nuclease protection assays and transcriptional fusions of the ftsZ promoter region to the egfp gene (for green fluorescent protein) provided evidence that ftsZ2p is a developmentally controlled promoter that is specifically upregulated in sporulating aerial hyphae. This upregulation required all the six early regulatory sporulation genes that were tested: whiA, B, G, H, I and J. The DNA sequence of the promoter indicated that it is not part of the developmental regulon that is controlled by the RNA polymerase sigma factor sigma(WhiG). A strain in which the ftsZ2p promoter was inactivated grew normally during vegetative growth and formed aerial mycelium, but was deficient in sporulation septation. Thus, ftsZ2p was dispensable for vegetative growth, but was required for the strain to make sufficient FtsZ to support developmentally controlled multiple cell divisions in aerial hyphae.

Crystal structure of the cell division protein FtsA from Thermotoga maritima

Bacterial cell division requires formation of a septal ring. A key step in septum formation is polymerization of FtsZ. FtsA directly interacts with FtsZ and probably targets other proteins to the septum. We have solved the crystal structure of FtsA from Thermotoga maritima in the apo and ATP-bound form. FtsA consists of two domains with the nucleotide-binding site in the interdomain cleft. Both domains have a common core that is also found in the actin family of proteins. Structurally, FtsA is most homologous to actin and heat-shock cognate protein (Hsc70). An important difference between FtsA and the actin family of proteins is the insertion of a subdomain in FtsA. Movement of this subdomain partially encloses a groove, which could bind the C-terminus of FtsZ. FtsZ is the bacterial homologue of tubulin, and the FtsZ ring is functionally similar to the contractile ring in dividing eukaryotic cells. Elucidation of the crystal structure of FtsA shows that another bacterial protein involved in cytokinesis is structurally related to a eukaryotic cytoskeletal protein involved in cytokinesis.

Dnm1p GTPase-mediated mitochondrial fission is a multi-step process requiring the novel integral membrane component Fis1p

Yeast Dnm1p is a soluble, dynamin-related GTPase that assembles on the outer mitochondrial membrane at sites where organelle division occurs. Although these Dnm1p-containing complexes are thought to trigger constriction and fission, little is known about their composition and assembly, and molecules required for their membrane recruitment have not been isolated. Using a genetic approach, we identified two new genes in the fission pathway, FIS1 and FIS2. FIS1 encodes a novel, outer mitochondrial membrane protein with its amino terminus exposed to the cytoplasm. Fis1p is the first integral membrane protein shown to participate in a eukaryotic membrane fission event. In a related study (Tieu, Q., and J. Nunnari. 2000. J. Cell Biol. 151:353-365), it was shown that the FIS2 gene product (called Mdv1p) colocalizes with Dnm1p on mitochondria. Genetic and morphological evidence indicate that Fis1p, but not Mdv1p, function is required for the proper assembly and distribution of Dnm1p-containing fission complexes on mitochondrial tubules. We propose that mitochondrial fission in yeast is a multi-step process, and that membrane-bound Fis1p is required for the proper assembly, membrane distribution, and function of Dnm1p-containing complexes during fission.

Analysis of the essential cell division gene ftsL of Bacillus subtilis by mutagenesis and heterologous complementation

The ftsL gene is required for the initiation of cell division in a broad range of bacteria. Bacillus subtilis ftsL encodes a 13-kDa protein with a membrane-spanning domain near its N terminus. The external C-terminal domain has features of an alpha-helical leucine zipper, which is likely to be involved in the heterodimerization with another division protein, DivIC. To determine what residues are important for FtsL function, we used both random and site-directed mutagenesis. Unexpectedly, all chemically induced mutations fell into two clear classes, those either weakening the ribosome-binding site or producing a stop codon. It appears that the random mutagenesis was efficient, so many missense mutations must have been generated but with no phenotypic effect. Substitutions affecting hydrophobic residues in the putative coiled-coil domain, introduced by site-directed mutagenesis, also gave no observable phenotype except for insertion of a helix-breaking proline residue, which destroyed FtsL function. ftsL homologues cloned from three diverse Bacillus species, Bacillus licheniformis, Bacillus badius, and Bacillus circulans, could complement an ftsL null mutation in B. subtilis, even though up to 66% of the amino acid residues of the predicted proteins were different from B. subtilis FtsL. However, the ftsL gene from Staphylococcus aureus (whose product has 73% of its amino acids different from those of the B. subtilis ftsL product) was not functional. We conclude that FtsL is a highly malleable protein that can accommodate a large number of sequence changes without loss of function.

The phylogeny of proteobacteria: relationships to other eubacterial phyla and eukaryotes

The evolutionary relationships of proteobacteria, which comprise the largest and phenotypically most diverse division among prokaryotes, are examined based on the analyses of available molecular sequence data. Sequence alignments of different proteins have led to the identification of numerous conserved inserts and deletions (referred to as signature sequences), which either are unique characteristics of various proteobacterial species or are shared by only members from certain subdivisions of proteobacteria. These signature sequences provide molecular means to define the proteobacterial phyla and their various subdivisions and to understand their evolutionary relationships to the other groups of eubacteria as well as the eukaryotes. Based on signature sequences that are present in different proteins it is now possible to infer that the various eubacterial phyla evolved from a common ancestor in the following order: low-G+C Gram-positive-->high-G+C Gram-positive-->Deinococcus-Thermus (green nonsulfur bacteria)-->cyanobacteria-->Spirochetes-->Chlamydia-Cytophaga-Aquifex -green sulfur bacteria-->Proteobacteria-1 (epsilon and delta)-->Proteobacteria-2 (alpha)-->Proteobacteria-3 (beta)-->Proteobacteria-4 (gamma). An unexpected but important aspect of the relationship deduced here is that the main eubacterial phyla are related to each other linearly rather than in a tree-like manner, suggesting that the major evolutionary changes within Bacteria have taken place in a directional manner. The identified signatures permit placement of prokaryotes into different groups/divisions and could be used for determinative purposes. These signatures generally support the origin of mitochondria from an alpha-proteobacterium and provide evidence that the nuclear cytosolic homologs of many genes are also derived from proteobacteria.