Thermodynamic basis of the enhanced specificity of structured DNA probes

Rapid, high-throughput, multiplex, real-time PCR for identification of mutations in the cyp51A gene of Aspergillus fumigatus that confer resistance to itraconazole

Aspergillus fumigatus is an important cause of life-threatening invasive fungal disease in patients with compromised immune systems. Resistance to itraconazole in A. fumigatus is closely linked to amino acid substitutions in Cyp51A that replace Gly54. In an effort to develop a new class of molecular diagnostic assay that can rapidly assess drug resistance, a multiplexed assay was established. This assay uses molecular beacons corresponding to the wild-type cyp51A gene and seven mutant alleles encoding either Arg54, Lys54, Val54, Trp54, or Glu54. Molecular beacon structure design and real-time PCR conditions were optimized to increase the assay specificity. The multiplex assay was applied to the analysis of chromosomal DNA samples from a collection of 48 A. fumigatus clinical and laboratory-derived isolates, most with reduced susceptibility to itraconazole. The cyp51A allelic identities for codon 54 were established for all of the strains tested, and mutations altering Gly54 in 23 strains were revealed. These mutations included G(54)W (n = 1), G(54)E (n = 12), G(54)K (n = 3), G(54)R (n = 3), and G(54)V (n = 4). Molecular beacon assay results were confirmed by DNA sequencing. Multiplex real-time PCR with molecular beacons is a powerful technique for allele differentiation and analysis of resistance mutations that is dynamic and suitable for rapid high-throughput assessment of drug resistance.

Model for DNA hairpin denaturation

We investigate the thermal denaturation of DNA hairpins using molecular dynamics simulations of a simple model describing the molecule at a scale of a nucleotide. The model allows us to analyze the different interacting features that determine how an hairpin opens, such as therole of the loop and the properties intrinsic to the stem.

Molecular-beacon-based array for sensitive DNA analysis

Molecular beacon (MB) DNA probes provide a new way for sensitive label-free DNA/protein detection in homogeneous solution and biosensor development. However, a relatively low fluorescence enhancement after the hybridization of the surface-immobilized MB hinders its effective biotechnological applications. We have designed new molecular beacon probes to enable a larger separation between the surface and the surface-bound MBs. Using these MB probes, we have developed a DNA array on avidin-coated cover slips and have improved analytical sensitivity. A home-built wide-field optical setup was used for imaging the array. Our results show that linker length, pH, and ionic strength have obvious effects on the performance of the surface-bound MBs. The fluorescence enhancement of the new MBs after hybridization has been increased from 2 to 5.5. The MB-based DNA array could be used for DNA detection with high sensitivity, enabling simultaneous multiple-target bioanalysis in a variety of biotechnological applications.

Locked TASC probes for homogeneous sensing of nucleic acids and imaging of fixed E. coli cells

We have designed a second-generation TASC (target-assisted self-cleavage) probe. It is based on the switching-on of incorporated cis-acting DNAzyme activity upon the target-induced conformational change of the otherwise inactive off-target probes locked in an intrastrand base-paired hairpin geometry. With E. coli 16S ribosomal RNA-relevant oligonucleotides as targets, the locked TASC probe exhibits an allosteric factor of k(on)/k(off) = 65 and the sequence selectivity is high, in terms of single nucleotide difference, when particular sequence and length of targets are chosen. Preliminary experiments with fixed E. coli cells show that the locked TASC probe with a FRET pair can be used to image fixed E. coli cells.

Comparative quantification of nucleic acids using single-molecule detection and molecular beacons

This paper reports a highly sensitive homogenous method for comparative quantification of nucleic acids based on single-molecule detection (SMD) and molecular beacons (MBs). Two different color MBs were used to perform a separation-free comparative hybridization assay for simultaneous quantification of both target and control strands. A fluorescent burst, emitted from a single hybrid when it passes through a minuscule laser-focused region, is detected with high signal-to-noise ratio (SNR) by using single-molecule fluorescence spectroscopy. Targets are quantified via counting of discrete fluorescent bursts. The high SNR achieved in both detection channels overcame the complications of fluorescent variability usually observed in dual-color ensemble measurements. In comparison with the conventional ensemble methods, this method improved the detection limit by 3 orders of magnitude and reduced the probe consumption by 6 orders of magnitude, facilitating a highly sensitive approach for comparative quantification of nucleic acids and offering great promise for genomic quantification without amplification.

A molecular beacon, bead-based assay for the detection of nucleic acids by flow cytometry

Molecular beacons are dual-labelled probes that are typically used in real-time PCR assays, but have also been conjugated with solid matrices for use in microarrays or biosensors. We have developed a fluid array system using microsphere-conjugated molecular beacons and the flow cytometer for the specific, multiplexed detection of unlabelled nucleic acids in solution. For this array system, molecular beacons were conjugated with microspheres using a biotin-streptavidin linkage. A bridged conjugation method using streptavidin increased the signal-to-noise ratio, allowing for further discrimination of target quantitation. Using beads of different sizes and molecular beacons in two fluorophore colours, synthetic nucleic acid control sequences were specifically detected for three respiratory pathogens, including the SARS coronavirus in proof-of-concept experiments. Considering that routine flow cytometers are able to detect up to four fluorescent channels, this novel assay may allow for the specific multiplex detection of a nucleic acid panel in a single tube.

Fluorescence based strategies for genetic analysis

Synthetic chemistry has been central to the design of modern methods of genetic analysis. In this article, we discuss the underlying chemistry and biophysical principles that have been used in the development of robust methods for the analysis of DNA in the diagnostic laboratory.

Supramolecular assemblies of DNA with neutral nucleoside amphiphiles

A neutral uridine-based amphiphile is described which condenses plasmid DNA. AFM studies show that the three distinct structural components of the amphiphile (i.e, nucleobase, alkyl chains, and poly(ethylene glycol)) are required for the formation of DNA-amphiphile supramolecular assemblies on a mica surface.

Development of a molecular-beacon assay to detect the G1896A precore mutation in hepatitis B virus-infected individuals

The 1896 precore (PC) mutation is the most frequent cause of hepatitis B virus e-antigen (HBeAg)-negative chronic hepatitis B virus (HBV) infection. Detection of the 1896 PC mutation has application in studies monitoring antiviral therapy and the natural history of the disease. Identification of this mutation is usually performed by direct sequencing, which is both costly and laborious. The aim of this study was to develop a rapid, high-throughput assay to detect the 1896 PC mutation using real-time PCR and molecular-beacon technology. The assay was initially standardized on oligonucleotide targets and plasmids containing the wild-type (WT) and PC mutation and then tested on plasma samples from children with HBV DNA of >10(6) copies/ml. Nine individuals were HBeAg negative and suspected to harbor HBeAg mutations, while 12 children were HBeAg positive and selected as controls. Ninety percent (19 of 21) of plasma samples tested with molecular beacons were in complete agreement with sequencing results. The remaining 10% (2 of 21) of samples were identified as heterogeneous mixtures of WT and mutant virus by molecular beacons, though sequencing found only a homogeneous mutant in both cases. Overall, the 1896 PC mutation was detected by this assay in 55.5% of the children with HBeAg-negative infection. In summary, this assay is a rapid, sensitive, and specific technique that effectively discriminates WT from 1896 PC mutant HBV and may be useful in clinical and epidemiological studies.

mRNA expression of AMPA receptors and AMPA receptor binding proteins in the cerebral cortex of elderly schizophrenics

L-alpha-amino-3-hydroxy-5-methyl-4-isoxazole propionic acid (AMPA) receptors (AMPARs) mediate the majority of the fast excitatory transmission in the CNS. To determine whether gene expression of AMPARs and/or AMPAR binding proteins, which control response/sensitivity of AMPAR-bearing neurons to glutamate, are altered in schizophrenia, mRNA expression and abundance of AMPAR subunits (GluR1-4) and several AMPAR binding proteins (SAP97, PICK1, GRIP, ABP) were measured in the dorsolateral prefrontal cortex (DLPFC) and the occipital cortex of elderly schizophrenia patients (n = 36) and matched normal controls (n = 26) by quantitative real-time PCR. The mRNA expression of GluR1, GluR4, and GRIP in the DLPFC and expression of the GluR4, GRIP, and ABP in the occipital cortex were significantly elevated in schizophrenics. GluR1 and ABP mRNA expression in the occipital cortex and GluR2, GluR3, SAP97, and PICK1 expression in either cortical area were not significantly altered. The data also demonstrated significant differences in the abundances of mRNAs encoding GluR1-4 subunits (GluR2 > GluR3 > GluR1 > GluR4) and of AMPAR binding proteins (SAP97 > PICK1 > GRIP > ABP) in both diagnostic groups. GluR2 (58-64%) and GluR3 (24-29%) were the major components of the AMPAR mRNA in both cortical areas, implying that the major AMPAR complexes in the human cortex are probably those containing GluR2 and GluR3 subunits. Small but significant differences in the amounts of GluR2, GluR3, and GRIP mRNAs were detected between the two cortical areas: more GluR3 and GRIP but less GluR2 were detected in the DLPFC than in the occipital cortex.

SNP detection using peptide nucleic acid probes and conjugated polymers: applications in neurodegenerative disease identification

A strategy employing a combination of peptide nucleic acid (PNA) probes, an optically amplifying conjugated polymer (CP), and S1 nuclease enzyme is capable of detecting SNPs in a simple, rapid, and sensitive manner. The recognition is accomplished by sequence-specific hybridization between the uncharged, fluorescein-labeled PNA probe and the DNA sequence of interest. After subsequent treatment with S1 nuclease, the cationic water soluble CP electrostatically associates with the remaining anionic PNA/DNA complex, leading to sensitized emission of the labeled PNA probe via FRET from the CP. The generation of fluorescent signal is controlled by strand-specific electrostatic interactions and is governed by the complementarity of the probe/target pair. To assess the method, we compared the ability of the sensor system to detect normal, wild-type human DNA sequences, and those sequences containing a single base mutation. Specifically, we examined a PNA probe complementary to a region of the gene encoding the microtubule associated protein tau. The probe sequence covers a known point mutation implicated in a dominant neurodegenerative dementia known as frontotemporal dementia with parkinsonism linked to chromosome 17 (FTDP-17), which has clinical and molecular similarities to Alzheimer's disease. By using an appropriate PNA probe, the conjugated polymer poly[(9,9-bis(6'-N,N,N-trimethylammoniumhexylbromide)fluorene)-co-phenylene] and S1 nuclease, unambiguous FRET signaling is achieved for the wild-type DNA and not the mutant sequence harboring the SNP. Distance relationships in the CP/PNA assay are also discussed to highlight constraints and demonstrate improvements within the system.

Rapid detection of isoniazid and rifampin resistance mutations in Mycobacterium tuberculosis complex from cultures or smear-positive sputa by use of molecular beacons

The slow-growing nature of Mycobacterium tuberculosis complex hinders the improvement of turnaround time for phenotypic drug susceptibility testing. We designed a set of molecular beacons for the detection of isoniazid and rifampin resistance mutations in M. tuberculosis complex organisms from cultures or from N-acetyl-l-cysteine-NaOH-treated, smear-positive specimens. The performance of the molecular beacons was characterized by studying a total of 196 clinical isolates (127 drug-resistant isolates and 69 drug-susceptible isolates). For detection of isoniazid resistance, the sensitivity and specificity of the assay were 82.7 and 100%, and the positive predictive value (PPV) and negative predictive value (NPV) at a resistance prevalence of 10% were 100 and 98.11%, respectively. For detection of rifampin resistance, the sensitivity and specificity of the assay were 97.5 and 100%, and the PPV and NPV at a resistance prevalence of 2.0% were 100 and 99.95%, respectively.

Imaging native beta-actin mRNA in motile fibroblasts

Nuclease-resistant, cytoplasmically resident molecular beacons were used to specifically label beta-actin mRNA in living and motile chicken embryonic fibroblasts. beta-actin mRNA signals were most abundant in active lamellipodia, which are protrusions that cells extend to adhere to surfaces. Time-lapse images show that the immediate sources of beta-actin mRNA for nascent lamellipodia are adjacent older protrusions. During the development of this method, we observed that conventional molecular beacons are rapidly sequestered in cell nuclei, leaving little time for them to find and bind to their cytoplasmic mRNA targets. By linking molecular beacons to a protein that tends to stay within the cytoplasm, nuclear sequestration was prevented, enabling cytoplasmic mRNAs to be detected and imaged. Probing beta-actin mRNA with these cytoplasmically resident molecular beacons did not affect the motility of the fibroblasts. Furthermore, mRNAs bound to these probes undergo translation within the cell. The use of cytoplasmically resident molecular beacons will enable further studies of the mechanism of beta-actin mRNA localization, and will be useful for understanding the dynamics of mRNA distribution in other living cells.

Reversibly switchable DNA nanocompartment on surfaces

Biological macromolecules have been used to fabricate many nanostructures, biodevices and biomimetics because of their physical and chemical properties. But dynamic nanostructure and biomachinery that depend on collective behavior of biomolecules have not been demonstrated. Here, we report the design of DNA nanocompartments on surfaces that exhibit reversible changes in molecular mechanical properties. Such molecular nanocompartments are used to encage molecules, switched by the collective effect of Watson-Crick base-pairing interactions. This effect is used to perform molecular recognition. Furthermore, we found that 'fuel' strands with single-base variation cannot afford an efficient closing of nanocompartments, which allows highly sensitive label-free DNA array detection. Our results suggest that DNA nanocompartments can be used as building blocks for complex biomaterials because its core functions are independent of substrates and mediators.

Quick tour of fluorescence correlation spectroscopy from its inception

Fluorescence correlation spectroscopy (FCS) was originally developed in the early 1970s as a way to measure the kinetics of chemical reactions under zero perturbation conditions. At its inception, the measurement was difficult due to experimental limitations and was primarily used during the 1970s and 1980s to characterize diffusion. More recently, as a result of technological advances, FCS measurements have become easier and more versatile. In addition to measurements of diffusion both in solution and in cells, FCS is now also used to measure not only chemical reaction kinetics but also extents of molecular aggregation, the dynamics of photophysical processes, conformational fluctuations, molecular interactions in solution and in cells, and has even found application as a pharmaceutical screening method. From its inception to the present, the contributions of Webb and his coworkers have had a central and defining role in the development and applications of FCS.

DNA-Functionalized Nanotube Membranes with Single-Base Mismatch Selectivity

We describe synthetic membranes in which the molecular recognition chemistry used to accomplish selective permeation is DNA hybridization. These membranes contain template-synthesized gold nanotubes with inside diameters of 12 nanometers, and a "transporter" DNA-hairpin molecule is attached to the inside walls of these nanotubes. These DNA-functionalized nanotube membranes selectively recognize and transport the DNA strand that is complementary to the transporter strand, relative to DNA strands that are not complementary to the transporter. Under optimal conditions, single-base mismatch transport selectivity can be obtained.

Quadruplex to Watson-Crick duplex transition of the thrombin binding aptamer: a fluorescence resonance energy transfer study

Thermodynamic parameters of closing up of guanine-rich thrombin binding element, upon binding to K(+) and Na(+) ions to form quadruplexes and opening up of these quadruplexes upon binding to its complementary strand, were investigated. For this purpose, 15mer deoxynucleotide, d(G(2)T(2)G(2)TGTG(2)T(2)G(2)), labeled with 5'-fluorescein and 3'-tetramethylrhodamine was taken and fluorescence resonance energy transfer was monitored as a function of either metal ions or complementary strand concentrations. Equilibrium association constant obtained from FRET studies demonstrates that K(+) ions bind with higher affinity than the Na(+) ions. The enthalpy changes, DeltaH, obtained from temperature dependence of equilibrium association constant studies revealed that formation of quadruplex upon binding of metal ions is primarily enthalpy driven. Binding studies of complementary strand to the quadruplex suggest that opening of a quadruplex in NaCl buffer in presence of the complementary strand is enthalpic as well as entropic driven and can occur easily, whereas opening of the same quadruplex in KCl buffer suffers from enthalpic barrier. Comparison of overall thermodynamic parameters along with kinetics studies indicates that, although quadruplexes cannot efficiently compete with duplex formation at physiological pH, they delay the association of two strands.

Optimization of a 3'-minor groove binder-DNA probe targeting the uidA gene for rapid identification of Escherichia coli O157:H7 using real-time PCR

Enterohemorrhagic Escherichia coli are harmful human pathogens capable of causing bloody diarrhea and vomiting. An important serotype commonly associated with human illness is the E. coli O157:H7 serotype. Unlike other real-time polymerase chain reaction (PCR) methods for identifying E. coli O157:H7, this study describes the development and optimization of a real-time PCR method targeting a conserved point mutation at +93 in the uidA (gusA) gene that is unique to O157:H7, distinguishing it from non-O157:H7 serotypes. A TET-labeled Minor Groove Binder (MGB) DNA probe was designed for use in a 5' nuclease PCR assay. Using a panel of two E. coli O157:H7 strains, three E. coli non-O157:H7 strains, and one non-E. coli species, the assay was optimized for the specific detection of the E. coli O157:H7 strains. Optimal conditions were identified at high anneal/extend temperatures, low magnesium concentrations, and low probe concentrations, resulting in correct identification of E. coli O157:H7 and non-O157:H7 strains. The improved specificity of MGB probes for single base pair mismatches such as the +93 uidA mutation provides a novel approach towards rapid identification of E. coli O157:H7.

The Thermodynamics of DNA Structural Motifs

DNA secondary structure plays an important role in biology, genotyping diagnostics, a variety of molecular biology techniques, in vitro-selected DNA catalysts, nanotechnology, and DNA-based computing. Accurate prediction of DNA secondary structure and hybridization using dynamic programming algorithms requires a database of thermodynamic parameters for several motifs including Watson-Crick base pairs, internal mismatches, terminal mismatches, terminal dangling ends, hairpins, bulges, internal loops, and multibranched loops. To make the database useful for predictions under a variety of salt conditions, empirical equations for monovalent and magnesium dependence of thermodynamics have been developed. Bimolecular hybridization is often inhibited by competing unimolecular folding of a target or probe DNA. Powerful numerical methods have been developed to solve multistate-coupled equilibria in bimolecular and higher-order complexes. This review presents the current parameter set available for making accurate DNA structure predictions and also points to future directions for improvement.

Clamping down on weak terminal base pairs: oligonucleotides with molecular caps as fidelity-enhancing elements at the 5'- and 3'-terminal residues

The base-pairing fidelity of oligonucleotides depends on the identity of the nucleobases involved and the position of matched or mismatched base pairs in the duplex. Nucleobases forming weak base pairs, as well as a terminal position favor mispairing. We have searched for 5'-appended acylamido caps that enhance the stability and base-pairing fidelity of oligonucleotides with a 5'-terminal 2'-deoxyadenosine residue using combinatorial synthesis and MALDI-monitored nuclease selections. This provided the residue of 4-(pyren-1-yl)butyric acid as a lead. Lead optimization gave (S)-N-(pyren-1-ylmethyl)pyrrolidine-3-phosphate as a cap that increases duplex stability and base-pairing fidelity. For the duplex of 5'-AGGTTGAC-3' with its fully complementary target, this cap gives an increase in the UV melting point T(m) of +10.9 degrees C. The T(m) is 6.3-8.3 degrees C lower when a mismatched nucleobase faces the 5'-terminal dA residue. The optimized cap can be introduced via automated DNA synthesis. It was combined with an anthraquinone carboxylic acid residue as a cap for the 3'-terminal residue. A doubly capped dodecamer thus prepared gives a melting point decrease for double-terminal mismatches that is 5.7-5.9 degrees C greater than that for the unmodified control duplex.

Two sides of the coin: affinity and specificity of nucleic acid interactions

During the past decade, synthetic nucleobase oligomers have found wide use in biochemical sciences, biotechnology and molecular medicine, both as research and/or diagnostic tools and as therapeutics. Numerous applications of common and modified oligonucleotides and oligonucleotide mimics rely on their ability to sequence-specifically recognize nucleic acid targets (DNA or RNA) by forming duplexes or triplexes. In general, these applications would benefit significantly from enhanced binding affinities of nucleobase oligomers in the formation of various secondary structures. However, for high-affinity probes, the selectivity of sequence recognition must also be improved to avoid undesirable associations with mismatched DNA and RNA sites. Here, we review recent progress in understanding the molecular mechanisms of nucleic acid interactions and the development of new high-affinity plus high-specificity oligonucleotides and their mimics, with particular emphasis on peptide nucleic acids.

Hairpin primers for simplified single-nucleotide polymorphism analysis of Mycobacterium tuberculosis and other organisms

We describe a novel, simple, rapid, and highly sensitive method to detect single-nucleotide polymorphisms (SNPs) in Mycobacterium tuberculosis and other organisms. Amplification refractory mutation (ARMS) SNP assays were modified by converting the SNP-detecting linear primers in the ARMS assay to hairpin-shaped primers (HPs) through the addition of a 5' tail complementary to the 3' end of the linear primer. The improved ability of these primers to detect SNPs in M. tuberculosis was compared in a real-time PCR with SYBR-I green dye. Linear primers resulted in incorrect or indeterminate allele designation for 6 of the 13 SNP alleles tested in seven different SNP assays, while HPs determined the correct SNP in all cases. We compared the cycle threshold differences (DeltaC(t)) between the reactions containing primer-template matches and the reactions containing primer-template mismatches (where a larger DeltaC(t) indicates a more robust assay). The use of HPs dramatically improved the mean DeltaC(t) values for the SNP assays (7.6 for linear primers and 11.2 for HPs). We designed 98 different HP assays for SNPs previously associated with resistance to the antibiotic isoniazid to test the large-scale utility of the HP approach. Assay design was successful in 72.4%, 83.7%, 88.8%, and 92.9% of the assays after one to four rounds of assay design, respectively. HP SNP assays are simple, sensitive, robust, and inexpensive. These advantages favor the application of this technique for SNP assays of M. tuberculosis and other organisms.

Dual FRET molecular beacons for mRNA detection in living cells

The ability to visualize in real-time the expression level and localization of specific endogenous RNAs in living cells can offer tremendous opportunities for biological and disease studies. Here we demonstrate such a capability using a pair of molecular beacons, one with a donor and the other with an acceptor fluorophore that hybridize to adjacent regions on the same mRNA target, resulting in fluorescence resonance energy transfer (FRET). Detection of the FRET signal significantly reduced false positives, leading to sensitive imaging of K-ras and survivin mRNAs in live HDF and MIAPaCa-2 cells. FRET detection gave a ratio of 2.25 of K-ras mRNA expression in stimulated and unstimulated HDF, comparable to the ratio of 1.95 using RT-PCR, and in contrast to the single-beacon result of 1.2. We further revealed intriguing details of K-ras and survivin mRNA localization in living cells. The dual FRET molecular beacons approach provides a novel technique for sensitive RNA detection and quantification in living cells.

Dual-function stem molecular beacons to assess mRNA expression in AT-rich transcripts of Plasmodium falciparum

The genome of the human malaria parasite Plasmodium falciparum is extremely AT-rich such that it is particularly difficult to design standard probes to identify and quantify specific transcripts. Biased AT genome contents (70%–80%) lead to a high proportion of short repetitions and a low free energy of binding between target sequences and their specific probes during hybridization. This causes nonspecific annealing and high background noise. We constructed molecular beacon probes with dual-function stems to avoid nonspecific detection and establish identical melting patterns for use with several fluorescent probes for the analysis of mRNA expression in P. falciparum in real-time reverse transcription PCR (RT-PCR) assays. The method proved highly efficient at detecting low transcript levels in P. falciparum microcultures. Conditions were established for two types of real-time instruments, demonstrating that molecular beacons with dual-function stems are a useful tool for the functional analysis of high AT genomes. The procedure could be adapted to high-throughput gene expression protocols for the biomolecular screening of the P. falciparum and other AT-rich genomes.

Guidelines for incorporating non-perfectly matched oligonucleotides into target-specific hybridization probes for a DNA microarray

Sequence-specific oligonucleotide probes play a crucial role in hybridization techniques including PCR, DNA microarray and RNA interference. Once the entire genome becomes the search space for target genes/genomic sequences, however, cross-hybridization to non-target sequences becomes a problem. Large gene families with significant similarity among family members, such as the P450s, are particularly problematic. Additionally, accurate single nucleotide polymorphism (SNP) detection depends on probes that can distinguish between nearly identical sequences. Conventional oligonucleotide probes that are perfectly matched to target genes/genomic sequences are often unsuitable in such cases. Carefully designed mismatches can be used to decrease cross-hybridization potential, but implementing all possible mismatch probes is impractical. Our study provides guidelines for designing non-perfectly matched DNA probes to target DNA sequences as desired throughout the genome. These guidelines are based on the analysis of hybridization data between perfectly matched and non-perfectly matched DNA sequences (single-point or double-point mutated) calculated in silico. Large changes in hybridization temperature predicted by these guidelines for non-matched oligonucleotides fit independent experimental data very well. Applying the guidelines to find oligonucleotide microarray probes for P450 genes, we confirmed the ability of our point mutation method to differentiate the individual genes in terms of thermodynamic calculations of hybridization and sequence similarity.

GAD67 and GAD65 mRNA and protein expression in cerebrocortical regions of elderly patients with schizophrenia

Gamma-Aminobutyric acid (GABA), the principal inhibitory neurotransmitter of CNS, has been consistently implicated in the pathophysiology of schizophrenia. GABA is synthesized from glutamate by the enzyme glutamic acid decarboxylase (GAD). Two isoforms of GAD have been identified and have been named GAD65 and GAD67 based on their apparent molecular weights. In this study, GAD65 and GAD67 mRNA and protein levels were measured by using real-time RT-PCR and immunoblotting, respectively, in post-mortem brain tissue from the dorsolateral prefrontal cortex (DLPFC) and the occipital cortex of the elderly persons with schizophrenia and matched normal controls. In addition, the mRNA expression of GAT-1, one of the principal transporters of GABA, was also studied in the same subjects. Expression of GAD65 and GAD67 mRNA in the DLPFC and in the occipital cortex was significantly elevated in patients with schizophrenia, whereas the expression of the corresponding proteins and GAT-1 mRNA was unchanged. Although the levels of GAD65 and GAD67 messages were increased in schizophrenia subjects, the proportion of the two GAD isoforms remained constant in controls and schizophrenics. In the human DLPFC, GAD65 mRNA was found to be expressed significantly less than the message for GAD67, approximately 16% of that observed for GAD67. On the contrary, the abundance of GAD65 protein in the DLPFC was about 350% of that observed for GAD67. The results suggest a substantial dysregulation of GAD mRNA expression in schizophrenia and, taken together with the results of protein expression studies, raise the possibility that both cortical and subcortical GABA function may be compromised in the disease.

Single nucleotide polymorphism detection in aldehyde dehydrogenase 2 (ALDH2) gene using bacterial magnetic particles based on dissociation curve analysis

Single nucleotide polymorphism (SNP) detection for aldehyde dehydrogenase 2 (ALDH2) gene based on DNA thermal dissociation curve analysis was successfully demonstrated using an automated system with bacterial magnetic particles (BMPs) by developing a new method for avoiding light scattering caused by nanometer-size particles when using commercially available fluorescent dyes such as FITC, Cy3, and Cy5 as labeling chromophores. Biotin-labeled PCR products in ALDH2, two allele-specific probes (Cy3-labeled detection probe for ALDH2*1 and Cy5-labeled detection probe for ALDH2*2), streptavidin-immobilized BMPs (SA-BMPs) were simultaneously mixed. The mixture was denatured at 70 degrees C for 3 min, cooled slowly to 25 degrees C, and incubated for 10 min, allowing the DNA duplex to form between Cy3- or Cy5-labeled detection probes and biotin-labeled PCR products on SA-BMPs. Then duplex DNA-BMP complex was heated to 58 degrees C, a temperature determined by dissociation curve analysis and a dissociated single-base mismatched detection probe was removed at the same temperature under precise control. Furthermore, fluorescence signal from the detection probe was liberated into the supernatant from completely matched duplex DNA-BMP complex by heating to 80 degrees C and measured. In the homozygote target DNA (ALDH2*1/*1 and ALDH2*2/*2), the fluorescence signals from single-base mismatched were decreased to background level, indicating that mismatched hybridization was efficiently removed by the washing process. In the heterozygote target DNA (ALDH2*1/*2), each fluorescence signals was at a similar level. Therefore, three genotypes of SNP in ALDH2 gene were detected using the automated detection system with BMPs.

Real-time monitoring of nucleic acid ligation in homogenous solutions using molecular beacons

Nucleic acids ligation is a vital process in the repair, replication and recombination of nucleic acids. Traditionally, it is assayed by denatured gel electrophoresis and autoradiography, which are not sensitive, and are complex and discontinuous. Here we report a new approach for ligation monitoring using molecular beacon DNA probes. The molecular beacon, designed in such a way that its sequence is complementary with the product of the ligation process, is used to monitor the nucleic acid ligation in a homogeneous solution and in real-time. Our method is fast and simple. We are able to study nucleic acids ligation kinetics conveniently and to determine the activity of DNA ligase accurately. We have studied different factors that influence DNA ligation catalyzed by T4 DNA ligase. The major advantages of our method are its ultrasensitivity, excellent specificity, convenience and real-time monitoring in homogeneous solution. This method will be widely useful for studying nucleic acids ligation process and other nucleic acid interactions.

RNA editing and alternative splicing of human serotonin 2C receptor in schizophrenia

Serotonin 2C receptor (5-HT2CR) heterogeneity in the brain occurs mostly from two different sources: (i) 5-HT2CR mRNA undergoes adenosine-to-inosine editing events at five positions, which leads to amino acid substitutions that produce receptor variants with different pharmacological properties; (ii) 5-HT2CR mRNA is alternatively spliced, resulting in a truncated mRNA isoform (5-HT2CR-tr) which encodes a non-functional serotonin receptor. 5-HT2CR mRNA editing efficiencies and the expression of the full-length and the truncated 5-HT2CR mRNA splice isoforms were analyzed in the prefrontal cortex of elderly subjects with schizophrenia vs. matched controls (ns = 15). No significant differences were found, indicating that there are no alterations in editing or alternative splicing of 5-HT2CRs that are associated with schizophrenia in persons treated with antipsychotic medications. Quantitation of 5-HT2CR and 5-HT2CR-tr mRNA variants revealed that the expression of 5-HT2CR-tr was approximately 50% of that observed for the full-length isoform.

Length and statistical weight of bubbles in DNA melting

We present measurements of the length of the bubble versus temperature in the melting transition of DNA oligomers. The sequences are clamped at the ends of GC pairs (strong binding), and have AT rich (weaker binding) middle regions of variable length B relative to the molecule size. We use a quenching technique to trap intermediate states. We find that the average relative bubble size <l> grows from zero for increasing temperature, but reaches a plateau at a length of order B, producing a discontinuous transition with finite bubble size. The statistical weight of the bubble states decreases as B is reduced, the transition becoming more cooperative.

Studies of temperature-dependent electronic transduction on DNA hairpin loop sensor

A self-assembly monolayer (SAM) of hairpin DNA can be formed on a gold substrate in order to make special biosensors. Labeling the hairpin loop probes with electroactive compositions rather than a fluorophore illustrates interesting profiles of redox current versus temperature. For a biosensor interacting with perfectly complementary targets, the profile shows a characteristic plateau, which disappears when the targets have a single base variation. The plateau is split into multiple steps by tuning the hybridization temperature. We propose that the phenomena are due to hairpin loop compartmentalization. The novel characteristics lead to a thermal gradient detection method that permits perfect discrimination of a target sequence from single nucleotide mismatches.

Electrochemical interrogation of conformational changes as a reagentless method for the sequence-specific detection of DNA

We report a strategy for the reagentless transduction of DNA hybridization into a readily detectable electrochemical signal by means of a conformational change analogous to the optical molecular beacon approach. The strategy involves an electroactive, ferrocene-tagged DNA stem-loop structure that self-assembles onto a gold electrode by means of facile gold-thiol chemistry. Hybridization induces a large conformational change in this surface-confined DNA structure, which in turn significantly alters the electron-transfer tunneling distance between the electrode and the redoxable label. The resulting change in electron transfer efficiency is readily measured by cyclic voltammetry at target DNA concentrations as low as 10 pM. In contrast to existing optical approaches, an electrochemical DNA (E-DNA) sensor built on this strategy can detect femtomoles of target DNA without employing cumbersome and expensive optics, light sources, or photodetectors. In contrast to previously reported electrochemical approaches, the E-DNA sensor achieves this impressive sensitivity without the use of exogenous reagents and without sacrificing selectivity or reusability. The E-DNA sensor thus offers the promise of convenient, reusable detection of picomolar DNA.

Sequence-universal recognition of duplex DNA by oligonucleotides via pseudocomplementarity and helix invasion

The well-known Watson-Crick complementarity rules, which were discovered 50 years ago, elegantly direct the specific pairing of two DNA single strands. On the contrary, once formed, the double-stranded (ds) DNA lacks such a simple and sequence-universal recognition principle, since most of the characteristic chemical groups of nucleobases are now buried deep inside the double helix, the major DNA form. We report a promising versatile approach for highly selective recognition of designated sites within dsDNA featuring considerable practical potential for a variety of molecular-biological, biotechnological, gene-therapeutic, and diagnostic applications. It may also have implications for prebiotic evolution of genetic machinery at the primordial stages of the origin of life. Our design synergistically employs the robust helix-invasion ability of recently developed DNA mimics and analogs, pseudocomplementary peptide nucleic acids and pseudocomplementary oligonucleotides, thus enabling the sequence-unrestricted recognition of chosen DNA duplexes by nucleobase oligomers. Using this basically general approach, we selectively tagged a unique mixed-base site on the target dsDNA fragment with streptavidin and/or multiply labeled this site with fluorophores via the primer-extension reaction.

Solving the riddle of the bright mismatches: labeling and effective binding in oligonucleotide arrays

RNA binding to high-density oligonucleotide arrays has shown tantalizing differences with solution experiments. We analyze here its sequence specificity, fitting binding affinities to sequence composition in large datasets. Our results suggest that the fluorescent labels interfere with binding, causing a catch-22. To be detected, the RNA must both glow and bind: without labels it cannot be seen even if bound, while with too many it will not bind. A simple model for the binding of labeled oligonucleotides sheds light on the interplay between binding energies and labeling probability.

Real-time PCR assay for detection of fluoroquinolone resistance associated with grlA mutations in Staphylococcus aureus

Resistance to fluoroquinolones among clinical isolates of Staphylococcus aureus has become a clinical problem. Therefore, a rapid method to identify S. aureus and its susceptibility to fluoroquinolones could provide clinicians with a useful tool for the appropriate use of these antimicrobial agents in the health care settings. In this study, we developed a rapid real-time PCR assay for the detection of S. aureus and mutations at codons Ser-80 and Glu-84 of the grlA gene encoding the DNA topoisomerase IV, which are associated with decreased susceptibility to fluoroquinolones. The detection limit of the assay was 10 genome copies per reaction. The PCR assay was negative with DNA from all 26 non-S. aureus bacterial species tested. A total of 85 S. aureus isolates with various levels of fluoroquinolone resistance was tested with the PCR assay. The PCR assay correctly identified 100% of the S. aureus isolates tested compared to conventional culture methods. The correlation between the MICs of ciprofloxacin, levofloxacin, and gatifloxacin and the PCR results was 98.8%. The total time required for the identification of S. aureus and determination of its susceptibility to fluoroquinolones was about 45 min, including DNA extraction. This new rapid PCR assay represents a powerful method for the detection of S. aureus and its susceptibility to fluoroquinolones.

Single-molecule detection of DNA hybridization

We demonstrate the detection of nanometer-scale conformational changes of single DNA oligomers through a micromechanical technique. The quantity monitored is the displacement of a micrometer-size bead tethered to a surface by the probe molecule undergoing the conformational change. This technique allows probing of conformational changes within distances beyond the range of fluorescence resonance energy transfer. We apply the method to detect single hybridization events of label-free target oligomers. Hybridization of the target is detected through the conformational change of the probe.

High accuracy genotyping directly from genomic DNA using a rolling circle amplification based assay

BACKGROUND

Rolling circle amplification of ligated probes is a simple and sensitive means for genotyping directly from genomic DNA. SNPs and mutations are interrogated with open circle probes (OCP) that can be circularized by DNA ligase when the probe matches the genotype. An amplified detection signal is generated by exponential rolling circle amplification (ERCA) of the circularized probe. The low cost and scalability of ligation/ERCA genotyping makes it ideally suited for automated, high throughput methods.

RESULTS

A retrospective study using human genomic DNA samples of known genotype was performed for four different clinically relevant mutations: Factor V Leiden, Factor II prothrombin, and two hemochromatosis mutations, C282Y and H63D. Greater than 99% accuracy was obtained genotyping genomic DNA samples from hundreds of different individuals. The combined process of ligation/ERCA was performed in a single tube and produced fluorescent signal directly from genomic DNA in less than an hour. In each assay, the probes for both normal and mutant alleles were combined in a single reaction. Multiple ERCA primers combined with a quenched-peptide nucleic acid (Q-PNA) fluorescent detection system greatly accellerated the appearance of signal. Probes designed with hairpin structures reduced misamplification. Genotyping accuracy was identical from either purified genomic DNA or genomic DNA generated using whole genome amplification (WGA). Fluorescent signal output was measured in real time and as an end point.

CONCLUSIONS

Combining the optimal elements for ligation/ERCA genotyping has resulted in a highly accurate single tube assay for genotyping directly from genomic DNA samples. Accuracy exceeded 99 % for four probe sets targeting clinically relevant mutations. No genotypes were called incorrectly using either genomic DNA or whole genome amplified sample.

Multiple resistance mechanisms among Aspergillus fumigatus mutants with high-level resistance to itraconazole

A collection of Aspergillus fumigatus mutants highly resistant to itraconazole (RIT) at 100 micro g ml(-1) were selected in vitro (following UV irradiation as a preliminary step) to investigate mechanisms of drug resistance in this clinically important pathogen. Eight of the RIT mutants were found to have a mutation at Gly54 (G54E, -K, or -R) in the azole target gene CYP51A. Primers designed for highly conserved regions of multidrug resistance (MDR) pumps were used in reverse transcriptase PCR amplification reactions to identify novel genes encoding potential MDR efflux pumps in A. fumigatus. Two genes, AfuMDR3 and AfuMDR4, showed prominent changes in expression levels in many RIT mutants and were characterized in more detail. Analysis of the deduced amino acid sequence encoded by AfuMDR3 revealed high similarity to major facilitator superfamily transporters, while AfuMDR4 was a typical member of the ATP-binding cassette superfamily. Real-time quantitative PCR with molecular beacon probes was used to assess expression levels of AfuMDR3 and AfuMDR4. Most RIT mutants showed either constitutive high-level expression of both genes or induction of expression upon exposure to itraconazole. Our results suggest that overexpression of one or both of these newly identified drug efflux pump genes of A. fumigatus and/or selection of drug target site mutations are linked to high-level itraconazole resistance and are mechanistic considerations for the emergence of clinical resistance to itraconazole.

Design of molecular beacons for AmpliDet RNA assay--characterization of binding stability and probe specificity

AmpliDet RNA is a real-time diagnostic method, the specificity of which is defined mainly by the molecular beacon (MB). MBs can be characterized according to the stability of their stem-and-loop structures and that of the probe-target duplex via the free energies accompanying their formation. By the application of thermodynamic models, we propose a prediction method for these deltaG(0) parameters, which was compared to experimental analysis. The average absolute discrepancies for deltaG(0)(41) and for the melting temperatures of MB secondary structures were 0.30 +/- 0.26 kcal/mol and 2.15 +/- 1.5 degrees C, respectively. deltaG(0)(41) of probe-target interaction was predicted with a discrepancy of 1.2 +/- 1.0 kcal/mol. To characterize specificity, we formulated a model system with several MBs of highly similar sequence, but different lengths, and template RNAs carrying different types of mutations. We demonstrated the ability to detect a point mutation, or to tolerate one, irrespective of mismatch type. Of the nucleotide analogues tested, universal pyrimidine was found to increase MB tolerance substantially toward polymorphism. In the present study MBs were characterized under AmpliDet RNA conditions, with respect to probe stability, binding strength, and specificity, which led us to propose a design method, useful for probe design for AmpliDet RNA and adaptable to microarrays.

Destabilization of the HIV-1 complementary sequence of TAR by the nucleocapsid protein through activation of conformational fluctuations

The nucleocapsid protein NCp7 of HIV-1 possesses nucleic acid chaperone properties that are critical for the two obligatory strand transfer reactions required for the synthesis of a complete proviral DNA by reverse transcriptase. The first DNA strand transfer relies on the destabilization by NCp7 of double-stranded segments of the transactivation response region (TAR) sequence at the 3' end of the genomic RNA and the complementary sequence cTAR at the 3' terminus of minus strong-stop DNA, the early product of reverse transcription. In order to determine the dynamics of NCp7-mediated nucleic acid destabilization, we investigated by time-resolved fluorescence spectroscopy and two photon fluorescence correlation spectroscopy, the interaction of a doubly labeled cTAR sequence with NC(12-55) containing NCp7 CCHC zinc fingers and flanking basic amino acid residues. From the chemical rates and the activation energy associated with the conformational fluctuations observed in the absence of NC, it is concluded that such fluctuations are associated with the opening and closing of the double-stranded terminal segments of cTAR. The destabilizing activity of NC(12-55) occurs mainly through a major increase of the opening rate constant of cTAR. Moreover, NC appears to augment the number of pathways between the open and closed states of cTAR, suggesting that it initiates melting of base-pairs at different locations within the terminal segments of cTAR. This activity of NC on the dynamics of cTAR secondary structure is thought to be critical for the formation of the cTAR-TAR complex, which is essential for the specificity and extent of proviral DNA synthesis by reverse transcriptase.

Hybridization kinetics and thermodynamics of molecular beacons

Molecular beacons are increasingly being used in many applications involving nucleic acid detection and quantification. The stem-loop structure of molecular beacons provides a competing reaction for probe-target hybridization that serves to increase probe specificity, which is particularly useful when single-base discrimination is desired. To fully realize the potential of molecular beacons, it is necessary to optimize their structure. Here we report a systematic study of the thermodynamic and kinetic parameters that describe the molecular beacon structure-function relationship. Both probe and stem lengths are shown to have a significant impact on the binding specificity and hybridization kinetic rates of molecular beacons. Specifically, molecular beacons with longer stem lengths have an improved ability to discriminate between targets over a broader range of temperatures. However, this is accompanied by a decrease in the rate of molecular beacon-target hybridization. Molecular beacons with longer probe lengths tend to have lower dissociation constants, increased kinetic rate constants, and decreased specificity. Molecular beacons with very short stems have a lower signal-to-background ratio than molecular beacons with longer stems. These features have significant implications for the design of molecular beacons for various applications.

Hybridization of 2'-O-methyl and 2'-deoxy molecular beacons to RNA and DNA targets

Molecular beacons are stem-loop hairpin oligonucleotide probes labeled with a fluorescent dye at one end and a fluorescence quencher at the other end; they can differentiate between bound and unbound probes in homogeneous hybridization assays with a high signal-to-background ratio and enhanced specificity compared with linear oligonucleotide probes. However, in performing cellular imaging and quantification of gene expression, degradation of unmodified molecular beacons by endogenous nucleases can significantly limit the detection sensitivity, and results in fluorescence signals unrelated to probe/target hybridization. To substantially reduce nuclease degradation of molecular beacons, it is possible to protect the probe by substituting 2'-O-methyl RNA for DNA. Here we report the analysis of the thermodynamic and kinetic properties of 2'-O-methyl and 2'-deoxy molecular beacons in the presence of RNA and DNA targets. We found that in terms of molecular beacon/target duplex stability, 2'-O-methyl/RNA > 2'-deoxy/RNA > 2'-deoxy/DNA > 2'-O-methyl/DNA. The improved stability of the 2'-O-methyl/RNA duplex was accompanied by a slightly reduced specificity compared with the duplex of 2'-deoxy molecular beacons and RNA targets. However, the 2'-O-methyl molecular beacons hybridized to RNA more quickly than 2'-deoxy molecular beacons. For the pairs tested, the 2'-deoxy-beacon/DNA-target duplex showed the fastest hybridization kinetics. These findings have significant implications for the design and application of molecular beacons.

Ultra-rapid DNA analysis using HyBeacon probes and direct PCR amplification from saliva

We describe a novel probe technology, termed HyBeacons, which provides a new homogeneous method for fluorescence-based sequence detection and allele discrimination. Employing a single nucleotide polymorphism located in the N-acetyltransferase 2 gene as a model system, we demonstrate the utility of HyBeacon probes for rapid and reliable sequence analysis. We also demonstrate that homozygous and heterozygous samples may be accurately identified using a single HyBeacon oligonucleotide. Polymorphic DNA sequences were detected and differentiated by real-time PCR and melt peak methodologies, without performing extraction of genomic DNA prior to target amplification. Employing a combination of homogeneous HyBeacon analysis, the rapid thermal cycling conditions of the LightCycler and direct amplification from saliva, allowed samples to be genotyped within 30 min. Such rapid non-invasive diagnostic technologies may permit 'point-of-care' genetic testing to be performed in hospitals and doctor's surgeries.

Structure-function relationships of shared-stem and conventional molecular beacons

Molecular beacons are oligonucleotide probes capable of forming a stem-loop hairpin structure with a reporter dye at one end and a quencher at the other end. Conventional molecular beacons are designed with a target-binding domain flanked by two complementary short arm sequences that are independent of the target sequence. Here we report the design of shared-stem molecular beacons with one arm participating in both stem formation when the beacon is closed and target hybridization when it is open. We performed a systematic study to compare the behavior of conventional and shared-stem molecular beacons by conducting thermodynamic and kinetic analyses. Shared-stem molecular beacons form more stable duplexes with target molecules than conventional molecular beacons; however, conventional molecular beacons may discriminate between targets with a higher specificity. For both conventional and shared-stem molecular beacons, increasing stem length enhanced the ability to differentiate between wild-type and mutant targets over a wider range of temperatures. Interestingly, probe-target hybridization kinetics were similar for both classes of molecular beacons and were influenced primarily by the length and sequence of the stem. These findings should enable better design of molecular beacons for various applications.