High-Performance Hydrogen Evolution from MoS2(1-x) P(x) Solid Solution

Design and multilevel regulation of transition metal phosphides for efficient and industrial water electrolysis

Renewable energy electrolysis of water to produce hydrogen is an effective measure to break the energy dilemma. However, achieving activity and stability at a high current density is still a key problem in water electrolyzers. Transition metal phosphides (TMPs), with high activity and relative inexpensiveness, have become excellent candidates for the production of highly pure green hydrogen for industrial applications. In this mini-review, multilevel regulation strategies including nanoscale control, surface composition and interface structure design of high-performance TMPs for hydrogen evolution are systematically summarized. On this basis, in order to achieve large-scale hydrogen production in industry, the hydrogen evolution performance and stability of TMPs at a high current density are also discussed. Peculiarly, the practical application and requirements in proton exchange membrane (PEM) or anion exchange membrane (AEM) electrolyzers can guide the advanced design of regulatory strategies of TMPs for green hydrogen production from renewable energy. Finally, the challenges and prospects in the future development trend of TMPs for efficient and industrial water electrolysis are given.

Two-Dimensional Nanoarchitectonics for Two-Dimensional Materials: Interfacial Engineering of Transition-Metal Dichalcogenides

Transition-metal dichalcogenides (TMDs) have attracted increasing attention in fundamental studies and technological applications owing to their atomically thin thickness, expanded interlayer distance, motif band gap, and phase-transition ability. Even though TMDs have a wide variety of material assets from semiconductor to semimetallic to metallic, the materials with fixed features may not show excellence for precise application. As a result of exclusive crystalline polymorphs, physical and chemical assets of TMDs can be efficiently modified via various approaches of interface nanoarchitectonics, including heteroatom doping, heterostructure, phase engineering, reducing size, alloying, and hybridization. With modified properties, TMDs become interesting materials in diverse fields, including catalysis, energy, electronics, transistors, and optoelectronics.

Controlled Surface Modification of Cobalt Phosphide with Sulfur Tunes Hydrogenation Catalysis

Transition metal phosphides have shown promise as catalysts for water splitting and hydrotreating, especially when a small amount of sulfur is incorporated into the phosphides. However, the effect of sulfur on catalysis is not well understood. In part, this is because conventional preparation methods of sulfur-doped transition metal phosphides lead to sulfur both inside and at the surface of the material. Here, we present an alternative method of modifying cobalt phosphide (CoP) with sulfur using molecular S-transfer reagents, namely, phosphine sulfides (SPR3). SPR3 added sulfur to the surface of CoP and using a series of SPR3 reagents having different P═S bond strengths enabled control over the amount and type of sulfur transferred. Our results show that there is a distribution of different sulfur sites possible on the CoP surface with S-binding strengths in the range of 69 to 84 kcal/mol. This provides fundamental information on how sulfur binds to an amorphous CoP surface and provides a basis to assess how number and type of sulfur on CoP influences catalysis. For the catalytic hydrogenation of cinnamaldehyde, intermediate amounts of sulfur with intermediate binding strengths at the surface of CoP were optimal. With some but not too much sulfur, CoP exhibited a higher hydrogenation productivity and a decreased formation of secondary reaction products. Our work provides important insight into the S-effect on the catalysis by transition metal phosphides and opens new avenues for catalyst design.

An Investigation of PPy@1T/2H MoS2 Composites with Durable Photothermal-Promoted Effect in Photo-Fenton Degradation of Methylene Blue and in Water Evaporation

MoS2 has garnered considerable attention as an exceptional co-catalyst that is capable of significantly enhancing the efficiency of H2O2 decomposition in advanced oxidation processes (AOPs). This improvement allows for a reduction in the required amounts of H2O2 and Fe2+. In this study, we investigated the cyclic durability of photo-Fenton catalysts, focusing on the degradation of pollutants through the introduction of PPy into heterogeneous 1T-2H MoS2 units. The resulting photothermal-Fenton catalysts, comprising non-ferrous Fenton catalysts, demonstrated excellent degradation performance for simulated pollutants. In comparison with 1T-2H MoS2, the PPy@1T-2H MoS2 composite exhibited remarkable stability and photothermal enhancement in the photo-Fenton degradation of methylene blue (MB) under visible light irradiation. The photo-Fenton reaction efficiently degraded contaminants, achieving 99% removal within 5 min and 99.8% removal within 30 min. Moreover, the co-catalyst complex displayed enhanced cyclic stability during the photo-Fenton reaction, with a contaminant removal efficiency of 92%, even after the 13th cyclic test. The combined effects of PPy and 1T-2H MoS2 demonstrated improved efficiency in both photocatalytic and photo-Fenton catalytic reactions. Furthermore, PPy@1T-2H MoS2 exhibited outstanding performance in the photothermal evaporation of water, achieving an efficiency of 86.3% under one solar irradiation.

Direct Synthesis of Ammonia from Nitrate on Amorphous Graphene with Near 100% Efficiency

Ammonia is an indispensable commodity in the agricultural and pharmaceutical industries. Direct nitrate-to-ammonia electroreduction is a decentralized route yet challenged by competing side reactions. Most catalysts are metal-based, and metal-free catalysts with high nitrate-to-ammonia conversion activity are rarely reported. Herein, it is shown that amorphous graphene synthesized by laser induction and comprising strained and disordered pentagons, hexagons, and heptagons can electrocatalyze the eight-electron reduction of NO₃ ^- to NH₃ with a Faradaic efficiency of ≈100% and an ammonia production rate of 2859 µg cm^-2 h^-1 at -0.93 V versus reversible hydrogen electrode. X-ray pair-distribution function analysis and electron microscopy reveal the unique molecular features of amorphous graphene that facilitate NO₃ ^- reduction. In situ Fourier transform infrared spectroscopy and theoretical calculations establish the critical role of these features in stabilizing the reaction intermediates via structural relaxation. The enhanced catalytic activity enables the implementation of flow electrolysis for the on-demand synthesis and release of ammonia with >70% selectivity, resulting in significantly increased yields and survival rates when applied to plant cultivation. The results of this study show significant promise for remediating nitrate-polluted water and completing the NO_x cycle.

Nature-Inspired Design of Nano-Architecture-Aligned Ni5P4-Ni2P/NiS Arrays for Enhanced Electrocatalytic Activity of Hydrogen Evolution Reaction (HER)

The projection of developing sustainable and cost-efficient electrocatalysts for hydrogen production is booming. However, the full potential of electrocatalysts fabricated from earth-abundant metals has yet to be exploited to replace Pt-group metals due to inadequate efficiency and insufficient design strategies to meet the ever-increasing demands for renewable energies. To improve the electrocatalytic performance, the primary challenge is to optimize the structure and electronic properties by enhancing the intrinsic catalytic activity and expanding the active catalytic surface area. Herein, we report synthesizing a 3D nanoarchitecture of aligned Ni₅P₄-Ni₂P/NiS (plate/nanosheets) using a phospho-sulfidation process. The durability and unique design of prickly pear cactus in desert environments by adsorbing moisture through its extensive surface and ability to bear fruits at the edges of leaves inspire this study to adopt a similar 3D architecture and utilize it to design an efficient heterostructure catalyst for HER activity. The catalyst comprises two compartments of the vertically aligned Ni₅P₄-Ni₂P plates and the NiS nanosheets, resembling the role of leaves and fruits in the prickly pear cactus. The Ni₅P₄-Ni₂P plates deliver charges to the interface areas, and the NiS nanosheets significantly influence H_ad and transfer electrons for the HER activity. Indeed, the synergistic presence of heterointerfaces and the epitaxial NiS nanosheets can substantially improve the catalytic activity compared to nickel phosphide catalysts. Notably, the onset overpotential of the best-modified ternary catalysts exhibits (35 mV) half the potential required for nickel phosphide catalysts. This promising catalyst demonstrates 70 and 115 mV overpotentials to attain current densities of 10 and 100 mA cm^-2, respectively. The obtained Tafel slope is 50 mV dec^-1, and the measured double-layer capacitance from cyclic voltammetry (CV) for the best ternary electrocatalyst is 13.12 mF cm^-2, 3 times more than the nickel phosphide electrocatalyst. Further, electrochemical impedance spectroscopy (EIS) at the cathodic potentials reveals that the lowest charge transfer resistance is linked to the best ternary electrocatalyst, ranging from 430 to 1.75 Ω cm^-2. This improvement can be attributed to the acceleration of the electron exchangeability at the interfaces. Our findings demonstrate that the epitaxial NiS nanosheets expand the active catalytic surface area and simultaneously elevate the intrinsic catalytic activity by introducing heterointerfaces, which leads to accommodating more H_ad at the interfaces.

Direct Urea/H2O2 Fuel Cell with a Hierarchical Porous Nanoglass Anode for High-Efficiency Energy Conversion

Direct urea/H₂O₂ fuel cells (DUFCs) constitute a sustainable bifunctional energy conversion technique devoted to simultaneously eliminating environmental wastewater with urea and generating clean energy. However, exploring an efficient anode material for DUFCs still remains a huge challenge. In this work, a Ni-P hierarchical porous nanoglass (HPNG) catalytic electrode was developed via a low-cost, industrially available electrodeposition technique, which exhibits one of the best performances reported so far in the urea oxidation reaction (UOR), with a potential of 1.330 V at a current density of 10 mA cm^-2 and a Tafel slope of 9.77 mV dec^-1. The superior UOR performance of the HPNG electrode is attributed to the excellent intrinsic catalytic activity of NG with a high-energy state and an extremely enlarged surface area from the unique 3D hierarchical porous structure. Furthermore, a DUFC system with the HPNG anode shows a performance breakthrough as indicated by the maximum power density of 38.15 mW cm^-2 for 0.5 M urea, representing one of the best yet reported DUFCs. Our work demonstrates the feasibility of the scalable production of HPNG electrodes and is expected to be a great contribution to the development of the practical use of DUFCs in the near future for bifunctional energy conversion.

Tiny Ni3S2 boosting MoS2 hydrogen evolution in alkali by enlarging coupling boundaries and stimulating basal plane

The relatively slow reaction kinetics of the hydrogen evolution reaction (HER) by water electrolysis in alkali hinder its large-scale industrial production. To improve the HER activity in alkaline media, a novel Ni₃S₂/MoS₂/CC catalytic electrode was synthesized by a simple two-step hydrothermal method in this work. The modification of MoS₂ by Ni₃S₂ could facilitate the adsorption and dissociation of water, thus accelerating the alkaline HER kinetics. Moreover, the unique morphology of small Ni₃S₂ nanoparticles grown on MoS₂ nanosheets not only increased the interface coupling boundaries, which acted as the most efficient active sites for the Volmer step in alkaline medium, but also sufficiently activated the MoS₂ basal plane, thus providing more active sites. Consequently, Ni₃S₂/MoS₂/CC only needed overpotentials of 189.4 and 240 mV to drive current densities of 100 and 300 mA·cm^-2, respectively. More importantly, its catalytic performance of Ni₃S₂/MoS₂/CC even exceeded that of Pt/C at a high current density after 261.7 mA·cm^-2 in 1.0 M KOH.

Filling the Gap between Heteroatom Doping and Edge Enrichment of 2D Electrocatalysts for Enhanced Hydrogen Evolution

Composition modulation and edge enrichment are established protocols to steer the electronic structures and catalytic activities of two-dimensional (2D) materials. It is believed that a heteroatom enhances the catalytic performance by activating the chemically inert basal plane of 2D crystals. However, the edge and basal plane have inherently different electronic states, and how the dopants affect the edge activity remains ambiguous. Here we provide mechanistic insights into this issue by monitoring the hydrogen evolution reaction (HER) performance of phosphorus-doped MoS2 (P-MoS2) nanosheets via on-chip electrocatalytic microdevices. Upon phosphorus doping, MoS2 nanosheet gets catalytically activated and, more importantly, shows higher HER activity in the edge than the basal plane. In situ transport measurement demonstrates that the improved HER performance of P-MoS2 is derived from intrinsic catalytic activity rather than charge transfer. Density functional theory calculations manifest that the edge sites of P-MoS2 are energetically more favorable for HER. The finding guides the rational design of edge-dominant P-MoS2, reaching a minuscule onset potential of ∼30 mV and Tafel slope of 48 mV/dec that are benchmarked against other activation methods. Our results disclose the hitherto overlooked edge activity of 2D materials induced by heteroatom doping that will provide perspectives for preparing next-generation 2D catalysts.

Low-dimensional transition metal sulfide-based electrocatalysts for water electrolysis: overview and perspectives

Hydrogen prepared by electrocatalytic decomposition of water ("green hydrogen") has the advantages of high energy density and being clean and pollution-free, which is an important energy carrier to face the problems of the energy crisis and environmental pollution. However, the most used commercial electrocatalysts are based on expensive and scarce precious metals and their alloy materials, which seriously restricts the large-scale industrial application of hydrogen energy. The development of efficient non-precious metal electrocatalysts is the key to achieving the sustainable development of the hydrogen energy industry. Transition metal sulfides (TMS) have become popular non-precious metal electrocatalysts with great application potential due to their large specific surface area, unique electronic structure, and rich regulatory strategies. To further improve their catalytic activities for practical application, many methods have been tried in recent years, including control of morphology and crystal plane, metal/nonmetal doping, vacancy engineering, building of self-supporting electrocatalysts, interface engineering, etc. In this review, we introduce firstly the common types of TMS and their preparation. Additionally, we summarize the recent developments of the many different strategies mentioned above for efficient water electrolysis applications. Furthermore, the rationales behind their enhanced electrochemical performances are discussed. Lastly, the challenges and future perspectives are briefly discussed for TMS-based water dissociation catalysts.

Orbital Modulation with P Doping Improves Acid and Alkaline Hydrogen Evolution Reaction of MoS2

There has been great interest in developing and designing economical, stable and highly active electrocatalysts for the hydrogen evolution reaction (HER) via water splitting in an aqueous solution at different pH values. Transition-metal dichalcogenides (TMDCs), e.g., MoS₂, are identified to be promising catalysts for the HER due to the limited active sites at their edges, while the large basal plane of MoS₂ is inert and shows poor performance in electrocatalytic hydrogen production. We theoretically propose orbital modulation to improve the HER performance of the basal plane of MoS₂ through non-metal P doping. The substitutional doping of P provides empty 3p_z orbitals, perpendicular to the basal plane, can enhance the hydrogen adsorption for acid HER and can promote water dissociation for alkaline HER, which creates significant active sites and enhances the electronic conductivity as well. In addition, 3P-doped MoS₂ exhibits excellent HER catalytic activity with ideal free energy at acid media and low reaction-barrier energy in alkaline media. Thus, the doping of P could significantly boost the HER activity of MoS₂ in such conditions. Our study suggests an effective strategy to tune HER catalytic activity of MoS₂ through orbital engineering, which should also be feasible for other TMDC-based electrocatalysts.

Facile Synthesis of Highly Dispersed and Well-Alloyed Bimetallic Nanoparticles on Oxide Support

Supported alloy catalysts play a pivotal role in many heterogeneous catalytic processes of socioeconomic and environmental importance. But the controlled synthesis of supported alloy nanoparticles with consistent composition and tight size distribution remains a challenging issue. Herein, a simple yet effective method for preparation of highly dispersed, homogeneously alloyed bimetallic nanoparticles on oxide supports is reported. This method is based on solid solution of metal cations in parent oxide and strong electrostatic adsorption of a secondary metal species onto the oxide surface. In the reductive annealing process, hydrogen spillover occurs from the surface metal with a higher reduction potential to the solute metal in solid solution, leading to metal exsolution and homogenous alloying of the metals on the oxide surface. The ceria-supported Ni-Pt alloy is chosen as a model catalyst and hydrazine monohydrate decomposition is chosen as a probe reaction to demonstrate this method, and particularly its advantages over the conventional impregnation and galvanic replacement methods. A systematic application of this method using different oxides and base-noble metal pairs further elucidates its applicability and generality.

The effect of halogenated spacer cations on structural symmetry-breaking in 2D halide double perovskites

Herein, we present a strategy to introduce above-room temperature non-centrosymmetry into two-dimensional halide double perovskites (A'₄M'M''X₈) using a halogenated A'-site organic linker, 3-chloro/bromo propyl amine. These crystals exhibit anisotropic polarization with three orders of magnitude variation between different crystallographic axes. The non-centrosymmetry is further confirmed by piezo-force microscopy studies and its role in the thermal and optical properties was investigated.

Nanostructured Metallic Glass in a Highly Upgraded Energy State Contributing to Efficient Catalytic Performance

Metallic glasses (MGs), with high density of low coordination sites and high Gibbs free energy state, are novel promising and competitive candidates in the family of electrochemical catalysts. However, it remains a grand challenge to modify the properties of MGs by control of the disordered atomic structure. Recently, nanostructured metallic glasses (NGs), consisting of amorphous nanometer-sized grains connected by amorphous interfaces, have been reported to exhibit tunable properties compared to the MGs with identical chemical composition. Here, it is demonstrated that electrodeposited Ni-P NG is characterized by an extremely high energy state due to its heterogeneous structure, which significantly promotes the catalytic performance. Moreover, the Ni-P NG with a heterogeneous structure is a perfect precursor for the fabrication of unique honey-like nanoporous structure, which displays superior catalytic performance in the urea oxidation reaction (UOR). Specifically, modified Ni-P NG requires a potential of mere 1.36 V at 10 mA cm^-2 , with a Tafel slope of 13 mV dec^-1 , which is the best UOR performance in Ni-based alloys. The present work demonstrates that the nanostructurization of MGs provides a universal and effective pathway to upgrade the energy state of MGs for the design of high-performance catalysts in energy conversion.

Synergistic effect of S vacancy and P dopants in MoS2/Mo2C to promote electrocatalytic hydrogen evolution

The development of high efficiency, low-budget and excellent stability of electrocatalysts is critical for improving hydrogen evolution reaction (HER). MoS2 is a well-known excellent electrocatalytic hydrogen evolution catalyst without noble...

Unveiling the role of 2D monolayer Mn-doped MoS2 material: toward an efficient electrocatalyst for H2 evolution reaction

Two-dimensional (2D) monolayer pristine MoS₂ transition metal dichalcogenide (TMD) is the most studied material because of its potential applications as nonprecious electrocatalyst for the hydrogen evolution reaction (HER). Previous studies have shown that the basal planes of 2D MoS₂ are catalytically inert, and hence it cannot be used directly in desired applications such as electrochemical HER in industry. Here, we thoroughly studied a defect-engineered Mn-doped 2D monolayer MoS₂ (Mn-MoS₂) material, where Mn was doped in pristine MoS₂ to activate its inert basal planes. Using the density functional theory (DFT) method, we performed rigorous inspection of the electronic structures and properties of the 2D monolayer Mn-MoS₂ as a promising alternative to noble metal-free catalyst for effective HER. A periodic 2D slab of monolayer Mn-MoS₂ was created to study the electronic properties (such as band gap, band structures and total density of states (DOS)) and the reaction pathways occurring on the surface of this material. The detailed HER mechanism was explored by creating an Mn₁Mo₉S₂₁ non-periodic finite molecular cluster model system using the M06-L DFT method including solvation effects to determine the reaction barriers and kinetics. Our study revealed that the 2D Mn-MoS₂ follows the most favorable Volmer-Heyrovsky reaction mechanism with a very low energy barrier during H₂ evolution. It was found that the change in the free energy barrier (ΔG) during the H˙-migration (i.e., Volmer) and Heyrovsky reactions is about 10.34-10.79 kcal mol^-1 (computed in the solvent phase), indicating that this material is an exceptional electrocatalyst for the HER. The Tafel slope (y) was lower in the case of the 2D monolayer Mn-MoS₂ material due to the overlap of the s-orbital of hydrogen and d-orbitals of the Mn atoms in the HOMO and LUMO transition states (TS1 and TS2) of both the Volmer and Heyrovsky reaction steps, respectively. The better stabilization of the atomic orbitals in the HER rate-limiting step Heyrovsky TS2 is the key for reducing the reaction barrier, and thus the overall catalysis, indicating a better electrocatalytic performance for H₂ evolution. This study focused on designing low-cost and efficient electrocatalysts for the HER using earth abundant transition metal dichalcogenides (TMDs) and decreasing the activation energy barriers by scrutinizing the kinetics of the reaction to achieve high reactivity.

Regulating Water Reduction Kinetics on MoP Electrocatalysts Through Se Doping for Accelerated Alkaline Hydrogen Production

Owing to its low cost, high conductivity, and chemical stability, Molybdenum phosphide (MoP) has great potential for electrochemically catalyzing the hydrogen evolution reaction (HER). Unfortunately, the development of high-activity MoP still remains a grand challenge in alkali-electrolyzers due to its sluggish water reduction kinetics. Here, we demonstrate a novel strategy for regulating the HER kinetics of the MoP nanowire cathode through partially substituting P atoms with Se dopants. In alkaline solutions, the Se-doped MoP (Se-MoP) nanowire cathode exhibits excellent HER performance with a greatly-decreased overpotential of ∼61 mV at 10 mA cm⁻² and a Tafel slope of ∼63 mV dec⁻¹, outperforming currently reported MoP-based electrocatalysts. Experimental and theoretical investigations reveal that Se doping not only facilitates the water dissociation on MoP, but also optimize the hydrogen adsorption free energy, eventually speeding up the sluggish alkaline HER kinetics. Therefore, this work paves a new path for designing MoP-based electrocatalyst with high HER performance in alkaline electrolyzers.

Partial sulfur vacancies created by carbon-nitrogen deposition of MoS2 for high-performance overall electrocatalytic water splitting

Electrocatalytic water splitting is a promising energy-efficient solution to obtain clean hydrogen energy. Bifunctional electrocatalysts made up of cheap and abundant elements and suitable for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) are critically needed, yet their performance deserves substantial improvement. The catalytic activity could be improved by creating unsaturated defects, which so far has rarely been demonstrated. Here, we combine the effects of unsaturated sulfur vacancies and bi-elemental C and N doping in MoS₂ nanosheets to achieve high-performance bifunctional electrocatalysts. The new method to obtain C and N doped MoS₂ at high temperature is presented. The obtained C-N-MoS₂/CC-T catalysts with S unsaturated defect sites and Mo-N links exhibit high activity and improved electrical conductivity for both the HER and OER in alkaline media. Systematic experiments and density functional theory (DFT) analysis confirm that CN-doping exposes catalytically active sites and enhances water adsorption. The optimized C-N-MoS₂/CC-700 catalyst exhibits low overpotentials of 90 and 230 mV at 10 mA cm^-2 for the HER and OER, respectively. Importantly, the porous C-N-MoS₂/CC-700 nanosheets deliver low voltages of 1.58 V for the overall water splitting at 10 mA cm^-2 and robust operation for 30 h without any reduced activity. Such impressive performances are attributed to their unique structure with large specific surface area, abundant S unsaturated sites, Mo-N links, and shortened electron transfer paths. This partial defect filling by the bi-dopant incorporation approach is generic and is promising for a broad range of advanced energy materials.

Metal-Organic Frameworks-Derived Self-Supported Carbon-Based Composites for Electrocatalytic Water Splitting

Electrocatalytic water splitting has been considered as a promising strategy for the sustainable evolution of hydrogen energy and storage of intermittent electric energy. Efficient catalysts for electrocatalytic water splitting are urgently demanded to decrease the overpotentials and promote the sluggish reaction kinetics. Carbon-based composites, including heteroatom-doped carbon materials, metals/alloys@carbon composites, metal compounds@carbon composites, and atomically dispersed metal sites@carbon composites have been widely used as the catalysts due to their fascinating properties. However, these electrocatalysts are almost powdery form, and should be cast on the current collector by using the polymeric binder, which would result in the unsatisfied electrocatalytic performance. In comparison, a self-supported electrode architecture is highly attractive. Recently, self-supported metal-organic frameworks (MOFs) constructed by coordination of metal centers and organic ligands have been considered as suitable templates/precursors to construct free-standing carbon-based composites grown on conductive substrate. MOFs-derived carbon-based composites have various merits, such as the well-aligned array architecture and evenly distributed active sites, and easy functionalization with other species, which make them suitable alternatives to non-noble metal-included electrocatalysts. In this review, we intend to show the research progresses by employment of MOFs as precursors to prepare self-supported carbon-based composites. Focusing on these MOFs-derived carbon-based nanomaterials, the latest advances in their controllable synthesis, composition regulation, electrocatalytic performances in hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and overall water splitting (OWS) are presented. Finally, the challenges and perspectives are showed for the further developments of MOFs-derived self-supported carbon-based nanomaterials in electrocatalytic reactions.

Activating the Basal Plane of 2H-MoS2 by Doping Phosphor for Enhancement in the Photocatalytic Degradation of Organic Contaminants

The 2H phases of MoS₂ (2H-MoS₂) monolayers present a wealth of new opportunities in photocatalysis owing to their photoinduced catalyzing ability and excellent charge carrier mobility. However, the complete release of their catalytic activities is restricted by their inert basal planes. Although the inert base planes of 2H-MoS₂ are known to be activated by atomic doping, the operational principle of the exotic atoms remains vague. In this study, the unutilized inert base sites of MoS₂ were activated via an oxygen-aided P-substituted method (denoted as POMS). Molecular structural tests and analyses of POMS indicated that the inert MoS₂ substrate is activated when the inerratic crystal phases transform to amorphous phases in the P-doping process. The fully activated inert base planes provide sufficient reaction sites for photo-oxidized water contaminants. The designed POMS presented superior activity in organic degradation and completely removed sulfamethoxazole within 20 min. Uncovering these operational principles provides a theoretical basis for designing effective catalysts.

Roadmap and Direction toward High-Performance MoS2 Hydrogen Evolution Catalysts

MoS₂ intrinsically show Pt-like hydrogen evolution reaction (HER) performance. Pristine MoS₂ displayed low HER activity, which was caused by low quantities of catalytic sites and unsatisfactory conductivity. Then, phase engineering and S vacancy were developed as effective strategies to elevate the intrinsic HER performance. Heterojunctions and dopants were successful strategies to improve HER performance significantly. A couple of state-of-the-art MoS₂ catalysts showed HER performance comparable to Pt. Applying multiple strategies in the same electrocatalyst was the key to furnish Pt-like HER performance. In this review, we summarize the available strategies to fabricate superior MoS₂ HER catalysts and tag the important works. We analyze the well-defined strategies for fabricating a superior MoS₂ electrocatalyst, propose complementary strategies which could help meet practical requirements, and help people design highly efficient MoS₂ electrocatalysts. We also provide a brief perspective on assembling practical electrochemical systems by high-performance MoS₂ electrocatalysts, apply MoS₂ in other important electrocatalysis reactions, and develop high-performance two-dimensional (2D) dichalcogenide HER catalysts not limited to MoS₂. This review will help researchers to obtain a better understanding of development of superior MoS₂ HER electrocatalysts, providing directions for next-generation catalyst development.

Transition Metal-Based 2D Layered Double Hydroxide Nanosheets: Design Strategies and Applications in Oxygen Evolution Reaction

Water splitting driven by renewable energy sources is considered a sustainable way of hydrogen production, an ideal fuel to overcome the energy issue and its environmental challenges. The rational design of electrocatalysts serves as a critical point to achieve efficient water splitting. Layered double hydroxides (LDHs) with two-dimensionally (2D) layered structures hold great potential in electrocatalysis owing to their ease of preparation, structural flexibility, and tenability. However, their application in catalysis is limited due to their low activity attributed to structural stacking with irrational electronic structures, and their sluggish mass transfers. To overcome this challenge, attempts have been made toward adjusting the morphological and electronic structure using appropriate design strategies. This review highlights the current progress made on design strategies of transition metal-based LDHs (TM-LDHs) and their application as novel catalysts for oxygen evolution reactions (OERs) in alkaline conditions. We describe various strategies employed to regulate the electronic structure and composition of TM-LDHs and we discuss their influence on OER performance. Finally, significant challenges and potential research directions are put forward to promote the possible future development of these novel TM-LDHs catalysts.

Synergistic zinc doping and defect engineering toward MoS2 nanosheet arrays for highly efficient electrocatalytic hydrogen evolution

Herein, we have demonstrated synergistic zinc doping and defect engineering toward MoS₂ nanosheet arrays assembled on carbon cloth (CC) by a one-pot hydrothermal approach for the first time, which are employed directly as a cathode for the hydrogen evolution reaction (HER). In our strategy, simultaneously doping sufficient Zn atoms and introducing a defect-rich structure into a MoS₂ nanosheet can synergistically increase active sites. Additionally, the assembly of such nanosheets on CC can achieve lower charge-transfer resistance for the highly efficient HER.

Direct Synthesis of Molybdenum Phosphide Nanorods on Silicon Using Graphene at the Heterointerface for Efficient Photoelectrochemical Water Reduction

MoP nanorod-array catalysts were directly synthesized on graphene passivated silicon photocathodes without secondary phase. Mo-O-C covalent bondings and energy band bending at heterointerfaces facilitate the electron transfer to the reaction sites. Numerous catalytic sites and drastically enhanced anti-reflectance of MoP nanorods contribute to the high solar energy conversion efficiency. Transition metal phosphides (TMPs) and transition metal dichalcogenides (TMDs) have been widely investigated as photoelectrochemical (PEC) catalysts for hydrogen evolution reaction (HER). Using high-temperature processes to get crystallized compounds with large-area uniformity, it is still challenging to directly synthesize these catalysts on silicon photocathodes due to chemical incompatibility at the heterointerface. Here, a graphene interlayer is applied between p-Si and MoP nanorods to enable fully engineered interfaces without forming a metallic secondary compound that absorbs a parasitic light and provides an inefficient electron path for hydrogen evolution. Furthermore, the graphene facilitates the photogenerated electrons to rapidly transfer by creating Mo-O-C covalent bondings and energetically favorable band bending. With a bridging role of graphene, numerous active sites and anti-reflectance of MoP nanorods lead to significantly improved PEC-HER performance with a high photocurrent density of 21.8 mA cm^-2 at 0 V versus RHE and high stability. Besides, low dependence on pH and temperature is observed with MoP nanorods incorporated photocathodes, which is desirable for practical use as a part of PEC cells. These results indicate that the direct synthesis of TMPs and TMDs enabled by graphene interlayer is a new promising way to fabricate Si-based photocathodes with high-quality interfaces and superior HER performance.

Ni2P nanoflakes for the high-performing urea oxidation reaction: linking active sites to a UOR mechanism

Urea electrolysis is regarded as an effective method for addressing both energy and environment issues. Herein, we successfully synthesized Ni2P nanoflakes for catalyzing the urea oxidation reaction (UOR). Due to the higher electrical conductivity as well as the prevailing tendency in triggering the UOR via a direct electro-oxidation mechanism, Ni2P nanoflakes exhibit comparable UOR activity (1.33 V vs. RHE for onset-potential, and 95.47 mA·cm-2 at 1.6 V vs. RHE) to the most active state-of-the-art catalysts, rendering them an effective alternative to precious metals such as Pt and Rh. The accelerated proton-coupled electron transfer (PCET) process caused by PO43- facilitates the in situ generation of NiOOH; thus, the UOR process is initiated at a lower onset-potential on Ni2P nanoflakes than on β-Ni(OH)2 nanoflakes. The in situ generated NiOOH instead of the Ni2P phase in Ni2P nanoflakes functions as an active site during the UOR process, while both NiOOH and the Ni2P phase serve as active sites in the OER process. This work provides insights into the understanding of the UOR mechanism and opens a new avenue to design low-cost Ni-based phosphide UOR catalysts.

Active Basal Plane Catalytic Activity via Interfacial Engineering for a Finely Tunable Conducting Polymer/MoS2 Hydrogen Evolution Reaction Multilayer Structure

The fixation of the catalyst interface is an important consideration for the design of practical applications. However, the electronic structure of MoS₂ is sensitive to its embedding environment, and the catalytic performance of MoS₂ catalysts may be altered significantly by the type of binding agents and interfacial structure. Interfacial engineering is an effective method for designing efficient catalysts, arising from the close contact between different components, which facilitates charge transfer and strong electronic interactions. Here, we have developed a layer-by-layer (LbL) strategy for the preparation of interfacial MoS₂-based catalyst structures with two types of conducting polymers on various substrates. We demonstrate how the assembled partners in the LbL structure can significantly impact the electronic structures in MoS₂. As the number of bilayers grows, using polypyrrole as a binder remarkably increases the catalytic efficacy as compared to using polyaniline. On the one hand, the ratio of S₂^2- (or S^2-), which is related to the remaining active hydrogen evolution reaction (HER) species, is further increased. On the other hand, density functional theory calculations indicate that the interfacial charge transport from the conducting polymers to MoS₂ may boost the HER activity of the interfacial structure of the conducting polymer/MoS₂ by decreasing the adsorption free energy of the intermediate H* at the S sites in the basal plane of MoS₂. The optimized catalytic efficacy of the (conducting polymer/MoS₂)_n assembly peaks is obtained with 16 assembly cycles. In preparing interfacial catalytic structures, the LbL-based strategy exhibits several key advantages, including the flexibility of choosing assembly partners, the ability to fine-tune the structures with precision at the nanometer scale, and planar homogeneity at the centimeter scale. We expect that this LbL-based catalyst immobilization strategy will contribute to the fundamental understanding of the scalability and control of highly efficient electrocatalysts at the interface for practical applications.

Activation Strategy of MoS2 as HER Electrocatalyst through Doping-Induced Lattice Strain, Band Gap Engineering, and Active Crystal Plane Design

Doping engineering emerges as a contemporary technique to investigate the catalytic performance of MoS₂. Cation and anion co-doping appears as an advanced route toward electrocatalytic hydrogen evolution reaction (HER). V and N as dopants in MoS₂ (VNMS) build up a strain inside the crystal structure and narrow down the optical band gaps manifesting the shifting of the absorbance band toward lower energy and improved catalytic performance. FE-SEM, HR-TEM, and XRD analysis confirmed that V and N doping decreases agglomeration possibility, particle size, developed strain, and crystal defects during crystal growth. Frequency shift and peak broadening in Raman spectra confirmed the doping induced strain generation in MoS₂ leading to the modification of acidic and alkaline HER (51 and 110 mV @ 10 mAcm^-2, respectively) performance. The improved donor density in VNMS was confirmed by the Mott-Schottky analysis. Enhanced electrical conductivity and optimized electronic structures facilities H* adsorption/desorption in the catalytically active (001) plane of cation and anion co-doped MoS₂.

Distinctive MoS2-MoP nanosheet structures anchored on N-doped porous carbon support as a catalyst to enhance the electrochemical hydrogen production

The fabricated MoS₂-MoP/NC heterojunction electrocatalyst showed a low overpotential, small Tafel slope and excellent stability in alkaline and acidic media.

Hierarchical Ultrathin Mo/MoS2(1- x - y ) Px Nanosheets Assembled on P, N Co-Doped Carbon Nanotubes for Hydrogen Evolution in Both Acidic and Alkaline Electrolytes

Synergistically coupled 1D/2D materials have great potential for energy conversion application due to its high catalytic activity. Herein, an in situ assembly strategy is developed for preparing the P, N co-doped carbon nanotubes and Mo/MoS_{2(1- x - y )} P_x nanosheets composites (Mo/MoS_{2(1- x - y )} P_x @PNC) for hydrogen evolution reactions (HER). The PNC guarantees structural stability and fast charge transfer in a long-range, while Mo/MoS_{2(1- x - y )} P_x nanosheets offer a large electrochemically active surface area with embedded metallic Mo in improving its internal conductivity and rich surface/interface properties. Thus, the optimized catalyst (Mo/MoS_1.15 P_0.30 @PNC) possesses more surface active sites and exhibits extraordinary HER activities, with a small overpotential of -79 and -131 mV at 10 mA cm^-1 , and low Tafel slope of 49 and 82 mV dec^-1 in 0.5 m H₂ SO₄ and 1.0 m KOH, respectively. Density functional theory calculations confirm that the higher substitution of S atoms by P in MoS₂ can form strong Mo 3d-S 2p-P 2p hybridizations at Fermi level, resulting in the narrower bandgap and smaller ∆G_{H *} of hydrogen (H*) adsorption, thereby leading to the promoted HER activity.

Porous Plate-like MoP Assembly as an Efficient pH-Universal Hydrogen Evolution Electrocatalyst

Molybdenum phosphide is one of the most potential electrocatalysts for the hydrogen evolution reaction (HER), whereas it is still challenging to achieve an efficient molybdenum phosphide-based catalyst that performs well over a wide pH range. Herein, a porous nanoplate composed of small MoP flakes confined in thin N, P, S-triple-doped carbon (MoP@NPSC) was prepared by the assembly of phosphomolybdic acid (H₃PMo₁₂O₄₀·nH₂O, {PMo₁₂}) and egg white, followed by phosphorization. Given its small size (ca. 1 nm) in favor of deriving small particles and the oxygen-rich surface with strong coordination ability, the {PMo₁₂} cluster was selected to combine with egg white to obtain a lamellar hybrid precursor via a hydrogen bond. Through controllable phosphating, a nanoplate organized by interconnected MoP particles was generated, accompanied by the in situ formation of the N, P, S-doped carbon thin layer and pores from the pyrolysis of egg white. The plentiful pores, thin carbon coating, and multielement doping bring about promoted electrolyte/bubble diffusion, enhanced conductivity and stability, and lowered adsorption energy of hydrogen/hydroxyl, respectively. All of the above merits endow MoP@NPSC with prominent activity with low overpotentials of 50, 76, and 71 mV at 10 mA cm^-2 toward the HER in alkaline, neutral, and acid media, respectively, and nearly no attenuation after 40 h of testing. Especially, compared with commercial Pt/C, MoP@NPSC exhibits similar low onset potential and even better at large current density in 1 M KOH. The electrolyzer equipped with the MoP@NPSC cathode and the NiFe-LDH anode requires only 1.52 V to deliver 10 mA cm^-2 and can be powered by a solar cell (1.524 V) charged by sunlight.

Highly Crystalline Hollow Toroidal Copper Phosphosulfide via Anion Exchange: A Versatile Cation Exchange Nanoplatform

Postmodification of nanocrystals through cation exchange has been very successful in diversifying nanomaterial compositions while retaining the structural motif. Copper compound nanoparticles are particularly useful as templates because of inherent defects serving as effective cation diffusion routes and excellent cation mobility. Therefore, the development of shape-controlled multianion systems, such as copper phosphosulfide, can potentially lead to the formation of diverse metal phosphosulfide nanomaterials that have otherwise inaccessible compositions and structures. However, there is, to the best of our knowledge, no report on the shape-controlled synthesis of copper phosphosulfide nanoparticles because the introduction of the second anion to the metal compound might destroy the nanoparticle morphology and crystallinity due to the required high energy for anion diffusion and mixing. Herein, we report that it is feasible to transfer the structural motif of copper sulfide to copper phosphosulfide using tris(diethylamino)phosphine. The anion-mixed copper phosphosulfide in the form of a hollow toroid could provide a pathway to previously inaccessible phases and morphologies. We verified the versatility of a copper phosphosulfide hollow toroid as a cation-exchange template by the successful synthesis of cobalt, nickel, indium, and cadmium phosphosulfides as well as bimetallic cobalt-nickel phosphosulfide (Co_2-xNi_xP_1-yS_y) with a retained structural motif.

Canonic-Like HER Activity of Cr1- x Mox B2 Solid Solution: Overpowering Pt/C at High Current Density

Abundant transition metal borides are emerging as substitute electrochemical hydrogen evolution reaction (HER) catalysts for noble metals. Herein, an unusual canonic-like behavior of the c lattice parameter in the AlB₂ -type solid solution Cr_{1- x} Mo_x B₂ (x = 0, 0.25, 0.4, 0.5, 0.6, 0.75, 1) and its direct correlation to the HER activity in 0.5 M H₂ SO₄ solution are reported. The activity increases with increasing x, reaching its maximum at x = 0.6 before decreasing again. At high current densities, Cr_0.4 Mo_0.6 B₂ outperforms Pt/C, as it needs 180 mV less overpotential to drive an 800 mA cm^-2 current density. Cr_0.4 Mo_0.6 B₂ has excellent long-term stability and durability showing no significant activity loss after 5000 cycles and 25 h of operation in acid. First-principles calculations have correctly reproduced the nonlinear dependence of the c lattice parameter and have shown that the mixed metal/B layers, such as (110), promote hydrogen evolution more efficiently for x = 0.6, supporting the experimental results.

A nanostructured MoO2/MoS2/MoP heterojunction electrocatalyst for the hydrogen evolution reaction

Electrocatalytic production of hydrogen from water is considered to be a promising and sustainable strategy. In this work, the low-cost nanostructured MoO₂/MoS₂/MoP heterojunction is successfully synthesized by phosphorization of the pre-prepared urchin-like MoO₂/MoS₂ nanospheres as the stable, highly efficient electrocatalysis for the hydrogen evolution reaction (HER). The MoO₂/MoS₂/MoP-800 (MoO₂/MoS₂ nanospheres are phosphated at 800 °C) displays a catalytic ability for the HER with an overpotential of 135 mV to achieve 10 mA cm^-2 and a Tafel slope of 67 mV dec^-1 in 0.5 M H₂SO₄, which is superior to MoO₂/MoS₂ nanospheres (200 °C; 24 h), MoO₂/MoS₂/MoP-700 (MoO₂/MoS₂ nanospheres are phosphated at 700 °C) and MoO₂/MoS₂/MoP-900 (MoO₂/MoS₂ nanospheres are phosphated at 900 °C). Meanwhile, the catalyst exhibits superior properties for HER with an overpotential of 145 mV to achieve 10 mA cm^-2 and a Tafel slope of 71 mV dec^-1 in 1 M KOH solution. Detailed characterizations reveal that the improved HER performances are significantly related to P-doping and the spherical nanostructure. This work not only provides a low-cost selective for electrocatalytic production of hydrogen, but also serves as a guide to optimize the composition and structure of nanocomposites.

A Universal Strategy for Carbon-Supported Transition Metal Phosphides as High-Performance Bifunctional Electrocatalysts towards Efficient Overall Water Splitting

Exploring cost-effective and general approaches for highly active and stable bifunctional transition metal phosphide (TMP) electrocatalysts towards overall water splitting is greatly desirable and challenging. Herein, a general strategy combining sol-gel and a carbonization-assisted route was proposed to facilely fabricate a series of TMP nanoparticles, including CoP, MoP, FeP, Cu₂P, Ni₂P, PtP₂, FeNiP, CoNiP, and FeCoNiP, coupled in an amorphous carbon matrix with one-step carbon composite formation. The resultant NiFeP@C exhibits excellent activities as a bifunctional electrocatalyst toward oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) with low overpotentials of 260 and 160 mV, respectively, at 10 mA/cm² in 1 M KOH solution. With the NiFeP@C electrocatalyst as both electrode materials, an integrated electrolyzer can deliver 47.0 mA/cm² of current density at 1.60 V, better than the assembled Pt/C20∥IrO₂ counterpart. The encapsulation of NiFeP nanoparticles in the carbon matrix effectively prevents their corrosion and leads to almost unfading catalytic activities for more than 20 h for either the HER, OER, or overall water splitting, outperforming recently reported bifunctional electrocatalysts. The coexistence of Ni, Fe, P, and C would have synergetic effects to accelerate charge transfer and promote electrocatalytic activity. This universal strategy for TMP-based composites opens up a new avenue to explore TMPs as multifunctional materials for various applications.

Achieving Efficient Alkaline Hydrogen Evolution Reaction over a Ni5 P4 Catalyst Incorporating Single-Atomic Ru Sites

Developing efficient electrocatalysts for alkaline water electrolysis is central to substantial progress of alkaline hydrogen production. Herein, a Ni₅ P₄ electrocatalyst incorporating single-atom Ru (Ni₅ P₄ -Ru) is synthesized through the filling of Ru³⁺ species into the metal vacancies of nickel hydroxides and subsequent phosphorization treatment. Electron paramagnetic resonance spectroscopy, X-ray-based measurements, and electron microscopy observations confirm the strong interaction between the nickel-vacancy defect and Ru cation, resulting in more than 3.83 wt% single-atom Ru incorporation in the obtained Ni₅ P₄ -Ru. The Ni₅ P₄ -Ru as an alkaline hydrogen evolution reaction catalyst achieves low onset potential of 17 mV and an overpotential of 54 mV at a current density of 10 mA cm^-2 together with a small Tafel slope of 52.0 mV decade^-1 and long-term stability. Further spectroscopy analyses combined with density functional theory calculations reveal that the doped Ru sites can cause localized structure polarization, which brings the low energy barrier for water dissociation on Ru site and the optimized hydrogen adsorption free energy on the interstitial site, well rationalizing the experimental reactivity.

Self-Supported Transition-Metal-Based Electrocatalysts for Hydrogen and Oxygen Evolution

Electrochemical water splitting is a promising technology for sustainable conversion, storage, and transport of hydrogen energy. Searching for earth-abundant hydrogen/oxygen evolution reaction (HER/OER) electrocatalysts with high activity and durability to replace noble-metal-based catalysts plays paramount importance in the scalable application of water electrolysis. A freestanding electrode architecture is highly attractive as compared to the conventional coated powdery form because of enhanced kinetics and stability. Herein, recent progress in developing transition-metal-based HER/OER electrocatalytic materials is reviewed with selected examples of chalcogenides, phosphides, carbides, nitrides, alloys, phosphates, oxides, hydroxides, and oxyhydroxides. Focusing on self-supported electrodes, the latest advances in their structural design, controllable synthesis, mechanistic understanding, and strategies for performance enhancement are presented. Remaining challenges and future perspectives for the further development of self-supported electrocatalysts are also discussed.

Electrocatalytic activity sites for the oxygen evolution reaction on binary cobalt and nickel phosphides

The catalytic activity of CoNiP originates from the synergistic effect of CoOOH and NiOOH, rather than exclusively from CoOOH or NiOOH.

P-doped nickel sulfide nanosheet arrays for alkaline overall water splitting

Heazlewoodite, Ni₃S₂, is one of the most promising bifunctional electrocatalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline media due to its metallic conductivity and low cost.