Bio-Inspired Mechanotactic Hybrids for Orchestrating Traction-Mediated Epithelial Migration

Listen to Your Gut: Key Concepts for Bioengineering Advanced Models of the Intestine

The intestine performs functions central to human health by breaking down food and absorbing nutrients while maintaining a selective barrier against the intestinal microbiome. Key to this barrier function are the combined efforts of lumen-lining specialized intestinal epithelial cells, and the supportive underlying immune cell-rich stromal tissue. The discovery that the intestinal epithelium can be reproduced in vitro as intestinal organoids introduced a new way to understand intestinal development, homeostasis, and disease. However, organoids reflect the intestinal epithelium in isolation whereas the underlying tissue also contains myriad cell types and impressive chemical and structural complexity. This review dissects the cellular and matrix components of the intestine and discusses strategies to replicate them in vitro using principles drawing from bottom-up biological self-organization and top-down bioengineering. It also covers the cellular, biochemical and biophysical features of the intestinal microenvironment and how these can be replicated in vitro by combining strategies from organoid biology with materials science. Particularly accessible chemistries that mimic the native extracellular matrix are discussed, and bioengineering approaches that aim to overcome limitations in modelling the intestine are critically evaluated. Finally, the review considers how further advances may extend the applications of intestinal models and their suitability for clinical therapies.

Stiff Extracellular Matrix Promotes Invasive Behaviors of Trophoblast Cells

The effect of extracellular matrix (ECM) stiffness on embryonic trophoblast cells invasion during mammalian embryo implantation remains largely unknown. In this study, we investigated the effects of ECM stiffness on various aspects of human trophoblast cell behaviors during cell-ECM interactions. The mechanical microenvironment of the uterus was simulated by fabricating polyacrylamide (PA) hydrogels with different levels of stiffness. The human choriocarcinoma (JAR) cell lineage was used as the trophoblast model. We found that the spreading area of JAR cells, the formation of focal adhesions, and the polymerization of the F-actin cytoskeleton were all facilitated with increased ECM stiffness. Significantly, JAR cells also exhibited durotactic behavior on ECM with a gradient stiffness. Meanwhile, stiffness of the ECM affects the invasion of multicellular JAR spheroids. These results demonstrated that human trophoblast cells are mechanically sensitive, while the mechanical properties of the uterine microenvironment could play an important role in the implantation process.

Purse-string contraction guides mechanical gradient-dictated heterogeneous migration of epithelial monolayer

Mechanical heterogeneity has been recognized as an important role in mediating collective cell migration, yet the related mechanism has not been elucidated. Herein, we fabricate heterogeneous stiffness gradients by leveraging microelastically-patterned hydrogels with varying periodic distance. We observe that a decrease in the periodic distance of the mechanical heterogeneity is accompanied by an overall increase in the velocity and directionality of the migrating monolayer. Moreover, inhibition of ROCK- and myosin ⅡA- but not Rac1-mediated contraction reduces monolayer migration on the mechanically heterogeneous substrates. Furthermore, we find that F-actin and myosin ⅡA form purse-string at the leading edge on the mechanically heterogeneous substrates. Together, these findings not only show that the orientational cell-cell contraction promotes collective cell migration under the mechanical heterogeneity, but also demonstrate that the mechanosensation arising from large-scale cell-cell interactions through purse-string formation mediated cell-cell orientational contraction can feed back to regulate the reorganization of epithelial tissues. STATEMENT OF SIGNIFICANCE: By detecting the links between heterogenous rigidity and collective cell migration behavior at the molecular level, we reveal that collective cell migration in the mechanical heterogeneity is driven by ROCK- and myosin-ⅡA-dependent cytoskeletal tension. We confirm that cytoskeletal tension across the epithelial tissue is holistically linked through F-actin and myosin-ⅡA, which cooperate to form purse-string structures for modulating collective tissue behavior on the exogenous matrix with mechanical heterogeneity. Mechanical heterogeneity initiates tissue growth, remodelling, and morphogenesis by orientating cell contractility. Therefore, tensional homeostasis across large-scale cell interactions appears to be necessary and sufficient to trigger collective tissue behavior. Overall, these findings shed light on the role of mechanical heterogeneity in tissue microenvironment for reorganization and morphogenesis.

Collective Behaviors of Active Matter Learning from Natural Taxes Across Scales

Taxis orientation is common in microorganisms, and it provides feasible strategies to operate active colloids as small-scale robots. Collective taxes involve numerous units that collectively perform taxis motion, whereby the collective cooperation between individuals enables the group to perform efficiently, adaptively, and robustly. Hence, analyzing and designing collectives is crucial for developing and advancing microswarm toward practical or clinical applications. In this review, natural taxis behaviors are categorized and synthetic microrobotic collectives are discussed as bio-inspired realizations, aiming at closing the gap between taxis strategies of living creatures and those of functional active microswarms. As collective behaviors emerge within a group, the global taxis to external stimuli guides the group to conduct overall tasks, whereas the local taxis between individuals induces synchronization and global patterns. By encoding the local orientations and programming the global stimuli, various paradigms can be introduced for coordinating and controlling such collective microrobots, from the viewpoints of fundamental science and practical applications. Therefore, by discussing the key points and difficulties associated with collective taxes of different paradigms, this review potentially offers insights into mimicking natural collective behaviors and constructing intelligent microrobotic systems for on-demand control and preassigned tasks.

Silk Fibroin-Based Tough Hydrogels with Strong Underwater Adhesion for Fast Hemostasis and Wound Sealing

Rapid and strong adhesion of hydrogel adhesives is required for instant wound closure and hemostasis. However, in situ hydrogel formation and sufficient adhesion at target tissue sites in biological environments are severely compromised by the presence of blood and body fluids. In this work, an underwater adhesive hydrogel (named SHCa) is fabricated with rapid in situ gelation, enhanced mechanical toughness, and robust underwater adhesion. The SHCa can undergo rapid UV irradiation-induced gelation under water within 5 s and adhere firmly to underwater surfaces for 6 months. The synergistic effects of crystalline β-sheet structures and dynamic energy-dissipating mechanisms enhance the mechanical toughness and cohesion, supporting the balance between adhesion and cohesion in wet environments. Importantly, the SHCa can achieve rapid in situ gelation and robust underwater adhesion at various tissue surfaces in highly dynamic fluid environments, substantially outperforming the commercially available tissue adhesives. The lap shear adhesion strength and wound closure strength of SHCa on blood-covered substrates are 7.24 and 12.68 times higher than those of cyanoacrylate glue, respectively. Its fast hemostasis and wound sealing performance are further demonstrated in in vivo animal models. The proposed hydrogel with strong underwater adhesion provides an effective tool for fast wound closure and hemostasis.

Mechanomaterials: A Rational Deployment of Forces and Geometries in Programming Functional Materials

The knowledge of mechanics of materials has been extensively implemented in developing functional materials, giving rise to recent advances in soft actuators, flexible electronics, mechanical metamaterials, tunable mechanochromics, regenerative mechanomedicine, etc. While conventional mechanics of materials offers passive access to mechanical properties of materials in existing forms, a paradigm shift is emerging toward proactive programming of materials' functionality by leveraging the force-geometry-property relationships. Here, such a rising field is coined as "mechanomaterials". To profile the concept, the design principles in this field at four scales is first outlined, namely the atomic scale, the molecular scale, the manipulation of nanoscale materials, and the microscale design of structural materials. A variety of techniques have been recruited to deliver the multiscale programming of functional mechanomaterials, such as strain engineering, capillary assembly, topological interlocking, kirigami, origami, to name a few. Engineering optical and biological functionalities have also been achieved by implementing the fundamentals of mechanochemistry and mechanobiology. Nonetheless, the field of mechanomaterials is still in its infancy, with many open challenges and opportunities that need to be addressed. The authors hope this review can serve as a modest spur to attract more researchers to further advance this field.

High-Throughput Routes to Biomaterials Discovery

Many existing clinical treatments are limited in their ability to completely restore decreased or lost tissue and organ function, an unenviable situation only further exacerbated by a globally aging population. As a result, the demand for new medical interventions has increased substantially over the past 20 years, with the burgeoning fields of gene therapy, tissue engineering, and regenerative medicine showing promise to offer solutions for full repair or replacement of damaged or aging tissues. Success in these fields, however, inherently relies on biomaterials that are engendered with the ability to provide the necessary biological cues mimicking native extracellular matrixes that support cell fate. Accelerating the development of such "directive" biomaterials requires a shift in current design practices toward those that enable rapid synthesis and characterization of polymeric materials and the coupling of these processes with techniques that enable similarly rapid quantification and optimization of the interactions between these new material systems and target cells and tissues. This manuscript reviews recent advances in combinatorial and high-throughput (HT) technologies applied to polymeric biomaterial synthesis, fabrication, and chemical, physical, and biological screening with targeted end-point applications in the fields of gene therapy, tissue engineering, and regenerative medicine. Limitations of, and future opportunities for, the further application of these research tools and methodologies are also discussed.

Progress in the mechanical modulation of cell functions in tissue engineering

In mammals, mechanics at multiple stages-nucleus to cell to ECM-underlie multiple physiological and pathological functions from its development to reproduction to death. Under this inspiration, substantial research has established the role of multiple aspects of mechanics in regulating fundamental cellular processes, including spreading, migration, growth, proliferation, and differentiation. However, our understanding of how these mechanical mechanisms are orchestrated or tuned at different stages to maintain or restore the healthy environment at the tissue or organ level remains largely a mystery. Over the past few decades, research in the mechanical manipulation of the surrounding environment-known as substrate or matrix or scaffold on which, or within which, cells are seeded-has been exceptionally enriched in the field of tissue engineering and regenerative medicine. To do so, traditional tissue engineering aims at recapitulating key mechanical milestones of native ECM into a substrate for guiding the cell fate and functions towards specific tissue regeneration. Despite tremendous progress, a big puzzle that remains is how the cells compute a host of mechanical cues, such as stiffness (elasticity), viscoelasticity, plasticity, non-linear elasticity, anisotropy, mechanical forces, and mechanical memory, into many biological functions in a cooperative, controlled, and safe manner. High throughput understanding of key cellular decisions as well as associated mechanosensitive downstream signaling pathway(s) for executing these decisions in response to mechanical cues, solo or combined, is essential to address this issue. While many reports have been made towards the progress and understanding of mechanical cues-particularly, substrate bulk stiffness and viscoelasticity-in regulating the cellular responses, a complete picture of mechanical cues is lacking. This review highlights a comprehensive view on the mechanical cues that are linked to modulate many cellular functions and consequent tissue functionality. For a very basic understanding, a brief discussion of the key mechanical players of ECM and the principle of mechanotransduction process is outlined. In addition, this review gathers together the most important data on the stiffness of various cells and ECM components as well as various tissues/organs and proposes an associated link from the mechanical perspective that is not yet reported. Finally, beyond addressing the challenges involved in tuning the interplaying mechanical cues in an independent manner, emerging advances in designing biomaterials for tissue engineering are also explored.

Spatiotemporal Oscillation in Confined Epithelial Motion upon Fluid-to-Solid Transition

Fluid-to-solid phase transition in multicellular assembly is crucial in many developmental biological processes, such as embryogenesis and morphogenesis. However, biomechanical studies in this area are limited, and little is known about factors governing the transition and how cell behaviors are regulated. Due to different stresses present, cells could behave distinctively depending on the nature of tissue. Here we report a fluid-to-solid transition in geometrically confined multicellular assemblies. Under circular confinement, Madin-Darby canine kidney (MDCK) monolayers undergo spatiotemporally oscillatory motions that are strongly dependent on the confinement size and distance from the periphery of the monolayers. Nanomechanical mapping reveals that epithelial tensional stress and traction forces on the substrate are both dependent on confinement size. The oscillation pattern and cellular nanomechanics profile appear well correlated with stress fiber assembly and cell polarization. These experimental observations imply that the confinement size-dependent surface tension regulates actin fiber assembly, cellular force generation, and cell polarization. Our analyses further suggest a characteristic confinement size (approximates to MDCK's natural correlation length) below which surface tension is sufficiently high and triggers a fluid-to-solid transition of the monolayers. Our findings may shed light on the geometrical and nanomechanical control of tissue morphogenesis and growth.

A fiber-shaped neural probe with alterable elastic moduli for direct implantation and stable electronic-brain interfaces

Researchers developing implantable neural probes face a dilemma. Rigid neural probes facilitate direct implantation, but the brain tissue suffers from a vulnerable interface and a strong neuroinflammatory response due to mechanical mismatch between the probe and the brain tissue. Flexible neural probes offer stable interfaces and eliminate neuroinflammatory responses but require auxiliary implantation. Here, we have created a new kind of micro fiber-shaped neural probe with alterable elastic moduli before and after implantation. Carbon nanotube fibers and calcium crosslinked sodium alginate functioned as the core electrode and sheath layer, respectively. The response of calcium crosslinked sodium alginate to water will alter the probe elastic moduli from ∼10 GPa to ∼10 kPa post implantation, which is close to the elastic modulus of brain tissue. The micro fiber probes were directly implanted into mouse brains without any additional materials. After implantation, they became soft and offered dynamically adaptable interfaces with a reduced inflammatory response, benefiting long-term monitoring of neuron signals. Continuous four week monitoring of neuron signals was achieved. The simplicity of the strategy makes it suitable for versatile neuron techniques in neuron recording and modulation.

Emerging intraoral biosensors

Biomedical devices that involved continuous and real-time health-care monitoring have drawn much attention in modern medicine, of which skin electronics and implantable devices are widely investigated. Skin electronics are characterized for their non-invasive access to the physiological signals, and implantable devices are superior at the diagnosis and therapy integration. Despite the significant progress achieved, many gaps remain to be explored to provide a more comprehensive overview of human health. As the connecting point of the outer environment and human systems, the oral cavity contains many unique biomarkers that are absent in skin or inner organs, and hence, this could become a promising alternative locus for designing health-care monitoring devices. In this review, we outline the status of the oral cavity during the communication of the environment and human systems and compare the intraoral devices with skin electronics and implantable devices from the biophysical and biochemical aspects. We further summarize the established diagnosis database and technologies that could be adopted to design intraoral biosensors. Finally, the challenges and potential opportunities for intraoral biosensors are discussed. Intraoral biosensors could become an important complement for existing biomedical devices to constitute a more reliable health-care monitoring system.

Guiding Bacterial Activity for Biofabrication of Complex Materials via Controlled Wetting of Superhydrophobic Surfaces

Superhydrophobic surfaces are promising for preventing fouling and the formation of biofilms, with important implications in the food chain, maritime transport, and health sciences, among others. In this work, we exploit the interplay between wetting principles of superhydrophobic surfaces and microbial fouling for advanced three-dimensional (3D) biofabrication of biofilms. We utilize hydrostatic and capillary pressures to finely control the air-water interface and the aerotaxis-driven biofabrication on superhydrophobic surfaces. Superhydrophobic 3D molds are produced by a simple surface modification that partially embeds hydrophobic particles in silicone rubber. Thereafter, the molds allow the templating of the air-water interface of the culture medium, where the aerobic nanocellulose-producing bacteria (Komagataeibacter medellinensis) are incubated. The biofabricated replicas are hollow and seamless nanofibrous objects with a controlled morphology. Gradients of thickness, topographical feature size, and fiber orientation on the biofilm are obtained by controlling wetting, incubation time, and nutrient availability. Furthermore, we demonstrate that capillary length limitations are overcome by using pressurized closed molds, whereby a persistent air plastron allows the formation of 3D microstructures, regardless of their morphological complexity. We also demonstrate that interfacial biofabrication is maintained for at least 12 days without observable fouling of the mold surface. In summary, we achieve controlled biofouling of the air-water interface as imposed by the experimental framework under controlled wetting. The latter is central to both microorganism-based biofabrication and fouling, which are major factors connecting nanoscience, synthetic biology, and microbiology.

High-Strength and High-Toughness Silk Fibroin Hydrogels: A Strategy Using Dynamic Host-Guest Interactions

Natural polymer-based hydrogels attract great attention because of their inherent biocompatibility and controllable biodegradability. However, the broad applications of these hydrogels require a combination of high mechanical strength, high toughness, fatigue resistance, as well as self-healing. The integration of this combination into one natural polymer-based hydrogel remains challenging. Here, a molecular design strategy was proposed to fabricate mechanically robust silk fibroin-based hydrogels using host-guest interactions. Silk fibroin molecules was chemically modified with cholesterol (Chol, guest) or β-cyclodextrin (β-CD, host), and host-guest interaction between Chol and β-CD moieties drove the supramolecular assemblies of hydrogels. The dissociation/reassociation behavior of host-guest complexation, serving as sacrificial bonds, endowed hydrogels with effective energy dissipation and rapid self-healing ability. The prepared silk fibroin-based hydrogels exhibited high mechanical strength, high toughness, and remarkable fatigue resistance, superior to conventional silk fibroin hydrogels. Moreover, due to reversible host-guest interactions, hydrogels achieved facile functional recovery after damage without any external stimuli. This design strategy provides an avenue to develop natural polymer-based materials with robust mechanical properties, thus broadening current hydrogel applications.

Interfacial nanoarchitectonics for responsive cellular biosystems

The living cell can be regarded as an ideal functional material system in which many functional systems are working together with high efficiency and specificity mostly under mild ambient conditions. Fabrication of living cell-like functional materials is regarded as one of the final goals of the nanoarchitectonics approach. In this short review article, material-based approaches for regulation of living cell behaviors by external stimuli are discussed. Nanoarchitectonics strategies on cell regulation by various external inputs are first exemplified. Recent approaches on cell regulation with interfacial nanoarchitectonics are also discussed in two extreme cases using a very hard interface with nanoarchitected carbon arrays and a fluidic interface of the liquid-liquid interface. Importance of interfacial nanoarchitectonics in controlling living cells by mechanical and supramolecular stimuli from the interfaces is demonstrated.

Neuro-taxis: Neuronal movement in gradients of chemical and physical environments

Environmental chemical and physical cues dynamically interact with migrating neurons and sprouting axons, and in particular, the gradients of environmental cues are regarded as one of the factors intimately involved in the neuronal movement. Since a growth cone was first described by Cajal, more than one century ago, chemical gradients have been suggested as one of the mechanisms by which the neurons determine proper paths and destinations. However, the gradients of physical cues, such as stiffness and topography, which also interact constantly with the neurons and their axons as a component of the extracellular environments, have rarely been noted regarding the guidance of neurons, despite their gradually increasingly reported influences in the case of nonneuronal-cell migration. In this review, we discuss chemical (i.e., chemo- and hapto-) and physical (i.e., duro-) taxis phenomena on the movement of neurons including axonal elongation. In addition, we suggest topotaxis, the most recently proposed physical-taxis phenomenon, as another potential mechanism in the neuronal movement, based on the reports of neuronal recognition of and responses to nanotopography.

Locally coupled electromechanical interfaces based on cytoadhesion-inspired hybrids to identify muscular excitation-contraction signatures

Coupling myoelectric and mechanical signals during voluntary muscle contraction is paramount in human-machine interactions. Spatiotemporal differences in the two signals intrinsically arise from the muscular excitation-contraction process; however, current methods fail to deliver local electromechanical coupling of the process. Here we present the locally coupled electromechanical interface based on a quadra-layered ionotronic hybrid (named as CoupOn) that mimics the transmembrane cytoadhesion architecture. CoupOn simultaneously monitors mechanical strains with a gauge factor of ~34 and surface electromyogram with a signal-to-noise ratio of 32.2 dB. The resolved excitation-contraction signatures of forearm flexor muscles can recognize flexions of different fingers, hand grips of varying strength, and nervous and metabolic muscle fatigue. The orthogonal correlation of hand grip strength with speed is further exploited to manipulate robotic hands for recapitulating corresponding gesture dynamics. It can be envisioned that such locally coupled electromechanical interfaces would endow cyber-human interactions with unprecedented robustness and dexterity.

Anisotropic stiffness gradient-regulated mechanical guidance drives directional migration of cancer cells

Interfacial interactions between cancer cells and surrounding microenvironment involve complex mechanotransduction mechanisms that are directly associated with tumor invasion and metastasis. Matrix remodeling triggers heterogeneity of stiffness in tumor microenvironment and thus generates anisotropic stiffness gradient (ASG). The migration of cancer cells mediated by ASG, however, still remains elusive. Based on a multi-layer polymerization method of microstructured hydrogels with surface topology, we develop an in vitro experimental platform for mechanical interactions of cancer cells with ASG matrix microenvironment. We show that mechanical guidance of mesenchymal cells is essentially modulated by ASG, leading to a spontaneous directional migration along the orientation parallel to the maximum stiffness although there is no stiffness gradient in the direction. The ASG-regulated mechanical guidance presents an alternative way of cancer cell directional migration. Further, our findings indicate that the mechanical guidance occurs only in mesenchymal cancer cells, but not in epithelial cancer cells, implying that cell contractility may contribute to ASG-regulated migration of cells. This work is not only helpful for elucidating the role of matrix remodeling in mediating tumor cell invasion and metastasis, but has potential implications for developing specific cancer treatments. STATEMENT OF SIGNIFICANCE: Local extracellular matrix (ECM) stiffening triggers mechanical heterogeneity in tumor microenvironment, which can exert a crucial impact on interfacial interactions between tumor cells and surrounding ECM. The underlying mechanobiological mechanism that tumor cells are modulated by mechanically heterogeneous ECM, however, still remains mysterious to a great extent. Through our established in vitro platform and analysis, we have demonstrated that anisotropic stiffness gradient (ASG) has the ability to elicit directional migration of cells, essentially depending on local stiffness gradients and the corresponding absolute stiffness values. This study is not only crucial for revealing the role of matrix remodeling in regulating tumor invasion and metastasis, but also offers a valuable guidance for developing anti-tumor therapies from the biomechanical perspective.

Differential Homeostasis of Sessile and Pendant Epithelium Reconstituted in a 3D-Printed "GeminiChip"

Local mechanical cues can affect crucial fate decisions of living cells. Transepithelial stress has been discussed in the context of epithelial monolayers, but the lack of appropriate experimental systems leads current studies to approximate it simply as an in-plane stress. To evaluate possible contribution of force vectors acting in other directions, double epithelium in a 3D-printed "GeminiChip" containing a sessile and a pendant channel is reconstituted. Intriguingly, the sessile epithelia is prone to apoptotic cell extrusion upon crowding, whereas the pendant counterpart favors live cell delamination. Transcriptome analyses show upregulation of RhoA, BMP2, and hypoxia-signaling genes in the pendant epithelium, consistent with the onset of an epithelial-mesenchymal transition program. HepG2 microtumor spheroids also display differential spreading patterns in the sessile and pendant configuration. Using this multilayered GeminiChip, these results uncover a progressive yet critical role of perpendicular force vectors in collective cell behaviors and point at fundamental importance of these forces in the biology of cancer.

Recent Progress in Macromolecule-Anchored Hybrid Gold Nanomaterials for Biomedical Applications

Gold nanoparticles (AuNPs), with elegant thermal, optical, or chemical properties due to quantum size effects, may serve as unique species for therapeutic or diagnostic applications. It is worth mentioning that their small size also results in high surface activity, leading to significantly impaired stability, which greatly hinders their biomedical utilizations. To overcome this problem, various types of macromolecular materials are utilized to anchor AuNPs so as to achieve advanced synergistic effect by dispersing, protecting, and stabilizing the AuNPs in polymeric-Au hybrid self-assemblies. In this review, the most recent development of polymer-AuNP hybrid systems, including AuNPs@polymeric nanoparticles, AuNPs@polymeric micelle, AuNPs@polymeric film, and AuNPs@polymeric hydrogel are discussed with respect to their different synthetic strategies. These sophisticated materials with diverse functions, oriented toward biomedical applications, are further summarized into several active domains in the areas of drug delivery, gene delivery, photothermal therapy, antibacterials, bioimaging, etc. Finally, the possible approaches for future design of multifunctional polymer-AuNP hybrids by combining hybrid chemistry with biological interface science are proposed.

Tactile Chemomechanical Transduction Based on an Elastic Microstructured Array to Enhance the Sensitivity of Portable Biosensors

Tactile sensors capable of perceiving biophysical signals such as force, pressure, or strain have attracted extensive interest for versatile applications in electronic skin, noninvasive healthcare, and biomimetic prostheses. Despite these great achievements, they are still incapable of detecting bio/chemical signals that provide even more meaningful and precise health information due to the lack of efficient transduction principles. Herein, a tactile chemomechanical transduction strategy that enables the tactile sensor to perceive bio/chemical signals is proposed. In this methodology, pyramidal tactile sensors are linked with biomarker-induced gas-producing reactions, which transduce biomarker signals to electrical signals in real time. The method is advantageous as it enhances electrical signals by more than tenfold based on a triple-step signal amplification strategy, as compared to traditional electrical biosensors. It also constitutes a portable and general platform capable of quantifying a wide spectrum of targets including carcinoembryonic antigen, interferon-γ, and adenosine. Such tactile chemomechanical transduction would greatly broaden the application of tactile sensors toward bio/chemical signals perception which can be used in ultrasensitive portable biosensors and chemical-responsive chemomechanical systems.

Dual-Stimuli Responsive Bismuth Nanoraspberries for Multimodal Imaging and Combined Cancer Therapy

Development of stimuli-responsive theranostics is of great importance for precise cancer diagnosis and treatment. Herein, bovine serum albumin (BSA) modified bismuth nanoraspberries (Bi-BSA NRs) are developed as cancer theranostic agents for multimodal imaging and chemo-photothermal combination therapy. The Bi-BSA NRs are synthesized in aqueous phase via a facile reduction method using Bi₂O₃ nanospheres as the sacrificial template. The morphology, biocompatibility, photothermal effect, drug loading/releasing abilities, chemotherapy effect, synergistic chemo-photothermal therapy efficacy, and multimodal imaging capacities of Bi-BSA NRs have been investigated. The results show that the NRs possess multiple unique features including (i) raspberry-like morphology with high specific surface area (∼52.24 m²·g^-1) and large cavity (total pore volume ∼0.30 cm³·g^-1), promising high drug loading capacity (∼69 wt %); (ii) dual-stimuli responsive drug release, triggered by acidic pH and NIR laser irradiation; (iii) infrared thermal (IRT), photoacoustic (PA) and X-ray computed tomography (CT) trimodality imaging with the CT contrast enhanced efficiency as high as ∼66.7 HU·mL·mg^-1; (iv) 100% tumor elimination through the combination chemo-photothermal therapy. Our work highlights the great potentials of Bi-BSA NRs as a versatile theranostics for multimodal imaging and combination therapy.

Soft conductive micropillar electrode arrays for biologically relevant electrophysiological recording

Multielectrode arrays (MEAs) are essential tools in neural and cardiac research as they provide a means for noninvasive, multiplexed recording of extracellular field potentials with high temporal resolution. To date, the mechanical properties of the electrode material, e.g., its Young's modulus, have not been taken into consideration in most MEA designs leaving hard materials as the default choice due to their established fabrication processes. However, the cell-electrode interface is known to significantly affect some aspects of the cell's behavior. In this paper, we describe the fabrication of a soft 3D micropillar electrode array. Using this array, we proceed to successfully record action potentials from monolayer cell cultures. Specifically, our conductive hydrogel micropillar electrode showed improved signal amplitude and signal-to-noise ratio, compared with conventional hard iridium oxide micropillar electrodes of the same diameter. Taken together, our fabricated soft micropillar electrode array will provide a tissue-like Young's modulus and thus a relevant mechanical microenvironment to fundamental cardiac and neural studies.

Microsphere-Based Nanoindentation for the Monitoring of Cellular Cortical Stiffness Regulated by MT1-MMP

Biophysical properties are intimately connected to metastatic functions and aggressiveness in cancers. Especially, cellular stiffness is regarded as a biomarker for the understanding of metastatic potential and drug sensitivity. Here, protease-mediated changes of cortical stiffness are identified due to the deformation of cytoskeleton alignment at a cortex. For the past few decades, membrane type 1-matrix metalloproteinase (MT1-MMP) has been well known as a kernel protease enriched in podosomes during metastasis for extracellular matrix degradation. However, the biophysical significance of MT1-MMP expressing cancer cells is still unknown. Therefore, the nanomechanics of cancer cells is analyzed by a nanoindentation using a microsphere-attached cantilever of atomic force microscopy (AFM). In conclusion, the results suggest that MT1-MMP has contributed as a key regulator in cytoskeletal deformation related with cancer metastasis. Particularly, the AFM-based nanoindentation system for the monitoring of cortical nanomechanics will be crucial to understand molecular networks in cancers.

Natural killer cells' immune response requires a minimal nanoscale distribution of activating antigens

NK cells recognize cancer and viral cells by binding their activating receptors to antigens presenting on the membrane of target cells. Although the activation mechanism of NK cells is a subject of extensive research today, the role of the composition and spatial distribution of activating ligands in NK cell cytotoxicity is barely understood. In this work, we engineered a nanochip whose surface was patterned with matrices of antigens for NKG2D activating receptors. These matrices mimicked the spatial order of the surface of antigen presenting cells with molecular resolution. Using this chip, we elucidated the effect of the antigen spatial distribution on the NK cell spreading and immune activation. We found that the spatial distribution of the ligand within the 100 nm length-scale provides the minimal conditions for NKG2D regulated cell spreading. Furthermore, we found that the immune activation of NK cells requires the same minimal spatial distribution of activating ligands. Above this threshold, both spreading and activation plateaued, confirming that these two cell functions work hand in hand. Our study provides an important insight on the spatial mechanism of the cytotoxic activity of NK cells. This insight opens the way to rationally designed antitumor therapies that harness NK cytotoxicity.

Biomechano-Interactive Materials and Interfaces

The reciprocal mechanical interaction of engineered materials with biointerfaces have long been observed and exploited in biomedical applications. It contributes to the rise of biomechano-responsive materials and biomechano-stimulatory materials, constituting the biomechano-interactive interfaces. Here, endogenous and exogenous biomechanical stimuli available for mechanoresponsive interfaces are briefed and their mechanistic responses, including deformation and volume change, mechanomanipulation of physical and chemical bonds, dissociation of assemblies, and coupling with thermoresponsiveness are summarized. The mechanostimulatory materials, however, are capable of delivering mechanical cues, including stiffness, viscoelasticity, geometrical constraints, and mechanical loads, to modulate physiological and pathological behaviors of living tissues through the adaptive cellular mechanotransduction. The biomechano-interactive materials and interfaces are widely implemented in such fields as mechanotriggered therapeutics and diagnosis, adaptive biophysical sensors, biointegrated soft actuators, and mechanorobust tissue engineering, which have offered unprecedented opportunities for precision and personalized medicine. Pending challenges are also addressed to shed a light on future advances with respect to translational implementations.

High Aspect Ratio Nanostructures Kill Bacteria via Storage and Release of Mechanical Energy

The threat of a global rise in the number of untreatable infections caused by antibiotic-resistant bacteria calls for the design and fabrication of a new generation of bactericidal materials. Here, we report a concept for the design of antibacterial surfaces, whereby cell death results from the ability of the nanofeatures to deflect when in contact with attaching cells. We show, using three-dimensional transmission electron microscopy, that the exceptionally high aspect ratio (100-3000) of vertically aligned carbon nanotubes (VACNTs) imparts extreme flexibility, which enhances the elastic energy storage in CNTs as they bend in contact with bacteria. Our experimental and theoretical analyses demonstrate that, for high aspect ratio structures, the bending energy stored in the CNTs is a substantial factor for the physical rupturing of both Gram-positive and Gram-negative bacteria. The highest bactericidal rates (99.3% for Pseudomonas aeruginosa and 84.9% for Staphylococcus aureus) were obtained by modifying the length of the VACNTs, allowing us to identify the optimal substratum properties to kill different types of bacteria efficiently. This work highlights that the bactericidal activity of high aspect ratio nanofeatures can outperform both natural bactericidal surfaces and other synthetic nanostructured multifunctional surfaces reported in previous studies. The present systems exhibit the highest bactericidal activity of a CNT-based substratum against a Gram-negative bacterium reported to date, suggesting the possibility of achieving close to 100% bacterial inactivation on VACNT-based substrata.

Utilizing Intramolecular Photoinduced Electron Transfer to Enhance Photothermal Tumor Treatment of Aza-BODIPY-Based Near-Infrared Nanoparticles

Photothermal therapy (PTT) as a kind of noninvasive tumor treatment has attracted increasing research interest. However, the efficiency of existing PTT agents in the near-infrared (NIR) region is the major problem that has hindered further development of PTT. Herein, we present an effective strategy to construct the efficient photothermal agent by utilizing an intramolecular photoinduced electron transfer (PeT) mechanism, which is able to dramatically improve photothermal conversion efficiency in the NIR region. Specifically, an NIR dye (A1) constructed with dimethylamine moiety as the electron donor and the aza-BODIPY core as the electron acceptor is designed and synthesized, which can be used as a class of imaging-guided PTT agents via intramolecular PeT. After encapsulation with biodegradable polymer DSPE-mPEG₅₀₀₀, nanophotothermal agents with a small size exhibit excellent water solubility, photostability, and long-time retention in tumor. Importantly, such nanoparticles exhibit excellent photothermal conversion efficiency of ∼35.0%, and the PTT effect in vivo still remains very well even with a low dosage of 0.05 mg kg^-1 upon 808 nm NIR laser irradiation (0.5 W cm^-2). Therefore, this reasonable design via intramolecular PeT offers guidance to construct excellent photothermal agents and subsequently may provide a novel opportunity for future clinical cancer treatment.

Vapor-Phase Nanopatterning of Aminosilanes with Electron Beam Lithography: Understanding and Minimizing Background Functionalization

Electron beam lithography (EBL) is a highly precise, serial method for patterning surfaces. Positive tone EBL resists enable patterned exposure of the underlying surface, which can be subsequently functionalized for the application of interest. In the case of widely used native oxide-capped silicon surfaces, coupling an activated silane with electron beam lithography would enable nanoscale chemical patterning of the exposed regions. Aminoalkoxysilanes are extremely useful due to their reactive amino functionality but have seen little attention for nanopatterning silicon surfaces with an EBL resist due to background contamination. In this work, we investigated three commercial positive tone EBL resists, PMMA (950k and 495k) and ZEP520A (57k), as templates for vapor-phase patterning of two commonly used aminoalkoxysilanes, 3-aminopropyltrimethoxysilane (APTMS) and 3-aminopropyldiisopropylethoxysilane (APDIPES). The PMMA resists were susceptible to significant background reaction within unpatterned areas, a problem that was particularly acute with APTMS. On the other hand, with both APTMS and APDIPES exposure, unpatterned regions of silicon covered by the ZEP520A resist emerged pristine, as shown both with SEM images of the surfaces of the underlying silicon and through the lack of electrostatically driven binding of negatively charged gold nanoparticles. The ZEP520A resist allowed for the highly selective deposition of these alkoxyaminosilanes in the exposed areas, leaving the unpatterned areas clean, a claim also supported by contact angle measurements with four probe liquids and X-ray photoelectron spectroscopy (XPS). We investigated the mechanistic reasons for the stark contrast between the PMMA resists and ZEP520A, and it was found that the efficacy of resist removal appeared to be the critical factor in reducing the background functionalization. Differences in the molecular weight of the PMMA resists and the resulting influence on APTMS diffusion through the resist films are unlikely to have a significant impact. Area-selective nanopatterning of 15 nm gold nanoparticles using the ZEP520A resist was demonstrated, with no observable background conjugation noted in the unexposed areas on the silicon surface by SEM.

Mechano-Based Transductive Sensing for Wearable Healthcare

Wearable healthcare presents exciting opportunities for continuous, real-time, and noninvasive monitoring of health status. Even though electrochemical and optical sensing have already made great advances, there is still an urgent demand for alternative signal transformation in terms of miniaturization, wearability, conformability, and stretchability. Mechano-based transductive sensing, referred to the efficient transformation of biosignals into measureable mechanical signals, is claimed to exhibit the aforementioned desirable properties, and ultrasensitivity. In this Concept, a focus on pressure, strain, deflection, and swelling transductive principles based on micro-/nanostructures for wearable healthcare is presented. Special attention is paid to biophysical sensors based on pressure/strain, and biochemical sensors based on microfluidic pressure, microcantilever, and photonic crystals. There are still many challenges to be confronted in terms of sample collection, miniaturization, and wireless data readout. With continuing efforts toward solving those problems, it is anticipated that mechano-based transduction will provide an accessible route for multimode wearable healthcare systems integrated with physical, electrophysiological, and biochemical sensors.

Hierarchically Self-Assembled Supramolecular Host-Guest Delivery System for Drug Resistant Cancer Therapy

In this report, a new star-like copolymer β-CD- g-(PNIPAAm- b-POEGA) _x, consisting of a β-CD core, grafted with temperature-responsive poly( N-isopropylacrylamide) (PNIPAAm) and biocompatible poly(oligo(ethylene glycol) acrylate) (POEGA) in a block copolymer of the arms, was used to deliver chemotherapeutics to drug resistant cancer cells and tumors. The first step of the self-assembly process involves the encapsulation of chemotherapeutics through host-guest inclusion complexation between the β-cyclodextrin cavity and the anticancer drug. Next, the chain interaction of the PNIPAAm segment at elevated temperature drives the drug-loaded β-CD- g-(PNIPAAm- b-POEGA) _x/PTX inclusion complex to hierarchically self-assemble into nanosized supramolecular assemblies at 37 °C, whereas the presence of poly(ethylene glycol) (PEG) chains in the distal end of the star-like copolymer arms impart enhanced stability to the self-assembled structure. More interestingly, this supramolecular host-guest nanocomplex promoted the enhanced cellular uptake of chemotherapeutics in MDR-1 up-regulated drug resistant cancer cells and exhibited high therapeutic efficacy for suppressing drug resistant tumor growth in an in vivo mouse model, due to the increased stability, improvement in aqueous solubility, enhanced cellular uptake, and partial membrane pump impairment by taking the advantage of PEGylation and supramolecular complex between this star-like copolymer and chemotherapeutics. This work signifies that temperature-sensitive PEGylated supramolecular nanocarriers with good biocompatibility are effective in combating MDR-1 mediated drug resistance in both in vitro and in vivo models, which is of significant importance for the advanced drug delivery platform designed to combat drug resistant cancer.

Constructing a Multiplexed DNA Pattern by Combining Precise Magnetic Manipulation and DNA-Driven Assembly

There is an urgent demand to construct multiplexed biomolecular patterns to obtain more biological information from a single experiment. However, with only limited reports focusing on defective top-down approaches, challenges remain to develop a bottom-up strategy for multiplexed patterning. To this end, a novel strategy has been proposed to fabricate multiplexed DNA patterns via macroscopic assembly through combined precise magnetic manipulation and DNA hybridization-driven self-assembly. Therefore, a multiplexed DNA pattern composed of glass fibers loaded with multiple specific strands of DNA was constructed, and its potential application in simultaneous detection of multiplex target DNA was demonstrated. Moreover, the fabricated multiplexed DNA pattern shows an erasable behavior because the hybridized DNA can be disassembled by strand displacement.

Gradient Material Strategies for Hydrogel Optimization in Tissue Engineering Applications

Although a number of combinatorial/high-throughput approaches have been developed for biomaterial hydrogel optimization, a gradient sample approach is particularly well suited to identify hydrogel property thresholds that alter cellular behavior in response to interacting with the hydrogel due to reduced variation in material preparation and the ability to screen biological response over a range instead of discrete samples each containing only one condition. This review highlights recent work on cell-hydrogel interactions using a gradient material sample approach. Fabrication strategies for composition, material and mechanical property, and bioactive signaling gradient hydrogels that can be used to examine cell-hydrogel interactions will be discussed. The effects of gradients in hydrogel samples on cellular adhesion, migration, proliferation, and differentiation will then be examined, providing an assessment of the current state of the field and the potential of wider use of the gradient sample approach to accelerate our understanding of matrices on cellular behavior.

Electrospun Pectin-Polyhydroxybutyrate Nanofibers for Retinal Tissue Engineering

Natural polysaccharide pectin has for the first time been grafted with polyhydroxybutyrate (PHB) via ring-opening polymerization of β-butyrolactone. This copolymer, pectin-polyhydroxybutyrate (pec-PHB), was blended with PHB in various proportions and electrospun to produce nanofibers that exhibited uniform and bead-free nanostructures, suggesting the miscibility of PHB and pec-PHB. These nanofiber blends exhibited reduced fiber diameters from 499 to 336-426 nm and water contact angles from 123.8 to 88.2° on incorporation of pec-PHB. They also displayed 39-335% enhancement of elongation at break relative to pristine PHB nanofibers. pec-PHB nanofibers were found to be noncytotoxic and biocompatible. Human retinal pigmented epithelium (ARPE-19) cells were seeded onto pristine PHB and pec-PHB nanofibers as scaffold and showed good proliferation. Higher proportions of pec-PHB (pec-PHB10 and pec-PHB20) yielded higher densities of cells with similar characteristics to normal RPE cells. We propose, therefore, that nanofibers of pec-PHB have significant potential as retinal tissue engineering scaffold materials.

Nanomechanical Force Mapping of Restricted Cell-To-Cell Collisions Oscillating between Contraction and Relaxation

Contact-mediated cell migration strongly determines the invasiveness of the corresponding cells, collective migration, and morphogenesis. The quantitative study of cellular response upon contact relies on cell-to-cell collision, which rarely occurs in conventional cell culture. Herein, we developed a strategy to activate a robust cell-to-cell collision within smooth muscle cell pairs. Nanomechanical traction force mapping reveals that the collision process is promoted by the oscillatory modulations between contraction and relaxation and orientated by the filopodial bridge composed of nanosized contractile machinery. This strategy can enhance the occurrence of cell-to-cell collision, which renders it advantageous over traditional methods that utilize micropatterned coating to confine cell pairs. Furthermore, modulation of the balance between cell tugging force and traction force can determine the repolarization of cells and thus the direction of cell migration. Overall, our approach could help to reveal the mechanistic contribution in cell motility and provide insights in tissue engineering.

Cellular behavior controlled by bio-inspired and geometry-tunable nanohairs

A cicada wing has a biocidal feature of rupturing the membrane of cells, while the cactus spine can transmit a water drop to the stem of the plant. Both of these properties have evolved from their respective unique structures. Here, we endeavor to develop geometry-controllable nanohairs that mimic the cicada's wing-like vertical hairs and the cactus spine-like stooped hairs, and to quantitatively characterize the cell migration behavior of the hairy structures. It was found that the neuroblastoma cells are highly sensitive to the variation of surfaces: flat, vertical, and stooped nanohairs (100 nm diameter and 900 nm height). The cells on the vertical hairs showed significantly decreased proliferation. It was found that the behavior of cells cultured on stooped nanohairs is strongly influenced by the direction of the stooped pattern of hairs when we quantitatively measured the migration of cells on flat, vertical, and stooped structures. However, the cells on the flat structures showed random movement and the cells on the vertical nanohairs restricted the nanohair movement. Cells on the stooped structure showed higher forward migration preference compared to that of the other structures. Furthermore, we found that these cellular behaviors on the different patterns of nanohairs were affected by intracellular actin flament change. Consistent with these results, the vertical and stooped structures can facilitate the control of cell viability and guide directional migration for biomedical applications such as organogenesis.

Macroscopic supramolecular assembly to fabricate multiplexed DNA patterns for potential application in DNA chips

Macroscopic supramolecular assembly (MSA) is a newly established methodology to construct supramolecular materials directly from large building blocks. Demonstrations of MSA for various functions are urgently needed to advance MSA from fundamental studies to practical uses. Here we propose the fabrication of DNA microarrays by combining MSA and magnetic-assisted localization.

Overcoming STC2 mediated drug resistance through drug and gene co-delivery by PHB-PDMAEMA cationic polyester in liver cancer cells

Stanniocalcin 2 (STC2) overexpression in hepatocellular carcinoma (HCC) could lead to poor prognosis, which might be due to its induced P-glycoprotein and Bcl-2 protein expression level increase. P-glycoprotein or membrane pump induced drug efflux and altered prosurvival Bcl-2 expression are key mechanisms for drug resistance leading to failure of chemotherapy in HCC. However, current strategy to overcome both P-glycoprotein and Bcl-2 protein induced drug resistance was rarely reported. In this work, we utilized an amphiphilic poly[(R)-3-hydroxybutyrate] (PHB)-b-poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) cationic polyester to encapsulate chemotherapeutic paclitaxel (PTX) in hydrophobic PHB domain and Bcl-2 convertor Nur77/ΔDBD gene (Nur77 without DNA binding domain for mitochondria localization) by formation of polyplex due to cationic PDMAEMA segment, to effectively inhibit the drug resistant HepG2/STC2 and SMCC7721/STC2 liver cancer cell growth. Thanks to the cationic nanoparticle complex formation ability and high transfection efficiency to express Bcl-2 conversion proteins, PHB-PDMAEMA/PTX@polyplex could partially impair P-glycoprotein induced PTX efflux and activate the apoptotic function of previous prosurvival Bcl-2 protein. This is the pioneer report of cationic amphiphilic polyester PHB-PDMAEMA to codeliver anticancer drug and therapeutic plasmid to overcome both pump and non-pump mediated chemotherapeutic resistance in liver cancer cells, which might be inspiring for the application of polyester in personalized cancer therapy.

Orientational Coupling Locally Orchestrates a Cell Migration Pattern for Re-Epithelialization

Re-epithelialization by collective migration of epithelial cells over a heterogeneous environment to restore tissue integrity and functions is critical for development and regeneration. Here, it is reported that the spatial organization of adjacent adherent paths within sparsely distributed extracellular matrix (ECM) has a significant impact on the orientational coupling between cell polarization and collective cell migration. This coupling effect determines the migration pattern for human keratinocytes to regain their cohesion, which impacts the occupancy of epithelial bridge and the migration velocity in wound repair. Statistical studies suggest the converging organization of ECM, in which adjacent paths become closer to each other and finally converge to a junctional point, facilitating collective cell migration mostly within variable ECM organization, as the polarization of the advancing cell sheet is remodeled to align along the direction of cell migration. The findings may help to design implantable ECM to optimize efficient skin regeneration.

Nanomechanically Visualizing Drug-Cell Interaction at the Early Stage of Chemotherapy

A detailed understanding of chemotherapy is determined by the response of cell to the formation of the drug-target complex and its corresponding sudden or eventual cell death. However, visualization of this early but important process, encompassing the fast dynamics as well as complex network of molecular pathways, remains challenging. Herein, we report that the nanomechanical traction force is sensitive enough to reflect the early cellular response upon the addition of chemotherapeutical molecules in a real-time and noninvasive manner, due to interactions between chemotherapeutic drug and its cytoskeleton targets. This strategy has outperformed the traditional cell viability, cell cycle, cell impendence as well as intracellular protein analyses, in terms of fast response. Furthermore, by using the nanomechanical traction force as a nanoscale biophysical marker, we discover a cellular nanomechanical change upon drug treatment in a fast and sensitive manner. Overall, this approach could help to reveal the hidden mechanistic steps in chemotherapy and provide useful insights in drug screening.

Nanotopography featured polycaprolactone/polyethyleneoxide microfibers modulate endothelial cell response

Among many physical properties, surface nanotopography has been found to strongly affect cell adhesion, migration and other functions. Accurate biological interpretation requires the nanotopography to be presented in a three-dimensional (3D) micro-environment. Herein, immiscible blends of polycaprolactone (PCL)/polyethyleneoxide (PEO) were electrospun into a grounded coagulation bath, resulting in macroporous microfibers with nanotopography featured surfaces. Variations in PCL/PEO ratios enabled tunable surface nanotopographic structures, from longitudinal submicron grooves to transverse nano-lamellae. Chemical composition, crystallinity and quantitative nanomechanical analysis confirmed that the interplay of the two semi-crystalline immiscible polymers and the pairing of miscible solvents/non-solvents in both the electrospinning solution and the bath solution were critical for the formation of the secondary structure. It was found that the nanotopography features promoted the proliferation of human umbilical vein endothelial cells (HUVECs) compared with their smooth film counterparts. An analysis of the cell adhesion related markers, vinculin and phosphorylated focal adhesion kinase (pFAK), further revealed that the nanotopographies enhanced the nascent adhesion complex formation compared with smooth PCL fibers, even in the scaffolds with a high PEO content, which is often considered as a non-adhesive material.

3D printing for the design and fabrication of polymer-based gradient scaffolds

To accurately mimic the native tissue environment, tissue engineered scaffolds often need to have a highly controlled and varied display of three-dimensional (3D) architecture and geometrical cues. Additive manufacturing in tissue engineering has made possible the development of complex scaffolds that mimic the native tissue architectures. As such, architectural details that were previously unattainable or irreproducible can now be incorporated in an ordered and organized approach, further advancing the structural and chemical cues delivered to cells interacting with the scaffold. This control over the environment has given engineers the ability to unlock cellular machinery that is highly dependent upon the intricate heterogeneous environment of native tissue. Recent research into the incorporation of physical and chemical gradients within scaffolds indicates that integrating these features improves the function of a tissue engineered construct. This review covers recent advances on techniques to incorporate gradients into polymer scaffolds through additive manufacturing and evaluate the success of these techniques. As covered here, to best replicate different tissue types, one must be cognizant of the vastly different types of manufacturing techniques available to create these gradient scaffolds. We review the various types of additive manufacturing techniques that can be leveraged to fabricate scaffolds with heterogeneous properties and discuss methods to successfully characterize them.

STATEMENT OF SIGNIFICANCE

Additive manufacturing techniques have given tissue engineers the ability to precisely recapitulate the native architecture present within tissue. In addition, these techniques can be leveraged to create scaffolds with both physical and chemical gradients. This work offers insight into several techniques that can be used to generate graded scaffolds, depending on the desired gradient. Furthermore, it outlines methods to determine if the designed gradient was achieved. This review will help to condense the abundance of information that has been published on the creation and characterization of gradient scaffolds and to provide a single review discussing both methods for manufacturing gradient scaffolds and evaluating the establishment of a gradient.

Programmable Nano-Bio Interfaces for Functional Biointegrated Devices

A large amount of evidence has demonstrated the revolutionary role of nanosystems in the screening and shielding of biological systems. The explosive development of interfacing bioentities with programmable nanomaterials has conveyed the intriguing concept of nano-bio interfaces. Here, recent advances in functional biointegrated devices through the precise programming of nano-bio interactions are outlined, especially with regard to the rational assembly of constituent nanomaterials on multiple dimension scales (e.g., nanoparticles, nanowires, layered nanomaterials, and 3D-architectured nanomaterials), in order to leverage their respective intrinsic merits for different functions. Emerging nanotechnological strategies at nano-bio interfaces are also highlighted, such as multimodal diagnosis or "theragnostics", synergistic and sequential therapeutics delivery, and stretchable and flexible nanoelectronic devices, and their implementation into a broad range of biointegrated devices (e.g., implantable, minimally invasive, and wearable devices). When utilized as functional modules of biointegrated devices, these programmable nano-bio interfaces will open up a new chapter for precision nanomedicine.

Bioinspired Mechano-Sensitive Macroporous Ceramic Sponge for Logical Drug and Cell Delivery

On-demand, ultrahigh precision delivery of molecules and cells assisted by scaffold is a pivotal theme in the field of controlled release, but it remains extremely challenging for ceramic-based macroporous scaffolds that are prevalently used in regenerative medicine. Sea sponges (Phylum Porifera), whose bodies possess hierarchical pores or channels and organic/inorganic composite structures, can delicately control water intake/circulation and therefore achieve high precision mass transportation of food, oxygen, and wastes. Inspired by leuconoid sponge, in this study, the authors design and fabricate a biomimetic macroporous ceramic composite sponge (CCS) for high precision logic delivery of molecules and cells regulated by mechanical stimulus. The CCS reveals unique on-demand AND logic release behaviors in response to dual-gates of moisture and pressure (or strain) and, more importantly, 1 cm3 volume of CCS achieves unprecedentedly delivery precision of ≈100 ng per cycle for hydrophobic or hydrophilic molecules and ≈1400 cells per cycle for fibroblasts, respectively.

Micropatterned co-culture of cardiac myocytes on fibrous scaffolds for predictive screening of drug cardiotoxicities

The spatial arrangement of cardiac myocytes (CMs) and other non-myocytes scaffolds, closely resembling native tissue, is essential to control the CM morphology and function for cardiac tissue regeneration. In the current study, micropatterned fibrous scaffolds were developed to establish a CM co-culture system with cardiac fibroblasts (CFs) and endothelial cells (ECs) as a potential in vitro drug screening model. To pursue a biomimetic approach to influence CM behaviors, strip, oval and wave-patterned mats were constructed by deposition of electrospun fibers on lithographic collectors, followed by precise stacking for cell co-cultures. CMs, CFs, and ECs were located on the patterned scaffolds with controlled cellular distribution in the respective regions and no across condition was found. Compared with those after strip and oval-patterned co-culture, CMs co-cultured on wave-patterned scaffolds displayed significantly greater cell viabilities, larger cell elongation ratios, stronger expressions of cardiac-specific Troponin I, connexin 43 and sarcomeric α-actinin and higher beating rates during 15 days of incubation. The responses of co-cultured CMs to quinidine, erythromycin and sotalol show good correlations with clinical observations in the beating rate and the prolongation of the contraction and relaxation time. The in vivo safety data reflected well with the concentrations for 50% of maximal effect (EC₅₀) after drug treatment on co-cultured CMs, which was determined from the changes in the corrected field potential duration (FPDc) against the drug concentrations. During 15 days of patterned co-culture, the interbeat intervals and fluctuations of the CMs indicated quick changes in response to haloperidol treatment and sufficient restoration of the original beating profiles after drug removal. This study demonstrates the capabilities of micropatterned co-culture of CMs to establish the cardiac function as a reproducible and reliable platform for screening cardiac side effects of drugs.

Engineering a Cell Home for Stem Cell Homing and Accommodation

Distilling complexity to advance regenerative medicine from laboratory animals to humans, in situ regeneration will continue to evolve using biomaterial strategies to drive endogenous cells within the human body for therapeutic purposes; this approach avoids the need for delivering ex vivo-expanded cellular materials. Ensuring the recruitment of a significant number of reparative cells from an endogenous source to the site of interest is the first step toward achieving success. Subsequently, making the "cell home" cell-friendly by recapitulating the natural extracellular matrix (ECM) in terms of its chemistry, structure, dynamics, and function, and targeting specific aspects of the native stem cell niche (e.g., cell-ECM and cell-cell interactions) to program and steer the fates of those recruited stem cells play equally crucial roles in yielding a therapeutically regenerative solution. This review addresses the key aspects of material-guided cell homing and the engineering of novel biomaterials with desirable ECM composition, surface topography, biochemistry, and mechanical properties that can present both biochemical and physical cues required for in situ tissue regeneration. This growing body of knowledge will likely become a design basis for the development of regenerative biomaterials for, but not limited to, future in situ tissue engineering and regeneration.

Supramolecular cyclodextrin nanocarriers for chemo- and gene therapy towards the effective treatment of drug resistant cancers

A tumor active targeting β-cyclodextrin based nanocarrier β-NC-OEI-SS-FA was designed by the modification of star shaped cationic derivatives β-NC-OEI with folic acid through a disulfide bond, to co-deliver chemotherapeutic paclitaxel and the Nur77 gene for overcoming Bcl-2 mediated non-pump resistance by an "enemy to friend" strategy for potential drug resistant cancer therapy.