Fabrication and Mechanical Properties of Engineered Protein-Based Adhesives and Fibers

Halogen-Atom-Substituted DOPA with Enhanced Wet Adhesion and Antioxidization Ability

3,4-Dihydroxyphenylalanine (DOPA) has inspired the development of artificial adhesives, but efforts to enhance its adhesion strength and durability continue to evolve. However, it is tough work to improve DOPA wet adhesion by chemically decorating DOPA itself, despite the potential benefit of a concise and high-quality adhesion unit. Here, we synthesized a series of DOPA substituents by introducing different electron-withdrawing groups at the ortho position of the phenyl ring. This modification allowed us to effectively control the adhesion and antioxidation properties of DOPA. Combining atomic force microscopy (AFM)-based single-molecule force spectroscopy (SFMS) and cyclic voltammetry, we comprehensively investigated DOPA's antioxidation and adhesion capabilities. We found that adding a chlorine or bromine atom to the catechol ring significantly increases the DOPA wet adhesion strength. Additionally, halogen-substituted DOPA exhibited greater stability than dopamine in liquid solutions. Notably, chlorine-substituted DOPA maintained a strong adhesion ability even in salt water, offering potential benefits for bioadhesive applications.

Silver nanoparticle-loaded konjac glucomannan/silk fibroin composite hydrogels for enhanced wound healing

Hydrogel dressings with good biocompatibility and extracellular matrix mimetic structure are important for the treatment of skin wounds. In this study, antimicrobial silver nanoparticles (Ag NPs) loaded with konjac glucomannan and silk fibroin (KGM/SF) composite hydrogel were used as a dressing for wound healing. The uniform distribution of Ag NPs on the surface of the hydrogels imparts excellent antibacterial properties to KGM/SF composite hydrogels. Furthermore, the incorporation of Ag NPs into KGM/SF composite hydrogels does not induce significant hemolysis, there by meeting the standards for wound dressings and exhibiting favorable biocompatibility. In addition, the SF distribution of complex hydrogel dressings is rich in amino groups, thus providing excellent biocompatibility and comfort. The KGM/SF composite hydrogels possess a porous network structure, which endows them with excellent water retention and the capability to absorb wound exudate. Additionally, this unique structure creates and maintains an optimal moist environment that facilitates wound healing. The KGM/SF composite hydrogel dressing loaded with Ag NPs exhibits excellent hemostatic ability in the skin defect model, thereby facilitating angiogenesis, granulation tissue formation, and collagen accumulation to effectively promote wound healing.

Wet adhesives for hard tissues

The development of wet adhesives capable of bonding in aqueous environments, particularly for hard tissues such as bone, tooth, and cartilage, remains a significant challenge in material chemistry and biomedical research. Currently available hard tissue adhesives in clinical practice lack well-defined wet adhesion properties. Nature offers valuable inspiration through the adhesive mechanisms of marine organisms, advancing the design of bioinspired wet adhesives. Beyond biomimetic approaches, alternative strategies have emerged for the design of wet adhesives. This review systematically summarizes the current design strategies for wet adhesives, focusing on their applications to hard tissues. Then, the unique chemical, physical, mechanical, and biological requirements for wet adhesives applied to hard tissues are also discussed. The importance of understanding natural adhesion mechanisms and the need for high-performance materials that can meet the complex demands of hard tissue adhesion in a complex and delicate physiological microenvironment are highlighted. Finally, this review clarifies the future research directions that can further facilitate the clinical application of wet adhesives for hard tissues. STATEMENT OF SIGNIFICANCE: The significance of this review lies in its comprehensive analysis of wet adhesives for hard tissues, a field that has been largely overlooked despite its critical importance in biomedical applications. The insights gained from studying natural adhesives and the translation of these mechanisms into synthetic materials have the potential to revolutionize medical procedures involving hard tissue repair and regeneration. This review meticulously addresses the distinct challenges and specific requirements of hard tissue adhesives, providing an exhaustive roadmap for researchers striving to develop wet adhesives that can endure the demanding physiological conditions inside the human body. In doing so, it aims to facilitate the transition from laboratory findings to practical clinical applications.

Proteins for Hyperelastic Materials

Meticulous engineering and the yielded hyperelastic performance of structural proteins represent a new frontier in developing next-generation functional biomaterials. These materials exhibit outstanding and programmable mechanical properties, including elasticity, resilience, toughness, and active biological characteristics, such as degradability and tissue repairability, compared with their chemically synthetic counterparts. However, there are several critical issues regarding the preparation approaches of hyperelastic protein-based materials: limited natural sequence modules, non-hierarchical assembly, and imbalance between compressive and tensile elasticity, leading to unmet demands. Therefore, it is pivotal to develop an alternative strategy for biofabricating hyperelastic materials. Herein, the molecular design, engineering, and property regulation of hyperelastic structural proteins are overviewed. First, methodologies for deeper exploration of mechanical modules, including machine learning-aided de novo design, random mutations of natural sequences, and multiblock fusion techniques, are actively introduced. These methodologies facilitate the generation of elastomeric protein modules and demonstrate enhanced structural and functional versatility. Subsequently, assembly tactics of hyperelastic proteins (i.e., physical modulation, genetic adaptations, and chemical modifications) are reviewed, yielding hierarchically ordered structures. Finally, advances in biophysical techniques for more nuanced characterization of protein ensembles are discussed, unveiling the tuning mechanisms of protein elasticity across scales. Future developments in structural hyperelastic protein-based biomaterials are also envisioned.

Advances in meniscus tissue engineering: Towards bridging the gaps from bench to bedside

Meniscus is vital for maintaining the anatomical and functional integrity of knee. Injuries to meniscus, commonly caused by trauma or degenerative processes, can result in knee joint dysfunction and secondary osteoarthritis, while current conservative and surgical interventions for meniscus injuries bear suboptimal outcomes. In the past decade, there has been a significant focus on advancing meniscus tissue engineering, encompassing isolated scaffold strategies, biological augmentation, physical stimulus, and meniscus organoids, to improve the prognosis of meniscus injuries. Despite noteworthy promising preclinical results, translational gaps and inconsistencies in the therapeutic efficiency between preclinical and clinical studies exist. This review comprehensively outlines the developments in meniscus tissue engineering over the past decade (Scheme 1). Reasons for the discordant results between preclinical and clinical trials, as well as potential strategies to expedite the translation of bench-to-bedside approaches are analyzed and discussed.

Design Strategy, On-Demand Control, and Biomedical Engineering Applications of Wet Adhesion

The adhesion of tissues to external devices is fundamental to numerous critical applications in biomedical engineering, including tissue and organ repair, bioelectronic interfaces, adhesive robotics, wearable electronics, biomedical sensing and actuation, as well as medical monitoring, treatment, and healthcare. A key challenge in this context is that tissues are typically situated in aqueous and dynamic environments, which poses a bottleneck to further advancements in these fields. Wet adhesion technology (WAT) presents an effective solution to this issue. In this review, we summarize the three major design strategies and control methods of wet adhesion, comprehensively and systematically introducing the latest applications and advancements of WAT in the field of biomedical engineering. First, single adhesion mechanism under the frameworks of the three design strategies is systematically introduced. Second, control methods for adhesion are comprehensively summarized, including spatiotemporal control, detachment control, and reversible adhesion control. Third, a systematic summary and discussion of the latest applications of WAT in biomedical engineering research and education were presented, with a particular focus on innovative applications such as tissue-electronic interface devices, ingestible devices, end-effector components, in vivo medical microrobots, and medical instruments and equipment. Finally, opportunities and challenges encountered in the design and development of wet adhesives with advanced adhesive performance and application prospects are discussed.

Nanofilament organization in highly tough fibers based on lamin proteins

The escalating plastic pollution crisis necessitates sustainable alternatives, and one promising solution involves replacing petroleum-based polymers with fibrous proteins. This study focused on the recombinant production of intracellular fibrous proteins, specifically Caenorhabditis elegans lamin (Ce-lamin). Ce-lamins spontaneously organize within the cell nucleus, forming a network of nanofilaments. This intricate structure serves as an active layer that responds dynamically to mechanical strain and stress. Herein, we investigated the arrangement of nanofilaments into nanofibrils within wet-spun Ce-lamin fibers using alcoholic solutions as coagulants. Our goal was to understand their structural and mechanical properties, particularly in comparison with those produced with solutions containing Ca+2 ions, which typically result in the formation of nanofibrils with a collagen-like pattern. The introduction of ethanol solutions significantly altered this pattern, likely through rearrangement of the nanofilaments. Nevertheless, the resulting fibers exhibited superior toughness and strain, outperforming various synthetic fibers. The significance of the nanofilament structure in enhancing fiber toughness was emphasized through both the secondary structure transition during stretching and the influence of the Q159K point mutation. This study improves our understanding of the structural and mechanical aspects of Ce-lamin fibers, paving the way for the development of eco-friendly and high-quality fibers suitable for various applications, including medical implants and composite materials.

Breaking the boundaries of wound closure: A novel polyurethane tissue adhesive with enhanced healing properties

Over the past few decades, there have been advancements in the development of high-performance tissue adhesives as alternatives to traditional sutures and staples for rapid and effective wound closure post-surgery. While tissue adhesives offer advantages such as ease of use, short application time, and minimal tissue damage, they also face challenges related to biocompatibility, biodegradability, and adhesive strength. In this study, L-lysine diisocyanate (LDI) and trimethylolpropane (TMP) were utilized as the primary raw materials to produce a prepolymer terminated with NCO, resulting in the development of a new biocompatible polyurethane tissue adhesive (TMP-LDI). Additionally, SiO2 nanoparticles were incorporated into the prepolymer, significantly enhancing the adhesive strength of the TMP-LDI tissue adhesive through the "nanobridging effect," achieving a strength of 170.4 kPa. Furthermore, the SiO2/TMP-LDI tissue adhesive exhibited satisfactory temperature change during curing and degradation performance. In vitro and in vivo studies demonstrated that SiO2/TMP-LDI exhibited good biocompatibility, efficient hemostasis, antimicrobial properties, and the ability to promote wound healing. This research presents a novel approach for the development of tissue adhesives with superior adhesive performance.

Halogen-Bonding Nanoarchitectonics in Supramolecular Plasticizers for Breaking the Trade-Off between Ion Transport and Mechanical Strength of Polymer Electrolytes for High-Voltage Li-Metal Batteries

The low ionic conductivity of poly(ethylene oxide) (PEO)-based polymer electrolytes at room temperature impedes their practical applications. The addition of a plasticizer into polymer electrolytes could significantly promote ion transport while inevitably decreasing their mechanical strength. Herein, we report a supramolecular plasticizer (SMP) to break the trade-off effect between ionic conductivity and mechanical properties in PEO-based polymer electrolytes. Accordingly, the SMP is constructed by tetraethylene glycol dimethyl ether (G4) and SbF3 through halogen bonds. The SMP-plasticized PEO electrolyte (PEO/SMP) presents a simultaneously enhanced ionic conductivity of 2.4 × 10-4 S cm-1 (25 °C) and a high mechanical strength of 8.1 MPa, compared to those of pristine PEO-based electrolytes. Benefiting from the halogen bonds between G4 and SbF3, the Li-O coordination in PEO/SMP is evidently weakened, and thus rapid Li+ transport is achieved. Furthermore, the PEO/SMP electrolyte possesses a wide electrochemical stability window of 4.5 V and, importantly, derives an inorganic-rich SEI with a low interfacial resistance on a lithium metal surface. By using PEO/SMP, the lithium-metal battery with the LiNi0.5Co0.2Mn0.3O2 cathode exhibits a good rate and long-term cycling performance with a capacity retention of 75.3% (500 cycles). This work offers a rational guideline for the design of polymer electrolytes suitable for high-performance lithium-metal batteries.

Modifying Naturally Occurring, Nonmammalian-Sourced Biopolymers for Biomedical Applications

Natural biopolymers have a rich history, with many uses across the fields of healthcare and medicine, including formulations for wound dressings, surgical implants, tissue culture substrates, and drug delivery vehicles. Yet, synthetic-based materials have been more successful in translation due to precise control and regulation achievable during manufacturing. However, there is a renewed interest in natural biopolymers, which offer a diverse landscape of architecture, sustainable sourcing, functional groups, and properties that synthetic counterparts cannot fully replicate as processing and sourcing of these materials has improved. Proteins and polysaccharides derived from various sources (crustaceans, plants, insects, etc.) are highlighted in this review. We discuss the common types of polysaccharide and protein biopolymers used in healthcare and medicine, highlighting methods and strategies to alter structures and intra- and interchain interactions to engineer specific functions, products, or materials. We focus on biopolymers obtained from natural, nonmammalian sources, including silk fibroins, alginates, chitosans, chitins, mucins, keratins, and resilins, while discussing strategies to improve upon their innate properties and sourcing standardization to expand their clinical uses and relevance. Emphasis will be placed on methods that preserve the structural integrity and native biological functions of the biopolymers and their makers. We will conclude by discussing the untapped potential of new technologies to manipulate native biopolymers while controlling their secondary and tertiary structures, offering a perspective on advancing biopolymer utility in novel applications within biomedical engineering, advanced manufacturing, and tissue engineering.

Recombinant humanized type III collagen inhibits ovarian cancer and induces protective anti-tumor immunity by regulating autophagy through GSTP1

Ovarian cancer (OC) is one of the leading causes of death from malignancy in women and lacks safe and efficient treatment. The novel biomaterial, recombinant humanized collagen type III (rhCOLIII), has been reported to have various biological functions, but its role in OC is unclear. This study aimed to reveal the function and mechanism of action of rhCOLIII in OC. We developed an injectable recombinant human collagen (rhCOL)-derived material with a molecular weight of 45 kDa, with a stable triple helix structure, high biocompatibility, water solubility and biosafety. The anti-tumor activity of rhCOLIII was comprehensively evaluated through in vitro and in vivo experiments. In vitro, our results showed that rhCOLIII inhibited the proliferation, migration, and invasion of ovarian cancer cells (OCCs), and induced apoptosis. In addition, rhCOLIII not only inhibited autophagy of OCCs but also increased the expression of MHC-1 molecule within OCCs. To further elucidate the mechanism of rhCOLIII in OC, we conducted joint analysis of RNA-Seq and proteomics, and found that rhCOLIII exerted anti-tumor function and autophagy inhibition by downregulating Glutathione S-transferase P1 (GSTP1). Furthermore, various rescue experiments were designed to demonstrate that rhCOLIII suppressed autophagy and proliferation of OCCs by mediating GSTP1. In vivo, we found that rhCOLIII could inhibit tumor growth and promote CD8+ T cell infiltration. Our results indicate that rhCOLIII has great anti-tumor potential activity in OC, and induces protective anti-tumor immunity by regulating autophagy through GSTP1. These findings illustrate the potential therapeutic prospects of rhCOLIII for OC treatment.

Stabilization of Fish Protein-Based Adhesive by Reduction of Its Hygroscopicity

Protein-based fish adhesives have historically been used in various bonding applications; however, due to the protein's high affinity for water absorption, these adhesives become destabilized in high-moisture environments, resulting in reduced bondline strength and early failure. This limitation makes them unsuitable for industrial applications with higher demands. To address this issue, water-insoluble raw powder materials such as iron, copper, or zeolite were incorporated into natural fish adhesives. In this study, the hygroscopicity, dry matter content, thermal analysis (TGA/DSC), FT-IR spectroscopy, surface tension measurements, vapour permeability, and scanning electron microscope (SEM) of the modified adhesives were determined. In addition, the bonding properties of the modified adhesives were evaluated by the tensile shear strength of the lap joints, and mould growth was visually inspected. The resulting modified protein-based adhesives demonstrated improved stability in high humidity environments. Enhancing the hygroscopic properties of protein-based fish adhesives has the potential to unlock new opportunities and applications, providing a healthier and more environmentally sustainable alternative to petroleum-based adhesives.

Sterically Hindered Oleogel-Based Underwater Adhesive Enabled by Mesh-Tailoring Strategy

Underwater adhesives hold significant relevance in daily life and numerous industrial applications. Despite considerable efforts, developing scalable, high-performance underwater adhesives through a simple and effective method remains a formidable challenge. This study presents a novel mesh-tailoring strategy for in situ, rapid, and ultrastrong oleogel-based underwater adhesives (OUA), which comprises a highly crosslinked polyurethane network with a matching mesh size (≈2.22 nm) that precisely entraps bio-based epoxidized soybean oil (ESO) molecules (≈2.31 nm) by steric hindrance effect. This oleogel exhibits unprecedented robust mechanical properties (≈35 MPa) and maintains stability under extreme conditions, including high temperatures (100 °C), high pressures (30 MPa), and immersion in various solvents (water, ethanol, or ESO). In particular, this oleogel displays high hydrophobicity, rapid curing, and strong interface affinity, resulting in ultrahigh underwater adhesion strength (up to 2.13 MPa) and exceptional substrate universality. Moreover, the remarkable environmental adaptability and stability of OUA enable its use in harsh aqueous environments, including acidic/alkaline, saline, and extreme temperature solutions. The comprehensive capabilities of the OUA underscore its potential for building underwater structures, repairing leaky containers, and sealing broken submarine pipelines. This research establishes the foundation for the designing of next-generation underwater adhesives and offers fresh perspectives for exploring oleogel-based materials.

Bridging Nature and Engineering: Protein-Derived Materials for Bio-Inspired Applications

The sophisticated, elegant protein-polymers designed by nature can serve as inspiration to redesign and biomanufacture protein-based materials using synthetic biology. Historically, petro-based polymeric materials have dominated industrial activities, consequently transforming our way of living. While this benefits humans, the fabrication and disposal of these materials causes environmental sustainability challenges. Fortunately, protein-based biopolymers can compete with and potentially surpass the performance of petro-based polymers because they can be biologically produced and degraded in an environmentally friendly fashion. This paper reviews four groups of protein-based polymers, including fibrous proteins (collagen, silk fibroin, fibrillin, and keratin), elastomeric proteins (elastin, resilin, and wheat glutenin), adhesive/matrix proteins (spongin and conchiolin), and cyanophycin. We discuss the connection between protein sequence, structure, function, and biomimetic applications. Protein engineering techniques, such as directed evolution and rational design, can be used to improve the functionality of natural protein-based materials. For example, the inclusion of specific protein domains, particularly those observed in structural proteins, such as silk and collagen, enables the creation of novel biomimetic materials with exceptional mechanical properties and adaptability. This review also discusses recent advancements in the production and application of new protein-based materials through the approach of synthetic biology combined biomimetics, providing insight for future research and development of cutting-edge bio-inspired products. Protein-based polymers that utilize nature's designs as a base, then modified by advancements at the intersection of biology and engineering, may provide mankind with more sustainable products.

Modular Protein Fibers with Outstanding High-Strength and Acid-Resistance Performance Mediated by Copper Ion Binding and Imine Networking

Engineered protein fibers are promising biomaterials with diverse applications due to their tunable protein structure and outstanding mechanical properties. However, it remains challenging at the molecular level to achieve satisfied mechanical properties and environmental tolerance simultaneously, especially under extreme acid conditions. Herein, the construction of artificial fibers comprising chimeric proteins made of rigid amyloid peptide and flexible cationic elastin-like protein (ELP) module is reported. The amyloid peptide readily assembles into highly organized β-sheet structures that can be further strengthened by the coordination of Cu2+, while the flexible ELP module allows the formation of imine-based crosslinking networks. These double networks synergistically enhance the mechanical properties of the fibers, leading to a high tensile strength and toughness, overwhelming many reported recombinant spidroin fibers. Notably, the coordination of Cu2+ with serine residues could stabilize β-sheet structures in the fibers under acidic conditions, which makes the fibers robust against acid, thus enabling their successful utilization in gastric perforation suturing. This work highlights the customization of double networks at the molecular level to create tailored high-performance protein fibers for various application scenarios.

Functional Amyloids: The Biomaterials of Tomorrow?

Functional amyloid (FAs), particularly the bacterial proteins CsgA and FapC, have many useful properties as biomaterials: high stability, efficient, and controllable formation of a single type of amyloid, easy availability as extracellular material in bacterial biofilm and flexible engineering to introduce new properties. CsgA in particular has already demonstrated its worth in hydrogels for stable gastrointestinal colonization and regenerative tissue engineering, cell-specific drug release, water-purification filters, and different biosensors. It also holds promise as catalytic amyloid; existing weak and unspecific activity can undoubtedly be improved by targeted engineering and benefit from the repetitive display of active sites on a surface. Unfortunately, FapC remains largely unexplored and no application is described so far. Since FapC shares many common features with CsgA, this opens the window to its development as a functional scaffold. The multiple imperfect repeats in CsgA and FapC form a platform to introduce novel properties, e.g., in connecting linkers of variable lengths. While exploitation of this potential is still at an early stage, particularly for FapC, a thorough understanding of their molecular properties will pave the way for multifunctional fibrils which can contribute toward solving many different societal challenges, ranging from CO2 fixation to hydrolysis of plastic nanoparticles.

Swim bladder-derived biomaterials: structures, compositions, properties, modifications, and biomedical applications

Animal-derived biomaterials have been extensively employed in clinical practice owing to their compositional and structural similarities with those of human tissues and organs, exhibiting good mechanical properties and biocompatibility, and extensive sources. However, there is an associated risk of infection with pathogenic microorganisms after the implantation of tissues from pigs, cattle, and other mammals in humans. Therefore, researchers have begun to explore the development of non-mammalian regenerative biomaterials. Among these is the swim bladder, a fish-derived biomaterial that is rapidly used in various fields of biomedicine because of its high collagen, elastin, and polysaccharide content. However, relevant reviews on the biomedical applications of swim bladders as effective biomaterials are lacking. Therefore, based on our previous research and in-depth understanding of this field, this review describes the structures and compositions, properties, and modifications of the swim bladder, with their direct (including soft tissue repair, dural repair, cardiovascular repair, and edible and pharmaceutical fish maw) and indirect applications (including extracted collagen peptides with smaller molecular weights, and collagen or gelatin with higher molecular weights used for hydrogels, and biological adhesives or glues) in the field of biomedicine in recent years. This review provides insights into the use of swim bladders as source of biomaterial; hence, it can aid biomedicine scholars by providing directions for advancements in this field.

Spidroin-mimetic Engineered Protein Fibers with High Toughness and Minimized Batch-to-batch Variations through β-sheets Co-assembly

Synthetic spidroin fibers have not yet attained the same level of toughness and stability as natural spider silks due to the complexity of composition and hierarchical structure. Particularly, understanding the intricate interactions between spidroin components in spider fiber is still elusive. Herein, we report modular design and preparation of spidroin-mimetic fibers composed of a conservative C-terminus spidroin module, two different natural β-sheets modules, and a non-spidroin random-coil module. The resulting fibers exhibit a toughness of ~200 MJ/m3, reaching the highest value among the reported artificial spider silks. The interactions between two components of recombinant spidroins facilitate the intermolecular co-assembly of β-sheets, thereby enhancing the mechanical strength and reducing batch-to-batch variability in the dual-component spidroin fibers. Additionally, the dual-component spidroin fibers offer potential applications in implantable or even edible devices. Therefore, our work presents a generic strategy to develop high-performance protein fibers for diverse translations in different scenarios.

Programmable adhesion and morphing of protein hydrogels for underwater robots

Soft robots capable of efficiently implementing tasks in fluid-immersed environments hold great promise for diverse applications. However, it remains challenging to achieve robotization that relies on dynamic underwater adhesion and morphing capability. Here we propose the construction of such robots with designer protein materials. Firstly, a resilin-like protein is complexed with polyoxometalate anions to form hydrogels that can rapidly switch between soft adhesive and stiff non-adhesive states in aqueous environments in response to small temperature variation. To realize remote control over dynamic adhesion and morphing, Fe3O4 nanoparticles are then integrated into the hydrogels to form soft robots with photothermal and magnetic responsiveness. These robots are demonstrated to undertake complex tasks including repairing artificial blood vessel, capturing and delivering multiple cargoes in water under cooperative control of infrared light and magnetic field. These findings pave an avenue for the creation of protein-based underwater robots with on-demand functionalities.

Genetically Engineered Protein-Based Bioadhesives with Programmable Material Properties

Silk-amyloid-mussel foot protein (SAM) hydrogels made from recombinant fusion proteins containing β-amyloid peptide, spider silk domain, and mussel foot protein (Mfp) are attractive bioadhesives as they display a unique combination of tunability, biocompatibility, bioabsorbability, strong cohesion, and underwater adhesion to a wide range of biological surfaces. To design tunable SAM hydrogels for tailored surgical repair applications, an understanding of the relationships between protein sequence and hydrogel properties is imperative. Here, we fabricated SAM hydrogels using fusion proteins of varying lengths of silk-amyloid repeats and Mfps to characterize their structure and properties. We found that increasing silk-amyloid repeats enhanced the hydrogel's β-sheet content (r = 0.74), leading to higher cohesive strength and toughness. Additionally, increasing the Mfp length beyond the half-length of the full Mfp sequence (1/2 Mfp) decreased the β-sheet content (r = -0.47), but increased hydrogel surface adhesion. Among different variants, the hydrogel made of 16xKLV-2Mfp displayed a high ultimate strength of 3.0 ± 0.3 MPa, an ultimate strain of 664 ± 119%, and an attractive underwater adhesivity of 416 ± 20 kPa to porcine skin. Collectively, the sequence-structure-property relationships learned from this study will be useful to guide the design of future protein adhesives with tunable characteristics for tailored surgical applications.

Protein fibers with self-recoverable mechanical properties via dynamic imine chemistry

The manipulation of internal interactions at the molecular level within biological fibers is of particular importance but challenging, severely limiting their tunability in macroscopic performances and applications. It thus becomes imperative to explore new approaches to enhance biological fibers' stability and environmental tolerance and to impart them with diverse functionalities, such as mechanical recoverability and stimulus-triggered responses. Herein, we develop a dynamic imine fiber chemistry (DIFC) approach to engineer molecular interactions to fabricate strong and tough protein fibers with recoverability and actuating behaviors. The resulting DIF fibers exhibit extraordinary mechanical performances, outperforming many recombinant silks and synthetic polymer fibers. Remarkably, impaired DIF fibers caused by fatigue or strong acid treatment are quickly recovered in water directed by the DIFC strategy. Reproducible mechanical performance is thus observed. The DIF fibers also exhibit exotic mechanical stability at extreme temperatures (e.g., -196 °C and 150 °C). When triggered by humidity, the DIFC endows the protein fibers with diverse actuation behaviors, such as self-folding, self-stretching, and self-contracting. Therefore, the established DIFC represents an alternative strategy to strengthen biological fibers and may pave the way for their high-tech applications.

Recombinant supercharged polypeptides for safe and efficient heparin neutralization

Heparin is a widely used anticoagulant agent in the clinic. After application, its anticoagulant effect must be reversed to prevent potential side effects. Protamine sulfate (PS) is the only clinically licensed antidote that has been used for this purpose in the last 80 years, which, however, provokes severe adverse effects, such as systemic hypotension and even death. Herein, we demonstrate the potential of supercharged polypeptides as a promising alternative for protamine sulfate. A series of supercharged polypeptides with multiple positive charges was recombinantly produced, and the heparin-neutralizing performance of the polypeptides was evaluated in comparison with PS. It was found that increasing the number of charges significantly enhanced the ability to neutralize heparin and resist the screening effect induced by salt. In particular, the polypeptide bearing 72 charges (K72) exhibited an excellent heparin-neutralizing behavior that was comparable to that of PS. Further in vivo studies revealed that the heparin-triggered bleeding was almost completely alleviated by K72 while a negligible toxic effect was observed. Therefore, such recombinant supercharged polypeptides might replace protamine sulfate as heparin-reversal agents.

Plant Protein-Peptide Supramolecular Polymers with Reliable Tissue Adhesion for Surgical Sealing

The fusion of protein science and peptide science opens up new frontiers in creating innovative biomaterials. Herein, a new kind of adhesive soft materials based on a natural occurring plant protein and short peptides via a simple co-assembly route are explored. The hydrophobic zein is supercharged by sodium dodecyl sulfate to form a stable protein colloid, which is intended to interact with charge-complementary short peptides via multivalent ionic and hydrogen bonds, forming adhesive materials at macroscopic level. The adhesion performance of the resulting soft materials can be fine-manipulated by customizing the peptide sequences. The adhesive materials can resist over 78 cmH2 O of bursting pressure, which is high enough to meet the sealing requirements of dural defect. Dural sealing and repairing capability of the protein-peptide biomaterials are further identified in rat and rabbit models. In vitro and in vivo assays demonstrate that the protein-peptide adhesive shows excellent anti-swelling property, low cell cytotoxicity, hemocompatibility, and inflammation response. In particular, the protein-peptide supramolecular biomaterials can in vivo dissociate and degrade within two weeks, which can well match with the time-window of the dural repairing. This work underscores the versatility and availability of the supramolecular toolbox in the easy-to-implement fabrication of protein-peptide biomaterials.

Mussel-inspired proteins functionalize catheter with antifouling and antibacterial properties

Bacterial adhesion and subsequent biofilm formation on catheter can cause inevitably infection. The development of multifunctional antibacterial coating is a promising strategy to resist the bacteria adhesion and biofilm formation. Herein, a mussel-inspired chimeric protein MZAgP is prepared and employed to modify a variety of polymeric catheters. The MZAgP is composed of mussel-adhesive peptide, zwitterionic peptide, and silver-binding peptide, which can endow catheters with antifouling, bactericidal and biocompatibility performances. Expectedly, negligible biofilm is observed on the MZAgP coated catheters after incubating with bacteria for 120 h. And ignorable hemolysis and cytotoxicity are obtained on coated catheters. In addition, the modified catheters also display persistent antifouling and bacteriostatic properties throughout 168 h under hydrodynamic conditions. Moreover, the coated catheters still remain excellent antifouling and antibacterial properties even after 2 months of storage. This multifunctional coating may be promising as antibacterial and antibiofilm material, and the coated catheters are potential in clinical application.

Bi-terminal fusion of intrinsically-disordered mussel foot protein fragments boosts mechanical strength for protein fibers

Microbially-synthesized protein-based materials are attractive replacements for petroleum-derived synthetic polymers. However, the high molecular weight, high repetitiveness, and highly-biased amino acid composition of high-performance protein-based materials have restricted their production and widespread use. Here we present a general strategy for enhancing both strength and toughness of low-molecular-weight protein-based materials by fusing intrinsically-disordered mussel foot protein fragments to their termini, thereby promoting end-to-end protein-protein interactions. We demonstrate that fibers of a ~60 kDa bi-terminally fused amyloid-silk protein exhibit ultimate tensile strength up to 481 ± 31 MPa and toughness of 179 ± 39 MJ*m^-3, while achieving a high titer of 8.0 ± 0.70 g/L by bioreactor production. We show that bi-terminal fusion of Mfp5 fragments significantly enhances the alignment of β-nanocrystals, and intermolecular interactions are promoted by cation-π and π-π interactions between terminal fragments. Our approach highlights the advantage of self-interacting intrinsically-disordered proteins in enhancing material mechanical properties and can be applied to a wide range of protein-based materials.

Multifunctional Dual Cross-Linked Bioadhesive Patch with Low Immunogenic Response and Wet Tissues Adhesion

The development of bioadhesives is an important, yet challenging task as seemingly mutually exclusive properties need to be combined in one material, that is, strong adhesion, water resistance, and high biocompatibility. Here, a biocompatible and biodegradable protein-based bioadhesive patch (PBP) with high adhesion strength and low immunogenic response is reported. PBP exists as a strong adhesion for biological surfaces, which is higher than some conventional bioadhesives (i.e., polyethylene glycol and fibrin). Robust adhesion and strength are realized through the removal of interfacial water and fast formation of multiple supramolecular interactions induced by metal ions. The PBP's high biocompatibility is evaluated and immunogenic response in vitro and in vivo is neglected. The strong adhesion on soft biological tissues qualifies the PBP as biomedical glue outperforming some commercial products for applications in hemostasis performance, accelerated wound healing, and sealing of defected organs, anticipating to be useful as a tissue adhesive and sealant.

Influence of Physical Modification of the Adhesive Composition on the Strength Properties of Aerospace Aluminum Alloy Sheet Adhesive Joints

One of the most important design factors in the constitution of adhesive joints is the correct choice of adhesive. Currently, there is a full range of options on the commercial market in this regard, but there is increasing research into modifying adhesives for specific engineering applications. The aim of this study was to analyze the effect of physical modification with fillers on the properties of the adhesive composition and the adhesive joints. The adhesives used in the study were a composition of Epidian 5 epoxy resin and PAC curing agent modified with 1% montmorillonite, 5% calcium carbonate and 20% activated carbon. The adhesive compositions in the cured state were subjected to strength tests and SEM and DSC analyses. Using these compositions, adhesive joints of EN AW 2024 T3 aluminum alloy sheets were also made. The tests carried out showed that, due to the use of different fillers, their effects on certain properties of the adhesive compositions are different types. It was shown that physical modification of the adhesive composition does not always result in positive effects. The study also attempted to determine the correlation between the properties of the adhesive compositions in the cured state and the strength of the adhesive joints.

Collagen Fiber-Based Advanced Separation Materials: Recent Developments and Future Perspectives

Separation plays a critical role in a broad range of industrial applications. Developing advanced separation materials is of great significance for the future development of separation technology. Collagen fibers (CFs), the typical structural proteins, exhibit unique structural hierarchy, amphiphilic wettability, and versatile chemical reactivity. These distinctive properties provide infinite possibilities for the rational design of advanced separation materials. During the past 2 decades, many progressive achievements in the development of CFs-derived advanced separation materials have been witnessed already. Herein, the CFs-based separation materials are focused on and the recent progresses in this topic are reviewed. CFs widely existing in animal skins display unique hierarchically fibrous structure, amphiphilicity-enabled surface wetting behaviors, multi-functionality guaranteed covalent/non-covalent reaction versatility. These outstanding merits of CFs bring great opportunities for realizing rational design of a variety of advanced separation materials that were capable of achieving high-performance separations to diverse specific targets, including oily pollutants, natural products, metal ions, anionic contaminants and proteins, etc. Besides, the important issues for the further development of CFs-based advanced separation materials are also discussed.

Construction of Wogonin Nanoparticle-Containing Strontium-Doped Nanoporous Structure on Titanium Surface to Promote Osteoporosis Fracture Repair

M2 polarization of macrophage is an important immunomodulatory event that attenuates inflammation. To regulate the immune microenvironment in osteoporotic conditions for enhancing bone healing, strontium-doped nano-structure is fabricated on the surface of titanium implant via microarc oxidation and electrochemical deposition technology, followed by the addition of multiplayer coatings embedded with silk fibroin-based wogonin nanoparticles (Ti-MAO/Sr/LBL_WNP ) by layer-by-layer self-assembly technique (LBL). It is found that Ti-MAO/Sr/LBL_WNP can release wogonin and Sr²⁺ in a sustainable manner for more than 7 and 21 days. In vitro studies show that Ti-MAO/Sr/LBL_WNP significantly upregulates the expression of CD206 while reducing the expression of CD86. Meanwhile, Ti-MAO/Sr/LBL_WNP can promote the expression level of M2 macrophage anti-inflammatory factor (TGF-β1, Arg-1), which improves the proliferation and osteogenic differentiation of osteoblasts through paracrine signaling. Compared to bare titanium, Ti-MAO/Sr/LBL_WNP significantly inhibits the expression of inflammatory factors around the implant and effectively promotes new bone formation at pre-implant interface after implantation for 4 weeks. This study provides a simple and effective method to develop functional titanium alloy materials for osteoporotic fracture repair.

Bio-macromolecular design roadmap towards tough bioadhesives

Emerging sutureless wound-closure techniques have led to paradigm shifts in wound management. State-of-the-art biomaterials offer biocompatible and biodegradable platforms enabling high cohesion (toughness) and adhesion for rapid bleeding control as well as robust attachment of implantable devices. Tough bioadhesion stems from the synergistic contributions of cohesive and adhesive interactions. This Review provides a biomacromolecular design roadmap for the development of tough adhesive surgical sealants. We discuss a library of materials and methods to introduce toughness and adhesion to biomaterials. Intrinsically tough and elastic polymers are leveraged primarily by introducing strong but dynamic inter- and intramolecular interactions either through polymer chain design or using crosslink regulating additives. In addition, many efforts have been made to promote underwater adhesion via covalent/noncovalent bonds, or through micro/macro-interlock mechanisms at the tissue interfaces. The materials settings and functional additives for this purpose and the related characterization methods are reviewed. Measurements and reporting needs for fair comparisons of different materials and their properties are discussed. Finally, future directions and further research opportunities for developing tough bioadhesive surgical sealants are highlighted.

Molecularly Engineered Protein Glues with Superior Adhesion Performance

Naturally inspired proteins are investigated for the development of bioglues that combine adhesion performance and biocompatibility for biomedical applications. However, engineering such adhesives by rational design of the proteins at the molecular level is rarely reported. Herein, it is shown that a new generation of protein-based glues is generated by supramolecular assembly through de novo designed structural proteins in which arginine triggers robust liquid-liquid phase separation. The encoded arginine moieties significantly strengthen multiple molecular interactions in the complex, leading to ultrastrong adhesion on various surfaces, outperforming many chemically reacted and biomimetic glues. Such adhesive materials enable quick visceral hemostasis in 10 s and outstanding tissue regeneration due to their robust adhesion, good biocompatibility, and superior antibacterial capacity. Remarkably, their minimum inhibitory concentrations are orders of magnitude lower than clinical antibiotics. These advances offer insights into molecular engineering of de novo designed protein glues and outline a general strategy to fabricate mechanically strong protein-based materials for surgical applications.

Nature-Derived Okra Gel as Strong Hemostatic Bioadhesive in Human Blood, Liver, and Heart Trauma of Rabbits and Dogs

Bioadhesive performance can be compromised due to bleeding. Bleeding increases mortality. Adhesives with hemostatic function are of great significance. A sustainable and robust hemostatic bioadhesive from okra is reported. The adhesive strength reaches around three and six-fold higher than commercial fibrin on pigskin and glass, respectively. The okra gel presents high-pressure resistance and great underwater adhesive strength. In human blood experiments, the okra gel can activate platelets, enhance the adhesion of activated platelets, and release coagulation factors XI and XII. By forming a fast gel layer and closely adhering to the wound, it can quickly stop bleeding in the liver and heart of rabbits and dogs. Meanwhile, okra gel can cause platelet activation at the wound site and further strengthen its hemostatic performance. It is biocompatible, biodegradable, and can promote wound healing and shows potential as a sustainable bioadhesive, especially in the scenario of significant hemorrhage.

A highly stretchable, UV resistant and underwater adhesive hydrogel based on xylan derivative for sensing

Hydrogels with fascinating adhesion have been demonstrated great potential in various applications. However, most hydrogels lose their adhesion in wet or underwater environments due to the influence of interfacial water. Inspired by mussel, an underwater adhesive hydrogel was facilely fabricated by introducing electrostatic interactions, which consisted of poly (acrylic acid) (PAA), quaternized xylan (QAX) and tannic acid (TA). In this hydrogel, -COO^- from PAA, -N⁺(CH₃)₃ from QAX and catechol group from TA resembled amino acids with negative and positive charges and 3,4-dihydroxyphenylalanine units in mussel, which endowed the hydrogels with great underwater adhesion through multiple interactions. Notably, acrylic acid (AA) played a key role in the dispersion of the system. QAX, a biomass derived from plants with excellent properties, worked with PAA to construct hydrogel networks. The resultant hydrogels exhibited excellent mechanical properties including remarkable stretchability (>4000 %) and compressibility. Moreover, the hydrogels had superior UV-blocking (~99.96 %), and showed good adhesion both in air and underwater. The hydrogels can be exploited as a wearable sensor to monitor human motions and even subtle motions, which have the potential to be explored in human health monitoring.

Tough Wet Adhesion of Hydrogen-Bond-Based Hydrogel with On-Demand Debonding and Efficient Hemostasis

Hydrogels have been widely used in wet tissues. However, the insufficient adhesion of hydrogels for wound hemostasis remains a grand challenge. Herein, a facile yet effective strategy is developed to fabricate tough wet adhesion of hydrogen-bond-based hydrogel (PAAcVI hydrogel) using copolymerization of acrylic acid and 1-vinylimidazole in dimethyl sulfoxide followed by solvent exchange with water. The PAAcVI hydrogel shows equally robust adhesion (>400 J m^-2) to both wet and dry tissues. Moreover, the PAAcVI hydrogel also exhibits strong long-term stable adhesion underwater and in various wet environments. Meanwhile, the adhesion of PAAcVI hydrogel can be adjusted through Zn²⁺-ion-mediated on-demand debonding, which makes it easy to peel off from the tissue reducing pain during dressing removal and avoiding secondary injury. The PAAcVI hydrogel displays efficient hemostasis in the mice-tail docking model and mice-liver bleeding model. This hydrogen-bond-based hydrogel shows tough wet adhesion, and its adhesion is controllable, demonstrating its promising application in moisture-resistant adhesives, medical adhesives, and hemostatic materials.

Emergence of Elastic Properties in a Minimalist Resilin-Derived Heptapeptide upon Bromination

Bromination is herein exploited to promote the emergence of elastic behavior in a short peptide-SDSYGAP-derived from resilin, a rubber-like protein exerting its role in the jumping and flight systems of insects. Elastic and resilient hydrogels are obtained, which also show self-healing behavior, thanks to the promoted non-covalent interactions that limit deformations and contribute to the structural recovery of the peptide-based hydrogel. In particular, halogen bonds may stabilize the β-sheet organization working as non-covalent cross-links between nearby peptide strands. Importantly, the unmodified peptide (i.e., wild type) does not show such properties. Thus, SDSY(3,5-Br)GAP is a novel minimalist peptide elastomer.

A smart hydrogel patch with high transparency, adhesiveness and hemostasis for all-round treatment and glucose monitoring of diabetic foot ulcers

The treatment and management of diabetic foot ulcers (DFUs) is a pretty intractable problem for clinical nursing. Urgently, the "Black Box" status of the healing process prevents surgeons from providing timely analysis for more effective diagnosis and therapy of the wound. Herein, we designed a transparent monitoring system to treat and manage the DFUs with blood oozing and hard-healing, which resolved the problem of blind management for the other conductive patches. This system was prepared from a conductive hydrogel patch with ultra-high transparence (up to 93.6%), adhesiveness and hemostasis, which is engineered by assembling in situ formed poly(tannic acid) (PTA)-doped polypyrrole (PPy) nanofibrils in the poly(acrylamide-acrylated adenine) (P(AM-Aa)) polymer networks. Significantly, the high transparent conductive hydrogel patch can monitor the wound-healing status visually and effectively promote the healing of DFUs by accelerating hemostasis, improving communication between cells, preventing wound infection, facilitating collagen deposition, and promoting angiogenesis. In addition, the versatile hydrogel patch could realize indirect blood glucose monitoring by detecting the glucose levels on wounds, and further sense the movements with different magnitudes of human body timely. This research may provide a novel strategy in the design of chronic wound dressings for monitoring and treating the wounds synergistically.

Synergistic enhancement on flexible solid-state supercapacitor based on redox-active Fe3+ions/natural spidroin modified vertically aligned carbon nanotube arrays

The conductive skeleton and aligned carbon nanotube array (CNTA) structure can greatly shorten the ion transfer path and promote the charge transfer speed, which makes the CNTA an ideal electrode material for energy storage application. However, poor mechanical stability and low specific capacitance greatly impede its practical utilization. Here, we introduce a promising flexible electrode material based on the natural spider silk protein (SSP) modified CNTA(SSP/CNTA) with improved hydrophilicity and mechanical flexibility. The redox-active Fe³⁺doped SSP/CNTA flexible solid-state supercapacitor (FSSC) device with superior energy storage performance was assembled in a symmetric 'sandwich-type' structure. The synergetic interaction between Fe³⁺ions and the SSP are proved to greatly enhance the electrochemical performance especially the long-term cyclic stability. The Fe³⁺doped SSP/CNTA FSSCs device achieves an ultra-high volumetric capacitance of 4.92 F cm^-3at a sweep speed of 1 mV s^-1. Meanwhile it exhibited an excellent cycling stability with an increased capacitance by 10% after 10 000 charge-discharge cycles. As a control, a Fe³⁺doped CNTA composite device without SSP will lose over 74% of the capacitance after 10 000 cycles. The energy storage mechanism analysis confirms the dominated capacitive behavior of the device, which explained a considerable power density and rate performance. Our method thus provides a promising strategy to build up highly-efficient redox-enhanced FSSCs for next generation of wearable and implantable electronics.

Extensible and self-recoverable proteinaceous materials derived from scallop byssal thread

Biologically derived and biologically inspired fibers with outstanding mechanical properties have found attractive technical applications across diverse fields. Despite recent advances, few fibers can simultaneously possess high-extensibility and self-recovery properties especially under wet conditions. Here, we report protein-based fibers made from recombinant scallop byssal proteins with outstanding extensibility and self-recovery properties. We initially investigated the mechanical properties of the native byssal thread taken from scallop Chlamys farreri and reveal its high extensibility (327 ± 32%) that outperforms most natural biological fibers. Combining transcriptome and proteomics, we select the most abundant scallop byssal protein type 5-2 (Sbp5-2) in the thread region, and produce a recombinant protein consisting of 7 tandem repeat motifs (rTRM7) of the Sbp5-2 protein. Applying an organic solvent-enabled drawing process, we produce bio-inspired extensible rTRM7 fiber with high-extensibility (234 ± 35%) and self-recovery capability in wet condition, recapitulating the hierarchical structure and mechanical properties of the native scallop byssal thread. We further show that the mechanical properties of rTRM7 fiber are highly regulated by hydrogen bonding and intermolecular crosslinking formed through disulfide bond and metal-carboxyl coordination. With its outstanding mechanical properties, rTRM7 fiber can also be seamlessly integrated with graphene to create motion sensors and electrophysiological signal transmission electrode.

Bio-inspired materials are an intense area of study as researchers try to adapt biomaterials for other applications. Here, the authors report on the processing of protein materials derived from the byssal thread of scallops to create high-extensibility materials with self-recovery under wet conditions.

Engineering High Strength and Super-Toughness of Unfolded Structural Proteins and their Extraordinary Anti-Adhesion Performance for Abdominal Hernia Repair

The utility of unfolded structural proteins with diverse sequences offers multiple potentials to create functional biomaterials. However, it is challenging to overcome their structural defects for the development of biological fibers with a combination of high strength and high toughness. Herein, robust fibers from a recombinant unfolded protein consisting of resilin and supercharged polypeptide are fabricated via wet-spinning approaches. Particularly, the highly ordered structures induced by supramolecular complexation significantly improve the fiber's mechanical performance. In contrast to chemical fibers with high strength and low toughness (or vice versa), the present fibers demonstrate exceptional high strength and super-toughness, showing a breaking strength of ≈550 MPa and a toughness of ≈250 MJ m^-3 , respectively, surpassing many polymers and artificial protein fibers. Remarkably, the outstanding biocompatibility and superior mechanical properties allow application of the constructed fiber patches for efficient abdominal hernia repair in rat models. In stark contrast to clinical patches, there is no observed tissue adhesion by this treatment. Therefore, this work provides a new type of engineered protein material for surgical applications.

Genetically engineered pH-responsive silk sericin nanospheres with efficient therapeutic effect on ulcerative colitis

Ulcerative colitis (UC) is one type of inflammatory bowel disease (IBD) and lactoferrin (LF) is a promising protein drug to treat UC. However, targeted LF delivery to optimize bioavailability, targeting and effectiveness remains a challenge. Here, we report an effective strategy to fabricate silk sericin nanospheres systems for the delivery of recombinant human lactoferrin (SS-NS-rhLF). The system is based on the use of optimized transgenic silkworms to generate genetically engineered silk fibers (rhLF-silks). The rhLF silks were used for fabricating SS-NS-rhLF by ethanol precipitation. The SS-NS-rhLF were stable with a spherical morphology with an average diameter of 123 nm. The negatively charged sericins in a pH ≥ 5.5 environment achieved specific targeting of the SS-NS-rhLF to positively charged colonic sites. The SS-NS-rhLF achieved efficient uptake by cells in the inflamed colon of mice when compared to free lactoferrin in solution (SOL-rhLF). Furthermore, oral administration of the SS-NS-rhLF with low dose of rhLF significantly relived symptoms of UC in mice and achieved comparable therapeutic effect to the high dose of SOL-rhLF by supporting the reformation of cell structure and length of colon tissue, reducing the release of inflammatory factors, inhibiting the activation of the NF-κB inflammatory pathway, and maintaining a stable intestinal microbial population in mice. These results showed that the SS-NS-rhLF is a promising system for colitis treatment. STATEMENT OF SIGNIFICANCE: Targeting and effective delivery of multiple biological functional protein human lactoferrin (rhLF) is a promising strategy to treat ulcerative colitis in the clinic. Here, rhLF-transgenic silk cocoons were used to fabricate a rhLF-sericin nanosphere delivery system (SS-NS-rhLF). The fabricated SS-NS-rhLF showed identical spherical morphology, stable structure, sustainable rhLF release, efficient cell uptake and negative charge in an environment of pH above 5.5, thus realized the specific targeting to the positively charged colonic sites to treat UC mice through oral administration. The therapeutic effect of SS-NS-rhLF with a low rhLF dose in the UC mice was comparable to the high dose of free rhLF treatment in solution form, suggesting that the SS-NS-rhLF is a promising system for colitis treatment.

Effect of Glycerol, Calcium and Transglutaminase Post-Treatment on the Properties of Regenerated Fibers from Rennet-Treated Casein Micelles

Regenerated fibers can be prepared from a cooled solution of renneted casein micelles in a wet spinning process. For better handling and stability of the fiber, plasticizers, network modifiers or cross-linkers are used in the production process. For that reason, fibers with different glycerol and calcium content are prepared in this study and subsequently treated with the enzyme transglutaminase before being characterized after air drying. In addition to the swelling behavior in NaOH, H2O, simulated milk ultrafiltrate buffer as well as HCl, the mechanical properties of the fibers are investigated, taking into account their microscopic fine structure. Transglutaminase-treated fibers show sigmoidal absorption curves for all solvents and reach higher equilibrium swelling percentages than untreated fibers. When the calcium content in the coagulation bath is increased from 50 mM to 100 mM, more stabilizing calcium bridges lead to a denser fiber structure that swells more slowly in all solvents considered. With increasing glycerol content, the flexibility of the fibers increases, as indicated by the decrease in elastic moduli, and a fine structure in the sub-µm range becomes visible. The fibers also demonstrate lower elastic moduli when post-treated with transglutaminase. Besides the higher casein content due to the transglutaminase treatment, this could also contribute to the higher equilibrium swelling percentages compared to the untreated fibers.

An Artificial PVA-BC Composite That Mimics the Biomechanical Properties and Structure of a Natural Intervertebral Disc

Disc herniation is one of the most ubiquitous healthcare problems in modern cities—severe patients eventually require surgical intervention. However, the existing operations—spinal fusion and artificial disc replacement—alter the biomechanics of the spine, leaving much room for improvement. The appropriateness of polyvinyl alcohol (PVA) for biomedical applications has been recognised due to its high water content, excellent biocompatibility, and versatile mechanical properties. In this study, a newly-designed PVA–bacterial cellulose (PVA-BC) composite was assembled to mimic both the biomechanics and annular structure of natural intervertebral discs (IVDs). PVA-BC composites of various concentrations were fabricated and tested under unconfined compression and compressive creep in order to acquire the values of the normalised compressive stiffness and whole normalised deformation. The normalised compressive stiffness increased considerably with an increasing PVA concentration, spanning from 1.82 (±0.18) to 3.50 (±0.14) MPa, and the whole normalised deformation decreased from 0.25 to 0.13. Formulations of 40% PVA provided the most accurate mimicry of natural human IVDs in normalised whole deformation, and demonstrated higher dimensional stability. The biocompatible results further confirmed that the materials had excellent biocompatibility. The novel bionic structure and formulations of the PVA-BC materials mimicked the biomechanics and structure of natural IVDs, and ensured dimensional stability under prolonged compression, reducing the risk of impingement on the surrounding tissue. The PVA-BC composite is a promising material for third-generation artificial IVDs with integrated construction.

Light manipulation for fabrication of hydrogels and their biological applications

The development of biocompatible materials with desired functions is essential for tissue engineering and biomedical applications. Hydrogels prepared from these materials represent an important class of soft matter for mimicking extracellular environments. In particular, dynamic hydrogels with responsiveness to environments are quite appealing because they can match the dynamics of biological processes. Among the external stimuli that can trigger responsive hydrogels, light is considered as a clean stimulus with high spatiotemporal resolution, complete bioorthogonality, and fine tunability regarding its wavelength and intensity. Therefore, photoresponsiveness has been broadly encoded in hydrogels for biological applications. Moreover, light can be used to initiate gelation during the fabrication of biocompatible hydrogels. Here, we present a critical review of light manipulation tools for the fabrication of hydrogels and for the regulation of physicochemical properties and functions of photoresponsive hydrogels. The materials, photo-initiated chemical reactions, and new prospects for light-induced gelation are introduced in the former part, while mechanisms to render hydrogels photoresponsive and their biological applications are discussed in the latter part. Subsequently, the challenges and potential research directions in this area are discussed, followed by a brief conclusion. STATEMENT OF SIGNIFICANCE: Hydrogels play a vital role in the field of biomaterials owing to their water retention ability and biocompatibility. However, static hydrogels cannot meet the dynamic requirements of the biomedical field. As a stimulus with high spatiotemporal resolution, light is an ideal tool for both the fabrication and operation of hydrogels. In this review, light-induced hydrogelation and photoresponsive hydrogels are discussed in detail, and new prospects and emerging biological applications are described. To inspire more research studies in this promising area, the challenges and possible solutions are also presented.