Plasmonic Core-Shell Nanomaterials and their Applications in Spectroscopies

Large-Scale Fabrication of 5 nm Plasmonic Hybrid Nanoslit Arrays

Surface plasmon resonance harnessed through nanometer-scale metallic gaps generates intense near-fields, unlocking vast potential for applications in nanophotonics and biosensing. However, the scarcity of scalable and reproducible nanofabrication techniques capable of achieving a sub-10 nm gap remains a significant barrier to widespread implementation. Here, we present a high-throughput method combining deep-UV interference lithography, molecular self-assembly, and peeling to fabricate large-scale arrays of an ∼ 5 nm Au-Ag hybrid nanoslit. These arrays serve as highly effective substrates for surface-enhanced Raman spectroscopy (SERS), demonstrating the ability to detect rhodamine 6G at concentrations as low as 1 pM with an analytical enhancement factor of 2.2 × 107. Specifically, the hybrid nanoslit arrays exhibit significantly higher (by 2.6-fold) field enhancements than monolithic nanoslit arrays due to the in-phase hybridization mode in Au-Ag nanoslit. Our cost-effective, large-scale approach overcomes traditional scalability and hybrid patterning barriers, offering transformative potential for sensitive, reliable SERS-based detection platforms.

Integrating Inertial Microfluidics with SERS Bioprobe for Efficient Enrichment and Accurate Identification of Tumor Cells in Gastric Fluid and Ascites

Gastric cancer (GC) is a disease with high mortality rates and remains a central focus in medical research. Efficient enrichment, separation, and precise diagnosis of human gastric cancer (HGC) cells from biological samples are essential for early detection and treatment. However, the similarity in size of white blood cells (WBCs) and HGC cells in gastric fluid has posed vital challenges in the rapid identification and precise diagnosis of GC. To address this issue, a smart system that combines enrichment and detection of HGC cells using inertial microfluidic chips and a label-free surface-enhanced Raman spectroscopy (SERS) bioprobe has been developed. The HGC cells in simulated gastric fluid and ascites are rapidly separated and enriched by a spiral microfluidic chip. Silver bioprobes with excellent SERS performance are prepared to collect the label-free SERS spectra of HGC cells, normal gastric cells, and WBCs. SERS spectral data analysis and model prediction are performed by machine-learning-assisted principal component analysis-linear discriminant analysis (PCA-LDA). The result shows that HGC cells can be well identified with an accuracy as high as 96%. The microfluidic-SERS system proposed in this study can effectively separate and accurately identify tumor cells in body fluids, providing a new method of precision gastric cancer detection.

Integrative plasmonics: optical multi-effects and acousto-electric-thermal fusion for biosensing, energy conversion, and photonic circuits

Surface plasmons, a unique optical phenomenon arising at the interface between metals and dielectrics, have garnered significant interest across fields such as biochemistry, materials science, energy, optics, and nanotechnology. Recently, plasmonics is evolving from a focus on "classical plasmonics," which emphasizes fundamental effects and applications, to "integrative plasmonics," which explores the integration of plasmonics with multidisciplinary technologies. This review explores this evolution, summarizing key developments in this technological shift and offering a timely discussion on the fusion mechanisms, strategies, and applications. First, we examine the integration mechanisms of plasmons within the realm of optics, detailing how fundamental plasmonic effects give rise to optical multi-effects, such as plasmon-phonon coupling, nonlinear optical effects, electromagnetically induced transparency, chirality, nanocavity resonance, and waveguides. Next, we highlight strategies for integrating plasmons with technologies beyond optics, analyzing the processes and benefits of combining plasmonics with acoustics, electronics, and thermonics, including comprehensive plasmonic-electric-acousto-thermal integration. We then review cutting-edge applications in biochemistry (molecular diagnostics), energy (harvesting and catalysis), and informatics (photonic integrated circuits). These applications involve surface-enhanced Raman scattering (SERS), surface-enhanced infrared absorption (SEIRA), surface-enhanced fluorescence (SEF), chirality, nanotweezers, photoacoustic imaging, perovskite solar cells, photocatalysis, photothermal therapy, and triboelectric nanogenerators (TENGs). Finally, we conclude with a forward-looking perspective on the challenges and future of integrative plasmonics, considering advances in mechanisms (quantum effects, spintronics, and topology), materials (Dirac semimetals and hydrogels), technologies (machine learning, edge computing, in-sensor computing, and neuroengineering), and emerging applications (5G, 6G, virtual reality, and point-of-care testing).

Unveiling the Cation Effects on Electrocatalytic CO2 Reduction via Operando Surface-enhanced Raman Spectroscopy

The electrocatalytic carbon dioxide reduction reaction (CO2RR) can be significantly improved by the presence of alkali metal cations, yet the underlying mechanisms remain unclear. In this study, we developed clean Cu nanoparticles with tailored curvatures to modulate the local concentration of K+ cations and investigate their effects on CO2RR. The adjustment of particle curvature allows for direct control over cation concentrations within the electrochemical double layer, enabling broad-range modulation of cation concentration without concerns regarding solubility limitations or anionic interference. By tuning the plasmonic modes of the Cu particles, we achieved highly sensitive surface-enhanced Raman spectroscopy (SERS) under resonant conditions, facilitating in situ tracking of the short-lived intermediates in CO2RR. Our results revealed that K+ cations not only stabilize *COOH and *CO species and reduce the reaction energy barrier for C─C coupling but also increase the surface coverage of *CO, particularly for bridge *CO configurations. Furthermore, our findings suggest that the interactions between bridge *CO and atop *CO play a crucial role in facilitating the C─C coupling, offering insights for the design of electrocatalysts for CO2RR.

Alchemically-glazed plasmonic nanocavities using atomic layer metals: controllably synergizing catalysis and plasmonics

Plasmonic nanocavities offer exceptional confinement of light, making them effective for energy conversion applications. However, limitations with stability, materials, and chemical activity have impeded their practical implementation. Here we integrate ultrathin palladium (Pd) metal films from sub- to few- atomic monolayers inside plasmonic nanocavities using underpotential deposition. Despite the poor plasmonic properties of bulk Pd in the visible region, minimal loss in optical field enhancement is delivered along with Pd chemical enhancement, as confirmed by ab initio calculations. Such synergistic effects significantly enhance photocatalytic activity of the plasmonic nanocavities as well as photostability by suppressing surface atom migration. We show the atomic alchemical-glazing approach is general for a range of catalytic metals that bridge plasmonic and chemical catalysis, yielding broad applications in photocatalysis for optimal chemical transformation.

Field Detection of Multiple Infectious Diseases with Naked Eye Using Plasmonic-Enhanced Fluorescent Nanoparticles

Accurately diagnosing infectious diseases in a resource-limited setting is a major challenge. Plasmonic materials, via localized surface plasmon resonance (LSPR), have greatly enhanced fluorescence signal and detection sensitivity. However, traditional plasmonic-enhanced fluorescence methods largely rely on near-infrared or visible-light fluorophores with small Stokes shift, limiting naked-eye visibility without filters. In this study, we developed a novel plasmonic silver film (pSilverF) to enhance visible-light fluorescence with large Stokes shift, allowing for improved biomarker detection sensitivity under naked-eye observation. Integrated with bright fluorescent nanoparticles, we designed a multiplexed assay for detecting Hepatitis C Virus (HCV), Hepatitis B Virus (HBV), and Human Immunodeficiency Virus (HIV) antibodies, achieving detection sensitivities down to 0.0032, 0.023, and 0.168 NCU/mL, respectively. In a cohort of 68 clinical samples, our method achieved 100% sensitivity and specificity for HIV and HCV detection and 96% sensitivity and 100% specificity for HBV detection. Notably, the results can be visualized by the naked eye and directly captured by a standard mobile phone camera without any modification for signal analysis using RGB image splitting. This platform demonstrated potential for field detection of multiple infectious diseases with simple settings, providing a useful tool for disease control in communities and areas with limited medical resources.

Graphene quantum dot-coated polystyrene microsphere multilayer colloidal crystals with distributed Bragg reflector absorption

Distributed Bragg reflector (DBR) absorptive materials have broad applications in optical fibre communications, solar cells, and other fields. This study adopts dispersion polymerization to prepare monodisperse polystyrene (PS) microspheres. Graphene quantum dots (GQDs) are prepared using the ultrasonic dispersion method. By coating GQDs on surfaces of PS spheres, the micron-sized core-extremely thin shell, PS@GQDs structures are self-assembled successfully. Finally, using the improved gravity sedimentation, the unconventional colloidal crystals of PS@GQDs structures are fabricated and characterized for the first time. The unconventional colloidal crystals of PS@GQDs exhibit tunable DBR scattering absorption, ranging from near-ultraviolet to near-infrared, which is unlike the conventional DBR. The experimental observations and measurements indicate that the modification of the PS surface significantly red-shifted in the ultraviolet-near infrared bands (300-1200 nm). The interference fringes of GQDs of various sizes with PS spheres formed Bragg reflectors, creating larger amplitudes below 1200 nm. Raman spectra show that the colloidal crystals display the peaks of polystyrene with a red-shift. The numerical simulations indicate that the DBR phenomena can be understood as the topological excitations at the structure transitions in the plasmon resonances and photonic band crossovers.

A molecularly imprinted ratio fluorescence sensor based on metal-enhanced fluorescence of core-shell structure CaF2-silver nanoparticle for visual detection of dicamba

Although fluorescence analysis methods are widely used in pesticide residue detection, improving their sensitivity and selectivity remains a challenge. This paper presents a novel ratio fluorescence sensor based on the molecular imprinting polymers (MIPs) and metal-enhanced fluorescence for visual detection of dicamba (DIC). Calcium fluoride (CaF2) quantum dots (QDs) were immobilized on the surface of Ag@MIPs, resulting in a blue fluorescence response signal (Ag@MIPs-CaF2). The MIPs shell, which possesses a specific recognition capability, serves as an isolation layer to adjust the distance between Ag nanoparticles and CaF2 QDs for enhancing the fluorescence of CaF2 QDs by up to 7.1 times under optimal conditions. In the presence of DIC, the blue fluorescence was selectively quenched, while the reference signal red fluorescence from cadmium telluride QDs coated with silicon dioxide (CdTe@SiO2) remained relatively stable, resulting in a color change from blue to red. The sensor had a detection limit of 0.16 μM for DIC in the range of 1.0 to 50.0 μM, recovery rates of 85.4 to 103.5% for actual samples, and an imprinting factor of 3.28. The 3D finite-difference time-domain simulation revealed that the fluorescence enhancement was due to the local electric field amplification. Therefore, the developed sensing system in this work offers a broad application prospect for visual detection of DIC in food samples.

Magnetic-Plasmonic Core-Shell Nanoparticles: Properties, Synthesis and Applications for Cancer Detection and Treatment

Nanoparticles have been widely used in cancer diagnostics and treatment research due to their unique properties. Magnetic nanoparticles are popular in imaging techniques due to their ability to alter the magnetization field around them. Plasmonic nanoparticles are mainly applied in cancer treatments like photothermal therapy due to their ability to convert light into heat. While these nanoparticles are popular among their respective fields, magnetic-plasmonic core-shell nanoparticles (MPNPs) have gained popularity in recent years due to the combined magnetic and optical properties from the core and shell. MPNPs have stood out in cancer theranostics as a multimodal platform capable of serving as a contrast agent for imaging, a guidable drug carrier, and causing cellular ablation through photothermal energy conversion. In this review, we summarize the different properties of MPNPs and the most common synthesis approaches. We particularly discuss applications of MPNPs in cancer diagnosis and treatment based on different mechanisms using the magnetic and optical properties of the particles. Lastly, we look into current challenges they face for clinical applications and future perspectives using MPNPs for cancer detection and therapy.

Magnetic field-induced synergistic therapy of cancer using magnetoplasmonic nanoplatform

Combining photothermal and chemotherapy using single nanoplatform is an emerging direction in cancer nanomedicine. Herein, a magnetic field (MF) induced combination of chemo/photothermal therapy is demonstrated using Fe3O4@mSiO2@Au core@shell@satellites nanoparticles (NPs) loaded with chemotherapeutic drug doxorubicin (DOX), both in vitro and in vivo. An application of an external MF to the NPs dispersion causes magnetophoretic movement and aggregation of the NPs. While the synthesized NPs only slightly absorb light at ∼800 nm, their aggregation results in a significant near infrared (NIR) absorption associated with plasmon resonance coupling between the Au satellites in the NPs aggregates. As a result, the aggregates revealed an enhanced photothermal conversion efficiency (∼67 % versus ∼19 % for NPs in absence of MF) and an enhanced NIR photothermal effect was observed under 808 nm laser irradiation. A combination of the MF induced NIR photothermal therapy (PTT) with DOX chemotherapeutic action resulted in an efficient killing of NPs treated cancer cells in vitro and tumor growth restriction in 4T1-tumor-bearing mice in vivo. Histological studies showed striking differences in development and malignancy between tumors treated with the combination of NPs, MF and an 808 nm laser, and the control treatments, revealing a synergy of the MF-induced NIR PTT and chemotherapy and suggesting a promising strategy for cancer therapy.

Plasmon-Enhanced Fluorescence Based on Gold Nanobipyramids with PEG-Controlled Distance for Near-Infrared and Visual Analysis of Amyloid-β Aggregation

The number of cases of Alzheimer's disease (AD) characterized by progressive amnestic syndrome is dramatically increased with population aging. It is urgent to detect and diagnose this disease early. The state of amyloid-beta protein 1-42 (Aβ42) was commonly regarded as a hallmark for early diagnosis of AD. Here, a plasmon-enhanced fluorescence (PEF) sensor based on gold nanobipyramids (Au NBPs) was established for sensitive and visual detection of Aβ42 aggregation. Near-infrared (NIR) emitted boron-dipyrromethene (BODIPY) was employed as a fluorescent substance to obtain a 24-fold turn-on signal to recognize the state of aggregation of Aβ42. The distance between BODIPY and Au NBPs was controlled by the length of polyethylene glycol (PEG). The obtained sensor was applied to real-time and sensitive detection of the state of Aβ42 by detecting the aggregation-dependent color transformation in human neuroblastoma (SH-SY5Y) cells. With the advantage of visual and dynamic detection of the cellular environment, the method can be employed to follow the progression of the Aβ42 protein and has promise as a robust diagnostic tool for AD.

All-optical switch based on two-dimensional asymmetric electromagnetically induced grating in nanohybrid systems

This study investigates (EIG) in a nanohybrid configuration involving a semiconductor quantum dot (SQD) and a core-shell bimetallic nanoparticle coated with graphene. The goal is to optimize interactions between plasmons and excitons. This is achieved by utilizing nanoparticles covered with graphene, which enhances control over surface plasmons. These interactions decrease light absorption by quantum dots. At the same time, they enhance the presence of coherent states and quantum interference. The innovative aspect of this model lies in its ability to produce a two-dimensional asymmetric diffraction grating. This is accomplished by modulating the phase within a closed-loop structure and utilizing the nonlinear multi-wave mixing phenomenon, without needing to adjust other system parameters. More specifically, altering the phase of the incident fields produces an asymmetric diffraction grating with an efficiency exceeding 50%. Similarly, varying the frequency of the probing field results in an asymmetric diffraction grating with efficiencies exceeding 40%. This technology has the potential to enhance optical systems, such as all-optical switches in communications, by simplifying the alteration of laser beam phases and probe field frequencies.

Plasmonic Ag/PMMA/Eu nanocomposite for sensitive dual mode detection of malachite green

Accurate and efficient determination of malachite green (MG) in aquaculture is crucial for ensuring environment and food safety. Herein, we present a dual-response fluorescence probe based on an Ag/PMMA/Eu nanocomposite for the sensitive detection of MG with low concentration and single droplet. The luminescence properties of the Ag/PMMA/Eu nanocomposite and the fluorescence resonance energy transfer (FRET) effect between Eu and MG are significantly improved due to the localized surface plasmon resonance (LSPR) effect. The dual-response system enables the detection of MG through both luminescence intensity and energy transfer efficiency using the Ag/PMMA/Eu nanocomposite as a detection platform in the range of 0-10.78 µmol/L. The detection limit reaches as low as 0.5 nmol/L, a significant improvement over the 0.11 µmol/L limit achievable by pure Eu film alone, demonstrating superior sensitivity compared to traditional fluorescence detection techniques. The results indicate that the nanocomposite significantly boosts the sensitivity of the dual-mode sensors. In addition, the sensor successfully detects MG residues in lake water, highlighting the Ag/PMMA/Eu nanocomposite's potential to advance high sensitivity, selectivity, stability, and accurate detection in food security and biological analysis.

Unveiling Spatial and Temporal Dynamics of Plasmon-Enhanced Localized Fields in Metallic Nanoframes through Ultrafast Electron Microscopy

Plasmonic nanomaterials, particularly noble metal nanoframes (NFs), are important for applications such as catalysis, biosensing, and energy harvesting due to their ability to enhance localized electric fields and atomic efficiency via localized surface plasmon resonance (LSPR). Yet the fundamental structure-function relationships and plasmonic dynamics of the NFS are difficult to study experimentally and thus far rely predominately on computational methodologies, limiting their utilization. This study leverages the capabilities of ultrafast electron microscopy (UEM), specifically photon-induced near-field electron microscopy (PINEM), to probe the light-matter interactions within plasmonic NF structures. The effects of shape, size, and plasmonic coupling of Pt@Au core-shell NFs on spatial and temporal characteristics of plasmon-enhanced localized electric fields are explored. Importantly, time-resolved PINEM analysis reveals that the plasmonic fields around hexagonal NF prisms exhibit a spatially dependent excitation and decay rate, indicating a nuanced interplay between the spatial geometry of the NF and the temporal evolution of the localized electric field. These results and observations uncover nanophotonic energy transfer dynamics in NFs and highlight their potential for applications in biosensing and photocatalysis.

Surface Plasmonic Core-Shell Nanostructures in Surface Enhanced Raman Scattering and Photocatalysis

Core-shell nanostructures are a typical material design. Usually, it consists of a core wrapped in a shell. It has attracted much attention due to its tunable structure and composition, high surface area, and high programmability. The properties and resonance frequency of their surface plasmons can be adjusted by regulating the shape, size, and composition of metal core-shell nanostructures. This interaction makes core-shell nanostructures an excellent platform for plasmon-enhanced optical effects. This Perspective explores the categories of core-shell nanostructures, their exchanges with excitons in two-dimensional materials, their spectrum-enhanced aspects, and prospects for future applications of core-shell nanostructures.

Perspective on Tailored Nanostructure-Dominated SPP Effects for SERS

Localized surface plasmon resonance (LSPR) excited by an incident light can normally produce strong surface-enhanced Raman scattering (SERS) at the nanogaps among plasmonic nano-objects (so-called hot spots), which is extensively explored. In contrast, surface plasmon polaritons (SPPs) that can be generated by an incident beam via particular structures with a conservation of wave vectors can excite SERS effects as well. SPPs actually play an indispensable role in high-performance SERS devices but receive much less attention. In this perspective, SPPs and their couplings with LSPR for SERS excitations with differing effectiveness through particular plasmonic/dielectric structures/configurations, along with relevant fabrication approaches, are profoundly reviewed and commented on from a unique perspective from in situ to ex situ excitations of SERS enabled by spatiotemporally separated multiple processes of SPPs. Quantitative design of particular configurations/architectures enabling highly efficient and effective multiple processes of SPPs is particularly emphasized as one giant leap toward ultimate full quantitative design of intrinsically high-performance SERS chips and very critical for their batch manufacturability and applications as well. The viewpoints and prospects about innovative SERS devices based on tailored structure-dominated SPPs effects and their coupling with LSPR are presented and discussed.

Early Diagnosis and Prognosis Prediction of Pancreatic Cancer Using Engineered Hybrid Core-Shells in Laser Desorption/Ionization Mass Spectrometry

Effective detection of bio-molecules relies on the precise design and preparation of materials, particularly in laser desorption/ionization mass spectrometry (LDI-MS). Despite significant advancements in substrate materials, the performance of single-structured substrates remains suboptimal for LDI-MS analysis of complex systems. Herein, designer Au@SiO2@ZrO2 core-shell substrates are developed for LDI-MS-based early diagnosis and prognosis of pancreatic cancer (PC). Through controlling Au core size and ZrO2 shell crystallization, signal amplification of metabolites up to 3 orders is not only achieved, but also the synergistic mechanism of the LDI process is revealed. The optimized Au@SiO2@ZrO2 enables a direct record of serum metabolic fingerprints (SMFs) by LDI-MS. Subsequently, SMFs are employed to distinguish early PC (stage I/II) from controls, with an accuracy of 92%. Moreover, a prognostic prediction scoring system is established with enhanced efficacy in predicting PC survival compared to CA19-9 (p < 0.05). This work contributes to material-based cancer diagnosis and prognosis.

Three-Dimensionally Nanometallic Superstructure Synthesized via a Single-Particle Soft-Enveloping Strategy

Three-dimensionally (3D) integrated metallic nanomaterials composed of two or more different types of nanostructures make up a class of advanced materials due to the multidimensional and synergistic effects between different components. However, designing and synthesizing intricate, well-defined metallic 3D nanomaterials remain great challenges. Here, a novel single-particle soft-enveloping strategy using a core-shell Au NP@mSiO2 particle as a template was proposed to synthesize 3D nanomaterials, namely, a Au nanoparticle@center-radial nanorod-Au-Pt nanoparticle (Au NP@NR-NP-Pt NP) superstructure. Taking advantage of the excellent plasmonic properties of Au NP@NR-NP by the synergistic plasmonic coupling of the outer Au NPs and inner Au nanorods, we can enhance the catalytic performance for 4-nitrophenol hydrogenation using Au NP@NR-NP-Pt NP as a photocatalyst with plasmon-excited hot electrons from Au NP@NR-NP under light irradiation, which is 2.76 times higher than in the dark. This process opens a door for the design of a new generation of 3D metallic nanomaterials for different fields.

High Accuracy of Clinical Verification of Electrohydrodynamic-Driven Nanobox-on-Mirror Platform for Molecular Identification of Respiratory Viruses

The molecular detection of multiple respiratory viruses provides evidence for the rational use of drugs and effective health management. Herein, we developed and tested the clinical performance of an electrohydrodynamic-driven nanobox-on-mirror platform (E-NoM) for the parallel, accurate, and sensitive detection of four respiratory viral antigens. The E-NoM platform uses gold-silver alloy nanoboxes as the core material with the deposition of a silver layer as a shell on the core surfaces to amplify and enable a reproducible Raman signal readout that facilitates accurate detection. Additionally, the E-NoM platform employs gold microelectrode arrays as the mirror with electrohydrodynamics to manipulate the fluid flow and enhance molecular interactions for an improved biosensing response. The presence of viral antigens binds the nanobox-based core-shell nanostructure on the gold microelectrode and creates the nanocavity with extremely strong "hot spots" to benefit sensitive analysis. Significantly, in a large clinical cohort with 227 patients, the designed E-NoM platform demonstrates the capability of screening respiratory infection with achieved clinical specificity, sensitivity, and accuracy of 100.0, 96.48, and 96.91%, respectively. It is anticipated that the E-NoM platform can find a position in clinical usage for respiratory disease diagnosis.

Polydopamine-based plasmonic nanocomposites: rational designs and applications

Taking advantage of its adhesive nature and chemical reactivity, polydopamine (PDA) has recently been integrated with plasmonic nanoparticles to yield unprecedented hybrid nanostructures. With advanced architectures and optical properties, PDA-based plasmonic nanocomposites have showcased their potential in a wide spectrum of plasmon-driven applications, ranging from catalysis and chemical sensing, to drug delivery and photothermal therapy. The rational design of PDA-based plasmonic nanocomposites entails different material features of PDA and necessitates a thorough understanding of the sophisticated PDA chemistry; yet, there is still a lack of a systematic review on their fabrication strategies, plasmonic properties, and applications. In this Highlight review, five representative types of PDA-based plasmonic nanocomposites will be featured. Specifically, their design principles, synthetic strategies, and optical behaviors will be elucidated with an emphasis on the irreplaceable roles of PDA in the synthetic mechanisms. Together, their essential functions in diverse applications will be outlined. Lastly, existing challenges and outlooks on the rational design and assembly of next-generation PDA-based plasmonic nanocomposites will be presented. This Highlight review aims to provide synthetic insights and hints to inspire and aid researchers to innovate PDA-based plasmonic nanocomposites.

Chronic toxicity of core-shell SiC/TiO2 (nano)-particles to Daphnia magna under environmentally relevant food rations in the presence of humic acid

To date, research on the toxicity and potential environmental impacts of nanomaterials has predominantly focused on relatively simple and single-component materials, whilst more complex nanomaterials are currently entering commercial stages. The current study aimed to assess the long-term and size-dependent (60 and 500 nm) toxicity of a novel core-shell nanostructure consisting of a SiC core and TiO2 shell (SiC/TiO2, 5, 25, and 50 mg L-1) to the common model organism Daphnia magna. These novel core-shell nanostructures can be categorized as advanced materials. Experiments were conducted under environmentally realistic feeding rations and in the presence of a range of concentrations of humic acid (0.5, 2, 5, and 10 mg L-1 TOC). The findings show that although effect concentrations of SiC/TiO2 were several orders of magnitude lower than the current reported environmental concentrations of more abundantly used nanomaterials, humic acid can exacerbate the toxicity of SiC/TiO2 by reducing aggregation and sedimentation rates. The EC50 values (mean ± standard error) based on nominal SiC/TiO2 concentrations for the 60 nm particles were 28.0 ± 11.5 mg L-1 (TOC 0.5 mg L-1), 21.1 ± 3.7 mg L-1 (TOC 2 mg L-1), 18.3 ± 5.4 mg L-1 (TOC 5 mg L-1), and 17.8 ± 2.4 mg L-1 (TOC 10 mg L-1). For the 500 nm particles, the EC50 values were 34.9 ± 16.5 mg L-1 (TOC 0.5 mg L-1), 24.8 ± 5.6 mg L-1 (TOC 2 mg L-1), 28.0 ± 10.0 mg L-1 (TOC 5 mg L-1), and 23.2 ± 4.1 mg L-1 (TOC 10 mg L-1). We argue that fate-driven phenomena are often neglected in effect assessments, whilst environmental factors such as the presence of humic acid may significantly influence the toxicity of nanomaterials.

Multiphoton emission of single CdZnSe/ZnS quantum dots coupled with plasmonic Au nanoparticles

The fluorescence blinking and low multiphoton emission of quantum dots (QDs) have limited their application in lasing, light-emitting diodes, and so on. Coupling of single QDs to plasmonic nanostructures is an effective approach to control the photon properties. Here plasmon-exciton systems including Au nanoparticles and CdZnSe/ZnS QDs were investigated at the single particle level. With the modulation of the local electromagnetic field, the fluorescence intensity of single QDs is increased, accompanied by a significant suppression in blinking behavior, and the lifetime is shortened from 15 ns to 2 ns. Moreover, the second-order photon intensity correlation at zero lag time g2(0) of coupled single QDs is larger than 0.5, indicating an increased probability of multiphoton emission. The enhancement factors of radiative and nonradiative decay rates of QDs coupled with Au nanoparticles are calculated. The sharply increased radiative decay rate can be comparable to the nonradiative Auger rate, leading to dominated multiple exciton radiative recombination with PL intensity enhancement, suppressed blinking, lifetime shortening, and multiphoton emission. The results of the exciton decay dynamics and emission properties of single QDs in this work are helpful in exploring the mechanism of plasmon-exciton interaction and optoelectronic application of single QDs.

Surface-enhanced Raman spectroscopy as a powerful method for the analysis of Chinese herbal medicines

Chinese herbal medicines (CHMs) derived from nature have received increasing attention and become more popular. Due to their diverse production processes, complex ingredients, and different storage conditions, it is highly desirable to develop simple, rapid, efficient and trace detection methods to ensure the drug quality. Surface-enhanced Raman spectroscopy has the advantages of being time-saving, non-destructive, usable in aqueous environments, and highly compatible with various biomolecular samples, providing a promising analytical method for CHM. In this review, we outline the major advances in the application of SERS to the identification of raw materials, detection of bioactive constituents, characterization of adulterants, and detection of contaminants. This clearly shows that SERS has strong potential in the quality control of CHM, which greatly promotes the modernization of CHM.

Biosensors based on core-shell nanoparticles for detecting mycotoxins in food: A review

Mycotoxins are toxic metabolites produced by fungi in the process of infecting agricultural products, posing serious threat to the health of human and animals. Thus, sensitive and reliable analytical techniques for mycotoxin detection are needed. Biosensors equipped with antibodies or aptamers as recognition elements and core-shell nanoparticles (NPs) for the pre-treatment and detection of mycotoxins have been extensively studied. By comparison with monocomponent NPs, core-shell nanostructures exhibit unique optical, electric, magnetic, plasmonic, and catalytic properties due to the combination of functionalities and synergistic effects, resulting in significant improvement of sensing capacities in various platforms, such as surface-enhanced Raman spectroscopy, fluorescence, lateral flow immunoassay and electrochemical sensors. This review focused on the development of core-shell NPs based biosensors for the sensitive and accurate detection of mycotoxins in food samples. Recent developments were categorised and summarised, along with detailed discussion of advantages and shortcomings. The future potential of utilising core-shell NPs in food safety testing was also highlighted.

Design of Silica@Au Hybrid Nanostars for Enhanced SERS and Photothermal Effect

Core-shell nanostructures of silicon oxide@noble metal have drawn a lot of interest due to their distinctive characteristics and minimal toxicity with remarkable biocompatibility. Due to the unique property of localized surface plasmon resonance (LSPR), plasmonic nanoparticles are being used as surface-enhanced Raman scattering (SERS) based detection of pollutants and photothermal (PT) agents in cancer therapy. Herein, we demonstrate the synthesis of multifunctional silica core - Au nanostars shell (SiO2 @Au NSs) nanostructures using surfactant free aqueous phase method. The SERS performance of the as-synthesized anisotropic core-shell NSs was examined using Rhodamine B (RhB) dye as a Raman probe and resulted in strong enhancement factor of 1.37×106 . Furthermore, SiO2 @Au NSs were also employed for PT killing of breast cancer cells and they exhibited a concentration-dependent increase in the photothermal effect. The SiO2 @Au NSs show remarkable photothermal conversion efficiency of up to 72 % which is unprecedented. As an outcome, our synthesized NIR active SiO2 @Au NSs are of pivotal importance to have their dual applications in SERS enhancement and PT effect.

Silica Gels Doped with Gold Nanoparticles: Preparation, Structure and Optical Properties

A novel, one-pot sol-gel preparation scheme leading to reproducible incorporation of 20-40 nm sized gold nanoparticles (AuNPs) in SiO2 gels is developed based on in situ reduction during gelation using chloroauric acid and ascorbic acid. Variation in the preparation conditions affects the chemical composition, optical properties and size distribution of the AuNPs incorporated in the silica gels. Different organic dopants, i.e., oleic acid, acetic acid or dodecanethiol, are applied to modify the final composite material and to control the rate of reduction and growth of the AuNPs in the gels. The synthesized samples are characterized by UV/Vis/NIR spectroscopy, X-ray diffraction, transmission electron microscopy, thermal conductivity measurements and DTA/TG measurements. The optical properties of the obtained composites are explained using Mie theory. The incorporation of AuNPs leads to an increase in the thermal conductivity of the silica gels. The best process method in this contribution is the use of NaOH as a gelation catalyst and oleic acid as an organic modifier, leading to 20 nm AuNPs dispersed in the silica matrix.

Multimorphological Remoldable Silver Nanomaterials from Multimode and Multianalyte Colorimetric Sensing to Molecular Information Technology

Inspired by life's interaction networks, ongoing efforts are to increase complexity and responsiveness of multicomponent interactions in the system for sensing, programmable control, or information processing. Although exquisite preparation of single uniform-morphology nanomaterials has been extremely explored, the potential value of facile and one-pot preparation of multimorphology nanomaterials has been seriously ignored. Here, multimorphological silver nanomaterials (M-AgN) prepared by one pot can form interaction networks with various analytes, which can be successfully realized from multimode and multianalyte colorimetric sensing to molecular information technology (logic computing and security). The interaction of M-AgN with multianalytes not only induces multisignal responses (including color, absorbance, and wavelength shift) for sensing metal ions (Cr3+, Hg2+, and Ni2+) but also can controllably reshape its four morphologies (nanodots, nanoparticles, nanorods, and nanotriangles). By abstracting binary relationships between analytes and response signals, multicoding parallel logic operations (including simple logic gates and cascaded circuits) can be performed. In addition, taking advantage of natural concealment and molecular response characteristics of M-AgN nanosystems can also realize molecular information encoding, encryption, and hiding. This research not only promotes the construction and application of multinano interaction systems based on multimorphology and multicomponent nanoset but also provides a new imagination for the integration of sensing, logic, and informatization.

Design of competition nanoreactor with shell-isolated colloidal plasmonic nanomaterials for quantitative sensor platform

Shell-isolated colloid plasmonic nanomaterials-based nanoreactor is a well-established platform widely applied in catalyst or Surface Enhanced Raman Scattering (SERS) sensors. The potentials versatility of nanoreactor platform is mainly implemented by the well-defined and tailorable structure of colloid plasmonic nanomaterials. Currently, a competitive conjugative-mediated nanoreactor is introduced to determine glucose with SERS. Glucose-conjugating nanoreactor, as convertors of the sensors, are constructed by coordinated deposition colloidal gold nanoparticles with sodium nitroprusside framework (Au@SNF) and covalently bonded 4-mercaptopyridine (4-Mpy) with self-assembly strategy. The nanoreactor contained the signal-amplifier Au@SNF NPs, conjugative-mediated signal receiver 4-Mpy, and signal internal standard molecular CN^-. In addition to well-defined morphology and functionality, conjugative-mediated and internal standards method are also employed to benefit the nanoreactor. The two-parameter strategy significantly improves the signal indication and correction. Using this proposed platform, the competitive-mediated nanoreactor provides a quantitative SERS detection of glucose, and extends the applicability of SERS in more complicated and reproducibility analysis. Meanwhile, the nanoreactor based sensors also exhibited better properties to detect glucose in various food samples and bio-samples which provided strongly appliance for glucose sensors.

Site-specific growth of gold nanoparticles on Bismuth Selenide hexagonal nanoplates

Highly site-specific growth of gold nanoparticles (AuNPs) on Bismuth Selenide (Bi₂Se₃) hexagonal nanoplates was achieved by fine-tuning the growth kinetics of Au through controlling the coordination number of the Au ion in MBIA-Au³⁺ complex. With increasing concentration of MBIA, the increased amount and the coordination number of the MBIA-Au³⁺ complex results in the decrease of the reduction rate of Au. The slowed growth kinetics of Au allowed the recognition of the sites with different surface energy on the anisotropic Bi₂Se₃ hexagonal nanoplates. As a result, the site-specific growth of AuNPs at the corner, the edge, and the surface of the Bi₂Se₃ nanoplates were successfully achieved. This way of growth kinetic control was proven to be effective in constructing well-defined heterostructures with precise site-specificity and high purity of the product. This is helpful for the rational design and controlled synthesis of sophisticated hybrid nanostructures and would eventually promote their applications in various fields.

Multi-dimensional plasmonic coupling system for efficient enrichment and ultrasensitive label-free SERS detection of bilirubin based on graphene oxide-Au nanostars and Au@Ag nanoparticles

Rapid and sensitive detection of free bilirubin (BR) is essential for early diagnosis of jaundice and other hepatobiliary diseases. Inspired by sandwich immunoassay strategy, a multi-dimensional plasmonic coupling SERS platform composed of graphene oxide-Au nanostars nanocomposites (GANS NCs) and Au@Ag nanoparticles (NPs) was designed for label-free detection of BR. Specifically, GANS NCs were first prepared, and their excellent SERS activity was ascribed to synergistic enhancement effect of electromagnetic enhancement and chemical enhancement. Furthermore, SERS spectroscopy was used to monitor the adsorption process of BR. Subsequently, secondary reinforcing Au@Ag NPs were directly added, ultimately resulting in a multi-dimensional plasmonic coupling effect. The SERS enhancing mechanism of coupled system was discussed through electromagnetic field simulations. Interestingly, the high-density hotspots generated by strong plasmonic coupling in GANS-Au@Ag substrate could lead to more extraordinary SERS enhancing behavior compared to GANS NCs. Sensing efficiency of the SERS platform was examined by BR with a detection limit down to 10^-11 M. Besides, GANS-Au@Ag NCs performed high uniformity and reproducibility. This work not only opens up a new avenue for construction of multi-dimensional plasmonic coupling system, but also offers a new biosensing technology for label-free diagnosis of BR-related diseases, thereby expecting to be applied in clinical diagnosis.

Composite nanoparticle-metal-organic frameworks for SERS sensing

In recent years, metal-organic frameworks, in general, and zeolitic imidazolate frameworks, in special, had become popular due to their large surface area, pore homogeneity, and easy preparation and integration with plasmonic nanoparticles to produce optical sensors. Herein, we summarize the late advances in the use of these hybrid composites in the field of surface-enhanced Raman scattering and their future perspectives.

Intelligent convolution neural network-assisted SERS to realize highly accurate identification of six pathogenic Vibrio

Based on label-free SERS technology, the relationship between the Raman signals of pathogenic Vibrio microorganisms and purine metabolites was analyzed in detail. A deep learning CNN model was successfully developed, achieving a high accuracy rate of 99.7% in the identification of six typical pathogenic Vibrio species within 15 minutes, providing a new method for pathogen identification.

VSe2-x O x @Pd Sensor for Operando Self-Monitoring of Palladium-Catalyzed Reactions

Operando monitoring of catalytic reaction kinetics plays a key role in investigating the reaction pathways and revealing the reaction mechanisms. Surface-enhanced Raman scattering (SERS) has been demonstrated as an innovative tool in tracking molecular dynamics in heterogeneous reactions. However, the SERS performance of most catalytic metals is inadequate. In this work, we propose hybridized VSe2-x O x @Pd sensors to track the molecular dynamics in Pd-catalyzed reactions. Benefiting from metal-support interactions (MSI), the VSe2-x O x @Pd realizes strong charge transfer and enriched density of states near the Fermi level, thereby strongly intensifying the photoinduced charge transfer (PICT) to the adsorbed molecules and consequently enhancing the SERS signals. The excellent SERS performance of the VSe2-x O x @Pd offers the possibility for self-monitoring the Pd-catalyzed reaction. Taking the Suzuki-Miyaura coupling reaction as an example, operando investigations of Pd-catalyzed reactions were demonstrated on the VSe2-x O x @Pd, and the contributions from PICT resonance were illustrated by wavelength-dependent studies. Our work demonstrates the feasibility of improved SERS performance of catalytic metals by modulating the MSI and offers a valid means to investigate the mechanisms of Pd-catalyzed reactions based on VSe2-x O x @Pd sensors.

Recent advances of Au@Ag core-shell SERS-based biosensors

The methodological advancements in surface-enhanced Raman scattering (SERS) technique with nanoscale materials based on noble metals, Au, Ag, and their bimetallic alloy Au-Ag, has enabled the highly efficient sensing of chemical and biological molecules at very low concentration values. By employing the innovative various type of Au, Ag nanoparticles and especially, high efficiency Au@Ag alloy nanomaterials as substrate in SERS based biosensors have revolutionized the detection of biological components including; proteins, antigens antibodies complex, circulating tumor cells, DNA, and RNA (miRNA), etc. This review is about SERS-based Au/Ag bimetallic biosensors and their Raman enhanced activity by focusing on different factors related to them. The emphasis of this research is to describe the recent developments in this field and conceptual advancements behind them. Furthermore, in this article we apex the understanding of impact by variation in basic features like effects of size, shape varying lengths, thickness of core-shell and their influence of large-scale magnitude and morphology. Moreover, the detailed information about recent biological applications based on these core-shell noble metals, importantly detection of receptor binding domain (RBD) protein of COVID-19 is provided.

Plasmonic Au-Cu nanostructures: Synthesis and applications

Plasmonic Au-Cu nanostructures composed of Au and Cu metals, have demonstrated advantages over their monolithic counterparts, which have recently attracted considerable attention. Au-Cu nanostructures are currently used in various research fields, including catalysis, light harvesting, optoelectronics, and biotechnologies. Herein, recent developments in Au-Cu nanostructures are summarized. The development of three types of Au-Cu nanostructures is reviewed, including alloys, core-shell structures, and Janus structures. Afterwards, we discuss the peculiar plasmonic properties of Au-Cu nanostructures as well as their potential applications. The excellent properties of Au-Cu nanostructures enable applications in catalysis, plasmon-enhanced spectroscopy, photothermal conversion and therapy. Lastly, we present our thoughts on the current status and future prospects of the Au-Cu nanostructures research field. This review is intended to contribute to the development of fabrication strategies and applications relating to Au-Cu nanostructures.

Advances in plasmonic-based MOF composites, their bio-applications and perspectives in this field

INTRODUCTION

Nanomaterials have been used for bio-applications since the late 20st century. In an attempt to tailor and optimize their properties, and by extension their efficiency, composites have attracted considerable attention. In this regard, recent studies on plasmonic nanoparticles and metal-organic framework (NP@MOF) composites suggested these materials show great promise in this field.

AREAS COVERED

This review focused on the more recent scientific advances in the synthetic strategies to optimize plasmonic MOF nanocomposites currently available, as well as their bio-application, particularly as biosensors and therapy.

EXPERT OPINION

Plasmonic MOF nanocomposites have shown great potential as they combine the properties of both materials with proven efficiency in bio-application. On the one hand, nanoMOFs have proven their potential particularly as drug nanocarriers, owing to their exceptional porosity and tunability. On the other hand, plasmonic nanoparticles have been an asset for imaging and phototherapy. Different strategies have been reported to develop these nanocomposites, mainly including core-shell, encapsulation, and in situ reduction. In addition, advanced composite structures should be considered, such as mixed metal nanoparticles, hollow structures or the combination of several approaches. Specifically, plasmonic MOF nanocomposites prove to be attractive stimuli responsive drug delivery systems, phototherapeutic agents as well as highly sensitive biosensors.

Hollow Nanoboxes Cu2-x S@ZnIn2 S4 Core-Shell S-Scheme Heterojunction with Broad-Spectrum Response and Enhanced Photothermal-Photocatalytic Performance

Major issues in photocatalysis include improving charge carrier separation efficiency at the interface of semiconductor photocatalysts and rationally developing efficient hierarchical heterostructures. Surface continuous growth deposition is used to make hollow Cu_2-x S nanoboxes, and then simple hydrothermal reaction is used to make core-shell Cu_2-x S@ZnIn₂ S₄ S-scheme heterojunctions. The photothermal and photocatalytic performance of Cu_2-x S@ZnIn₂ S₄ is improved. In an experimental hydrogen production test, the Cu_2-x S@ZnIn₂ S₄ photocatalyst produces 4653.43 µmol h^-1 g^-1 of hydrogen, which is 137.6 and 13.8 times higher than pure Cu_2-x S and ZnIn₂ S₄ , respectively. Furthermore, the photocatalyst exhibits a high tetracycline degradation efficiency in the water of up to 98.8%. For photocatalytic reactions, the hollow core-shell configuration gives a large specific surface area and more reactive sites. The photocatalytic response range is broadened, infrared light absorption enhanced, the photothermal effect is outstanding, and the photocatalytic process is promoted. Meanwhile, characterizations, degradation studies, active species trapping investigations, energy band structure analysis, and theoretical calculations all reveal that the S-scheme heterojunction can efficiently increase photogenerated carrier separation. This research opens up new possibilities for future S-scheme heterojunction catalyst design and development.

Liquid crystal-templated chiral nanomaterials: from chiral plasmonics to circularly polarized luminescence

Chiral nanomaterials with intrinsic chirality or spatial asymmetry at the nanoscale are currently in the limelight of both fundamental research and diverse important technological applications due to their unprecedented physicochemical characteristics such as intense light-matter interactions, enhanced circular dichroism, and strong circularly polarized luminescence. Herein, we provide a comprehensive overview of the state-of-the-art advances in liquid crystal-templated chiral nanomaterials. The chiroptical properties of chiral nanomaterials are touched, and their fundamental design principles and bottom-up synthesis strategies are discussed. Different chiral functional nanomaterials based on liquid-crystalline soft templates, including chiral plasmonic nanomaterials and chiral luminescent nanomaterials, are systematically introduced, and their underlying mechanisms, properties, and potential applications are emphasized. This review concludes with a perspective on the emerging applications, challenges, and future opportunities of such fascinating chiral nanomaterials. This review can not only deepen our understanding of the fundamentals of soft-matter chirality, but also shine light on the development of advanced chiral functional nanomaterials toward their versatile applications in optics, biology, catalysis, electronics, and beyond.

Quantifying Hot Electron Energy Contributions in Plasmonic Photocatalysis Using Electrochemical Surface-Enhanced Raman Spectroscopy

Due to the challenge in measuring hot electron energy under reaction conditions, very few studies focus on experimental determination of hot carrier energy. Here, we adjust the energy state of free electrons in Au nanoparticles to quantify the hot electron energy in plasmonic photocatalysis. Reactant molecules with different reduction potentials such as 4-nitrothiophenol (4-NTP), 4-iodothiophenol (4-ITP), etc. are chosen as molecular probes to investigate the reducing ability of hot electrons. By comparing the voltage required to achieve the same conversion of photo- and electro-reaction pathways, we calibrate the maximum energy efficiency of hot electrons in 4-NTP reduction to be 0.32 eV, which is much lower than the excitation photon energy of 1.96 eV. Our work provides insight into the energy distribution of hot electrons and will be helpful for rational design of highly efficient plasmon-mediated chemical reactions.

Face-to-Face Assembly of Ag Nanoplates on Filter Papers for Pesticide Detection by Surface-Enhanced Raman Spectroscopy

Surface-enhanced Raman spectroscopy (SERS) technology has been regarded as a most efficient and sensitive strategy for the detection of pollutants at ultra-low concentrations. Fabrication of SERS substrates is of key importance in obtaining the homogeneous and sensitive SERS signals. Cellulose filter papers loaded with plasmonic metal NPs are well known as cost-effective and efficient paper-based SERS substrates. In this manuscript, face-to-face assembly of silver nanoplates via solvent-evaporation strategies on the cellulose filter papers has been developed for the SERS substrates. Furthermore, these developed paper-based SERS substrates are utilized for the ultra-sensitive detection of the rhodamine 6G dye and thiram pesticides. Our theoretical studies reveal the creation of high density hotspots, with a huge localized and enhanced electromagnetic field, near the corners of the assembled structures, which justifies the ultrasensitive SERS signal in the fabricated paper-based SERS platform. This work provides an excellent paper-based SERS substrate for practical applications, and one which can also be beneficial to human health and environmental safety.

Microwave-Assisted Synthesis of Silver Nanoparticles for Multimode Colorimetric Sensing of Multiplex Metal Ions and Molecular Informatization Applications

Plasmonic materials have been widely used in chemo/biosensing and biomedicine. However, little attention has been paid to the application of plasmonic materials in terms of the transition from molecular sensing to molecular informatization. Herein, we demonstrated that silver nanoparticles (AgNPs) prepared through facile and rapid microwave heating have multimode colorimetric sensing capabilities to different metal ions (Cr³⁺, Hg²⁺, and Ni²⁺), which can be further transformed into interesting and powerful molecular information technology (massively parallel molecular logic computing and molecular information protection). The prepared AgNPs can quantitatively and sensitively detect Cr³⁺ and Hg²⁺ in actual water samples. The AgNPs' multimode-guided multianalyte sensing processing was further investigated to construct a series of basic logic gates and advanced cascaded logic circuits by considering the analytes as the inputs and the colorimetric signals (like color, absorbance, wavelength shift) as the outputs. Moreover, the selective responses and molecular logic computing ability of AgNPs were also utilized to develop molecular cryptosteganography for encrypting and hiding some specific information, which proves that the molecular world and the information world are interconnected and use each other. This research not only opens the door for the transition from molecular sensing to molecular informatization but also provides an excellent opportunity for the construction of the "metaverse" of the molecular world.

Shell-Isolated Nanoparticle-Enhanced Raman Spectroscopy for Probing Riboflavin on Graphene

Graphene research and technology development requires to reveal adsorption processes and understand how the defects change the physicochemical properties of the graphene-based systems. In this study, shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) and graphene-enhanced Raman spectroscopy (GERS) coupled with density functional theory (DFT) modeling were applied for probing the structure of riboflavin adsorbed on single-layer graphene substrate grown on copper. Intense and detailed vibrational signatures of the adsorbed riboflavin were revealed by SHINERS method. Based on DFT modeling and detected downshift of prominent riboflavin band at 1349 cm-1 comparing with the solution Raman spectrum, π-stacking interaction between the adsorbate and graphene was confirmed. Different spectral patterns from graphene-riboflavin surface were revealed by SHINERS and GERS techniques. Contrary to GERS method, SHINERS spectra revealed not only ring stretching bands but also vibrational features associated with ribityl group of riboflavin and D-band of graphene. Based on DFT modeling it was suggested that activation of D-band took place due to riboflavin induced tilt and distortion of graphene plane. The ability to explore local perturbations by the SHINERS method was highlighted. We demonstrated that SHINERS spectroscopy has a great potential to probe adsorbed molecules at graphene.

Highly Stable Polymer Coating on Silver Nanoparticles for Efficient Plasmonic Enhancement of Fluorescence

Surface coating of plasmonic nanoparticles is of huge importance to suppress fluorescence quenching in plasmon-enhanced fluorescence sensing. Herein, a one-pot method for synthesizing polymer-coated silver nanoparticles was developed using a functional polymer conjugated with disulfide-containing anchoring groups. The disulfides played a crucial role in covalently bonding polymers to the surface of the silver nanoparticles. The covalent bond enabled the polymer layer to form a long-term stable coating on the silver nanoparticles. The polymer layer coated was adequately thin to efficiently achieve plasmonic enhancement of fluorescence and also thick enough to effectively suppress quenching of fluorescence, achieving a huge net enhancement of fluorescence. The polymer-coated plasmonic nanoparticles are a promising platform for demonstrating highly sensitive biosensing for medical diagnostics.

Ultrathin Nanosheet-Supported Ag@Ag2O Core-Shell Nanoparticles with Vastly Enhanced Photothermal Conversion Efficiency for NIR-II-Triggered Photothermal Therapy

Photothermal therapy (PTT) working in the second near-infrared (NIR-II) region has aroused a huge interest due to its potential application in terms of clinical cancer treatment. However, owing to the lack of photothermal nanoagents with high photothermal conversion efficiency, NIR-II-driven PTT still suffers from poor efficiency and subsequent cancer recurrence. In this work, we show a new and highly efficient preparation approach for NIR-II photothermal nanoagents and tailor ultrathin layered double hydroxide (LDH)-supported Ag@Ag₂O core-shell nanoparticles (Ag@Ag₂O/LDHs-U), vastly improving NIR-II photothermal performance. A combination study (high-resolution transmission electron microscopy (HRTEM), extended X-ray absorption fine structure spectroscopy (EXAFS), and X-ray photoelectron spectroscopy (XPS)) verifies that ultrafine Ag@Ag₂O core-shell nanoparticles (∼3.8 nm) are highly dispersed and firmly immobilized within ultrathin LDH nanosheets, and their Ag₂O shell possesses abundant vacancy-type defects. These unique Ag@Ag₂O/LDHs-U display an impressive photothermal conversion efficiency as high as 76.9% at 1064 nm. Such an excellent photothermal performance is likely attributed to the enhanced localized surface plasmon resonance (LSPR) coupling effect between Ag and Ag₂O and the reduced band gap caused by vacancy-type defects in the Ag₂O shell. Meanwhile, Ag@Ag₂O/LDHs-U also show prominent photothermal stability, due to the unique supported core-shell nanostructure. Moreover, both in vitro and in vivo studies further confirm that Ag@Ag₂O/LDHs-U possess good biocompatible properties and outstanding PTT therapeutic efficacy in the NIR-II region. This research shows a new strategy in the rational design and preparation of an efficient photothermal agent, which is helpful to achieve more accurate and effective cancer theranostics.

Large-Area Nanosphere Self-Assembly Monolayers for Periodic Surface Nanostructures with Ultrasensitive and Spatially Uniform SERS Sensing

Colloidal lithography provides a rapid and low-cost approach to construct 2D periodic surface nanostructures. However, an impressive demonstration to prepare large-area colloidal template is still missing. Here, a high-efficient and flexible technique is proposed to fabricate self-assembly monolayers consisting of orderly-packed polystyrene spheres at air/water interface via ultrasonic spray. This "non-contact" technique exhibits great advantages in terms of scalability and adaptability due to its renitent interface dynamic balance. More importantly, this technique is not only competent for self-assembly of single-sized polystyrene spheres, but also for binary polystyrene spheres, completely reversing the current hard situation of preparing large-area self-assembly monolayers. As a representative application, hexagonal-packed silver-coated silicon nanorods array (Si-NRs@Ag) is developed as an ultrasensitive surface-enhanced Raman scattering (SERS) substrate with very low limit-of-detection for selective detection of explosive 2,4,6-trinitrotoluene down to femtomolar (10^-14 m) range. The periodicity and orderliness of the array allow hot spots to be designed and constructed in a homogeneous fashion, resulting in an incomparable uniformity and reproducibility of Raman signals. All these excellent properties come from the Si-NRs@Ag substrate based on the ordered structure, open surface, and wide-range electric field, providing a robust, consistent, and tunable platform for molecule trapping and SERS sensing for a wide range of organic molecules.

Topological alternation from structurally adaptable to mechanically stable crosslinked polymer

Stimuli-responsive polymers with complicated but controllable shape-morphing behaviors are critically desirable in several engineering fields. Among the various shape-morphing materials, cross-linked polymers with exchangeable bonds in dynamic network topology can undergo on-demand geometric change via solid-state plasticity while maintaining the advantageous properties of cross-linked polymers. However, these dynamic polymers are susceptible to creep deformation that results in their dimensional instability, a highly undesirable drawback that limits their service longevity and applications. Inspired by the natural ice strategy, which realizes creep reduction using crystal structure transformation, we evaluate a dynamic cross-linked polymer with tunable creep behavior through topological alternation. This alternation mechanism uses the thermally triggered disulfide-ene reaction to convert the network topology - from dynamic to static - in a polymerized bulk material. Thus, such a dynamic polymer can exhibit topological rearrangement for thermal plasticity at 130°C to resemble typical dynamic cross-linked polymers. Following the topological alternation at 180°C, the formation of a static topology reduces creep deformation by more than 85% in the same polymer. Owing to temperature-dependent selectivity, our cross-linked polymer exhibits a shape-morphing ability while enhancing its creep resistance for dimensional stability and service longevity after sequentially topological alternation. Our design enriches the design of dynamic covalent polymers, which potentially expands their utility in fabricating geometrically sophisticated multifunctional devices.

Core-shellchiralpolymeric-metallic particles obtained in a single step by concurrentlight induced processes

Core-shell architecture enables to impart unique customized properties to microparticles, through the proper selection of composition and aggregation state of the inner and outer materials. Here, the synthesis of microparticles with a chiral dielectric core and a metallic shell of gold nanoparticles is demonstrated. The chiral core is obtained by UV induced polymerization of the self-organized droplets of a cholesteric reactive mesogen in a chloroauric acid aqueous solution. Gold nanoparticles precipitation contemporarily occurs upon UV irradiation, covering the microparticles surface. Electron microscopy and optical spectroscopy investigations give evidence that the degree of coverage of the core by gold nanoparticles, with size less than 100 nm, depends on the chloroauric acid concentration, while their aggregation is influenced by the polymeric surface morphology. The optical properties of the chiral microparticles are modified by the gold shell. Specifically, gold coating of dye doped chiral microparticles, working as Bragg onion resonators, clearly improves the stability of omnidirectional microlasers. The proposed strategy, due to the flexibility of the chiral material and of the method, opens a route toward fabrication of microdevices with wide control over light manipulation, in term of intensity, polarization, generation.

Flexible Plasmonic Biosensors for Healthcare Monitoring: Progress and Prospects

The noble metal nanoparticle has been widely utilized as a plasmonic unit to enhance biosensors, by leveraging its electric and/or optical properties. Integrated with the "flexible" feature, it further enables opportunities in developing healthcare products in a conformal and adaptive fashion, such as wrist pulse tracers, body temperature trackers, blood glucose monitors, etc. In this work, we present a holistic review of the recent advance of flexible plasmonic biosensors for the healthcare sector. The technical spectrum broadly covers the design and selection of a flexible substrate, the process to integrate flexible and plasmonic units, the exploration of different types of flexible plasmonic biosensors to monitor human temperature, blood glucose, ions, gas, and motion indicators, as well as their applications for surface-enhanced Raman scattering (SERS) and colorimetric detections. Their fundamental working principles and structural innovations are scoped and summarized. The challenges and prospects are articulated regarding the critical importance for continued progress of flexible plasmonic biosensors to improve living quality.

Rapid and Simple Analysis of the Human Pepsin Secondary Structure Using a Portable Raman Spectrometer

Human pepsin is a digestive protease that plays an important role in the human digestive system. The secondary structure of human pepsin determines its bioactivity. Therefore, an in-depth understanding of human pepsin secondary structure changes is particularly important for the further improvement of the efficiency of human pepsin biological function. However, the complexity and diversity of the human pepsin secondary structure make its analysis difficult. Herein, a convenient method has been developed to quickly detect the secondary structure of human pepsin using a portable Raman spectrometer. According to the change of surface-enhanced Raman spectroscopy (SERS) signal intensity and activity of human pepsin at different pH values, we analyze the change of the human pepsin secondary structure. The results show that the content of the β-sheet gradually increased with the increase in the pH in the active range, which is in good agreement with circular dichroism (CD) measurements. The change of the secondary structure improves the sensitivity of human pepsin SERS detection. Meanwhile, human pepsin is a commonly used disease marker for the noninvasive diagnosis of gastroesophageal reflux disease (GERD); the detection limit of human pepsin we obtained is 2 μg/mL by the abovementioned method. The real clinical detection scenario is also simulated by spiking pepsin solution in saliva, and the standard recovery rate is 80.7-92.3%. These results show the great prospect of our method in studying the protein secondary structure and furthermore promote the application of SERS in clinical diagnosis.

A simple derivation of the shell polarizability formula and investigation of the plasmonic behavior of aluminum nanoshells with the Mie theory

In this paper, we found that the formula of shell polarizability in existing popular monographs is not uniform, which may lead to misuse of this expression in research. To avoid potential misuse, a detailed derivation has been supplemented in this work to clarify this formula. Using the attained correct shell polarizability, we questioned the conclusion of the surface plasmon resonances of aluminum metal nanoshells that could be tuned into the near-infrared region in previous research. More importantly, the new reliable parameters are successfully searched to achieve controllable surface plasmon resonances of aluminum nanoshells, such as tuning into the near-infrared regime, based on the Mie theory.