Designing MOF Nanoarchitectures for Electrochemical Water Splitting

Bioinspired Ruthenium-Porphyrin Electrocatalysts with Atomic N4/N2 Proximal Sites for Efficient Proton-Coupled Electron Transfer in Water Electrolysis

Mimicking the proton-coupled electron transfer (PCET) pathways of natural enzymes, we engineer a porphyrin-based ruthenium coordination polymer (Ru-PCPN) with precisely positioned atomic-level N4/N2 proximal sites through molecular-scale coordination engineering. This bioinspired architecture establishes a dual-site relay mechanism where the Ru-N2 center accelerates water dissociation kinetics while the adjacent Ru-N4 site optimizes hydrogen recombination. Experimental and theoretical results reveal that the sub-nanometer-proximate N4/N2 sites function as proton donor-acceptor pairs, enabling directional proton transfer via PCET and synergistically enhancing water electrolysis. When integrated with carbon substrates, the Ru-PCPN@CB catalyst demonstrates exceptional hydrogen evolution performance in alkaline conditions, achieving a low overpotential at 10 mA cm-2 (42 mV, comparable to 44 mV of Pt/C), high mass activity and TOF of 9.02 A mg-1 and 4.73 s-1 (∼7.0 and 3.6 times of Pt/C), and good stability. This work establishes atomic-scale coordination proximity as a new paradigm for breaking scaling relationships in multistep electrocatalysis.

Tunable Surfactant-Assisted WO3 Nanogranules as High-Performance Electrocatalysts for the Oxygen Evolution Reaction

Addressing the global energy demand requires the development of sustainable and highly efficient technologies for clean energy generation. One of the primary challenges in the oxygen evolution reaction (OER) is overcoming sluggish reaction kinetics, which requires the design of electrocatalysts with greater activity and long-term stability. In this study, a precipitation method was employed to synthesize polyethylene glycol (PEG) assisted tungsten oxide (WO3) as an effective and stable electrocatalyst for OER. PEG was incorporated at varying concentrations (1%, 3%, and 5%) to modulate the structural and electrochemical characteristics of WO3. Among the resulting composites, the sample with 3% PEG (PEG-WO3-2) exhibited the most favorable catalytic behavior, achieving a low overpotential of 407.7 mV at a current density of 10 mA cm-2 and a Tafel slope of 76.2 mV dec-1 in 1 M KOH electrolyte. Furthermore, long-term electrochemical stability was evaluated over 5000 consecutive cycles, revealing minimal degradation in catalytic activity. The heightened performance is attributed to the optimized composition, improved electron transport properties, and the presence of a higher density of active sites, all of which contribute to the superior catalytic activity of the PEG-WO3-2 electrocatalyst.

Heteroatom-Based Ligand Engineering of Metal Organic Frameworks for Efficient and Robust Electrochemical Water Oxidation

Metal-organic frameworks (MOFs) are promising catalysts for the electrochemical oxygen evolution reaction (OER) due to their high surface area, tunable pore structures, and abundant active sites. Ligand engineering is an important strategy to optimize their performance. Here, we report the synthesis of NiFe-MOFs based on three different ligands: 1,4-terephthalic acid (BDC), 2,4-thiophene dicarboxylic acid (TDC), and 2,5-furandicarboxylic acid (FDC), to investigate the effects of heteroatom-based aromatic rings on OER performance. It is revealed that by incorporating electronegative sulfur and oxygen atoms into the ligands, the electron density at the metal sites is reduced, leading to enhanced metal-oxygen covalency and improved charge transfer kinetics. The NiFe-FDC/NF catalyst demonstrates an overpotential of 189 mV at 10 mA⋅cm-2 and stable performance over 1300 hours at 1 A cm-2. In situ infrared spectroscopy reveal minimal structural reconstruction in NiFe-FDC/NF, contributing to its superior stability. The NiFe-FDC/NF were then subjected to 3600 hours of OER operation and it's metal elution was monitored. These findings offer a novel approach to ligand design for high-performance MOF-based OER catalysts, highlighting the potential of furan-based ligands for MOF ligand engineering.

Hollow CoNiFe ternary metal selenide electrocatalysts derived from Prussian blue analogues for boosting the oxygen evolution reaction

The development of effective electrocatalysts is a top priority for the oxygen evolution reaction (OER), which is the crucial half-reaction of water electrolysis, since electrocatalytic water splitting for hydrogen production offers a practical solution to the upcoming energy crisis. Herein, we report a strategy to fabricate hollow ternary metal selenide (CoNiFe-Se) nanocubes derived from Prussian blue analogues (PBAs) by phytic acid etching and low-temperature gas-phase selenization. Due to the advantages of its multi-component composition and hollow structure, CoNiFe-Se exhibited a low overpotential of 275 mV@10 mA cm-2, a small Tafel slope of 62.3 mV dec-1 and a long-term stability of more than 80 h in 1.0 M KOH. This research offers an innovative idea and a straightforward technique for preparing hollow multimetallic selenide electrocatalysts derived from PBAs.

Chemical Vapor Deposition Strategy of Fe-N-C Nanotubes for the Oxygen Evolution Reaction

The conversion of metal-nitrogen-carbon (M-N-C) nanoparticles derived from conventional metal-organic frameworks (MOFs) into self-supporting and well-defined metal-nitrogen-carbon (M-N-C) superstructures is essential for various functional applications but remains a significant challenge. In this study, a versatile chemical vapor deposition (CVD) strategy is developed for solvent-free synthesis of self-supporting carbonaceous nanotubes doped with metal and nitrogen (MNCT). The stable carbonaceous nanotubes doped with Fe and N (FeNCT) fabricated here exhibit excellent electrocatalytic performances for the oxygen evolution reaction (OER) and outperform the carbonaceous film doped with Fe and N grown on carbon foil directly (FeNC/CF), which demonstrates the advantages of the superstructure of FeNCT. This strategy also provides a way to tailor the metal-nitrogen-carbon nanotubes (MNCT) catalyst according to the feature of the reactor and exhibits many advantages, such as wide applicability and facile scalability.

Distinct pathways for superoxide radical generation induced by Mn and Cu-based catalysts in electro-Fenton like process

Superoxide radicals (·O2-) has been regarded as one of the reactive oxygen species (ROS) for the elimination of complex contaminants via electro-Fenton like (EF-like) technology. However, the generation path of ·O2- is diverse, and the influence of the physicochemical properties of metals on the mechanism of ·O2- conversion is significant in the EF-like treatment of wastewater. Herein, metals (M = Mn, Cu) loaded zeolitic imidazolate frameworks catalytic materials (M-NC) were prepared for sulfamethoxazole (SMX) removal to analyze the effect of metals on the pathways of ·O2- generation. The removal kinetic rate of SMX by Cu-NC was 1.32 times higher than that of Mn-NC. Quenching experiments demonstrated that ·O2- is the most important oxidizing species to achieve SMX removal. The RRDE measurements and quantitative experiment on the concentration of H2O2 experiments indicated that Mn-NC was more inclined to generate ROS through activation of H2O2 and Cu-NC through other ways. Therefore, the transformation pathways of ·O2- in different catalytic systems were thoroughly analyzed. Electron paramagnetic resonance test and reactive oxygen species quenching experiments indicated that the pathway for ·O2- production of Mn-NC was O2 → H2O2 → ·O2-, and that of Cu-NC was O2 → ·O2-. The strategy of using Mn and Cu-based catalysts to investigate the mechanism of the ·O2- generation pathway provided a way to efficiently utilize the conversion of ·O2-.

Tunable B-Doped Cobalt Phosphide Nanosheets Engineered via Phosphorus Activation of Co-MOFs for High Efficiency Alkaline Water-Splitting

Introducing secondary heteroatoms and simultaneous in situ surface modification can enhance electrocatalysts by affecting their porosity for adjusting electrochemically active surface area (ECSA), number of active sites, and electronic properties, thus mitigating the sluggish kinetics of oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline media. Here, mesoporous 3D heterostructures of boron-doped cobalt phosphide@nitrogen-doped carbon nanosheet network arrays are successfully grown on Ni foam as free-standing bifunctional electrocatalysts with controlled phosphorous levels (B-CoPx@NC/NF, x = 0.25, 0.5, and 1). Boron doping induces the Co active sites to bind O* and OOH* intermediates. Meanwhile, an optimal phosphorous content also leads to ideal adsorption strength at each reaction step, satisfying the Sabatier principle well. The optimal B-CoP0.5@NC/NF requires low overpotentials of 248 mV for OER and 95 mV for HER with long-term stability. The B-CoP0.5@NC/NF (+/-) electrolyzer exhibits a low cell potential of 1.59 V at 10 mA cm-2 for overall water-splitting, with superior activity compared to the RuO2/NF(+)//20%Pt/NF(-) electrolyzer at high current densities above 50 mA cm-2. Such exceptional bifunctional activities are attributed to the modulated electronic structure, lower charge-transfer resistance, higher ECSA, and inductive effect of B-doping, thus boosting both OER and HER activities in alkaline media.

From design to efficiency: cobalt-based MOFs for efficient and stable electrocatalysis in hydrogen and oxygen evolution reactions

The pursuit of clean and renewable energy sources demands efficient technologies for hydrogen production, with water splitting emerging as a promising route. This study explores the use of Cobalt-based Metal-Organic Frameworks (Co-MOFs) as electrocatalysts for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Two distinct Co-MOFs, synthesized with the organic linkers 5-nitroisophthalic acid (X1) and pyridine-2,6-dicarboxylic acid (X2), were designed and evaluated for their electrocatalytic performance. X1 exhibited suboptimal morphology and a low specific surface area, resulting in lower catalytical activity and restricting its suitability for long-term applications. In contrast, X2 exhibited exceptional catalytic efficiency with remarkably low overpotentials for both HER (151.7 mV) and OER (180 mV), alongside superior long-term stability. The enhanced electrocatalytic performance of X2 is attributed to its optimized morphology, superior metal-active site distribution, and robust structural integrity, making it an ideal candidate for large-scale water splitting. This work paves the way for the development of high-performance MOF-based electrocatalysts, offering insights for advancing hydrogen generation technologies.

Creating Dual Active Sites in Ru-doped FeMn-MOF-74 for Efficient Overall Water Splitting

The design of well-engineered bifunctional electrocatalysts is crucial for achieving durable and efficient performance in overall water splitting. In this study, Ru-doped FeMn-MOF-74 itself has Ru sites and generates FeMnOOH under catalytic conditions, forming dual active sites for overall water splitting. Density functional theory (DFT) calculations demonstrate that the Ru dopants exhibit optimized binding strength for H* and enhanced hydrogen evolution reaction (HER) performance. Moreover, the Mn sites within FeMnOOH lower the energy barrier for the rate-determining step (from O* to OOH*), serving as the active centre for oxygen evolution reaction (OER). The incorporation of Ru significantly improves the electron transfer properties of FeMn-MOF-74 and enhances its water adsorption capacity, synergistically boosting its bifunctional activity. This strategy of designing dual active sites provides new insights into the development of bifunctional metal-organic frameworks (MOFs) for efficient overall water splitting.

Natural MOF-Like Photocatalytic Nanozymes Alleviate Tumor Pressure for Enhanced Nanodrug Penetration

In oncological nanomedicine, overcoming the dual-phase high interstitial pressure in the tumor microenvironment is pivotal for enhancing the penetration and efficacy of nanotherapeutics. The elevated tumor interstitial solid pressure (TISP) is largely attributed to the overaccumulation of collagen in the extracellular matrix, while the increased tumor interstitial fluid pressure (TIFP) stems from the accumulation of fluid due to the aberrant vascular architecture. In this context, metal-organic frameworks (MOFs) with catalytic efficiency have shown potential in degrading tumor interstitial components, thereby reducing interstitial pressure. However, the potential biotoxicity of the organic components of MOFs limits their clinical translation. To circumvent this, a MOF-like photocatalytic nanozyme, RPC@M, using naturally derived cobalt phytate (CoPA) and resveratrol (Res) is developed. This nanozyme not only facilitates the decomposition of water in the tumor interstitium under photoactivation to reduce TIFP, but also generates an abundance of reactive oxygen species through its peroxidase-like activity to exert cytotoxic effects on tumor cells. Moreover, Res contributes to the reduction of collagen deposition, thereby lowering TISP. The concurrent diminution of both TISP and TIFP by RPC@M leads to enhanced tumor penetration and potent antitumor activity, presenting an innovative approach in constructing tumor therapeutic nanozymes from natural products.

Interface Engineering of Network-Like 1D/2D (NHCNT/Ni─MOF) Hybrid Nanoarchitecture for Electrocatalytic Water Splitting

Here, integrated functional components into a hybrid heterostructure via highly stabilized network-like interconnected electronic nanoarchitecture of 1D N-doped holey-carbon nanotube (NHCNT) with 2D nickel─metal-organic framework (Ni─MOF) nanosheets are developed as high-performance electrocatalyst for overall water splitting. The NHCNT promoting electron transport pathways in electrocatalyst, and formation of holes in nanotubes further enables excellent diffusion of ions for promoting the overall reaction rate. An excellent combination of 1D/2D structure of NHCNT/Ni─MOF-4 electrocatalyst exhibits excellent oxygen evolution reaction (η10 = 207.8 mV, and Tafel = 62.6 mV dec-1) and reasonable hydrogen evolution reaction (η10 = 159.8 mV, and Tafel = 107.69 mV dec-1) activity with consistent and stable performance in a 1 m KOH. The highly interconnected network structure contains Ni2+ and Ni3+ species in the NHCNT/Ni─MOF-4 electrocatalyst, which possesses high specific surface area (SSA) (235.53 m2 g-1), electrochemically active surface area (ECSA) (796.2 cm2), mass activity (4.76 mA mg-1), and turnover frequency (3.99 × 10-2 s-1), which provide remarkable electrocatalytic performance via generating synergy between the NHCNT and Ni─MOF. For overall water splitting, NHCNT/Ni─MOF-4 attains a low cell voltage (1.77 V@10 mA cm-2).

S- and N-Co-Doped Carbon-Nanoplate-Encased Ni Nanoparticles Derived from Dual-Ligand-Assembled Ni-MOFs as Efficient Electrocatalysts for the Oxygen Evolution Reaction

To achieve the "double carbon" goal, it is urgent to reform the energy system. The oxygen evolution reaction (OER) is a vital semi-reaction for many new energy-storage and conversion devices. Metal nanoparticles embedded in heteroatom-doped carbon materials prepared by the pyrolyzing of metal-organic frameworks (MOFs) have been a key route to obtain high-performance electrochemical catalysts. Herein, a nanocatalyst embedding Ni nanoparticles into S- and N-co-doped carbon nanoplate (Ni NPs@SN-CNP) has been synthesized by pyrolysis of a Ni-MOF precursor. The prepared Ni NPs@SN-CNP exhibits superior oxygen evolution performance with an overpotential of 256 mV to attain 10 mA cm-2 and a low Tafel slope value of 95 mV dec-1. Moreover, a self-assembled overall-water-splitting cell with Ni NPs@SN-CNP/NF||Pt-C/NF achieves a low potential of 1.56 V at 10 mA cm-2 and a high cycling stability for at least 10 h. The improvement in this performance is benefit from its large surface area, unique morphology, and the nanostructure of the electrocatalyst. This study presents a novel and simple approach to designing high-performance OER catalysts.

Multifunctional metal-organic frameworks as promising nanomaterials for antimicrobial strategies

Bacterial infections pose a serious threat to human health. While antibiotics have been effective in treating bacterial infectious diseases, antibiotic resistance significantly reduces their effectiveness. Therefore, it is crucial to develop new and effective antimicrobial strategies. Metal-organic frameworks (MOFs) have become ideal nanomaterials for various antimicrobial applications due to their crystalline porous structure, tunable size, good mechanical stability, large surface area, and chemical stability. Importantly, the performance of MOFs can be adjusted by changing the synthesis steps and conditions. Pure MOFs can release metal ions to modulate cellular behaviors and kill various microorganisms. Additionally, MOFs can act as carriers for delivering antimicrobial agents in a desired manner. Importantly, the performance of MOFs can be adjusted by changing the synthesis steps and conditions. Furthermore, certain types of MOFs can be combined with traditional photothermal or other physical stimuli to achieve broad-spectrum antimicrobial activity. Recently an increasing number of researchers have conducted many studies on applying various MOFs for diseases caused by bacterial infections. Based on this, we perform this study to report the current status of MOF-based antimicrobial strategy. In addition, we also discussed some challenges that MOFs currently face in biomedical applications, such as biocompatibility and controlled release capabilities. Although these challenges currently limit their widespread use, we believe that with further research and development, new MOFs with higher biocompatibility and targeting capabilities can provide diversified treatment strategies for various diseases caused by bacterial infections.

Ni(II)-Dithiocarbamate and -diphosphine coordination complexes as pre-catalysts for electrochemical OER activity

Electrochemical water oxidation holds immense potential for sustainable energy generation, splitting water into clean-burning hydrogen and life-giving oxygen. However, a key roadblock lies in the sluggish nature of the oxygen evolution reaction (OER). Finding stable, cost-effective, and environmentally friendly catalysts with high OER efficiency is crucial to unlock this technology's full potential. Here, we have synthesized four new cationic heteroleptic Ni(II) complexes having the formula [Ni(S^S)(P^P)]PF6 (1-4) where S^S represents bidentate dithiocarbamate ligands (N,N-bis(benzyl)dithiocarbamate and N-benzyl-N-3-picolyldithiocarbamate) and P^P represents diphosphine ligands (1,2-bis(diphenylphosphino)ethane (dppe) and 1,1-bis(diphenylphosphino)ferrocene (dppf)). The complexes were characterized by UV-Vis, FT-IR, and multinuclear NMR spectroscopic techniques. Single crystal X-ray structures of all complexes are also reported. The molecular structures showed a distorted square planar geometry around the Ni(II) center defined by a bidentate S^S dithiolate chelating ligand and a P^P diphosphine chelating ligand. Interestingly, the complexes exhibit weak non-covalent interactions, contributing to the overall supramolecular structures. The role of complexes in water oxidation has been investigated electrochemically in a 1.0 M KOH solution after immobilization onto the surface of activated carbon cloth (CC). Detailed analyses revealed that the complexes are promising precatalysts for generating active Ni(OH)2/NiO(OH) as a true oxygen evolution reaction (OER) catalyst at CC upon anodic activation. Notably, the catalyst derived from complex 4@CC exhibited the highest OER activity with a Tafel slope of 93 mV per decade and reaching a current density of 10 mA cm-2 at a low overpotential of 250 mV in a 1.0 M KOH solution. This study reveals the significance of dithiocarbamate and diphosphine ligands in facilitating the conversion of Ni(II) complexes into highly active OER catalysts.

Revealing the role of 1T- & 2H- molybdenum Disulfide/Nickel sulfide heterojunction for efficient overall water splitting

In the ongoing quest for cost-effective and durable electrocatalysts for hydrogen production-a critical element of sustainable energy transformation-the 1T phase of Molybdenum Disulfide (MoS2) faces challenges due to its thermodynamic instability and the trade-off between efficiency and durability. Conversely, the 2H phase of MoS2, often disregarded in favor of the metallic 1T phase, suffers from its inert nature and limited active sites. To overcome these limitations, this study employs a straightforward hydrothermal synthesis strategy that couples both 1T and 2H phases of MoS2 with Ni3S2, forming 1T- and 2H- MoS2/Ni3S2 heterojunctions. Enhanced by Ni3S2's abundant active sites, improved electron transport capabilities, synergistic interface effects, and better structural stability, these heterojunctions achieve a high current density exceeding 500 mA cm-2 at low overpotentials, along with prolonged durability for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline electrolytes. Remarkably, an electrolyzer assembly utilizing 1T-MoS2/Ni3S2 as the cathode and 2H-MoS2/Ni3S2 as the anode demonstrates a competitive voltage of 1.58 V at 20 mA cm-2, showcasing superior performance in overall water splitting compared to other non-noble metal-based electrocatalysts. This study not only offers a viable method for synthesizing efficient and stable electrocatalysts for water splitting using transition metal-based heterogeneous structures but also addresses the fundamental challenges associated with 1T and 2H phases of MoS2.

Facile Synthesis of Selenium Nanoparticles for Enhanced Oxygen Evolution Reaction: Insights into Electrochemical and Photoelectrochemical Catalysis

Implementing a hydrogen economy on an industrial scale poses challenges, particularly in developing cost-effective and stable catalysts for water electrolysis. This study explores the catalytic potential of selenium nanoparticles (Se-NPs) synthesized via a simple chemical bath deposition method for electrochemical and photoelectrochemical (PEC) water splitting. The successful fabrication of Se-NPs on fluorine-doped tin oxide (FTO) electrodes has been confirmed using a wide range of analytical tools like X-ray diffraction, energy-dispersive X-ray spectroscopy, and scanning electron microscopy. Importantly, electrochemical measurements revealed superior electrocatalytic activity of the modified Se-NPs/FTO electrodes, with low overpotential (220 mV at 10 mA cm-2) and Tafel slope (90.13 mV dec-1), indicating faster reaction kinetics and reduced energy inputs for oxygen evolution reaction. Furthermore, the Se-NPs/FTO electrode was employed for PEC water splitting in Na2S electrolyte, showing a notable enhancement in photocurrent density with a difference of 700 μA cm-2 between light and dark conditions at 1.5 V vs RHE, demonstrating efficient light-driven hydrogen production. The overall findings of this work establish that the proposed Se-NPs/FTO electrodes are promising composites for both electrochemical and PEC performance, thereby providing insights into developing cost-effective catalysts for large-scale water splitting.

Strong electronic interaction enhanced electrocatalysis of copper phthalocyanine decorated Co-MOF-74 toward highly efficient oxygen evolution reaction

Metal-organic frameworks (MOFs) have been identified as promising electrocatalysts for the oxygen evolution reaction (OER). However, most of the reported MOFs have low electrical conductivity and poor stability, and therefore addressing these problems is crucial for achieving higher electrocatalytic performance. Meanwhile, direct observations of the electrocatalytic behavior, which is of great significance to the understanding of the electrocatalytic mechanism, remain highly challenging. Here, we report on a significant electrocatalytic performance enhancement of Co-MOF-74 for the OER after decoration by copper phthalocyanine (CuPc) molecules. Co-MOF-74@CuPc, synthesized by solvothermal reactions, displays a low overpotential of 293 mV and a robust long-term stability (70 h) at 10 mA cm-2. The enhancement has been attributed to strong electronic interaction between the π-conjugated CuPc molecule and Co-MOF-74, which promotes the electron transfer, increases the electrocatalytic active surface area and regulates the electronic structure during the OER process.

Metal-organic framework derived heterostructured phosphide bifunctional electrocatalyst for efficient overall water splitting

Developing high active and stable cost-effective bifunctional electrocatalysts for overall water splitting to produce hydrogen is of vital significance in clean and sustainable energy development. This work has prepared a novel porous unreported MOF (Ni-DPT) as a precursor to successfully synthesize a non-noble bifunctional NiCoP/Ni12P5@NF electrocatalyst through doping strategy and interface engineering. This catalyst is constructed by layered self-supporting arrays with heterojunction interface and rich nitrogen-phosphorus doping. Structural characterizations and the density function theory (DFT) calculations confirm that the interface effect of NiCoP/Ni12P5 heterojunction can regulate the electronic structure of the catalyst to optimize the Gibbs free energy of hydrogen (ΔGH*); simultaneously, the defect-rich layered nanoarrays can expose more active sites, shorten mass transfer distance, and generate a self-supporting structure for in-situ reinforcing the structural stability. As a result, this NiCoP/Ni12P5@NF catalyst exhibits favorable electrocatalytic performance, which simply needs overpotentials of 100 mV for HER and 310 mV for OER, respectively, at a current density of 10 mA·cm-2. The anion exchange membrane electrolyzer assembled with this NiCoP/Ni12P5@NF as both anode and cathode catalysts can operate stably for 200 h at a current density of 100 mA·cm-2 with an insignificant voltage decrease. This work may provide some inspiration for the further rational design of inexpensive non-noble multifunctional electrocatalysts and electrode materials for water splitting to generate hydrogen.

Designing a Novel C3-Fe-N Interface Local Coordination Microenvironment for Efficient Electrocatalytic Water Splitting

Developing single-atomic electrocatalysts (SACs) with high activity and stability for electrocatalytic water-splitting has been challenging. Moreover, the practical utilization of SACs is still far from meeting the the theoretical prediction. Herein a facile and easy scale-up fabrication method is proposed for designing a novel carbon-iron-nitrogen (C-Fe-N) electrocatalyst with a single atom electron bridge (C-Fe-N SAEBs), which exhibits lower overpotential and impedance than previously reported electrocatalysts. 0.8-C-Fe-N SAEBs exhibits significant activity and excellent stability in the bi-functional decomposition of water. The excellent performance of the C-Fe-N SAEBs electrocatalyst can be attributed to the strong coupling effect at the interface owing to the formation of a single atom C3-Fe-N local coordination microenvironment at the interface, which enhance the exposure of active sites and charge transfer, and reduced the adsorption energy barrier of intermediates. Theoretical calculation and synchrotron radiation analysis are performed to understand the mechanistic insights behind the experimental results. The results reveal that the active C3-Fe-N local coordination microenvironment at the interface not only improves water-splitting behavior but also provides a deeper understanding of local-interface geometry/electronic structure for improving the electrocatalytic activity. Thus, the proposed electrocatalyst, as well as the mechanistic insights into its properties, presents a significant stride toward practical application.

Novel interfaces for internet of wearable electrochemical sensors

The integration of wearable devices, the Internet of Things (IoT), and advanced sensing platforms implies a significant paradigm shift in technological innovations and human interactions. The IoT technology allows continuous monitoring in real time. Thus, Internet of Wearables has made remarkable strides, especially in the field of medical monitoring. IoT-enabled wearable systems assist in early disease detection that facilitates personalized interventions and proactive healthcare management, thereby empowering individuals to take charge of their wellbeing. Until now, physical sensors have been successfully integrated into wearable devices for physical activity monitoring. However, obtaining biochemical information poses challenges in the contexts of fabrication compatibility and shorter operation lifetimes. IoT-based electrochemical wearable sensors allow real-time acquisition of data and interpretation of biomolecular information corresponding to biomarkers, viruses, bacteria and metabolites, extending the diagnostic capabilities beyond physical activity tracking. Thus, critical heath parameters such as glucose levels, blood pressure and cardiac rhythm may be monitored by these devices regardless of location and time. This work presents versatile electrochemical sensing devices across different disciplines, including but not limited to sports, safety and wellbeing by using IoT. It also discusses the detection principles for biomarkers and biofluid monitoring, and their integration into devices and advancements in sensing interfaces.

Synergistic enhancement of oxygen vacancy enrichment and morphology regulation in CeO2-NiCo2O4 heterostructure catalysts for high-performance cathodes in direct borohydride-hydrogen peroxide fuel cells

Hydrogen peroxide (H2O2) emerges as a viable oxidant for fuel cells, necessitating the development of an efficient and cost-effective electrocatalyst for the hydrogen peroxide reduction reaction (HPRR). In this study, we synthesized a self-supporting, highly active HPRR electrocatalyst comprising two morphologically distinct components: CeO2-NiCo2O4 nanowires and CeO2-NiCo2O4 metal organic framework derivatives, via a two-step hydrothermal process followed by air calcination. X-ray diffraction and transmission electron microscopy analysis confirmed the presence of CeO2 and NiCo2O4, revealing the amalgamated interface between them. CeO2 exhibits multifunctionality in regulating the surface electronic configuration of NiCo2O4, fostering synergistic connections, and introducing oxygen deficiencies to enhance the catalytic efficacy in HPRR. Electrochemical measurements demonstrate a reduction current density of 789.9 mA·cm-2 at -0.8 V vs. Ag/AgCl. The assembly of direct borohydride-hydrogen peroxide fuel cell (DBHPFC) exhibits a peak power density of 45.2 mW·cm-2, demonstrating durable stability over a continuous operation period of 120 h. This investigation providing evidence that the fabrication of heterostructured catalysts based on CeO2 for HPRR is a viable approach for the development of high-efficiency electrocatalysts in fuel cell technology.

Vertical Conductive Metal-Organic Framework Single-Crystalline Nanowire Arrays for Efficient Electrocatalytic Hydrogen Evolution

The construction of crystalline metal-organic frameworks with regular architectures supportive of enhanced mass transport and bubble diffusion is imperative for electrocatalytic applications; however, this poses a formidable challenge. Here, a method is presented that confines the growth of nano-architectures to the liquid-liquid interface. Using this method, vertically oriented single crystalline nanowire arrays of an Ag-benzenehexathiol (BHT) conductive metal-organic framework (MOF) are fabricated via an "in-plane self-limiting and out-of-plane epitaxial growth" mechanism. This material has excellent electrocatalytic features, including highly exposed active sites, intrinsically high electrical conductivity, and superhydrophilic and superaerophobic properties. Leveraging these advantages, the carefully designed material demonstrates superior electrocatalytic hydrogen evolution activity, resulting in a low Tafel slope of 66 mV dec-1 and a low overpotential of 275 mV at a high current density of 1 A cm-2. Finite element analysis (FEA) and in situ microscopic verification indicates that the nanowire array structure significantly enhances the electrolyte transport kinetics and promotes the rapid release of gas bubbles. The findings highlight the potential of using MOF-based ordered nanoarray structures for advanced electrocatalytic applications.

Bimetal Metaphosphate/Molybdenum Oxide Heterostructure Nanowires for Boosting Overall Freshwater/Seawater Splitting at High Current Densities

Exploring excellent non-noble bifunctional electrocatalysts for freshwater/seawater splitting at high current densities has attracted extensive interest owing to strong anodic oxidation and severe chloride corrosion challenges. Herein, hierarchical bimetal Ni-Co metaphosphate/molybdenum oxide heterostructure nanowires (NiCoMoPO) are rationally designed and fabricated to efficiently boost oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline freshwater/seawater, where the favorable electronic structure from heterostructures, signified by X-ray absorption spectra, endows NiCoMoPO with the enhanced intrinsic activity, while its hierarchical nanowire structure and heterostructures provide abundant active sites. Additionally, the PO3 - improves the chloride-corrosion resistance and efficiently facilitates the OER kinetics verified by theoretical and experimental studies. Therefore, NiCoMoPO drives 1000 mA cm-2 at low overpotentials of 467 and 442 mV for OER and HER in alkaline freshwater respectively, as well as a small cell voltage of 2.135 V for overall freshwater splitting with robust durability of 300 h. Impressively, due to the strong corrosion resistance, at 500 mA cm-2 of overall seawater splitting, NiCoMoPO maintains almost 2.096 V for 1200 h, indicating promising practical applications. This work sheds light on the rational design and fabrication of outstanding electrocatalysts at high current densities of seawater/freshwater splitting.

Multilayer Porous Fe/Co-N-MWCNT Electrocatalyst For Rechargeable Zinc-Air Batteries

The design of efficient, stable, low-cost non-precious metal-based electrocatalysts with enhanced oxygen reduction reaction (ORR) activity has garnered significant attention in the scientific community. This study introduces a novel electrocatalyst, Fe/Co-N-MWCNT, synthesized through the in-situ growth of ZIF-8 and Fe/Co-Phen on multi-walled carbon nanotubes (MWCNTs), followed by pyrolysis at varying temperatures to optimize its properties. The inclusion of Fe and Co during the pyrolysis process facilitated the creation of metal active sites and Fe-Co, enhancing electron transfer and ORR activity. Compared to Pt/C (E1/2=0.854 V, JL=4.90 mA cm-2), Fe/Co-N-MWCNT exhibited a similar half-wave potential (E1/2=0.812 V) and an improved limiting current density (JL=5.37 mA cm-2). Moreover, Fe/Co-N-MWCNT displayed remarkable stability, showing only a 7 mV negative shift in E1/2 after 2000 cycles. Ampere response testing indicated a current decay of only 7.8 % for Fe/Co-N-MWCNT after 10000 s, while Pt/C experienced a decay of about 18.4 %. The exceptional catalytic stability of Fe/Co-N-MWCNT positions it as a promising candidate for rechargeable zinc-air batteries, attributed to its high pyridinic nitrogen content, unique structure, and abundant metal active sites.

Rise of Metal-Organic Frameworks: From Synthesis to E-Skin and Artificial Intelligence

Metal-organic frameworks (MOFs) have attained broad research attention in the areas of sensors, resistive memories, and optoelectronic synapses on the merits of their intriguing physical and chemical properties. In this review, recent progress on the synthesis of MOFs and their electronic applications is introduced and discussed. Initially, the crystal structures and properties of MOFs encompassing optical, electrical, and chemical properties are discussed in brief. Subsequently, advanced synthesis methods for MOFs are introduced, categorized into hydrothermal approach, microwave synthesis, mechanochemical synthesis, and electrochemical deposition. After that, the various roles of MOFs in widespread applications, including sensing, information storage, optoelectronic synapses, machine learning, and artificial intelligence, are discussed, highlighting their versatility and the innovative solutions they provide to long-standing challenges. Finally, an outlook on remaining challenges and a future perspective for MOFs are proposed.

Improved Alkaline Hydrogen Evolution Performance of Dealloying Fe75-xCoxSi12.5B12.5 Electrocatalyst

The electrocatalytic performance of a Fe65Co10Si12.5B12.5 Fe-based compounds toward alkaline hydrogen evolution reaction (HER) is enhanced by dealloying. The dealloying process produced a large number of nanosheets on the surface of NS-Fe65Co10Si12.5B12.5, which greatly increased the specific surface area of the electrode. When the dealloying time is 3 h, the overpotential of NS-Fe65Co10Si12.5B12.5 is only 175.1 mV at 1.0 M KOH and 10 mA cm-2, while under the same conditions, the overpotential of Fe65Co10Si12.5B12.5 is 215 mV, which is reduced. In addition, dealloying treated electrodes also show better HER performance than un-dealloying treated electrodes. With the increase in Co doping amount, the overpotential of the hydrogen evolution reaction decreases, and the hydrogen evolution activity is the best when the addition amount of Co is 10%. This work not only provides a basic understanding of the relationship between surface activity and the dealloying of HER catalysts, but also paves a new way for doping transition metal elements in Fe-based electrocatalysts working in alkaline media.

Interfacial Ir-V Direct Metal Bonding Enhanced Hydrogen Evolution Activity in Vanadium Oxides Supported Catalysts

Tuning the interfacial structure of metal oxide substrates is an essential strategy to induce electronic structure reconstruction of supported catalysts, which is of great importance in optimizing their catalytic activities. Herein, vanadium oxides-supported Ir catalysts (Ir-V2O3, Ir-VO2, and Ir-V2O5) with different interfacial bonding environments (Ir-V, Ir-Obri, and Ir-O, respectively) were investigated for hydrogen evolution reaction (HER). The regulating mechanism of the influence of different interfacial bonding environments on HER activity was investigated by both experimental results and computational evidence. Benefiting from the unique advantages of interfacial Ir-V direct metal bonds in Ir-V2O3, including enhanced electron transfer and electron donation ability, an optimized HER performance can be obtained with lowest overpotentials of 16 and 26 mV at 10 mA cm-2, high mass activities of 11.24 and 6.66 A mg-1, and turnover frequency values of 11.20 and 6.63 s-1, in acidic and alkaline conditions respectively. Furthermore, the assembled Ir-V2O3||RuO2 anion exchange membrane (AEM) electrolyzer requires only 1.92 V to achieve a high current density of 500 mA cm-2 and realizes long-term stability. This study provides essential insights into the regulating mechanism of interfacial chemical bonding in electrocatalysts and offers a new pathway to design noble metal catalysts for different applications.

Synthesis and Oxygen Evolution Reaction Application of a Co-Cd Based Bimetallic Metal-Organic Framework

In the realm of renewable energy technologies, the development of efficient and durable electrocatalysts is paramount, especially for applications like electrochemical water splitting. This research focuses on synthesizing a novel bimetallic metal-organic framework (BMMOF11) using earth-abundant elements, cobalt (Co) and cadmium (Cd). BMMOF11 showcases a distinctive structure with distorted octahedral chains of CoO and CdO, linked by benzene tricarboxylic acid (BTC). Our study primarily investigates the electrocatalytic efficiency of BMMOF11, particularly in water oxidation reactions. For practical analysis, BMMOF11 was anchored onto nickel foam, forming BMMOF11/NF, to evaluate its electrocatalytic properties. Electrochemical testing revealed that BMMOF11/NF begins water oxidation at an onset potential of 1.62 V versus RHE, demonstrating high activity with a lower overpotential of 0.4 V to achieve a current density of 10 mA/cm2. Moreover, BMMOF11/NF maintained stable water splitting performance, sustaining a current density of approximately 70 mA/cm2 under a voltage of 1.9 V relative to RHE. These findings indicate that BMMOF11/NF is a promising candidate for large-scale electrochemical water splitting, offering a blend of high activity and stability.

Optimized Transition Metal Phosphides for Direct Seawater Electrolysis: Current Trends

Seawater electrolysis presents a viable route for sustainable large-scale hydrogen production, yet its practical application is hindered by several technical challenges. These include the sluggish kinetics of hydrogen evolution, poor stability, cation deposition at the cathode, electrode corrosion, and competing chloride oxidation at the anode. To overcome these obstacles, the development of innovative electrocatalysts is crucial. Transition metal phosphides (TMPs) have emerged as promising candidates owing to their superior catalytic performance and tunable structural properties. This review provides a comprehensive analysis of recent progress in the structural engineering of TMPs tailored for efficient seawater electrolysis. We delve into the catalytic mechanisms underpinning hydrogen and oxygen evolution reactions in different pH conditions, along with the detrimental side reactions that impede hydrogen production efficiency. Several methods to prepare TMPs are then introduced. Additionally, detailed discussions on structural modifications and interface engineering tactics are presented, showcasing strategies to enhance the activity and durability of TMP electrocatalysts. By analyzing current research findings, our review aims to inform ongoing research endeavors and foster advancements in seawater electrolysis for practical and ecologically sound hydrogen generation.

Tunable Structured 2D Nanobiocatalysts: Synthesis, Catalytic Properties and New Horizons in Biomedical Applications

2D materials have offered essential contributions to boosting biocatalytic efficiency in diverse biomedical applications due to the intrinsic enzyme-mimetic activity and massive specific surface area for loading metal catalytic centers. Since the difficulty of high-quality synthesis, the varied structure, and the tough choice of efficient surface loading sites with catalytic properties, the artificial building of 2D nanobiocatalysts still faces great challenges. Here, in this review, a timely and comprehensive summarization of the latest progress and future trends in the design and biotherapeutic applications of 2D nanobiocatalysts is provided, which is essential for their development. First, an overview of the synthesis-structure-fundamentals and structure-property relationships of 2D nanobiocatalysts, both metal-free and metal-based is provided. After that, the effective design of the active sites of nanobiocatalysts is discussed. Then, the progress of their applied research in recent years, including biomedical analysis, biomedical therapeutics, pharmacokinetics, and toxicology is systematically highlighted. Finally, future research directions of 2D nanobiocatalysts are prospected. Overall, this review to provide cutting-edge and multidisciplinary guidance for accelerating future developments and biomedical applications of 2D nanobiocatalysts is expected.

Metal-Organic Framework Stability in Water and Harsh Environments from Data-Driven Models Trained on the Diverse WS24 Data Set

Metal-organic frameworks (MOFs) are porous materials with applications in gas separations and catalysis, but a lack of water stability often limits their practical use given the ubiquity of water. Consequently, it is useful to predict whether a MOF is water-stable before investing time and resources into synthesis. Existing heuristics for designing water-stable MOFs lack generality and limit the diversity of explored chemistry due to narrowly defined criteria. Machine learning (ML) models offer the promise to improve the generality of predictions but require data. In an improvement on previous efforts, we enlarge the available training data for MOF water stability prediction by over 400%, adding 911 MOFs with water stability labels assigned through semiautomated manuscript analysis to curate the new data set WS24. The additional data are shown to improve ML model performance (test ROC-AUC > 0.8) over diverse chemistry for the prediction of both water stability and stability in harsher acidic conditions. We illustrate how the expanded data set and models can be used with a previously developed activation stability model in combination with genetic algorithms to quickly screen ∼10,000 MOFs from a space of hundreds of thousands for candidates with multivariate stability (upon activation, in water, and in acid). We uncover metal- and geometry-specific design rules for robust MOFs. The data set and ML models developed in this work, which we disseminate through an easy-to-use web interface, are expected to contribute toward the accelerated discovery of novel, water-stable MOFs for applications such as direct air gas capture and water treatment.

Self-Reconstructed Metal-Organic Framework-Based Hybrid Electrocatalysts for Efficient Oxygen Evolution

Refining synthesis strategies for metal-organic framework (MOF)-based catalysts to improve their performance and stability in an oxygen evolution reaction (OER) is a big challenge. In this study, a series of nanostructured electrocatalysts were synthesized through a solvothermal method by growing MOFs and metal-triazolates (METs) on nickel foam (NF) substrates (named MET-M/NF, M = Fe, Co, Cu), and these electrocatalysts could be used directly as OER self-supporting electrodes. Among these electrocatalysts, MET-Fe/NF exhibited the best OER performance, requiring only an overpotential of 122 mV at a current density of 10 mA cm-2 and showing remarkable stability over 15 h. The experimental results uncovered that MET-Fe/NF underwent an in situ structural reconstruction, resulting in the formation of numerous iron/nickel (oxy)hydroxides with high OER activity. Furthermore, in a two-electrode water-splitting setup, MET-Fe/NF only required 1.463 V to achieve a current density of 10 mA cm-2. Highlighting its potential for practical applications. This work provides insight into the design and development of efficient MOF-based OER catalysts.

Unlocking the Potential of High Entropy Alloys in Electrochemical Water Splitting: A Review

The global pursuit of sustainable energy is focused on producing hydrogen through electrocatalysis driven by renewable energy. Recently, High entropy alloys (HEAs) have taken the spotlight in electrolysis due to their intriguing cocktail effect, broad design space, customizable electronic structure, and entropy stabilization effect. The tunability and complexity of HEAs allow a diverse range of active sites, optimizing adsorption strength and activity for electrochemical water splitting. This review comprehensively covers contemporary advancements in synthesis technique, design framework, and physio-chemical evaluation approaches for HEA-based electrocatalysts. Additionally, it explores design principles and strategies aimed at optimizing the catalytic activity, stability, and effectiveness of HEAs in hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and overall water splitting. Through an in-depth investigation of these aspects, the complexity inherent in constituent element interactions, reaction processes, and active sites associated with HEAs is aimed to unravel. Eventually, an outlook regarding challenges and impending difficulties and an outline of the future direction of HEA in electrocatalysis is provided. The thorough knowledge offered in this review will assist in formulating and designing catalysts based on HEAs for the next generation of electrochemistry-related applications.

Advances in metal-organic framework-based nanozymes in ROS scavenging medicine

Reactive oxygen species (ROS) play important roles in regulating various physiological functions in the human body, however, excessive ROS can cause serious damage to the human body, considering the various limitations of natural enzymes as scavengers of ROS in the body, the development of better materials for the scavenging of ROS is of great significance to the biomedical field, and nanozymes, as a kind of nanomaterials which can show the activity of natural enzymes. Have a good potential for the development in the area of ROS scavenging. Metal-organic frameworks (MOFs), which are porous crystalline materials with a periodic network structure composed of metal nodes and organic ligands, have been developed with a variety of active nanozymes including catalase-like, superoxide dismutase-like, and glutathione peroxidase-like enzymes due to the adjustability of active sites, structural diversity, excellent biocompatibility, and they have shown a wide range of applications and prospects. In the present review, we first introduce three representative natural enzymes for ROS scavenging in the human body, methods for the detection of relevant enzyme-like activities and mechanisms of enzyme-like clearance are discussed, meanwhile, we systematically summarize the progress of the research on MOF-based nanozymes, including the design strategy, mechanism of action, and medical application, etc. Finally, the current challenges of MOF-based nanozymes are summarized, and the future development direction is anticipated. We hope that this review can contribute to the research of MOF-based nanozymes in the medical field related to the scavenging of ROS.

Electronic redistribution through the interface of MnCo2O4-Ni3N nano-urchins prompts rapid In situ phase transformation for enhanced oxygen evolution reaction

One of the most coveted objectives in the realm of energy conversion technologies is the development of highly efficient and economically viable electrocatalysts for the oxygen evolution reaction. The commercialization of such techniques has thus far been impeded by their slow response kinetics. One of the many ways to develop highly effective electrocatalysts is to judiciously choose a coupling interface that maximizes catalyst performance. In this study, the in situ electrochemical phase transformation of MnCo2O4-Ni3N into MnCo2O4-NiOOH is described. The catalyst has an exceptional overpotential of 224 mV to drive a current density of 10 mA cm-2. Strong interfacial contact is seen in the MnCo2O4-Ni3N catalyst, leading to a considerable electronic redistribution between the MnCo2O4 and Ni3N phases. This causes an increase in the valence state of Ni, which makes it an active site for the adsorption of *OH, O*, and *OOH (intermediates). This charge transfer facilitates the rapid phase transformation to form NiOOH from Ni3N. At a higher current density of 300 mA cm-2, the catalyst remained stable for a period of 140 h. DFT studies also revealed that the in situ-formed NiOOH on the MnCo2O4 surface results in superior OER kinetics compared to that of NiOOH alone.

Multi-Active Sites Loaded NiCu-MOF@MWCNTs as a Bifunctional Electrocatalyst for Electrochemical Water Splitting Reaction

Water can be sustainably and ecologically converted by electrocatalysts into hydrogen and oxygen, which, in turn, can be converted into energy. However, the advancement of using water as green energy is hampered by limitations in the study of high-performance catalysts. The purpose of this study was to construct an electrocatalyst by anchoring well-dispersed multiwalled carbon nanotubes (MWCNTs) on nickel-copper (NiCu-MOF) nanoblocks through a simple solvothermal method. The synthesis of NiCu-MOF@MWCNTs demonstrated exceptional electrocatalytic performance for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in an alkaline medium. At 10 mA cm-2 in 1.0 M KOH, the OER and HER performance of the catalyst displays a relatively low overpotential, with only 220 and 78 mV, respectively. Furthermore, the catalytic activity remained unchanged for 24 h in 1.0 M KOH. This performance was superior to the majority of electrocatalysts that have been reported. This was achieved by utilizing the strong synergy that exists between MWCNTs and bimetallic (Ni-Cu) nano blocks present in the metal-organic framework. The enhanced electrocatalytic activity of the nanocomposite can be attributed to the synergistic impact caused by its various components.

MOF-based/derived catalysts for electrochemical overall water splitting

Water-splitting electrocatalysis has gained increasing attention as a promising strategy for developing renewable energy in recent years, but its high overpotential caused by the unfavorable thermodynamics has limited its widespread implementation. Therefore, there is an urgent need to design catalytic materials with outstanding activity and stability that can overcome the high overpotential and thus improve the electrocatalytic efficiency. Metal-organic frameworks (MOFs) based and/or derived materials are widely used as water-splitting catalysts because of their easily controlled structures, abundant heterointerfaces and increased specific surface area. Herein, some recent research findings on MOFs-based/derived materials are summarized and presented. First, the mechanism and evaluation parameters of electrochemical water splitting are described. Subsequently, advanced modulation strategies for designing MOFs-based/derived catalysts and their catalytic performance toward water splitting are summarized. In particular, the correlation between chemical composition/structural functionalization and catalytic performance is highlighted. Finally, the future outlook and challenges for MOFs materials are also addressed.

Manganese-Doped Bimetallic (Co,Ni)2P Integrated CoP in N,S Co-Doped Carbon: Unveiling a Compatible Hybrid Electrocatalyst for Overall Water Splitting

Rational design of highly efficient noble-metal-unbound electrodes for hydrogen and oxygen production at increased current density is crucial for robust water-splitting. A facile hydrothermal and room-temperature aging method is presented, followed by chemical vapor deposition (CVD), to create a self-sacrificed hybrid heterostructure electrocatalyst. This hybrid material, (Mn-(Co,Ni)2P/CoP/(N,S)-C), comprises manganese-doped cobalt nickel phosphide (Mn-(Co,Ni)2P) nanofeathers and cobalt phosphide (CoP) nanocubes embedded in a nitrogen and sulfur co-doped carbon matrix (N,S)-C on nickel foam. The catalyst exhibits excellent performance in both the hydrogen evolution reaction (HER; η10 = 61 mV) and oxygen evolution reaction (OER; η10 = 213 mV) due to abundant active sites, high porosity, and enhanced hetero-interface interaction between Mn-(Co2P-Ni2P) CoP, and (N,S)-C supported by significant synergistic effects observed among different phases through density functional theory (DFT) calculations. Impressively, (Mn-(Co,Ni)2P/CoP/(N,S)-C (+,-) shows an extra low cell voltage of 1.49 V@10 mA cm-2. Moreover, the catalyst exhibits remarkable stability at 100 and 300 mA cm-2 when operating as a single stack cell electrolyzer. The superior electrochemical activity is attributed to the enhanced electrode-electrolyte interface among the multiple phases of the hybrid structure.

Polyoxometalate-Structured Materials: Molecular Fundamentals and Electrocatalytic Roles in Energy Conversion

Polyoxometalates (POMs), a kind of molecular metal oxide cluster with unique physical-chemical properties, have made essential contributions to creating efficient and robust electrocatalysts in renewable energy systems. Due to the fundamental advantages of POMs, such as the diversity of molecular structures and large numbers of redox active sites, numerous efforts have been devoted to extending their application areas. Up to now, various strategies of assembling POM molecules into superstructures, supporting POMs on heterogeneous substrates, and POMs-derived metal compounds have been developed for synthesizing electrocatalysts. From a multidisciplinary perspective, the latest advances in creating POM-structured materials with a unique focus on their molecular fundamentals, electrocatalytic roles, and the recent breakthroughs of POMs and POM-derived electrocatalysts, are systematically summarized. Notably, this paper focuses on exposing the current states, essences, and mechanisms of how POM-structured materials influence their electrocatalytic activities and discloses the critical requirements for future developments. The future challenges, objectives, comparisons, and perspectives for creating POM-structured materials are also systematically discussed. It is anticipated that this review will offer a substantial impact on stimulating interdisciplinary efforts for the prosperities and widespread utilizations of POM-structured materials in electrocatalysis.

Nitrided Rhodium Nanoclusters with Optimized Water Bonding and Splitting Effects for pH-Universal H2-Production

The nitridation of noble metals-based catalysts to further enhance their hydrogen evolution reaction (HER) kinetics in neutral and alkaline conditions would be an effective strategy for developing high-performance wide pH HER catalysts. Herein, a facile molten urea method is employed to construct the nitrided Rh nanoclusters (RhxN) supported on N-doped carbon (RhxN-NC). The uniformly distributed RhxN clusters exhibited optimized water bonding and splitting effects, therefore resulting in excellent pH-universal HER performance. The optimized RhxN-NC catalyst only requires 8, 12, and 109 mV overpotentials to reach the current density of 10 mA cm-2 in 0.5 M H2SO4, 1.0 M KOH, and 1.0 M PBS electrolytes, respectively. The spectroscopic characterizations and theoretical calculation further confirm the vital role of Rh-N moieties in RhxN clusters in improving the transfer of electrons and facilitating the generation of H2. This work not only provides a suitable nitridation method for noble metal species in mild conditions but also makes a breakthrough in synthesizing noble metal nitrides-based electrocatalysts to achieve an exceptional wide-pH HER performance and other catalysis.

In Situ Exfoliation Growth Strategy Realizing Controlled Synthesis of 3D to 2D MOF Materials as High-Performance Electrochemical Biosensors

Two-dimensional (2D) metal-organic framework (MOF) nanosheets with large surface area, ultrathin thickness, and highly accessible active sites have attracted great research attention. Developing efficient approaches to realize the controllable synthesis of well-defined 2D MOFs with a specific composition and morphology is critical. However, it is still a significant challenge to construct thin and uniform 2D MOF nanosheets and resolve the reagglomeration as well as poor stability of target 2D MOF products. Here, an "in situ exfoliation growth" strategy is proposed, where a one-step synthetic process can realize the successful fabrication of PBA/MIL-53(NiFe)/NF nanosheets on the surface of nickel foam (NF) via in situ conversion and exfoliation growth strategies. The PBA/MIL-53(NiFe)/NF nanosheets combine the individual advantages of MOFs, Prussian blue analogues (PBAs), and 2D materials. As expected, the resulting PBA/MIL-53(NiFe)/NF as a glucose electrode exhibits an extremely high sensitivity of 25.74 mA mM-1 cm-2 in a very wide concentration range of 180 nM to 4.8 μM. The present exciting work provides a simple and effective strategy for the construction of high-performance nonenzymatic glucose electrochemical biosensors.

A Ce-CuZn catalyst with abundant Cu/Zn-OV-Ce active sites for CO2 hydrogenation to methanol

CO2 hydrogenation to chemicals and fuels is a significant approach for achieving carbon neutrality. It is essential to rationally design the chemical structure and catalytic active sites towards the development of efficient catalysts. Here we show a Ce-CuZn catalyst with enriched Cu/Zn-OV-Ce active sites fabricated through the atomic-level substitution of Cu and Zn into Ce-MOF precursor. The Ce-CuZn catalyst exhibits a high methanol selectivity of 71.1% and a space-time yield of methanol up to 400.3 g·kgcat-1·h-1 with excellent stability for 170 h at 260 °C, comparable to that of the state-of-the-art CuZnAl catalysts. Controlled experiments and DFT calculations confirm that the incorporation of Cu and Zn into CeO2 with abundant oxygen vacancies can facilitate H2 dissociation energetically and thus improve CO2 hydrogenation over the Ce-CuZn catalyst via formate intermediates. This work offers an atomic-level design strategy for constructing efficient multi-metal catalysts for methanol synthesis through precise control of active sites.

Spatial Heterogeneity and Strong Coupling of FeII /FeIII in an Individual Metal-Organic Framework Nanoparticle for Efficient CO2 Photoreduction

The synthesis and characterization of an FeII /FeIII metal-organic framework (MOF) nanocrystal with spatial heterogeneity that arises from the non-uniform distribution of different valence states is disclosed. The FeII /FeIII -Ni Prussian blue analog (PBA) delivers superior photocatalytic performance in the selective CO2 reduction reaction thanks to the strong FeII /FeIII coupling, with CO yield up to 12.27 mmol g-1 h-1 and 90.6% selectivity under visible-light irradiation. Density functional theory calculation and experimental studies prove that the spatial heterogeneity of FeII /FeIII in the individual MOF nanocrystal not only directs and expedites the charge transfer within a catalyst particle but also creates the heterogeneity of catalytically-active Ni sites for efficient CO2 photoreduction. The current findings add to a growing literature of materials with compositional heterogeneity and provide a reference for future research.

Ultrafine Iridium Nanoparticles Anchored on Co-Based Metal-Organic Framework Nanosheets for Robust Hydrogen Evolution in Alkaline Media

A highly promising electrocatalyst has been designed and prepared for the hydrogen evolution reaction (HER). This involves incorporating well-dispersed Ir nanoparticles into a cobalt-based metal-organic framework known as Co-BPDC [Co(bpdc)(H2O)2, BPDC: 4,4'-biphenyldicarboxylic acid]. Ir@Co-BPDC demonstrates exceptional HER activity in alkaline media, surpassing both commercial Pt/C and recent noble-metal catalysts. Theoretical results indicate that electron redistribution, induced by interfacial bonds, optimizes the adsorption energy of water and hydrogen, thereby enhancing our understanding of the superior properties of Ir@Co-BPDC for HER.

Construction of bimetallic phosphide nanostructures with in situ growth, reduction, and phosphidation of ultra-thin graphene layers as highly efficient catalysts towards the OER

We present a novel approach for the in situ growth of bimetallic silicate onto ultrathin graphene, followed by in situ reduction and phosphorization to obtain uniformly dispersed bimetallic phosphides (rGO@FeNiP/rGO@FeCoP) on graphene layers. Unlike the traditional simple composites of single-metallic phosphides and carbon materials, the bimetallic synergy of rGO@FeNiP/rGO@FeCoP obtained through in situ growth, reduction, phosphorization, and alkaline treatment exhibits a large surface area, more nanopores and defects, and more active sites, facilitates electrolyte diffusion and gas release, accelerates electron transfer and enhances electrocatalytic oxygen evolution reaction (OER) performance. Furthermore, the continuous carbon layer architecture surrounding FeNiP/FeCoP provides structural support, improving catalyst stability. We have investigated the effect of different proportions of bimetals on electrocatalytic performance, providing a rational design and synthesis strategy for carbon-based bimetallic phosphides as a promising electrocatalyst for the OER.

Hollow Spherical Heterostructured FeCo-P Catalysts Derived from MOF-74 for Efficient Overall Water Splitting

The design of catalysts with tunable active sites in heterogeneous interface structures is crucial for addressing challenges in the water-splitting process. Herein, a hollow spherical heterostructure FeCo-P is successfully prepared by hydrothermal and phosphorization methods. This hollow structure, along with the heterogeneous interface between Co2 P and FeP, not only facilitates the exposure of more active sites, but also increases the contact area between the catalyst and the electrolyte, as well as shortens the distance for mass/electron transfer. This enhancement promotes electron transfer to facilitate water decomposition. FeCo-P exhibits excellent hydrogen evolution (HER) and oxygen evolution (OER) performance when reaching @ 10 mA cm-2 in 1 mol L-1  KOH, with overpotentials of 131/240 mV for HER/OER. Furthermore, when FeCo-P is used as both the cathode and anode for overall water splitting (OWS), it only requires low voltages of 1.49, 1.55, and 1.57 V to achieve CDs of 10, 100, and 300 mA cm-2 , respectively. Density functional theory calculations indicate that constructing a Co2 P and FeP heterogeneous interface with good lattice matching can facilitate electron redistribution, thereby enhancing the electrocatalytic performance of OWS. This work opens up new possibilities for the rational design of efficient water electrolysis catalysts derived from MOFs.

Metal Alloys-Structured Electrocatalysts: Metal-Metal Interactions, Coordination Microenvironments, and Structural Property-Reactivity Relationships

Metal alloys-structured electrocatalysts (MAECs) have made essential contributions to accelerating the practical applications of electrocatalytic devices in renewable energy systems. However, due to the complex atomic structures, varied electronic states, and abundant supports, precisely decoding the metal-metal interactions and structure-activity relationships of MAECs still confronts great challenges, which is critical to direct the future engineering and optimization of MAECs. Here, this timely review comprehensively summarizes the latest advances in creating the MAECs, including the metal-metal interactions, coordination microenvironments, and structure-activity relationships. First, the fundamental classification, design, characterization, and structural reconstruction of MAECs are outlined. Then, the electrocatalytic merits and modulation strategies of recent breakthroughs for noble and non-noble metal-structured MAECs are thoroughly discussed, such as solid solution alloys, intermetallic alloys, and single-atom alloys. Particularly, unique insights into the bond interactions, theoretical understanding, and operando techniques for mechanism disclosure are given. Thereafter, the current states of diverse MAECs with a unique focus on structural property-reactivity relationships, reaction pathways, and performance comparisons are discussed. Finally, the future challenges and perspectives for MAECs are systematically discussed. It is believed that this comprehensive review can offer a substantial impact on stimulating the widespread utilization of metal alloys-structured materials in electrocatalysis.

Ru nanoclusters anchored on boron- and nitrogen-doped carbon for a highly efficient hydrogen evolution reaction in alkaline seawater

Electrochemical seawater splitting is an intriguing strategy for green hydrogen production. Constructing advanced electrocatalysts for the hydrogen evolution reaction (HER) in seawater is extremely demanded for accelerating the sluggish kinetic process. Herein, a Ru nanocluster anchored on boron- and nitrogen-doped carbon (Ru/NBC) catalyst was successfully synthesized for the HER in alkaline/seawater electrolytes. Remarkably, Ru/NBC exhibits outstanding activity and durability, delivering low overpotentials@10 mA cm-2 in 1.0 M KOH (30 mV) and 1.0 M KOH + seawater electrolyte (35 mV), outperforming Pt/C, Ru/NC, Ru/BC and Ru/C. Additionally, Ru/NBC also provides a high specific activity of 0.093 mA cm-2ECSA at an overpotential of 150 mV, which is higher than those of Ru/NC, Ru/BC and Ru/C, respectively. Density functional theory calculation results demonstrate that the Ru-B formed interfacial chemical bond can regulate the electronic structure of Ru active sites of Ru/NBC, which can facilitate the adsorption of water and hydrogen in alkaline media. This work provides a feasible strategy to fabricate outstanding electrocatalysts for the HER in alkaline/alkaline seawater electrolytes.

MOF-on-MOF-Derived Ultrafine Fe2P-Co2P Heterostructures for High-Efficiency and Durable Anion Exchange Membrane Water Electrolyzers

The alkaline hydrogen evolution reaction (HER) in an anion exchange membrane water electrolyzer (AEMWE) is considered to be a promising approach for large-scale industrial hydrogen production. Nevertheless, it is severely hampered by the inability to operate tolerable HER catalysts consistently under low overpotentials at ampere-level current densities. Here, we develop a universal ligand-exchange (MOF-on-MOF) modulation strategy to synthesize ultrafine Fe2P and Co2P nanoparticles, which are well anchored on N and P dual-doped carbon porous nanosheets (Fe2P-Co2P/NPC). In addition, benefiting from the downshift of the d-band center and the interfacial Co-P-Fe bridging, the electron-rich P site is triggered, which induces the redistribution of electron density and the swapping of active centers, lowering the energy barrier of the HER. As a result, the Fe2P-Co2P/NPC catalyst only requires a low overpotential of 175 mV to achieve a current density of 1000 mA cm-2. The solar-driven water electrolysis system presents a record-setting and stable solar-to-hydrogen conversion efficiency of 20.36%. Crucially, the catalyst could stably operate at 1000 mA cm-2 over 1000 h in a practical AEMWE at an estimated cost of US$0.79 per kilogram of H2, which achieves the target (US$2 per kg of H2) set by the U.S. Department of Energy (DOE).

Integration of Triphenylene-Based Conductive Metal-Organic Frameworks into Carbon Nanotube Electrodes for Boosting Nonenzymatic Glucose Sensing

The rational design and preparation of conductive metal-organic frameworks (MOFs) are alluring and challenging pathways to develop active catalysts toward electrocatalytic glucose oxidation. The hybridization of conductive MOFs with carbon nanotubes (CNTs) in the form of a composite can greatly improve the electrocatalytic performance. Herein, a facile one-step synthetic strategy is utilized to fabricate a Ni3(HHTP)2/CNT (HHTP = 2,3,6,7,10,11-hexahydroxytriphenylene) composite for nonenzymatic detection of glucose in an alkaline solution. The Ni3(HHTP)2/CNT composite, as an electrochemical glucose sensor material, exhibits superior electrocatalytic activity toward glucose oxidation with a wide detection range of up to 3.9 mM, a low detection limit of 4.1 μM (signal/noise = 3), a fast amperometric response time of <2 s, and a high sensitivity of 4774 μA mM-1 cm-2, surpassing the performance of some recently reported nonenzymatic transition-metal-based glucose sensors. In addition, the composite sensor also shows outstanding selectivity, robust long-term electrochemical stability, favorable anti-interference properties, and good reproducibility. This work displays the effectiveness of enhancing the electrocatalytic performance toward glucose detection by combing conductive MOFs with CNTs, thereby opening up an applicable and encouraging approach for the design of advanced nonenzymatic glucose sensors.