High-Performance Microsized Si Anodes for Lithium-Ion Batteries: Insights into the Polymer Configuration Conversion Mechanism

Reduced Volume Expansion of Micron-Sized SiOx via Closed-Nanopore Structure Constructed by Mg-Induced Elemental Segregation

The inherently huge volume expansion during Li uptake has hindered the use of Si-based anodes in high-energy lithium-ion batteries. While some pore-forming and nano-architecting strategies show promises to effectively buffer the volume change, other parameters essential for practical electrode fabrication, such as compaction density, are often compromised. Here we propose a new in situ Mg doping strategy to form closed-nanopore structure into a micron-sized SiOx particle at a high bulk density. The doped Mg atoms promote the segregation of O, so that high-density magnesium silicates form to generate closed nanopores. By altering the mass content of Mg dopant, the average radii (ranged from 5.4 to 9.7 nm) and porosities (ranged from 1.4 % to 15.9 %) of the closed pores are precisely adjustable, which accounts for volume expansion of SiOx from 77.8 % to 22.2 % at the minimum. Benefited from the small volume variation, the Mg-doped micron-SiOx anode demonstrates improved Li storage performance towards realization of a 700-(dis)charge-cycle, 11-Ah-pouch-type cell at a capacity retention of >80 %. This work offers insights into reasonable design of the internal structure of micron-sized SiOx and other materials that undergo conversion or alloying reactions with drastic volume change, to enable high-energy batteries with stable electrochemistry.

Tailored Yolk-Shell Design to Silicon Microparticles via Scalable and Template-Free Synthesis for Superior Lithium Storage

Micrometer-sized Si particles are beneficial to practical lithium-ion batteries in regard to low cost and high volumetric energy density in comparison with nanostructured Si anodes. However, both the issues of electrical contact loss and overgrowth of solid electrolyte interface for microscale Si induced by colossal volume change still remain to be addressed. Herein, a scalable and template-free method is introduced to fabricate yolk-shell structured Si anode from commercially available Si microparticles. The void is created via a one-step alkali etching process with the remaining silicon core as the yolk, and a double-walled shell is formed from simultaneous in situ growth of the conformal native oxide layer and subsequent carbon coating. In this configuration, the well-defined void spaces allow the Si core to expand without compromising structural integrity, while the double-walled shell acts as a static capsule to confine silicon fragments despite likely particle fracture. Therefore, electrical connectivity is maintained on both the particle and electrode level during deep galvanostatic cycling, and the solid-electrolyte interface is stabilized on the shell surface. Owing to the benefits of tailored design, excellent cycling stability (capacity retention of 95% after 100 cycles) and high coulombic efficiency (99.5%) are realized in a practical full-cell demonstration.

Constructing Matching Cathode-Anode Interphases with Improved Chemo-mechanical Stability for High-Energy Batteries

Coupling Ni-rich layered oxide cathodes with Si-based anodes is one of the most promising strategies to realize high-energy-density Li-ion batteries. However, unstable interfaces on both cathode and anode sides cause continuous parasitic reactions, resulting in structural degradation and capacity fading of full cells. Herein, lithium tetrafluoro(oxalato) phosphate is synthesized and applied as a multifunctional electrolyte additive to mitigate irreversible volume swing of the SiOx anode and suppress undesirable interfacial evolution of the LiNi0.83Co0.12Mn0.05O2 (NCM) cathode simultaneously, resulting in improved cycle life. Benefiting from its desirable redox thermodynamics and kinetics, the molecularly tailored additive facilitates matching interphases consisting of LiF, Li3PO4, and P-containing macromolecular polymer on both the NCM cathode and SiOx anode, respectively, modulating interfacial chemo-mechanical stability as well as charge transfer kinetics. More encouragingly, the proposed strategy enables 4.4 V 21700 cylindrical batteries (5 Ah) with excellent cycling stability (92.9% capacity retention after 300 cycles) under practical conditions. The key finding points out a fresh perspective on interfacial optimization for high-energy-density battery systems.

Enabling high-performance lithium iron phosphate cathodes through an interconnected carbon network for practical and high-energy lithium-ion batteries

The olivine lithium iron phosphate (LFP) cathode has gained significant utilization in commercial lithium-ion batteries (LIBs) with graphite anodes. However, the actual capacity and rate performance of LFP still require further enhancement when combined with high-capacity anodes, such as silicon (Si) anodes, to achieve high-energy LIBs. In this study, we introduce a gelatin-derived carbon network into a nanosized LFP cathode without the need for additional binding and conductive agents, employing a simple and cost-effective method. The resulting cathode exhibits an extremely high LFP content (∼92.3 wt%), enabling it to show a high real capacity of 159.7 mAh/g at 0.2 C in half cells. Additionally, the interconnected carbon network effectively facilitates electron and Li+ transport, providing rapid pathways within the LFP nanoparticles. Consequently, the cathode exhibits superior rate capability (107.3 mAh/g at 10 C) and good cycling performance (with a capacity retention of ∼ 80 % after 500 cycles). To further assess its practical viability, the LFP cathode is assembled into a full cell utilizing a Si-based anode with a N/P ratio of 1.1. The resulting full cell delivers a significantly high energy density of 419.7 Wh kg-1, coupled with prolonged cycle life, highlighting its promising prospects for practical applications.

Unraveling the Fundamental Mechanism of Interface Conductive Network Influence on the Fast-Charging Performance of SiO-Based Anode for Lithium-Ion Batteries

HIGHLIGHTS

Influence of interface conductive network on ionic transport and mechanical stability under fast charging is explored for the first time. The mitigation of interface polarization is precisely revealed by the combination of 2D modeling simulation and Cryo-TEM observation, which can be attributed to a higher fraction formation of conductive inorganic species in bilayer SEI, and primarily contributes to a linear decrease in ionic diffusion energy barrier. The improved stress dissipation presented by AFM and Raman shift is critical for the linear reduction in electrode residual stress and thickness swelling. Progress in the fast charging of high-capacity silicon monoxide (SiO)-based anode is currently hindered by insufficient conductivity and notable volume expansion. The construction of an interface conductive network effectively addresses the aforementioned problems; however, the impact of its quality on lithium-ion transfer and structure durability is yet to be explored. Herein, the influence of an interface conductive network on ionic transport and mechanical stability under fast charging is explored for the first time. 2D modeling simulation and Cryo-transmission electron microscopy precisely reveal the mitigation of interface polarization owing to a higher fraction of conductive inorganic species formation in bilayer solid electrolyte interphase is mainly responsible for a linear decrease in ionic diffusion energy barrier. Furthermore, atomic force microscopy and Raman shift exhibit substantial stress dissipation generated by a complete conductive network, which is critical to the linear reduction of electrode residual stress. This study provides insights into the rational design of optimized interface SiO-based anodes with reinforced fast-charging performance.

Mechanochemical reduction of clay minerals to porous silicon nanoflakes for high-performance lithium-ion battery anodes

Hierarchically porous silicon nanoflakes were synthesized from natural talc via a mechanochemical reduction method, which showed great potential in the scalable production of silicon nanoflakes due to the abundant precursor and facile strategy. The unique layered structure and chemical composition of talc enabled the formation of two-dimensional nanostructured silicon without any additional templates. As lithium-ion battery anodes, the silicon nanoflakes showed excellent electrochemical properties.

Scalable Synthesis of a Porous Micro Si/Si-Ti Alloy Anode for Lithium-Ion Battery from Recovery of Titanium-Blast Furnace Slag

The extensive utilization of Si-anode-based lithium-ion batteries faces obstacles due to their substantial volume expansion, limited intrinsic conductivity, and low initial Coulombic efficiency (ICE). In this study, we present a straightforward, cost-effective, yet scalable method for producing a porous micro Si/Si-Ti alloy anode. This method utilizes titanium-blast furnace slag (TBFS) as a raw material and combines aluminothermic reduction with acid etching. By adjusting the Al:TBFS ratio, the specific surface area of the material can be facilely tailored, ranging from 25.89 to 43.23 m2 g-1, enhancing the ICE from 78.2 to 85.5%. The incorporation of the Si-Ti alloy skeleton and porous structure contributes to the enhanced cyclic stability (capacity retention from 50.7 to 96.9%) and conductivity (Rct from 107.7 to 76.6 Ω). The Si/Si-Ti anode exhibits excellent electrochemical performance, including delivering a specific capacity of 1161 mAh g-1 at 200 mA g-1 after 200 cycles and 1112 mAh g-1 at 500 mA g-1 after 100 cycles, with an improved ICE of 81.2%. This study introduces a successful methodology for designing novel Si anodes from recycling waste materials, providing valuable insights for future advancements in this area.

Unleashing the Potential of High-Capacity Anodes through an Interfacial Prelithiation Strategy

The scalable development of an environmentally adaptive and homogeneous Li+ supplementary route remains a formidable challenge for the existing prelithiation technologies, restricting the full potential of high-capacity anodes. In this study, we present a moisture-tolerant interfacial prelithiation approach through casting a hydrophobic poly(vinylidene-co-hexafluoropropylene) membrane blended with a deep-lithiated alloy (Li22Si5@C/PVDF-HFP) onto Si based anodes. This strategy could not only extend to various high-capacity anode systems (SiOx@C, hard carbon) but also align with industrial roll-to-roll assembly processes. By carefully adjusting the thickness of the prelithiation layer, the densely packed Si@C electrode (4.5 mAh cm-2) exhibits significantly improved initial Coulombic efficiency until a close-to-unit value, as well as extreme moisture tolerance (60% relative humidity). Furthermore, it achieves more than 10-fold enhancement of ionic conductivity across the electrode. As pairing the prelithiated Si@C anode with the LiNi0.8Co0.1Mn0.1O2 cathode, the 2 Ah pouch-format prototype balances an energy density of ∼371 Wh kg-1 and an extreme power output of 2450 W kg-1 as well as 83.8% capacity retention for 1000 cycles. The combined operando phase tracking and spatial arrangement analysis of the intermediate alloy elucidate that the enhanced Li utilization derives from the gradient stress dissipation model upon a spontaneous Li+ redistribution process.

Sponge-Like Porous-Conductive Polymer Coating for Ultrastable Silicon Anodes in Lithium-Ion Batteries

Urgent calls for reversible cycling performance of silicon (Si) requires an efficient solution to maintain the silicon-electrolyte interface stable. Herein, a conductive biphenyl-polyoxadiazole (bPOD) layer is coated on Si particles to enhance the electrochemical process and prolong the cells lifespan. The conformal bPOD coatings are mixed ionicelectronic conductors, which not only inhibit the infinite growth of solid electrolyte interphase (SEI) but also endow electrodes with outstanding ion/electrons transport capacity. The superior 3D porous structure in the continuous phase allows the bPOD layers to act like a sponge to buffer volume variation, resulting in high structural stability. The in situ polymerized bPOD coating and it-driven thin LiF-rich SEI layer remarkably improve the lithium storage performance of Si anodes, showing a high reversible specific capacity of 1600 mAh g-1 even after 500 cycles at 1 A g-1 along with excellent rate capacity of over 1500 mAh g-1 at 3 A g-1 . It should be noticed that a long cycle life of 800 cycles with 1065 mAh g-1 at 3 A g-1 can also be achieved with a capacity retention of more than 80%. Therefore,  we  believe this unique polymer coating design paves the way for the widespread adoption of next-generation lithium-ion batteries.

Electrochemical Enhancement of Lithium-Ion Diffusion in Polypyrrole-Modified Sulfurized Polyacrylonitrile Nanotubes for Solid-to-Solid Free-Standing Lithium-Sulfur Cathodes

The energy density of lithium-sulfurized polyacrylonitrile (Li-SPAN) batteries has chronically suffered from low sulfur content. Although a free-standing electrode can significantly reduce noncapacity mass contribution, the slow bulk reaction kinetics still constrain the electrochemical performance. In this regard, a novel electrochemically active additive, polypyrrole (PPy), is introduced to construct PAN nanotubes as a sulfur carrier. This hollow channel greatly facilitates charge transport within the electrode and increases the sulfur content. Both electrochemical tests and simulations show that the SPANPPy-1% cathode possesses a larger lithium-ion diffusion coefficient and a more homogeneous phase interface than the SPAN cathode. Consequently, significantly improved capabilities and rate properties are achieved, as well as decent exportations under high-sulfur-loading or lean-electrolyte conditions. In-situ and semi-situ characterizations are further performed to demonstrate the nucleation growth of lithium sulfide and the evolution of the electrode surface structure. This type of electrochemically active additive provides a well-supported implementation of high-energy-density Li-S batteries.

A Spidroin-Inspired Hierarchical-Structure Binder Achieves Highly Integrated Silicon-Based Electrodes

As a promising component for next-generation high-energy lithium-ion batteries, silicon-based electrodes have attracted increasing attention by virtue of their ultrahigh theoretical specific capacities. Nevertheless, fast capacity fading posed by tremendous silicon-based electrode volume changes during cycling remains a huge challenge before large-scale applications. In this work, an aqueous-oil binary solution based blend (AOB) binder characterized by a spidroin-like hierarchical structure for tolerating the huge volume changes of silicon-based electrodes is developed. In the AOB binder, the polymer, containing hydrophobic tetrazole groups, denoted as PPB, and the water-soluble amorphous poly(acrylic acid), mimick the β-sheet and α-helix structure of spidroin, respectively. Benefitting from such biomimetic design, the AOB binder enables both high tensile strength and elasticity, and strong electrode adhesion, therefore apparently stabilizing the silicon-based electrode structure and rendering prolonged electrode cycle life. Such a strategy endows 3.3 Ah soft package cells assembled with Si/C composite anode and NCM811 cathode with a discharge specific capacity of 2.92 Ah after 700 cycles. This work marks a milestone in developing state-of-the-art silicon-based electrodes toward high-energy-density lithium-battery applications.

Accelerated Capacity and Cycling Performance via Facile Instantaneous Precipitation Induced Amorphization for Lithium-Ion Batteries

Conversion-alloying anodes have garnered escalating attention with high theoretical capacity, however, they are seriously hindered by large volume distortion and capacity fading. To counter, structural modification needs more exploration. Herein, advantageous structure and high-performance are realized in new amorphous PbSb2 O6 (PSO-a) nanosphere via facile instantaneous precipitation induced amorphization; conversion-alloying mechanism endows it with prominent lithium-storage capability; nanostructure can shorten ion-transfer distance and accommodate volume change outside the bulk of PSO-a; and loosely-stacked isotropic amorphous structure can enhance kinetics both at electrode/electrolyte interfaces and in the bulk. Volume change is synergistically stabilized from within to outside the bulk, leading to accelerated capacity and cycling. As expected, when employed in half-cells with 1 m LiPF6 in ethylene carbonate/diethyl carbonate/dimethyl carbonate/fluoroethylene carbonate (3:3:3:1 by mass) as electrolyte, glass microfiber filter as separator, and pure lithium foil as counter electrode, it realizes eminent performance with high specific capacity of 1512.6 mA h g-1 at 0.1 A g-1 and 755.1 mA h g-1 after 1000 cycles at 3 A g-1 . To the best of the authors' knowledge, this is the first time PbSb2 O6 is utilized as high-performance anode for lithium-ion batteries. Furthermore, this facile strategy provides a promising direction for high-performance amorphous anode material.

Interphasial Pre-lithiation and Reinforcement of Micro-Si Anode through Fluorine-free Electrolytes

Micro-sized silicon (mSi) anodes offer advantages in cost and tap density over nanosized counterparts. However, its practical application still suffers from poor cyclability and low initial and later-cycle coulombic efficiency (CE), caused by the unstable solid electrolyte interphase (SEI) and irreversible lithiation of the surface oxide layer. Herein, a bifunctional fluorine (F)-free electrolyte was designed for the mSi anode to stabilize the interphase and improve the CE. A combined analysis revealed that this electrolyte can chemically pre-lithiate the native oxide layer by the reductive LiBH4 , and relieve SEI formation and accumulation to preserve the internal conductive network. The significance of this F-free electrolyte brings unprecedented F-free interphase that also enables the high-performance mSi electrode (80 wt % mSi), including high specific capacity of 2900 mAh/g, high initial CE of 94.7 % and excellent cyclability capacity retention of 94.3 % after 100 cycles at 0.2 C. This work confirms the feasibility of F-free interphase, thus opening up a new avenue toward cost-advantaged and environmentally friendly electrolytes for more emerging battery systems.

NbO2 a Highly Stable, Ultrafast Anode Material for Li- and Na-Ion Batteries

Anode materials with fast charging capabilities and stability are critical for realizing next-generation Li-ion batteries (LIBs) and Na-ion batteries (SIBs). The present work employs a simple synthetic strategy to obtain NbO2 and studies its applications as an anode for LIB and SIB. In the case of the LIB, it exhibited a specific capacity of 344 mAh g-1 at 100 mA g-1. It also demonstrated remarkable stability over 1000 cycles, with 92% capacity retention. Additionally, it showed a unique fast charging capability, which takes 30 s to reach a specific capacity of 83 mAh g-1. For the SIB, NbO2 exhibited a specific capacity of 244 mAh g-1 at 50 mA g-1 and showed 70% capacity retention after 500 cycles. Furthermore, detailed density functional theory reveals that various factors like bulk and surface charging processes, lower ion diffusion energy barriers, and superior electronic conductivity of NbO2 are responsible for the observed battery performances.

A Uniform Self-Reinforced Organic/Inorganic Hybrid SEI Chelation Strategy on Microscale Silicon Surfaces for Stable-Cycling Anodes in Lithium-Ion Batteries

A promising anode material for Li-ion batteries, silicon (Si) suffers from volume expansion-induced pulverization and solid electrolyte interface (SEI) instability. Microscale Si with high tap density and high initial Coulombic efficiency (ICE) has become a more anticipated choice, but it will exacerbate the above issues. In this work, the polymer polyhedral oligomeric silsesquioxane-lithium bis (allylmalonato) borate (PSLB) is constructed by in situ chelation on microscale Si surfaces via click chemistry. This polymerized nanolayer has an "organic/inorganic hybrid flexible cross-linking" structure that can accommodate the volume change of Si. Under the stable framework formed by PSLB, a large number of oxide anions on the chain segment preferentially adsorb LiPF6 and further induce the integration of inorganic-rich, dense SEI, which improves the mechanical stability of SEI and provides accelerated kinetics for Li+ transfer. Therefore, the Si4@PSLB anode exhibits significantly enhanced long-cycle performance. After 300 cycles at 1 A g-1 , it can still provide a specific capacity of 1083 mAh g-1 . Cathode-coupled with LiNi0.9 Co0.05 Mn0.05 O2 (NCM90) in the full cell retains 80.8% of its capacity after 150 cycles at 0.5 C.

High-performance Si@C anode for lithium-ion batteries enabled by a novel structuring strategy

Si anode has drawn growing attention because of its features of large specific capacity, low electrochemical potential, and high natural abundance. However, it suffers from severe electrochemical irreversibility due to its large volume change during cycling. In spite of the achievement of improved electrochemical performance after compositing with carbon materials, most of the reported Si/C composite anodes lack a simple preparation process. To obtain a promising Si-based anode material, both simple preparation process and improved performance are necessary. Herein, inspired by the structure of shock proof foam, a novel structure of Si-based composite (Si@FeNO@P), consisting of Si nanoparticles embedded within a highly graphitized Fe3C/Fe3O4 hybrid nanoparticle-interspersed foam-like porous carbon matrix, has been constructed using a simple method, consisting of simple mixing, drying, and carbonization processes. Thus, the well-designed composite structure effectively mitigates issues resulting from volumetric change of the Si during cycle and hence improves its performance significantly. The research results confirm outstanding performance of the Si@FeNO@P anode in the aspects of cycle durability, specific capacity, and rate capability, with 1116.1 (250th cycle), 858.1 (500th cycle), and 503.1 (500th cycle) mA h g-1 at 100, 1000, and 5000 mA g-1, respectively. By comparing the performance and structure of Si@FeNO@P with other control samples, it was substantiated that the outstanding performances of the Si@FeNO@P anode depend on the synergistic effects of the well-designed unique carbon matrix, conductive Fe3C, and Fe3O4-in situ derived metallic Fe nanoparticles during cycling. The outstanding electrochemical performance and simple preparation route make the Si@FeNO@P anode promising for lithium-ion battery applications. This work also gives useful insights into the development of high-performance Si-based anodes with simple practical methods.

Insights into the Effect of SiO Particle Size on the Electrochemical Performance between Half and Full Cells for Li-Ion Batteries

Silicon monoxide (SiO) has attracted growing attention as one of the most promising anodes for high-energy-density lithium-ion batteries (LIBs), benefiting from relatively low volume expansion and superior cycling performance compared to bare silicon (Si). However, the size of the SiO particle for commercial application remains uncertain. Besides, the materials and concepts developed on the laboratory level in half cells are quite different from what is necessary for practical operation in full cells. Herein, we investigate the electrochemical performance of SiO with different particle sizes between half cells and full cells. The SiO with larger particle size exhibits worse electrochemical performance in the half cell, whereas it demonstrates excellent cycling stability with a high capacity retention of 91.3% after 400 cycles in the full cell. The reasons for the differences in their electrochemical performance between half cells and full cells are further explored in detail. The SiO with larger particle size possessing superior electrochemical performance in full cells benefits from consuming less electrolyte and not being easier to aggregate. It indicates that the SiO with larger particle size is recommended for commercial application and part of the information provided from half cells may not be advocated to predict the cycling performances of the anode materials. The analysis based on the electrochemical performance of the SiO between half cells and full cells gives fundamental insight into further Si-based anode research.

Regulating the Solvation Structure of Li+ Enables Chemical Prelithiation of Silicon-Based Anodes Toward High-Energy Lithium-Ion Batteries

The solvation structure of Li+ in chemical prelithiation reagent plays a key role in improving the low initial Coulombic efficiency (ICE) and poor cycle performance of silicon-based materials. Nevertheless, the chemical prelithiation agent is difficult to dope active Li+ in silicon-based anodes because of their low working voltage and sluggish Li+ diffusion rate. By selecting the lithium-arene complex reagent with 4-methylbiphenyl as an anion ligand and 2-methyltetrahydrofuran as a solvent, the as-prepared micro-sized SiO/C anode can achieve an ICE of nearly 100%. Interestingly, the best prelithium efficiency does not correspond to the lowest redox half-potential (E1/2), and the prelithiation efficiency is determined by the specific influencing factors (E1/2, Li+ concentration, desolvation energy, and ion diffusion path). In addition, molecular dynamics simulations demonstrate that the ideal prelithiation efficiency can be achieved by choosing appropriate anion ligand and solvent to regulate the solvation structure of Li+. Furthermore, the positive effect of prelithiation on cycle performance has been verified by using an in-situ electrochemical dilatometry and solid electrolyte interphase film characterizations.

Design Hybrid Porous Organic/Inorganic Polymers Containing Polyhedral Oligomeric Silsesquioxane/Pyrene/Anthracene Moieties as a High-Performance Electrode for Supercapacitor

We synthesized two hybrid organic-inorganic porous polymers (HPP) through the Heck reaction of 9,10 dibromoanthracene (A-Br₂) or 1,3,6,8-tetrabromopyrene (P-Br₄)/A-Br₂ as co-monomers with octavinylsilsesquioxane (OVS), in order to afford OVS-A HPP and OVS-P-A HPP, respectively. The chemical structures of these two hybrid porous polymers were validated through FTIR and solid-state ¹³C and ²⁹Si NMR spectroscopy. The thermal stability and porosity of these materials were measured by TGA and N₂ adsorption/desorption analyses, demonstrating that OVS-A HPP has higher thermal stability (T_d10: 579 °C) and surface area (433 m² g^-1) than OVS-P-A HPP (T_d10: 377 °C and 98 m² g^-1) due to its higher cross-linking density. Furthermore, the electrochemical analysis showed that OVS-P-A HPP has a higher specific capacitance (177 F g ^-1 at 0.5 A F g^-1) when compared to OVS-A HPP (120 F g ^-1 at 0.5 A F g^-1). The electron-rich phenyl rings and Faradaic reaction between the π-conjugated network and anthracene moiety may be attributed to their excellent electrochemical performance of OVS-P-A HPP.

Construction of Porous Organic/Inorganic Hybrid Polymers Based on Polyhedral Oligomeric Silsesquioxane for Energy Storage and Hydrogen Production from Water

In this study, we used effective and one-pot Heck coupling reactions under moderate reaction conditions to construct two new hybrid porous polymers (named OVS-P-TPA and OVS-P-F HPPs) with high yield, based on silsesquioxane cage nanoparticles through the reaction of octavinylsilsesquioxane (OVS) with different brominated pyrene (P-Br₄), triphenylamine (TPA-Br₃), and fluorene (F-Br₂) as co-monomer units. The successful syntheses of both OVS-HPPs were tested using various instruments, such as X-ray photoelectron (XPS), solid-state ¹³C NMR, and Fourier transform infrared spectroscopy (FTIR) analyses. All spectroscopic data confirmed the successful incorporation and linkage of P, TPA, and F units into the POSS cage in order to form porous OVS-HPP materials. In addition, the thermogravimetric analysis (TGA) and N₂ adsorption analyses revealed the thermal stabilities of OVS-P-F HPP (T_d10 = 444 °C; char yield: 79 wt%), with a significant specific surface area of 375 m² g^-1 and a large pore volume of 0.69 cm³ g^-1. According to electrochemical three-electrode performance, the OVS-P-F HPP precursor displayed superior capacitances of 292 F g^-1 with a capacity retention of 99.8% compared to OVS-P-TPA HPP material. Interestingly, the OVS-P-TPA HPP showed a promising HER value of 701.9 µmol g^-1 h^-1, which is more than 12 times higher than that of OVS-P-F HPP (56.6 µmol g^-1 h^-1), based on photocatalytic experimental results.

Assembly: A Key Enabler for the Construction of Superior Silicon-Based Anodes

Silicon (Si) is regarded as the most promising anode material for high-energy lithium-ion batteries (LIBs) due to its high theoretical capacity, and low working potential. However, the large volume variation during the continuous lithiation/delithiation processes easily leads to structural damage and serious side reactions. To overcome the resultant rapid specific capacity decay, the nanocrystallization and compound strategies are proposed to construct hierarchically assembled structures with different morphologies and functions, which develop novel energy storage devices at nano/micro scale. The introduction of assembly strategies in the preparation process of silicon-based materials can integrate the advantages of both nanoscale and microstructures, which significantly enhance the comprehensive performance of the prepared silicon-based assemblies. Unfortunately, the summary and understanding of assembly are still lacking. In this review, the understanding of assembly is deepened in terms of driving forces, methods, influencing factors and advantages. The recent research progress of silicon-based assembled anodes and the mechanism of the functional advantages for assembled structures are reviewed from the aspects of spatial confinement, layered construction, fasciculate structure assembly, superparticles, and interconnected assembly strategies. Various feasible strategies for structural assembly and performance improvement are pointed out. Finally, the challenges and integrated improvement strategies for assembled silicon-based anodes are summarized.

Electrolyte Design Enabling Stable Solid Electrolyte Interface for High-Performance Silicon/Carbon Anodes

Silicon (Si)-based materials have been considered as one of the most promising anodes for the development of high-energy-density lithium-ion batteries (LIBs). However, poor interfacial stability and structural degradation are critical challenges for the successful application of Si-based anodes in LIBs. Herein, the use of a novel fluorinated carbonate (trifluoropropylene carbonate, TFPC) with high reduction potential and rapid film-forming ability as an electrolyte cosolvent is reported, which overcomes the deterioration of the electrode structure that hinders the battery quality. X-ray photoelectron spectroscopy combined with Fourier transform infrared spectroscopy technology investigated the composition and distribution of the solid electrolyte interface (SEI) layer formed on the Si/C anode. Notably, a stable SEI with an organic and inorganic bilayer structure was formed in this electrolyte design, and excellent mechanical properties and ionic conductivity were achieved. Moreover, the Li intercalation mechanism is elucidated by in situ Raman characterization. Benefited from this unique SEI, the Si/C-based batteries exhibit compelling cycling and rate performance. This work provides an in-depth understanding of the Li intercalation mechanism of the Si/C electrode, as well as a novel electrolyte, for high-performance LIBs.

Ball-Milled Silicon with Amorphous Al2O3/C Hybrid Coating Embedded in Graphene/Graphite Nanosheets with a Boosted Lithium Storage Capability

Electrochemical active silicon has attracted great attention as anodes for lithium-ion batteries owing to a high theoretical capacity of 4200 mA h g^-1. In this work, ball-milled silicon particles with submicron size were strategically modified with a hybrid coating of amorphous alumina and carbon, which simultaneously embedded in a porous framework of in situ exfoliated graphene/graphite nanosheets (GGN). The composite exhibits an enhanced electrochemical performance, including high cycling stability and superior rate capability. An initial discharge capacity of 1294 mA h g^-1 and a reversible charge capacity of 1044 mA h g^-1 at 0.2 A g^-1 can be achieved with a high initial Coulombic efficiency of up to ca. 81%. Additionally, the composite can remain 902 mA h g^-1 after 100 discharge/charge cycles, accounting for a high retention of about 86%. This silicon composite is a promising anode material for high performance lithium-ion batteries with a high energy density, and the facile one-pot fabrication route is low cost and scalable, with a great prospect for practical application.

Interface Engineering to Boost Thermal Safety of Microsized Silicon Anodes in Lithium-Ion Batteries

Battery safety is vital to the application of lithium-ion batteries (LIBs), especially for high energy density cells applied in electric vehicles. As an anode material with high theoretical capacity and natural abundance, Si has received extensive attention for LIBs. However, it suffers from severe electrode pulverization during cycling due to large volume changes and an unstable solid electrolyte interphase (SEI), resulting in accelerated capacity fading and even safety hazards. Therefore, safe and long-term cycling of Si-based anodes, especially under high-temperature cycling, is highly challenging for state-of-the-art high-energy LIBs. The thermal behavior of SEI is crucial for a high safety battery as the decomposition of SEI is the first step in thermal runaway. Here, highly reversible and thermotolerant microsized Si anodes for safe LIBs are demonstrated. Comprehensive electrochemical/mechanical/thermochemical behaviors of the SEI are systematically investigated. The rational design of robust SEI endows the Si-based cells with long-term durability at elevated temperatures and superior thermal safety. This work paves the way for designing industrial-scale, low-cost, microsized Si anodes with applications in next-generation LIBs with high energy densities and high safety.