Engineering Catalytic CoSe-ZnSe Heterojunctions Anchored on Graphene Aerogels for Bidirectional Sulfur Conversion Reactions

Enhancing Conversion Kinetics through Electron Density Dual-Regulation of Catalysts and Sulfur toward Room-/Subzero-Temperature Na-S Batteries

Room-temperature sodium-sulfur (RT Na/S) batteries have received increasing attention for the next generation of large-scale energy storage, yet they are hindered by the severe dissolution of polysulfides, sluggish redox kinetic, and incomplete conversion of sodium polysulfides (NaPSs). Herein, the study proposes a dual-modulating strategy of the electronic structure of electrocatalyst and sulfur to accelerate the conversion of NaPSs. The selenium-modulated ZnS nanocrystals with electron rearrangement in hierarchical structured spherical carbon (Se-ZnS/HSC) facilitate Na+ transport and catalyze the conversion between short-chain sulfur and Na2S. And the in situ introduced Se within S can enhance conductivity and form an S─Se bond, suppressing the "polysulfides shuttle". Accordingly, the S@Se-ZnS/HSC cathode exhibits a specific capacity of as high as 1302.5 mAh g-1 at 0.1 A g-1 and ultrahigh-rate capability (676.9 mAh g-1 at 5.0 A g-1). Even at -10 °C, this cathode still delivers a high reversible capacity of 401.2 mAh g-1 at 0.05 A g-1 and 94% of the original capacitance after 50 cycles. This work provides a novel design idea for high-performance Na/S batteries.

Toward robust lithium-sulfur batteries via advancing Li2S deposition

Lithium-sulfur batteries (LSBs) with two typical platforms during discharge are prone to the formation of soluble lithium polysulfides (LiPS), leading to a decrease in the cycling life of the battery. Under practical working conditions, the transformation of S8 into Li2S is cross-executed rather than a stepwise reaction, where the liquid LiPS to solid Li2S conversion can occur at a high state of charge (SOC) to maintain the current requirement. Therefore, advancing Li2S deposition can effectively reduce the accumulation of LiPSs and ultimately improve the reaction kinetics. Herein, a "butterfly material" GeS2-MoS2/rGO is used as a sulfur host. Rich catalytic heterointerfaces can be obtained via the abundant S-S bonds formed between GeS2 and MoS2. MoS2 (left wing) can enhance LiPS adsorption, while the lattice-matching nature of Fdd2 GeS2 (right wing) and Fm3̄m Li2S can induce multiple nucleation and regulate the 3D growth of Li2S. Li2S deposition can be advanced to occur at 80% SOC, thereby effectively inhibiting the accumulation of soluble LiPSs. Attributed to the synergistic effect of catalytic and lattice-matching properties, robust coin and pouch LSBs can be achieved.

Spontaneous Built-In Electric Field in C3N4-CoSe2 Modified Multifunctional Separator with Accelerating Sulfur Evolution Kinetics and Li Deposition for Lithium-Sulfur Batteries

The discovery of the heterostructures that is combining two materials with different properties has brought new opportunities for the development of lithium sulfur batteries (LSBs). Here, C3N4-CoSe2 composite is elaborately designed and used as a functional coating on the LSBs separator. The abundant chemisorption sites of C3N4-CoSe2 form chemical bonding with polysulfides, provides suitable adsorption energy for lithium polysulfides (LiPSs). More importantly, the spontaneously formed internal electric field accelerates the charge flow in the C3N4-CoSe2 interface, thus facilitating the transport of LiPSs and electrons and promoting the bidirectional conversion of sulfur. Meanwhile, the lithiophilic C3N4-CoSe2 sample with catalytic activity can effectively regulate the uniform distribution of lithium when Li+ penetrates the separator, avoiding the formation of lithium dendrites in the lithium (Li) metal anode. Therefore, LSBs based on C3N4-CoSe2 functionalized membranes exhibit a stable long cycle life at 1C (with capacity decay of 0.0819% per cycle) and a large areal capacity of 10.30 mAh cm-2 at 0.1C (sulfur load: 8.26 mg cm-2, lean electrolyte 5.4 µL mgs -1). Even under high-temperature conditions of 60 °C, a capacity retention rate of 81.8% after 100 cycles at 1 C current density is maintained.

Fundamentally Manipulating the Electronic Structure of Polar Bifunctional Catalysts for Lithium-Sulfur Batteries: Heterojunction Design versus Doping Engineering

Heterogeneous structures and doping strategies have been intensively used to manipulate the catalytic conversion of polysulfides to enhance reaction kinetics and suppress the shuttle effect in lithium-sulfur (Li-S) batteries. However, understanding how to select suitable strategies for engineering the electronic structure of polar catalysts is lacking. Here, a comparative investigation between heterogeneous structures and doping strategies is conducted to assess their impact on the modulation of the electronic structures and their effectiveness in catalyzing the conversion of polysulfides. These findings reveal that Co0.125Zn0.875Se, with metal-cation dopants, exhibits superior performance compared to CoSe2/ZnSe heterogeneous structures. The incorporation of low Co2+ dopants induces the subtle lattice strain in Co0.125Zn0.875Se, resulting in the increased exposure of active sites. As a result, Co0.125Zn0.875Se demonstrates enhanced electron accumulation on surface Se sites, improved charge carrier mobility, and optimized both p-band and d-band centers. The Li-S cells employing Co0.125Zn0.875Se catalyst demonstrate significantly improved capacity (1261.3 mAh g-1 at 0.5 C) and cycle stability (0.048% capacity delay rate within 1000 cycles at 2 C). This study provides valuable guidance for the modulation of the electronic structure of typical polar catalysts, serving as a design directive to tailor the catalytic activity of advanced Li-S catalysts.

Bidirectional enhancement of Li2S redox reaction by NiSe2/CoSe2-rGO heterostructured bi-functional catalysts

The high activity barriers of Li2S nucleation and deposition limit the redox reaction kinetics of lithium polysulfides (LiPSs), meanwhile, the significant shuttle effect of LiPSs hampers the advancement of Li-S batteries (LSBs). In this work, a NiSe2/CoSe2-rGO (NiSe2/CoSe2-G) sulfur host with bifunctional catalytic activity was prepared through a hard template method. Electrochemical experiment results confirm that the combination of NiSe2 and CoSe2 not only facilitates the bidirectional catalytic function during charge and discharge processes, but also increases the active sites toward LiPSs adsorption. Simultaneously, the highly conductive rGO network enhances the electronic conductivity of NiSe2/CoSe2-G/S and provides convenience for loading NiSe2/CoSe2 catalysts. Benefitting from the exceptional catalytic-adsorption capability of NiSe2/CoSe2 and the presence of rGO, the NiSe2/CoSe2-G/S electrode exhibits excellent electrochemical properties. At 1C, it demonstrates a low capacity attenuation of 0.087 % per cycle during 500 cycles. The electrode can maintain a discharge capacity of 927 mAh/g at a sulfur loading of 3.3 mg cm-2. The bidirectional catalytic activity of NiSe2/CoSe2-G offers a prospective approach to expedite the redox reactions of active S, meanwhile, this work also offers an ideal approach for designing efficient S hosts for LSBs.

Interfacial "Double-Terminal Binding Sites" Catalysts Synergistically Boosting the Electrocatalytic Li2S Redox for Durable Lithium-Sulfur Batteries

Catalytic conversion of polysulfides emerges as a promising approach to improve the kinetics and mitigate polysulfide shuttling in lithium-sulfur (Li-S) batteries, especially under conditions of high sulfur loading and lean electrolyte. Herein, we present a separator architecture that incorporates double-terminal binding (DTB) sites within a nitrogen-doped carbon framework, consisting of polar Co0.85Se and Co clusters (Co/Co0.85Se@NC), to enhance the durability of Li-S batteries. The uniformly dispersed clusters of polar Co0.85Se and Co offer abundant active sites for lithium polysulfides (LiPSs), enabling efficient LiPS conversion while also serving as anchors through a combination of chemical interactions. Density functional theory calculations, along with in situ Raman and X-ray diffraction characterizations, reveal that the DTB effect strengthens the binding energy to polysulfides and lowers the energy barriers of polysulfide redox reactions. Li-S batteries utilizing the Co/Co0.85Se@NC-modified separator demonstrate exceptional cycling stability (0.042% per cycle over 1000 cycles at 2 C) and rate capability (849 mAh g-1 at 3 C), as well as deliver an impressive areal capacity of 10.0 mAh cm-2 even in challenging conditions with a high sulfur loading (10.7 mg cm-2) and lean electrolyte environments (5.8 μL mg-1). The DTB site strategy offers valuable insights into the development of high-performance Li-S batteries.

RuOx Quantum Dots Loaded on Graphdiyne for High-Performance Lithium-Sulfur Batteries

Here, a strategy to strengthen d-p orbital hybridization by fabricating π backbonding in the catalyst for efficient lithium polysulfides (LiPSs) conversion is reported. A special interface structure of RuOx quantum dots (QDs) anchored on graphdiyne (GDY) nanoboxes (RuOx QDs/GDY) is prepared to enable strong Ru-to-alkyne π backdonation, which effectively regulates the d-electron structures of Ru centers to promote the d-p orbital hybridization between the catalyst and LiPSs and significantly boosts the catalytic performance of RuOx QDs/GDY. The strong affinity with Li ions and fast Li-ion diffusion of RuOx QDs/GDY also enable ultrastable Li metal anodes. Thus, S@RuOx QDs/GDY cathodes exhibit excellent cycling performance under harsh conditions, and Li@RuOx QDs/GDY anodes show an ultralong cycling life over 8800 h without Li dendrite growth. Lithium-sulfur (Li-S) full cells with S@RuOx QDs/GDY cathodes and Li@RuOx QDs/GDY anodes can deliver an impressive areal capacity of 17.8 mA h cm-2 and good cycling stability under the practical conditions of low negative-to-positive electrode capacity (N/P) ratio (N/P = 1.4), lean electrolyte (E/S = 3 µL mg-1 ), and high S mass loading (15.4 mg cm-2 ).

Encapsulating Sulfur into a Gel-Derived Nitrogen-Doped Mesoporous and Microporous Carbon Sponge for High-Performance Lithium-Sulfur Batteries

The practical application of Li-S batteries (LSBs) has long been impeded by the inefficient utilization of sulfur and slow kinetics. Utilizing conductive carbonaceous frameworks as a host scaffold presents an efficient and cost-effective approach to enhance sulfur utilization for redox reactions in LSBs. However, the interaction of pure carbon materials with lithium polysulfide intermediates (LiPSs) is limited to weak van der Waals forces. Hence, the development of an economical method for synthesizing heteroatom-doped carbon materials for sulfur fixation is of paramount importance. In this study, we introduce a hierarchical porous nitrogen-doped carbon sponge (NPCS) with an exceptionally high BET surface area of 3182.2 m2 g-1, achieved through a facile template-assisted polymerization method. The incorporation of inorganic salts, free radical polymerization, and deuteric freeze-drying techniques facilitates the formation of hierarchical pores within the NPCS. After sulfur fixation, the resulting S/NPCS electrode demonstrates remarkable electrochemical performance in LSBs. Specifically, it achieves an 80% sulfur utilization rate, maintains a high reversible specific capacity of 400 mA h g-1 even after 600 cycles at a demanding current density of 5.0 A g-1, and exhibits superior rate capability. It is believed that this work will inspire the rational design of cost-effective carbon-based electrodes for high-performance LSBs.

A Review on Engineering Transition Metal Compound Catalysts to Accelerate the Redox Kinetics of Sulfur Cathodes for Lithium-Sulfur Batteries

Engineering transition metal compounds (TMCs) catalysts with excellent adsorption-catalytic ability has been one of the most effective strategies to accelerate the redox kinetics of sulfur cathodes. Herein, this review focuses on engineering TMCs catalysts by cation doping/anion doping/dual doping, bimetallic/bi-anionic TMCs, and TMCs-based heterostructure composites. It is obvious that introducing cations/anions to TMCs or constructing heterostructure can boost adsorption-catalytic capacity by regulating the electronic structure including energy band, d/p-band center, electron filling, and valence state. Moreover, the electronic structure of doped/dual-ionic TMCs are adjusted by inducing ions with different electronegativity, electron filling, and ion radius, resulting in electron redistribution, bonds reconstruction, induced vacancies due to the electronic interaction and changed crystal structure such as lattice spacing and lattice distortion. Different from the aforementioned two strategies, heterostructures are constructed by two types of TMCs with different Fermi energy levels, which causes built-in electric field and electrons transfer through the interface, and induces electron redistribution and arranged local atoms to regulate the electronic structure. Additionally, the lacking studies of the three strategies to comprehensively regulate electronic structure for improving catalytic performance are pointed out. It is believed that this review can guide the design of advanced TMCs catalysts for boosting redox of lithium sulfur batteries.

"Wane and wax" strategy: Enhanced evolution kinetics of liquid phase Li2S4 to Li2S via mutually embedded CNT sponge/Ni-porous carbon electrocatalysts

The lithium-sulfur battery (Li-S) has been considered a promising energy storage system, however, in the practical application of Li-S batteries, considerable challenges remain. One challenge is the low kinetics involved in the conversion of Li2S4 to Li2S. Here, we reveal that highly dispersed Ni nanoparticles play a unique role in the reduction of Li2S4. Ni-porous carbon (Ni-PC) decorated in situ on a free-standing carbon nanotube sponge (CNTS/Ni-PC) enriches the current response of liquid phase Li2S4 and Li2S2 around the cathode more than 8.1 and 5.7 times higher than that of the CNTS blank sample, respectively, greatly boosting the kinetics and decreasing the reaction overpotential of Li2S4 reduction (lower Tafel slope and larger current response). Thus, with the same total overpotential, more space is provided for the concentration difference overpotential, allowing the more soluble polysulfide intermediates farther away from the surface of the conductive materials to be reduced based on the "wane and wax" strategy, and significantly improving the sulfur utilization. Consequently, S@CNTS/Ni-PC delivers excellent rate performance (812.4 mAh·g-1 at 2C) and a remarkable areal capacity of 10.1 mAh·cm-2. This work provides a viable strategy for designing a target catalyst to enhance the conversion kinetics in the Li2S4 reduction process.

Stable Lithium-Sulfur Batteries Ensured by GeS2 and α-S8 Lattice Matching During the Charge Process

The charge process of lithium-sulfur batteries (LSBs) is a process in which molecular polarity decreases and the volume shrinks gradually, which is the process most likely to cause lithium polysulfides (LiPSs) loss and interfacial collapse. In this work, GeS2 is utilized, whose (111) lattice plane exactly matches with the (113) lattice of α-S8 , to solve these problems. GeS2 can regulate the interconversion-deposition behavior of S-species during the charge process. Soluble LiPSs can be spontaneously adsorbed on the GeS2 surface, then obtain electrons and eventually convert to α-S8 molecules. More importantly, the α-S8 molecules will crystallize uniformly along the (111) lattice plane of GeS2 to maintain a stable cathode-electrolyte interface. Therefore, outstanding charge/discharge LSBs are successfully accomplished.

Heterostructures Regulating Lithium Polysulfides for Advanced Lithium-Sulfur Batteries

Sluggish reaction kinetics and severe shuttling effect of lithium polysulfides seriously hinder the development of lithium-sulfur batteries. Heterostructures, due to unique properties, have congenital advantages that are difficult to be achieved by single-component materials in regulating lithium polysulfides by efficient catalysis and strong adsorption to solve the problems of poor reaction kinetics and serious shuttling effect of lithium-sulfur batteries. In this review, the principles of heterostructures expediting lithium polysulfides conversion and anchoring lithium polysulfides are detailedly analyzed, and the application of heterostructures as sulfur host, interlayer, and separator modifier to improve the performance of lithium-sulfur batteries is systematically reviewed. Finally, the problems that need to be solved in the future study and application of heterostructures in lithium-sulfur batteries are prospected. This review will provide a valuable reference for the development of heterostructures in advanced lithium-sulfur batteries.

Atomically Dispersed Aluminum Sites in Hexagonal Boron Nitride Nanofibers for Boosting Adsorptive Desulfurization Performance

The exploitation of highly efficient and cost-effective selective adsorbents for adsorptive desulfurization (ADS) remains a challenge. Fortunately, single-atom adsorbents (SAAs) characterized by maximized atom utilization and atomically dispersed adsorption sites have great potential to solve this problem as an emerging class of adsorption materials. Herein, aiming at improving the efficiency of ADS performance via the economical and feasible strategy, the desirable SAAs have been fabricated by uniformly anchoring aluminum (Al) atoms on hexagonal boron nitride nanofibers (BNNF) via an in situ pyrolysis method. Remarkably, Al-BN-1.0 exhibited a superior adsorption capacity of 46.1 mg S/g adsorbent for dibenzothiophene, with a 45% increase in adsorption capacity compared to the pristine BNNF. Additionally, it demonstrated excellent adsorption of other thiophene sulfides. Moreover, the ADS mechanisms have been investigated through special adsorption experiments combined with density functional theory (DFT) calculations. It was demonstrated that the superior ADS performance and selectivity of Al-BN-1.0 originate from the sulfur-aluminum (S-Al) and π-π interactions cooperating synergistically. This work would cast light on a novel fabrication strategy for the SAAs based on the two-dimensional material with a tunable metal site configurations and densities for varied selective adsorption and separation.

Insight into Accelerating Polysulfides Redox Kinetics by BN@MXene Heterostructure for Li-S Batteries

Sluggish redox kinetics and shuttle effect of polysulfides hinder the extensive application of the lithium-sulfur batteries (LSBs). Herein a functional heterostructure of boron nitride (BN) and MXene with an alternately layered structure (BN@MXene) is designed as separator interlayer. High efficiency Li+ transmission, uniform lithium deposition, strong adsorption, and efficient catalytic conversion activities of lithium polysulfides (LiPSs) realized by this heterostructure are confirmed by experiments and theoretical calculations. The alternately layered structure provides unblocked ion transmission channels and abundant active sites to accelerate the polysulfides redox kinetics with reduced energy barriers of oxidation and reduction reactions. As a result, the LSBs deliver an initial discharge capacity of up to 1273.9 mAh g-1 at 0.2 °C and a low decay of 0.058% per cycle in long-term cycling up to 700 cycles at 1 °C. This work provides an effective designing strategy to accelerate the polysulfides redox kinetics for advanced Li-S electrochemical system.

Furnishing Continuous Efficient Bidirectional Polysulfide Conversion for Long-Life and High-Loading Lithium-Sulfur Batteries via the Built-In Electric Field

Most catalysts cannot accelerate uninterrupted conversion of polysulfides, resulting in poor long-cycle and high-loading performance of lithium-sulfur (Li-S) batteries. Herein, rich p-n junction CoS2 /ZnS heterostructures embedded on N-doped carbon nanosheets are fabricated by ion-etching and vulcanization as a continuous and efficient bidirectional catalyst. The p-n junction built-in electric field in the CoS2 /ZnS heterostructure not only accelerates the transformation of lithium polysulfides (LiPSs), but also promotes the diffusion and decomposition for Li2 S the from CoS2 to ZnS avoiding the aggregation of lithium sulfide (Li2 S). Meanwhile, the heterostructure possesses a strong chemisorption ability to anchor LiPSs and superior affinity to induce homogeneous Li deposition. The assembled cell with a CoS2 /ZnS@PP separator delivers a cycling stability with a capacity decay of 0.058% per cycle at 1.0 C after 1000 cycles, and a decent areal capacity of 8.97 mA h cm-2 at an ultrahigh sulfur mass loading of 6 mg cm-2 . This work reveals that the catalyst continuously and efficiently converts polysulfides via abundant built-in electric fields to promote Li-S chemistry.

Boosting Lean Electrolyte Lithium-Sulfur Battery Performance with Transition Metals: A Comprehensive Review

Lithium-sulfur (Li-S) batteries have received widespread attention, and lean electrolyte Li-S batteries have attracted additional interest because of their higher energy densities. This review systematically analyzes the effect of the electrolyte-to-sulfur (E/S) ratios on battery energy density and the challenges for sulfur reduction reactions (SRR) under lean electrolyte conditions. Accordingly, we review the use of various polar transition metal sulfur hosts as corresponding solutions to facilitate SRR kinetics at low E/S ratios (< 10 µL mg-1), and the strengths and limitations of different transition metal compounds are presented and discussed from a fundamental perspective. Subsequently, three promising strategies for sulfur hosts that act as anchors and catalysts are proposed to boost lean electrolyte Li-S battery performance. Finally, an outlook is provided to guide future research on high energy density Li-S batteries.

Towards Practical Application of Li-S Battery with High Sulfur Loading and Lean Electrolyte: Will Carbon-Based Hosts Win This Race?

As the need for high-energy-density batteries continues to grow, lithium-sulfur (Li-S) batteries have become a highly promising next-generation energy solution due to their low cost and exceptional energy density compared to commercially available Li-ion batteries. Research into carbon-based sulfur hosts for Li-S batteries has been ongoing for over two decades, leading to a significant number of publications and patents. However, the commercialization of Li-S batteries has yet to be realized. This can be attributed, in part, to the instability of the Li metal anode. However, even when considering just the cathode side, there is still no consensus on whether carbon-based hosts will prove to be the best sulfur hosts for the industrialization of Li-S batteries. Recently, there has been controversy surrounding the use of carbon-based materials as the ideal sulfur hosts for practical applications of Li-S batteries under high sulfur loading and lean electrolyte conditions. To address this question, it is important to review the results of research into carbon-based hosts, assess their strengths and weaknesses, and provide a clear perspective. This review systematically evaluates the merits and mechanisms of various strategies for developing carbon-based host materials for high sulfur loading and lean electrolyte conditions. The review covers structural design and functional optimization strategies in detail, providing a comprehensive understanding of the development of sulfur hosts. The review also describes the use of efficient machine learning methods for investigating Li-S batteries. Finally, the outlook section lists and discusses current trends, challenges, and uncertainties surrounding carbon-based hosts, and concludes by presenting our standpoint and perspective on the subject.

Cobalt-molybdenum-selenide nanoflowers for bifunctional visible light photocatalysis

The renewability and zero carbon emissions of hydrogen make it a promising clean energy resource to meet future energy demands. Owing to its benefits, photocatalytic water-splitting has been extensively investigated for hydrogen production. However, the low efficiency poses a serious challenge to its implementation. Herein, we attempted to synthesize bimetallic transition metal selenides, namely Co/Mo/Se (CMS) photocatalysts, with varying atomic compositions (CMSa, CMSb, and CMSc) and investigated their photocatalytic water splitting efficiencies. The observed hydrogen evolution rates were as follows: 134.88 μmol g^-1 min^-1 for CoSe₂, 145.11 μmol g^-1 min^-1 for MoSe₂, 167.31 μmol g^-1 min^-1 for CMSa, 195.11 μmol g^-1 min^-1 for CMSb, and 203.68 μmol g^-1 min^-1 for CMSc. Hence, we deemed CMSc to be the most potent photocatalytic alternative among the compounds. CMSc was also tested for its efficiency towards degradation of triclosan (TCN), and results substantiated that CMSc succeeded degrading 98% TCN while CMSa and b were able to degrade 80 and 90% TCN respectively-the attained efficiency being exponentially higher than CoSe₂ and MoSe₂ taken for comparative analysis in addition to complete degradation of the pollutants leaving no harmful intermediaries during the process. Thus, CMSc shall be identified as a highly potential photocatalyst with respect to both environmental and energy applications.

Preparation and characterization of highly conductive lignin aerogel based on tunicate nanocellulose framework

The highly conductive and elastic three-dimensional mesh porous material is an ideal platform for the fabrication of high electrical conductivity conductive aerogels. Herein, a multifunctional aerogel that is lightweight, highly conductive and stable sensing properties is reported. Tunicate nanocellulose (TCNCs) with a high aspect ratio, high Young's modulus, high crystallinity, good biocompatibility and biodegradability was used as the basic skeleton to prepare aerogel by freeze-drying technique. Alkali lignin (AL) was used as the raw material, polyethylene glycol diglycidyl ether (PEGDGE) was used as the cross-linking agent, and polyaniline (PANI) was used as the conductive polymer. Preparation of aerogels by freeze-drying technique, in situ synthesis of PANI, and construction of highly conductive aerogel from lignin/TCNCs. The structure, morphology and crystallinity of the aerogel were characterized by FT-IR, SEM, and XRD. The results show that the aerogel has good conductivity (as high as 5.41 S/m) and excellent sensing performance. When the aerogel was assembled as a supercapacitor, the maximum specific capacitance can reach 772 mF/cm² at 1 mA/cm² current density, and maximum power and energy density can reach 59.4 μWh/cm² and 3600 μW/cm², respectively. It is expected the aerogel can be applied in the field of wearable devices and electronic skin.

Manipulating Li2 S Redox Kinetics and Lithium Dendrites by Core-Shell Catalysts under High Sulfur Loading and Lean-Electrolyte Conditions

For practical lithium-sulfur batteries (LSBs), the high sulfur loading and lean-electrolyte are necessary conditions to achieve the high energy density. However, such extreme conditions will cause serious battery performance fading, due to the uncontrolled deposition of Li₂ S and lithium dendrite growth. Herein, the tiny Co nanoparticles embedded N-doped carbon@Co₉ S₈ core-shell material (CoNC@Co₉ S₈ NC) is designed to address these challenges. The Co₉ S₈ NC-shell effectively captures lithium polysulfides (LiPSs) and electrolyte, and suppresses the lithium dendrite growth. The CoNC-core not only improves electronic conductivity, but also promotes Li⁺ diffusion as well as accelerates Li₂ S deposition/decomposition. Consequently, the cell with CoNC@Co₉ S₈ NC modified separator delivers a high specific capacity of 700 mAh g^-1 with a low-capacity decay rate of 0.035% per cycle at 1.0 C after 750 cycles under a sulfur loading of 3.2 mg cm^-2 and a E/S ratio of 12 µL mg^-1 , and a high initial areal capacity of 9.6 mAh cm^-2 under a high sulfur loading of 8.8 mg cm^-2 and a low E/S ratio of 4.5 µL mg^-1 . Besides, the CoNC@Co₉ S₈ NC exhibits an ultralow overpotential fluctuation of 11 mV at a current density of 0.5 mA cm^-2 after 1000 h during a continuous Li plating/striping process.

Construction of Co3 O4 /ZnO Heterojunctions in Hollow N-Doped Carbon Nanocages as Microreactors for Lithium-Sulfur Full Batteries

Lithium-sulfur (Li-S) batteries are promising alternatives of conventional Li-ion batteries attributed to their remarkable energy densities and high sustainability. However, the practical applications of Li-S batteries are hindered by the shuttling effect of lithium polysulfides (LiPSs) on cathode and the Li dendrite formation on anode, which together leads to inferior rate capability and cycling stability. Here, an advanced N-doped carbon microreactors embedded with abundant Co₃ O₄ /ZnO heterojunctions (CZO/HNC) are designed as dual-functional hosts for synergistic optimization of both S cathode and Li metal anode. Electrochemical characterization and theoretical calculations confirm that CZO/HNC exhibits an optimized band structure that effectively facilitates ion diffusion and promotes bidirectional LiPSs conversion. In addition, the lithiophilic nitrogen dopants and Co3O4/ZnO sites together regulate dendrite-free Li deposition. The S@CZO/HNC cathode exhibits excellent cycling stability at 2 C with only 0.039% capacity fading per cycle over 1400 cycles, and the symmetrical Li@CZO/HNC cell enables stable Li plating/striping behavior for 400 h. Remarkably, Li-S full cell using CZO/HNC as both cathode and anode hosts shows an impressive cycle life of over 1000 cycles. This work provides an exemplification of designing high-performance heterojunctions for simultaneous protection of two electrodes, and will inspire the applications of practical Li-S batteries.

Ionic Liquid Meets MOF: A Facile Method to Optimize the Structure of CoSe2-NiSe2 Heterojunctions with N, P, and F Triple-Doped Carbon Using Ionic Liquid for Efficient Hydrogen Evolution and Flexible Supercapacitors

The rational design of catalysts' spatial structure is vitally important to boost catalytic performance by exposing the active sites and increasing specific surface area. Herein, the heteroatom doping and morphology of CoNi metal-organic frameworks(MOF) are modulated by controlling the volume of ionic liquid used in synthesis and generating CoSe₂ -NiSe₂ heterojunction structures wrapped by N, P, F tri-doped carbon(NPFC) after a selenisation process. Notably, the unique cubic porous structure of CoSe₂ -NiSe₂ /NPFC results in a specific surface five times that of the sheet-like hollow structure produced without ionic liquid. Moreover, the charge redistribution during heterojunction formation is verified in detail using synchrotron radiation. Density functional theory calculations reveal that the formation of heterojunctions and doping of heteroatoms successfully lower the ΔG_H* and ΔG_OH* values. Consequently, CoSe₂ -NiSe₂ /NPFC exhibits excellent activity for HER in both acidic and alkaline solutions. Meanwhile, CoSe₂ -NiSe₂ /NPFC as a cathode material exhibits excellent performance in a flexible solid-state supercapacitor, with a superior energy density of 55.7 Wh kg^-1 at an extremely high-power density of 15.9 kW kg^-1 . This material design provides new ideas for not only using ionic liquids to modulate the morphology of MOFs but also deriving heterojunctions and heteroatom-doped carbon from MOFs.

Transition Metal d-band Center Tuning by Interfacial Engineering to Accelerate Polysulfides Conversion for Robust Lithium-Sulfur Batteries

Although lithium-sulfur batteries (LSBs) promise high theoretical energy density and potential cost effectiveness, their applications are severely impeded by the shuttling and sluggish redox kinetics of lithium polysulfides (LiPSs). In this context, a Co₉ S₈ @MoS₂ heterostructure is sophisticatedly designed as an efficient catalytic host to boost the sulfur reduction reaction/evolution reaction (SRR/SER) kinetics and suppresses the LiPSs shuttling in LSBs. The results indicate that the electronic structure is manipulated in the Co₉ S₈ @MoS₂ heterostructure, where the built-in electric fields (BIEFs) within the heterointerfaces enable the sufficient adsorption sites to accelerate the ionic diffusion/charge transfer kinetics for LiPSs redox, thus enhancing the sulfur conversion. By tuning the electronic structure, the metal d-band of Co₉ S₈ @MoS₂ heterostructure plays an important role in adsorbing and catalyzing the conversion of LiPSs, thus promoting the reaction kinetics of the corresponding LSBs. This work unlocks the potential of heterostructures as promising catalysts to the design of high-energy and stabilized LSBs.

Kinetic Acceleration of Lithium Polysulfide Conversion via a Copper-Iridium Alloying Catalytic Strategy in Li-S Batteries

To solve the shuttle effect of soluble lithium polysulfides (LiPSs), a porous N-doped carbon-supported copper-iridium alloy catalyst composite (CuIr/NC) has been synthesized and served as a modified cathode sulfur host for lithium-sulfur batteries (LSBs). The metal-organic framework-derived calcined carbon frameworks build efficient conductive channels for fast ion/electron transport. Furthermore, alloying noble metals Ir with thiophilic metal Cu provides abundant active sites to effectively capture LiPSs and accelerate the catalytic conversion process, originating from modulating the surface electronic structure of the metal Cu by introducing Ir atoms to affect the 3d-orbital distribution. All of the above are strongly supported by a range of characterization studies and density functional theory calculations. Benefiting from the above advantages, the LSBs generally show satisfactory cycling performance. Apart from exhibiting a terrific initial specific capacity of 1288 mA h g^-1 at 0.2 C, they can also keep long-term cycling stability under a high current density up to 5 C together with a slow specific capacity decay ratio (0.033%) per cycle after 1000 cycles. In addition, it is worth mentioning that a high areal capacity (4.7 mA h cm^-2) with a low E/S ratio (6.2 μL mg^-1) could still be accomplished at higher sulfur loading (4.3 mg cm^-2).

Zinc iron selenide nanoflowers anchored g-C3N4 as advanced catalyst for photocatalytic water splitting and dye degradation

Hydrogen has been considered as a promising clean energy source owing to its renewability and zero carbon emission. Accordingly, photocatalytic water splitting has drawn much attention as a key green technology of producing hydrogen. However, it has remained as a great challenge due to the low production rate and expensive constituents of photocatalytic systems. Herein, we synthesised nanostructures consisting of transition metal selenide and g-C₃N₄ for photocatalytic water splitting reaction. They include ZnSe, FeSe₂, Zn/FeSe₂ and ZnFeSe₂ nanoflowers and a nanocomposite made of Zn/FeSe₂ and g-C₃N₄. Hydrogen evolution rates in the presence of ZnSe, FeSe₂, Zn/FeSe₂ and ZnFeSe₂ photocatalysts were measured as 60.03, 128.02, 155.11 and 83.59 μmolg^-1 min^-1, respectively. On the other hand, with the nanocomposite consisting of Zn/FeSe₂ and g-C₃N₄, the hydrogen and oxygen evolution rates were significantly enhanced up to 202.94 μmol g^-1min^-1 and 90.92 μmol g^-1min^-1, respectively. The nanocomposite was also examined as a photocatalyst for degradation of rhodamine B showing that it photodegrades the compound two times faster compared to pristine Zn/FeSe₂ nanoflowers without g-C₃N_4. Our study suggests the nanocomposite of Zn/FeSe₂ and g-C₃N₄ as a promising photocatalyst for energy and environmental applications.

Ionic-Liquid-Assisted Synthesis of FeSe-MnSe Heterointerfaces with Abundant Se Vacancies Embedded in N,B Co-Doped Hollow Carbon Microspheres for Accelerating the Sulfur Reduction Reaction

Currently, extensive research efforts are being devoted to suppressing the shuttle effect of polysulfides. The uncontrollable deposition of insulating Li₂ S onto the surface of sulfur host materials dramatically inhibits the continuous reduction of polysulfides in lithium-sulfur (Li-S) batteries. Herein, N,B co-doped hollow carbon microspheres embedded with dense FeSe-MnSe heterostructures and abundant Se vacancies (FeSe-MnSe/NBC) are rationally designed and synthesized via a facile hydrothermal reaction using ionic liquids as dopants. The introduction of abundant heterostructures subtly guides Li₂ S nucleation and deposition in 3D frameworks, thus avoiding the formation of the Li₂ S passivation layer and allowing for continuous Li⁺ diffusion and subsequent nucleation of Li₂ S. Owing to these beneficial features, Li-S batteries comprising an FeSe-MnSe/NBC electrode exhibit significantly improved performance, including a high initial capacity of 1334 mAh g^-1 at 0.2 C and ultralong cycle stability with a low capacity fading rate of 0.029% cycle^-1 over 1000 cycles at 1.0 C. Remarkably, the FeSe-MnSe/NBC pouch cell delivers a considerable areal capacity of 3.6 mAh cm^-2 at 0.1 C. This study provides valuable insight into heterostructures and Se vacancies for developing practical Li-S batteries.

Dynamic Intercalation-Conversion Site Supported Ultrathin 2D Mesoporous SnO2/SnSe2 Hybrid as Bifunctional Polysulfide Immobilizer and Lithium Regulator for Lithium-Sulfur Chemistry

The practical application of lithium-sulfur batteries is impeded by the polysulfide shuttling and interfacial instability of the metallic lithium anode. In this work, a twinborn ultrathin two-dimensional graphene-based mesoporous SnO₂/SnSe₂ hybrid (denoted as G-mSnO₂/SnSe₂) is constructed as a polysulfide immobilizer and lithium regulator for Li-S chemistry. The as-designed G-mSnO₂/SnSe₂ hybrid possesses high conductivity, strong chemical affinity (SnO₂), and a dynamic intercalation-conversion site (Li_xSnSe₂), inhibits shuttle behavior, provides rapid Li-intercalative transport kinetics, accelerates LiPS conversion, and decreases the decomposition energy barrier for Li₂S, which is evidenced by the ex situ XAS spectra, in situ Raman, in situ XRD, and DFT calculations. Moreover, the mesoporous G-mSnO₂/SnSe₂ with lithiophilic characteristics enables homogeneous Li-ion deposition and inhibits Li dendrite growth. Therefore, Li-S batteries with a G-mSnO₂/SnSe₂ separator achieve a favorable electrochemical performance, including high sulfur utilization (1544 mAh g^-1 at 0.2 C), high-rate capability (794 mAh g^-1 at 8 C), and long cycle life (extremely low attenuation rate of 0.0144% each cycle at 5 C over 2000 cycles). Encouragingly, a 1.6 g S/Ah-level pouch cell realizes a high energy density of up to 359 Wh kg^-1 under a lean E/S usage of 3.0 μL mg^-1. This work sheds light on the design roadmap for tackling S-cathode and Li-anode challenges simultaneously toward long-durability Li-S chemistry.

Research progress on ZnSe and ZnTe anodes for rechargeable batteries

Transition-metal chalcogenides (TMCs) with tunable direct bandgaps and interlayer spacing are attractive for energy-related applications. Semiconducting zinc chalcogenides, especially their selenides (ZnSe) and tellurides (ZnTe), with enhanced conductivity, high theoretical capacity, low operation voltage and abundance, have appeared on the horizon and receive increasing interest in terms of electrochemical energy storage and conversion. Despite the existing typical obstruction owing to the large volume change, relatively low electrical conductivity and sluggish ion diffusion kinetics into the bulk phase, several effective strategies such as compositing, doping, nanostructuring, and electrode/cell design have exhibited promising applications. We herein provide a timely and systematic overview of recent research and significant advances regarding ZnSe, ZnTe and their hybrids/composites, covering synthesis to electrode design and to applications, especially in advanced Li/Na/K-ion batteries, as well as the reaction mechanisms thereof. It is hoped that the overview will shed new light on the development of ZnSe and ZnTe for next-generation rechargeable batteries.

Crystal Surface Engineering Induced Active Hexagonal Co2 P-V2 O3 for Highly Stable Lithium-Sulfur Batteries

Purposeful control of the highly active crystal planes is an effective strategy to improve the nanocrystalline catalytic activity. Therefore, Co₂ P nanocrystals with high exposure of (211) lattice plane loaded at 2D hexagonal V₂ O₃ nanosheets (H-Co₂ P-V₂ O₃ ) are designed via the control of morphology. After optimization, this H-Co₂ P-V₂ O₃ boosts the redox kinetics of lithium polysulfides (LiPSs) in lithium-sulfur batteries (LSBs), which is due to the increase of the Co-active sites by exposing more (211) lattice planes of Co₂ P, and the high adsorption and catalysis characteristic of H-Co₂ P-V₂ O₃ for the conversion of LiPSs into LSBs. In the case of modification separator by H-Co₂ P-V₂ O₃ composite, the battery achieves an outstanding reversibility of 876.9 mAh g^-1 over 500 cycles at 1 C, a superior rate property of 611.5 mAh g^-1 at 8 C, and a long-term cycling performance with a low attenuation of 0.04% per cycle over 1000 cycles at 4 C for LSBs. Impressively, a remarkable areal capacity of 12.38 mAh cm^-2 is retained under the high sulfur loading of 14.5 mg cm^-2 after 100 cycles. It is believed that the crystal surface engineering provides guidance to further improve the electrochemical performance of the LSB field.

Mechanically Robust and Elastic Graphene/Aramid Nanofiber/Polyaniline Nanotube Aerogels for Pressure Sensors

The preparation of graphene-based aerogels with excellent mechanical strength, elasticity, and compressibility is still a challenge. Herein, we demonstrate a robust, elastic, and lightweight graphene/aramid nanofiber/polyaniline nanotube (rGO/ANF/PANIT) aerogel that is prepared by mixing graphene oxide (GO), ANF, and PANIT dispersions, followed by thermal treatment at 90 °C, freeze-drying, and a low-temperature annealing process. The PANIT bonds the graphene sheets tightly, benefitting the formation of composite gels. The ANF tightly interconnects the graphene sheets and further reinforces the composite network framework significantly, hence endowing rGO/ANF/PANIT composite aerogels with robust mechanical property. The prepared aerogels present a low density of ∼12 mg cm^-3, high conductivity, good resilience, and high compressibility. The rGO/ANF/PANIT aerogels as pressure sensors exhibit a high sensitivity of 1.73 kPa^-1, low detection limit (40 Pa), wide detection range, and excellent compressive cycle stability, highlighting the promising applications in pressure-sensitive electrical devices, including medical health detection, wearable electronics, and intelligent packaging fields.

Confined Co9S8 nanocrystals into N/S-Co-doped carbon nanofibers as a chainmail-like electrocatalyst for high-performance lithium-sulfur batteries with high sulfur loading

Accelerating phase transposition efficiency of lithium polysulfides (LiPSs) to L₂S and hampering the solution of LiPSs are the keys to stabilizing lithium-sulfur (Li-S) batteries. Hence, the sulfiphilic ultrafine Co₉S₈ nanoparticles embedded lithiophilic N, S co-doping carbon nanofibers (Co₉S₈/NSCNF) are prepared via the dual-template method, which are then used as sulfur host in Li-S batteries. Particularly, the double active sites (Co₉S₈ and N, S) in Co₉S₈/NSCNF are prone to form "Co-S", "Li-O" or "Li-N" bonds, and then simultaneously improving the chemisorption and interface transposition capability of LiPSs. In case of the S@ Co₉S₈/NSCNF composites with high sulfur loading of 89% are employed as cathode, the cell possesses optimized "sulfiphilicity" and "lithiophilicity", which achieves remarkable sulfur electrochemistry, including outstanding reversibility of 816.8mAhg^-1 over 500 cycles at 1.0C, excellent rate property of 742.2mAhg^-1at 5.0C, and long-term cycling with a low attenuation of 0.011% per cycle over 1800 cycles at 3.0C. Impressively, a remarkable areal capacity of 11.51mAhcm^-2 is retained under the sulfur loading of 15.3 mg cm^-2 for 50 cycles. This research will deepen the understanding of the complex LiPSs interface transposition procedure and provide new ideas for the design of new host materials.

Synergetic Anion Vacancies and Dense Heterointerfaces into Bimetal Chalcogenide Nanosheet Arrays for Boosting Electrocatalysis Sulfur Conversion

Vacancy and interface engineering are regarded as effective strategies to modulate the electronic structure and enhance the activity of metal chalcogenides. However, the practical application of metal chalcogenides in lithium-sulfur (Li-S) batteries is limited by their low conductivity, rapid decline in catalytic activity, and large volume variation during the discharging/charging process. Herein, bimetal sulfide (CoZn-S) nanosheet arrays with sulfur vacancies and dense heterointerfaces are proposed to accelerate sulfur conversion and improve the performance of Li-S batteries. Systematic investigations reveal that sulfur-vacancy and build-in interfacial field in CoZn-S facilitate the electron transfer and regulate the electronic structure. The well-designed 3D nanosheet array structures shorten the ion-transport pathway and inhibit the volume fluctuation of CoZn-S during the electrocatalysis process. Density functional theory studies confirm that the built-in interfacial field and sulfur vacancy can promote the thermodynamic formation and decomposition of Li₂ S, thus improving their intrinsic activity.