Electronic properties of single Prussian Blue Analog nanocrystals determined by conductive-AFM

We report a study of the electron transport (ET) properties at the nanoscale (conductive-AFM denoted as C-AFM hereafter) of individual Prussian Blue Analog (PBA) cubic nanocrystals (NCs) of CsCoIIIFeII, with a size between 15 and 50 nm deposited on HOPG. We demonstrate that these PBA NCs feature an almost size-independent electron injection barrier of 0.41 ± 0.02 eV and 0.27 ± 0.03 eV at the CsCoIIIFeII/HOPG and CsCoIIIFeII/C-AFM tip, respectively, and an intrinsic electron conductivity evolving from a large dispersion between ∼5 × 10-4 and 2 × 10-2 S cm-1 without a clear correlation with the nanocrystal size. The conductivity values measured on individual nanocrystals are up to fifty times higher than those reported on PBA films.

Out-of-equilibrium dynamics driven by photoinduced charge transfer in CsCoFe Prussian Blue Analogue nanocrystals

In this paper we study the out-of-equilibrium dynamics associated with photoinduced charge-transfer (CT) in cyanide-bridged Co-Fe Prussian blue analogue nanocrystals. In these coordination networks, the structural trapping of the photoinduced...

Magnetic Hysteresis in a Monolayer of Oriented 6 nm CsNiCr Prussian Blue Analogue Nanocrystals

Prussian blue analogue nanocrystals of the Cs^INi^II[Cr^III(CN)₆] cubic network with 6 nm size were assembled as a single monolayer on highly organized pyrolytic graphite (HOPG). X-ray magnetic circular dichroism (XMCD) studies, at the Ni and Cr L_2,3 edges, reveal the presence of an easy plane of magnetization evidenced by an opening of the magnetic hysteresis loop (coercive field of ≈200 Oe) when the magnetic field, B, is at 60° relative to the normal to the substrate. The angular dependence of the X-ray natural linear dichroism (XNLD) reveals both an orientation of the nanocrystals on the substrate and an anisotropy of the electronic cloud of the Ni^II and Cr^III coordination sphere species belonging to the nanocrystals' surface. Ligand field multiplet (LFM) calculations that reproduce the experimental data are consistent with an elongated tetragonal distortion of surface Ni^II coordination sphere responsible for the magnetic behavior of monolayer.

Magnetic Properties and Second Harmonic Generation of Noncentrosymmetric Cyanido-Bridged Ln(III)-W(V) Assemblies

One-dimensional zigzag cyanido-bridged coordination polymers have been prepared as a result of self-assembly of lanthanide(III) ions with octacyanidotungstate(V) anions in the presence of N,N-dimethylacetamide (dma). All compounds crystallized in noncentrosymmetric space group P2₁ with a molecular formula of [Ln^III(dma)₅][W^V(CN)₈] [Ln = Gd (1), Tb (2), Dy (3), Ho (4), Er (5), Tm (6), Yb (7), Lu (8), or Y (9)]. Magnetic studies revealed weak antiferromagnetic interactions through Ln^III-NC-W^V bridges and the formation of ferrimagnetically coupled chains at very low temperatures. Moreover, temperature dependencies of magnetic susceptibilities were fitted using the crystal field parameters for Ln(III) ions, determined by the ab initio calculations, yielding magnetic coupling constants in the range of -1 to -5 cm^-1. The wide optical transparency of 1-9 has been determined using solid state absorption spectroscopy. Samples exhibited second harmonic (SH) generation properties with SH susceptibilities ranging from 4.7 × 10^-12 to 9.4 × 10^-11 esu due to the presence of nonlinear optical susceptibility tensor elements (χ_ijk) χ_zxx, χ_zyy, χ_zzz, χ_zxy, χ_yyz, χ_yzx, χ_xyz, and χ_xzx, corresponding to space group P2₁. The determined values were also compared with the results of theoretical calculations and previous reports, indicating a potential relationship between the type of lanthanide ion and the SH intensity.

Epitaxial Nickel Ferrocyanide Stabilizes Jahn-Teller Distortions of Manganese Ferrocyanide for Sodium-Ion Batteries

Manganese-based Prussian Blue, Na_2-δ Mn[Fe(CN)₆ ] (MnPB), is a good candidate for sodium-ion battery cathode materials due to its high capacity. However, it suffers from severe capacity decay during battery cycling due to the destabilizing Jahn-Teller distortions it undergoes as Mn²⁺ is oxidized to Mn³⁺ . Herein, the structure is stabilized by a thin epitaxial surface layer of nickel-based Prussian Blue (Na_2-δ Ni[Fe(CN)₆ ]). The one-pot synthesis relies on a chelating agent with an unequal affinity for Mn²⁺ and Ni²⁺ ions, which prevents Ni²⁺ from reacting until the Mn²⁺ is consumed. This is a new and simpler synthesis of core-shell materials, which usually needs several steps. The material has an electrochemical capacity of 93 mA h g^-1 , of which it retains 96 % after 500 charge-discharge cycles (vs. 37 % for MnPB). Its rate capability is also remarkable: at 4 A g^-1 (ca. 55 C) it can reversibly store 70 mA h g^-1 , which is also reflected in its diffusion coefficient of ca. 10^-8  cm²  s^-1 . The epitaxial outer layer appears to exert an anisotropic strain on the inner layer, preventing the Jahn-Teller distortions it normally undergoes during de-sodiation.

Second harmonic generation on chiral cyanido-bridged FeII-NbIV spin-crossover complexes

Incorporating chiral organic ligands into cyanido-bridged FeII-NbIV assemblies synthesized chiral spin-crossover complexes, FeII2[NbIV(CN)8](L)8·6H2O (L = R-, S-, or rac-1-(3-pyridyl)ethanol: R-FeNb, S-FeNb, or rac-FeNb). Rietveld analyses based on a racemic complex of rac-FeNb indicate that the chiral complexes have a cubic crystal structure in the I213 space group with a three-dimensional cyanido-bridged FeII-NbIV coordination network. All the complexes exhibit spin crossover between the high-spin (HS) and the low-spin (LS) FeII states without thermal hysteresis. Chiral complexes of R-FeNb and S-FeNb show second harmonic generation (SHG) due to their non-centrosymmetric structure. The I213 space group provides second-order susceptibility tensor elements of χxyz, χyzx, and χzxy, which contribute to SHG. The temperature-dependent second harmonic light intensity change is due to spin crossover between FeIIHS and FeIILS.

Long-range electron transport in Prussian blue analog nanocrystals

We report electron transport measurements through nano-scale devices consisting of 1 to 3 Prussian blue analog (PBA) nanocrystals connected between two electrodes. We compare two types of cubic nanocrystals, CsCoIIIFeII (15 nm) and CsNiIICrIII (6 nm), deposited on highly oriented pyrolytic graphite and contacted by conducting-AFM. The measured currents show an exponential dependence with the length of the PBA nano-device (up to 45 nm), with low decay factors β, in the range 0.11-0.18 nm-1 and 0.25-0.34 nm-1 for the CsCoFe and the CsNiCr nanocrystals, respectively. From the theoretical analysis of the current-voltage curve for the nano-scale device made of a single nanoparticle, we deduce that the electron transport is mediated by the localized d bands at around 0.5 eV from the electrode Fermi energy in the two cases. By comparison with previously reported ab initio calculations, we tentatively identify the involved orbitals as the filled Fe(ii)-t2g d band (HOMO) for CsCoFe and the half-filled Ni(ii)-eg d band (SOMO) for CsNiCr. Conductance values measured for multi-nanoparticle nano-scale devices (2 and 3 nanocrystals between the electrodes) are consistent with a multi-step coherent tunneling in the off-resonance regime between adjacent PBAs, a simple model gives a strong coupling (around 0.1-0.25 eV) between the adjacent PBA nanocrystals, mediated by electrostatic interactions.

Extremely low-frequency phonon material and its temperature- and photo-induced switching effects

Atomic vibrations due to stretching or bending modes cause optical phonon modes in the solid phase. These optical phonon modes typically lie in the frequency range of 102 to 104 cm-1. How much can the frequency of optical phonon modes be lowered? Herein we show an extremely low-frequency optical phonon mode of 19 cm-1 (0.58 THz) in a Rb-intercalated two-dimensional cyanide-bridged Co-W bimetal assembly. This ultralow frequency is attributed to a millefeuille-like structure where Rb ions are very softly sandwiched between the two-dimensional metal-organic framework, and the Rb ions slowly vibrate between the layers. Furthermore, we demonstrate temperature-induced and photo-induced switching of this low-frequency phonon mode. Such an external-stimulation-controllable sub-terahertz (sub-THz) phonon crystal, which has not been reported before, should be useful in devices and absorbers for high-speed wireless communications such as beyond 5G or THz communication systems.

Determination of total antioxidant capacity of Cynara Scolymus L. (globe artichoke) by using novel nanoparticle-based ferricyanide/Prussian blue assay

A novel ferricyanide/Prussian blue (PB) assay for total antioxidant capacity (TAC) determination was developed exploiting the formation of PB nanoparticles in the presence of polyvinylpyrrolidone (PVP) as stabilizer. This improved method, named as "nanoparticle-based ferricyanide/Prussian blue assay (PBNP)", was applied to the TAC measurement of Cynara Scolymus L. (globe artichoke). The calibration results of the novel (PBNP) method were compared with those of a similar nanoparticle PB method performed in the absence of PVP, and of a sodium dodecyl sulfate-modified and acid-optimized ferricyanide reference assay. Compared to similar common Fe(III)-based TAC assays, much higher molar absorptivities, pointing out higher response to different kinds of antioxidants, were obtained with PBNP for all tested antioxidants, and lower LOD and LOQ values were achieved for thiols. As an additional advantage, methionine, not responding to other electron-transfer based TAC reagents, could be measured. PBNP could detect various antioxidants with one-two orders-of-magnitude lower LOD values than those of widely used TAC assays like CUPRAC and Folin-Ciocalteau well correlating with the proposed assay.

Ordered colloidal clusters constructed by nanocrystals with valence for efficient CO2 photoreduction

The ability to construct discrete colloidal clusters (CCs) as complex as molecular clusters is limited due to the lack of available colloidal building blocks and specific directional bonds. Here, we explore a strategy to organize anisotropic Prussian blue analog nanocrystals (NCs) toward CCs with open and highly ordered structures, experimentally realizing colloidal analogs to zeolitic clathrate structures. The directional interactions are derived from either crystallographic or morphological anisotropy of the NCs and achieved by the interplay of epitaxial growth, oriented attachment, and local packing. We attribute these interparticle interactions to enthalpic and entropic valences that imitate hybridized atomic orbitals of sp 3 d 2 octahedron and sp 3 d 3 f cube. Benefiting from the ordered multilevel porous structures, the obtained CCs exhibit greatly enhanced catalytic activity for CO2 photoreduction. Our work offers some fundamental insights into directional bonding among NCs and opens an avenue that promises access to unique CCs with unprecedented structures and applications.

Design of Bistable Gold@Spin-Crossover Core-Shell Nanoparticles Showing Large Electrical Responses for the Spin Switching

A simple chemical protocol to prepare core-shell gold@spin-crossover (Au@SCO) nanoparticles (NPs) based on the 1D spin-crossover [Fe(Htrz)₂ (trz)](BF₄ ) coordination polymer is reported. The synthesis relies on a two-step approach consisting of a partial surface ligand substitution of the citrate-stabilized Au NPs followed by the controlled growth of a very thin layer of the SCO polymer. As a result, colloidally stable core@shell spherical NPs with a Au core of ca. 12 nm and a thin SCO shell 4 nm thick, are obtained, exhibiting a narrow distribution in sizes. Differential scanning calorimetry proves that a cooperative spin transition in the range 340-360 K is maintained in these Au@SCO NPs, in full agreement with the values reported for pristine 4 nm SCO NPs. Temperature-dependent charge-transport measurements of an electrical device based on assemblies of these Au@SCO NPs also support this spin transition. Thus, a large change in conductance upon spin state switching, as compared with other memory devices based on the pristine SCO NPs, is detected. This results in a large improvement in the sensitivity of the device to the spin transition, with values for the ON/OFF ratio which are an order of magnitude better than the best ones obtained in previous SCO devices.

Electronic Communication in Luminescent Dicyanorhenate-Bridged Homotrinuclear Rhenium(I) Complexes

A series of cyano-bridged homotrinuclear Re(I) complexes with the general formula of {[Re]'[Re][Re]'}⁺ {[Re]' = -[Re^I(CO)₂(LL)(X)]; [Re] = -[(NC)Re^I(CO)₂(phen)(CN)]-; LL = diimine, diphosphine, or two carbonyl ligands; X = triphenylphosphine or carbonyl ligand} and the corresponding mononuclear complex analogues were synthesized. The structures of most of the trinuclear Re(I) complexes have been determined by X-ray crystallography. The relative orientations of peripheral to central Re(I) units in these structures vary considerably. The photophysical properties of these trinuclear Re(I) complexes have been examined. Except for the trinuclear Re(I) complex with Br₂phen ligand, all the other triads display orange to red photoluminescence derived from the ³MLCT [dπ(Re) → π*(phen)] origin of the central Re(I) unit, suggestive of efficient energy transfer between the peripheral chromophores and the central unit. In addition to the efficient energy transfer processes between the Re(I) chromophores in these trinuclear complexes, the ability of the [NC-Re-CN] bridging ligands for electronic coupling between the rhenium metal centers is evidenced by ca. 0.2-0.3 V separation of the two rhenium metal-based oxidation potentials of the chemically equivalent peripheral units.

Gold@Prussian blue analogue core-shell nanoheterostructures: their optical and magnetic properties

Au@Prussian-Blue Analogue (PBA) shell nanoheterostructures are multifunctional nano-objects combining optical properties (surface plasmon resonance) of the Au core and magnetic properties of the PBA shell. We report in this article a series of new Au core@PBA shell nano-objects with different PBA shells: Au@K/Co/[FeII(CN)6] (2) and Au@K/Ni/[CrIII(CN)6]:[FeII(CN)6] (3) single PBA shell, as well as Au@K/Ni/[FeII(CN)6]@K/Ni/[FeIII(CN)6] (4) double PBA shell and Au@K/Ni/[FeII(CN)6]@K/Ni/[FeIII(CN)6]@K/Ni/[CrIII(CN)6] (5) triple PBA shell systems. The position and intensity of the Au SPR band, as well as the magnetic behaviour of the nanoheterostructures, are strongly affected by the shell composition and its thickness.

Strain engineering of photo-induced phase transformations in Prussian blue analogue heterostructures

Heterostructures based on Prussian blue analogues (PBA) combining photo- and magneto-striction have shown a large potential for the development of light-induced magnetization switching. However, studies of the microscopic parameters that control the transfer of the mechanical stresses across the interface and their propagation in the magnetic material are still too scarce to efficiently improve the elastic coupling. Here, this coupling strength is tentatively controlled by strain engineering in heteroepitaxial PBA core-shell heterostructures involving the same Rb0.5Co[Fe(CN)6]0.8·zH2O photostrictive core and isostructural shells of similar thickness and variable mismatch with the core lattice. The shell deformation and the optical electron transfer at the origin of photostriction are monitored by combined in situ and real time synchrotron X-ray powder diffraction and X-ray absorption spectroscopy under visible light irradiation. These experiments show that rather large strains, up to +0.9%, are developed within the shell in response to the tensile stresses associated with the expansion of the core lattice upon illumination. The shell behavior is, however, complex, with contributions in dilatation, in compression or unchanged. We show that a tailored photo-response in terms of strain amplitude and kinetics with potential applications for a magnetic manipulation using light requires a trade-off between the quality of the interface (which needs a small lattice mismatch i.e. a small a-cubic parameter for the shell) and the shell rigidity (decreased for a large a-parameter). A shell with a high compressibility that is further increased by the presence of misfit dislocations will show a decrease in its mechanical retroaction on the photo-switching properties of the core particles.

Control of the Speed of a Light-Induced Spin Transition through Mesoscale Core-Shell Architecture

The rate of the light-induced spin transition in a coordination polymer network solid dramatically increases when included as the core in mesoscale core-shell particles. A series of photomagnetic coordination polymer core-shell heterostructures, based on the light-switchable Rb _aCo _b[Fe(CN)₆] _c· mH₂O (RbCoFe-PBA) as core with the isostructural K _jNi _k[Cr(CN)₆] _l· nH₂O (KNiCr-PBA) as shell, are studied using temperature-dependent powder X-ray diffraction and SQUID magnetometry. The core RbCoFe-PBA exhibits a charge transfer-induced spin transition (CTIST), which can be thermally and optically induced. When coupled to the shell, the rate of the optically induced transition from low spin to high spin increases. Isothermal relaxation from the optically induced high spin state of the core back to the low spin state and activation energies associated with the transition between these states were measured. The presence of a shell decreases the activation energy, which is associated with the elastic properties of the core. Numerical simulations using an electro-elastic model for the spin transition in core-shell particles supports the findings, demonstrating how coupling of the core to the shell changes the elastic properties of the system. The ability to tune the rate of optically induced magnetic and structural phase transitions through control of mesoscale architecture presents a new approach to the development of photoswitchable materials with tailored properties.

Spin Crossover Nanomaterials: From Fundamental Concepts to Devices

Nanoscale spin crossover materials capable of undergoing reversible switching between two electronic configurations with markedly different physical properties are excellent candidates for various technological applications. In particular, they can serve as active materials for storing and processing information in photonic, mechanical, electronic, and spintronic devices as well as for transducing different forms of energy in sensors and actuators. In this progress report, a brief overview on the current state-of-the-art of experimental and theoretical studies of nanomaterials displaying spin transition is presented. Based on these results, a detailed analysis and discussions in terms of finite size effects and other phenomena inherent to the reduced size scale are provided. Finally, recent research devices using spin crossover complexes are highlighted, emphasizing both challenges and prospects.

Prussian Blue Analogue Mesoframes for Enhanced Aqueous Sodium-ion Storage

Mesostructure engineering is a potential avenue towards the property control of coordination polymers in addition to the traditional structure design on an atomic/molecular scale. Mesoframes, as a class of mesostructures, have short diffusion pathways for guest species and thus can be an ideal platform for fast storage of guest ions. We report a synthesis of Prussian Blue analogue mesoframes by top-down etching of cubic crystals. Scanning and transmission electron microscopy revealed that the surfaces of the cubic crystals were selectively removed by HCl, leaving the corners, edges, and the cores connected together. The mesoframes were used as a host for the reversible insertion of sodium ions with the help of electrochemistry. The electrochemical intercalation/de-intercalation of Na+ ions in the mesoframes was highly reversible even at a high rate (166.7 C), suggesting that the mesoframes could be a promising cathode material for aqueous sodium ion batteries with excellent rate performance and cycling stability.

Synthesis of Coordination Polymer Nanoparticles using Self-Assembled Block Copolymers as Template

Nowadays there is a high demand in specialized functional materials, for example, for applications as sensors in biomedicine. For the realization of such applications, nanostructures and the integration in a composite matrix are indispensable. Coordination polymers and networks, for example, with spin crossover properties, are a highly promising family of switchable materials in which the switching process can be triggered by various external stimuli. An overview over different strategies for the synthesis of nanoparticles of such systems is given. A special focus is set on the use of block copolymer micelles as templates for the synthesis of nanocomposites. The block copolymer defines the final size and shape of the nanoparticle core. Additionally it allows a further functionalization of the obtained nanoparticles by variation of the polymer blocks and an easy deposition of the composite material on surfaces.

Oriented assembly of anisotropic nanoparticles into frame-like superstructures

It is fascinating but challenging for nanoscientists to organize nanoparticles (NPs) into ordered architectures just as it is for chemists to manipulate atoms and molecules to form functional molecules and supramolecules. We explore a strategy to assemble anisotropic NPs into open frame-like superstructures via oriented attachment (OA), experimentally realizing a nanoscale analog to the bonding behavior in M₈L₁₂-type supramolecular cubes. We highlight the role of NP shape in the OA-involved assembly for constructing predictable superstructures. In addition, the frame-like superstructures can retain their basic structure when undergoing postcrystallization of the building blocks as well as annealing for conversion toward functional electrocatalytic materials. Our work enables fundamental insights into directional "bonding" among NPs and adds to the growing body of knowledge for bottom-up assembly of anisotropic NPs into sophisticated functional materials.

Spatially controlled positioning of coordination polymer nanoparticles onto heterogeneous nanostructured surfaces

Prussian Blue Analog (PBA) nanoparticles were formed on a heterogeneous nanostructured surface made of an ordered nanoperforated titanium oxide thin film deposited on a gold layer. The study of the nanocomposite film by grazing-incidence wide angle X-ray scattering, infrared spectroscopy, scanning electron microscopy and atomic force microscopy shows that the PBA particles are precisely positioned within all the perforations of the oxide film over very large surface areas. Further investigation on the formation of the PBA particles demonstrates a decisive role of a heterogeneous nucleation of the coordination polymer driven by well-adjusted surfaces energies and reactant concentrations in the spatial positioning of the PBA particles. Thanks to the well-controlled positioning of the particles within the ordered nanoperforations, the latter were successfully used as nano crucibles for the local transformation of PBA into the corresponding metal alloy by heat treatment. The thin film heterostructure thus obtained, made of ferromagnetic islands isolated by diamagnetic walls, opens interesting perspectives for the design of magnetic storage devices.

Two-Color Three-State Luminescent Lanthanide Core-Shell Crystals

Luminescent core-shell crystals based on lanthanide tris-dipicolinate complexes were obtained from the successive growing of two different lanthanide complex layers. Selective or simultaneous emission of each part of the crystal can be achieved by a careful choice of the excitation wavelength.

Molecular tectonics: hierarchical organization of heterobimetallic coordination networks into heterotrimetallic core–shell crystals

Core–shell heterotrimetallic crystals are generated by 3D epitaxial growth using isostructural and almost isometric crystals based on an organometallic tecton and MX₂ complexes.

Prussian blue type nanoparticles for biomedical applications

Prussian blue type nanoparticles are exciting nano-objects that combine the advantages of molecule-based materials and nanochemistry. Here we provide a short overview focalizing on the recent advances of these nano-objects designed for biomedical applications and give an outlook on the future research orientations in this domain.

Core-shell nanoparticles: synthesis and applications in catalysis and electrocatalysis

Core-shell nanoparticles (CSNs) are a class of nanostructured materials that have recently received increased attention owing to their interesting properties and broad range of applications in catalysis, biology, materials chemistry and sensors. By rationally tuning the cores as well as the shells of such materials, a range of core-shell nanoparticles can be produced with tailorable properties that can play important roles in various catalytic processes and offer sustainable solutions to current energy problems. Various synthetic methods for preparing different classes of CSNs, including the Stöber method, solvothermal method, one-pot synthetic method involving surfactants, etc., are briefly mentioned here. The roles of various classes of CSNs are exemplified for both catalytic and electrocatalytic applications, including oxidation, reduction, coupling reactions, etc.

Enhancing the magnetic anisotropy of maghemite nanoparticles via the surface coordination of molecular complexes

Superparamagnetic nanoparticles are promising objects for data storage or medical applications. In the smallest--and more attractive--systems, the properties are governed by the magnetic anisotropy. Here we report a molecule-based synthetic strategy to enhance this anisotropy in sub-10-nm nanoparticles. It consists of the fabrication of composite materials where anisotropic molecular complexes are coordinated to the surface of the nanoparticles. Reacting 5 nm γ-Fe2O3 nanoparticles with the [Co(II)(TPMA)Cl2] complex (TPMA: tris(2-pyridylmethyl)amine) leads to the desired composite materials and the characterization of the functionalized nanoparticles evidences the successful coordination--without nanoparticle aggregation and without complex dissociation--of the molecular complexes to the nanoparticles surface. Magnetic measurements indicate the significant enhancement of the anisotropy in the final objects. Indeed, the functionalized nanoparticles show a threefold increase of the blocking temperature and a coercive field increased by one order of magnitude.

Strain tuning of ferroelectric polarization in hybrid organic inorganic perovskite compounds

Metal-organic frameworks (MOFs) are hybrid crystalline compounds comprised of an extended ordered network made up of organic molecules, organic linkers and metal cations. In particular, MOFs with the same topology as inorganic perovskites have been shown to possess interesting properties, e.g., coexistence of ferroelectric and magnetic ordering. Using first-principles density functional theory, we have investigated the effect of strain on the compounds C(NH2)3Cr(HCOO)3 and (CH3CH2NH3)Mn(HCOO)3. Here, we show that compressive strain can substantially increase the ferroelectric polarization by more than 300%, and we discuss the mechanism involved in the strain enhancement of polarization. Our study highlights the complex interplay between strain and organic cations' dipoles and put forward the possibility of tuning of ferroelectric polarization through appropriate thin film growing.

Hybrid spin-crossover nanostructures

This review reports on the recent progress in the synthesis, modelling and application of hybrid spin-crossover materials, including core-shell nanoparticles and multilayer thin films or nanopatterns. These systems combine, often in synergy, different physical properties (optical, magnetic, mechanical and electrical) of their constituents with the switching properties of spin-crossover complexes, providing access to materials with unprecedented capabilities.

²⁰¹Tl⁺-labelled Prussian blue nanoparticles as contrast agents for SPECT scintigraphy

Prussian blue (PB) and its analogues on the nanometric scale are exciting nano-objects that combine the advantages of molecular-based materials and nanochemistry. Herein, we demonstrate that ultra-small PB nanoparticles of 2-3 nm can be easily labelled with radioactive (201)Tl(+) to obtain new nanoprobes as radiotracers for 201-thallium-based imaging.