Stabilization of Formate Dehydrogenase in a Metal-Organic Framework for Bioelectrocatalytic Reduction of CO2

In Situ Metal-Organic Framework Growth in Serum Encapsulates and Depletes Abundant Proteins for Integrated Plasma Proteomics

Protein biomarkers in human serum provide critical insights into various physiological conditions and diseases, enabling early diagnosis, prognosis, and personalized treatment. However, detecting low-abundance protein biomarkers is challenging due to the presence of highly abundant proteins that make up ∼99% of the plasma proteome. Here, we report the use of in situ metal-organic framework (MOF) growth in serum to effectively deplete highly abundant serum proteins for integrated proteomic analysis. Through biomolecule-mediated nucleation of a zeolitic imidazolate framework (ZIF-8), abundant plasma proteins are selectively encapsulated within ZIF-8 and removed from serum via centrifugation, leaving a depleted protein fraction in the supernatant. Bottom-up proteomics analysis confirmed significant depletion of the topmost abundant proteins, many at depletion levels exceeding 95%. Such depletion enabled the identification of 277 total proteins in the supernatant (uncaptured) fraction in a single-shot analysis, including 54 proteins that were only identified after depletion, 12 drug targets, and many potential disease biomarkers. Top-down proteomics characterization of the captured and uncaptured protein fractions at the proteoform-level confirmed this method is not biased toward any specific proteoform of individual proteins. These results demonstrate that in situ MOF growth can selectively and effectively deplete high-abundance proteins from serum in a simple, low cost, one-pot synthesis to enable integrated top-down and bottom-up proteomic analysis of serum protein biomarkers.

Electrically Driven Biocatalysis for Sustainable CO2-to-Chemicals Transformation

The catalytic transformation of CO2 into value-added chemicals has become a critical strategy for mitigating environmental issues and generating economic benefits. Although substantial progress has been made in renewable electricity-driven CO2 conversion into C1/C2 products, the efficient synthesis of high-value, and long-chain compounds remains a significant challenge. Biosynthesis offers a feasible route for producing long-chain value-added products at mild conditions. Consequently, the integration of electrocatalysis with bioconversion has emerged as a promising approach for sustainable CO2 conversion. This short review outlines recent advances in the sustainable synthesis of long-chain compounds from CO2 via electrically driven biocatalysis, highlighting innovative coupling strategies that combine electrochemical and biochemical processes. Furthermore, the remaining challenges and prospects are tentatively discussed for further advancing CO2-based sustainable synthesis.

Unlocking Advanced Architectures of Single-Crystal Metal-Organic Frameworks

The synthesis of metal-organic frameworks (MOFs) with diverse geometries has captivated considerable interest due to their manifestation of novel and extraordinary properties. While much progress has been made in shaping regular polyhedral single-crystal MOFs, the creation of more complex, topologically intricate nanostructures remains a largely unexplored frontier. Here, we present a refined site-specific anisotropic assembly and etching co-mediation approach to fabricate a series of hierarchical MOF nanohybrids and single-crystal MOFs. This approach yields ZIF-8&mSiO2 nanohybrids with diverse topologies, alongside derived single-crystal MOF nanoparticles exhibiting intricate morphologies such as hexapods, nested nanocages, and octopods. Our method involves the selective growth of six mSiO2 nanoplates on the {100} facets of ZIF-8 nanocubes, forming the cubic-shaped ZIF-8&mSiO2 nanohybrids, with the concurrent etching of the {110} facets of initial ZIF-8 nanocubes. By fine-tuning this balance between the growth and etching, we achieved precise morphological control, transforming cubic nanohybrids into intricate hexapods nanohybrids. Additionally, secondary epitaxial growth of homo- or hetero-MOFs on these hybrids led to ZIF-8&mSiO2&MOF composites with six mSiO2 inlays. Finally, selective alkaline etching of the mSiO2 compartments result in single-crystal MOF nanoparticles with unprecedented and sophisticated morphologies, such as hexapods, nested nanocages, octopods. This work advances the field of MOF nanostructure design, opening new avenues for the development of sophisticated, multifunctional materials.

Closing the Loop in the Carbon Cycle: Enzymatic Reactions Housed in Metal-Organic Frameworks for CO2 Conversion to Methanol

The preparation of value-added chemicals from carbon dioxide (CO2) can act as a way of reducing the greenhouse gas from the atmosphere. Industrially significant C1 chemicals like methanol (CH3OH), formic acid (HCOOH), and formaldehyde (HCHO) can be formed from CO2. One sustainable way of achieving this is by connecting the reactions catalyzed by the enzymes formate dehydrogenase (FDH), formaldehyde dehydrogenase (FALDH), and alcohol dehydrogenase (ADH) into a single cascade reaction where CO2 is hydrogenated to CH3OH. For this to be adaptable for industrial use, the enzymes should be immobilized in materials that are extraordinarily protective of the enzymes, inexpensive, stable, and of ultra-large surface area. Metal-organic frameworks (MOFs) meet these criteria and are expected to usher in the much-awaited dispensation of industrial biocatalysis. Unfortunately, little is known about the molecular behaviour of MOF-immobilized FDH, FALDH, and ADH. It is also yet not known which MOFs are most promising for industrial enzyme-immobilization since the field of reticular chemistry is growing exponentially with millions of hypothetical and synthesized MOF structures reported at present. This review initially discusses the properties of the key enzymes required for CO2 hydrogenation to methanol including available cofactor regeneration strategies. Later, the characterization techniques of enzyme-MOF composites and the successes or lack thereof of enzyme-MOF-mediated CO2 conversion to CH3OH and intermediate products are discussed. We also discuss reported multi-enzyme-MOF systems for CO2 conversion cognizant of the fact that at present, these systems are the only chance of housing cascade-type biochemical reactions where strict substrate channelling and operational conditions are required. Finally, we delve into future perspectives.

Integrating Enzymes with Reticular Frameworks To Govern Biocatalysis

Integrating enzymes with reticular frameworks offers promising avenues for access to functionally tailorable biocatalysis. This Minireview explores recent advances in enzyme-reticular framework hybrid biocomposites, focusing on the utilization of porous reticular frameworks, including metal-organic frameworks, covalent-organic frameworks, and hydrogen-bonded organic frameworks, to regulate the reactivity of an enzyme encapsulated inside mainly by pore infiltration and in situ encapsulation strategies. We highlight how pore engineering and host-guest interfacial interactions within reticular frameworks create tailored microenvironments that substantially impact the mass transfer and enzyme conformation, leading to biocatalytic rate enhancement, or imparting enzymes with non-native biocatalytic functions, including substrate selectivity and new activity. Additionally, the feasibility of leveraging the photothermal effect of a framework to optimize the local reaction temperature and photoelectric effect to elicit diverse photoenzyme-coupled reactions is also summarized in detail, which can expand the functional repertoire of biocatalytic transformations under light irradiation. This Minireview underscores the potential of reticular frameworks as tunable and reliable platforms to govern biocatalysis, offering pathways for engineering sustainable, efficient, and selective biocatalytic reactors in pharmaceutical, environmental, and energy-related applications.

Recent Progress in Enzyme Immobilization to Metal-Organic Frameworks to Enhance the CO2 Conversion Efficiency

Climate change and the energy crisis, driven by excessive CO2 emissions, have emerged as pressing global challenges. The conversion of CO2 into high-value chemicals not only mitigates atmospheric CO2 levels but also optimizes carbon resource utilization. Enzyme-catalyzed carbon technology offers a green and efficient approach to CO2 conversion. However, free enzymes are prone to inactivation and denaturation under reaction conditions, which limit their practical applications. Metal-organic frameworks (MOFs) serve as effective carriers for enzyme immobilization, offering porous crystalline structures that enhance enzyme stability. Moreover, their high specific surface area facilitates strong gas adsorption, making enzyme@MOF composites particularly advantageous for CO2 catalytic conversion. In this paper, we review the synthesis technologies and the application of enzyme@MOFs in CO2 catalytic conversion. Furthermore, the strategies, including the enhancement of CO2 utilization, coenzyme regeneration efficiency, and substrate mass transfer efficiency, are also discussed to further improve the efficiency of enzyme@MOFs in CO2 conversion. The aim of this review is to present innovative ideas for future research and to highlight the potential applications of enzyme@MOFs in achieving efficient CO2 conversion.

Enhancing Biocatalysis: Metal-Organic Frameworks as Multifunctional Enzyme Hosts

Enzymes are highly efficient and selective catalysts that operate under mild conditions, making them invaluable for various chemical transformations. However, their limitations, such as instability and high cost, call for advancements in enzyme immobilization and the development of suitable host materials. Metal-organic frameworks (MOFs), characterized by high porosity, crystallinity, and tunability, are promising candidates for enzyme encapsulation. Among these, zirconium-based MOFs (Zr-MOFs) stand out due to their exceptional structural diversity and chemical stability. The physical and chemical properties of Zr-MOFs can be tuned and characterized with atomic precision, and their interactions with enzymes can be analyzed through a range of techniques spanning from chemistry and materials science to biochemistry. This tunable platform provides opportunities to systematically investigate the impact of encapsulation on the stability and activity of enzymes in order to develop design rules for enzyme hosts. In this Account, we discuss experimentally validated concepts for designing MOF hosts based on their structural properties and enzyme encapsulation mechanisms. We present methods to enhance enzyme catalytic performance through encapsulation and strategies for creating multifunctional enzyme@MOF systems via host modifications. We start by highlighting the importance of host structural design that maximizes substrate diffusion and enzyme availability, with particular focus on MOFs containing hierarchical mesoporous structures such as those in the csq topology. We then delve into the encapsulation process and host-guest interactions examined through techniques such as microscopy, calorimetry, and computational methods, which provide guidelines to fine-tune the local pore chemical environment to enhance enzyme stability and catalytic activity. Techniques found in biochemistry, such as isothermal titration calorimetry (ITC) and confocal laser scanning microscopy (CLSM), were developed to investigate enzyme encapsulation mechanisms, revealing high-entropy-driven host-guest affinity. Additionally, we discuss cases in which enzyme@MOF systems demonstrated enhanced catalytic activities and multifunctional capabilities. Encapsulated enzymes have demonstrated improved thermal and chemical stabilities compared to their free counterparts, maintaining activity under conditions that typically lead to denaturation. Additionally, the highly tunable nature of the MOF platforms allows them to support more complex systems such as tandem reactions, enabling applications in biophotocatalysis, bioelectrocatalysis, and targeted therapeutic protein delivery. The versatility of enzyme@MOFs promises extensive applications in both research and industrial processes across fields including biotechnology, pharmaceutical development, and environmental science. We provide an outlook for promising directions for enzyme@MOF research, with the aim of continuing innovation and exploration. We hope that this Account can benefit chemists, biologists, and material scientists toward designing efficient and adaptable next-generation biocatalytic composite materials.

All-in-One CO2 Capture and Transformation: Lessons from Formylmethanofuran Dehydrogenases

Carbon-one-unit (C1) feedstocks are generally used in the chemical synthesis of organic molecules, such as solvents, drugs, polymers, and fuels. Contrary to the dangerous and polluting carbon monoxide mostly coming from fossil fuels, formate and formamide are attractive alternative feedstocks for chemical synthesis. As these are currently mainly obtained from the oil industry, novel synthetic routes have been developed based on the transformation of the greenhouse gas CO2. Such developments are motivated by the urgent need for carbon chemical recycling, leading to a sustainable future. The inert nature of CO2 represents a challenge for chemists to activate and specifically convert the molecule through an affordable and efficient process. The chemical transformation could be inspired by biological CO2 activation, in which highly specialized enzymes perform atmospheric CO2 fixation through relatively abundant metal catalysts. In this Account, we describe and discuss the potential of one of the most efficient biological CO2-converting systems: the formylmethanofuran dehydrogenase (abbreviated as FMD).FMDs are multienzymatic complexes found in archaea that capture CO2 as a formyl group branched on the amine moiety of the methanofuran (MFR) cofactor. This overall reaction leading to formyl-MFR production does not require ATP hydrolysis as compared to the CO2-fixing microbes relying on the reductive Wood-Ljungdahl pathway, highlighting a different operative mode that saves cellular energy. FMD reaction represents the entry point in hydrogenotrophic methanogenesis (H2 and CO2 dependent or formate dependent) and operates in reverse in other methanogenic pathways and microbial metabolisms. Therefore, FMD is a key enzyme in the planetary carbon cycle. After decades of investigations, recent studies have provided a description of the FMD structure, reaction mechanism, and potential for the electroreduction of CO2, to which our laboratory has been actively contributing. FMD is an "all-in-one" enzyme catalyzing a redox-active transformation coupled to a redox-neutral transformation at two very different metal cofactors where new C-H and C-N bonds are made. First, the principle of the overall reaction consisting of an exergonic CO2 reduction coupled with an endergonic formate condensation on MFR is resumed. Then, this Account exposes the molecular details of the active sites and provides an overview of each catalytic mechanism. It also describes the natural versatility of electron-delivery modules fueling CO2 reduction and extends it to the possibilities of using artificial systems such as electrodes. A perspective concludes on how the mechanistic of FMD could be applied to produce CO2-based chemical intermediates to synthesize organic molecules. Indeed, through its biochemical properties, the enzyme opens opportunities for CO2 electroreduction to generate molecules such as formate and formamide derivatives, which are all intermediates for synthesizing organic compounds. Transferring the chemical knowledge acquired from these biological systems would provide coherent models that can lead to further development in the field of synthetic biology and bio-inspired synthetic chemistry to perform large-scale CO2 conversion into building blocks for chemical synthesis.

Unlocking of Hidden Mesopores for Enzyme Encapsulation by Dynamic Linkers in Stable Metal-Organic Frameworks

Mesoporous metal-organic frameworks (MOFs) are promising supports for the immobilization of enzymes, yet their applications are often limited by small pore apertures that constrain the size of encapsulated enzymes to below 5 nm. In this study, we introduced labile linkers (4,4',4''-(2,4,6-boroxintriyl)-tribenzoate, TBTB) with dynamic boroxine bonds into mesoporous PCN-333, resulting in PCN-333-TBTB with enhanced enzyme loading and protection capabilities. The selective breaking of B-O bonds creates defects in PCN-333, which effectively expands both window and cavity sizes, thereby unlocking hidden mesopores for enzyme encapsulation. Consequently, this strategy not only increases the adsorption kinetics of small enzymes (<5 nm) such as cytochrome c (Cyt C) and horseradish peroxidase (HRP), but also enables the immobilization of various large-sized enzymes (>5 nm), such as glycoenzymes. The glycoenzymes@PCN-333-TBTB platform was successfully applied to synthesize thirteen complex oligosaccharides and polysaccharides, demonstrating high activity and enhanced enzyme stability. The dynamic linker-mediated enzyme encapsulation strategy enables the immobilization of enzymes exceeding the inherent pore size of MOFs, thus broadening the scope of enzymatic catalytic reactions achievable with MOF materials.

Spatiotemporal Encapsulation of Tandem Enzymes in Hierarchical Metal-Organic Frameworks for Cofactor-Dependent Photoenzymatic CO2 Conversion

The photo-enzyme coupling system (PECS) holds immense potential in "green" biomanufacturing, encompassing the realms of pharmaceuticals, fuels, and carbon sequestration. Nevertheless, the intricate nature of enzymes' structures significantly impedes the seamless integration of multiple enzymes in a precise, tandem fashion, with exact control over their distribution, posing a formidable challenge. Herein, it has devised a mesoporous csq-type metal organic framework (Zr-MOF) from meso-tetrakis-(4-((phenyl)ethynyl)benzoate)porphyrin (Por-PTP) and Zr6(μ3-O)4(μ3-OH)4(OH)4(H2O)4) nodes (Zr6 clusters), featuring intricate hierarchical hexagonal (5.8 nm) and triangular (2.9 nm) channels, enabling the simultaneous encapsulation of Formate dehydrogenase from Candida boidinii (CbFDH) and ferredoxin-NADP+ reductase (FNR) via a spatiotemporally controlled strategy for cofactor-dependent photoenzymatic carbon dioxide (CO2) conversion. Upon illumination, photoexcited electrons originating from the Zr-MOF frameworks migrate to the adjacent FNR for cofactor NADH regeneration, which is then harnessed by proximal CbFDH for CO2 fixation. Concurrently, the resulting holes are neutralized by AA for system recovery. The results demonstrated the confinement of tandem enzymes within MOF channels significantly enhanced the performance of multi-enzyme cascade pathways as well as augmenting the local NAD+/NADH, which leading to a further improvement in the efficiency of tandem biocatalytic formic acid generation (55 mm) from CO2. Crucially, the photo-enzyme-coupled factories exhibited remarkable stability alongside exceptional recyclability, attributed to the preservation of MOF skeletons.

Electro-Driven Multi-Enzymatic Cascade Conversion of CO2 to Ethylene Glycol in Nano-Reactor

Multi-enzymatic cascade reaction provides a new avenue for C─C coupling directly from CO2 under mild conditions. In this study, a new pathway with four enzymes including formate dehydrogenase (PaFDH), formaldehyde dehydrogenase (BmFADH), glycolaldehyde synthase (PpGALS), and alcohol dehydrogenase (GoADH) is developed for directly converting CO2 gas molecules to ethylene glycol (EG) in vitro. A rhodium-based NADH regeneration electrode is constructed to continuously provide the proton and electron of this multi-enzymatic cascade reaction. The prepared electrode can reach the Faradaic Efficiency (FE) of 82.9% at -0.6 V (vs. Ag/AgCl) and the NADH productivity of 0.737 mM h-1. Shortening the reaction path is crucial for multi-enzymatic cascade reactions. Here, a hydrogen-bonded organic framework (HOF) nano-reactor is successfully developed to immobilize four enzymes in one pot with a striking enzyme loading capacity (990 mg enzyme g-1 material). Through integrating and optimization of NADH electro-regeneration and enzymatic catalysis in one pot, 0.15 mM EG is achieved with an average conversion rate of 7.15 × 10-7 mmol CO2 min-1 mg-1 enzymes in 6 h. These results shed light on electro-driven multi-enzymatic cascade conversion of C─C coupling from CO2 in the nano-reactor.

Recyclable Enzymatic Hydrolysis with Metal-Organic Framework Stabilized Humicola insolens Cutinase (HiC) for Potential PET Upcycling

The degradation and recycling of plastics, such as poly(ethylene terephthalate) (PET), often require energy-intensive processes with significant waste generation. Moreover, prevalent methods primarily entail physical recycling, yielding subpar materials. In contrast, upcycling involves breaking down polymers into monomers, generating valuable chemicals and materials for alternative products. Enzyme-catalyzed depolymerization presents a promising approach to break down PET without the need for extreme conditions and unstable or toxic metal catalysts, which are typical of traditional recycling methods. However, the practical application of enzymes has been hindered by their high cost and low stability. In this study, we stabilized the enzyme Humicola insolens cutinase (HiC) by encapsulating it within a mesoporous zirconium-based metal-organic framework, NU-1000. HiC@NU-1000 exhibited a quantitative degradation of the PET surrogate, ethylene glycol dibenzoate (EGDB), with greater selectivity than native HiC in producing the fully hydrolyzed product benzoic acid in partial organic solvent. Additionally, the heterogeneous catalyst is also active toward the hydrolysis of PET and has demonstrated recyclability for at least four catalytic cycles. The HiC@NU-1000 model system represents a promising approach to stabilize industrially relevant enzymes under conditions involving elevated temperatures and organic solvents, offering a potential solution for relevant protein-related applications.

Formate-Mediated Electroenzymatic Synthesis via Biological Cofactor NADH

Synthetic biohybrid systems by coupling artificial system with nature's machinery may offer a disruptive solution to address the global energy crisis. We developed a versatile electroenzymatic pathway for the continuous synthesis of valuable chemicals, facilitated by formate-driven NADH regeneration. Utilizing a bismuth electrocatalyst, we achieved stable CO2 reduction to formate with approximately 90 % Faraday efficiency at a current density of 150 mA cm-2. The generated formate acts as a mediator to regenerate NADH, which is then coupled with immobilized redox enzymes-alcohol dehydrogenase (ADH), L-lactate dehydrogenase (LDH), and L-glutamate dehydrogenase (GDH)-to produce targeted chemicals at significant rates and exceptionally high turnover numbers (1.8×106 to 3.1×106). These achievements not only underscore the efficiency of the system but also its practical applicability in industrial settings. By leveraging in situ generated formate, this innovative approach demonstrates the potential of integrating electrocatalysis with enzymatic reactions for sustainable and efficient chemical production on a practical scale.

Decoupling Charge Carrier Electroreduction and Enzymatic CO2 Conversion to Formate Using a Dual-Cell Flow Reactor System

With an efficient atom economy, low activation energy, and valuable applications for fuel cells and hydrogen storage, formic acid (FA) is a useful fuel product to convert CO2 and reduce emissions. Although metal catalysts are typically used for this conversion, unwanted side reactions remain a concern, particularly when products are attempted to be recovered long-term. In this study, an enzymatic catalyst is used to enable the selective conversion of CO2 to FA, as a formate ion. A dual-cell flow reactor system is used to first reduce a charge mediator electrochemically (reduction cell), which then activates a catalyst to selectively convert CO2 to formate (production cell). This approach minimizes enzyme degradation by avoiding direct contact with increased voltages and improves the quantity of formate produced. The system produced 25 mM of formate and reached over 50% Coulombic efficiency. The larger volume of this dual-cell system increases the quantity of formate produced beyond that of a batch cell. Additional design configurations are employed, including a pH control pump to maintain catalyst activity and a packed bed reactor to improve contact of the charge carrier with the catalyst. Both configurations retained higher production and efficiency long-term (∼168 h). The results highlight the challenges of developing a system where many parameters play a role in optimizing performance. Nevertheless, the ability of the system to produce formate from CO2 demonstrates the potential to improve upon this configuration for a variety of electrochemical CO2 conversion applications.

Enzyme Immobilization using Covalent Organic Frameworks: From Synthetic Strategy to COFs Functional Role

Enzymes, a class of biocatalysts, exhibit remarkable catalytic efficiency, specificity, and selectivity, governing many reactions that are essential for various cascades within living cells. The immobilization of structurally flexible enzymes on appropriate supports holds significant importance in facilitating biomimetic transformations in extracellular environments. Covalent organic frameworks (COFs) have emerged as ideal candidates for enzyme immobilization due to high surface tunability, diverse chemical/structural designs, exceptional stability, and metal-free nature. Various immobilization techniques have been proposed to fabricate COF-enzyme biocomposites, offering significant enhancements in activity and reusability for COF-immobilized enzymes as well as new insights into developing advanced enzyme-based applications. In this review, we provide a comprehensive overview of state-of-the-art strategies for immobilizing enzymes within COFs by focusing on their applicability and versatility. These strategies are systematically summarized and compared by categorizing them into postsynthesis immobilization and in situ immobilization, where their respective strengths and limitations are thoroughly discussed. Combined with an overview of critical emerging applications, we further elucidate the multifaceted roles of COFs in enzyme immobilization and subsequent applications, highlighting the advanced biofunctionality achievable through COFs.

Enzyme-Immobilized Porous Crystals for Environmental Applications

Developing efficient technologies to eliminate or degrade contaminants is paramount for environmental protection. Biocatalytic decontamination offers distinct advantages in terms of selectivity and efficiency; however, it still remains challenging when applied in complex environmental matrices. The main challenge originates from the instability and difficult-to-separate attributes of fragile enzymes, which also results in issues of compromised activity, poor reusability, low cost-effectiveness, etc. One viable solution to harness biocatalysis in complex environments is known as enzyme immobilization, where a flexible enzyme is tightly fixed in a solid carrier. In the case where a reticular crystal is utilized as the support, it is feasible to engineer next-generation biohybrid catalysts functional in complicated environmental media. This can be interpreted by three aspects: (1) the highly crystalline skeleton can shield the immobilized enzyme against external stressors. (2) The porous network ensures the high accessibility of the interior enzyme for catalytic decontamination. And (3) the adjustable and unambiguous structure of the reticular framework favors in-depth understanding of the interfacial interaction between the framework and enzyme, which can in turn guide us in designing highly active biocomposites. This Review aims to introduce this emerging biocatalysis technology for environmental decontamination involving pollutant degradation and greenhouse gas (carbon dioxide) conversion, with emphasis on the enzyme immobilization protocols and diverse catalysis principles including single enzyme catalysis, catalysis involving enzyme cascades, and photoenzyme-coupled catalysis. Additionally, the remaining challenges and forward-looking directions in this field are discussed. We believe that this Review may offer a useful biocatalytic technology to contribute to environmental decontamination in a green and sustainable manner and will inspire more researchers at the intersection of the environment science, biochemistry, and materials science communities to co-solve environmental problems.

Boosted Enzyme Activity via Encapsulation within Metal-Organic Frameworks with Pores Matching Enzyme Size and Shape

A novel and versatile approach called "physical imprinting" is introduced to modulate enzyme conformation using mesoporous materials, addressing challenges in achieving improved enzyme activity and stability. Metal-organic frameworks with tailored mesopores, precisely matching enzyme size and shape, are synthesized. Remarkably, enzymes encapsulated within these customized mesopores exhibit over 1670% relative activity compared to free enzymes, maintaining outstanding efficiency even under harsh conditions such as heat, exposure to organic solvents, wide-ranging pH extremes from acidic to alkaline, and exposure to a digestion cocktail. After 18 consecutive cycles of use, the immobilized enzymes retain 80% of their initial activity. Additionally, the encapsulated enzymes exhibit a substantial increase in catalytic efficiency, with a 14.1-fold enhancement in kcat/KM compared to native enzymes. This enhancement is among the highest reported for immobilized enzymes. The improved enzyme activity and stability are corroborated by solid-state UV-vis, electron paramagnetic resonance, Fourier-transform infrared spectroscopy, and solid-state NMR spectroscopy. The findings not only offer valuable insights into the crucial role of size and shape complementarity within confined microenvironments but also establish a new pathway for developing solid carriers capable of enhancing enzyme activity and stability.

Boosting Enzyme Activity in Enzyme Metal-Organic Framework Composites

Enzymes, as highly efficient biocatalysts, excel in catalyzing diverse reactions with exceptional activity and selective properties under mild conditions. Nonetheless, their broad applications are hindered by their inherent fragility, including low thermal stability, limited pH tolerance, and sensitivity to organic solvents and denaturants. Encapsulating enzymes within metal-organic frameworks (MOFs) can protect them from denaturation in these harsh environments. However, this often leads to a compromised enzyme activity. In recent years, extensive research efforts have been dedicated to enhancing enzymatic activity within MOFs, leading to the development of new enzyme-MOF composites that not only preserve their catalytic potential but also outperform their free counterparts. This Review provides a comprehensive review on recent developments in enzyme-MOF composites with a specific emphasis on their enhanced enzymatic activity compared to free enzymes.

Biomolecules meet organic frameworks: from synthesis strategies to diverse applications

Biomolecules are essential in pharmaceuticals, biocatalysts, biomaterials, etc., but unfortunately they are extremely susceptible to extraneous conditions. When biomolecules meet porous organic frameworks, significantly improved thermal, chemical, and mechanical stabilities are not only acquired for raw biomolecules, but also molecule sieving, substrate enrichment, chirality property, and other functionalities are additionally introduced for application expansions. In addition, the intriguing synergistic effect stemming from elaborate and concerted interactions between biomolecules and frameworks can further enhance application performances. In this paper, the synthesis strategies of the so-called bio-organic frameworks (BOFs) in recent years are systematically reviewed and classified. Additionally, their broad applications in biomedicine, catalysis, separation, sensing, and imaging are introduced and discussed. Before ending, the current challenges and prospects in the future for this infancy-stage but significant research field are also provided. We hope that this review will offer a concise but comprehensive vision of designing and constructing multifunctional BOF materials as well as their full explorations in various fields.

Highly Enantioselective Catalysis by Enzyme Encapsulated in Metal Azolate Frameworks with Micelle-Controlled Pore Sizes

Encapsulating enzymes within metal-organic frameworks has enhanced their structural stability and interface tunability for catalysis. However, the small apertures of the frameworks restrict their effectiveness to small organic molecules. Herein, we present a green strategy directed by visible linker micelles for the aqueous synthesis of MAF-6 that enables enzymes for the catalytic asymmetric synthesis of chiral molecules. Due to the large pore aperture (7.6 Å), double the aperture size of benchmark ZIF-8 (3.4 Å), MAF-6 allows encapsulated enzyme BCL to access larger substrates and do so faster. Through the optimization of surfactants' effect during synthesis, BCL@MAF-6-SDS (SDS = sodium dodecyl sulfate) displayed a catalytic efficiency (Kcat/Km) that was 420 times greater than that of BCL@ZIF-8. This biocomposite efficiently catalyzed the synthesis of drug precursor molecules with 94-99% enantioselectivity and nearly quantitative yields. These findings represent a deeper understanding of de novo synthetic encapsulation of enzyme in MOFs, thereby unfolding the great potential of enzyme@MAF catalysts for asymmetric synthesis of organics and pharmaceuticals.

Bioinspired Polyoxo-titanium Cluster for Greatly Enhanced Solar-Driven CO2 Reduction

Developing artificial enzymes with excellent catalytic activities and uncovering the structural and chemical determinants remain a grand challenge. Discrete titanium-oxo clusters with well-defined coordination environments at the atomic level can mimic the pivotal catalytic center of natural enzymes and optimize the charge-transfer kinetics. Herein, we report the precise structural tailoring of a self-assembled tetrahedral Ti4Mn3-cluster for photocatalytic CO2 reduction and realize the selective evolution of CO over specific sites. Experiments and theoretical simulation demonstrate that the high catalytic performance of the Ti4Mn3-cluster should be related to the synergy between active Mn sites and the surrounding functional microenvironment. The reduced energy barrier of the CO2 photoreduction reaction and moderate adsorption strength of CO* are beneficial for the high selective evolution of CO. This work provides a molecular scale accurate structural model to give insight into artificial enzyme for CO2 photoreduction.

Opportunities and Challenges of Metal-Organic Framework Micro/Nano Reactors for Cascade Reactions

Building bridges among different types of catalysts to construct cascades is a highly worthwhile pursuit, such as chemo-, bio-, and chemo-bio cascade reactions. Cascade reactions can improve the reaction efficiency and selectivity while reducing steps of separation and purification, thereby promoting the development of "green chemistry". However, compatibility issues in cascade reactions pose significant constraints on the development of this field, particularly concerning the compatibility of diverse catalyst types, reaction conditions, and reaction rates. Metal-organic framework micro/nano reactors (MOF-MNRs) are porous crystalline materials formed by the self-assembly coordination of metal sites and organic ligands, possessing a periodic network structure. Due to the uniform pore size with the capability of controlling selective transfer of substances as well as protecting active substances and the organic-inorganic parts providing reactive microenvironment, MOF-MNRs have attracted significant attention in cascade reactions in recent years. In this Perspective, we first discuss how to address compatibility issues in cascade reactions using MOF-MNRs, including structural design and synthetic strategies. Then we summarize the research progress on MOF-MNRs in various cascade reactions. Finally, we analyze the challenges facing MOF-MNRs and potential breakthrough directions and opportunities for the future.

Nanobiocatalysts with inbuilt cofactor recycling for oxidoreductase catalysis in organic solvents

The major stumbling block in the implementation of oxidoreductase enzymes in continuous processes is their stark dependence on costly cofactors that are insoluble in organic solvents. We describe a chemical strategy that allows producing nanobiocatalysts, based on an oxidoreductase enzyme, that performs biocatalytic reactions in hydrophobic organic solvents without external cofactors. The chemical design relies on the use of a silica-based carrier nanoparticle, of which the porosity can be exploited to create an aqueous reservoir containing the cofactor. The nanoparticle core, possessing radial-centred pore channels, serves as a cofactor reservoir. It is further covered with a layer of reduced porosity. This layer serves as a support for the immobilisation of the selected enzyme yet allowing the diffusion of the cofactor from the nanoparticle core. The immobilised enzyme is, in turn, shielded by an organosilica layer of controlled thickness fully covering the enzyme. Such produced nanobiocatalysts are shown to catalyse the reduction of a series of relevant ketones into the corresponding secondary alcohols, also in a continuous flow fashion.

Renewable Hydrogen Production and Storage Via Enzymatic Interconversion of CO2 and Formate with Electrochemical Cofactor Regeneration

The urgent need to reduce CO2 emissions has motivated the development of CO2 capture and utilization technologies. An emerging application is CO2 transformation into storage chemicals for clean energy carriers. Formic acid (FA), a valuable product of CO2 reduction, is an excellent hydrogen carrier. CO2 conversion to FA, followed by H2 release from FA, are conventionally chemically catalyzed. Biocatalysts offer a highly specific and less energy-intensive alternative. CO2 conversion to formate is catalyzed by formate dehydrogenase (FDH), which usually requires a cofactor to function. Several FDHs have been incorporated in bioelectrochemical systems where formate is produced by the biocathode and the cofactor is electrochemically regenerated. H2 production from formate is also catalyzed by several microorganisms possessing either formate hydrogenlyase or hydrogen-dependent CO2 reductase complexes. Combination of these two processes can lead to a CO2 -recycling cycle for H2 production, storage, and release with potentially lower environmental impact than conventional methods.

Stable and Reusable Fe3 O4 /ZIF-8 Composite for Encapsulation of FDH Enzyme under Mild Conditions Applicable to CO2 Reduction

The enzymatic reduction of carbon dioxide presents limited applicability due to denaturation and the impossibility of biocatalyst recovery; disadvantages that can be minimized by its immobilization. Here, a recyclable bio-composed system was constructed by in-situ encapsulation under mild conditions using formate dehydrogenase in a ZIF-8 metalorganic framework (MOF) in the presence of magnetite. The partial dissolution of ZIF-8 in the enzyme's operation medium can be relatively inhibited if the concentration of magnetic support used exceeds 10 mg mL-1 . The bio-friendly environment for immobilization does not harm the integrity of the biocatalyst, and the production of formic acid is improved 3.4-fold compared to the free enzyme because the MOFs act as concentrators of the enzymatic cofactor. Furthermore, the bio-composed system retains 86 % of its activity after a long time of five cycles, thus indicating an excellent magnetic recovery and a good reusability.

Hierarchical covalent organic framework-foam for multi-enzyme tandem catalysis

Covalent organic frameworks (COFs) are ideal host matrices for biomolecule immobilization and biocatalysis due to their high porosity, various functionalities, and structural robustness. However, the porosity of COFs is limited to the micropore dimension, which restricts the immobilization of enzymes with large volumes and obstructs substrate flow during enzyme catalysis. A hierarchical 3D nanostructure possessing micro-, meso-, and macroporosity could be a beneficial host matrix for such enzyme catalysis. In this study, we employed an in situ CO2 gas effervescence technique to induce disordered macropores in the ordered 2D COF nanostructure, synthesizing hierarchical TpAzo COF-foam. The resulting TpAzo foam matrix facilitates the immobilization of multiple enzymes with higher immobilization efficiency (approximately 1.5 to 4-fold) than the COF. The immobilized cellulolytic enzymes, namely β-glucosidase (BGL), cellobiohydrolase (CBH), and endoglucanase (EG), remain active inside the TpAzo foam. The immobilized BGL exhibited activity in organic solvents and stability at room temperature (25 °C). The enzyme-immobilized TpAzo foam exhibited significant activity towards the hydrolysis of p-nitrophenyl-β-d-glucopyranoside (BGL@TpAzo-foam: Km and Vmax = 23.5 ± 3.5 mM and 497.7 ± 28.0 μM min-1) and carboxymethylcellulose (CBH@TpAzo-foam: Km and Vmax = 18.3 ± 4.0 mg mL-1 and 85.2 ± 9.6 μM min-1 and EG@TpAzo-foam: Km and Vmax = 13.2 ± 2.0 mg mL-1 and 102.2 ± 7.1 μM min-1). Subsequently, the multi-enzyme immobilized TpAzo foams were utilized to perform a one-pot tandem conversion from carboxymethylcellulose (CMC) to glucose with high recyclability (10 cycles). This work opens up the possibility of synthesizing enzymes immobilized in TpAzo foam for tandem catalysis.

Nanobiohybrids: Synthesis strategies and environmental applications from micropollutants sensing and removal to global warming mitigation

Micropollutants contamination and global warming are critical environmental issues that require urgent attention due to natural and anthropogenic activities posing serious threats to human health and ecosystems. However, traditional technologies (such as adsorption, precipitation, biodegradation, and membrane separation et al.) are facing challenges of low utilization efficiency of oxidants, poor selectivity, and complex in-situ monitoring operations. To address these technical bottlenecks, nanobiohybrids, synthesized by interfacing the nanomaterials and biosystems, have recently emerged as eco-friendly technologies. In this review, we summarize the synthesis approaches of nanobiohybrids and their utilization as emerging environmental technologies for addressing environmental problems. Studies demonstrate that enzymes, cells, and living plants can be integrated with a wide range of nanomaterials including reticular frameworks, semiconductor nanoparticles and single-walled carbon nanotubes. Moreover, nanobiohybrids demonstrate excellent performance for micropollutant removal, carbon dioxide conversion, and sensing of toxic metal ions and organic micropollutants. Therefore, nanobiohybrids are expected to be environmental friendly, efficient, and cost-effective techniques for addressing environmental micropollutants issues and mitigating global warming, benefiting both humans and ecosystems alike.

Bioinspired Framework Catalysts: From Enzyme Immobilization to Biomimetic Catalysis

Enzymatic catalysis has fueled considerable interest from chemists due to its high efficiency and selectivity. However, the structural complexity and vulnerability hamper the application potentials of enzymes. Driven by the practical demand for chemical conversion, there is a long-sought quest for bioinspired catalysts reproducing and even surpassing the functions of natural enzymes. As nanoporous materials with high surface areas and crystallinity, metal-organic frameworks (MOFs) represent an exquisite case of how natural enzymes and their active sites are integrated into porous solids, affording bioinspired heterogeneous catalysts with superior stability and customizable structures. In this review, we comprehensively summarize the advances of bioinspired MOFs for catalysis, discuss the design principle of various MOF-based catalysts, such as MOF-enzyme composites and MOFs embedded with active sites, and explore the utility of these catalysts in different reactions. The advantages of MOFs as enzyme mimetics are also highlighted, including confinement, templating effects, and functionality, in comparison with homogeneous supramolecular catalysts. A perspective is provided to discuss potential solutions addressing current challenges in MOF catalysis.

Bioelectrocatalysis with a palladium membrane reactor

Enzyme catalysis is used to generate approximately 50,000 tons of value-added chemical products per year. Nearly a quarter of this production requires a stoichiometric cofactor such as NAD⁺/NADH. Given that NADH is expensive, it would be beneficial to regenerate it in a way that does not interfere with the enzymatic reaction. Water electrolysis could provide the proton and electron equivalent necessary to electrocatalytically convert NAD⁺ to NADH. However, this form of electrocatalytic NADH regeneration is challenged by the formation of inactive NAD₂ dimers, the use of high overpotentials or mediators, and the long-term electrochemical instability of the enzyme during electrolysis. Here, we show a means of overcoming these challenges by using a bioelectrocatalytic palladium membrane reactor for electrochemical NADH regeneration from NAD⁺. This achievement is possible because the membrane reactor regenerates NADH through reaction of hydride with NAD⁺ in a compartment separated from the electrolysis compartment by a hydrogen-permselective Pd membrane. This separation of the enzymatic and electrolytic processes bypasses radical-induced NAD⁺ degradation and enables the operator to optimize conditions for the enzymatic reaction independent of the water electrolysis. This architecture, which mechanistic studies reveal utilizes hydride sourced from water, provides an opportunity for enzyme catalysis to be driven by clean electricity where the major waste product is oxygen gas.

Enzymatic Electrosynthesis of Glycine from CO2 and NH3

Enzymatic electrosynthesis has gained more and more interest as an emerging green synthesis platform, particularly for the fixation of CO₂ . However, the simultaneous utilization of CO₂ and a nitrogenous molecule for the enzymatic electrosynthesis of value-added products has never been reported. In this study, we constructed an in vitro multienzymatic cascade based on the reductive glycine pathway and demonstrated an enzymatic electrocatalytic system that allowed the simultaneous conversion of CO₂ and NH₃ as the sole carbon and nitrogen sources to synthesize glycine. Through effective coupling and the optimization of electrochemical cofactor regeneration and the multienzymatic cascade reaction, 0.81 mM glycine was yielded with a highest reaction rate of 8.69 mg L^-1  h^-1 and faradaic efficiency of 96.8 %. These results imply a promising alternative for enzymatic CO₂ electroreduction and expand its products to nitrogenous chemicals.

Electroenzymatic Reduction of Furfural to Furfuryl Alcohol by an Electron Mediator and Enzyme Orderly Assembled Biocathode

The electroenzymatic valorization of biomass derivatives into valuable biochemicals has a promising outlook. However, bottlenecks including poor electron transfer between the electrode surface and oxidoreductase, inefficient regeneration of cofactors, and high cost of enzymes and electron mediators hindered the realistic applications of the technique. Herein, to address the above technical barriers, a novel bio-electrocatalytic system that integrates the electrochemical NADH regeneration and enzymatic reaction was constructed, using an orderly assembled composite bioelectrode consisting of an outer immobilized enzyme layer and a sandwiched redox mediator rhodium complex layer. The as-prepared composite bioelectrode was further applied for the highly selective hydrogenation of furfural into furfural alcohol. Results indicated that the enzyme activity was significantly improved, while the furfural valorization was promoted by effective interfacial electron transition and co-factor regeneration on the composite bioelectrode. Considerable high furfural conversion (96.4%) can be achieved accompanied by a furfural alcohol selectivity of 90.0% at -1.2 V (vs Ag/AgCl). The novel composite bioelectrode also showed good stability and reusability. Up to 85.1% of the original furfural alcohol selectivity can be preserved after 10 times of recycling. This work presents a promising green alternative for the valorization of furfural, which also shows great potential extending to the valorization of other biomass compounds.

Development of an Integrated System for Highly Selective Photoenzymatic Synthesis of Formic Acid from CO2

Herein, a Zr-based dual-ligand MOFs with pre-installed Rh complex was employed for NADH regeneration in situ and also used for immobilization of formic acid dehydrogenase (FDH) in order to realize a highly efficient CO₂ fixation system. Then, based on the detailed investigations into the photochemical and electrochemical properties, it is demonstrated that the introduction of the photosensitive meso-tetra(4-carboxyphenyl) porphin (TCPP) ligands increased the catalytic active sites and improved photoelectric properties. Furthermore, the electron mediator Rh complex, anchored on the zirconium-based dual-ligand MOFs, enhanced the efficiency of electron transfer efficiency and facilitated the separation of photogenerated electrons and holes. Compared with UiO-66-NH₂ , Rh-H₂ TCPP-UiO-66-NH₂ exhibits an optimized valence band structure and significantly improved photocatalytic activity for NAD⁺ reduction, resulting the synthesis of formic acid from CO₂ increased from 150 μg mL^-1 (UiO-66-NH₂ ) to 254 μg mL^-1 (Rh-H₂ TCPP-UiO-66-NH₂ ). Moreover, the assembled photocatalyst-enzyme coupled system also allows facile recycling of expensive electron mediator, enzyme, and photocatalyst.

Bioelectrocatalysis for CO2 reduction: recent advances and challenges to develop a sustainable system for CO2 utilization

Activation and turning CO₂ into value added products is a promising orientation to address environmental issues caused by CO₂ emission. Currently, electrocatalysis has a potent well-established role for CO₂ reduction with fast electron transfer rate; but it is challenged by the poor selectivity and low faradic efficiency. On the other side, biocatalysis, including enzymes and microbes, has been also employed for CO₂ conversion to target C_n products with remarkably high selectivity; however, low solubility of CO₂ in the liquid reaction phase seriously affects the catalytic efficiency. Therefore, a new synergistic role in bioelectrocatalysis for CO₂ reduction is emerging thanks to its outstanding selectivity, high faradic efficiency, and desirable valuable C_n products under mild condition that are surveyed in this review. Herein, we comprehensively discuss the results already obtained for the integration craft of enzymatic-electrocatalysis and microbial-electrocatalysis technologies. In addition, the intrinsic nature of the combination is highly dependent on the electron transfer. Thus, both direct electron transfer and mediated electron transfer routes are modeled and concluded. We also explore the biocompatibility and synergistic effects of electrode materials, which emerge in combination with tuned enzymes and microbes to improve catalytic performance. The system by integrating solar energy driven photo-electrochemical technics with bio-catalysis is further discussed. We finally highlight the significant findings and perspectives that have provided strong foundations for the remarkable development of green and sustainable bioelectrocatalysis for CO₂ reduction, and that offer a blueprint for C_n valuable products originate from CO₂ under efficient and mild conditions.

Rhodium-Based MOF-on-MOF Difunctional Core-Shell Nanoreactor for NAD(P)H Regeneration and Enzyme Directed Immobilization

An organometallic complex-catalyzed artificial coenzyme regeneration system has attracted widespread attention. However, the combined use of organometallic complex catalysts and natural enzymes easily results in mutual inactivation. Herein, we establish a rhodium-based metal-organic framework (MOF)-on-MOF difunctional core-shell nanoreactor as an artificial enzymatic NAD(P)H regeneration system. UiO67 as the core is used to capture rhodium molecules for catalyzing NAD(P)H regeneration. UiO66 as the shell is used to specifically immobilize His-tagged lactate dehydrogenase (LDH) and serve as a protection shield for LDH and [Cp*Rh(bpy)Cl]⁺ to prevent mutual inactivation. A variety of results indicate that UiO67@Rh@UiO66 has good activity in realizing NAD(P)H regeneration. Noteworthily, UiO67@Rh@UiO66@LDH maintains a high activity level even after 10 cycles. This work reports a novel NAD(P)H regeneration platform to open up a new avenue for constructing chemoenzyme coupling systems.

Selective Furfuryl Alcohol Production from Furfural via Bio-Electrocatalysis

The catalytic reduction of renewable furfural into furfuryl alcohol for various applications is in the ascendant. Nonetheless, the conventional chemo-catalysis hydrogenation of furfural always suffers from poor selectivity, harsh conditions, and expensive catalysts. Herein, to overcome the serious technical barriers of conventional furfuryl alcohol production, an alternative bio-electrocatalytic hydrogenation system was established under mild and neutral conditions, where the dissolved cofactor (NADH) and the alcohol dehydrogenase (ADH) participated in a tandem reaction driven by the electron from a novel Rh (III) complex fixed cathode. Under the optimized conditions, 81.5% of furfural alcohol selectivity can be realized at −0.43 V vs. RHE. This contribution presents a ‘green’ and promising route for the valorization of furfural and other biomass compounds.

Demystifying the roles of single metal site and cluster in CO2 reduction via light and electric dual-responsive polyoxometalate-based metal-organic frameworks

Photo- or electroreduction of carbon dioxide into highly valued products offers a promising strategy to achieve carbon neutrality. Here, a series of polyoxometalate-based metal-organic frameworks (M-POMOFs) were constructed by metalloporphyrins [tetrakis(4-carboxyphenyl)-porphyrin-M (M-TCPPs)] and reductive POM for photo- and electrocatalytic carbon dioxide reductions (PCR and ECR, respectively), and the mysteries between the roles of single metal site and cluster in catalysis were disclosed. Iron-POMOF exhibited an excellent selectivity (97.2%) with high methane production of 922 micromoles per gram in PCR, together with superior Faradaic efficiency for carbon dioxide to carbon monoxide (92.1%) in ECR. The underlying mechanisms were further clarified. Photogenerated electrons transferred from iron-TCPP to the POM cluster for methane generation under irradiation, while the abundant electrons flowed to the center of iron-TCPP for carbon monoxide formation under the applied electric field. The specific multielectron products generated on iron-POMOF through switching driving forces to control electron flow direction between single metal site and cluster catalysis.

Redox Biocatalysis: Quantitative Comparisons of Nicotinamide Cofactor Regeneration Methods

Enzymatic processes, particularly those capable of performing redox reactions, have recently been of growing research interest. Substrate specificity, optimal activity at mild temperatures, high selectivity, and yield are among the desirable characteristics of these oxidoreductase catalyzed reactions. Nicotinamide adenine dinucleotide (phosphate) or NAD(P)H-dependent oxidoreductases have been extensively studied for their potential applications like biosynthesis of chiral organic compounds, construction of biosensors, and pollutant degradation. One of the main challenges associated with making these processes commercially viable is the regeneration of the expensive cofactors required by the enzymes. Numerous efforts have pursued enzymatic regeneration of NAD(P)H by coupling a substrate reduction with a complementary enzyme catalyzed oxidation of a co-substrate. While offering excellent selectivity and high total turnover numbers, such processes involve complicated downstream product separation of a primary product from the coproducts and impurities. Alternative methods comprising chemical, electrochemical, and photochemical regeneration have been developed with the goal of enhanced efficiency and operational simplicity compared to enzymatic regeneration. Despite the goal, however, the literature rarely offers a meaningful comparison of the total turnover numbers for various regeneration methodologies. This comprehensive Review systematically discusses various methods of NAD(P)H cofactor regeneration and quantitatively compares performance across the numerous methods. Further, fundamental barriers to enhanced cofactor regeneration in the various methods are identified, and future opportunities are highlighted for improving the efficiency and sustainability of commercially viable oxidoreductase processes for practical implementation.

Fine-Tuning the Electrocatalytic Regeneration of NADH Cofactor Using [Rh(Cp*)(bpy)Cl]+-Functionalized Metal-Organic Framework Films

Electrochemical regeneration of the reduced form of the nicotinamide adenine dinucleotide (NADH) cofactor catalyzed by immobilized [Rh(Cp*)(bpy)Cl]⁺ is a promising approach for the enzymatic synthesis of many valuable chemicals with NAD-dependent dehydrogenases. However, rational control of the efficiency is often limited by the irregular structure of the electrode/electrolyte interface and the accessibility of the molecular catalyst. Here, we propose an electrochemical system for NADH cofactor regeneration, based on highly ordered three- dimensional (3D) metal-organic framework (NU-1000) films. [Rh(Cp*)(bpy)Cl]⁺ is incorporated at the zirconium nodes of NU-1000 via solvent-assisted ligand incorporation (SALI), leading to a diffusion-controlled behavior, associated with an electron hopping mechanism. Varying the ratio of redox-active [Rh(Cp*)(bpy)Cl]⁺ and inactive postgrafting agents enables the elaboration of functional electrodes with tunable electrocatalytic activity for NADH regeneration. The exceptionally high faradic efficiency of 97%, associated with a very high turnover frequency (TOF) of ∼1400 h^-1 for NADH regeneration, and the total turnover number (TTN) of over 20000 for the enzymatic conversion from pyruvate to l-lactate, when coupled with l-lactate dehydrogenases (LDH) as a model reaction, open up promising perspectives for employing these electrodes in various alternative bioelectrosynthesis approaches.

Non-covalent metalation of carbon nitride for photocatalytic NADH regeneration and enzymatic CO2 reduction

An artificial photocatalyst with a Rh complex immobilized onto polymeric carbon nitride (CN) through non-covalent interaction was constructed for photocatalytic NADH regeneration. DFT calculations verified the adsorption of the bipyridine ligand onto the CN photocatalyst. By further coupling the in situ formed NADH with FDH immobilized on a hydrophobic membrane, an enhanced HCOOH production (3.1 mM) from CO₂ could be realized on the gas-liquid-solid three-phase interface. This work provides an alternative and efficient strategy for promoting artificial photosynthesis.

Improving the Enzymatic Cascade of Reactions for the Reduction of CO2 to CH3OH in Water: From Enzymes Immobilization Strategies to Cofactor Regeneration and Cofactor Suppression

The need to decrease the concentration of CO2 in the atmosphere has led to the search for strategies to reuse such molecule as a building block for chemicals and materials or a source of carbon for fuels. The enzymatic cascade of reactions that produce the reduction of CO2 to methanol seems to be a very attractive way of reusing CO2; however, it is still far away from a potential industrial application. In this review, a summary was made of all the advances that have been made in research on such a process, particularly on two salient points: enzyme immobilization and cofactor regeneration. A brief overview of the process is initially given, with a focus on the enzymes and the cofactor, followed by a discussion of all the advances that have been made in research, on the two salient points reported above. In particular, the enzymatic regeneration of NADH is compared to the chemical, electrochemical, and photochemical conversion of NAD+ into NADH. The enzymatic regeneration, while being the most used, has several drawbacks in the cost and life of enzymes that suggest attempting alternative solutions. The reduction in the amount of NADH used (by converting CO2 electrochemically into formate) or even the substitution of NADH with less expensive mimetic molecules is discussed in the text. Such an approach is part of the attempt made to take stock of the situation and identify the points on which work still needs to be conducted to reach an exploitation level of the entire process.

Confining enzymes in porous organic frameworks: from synthetic strategy and characterization to healthcare applications

Enzymes are a class of natural catalysts with high efficiency, specificity, and selectivity unmatched by their synthetic counterparts and dictate a myriad of reactions that constitute various cascades in living cells. The development of suitable supports is significant for the immobilization of structurally flexible enzymes, enabling biomimetic transformation in the extracellular environment. Accordingly, porous organic frameworks, including metal organic frameworks (MOFs), covalent organic frameworks (COFs) and hydrogen-bonded organic frameworks (HOFs), have emerged as ideal supports for the immobilization of enzymes because of their structural features including ultrahigh surface area, tailorable porosity, and versatile framework compositions. Specially, organic framework-encased enzymes have shown significant enhancement in stability and reusability, and their tailorable pore opening provides a gatekeeper-like effect for guest sieving, which is beneficial for mimicking intracellular biocatalysis processes. This immobilization technique brings new insight into the development of next-generation enzyme materials and shows huge potential in healthcare applications, such as biomarker diagnosis, biostorage, and cancer and antibacterial therapies. In this review, we describe the state-of-the-art strategies for the structural immobilization of enzymes using the well-explored MOFs and burgeoning COFs and HOFs as scaffolds, with special emphasis on how these porous framework-confined technologies can provide a favorable microenvironment for mimicking natural biocatalysis. Subsequently, advanced characterization techniques for enzyme conformation, the effect of the confined microenvironment on the activity of enzymes, and the emerging healthcare applications will be surveyed.

Bioinspired Metalation of the Metal-Organic Framework MIL-125-NH2 for Photocatalytic NADH Regeneration and Gas-Liquid-Solid Three-Phase Enzymatic CO2 Reduction

Coenzyme NADH regeneration is crucial for sustained photoenzymatic catalysis of CO₂ reduction. However, light-driven NADH regeneration still suffers from the low regeneration efficiency and requires the use of a homogeneous Rh complex. Herein, a Rh complex-based electron transfer unit was chemically attached onto the linker of the MIL-125-NH₂ . The coupling between the light-harvesting iminopyridine unit and electron-transferring Rh-complex facilitated the photo-induced electron transfer for the NADH regeneration with the yield of 66.4 % in 60 mins for 5 cycles. The formate dehydrogenase was further deposited onto the hydrophobic layer of the membrane by a reverse filtering technique, which forms the gas-liquid-solid reaction interface around the enzyme site. It gave an enhanced formic acid yield of 9.5 mM in 24 hours coupled with the in situ regenerated NADH. The work could shed light on the construction of integrated inorganic-enzyme hybrid systems for artificial photosynthesis.

Strategies for overcoming the limitations of enzymatic carbon dioxide reduction

The overexploitation of fossil fuels has led to a significant increase in atmospheric carbon dioxide (CO₂) concentrations, thereby causing problems, such as the greenhouse effect. Rapid global climate change has caused researchers to focus on utilizing CO₂ in a green and efficient manner. One of the ways to achieve this is by converting CO₂ into valuable chemicals via chemical, photochemical, electrochemical, or enzymatic methods. Among these, the enzymatic method is advantageous because of its high specificity and selectivity as well as the mild reaction conditions required. The reduction of CO₂ to formate, formaldehyde, and methanol using formate dehydrogenase (FDH), formaldehyde dehydrogenase (F_aldDH), and alcohol dehydrogenase (ADH) are attractive routes, respectively. In this review, strategies for overcoming the common limitations of enzymatic CO₂ reduction are discussed. First, we present a brief background on the importance of minimizing of CO₂ emissions and introduce the three bottlenecks limiting enzymatic CO₂ reduction. Thereafter, we explore the different strategies for enzyme immobilization on various support materials. To solve the problem of cofactor consumption, different state-of-the-art cofactor regeneration strategies as well as research on the development of cofactor substitutes and cofactor-free systems are extensively discussed. Moreover, aiming at improving CO₂ solubility, biological, physical, and engineering measures are reviewed. Finally, conclusions and future perspectives are presented.

Natural Deep Eutectic Solvents Enhanced Electro-Enzymatic Conversion of CO2 to Methanol

Electro-enzymatic conversion of CO₂ offers a promising solution for CO₂ utilization, while the conversion rate and efficiency were disappointing. To address the challenge, four kinds of natural deep eutectic solvents (NADES) with desirable biocompatibility were developed for the first time and used as the co-electrolyte in the electro-enzymatic conversion of CO₂. As a result, the SerGly-based solution presents high CO₂ solubility and high electrocatalytic activity, compared to the conventional buffer. By applying SerGly in the electro-enzymatic conversion of CO₂, the yield of the product (methanol) is two times higher than that in the Tris-HCl buffer (0.22 mM) and 16 times higher than the control reaction.

Electrostatically cooperative host-in-host of metal cluster ⊂ ionic organic cages in nanopores for enhanced catalysis

The construction of hierarchically nanoporous composite for high-performance catalytic application is still challenging. In this work, a series of host-in-host ionic porous materials are crafted by encapsulating ionic organic cages into a hyper-crosslinked, oppositely charged porous poly(ionic liquid) (PoPIL) through an ion pair-directed assembly strategy. Specifically, the cationic cage (C-Cage) as the inner host can spatially accommodate a functional Au cluster, forming a [Au⊂C-Cage+]⊂PoPIL- supramolecular composite. This dual-host molecular hierarchy enables a charge-selective substrate sorting effect to the Au clusters, which amplifies their catalytic activity by at least one order of magnitude as compared to Au confined only by C-Cage as the mono-host (Au⊂C-Cage+). Moreover, we demonstrate that such dual-host porous system can advantageously immobilize electrostatically repulsive Au⊂C-Cage+ and cationic ferrocene co-catalyst (Fer+) together into the same microcompartments, and synergistically speed up the enzyme-like tandem reactions by channelling the substrate to the catalytic centers via nanoconfinement.

Formic Acid Dehydrogenation Using Noble-Metal Nanoheterogeneous Catalysts: Towards Sustainable Hydrogen-Based Energy

The need for sustainable energy sources is now more urgent than ever, and hydrogen is significant in the future of energy. However, several obstacles remain in the way of widespread hydrogen use, most of which are related to transport and storage. Dilute formic acid (FA) is recognized asa a safe fuel for low-temperature fuel cells. This review examines FA as a potential hydrogen storage molecule that can be dehydrogenated to yield highly pure hydrogen (H2) and carbon dioxide (CO2) with very little carbon monoxide (CO) gas produced via nanoheterogeneous catalysts. It also present the use of Au and Pd as nanoheterogeneous catalysts for formic acid liquid phase decomposition, focusing on the influence of noble metals in monometallic, bimetallic, and trimetallic compositions on the catalytic dehydrogenation of FA under mild temperatures (20–50 °C). The review shows that FA production from CO2 without a base by direct catalytic carbon dioxide hydrogenation is far more sustainable than existing techniques. Finally, using FA as an energy carrier to selectively release hydrogen for fuel cell power generation appears to be a potential technique.

Fabrication of a biocathode for formic acid production upon the immobilization of formate dehydrogenase from Candida boidinii on a nanoporous carbon

The immobilization of the non-metallic enzyme formate dehydrogenase from Candida boidinii (CbFDH) into a nanoporous carbon with appropriate pore structure was explored for the bioelectrochemical conversion of CO₂ to formic acid (FA). Higher FA production rates were obtained upon immobilization of CbFDH compared to the performance of the enzyme in solution, despite the lower nominal CbFDH to NADH (β-nicotinamide adenine dinucleotide reduced) cofactor ratio and the lower amount of enzyme immobilized. The co-immobilization of the enzyme and a rhodium complex as mediator in the nanoporous carbon allowed the electrochemical regeneration of the cofactor. Preparative electrosynthesis of FA carried out on biocathodes of relatively large dimensions (ca. 3 cm × 2 cm) confirmed the higher production rate of FA for the immobilized enzyme. Furthermore, the incorporation of a Nafion binder in the biocathodes did not modify the immobilization extent of the CbFDH in the carbon support. Coulombic efficiencies close to 46% were obtained for the electrosynthesis carried out at -0.8 V for the biocathodes prepared using the lowest Nafion binder content and the co-immobilized enzyme and rhodium redox mediator. Although these values may yet be improved, they confirm the feasibility of these biocathodes in larger scales (6 cm²) beyond most common electrode dimensions reported in the literature (ca. a few mm²).