Stable J‐Aggregation of an aza‐BODIPY‐Lipid in a Liposome for Optical Cancer Imaging

NIR-II Photosensitizer-Based Nanoparticles Defunctionalizing Mitochondria to Overcome Tumor Self-Defense by Promoting Heat Shock Protein 40

Inherent self-defense pathways within malignant tumors include the action of heat shock proteins (HSPs) and often impede photothermal therapy efficacy. Interestingly, HSP40 inhibits glycolysis and disrupts mitochondrial function to overcome tumor self-defense mechanisms and exhibits a tumor-suppressive effect. Reactive oxygen species (ROS), especially hydroxyl radicals, generated by type-I photodynamic therapy inhibit adenosine triphosphate (ATP) production and lead to ATP-independent HSP40 overexpression during heat stress. However, the regulatory mechanisms linking heat and hydroxyl radicals to induce HSP40 expression remain unclear. Therefore, it is imperative to elucidate the underlying mechanism governing the induction of HSP40 expression during heat stress and explore its potential as a promising therapeutic strategy against tumor development. By strategically modifying the aza-BODIPY structure to precisely distribute the excited-state energy, we have demonstrated that HSP40 specific expression is correlated with the proportion of heat to hydroxyl radicals rather than their individual levels. This orchestrated NIR-II photosensitizer-based nanoparticles reduced tumor glycolysis and disrupted ATP production, driving cell apoptosis and amplifying the efficacy of photothermal therapy. Silencing and compensation of HSPs under heat and ROS stress represent a promising and effective strategy for overcoming tumor self-defense mechanisms in cancer therapy.

Pre-clinical study of IR808 dye for cervical cancer in vitro and in vivo imaging

There is an urgent need for improved methods for early screening and rapid diagnosis of cervical cancer since current conventional screening methods are plagued by operator subjectivity and unnecessary biopsies. IR808 is a tumour-targeting near-infrared (NIR) fluorescent dye that permits NIR imaging without the requirement of chemical conjugation. Our study investigates an IR808-based strategy for real-time monitoring of the cervix in vivo and rapid assessment of cervical specimens in vitro. We investigated the uptake of IR808 in vitro using normal cervical epithelial cells and three cervical cancer cell lines. The biodistribution of IR808 was examined in vivo via intravenous injection into tumour-bearing mice. Additionally, in vitro tissues were stained with IR808 to simulate the identification of cervical tumors in the clinical setting. Biocompatibility of the dye in both cellular and animal models was also examined. IR808 exhibited significant tumour-to-background ratios in fluorescence molecular imaging of in vivo tumors in nude mice. The application of NIR fluorescent dye IR808 in specific imaging screening, safe and non-invasive real-time monitoring, and rapid identification of cervical tumors from tissue specimens is expected to improve current screening methods for cervical cancer.

Water Transportation through Nano/Microsized Lipid Protocells with a Significant Deviation from the van't Hoff Osmotic Rule

Osmotic pressure is known to be an important driving force that induces water transport through membranes, which is crucial for many biophysical processes. Here, we observed that under a relatively low osmotic pressure induced by sugars' protocells (vesicles) with a diameter of ∼110 nm barely shrank. However, NaCl and CaCl2 at lower concentrations induced a rapid decrease in the vesicle size as evidence of water transportation through the membrane. An additional mechanical pressure resulting from the increase in interfacial tension of the lipid membrane was proposed to be the main driving force of this electrolyte-specific effect. These results indicate that osmotic pressure is not the only driving force of water transport in nano/microsized lipid protocells.

Size-Controlled Self-Assembly for Bimodal In Vivo Imaging

Contrast agents (CAs) are essential in biomedical imaging to aid in the diagnosis and therapy monitoring of disease. However, they are typically restricted to one imaging modality and have fixed properties such as size, shape, toxicity profile, or photophysical characteristics, which hampers a comprehensive view of biological processes. Herein, rationally designed dye assemblies are introduced as a unique CA platform for simultaneous multimodal and multiscale biomedical imaging. To this end, a series of amphiphilic aza-BODIPY dyes are synthesized with varying hydrophobic domains (C1, C8, C12, and C16) that self-assemble in aqueous media into nanostructures of tunable size (50 nm-1 µm) and photophysical properties. While C1 exhibits oblique-type exciton coupling and negligible emission, C8-C16 bearing longer alkyl chains undergo J-type aggregation with NIR absorption and emission and excellent photoacoustic properties. Given these advantageous features, aza-BODIPY specific, semi-quantitative fluorescence reflectance and photoacoustic imaging both in vitro and in vivo are established. Additionally, in vitro cell viability as well as murine in vivo biodistribution analysis with ex vivo validation showed excellent biocompatibility and a size-dependent biodistribution of nanostructures to different organ beds. These results broaden the scope of aqueous self-assembly to multimodal imaging and highlight its great potential for rationalizing numerous biomedical questions.

Supramolecular Modulation of Tumor Microenvironment Through Host-Guest Recognition and Metal Coordination to Potentiate Cancer Chemoimmunotherapy

The massive amount of indoleamine 2,3-dioxygenase 1 (IDO-1) in tumor cells and tumor-associated immune cells forms a feedback loop that maintains immunosuppressive tumor microenvironment (ITM) and causes immune escape, resulting in the poor prognosis of platinum chemotherapeutics. However, the effective systemic administration of platinum drugs and IDO-1 inhibitors is strictly limited by their distinct chemical construction, different pharmacokinetic profiles, and heterogeneous distributions. Herein, a novel supramolecular method with the capability to modulate tumor microenvironment is proposed aiming at potentiating the antitumor efficacy of chemoimmunotherapy. Profiting from the dynamic and reversible merits of noncovalent interactions, IDO-1 inhibitor (IDOi) and 1,2-diaminocyclohexane-platinum(II) (DACHPt) are tailor-encapsulated into supramolecular nanoparticles (SNPs) with the aid of host-guest recognition and metal coordination, respectively, effectively increasing the drug loading and improving their pharmacokinetics. In addition to the authorized chemotherapeutical effect, DACHPt performs a systemic antitumor immune response, which is further magnified by the IDOi-reversed ITM to encourage T lymphocyte infiltration, guaranteeing long-term antitumor immune responses to improve cancer prognosis.

Using a stable radical as an "electron donor" to develop a radical photosensitizer for efficient type-I photodynamic therapy

Among type I photosensitizers, stable organic radicals are superior candidate molecules for hypoxia-overcoming photodynamic therapy. However, their wide applications are limited by complicated preparation processes and poor stabilities. Herein, a nitroxide radical was simply synthesized by introducing a commercially available "TEMPO" moiety. The radical exhibits efficient type-I ROS generation and appreciable photo-cytotoxicity under hypoxia, which open up a new avenue for the exploration of a novel and efficient type-I photosensitizer.

Self-Assembled BODIPY@Au Core-Shell Structures for Durable Neuroprotective Phototherapy

BODIPY analogs are promising photosensitizers for molecular phototherapy; however, they exhibit high dark cytotoxicity and limited singlet oxygen generation capacity. In this study, we developed self-assembled core-shell nanophotosensitizers by linking a bipyridine group to BODIPY (Bpy-BODIPY) and promoting J-aggregation on gold nanourchins. This design enhances photostability and reduces the energy gap between the lowest singlet excited state and the lower triplet state, facilitating efficient singlet oxygen production. We characterized these nanophotosensitizers using UV-visible spectroscopy, transmission electron microscopy (TEM), surface-enhanced Raman spectroscopy (SERS) and dynamic light scattering (DLS), which confirmed the formation of the desired core-shell structure and J-aggregates. Notably, Bpy-BODIPY@Au significantly suppresses tau protein aggregation and enhances neuroprotective action, even in the presence of a phosphatase inhibitor. This work broadens the application of BODIPY chemistry to nanoagents for neuroprotective therapy.

The Current Status and Future Directions on Nanoparticles for Tumor Molecular Imaging

Molecular imaging is an advanced technology that utilizes specific probes or markers in conjunction with cutting-edge imaging techniques to observe and analyze the localization, distribution, activity, and interactions of biomolecules within living organisms. Tumor molecular imaging, by enabling the visualization and quantification of molecular characteristics of tumor cells, facilitates a deeper and more comprehensive understanding of tumors, providing valuable insights for early diagnosis, treatment monitoring, and cancer biology research. However, the image quality of molecular imaging still requires improvement, and nanotechnology has significantly propelled the advancement of molecular imaging. Currently, nanoparticle-based tumor molecular imaging technologies encompass radionuclide imaging, fluorescence imaging, magnetic resonance imaging, ultrasound imaging, photoacoustic imaging, and multimodal imaging, among others. As our understanding of the tumor microenvironment deepens, the design of nanoparticle probes for tumor molecular imaging has also evolved, offering new perspectives and expanding the applications of tumor molecular imaging. Beyond diagnostics, there is a marked trend towards integrated diagnosis and therapy, with image-guided treatment playing a pivotal role. This includes image-guided surgery, photodynamic therapy, and chemodynamic therapy. Despite continuous advancements and innovative developments in molecular imaging, many of these remain in the experimental stage and require breakthroughs before they can be fully integrated into clinical practice.

Supramolecular engineering cascade regulates NIR-II J-aggregates to improve photodynamic therapy

Rational design of small organic molecule-based NIR-II photosensitizers (PSs) with high singlet oxygen quantum yield in aqueous solution for deep tissue imaging and cancer therapy still presents challenges. Herein, we devised a general synthesis strategy to obtain six NIR-II region PSs with tunable aggregation states by adjusting the steric effect, and all PSs possess longer NIR absorption/emission wavelengths with tails extending beyond 1200 nm. Notably, ATX-6 possessed a singlet oxygen quantum yield of 38.2% and exhibited concentration-dependent J-aggregation properties upon self-assembly in an aqueous solution. What's more, supramolecular engineering with DSPE-PEG2000 further enhanced its degree of J-aggregation, which was attributed to the dimer-excited reduction of the energy levels of the single-linear/triple-linear states and the facilitation of intersystem crossover processes. In addition, ATX-6 NPs showed superior photodynamic therapy effects and great potential in high-contrast in vivo bioimaging of the NIR-II region. These results provide valuable insights for achieving the diagnostic and therapeutic integration of tumors.

Supramolecular dye nanoassemblies for advanced diagnostics and therapies

Dyes have conventionally been used in medicine for staining cells, tissues, and organelles. Since these compounds are also known as photosensitizers (PSs) which exhibit photoresponsivity upon photon illumination, there is a high desire towards formulating these molecules into nanoparticles (NPs) to achieve improved delivery efficiency and enhanced stability for novel imaging and therapeutic applications. Furthermore, it has been shown that some of the photophysical properties of these molecules can be altered upon NP formation thereby playing a major role in the outcome of their application. In this review, we primarily focus on introducing dye categories, their formulation strategies and how these strategies affect their photophysical properties in the context of photothermal and non-photothermal applications. More specifically, the most recent progress showing the potential of dye supramolecular assemblies in modalities such as photoacoustic and fluorescence imaging, photothermal and photodynamic therapies as well as their employment in photoablation as a novel modality will be outlined. Aside from their photophysical activity, we delve shortly into the emerging application of dyes as drug stabilizing agents where these molecules are used together with aggregator molecules to form stable nanoparticles.

Metal-Free Catalytic Formation of a Donor-Acceptor-Donor Molecule and Its Lewis Acid-Adduct Singlet Diradical with High-Efficient NIR-II Photothermal Conversion

We have synthesized a quinone-incorporated bistriarylamine donor-acceptor-donor (D-A-D) semiconductor 1 by B(C6F5)3 (BCF) catalyzed C-H/C-H cross coupling via radical ion pair intermediates. Coordination of Lewis acids BCF and Al(ORF)3 (RF=C(CF3)3) to the semiconductor 1 afforded diradical zwitterions 2 and 3 by integer electron transfer. Upon binding to Lewis acids, the LUMO energy of 1 is significantly lowered and the band gap of the semiconductor is significantly narrowed from 1.93 eV (1) to 1.01 eV (2) and 1.06 eV (3). 2 and 3 are rare near-infrared (NIR) diradical dyes with broad absorption both centered around 1500 nm. By introducing a photo BCF generator, 2 can be generated by light-dependent control. Furthermore, the integer electron transfer process can also be reversibly regulated via the addition of CH3CN. In addition, the temperature of 2 sharply increased and reached as high as 110 °C in 10 s upon the irradiation of near-infrared-II (NIR-II) laser (1064 nm, 0.7 W cm-2), exhibiting a fast response to laser. It displays excellent photothermal stability with a photothermal (PT) conversion efficiency of 62.26 % and high-quality PT imaging.

Rational design of CT-coupled J-aggregation platform based on Aza-BODIPY for highly efficient phototherapy

Supramolecular engineering is exceptionally appealing in the design of functional materials, and J-aggregates resulting from noncovalent interactions offer intriguing features. However, building J-aggregation platforms remains a significant challenge. Herein, we report 3,5-dithienyl Aza-BODIPYs with a donor-acceptor-donor (D-A-D) architecture as the first charge transfer (CT)-coupled J-aggregation BODIPY-type platform. The core acceptor moieties in one molecule interact with donor units in neighboring molecules to generate slip-stacked packing motifs, resulting in CT-coupled J-aggregation with a redshifted wavelength up to 886 nm and an absorption tail over 1100 nm. The J-aggregates show significant photoacoustic signals and high photothermal conversion efficiency of 66%. The results obtained in vivo show that the J-aggregates have the potential to be used for tumor photothermal ablation and photoacoustic imaging. This study not only demonstrates Aza-BODIPY with D-A-D as a novel CT-coupled J-aggregation platform for NIR phototherapy materials but also motivates further study on the design of J-aggregation.

Nanocarriers address intracellular barriers for efficient drug delivery, overcoming drug resistance, subcellular targeting and controlled release

The cellular barriers are major bottlenecks for bioactive compounds entering into cells to accomplish their biological functions, which limits their biomedical applications. Nanocarriers have demonstrated high potential and benefits for encapsulating bioactive compounds and efficiently delivering them into target cells by overcoming a cascade of intracellular barriers to achieve desirable therapeutic and diagnostic effects. In this review, we introduce the cellular barriers ahead of drug delivery and nanocarriers, as well as summarize recent advances and strategies of nanocarriers for increasing internalization with cells, promoting intracellular trafficking, overcoming drug resistance, targeting subcellular locations and controlled drug release. Lastly, the future perspectives of nanocarriers for intracellular drug delivery are discussed, which mainly focus on potential challenges and future directions. Our review presents an overview of intracellular drug delivery by nanocarriers, which may encourage the future development of nanocarriers for efficient and precision drug delivery into a wide range of cells and subcellular targets.

Filamentous-Actin-Mimicking Nanoplatform for Enhanced Cytosolic Protein Delivery

Despite the potential of protein therapeutics, the cytosolic delivery of proteins with high efficiency and bioactivity remains a significant challenge owing to exocytosis and lysosomal degradation after endocytosis. Therefore, it is important to develop a safe and efficient strategy to bypass endocytosis. Inspired by the extraordinary capability of filamentous-actin (F-actin) to promote cell membrane fusion, a cyanine dye assembly-containing nanoplatform mimicking the structure of natural F-actin is developed. The nanoplatform exhibits fast membrane fusion to cell membrane mimics and thus enters live cells through membrane fusion and bypasses endocytosis. Moreover, it is found to efficiently deliver protein cargos into live cells and quickly release them into the cytosol, leading to high protein cargo transfection efficiency and bioactivity. The nanoplatform also results in the superior inhibition of tumor cells when loaded with anti-tumor proteins. These results demonstrate that this fusogenic nanoplatform can be valuable for cytosolic protein delivery and tumor treatment.

Particle Engineering via Supramolecular Assembly of Macroscopic Hydrophobic Building Blocks

Tailoring the hydrophobicity of supramolecular assembly building blocks enables the fabrication of well-defined functional materials. However, the selection of building blocks used in the assembly of metal-phenolic networks (MPNs), an emerging supramolecular assembly platform for particle engineering, has been essentially limited to hydrophilic molecules. Herein, we synthesized and applied biscatechol-functionalized hydrophobic polymers (poly(methyl acrylate) (PMA) and poly(butyl acrylate) (PBA)) as building blocks to engineer MPN particle systems (particles and capsules). Our method allowed control over the shell thickness (e.g., between 10 and 21 nm), stiffness (e.g., from 10 to 126 mN m-1 ), and permeability (e.g., 28-72 % capsules were permeable to 500 kDa fluorescein isothiocyanate-dextran) of the MPN capsules by selection of the hydrophobic polymer building blocks (PMA or PBA) and by controlling the polymer concentration in the MPN assembly solution (0.25-2.0 mM) without additional/engineered assembly processes. Molecular dynamics simulations provided insights into the structural states of the hydrophobic building blocks during assembly and mechanism of film formation. Furthermore, the hydrophobic MPNs facilitated the preparation of fluorescent-labeled and bioactive capsules through postfunctionalization and also particle-cell association engineering by controlling the hydrophobicity of the building blocks. Engineering MPN particle systems via building block hydrophobicity is expected to expand their use.

Aza-BODIPY-based polymeric nanoparticles for photothermal cancer therapy in a chicken egg tumor model

A new push-pull aza-BODIPY (AZB-CF3) derivative comprised of dimethylamino groups and trifluoromethyl moieties was successfully synthesized. This derivative exhibited broad absorption in the near-infrared region in the range from 798 to 832 nm. It also exhibited significant near-infrared (NIR) signals in low-polar solvents with emission peaks around 835-940 nm, while non-fluorescence in high-polar environments due to the twisted intramolecular charge transfer (TICT) phenomenon. The nanoprecipitation of this compound with phospholipid-based polyethylene glycol (DSPE-PEG) yielded AZB-CF3@DSPE-PEG nanoparticles (NPs) with a hydrodynamic size of 70 nm. The NPs exhibited good photostability, colloidal stability, biocompatibility, and excellent photothermal (PTT) competence with a conversion efficiency (η) of 44.9%. These NPs were evaluated in vitro and in ovo in a 4T1 breast cancer cell line for NIR light-trigger photothermal therapy. Proven in the chicken egg tumor model, AZB-CF3@DSPE-PEG NPs induced severe vascular damage (∼40% vascular destruction), showed great anticancer efficacy (∼75% tumor growth inhibition), and effectively inhibited distant metastasis via photothermal treatment. As such, this PTT-based nanocarrier system could be a potential candidate for a clinical cancer therapy approach.

J-Aggregation Strategy toward Potentiated NIR-II Fluorescence Bioimaging of Molecular Fluorophores

Molecular fluorophores emitting in the second near-infrared (NIR-II, 1000-1700 nm) window with strong optical harvesting and high quantum yields hold great potential for in vivo deep-tissue bioimaging and high-resolution biosensing. Recently, J-aggregates are harnessed to engineer long-wavelength NIR-II emitters and show unique superiority in tumor detection, vessel mapping, surgical navigation, and phototheranostics due to their bathochromic-shifted optical bands in the required slip-stacked arrangement aggregation state. However, despite the preliminary progress of NIR-II J-aggregates and theoretical study of structure-property relationships, further paradigms of NIR-II J-aggregates remain scarce due to the lack of study on aggregated fluorophores with slip-stacked fashion. In this effort, how to utilize the specific molecular structure to form slip-stacked packing motifs with J-type aggregated exciton coupling is emphatically elucidated. First, several molecular regulating strategies to achieve NIR-II J-aggregates containing intermolecular interactions and external conditions are positively summarized and deeply analyzed. Then, the recent reports on J-aggregates for NIR-II bioimaging and theranostics are systematically summarized to provide a clear reference and direction for promoting the development of NIR-II organic fluorophores. Eventually, the prospective efforts on ameliorating and promoting NIR-II J-aggregates to further clinical practices are outlined.

Supramolecular Aggregation of Carbon Nanodots

Supramolecular aggregation has provided the archetype concept to understand the variants in an emerging systems property. Herein, we have achieved the supramolecular assembly of carbon nanodots (CDs) for the first time and employ supramolecular aggregation to understand their alteration in photophysical properties. In detail, we have employed the CDs as a block to construct the supramolecular assembly of aggregates in the CDs' antisolvent of ethanol. The CD-based aggregates exhibit complex and organized morphologies with another long-wavelength excitation-dependent emission band. The experimental results and density functional theoretical calculations reveal that the supramolecular assembly of CDs can decrease the energy gap between the ground and excited states, contributing to the new long-wavelength excitation-dependent emission. The supramolecular aggregation can be employed as one universal strategy to manipulate and understand the luminescence of CDs. These findings cast new light to build the emerging systems and understand the light emission of CDs through supramolecular chemistry.

Recent Advances in Organic Molecular-to-Supramolecular Self-Assembled Room-Temperature Phosphorescent Materials for Biomedical Applications

This minireview focuses on recent advancements in organic molecular-to-supramolecular self-assembled room-temperature phosphorescent (RTP) materials and their prospective biomedical applications. RTP materials, having their unique capacity to emit long-lasting phosphorescence at ambient temperature, have piqued researchers' interest in various biological applications, including biosensing, bioimaging, drug delivery, and photodynamic therapy (PDT). These materials have several benefits, including high sensitivity, remarkable photostability, and low cytotoxicity. RTP materials' self-assembly into supramolecular structures improves their performance and broadens their uses. Researchers have built organic RTP systems with long-lasting phosphorescence by leveraging weak noncovalent interactions in aquatic conditions. These materials have demonstrated incredible promise as biosensors that enable sensitive analyte detection and as photosensitizers in PDT that target and sensitize specific cell types. The review also outlines future directions and challenges in developing and utilizing pure organic RTP materials for biological imaging purposes, providing valuable guidelines for their future design and application.

J-Aggregation induced NIR-II fluorescence: an aza-BODIPY luminogen for efficient phototheranostics

The development of organic dyes with emission peaks in the second near-infrared window (NIR-II 1000-1700 nm) is highly desirable for in vivo imaging and imaging-guided phototheranostics. However, the lack of appropriate molecular frameworks and the challenges associated with complex synthesis critically hinder the development of new candidate fluorophores. J-Aggregation is considered as a smart and straightforward way to construct such a therapeutic agent with NIR-II fluorescence imaging properties. Here, we present the design and synthesis of an aza-BODIPY probe (TA). Upon encapsulation within the amphiphilic polymer DSPEG-PEG2000-NH2, TA underwent self-assembly and formed J-aggregates (TAJ NPs), which showed emission at 1020 nm. High spatial resolution and adequate signal-to-noise ratio of the TAJ NPs are demonstrated for noninvasive bioimaging of the vasculature, lymph nodes and bones of mice in the NIR-II region. Moreover, the TAJ NPs exhibited good tumor enrichment efficiency with reduced liver accumulation and significant imaging-guided phototherapy performance against lung cancer cells. Taken together, this work not only introduces a new NIR-II imaging and phototheranostic agent based on J-aggregates, but also provides insight into the development of versatile organic dyes for future clinical implementation.

Orderly Self-Assembly of Organic Fluorophores for Sensing and Imaging

Fluorescence imaging utilizing traditional organic fluorophores is extensively applied in both cellular and in vivo studies. However, it faces significant obstacles, such as low signal-to-background ratio (SBR) and spurious positive/negative signals, primarily due to the facile diffusion of these fluorophores. To cope with this challenge, orderly self-assembled functionalized organic fluorophores have gained significant attention in the past decades. These fluorophores can create nanoaggregates via a well-ordered self-assembly process, thus prolonging their residency time within cells and in vivo settings. The development of self-assembled-based fluorophores is an emerging field, and as such, in this review, we present a summary of the progress and challenges of self-assembly fluorophores, focusing on their development history, self-assembly mechanisms, and biomedical applications. We hope that the insights provided herein will assist scientists in further developing functionalized organic fluorophores for in situ imaging, sensing, and therapy.

A NIR-Activated and Mild-Temperature-Sensitive Nanoplatform with an HSP90 Inhibitor for Combinatory Chemotherapy and Mild Photothermal Therapy in Cancel Cells

Mild photothermal therapy (PTT) shows great potential to treat cancers while avoiding unwanted damage to surrounding normal cells. However, the efficacy of mild PTT is normally moderate because of the low hyperthermia temperature and limited light penetration depth. Chemotherapy has unlimited penetration but often suffers from unsatisfactory efficacy in view of the occurrence of drug resistance, suboptimal drug delivery and release profile. As a result, the combinatory of chemotherapy and mild PTT would integrate their advantages and overcome the shortcomings. Herein, we synthesized an NIR-activatable and mild-temperature-sensitive nanoplatform (BDPII-gel@TSL) composed of temperature-sensitive liposomes (TSL), heat shock protein 90 (HSP90) inhibitor (geldanamycin) and photothermal agent (BDPII), for dual chemotherapy and mild PTT in cancer cells. BDPII, constructed with donor-acceptor moieties, acts as an excellent near-infrared (NIR) photothermal agent (PTA) with a high photothermal conversion efficiency (80.75%). BDPII-containing TSLs efficiently produce a mild hyperthermia effect (42 °C) under laser irradiation (808 nm, 0.5 W cm-2). Importantly, the phase transformation of TSL leads to burst release of geldanamycin from BDPII-gel@TSL, and this contributes to down-regulation of the overexpression of HSP90, ensuring efficient inhibition of cancer cell growth. This research provides a dual-sensitive synergistic therapeutic strategy for cancer cell treatment.

meso-Methyl BODIPY Photocages: Mechanisms, Photochemical Properties, and Applications

meso-methyl BODIPY photocages have recently emerged as an exciting new class of photoremovable protecting groups (PPGs) that release leaving groups upon absorption of visible to near-infrared light. In this Perspective, we summarize the development of these PPGs and highlight their critical photochemical properties and applications. We discuss the absorption properties of the BODIPY PPGs, structure-photoreactivity studies, insights into the photoreaction mechanism, the scope of functional groups that can be caged, the chemical synthesis of these structures, and how substituents can alter the water solubility of the PPG and direct the PPG into specific subcellular compartments. Applications that exploit the unique optical and photochemical properties of BODIPY PPGs are also discussed, from wavelength-selective photoactivation to biological studies to photoresponsive organic materials and photomedicine.

BODIPY as a Multifunctional Theranostic Reagent in Biomedicine: Self-Assembly, Properties, and Applications

The use of boron dipyrromethene (BODIPY) in biomedicine is reviewed. To open, its synthesis and regulatory strategies are summarized, and inspiring cutting-edge work in post-functionalization strategies is highlighted. A brief overview of assembly model of BODIPY is then provided: BODIPY is introduced as a promising building block for the formation of single- and multicomponent self-assembled systems, including nanostructures suitable for aqueous environments, thereby showing the great development potential of supramolecular assembly in biomedicine applications. The frontier progress of BODIPY in biomedical application is thereafter described, supported by examples of the frontiers of biomedical applications of BODIPY-containing smart materials: it mainly involves the application of materials based on BODIPY building blocks and their assemblies in fluorescence bioimaging, photoacoustic imaging, disease treatment including photodynamic therapy, photothermal therapy, and immunotherapy. Lastly, not only the current status of the BODIPY family in the biomedical field but also the challenges worth considering are summarized. At the same time, insights into the future development prospects of biomedically applicable BODIPY are provided.

Hybridization of triphenylamine to BODIPY dyes at the 3,5,8-positions: A facile strategy to construct near infra-red aggregation-induced emission luminogens with intramolecular charge transfer for cellular imaging

A series of five BODIPY derivatives with triarylamine (TPA) moieties on their 3-, 5-, or 8-positions were reported, which showed wide-range fluorescence emissions across red and near infrared regions in their aggregation states. The influences of numbers and substituted positions of TPA groups on the optical and aggregation-induced emission (AIE) properties of these BODIPYs as well as organelle-specific imaging in live cells were investigated. The TPA groups installed at 3-/5-positions of BODIPY could effectively enlarge the conjugated system and red-shift the absorption and emission bands (λ_em^max up to 815 nm). In contrast, the TPA group linked to 8-position of BODIPY core has little contribution to decrease the HOMO-LUMO energy gap. Importantly, regardless the substitution positions of TPA groups, all these TPA-substituted BODIPYs (BTs) showed remarkable AIE performance and possessed high molar extinction absorption (up to ∼ 63000 M^-1 cm^-1), two-photon absorption (up to 171 GM at 870 nm), and large Stokes shifts. The BODIPY with one TPA group (BT1 and FBT1) showed lipid droplets-specific localization while BODIPY with two and three TPA groups (BT2, BT3 and FBT2) preferred to enrich in lysosomes. These BODIPYs all have been successfully used in tracking the dynamic behaviors of lipid droplets or lysosomes in living cells. Furthermore, BT1 and FBT1 can quantitatively detect the overexpression of lipid droplets, and BT3 has been successfully used to observe lysosomes behaviors of lipophagy process in living cells. This work systematically studied the influence of the number and position of TPA units on the optical properties and AIE-activities of BODIPYs, which not only enriched the BODIPY-based AIE NIR probes for organelle-specific imaging in live cells, but also provided a practical strategy for the effective construction of organic dyes with NIR AIE activity.

Synthesis and Self-Aggregation of Chlorophyll-a Derivatives Possessing a Hydroxymethyl Group in the C20-Substituent with Ethynylene and/or Phenylene Linkers

Chlorophyll(Chl)-a derivatives containing some rigid linkers in the C20 substituents, which were inserted between a hydroxymethyl group and the chlorin π-skeleton, were synthesized and their self-aggregation abilities were investigated. Measurements of electronic absorption, circular dichroism and infrared absorption spectra revealed that the zinc complex of a Chl-a derivative bearing a (p-ethynyl)benzyl alcoholic moiety at the C20-position gave its J-aggregates in an aqueous micellar solution through the hydrogen and coordination bonding. These results exhibited the potential of Chl-a derivatives bearing a hydroxyl group in the C20 substituents as the model compounds for chlorosomal light-harvesting antennas.

J-aggregation strategy of organic dyes for near-infrared bioimaging and fluorescent image-guided phototherapy

With the continuous development of organic materials for optoelectronic devices and biological applications, J-aggregation has attracted a great deal of interest in both dye chemistry and supramolecular chemistry. Except for the characteristic red-shifted absorption and emission, such ordered head-to-tail stacked structures may be accompanied by special properties such as enhanced absorption, narrowed spectral bandwidth, improved photothermal and photodynamic properties, aggregation-induced emission enhancement (AIEE) phenomenon, and so forth. These excellent properties add great potential to J-aggregates for optical imaging and phototherapy in the near-infrared (NIR) region. Despite decades of development, the challenge of rationally designing the molecular structure to adjust intermolecular forces to induce J-aggregation of organic dyes remains significant. In this review, we discuss the formation of J-aggregates in terms of intermolecular interactions and summarize some recent studies on J-aggregation dyes for NIR imaging and phototherapy, to provide a clear direction and reference for designing J-aggregates of near-infrared organic dyes to better enable biological applications. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies Diagnostic Tools > In Vivo Nanodiagnostics and Imaging Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease.

Discovery of BODIPY J-aggregates with absorption maxima beyond 1200 nm for biophotonics

Organic dyes with absorption maxima in the second near-infrared window (NIR-II; 1000 to 1700 nm) are of great interest in biophotonics. However, because of the lack of appropriate molecular scaffolds, current research in this field is limited to cyanine dyes, and developing NIR-II-absorbing organic dyes for biophotonics remains an immense challenge. Here, we rationally designed an ethenylene-bridged BODIPY scaffold featuring excellent J-aggregation capabilities and revealed that the bridging ethylene unit is crucial for intermolecular J-coupling regulation. By integrating the electron-donating groups into the scaffold, we obtained a BODIPY dye, BisBDP2, with a J-aggregate absorption maximum of around 1300 nm. BisBDP2 J-aggregates show excellent photothermal performance, including intense photoacoustic response, and a high photothermal conversion efficiency value of 63%. In vivo results demonstrate the potential of J-aggregates for photoacoustic imaging and photothermal ablation of deep-seated tumors. This study will speed up the exploration of NIR-II-absorbing J-aggregates for future biophotonic applications.

Clinical big-data-based design of GLUT2-targeted carbon nanodots for accurate diagnosis of hepatocellular carcinoma

Despite advances in diagnostic and therapeutic methods, the prognosis of patients with hepatocellular carcinoma (HCC) remains poor due to the delay in diagnosis. Herein, we aimed to discover a highly sensitive and specific biomarker for HCC based on genomic big data analysis and create an HCC-targeted imaging probe using carbon nanodots (CNDs) as contrast agents. In genomic analysis, we selected glucose transporter 2 (GLUT2) as a potential imaging target for HCC. We confirmed the target suitability by immunohisto-chemistry tests of 339 patient samples, where 81.1% of the patients exhibited underexpression of GLUT2, i.e., higher GLUT2 intensity in non-tumor tissues than in tumor tissues. To visualize GLUT2, we conjugated CNDs with glucosamine (GLN) as a targeting ligand to yield glucosamine-labeled CNDs (GLN-CNDs). A series of in vitro and in vivo experiments were conducted on GLUT2-modified HepG2 cells to confirm the specificity of the GLN-CNDs. Since the GLUT2 expression is higher in hepatocytes than in HCC cells, the GLUT2-targeted contrast agent is highly attached to normal cells. However, it is possible to produce images in the same form as the images obtained with a cancer cell-targeted contrast agent by inverting color scaling. Our results indicate that GLUT2 is a promising target for HCC and that GLN-CNDs may potentially be used as targeted imaging probes for diagnosing HCC.

Fluorescent Multifunctional Organic Nanoparticles for Drug Delivery and Bioimaging: A Tutorial Review

Fluorescent organic nanoparticles (FONs) are a large family of nanostructures constituted by organic components that emit light in different spectral regions upon excitation, due to the presence of organic fluorophores. FONs are of great interest for numerous biological and medical applications, due to their high tunability in terms of composition, morphology, surface functionalization, and optical properties. Multifunctional FONs combine several functionalities in a single nanostructure (emission of light, carriers for drug-delivery, functionalization with targeting ligands, etc.), opening the possibility of using the same nanoparticle for diagnosis and therapy. The preparation, characterization, and application of these multifunctional FONs require a multidisciplinary approach. In this review, we present FONs following a tutorial approach, with the aim of providing a general overview of the different aspects of the design, preparation, and characterization of FONs. The review encompasses the most common FONs developed to date, the description of the most important features of fluorophores that determine the optical properties of FONs, an overview of the preparation methods and of the optical characterization techniques, and the description of the theoretical approaches that are currently adopted for modeling FONs. The last part of the review is devoted to a non-exhaustive selection of some recent biomedical applications of FONs.

A J-aggregated nanoporphyrin overcoming phototoxic side effects in superior phototherapy with two-pronged effects

Phototherapy has been a promising therapeutic modality for pathological tissue due to its spatiotemporal selectivity and non-invasive characteristics. However, as a core component of phototherapy, a single photosensitizer (PS) nanoplatform integrating excellent therapeutic efficiency and minimal side effects remains an urgent but unmet need. Here, we construct a J-aggregated nano-porphyrin termed MTE based on the self-assembly of methyl-pheophorbide a derivative MPa-TEG (MT) and natural polyphenolic compound epigallocatechin gallate (EGCG). Due to the synergistic interaction between similar large π-conjugated structural EGCG and MT, MTE with small and uniform size is obtained by effectively hindering Ostwald ripening of MT. Noteworthily, MTE not only effectively avoids the inadvertent side effects of phototoxicity during transport thank to the ability of reactive oxygen species (ROS) scavenging, but also achieves two-pathway augmented superior phototherapy: (1) enhancing photodynamic therapy (PDT) via inhibiting the expression of anti-apoptosis protein surviving; (2) achieving adjuvant mild-temperature laser interstitial thermal therapy (LITT) via reducing the tumor thermoresistance on account that MTE inhibits the overexpression of HSP 70 and HSP 90. This research not only offers a facile strategy to construct multicomponent nanoplatforms but also provides a new pathway for efficient and low-toxicity phototherapy, which is beneficial to the future clinical application.

D-A Type NIR-II Organic Molecules: Strategies for the Enhancement Fluorescence Brightness and Applications in NIR-II Fluorescence Imaging-Navigated Photothermal Therapy

NIR-II fluorescence imaging (NIR-II FI) and photothermal therapy (PTT) have received broad attentions in precise tumor diagnosis and effective treatment attributed to high-resolution and deep tissue imaging, negligible invasivity, and high-efficiency treatment. Although many fluorescent molecules have been designed and conducted for NIR-II FI and PTT, it is still an enormous challenge for researchers to pioneer some rational design guidelines to improve fluorescence brightness. Organic D-A-type molecules, including small molecules and conjugated polymers, can be designed and developed to improve fluorescence brightness due to their tunable and easy functionalized chemical structures, allowing molecules tailored photophysical properties. In this review, some approaches to the development and design strategies of D-A type small molecules and conjugated polymers for the enhancement of fluorescence brightness are systemically introduced. Meanwhile, some applications of PTT and PTT-based combination therapy (such as PDT, chemotherapy, or gas therapy) assisted by NIR-II FI-based single or multiimaging technologies are classified and represented in detail as well. Finally, the current issues and challenges of NIR-II organic molecules in NIR-II FI-navigated PTT are summarized and discussed, which gives some guidelines for the future development direction of NIR-II organic molecules for NIR-II FI-navigated PTT.

A photo-responsive fluorescent amphiphile for target-specific and image-guided drug delivery applications

Multifunctional drug delivery systems are the centerpiece of effective chemotherapeutic strategies. Herein, we report the synthesis of an acetazolamide-linked cyanine-3-based NIR-responsive fluorescent macrocyclic amphiphile that self-assembled into spherical nanostructures in the aqueous medium via a J-aggregation pattern. The amphiphile shows various favorable properties of lipids. The photocleavage of the strained dioxacycloundecine ring induces spherical to nanotubular self-assembly with concomitant release of an encapsulated anticancer drug, doxorubicin (Dox), in a controlled manner. The CA-IX targeted amphiphile also showed lower cytotoxicity, effective cellular uptake, and Dox delivery to the model carcinoma cells.

Nitric-Oxide-Releasing aza-BODIPY: A New Near-Infrared J-Aggregate with Multiple Antibacterial Modalities

The development of near-infrared (NIR) J-aggregates has received increasing attention due to their broad applications. Here, we report the nitrosation of an amine-containing aza-BODIPY precursor (BDP-NH₂ ), affording the first nitric oxide (NO)-releasing NIR J-aggregate (BDP-NO). The introduction of N-nitrosamine moieties efficiently inhibits the aromatic interactions of BDP-NH₂ , which instead promotes the formation of J-aggregates within micellar nanoparticles with a remarkable bathochromic shift of ≈109 nm to the NIR window (820 nm). Interestingly, the NO release and photothermal conversion efficiency (PTCE) can be delicately tuned by the loading contents of BDP-NO within micellar nanoparticles, thereby enabling multiple antibacterial modalities by exploring either NO release, photothermal therapy (PTT), or both. We demonstrate the combination of NO and PTT can elevate antibacterial activity while attenuating PTT-associated inflammation for the in vivo treatment of MRSA infection.

Spanning BODIPY fluorescence with self-assembled micellar clusters

BODIPY dyes possess favorable optical properties for a variety of applications including in vivo and in vitro diagnostics. However, their utilization might be limited by their water insolubility and incompatibility with chemical modifications, resulting in low aggregation stability. Here, we outline the route for addressing this issue. We have demonstrated two approaches, based on dye entrapment in micellar coordination clusters (MCCs); this provides a general solution for water solubility as well as aggregation stability of the seven BODIPY derivatives. These derivatives have various bulky aromatic substituents in the 2,3,5,6- and meso-positions and can rotate relative to a dipyrrin core, which also provides molecular rotor properties. The molecular structural features and the presence of aromatic groups allows BODIPY dyes to be used as "supporting molecules", thus promoting micelle-micelle interaction and micellar network stabilization. In the second approach, self-micellization, following BODIPY use, leads to MCC formation without the use of any mediators, including chelators and/or metal ions. In both approaches, BODIPY exhibits an excellent optical response, at a concentration beyond its solubilization limit in aqueous media and without undesired crystallization. The suggested approaches represent systems used to encapsulate BODIPY in a capsule-based surfactant environment, enabling one to track the aggregation of BODIPY; these approaches represent an alternative system to study and apply BODIPY's molecular rotor properties. The stabilized compounds, i.e., the BODIPY-loaded MCCs, provide a unique feature of permeability to hydrophilic ligand-switching proteins such as BSA; they exhibit a bright "turn-on" fluorescence signal within the clusters via macromolecular complexation, thus expanding the possibilities of water-soluble BODIPY-loaded MCCs utilization for functional indicators.

Engineering BODIPY-based near-infrared nanoparticles with large Stokes shifts and aggregation-induced emission characteristics for organelle specific bioimaging

Lipid droplets (LDs) and lysosomes, as two important subcellular organelles, play specific and indispensable roles in various cellular processes. The development of efficient LD- and lysosome-specific fluorescent bio-probes is of great importance. However, current commercial lipid droplet- (LD) and lysosome-specific fluorescent specific bio-probes often suffer from the aggregation-caused quenching (ACQ) effect, short absorption and emission wavelengths, poor photostability and low specificity. Herein, a typical ACQ luminogen BODIPY was directly conjugated to strong electron donating triarylamine units at its α-positions, giving near-infrared (NIR) fluorescent materials TPAB and 2TPAB with aggregation-induced emission (AIE). Both TPAB and 2TPAB nanoparticles were obtained by self-assembly, and showed NIR emissions, large Stokes shifts, good photostability and two-photon absorption. These nanoparticles presented remarkable bioimaging performances and were shown to specifically localize in LDs or lysosomes, respectively, depending on the number of triarylamine units attached. They have been successfully used to detect endogenous LD overproduction, and monitor abnormal activities of LDs/lysosomes, as well as real-time track the lipophagy process in cells. Their far NIR emission and two-photon excitation further supported their promising bioimaging application for lipid droplet tracking in liver tissue and live zebrafish larvae. Our work here enriches BODIPY based NIR AIE dyes and provides organelle specific bio-probes which are superior to currently used commercial ones.

An aza-BODIPY-based NIR-II luminogen enables efficient phototheranostics

The fabrication of a high-performance second near-infrared (NIR-II) biological window fluorophore is in urgent need for precise diagnosis and treatment of cancer. Nevertheless, the construction of phototherapeutic agents in the NIR-II region with excellent imaging performance and minimal side effects remains a big challenge due to the limited availability of core fluorophore candidates. In this study, a new NIR-II fluorescent probe, CB1, which is an aza-BODIPY core conjugated with bulky donors, was designed and synthesized. CB1 was further encapsulated in DSPE-PEG2000 to impart water solubility, which shows brighter NIR-II fluorescence and higher photostability than the clinically used indocyanine green (ICG). CB1 nanoparticles show deep tissue penetration and high imaging contrast in vivo. In addition, molecular conformation enables CB1 nanoparticles to exhibit good photothermal properties. Both in vitro and in vivo assessments confirm that CB1 nanoparticles could be utilized as distinguished theranostic agents for NIR-II fluorescence imaging and tumor growth inhibition with negligible side effects. Collectively, this work provides a promising approach for constructing a new platform for cancer diagnosis and therapy.

Small-Molecule Photoacoustic Imaging Probe with Aggregation-Enhanced Amplitude for Real-Time Visualization of Acute Kidney Injury

Acute kidney injury (AKI) has become a growing issue for patients with the extensive use of all kinds of drugs in clinic. Photoacoustic (PA) imaging provides a noninvasive and real-time imaging method for studying kidney injury, but it has inherent shortages in terms of high background signal and low detection sensitivity for exogenous imaging agents. Intriguingly, J-aggregation offers to tune the optical properties of the dyes, thus providing a platform for developing new PA probes with desired performance. In this study, a small-molecule PA probe (BDP-3) was designed and synthesized. We serendipitously discovered that BDP-3 can transform into renal clearable nanoaggregates under physiological conditions. The hydrodynamic diameter of the BDP-3 increased from 0.64 ± 0.11 to 3.74 ± 0.39 nm when the content of H₂O increased from 40 to 90%. In addition, it was surprising that such a transforming process can significantly enhance its PA amplitude (2.06-fold). On this basis, PA imaging with BDP-3 was applied as a new method for the noninvasive detection of AKI induced by anticancer drugs, traditional Chinese medicine, and clinical contrast agents in animal models and exhibited higher sensitivity than the conventional serum index test, demonstrating great potential for further clinical diagnostic applications.

Electron Donor-Acceptor Interface of TPPS/PDI Boosting Charge Transfer for Efficient Photocatalytic Hydrogen Evolution

Charge separation efficiency of photocatalysts is still the key scientific issue for solar-to-chemical energy conversion. In this work, an electron donor-acceptor (D-A) interface with high charge separation between TPPS (tetra(4-sulfonatophenyl)porphyrin) and PDI (perylene diimide) is successfully constructed for boosting photocatalytic H2 evolution. The TPPS/PDI with D-A interface shows excellent photocatalytic H2 evolution rate of 546.54 µmol h-1 (30.36 mmol h-1 g-1 ), which is 9.95 and 9.41 times higher than that of pure TPPS and PDI, respectively. The TPPS/PDI has a markedly stronger internal electric field, which is respectively 3.76 and 3.01 times higher than that of pure PDI and TPPS. The D-A interface with giant internal electric field efficiently facilitates charge separation and urges TPPS/PDI to have a longer excited state lifetime than single component. The work provides entirely new ideas for designing materials with D-A interface to realize high photocatalytic activity.

Galactose conjugated boron dipyrromethene and hydrogen bonding promoted J-aggregates for efficiently targeted NIR-II fluorescence assistant photothermal therapy

It is essential to develop novel multifunctional and easily synthesized stable NIR-II fluorescent probes to guide photothermal therapy for tumors. Here, we propose a new strategy to construct boron dipyrromethene (BODIPY) J-aggregates by intermolecular hydrogen bonding (H-bond) and π-π stacking interactions to achieve fluorescence emission in the second near-infrared window (NIR-II, 1000-1700 nm). A novel meso-benzamide galactose hexanoate-BODIPY (Gal-OH-BDP) amphiphilic small molecular dye was synthesized and it formed nanoparticles spontaneously in aqueous solution with a maximum emission wavelength near 1060 nm, which works as a smart nanomedicine for targeting NIR-II imaging-guided photothermal therapy (PTT) of hepatocellular carcinoma. Galactose not only provided hydrogen bonds to regulate the aggregation pattern of the molecules but also effectively targeted hepatocellular carcinoma cells and promoted the formation of well-dispersed nanoparticles of dye molecules due to their hydrophilicity. Moreover, due to high photothermal conversion efficiency (PCE = 55%), Gal-OH-BDP NPs achieve galactose-targeted NIR-II imaging and PTT, which is important for the precise diagnosis and treatment of tumors (Scheme 1). In the present research work, H-bond was introduced for the first time into BODIPY for building J-aggregates to achieve the NIR-II fluorescence.

Metal-ligand Interactions and Oligo(p-Phenylene Vinylene) Derivatives Based Supramolecular Polymer Possessing Variable Fluorescence Colors

Fluorescent supramolecular polymers combine the benefits of supramolecular polymers in terms of dynamic nature with the optoelectronic features of incorporated fluorophores. However, the majority of fluorescent supramolecular polymers can only exhibit a single fluorescent state, restricting their applications. Incorporating J-type dyes into supramolecular monomers is expected to impart supramolecular polymers with variable fluorescence colors, because the aggregation mode of J-type dyes is closely related to the formation of supramolecular polymers. Herein, we report a supramolecular polymer [M1·Zn(OTf)₂ ]_n , in which the monomer M1 contains a J-type dye, oligo(p-phenylene vinylene) (OPV) derivative, and two terpyridine ends. The M1 + Zn(OTf)₂ solutions exhibit fluorescence color changes varying from cyan to yellow-green in the monomer concentration ranging from 0.04 to 1.00 mM. Moreover, based on the outputs from laser scanning confocal microscopy (LSCM), the fluorescence color transition during the formation of supramolecular polymers is intuitively proven. Additionally, considering the close relationship between the supramolecular polymer structure and the fluorescence color, the fluorescence color can be regulated by introducing tetraethylammonium hydroxide (TBAOH) that can bind with Zn²⁺ competitively to break up the structure of the supramolecular polymer. This article is protected by copyright. All rights reserved.

Femtosecond Spectroscopy and Nonlinear Optical Properties of aza-BODIPY Derivatives in Solution

The fast relaxation processes in the excited electronic states of functionalized aza-boron-dipyrromethene (aza-BODIPY) derivatives (1-4) were investigated in liquid media at room temperature, including the linear photophysical, photochemical, and nonlinear optical (NLO) properties. Optical gain was revealed for nonfluorescent derivatives 3 and 4 in the near infrared (NIR) spectral range under femtosecond excitation. The values of two-photon absorption (2PA) and excited-state absorption (ESA) cross-sections were obtained for 1-4 in dichloromethane using femtosecond Z-scans, and the role of bromine substituents in the molecular structures of 2 and 4 is discussed. The nature of the excited states involved in electronic transitions of these dyes was investigated using quantum-chemical TD-DFT calculations, and the obtained spectral parameters are in reasonable agreement with the experimental data. Significant 2PA (maxima cross-sections ∼2000 GM), and large ESA cross-sections ∼10^-20  m² of these new aza-BODIPY derivatives 1-4 along with their measured high photostability reveal their potential for photonic applications in general and optical limiting in particular.

Chemical Design of Activatable Photoacoustic Probes for Precise Biomedical Applications

Photoacoustic (PA) imaging technology, a three-dimensional hybrid imaging modality that integrates the advantage of optical and acoustic imaging, has great application prospects in molecular imaging due to its high imaging depth and resolution. To endow PA imaging with the ability for real-time molecular visualization and precise biomedical diagnosis, numerous activatable molecular PA probes which can specifically alter their PA intensities upon reacting with the targets or biological events of interest have been developed. This review highlights the recent developments of activatable PA probes for precise biomedical applications including molecular detection of the biotargets and imaging of the biological events. First, the generation mechanism of PA signals will be given, followed by a brief introduction to contrast agents used for PA probe design. Then we will particularly summarize the general design principles for the alteration of PA signals and activatable strategies for developing precise PA probes. Furthermore, we will give a detailed discussion of activatable PA probes in molecular detection and biomedical imaging applications in living systems. At last, the current challenges and outlooks of future PA probes will be discussed. We hope that this review will stimulate new ideas to explore the potentials of activatable PA probes for precise biomedical applications in the future.

A Facile, Protein-Derived Supramolecular Theranostic Strategy for Multimodal-Imaging-Guided Photodynamic and Photothermal Immunotherapy In Vivo

Theranostic systems that permit both diagnosis and treatment in vivo are highly appealing means by which to meet the demands of precision medicine. However, most such systems remain subject to issues related to complex molecular design and synthesis, potential toxicity, and possible photoactivity changes. Herein, a novel supramolecular theranostic strategy involving biomarker protein activation (BPA) and a host-guest strategy is proposed. To exemplify BPA, a facile "one-for-all" nanotheranostic agent for both albumin detection and cancer treatment is demonstrated, which utilizes a nanoparticulate heavy-atom-free BODIPY dye derivative (B4 NPs). The fluorescence and photoactivity of BODIPY dyes are completely suppressed by aggregation-induced self-quenching in the nanoparticulate state. However, a Balb/c nude mouse model is used to confirm that following the disassembly of injected B4 NPs, BODIPY specifically binds albumin in vivo, accompanied by significantly enhanced biocompatibility and photothermal conversion efficiency. More importantly, this supramolecular host-guest BPA strategy enables the resultant nanoplatform to act as a facile and efficient strategy for photodynamic and photothermal immunotherapy.

Diradical-Featured Organic Small-Molecule Photothermal Material with High-Spin State in Dimers for Ultra-Broadband Solar Energy Harvesting

Organic materials with radical characteristics are gaining increasing attention, due to their potential implications in highly efficient utilization of solar energy. Manipulating intermolecular interactions is crucial for tuning radical properties, as well as regulating their absorption bands, and thus improving the photothermal conversion efficiency. Herein, a diradical-featured organic small-molecule croconium derivative, CR-DPA-T, is reported for highly efficient utilization of solar energy. Upon aggregation, CR-DPA-T exists in dimer form, stabilized by the strong intermolecular π-π interactions, and exhibits a rarely reported high-spin state. Benefiting from the synergic effects of radical characteristics and strong intermolecular π-π interactions, CR-DPA-T powder absorbs broadly from 300 to 2000 nm. In-depth investigations with transient absorption analysis reveal that the strong intermolecular π-π interactions can promote nonradiative relaxation by accelerating internal conversion and facilitating intermolecular charge transfer (ICT) between dimeric molecules to open up faster internal conversion pathways. Remarkably, CR-DPA-T powder demonstrates a high photothermal efficiency of 79.5% under 808 nm laser irradiation. By employing CR-DPA-T as a solar harvester, a CR-DPA-T-loaded flexible self-healing poly(dimethylsiloxane) (H-PDMS) film, named as H-PDMS/CR-DPA-T self-healing film, is fabricated and employed for solar-thermal applications. These findings provide a feasible guideline for developing highly efficient diradical-featured organic photothermal materials.

BODIPY Conjugates as Functional Compounds for Medical Diagnostics and Treatment

Fluorescent dyes absorbing and emitting in the visible and near-IR regions are promising for the development of fluorescent probes for labeling and bio-visualization of body cells. The ability to absorb and emit in the long-wavelength region increases the efficiency of recording the spectral signals of the probes due to the higher permeability of the skin layers. Compared to other fluorescent dyes, BODIPYs are attractive due to their excellent photophysical properties-narrow absorption and emission, intense fluorescence, simple signal modulation for the practical applications. As part of conjugates with biomolecules, BODIPY could act as a biomarker, but as therapeutic agent, which allows solving several problems at once-labeling or bioimaging and treatment based on the suppression of pathogenic microflora and cancer cells, which provides a huge potential for practical application of BODIPY conjugates in medicine. The review is devoted to the discussion of the recent, promising directions of BODIPY application in the field of conjugation with biomolecules. The first direction is associated with the development of BODIPY conjugates with drugs, including compounds of platinum, paclitaxel, chlorambucil, isoxazole, capsaicin, etc. The second direction is devoted to the labeling of vitamins, hormones, lipids, and other biomolecules to control the processes of their transport, localization in target cells, and metabolism. Within the framework of the third direction, the problem of obtaining functional optically active materials by conjugating BODIPY with other colored and fluorescent particles, in particular, phthalocyanines, is being solved.