Switching the Photoluminescence and Electrochemiluminescence of Liposoluble Porphyrin in Aqueous Phase by Molecular Regulation

Electrochemiluminescence biosensor for the thyroid cancer biomarker miRNA-146b-5p detection using Zr-based metal-organic framework

Cancer cell-derived exosomes serve as crucial biomarkers for thyroid cancer, which has emerged as the fourth most prevalent malignancy among urban Chinese women. However, achieving high sensitivity and precision in their in vitro detection remains challenging. Traditional diagnostic methods for thyroid cancer, including tumor-associated marker detection and imaging examinations, are limited by high costs and poor sensitivity. Among various biomarkers, miRNA-146b-5p has been identified as a key marker associated with the progression of thyroid cancer, which poses a formidable challenge in achieving exquisite sensitivity and precision in vitro detection. Herein, we developed an electrochemiluminescence (ECL) biosensor for the sensitive detection of the thyroid cancer marker miRNA-146b-5p, based on Zr-PTC and combining an ECL resonance energy transfer (ECL-RET) system with a toehold-mediated strand displacement reaction (TSDR) signal amplification strategy. Initially, Zr-PTC was employed as the ECL signal label, with miRNA-146b-5p as the model target to initiate the TSDR cycle, resulting in the release of the output chain (output). The output chain assisted the unfolding of hairpin DNA H1 (H1), which exposed its complementary sequence that hybridizes with the ECL quenching material (AgCl NPs-S1), thereby resulting in a significant reduction of the ECL signal. The combination of target cyclic amplification and metal-organic framework-based signal labeling significantly enhanced the sensitivity of the proposed biosensor, achieving limit of detection (LOD) for miRNA-146b-5p as low as 0.69 fM (S/N = 3). This innovative analytical methodology presents a promising strategy for detecting exosomal RNA biomarkers associated with thyroid malignancies. The integration of RET system with TSDR signal amplification not only enhanced detection sensitivity but also demonstrated robust reproducibility and stability, offering broad applicability for sensitive nucleic acid detection in human serum samples.

Water-compatible electrogenerated chemiluminescence effect derived from readily accessible tripyridinium salts

Considering that numerous studies have shown pyridinium salts can be reduced electrochemically to form cationic radicals, we wonder whether these cationic radicals can further react with co-reactants to create excited-state species that display electrogenerated chemiluminescence (ECL). Herein, four tripyridinium salts were synthesized using a simple method, achieving relatively high yields of over 87%. Optical and electrochemical analyses revealed that these tripyridinium salts, which feature a large conjugated system, demonstrated notable electrochemical and photoluminescent properties. Most importantly, when paired with potassium persulfate as a co-reactant, distinct ECL behavior was observed even in water, with emissions detected at around 478 nm. The maximum ECL efficiency (ΦECL) of the synthesized salts, using Ru(bpy)32+ as a reference, was found to be 10.2%. Furthermore, we conducted a detailed investigation into the luminous mechanism behind ECL generation from the tripyridinium salts.

Efficient Al-H3NTB-MOG ECL Emitter with Self-Enhanced and AIECL Performance for Ultrasensitive Sensing of miRNA-141 Combined with a Y-Shaped Multiregion Dual-Drive DNA Walker

In this work, using Al-H3NTB-MOG with self-enhanced and aggregation-induced electrochemiluminescence (AIECL) performance as an efficient emitter, a biosensor based on a Y-shaped multiregion dual-drive DNA walker was constructed for the sensitive detection of miRNA-141. Notably, 4,4',4″-nitrilotribenzoic acid (H3NTB) was selected as the luminescent ligand with self-enhanced ECL property as the co-reactive tertiary amine in its structure. Al3+ served as a central ion to coordinate with H3NTB to form a three-dimensional porous gel structure, which restricted internal rotation and vibration of the benzene molecules and exhibited an excellent AIECL property. More interestingly, N-2-hydroxyethylpiperazine-N'-ethane-sulfonic acid (HEPES) was chosen as the system buffer, which could not only stabilize the test environment but also play a co-reaction compensation role to compensate for the consumption of the co-reactive groups in the ECL process, then significantly resulting in better stability of ECL response. Besides, an efficient dynamic signal amplification system was established based on the synergistic effect of rolling cycle amplification (RCA) process and ionic cleavage at both ends of the Y-shaped DNA nanostructure assembled by the catalytic hairpin self-assembly (CHA) reaction. Specifically, two long DNA chains with abundant recognition regions were formed by the RCA reaction as a dual-drive DNA walker, which could simultaneously walk along the predesigned tracks and shear the specific sites from two directions, effectively improving the signal amplification efficiency. In that way, the constructed biosensor realized the detection of miRNA-141 from 10 aM to 1 nM range with a detection limit as low as 6.48 aM.

Boron Ligands Boosting the Electrochemiluminescence Performance of Europium Metal-Organic Frameworks by Facilitating the Electronic Bridging

For optimal energy transfer in self-luminous lanthanide metal-organic frameworks (Ln-MOFs), the energy of the lowest triplet excited state must align with ideal energy levels. Failure to meet this condition can lead to reverse energy transfer, reducing luminous efficiency. In this study, we developed a mixed-ligand MOF, Eu-TCPP-BOP, which exists as an ECL self-enhancing luminophore. We used SPECM to study the role of boron ligands as a bridge for electron transport in improving the ECL performance of Eu-TCPP. The ligands H4TCPP and 5-BOP act as electron donor and shuttle, facilitating electron transport during the synthesis of Eu-TCPP-BOP and promoting energy transfer to the excited state of the acceptor Ln3+, thus enhancing overall energy transfer in Ln-MOF. The results indicate that the introduction of boron ligands enhances the ECL intensity of Eu-TCPP by a factor of 1.4 under voltage excitation. As an ECL sensing platform, it demonstrates high sensitivity and selectivity for the detection of catechol, with a concentration range of 1∼70 μM and a detection limit of 0.35 μM.

Porphyrin-Based Metal-Organic Frameworks for PD-L1 Detection via "Coordination Disaggregation-Induced Enhancement" Strategy

Porphyrins, known for their exceptional photoelectrochemical properties and high luminescence, are promising candidates for electrochemiluminescence (ECL) applications. However, their tendency to aggregate in aqueous solutions due to π-π stacking leads to luminescence quenching and reduced efficiency. To address this, we developed a "coordination disaggregation-induced enhancement" strategy, utilizing metal-organic frameworks (MOFs) as stable platforms for immobilizing porphyrin. These porphyrin-based MOFs not only increase the loading of luminescent groups and suppress the aggregation-caused quenching (ACQ) effect but also enhance electron transfer via uniform dispersion of pyrrole N in the porphyrin ligand, thereby improving ECL intensity. Additionally, they exhibit favorable biocompatibility and low toxicity, making them suitable for biomedical applications. By combining porphyrin-based MOFs as donors with PDA@MnO2 composites as quenchers, we constructed a quenching-type ECL immunosensor for detecting programmed death ligand 1 (PD-L1). This sensor achieves a detection range of 10 fg/mL to 100 ng/mL, with a limit of detection as low as 2.48 fg/mL, which demonstrates great potential for highly sensitive biomarker detection and promising applications in early cancer diagnosis and other medical diagnostics.

Quantum Dynamics of Charge Carriers in Fullerenes Encapsulated by Covalent Organic Polyhedra: Choice of Fullerene Matters

Charge separation is at the heart of solar energy applications, and efficient materials require fast photoinduced electron transfer (ET) and slow charge recombination (CR). Using time-dependent self-consistent charge density functional tight-binding theory combined with nonadiabatic (NA) molecular dynamics, we report a detailed analysis of ET and CR in hybrids composed of photoactive covalent organic polyhedra (COP) and encapsulated fullerenes. The ET occurs on a subpicosecond time scale and accelerates with increasing fullerene diameter, C60 to C70 to C84. As the fullerene size increases, the π-electron system available for interaction with the COP grows, the fullerene-COP separation decreases, and the number of fullerene states available to accept the photoexcited electron increases, accelerating the ET. In comparison, the CR occurs on a nanosecond time scale and correlates with the length of the fullerene shortest axis because the relevant fullerene state is polarized in that direction. The largest and least symmetrical C84 exhibits the fastest ET and the slowest CR, making COP@C84 the most promising hybrid. Both high-frequency bond stretching and bending vibrations and low-frequency breathing modes are involved in the ET and CR processes, with more modes present in the C84 system due its lower symmetry. The 10-20 fs vibrationally induced coherence loss in the electronic subsystem contributes to long lifetimes of the charge-separated states. The comprehensive investigation of the structure-property relationship of the charge carrier dynamics in the COP@fullerene hybrids provides a detailed atomistic understanding of interfacial ET processes and generates guidelines for rational design of high-performance materials for solar energy and related applications.

Polychromatic Electrochemiluminescence Imaging of Single Heteroligand Metal-Organic Crystals

Conventional polychromatic electrochemiluminescence (ECL) imaging is realized with the several separated luminophores at the different potentials. In this study, an emerging polychromatic ECL imaging system was constructed based on single heteroligand metal-organic framework (MOF) crystals as nanoemitters through an intrareticular energy transfer process. The heteroligand MOF crystals, named h-NJU-241, were coassembled of meso-tetrakis(4-carboxyphenyl)porphyrin (TCPP) with 1,3,6,8-tetrakis(p-benzoic acid)pyrene (TBAPy) ligand using benzoic acid catalyst with coordination ability, leading to the conjugated spacing of 0.624 nm between two ligands. Remarkably, an energy transfer efficiency of 92.2% was achieved when the coordination weight ratio of TCPP acceptor and TBAPy donor was only 1.87‰. Different from monoligand MOFs, the heteroligand h-NJU-241 exhibits dual ECL emissions in both blue and red regions at one step applied potential, which is first example of polychromatic ECL imaging for single MOF crystals. Furthermore, by adjusting the reaction conditions, the morphology distribution of porphyrin within the crystal can be dynamically controlled, providing a tailored crystal platform for decoding fundamentals in polychromatic ECL imaging.

NIR-activated multifunctional agents for the combined application in cancer imaging and therapy

Anticancer therapies that combine both diagnostic and therapeutic capabilities hold significant promise for enhancing treatment efficacy and patient outcomes. Among these, agents responsive to near-infrared (NIR) photons are of particular interest due to their negligible toxicity and multifunctionality. These compounds are not only effective in photodynamic therapy (PDT), but also serve as contrast agents in various imaging modalities, including fluorescence and photoacoustic imaging. In this review, we explore the photophysical and photochemical properties of NIR-activated porphyrin, cyanine, and phthalocyanines derivatives as well as aggregation-induced emission compounds, highlighting their application in synergistic detection, diagnosis, and therapy. Special attention is given to the design and optimization of these agents to achieve high photostability, efficient NIR absorption, and significant yields of fluorescence, heat, or reactive oxygen species (ROS) generation depending on the application. Additionally, we discuss the incorporation of these compounds into nanocarriers to enhance their solubility, stability, and target specificity. Such nanoparticle-based systems exhibit improved pharmacokinetics and pharmacodynamics, facilitating more effective tumor targeting and broadening the application range to photoacoustic imaging and photothermal therapy. Furthermore, we summarize the application of these NIR-responsive agents in multimodal imaging techniques, which combine the advantages of fluorescence and photoacoustic imaging to provide comprehensive diagnostic information. Finally, we address the current challenges and limitations of photodiagnosis and phototherapy and highlight some critical barriers to their clinical implementation. These include issues related to their phototoxicity, limited tissue penetration, and potential off-target effects. The review concludes by highlighting future research directions aimed at overcoming these obstacles, with a focus on the development of next-generation agents and platforms that offer enhanced therapeutic efficacy and imaging capabilities in the field of cancer treatment.

Rapid release of high-valent silver ions from water-soluble porphyrin complexes to enhance the direct killing of Methicillin-Resistant Staphylococcus aureus

The emergence of multidrug-resistant (MDR) bacteria represented by MRSA (Methicillin-resistant Staphylococcus aureus) poses a great challenge to current anti-infection treatment. It is critical to develop efficient MRSA anti-bacteria drugs and explore simple therapeutic strategies with low MDR risk. Herein, we synthesized high-valent (AgII/AgIII) water-soluble porphyrins (cationic AgTMPyP and anionic AgTMPPS) and investigated their direct bactericidal property for MRSA without photoactivation in vitro and in vivo. The cationic porphyrin AgTMPyP exhibits well oxidase-like activity and has 100 % sterilizing rate at 8 μmol/L concentration. Besides, AgTMPyP can effectively destroy biofilms in vitro, mediate the polarization of macrophages from M1 to M2, and promote wound healing in vivo. Combined with DFT calculation, the related antibacterial mechanism is further discussed. High-valent silverporphyrins can maintain stable in water for at least 200 days. The moment they encounter MRSA, high-valent silver ions from AgTMPyP can be immediately released from the porphyrin ring and attack the MRSA with efficient sterilization. Together with the hemolysis, blood routine and blood biochemistry tests, it is proved that AgTMPyP can have great prospects in the direct treatment of bacterial infections in skin diseases in the future. STATEMENT OF SIGNIFICANCE: The emergence of multidrug-resistant (MDR) bacteria represented by MRSA poses a great challenge to current anti-infection treatment. It has become critical to develop efficient MRSA anti-bacteria drugs and explore simple therapeutic strategies with low MDR risk. We synthesized high-valent (AgII/AgIII) water-soluble silver porphyrins (AgTMPyP and AgTMPPS), which can be stable for long periods in aqueous solutions. AgTMPyP can directly and efficiently kill bacteria and destroy biofilms without photoactivation in vitro and in vivo. Combined with DFT calculation, the related antibacterial mechanism is further discussed. AgTMPyP is a superior antimicrobial agent with good biocompatibility and it can have great prospects in the direct treatment of bacterial infections and wound healing in the future.

Tetraphenylethene-Based Covalent Organic Polymers with Aggregation-Induced Electrochemiluminescence for Highly Sensitive Bacterial Biosensors

Tetraphenylethene (TPE), which usually serves as aggregation-induced emission and aggregation-induced electrochemiluminescence fluorophores, has been widely applied in fabricating fluorescent nanomaterials and biosensors. However, it is still a tremendous challenge to prepare well-controlled TPE aggregates with strong fluorescence (FL) and electrochemiluminescence (ECL). In this study, we constructed a bacterial ECL biosensing platform with high sensitivity based on TPE-based covalent organic polymer (COP) nanoparticles synthesized by a simple Menschutkin reaction strategy to employ bromide group-carrying molecules and 1,1,2,2-tetrakis(4-(pyridine-4-yl)phenyl)ethene as the cross-linking agent and the emissive moiety, respectively. The ECL Escherichia coli biosensor had high sensitivity, a low limit of detection (0.19 CFU mL-1), a wide linear range (1 × 102-5 × 106 CFU mL-1), and good selectivity. The excellent properties of the bacterial biosensor could be attributed to the uniform spherical COP nanoparticles with enhanced FL and ECL signals, the maximal ECL efficiency of which was 8.4-fold higher than that of the typical tris(bipyridine) ruthenium(II) emitter. The FL and ECL intensities of the TPE-based COP nanoparticles could be adjusted by varying bromide group-carrying molecules and thus regulating their energy gap between highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) orbitals. The TPE-based COP nanoparticles with strong FL and ECL intensities pave a promising avenue to construct highly sensitive bacterial ECL biosensors for the large-scale screening of disease-causing bacteria.

Hydrogen-Bond-Induced Melem Assemblies to Resist Aggregation-Caused Quenching for Ultrasensitive ECL Detection of COVID-19 Antigen

Nowadays, aggregation-caused quenching (ACQ) of organic molecules in aqueous media seriously restricts their analytical and biomedical applications. In this work, hydrogen bond (H-bond) was utilized to resist the ACQ effect of 2,5,8-triamino-1,3,4,6,7,9,9b-heptaazaphenalene (Melem) as an advanced electrochemiluminescence (ECL) luminophore, whose ECL process was carefully studied in an aqueous K2S2O8 system coupled with electron paramagnetic resonance (EPR) measurements. Notably, the H-bond-induced Melem assemblies (Melem-H) showed 16.6-fold enhancement in the ECL signals as compared to the Melem aggregates (Melem-A), combined by elaborating the enhanced mechanism. On such basis, the effective ECL signal transduction was in situ achieved through the specific recognition of the double-stranded DNA embedded in Melem-H assemblies (Me-dsDNA) with spike protein (SP) of coronavirus disease 2019 (COVID-19). For that, such an ECL biosensor showed a wider linear range (1.0-125.0 pg mL-1) with a lower limit of detection (LOD) down to 0.45 pg mL-1, which also displayed acceptable results in analysis of human nasal swab samples. Therefore, the work provides a distinctive insight on addressing the ACQ effect and broadening the application scope of the organic emitter and offers a simple platform for biomedical detection.

Hexagonal Prism-Shaped AIE-Active MOFs as Coreactant-Free Electrochemiluminescence Luminophores Coupled with Hollow Cu2-xO@Pd Heterostructures as Efficient Quenching Probes for Sensitive Biosensing

For most self-luminous metal-organic framework (MOF)-involved electrochemiluminescence (ECL) systems, the integration of exogenous coreactants is indispensable to promote ECL efficiency. However, the introduction of a coreactant into an electrolyte would result in poor stability, thereby inevitably affecting analytical accuracy. Herein, by employing aggregation-induced emission luminogens as ligands, we first synthesized one hexagonal prism-shaped MOF that displays robust and steady ECL signal without an exogenous coreactant. Furthermore, adenosine triphosphate (ATP), as the target analyte, can be fixed on the electrode surface directly owing to the strong coordination between Zr4+ and phosphate groups. According to the ECL resonance energy transfer effect, hollow Cu2-xO@Pd heterostructures are conveniently prepared and act as efficient quenching probes. Remarkably, the resultant urchin-like hollow structure could provide more active sites to anchor ATP aptamers, thus enhancing the ECL quenching efficiency. In this manner, an elaborate coreactant-free ECL system was developed to detect ATP, which demonstrates a remarkable detection limit of 0.17 nM, as well as excellent stability and reproducibility. The present work offers significant enlightenment for the further evolution of advanced ECL systems integrated with MOF-based luminophores.

C─H Activation Enables the Construction of New Bis-Polyaryl Phenylpyridine Ruthenium Complexes: Conjugation and Rigidity Synergistic Effect for Advanced Electrochemiluminescence

The access to bench-stable organometallic compounds unfolds new chemical space for medicinal and material sciences. In particular, stable organoruthenium compounds with constitutional and stereoisomeric forms for subtle regulation of electrochemiluminescence are intriguing and challenging. Here, coordination of polycyclic aromatic hydrocarbons on (2-phenylpyridine)2(CO)2Ru complex allows access to bis-polyaryl phenylpyridine (BPP) Ruthenium complex through C─H activation strategy and coupling reactions for installation of the functionalities with steric and electronic purposes. The photoluminescence and electrochemiluminescence of BPP Ru complexes are affected by the actual polycyclic aromatic hydrocarbons inherent properties. The anthracene derivatized BPP Ru complex (BPP-Ant) shows the best ECL performance and reveals an enormous ECL quantum efficiency of 1.6-fold higher than the golden standard Ru(bpy)3 2+. The unprecedentedly high efficiency is due to the best compromise between the structural conjugation and molecular rigidity from BPP-Ant providing a providential energy gap that facilitated the feasibility of electron transfer and favored the radiative energy release by experimentally and DFT calculations. Moreover, PL and spooling ECL spectroscopies are used to track and link multiple emission peaks of BPP-Ant at 445, 645, and 845 nm to different emissive species. These discoveries will add a new member to the efficient ECL ruthenium complex family and bring more potentials.

Intermolecular Assembly of Dual Hydrogen Bonding Regio-Isomers Generates High-Performance AIE Probes

Regio-isomers are utilized to design innovative AIE luminogens (AIEgens) by regulating molecular aggregation behavior. However, relevant examples are limited, and the underlying mechanism is not fully understood. Herein, a regio-isomer strategy is used to develop AIEgens by precisely regulating the intermolecular interactions in the solid state. Among the regio-isomers it is investigated, ortho- isomer (DCM-O3-O7) exhibits enhanced AIE-activity than the para- isomer (DCM-P6), and the size of the ortho- substituents is crucial for the AIE performance. The underlying mechanism of the strategy is revealed using DFT calculations and single-crystal analysis. Dual hydrogen bonds (C─H∙∙∙π and C─H∙∙∙N) are generated between the molecules, which contributes to form dimers, tetramers, and 1D supramolecular structures in the crystal. By restricting intramolecular motion and attenuating π-π interactions, solid-state fluorescence is significantly enhanced. This strategy's effectiveness is validated using other donor-acceptor fluorophores, with DCM-O6 and its analogues serving as efficient probes for bioimaging applications. Notably, DCM-OM, which bears a morpholinyl instead of piperidinyl group, displayed strong lysosome-targeting ability and photostability; DCM-OP, incorporated by the hydrophilic quaternary ammonium group, exhibited wash-free imaging and cell membrane-targeting capabilities; and DCM-O6 nanoparticles enabled high-fidelity in vivo tumor imaging. Therefore, this strategy affords a general method for designing bright AIEgens.

Ionic Covalent-Organic Frameworks Composed of Anthryl-Extended Viologen as a Kind of Electrochemiluminescence Luminophore

Nowadays, covalent-organic frameworks (COFs) integrated with the electrochemiluminescence (ECL) behavior are highly desired owing to the significant advantages including multifunctionality, high sensitivity, and low background noise. Here, two ionic COFs (iCOFs) consisting of the anthryl-extended viologen as the backbone were designed and synthesized via the Zincke reaction. It is found for the first time that the as-prepared iCOFs accompanied by potassium persulfate as the coreactant can provide a clear ECL response in a water-bearing medium. The maximum ECL emissions of the iCOFs were in agreement with the photoluminescence spectra. Besides, cyclic voltammetry and electron paramagnetic resonance measurements reveal that the pyridinium unit was electrochemically reduced to afford the free radical. Then, it reacted with SO4·- to generate the excited-state [iCOF]*. Finally, [iCOF]* quickly returned to its ground state coupled with a clear ECL emission, yielding a maximum ECL quantum efficiency of 23.4% compared with tris(2,2'-bipyridyl) ruthenium(II) as the benchmark. In brief, the current study opens a way to develop a kind of ECL emitter that holds great potential in sensing, imaging, and light-emitting devices.

Insight into the charge transfer behavior of an electrochemiluminescence sensor based on porphyrin-coumarin derivatives with a donor-acceptor configuration

The excellent photophysical and electrochemical properties of porphyrins have inspired widespread interest in the realm of electrochemiluminescence (ECL). The aggregation-caused deficiency of ECL emission in aqueous solution, however, still severely impedes further applications. Herein, a molecule with a donor-acceptor (D-A) configuration, ATPP-Cou, consisting of monoaminoporphyrin as an electron donor and coumarin as an electron acceptor, was designed as an ECL luminophore to address the susceptibility of the porphyrin to aggregation-caused quenching (ACQ) in aqueous solution. ATPP-Cou demonstrated a three-fold enhanced ECL signal compared to pristine ATPP. Despite the acknowledged significance of intramolecular charge transfer (ICT) in generating excited states in ECL, there is a lack of quantitative descriptions. Herein, intensity-modulated photocurrent spectroscopy (IMPS) and scanning photoelectrochemical microscopy (SPECM) were utilized to validate the influence of ICT on the enhancement performance of D-A type ECL molecules. Additionally, ATPP-Cou was also developed as a probe for the successful detection of Cu2+ in aqueous solution. The present study not only enriches the repertoire of efficient porphyrin-based ECL luminophores applicable in aqueous environments but also exemplifies the successful integration of novel measurement techniques to provide more comprehensive insights into the underlying mechanisms responsible for improved ECL performance.

Aggregation-Induced Enhanced Electrochemiluminescence Resonance Energy Transfer Biosensor for Ultrasensitive Detection of Carcinoembryonic Antigen Based on Donor-Acceptor Organic Nanoparticles

Aggregation-induced electrochemiluminescence (AIECL) combines the merits of aggregation-induced emission (AIE) and electrochemiluminescence (ECL), which has become a research hot spot in recent years. Therefore, we synthesized a novel AIE compound (Z)-3-(4-(2-butyl-1,3-dioxo-2,3-dihydro-1H-benzo[de]isoquinolin-6-yl)phenyl)-2-(4-(1,2,2-triphenylvinyl)phenyl)acrylonitrile (TPENI) with a donor-acceptor (D-A) structure, that is, a simple peripheral modification of 4-(2-butyl-1,3-dioxo-2,3-dihydro-1H-benzo[de]isoquinolin-6-yl) benzaldehyde (NI-CHO) with AIE-active tetraphenylethylene (TPE) to achieve the transition of NI-CHO from aggregation-caused quenching (ACQ) to an AIE molecule. When TPENI was in the aggregated state, the luminescence intensity was significantly enhanced due to the TPE structural unit restricting the free rotation of the intramolecular benzene ring, as well as the π-π stacking interactions of the molecules, which was conducive to the preparation of TPENI NPs as ECL materials. Satisfactorily, we found that the ECL intensity of TPENI NPs was increased by about 4.8-fold compared with that of the molecules dispersed in organic solution, and the stability reached about 1000 s. Based on the excellent ECL properties of TPENI NPs, an "on-off-on" ECL biosensor with a wider detection range (1 fg/mL to 100 ng/mL) and a lower detection limit of 0.20 fg/mL (S/N = 3) was proposed for sensitive analysis of a carcinoembryonic antigen (CEA). Overall, this work provided a new approach to the realization of AIECL and laid the foundation for the application of naphthalimide derivatives in ECL.

Aggregation-induced electrochemiluminescence based on intramolecular charge transfer and twisted molecular conformation for label-free Immunoassay

Organic emitters with exceptional properties exhibit significant potential in the field of aggregation-induced electrochemiluminescence (AIECL); however, their practicality is impeded by limited ECL efficiency (ΦECL). This paper investigates a novel type of AIECL emitter (BDPPA NPs), where an efficient intramolecular charge transfer (ICT) effect and highly twisted conformation contribute to a remarkable enhancement of ECL. The ICT effect reduces the electron transfer path, while the twisted conformation effectively restricts π-π stacking and intramolecular motions. Intriguingly, compared to the standard system of [Ru(bpy)32+]/TPrA, bright emissions with up to 54 % ΦECL were achieved, enabling direct visual observation of ECL through the co-reactant route. The label-free immunosensor exhibited distinguished performance in detecting SARS-CoV-2 N protein across an exceptionally wide linear range of 0.001-500 ng mL-1, with a remarkably low detection limit of 0.28 pg mL-1. Furthermore, this developed ECL platform exhibited excellent sensitivity, specificity, and stability characteristics, providing an efficient avenue for constructing platforms for bioanalysis and clinical diagnosis analysis.

An intense cathodic electrochemiluminescence from carbon-nanosheets in situ grown on glassy carbon electrode and application in immunoanalysis via biometallization strategy

An intense cathodic electrochemiluminescence (ECL) is reported from a polarized glassy carbon electrode (GCE) in peroxydisulfate solution. After the polarization in 1 M Na2SO4 at the potential of - 3.7 V for 3 s, carbon nanosheets (C-NSs) were in situ grown on the surface of the GCE. Measured in 100 mM K2S2O8 solution, the ECL intensity of the GCE/C-NSs is 112-fold that of a bare GCE. The ECL spectrum revealed that the true ECL luminophore in the GCE/C-NSs-peroxydisulfate system is O2/S2O82- which is promoted by C-NSs. When Cu2+ was electrochemically enriched and reduced to Cu(0) on the catalytic sites of C-NSs, the ECL from GCE/C-NSs/Cu in K2S2O8 solution was decreased with increasing logarithmic concentration of Cu2+ in the range from 10 pM to 1 μM, with a limit of detection (LOD) of 3 pM. An immunoanalysis method is proposed via a biometallization strategy using CuS nanoparticles as the tags and carcinoembryonic antigen (CEA) as the model analyte. After the immune recognition in the microplate, the CuS tags in the immunocomplex were dissolved and the resultant Cu2+ was electrochemically enriched and reduced on the catalytic sites of C-NSs, quenching the ECL intensity of GCE/C-NSs-O2/S2O82- system. The proposed ECL immunoanalysis method was used to quantify CEA in actual serum samples with an LOD of 1.0 fg mL-1, possessing the advantages of simple electrode modification, high sensitivity and good reproducibility.

Ultrasensitive Electrochemiluminescence Biosensing Platform Based on Polymer Dots with Aggregation-Induced Emission for Dual-Biotoxin Assay

Multitarget assay has always been a hot topic in electrochemiluminescence (ECL) methods. Herein, a "on-off-on" ECL aptasensor was developed for the ultrasensitive and sequential detection of possible biological warfare agents, deoxynivalenol (DON) and abrin (ABR). As a luminophore, polymer dots (Pdots) with aggregation-induced emission exhibit high ECL efficiency in the aptasensor, i.e., the signal "on" state. The DON assays mainly depend on ECL quenching due to the efficient quenching effect between ferrocene-H2-ferrocene (Fc-H2-Fc) and Pdots, i.e., the signal "off" state. When the aptasensor is incubated with the oligonucleotide sequence S2 to replace Fc-H2-Fc, obvious ECL recovery occurs, i.e., the signal "on" state, which can be used to sequentially detect ABR. The limit of detection (LOD) for DON is 0.73 fg·mL-1 in the range of 5.0 to 50 ng·mL-1; and the LOD for ABR is ∼0.38 pg·mL-1 in the range of 1.25 pg·mL-1 to 1.25 μg·mL-1. The as-designed ECL aptasensor exhibits good stability and reproducibility, high specificity, and favorable practicality. Therefore, this work provides a new approach for assays of DON and ABR in food safety and can be used as a model to design an ultrasensitive ECL biosensor for multitarget detection.

Noncovalent Interaction Guided Precise Photoluminescence Regulation of Gold Nanoclusters in Both Isolate Species and Aggregate States

Designing luminophores bright in both isolate species and aggregate states is of great importance in many emerging cutting-edge applications. However, the conventional luminophores either emit in isolate species but quench in aggregate state or emit in aggregate state but darken in isolate species. Here we demonstrate that the precise regulation of noncovalent interactions can realize luminophores bright in both isolate species and aggregate states. It is firstly discovered that the intra-cluster interaction enhances the emission of atomically precise Au25(pMBA)18 (pMBA=4-mercaptobenzoic acid), a nanoscale luminophore, while the inter-cluster interaction quenches the emission. The emission enhancing strategies are then well-designed by both introducing exogenous substances to block inter-cluster interaction and surface manipulation of Au25(pMBA)18 at the molecular level to enhance intra-cluster interaction, opening new possibilities to controllably enhance the luminophore's photoluminescence in both isolate species and aggregate states in different phases including aqueous solution, solid state and organic solvents.

Nanobody-Based Microfluidic Immunosensor Chip Using Tetraphenylethylene-Derived Covalent Organic Frameworks as Aggregation-Induced Electrochemiluminescence Emitters for the Detection of Thymic Stromal Lymphopoietin

In this letter, a sensitive microfluidic immunosensor chip was developed using tetrakis(4-aminophenyl)ethene (TPE)-derived covalent organic frameworks (T-COF) as aggregation-induced electrochemiluminescence (AIECL) emitters and nanobodies as efficient immune recognition units for the detection of thymic stromal lymphopoietin (TSLP), a novel target of asthma. The internal rotation and vibration of TPE molecules were constrained within the framework structure, forcing nonradiative relaxation to convert into pronounced radiative transitions. A camel-derived nanobody exhibited superior specificity, higher residual activity and epitope recognition postcuring compared to monoclonal antibodies. Benefiting from the affinity between silver ions (Ag+) and cytosine (C), a double-stranded DNA (dsDNA) embedded with Ag+ was modified onto the surface of TSLP. A positive correlation was obtained between the TSLP concentration (1.00 pg/mL to 4.00 ng/mL) and ECL intensity, as Ag+ was confirmed to be an excellent accelerator of the generation of free radical species. We propose that utilizing COF to constrain luminescent molecules and trigger the AIECL phenomenon is another promising method for preparing signal tags to detect low-abundance disease-related markers.

One-Dimensional Covalent Organic Framework with Improved Charge Transfer for Enhanced Electrochemiluminescence

We present a dimensional regulating charge transfer strategy to achieve an enhanced electrochemiluminescence (ECL) by constructing a one-dimensional pyrene-based covalent organic framework (1D-COF). The dual-chain-like edge architecture in 1D-COF facilitates the stabilization of aromatic backbones, the enhancement of electronic conjugations, and the decrease of energy loss. The 1D-COF generates enhanced anodic (92.5-fold) and cathodic (3.2-fold) signals with tripropylamine (TPrA) and K2S2O8 as the anodic and cathodic coreactants, respectively, compared with 2D-COF. The anodic and cathodic ECL efficiencies of 1D-COF are 2.08- and 3.08-fold higher than those of 2D-COF, respectively. According to density functional theory (DFT), the rotational barrier energy (ΔE) of 1D-COF enhances sharply with the increase of dihedral angle, suggesting that the architecture in 1D-COF restrains the intramolecular spin of aromatic chains, which facilitates the decrease of nonradiative transitions and the enhancement of ECL. Furthermore, 1D-COF can be used to construct an ECL biosensor for sensitive detection of dopamine.

A Novel Photosensitizer Based 450-nm Blue Laser-Mediated Photodynamic Therapy Induces Apoptosis in Colorectal Cancer - in Vitro and in Vivo Study

BACKGROUND

Due to its non-invasive and widely applicable features, photodynamic therapy (PDT) has been a prominent treatment approach against cancer in recent years. However, its widespread application in clinical practice is limited by the dark toxicity of photosensitizers and insufficient penetration of light sources. This study assessed the anticancer effects of a novel photosensitizer 5-(4-amino-phenyl)-10,15,20-triphenylporphyrin with diethylene-triaminopentaacetic acid (ATPP-DTPA)-mediated PDT (hereinafter referred to as ATPP-PDT) under the irradiation of a 450-nm blue laser on colorectal cancer (CRC) in vivo and in vitro.

METHODS

After 450-nm blue laser-mediated ATPP-PDT and the traditional photosensitizer 5-aminolevulinic acid (5-ALA)-PDT treatment, cell viability was detected through Cell Counting Kit-8 (CCK-8) and 5-ethynyl-2'-deoxyuridine (EdU) assays. Reactive oxygen species (ROS) generation was quantified by flow cytometry and fluorescence microscopy. Western blotting and transcriptome RNA sequencing and functional experiments were used to evaluate cell apoptosis and its potential mechanism. Anti-tumor experiment in vivo was performed in nude mice with subcutaneous tumors.

RESULTS

ATPP-DTPA had a marvelous absorption in the blue spectrum. Compared with 5-ALA, ATPP-DTPA could achieve significant killing effects at a lower dose. Owing to generating an excessive amount of ROS, 450-nm blue laser-mediated PDT based on ATPP-DTPA resulted in evident growth inhibition and apoptosis in CRC cells in vitro. After transcriptome RNA sequencing and functional experiments, p38 MAPK signaling pathway was confirmed to be involved in the regulation of apoptosis induced by 450-nm blue laser-mediated ATPP-PDT. Additionally, animal studies using xenograft model confirmed that ATPP-PDT had excellent anti-tumor effect and reasonable biosafety in vivo.

CONCLUSIONS

PDT mediated by 450-nm blue laser combined with ATPP-DTPA may be a novel and effective method for the treatment of CRC.

Synthesis of silica-encapsulated tetraphenylethylene with aggregation-induced electrochemiluminescence resonance energy transfer for sensitively sensing microcystin-LR

The reported organic electrochemiluminescence (ECL) luminophors for the detection of various markers often suffer from intermolecular π-π stacking-induced luminophore quenching. Herein, we demonstrate one-pot synthesis of a new aggregation-induced electrochemiluminescence (AIECL) emitter (i.e., TPE@SiO2/rGO composite) for sensitive measurement of microcystin-leucine arginine (MC-LR). The TPE@SiO2/rGO composite is constructed by embedding the silica-encapsuled 1,1,2,2-tetra(4-carboxylphenyl)ethylene (TPE) in the reduced graphene oxide. In comparison with the monomer TPE, this composite exhibit high luminescence efficiency and strong ECL emission, because the AIECL phenomenon triggered by the spatial confinement effect in the SiO2 cage induces the restriction of the internal motion and vibration of molecules. Notably, this composite has distinct advantages of easy preparation, simple functionalization, and stable luminescence. Especially, the TPE@SiO2/rGO-based ECL-RET system exhibits a high quenching efficiency (ΦET) of 69.7%. When target MC-LR is present, it triggers DNA strand displacement reaction (SDR), inducing the quenching of the ECL signal of TPE@SiO2/rGO composite due to ECL resonance energy transfer between TPE@SiO2/rGO composite and methylene blue (MB). The proposed biosensor enables highly sensitive, low-cost, and robust measurement of MC-LR with a large dynamic range of 7 orders of magnitude and a detection limit of 3.78 fg/mL, and it displays excellent detection performance in complex biological matrices, holding potential applications in food safety and water monitoring.

Porous Complex-Mediated Dual Emission of Porphyrins for the Electrochemiluminescence Bioassay

Although porphyrins make up a promising class of electrochemiluminescence (ECL) luminophors, their aggregation-caused quenching (ACQ) characteristics lead to inferior ECL efficiency (ΦECL). Furthermore, current application of porphyrins is limited to cathodic emission. This work creatively exploited a cage-like porous complex (referred to as SWU-1) as the microreactor to recede the ACQ effect while modulating dual ECL emission of meso-tetra(4-carboxyphenyl)porphine (TCPP), which self-assembled with SWU-1 to form TCPP@SWU-1 nanocapsules (TCPP@SWU-1 NCs). As the microreactor, SWU-1 not only effectively constrained TCPP aggregation to improve electron-hole recombination efficiency but also improved stability of anion and cation radicals, thus significantly enhancing the dual emission of TCPP. Compared with TCPP aggregates, the resulting TCPP@SWU-1 NCs exhibited significantly enhanced anodic and cathodic emission, and their ΦECL was increased by 8.7-fold and 3.9-fold, respectively. Furthermore, black hole quencher-2 (BHQ2) can simultaneously quench anodic and cathodic signals. TCPP@SWU-1 NCs coupling BHQ2 conveniently achieved an ECL ratio detection of miRNA-126, and the limit of detection (S/N = 3) was 4.1 aM. This work pioneered the development of the cage-like porous complex SWU-1 as the microreactor to alleviate defects of the ACQ effect and mediate dual emission of TCPP. The coupling of dual-emitting TCPP@SWU-1 NCs and dual-function moderator BHQ2 created a novel single-luminophor-based ratio system for bioanalysis and provided a promising ECL analysis approach for miRNA-126.

Porphyrin-based covalent organic polymers with customizable photoresponses for photodynamic inactivation of bacteria

Porphyrin-linked covalent organic polymers (COPs) provide a reliable photocatalytic platform, while photodynamic inactivation (PDI) induced by reliable porphyrin-based COPs is considered to be an effective method to resist microbial contamination. Herein, three tunable porphyrin-based covalent organic polymers (H2-Por-COPs, OH-Por-COPs, and Zn-Por-COPs) are designed and employed for the PDI of Staphylococcus aureus and Escherichia coli under visible light illumination. Interestingly, singlet oxygen (1O2) generation by the Por-COPs can be manipulated via intramolecular regulation with the order Zn-Por-COP > OH-Por-COP > H2-Por-COP. With rationally tune, the Zn-Por-COP demonstrated remarkable antibacterial activity against Staphylococcus aureus (kill percentage 99.65 % ± 0.24 %) and Escherichia coli (kill percentage 97.25 % ± 1.78 %) in only 15 min under visible-light irradiation. Density functional theory (DFT) calculations and photophysical tests showed that the presence of electron-donating -OH groups on the aromatic linkers and Zn2+ ions in porphyrin units narrowed the HOMO-LUMO gap, enhancing both light absorption, intersystem crossing (ISC) and 1O2 generation for more efficient bacteria inactivation. This work can be applied to efficiently screen suitable photosensitizers and provides a rational regulatory strategy for PDI of pathogenic bacteria.

Reviewing the evolutive ACQ-to-AIE transformation of photosensitizers for phototheranostics

Photodynamic therapy (PDT) represents an emerging noninvasive treatment technique for cancers and various nonmalignant diseases, including infections. During the process of PDT, the physical and chemical properties of photosensitizers (PSs) critically determine the effectiveness of PDT. Traditional PSs have made great progress in clinical applications. One of the challenges is that traditional PSs suffer from aggregation-caused quenching (ACQ) due to their discotic structures. Recently, aggregation-induced emission PSs (AIE-PSs) with a twisted propeller-shaped conformation have been widely concerned because of high reactive oxygen species (ROS) generation efficiency, strong fluorescence efficiency, and resistance to photobleaching. However, AIE-PSs also have some disadvantages, such as short absorption wavelengths and insufficient molar absorption coefficient. When the advantages and disadvantages of AIE-PSs and ACQ-PSs are complementary, combining ACQ-PSs and AIE-PSs is a "win-to-win" strategy. As far as we know, the conversion of traditional representative ACQ-PSs to AIE-PSs for phototheranostics has not been reviewed. In the review, we summarize the recent progress on the ACQ-to-AIE transformation of PSs and the strategies to achieve desirable theranostic applications. The review would be helpful to design more efficient ACQ-AIE-PSs in the future and to accelerate the development and clinical application of PDT.

Enhancing the Electrochemiluminescence of Porphyrin via Crystalline Networks of Metal-Organic Frameworks for Sensitive Detection of Cardiac Troponin I

Porphyrins easily aggregate due to unfavorable π-π accumulation, causing luminescent quenching in the aqueous phase and subsequently reducing luminescent efficiency. It is a feasible way to immobilize porphyrin molecules through metal-organic framework materials (MOFs). In this study, 5,10,15,20-tetrakis (4-carboxyphenyl) porphyrin (TCPP) was introduced into the metal-organic skeleton (PCN-224) as a ligand. The result showed that the electrochemiluminescence (ECL) and photoluminescence (PL) efficiency of the MOF skeleton was 8.2 and 6.5 times higher than TCPP, respectively. Impressively, the periodic distribution of porphyrin molecules in the MOF framework can overcome the bottleneck of porphyrin aggregation, resulting in the organic ligand TCPP participating in the electron transfer reaction. Herein, based on the PCN-224, a sandwich-type ECL immunosensor was constructed for the determination of cardiac troponin I (cTnI). It provided sensitive detection of cTnI in the range of 1 fg/mL to 10 ng/mL with a detection limit of 0.34 fg/mL. This work not only innovatively exploited a disaggregation ECL (DIECL) strategy via the crystalline framework of MOF to enhance the PL and ECL efficiency of porphyrin but also provided a promising ECL platform for the ultrasensitive monitoring of cTnI.

Secondary Structure in Overcoming Photosensitizers' Aggregation: α-Helical Polypeptides for Enhanced Photodynamic Therapy

Aggregation caused quenching (ACQ) effect can severely inhibit the application of hydrophobic photosensitizers (PSs) bearing planar and rigid structures. Most of the reported cases utilized random-coiled polymers for the in vivo delivery of PSs, which would inevitably aggravate ACQ effect due to the flexible chains. In this work, the role of polymers' secondary structures (especially α-helical conformation) in overcoming the PSs' aggregation is systemically investigated based on the design of α-helical polypeptides bearing tetraphenylporphyrin (TPP) side chains. Atomistic molecular dynamics simulation, fluorescence quantum yield, and reactive oxygen species (ROS) generation yield are evaluated to demonstrate that α-helical polypeptide backbones can significantly boost both fluorescence quantum yield and ROS by suppressing the π-π stacking interaction between TPP units. The enhanced in vitro and in vivo phototoxicity for helical polypeptides also reveal functions of secondary structures in inhibiting ACQ and improving the membrane activity. Successful in vivo photodynamic therapy (PDT) results in mice bearing H22 tumors showed great potentials for further clinical applications.

Impact of the metal core on the electrochemiluminescence of a pair of atomically precise Au20 nanocluster isomers

Although the electrochemiluminescence (ECL) of metal nanoclusters has been reported, revealing the correlation between structure and ECL at an atomic level is highly challenging. Here, we reported the impact of the metal core of Au₂₀(SAdm)₁₂(CHT)₄ (Au₂₀-AC for short; SAdm = 1-adamantanethiolate; CHT= cyclohexanethiol) and its isomer Au₂₀(TBBT)₁₆ (TBBT = 4-tert-butylthiophenol) on their solution-state and solid-state electrochemiluminescence. In self-annihilation ECL experiments, Au₂₀-AC showed a strong cathodic ECL but a weak anodic ECL, while the ECL signal of Au₂₀(TBBT)₁₆ was weak and barely detectable. Density functional theory (DFT) calculations showed that the Au₇ kernel of [Au₂₀-AC]^- is metastable, weakening its anodic ECL. Au₂₀-AC in solution-state displayed an intense co-reactant ECL in the near-infrared region, which is 7 times higher than that of standard Ru(bpy)₃²⁺. The strongest solid-state ECL emissions of Au₂₀-AC and Au₂₀(TBBT)₁₆ were at 860 and 770 nm, respectively - 15 nm red-shifted for Au₂₀-AC and 20 nm blue-shifted for Au₂₀(TBBT)₁₆, compared to their corresponding solid-state photoluminescence (PL) emissions. This work shows that ECL is significantly affected by the subtle differences of the metal core, and offers a potential basis for sensing and immunoassay platforms based on atomically precise emissive metal nanoclusters.

In situ electrostatic assembly of porphyrin as enhanced PEC photosensitizer for bioassay of single HCT-116 cells via competitive reaction

Nowadays, synthesis of novel organic photosensitizer is imperative but challenging for photoelectrochemical (PEC) assay in analytical and biomedical fields. In this work, the PEC responses enhanced about 4.3 folds after in situ electrostatic assembly of 1-butyl-3-methylimidazole tetrafluoroborate ([BIm][BF₄]) on meso-tetra (4-carboxyphenyl) porphine (TP), which was first covalently linked with NH₂ modified indium tin oxide electrode ([BIm]⁺-^-TP-NH₂-ITO). Moreover, the [BIm]⁺-^-TP-NH₂-ITO showed a much larger photocurrent in a water/dimethyl sulfoxide (DMSO) binary solvent with a water fraction (f_w) of 90%, which displayed 6.7-fold increase over that in pure DMSO, coupled by discussing the PEC enhanced mechanism in detail. Then, the PEC signals were sharply quenched via a competitive reaction between magnetic bead linked dsDNA (i.e., initial hybridization of aptamer DNA with linking DNA) and HCT-116 cells (closely associated with CRC), where the liberated L-DNA stripped the [BIm]⁺ from [BIm]⁺-^-TP-NH₂-ITO. The PEC detection strategy exhibited a wider linear range (30 ∼ 3 × 10⁵ cells mL^-1) and a lower limit of detection (6 cells mL^-1), achieving single-cell bioanalysis even in diluted human serum sample. The in situ assembly strategy offers a valuable biosensing platform to amplify the PEC signals with advanced organic photosensitizer for early diagnosis of tumors.

Gold nanocluster-confined covalent organic frameworks as bifunctional probes for electrochemiluminescence and colorimetric dual-response sensing of Pb2

The development of bifunctional signal probes based on a single component is highly desirable for sensitive and simple dual-mode detection of Pb²⁺. Here, novel gold nanocluster-confined covalent organic frameworks (AuNCs@COFs) were fabricated as a bisignal generator to enable electrochemiluminescence (ECL) and colorimetric dual-response sensing. AuNCs with both intrinsic ECL and peroxidase-like activity were confined into the ultrasmall pores of the COFs via an in situ growth method. On the one hand, the space-confinement effect of the COFs closed the ligand motion-induced nonradiative transition channels of the AuNCs. As a result, the AuNCs@COFs exhibited a 3.3-fold enhancement in anodic ECL efficiency compared to the solid-state aggregated AuNCs using triethylamine as the coreactant. On the other hand, due to the outstanding spatial dispersibility of the AuNCs in the structurally ordered COFs, a high density of active catalytic sites and accelerated electron transfer were obtained, leading to the promotion of the enzyme-like catalytic capacity of the composite. To validate its practical applicability, a Pb²⁺-triggered dual-response sensing system was proposed based on the aptamer-regulated ECL and peroxidase-like activity of the AuNCs@COFs. Sensitive determinations down to 7.9 pM for the ECL mode and 0.56 nM for the colorimetric mode were obtained. This work provides an approach for designing single element-based bifunctional signal probes for dual-mode detection of Pb²⁺.

An ultrasensitive solid-state ECL biosensor based on synergistic effect between Zn-NGQDs and porphyrin-based MOF as "on-off-on" platform

To develop an ultra-sensitive solid-state electrochemiluminescence (ECL) biosensor for detection of miRNA 24, three different forms of porphyrin metal-organic framework (MOF) nanomaterials with good biocompatibility were synthesized through small molecule ligand modulation. We investigated various properties of synthesized MOFs in the presence of different small molecule ligands. The as-obtained 2D MOF nanodisk exhibited high ECL intensity and outstanding stability in the presence of a co-reactant at low concentrations. We also synthesized zinc-based quantum dots (Zn-NGQDs) with excellent photovoltaic properties by doping zinc dithiothreitol (DTT-Zn) into quantum dots. Accordingly, an enzyme-free solid-state ECL biosensor for miRNA 24 based on the "on-off-on" signal conversion strategy was created. Dependent on the synergy between the luminophor 2D MOF and Zn-NGQDs, the biosensor achieves a wide linear range from 1.00 × 10^-16 to 1.00 × 10^-10 mol·L^-1 and an exceedingly low detection limit of 0.03 fM. Furthermore, the ECL biosensor exhibits outstanding selectivity, repeatability, and stability. The method has great potential for investigating sensitive detection models for various biomolecules and the design of highly efficient MOF luminescent materials.

Highly Sensitive Immunochromatographic Detection of Zearalenone Based on Ultrabright Red-Emitted Aggregation-Induced Luminescence Nanoprobes

Highly luminescent nanospheres have been demonstrated in enhancing the sensitivity of lateral flow immunoassay (LFIA) due to their loading numerous luminescent dyes. However, the photoluminescence intensities of existing luminescent nanospheres are limited due to the aggregation-caused quenching effect. Herein, highly luminescent aggregation-induced emission luminogens embedded nanospheres (AIENPs) with red emission were introduced as signal amplification probes of LFIA for quantitative detection of zearalenone (ZEN). Optical properties of red-emitted AIENPs were compared with time-resolved dye-embedded nanoparticles (TRNPs). Results showed that red-emitted AIENPs have stronger photoluminescence intensity on the nitrocellulose membrane and superior environmental tolerance. Additionally, we benchmarked the performance of AIENP-LFIA against TRNP-LFIA using the same set of antibodies, materials, and strip readers. Results showed that AIENP-LFIA exhibits good dynamic linearity with the ZEN concentration from 0.195 to 6.25 ng/mL, with half competitive inhibitory concentration (IC₅₀) and detection of limit (LOD) at 0.78 and 0.11 ng/mL, respectively. The IC₅₀ and LOD are 2.07- and 2.36-fold lower than those of TRNP-LFIA. Encouragingly, the precision, accuracy, specificity, practicality, and reliability of this AIENP-LFIA for ZEN quantitation were further characterized. The results verified that the AIENP-LFIA has good practicability for the rapid, sensitive, specific, and accurate quantitative detection of ZEN in corn samples.

Advances in electrochemiluminescence luminophores based on small organic molecules for biosensing

Electrochemiluminescence (ECL) has several advantages, such as a near-zero background signal, high sensitivity, wide dynamic range, simplicity, and is widely used for sensing, imaging, and single cell analysis. ECL luminophores are the key factors in the performance of various applications. Among various luminophores, small organic luminophores exhibit many intriguing features including good biocompatibility, facile modification, well-defined molecular structure, and sustainable raw materials, making small organic luminophores attractive for the use in the ECL field. Although many great achievements have been made in the synthesis of new small organic luminophores, solving various challenges, and expanding new applications, there are almost no comprehensive reviews on small organic ECL luminophores. In this review, we briefly introduce the advantages and emission mechanisms of small organic ECL luminophores, summarize the main types, molecular characteristics, and ECL properties of most existing small organic ECL luminophores, and present the important applications and design principles in sensors, imaging, single cell analysis, sterilization, and other fields. Finally, the challenges and outlook of organic ECL luminophores to be popularized in biosensing applications are also discussed.

Artificial Light-Harvesting System Based on Zinc Porphyrin and Benzimidazole: Construction, Resonance Energy Transfer, and Amplification Strategy for Electrochemiluminescence

Constructing robust and efficient luminophores is of significant importance in the development of electrochemiluminescence (ECL) amplification strategies. Inspired by the resonance energy transfer in natural light-harvesting systems, we propose a novel ECL amplification system based on ECL resonance energy transfer (ECL-RET), which integrates two luminophores, benzimidazole (BIM) and zinc(II) tetrakis(4-carboxyphenyl)porphine (ZnTCPP), into one framework. Through disassembling and reconstruction processes, numerous BIM surround ZnTCPP in the constructed ZIF-9-ZnTCPP. Combined with the overlapped spectra between the emission of BIM and the absorption of ZnTCPP, the energy of multiple BIM (donor) can be concentrated to a single ZnTCPP (acceptor) to amplify the ECL emission of the acceptor. This work provides a convenient way to design an efficient ECL-RET system, which initiates a brand-new chapter in the development of ECL amplification strategies.

Study on the Electrochemiluminescence of Pentaphenylpyrrole in the Aqueous Phase Based on Structure-Regulated Strategy

Heterocyclic nitrogen compounds play a vital role in luminescent materials, but most of them face the challenges of aggregation-caused quenching (ACQ) and poor water solubility. In this work, we present the nitrogen heterocyclic pentaphenylpyrrole (PentaPP) with an excellent aggregation-induced electrochemiluminescence (AIE-ECL) performance in the aqueous phase through the comparison of the elegant ECL luminophore 5,10,15,20-tetraphenylporphyrin (TPP). Further studies suggest that such unique AIE-ECL arises from its propeller-like noncoplanar structure and the large conjugation from the phenyl groups on the ring. In addition, the new ECL analysis could feature some advantages of AIE characteristic, water compatibility, and strong signal and finally achieve the ultrasensitive detection toward the explosive 2,4,6-trinitrophenol (TNP) with a lower detection limit (1.1 nM). This study does not only benefit to solve the two key problems mentioned before but also enriches the fundamentals and applications for ECL and pyrrole research.

Studies on Annihilation and Coreactant Electrochemiluminescence of Thermally Activated Delayed Fluorescent Molecules in Organic Medium

Very recently, there is a great research interest in electrochemiluminescence (ECL) featuring thermally activated delayed fluorescence (TADF) properties, i.e., TADF-ECL. It is appealing since the earlier reports in this topic well-confirmed that this strategy has a great potential in achieving all-exciton-harvesting ECL efficiency under electrochemical excitation, which is a breakthrough in the topic of organic ECL. However, organic phase electrochemistry and ECL studies surrounding TADF-ECL are still extremely rare. Especially, the ECL spectra of previous reported TADF emitters are still very different from their PL spectra. In this work, we systematically measure and discuss the liquid electrochemistry and ECL behavior of two typical TADF molecules in organic medium. Most importantly, we verify for the first time that the ECL spectra of them (coreactant ECL mode) are identical to their PL spectra counterparts, which confirms the effectiveness of TADF photophysical properties in the coreactant ECL mode in practice.

Dual-potential electrochemiluminescent film constructed from single AIE luminogens for the sensitive detection of malachite green

Exploiting efficient electrochemiluminescent (ECL) luminogens is crucial for the development of high-performance ECL sensors. Herein, a kind of efficient luminogen (BTPEBT) consisting of benzothiadiazole (BTD) as an electron acceptor and tetraphenylethylene (TPE) as an electron donor was facilely synthesized through a one-step Suzuki reaction. BTPEBT showed typical aggregation-induced emission (AIE) effects with a high solid-state quantum yield of 69.8%. The fabricated solid-state ECL film that is based on single AIE luminogens presented unique dual-potential ECL properties for the first time. The bright ECL of this film could be observed by the naked eye with a satisfactory ECL efficiency of 22.8%. The dense ECL film showed a low electron-transfer resistance, which favors electron transfer among AIE luminogens, electrolytes and the electrode, giving rise to bright ECL emission. The bright ECL film was developed as an ECL sensor for the sensitive and selective detection of malachite green (MG) in a broad linear range from 10^-10 to 10^-5 M. The limit of detection (LOD) was as low as 7.6 × 10^-11 M. Moreover, the ECL sensing platform was further employed to detect MG in a real fish tissue sample with high sensitivity and good specificity. More importantly, the recycled BTPEBT film had good reproducibility for MG detection. The novel dual-potential ECL film constructed from single AIE luminogens provides a promising platform for the sensitive detection of MG in the food industry.

A flexible and bright surface-enhanced electrochemiluminescence film constructed from efficient aggregation-induced emission luminogens for biomolecular sensing

A bright surface-enhanced electrochemiluminescence film (SEEF) was fabricated from an organic luminogen with aggregation-induced emission (AIEgen) features on flexible substrates. Flexible carbonous substrates including carbon fiber cloth (GCFC) and carbon fiber paper (GCFP) were decorated with gold nanoparticles (AuNPs) through electrochemical deposition methods, followed by facilely casting AIEgen solutions. The resulting SEEF had a low driving potential of +0.84 V, and its electrochemiluminescence (ECL) was readily observed by the naked eye. The systematic investigation showed that the bright ECL was associated with the promoted electrochemical oxidation and radiative decay of excited AIEgens enhanced by AuNP deposition. Intriguingly, the ECL intensity of the film was linearly enhanced by increasing AIEgen loadings, which allowed tuning of ECL brightness on demand. Moreover, the SEEF was flexible and immune to folding. The ECL intensity rarely changed even when consecutively folding the film 20 times due to the strong interaction between the AIEgen and substrate. The SEEF was further used to sense biomolecules in aqueous media. The ECL of the film was linearly quenched in the presence of dopamine (DA) in the range of 10^-15-10^-6 M with a record-low limit of detection of 3.16 × 10^-16 M. Furthermore, a simple method based on grayscale analysis of ECL images (GAEI) was used for visual sensing of DA. This work provides a kind of novel bright ECL film, useful for the ultrasensitive monitoring of biomolecules in aqueous media.

Highly Efficient Aggregation-Induced Enhanced Electrochemiluminescence of Cyanophenyl-Functionalized Tetraphenylethene and Its Application in Biothiols Analysis

Exploring new electrochemiluminescence (ECL) luminophores with high ECL efficiency and good stability in aqueous solution is in great demand for biological sensing. In this work, highly efficient aggregation-induced enhanced ECL of cyanophenyl-functionalized tetraphenylethene (tetra[4-(4-cyanophenyl)phenyl]ethene, TCPPE) and its application in biothiols analysis were reported. TCPPE contains four 4-cyanophenyl groups covalently attached to the tetraphenylethene (TPE) core, generating a nonplanar three-dimensional twisted conformation structure. TCPPE nanoparticles (NPs) with an average size of 15.84 nm were prepared by a precipitation method. High ECL efficiency (593%, CdS as standard) and stable ECL emission (over one month) were obtained for TCPPE NPs in aqueous solution. The unique properties of TCPPE NPs could be ascribed to the efficient suppression of nonradiative transition, the decrease of the energy gap, and the increase of anionic radical stability, which were proved by theoretical calculation and electrochemical and fluorescence methods. Contrasting aggregation-induced ECL chromic emission was first observed for TCPPE NPs. As a proof-of-methodology, an ECL method was developed for three biothiol assays with detection limits of 6, 7, and 300 nM for cysteine, homocysteine, and glutathione, respectively. This work demonstrates that TCPPE NPs are promising ECL luminophores, and the incorporation of appropriate substituents into luminophores can improve ECL efficiency and radical stability.

Novel Aggregation-Enhanced PEC Photosensitizer Based on Electrostatic Linkage of Ionic Liquid with Protoporphyrin IX for Ultrasensitive Detection of Molt-4 Cells

Nowadays, aggregation quenching of most organic photosensitizers in aqueous media seriously restricts analytical and biomedical applications of photoelectrochemical (PEC) sensors. In this work, an aggregation-enhanced PEC photosensitizer was prepared by electrostatically bonding protoporphyrin IX (PPIX) with an ionic liquid of 1-butyl-3-methylimidazole tetrafluoroborate ([BMIm][BF₄]), termed as PPIX-[BMIm] for clarity. The resultant PPIX-[BMIm] showed weak photocurrent in pure dimethyl sulfoxide (DMSO, good solvent), while the PEC signals displayed a 44.1-fold enhancement in a water (poor solvent)/DMSO binary solvent with a water fraction (f_w) of 90%. Such PEC-enhanced mechanism was critically studied by electrochemistry and density functional theory (DFT) calculation in some detail. Afterward, a label-free PEC cytosensor was built for ultrasensitive bioassay of acute lymphoblastic leukemia (molt-4) cells by electrodepositing Au nanoparticles (Au NPs) on the PPIX-[BMIm] aggregates and sequential assembly of protein tyrosine kinase (PTK) aptamer DNA (aptDNA). The resultant cytosensor showed a wide linear range (300 to 3 × 10⁵ cells mL^-1) with a limit of detection (LOD) as low as 63 cells mL^-1. The aggregation-enhanced PEC performance offers a valuable and practical pathway for synthesis of advanced organic photosensitizer to explore its PEC applications in early diagnosis of tumors.

An ultra-high-sensitivity electrochemiluminescence aptasensor for Pb2+ detection based on the synergistic signal-amplification strategy of quencher abscission and G-quadruplex generation

Signal amplification provides an effective way to improve detection performance. Herein, an ultrasensitive electrochemiluminescence (ECL) aptasensor for Pb²⁺ detection was developed based on a dual signal-amplification strategy of the abscission of a quencher and the generation of a G-quadruplex by one-step and simultaneous way. Nitrogen-doped carbon quantum dots linked with complementary DNA (cDNA-NCQDs) at the sensing interface was applied as the quencher of a tris(4,4'-dicarboxylic acid-2,2'-bipyridyl)ruthenium(II) (Ru(dcbpy)₃²⁺)/tripropylamine system to minimize the ECL signal due to the intermolecular hydrogen bond-induced energy-transfer process. Upon the addition of Pb²⁺, its specific binding with the aptamer triggered the abscission of cDNA-NCQDs, accompanied by the formation of G-quadruplex on the surface of the electrode, both of which amplified the intensity of the light emission. The ECL amplification efficiency induced by the above two mechanisms (78.6%) was valuably greater than that of their sum value (69.3%). This synergistic effect resulted in high detection sensitivity of the ECL aptasensor, which allowed to thereby obtain Pb²⁺ measurements in the range of 1 fM - 10 nM with an ultra-low detection limit of 0.19 fM. The Pb²⁺-mediated synergistic signal-amplification ECL strategy can provide a new approach for integrating various amplification strategies.

Lighting Up Electrochemiluminescence-Inactive Dyes via Grafting Enabled by Intramolecular Resonance Energy Transfer

Due to near-zero optical background and photobleaching, electrochemiluminescence (ECL), an optical phenomenon excited by electrochemical reactions, has drawn extensive attention, especially for ultrasensitive bioassays. Developing diverse ECL emitters is crucial to unlocking their multiformity and performances but remains a formidable challenge due to the rigorous requirements for ECL. Herein, we report a general strategy to light up ECL-inactive dyes in an aqueous solution via grafting, a well-developed concept for plant propagation since 500 BCE. As a proof of concept, a series of luminol donor-dye acceptor-based ECL emitters were grafted with near-unity resonance energy transfer (RET) efficiency and coarse/fine-tunable emission wavelengths. Rather than the sophisticated design of new skeleton-based molecules to meet all of the prerequisites for ECL in a constrained manner, each unit in the proposed ECL ensemble performed its functions maximally. As a result, beyond traditional two-dimensional (2D) ones, a three-dimensional (3D) coordinate biosensing system, simultaneously showing a calibration curve and selectivity, was established using the new ECL emitter. This lighting up strategy would generally address the scarcity of ECL emitters and enable unprecedented functions.

Polyprodrug Nanomedicines: An Emerging Paradigm for Cancer Therapy

Nanomedicines have the potential to provide advanced therapeutic strategies in combating tumors. Polymer-prodrug-based nanomedicines are particularly attractive in cancer therapies owing to the maximum drug loading, prolonged blood circulation, and reduced premature leakage and side effects in comparison with conventional nanomaterials. However, the difficulty in precisely tuning the composition and drug loading of polymer-drug conjugates leads to batch-to-batch variations of the prodrugs, thus significantly restricting their clinical translation. Polyprodrug nanomedicines inherit the numerous intrinsic advantages of polymer-drug conjugates and exhibit well-controlled composition and drug loading via direct polymerization of therapeutic monomers, representing a promising nanomedicine for clinical tumor therapies. In this review, recent advances in the development of polyprodrug nanomedicines are summarized for tumor elimination. Various types of polyprodrug nanomedicines and the corresponding properties are first summarized. The unique advantages of polyprodrug nanomedicines and their key roles in various tumor therapies are further highlighted. Finally, current challenges and the perspectives on future research of polyprodrug nanomedicines are discussed.

Ultrahigh Aggregation Induced Emission Efficiency in Multitwist-Based Luminogens under High Pressure

Increasing aggregation induced emission (AIE) efficiency is of fundamental interest as it directly reflects performance of multitwist-based luminogens in bioimaging and in the photoelectric device field. However, an effective and convenient methodology to increase AIE efficiency significantly remains a challenge. Here, we present a general strategy to increase AIE efficiency of multitwist-based luminogens by pressure, resulting in a 120.1-fold enhancement of the AIE intensity of tris[4-(diethylamino)phenyl]amine (TDAPA) under high pressure compared to that of the traditional method. AIE efficiency of TDAPA increases from 0.5% to 46.1% during compression. Experimental and theoretical investigations reveal that the AIE efficiency enhancement originates from intramolecular vibration and the twisted intramolecular charge transfer are suppressed under high pressure. High AIE efficiency under high pressure provides an important inspiration for improving performance of multitwist-based luminogens in the lighting and biomedical fields.