Nitrogen-Doped Amorphous Zn-Carbon Multichannel Fibers for Stable Lithium Metal Anodes

Anchoring Active Li Metal in Oriented Channel by In Situ Formed Nucleation Sites Enabling Durable Lithium-Metal Batteries

Lithium metal is the ultimate anode material for pursuing the increased energy density of rechargeable batteries. However, fatal dendrites growth and huge volume change seriously hinder the practical application of lithium metal batteries (LMBs). In this work, a lithium host that preinstalled CoSe nanoparticles on vertical carbon vascular tissues (VCVT/CoSe) is designed and fabricated to resolve these issues, which provides sufficient Li plating space with a robust framework, enabling dendrite-free Li deposition. Their inherent N sites coupled with the in situ formed lithiophilic Co sites loaded at the interface of VCVT not only anchor the initial Li nucleation seeds but also accelerate the Li+ transport kinetics. Meanwhile, the Li2Se originated from the CoSe conversion contributes to constructing a stable solid-electrolyte interphase with high ionic conductivity. This optimized Li/VCVT/CoSe composite anode exhibits a prominent long-term cycling stability over 3000 h with a high areal capacity of 10 mAh cm-2. When paired with a commercial nickel-rich LiNi0.83Co0.12Mn0.05O2 cathode, the full-cell presents substantially enhanced cycling performance with 81.7% capacity retention after 300 cycles at 0.2 C. Thus, this work reveals the critical role of guiding Li deposition behavior to maintain homogeneous Li morphology and pave the way to stable LMBs.

Ordered mesoporous nanofibers mimicking vascular bundles for lithium metal batteries

Hierarchical self-assembly with long-range order above centimeters widely exists in nature. Mimicking similar structures to promote reaction kinetics of electrochemical energy devices is of immense interest, yet remains challenging. Here, we report a bottom-up self-assembly approach to constructing ordered mesoporous nanofibers with a structure resembling vascular bundles via electrospinning. The synthesis involves self-assembling polystyrene (PS) homopolymer, amphiphilic diblock copolymer, and precursors into supramolecular micelles. Elongational dynamics of viscoelastic micelle solution together with fast solvent evaporation during electrospinning cause simultaneous close packing and uniaxial stretching of micelles, consequently producing polymer nanofibers consisting of oriented micelles. The method is versatile for the fabrication of large-scale ordered mesoporous nanofibers with adjustable pore diameter and various compositions such as carbon, SiO2, TiO2 and WO3. The aligned longitudinal mesopores connected side-by-side by tiny pores offer highly exposed active sites and expedite electron/ion transport. The assembled electrodes deliver outstanding performance for lithium metal batteries.

Challenges and Strategies of Aluminum Anodes for High-Performance Aluminum-Air Batteries

Aluminum-air battery (AAB) is a promising candidate for next-generation energy storage/conversion systems due to its cost-effectiveness and impressive theoretical energy density of 8100 Wh kg-1, surpassing that of lithium-ion batteries. Nonetheless, the practical applicability of AABs is hampered by the occurrence of serious self-corrosion side reactions and substantial capacity loss, resulting in suboptimal anode utilization. Consequently, improving the anode utilization to facilitate the construction of high-performance AABs have attracted widespread attention. Herein, the fundamentals and strategies to enhance aluminum anode utilization are reviewed from modifications of aluminum anodes and electrolytes. This comprehensive review may provide a scientific tool for the development of novel AABs in the future.

A 3D Lithiophilic Host for Dendrite-Free Lithium Metal Anode via One-Step Carbonization of an Energetic Metal-Organic Framework

Low Coulombic efficiency (CE) and safety issues are huge problems that hinder the practical application of Li metal anodes. Constructing Li host structures decorated with functional species can restrain the growth of Li dendrites and alleviate the great volume change. Here, a 3D porous carbonaceous skeleton modified with rich lithiophilic groups (Zn, ZnO, and Zn(CN)2 ) is synthesized as a Li host via one-step carbonization of a triazole-containing metal-organic framework. The nano lithiophilic groups serve as preferred sites for Li nucleation and growth, regulating a uniform Li+ flux and uniform current density distribution. In addition, the 3D porous network functions as a Li reservoir that provides rich internal space to store Li, thus alleviating the volumetric expansion during Li plating/stripping process. Thanks to these component and structural merits, an ultra-low overpotential for Li deposition is achieved, together with high CE of over 99.5% for more than 500 cycles at 1 mA cm-2 and 1 mAh cm-2 in half cells. The symmetric cells exhibit a prolonged cycling of 900 h at 1 mA cm-2 . The full cells by coupling Zn/ZnO/Zn(CN)2 @C-Li anode with LiFePO4 cathode deliver a high capacity retention of 94.3% after 200 cycles at 1 C.

Synergistic regulation of Li deposition on F-doped hollow carbon spheres toward dendrite-free lithium metal anodes

The notorious issues of lithium (Li) dendrite growth and volume change hinder the practical applications of Li metal anodes. LiF as a key component of the solid electrolyte interface (SEI) governs Li+ transport and deposition, yet the formation of LiF consumes the anions (PF6-/TFSI-) in the electrolyte, preventing the stable cycling of Li anodes. Herein, fluorine (F)-doped hollow carbon (FHC) was synthesized and used to construct a composite current collector with FHC as an F-rich buffer layer for modifying the Cu foil. The F content provided by FHC not only mitigates the anion (PF6-/TFSI-) consumption but also enhances the stability of SEI. The hollow structure of FHC with abundant internal space can accommodate deposited Li to relieve the volume change during cycling. Besides, the significantly improved specific surface area of the electrode effectively reduces the local current density to achieve a homogeneous Li deposition. Due to the above cooperation, the symmetrical cell of Cu@FHC-Li||Cu@FHC-Li maintains stable cycling for more than 1800 h with a hysteresis voltage of 19 mV. In addition, full cell coupling with LiFePO4 cathode delivers excellent long-term cycling and rate performance. This work provides an effective route for developing stable Li metal anodes.

In Situ Electrospinning MOF-Derived Highly Dispersed α-Cobalt Confined in Nitrogen-Doped Carbon Nanofibers Nanozyme for Biomolecule Monitoring

Designing a metal-organic framework (MOF)-derived nanozyme with highly dispersed active sites and high catalytic activity as well as robust structure for colorimetric biosensing of diverse biomolecules remains a substantial challenge. Here, an MOF-derived highly dispersed and pure α-cobalt confined in a nitrogen-doped carbon nanofiber (α-Co@NCNF) nanozyme with superior glucose oxidase (GOD)- and peroxidase (POD)-like activities was constructed for colorimetric assay of multiple biomolecules. Specifically, the α-Co@NCNF nanozyme was synthesized, utilizing in situ electrospinning Co-MOFs into polyacrylonitrile nanofiber (PAN) followed by a pyrolysis process. Taking advantage of the in situ electrospinning strategy, the α-Co nanoparticles were confined in continuous porous NCNF to restrict the growth and prevent the aggregation and oxidation during the pyrolysis process. The resulting special structure considerably improved the enzyme-like performance. A series of experiments validate that the enzyme-like activity of the α-Co@NCNF nanozyme was superior to that of Co@CoO@NCNF (derivatives from Co-MOFs grown on the surface of PAN nanofiber) and nature enzymes. Furthermore, α-Co@NCNF nanozyme-based colorimetric biosensing was developed for monitoring glucose, hydrogen peroxide (H2O2), and glutathione (GSH) and the corresponding linear ranges are 0.1-50 and 50-900 μM and 5-55 and 0.1-20 μM accompanied by the corresponding low detection of 0.03, 1.66, and 0.03 μM. The proposed method for the construction of α-Co@NCNF nanozyme with dual enzyme-like properties provides a new insight for designing novel nanozymes and has prospects for application in colorimetric biosensing.

Highly lithiophilic and structurally stable Cu-Zn alloy skeleton for high-performance Li-rich ternary anodes

Lithium (Li)-rich ternary alloy, comprising a multi-alloy phase as the built-in three-dimensional (3D) framework and a Li metal phase as a reversible Li reservoir, is a promising high-energy-density anode for rechargeable Li metal batteries. The introduction of metal/metalloid components to the alloy can effectively regulate Li deposition and maintain the dimensional integrity of the Li anode. Herein, the lithium-copper-zinc (Li-Cu-Zn) ternary alloy, as a new type of alloy anode, is synthesized via a facile thermal melting method. The fully delithiated 3D scaffold comprised two Cu-Zn alloy phases named CuZn and CuZn5. These alloy phases exhibit higher lithiophilicity and structural stability than Li-Zn and Li-Cu alloys. Moreover, the CuZn phase is electrochemically inert, ensuring the geometric stability of the anode, while the CuZn5 phase can readily undergo alloying reaction with Li to form the LiZn phase, thereby facilitating uniform Li nucleation and deposition. The hybridized multiphase alloy structure and specific energy storage mechanism of the Cu-Zn based alloy scaffold in the ternary alloy anode facilitate dendrite-free Li deposition and prolonged cycle lifetime. The Li metal full battery based on lithium iron phosphate (LiFePO4) cathode exhibits high cycling stability with high-capacity retention of 95.4% after 1000 cycles at 1C.

Three-Dimensional Zinc-Seeded Carbon Nanofiber Architectures as Lightweight and Flexible Hosts for a Highly Reversible Zinc Metal Anode

Uneven zinc (Zn) deposition typically leads to uncontrollable dendrite growth, which renders an unsatisfactory cycling stability and Coulombic efficiency (CE) of aqueous zinc ion batteries (ZIBs), restricting their practical application. In this work, a lightweight and flexible three-dimensional (3D) carbon nanofiber architecture with uniform Zn seeds (CNF-Zn) is prepared from bacterial cellulose (BC), a kind of biomass with low cost, environmental friendliness, and abundance, as a host for highly reversible Zn plating/stripping and construction of high-performance aqueous ZIBs. The as-prepared 3D CNF-Zn with a porous interconnected network significantly decreases the local current density, and the functional Zn seeds provide uniform nuclei to guide the uniform Zn deposition. Benefiting from the synergistic effect of Zn seeds and the 3D porous framework in the flexible CNF-Zn host, the electrochemical performance of the as-constructed ZIBs is significantly improved. This flexible 3D CNF-Zn host delivers a high and stable CE of 99.5% over 450 cycles, ensuring outstanding rate performance and a long cycle life of over 500 cycles at 4 A g-1 in the CNF-Zn@Zn//NaV3O8·1.5H2O full battery. More importantly, owing to the flexibility of the 3D CNF-Zn host, the as-assembled pouch cell shows outstanding mechanical flexibility and excellent energy storage performance. This strategy of producing readily accessible carbon from biomass can be employed to develop advanced functional nanomaterials for next-generation flexible energy storage devices.

Directing (110) Oriented Lithium Deposition through High-flux Solid Electrolyte Interphase for Dendrite-free Lithium Metal Batteries

Controlling lithium (Li) electrocrystallization with preferred orientation is a promising strategy to realize highly reversible Li metal batteries (LMBs) but lack of facile regulation methods. Herein, we report a high-flux solid electrolyte interphase (SEI) strategy to direct (110) preferred Li deposition even on (200)-orientated Li substrate. Bravais rule and Curie-Wulff principle are expanded in Li electrocrystallization process to decouple the relationship between SEI engineering and preferred crystal orientation. Multi-spectroscopic techniques combined with dynamics analysis reveal that the high-flux CF3 Si(CH3 )3 (F3 ) induced SEI (F3 -SEI) with high LiF and -Si(CH3 )3 contents can ingeniously accelerate Li+ transport dynamics and ensure the sufficient Li+ concentration below SEI to direct Li (110) orientation. The induced Li (110) can in turn further promote the surface migration of Li atoms to avoid tip aggregation, resulting in a planar, dendrite-free morphology of Li. As a result, our F3 -SEI enables ultra-long stability of Li||Li symmetrical cells for more than 336 days. Furthermore, F3 -SEI modified Li can significantly enhance the cycle life of Li||LiFePO4 and Li||NCM811 coin and pouch full cells in practical conditions. Our crystallographic strategy for Li dendrite suppression paves a path to achieve reliable LMBs and may provide guidance for the preferred orientation of other metal crystals.

A Highly-Lithiophilic Mn3O4/ZnO-Modified Carbon Nanotube Film for Dendrite-Free Lithium Metal Anodes

Lithium metal anode is deemed as a potential candidate for high energy density batteries, which has attracted increasing attention. Unfortunately, Li metal anode suffers from issues such as dendrite grown and volume expansion during cycling, which hinders its commercialization. Herein, we designed a porous and flexible self-supporting film comprising of single-walled carbon nanotube (SWCNT) modified with a highly-lithiophilic heterostructure (Mn₃O₄/ZnO@SWCNT) as the host material for Li metal anodes. The p-n-type heterojunction constructed by Mn₃O₄ and ZnO generates a built-in electric field that facilitates electron transfer and Li⁺ migration. Additionally, the lithiophilic Mn₃O₄/ZnO particles serve as the pre-implanted nucleation sites, dramatically reducing the lithium nucleation barrier due to their strong binding energy with lithium atoms. Moreover, the interwoven SWCNT conductive network effectively lowers the local current density and alleviates the tremendous volume expansion during cycling. Thanks to the aforementioned synergy, the symmetric cell composed of Mn₃O₄/ZnO@SWCNT-Li can stably maintain a low potential for more than 2500 h at 1 mA cm^-2 and 1 mAh cm^-2. Furthermore, the Li-S full battery composed of Mn₃O₄/ZnO@SWCNT-Li also shows excellent cycle stability. These results demonstrate that Mn₃O₄/ZnO@SWCNT has great potential as a dendrite-free Li metal host material.

Thermal-Stable Separators: Design Principles and Strategies Towards Safe Lithium-Ion Battery Operations

Lithium-ion batteries (LIBs) are momentous energy storage devices, which have been rapidly developed due to their high energy density, long lifetime, and low self-discharge rate. However, the frequent occurrence of fire accidents in laptops, electric vehicles, and mobile phones caused by thermal runaway of the inside batteries constantly reminds us of the urgency in pursuing high-safety LIBs with high performance. To this end, this Review surveyed the state-of-the-art developments of high-temperature-resistant separators for highly safe LIBs with excellent electrochemical performance. Firstly, the basic properties of separators (e. g., thickness, porosity, pore size, wettability, mechanical strength, and thermal stability) in constructing commercialized LIBs were introduced. Secondly, the working mechanisms of advanced separators with different melting points acting in the thermal runaway stage were discussed in terms of improving battery safety. Thirdly, rational design strategies for constructing high-temperature-resistant separators for LIBs with high safety were summarized and discussed, including graft modification, blend modification, and multilayer composite modification strategies. Finally, the current obstacles and future research directions in the field of high-temperature-resistant separators were highlighted. These design ideas are expected to be applied to other types of high-temperature-resistant energy storage systems working under extreme conditions.

Advances in Nanofibrous Materials for Stable Lithium-Metal Anodes

Lithium metal is regarded as the most potential anode material for improving the energy density of batteries due to its high specific capacity and low electrode potential. However, the practical application of lithium-metal anodes (LMAs) still faces severe challenges such as uncontrollable dendrites growth and large volume expansion. The development of functional nanomaterials has brought opportunities for the revival of LMAs. Among them, nanofibrous materials show great application potential for LMAs protection due to their distinct functional and structural features. Here, the latest research progress in nanofibrous materials for LMAs is systematically outlined. First, the problems existing in the practical application of LMAs are analyzed. Then, prospective strategies and recent research progress toward stable LMAs based on nanofibrous materials are summarized from the aspects of artificial protective layers, three-dimensional frameworks, separators, and solid-state electrolytes. Finally, the future development of nanofibrous materials for the protection of lithium-metal batteries is summarized and prospected. This review establishes a close connection between nanofibrous materials and LMA modification and provides insight for the development of high-safety lithium-metal batteries.

N,S-Doped Porous Carbon Nanobelts Embedded with MoS2 Nanosheets as a Self-Standing Host for Dendrite-Free Li Metal Anodes

Metallic Li is one of the most promising anodes for high-energy secondary batteries. However, the enormous volume changes and severe dendrite formation during the Li plating/stripping process hinder the practical application of Li metal anodes (LMAs). We have developed a sulfate-assisted strategy to synthesize a self-standing host composed of N,S-doped porous carbon nanobelts embedded with MoS₂ nanosheets (MoS₂ @NSPCB) for use in LMAs. In situ measurements and theoretical calculations reveal that the uniformly distributed MoS₂ derivatives within the carbon nanobelts serve as stable lithiophilic sites which effectively homogenize Li nucleation and suppress dendrite formation. In addition, the hierarchical porosity and 3D nanobelt networks ensure fast Li-ion diffusion and accommodate the volume change of Li deposits during the plating/stripping process. As a result, a Li-Li symmetric cell using the MoS₂ @NSPCB host operates steadily over 1500 h with an ultralow voltage hysteresis (≈24.2 mV) at 3 mA cm^-2 /3 mAh cm^-2 . When paired with a LiFePO₄ cathode, the current collector-free LMA endows the full cell with a high energy density of 460 Wh kg^-1 and good cycling performance (with a capacity retention of ≈70% even after 1600 cycles at 10 C).

Robust Room-Temperature Sodium-Sulfur Batteries Enabled by a Sandwich-Structured MXene@C/Polyolefin/MXene@C Dual-functional Separator

Room-temperature sodium-sulfur (RT-Na-S) batteries are attracting increased attention due to their high theoretical energy density and low-cost. However, the traditional RT-Na-S batteries assembled with glass fiber (GF) separators are still hindered by the polysulfide shuttle effect and sodium dendrite growth, limiting the battery's capacity and cycling stability. Here, a facile and effective method toward commercial polyolefin separators for constructing stable RT-Na-S batteries is presented. By coating commercial polypropylene membrane with core-shell structured MXene@C nanosheets, a powerful dual-functional separator with improved electrolyte wettability that can inhibit polysulfide migration and induce uniform sodium disposition is developed. More importantly, the modified separator can also accelerate the conversion kinetics of sodium polysulfides. Benefiting from these characteristics, the as-prepared RT-Na-S battery exhibits a remarkably enhanced capacity (1159 mAh g^-1 at 0.2 C) and excellent cycling performance (95.8% of capacity retention after 650 cycles at 0.5 C). This study opens a promising avenue for the development of high-performance Na-S batteries.

Freestanding and Flexible Interfacial Layer Enables Bottom-Up Zn Deposition Toward Dendrite-Free Aqueous Zn-Ion Batteries

Aqueous rechargeable zinc ion batteries are regarded as a competitive alternative to lithium-ion batteries because of their distinct advantages of high security, high energy density, low cost, and environmental friendliness. However, deep-seated problems including Zn dendrite and adverse side reactions severely impede the practical application. In this work, we proposed a freestanding Zn-electrolyte interfacial layer composed of multicapsular carbon fibers (MCFs) to regulate the plating/stripping behavior of Zn anodes. The versatile MCFs protective layer can uniformize the electric field and Zn²⁺ flux, meanwhile, reduce the deposition overpotentials, leading to high-quality and rapid Zn deposition kinetics. Furthermore, the bottom-up and uniform deposition of Zn on the Zn-MCFs interface endows long-term and high-capacity plating. Accordingly, the Zn@MCFs symmetric batteries can keep working up to 1500 h with 5 mAh cm^-2. The feasibility of the MCFs interfacial layer is also convinced in Zn@MCFs||MnO₂ batteries. Remarkably, the Zn@MCFs||α-MnO₂ batteries deliver a high specific capacity of 236.1 mAh g^-1 at 1 A g^-1 with excellent stability, and maintain an exhilarating energy density of 154.3 Wh kg^-1 at 33% depth of discharge in pouch batteries.

Adjustable Mixed Conductive Interphase for Dendrite-Free Lithium Metal Batteries

Lithium (Li) metal batteries with high energy density are of great promise for next-generation energy storage; however, they suffer from severe Li dendritic growth and an unstable solid electrolyte interphase. In this study, a mixed ionic and electronic conductive (MIEC) interphase layer with an adjustable ratio assembled by ZnO and Zn nanoparticles is developed. During the initial cycle, the in situ formed Li₂O with high ionic conductivity and a lithiophilic LiZn alloy with high electronic conductivity enable fast Li⁺ transportation in the interlayer and charge transfer at the ion/electron conductive junction, respectively. The optimized interface kinetics is achieved by balancing the ion migration and charge transfer in the MIEC Li₂O-LiZn interphase. As a result, the symmetric cell with MIEC interphase delivers superior cycling stability of over 1200 h. Also, Li||Zn-ZnO@PP||LFP (LFP = LiFePO₄) full cells exhibit long cyclic life for 2000 cycles with a very high capacity retention of 91.5% at a high rate of 5 C and stable cycling for 350 cycles at a high LFP loading mass of 13.27 mg cm^-2.

Codoped porous carbon nanofibres as a potassium metal host for nonaqueous K-ion batteries

Potassium metal is an appealing alternative to lithium as an alkali metal anode for future electrochemical energy storage systems. However, the use of potassium metal is hindered by the growth of unfavourable deposition (e.g., dendrites) and volume changes upon cycling. To circumvent these issues, we propose the synthesis and application of nitrogen and zinc codoped porous carbon nanofibres that act as potassium metal hosts. This carbonaceous porous material enables rapid potassium infusion (e.g., < 1 s cm−2) with a high potassium content (e.g., 97 wt. %) and low potassium nucleation overpotential (e.g., 15 mV at 0.5 mA cm−2). Experimental and theoretical measurements and analyses demonstrate that the carbon nanofibres induce uniform potassium deposition within its porous network and facilitate a dendrite-free morphology during asymmetric and symmetric cell cycling. Interestingly, when the potassium-infused carbon material is tested as an active negative electrode material in combination with a sulfur-based positive electrode and a nonaqueous electrolyte solution in the coin cell configuration, an average discharge voltage of approximately 1.6 V and a discharge capacity of approximately 470 mA h g−1 after 600 cycles at 500 mA g−1 and 25 °C are achieved.

Development of quasi-solid-state anode-free high-energy lithium sulfide-based batteries

Anode-free lithium batteries without lithium metal excess are a practical option to maximize the energy content beyond the conventional design of Li-ion and Li metal batteries. However, their performance and reliability are still limited by using low-capacity oxygen-releasing intercalation cathodes and flammable liquid electrolytes. Herein, we propose quasi-solid-state anode-free batteries containing lithium sulfide-based cathodes and non-flammable polymeric gel electrolytes. Such batteries exhibit an energy density of 1323 Wh L^-1 at the pouch cell level. Moreover, the lithium sulfide-based anode-free cell chemistry endows intrinsic safety thanks to a lack of uncontrolled exothermic reactions of reactive oxygen and excess Li inventory. Furthermore, the non-flammable gel electrolyte, developed from MXene-doped fluorinated polymer, inhibits polysulfide shuttling, hinders Li dendrite formation and further secures cell safety. Finally, we demonstrate the improved cell safety against mechanical, electrical and thermal abuses.

Lithiophilic onion-like carbon spheres as lithium metal uniform deposition host

Lithium metal is considered as a promising anode material for next-generation secondary batteries, owing to its high theoretical specific capacity (3860 mA h g^-1). Nevertheless, the practical application of Li in lithium metal batteries (LMBs) is hampered by inhomogeneous Li deposition and irreversible "dead Li", which lead to low coulombic efficiency (CE) and safe hazards. Designing unique lithiophilic structure is an efficient strategy to control Li uniformly plating /stripping. Here, we report the silver (Ag) nanoparticles coated with nitrogen-doped onion-like carbon microspheres (Ag@NCS) as a host to reduce the nucleation overpotential of Li for dendrite-free LBMs. The Ag@NCS were prepared by a simple one-step injection pyrolysis. The lithiophilic Ag is demonstrated to be priority selective deposition of Li in the carbon cage. Meanwhile, the onion-like structure benefits to uniform lithium nucleation and dendrite-free lithium during cycling. Impressively, we successfully captured lithium metal on different hosts at atomic scale, further proving that Ag@NCS can effectively and uniformly deposit Li. Besides, Ag@NCS show a superiorly electrochemical performance with a low nucleation overpotential (∼1 mV), high CE and stable cycling performance (over 400 cycles at 0.5 mA cm^-2) compared to the Ag-free onion-like carbon in LMBs. Even under harsh conditions (1 mA cm^-2, 4 mA h cm^-2), Ag@NCS still present superior cycling stability for more than 150 cycles. Furthermore, a full cell composed of LiFePO₄ cathode exhibits significantly improved voltage hysteresis with low voltage polarization. This work provides a new choice and route for the design and preparation of lithiophilic host materials.

A Dendrite-Free Lithium-Metal Anode Enabled by Designed Ultrathin MgF2 Nanosheets Encapsulated Inside Nitrogen-Doped Graphene-Like Hollow Nanospheres

Uncontrolled lithium dendrite growth and dramatic volume change during cycling have long been severely impeding the practical applications of Li metal as the ultimate anode. In this work, ultrathin MgF₂ nanosheets encapsulated inside nitrogen-doped graphene-like hollow nanospheres (MgF₂ NSs@NGHSs) are ingeniously fabricated to address these problems by a perfect combination of atomic layer deposition and chemical vapor deposition. The uniform and continuous Li-Mg solid-solution inner layer formed by the MgF₂ nanosheets can reduce the nucleation overpotential and induce selective deposition of Li into the cavities of the NGHSs. Furthermore, the Li deposition behavior and mechanism of the hybrid host are comprehensively explored by in situ optical microscopy at the macroscopic level, in situ transmission electron microscopy at the microscopic level, and theoretical calculations at the atomic level, respectively. Benefiting from a synergistic modulation strategy of nanosheet seed-induced nucleation and Li-confined growth, the designed composite demonstrates an endurance of 590 cycles for asymmetric cells and a lifespan over 1330 h for corresponding symmetric cells. When applied in LiFePO₄ full cells, it provides a reversible capacity of 90.6 mAh g^-1 after 1000 cycles at 1 C.

Regulating Dendrite-Free Zinc Deposition by Red Phosphorous-Derived Artificial Protective Layer for Zinc Metal Batteries

Rational architecture design of the artificial protective layer on the zinc (Zn) anode surface is a promising strategy to achieve uniform Zn deposition and inhibit the uncontrolled growth of Zn dendrites. Herein, a red phosphorous-derived artificial protective layer combined with a conductive N-doped carbon framework is designed to achieve dendrite-free Zn deposition. The Zn-phosphorus (ZnP) solid solution alloy artificial protective layer is formed during Zn plating. Meanwhile, the dynamic evolution mechanism of the ZnP on the Zn anode is successfully revealed. The concentration gradient of the electrolyte on the electrode surface can be redistributed by this protective layer, thereby achieving a uniform Zn-ion flux. The fabricated Zn symmetrical battery delivers a dendrite-free plating/stripping for 1100 h at the current density of 2.0 mA cm-2 . Furthermore, aqueous Zn//MnO2 full cell exhibits a reversible capacity of 200 mAh g-1 after 350 cycles at 1.0 A g-1 . This study suggests an effective solution for the suppression of Zn dendrites in Zn metal batteries, which is expected to provide a deep insight into the design of high-performance rechargeable aqueous Zn-ion batteries.

Metal Hydrides with In Situ Built Electron/Ion Dual-Conductive Framework for Stable All-Solid-State Li-Ion Batteries

Due to their high theoretical specific capacity, metal hydrides are considered to be one of the most promising anode material for all-solid-state Li-ion batteries. Their practical application suffers, however, from the poor cycling stability and sluggish kinetics. Herein, we report the in situ fabrication of MgH₂ and Mg₂NiH₄ that are uniformly space-confined by inactive Nd₂H₅ frameworks with high Li-ion and electron conductivity through facile hydrogenation of single-phase Nd₄Mg₈₀Ni₈ alloys. The formation of MgH₂ and Mg₂NiH₄ nanocrystals could not only shorten Li-ion and electron diffusion pathways of the whole electrode but also relieve the induced stress upon volume changes. Additionally, the robust frameworks constructed by homogeneous distribution of inactive Nd₂H₅ based on a molecular level could effectively alleviate the volume expansion and phase separation of thus-confined MgH₂ and Mg₂NiH₄. More importantly, it is theoretically and experimentally verified that the uniform distribution of Nd₂H₅, which is an electronic conductor with a Li-ion diffusion barrier that is much lower than that of MgH₂ and Mg₂NiH₄, could further facilitate the electron and Li-ion transfer of MgH₂ and Mg₂NiH₄. Consequently, the space-confined MgH₂ and Mg₂NiH₄ deliver a reversible capacity of 997 mAh g^-1 at 2038 mA g^-1 after 100 cycles.

Facile synthesis of hierarchical MoS2/ZnS @ porous hollow carbon nanofibers for a stable Li metal anode

Lithium metal is considered as an ideal anode candidate for next generation Li battery systems since its high capacity, low density, and low working potential. However, the uncontrollable growth of Li dendrites and infinite volume expansion impede the commercialized applications of Li-metal anodes. In this work, we rationally designed and constructed a hierarchical porous hollow carbon nanofiber decorated with diverse metal sulfides (MS-ZS@PHC). This composite scaffold has three advantages: First, the synergistic effect of multiple-size lithiophilic phases (nano ZnS and micro MoS₂) can regulate Li ions nuclei and grow up homogenously on the scaffold. Second, the enlarged interplanar spacing of MoS₂ microsphere on the fibers can provide abundant channels for Li ions transportation. Third, the porous scaffold can confine the volume expansion of Li metal anode during cycling. Therefore, in a symmetrical cell, the MS-ZS@PHC host presents a homogenous Li plating/stripping behavior and runs steadily for 1100 h at 5 mA cm^-2 with a capacity of 5 mAh cm^-2 and even for 700 h at 10 mA cm^-2 with a capacity of 1 mAh cm^-2. A full cell using MS-ZS@PHC /Li composite as anode and coupled with LiFePO₄ as cathode delivers an excellent cyclic and rate performances.

Highly Strengthened and Toughened Zn-Li-Mn Alloys as Long-Cycling Life and Dendrite-Free Zn Anode for Aqueous Zinc-Ion Batteries

Zn-ion batteries (ZIBs) using aqueous electrolyte, recently, have been a hot topic owing to the high safety, low cost, and high specific energy capacity. However, the formation of dendrite and side reactions on the Zn anode during cycling inhibit the application of ZIBs. An advanced Zn anode by alloying a small amount of Li and Mn with Zn is hereby reported. It is found that Li and Mn can form cationic ions which restrain lateral diffusion of Zn ions and regulate zinc electrodeposition through the electrostatic shield mechanism. As a result, the formation of Zn dendrite is greatly inhibited. This process also mitigates the formation of Zn-based byproduct and Zn passivation. Consequently, the symmetric ZnLiMn/ZnLiMn cell presents a small overpotential of 30 mV at 1 mA cm^-2 , greatly enhanced cycling durability (1000 h at a current density of 1 mA cm^-2 ), and a dendrite-free morphology after cycles. Moreover, the authors find that the ZnLiMn alloy has greatly enhanced mechanical properties. The assembled ZnLiMn/MnO₂ full cell can retain 96% capacity after 400 cycles at 1 C. Thus, the alloying low-cost Li/Mn strategy is very promising for large-scale production of dendrite-free Zn electrode in rechargeable ZIBs.

Synthesis of Nitrogen-Doped KMn8 O16 with Oxygen Vacancy for Stable Zinc-Ion Batteries

The development of MnO₂ as a cathode for aqueous zinc-ion batteries (AZIBs) is severely limited by the low intrinsic electrical conductivity and unstable crystal structure. Herein, a multifunctional modification strategy is proposed to construct N-doped KMn₈ O₁₆ with abundant oxygen vacancy and large specific surface area (named as N-KMO) through a facile one-step hydrothermal approach. The synergetic effects of N-doping, oxygen vacancy, and porous structure in N-KMO can effectively suppress the dissolution of manganese ions, and promote ion diffusion and electron conduction. As a result, the N-KMO cathode exhibits dramatically improved stability and reaction kinetics, superior to the pristine MnO₂ and MnO₂ with only oxygen vacancy. Remarkably, the N-KMO cathode delivers a high reversible capacity of 262 mAh g^-1 after 2500 cycles at 1 A g^-1 with a capacity retention of 91%. Simultaneously, the highest specific capacity can reach 298 mAh g^-1 at 0.1 A g^-1 . Theoretical calculations reveal that the oxygen vacancy and N-doping can improve the electrical conductivity of MnO₂ and thus account for the outstanding rate performance. Moreover, ex situ characterizations indicate that the energy storage mechanism of the N-KMO cathode is mainly a H⁺ and Zn²⁺ co-insertion/extraction process.

Strategies and challenges of carbon materials in the practical applications of lithium metal anode: a review

Lithium (Li) metal is strongly considered to be the ultimate anode for next-generation high-energy-density rechargeable batteries. Carbon materials and their composites with excellent structure tunability and properties have shown great potential applications in Li metal anodes.

Formation of Super-Assembled TiOx /Zn/N-Doped Carbon Inverse Opal Towards Dendrite-Free Zn Anodes

Uncontrolled growth of Zn dendrites and side reactions are the major restrictions for the commercialization of Zn metal anodes. Herein, we develop a TiO_x /Zn/N-doped carbon inverse opal (denoted as TZNC IO) host to regulate the Zn deposition. Amorphous TiO_x and Zn/N-doped carbon can serve as the zincophilic nucleation sites to prevent the parasitic reactions. More importantly, the highly ordered IO host homogenizes the local current density and electric field to stabilize Zn deposition. Furthermore, the three-dimensional open networks could regulate Zn ion flux to enable stable cycling performance at large current densities. Owing to the abundant zincophilic sites and the open structure, granular Zn deposits could be realized. As expected, the TZNC IO host guarantees the steady Zn plating/stripping with a long-term stability over 450 h at the current density of 1 mA cm^-2 . As a proof-of-concept demonstration, a TZNC@Zn||V₂ O₅ full cell shows long lifespan over 2000 cycles at 5.0 A g^-1 .

Boosting the K+-adsorption capacity in edge-nitrogen doped hierarchically porous carbon spheres for ultrastable potassium ion battery anodes

Although carbon materials have great potential for potassium ion battery (KIB) anodes due to their structural stability and abundant carbon-containing resources, the limited K⁺-intercalated capacity impedes their extensive applications in energy storage devices. Current research studies focus on improving the surface-induced capacitive behavior to boost the potassium storage capacity of carbon materials. Herein, we designed edge-nitrogen (pyridinic-N and pyrrolic-N) doped carbon spheres with a hierarchically porous structure to achieve high potassium storage properties. The electrochemical tests confirmed that the edge-nitrogen induced active sites were conducive for the adsorption of K⁺, and the hierarchical porous structure promoted the generation of stable solid electrolyte interphase (SEI) films, both of which endow the resulting materials with a high reversible capacity of 381.7 mA h g^-1 at 0.1 A g^-1 over 200 cycles and an excellent rate capability of 178.2 mA h g^-1 at 5 A g^-1. Even at 5 A g^-1, the long-term cycling stability of 5000 cycles was achieved with a reversible capacity of 190.1 mA h g^-1. This work contributes to deeply understand the role of the synergistic effect of edge-nitrogen induced active sites and the hierarchical porous structure in the potassium storage performances of carbon materials.

In Situ Formed Lithiophilic LixNbyO in a Carbon Nanofiber Network for Dendrite-Free Li-Metal Anodes

Lithium metal is considered as a strongly attractive anode candidate for the high-energy-storage field, but its dreadful dendrite growth has haunted its commercialization progress. Herein, we develop a lithiophilic Nb₂O₅-embedded three-dimensional (3D) carbon nanofiber network (Nb₂O₅-CNF) as a scaffold to preload molten Li for the fabrication of dendrite-free composite anode. The in situ lithiation reaction between molten Li and Nb₂O₅ nanocrystals results in the formation of nanosize Li_xNb_yO nanoparticles, which can serve as preferred sites that regulate nucleation/growth behavior of Li during the plating process. Besides, due to its high structural stability and abundant internal inner space, the 3D CNF network can function as a reservoir to confine the dimensional expansion of "hostless Li". The resulting Li composite anodes exhibit enlarged active areas and reduced interfacial energy barriers, delivering a prolonged cycling of 1000 h with an ultralow hysteresis of 52 mV and dendrite-free morphology in a symmetric cell (1.0 mA cm^-2). Coupled with the LiFePO₄ cathode, the Li@Nb₂O₅-CNF anode sustains a reversible capacity of 163 mAh g^-1 with an excellent capacity retention of 93.0% after 370 cycles at 0.5C. This all-around strategy of lithiophilic sites coupled with a 3D conductive nanofiber matrix may shed light on promising applications of high-capacity and dendrite-free Li-metal batteries.

Regulating Li nucleation/growth via implanting lithiophilic seeds onto flexible scaffolds enables highly stable Li metal anode

Lithium (Li) metal is deemed as an ideal and promising star anode for high energy storage but its application still is impeded due to uncontrollable Li dendrite growth and tremendous dimension change. Although the flexible and conductive three-dimensional (3D) skeleton can improve the structural and interfacial stability of Li anode, its inherently lithiophobic feature usually brings a high nucleation barrier, uneven Li⁺ flux, and large concentration polarization, leading to inhomogeneous Li plating/stripping. Here, we develop target material (denoted as Mo₂C NPs@CC) consisting of well-distributed molybdenum carbide nanoparticles (Mo₂C NPs) with intrinsic lithiophilicity serving as lithiophilic seeds implanted onto the carbon cloth, breaking the dilemma of ordinary 3D conductive skeletons. The Mo₂C NPs with large Li absorption energy provide plentiful lithiophilic sites for guiding the uniform and thin Li-nuclei layer formation, thereby realizing flat Li growth and stable electrode/electrolyte interface. Moreover, the high electronic conductivity of Mo₂C-modified 3D scaffolds can balance the lithiophilicity, ensuring the fast electron transport in the whole electrode, effectively lowering the local current density, and providing enough space for buffering volume change, and synergistically suppresses the growth of Li dendrites. As a result, a prolonged lifespan of 5000 cycles with low voltage hysteresis of 10 mV at current density of 2 mA cm^-2 with area capacity (C_a) of 1 mA h cm^-2 has been achieved, giving rational guidance for designing high-performance composite Li anodes.

A Low-Strain Phosphate Cathode for High-Rate and Ultralong Cycle-Life Potassium-Ion Batteries

Most potassium-ion battery (PIB) cathode materials have deficient structural stability because of the huge radius of potassium ion, leading to inferior cycling performance. We report the controllable synthesis of a novel low-strain phosphate material K₃ (VO)(HV₂ O₃ )(PO₄ )₂ (HPO₄ ) (denoted KVP) nanorulers as an efficient cathode for PIBs. The as-synthesized KVP nanoruler cathode exhibits an initial reversible capacity of 80.6 mAh g^-1 under 20 mA g^-1 , with a large average working potential of 4.11 V. It also manifests an excellent rate property of 54.4 mAh g^-1 under 5 A g^-1 , with a high capacity preservation of 92.1 % over 2500 cycles. The outstanding potassium storage capability of KVP nanoruler cathode originates from a low-strain K⁺ uptake/removal mechanism, inherent semiconductor characteristic, and small K⁺ migration energy barrier. The high energy density and prolonged cyclic stability of KVP nanorulers//polyaniline-intercalated layered titanate full battery verifies the superiority of KVP nanoruler cathode in PIBs.

Molten Salt Electrochemical Modulation of Iron-Carbon-Nitrogen for Lithium-Sulfur Batteries

Sulfur hosts with rationally designed chemistry to confine and convert lithium polysulfides are of prime importance for high-performance lithium-sulfur batteries. A molten salt electrochemical modulation of iron-carbon-nitrogen is herein demonstrated as formation of hollow nitrogen-doped carbon with grafted Fe₃ C nanoparticles (Fe₃ C@C@Fe₃ C), which is rationalized as an excellent sulfur host for lithium-sulfur batteries. Fe₃ C over nitrogen-doped carbon contributes to enhanced adsorption and catalytic conversion of lithium polysulfides. The sulfur-loaded Fe₃ C@C@Fe₃ C electrodes hence show a high capacity, good cyclic stability, and enhanced rate performance. This work highlights the unique chemistry of metal carbides on facilitating adsorption-conversion process of lithium polysulfides, and also extends the scope of molten salt electrolysis to elaboration of energy materials.

Lattice-matching Ni-based scaffold with a spongy cover for uniform electric field against lithium dendrites

Herein, carbonized nickel metal organic framework scaffolds at nickel foam (CNS@NF) were fabricated to regulate Li-ion plating/stripping in lithium cells. CNS@NF would contribute to uniform Li nucleation and low overpotential due to the small lattice mismatch ratio and homogenous lithiophilic sites. Moreover, the spongy structure of the carbonized MOF can reduce the local current density by smoothening the sharp edges of NiO. Owing to these advantages, both the symmetric cells and full cells exhibited excellent electrochemical performance.

Dendrite-Free and Ultra-Long-Life Lithium Metal Anode Enabled via a Three-Dimensional Ordered Porous Nanostructure

Constructing a stable non-dendritic lithium metal anode is the key to the development of high-energy batteries in the future. Herein, we fabricated nitrogen-doped carbon photonic crystals in situ in the macropores of carbon papers as a porous skeleton and confined hosts for metallic lithium. The large specific surface area of the carbon photonic crystal reduces the current density of the electrode. The three-dimensional ordered microstructure promotes uniform charge distribution and uniform lithium deposition and inhibits the volume expansion of metallic lithium. The as-prepared lithium metal anode exhibits prominent electrochemical performance with a small hysteresis of less than 95 mV beyond 180 cycles at an extremely high current density of 15 mA cm^-2. When the as-prepared lithium metal anode is coupled with the sulfur cathode, the obtained full cell displays enhanced capacitive properties and cycle life. Compared with the bare Li anode, the full cell exhibits more than 300 cycles of cell life and a 70 mA h g^-1 higher discharge capacity.

Lotus-Root-Like Carbon Fibers Embedded with Ni-Co Nanoparticles for Dendrite-Free Lithium Metal Anodes

The growth of lithium (Li) dendrites and the huge volume change are the critical issues for the practical applications of Li-metal anodes. In this work, a spatial control strategy is proposed to address the above challenges using lotus-root-like Ni-Co hollow prisms@carbon fibers (NCH@CFs) as the host. The homogeneously distributed bimetallic Ni-Co particles on the N-doped carbon fibers serve as nucleation sites to effectively reduce the overpotential for Li nucleation. Furthermore, the 3D conductive network can alter the electric field. More importantly, the hierarchical lotus-root-like hollow fibers provide sufficient void space to withstand the volume expansion during Li deposition. These structural features guide the uniform Li nucleation and non-dendritic growth. As a result, the NCH@CFs host enables a very stable Li metal anode with a low voltage hysteresis during repeated Li plating/stripping for 1200 h at a current density of 1 mA cm^-2 .

Rational Design and Engineering of One-Dimensional Hollow Nanostructures for Efficient Electrochemical Energy Storage

The unique structural characteristics of one-dimensional (1D) hollow nanostructures result in intriguing physicochemical properties and wide applications, especially for electrochemical energy storage applications. In this Minireview, we give an overview of recent developments in the rational design and engineering of various kinds of 1D hollow nanostructures with well-designed architectures, structural/compositional complexity, controllable morphologies, and enhanced electrochemical properties for different kinds of electrochemical energy storage applications (i.e. lithium-ion batteries, sodium-ion batteries, lithium-sulfur batteries, lithium-selenium sulfur batteries, lithium metal anodes, metal-air batteries, supercapacitors). We conclude with prospects on some critical challenges and possible future research directions in this field. It is anticipated that further innovative studies on the structural and compositional design of functional 1D nanostructured electrodes for energy storage applications will be stimulated.

A highly stable lithium metal anode enabled by Ag nanoparticle-embedded nitrogen-doped carbon macroporous fibers

Lithium metal has been considered as an ideal anode candidate for future high energy density lithium batteries. Herein, we develop a three-dimensional (3D) hybrid host consisting of Ag nanoparticle-embedded nitrogen-doped carbon macroporous fibers (denoted as Ag@CMFs) with selective nucleation and targeted deposition of Li. The 3D macroporous framework can inhibit the formation of dendritic Li by capturing metallic Li in the matrix as well as reducing local current density, the lithiophilic nitrogen-doped carbons act as homogeneous nucleation sites owing to the small nucleation barrier, and the Ag nanoparticles improve the Li nucleation and growth behavior with the reversible solid solution-based alloying reaction. As a result, the Ag@CMF composite enables a dendrite-free Li plating/stripping behavior with high Coulombic efficiency for more than 500 cycles. When this anode is coupled with a commercial LiFePO₄ cathode, the assembled full cell manifests high rate capability and stable cycling life.