Methyl-beta-cyclodextrin-enhanced solubilization and aerobic biodegradation of polychlorinated biphenyls in two aged-contaminated soils

Microbial diversity assessment of polychlorinated biphenyl-contaminated soils and the biostimulation and bioaugmentation processes

The aim of this study was to know the biodiversity of total microorganisms contained in two polychlorinated biphenyl-contaminated aged soils and evaluate the strategies of bioaugmentation and biostimulation to biodegrade the biphenyls. Besides, the aerobic cultivable microorganisms were isolated and their capacity to biodegrade a commercial mixture of six congeners of biphenyls was evaluated. Biodiversity of contaminated soils was dominated by Actinobacteria (42.79%) and Firmicutes (42.32%) phyla, and others in smaller proportions such as Proteobacteria, Gemmatimonadetes, Chloroflexi, and Bacteroidetes. At the genus level, the majority of the population did not exceed 7% of relative abundance, including Bacillus, Achromobacter, Clostridium, and Pontibacter. Furthermore, four autochthonous bacterial cultures were possible isolates from the soils, which were identified by partial sequencing of the 16S rRNA gene, as Bacillus sp., Achromobacter sp., Pseudomonas stutzeri, and Bacillus subtilis, which were used for the bioaugmentation process. The bioaugmentation and biostimulation strategies achieved a biodegradation of about 60% of both soils after 8 weeks of the process; also, the four isolates were used as mixed culture to biodegrade a commercial mix of six polychlorinated biphenyl congeners; after 4 weeks of incubation, the concentration decreased from 0.5 mg/L to 0.23 mg/L.

Degradation kinetics of chlorpyrifos and diazinon in volcanic and non-volcanic soils: influence of cyclodextrins

The intensive use of insecticides such as chlorpyrifos (CPF) and diazinon (DZN) in the agricultural activities worldwide has produced contamination of soils and/or transport to non-target areas including their distribution to surface and groundwaters. Cyclodextrins (CDs) have been proposed as an alternative in remediation technologies based on the separation of contaminants from soils because they could allow a higher bioavailability for their degradation with a low environmental impact. In this work, the degradation pattern of CPF and DZN and the formation and dissipation of the major degradation products 3,5,6-trichloro-2-pyridinol (TCP) and 2-isopropyl-6-methyl-4-pyrimidinol (IMPH) was established in four agricultural volcanic and non-volcanic soils belonging to Andisol, Ultisol, and Mollisol orders. Both pesticides were highly adsorbed in these soils, consequently, with a greater probability of contaminating them. In contrast, the adsorption of their two main metabolites was low or null; therefore, they are potential groundwater contaminants. The degradation processes were studied in the natural and amended soils with β-cyclodextrin (β-CD) and methyl-β-cyclodextrin (Mβ-CD) for CPF and DZN, respectively. A slow degradation of CPF and DZN was obtained for volcanic soils with observable residues until the end of the incubation time (150-180 days). In Mollisols, the higher degradation rate of CPF was favored by the neutral to basic pH, and for DZN it was related to the lower adsorption and higher bioavailability. The amendment of soils with CDs produced slower degradation rates which led to a greater concentration of the compounds at the end of the incubation time. This effect was more pronounced for DZN. The exception was the Andisol, with no significant changes for both compounds regarding the unamended soil. No residues of TCP were observed for this soil in both conditions during the whole incubation time; nevertheless, the accumulation of TCP was significant in the Ultisol and Mollisols, but the concentrations were lower for the amended soils. The accumulation of IMPH was important in Mollisol amended soils; however, their residues were observed in the volcanic soils during the whole incubation period in the natural and amended soils. An important enhancement of the microbial activity occurred in the system β-CD/CPF in Mollisols, without a more effective degradation of the insecticide. The opposite effect was observed in the system Mβ-CD/DZN mainly in the oxidative activity in all soils. The higher degradation of DZN and IMPH in natural Mollisols was related to the higher hydrolytic and oxidative activities. The stability of the inclusion complexes formed could play an important role for explaining the results obtained with the amendments.

Advances and perspective in bioremediation of polychlorinated biphenyl-contaminated soils

In recent years, microbial degradation and bioremediation approaches of polychlorinated biphenyls (PCBs) have been studied extensively considering their toxicity, carcinogenicity and persistency potential in the environment. In this direction, different catabolic enzymes have been identified and reported for biodegradation of different PCB congeners along with optimization of biological processes. A genome analysis of PCB-degrading bacteria has led in an improved understanding of their metabolic potential and adaptation to stressful conditions. However, many stones in this area are left unturned. For example, the role and diversity of uncultivable microbes in PCB degradation are still not fully understood. Improved knowledge and understanding on this front will open up new avenues for improved bioremediation technologies which will bring economic, environmental and societal benefits. This article highlights on recent advances in bioremediation of PCBs in soil. It is demonstrated that bioremediation is the most effective and innovative technology which includes biostimulation, bioaugmentation, phytoremediation and rhizoremediation and acts as a model solution for pollution abatement. More recently, transgenic plants and genetically modified microorganisms have proved to be revolutionary in the bioremediation of PCBs. Additionally, other important aspects such as pretreatment using chemical/physical agents for enhanced biodegradation are also addressed. Efforts have been made to identify challenges, research gaps and necessary approaches which in future, can be harnessed for successful use of bioremediation under field conditions. Emphases have been given on the quality/efficiency of bioremediation technology and its related cost which determines its ultimate acceptability.

Metagenomic Analysis of a Biphenyl-Degrading Soil Bacterial Consortium Reveals the Metabolic Roles of Specific Populations

Polychlorinated biphenyls (PCBs) are widespread persistent pollutants that cause several adverse health effects. Aerobic bioremediation of PCBs involves the activity of either one bacterial species or a microbial consortium. Using multiple species will enhance the range of PCB congeners co-metabolized since different PCB-degrading microorganisms exhibit different substrate specificity. We have isolated a bacterial consortium by successive enrichment culture using biphenyl (analog of PCBs) as the sole carbon and energy source. This consortium is able to grow on biphenyl, benzoate, and protocatechuate. Whole-community DNA extracted from the consortium was used to analyze biodiversity by Illumina sequencing of a 16S rRNA gene amplicon library and to determine the metagenome by whole-genome shotgun Illumina sequencing. Biodiversity analysis shows that the consortium consists of 24 operational taxonomic units (≥97% identity). The consortium is dominated by strains belonging to the genus Pseudomonas, but also contains betaproteobacteria and Rhodococcus strains. whole-genome shotgun (WGS) analysis resulted in contigs containing 78.3 Mbp of sequenced DNA, representing around 65% of the expected DNA in the consortium. Bioinformatic analysis of this metagenome has identified the genes encoding the enzymes implicated in three pathways for the conversion of biphenyl to benzoate and five pathways from benzoate to tricarboxylic acid (TCA) cycle intermediates, allowing us to model the whole biodegradation network. By genus assignment of coding sequences, we have also been able to determine that the three biphenyl to benzoate pathways are carried out by Rhodococcus strains. In turn, strains belonging to Pseudomonas and Bordetella are the main responsible of three of the benzoate to TCA pathways while the benzoate conversion into TCA cycle intermediates via benzoyl-CoA and the catechol meta-cleavage pathways are carried out by beta proteobacteria belonging to genera such as Achromobacter and Variovorax. We have isolated a Rhodococcus strain WAY2 from the consortium which contains the genes encoding the three biphenyl to benzoate pathways indicating that this strain is responsible for all the biphenyl to benzoate transformations. The presented results show that metagenomic analysis of consortia allows the identification of bacteria active in biodegradation processes and the assignment of specific reactions and pathways to specific bacterial groups.

Recent advances on iron oxide magnetic nanoparticles as sorbents of organic pollutants in water and wastewater treatment

The constant growth in population worldwide over the past decades continues to put forward the need to provide access to safe, clean water to meet human needs. There is a need for cost-effective technologies for water and wastewater treatment that can meet the global demands and the rigorous water quality standards and at the same maximizing pollutant efficiency removal. Current remediation technologies have failed in keeping up with these factors without becoming cost-prohibitive. Most recently, nanotechnology has been sought as the best alternative to increase access to water supplies by remediating those already contaminated and offering ways to access unconventional sources. The use of iron oxide magnetic nanoparticles as nanoadsorbents has led way to a new class of magnetic separation strategies for water treatment. This review focuses on highlighting some of the most recent advances in core-shell iron oxide magnetic nanoparticles and nanocomposites containing iron oxide nanoparticles currently being developed for water and wastewater treatment of organic pollutants. We discuss the novelty of these novel materials and the insight gained from their advances that can help develop cost-effective reusable technologies for scale-up and commercial use.

Effects of RAMEB and/or mechanical mixing on the bioavailability and biodegradation of PCBs in soil/slurry

Microbial remediation is preferred as a clean and cost-effective method for restoring environments polluted by organics. But the biodegradation rates of hydrophobic organic contaminants (HOCs) are usually extremely restricted by their low bioavailability, especially in soil. Here, a physical method (mechanical mixing) and a chemical method (randomly methylated-β-cyclodextrins, RAMEB) were adopted to improve the bioavailability and biodegradation of polychlorinated biphenyls (PCBs) of an aged soil. The bioavailability of tri-CBs was increased by adding RAMEB in soil/slurry or assisting mechanical mixing in slurry, but these methods had no effects on the bioavailability of tetra-CBs and high chlorinated PCBs (Cl > 4). The degradation rate of tri-CBs could be obviously enhanced by adding RAMEB in soil or assisting mechanical mixing in slurry. The highest removal amount of tri-CBs reached 43.8% in 100 d with a first-order decay kinetics constant of 0.0059 d(-1). But the removal of tetra-CBs and high chlorinated PCBs (Cl > 4) were not significant in all mesocosms, possibly due to the lack or weakness of the native degrading microflora. Based on the analysis of the richness and diversity of bacterial communities, the characteristics of the heatmap and the variation of bphC copy numbers in the soil/slurry mesocosms, it could be inferred that there was no obvious corresponding relationship between the variation of the bacterial communities and the physical/chemical measures.

Regional analysis of potential polychlorinated biphenyl degrading bacterial strains from China

Polychlorinated biphenyls (PCBs), the chlorinated derivatives of biphenyl, are one of the most prevalent, highly toxic and persistent groups of contaminants in the environment. The objective of this study was to investigate the biodegradation of PCBs in northeastern (Heilongjiang Province), northern (Shanxi Province) and eastern China (Shanghai municipality). From these areas, nine soil samples were screened for PCB-degrading bacteria using a functional complementarity method. The genomic 16S rDNA locus was amplified and the products were sequenced to identify the bacterial genera. Seven Pseudomonas strains were selected to compare the capacity of bacteria from different regions to degrade biphenyl by HPLC. Compared to the biphenyl content in controls of 100%, the biphenyl content went down to 3.7% for strain P9-324, 36.3% for P2-11, and 20.0% for the other five strains. These results indicate that a longer processing time led to more degradation of biphenyl. PCB-degrading bacterial strains are distributed differently in different regions of China.

Ex-Situ Remediation Technologies for Environmental Pollutants: A Critical Perspective

Pollution and the global health impacts from toxic environmental pollutants are presently of great concern. At present, more than 100 million people are at risk from exposure to a plethora of toxic organic and inorganic pollutants. This review is an exploration of the ex-situ technologies for cleaning-up the contaminated soil, groundwater and air emissions, highlighting their principles, advantages, deficiencies and the knowledge gaps. Challenges and strategies for removing different types of contaminants, mainly heavy metals and priority organic pollutants, are also described.

Metaproteomics and metabolomics analyses of chronically petroleum-polluted sites reveal the importance of general anaerobic processes uncoupled with degradation

Crude oil is one of the most important natural assets for humankind, yet it is a major environmental pollutant, notably in marine environments. One of the largest crude oil polluted areas in the word is the semi-enclosed Mediterranean Sea, in which the metabolic potential of indigenous microbial populations towards the large-scale chronic pollution is yet to be defined, particularly in anaerobic and micro-aerophilic sites. Here, we provide an insight into the microbial metabolism in sediments from three chronically polluted marine sites along the coastline of Italy: the Priolo oil terminal/refinery site (near Siracuse, Sicily), harbour of Messina (Sicily) and shipwreck of MT Haven (near Genoa). Using shotgun metaproteomics and community metabolomics approaches, the presence of 651 microbial proteins and 4776 metabolite mass features have been detected in these three environments, revealing a high metabolic heterogeneity between the investigated sites. The proteomes displayed the prevalence of anaerobic metabolisms that were not directly related with petroleum biodegradation, indicating that in the absence of oxygen, biodegradation is significantly suppressed. This suppression was also suggested by examining the metabolome patterns. The proteome analysis further highlighted the metabolic coupling between methylotrophs and sulphate reducers in oxygen-depleted petroleum-polluted sediments.

Bacterial population and biodegradation potential in chronically crude oil-contaminated marine sediments are strongly linked to temperature

Two of the largest crude oil-polluted areas in the world are the semi-enclosed Mediterranean and Red Seas, but the effect of chronic pollution remains incompletely understood on a large scale. We compared the influence of environmental and geographical constraints and anthropogenic forces (hydrocarbon input) on bacterial communities in eight geographically separated oil-polluted sites along the coastlines of the Mediterranean and Red Seas. The differences in community compositions and their biodegradation potential were primarily associated (P < 0.05) with both temperature and chemical diversity. Furthermore, we observed a link between temperature and chemical and biological diversity that was stronger in chronically polluted sites than in pristine ones where accidental oil spills occurred. We propose that low temperature increases bacterial richness while decreasing catabolic diversity and that chronic pollution promotes catabolic diversification. Our results further suggest that the bacterial populations in chronically polluted sites may respond more promptly in degrading petroleum after accidental oil spills.

Bioremediation trial on aged PCB-polluted soils--a bench study in Iceland

Polychlorinated biphenyls (PCBs) pose a threat to the environment due to their high adsorption capacity to soil organic matter, stability and low reactivity, low water solubility, toxicity and ability to bioaccumulate. With Icelandic soils, research on contamination issues has been very limited and no data has been reported either on PCB degradation potential or rate. The goals of this research were to assess the bioavailability of aged PCBs in the soils of the old North Atlantic Treaty Organization facility in Keflavík, Iceland and to find the best biostimulation method to decrease the pollution. The effectiveness of different biostimulation additives (N fertiliser, white clover and pine needles) at different temperatures (10 and 30 °C) and oxygen levels (aerobic and anaerobic) were tested. PCB bioavailability to soil fauna was assessed with earthworms (Eisenia foetida). PCBs were bioavailable to earthworms (bioaccumulation factor 0.89 and 0.82 for earthworms in 12.5 ppm PCB soil and in 25 ppm PCB soil, respectively), with less chlorinated congeners showing higher bioaccumulation factors than highly chlorinated congeners. Biostimulation with pine needles at 10 °C under aerobic conditions resulted in nearly 38 % degradation of total PCBs after 2 months of incubation. Detection of the aerobic PCB degrading bphA gene supports the indigenous capability of the soils to aerobically degrade PCBs. Further research on field scale biostimulation trials with pine needles in cold environments is recommended in order to optimise the method for onsite remediation.

Tenax extraction for exploring rate-limiting factors in methyl-β-cyclodextrin enhanced anaerobic biodegradation of PAHs under denitrifying conditions in a red paddy soil

The effectiveness of anaerobic bioremediation systems for PAH-contaminated soil may be constrained by low contaminants bioaccessibility due to limited aqueous solubility and lack of suitable electron acceptors. Information on what is the rate-limiting factor in bioremediation process is of vital importance in the decision in what measures can be taken to assist the biodegradation efficacy. In the present study, four different microcosms were set to study the effect of methyl-β-cyclodextrin (MCD) and nitrate addition (N) on PAHs biodegradation under anaerobic conditions in a red paddy soil. Meanwhile, sequential Tenax extraction combined with a first-three-compartment model was employed to evaluate the rate-limiting factors in MCD enhanced anaerobic biodegradation of PAHs. Microcosms with both 1% (w/w) MCD and 20mM N addition produced maximum biodegradation of total PAHs of up to 61.7%. It appears rate-limiting factors vary with microcosms: low activity of degrading microorganisms is the vital rate-limiting factor for control and MCD addition treatments (CK and M treatments); and lack of bioaccessible PAHs is the main rate-limiting factor for nitrate addition treatments (N and MN treatments). These results have practical implications for site risk assessment and cleanup strategies.

Influence of solubilizing agents (cyclodextrin or surfactant) on phenanthrene degradation by electro-Fenton process--study of soil washing recycling possibilities and environmental impact

One of the aims in soil washing treatment is to reuse the extracting agent and to remove the pollutant in the meantime. Thus, electro-Fenton (EF) degradation of synthetic soil washing solutions heavily loaded with phenanthrene was suggested for the first time. Two solubilising agents hydroxypropyl-beta-cyclodextrin (HPCD) and Tween 80(®) (TW 80) were chosen as cyclodextrin (CD) and surfactant representatives, respectively. In order to reuse HPCD and to degrade the pollutant simultaneously, the following optimal parameters were determined: [Fe(2+)] = 0.05 mM (catalyst), I = 2000 mA, and natural solution pH (around 6), without any adjustment. Only 50% of TW 80 (still higher than the critical micelle concentration (CMC)) can be reused against 90% in the case of HPCD while phenanthrene is completely degraded in the meantime, after only 180 min of treatment. This can be explained by the ternary complex formation (Fe(2+)-HPCD-organic pollutant) (equilibrium constant K = 56 mM(-1)) that allows OH to directly degrade the contaminant. This confirms that Fe(2+) plays an important role as a catalyst since it can promote formation of hydroxyl radicals near the pollutant and minimize HPCD degradation. After 2 h of treatment, HPCD/phenanthrene solution got better biodegradability (BOD5/COD = 0.1) and lower toxicity (80% inhibition of luminescence of Vibrio fischeri bacteria) than TW 80/phenanthrene (BOD5/COD = 0.08; 99% inhibition of V. fischeri bacteria). According to these data, HPCD employed in this integrated (soil washing + EF degradation) approach gave promising results in order to be reused whereas the pollutant is degraded in the meanwhile.

Mathematical model for cyclodextrin alteration of bioavailability of organic pollutants

While many cyclodextrin-based applications have been developed to assess or enhance bioavailability of organic pollutants, the choice of cyclodextrin (CD) is largely empirical, with little consideration of pollutant diversity and environmental matrix effects. This study aimed at developing a mathematical model for quantifying CD alteration of bioavailability of organic pollutants. Cyclodextrin appears to have multiple effects, together contributing to its bioavailability-enhancing property. Cyclodextrin is adsorbed onto the adsorbent matrix to different extents. The adsorbed CD is capable of sequestrating organic pollutants, highlighting the role of a pseudophase similar to solid environmental matrix. Aqueous CD can reduce adsorption of organic pollutants via inclusion complexation. The two effects cancel each other to a certain degree, which determines the levels of organic pollutants dissolved (comprising freely dissolved and CD-included forms). Additionally, the CD-included form is nearly identical in biological activity to the free form. A mathematical model of one variable (i.e., CD concentration) was derived to quantify effects of CD on the bioavailability of organic pollutants. Model analysis indicates that alteration of bioavailability of organic pollutants by CD depends on both CD (type and level) and environmental matrix. The selection of CD type and amendment level for a given application may be predicted by the model.

Remediation of polycyclic aromatic hydrocarbon and metal-contaminated soil by successive methyl-β-cyclodextrin-enhanced soil washing-microbial augmentation: a laboratory evaluation

Polycyclic aromatic hydrocarbon (PAH) and metal-polluted sites caused by abandoned coking plants are receiving wide attention. To address the associated environmental concerns, innovative remediation technologies are urgently needed. This study was initiated to investigate the feasibility of a cleanup strategy that employed an initial phase, using methyl-β-cyclodextrin (MCD) solution to enhance ex situ soil washing for extracting PAHs and metals simultaneously, followed by the addition of PAH-degrading bacteria (Paracoccus sp. strain HPD-2) and supplemental nutrients to treat the residual soil-bound PAHs. Elevated temperature (50 °C) in combination with ultrasonication (35 kHz, 30 min) at 100 g MCD L(-1) was effective in extracting PAHs and metals to assist soil washing; 93 % of total PAHs, 72 % of Cd, 78 % of Ni, 93 % of Zn, 84 % of Cr, and 68 % of Pb were removed from soil after three successive washing cycles. Treating the residual soil-bound PAHs for 20 weeks led to maximum biodegradation rates of 34, 45, 36, and 32 % of the remaining total PAHs, 3-ring PAHs, 4-ring PAHs, and 5(+6)-ring PAHs after washing procedure, respectively. Based on BIOLOG Ecoplate assay, the combined treatment at least partially restored microbiological functions in the contaminated soil. The ex situ cleanup strategy through MCD-enhanced soil washing followed by microbial augmentation can be effective in remediating PAH and metal-contaminated soil.

Bioaugmentation of a historically contaminated soil by polychlorinated biphenyls with Lentinus tigrinus

BACKGROUND

Several species belonging to the ecological group of white-rot basidiomycetes are able to bring about the remediation of matrices contaminated by a large variety of anthropic organic pollutants. Among them, polychlorobiphenyls (PCBs) are characterized by a high recalcitrance due to both their low bioavailability and the inability of natural microbial communities to degrade them at significant rates and extents. Objective of this study was to assess the impact of a maize stalk-immobilized Lentinus tigrinus CBS 577.79 inoculant combined with soybean oil (SO), as a possible PCB-mobilizing agent, on the bioremediation and resident microbiota of an actual Aroclor 1260 historically contaminated soil under unsaturated solid-phase conditions.

RESULTS

Best overall PCB depletions (33.6 ± 0.3%) and dechlorination (23.2 ± 1.3%) were found after 60 d incubation in the absence of SO where, however, the fungus appeared to exert adverse effects on both the growth of biphenyl- and chlorobenzoate-degrading bacteria and the abundance of genes coding for both biphenyl dioxygenase (bph) and catechol-2,3-dioxygenase. A significant (P < 0.001) linear inverse relationship between depletion yields and degree of chlorination was observed in both augmented and control microcosms in the absence of SO; conversely, this negative correlation was not evident in SO-amended microcosms where the additive inhibited the biodegradation of low chlorinated congeners. The presence of SO, in fact, resulted in lower abundances of both biphenyl-degrading bacteria and bph.

CONCLUSIONS

The PCB depletion extents obtained in the presence of L. tigrinus are by far higher than those reported in other remediation studies conducted under unsaturated solid phase conditions on actual site soils historically contaminated by Aroclor 1260. These results suggest that the bioaugmentation strategy with the maize stalk-immobilized mycelium of this species might be promising in the reclamation of PCB-contaminated soils. The addition of SO to matrices contaminated by technical PCB mixtures, such as Aroclor 1242 and Delor 103 and characterized by a large preponderance of low chlorinated congeners, might not be advisable.

Bioavailability of xenobiotics in the soil environment

It is often presumed that all chemicals in soil are available to microorganisms, plant roots, and soil fauna via dermal exposure. Subsequent bioaccumulation through the food chain may then result in exposure to higher organisms. Using the presumption of total availability, national governments reduce environmental threshold levels of regulated chemicals by increasing guideline safety margins. However, evidence shows that chemical residues in the soil environment are not always bioavailable. Hence, actual chemical exposure levels of biota are much less than concentrations present in soil would suggest. Because "bioavailability" conveys meaning that combines implications of chemical sol persistency, efficacy, and toxicity, insights on the magnitude of a chemicals soil bioavailability is valuable. however, soil bioavailability of chemicals is a complex topic, and is affected by chemical properties, soil properties, species exposed, climate, and interaction processes. In this review, the state-of-art scientific basis for bioavailability is addressed. Key points covered include: definition, factors affecting bioavailability, equations governing key transport and distributive kinetics, and primary methods for estimating bioavailability. Primary transport mechanisms in living organisms, critical to an understanding of bioavailability, also presage the review. Transport of lipophilic chemicals occurs mainly by passive diffusion for all microorganisms, plants, and soil fauna. Therefore, the distribution of a chemical between organisms and soil (bioavailable proportion) follows partition equilibrium theory. However, a chemical's bioavailability does not always follow partition equilibrium theory because of other interactions with soil, such as soil sorption, hysteretic desorption, effects of surfactants in pore water, formation of "bound residue", etc. Bioassays for estimating chemical bioavailability have been introduced with several targeted endpoints: microbial degradation, uptake by higher plants and soil fauna, and toxicity to organisms. However, there bioassays are often time consuming and laborious. Thus, mild extraction methods have been employed to estimate bioavailability of chemicals. Mild methods include sequential extraction using alcohols, hexane/water, supercritical fluids (carbon dioxide), aqueous hydroxypropyl-beta-cyclodextrin extraction, polymeric TENAX beads extraction, and poly(dimethylsiloxane)-coated solid-phase microextraction. It should be noted that mild extraction methods may predict bioavailability at the moment when measurements are carried out, but not the changes in bioavailability that may occur over time. Simulation models are needed to estimate better bioavailability as a function of exposure time. In the past, models have progressed significantly by addressing each group of organisms separately: microbial degradation, plant uptake via evapotranspiration processes, and uptake of soil fauna in their habitat. This approach has been used primarily because of wide differences in the physiology and behaviors of such disparate organisms. However, improvement of models is badly needed, Particularly to describe uptake processes by plant and animals that impinge on bioavailability. Although models are required to describe all important factors that may affect chemical bioavailability to individual organisms over time (e.g., sorption/desorption to soil/sediment, volatilization, dissolution, aging, "bound residue" formation, biodegradation, etc.), these models should be simplified, when possible, to limit the number of parameters to the practical minimum. Although significant scientific progress has been made in understanding the complexities in specific methodologies dedicated to determining bioavailability, no method has yet emerged to characterized bioavailability across a wide range of chemicals, organisms, and soils/sediments. The primary aim in studying bioavailability is to define options for addressing bioremediation or environmental toxicity (risk assessment), and that is unlikely to change. Because of its importance in estimating research is needed to more comprehensively address the key environmental issue of "bioavailability of chemicals in soil/sediment."

Benzo[a]pyrene degradation using simultaneously combined chemical oxidation, biotreatment with Fusarium solani and cyclodextrins

The interest of simultaneously combining chemical (Fenton's reaction) and biological treatments for the degradation of a high molecular weight polycyclic aromatic hydrocarbon benzo[a]pyrene (BaP) has been studied in laboratory tests. An optimal concentration of 1.5x10(-3) M H(2)O(2) as Fenton's reagent was firstly determined as being compatible with the growth of Fusarium solani, the Deuteromycete fungus used in the biodegradation process. For the enhancement of BaP solubilisation, cyclodextrins were also used in the performed tests. The best degradation performance was achieved through the use of 5x10(-3) M hydroxypropyl-beta-cyclodextrin (HPBCD) in comparison with randomly methylated-beta-cyclodextrin (RAMEB). When Fenton's treatment was combined with biodegradation, a beneficial effect on BaP degradation (25%) was obtained in comparison with biodegradation alone (8%) or with chemical oxidation alone (16%) in the presence of HPBCD for 12 days of incubation.

Sustainable decontamination of an actual-site aged PCB-polluted soil through a biosurfactant-based washing followed by a photocatalytic treatment

A two phases process consisting of a soya lecithin (SL)-based soil washing process followed by the photocatalytic treatment of resulting effluents was developed and applied at the laboratory scale in the remediation of an actual-site soil historically contaminated by 0.65 g/kg of polychlorinated biphenyls (PCBs). Triton X-100 (TX) was employed in the same process as a control surfactant. SL and TX, both applied as 2.25 g/L aqueous solutions, displayed a comparable ability to remove PCBs from the soil. However, SL solution displayed a lower ecotoxicity, a lower ability to mobilize soil constituents and a higher soil detoxification capacity with respect to the TX one. The photocatalytic treatment resulted in marked depletions (from 50% to 70%) of total organic carbon (TOC) and PCBs initially occurring in the SL and TX contaminated effluents. Despite the ability of SL to adversely affect the rate of TOC and PCB photodegradation, higher PCB depletion and dechlorination yields along with lower increases of ecotoxicity were observed in SL-containing effluents with respect to the TX ones at the end of 15 days of treatment. The two phases process developed and tested for the first time in this study seems to have the required features to become, after a proper optimization and scale up, a challenging procedure for the sustainable remediation of actual site, poorly biotreatable PCB-contaminated soils.

Development of an innovative soil remediation: "Cyclodextrin-enhanced combined technology"

This paper introduces an in situ "Cyclodextrin-enhanced soil bioremediation technology" which is a combination of 1. in situ bioventilation for biodegradation in the unsaturated soil zone; 2. physico-chemical treatment of the pumped ground water; 3. impulsive flushing for the three-phase soil. For enhancement of biodegradation and solubilization randomly methylated beta-cyclodextrin (RAMEB) was used. An additional aim of this study was to prove the importance of the technology monitoring which was used for characterisation of the soil processes by an integrated methodology. It consists of physico-chemical, biological and ecotoxicological methods specific for the contaminants. For technology monitoring the mobile soil phases--soil gas and ground water--were analysed. Sampling of the whole soil was carried out at the start and end of the technology application. RAMEB resulted in the enhanced removal of pollutants both from the saturated and unsaturated soil zones. Moreover, the biodegradation was more effective than the pump and treat technology, proved by the establishment of the carbon material balance in all soil phases.

A review on slurry bioreactors for bioremediation of soils and sediments

The aim of this work is to present a critical review on slurry bioreactors (SB) and their application to bioremediation of soils and sediments polluted with recalcitrant and toxic compounds. The scope of the review encompasses the following subjects: (i) process fundamentals of SB and analysis of advantages and disadvantages; (ii) the most recent applications of SB to laboratory scale and commercial scale soil bioremediation, with a focus on pesticides, explosives, polynuclear aromatic hydrocarbons, and chlorinated organic pollutants; (iii) trends on the use of surfactants to improve availability of contaminants and supplementation with degradable carbon sources to enhance cometabolism of pollutants; (iv) recent findings on the utilization of electron acceptors other than oxygen; (v) bioaugmentation and advances made on characterization of microbial communities of SB; (vi) developments on ecotoxicity assays aimed at evaluating bioremediation efficiency of the process.From this review it can be concluded that SB is an effective ad situ and ex situ technology that can be used for bioremediation of problematic sites, such as those characterized by soils with high contents of clay and organic matter, by pollutants that are recalcitrant, toxic, and display hysteretic behavior, or when bioremediation should be accomplished in short times under the pressure and monitoring of environmental agencies and regulators. SB technology allows for the convenient manipulation and control of several environmental parameters that could lead to enhanced and faster treatment of polluted soils: nutrient N, P and organic carbon source (biostimulation), inocula (bioaugmentation), increased availability of pollutants by use of surfactants or inducing biosurfactant production inside the SB, etc. An interesting emerging area is the use of SB with simultaneous electron acceptors, which has demonstrated its usefulness for the bioremediation of soils polluted with hydrocarbons and some organochlorinated compounds. Characterization studies of microbial communities of SB are still in the early stages, in spite of their significance for improving reactor operation and design optimization.We have identified the following niches of research needs for SB in the near and mid term future, inter alia: (i) application of SB with sequential and simultaneous electron acceptors to soils polluted with contaminants other than hydrocarbons (i.e., pesticides, explosives, etc.), (ii) evaluation of the technical feasibility of triphasic SB that use innocuous solvents to help desorbing pollutants strongly attached to soils, and in turn, to enhance their biodegradation, (iii) gaining deeper insight of microbial communities present in SB with the intensified application of molecular biology tools such as PCR-DGGE, PCR-TGGE, ARDRA, etc., (iv) development of more representative ecotoxicological assays to better assess the effectiveness of a given bioremediation process.

Simultaneous mobilization of heavy metals and polychlorinated biphenyl (PCB) compounds from soil with cyclodextrin and EDTA in admixture

This study evaluated the efficacy of a washing process with cyclodextrin in combination with ethylenediaminetetraacetate (EDTA) for the simultaneous mobilization of heavy metals and PCBs from a field contaminated soil. Ultrasonically aided mixing of the field contaminated soil with a combination of cyclodextrin solution (10%, w/v) and a sparing quantity (2 mmol) of EDTA, simultaneously mobilized appreciable quantities of PCBs and much of the analyte metal (Cd, Cr, Cu, Mn, Ni, Pb, Zn) burdens. Relative to the action of individual reagents, a combination of randomly methylated (RAMEB) or hydroxypropyl beta-cyclodextrin (HPCD) with EDTA did not alter the PCB extraction efficiency nor did the presence of cyclodextrin change the efficiency of mobilization of most heavy metals (Al, Cd, Cr, Fe, Mn, Ni, and Zn) but did increase the recovery of Cu and Pb modestly. Three sonication-washes with the same charge of reagents mobilized appreciable quantities of PCBs (40-76%) and quantitatively extracted the labile fraction of Cd, Cu, Mn, and Pb. RAMEB proved to be more efficient than HPCD for PCB extractions. Three successive extractions with a single charge of cyclodextrin mobilized almost as much PCB (RAMEB, 76%; HPCD, 40%) as did the companion extractions that used fresh reagents each time (RAMEB, 78%; HPCD, 42%). Collectively, these studies demonstrated that PCB compounds and selected heavy metals can be co-extracted efficiently from soil with three successive washes with the same washing suspension containing EDTA and cyclodextrin.

Linking organic pollutant (bio)availability with geosorbent properties and biomimetic methodology: a review of geosorbent characterisation and (bio)availability prediction

The interdependent link between structure and physico-chemical properties of geosorbents and sorption activity of hydrophobic organic pollutants (HOC) upon interaction with solid matrices has been established. The conclusions derived from these investigations have not been actively incorporated into risk assessment and remediation protocols since legislators prefer to adopt a conservative approach when the potential of contaminants to be released from soil matrices are evaluated. With the advent of spectroscopic techniques, it is possible to determine the molecular properties of the geosorbent organic matter which play a pivotal role in HOC retention. Physical-chemical and biological methods are employed to predict the potential for HOC release from sorbent matrices. This article serves as a review discussing the literature and reports the progress that has been made in these particular areas. The implication of employing molecular descriptor factors correlated with a biomimetic method to assess availability and risk is also considered.

Intensification of the aerobic bioremediation of an actual site soil historically contaminated by polychlorinated biphenyls (PCBs) through bioaugmentation with a non acclimated, complex source of microorganisms

Background

The biotreatability of actual-site polychlorinated biphenyl (PCB)-contaminated soils is often limited by their poor content of autochthonous pollutant-degrading microorganisms. In such cases, inoculation might be the solution for a successful bioremediation. Some pure and mixed cultures of characterized PCB degrading bacteria have been tested to this purpose. However, several failures have been recorded mostly due to the inability of inoculated microbes to compete with autochthonous microflora and to face the toxicity and the scarcity of nutrients occurring in the contaminated biotope. Complex microbial systems, such as compost or sludge, normally consisting of a large variety of robust microorganisms and essential nutrients, would have better chances to succeed in colonizing degraded contaminated soils. However, such sources of microorganisms have been poorly applied in soil bioremediation and in particular in the biotreatment of soil with PCBs. Thus, in this study the effects of Enzyveba, i.e. a consortium of non-adapted microorganisms developed from composted material, on the slurry- and solid-phase aerobic bioremediation of an actual-site, aged PCB-contaminated soil were studied.

Results

A slow and only partial biodegradation of low-chlorinated biphenyls, along with a moderate depletion of initial soil ecotoxicity, were observed in the not-inoculated reactors. Enzyveba significantly increased the availability and the persistence of aerobic PCB- and chlorobenzoic acid-degrading cultivable bacteria in the bioreactors, in particular during the earlier phase of treatment. It also markedly enhanced PCB-biodegradation rate and extent (from 50 to 100%) as well as the final soil detoxification, in particular under slurry-phase conditions. Taken together, data obtained suggest that Enzyveba enhanced the biotreatability of the selected soil by providing exogenous bacteria and fungi able to remove inhibitory or toxic intermediates of PCB biodegradation and/or exogenous nutrients able to sustain microorganisms in charge for PCB mineralization.

Conclusion

Enzyveba appears a promising agent for bioaugmenting actual-site PCB-polluted soils with a native low content of indigenous specialized microflora. This not only for its positive effects on the soil biotreatability but also for its availability on the market at a relatively low cost.

Influence of citric acid amendments on the availability of weathered PCBs to plant and earthworm species

A series of small and large pot trials were conducted to assess the phytoextraction potential of several plant species for weathered polychlorinated biphenyls (PCBs) in soil (105 microg/g Arochlor 1268). In addition, the effect of citric acid on PCB bioavailability to both plants and earthworms was assessed. Under small pot conditions (one plant, 400 g soil), three cucurbits (Cucurbita pepo ssp pepo [zucchini] and ssp ovifera [nonzucchini summer squash], Cucumis sativus, cucumber) accumulated up to 270 microg PCB/g in the roots and 14 microg/g in the stems, resulting in 0.10% contaminant removal from soil. Periodic 1 mM subsurface amendments of citric acid increased the stem and leaf PCB concentration by 330 and 600%, respectively, and resulted in up to a 65% increase in the total amount of contaminant removed from soil. Although citric acid at 10 mM more than doubled the amount of PCB desorbed in abiotic batch slurries, contaminant accumulation by two earthworm species (Eisenia foetida and Lumbricus terrestris) was unaffected by citric acid at 1 and 10 mM and ranged from 11-15 microg/g. Two large pot trials were conducted in which cucurbits (C. pepo ssp pepo and ssp ovifera, C. sativus) and white lupin (Lupinus albus) were grown in 70 kg of PCB-contaminated soil White lupin was the poorest accumulator of PCBs, with approximately 20 microg/g in the roots and 1 microg/g in the stems. Both C. pepo ssp ovifera (summer squash) and C. sativus (cucumber) accumulated approximately 65-100 microg/g in the roots and 6-10 microg/g in the stems. C. pepo ssp pepo (zucchini) accumulated significantly greater levels of PCB than all other species, with 430 microg/g in the roots and 22 microg/g in the stems. The mechanism by which C. pepo spp pepo extracts and translocates weathered PCBs is unknown, but confirms earlier findings on the phytoextraction of other weathered persistent organic pollutants such as chlordane, p,p'-DDE, and polycyclic aromatic hydrocarbons.

Development and assessment of an innovative soil-washing process based on the use of cholic acid-derivatives as pollutant-mobilizing agents

Surfactant-aided soil washing is often proposed for the restoration of aged organic pollutant-contaminated soils. As many of commercial surfactants have been found to be toxic and recalcitrant, the opportunity to use in this process cheap, non-toxic, and biodegradable pollutant-mobilizing agents, such as deoxycholic acid (DA), bovine bile (BB), and the residue resulting from DA extraction from BB (BBR), was studied in this work. A soil historically contaminated by chlorinated anilines and benzenes, thiophenes, and several polycyclic aromatic hydrocarbons was suspended at 15% w/v and washed in water or water amended at 1.0% (w/v) with DA, BB, BBR, or Triton X-100 (TX). The resulting effluents were supplemented with nutrients and subjected to aerobic bioremediation. The biogenic agents enhanced the water pollutant elution potential by 230/440%. TX enhanced the same parameter by about 540%; however, it mediated a lower depletion of the initial soil ecotoxicity and a more extensive mobilization of soil constituents with respect to the biogenic agents. Furthermore, TX adversely affected the biotreatability of resulting effluents, by adversely affecting the growth of cultivable bacterial biomass and the structure of eubacterial community of the effluent. On the contrary, the biogenic agents, and in particular DA and BB, enhanced the effluents bioremediation, by sustaining the growth and increasing the complexity of the effluent eubacterial communities. Thus, DA and BB are very promising additives for an effective and environmental friendly soil washing treatment of aged (chloro)organics contaminated soils.

Biodegradation of cyclodextrins in soil

Cyclodextrins, especially random methylated betaCD (RAMEB) and hydroxypropyl betaCD (HPbetaCD), are becoming common enhancing additives in the bioremediation of soils formerly contaminated by hydrocarbons and/or other poorly bioavailable organic pollutants. Therefore, their degradation in the soil, particularly the most persistent RAMEB, has been of great concern. Like oil contaminants, these additives should be biodegradable via an environmentally safe technology. Hence, in this paper, the biodegradability of eight different cyclodextrins (CDs) in four different soils was examined under various treatment conditions in laboratory and pilot scale field experiments. This paper is the first report on the potential biological fate of CDs studied under a large variety of environmental conditions and in different soil ecosystems. Data on the potential relationship between CD biodegradation and the biological removal of hydrocarbons in the CD-amended contaminated soils are also given. All CDs were found to be more or less biodegradable; even the most persistent RAMEB was depleted from soils under favourable conditions. In the field experiments, the depletion of RAMEB to about 40% of its initial level was observed for a period of 2 years in hydrocarbon-contaminated soils of high organic matter and cell concentration.

Influence of hydroxypropyl-beta-cyclodextrin (HPCD) on the bioavailability and biodegradation of pyrene

It is well known that the limited aqueous solubilities of polycyclic aromatic hydrocarbons (PAH) often reduce their bioavailability to bacterial populations. The objective of this study was to test the impact of a solubility-enhancement reagent, hydroxypropyl-beta-cyclodextrin (HPCD), on the bioavailability and biodegradation of pyrene. No measurable loss of pyrene occurred for the control vials throughout the first 22 weeks of the experiment, indicating the absence of mass loss via abiotic transformation and volatilization. The vials containing pyrene and the degrader isolate (Burkholderia CRE 7), but no HPCD, also exhibited no measurable loss of pyrene throughout the experiment. Conversely, biodegradation of pyrene appears to have been initiated after approximately 15 weeks for the vials containing 10(4) mg l(-1) HPCD. By the end of the experiment, approximately 14% (w/w) of the pyrene was biodegraded in the presence of HPCD. These results indicate that HPCD may be useful for enhancing the bioavailability and biodegradation of pyrene and other PAHs.

T-RFLP analysis of bacterial communities in cyclodextrin-amended bioreactors developed for biodegradation of polychlorinated biphenyls

In this study, T-RFLP analysis was used to determine the structure and spatial distribution of the indigenous bacterial community of an actual-site PCB-contaminated soil treated in aerobic packed-bed loop reactors (PBLRs) in the absence or in the presence of a mixture of randomly methylated beta-cyclodextrins (RAMEB) at 0.5 or 1% w/w. RAMEB was found to significantly enhance the aerobic bioremediation of soil with effects that increased proportionally with the concentration at which it was applied. At the end of treatment (180 days), T-RFLP analysis of the soil samples collected from the top and bottom regions of the PBLRs showed a series of 50 single T-RFs. Remarkably, the number of T-RFs was significantly lower (13-22) in samples collected from different sections of the RAMEB-amended bioreactors with respect to equivalent samples collected from the RAMEB-free reactor. Cluster analysis based on the presence or the absence of T-RFs peaks revealed high similarity, inside each reactor, between the top and bottom parts of its soil bed. Soil samples collected at the top and bottom regions of the two bioreactors amended with RAMEB, clustered together while the equivalent samples of the bioreactor without RAMEB formed a separate cluster which was distantly related to the soil samples obtained from the parallel amended bioreactor. Notably, T-RFLP analyses combined with extensive sequencing of 16S rDNA allowed us to tentatively allocate a series of bacterial species corresponding to specific peaks of the T-RFLP profiles and to determine their phylogenetic affiliation.

Enhanced biodegradation of transformer oil in soils with cyclodextrin ? from the laboratory to the field

The use cyclodextrins for the intensification of bioremediation by improving the mobility and bioavailability of contaminants has recently been studied. In this work, the role of randomly methylated beta-cyclodextrin in the bioremediation of soils contaminated with transformer oil was studied both in bench scale bioreactors and through field experiments. The aims of this research were to (a) establish the scientific background of a cyclodextrin-based soil bioremediation technology, (b) demonstrate its feasibility and effectiveness in the field, and (c) develop an integrated methodology, consisting of a combination of physical, chemical, biological and ecotoxicological analytical methods, for efficiently monitoring the technology performances. The stepwise increasing scale of the experiments and the application of the integrated analytical methodology supported the development of a scientifically established new technology and the identification of the advantages and the limitations of its application in the field. At each phase of the study, randomly methylated beta-cyclodextrin was found to significantly enhance the bioremediation and detoxification of the transformer oil-contaminated soils employed by increasing the bioavailability of the pollutants and the activity of indigenous microorganisms.

Effects of cyclodextrins, humic substances, and rhamnolipids on the washing of a historically contaminated soil and on the aerobic bioremediation of the resulting effluents

Nontoxic and biodegradable pollutant-mobilizing agents, instead of chemical surfactants, were tested in the washing of an actual-site chloroaromatic-contaminated soil. A soil historically contaminated by chlorinated anilines and benzenes, thiophenes and several polycyclic aromatic hydrocarbons was subjected to washing by suspending it (15% w/v) in water or in water with 1.0% (w/v) beta-clodextrin (beta-CD), hydroxypropyl-beta-cyclodextrin (HP-beta-CD), rhamnolipid (RL), dissolved humic substances (HS), or Triton X-100 (TX) in shaken batch reactors for 24 hr. The resulting wastewaters were amended with nutrients and treated aerobically in shaken reactors for 65 days. The biogenic agents markedly enhanced (by 237%, beta-CD; 265%, HP-beta-CD; 400%, RL; 566%, HS) the capability of water of eluting organic pollutants from the soil. TX enhanced the overall pollutant removal by about 660%; however, a lower depletion of the initial soil ecotoxicity, along with a more extensive impact on the soil organic matter, was observed. Furthermore, TX adversely affected the bioremediation of the resulting effluent by apparently inducing a premature decrease of specialized bacterial biomass. By contrast, the biogenic agents, and in particular HS and RL, sustained the biodegradation and dechlorination of pollutants by apparently enhancing the availability of specialized bacteria in the reactors. Thus, the biogenic agents proposed here seem to be promising nontoxic and nonaggressive soil washing agents for the integrated physicochemical (washing) and biological (aerobic posttreatment) restoration of poorly bioremediable (chloro) organics-contaminated soils.

Effect of randomly methylated beta-cyclodextrin on physical properties of soils

The application of cyclodextrins in several soil remediation technologies has been increasingly studied, but little is known about their effects on soil physical properties. One of the popular soil remediation additives, randomly methylated beta-cyclodextrin (RAMEB), was found to significantly alter surface and pore properties of soil clay minerals. Therefore, in this paper we studied the effect of various RAMEB doses on physical properties of selected soils, representing a wide range of clay content (3-49%). The results showed that soil physical properties were greatly modified by RAMEB treatment. Analysis of water vapor adsorption isotherms revealed that RAMEB increased water adsorption and surface area in sandy soils and decreased them in clayey soils. An increase in adsorption energy of water in RAMEB-treated soils indicated that desorption of nonpolar pollutants can be enhanced. Water vapor desorption isotherms showed that the volumes and radii of micropores (nanometers range) increased above 1% RAMEB concentration. The micropores became more rough and complex after RAMEB treatment as deduced from an increase in fractal dimensions. The volume of soil mesopores measured by mercury intrusion porosimetry (micrometers range) gradually decreased in most soils with an increase in RAMEB concentration whereas the average mesopore radius increased, indicating that finer mesopores were blocked by RAMEB. Measurements of the granulometric composition of soils by sedimentation analysis showed that the amount of coarse-size soil fractions increased on the expense of finer fractions due to aggregation of smaller particles. Behavior of the studied soils after RAMEB treatment depended on their clay content and the dose of cyclodextrin. In clay-rich soils, strong interactions of cyclodextrins with the soil solid phase governed the resulting soil properties. In clay-poor soils, the cyclodextrin excess (not interacted with clays) played a dominant role. Modification of surface, pore, and aggregation properties of soils by RAMEB can have a significant effect in soil remediation technologies.