Xer-mediated site-specific recombination at cer generates Holliday junctions in vivo

The Site-Specific Recombination System of the Escherichia coli Bacteriophage Φ24B

Stx bacteriophages are members of the lambdoid group of phages and are responsible for Shiga toxin (Stx) production and the dissemination of Shiga toxin genes (stx) across shigatoxigenic Escherichia coli (STEC). These toxigenic bacteriophage hosts can cause life-threatening illnesses, and Stx is the virulence determinant responsible for the severe nature of infection with enterohemorrhagic E. coli, a subset of pathogenic STEC. Stx phages are temperate, and in the present study, the identification of what is actually required for Stx phage Φ24_B and bacterial DNA recombination was tested using both in vitro and in situ recombination assays. It is well established that phage λ, which underpins most of what we understand about lambdoid phage biology, requires its own encoded phage attachment site (attP) of 250 bp, a host-encoded attachment site (attB) of 21 bp, and a host-encoded DNA binding protein known as integration host factor (IHF). The assays applied in this study enabled the manipulation of the phage attachment site (attP) and the bacterial attachment site (attB) sequences and the inclusion or exclusion of a host-encoded accessory element known as integration host factor. We were able to demonstrate that the minimal attP sequence required by Φ24_B phage is between 350 and 427 bp. Unlike phage λ, the minimal necessary flanking sequences for the attB site do not appear to be equal in size, with a total length between 62 and 93 bp. Furthermore, we identified that the Φ24_B integrase does not require IHF to drive the integration and the recombination process. Understanding how this unusual Stx phage integrase works may enable exploitation of its promiscuous nature in the context of genetic engineering.

Xer Site-Specific Recombination: Promoting Vertical and Horizontal Transmission of Genetic Information

Two related tyrosine recombinases, XerC and XerD, are encoded in the genome of most bacteria where they serve to resolve dimers of circular chromosomes by the addition of a crossover at a specific site, dif. From a structural and biochemical point of view they belong to the Cre resolvase family of tyrosine recombinases. Correspondingly, they are exploited for the resolution of multimers of numerous plasmids. In addition, they are exploited by mobile DNA elements to integrate into the genome of their host. Exploitation of Xer is likely to be advantageous to mobile elements because the conservation of the Xer recombinases and of the sequence of their chromosomal target should permit a quite easy extension of their host range. However, it requires means to overcome the cellular mechanisms that normally restrict recombination to dif sites harbored by a chromosome dimer and, in the case of integrative mobile elements, to convert dedicated tyrosine resolvases into integrases.

Resolution of Multimeric Forms of Circular Plasmids and Chromosomes

One of the disadvantages of circular plasmids and chromosomes is their high sensitivity to rearrangements caused by homologous recombination. Odd numbers of crossing-over occurring during or after replication of a circular replicon result in the formation of a dimeric molecule in which the two copies of the replicon are fused. If they are not converted back to monomers, the dimers of replicons may fail to correctly segregate at the time of cell division. Resolution of multimeric forms of circular plasmids and chromosomes is mediated by site-specific recombination, and the enzymes that catalyze this type of reaction fall into two families of proteins: the serine and tyrosine recombinase families. Here we give an overview of the variety of site-specific resolution systems found on circular plasmids and chromosomes.

Genetic analysis of maintenance of pEC156, a naturally occurring Escherichia coli plasmid that carries genes of the EcoVIII restriction-modification system

In the present study the role of the mechanisms responsible for maintenance of a natural plasmid pEC156, that carries genes of the EcoVIII restriction-modification system was investigated. Analysis of this plasmid's genetic content revealed the presence of genetic determinants suggesting two such mechanisms. The first of them relies on site specific recombination utilizing the Xer/cer molecular machinery, while the second involves a restriction-modification system as an addiction module. Our analysis indicated that three factors affect the maintenance of pEC156: (i) a cis-acting cer site involved in resolution of plasmid multimers, (ii) a gene coding for EcoVIII endonuclease, and (iii) plasmid copy number control. The lowest stability was observed with pEC156 derivatives deprived of the cer site. Decreased stability of pEC156 derivatives was also observed in E.coli strains deficient in genes coding for proteins involved in plasmid multimer resolution (XerC, XerD, ArgR and PepA). A similar effect, but to a much lesser extent was observed for the pEC156 derivative without a functional gene coding for EcoVIII endonuclease. Our results indicate that the presence of the cer site is more important for pEC156 stable maintenance than the presence of a functional gene coding for EcoVIII endonuclease. In our work we also tested maintenance of pEC156 possessing a ColE1-type replicon in bacteria belonging to Enterobacteriaceae family. We have found that pEC156 was most stably maintained in Enterobacter cloacae and Klebsiella oxytoca representing coli-type enterobacteria. We have found that in all enterobacteria tested pEC156 derivatives deficient in the cer site were significantly less stably maintained than cer(+) variants.

Interaction of branch migration translocases with the Holliday junction-resolving enzyme and their implications in Holliday junction resolution

Double-strand break repair involves the formation of Holliday junction (HJ) structures that need to be resolved to promote correct replication and chromosomal segregation. The molecular mechanisms of HJ branch migration and/or resolution are poorly characterized in Firmicutes. Genetic evidence suggested that the absence of the RuvAB branch migration translocase and the RecU HJ resolvase is synthetically lethal in Bacillus subtilis, whereas a recU recG mutant was viable. In vitro RecU, which is restricted to bacteria of the Firmicutes phylum, binds HJs with high affinity. In this work we found that RecU does not bind simultaneously with RecG to a HJ. RuvB by interacting with RecU bound to the central region of HJ DNA, loses its nonspecific association with DNA, and re-localizes with RecU to form a ternary complex. RecU cannot stimulate the ATPase or branch migration activity of RuvB. The presence of RuvB·ATPγS greatly stimulates RecU-mediated HJ resolution, but the addition of ATP or RuvA abolishes this stimulatory effect. A RecU·HJ·RuvAB complex might be formed. RecU does not increase the RuvAB activities but slightly inhibits them.

The Xer/dif site-specific recombination system of Campylobacter jejuni

Chromosome dimers, which form during the bacterial life cycle, represent a problem that must be solved by the bacterial cell machinery so that chromosome segregation can occur effectively. The Xer/dif site-specific recombination system, utilized by most bacteria, resolves chromosome dimers into monomers using two tyrosine recombinases, XerC and XerD, to perform the recombination reaction at the dif site which consists of 28-30 bp. However, single Xer recombinase systems have been recently discovered in several bacterial species. In Streptococci and Lactococci a single recombinase, XerS, is capable of completing the monomerisation reaction by acting at an atypical dif site called dif SL (31 bp). It was recently shown that a subgroup of ε-proteobacteria including Campylobacter spp. and Helicobacter spp. had a phylogenetically distinct Xer/dif recombination system with only one recombinase (XerH) and an atypical dif motif (difH). In order to biochemically characterize this system in greater detail, Campylobacter jejuni XerH was purified and its DNA-binding activity was characterized. The protein showed specific binding to the complete difH site and to both halves separately. It was also shown to form covalent complexes with difH suicide substrates. In addition, XerH was able to catalyse recombination between two difH sites located on a plasmid in Escherichia coli in vivo. This indicates that this XerH protein performs a similar function as the related XerS protein, but shows significantly different binding characteristics.

Characterization of the Holliday junction resolving enzyme encoded by the Bacillus subtilis bacteriophage SPP1

Recombination-dependent DNA replication, which is a central component of viral replication restart, is poorly understood in Firmicutes bacteriophages. Phage SPP1 initiates unidirectional theta DNA replication from a discrete replication origin (oriL), and when replication progresses, the fork might stall by the binding of the origin binding protein G38P to the late replication origin (oriR). Replication restart is dependent on viral recombination proteins to synthesize a linear head-to-tail concatemer, which is the substrate for viral DNA packaging. To identify new functions involved in this process, uncharacterized genes from phage SPP1 were analyzed. Immediately after infection, SPP1 transcribes a number of genes involved in recombination and replication from P_E2 and P_E3 promoters. Resequencing the region corresponding to the last two hypothetical genes transcribed from the P_E2 operon (genes 44 and 45) showed that they are in fact a single gene, re-annotated here as gene 44, that encodes a single polypeptide, named gene 44 product (G44P, 27.5 kDa). G44P shares a low but significant degree of identity in its C-terminal region with virus-encoded RusA-like resolvases. The data presented here demonstrate that G44P, which is a dimer in solution, binds with high affinity but without sequence specificity to several double-stranded DNA recombination intermediates. G44P preferentially cleaves Holliday junctions, but also, with lower efficiency, replicated D-loops. It also partially complemented the loss of RecU resolvase activity in B. subtilis cells. These in vitro and in vivo data suggest a role for G44P in replication restart during the transition to concatemeric viral replication.

FtsK DNA translocase: the fast motor that knows where it's going

FtsK is a double-stranded DNA translocase, a motor that converts the chemical energy of binding and hydrolysing ATP into movement of a DNA substrate. It moves DNA at an amazing rate->5000 bp per second-and is powerful enough to remove other proteins from the DNA. In bacteria it is localised to the site of cell division, the septum, where it functions as a DNA pump at the late stages of the cell cycle, to expedite cytokinesis and chromosome segregation. The N terminus of the protein is involved in the cell-cycle-specific localisation and assembly of the cell-division machinery, whereas the C terminus forms the motor. The motor portion of FtsK has been studied by a combination of biochemistry, genetics, X-ray crystallography and single-molecule mechanical assays, and these will be the focus here. The motor can be divided into three subdomains: α, β and γ. The α and β domains multimerise to produce a hexameric ring with a central channel for dsDNA, and contain a RecA-like nucleotide-binding/hydrolysis fold. The motor is given directionality by the regulatory γ domain, which binds to polarised chromosomal sequences-5'-GGGNAGGG-3', known as KOPS-to ensure that the motor is loaded onto DNA in a specific orientation such that subsequent translocation is always towards the region of the chromosome where replication usually terminates (the terminus), and specifically to the 28 bp dif site, located in this region. Once the FtsK translocase has located the dif site it then interacts with the XerCD site-specific recombinases to activate recombination.

Overlapping roles for Yen1 and Mus81 in cellular Holliday junction processing

Eukaryotic Holliday junction (HJ) resolvases have attracted much attention recently with the identification of at least three distinct proteins that can cleave model HJs in vitro. However, the specific DNA structure(s) that these proteins act upon in the cell is unknown. Here, we describe a system in budding yeast to directly and quantitatively monitor in vivo HJ resolution. We found that Yen1 acts redundantly with Mus81, but not Slx1, to resolve a model HJ in vivo. This functional overlap specifically extends to the repair/bypass of lesions that impede the progression of replication forks but not to the repair of double-strand breaks induced by ionizing radiation. Together, these results suggest a direct role for Yen1 in the response to DNA damage and implicate overlapping HJ resolution functions of Yen1 with Mus81 during replication fork repair.

Control of directionality in the DNA strand-exchange reaction catalysed by the tyrosine recombinase TnpI

In DNA site-specific recombination catalysed by tyrosine recombinases, two pairs of DNA strands are sequentially exchanged between separate duplexes and the mechanisms that confer directionality to this theoretically reversible reaction remain unclear. The tyrosine recombinase TnpI acts at the internal resolution site (IRS) of the transposon Tn4430 to resolve intermolecular transposition products. Recombination is catalysed at the IRS core sites (IR1–IR2) and is regulated by adjacent TnpI-binding motifs (DR1 and DR2). These are dispensable accessory sequences that confer resolution selectivity to the reaction by stimulating synapsis between directly repeated IRSs. Here, we show that formation of the DR1–DR2-containing synapse imposes a specific order of activation of the TnpI catalytic subunits in the complex so that the IR1-bound subunits catalyse the first strand exchange and the IR2-bound subunits the second strand exchange. This ordered pathway was demonstrated for a complete recombination reaction using a TnpI catalytic mutant (TnpI-H234L) partially defective in DNA rejoining. The presence of the DR1- and DR2-bound TnpI subunits was also found to stabilize transient recombination intermediates, further displacing the reaction equilibrium towards product formation. Implication of TnpI/IRS accessory elements in the initial architecture of the synapse and subsequent conformational changes taking place during strand exchange is discussed.

Homology-dependent interactions determine the order of strand exchange by IntDOT recombinase

The Bacteroides conjugative transposon CTnDOT encodes an integrase, IntDOT, which is a member of the tyrosine recombinase family. Other members of this group share a strict requirement for sequence identity within the region of strand exchange, called the overlap region. Tyrosine recombinases catalyze recombination by making an initial cleavage, strand exchange and ligation, followed by strand swapping isomerization requiring sequence identity in the overlap region, followed by the second cleavage, strand exchange and ligation. IntDOT is of particular interest because it has been shown to utilize a three-step mechanism: a sequence identity-dependent initial strand exchange that requires two base pairs of complementary DNA at the site of cleavage; a sequence identity-independent strand swapping isomerization, followed by a sequence identity-independent cleavage, strand exchange and ligation. In addition to the sequence identity requirement in the overlap region, Lambda Int interactions with arm-type sites dictate the order of strand exchange regardless of the orientation of the overlap region. Although IntDOT has an arm-binding domain, we show here that the location of sequence identity within the overlap region dictates where the initial cleavage takes place and that IntDOT can recombine substrates containing mismatches in the overlap region so long as a single base of sequence identity exists at the site of initial cleavage.

Challenging a paradigm: the role of DNA homology in tyrosine recombinase reactions

A classical feature of the tyrosine recombinase family of proteins catalyzing site-specific recombination, as exemplified by the phage lambda integrase and the Cre and Flp recombinases, is the ability to recombine substrates sharing very limited DNA sequence identity. Decades of research have established the importance of this short stretch of identity within the core regions of the substrates. Since then, several new enzymes that challenge this paradigm have been discovered and require the role of sequence identity in site-specific recombination to be reconsidered. The integrases of the conjugative transposons such as Tn916, Tn1545, and CTnDOT recombine substrates with heterologous core sequences. The integrase of the mobilizable transposon NBU1 performs recombination more efficiently with certain core mismatches. The integration of CTX phage and capture of gene cassettes by integrons also occur by altered mechanisms. In these systems, recombination occurs between mismatched sequences by a single strand exchange. In this review, we discuss literature that led to the formulation of the current strand-swapping isomerization model for tyrosine recombinases. The review then focuses on recent developments on the recombinases that challenged the paradigm that was derived from the studies of early systems.

mwr Xer site-specific recombination is hypersensitive to DNA supercoiling

The multiresistance plasmid pJHCMW1, first identified in a Klebsiella pneumoniae strain isolated from a neonate with meningitis, includes a Xer recombination site, mwr, with unique characteristics. Efficiency of resolution of mwr-containing plasmid dimers is strongly dependent on the osmotic pressure of the growth medium. An increase in supercoiling density of plasmid DNA was observed as the osmotic pressure of the growth culture decreased. Reporter plasmids containing directly repeated mwr, or the related cer sites were used to test if DNA topological changes were correlated with significant changes in efficiency of Xer recombination. Quantification of Holliday junctions showed that while recombination at cer was efficient at all levels of negative supercoiling, recombination at mwr became markedly less efficient as the level of supercoiling was reduced. These results support a model in which modifications at the level of supercoiling density caused by changes in the osmotic pressure of the culture medium affects resolution of mwr-containing plasmid dimers, a property that separates mwr from other Xer recombination target sites.

Putative Functional Domains of Human Cytomegalovirus pUL56 Involved in Dimerization and Benzimidazole D-Ribonucleoside Activity

Background

Benzimidazole d-ribonucleosides inhibit DNA packaging during human cytomegalovirus (HCMV) replication. Although they have been shown to target pUL56 and pUL89 (the large and small subunits of the HCMV terminase, respectively) their mechanism of action is not yet fully understood. We aimed here to better understand HCMV DNA maturation and the mechanism of action of benzimidazole derivatives.

Methods

The HCMV pUL56 protein was studied by sequence analysis of the HCMV UL56 gene and herpesvirus counterparts combined with primary structure analysis of the corresponding amino acid sequences.

Results

The UL56 sequence analysis of 45 HCMV strains and counterparts among herpesviruses allowed the identification of 12 conserved regions. Moreover, comparison with the product of gene 49 (gp49) of bacteriophage T4 suggested that the pUL56 zinc finger is localized close to the dimerization site of pUL56, providing a spatial organization of the catalytic site that allows recognition and cleavage of DNA.

Conclusions

This study provides a basis to investigate the mechanism of concatemeric DNA cleavage and a biochemical basis for DNA packaging inhibition by benzimidazole derivatives.

DNA sequence heterogeneity in Fim tyrosine-integrase recombinase-binding elements and functional motif asymmetries determine the directionality of the fim genetic switch in Escherichia coli K-12

Phase-variable expression of type 1 fimbriae in Escherichia coli K-12 involves inversion by site-specific recombination of a 314 bp sequence containing the promoter for fim structural gene expression. The invertible sequence is flanked by 9 bp inverted repeats, and each repeat is in turn flanked by non-identical recombinase-binding elements (RBEs) to which the FimB or FimE site-specific recombinases bind. These proteins have distinct DNA inversion preferences: FimB inverts the switch in the ON-to-OFF and OFF-to-ON directions with similar efficiencies, whereas FimE inverts it predominantly in the ON-to-OFF direction. We have found that FimB and FimE invert the switch through a common mechanism. A genetic investigation involving base-by-base substitution combined with a biochemical study shows that the same DNA cleavage and religation sites are used within the 9 bp inverted repeats, and that each recombination involves a common 3 bp spacer region. A comprehensive programme of RBE exchanges and replacements reveals that FimB is much more tolerant of RBE sequence variation than FimE. The asymmetric location of conserved 5'-CA motifs at either side of each spacer region allows the inside and outside of the switch to be differentiated while the RBE sequence heterogeneity permits its ON and OFF forms to be distinguished by the recombinases.

CTnDOT integrase performs ordered homology-dependent and homology-independent strand exchanges

Although the integrase (IntDOT) of the Bacteroides conjugative transposon CTnDOT has been classified as a member of the tyrosine recombinase family, the reaction it catalyzes appears to differ in some features from reactions catalyzed by other tyrosine recombinases. We tested the ability of IntDOT to cleave and ligate activated attDOT substrates in the presence of mismatches. Unlike other tyrosine recombinases, the results revealed that IntDOT is able to perform ligation reactions even when all the bases within the crossover region are mispaired. We also show that there is a strong bias in the order of strand exchanges during integrative recombination. The top strands are exchanged first in reactions that appear to require 2 bp of homology between the partner sites adjacent to the sites of cleavage. The bottom strands are exchanged next in reactions that do not require homology between the partner sites. This mode of coordination of strand exchanges is unique among tyrosine recombinases.

Direct and random routing of a molecular motor protein at a DNA junction

With the aim of investigating how motor proteins negotiate DNA nanostructures, we produced test circuits based on recombination intermediates in which 1D translocation across a Holliday junction (HJ) could be assessed by subsequent triplex displacement signals on each DNA arm. Using the EcoR124I restriction-modification enzyme, a 3′–5′ double-strand DNA (dsDNA) translocase, we could show that the motor will tend to follow its translocated strand across a junction. Nonetheless, as the frequency of junction bypass events increases, the motor will occasionally jump tracks.

Differences in resolution of mwr-containing plasmid dimers mediated by the Klebsiella pneumoniae and Escherichia coli XerC recombinases: potential implications in dissemination of antibiotic resistance genes

Xer-mediated dimer resolution at the mwr site of the multiresistance plasmid pJHCMW1 is osmoregulated in Escherichia coli containing either the Escherichia coli Xer recombination machinery or Xer recombination elements from K. pneumoniae. In the presence of K. pneumoniae XerC (XerC(Kp)), the efficiency of recombination is lower than that in the presence of the E. coli XerC (XerC(Ec)) and the level of dimer resolution is insufficient to stabilize the plasmid, even at low osmolarity. This lower efficiency of recombination at mwr is observed in the presence of E. coli or K. pneumoniae XerD proteins. Mutagenesis experiments identified a region near the N terminus of XerC(Kp) responsible for the lower level of recombination catalyzed by XerC(Kp) at mwr. This region encompasses the second half of the predicted alpha-helix B and the beginning of the predicted alpha-helix C. The efficiencies of recombination at other sites such as dif or cer in the presence of XerC(Kp) or XerC(Ec) are comparable. Therefore, XerC(Kp) is an active recombinase whose action is impaired on the mwr recombination site. This characteristic may result in restriction of the host range of plasmids carrying this site, a phenomenon that may have important implications in the dissemination of antibiotic resistance genes.

Preferential synapsis of loxP sites drives ordered strand exchange in Cre-loxP site-specific recombination

The bacteriophage P1 Cre recombinase catalyzes site-specific recombination between 34-base-pair loxP sequences in a variety of topological contexts. This reaction is widely used to manipulate DNA molecules in applications ranging from benchtop cloning to genome modifications in transgenic animals. Despite the simple, highly symmetric nature of the Cre-loxP system, there is strong evidence that the reaction is asymmetric; the 'bottom' strands in the recombining loxP sites are preferentially exchanged before the 'top' strands. Here, we address the mechanistic basis for ordered strand exchange in the Cre-loxP recombination pathway. Using suicide substrates containing 5'-bridging phosphorothioate linkages at both cleavage sites, fluorescence resonance energy transfer between synapsed loxP sites and a Cre mutant that can cleave the bridging phosphorothioate linkage but not a normal phosphodiester linkage, we showed that preferential formation of a specific synaptic complex between loxP sites imposes ordered strand exchange during recombination and that synapsis stimulates cleavage of loxP sites.

Characterization of XerC- and XerD-dependent CTX phage integration in Vibrio cholerae

CTXphi is a filamentous bacteriophage that encodes cholera toxin and integrates site-specifically into the larger of the two Vibrio cholerae chromosomes. The CTXphi genome lacks an integrase; instead, its integration depends on the chromosome-encoded tyrosine recombinases XerC and XerD. During integration, recombination occurs between regions of homology in CTXphi and the V. cholerae chromosome. Here, we define the elements on the phage genome (attP) and bacterial chromosome (attB) required for CTXphi integration. attB is a short sequence composed of one binding site for XerC and XerD spanning the site of recombination. Together, XerC and XerD bind to two sites within attP. While one XerC/D binding site in attP spans the core recombination region, the other site is approximately 80 bp away. Although integration occurs at the core XerC/D binding site in attP, the second site is required for CTXphi integration, suggesting it performs an architectural role in the integration reaction. In vitro cleavage reactions showed that XerC and XerD are capable of cleaving attB and attP sequences; however, additional cellular processes such as DNA replication or Holliday junction resolution by a host resolvase may contribute to integration in vivo.

Tangle Analysis of Xer Recombination Reveals only Three Solutions, all Consistent with a Single Three-dimensional Topological Pathway

The product of Xer recombination at directly repeated psi sites on a circular unknotted DNA molecule is a right-hand four-noded catenane. Here, we use tangle equations to analyze the topological changes associated with Xer recombination at psi. This mathematical method allows computation of all possible topological pathways consistent with the experimental data. We give a rigorous mathematical proof that, under reasonable biological assumptions, there are only three solutions to the tangle equations. One of the solutions corresponds to a synaptic complex with antiparallel alignment of recombination core sites, the other two correspond to parallel alignment of cores. We show that all three solutions can be unified into a single three-dimensional model for Xer recombination. Thus the three distinct mathematical solutions do not necessarily represent distinct three-dimensional pathways, and in this case the three distinct tangle solutions are different planar projections of the same three-dimensional configuration.

Electrostatic Interactions and the Folding of the Four-way DNA Junction: Analysis by Selective Methyl Phosphonate Substitution

The structure and dynamics of the four-way (Holliday) junction are strongly dependent on the presence of metal ions. In this study, the importance of phosphate charge in and around the point of strand exchange has been explored by selective replacement with electrically neutral methyl phosphonate groups, guided by crystal structures of the junction in the folded, stacked X conformation. Junction conformation has been analysed by comparative gel electrophoresis and fluorescence resonance energy transfer (FRET). Three of sets of phosphate groups on the exchanging strands have been analysed; those at the point of strand exchange and those to their 3' and 5' sides. The exchanging and 3' phosphate groups form a box of negatively charged groups on the minor groove face of the junction, while the 5' phosphate groups face each other on the major groove side, with their proR oxygen atoms directed at one another. The largest effects are observed on substitution of the exchanging phosphate groups; replacement of both groups leads to the loss of the requirement for addition of metal ions to allow junction folding. When the equivalent phosphate groups on the continuous strands were substituted, a proportion of the junction folded into the alternative conformer so as to bring these phosphate groups onto the exchanging strands. These species did not interconvert, and thus this is likely to result from the alternative diasteromeric forms of the methyl phosphonate group. This shows that some of the conformational effects result from more than purely electrostatic interactions. Smaller but significant effects were observed on substitution of the flanking phosphate groups. All methyl phosphonate substitutions at these positions allowed folding to proceed at a reduced concentration of magnesium ions, with double substitutions more effective than single substitutions. Substitution of 5' phosphates resulted in a greater degree of folding at a given ionic concentration compared to the corresponding 3' phosphate substitutions. These results show that the phosphate groups at the point of strand exchange exert the largest electrostatic effect on junction folding, but a number of phosphate groups in the vicinity of the exchange region contribute to the overall effects.

Control of Cre recombination by regulatory elements from Xer recombination systems

Site-specific recombination by the Cre recombinase takes place at a simple DNA site (loxP), requires no additional proteins and gives topologically simple recombination products. In contrast, cer and psi sites for Xer recombination contain approximately 150 bp of accessory sequences, require accessory proteins PepA, ArgR and ArcA, and the products are specifically linked to form a four-noded catenane. Here, we use hybrid sites consisting of accessory sequences of cer or psi fused to loxP to probe the function of accessory proteins in site-specific recombination. We show that PepA instructs Cre to produce four-noded catenane, but is not required for recombination at these hybrid sites. Mutants of Cre that require PepA and accessory sequences for efficient recombination were selected. PepA-dependent Cre gave products with a specific topology and displayed resolution selectivity. Our results reveal that PepA acts autonomously in the synapsis of psi and cer accessory sequences and is the main architectural element responsible for intertwining accessory site DNA. We suggest that accessory proteins can activate recombinases simply by synapsing the regulatory DNA sequences, thus bringing the recombination sites together with a specific geometry. This may occur without the need for protein-protein interactions between accessory proteins and the recombinases.

Low-resolution reconstruction of a synthetic DNA holliday junction

We have studied the low-resolution solution conformation of a Holliday (or four-way) DNA junction by using small-angle x-ray scattering, sedimentation velocity, and computational modeling techniques. The scattering data were analyzed in two independent ways: firstly, by rigid-body modeling of the scattering data using previously suggested models for the Holliday junction (HJ), and secondly, by ab initio reconstruction methods. The models found by both methods agree with experimentally determined sedimentation coefficients and are compatible with the results of previous studies using different techniques, but provide a more direct and accurate determination of the solution conformation of the HJ. Our results show that addition of Mg(2+) alters the conformation of the HJ from an extended to a stacked arrangement.

Functional analysis of the C-terminal domains of the site-specific recombinases XerC and XerD

The tyrosine family site-specific recombinases XerC and XerD convert dimers of the Escherichia coli chromosome and many natural plasmids to monomers. The heterotetrameric recombination complex contains two molecules of XerC and two of XerD, with each recombinase mediating one pair of DNA strand exchanges. The two pairs of strand exchanges are separated in time and space. This demands that the catalytic activity of the four recombinase molecules be controlled so that only XerC or XerD is active at any given time, there being a switch in the recombinase activity state at the Holliday junction intermediate stage. Here, we analyse chimeras and deletion variants within the recombinase C-terminal domains in order to probe determinants that may be specific to either XerC or XerD, and to further understand how XerC-XerD interactions control catalysis in a recombining heterotetramer. The data confirm that the C-terminal "end" region of each recombinase plays an important role in coordinating catalysis within the XerCD heterotetramer and suggest that the interactions between the end regions of XerC and XerD and their cognate receptors within the partner recombinase are structurally and functionally different. The results support the hypothesis that the "normal" state in the heterotetrameric complex, in which XerC is catalytically active and XerD is inactive, depends on the interactions between the C-terminal end region of XerC and its receptor region within the C-terminal domain of XerD; interference with these interactions leads to a switch in the catalytic state, so that XerD is now preferentially active.

Switching catalytic activity in the XerCD site-specific recombination machine

The tyrosine family site-specific recombinases, XerCD, function in the conversion of circular dimer replicons to monomers. In the recombining complex that contains two synapsed recombination sites and two molecules each of XerC and XerD, the DNA strand-exchange reactions are separated in time and space. XerC initiates recombination to form a Holliday junction intermediate, which undergoes a conformational change to provide a substrate for strand exchange by XerD. XerCD are two-domain proteins, whose C-terminal domains contain all of the catalytic residues. We show that XerC or XerD variants lacking their N-terminal domains are active in recombination when combined with their wild-type partner. Nevertheless, the normal pattern of catalysis is dramatically altered; strand exchange by the recombinase variant is stimulated, while that by the wild-type partner recombinase is impaired. The primary determinants for the mutant phenotype reside in the region of alpha-helix B of XerD. We propose that altered interactions within the recombining heterotetramer lead to changes in the relative concentrations of the two alternative Holliday junction substrates that are recombined by XerC or XerD, respectively.

Stability by multimer resolution of pJHCMW1 is due to the Tn1331 resolvase and not to the Escherichia coli Xer system

The plasmid pJHCMW1 encodes resistance to several aminoglycosides and beta-lactams and consists of a copy of the transposon Tn1331, a region including the replication functions, and a sequence with homology to ColE1 cer, designated mwr. In this work, the role of this cer-like site in ensuring the stable inheritance of pJHCMW1 by multimer resolution was studied. The Escherichia coli Xer site-specific recombination system acts at sites such as ColE1 cer to resolve plasmid multimers formed by homologous recombination, thereby maintaining plasmids in a monomeric state and helping to ensure stable plasmid inheritance. Despite its high similarity to ColE1 cer, the pJHCMW1 mwr was a poor substrate for Xer recombination in E. coli and did not contribute significantly to plasmid stability. Instead, the Tn1331 co-integrate resolution system was highly active at resolving pJHCMW1 multimers and ensured the stable inheritance of pJHCMW1. Although Xer recombination at pJHCMW1 mwr was inefficient in E. coli, the recombination that did occur was dependent on ArgR, PepA, XerC and XerD. A supercoiled circular DNA molecule containing two pJHCMW1 mwr sites in direct repeat yielded Holliday-junction-containing product when incubated with ArgR, PepA, XerC and XerD in vitro, confirming that pJHCMW1 mwr is a functional recombination site. However, unlike cer, some Holliday-junction-containing product could be detected for mwr in the absence of ArgR, although addition of this protein resulted in formation of more Holliday junctions. Binding experiments demonstrated that XerD bound to pJHCMW1 mwr core with a high affinity, but that XerC bound to this site very poorly, even in the presence of XerD.

Reciprocal control of catalysis by the tyrosine recombinases XerC and XerD: an enzymatic switch in site-specific recombination

In Xer site-specific recombination, sequential DNA strand exchange reactions are catalyzed by a heterotetrameric complex composed of two recombinases, XerC and XerD. It is demonstrated that XerC and XerD catalytic activity is controlled by an interaction involving the C-terminal end of each protein (the donor region) and an internal region close to the active site (the acceptor region). Mutations in these regions reciprocally alter the relative activity of XerC and XerD, with their combination producing synergistic effects on catalysis. The data support a model in which C-terminal intersubunit interactions contribute to coupled protein-DNA conformational changes that lead to sequential activation and reciprocal inhibition of pairs of active sites in the recombinase tetramer during recombination.

Xer site-specific recombination. DNA strand rejoining by recombinase XerC

Xer site-specific recombination functions in the stable maintenance of circular replicons in Escherichia coli. Each of two related recombinase proteins, XerC and XerD, cleaves a specific pair of DNA strands, exchanges them, and rejoins them to the partner DNA molecule during a complete recombination reaction. The rejoining activity of recombinase XerC has been analyzed using isolated covalent XerC-DNA complexes resulting from DNA cleavage reactions upon Holliday junction substrates. These covalent protein-DNA complexes are competent in the rejoining reaction, demonstrating that covalently bound XerC can catalyze strand rejoining in the absence of other proteins. This contrasts with a recombinase-mediated cleavage reaction, which requires the presence of both recombinases, the recombinase mediating catalysis at any given time requiring activation by the partner recombinase. In a recombining nucleoprotein complex, both cleavage and rejoining can occur prior to dissociation of the complex.

Site-specific recombination at dif by Haemophilus influenzae XerC

Xer site-specific recombination at the Escherichia coli chromosomal site dif converts chromosomal dimers to monomers, thereby allowing chromosome segregation during cell division. dif is located in the replication terminus region and binds the E. coli site-specific recombinases EcoXerC and EcoXerD. The Haemophilus influenzae Xer homologues, HinXerC and HinXerD, bind E. coli dif and exchange strands of dif Holliday junctions in vitro. Supercoiled dif sites are not recombined by EcoXerC and EcoXerD in vitro, possibly as a consequence of a regulatory process, which ensures that in vivo recombination at dif is confined to cells that can initiate cell division and contain dimeric chromosomes. In contrast, the combined action of HinXerC and EcoXerD supports in vitro recombination between supercoiled dif sites, thereby overcoming the barrier to dif recombination exhibited by EcoXerC and EcoXerD. The recombination products are catenated and knotted molecules, consistent with recombination occurring with synaptic complexes that have entrapped variable numbers of negative supercoils. Use of catalytically inactive recombinases provides support for a recombination pathway in which HinXerC-mediated strand exchange between directly repeated duplex dif sites generates a Holliday junction intermediate that is resolved by EcoXerD to catenated products. These can undergo a second recombination reaction to generate odd-noded knots.

Catalytic and binding mutants of the junction-resolving enzyme endonuclease I of bacteriophage t7: role of acidic residues

Endonuclease I is a 149 amino acid protein of bacteriophage T7 that is a Holliday junction-resolving enzyme, i.e. a four-way junction-selective nuclease. We have performed a systematic mutagenesis study of this protein, whereby all acidic amino acids have been individually replaced by other residues, mainly alanine. Out of 21 acidic residues, five (Glu20, Glu35, Glu65, Asp55 and Asp74) are essential. Replacement of these residues by other amino acids leads to a protein that is inactive in the cleavage of DNA junctions, but which nevertheless binds selectively to DNA junctions. The remaining 16 acidic residues can be replaced without loss of activity. The five critical amino acids are located within one section of the primary sequence. It is rather likely that their function is to bind one or more metal ions that coordinate the water molecule that brings about hydrolysis of the phosphodiester bond. We have also constructed a mutant of endonuclease I that lacks nine amino acids (six of which are arginine or lysine) at the C-terminus. Unlike the acidic point mutants, the C-terminal truncation is unable to bind to DNA junctions. It is therefore likely that the basic C-terminus is an important element in binding to the DNA junction.

Linkage map of Escherichia coli K-12, edition 10: the traditional map

This map is an update of the edition 9 map by Berlyn et al. (M. K. B. Berlyn, K. B. Low, and K. E. Rudd, p. 1715-1902, in F. C. Neidhardt et al., ed., Escherichia coli and Salmonella: cellular and molecular biology, 2nd ed., vol. 2, 1996). It uses coordinates established by the completed sequence, expressed as 100 minutes for the entire circular map, and adds new genes discovered and established since 1996 and eliminates those shown to correspond to other known genes. The latter are included as synonyms. An alphabetical list of genes showing map location, synonyms, the protein or RNA product of the gene, phenotypes of mutants, and reference citations is provided. In addition to genes known to correspond to gene sequences, other genes, often older, that are described by phenotype and older mapping techniques and that have not been correlated with sequences are included.

Coordinated actions of RuvABC in Holliday junction processing

The RuvA, RuvB and RuvC proteins of Escherichia coli process Holliday junctions during genetic recombination and DNA repair. Biochemical studies have shown that RuvA and RuvB promote branch migration whereas RuvC resolves junctions by endonucleolytic cleavage. Here we show that RuvAB stimulate Holliday junction resolution by RuvC. Elevated RuvC activity was dependent upon RuvAB-mediated ATP-hydrolysis. These results show that the three Ruv proteins work in a coordinated manner to promote Holliday junction resolution, and account for the resolvase-defective phenotype exhibited by ruvA, ruvB or ruvC mutant strains.

Complete nucleotide sequence of the Hsd plasmid pECO29 and identification of its functional regions

The complete nucleotide sequence of the Hsd plasmid pECO29 has been determined. The plasmid DNA consists of 3895 base pairs. These include 4 genes and 5 sites. Two genes encoding the proteins (restriction endonuclease and DNA methyltransferase) have been fully characterized. The pECO29 comprises a Co1El-type replication system coding for untranslated genes RNAI and RNAII, the emr recombination site containing palindromic sequences and involved in stable maintenance of the plasmid, two pseudo oriT sites homologous to the oriT site of R64 and F plasmids, as well as the bom locus of a Co1El-like plasmid. There are no genes involved in the mobilization of pECO29 plasmid.

Holliday junction resolvase in Schizosaccharomyces pombe has identical endonuclease activity to the CCE1 homologue YDC2

A novel Holliday junction resolving activity has been identified in fractionated cell extracts of the fission yeast Schizosaccharomyces pombe . The enzyme catalyses endonucleolytic cleavage of Holliday junction-containing chi DNA and synthetic four-way DNA junctions. The activity cuts with high specificity a synthetic four-way junction containing a 12 bp core of homologous sequences but has no activity on another four-way junction (with a fixed crossover point), a three-way junction, linear duplex DNA or duplex DNA containing six mismatched nucleotides in the centre. The major cleavage sites map as single nicks in the vicinity of the crossover point, 3' of a thymidine residue. These data indicate that the activity has a strong DNA structure selectivity as well as a limited sequence preference; features similar to the Holliday junction resolving enzymes RuvC of Escherichia coli and the mitochondrial CCE1 (cruciform-cuttingenzyme 1) of Saccharomyces cerevisiae. A putative homologue of CCE1 in S.pombe (YDC2_SCHPO) has been identified through a search of the sequence database. The open reading frame of this gene has been cloned and the encoded protein, YDC2, expressed in E.coli . The purified recombinant YDC2 exhibits Holliday junction resolvase activity and is, therefore, a functional S.pombe homologue of CCE1. The resolvase YDC2 shows the same substrate specificity and produces identical cleavage sites as the activity obtained from S. pombe cells. Both YDC2 and the cellular activity cleave Holliday junctions in both orientations to give nicks that can be ligated in vitro. The partially purified Holliday junction resolving enzyme in fission yeast is biochemically indistinguishable from recombinant YDC2 and appears to be the same protein.

Exchange between stacking conformers in a four-Way DNA junction

Four-way DNA junctions undergo metal ion-induced folding by means of pairwise coaxial stacking of helical arms in one of two possible conformers that depend on the choice of stacking partners. For most such junctions there is a significant bias toward one conformer over the other. In this study we have characterized a four-way DNA junction in which there is rapid exchange between equal populations of the two possible stacking conformers. Analysis of the global conformation using comparative gel electrophoresis gives results consistent with either a tetrahedral disposition of the four arms or an equilibrium between equal populations of the two alternative stacked X-structures. Protection of bases at the center of the junction against attack by osmium tetroxide indicates that base stacking is preserved through the point of strand exchange. Cleavage across the point of strand exchange by the restriction enzyme MboII is consistent with pairwise coaxial stacking of helical arms. Taken together, these indicate that the junction adopts the stacked X-structure, but unusually there appears to be little bias for one stacking conformer over the other. Complete digestion of junctions by MboII demonstrates that all the molecules in solution pass through a given conformer during the time of incubation, demonstrating that exchange between conformers must occur. This is true even for minor stacking conformers in strongly biased junctions. Comparative gel electrophoresis shows that sequence changes at the third position out from the point of strand exchange can have a marked influence on the relative stability of the stacking conformers.

Cell division is required for resolution of dimer chromosomes at the dif locus of Escherichia coli

The dif locus is a RecA-independent resolvase site in the terminus region of the chromosome of Escherichia coli. The locus reduces dimer chromosomes, which result from sister chromatid exchange, to monomers. A density label assay demonstrates that recombination occurs at dif, and that it requires XerC and XerD. The frequency of this recombination is approximately 14% per site per generation, which is doubled in polA12 mutants. We have determined that recombination occurs late in the cell cycle, and that resolution is blocked if cell division is inhibited with cephalexin or by a ftsZts mutation. Fluorescence microscopy has demonstrated that abnormal nucleoids are present in cells incubated in cephalexin, and this is increased in polA12 mutants.

The ParB protein encoded by the RP4 par region is a Ca(2+)-dependent nuclease linearizing circular DNA substrates

The parCBA operon, which together with the parDE operon constitutes an efficient stabilization system of the broad-host-range plasmid RP4, encodes a 20 kDa polypeptide (ParB), which exhibits sequence homology to nucleases. The ParB protein was overexpressed by means of an inducible tac-promoter system. Plate assays with herring sperm DNA as substrate provided evidence for nuclease activity. The ParB nuclease shows specificity for circular DNA substrates and linearizes them regardless of the presence in cis of parts of the RP4 partitioning region. The nuclease activity in vitro is stimulated by the presence of Ca2+ ions. EDTA (5 mM) completely inhibits nuclease activity. By restriction analysis of the ParB-linearized products, cleavage of circular DNA substrates taking place preferentially at specific sites was demonstrated. Run-off sequencing and primer extension analysis of ParB-linearized plasmid DNA revealed a specific target for ParB action adjacent to an AT-rich region containing palindromic sequence elements on a pBR322-derived plasmid.

Structure-function correlations in the XerD site-specific recombinase revealed by pentapeptide scanning mutagenesis

Xer-mediated site-specific recombination contributes to the stability of circular chromosomes in bacteria by resolving plasmid multimers and chromosome dimers to monomers prior to cell division. Two related site-specific recombinases, XerC and XerD, each catalyse one pair of strand exchange during Xer recombination. In order to relate the recently determined structure of XerD to its function, the XerD protein was subjected to pentapeptide scanning mutagenesis, which leads to a variable five amino acid cassette being introduced randomly into the target protein. This has allowed identification of regions of XerD involved in specific DNA binding, in communicating with the partner recombinase, XerC, and in catalysis and its control. The C-terminal domain of XerD, comprising two-thirds of the protein, contains the catalytic active site and comprises ten alpha helices (alphaE to alphaN) and a beta hairpin. A flexible linker connects this domain to the N-terminal domain that comprises four alpha helices (alphaA to alphaD). Pentapeptide insertions into alphaB, alphaD, alphaG, or alphaJ interfered with DNA binding. Helices alphaG and alphaJ comprise a pseudo helix-turn-helix DNA binding motif that may provide specificity of recombinase binding. An insertion in alphaL, adjacent to an active site arginine residue, led to loss of cooperative interactions between XerC and XerD and abolished recombination activity. Other insertions close to active site residues also abolished recombination activity. Proteins with an insertion in the beta hairpin turn bound DNA, interacted cooperatively with XerC and had a phenotype that is consistent with the protein being defective in XerD catalysis. This beta hairpin appears to be highly conserved in related proteins. Insertions at a number of dispersed locations did not impair XerD catalytic activity or DNA binding, but failed to allow XerC catalysis in vivo, indicating that several sites of interaction between XerD and XerC may be important for activation of XerC catalysis by XerD.

Nucleic acid structure and recognition

We review the global structures adopted by branched nucleic acids, including three- and four-way helical junctions in DNA and RNA. We find that some general folding principles emerge. First, all the structures exhibit a tendency to undergo pairwise coaxial helical stacking when permitted by the local stereochemistry of strand exchange. Second, metal ions generally play an important role in facilitating folding of branched nucleic acids. These principles can be applied to functionally important branched nucleic acids, such as the Holliday DNA junction of genetic recombination, and the hammerhead ribozyme in RNA.

Transposition and site-specific recombination: adapting DNA cut-and-paste mechanisms to a variety of genetic rearrangements

In bacteria, two categories of specialised recombination promote a variety of DNA rearrangements. Transposition is the process by which genetic elements move between different locations of the genome, whereas site-specific recombination is a reaction in which DNA strands are broken and exchanged at precise positions of two target DNA loci to achieve determined biological function. Both types of recombination are represented by diverse genetic systems which generally encode their own recombination enzymes. These enzymes, generically called transposases and site-specific recombinases, can be grouped into several families on the basis of amino acid sequence similarities, which, in some cases, are limited to a signature of a few residues involved in catalysis. The well characterised site-specific recombinases are found to belong to two distinct groups whereas the transposases form a large super-family of enzymes encompassing recombinases from both prokaryotes and eukaryotes. In spite of important differences in the catalytic mechanisms used by these three classes of enzymes to cut and rejoin DNA molecules, similar strategies are used to coordinate the biochemical steps of the recombination reaction and to control its outcome. This review summarises our current understanding of transposition and site-specific recombination, attempting to illustrate how relatively conserved DNA cut-and-paste mechanisms can be used to bring about a variety of complex DNA rearrangements.

Effect of DNA topology on Holliday junction resolution by Escherichia coli RuvC and bacteriophage T7 endonuclease I

Holliday junctions are key intermediates in homologous genetic recombination. Their resolution requires specialised nucleases that nick pairs of strands at the junction point, leading to the separation of mature recombinants. Resolution occurs in either of two orientations, according to which DNA strands are cut. We show that DNA topology can determine the efficiency and outcome of a recombination reaction. Using two Holliday junction resolvases, Escherichia coli RuvC protein and T7 endonuclease I, we observed that supercoiled figure-8 DNA molecules containing Holliday junctions were resolved with a specific orientation bias, and that this bias was reversed by the presence of a topological tether (catenation). In contrast, when all topological constraints were removed by restriction digestion, the recombination intermediates were resolved equally in the two orientations. These results show that topological constraints affecting Holliday junction structure influence the orientation of resolution by cellular resolvases.

Recognition and manipulation of branched DNA structure by junction-resolving enzymes

The junction-resolving enzymes are a class of nucleases that introduce paired cleavages into four-way DNA junctions. They are important in DNA recombination and repair, and are found throughout nature, from eubacteria and their bacteriophages through to higher eukaryotes and their viruses. These enzymes exhibit structure-selective binding to DNA junctions; although cleavage may be more or less sequence-dependent, binding affinity is purely related to the branched structure of the DNA. Binding and cleavage events can be separated for a number of the enzymes by mutagenesis, and mutant proteins that are defective in cleavage while retaining normal junction-selective binding have been isolated. Critical acidic residues have been identified in several resolving enzymes, suggesting a role in the coordination of metal ions that probably deliver the hydrolytic water molecule. The resolving enzymes all bind to junctions in dimeric form, and the subunits introduce independent cleavages within the lifetime of the enzyme-junction complex to ensure resolution of the four-way junction. In addition to recognising the structure of the junction, recent data from four different junction-resolving enzymes indicate that they also manipulate the global structure. In some cases this results in severe distortion of the folded structure of the junction. Understanding the recognition and manipulation of DNA structure by these enzymes is a fascinating challenge in molecular recognition.

Near-simultaneous DNA cleavage by the subunits of the junction-resolving enzyme T4 endonuclease VII

In common with a number of other DNA junction-resolving enzymes, endonuclease VII of bacteriophage T4 binds to a four-way DNA junction as a dimer, and cleaves two strands of the junction. We have used a supercoil-stabilized cruciform substrate to probe the simultaneity of cleavage at the two sites. Active endonuclease VII converts the supercoiled circular DNA directly into linear product, indicating that the two cleavage reactions must occur within the lifetime of the protein-junction complex. By contrast, a heterodimer of active enzyme and an inactive mutant endonuclease VII leads to the formation of nicked circular product, showing that the subunits operate fully independently.

Purification and characterization of HP1 Cox and definition of its role in controlling the direction of site-specific recombination

The protein that activates site-specific excision of the HP1 genome from the Hemophilus influenzae chromosome, HP1 Cox, was purified. Native Cox consists of four 8.9-kDa protomers. Tetrameric Cox self-associates to octamers; the apparent dissociation constant was 8 microM protomer, suggesting that under reaction conditions Cox is largely tetrameric. Cox binding sites consist of two direct repeats of the consensus motif 5'-GGTMAWWWWA; one Cox tetramer binds to each motif. Cox binding interfered with the interaction of HP1 integrase with one of its binding sites, IBS5. This competition is central to directional control, as shown by studies on mutated sites. Both Cox binding sites were necessary for Cox to fully inhibit integration and activate excision, although Cox continued to affect recombination when the single binding site proximal to IBS5 remained intact. Eliminating the IBS5 site completely prevented integration but greatly enhanced excision. Excisive recombination continued to require Cox even when IBS5 was inactivated. Cox must therefore play a positive role in assembling the nucleoprotein complexes producing excisive recombination, by inducing the formation of a critical conformation in those complexes.

The resolving enzyme CCE1 of yeast opens the structure of the four-way DNA junction

Junction-resolving enzymes exhibit structure-selective binding to DNA, but may also manipulate the DNA structure. CCE1 is a junction-resolving enzyme found in the yeast mitochondrion. To facilitate the analysis of the CCE1-junction interaction, we have exploited the sequence dependence of the cleavage reaction to devise a junction that is refractory to cleavage by this enzyme, even in the presence of magnesium ions. On binding to four-way DNA junctions, pure recombinant CCE1 opens the global structure into a 4-fold symmetrical configuration of arms with an open, chemically reactive centre. The structure of the CCE1-junction complex is independent of the sequence of the junction, and of the presence or absence of magnesium or other ions. This and other functional properties of CCE1 are strikingly similar to those of RuvC resolving enzyme of Escherichia coli.

Binding and cleavage of nicked substrates by site-specific recombinases XerC and XerD

In Xer site-specific recombination two related recombinases, XerC and XerD, catalyse strand cleavage and rejoining reactions at a site, dif, in order to ensure normal chromosome segregation during cell division in Escherichia coli. We have used nicked suicide substrates to trap reaction intermediates and show that XerC cleaves the top strand efficiently while XerD is less efficient at cleaving the bottom strand of dif. Recombinase-mediated cleavage positions are separated by six base pairs and occur at either end of the dif central region adjacent to the recombinase binding sites. XerC can cleave the top strand of dif inefficiently in the absence of its partner recombinase during a reaction that does not require intermolecular synapsis. The presence of a nick in the bottom strand of dif allows cooperative interactions between two XerC protomers bound to adjacent binding sites, suggesting that a conserved interaction domain is present in both XerC and XerD. Cooperativity between two identical recombinase protomers does not occur on un-nicked linear DNA. Ethylation interference footprinting of two XerD catalytic mutant proteins suggests that the conserved domain II arginine from the integrase family RHRY tetrad may make direct contact with the scissile phosphate.

T4 endonuclease VII. Importance of a histidine-aspartate cluster within the zinc-binding domain

The DNA junction-resolving enzyme endonuclease VII of bacteriophage T4 contains a zinc-binding region toward the N-terminal end of the primary sequence. In the center of this 39-amino acid section (between residues 38 and 44) lies the sequence HLDHDHE, termed the His-acid cluster. Closely related sequences are found in three other proteins that have similar zinc-binding motifs. We have analyzed the function of these residues by a site-directed mutagenesis approach, modifying single amino acids and studying the properties of the resulting N-terminal protein A fusions. No sequence changes within the His-acid cluster led to a change in zinc content of the protein, indicating that these residues are not involved in the coordination of zinc. We found that the N-terminal aspartate residue (Asp-40) and the two histidine residues (His-41 and His-43) within the cluster are essential for junction-cleavage activity of the proteins. However, all sequence variations within this region generate proteins that retain their ability to bind to four-way DNA junctions (with minor changes in binding affinity in some cases) and to distort their global structure in the same manner as active enzymes. We conclude that the process of cleavage can be uncoupled from those of binding to and distortion of the junction. It is probable that some amino acid side chains of the His-acid cluster participate in the phosphodiester cleavage mechanism of endonuclease VII. The essential aspartate residue might be required for coordination of catalytic metal ions.